Denon AVR-2312CI Network Card User Manual

ESPAÑOL
FRANÇAIS
ENGLISH
INTEGRATED NETWORK AV RECEIVER
AVR-2312CI
v
CD-ROM
•Explains all operations of your receiver. Open the included CD-ROM on
your computer for detailed operating instructions.
Getting Started
Explains how to easily install, connect and setup a 5.1-channel home theater system.
Mise en route
Explique comment installer, connecter et configurer facilement un système de home
cinéma 5.1 canaux.
•Explique tout le fonctionnement de votre récepteur. Ouvrez le CD-ROM
inclus sur votre ordinateur pour pouvoir consulter la notice d'utilisation
détaillée.
Antes de empezar
Explica cómo instalar, conectar y configurar fácilmente un sistema de cine en casa de
5.1 canales.
•Explica todas las operaciones del receptor. Abra el CD-ROM en el
ordenador para ver instrucciones detalladas de funcionamiento.
zzD&M Holdings is striving to be a paperless company in order to help preserve the environment. Your cooperation and understanding is appreciated.
zzD&M Holdings s’efforce d’être une société “sans papier” afin de contribuer à préserver l’environnement. Nous sommes sensibles à votre coopération et votre compréhension.
zzD&M Holdings se esfuerza por ser una empresa sin papel para ayudar a conservar el medio ambiente. Se valora su cooperación y comprensión.
ESPAÑOL
nSAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
HOT SURFACE. DO NOT TOUCH.
Hot
surface
mark
The top surface over the internal heat sink may become hot
when operating this product continuously.
Do not touch hot areas, especially around the “Hot surface
mark” and the top panel.
PRECAUTION:
SURFACE CHAUDE. NE PAS TOUCHER.
La surface supérieure du dissipateur de chaleur peut devenir
chaude si vous utilisez ce produit en continu.
Ne touchez pas les zones chaudes, tout particulièrement vers
l’inscription “Hot surface mark” et le panneau supérieur.
PRECAUCIÓN:
SUPERFICIE CALIENTE. NO TOCAR.
La superficie superior sobre el disipador de calor interno
podría llegar a calentarse al operar este producto de forma
continua.
No toque las áreas calientes, especialmente las situadas
alrededor de la “Hot surface mark” y del panel superior.
1.
2.
3.
4.
5.
6.
7.
8.
IMPORTANT SAFETY
INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15.Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION:
To completely disconnect this product from the mains, disconnect
the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power supply to
the unit and must be within easy access by the user.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur,
débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y accéder
facilement.
PRECAUCIÓN:
FRANÇAIS
ENGLISH
FCC INFORMATION (For US customers)
1.COMPLIANCE INFORMATION
Product Name: Integrated Network AV Receiver
Model Number: AVR-2312CI
This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
Denon Electronics (USA), LLC
(a D & M Holdings Company)
100 Corporate Drive
Mahwah, NJ 07430-2041
Tel. (800) 497-8921
2.IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained
in this manual, meets FCC requirements. Modification not expressly
approved by DENON may void your authority, granted by the FCC, to use
the product.
3.IMPORTANT
When connecting this product to network hub or router, use only a
shielded STP or ScTP LAN cable which is available at retailer.
Follow all installation instructions. Failure to follow instructions could void
your authority, granted by the FCC, to use the product.
4.NOTE
This product has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user
is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the product into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the local retailer authorized to distribute this type of product or
an experienced radio/TV technician for help.
For Canadian customers:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Para desconectar completamente este producto de la alimentación
eléctrica, desconecte el enchufe del enchufe de la pared.
El enchufe de la alimentación eléctrica se utiliza para interrumpir
por completo el suministro de alimentación eléctrica a la unidad
y debe de encontrarse en un lugar al que el usuario tenga fácil
acceso.
I
ENGLISH
FRANÇAIS
ESPAÑOL
nNOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO
WARNINGS
AVERTISSEMENTS
ADVERTENCIAS
•Avoid high temperatures.
