Denon DCD-F102 CD Player User Manual

CD PLAYER
DCD-F102
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
ISTRUZIONI PER L’USO
INSTRUCCIONES DE FUNCIONAMIENTO
GEBRUIKSAANWIJZING
BRUKSANVISNING
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPAÑOL
2 SAFETY PRECAUTIONS
NEDERLANDS
SVENSKA
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
• DECLARATION OF CONFORMITY
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
,,
CLASS 1
,,
LASER PRODUCT
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock t persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.
VARNING:
OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM
ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
We declare under our sole responsibility that this product, to which this
declaration relates, is in conformity with the following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3.
Following the provisions of 73/23/EEC, 2004/108/EC and 93/68/EEC
Directive.
• ÜBEREINSTIMMUNGSERKLÄRUNG
Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das
sich diese Erklärung bezieht, den folgenden Standards entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC, 2004/108/EC und
93/68/EEC.
• DECLARATION DE CONFORMITE
Nous déclarons sous notre seule responsabilité que l’appareil, auquel se
réfère cette déclaration, est conforme aux standards suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3.
D’après les dispositions de la Directive 73/23/EEC, 2004/108/EC et
93/68/EEC.
• DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo prodotto, al quale la
nostra dichiarazione si riferisce, è conforme alle seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3-3.
In conformità con le condizioni delle direttive 73/23/EEC, 2004/108/EC e
93/68/EEC.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
• DECLARACIÓN DE CONFORMIDAD
ATTENZIONE: QUESTO APPARECCHIO E’ DOTATO DI DISPOSITIVO
OTTICO CON RAGGIO LASER.
L’USO IMPROPRIO DELL’APPARECCHIO PUO’ CAUSARE PERICOLOSE
ESPOSIZIONI A RADIAZIONI!
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE SUPER AUDIO CD PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
I
Declaramos bajo nuestra exclusiva responsabilidad que este producto al
que hace referencia esta declaración, está conforme con los siguientes
estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y EN61000-3-3.
Siguiendo las provisiones de las Directivas 73/23/EEC, 2004/108/EC y
93/68/EEC.
• EENVORMIGHEIDSVERKLARING
Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt,
waarop deze verklaring betrekking heeft, in overeenstemming is met de
volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 73/23/EEC, 2004/108/EC en
93/68/EEC.
• ÖVERENSSTÄMMELSESINTYG
Härmed intygas helt på eget ansvar att denna produkt, vilken detta intyg
avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och EN61000-3-3.
Enligt stadgarna i direktiv 73/23/EEC, 2004/108/EC och 93/68/EEC.
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
2 NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO /
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
CAUTION:
• The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, tablecloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• Do not expose the set to dripping or splashing fluids.
• No objects filled with liquids, such as vases, shall be placed on the apparatus.
ACHTUNG:
•
•
• Avoid high temperatures.
Allow for sufficient heat dispersion when installed in a rack.
• Vermeiden Sie hohe Temperaturen.
Beachten Sie, daß eine ausreichend Luftzirkulation
gewährleistet wird, wenn das Gerät auf ein Regal gestellt
wird.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur suffisante lors de
l’installation sur une étagère.
• Evitate di esporre l’unità a temperature alte.
Assicuratevi che ci sia un’adeguata dispersione del calore
quando installate l’unità in un mobile per componenti audio.
• Evite altas temperaturas
Permite la suficiente dispersión del calor cuando está
instalado en la consola.
• Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het apparaat op
een rek wordt geplaatst.
• Undvik höga temperaturer.
Se till att det finns möjlighet till god värmeavledning vid
montering i ett rack.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie den Stecker
herausziehen.
• Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
• Manneggiate il filo di alimentazione con cura.
Agite per la spina quando scollegate il cavo dalla presa.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón de
energía.
• Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer deze moet
worden aan- of losgekoppeld.
• Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
•
•
•
•
•
•
Keep the apparatus free from moisture, water, and dust.
•
Halten Sie das Gerät von Feuchtigkeit, Wasser und Staub •
fern.
•
Protéger l’appareil contre l’humidité, l’eau et lapoussière.
Tenete l’unità lontana dall’umidità, dall’acqua e dalla •
polvere.
•
Mantenga el equipo libre de humedad, agua y polvo.
•
Laat geen vochtigheid, water of stof in het apparaat
binnendringen.
Utsätt inte apparaten för fukt, vatten och damm.
Do not let foreign objects into the apparatus.
Keine fremden Gegenstände in das Gerät kommen lassen.
Ne pas laisser des objets étrangers dans l’appareil.
E’ importante che nessun oggetto è inserito all’interno
dell’unità.
No deje objetos extraños dentro del equipo.
Laat geen vreemde voorwerpen in dit apparaat vallen.
Se till att främmande föremål inte tränger in i apparaten.
• Die Belüftung sollte auf keinen Fall durch das Abdecken der Belüftungsöffnungen durch
Gegenstände wie beispielsweise Zeitungen, Tischtücher, Vorhänge o. Ä. behindert
werden.
