21/12/2011
Ins-30034 OEM Magstripe 1000 compact system
Suitability
Security-sensitive doors
Mounted on metal surface
Wet environments
Compatible with any Track 2 ISO magstripe card
Fitting
Wiring
Exit
Exit button
(push to make)
0V
+12V
12V DC power supply
+12V 0V
Electric release
0V
12V DC release current rating must be less than 1A.
Master Card - must be swiped when the system is first switched on
1 3 4 2
Mast
user
p
2. T o r resent e-
to
ca
1. A
the to rd to t insta ens
the r lla tion, en. ade te in this ea der
pre r fo a llow user pa
to ck.
ed b ent ca to en lida y the rd er C se nt this te ard on iser
’s name ader
, then
Master Card rd, write the swi pe swi pe
1. T o enrol a user ca a pa swi pe the user card wi ll beep
, w ait for the required aga in, the bleeping wi
2. T o set the door open reader swi pe the card ll s top
.
the
BEEP!
BEEP!
alidate en,
Master Card y the
1. A t installati
the tok
2. T o redate a user tok vali his enrolment card
to the
user tok
1. Take the master card from the new pack of paper shadow cards.
2. Swipe the master card through the reader.
3. The reader beeps and the LED's light up as the master card is acknowledged.
4. The pack is now ready for adding cards.
Issuing tokens
1
Swipe th
Write na me: is card to
bar:
John Smith
2 3
John mith
4
W rite name:
Swipe this card to bar:
John Smith
1. Write the name of the user on a shadow card.
2. Swipe the shadow card through the reader.
3. Swipe the chosen user card through the reader - it is now enrolled.
4. Store the shadow card in a safe place.
Bar a user
1 2 3 4
John
Sm ith
User
Card
John Smith
Swipe this card to bar:
W rite name:
1. When a card is lost or stolen it is important to bar the card from your system to avoid unauthorized access.
2. To bar a card or token take it's corresponding shadow card from the card pack.
3. Present the shadow card to the reader. This will remove the lost card or token from your system.
4. A barred card can re-validated by presenting the enrolment card followed by the user card to the reader.
5. Alternatively a different user card can be swiped which will then pair that user card with the paper shadow card.
Fail Open release card - (Unit default = Fail Closed)
1 2 3
BEEP! se ail open
to ere a f
Present the
FUNCTION CARD or a d operation maglock. ail close rd is used of release the f a fire. Present the ca card again
Paxton
Access
4
BEEP!
THIS CARD CAN ONLY BE USED WITH A FAIL OPEN LOCK.
1. Take the fail open release function card from the starter pack.
2. Present/swipe the card through the reader. The reader will beep for about a second.
3. The reader is now set to fail open mode. This allows safe operation of the door in case of fire: The lock will
release when the power is cut.
4. To revert to fail closed mode, swipe the card again and the reader will beep once.
Door open time (Unit default = 7 seconds)
1 2 3 again, the bl will beep 2. T o set the door car d thr car d, swi
1. T o enr ough the r pe it thr ol a user eepi
, w ait for ng will stop
the r
open ti eader ough the r car d, wr
Mast er Card equir ed per me: s wipe this car iod, swipe the car d, the r ead ite t er he use
, then swip r’s name on a paper e the user eader
BEEP!
BEEP!
’s name the user
, then on a paper card, the rea der
Master Card period, swipe the card time: swipe this
1. T o enrol card, swipe it through card through the
2. T o set the will again, door ait f open the bleeping will stop
4 agai wi ll be
bl ee ng
, w ep
T se the wi ll stop for the
door ope card through card,
swipe
T o enrol the
re ade r. re d pe swi od, pe
thi
swi card, pe
the
card
the
re ade card, the
re ade wri r, the
use
Mast er card n swi pe
the
use
on pape
1. Take the master card from the starter pack.
2. Swipe the card through the reader. The reader will start beeping.
3. Wait for the required period you wish the door to remain open.
4. Swipe the card again at the end of the period to set the open time. The beeping will stop.
Adding a new pack of shadow cards (up to 4)
1 2 3 ent card
CARDLOCK reader to s t thi validate
to ken, y the
1. card to the
the to kens in this pack
-validate a user
2. To re
present this
to the reader fo
user to ken.
+ BEEP!
BEEP!
r’s name on a paper d r.
Master Card
1.
To enrol a user card, write the use card through the reade
2.
To set the door open time: swipe this car will bee again, the bleeping will stop
BEEP!
BEEP!
4 r’s name on a paper d, swipe the card
Master Card r.
card, swipe it through the reade p, wait for the required perio
2.
To set the door open time: swipe this ca
1. Take the master card from the original card pack.
2. Swipe the original master card.
3. Swipe the master card from the new pack you wish to enrol.
4. The new pack is now enrolled. Return both master cards to their respective packs.
- Up to 4 shadow card packs can be enrolled onto the system.
To delete a card pack
1. Card packs may be deleted from the system if required. Once a card pack has been deleted another one may
be enrolled in its place.
2. To delete a card pack, take the master card and swipe it backwards through the reader.
3. Swipe the master card backwards again and the reader LED's will go out. After 5 seconds the reader will beep
and the LED's will come back on.
4. The card pack will now have been removed from the system.
Factory reset
1. Power down the unit.
2. Press and hold down the exit button.
3. Power up the unit. After 3 seconds the Red LED will come on and the unit beeps.
4. The unit will then reset and all the LED's will come on.
5. Release the exit button.
Compatible with any Track 2 ISO magstripe card
User cards are NOT supplied with this unit. Please supply your own user cards.
Environment
Operating temperature
Cable length
IP Rating
Voltage
Current
Maximum load output current
Magnetic stripe coercivity
Number of Cards
Number of Card Packs
Dimensions
Reader
Specifications
Min
-20 °C
IPX7
1,000,000
Min
11V DC
90 mA
300 Oe
Width
34 mm
Max
+55 °C
Max
14V DC
110 mA
1 A
4000 Oe
1000
4 x 250
Height
89 mm
3 metres
Outdoor use
Swipes
Lo-Co & Hi-Co
Depth
34 mm