Allow for sufficient heat dispersion when installed in
a rack.
•Handle the power cord carefully.
Hold the plug when unplugging the cord.
•Keep the unit free from moisture, water, and dust.
•Unplug the power cord when not using the unit for
long periods of time.
•Do not obstruct the ventilation holes.
•Do not let foreign objects into the unit.
•Do not let insecticides, benzene, and thinner come
in contact with the unit.
•Never disassemble or modify the unit in any way.
•Ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, tablecloths or curtains.
•Naked flame sources such as lighted candles
should not be placed on the unit.
•Observe and follow local regulations regarding
battery disposal.
•Do not expose the unit to dripping or splashing
fluids.
•Do not place objects filled with liquids, such as
vases, on the unit.
•Do not handle the mains cord with wet hands.
•When the switch is in the OFF (STANDBY)
position, the equipment is not completely switched
off from MAINS.
•The equipment shall be installed near the
power supply so that the power supply is easily
accessible.
•Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
•Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du cordon.
•Protéger l’appareil contre l’humidité, l’eau et la
poussière.
•Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
•Ne pas obstruer les trous d’aération.
•Ne pas laisser des objets étrangers dans l’appareil.
•Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
•Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
•Ne pas recouvrir les orifices de ventilation avec des
objets tels que des journaux, nappes ou rideaux.
Cela entraverait la ventilation.
•Ne jamais placer de flamme nue sur l'appareil,
notamment des bougies allumées.
•Veillez à respecter les lois en vigueur lorsque vous
jetez les piles usagées.
•L’appareil ne doit pas être exposé à l’eau ou à
l’humidité.
•Ne pas poser d’objet contenant du liquide, par
exemple un vase, sur l’appareil.
•Ne pas manipuler le cordon d’alimentation avec les
mains mouillées.
•Lorsque l’interrupteur est sur la position OFF
(STANDBY), l’appareil n’est pas complètement
déconnecté du SECTEUR (MAINS).
•L’appareil sera installé près de la source
d’alimentation, de sorte que cette dernière soit
facilement accessible.
•Evite altas temperaturas.
Permite la suficiente dispersión del calor cuando
está instalado en la consola.
•Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón
de energía.
•Mantenga el equipo libre de humedad, agua y
polvo.
•Desconecte el cordón de energía cuando no utilice
el equipo por mucho tiempo.
•No obstruya los orificios de ventilación.
•No deje objetos extraños dentro del equipo.
•No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
•Nunca desarme o modifique el equipo de ninguna
manera.
•La ventilación no debe quedar obstruida por
haberse cubierto las aperturas con objetos como
periódicos, manteles o cortinas.
•No deberán colocarse sobre el aparato fuentes
inflamables sin protección, como velas encendidas.
•A la hora de deshacerse de las pilas, respete la
normativa para el cuidado del medio ambiente.
•No exponer el aparato al goteo o salpicaduras
cuando se utilice.
•No colocar sobre el aparato objetos llenos de
líquido, como jarros.
•No maneje el cable de alimentación con las manos
mojadas.
•Cuando el interruptor está en la posición OFF
(STANDBY), el equipo no está completamente
desconectado de la alimentación MAINS.
•El equipo se instalará cerca de la fuente de
alimentación de manera que resulte fácil acceder
a ella.
II
nCAUTIONS ON INSTALLATION
PRÉCAUTIONS D’INSTALLATION
EMPLAZAMIENTO DE LA INSTALACIÓN
z
z
z
z
Wall
Paroi
Pared
zzFor proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
•More than 12 in. (0.3 m) is recommended.
•Do not place any other equipment on this unit.
zzPour permettre la dissipation de chaleur requise, n’installez
pas cette unité dans un espace confiné tel qu’une bibliothèque
ou un endroit similaire.
•Une distance de plus de 0,3 m (12 po) est recommandée.
•Ne placez aucun matériel sur cet appareil.
zzPara la dispersión del calor adecuadamente, no instale este
equipo en un lugar confinado tal como una librería o unidad
similar.