• Auf dem Gerät sollten keinerlei direkten Feuerquellen wie beispielsweise angezündete
Kerzen aufgestellt werden.
• Bitte beachten Sie bei der Entsorgung der Batterien die geltenden
Umweltbestimmungen.
• Das Gerät sollte keinerlei Flüssigkeit, also keinem Tropfen oder Spritzen ausgesetzt
werden.
• Auf dem Gerät sollten keinerlei mit Flüssigkeit gefüllten Behälter wie beispielsweise
Vasen aufgestellt werden.
ATTENTION:
• La ventilation ne doit pas être gênée en recouvrant les ouvertures de la ventilation avec
des objets tels que journaux, rideaux, tissus, etc.
• Aucune flamme nue, par exemple une bougie, ne doit être placée sur l’appareil.
• Veillez à respecter l’environnement lorsque vous jetez les piles usagées.
• L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
• Aucun objet contenant du liquide, par exemple un vase, ne doit être placé sur l’appareil.
• Unplug the power cord when not using the apparatus for
long periods of time.
• Wenn das Gerät eine längere Zeit nicht verwendet werden soll,
trennen Sie das Netzkabel vom Netzstecker.
• Débrancher le cordon d’alimentation lorsque l’appareil n’est
pas utilisé pendant de longues périodes.
• Disinnestate il filo di alimentazione quando avete
l’intenzione di non usare il filo di alimentazione per un lungo
periodo di tempo.
• Desconecte el cordón de energía cuando no utilice el
equipo por mucho tiempo.
• Neem altijd het netsnoer uit het stopkontakt wanneer het
apparaat gedurende een lange periode niet wordt gebruikt.
• Koppla ur nätkabeln om apparaten inte kommer att
användas i lång tid.
• Do not let insecticides, benzene, and thinner come in
contact with the apparatus.
• Lassen Sie das Gerät nicht mit Insektiziden, Benzin oder
Verdünnungsmitteln in Berührung kommen.
• Ne pas mettre en contact des insecticides, du benzène et
un diluant avec l’appareil.
• Assicuratevvi che l’unità non venga in contatto con
insetticidi, benzolo o solventi.
• No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
• Laat geen insektenverdelgende middelen, benzine of
verfverdunner met dit apparaat in kontakt komen.
• Se till att inte insektsmedel på spraybruk, bensen och
thinner kommer i kontakt med apparatens hölje.
PRECAUZIONI:
• Le aperture di ventilazione non devono essere ostruite coprendole con oggetti, quali
giornali, tovaglie, tende e così via.
• Non posizionare sull'apparecchiatura fiamme libere, come ad esempio le candele accese.
• Prestare attenzione agli aspetti legati alla tutela dell’ambiente quando si smaltisce la
batteria.
• L’apparecchiatura non deve essere esposta a gocciolii o spruzzi.
• Non posizionare sull’apparecchiatura nessun oggetto contenete liquidi, come ad esempio
i vasi.
PRECAUCIÓN:
• La ventilación no debe quedar obstruida por hacerse cubierto las aperturas con objetos
como periódicos, manteles, cortinas, etc.
• No debe colocarse sobre el aparato ninguna fuente inflamable sin protección, como velas
encendidas.
• A la hora de deshacerse de las pilas, respete la normativa para el cuidado del medio
ambiente.
• No se expondrá el aparato al goteo o salpicaduras cuando se utilice.
• No se colocarán sobre el aparato objetos llenos de líquido, como jarros.
WAARSCHUWING:
* (For apparatuses with ventilation holes)
•
•
•
•
•
•
•
Do not obstruct the ventilation holes.
Die Belüftungsöffnungen dürfen nicht verdeckt werden.
Ne pas obstruer les trous d’aération.
Non coprite i fori di ventilazione.
No obstruya los orificios de ventilación.
De ventilatieopeningen mogen niet worden beblokkeerd.
Täpp inte till ventilationsöppningarna.
• Never disassemble or modify the apparatus in any way.
• Versuchen Sie niemals das Gerät auseinander zu nehmen
oder auf jegliche Art zu verändern.
• Ne jamais démonter ou modifier l’appareil d’une manière
ou d’une autre.
• Non smontate mai, nè modificate l’unità in nessun modo.
• Nunca desarme o modifique el equipo de ninguna manera.
• Nooit dit apparaat demonteren of op andere wijze
modifiëren.
• Ta inte isär apparaten och försök inte bygga om den.
II
• De ventilatie mag niet worden belemmerd door de ventilatieopeningen af te dekken met
bijvoorbeeld kranten, een tafelkleed, gordijnen, enz.
• Plaats geen open vlammen, bijvoorbeeld een brandende kaars, op het apparaat.
• Houd u steeds aan de milieuvoorschriften wanneer u gebruikte batterijen wegdoet.
• Stel het apparaat niet bloot aan druppels of spatten.