•Se recomienda dejar más de 0,3 m (12 pulg.) alrededor.
•No coloque ningún otro equipo sobre la unidad.
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
Read before use
Preparation
Thank you for purchasing this DENON product.
This manual explains the Setup Wizard that you will need to perform directly after removing the product from its packaging, before you start using the product.
The Setup Wizard displays easy to follow guidance on your television screen that shows you how to connect and configure speakers, various other devices, and network functions for full enjoyment of this unit.
Contents
About this manual
Read before use ·····································································1
nnOperation buttons
•Before turning the power on
Check once again that all connections are correct and that there are
no problems with the connection cables.
nnSymbols
•Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When going on vacation or leaving home
for long periods of time, be sure to unplug the power cord from the
power outlet.
The operations described in this manual are based mainly on
remote control operation.
Preparing the Setup Wizard··············································2
v
This symbol indicates a reference page on which
related information is described.
SETUP WIZARD·······································································4
m
This mark indicates the page of the owner’s manual on
the CD-ROM provided.
Playback (Basic operation)················································7
NOTE
This symbol indicates points to remember operations
or function limitations.
nnIllustrations
Note that the illustrations in this manual is for explanation purposes
and may differ from the actual unit.
Accessories
Check that the following parts are supplied with the product.
qGetting Started......................................................................... 1
wCD-ROM (Owner’s manual)..................................................... 1
eWarranty (for North America model only)................................. 1
rService network list.................................................................. 1
tPower cord............................................................................... 1
yRemote control unit (RC-1156)................................................. 1
uR6/AA batteries........................................................................ 2
iSetup microphone (DM-A409).................................................. 1
oAM loop antenna...................................................................... 1
Q0FM indoor antenna................................................................... 1
t
y
o
nnAbout the CD-ROM
(Getting Started / Owner’s manual)
You need to have Adobe Reader® installed on your computer to
view the owner’s manuals on the CD-ROM.
Click the Adobe Reader® banner in the CD-ROM menu to install
the Adobe Reader® (for Windows).
•Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from this unit when it is in use.
•Moving the unit
Turn off the power and unplug the power cord from the power
outlet. Next, disconnect the connection cables to other system units
before moving the unit.
•About care
•Wipe the cabinet and control panel clean with a soft cloth.
•Follow the instructions when using a chemical cleaner.
•Benzene, paint thinner or other organic solvents as well as
insecticide may cause material changes and discoloration if brought
into contact with the unit, and should therefore not be used.
i
Q0
1
Playback
Important information···································································7
Selecting the input source····························································7
Adjusting the master volume·······················································8
Turning off the sound temporarily···············································8
This symbol indicates a supplementary information
and tips for operations.
•About condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
Setup Wizard
Accessories·····················································································1
About this manual·········································································1
Cautions on handling·····································································1
Cautions on handling
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Preparing the Setup Wizard
This section describes how to prepare the Setup Wizard before use.
nnDo not plug the power plug of the main unit into the wall socket until these preparations are complete.
nnSpeaker connections are performed using the Setup Wizard. Do not connect the speakers yet.
What you need for this step
Speaker
(sold separately)
FR
SL
SR
z
SBR
zzIf you wish to enjoy 7.1-channel,
prepare a surround back speaker.
Subwoofer (with built-in amplifier)
(sold separately)
Place and layout speakers
Before installing the speakers, connect the speaker cables to the speakers. For details on how to connect the speaker cables, see the
speaker instruction manual.
Connect the speaker cables to the main unit using the Setup Wizard.
z
SBL
C
FL
Speaker cable
(sold separately)
1
nn When 5.1-channel installed
•Prepare enough for the
number of speakers you
will use.