• Plaats geen voorwerpen gevuld met water, bijvoorbeeld een vaas, op het apparaat.
OBSERVERA:
• Ventilationen bör inte förhindras genom att täcka för ventilationsöppningarna med föremål
såsom tidningar, bordsdukar, gardiner osv.
• Inga blottade brandkällor, såsom tända ljus, bör placeras på apparaten.
• Tänk på miljöaspekterna när du bortskaffar batteri.
• Apparaten får inte utsättas för vätska.
• Inga objekt med vätskor, såsom vaser, får placeras på apparaten.
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
A NOTE ABOUT RECYCLING:
CAUTION:
This product’s packaging materials are recyclable and can be reused. Please dispose of any
materials in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with the local
regulations concerning chemical waste.
This product and the accessories packed together constitute the applicable product according to the
WEEE directive except batteries.
To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the
user.
VORSICHT:
Um dieses Gerät vollständig von der Stromversorgung abzutrennen, trennen Sie bitte den Netzstecker von der
Wandsteckdose ab.
Die Hauptstecker werden verwendet, um die Stromversorgung zum Gerät völlig zu unterbrechen; er muss für den
Benutzer gut und einfach zu erreichen sein.
HINWEIS ZUM RECYCLING:
Das Verpackungsmaterial dieses Produktes ist für zum Recyceln geeignet und kann wieder verwendet werden. Bitte
entsorgen Sie alle Materialien entsprechend der örtlichen Recycling-Vorschriften.
Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte geben Sie die Batterien gemäß
örtlichen Bestimmungen an den Sammelstellen oder Sondermüllplätzen ab.
Dieses Produkt zusammen mit den Zubehörteilen ist das geltende Produkt der WEEE-Direktive, davon
ausgenommen sind die Batterien.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur, débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement l’alimentation de l’appareil et l’utilisateur doit pouvoir y
accéder facilement.
UNE REMARQUE CONCERNANT LE RECYCLAGE:
ATTENZIONE:
Les matériaux d’emballage de ce produit sont recyclables et peuvent être réutilisés. Veuillez disposer de tout
matériau conformément aux réglements de recylage locaux.
Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations locales.
Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut conformément aux réglements locaux
concernant les déchets chimiques.
Ce produit et les accessoires emballés ensemble sont des produits conformes à la directive DEEE sauf pour les piles.
Per scollegare definitivamente questo prodotto dalla rete di alimentazione elettrica, togliere la spina dalla relativa
presa.
La spina di rete viene utilizzata per interrompere completamente l’alimentazione all’unità e deve essere facilmente
accessibile all’utente.
NOTA RELATIVA AL RICICLAGGIO:
Para desconectar completamente este producto de la alimentación eléctrica, desconecte el enchufe del enchufe de
la pared.
El enchufe de la alimentación se utiliza para interrumpir por completo el suministro de alimentación a la unidad y debe
de encontrarse en un lugar al que el usuario tenga fácil acceso.
PRECAUCIÓN:
I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente alle
normative locali sul riciclaggio.
Per smaltire l’unità, osservare la normativa in vigore nel luogo di utilizzo.
Non gettare le batterie, né incenerirle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
Questo prodotto e gli accessori inclusi nell’imballaggio sono applicabili alla direttiva RAEE, ad eccezione delle batterie.
VOORZICHTIGHEID:
Om de voeding van dit product volledig te onderbreken moet de stekker uit het stopcontact worden getrokken.
De netstekker wordt gebruikt om de stroomtoevoer naar het toestel volledig te onderbreken en moet voor de
gebruiker gemakkelijk bereikbaar zijn.
ACERCA DEL RECICLAJE:
Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Disponga de estos
materiales siguiendo los reglamentos de reciclaje de su localidad.
Cuando se deshaga de la unidad, cumpla con las reglas o reglamentos locales.
Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo los reglamentos de su localidad
relacionados con los desperdicios químicos.
Este producto junto con los accesorios empaquetados es el producto aplicable a la directiva RAEE excepto pilas.
FÖRSIKTIHETSMÅTT:
Koppla loss stickproppen från eluttaget för att helt skilja produkten från nätet.
Stickproppen används för att helt bryta strömförsörjningen till apparaten, och den måste vara lättillgänglig för
användaren.
EEN AANTEKENING WAT BETREFT HET RECYCLEREN:
Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt worden. Er wordt verzocht om zich van
elk afvalmateriaal te ontdoen volgens de plaatselijke voorschriften.
Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van wit- en bruingoed op.
Batterijen mogen nooit worden weggegooid of verbrand, maar moeten volgens de plaatselijke voorschriften
betreffende chemisch afval worden verwijderd.
Op dit product en de meegeleverde accessoires, m.u.v. de batterijen is de richtlijn voor afgedankte elektrische en
elektronische apparaten (WEEE) van toepassing.
EN KOMMENTAR OM ÅTERVINNING:
Produktens emballage är återvinningsbart och kan återanvändas. Kassera det enligt lokala återvinningsbestämmelser.