FL
nn When 7.1-channel (Surround back speaker) installed
FR
SW
Audio cable
(sold separately)
FL
FR
SW
C
C
z1
z3
SL
TV
(sold separately)
HDMI cable
(sold separately)
z1
z2
z2
SL
SR
SR
Listening
position
Listening position
SBL
z1 22˚ – 30˚
z1 22˚ – 30˚
Remote control unit /
R6/AA batteries (supplied)
Setup microphone
(supplied)
Power cord (supplied)
FL
FR
C
SW
SL
SR
SBL
SBR
Front speaker (L)
Front speaker (R)
Center speaker
Subwoofer
Surround speaker (L)
Surround speaker (R)
Surround back speaker (L)
Surround back speaker (R)
z2 90˚ – 110˚
z3 135˚ – 150˚
•Install the surround speakers in a position 2 to 3 ft (60 to 90 cm) higher than
ear level.
Front
speaker
Surround
speaker
2 – 3 ft /
60 – 90 cm
GViewed from the sideH
2
SBR
z2120˚
Surround back speaker
(When 7.1-channel installed)
•Point slightly downwards
SVENSKA
onnect this unit to the television using an HDMI cable
C
(sold separately)
ESPAÑOL
3
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
Preparation
2
NEDERLANDS
Turn the television power on, and switch the video input to
this unit (HDMI input)
For details on how to operate the television, see the television instruction manual.
NOTE
If this unit is connected using cables other than the HDMI cable, the Setup Wizard
will not be displayed.
Setup Wizard
HDMI IN
(ARC)
q Power on
w Switch the input to this unit (HDMI input)
Insert the provided batteries into the remote control unit
Playback
4
q Slide the rear lid in the direction of the arrow and remove it.
w Load the two batteries properly as indicated by the marks in the battery compartment.
R6/AA
e Put the rear cover back on.
vStart Setup Wizard on next page
3
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
SETUP WIZARD
When preparations are complete, start the Setup Wizard.
Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the
instructions on the screen. You can skip or cancel at each section if necessary.
1
Language Select
Set the language for the instructions on
the television screen.
4
LANGUAGE SELECT
Please select the language for the on screen menu.
English
Español
Select
Enter
RETURN
Back to TOP
Set the connecting terminals for each
device to be set, and connect to the
terminals.
2
If your language is not available, select “English”.
Speaker Connection
Connect the speakers for surround sound.
NOTE
Connections for speakers other than 5.1 channel or 7.1
channel speakers cannot be set using the Setup Wizard.
5
SPEAKER CONNECTION
Please select the speaker
configuration to be used.
7.1ch
Others
5.1ch is the most popular
surround system.
Select
Enter
RETURN
Speaker Calibration
Configure the settings for your speakers,
and for the optimum surround sound for
your room.
SPEAKER CALIBRATION
For preparation, the setup
microphone which included
in the box is required.
Please connect the
microphone connector to the
SETUP MIC jack on front
panel.
6
Network Setup
Configure to playback audio files saved
onto a computer or Internet radio.
1
2
3
BD
Device
Blu-ray Disc player
Player
Video
Select
Blu-ray
CABLE
CABLE/PVR
CD
CD Recorder
DVD
DVD Recorder
HD DVD
Select
IPTV STB
PVR
SAT
SAT/PVR
TV
TV/DVD
TV/VCR
VCR
Enter
RETURN
Return
NETWORK SETUP
Please connect LAN cable to
ETHERNET port on rear panel
of receiver, and other side of
cable to network router.
When connection is complete,
press “Next” to continue.
Next
RETURN
Back to TOP
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 108 “Network Setup”).
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 19 “Set up speakers (Audyssey® Auto Setup)”).
4
Back to TOP
REMOTE SETUP
Enter
Back to TOP
RETURN
Please select the device you want to control.
4
RETURN
Enter
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 114 “Remote Setup Guide”).
Back to TOP
Select “Others”, and then select “Skip” in “2. Speaker Connection” to proceed to “3. Speaker
Calibration”. (For details on the setting method, see m page 57 “Speaker installation/connection
(Advanced connection)”.)
3
Remote Setup
Configure the settings so that devices
connected to this unit can be operated
using the provided remote control.