När du kasserar enheten ska du göra det i överensstämmelse med lokala regler och bestämmelser.
Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt lokala bestämmelser för kemiskt avfall.
Denna apparat och de tillbehör som levereras med den är de som uppfyller gällande WEEE-direktiv, med undantag
av batterierna.
III
ENGLISH
Getting Started
System Operations
Getting Started
Thank you for purchasing this DENON CD Player. Please read the operation instructions thoroughly in order to acquaint yourself with the CD
player and achieve maximum satisfaction from it.
Be sure to keep these instructions for future reference, should any questions or problems arise.
System remote control unit ························································13
Auto power on function ······························································14
Auto function selection································································14
CD synchronized recording··························································14
Timer function ···············································································14
Edit function··················································································15
Contents
Others
Getting Started
Accessories······················································································2
Before using ····················································································2
About discs
Discs usable on this set ·································································2
Holding discs··················································································2
Loading discs ·················································································2
Cautions on loading discs ······························································3
Cautions on handling······································································3
Cautions on storing discs ·······························································3
Cleaning discs ················································································3
Part names and functions
Front panel ·····················································································4
Display····························································································4
Rear panel ······················································································5
Recommended system layout·······················································5
Connections
Cable indications ············································································5
Connections [System connections] ··············································6
Operation
Turning the power on·····································································7
Loading discs ··················································································7
Starting playback············································································7
To stop playback·············································································7
To pause playback ··········································································7
Fast-forwarding (Search) ································································8
Fast-reversing (Search)···································································8
Moving to the beginning of tracks (Skip) ·······································8
Playing the desired track (Direct play) ·········································8
Listening to specific tracks in a specific order
(Programmed play)·····································································8, 9
Listening in random order (Random playback)···························9
Listening to tracks repeatedly (Repeat play)
Listening to a specific track repeatedly (1-track repeat play)·········9
Listening to all the tracks repeatedly (All-track repeat play) ··········9
Cuing and stopping playback (Pause)
Cuing with direct searching ···························································9
Cuing with programmed searching················································9
Playing MP3 or WMA (Windows Media® Audio) files
Before playing MP3 or WMA files ···············································10
Playing MP3 or WMA files···························································11
Listening to MP3 or WMA files in random order
(Random folder/disc play)·····························································11
Listening to MP3 or WMA files repeatedly
(Repeat folder/disc play)·······························································12
1
ENGLISH
Troubleshooting············································································16
Specifications ················································································16
ENGLISH
Getting Started
Getting Started
Accessories
Check that the following parts are attached in addition to the main
unit:
q Operating instructions .............................................................1
w Service station list....................................................................1
e Pin-plug cable (Cable length: Approx. 0.6 m)...........................1
r System cable (Cable length: Approx. 0.5 m) ...........................1
e
r
NOTE:
• This CD player uses a semiconductor laser. To ensure stable
operation, it is recommended to use the set indoors at a
temperature of 5°C (41°F) ~ 35°C (95°F).
Loading discs
• Set the disc with the labeled side facing up.
• Make sure the disc tray is fully open when inserting the disc.
• Place the discs flatly, 12 cm discs in the outer tray guide (Figure 1),
8 cm discs in the inner tray guide (Figure 2).
Figure 1
About discs
Figure 2
Outer tray guide
Discs usable on this set
12 cm discs
q Music CDs
Inner tray guide
8 cm discs
Discs with the mark at the right can be used on
this set.
Note however that discs with special shapes
(heart-shaped discs, octagonal discs, etc.) cannot
be played. Do not attempt to play them, as doing
so could damage the set.
Before using
• Place 8 cm discs in the inner tray guide without using an adapter.
Pay attention to the following before using this unit:
• Moving the unit.
To prevent short-circuits or damaged wires in the connection cables,
always unplug the power supply cord and disconnect the connection
cables between all other audio components when moving the unit.
• Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
• Condensation (dew).
Water droplets may condense on internal operation parts if the set
is brought into a heated room from the cold outdoors or when the
room is heated rapidly. If this happens, the set may not operate
properly.
• Should condensation occur.
The condensation will evaporate in one hour or less, at which time
the system will function normally.
• Before turning the power operation switch on.
Check once again that all connections are correct and that there are
not problems with the connection cables. Always set the power
operation switch to the standby position before connecting and
disconnecting connection cables.
w CD-R/CD-RW
• Some discs and some recording formats may not be playable.
• Non-finalized discs cannot be played.
Finalization:
Finalization is the process that makes recorded CD-R/CD-RW discs
playable on compatible players.
Holding discs
Do not touch the signal surface.
• Store these instructions in a safe place.
After reading, store this instructions along with the warranty card in
a safe place.
• Power is supplied to some of the circuitry even when the power
is set to the standby mode using the power operation switch.
When traveling or leaving home for long periods of time, be
sure to unplug the power supply cord from the power outlet.
• Note that the illustrations in these instructions may differ from
the actual unit for explanation purposes.
2
ENGLISH
• In the following cases, “00 m 00 s” is shown on the display:
• When no disc is loaded
• When the disc is loaded upside-down
• When the disc’s information could not be read properly
ENGLISH
Getting Started
Cautions on loading discs
• Only load one disc at a time. Loading two or more discs can damage
the set or scratch the discs.
• Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
• Do not use discs on which the sticky part of cellophane tape or
labels is exposed or on which there are traces of where labels have
been removed. Such discs could get caught inside the player and
damage it.
Getting Started
Cleaning discs
• If there are fingerprints or dirt on discs, wipe them off before using
the disc. If not the sound quality could be reduced and the sound
may be broken.
• Use a commercially available disc cleaning set or a soft cloth to clean
discs.
Cautions on handling
• Do not get fingerprints, oil or dirt on discs.
• Take special care not to scratch discs when removing them from
their cases.
• Do not bend or heat discs.
• Do not enlarge the hole at the center.
• Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs.
• Water droplets may form on discs if they are moved suddenly from
a cold place (outdoors for example) to a warm place, but do not try
to dry them off using a hairdryer, etc.
Do not wipe with a circular motion.
Gently wipe the disc from the
inside towards the outside.
NOTE:
• Do not use record spray, antistatic agents, or benzene, thinner or
other solvents.
Cautions on storing discs
• Be sure to remove discs after using them.
• Be sure to store discs in their cases to protect them from dust,
scratches, warping, etc.
• Do not store discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heating appliances, etc.
3
ENGLISH
ENGLISH
Getting Started
Getting Started
Part names and functions
Display
For buttons not explained here, see the page indicated in parentheses ( ).
qwe
Front panel
i
u
r
Various information is displayed
depending on the operation mode.
For a music CD:
• Total number of tracks
• Total playing time
• Track number
• Elapsed time, etc.
w
q Power operation switch
(ON/STANDBY) ···········································(7)
w Power indicator···········································(7)
e Display··························································(4)
r Skip buttons (8, 9) ·················(8, 9, 11)
e
y
y t
q Information display
q
t
For MP3/WMA files:
• Total number of folders
• Number of tracks
• Folder number
• Elapsed time
• Track name
• Artist name
• Album name, etc.
r
t Stop button (2) ···········································(7)
y Play/Pause button (1/3) ········(7 ~ 9, 11, 14)
u Disc tray open/close button (5)················(7)
i Disc tray ·······················································(7)
w Lights when a disc is playing.
e Lights when the pause mode is set.
Search buttons (6, 7)·························(8)
4
ENGLISH
here,
r Lights when the total number of tracks and total
time are displayed at q.
Lights
when in the random play mode.
t
y Lights when in the repeat play mode.
The display switches as follows each time the
REPEAT button is pressed.
• In modes other than the folder mode:
1
ALL
(1-track repeat)
(All-track repeat)
Not displayed
• In the folder mode:
1 FLD
(1-track repeat)
FLD
(All-track repeat
between folders)
FLD
ENGLISH
Getting Started
Rear panel
Connections
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power supply cords together with speaker cables. Doing so could result in humming
or noise.
• Making connections with the power turned on could result in noise or damage the speakers.
• Bunching the power supply cords and connection cables together could result in humming or noise.
• Connect all the connection cables between the different components firmly. The system may not
operate properly if the connections are incomplete.
• Be sure to disconnect the power supply cords when changing the connections. Changing the
connections while the system is operating could result in malfunction.
q
w
q LINE OUT terminals ····································(6)
w DIGITAL OUT (OPTICAL) terminals ···········(6)
e SYSTEM CONNECTOR jacks······················(6)
e
r
t
r AC outlet······················································(6)
t Power supply cord ······································(6)
Cable indications
Connect using the connection cables shown below.
Audio cable
A
Recommended system layout
To ensure performance and safety, it is recommended to arrange the components as shown below when
connecting to models in the F102 series.
Signal direction
Audio signal
Analog connections (Stereo)
(White)
L
L
(Red)
R
R
IN
OUT
Pin-plug cable
B
DRA-F102
System connections
System cable
DCD-F102
DRR-F102
NOTE:
• Arrange in such a way that the receiver’s ventilation holes are not obstructed so that the heat can
dissipate.
• Do not place other components directly on top of the receiver.
• To ensure safety, do not make stacks of more than three components.
5
ENGLISH
OUT
IN
ENGLISH
Connections
Connections
Connections [System connections]
System operations can be performed when the components of the
F102 series are connected with system cables (
page 13).
• All of the system operations are controlled from the receiver (DRAF102/F102DAB).
• It is also possible to connect devices other than F102 series
components. In this case, however, system operations cannot be
performed.
Receiver
[DRA-F102/
F102DAB]
(Sold separately)
Wall power outlet
AC 230 V, 50 Hz
¢ When connecting the optical digital output
connector with an optical transmission cable
(commercially available)
A
A
B
A
Match the
shapes
Match the shapes then insert firmly all the way in.