5.1ch
Source
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 88 “Input Assign”).
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 116 “Language”).
NOTE
Source Setup
SOURCE SETUP
Please select device.
This completes the Setup Wizard.
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANÇAIS
Please select the speaker
configuration to be used.
Insert the main unit power plug into the wall
socket.
3
Press AMP to set the remote control unit to AMPoperation mode.
Switch the AMP-operation mode
5.1ch
7.1ch
Others
5.1ch is the most popular
surround system.
Select
Enter
RETURN
Back to TOP
•This remote control is a preset remote control that can be used to
control connected devices.
5.1ch
7.1ch
Others
5.1ch is selected for speaker system.
Select “Yes” to confirm.
Yes
To household power outlet
(AC 120 V, 60 Hz)
No
5.1ch is the most popular
surround system.
Select
Enter
RETURN
Back to TOP
The power switches on, and the Setup Wizard start screen is
displayed on the television screen.
Press ZONE SELECT to switch the zone mode to J
(MAIN ZONE).
SPEAKER CONNECTION
Please connect the
speakers.
Press ON ( Z ) to the this unit.
Power on
Playback
2
Power cord
(supplied)
4
Switch the zone mode
Ready to connect
Location :FRONT LEFT
Terminal :Front L
Select
Next
RETURN
Back to TOP
SETUP WIZARD
You will now verify speaker
wish to stop and exit wizard?
connections Do
andyou
calibrate
Section
the system, which will
You canplayback
restart the setup wizard
provide the highest
Section
anytime using the on screen menu.
quality.
Select "Next" to start.
Returns to the start of
each setting.
or
Cancels the Setup
Wizard.
J
Lights
Press [ENTER] for next
connection.
Next
Skip "Section1" Yes
Select
Press STANDBY (X).
No
Enter
RETURN
Exit
SETUP WIZARD
During power standby, a minimal amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
2.Speaker Connection
3.Speaker Calibration
4.Source Setup
5.Remote Setup
6.Network Setup
Start
Completed
Enter
5
GPower indicator status in standby modeH
•Normal standby : Off
•When “HDMI Control”(vm page 106) is
set to “ON” : Red
NOTE
1.Language Select
This wizard assists
connection and setup
of receiver step by step
using cursor, enter or
return keys on remote.
Press [ENTER] to start.
•This remote control can be operated in three separate zones, MAIN
ZONE and ZONE2.
•Set the remote control to MAIN ZONE to operate the Setup
Wizard.
When power is switched to standby
Setup Wizard
SPEAKER CONNECTION
Please select the speaker
configuration to be used.
Enters the selection.
Preparation
1
SPEAKER CONNECTION
Move to the item that
you want to configure
using o p.
ENGLISH
Getting Started
Basic operation of Setup Wizard
Move to the item that
you want to configure
using ui.
DEUTSCH
RETURN
Exit
Press ENTER.
Start the Setup Wizard.
Setup Wizard has started.
Please follow the message on screen
To start the Setup Wizard again after exiting it, select “SETUP
WIZARD” in the menu (vm page 82 “Menu map”).
5
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
nnConnecting the speakers
The speakers are connected in “2. Speaker Connection” of the Setup Wizard but if you did not use or cancelled the Setup Wizard, connect the speakers as shown below.
For details, see the included CD-ROM (Owner’s manual).
Connect
5.1-channel
7.1-channel
Carefully check the left (L) and right (R) channels and
+ (red) and – (black) polarities on the speakers being
connected to the this unit, and be sure to interconnect
the channels and polarities correctly.
Connecting the speaker cables
Peel off about 0.03 ft/10 mm of sheathing from the tip of the
speaker cable, then either twist the core wire tightly or terminate it.
NOTE
•Connect so that the speaker cable core wires do not protrude
from the speaker terminal. The protection circuit may be
activated if the core wires touch the rear panel or if the + and –
sides touch each other (vm page 138 “Protection Circuit”).