Cassette deck
[DRR-F102]
(Sold separately)
CD player
[DCD-F102]
(This unit)
B
NOTE:
• Do not unplug the power supply cord while the system is operating.
• The maximum total power consumption of devices connected to the DCD-F102’s AC outlets is 60 W. Do not connect devices with power
consumptions greater than 60 W.
6
ENGLISH
ENGLISH
Operation
Operation
1/3
<5>
2
Turning the power on
Starting playback
Press <ON/STANDBY>.
Press 1/3.
• When the power turns on, the power indicator lights green.
• The “1” indicator lights and playback starts.
¢ Turning the power off (to the standby mode):
Press <ON/STANDBY> again or [POWER OFF].
The power indicator turns off.
<ON/STANDBY>
Once all the tracks recorded on the disc have been played, the
stop mode is set automatically.
[TIME/DISPLAY] can be used to switch the information displayed.
Elapsed time of
currently playing
track
NOTE:
• To turn off the power while a disc is playing, be sure to press 2
to stop playback before turning off the power.
• When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
Remaining time of all remaining tracks
To stop playback
Press 2 during playback.
Loading discs
[POWER OFF]
(
page 2)
Press <5> to open the disc tray.
To pause playback
Press 1/3 during playback.
¢ To close the disc tray:
• The “3” indicator lights and the pause mode is set.
Press <5> again.
1/ 3
2
[TIME/DISPLAY]
Remaining time of
currently playing
track
NOTE:
• Be sure to turn on the power when opening and closing the disc
tray.
• Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
• Do not insert foreign objects into the disc tray. Doing so will
damage it.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
7
ENGLISH
¢ To resume playback:
Press 1/3.
ENGLISH
Operation
Operation
1/3
Fast-forwarding (Search)
Press and hold <7/9> or [9] during playback.
Normal playback resumes when you release your finger from the
button.
¢ To search forward at high speed:
In the pause mode, Press and hold <7/9> or [9].
<8/6>
<7/9>
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
[NUMBER]
(1~10, +10)
Normal playback resumes when you release your finger from the
button.
In the pause mode, Press and hold <8/6> or [8].
1/ 3
• The sound may be interrupted shortly when resuming normal
playback after searching.
[8]
Example: Track 4 : [4]
Example: Track 12 : [+10] [2]
Example: Track 20 : [+10] [10]
Up to 25 tracks can be programmed.
¢ To search backward at high speed:
[CLEAR/DEL]
For track numbers 1 to 10, press the corresponding button ([1] to
[10]).
For track numbers 11 and on, first press [+10] then press buttons
[1] to [10].
Listening to specific tracks in a specific order
(Programmed play)
Press and hold <8/6> or [8] during playback.
[REPEAT]
[CALL]
Use [NUMBER] (1 ~ 10, +10) to select the track.
• The sound may be interrupted shortly when resuming normal
playback after searching.
Fast-reversing (Search)
[PROG]
[RANDOM]
Playing the desired track (Direct play)
1 In the stop mode, press [PROG].
• “PGM” is displayed.
2 Use [NUMBER] (1 ~ 10, +10) to select the track.
Example: To program tracks 3, 12, 7 to play in that order:
[3] [+10] [2] [7]
3 Press 1/3.
• The tracks are played in the programmed order.
¢ Checking the programmed tracks:
[9]
In the stop mode, press [CALL].
Moving to the beginning of tracks (Skip)
Press [8] or [9] during playback.
The operation is as follows if the button is held in:
9: Skip to the beginning of tracks several tracks on
8: Skip to the beginning of tracks several tracks before
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
8
ENGLISH
Track number of first track in program
Track number of last track in
program
Track number of second
track in program
The total program time reappears if [CALL] is not operated for 5
seconds or more.
ENGLISH
Operation
¢ To change a programmed track:
In the stop mode, use [PROG] to turn off the programmed track
number display, then perform steps 1 and 2 over.
¢ Clearing tracks from the program:
In the stop mode, press [CLEAR/DEL].
The last track in the program is deleted each time the button is
pressed.
Operation
Listening to tracks repeatedly (Repeat play)
Listening to a specific track repeatedly
(1-track repeat play)
1
Cuing with direct searching
• The “
1” indicator lights.
1
ALL
(1-track repeat)
In the stop mode, use [PROG] to turn off the programmed track
number display.
NOTE:
• If the disc tray is opened after performing the program search
operation, the program is cleared.
(All-track repeat)
Display off
(Repeat off)
<8/6> or <7/9> ([8] or [9])
2 Use
to select the track you want to hear.
3
Press [RANDOM].
The “RANDOM” indicator turns off.
¢ To start playback:
• During programmed playback, use <8/6> or <7/9>
([8] or [9]) to select the track.
1” indicator turns off.
Listening to all the tracks repeatedly
(All-track repeat play)
1 In the stop mode, press [PROG].
• “PGM” is displayed.
Press [REPEAT] twice in a row in the stop or play
1 mode.
2 Use [NUMBER] (1 ~ 10, +10) to select the track.
Press 1/3 twice.
3
Press 1/3.
2
ALL” indicator lights.
• The currently playing disc is played repeatedly.
¢ Stopping all-track repeat playback:
• If [REPEAT] is pressed during random playback, the tracks are played
once in one random pattern, then played again in a different order.
Enjoy listening to them in a different order each time.
2 Use [NUMBER] (1 ~ 10, +10) to select the track.
Cuing with programmed searching
• The “
¢ Stopping random playback:
In the stop mode, press 1/3 twice in a row.
• The selected track is played repeatedly.
Listening in random order (Random playback)
2 Press 1/3.
• The “3” indicator lights.
Press 1/3.
Press [REPEAT] until the “
• The “RANDOM” indicator lights.
1 Press 1/3 once in the play mode.
Press 1/3.
¢ Stopping 1-track repeat playback:
1 In the stop mode, press [RANDOM].
Setting the pause mode after cuing to the beginning of the selected
track is convenient when recording onto cassette tapes.
Press [REPEAT] once in the stop or play mode.
¢ Stopping programmed playback:
• During programmed playback, press [REPEAT] to play the
programmed tracks repeatedly.
Cuing and stopping playback (Pause)
Press [REPEAT] until the “
ALL” indicator turns off.
9
ENGLISH
• The beginning of the first programmed track is found and the
pause mode is set.
¢ To start playback:
Press 1/3.
ENGLISH
Operation
Operation
Playing MP3 or WMA (Windows Media® Audio) files
Before playing MP3 or WMA files
There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA format. The music (files)
downloaded from such sites can be stored on CD-R or CD-RW discs and played on the DCD-F102.
“Windows Media” and “Windows” are registered trademarks or trademarks in the United States and other countries of the
Microsoft Corporation of the United States.
According to copyright laws, recordings you have made should only be used for your personal enjoyment and must not be used
in other ways without the consent of the copyright holder.
¢ Order in which the folders are played
If there are multiple folders containing MP3 or WMA files, the DCD-F102 automatically assigns the folders numbers when reading the disc.
The folders switch according to the numbers they have been assigned. If there are no playable files in a folder, that folder is ignored.
¢ Order in which files are played
The order in which the files are played depends on the folder structure attributed when the disc was created and other data recorded on
the disc when the files were recorded. With the folder structure shown in the following example, the files are played in numerical order (1,
2, 3 …).
The data stored on the disc depends on the writing software. Because of this, the files may not play in the desired order.
Folder q
(ROOT folder)
Folder w
Folder e
Folder r
Folder y
File 1
File 2
File 3
File 4
File 5
File 6
Folder t
File 7
File 8
File 9
File 10
10
ENGLISH
¢ Setting the folders and files to be played
(folder mode/file mode)
Use [FOLDER MODE] to switch between the modes.
• Folder mode
The “FLD” indicator lights.
Only the selected folder is played.
Example: When folder r is selected
Files 4, 5 and 6 are played.
Folder t is treated as a separate folder, so files 7 and 8
are not played.
• Disc mode (folder mode: OFF)
The “FLD” indicator turns off.
All the files in all the folders from the selected folder or file on are
played.
Example: When file 3 in folder e is selected
All the files from file 3 on are played.
ENGLISH
Operation
Operation
1/3
Listening to MP3 or WMA files in random order
(Random folder/disc play)
Playing MP3 or WMA files
a CD-R or CD-RW disc containing music files
1 Load
in MP3 or WMA (Windows Media Audio) format into
the disc tray (
page 2, 7).
steps 2
1 Perform
WMA files”.
-1
or
2-2 under “Playing MP3 or
in the folder mode:
Press [RANDOM].
2 When
Use [FOLDER MODE] to turn on the “FLD” indicator, 2
-1 then use [FOLDER] to select the folder to be played.
<8/6>
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
3 Press 1/3.
• The selected folder is displayed.
<7/9>
2
-2
• The “RANDOM” indicator lights.
About the disc mode:
Use [FOLDER MODE] to turn off the “FLD” indicator,
then use <8/6> or <7/9> ([8] or
[9]) to select the file to be played.
• The selected file is displayed.
• Either the files in the selected folder or all the files on the disc
are played in random order.
¢ To stop random folder/disc playback:
Press [RANDOM].
The “RANDOM” indicator turns off.
3 Press 1/3.
• The file name, title/artist name and title/album name scroll on
the display and playback starts.
[RANDOM]
[FOLDER MODE]
[REPEAT]
The title name, artist name and album name are only displayed if
that information is recorded on the disc.
[TIME/DISPLAY] can be used to switch the information displayed.
File Name
1/ 3
Title / Artist
Title / Album
[FOLDER]
¢ To change the folder to be played:
Use [FOLDER] to select a different folder.
[8]
[9]
[TIME/DISPLAY]
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
¢ To change the file to be played:
In the stop mode, use <8/6> or <7/9> ([8] or [9])
to select a different file.