•Never touch the speaker terminals while the power supply is
connected. Doing so could result in electric shock. (When the
Setup Wizard is running, follow the instructions in the Setup
Wizard screen for making connections.)
•Use speakers with the speaker impedances shown below.
Speaker terminals
FRONT
CENTER
SURROUND
SURR. BACK / AMP ASSIGN
FL
FL
FR
SW
C
C
Speaker impedance
6 – 16 Ω
SL
SL
SR
SR
SBL
6
FR
SW
SBR
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
Playback (Basic operation)
Preparation
Here, we explain how to perform simple operations.
For details, see the included CD-ROM (Owner’s manual).
Selecting the input source
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
nnUsing the “SOURCE SELECT” menu
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Selecting the input source
SOURCE SELECT
Press the input source select button
(BD, SAT/CBL, TV, NET/USB, DVD,
V.AUX, DOCK, TUNER, GAME1,
GAME2, DVR or CD) to be played
back.
q
Sourse
w
Recent
Tuner
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to five) are displayed.
e Icons for the input sources in the different categories are
displayed.
Turn SOURCE SELECT.
•Turning SOURCE SELECT switches the input source, as shown
below.
NET/USB
DOCK
V.AUX
DVD
GAME2
TV
Video
Network
nnUsing the knob on the main unit
BD
Playback
e
You can also use the following operation to select an input
source.
CD
BD
Player
The desired input source can be selected
directly.
TUNER
The currently selected input
source is highlighted.
•When using with an iPod connected directly to the USB port of this
unit, select “
(USB/iPod)” for the input source.
•Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vm page 113).
•To turn off the source selection menu without selecting an input
source, press SOURCE SELECT again.
•When SOURCE SELECT is pressed, the AMP-operation mode starts
automatically (vm page 118).
Setup Wizard
Switch the remote control unit to the J (MAIN ZONE) mode
when performing this operation (vm page 118 “Operating AV
device”).
If the remote control unit is in K (ZONE2) mode, the “SOURCE
SELECT” menu will not be displayed when SOURCE SELECT is
pressed.
SAT/CBL
GAME1
DVR
•When iPod 1 on the main unit is pressed, the input source
of this unit is switched to “DOCK” or “NET/USB” and the
connected iPod is automatically played (vm page 32 “iPod
play function”).
qPress SOURCE SELECT.
Display the “SOURCE SELECT” menu.
The input source is set and the source
selection menu is turned off.
wUse uio p to select the input source,
then press ENTER.
7
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
Adjusting the master volume
Use M df to adjust the volume.
nn When the “Volume Display” setting
(vm page 113) is “Relative”
GAdjustable rangeH
–––
–80.5dB – 18.0dB
nn When the “Volume Display” setting (vm page 113)
is “Absolute”
GAdjustable rangeH 0.0 – 99.0
•The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit. In this case, perform the
following operations.
Turn MASTER VOLUME to adjust the volume.
Turning off the sound temporarily
Press N.
ESPAÑOL
NEDERLANDS
SVENSKA
Other operations
See the following items on the included CD-ROM
(Owner’s manual).
nnPlaying a Blu-ray Disc player/DVD player
nnPlaying a CD player
nnPlaying an iPod®
nnTuning in radio stations
nnPlaying a network audio
nnPlaying a USB memory device
nnSelecting a listening mode (SURROUND MODE)
nnConvenient functions
nnPlayback in ZONE2 (Separate room)
nnHow to make detailed settings
nnOperating the connected devices by remote
control unit
•The power indicator flashes green.
•“MUTE” indicator on the display lights.
appears on a TV screen.
•
•The sound is reduced to the level set at “Mute Level” (vm
page 113).
•To cancel, press N again. Muting can also be canceled by adjusting
the master volume.
This completes the basic settings and
operations.
For details on how to change settings
or detailed explanations of operations,
see the included CD-ROM (Owner’s
manual).
8
V00
www.denon.com
D&M Holdings Inc.
Printed in China 5421 10062 003D