• If the folder is selected in the play or pause mode, playback starts
from or the pause mode is set at the first track in the selected folder.
• If a copyright-protected WMA file or a file that cannot be played
normally is selected, “Not Support” is displayed. Use <8/6> or
<7/9> ([8] or [9]) to select a different file.
11
ENGLISH
• If [REPEAT] is pressed during random playback, the tracks are played
once in one random pattern, then played again in a different order.
Enjoy listening to them in a different order each time.
ENGLISH
Operation
Operation
1/3
Listening to MP3 or WMA files repeatedly
(Repeat folder/disc play)
Perform steps 2 or 2
1 WMA
files” (
page 11).
-1
-2
under “Playing MP3 or
2 Use [REPEAT] to select the repeat mode.
When in the folder mode:
<8/6>
<7/9>
1 FLD
FLD
(Repeat off) FLD
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
About the disc mode:
1
ALL
(Repeat off)
3 Press 1/3.
• Either the files in the selected folder or all the files on the disc
are played repeatedly.
[REPEAT]
¢ To stop repeat folder/disc playback:
Press [REPEAT] until the “
” indicator turns off.
1/ 3
[8]
[9]
[TIME/DISPLAY]
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
12
ENGLISH
NOTE:
• The DCD-F102 is compatible with “MPEG-1 Audio Layer-3”
standards (sampling frequency of 44.1 and 48 kHz). It is not
compatible with “MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio
Layer-3”, MP1 or MP2 standards.
• Programmed playback is not possible with discs containing files
recorded in MP3 or WMA format.
• The signals are output with a sampling frequency of 44.1 kHz.
• When writing MP3 files on a CD-R or CD-RW disc, set the writing
software’s format to “ISO9660 Level 1”. The files may not play
properly if they are recorded in other formats. Also note that with
some writing software it is not possible to record in ISO9660
format. If so, use a different program allowing you to record in
ISO9660 format.
• With MP3 files, the higher the bit rate, the better the sound
quality. The compatible bit rate range is 32 to 320 kbps for MP3
files, 64 to 160 kbps for WMA files. We recommend using MP3
files with bit rates of 128 kbps or greater on the DCD-F102.
• Be sure to add the extensions “.MP3” or “.WMA” to MP3 or
WMA files, respectively. Files with extensions other than
“.MP3” or “.WMA” or files without extensions cannot be
played. (On Macintosh computers, MP3 files can be played by
giving the extension “.MP3” after the file name consisting up a
maximum of 8 alphanumeric characters and storing the files on a
CD-R or CD-RW disc.)
• The DCD-F102 is not compatible with packet write software or
playlists.
• Up to 32 characters of folder and file names can be displayed.
• The DCD-F102 is compatible with MP3 ID3-Tag versions 1.x and
2.x.
• The time may not be displayed properly when searching or
pausing during variable bit rate playback.
• The time display cannot be switched using [TIME/DISPLAY].
• For files in which the title name and artist name data are stored,
the title name or artist name can be displayed in the play or pause
mode by pressing [TIME/DISPLAY].
• Multisession and CD-R/CD-RW discs that have not been
completely written can be played, but we recommend using
discs closed after a maximum of 10 sessions or discs that have
been completed.
• The DCD-F102 is compatible with the titles, artists and albums of
WMA file meta tags.
• The maximum number of files and folders playable is 512 (total
of the number of folders and files). The maximum number of
folders is 256.
• Copyright-protected WMA files cannot be played. (“Not
Support” is displayed. Use <8/6> or <7/9> ([8] or
[9]) to select a different file.)
ENGLISH
System Operations
System Operations
When this set is used with other components in the F102 series, it is possible to perform such system operations as synchronized recording
of CDs and to operate all the components with the system remote control unit (included with the receiver (DRA-F102/F102DAB)).
• All of the system operations are controlled from the receiver (DRA-F102/F102DAB).
• Also read the operating instructions of the various components.
System remote control unit
• Operate the set using the system remote control unit (RC-1034) included with the receiver (DRA-F102/F102DAB).
• Point the remote control unit at the remote control sensor on the receiver (DRA-F102/F102DAB) when operating it.
• The buttons shown below are used when operating this set. For a detailed description of their functions and operations, see the page
indicated in ( ) or operating instructions of the receiver (DRA-F102/F102DAB).
REPEAT button
········································(9, 12)
PROG button
··········································(8, 9)
CALL button
···············································(8)
RANDOM button
········································(8, 11)
FOLDER MODE button
·····································(10, 11)
DIMMER button
Adjusts the brightness of the
display.
CLEAR/DEL button
···············································(8)
Number buttons
(1 ~ 10, +10) ··················(8, 9)
CD Play/Pause button
(1/3) ·············(7 ~ 9, 11, 14)
FOLDER button
············································(11)
CD Stop button (2)
···············································(7)
Skip button (8)
···································(8, 9, 11)
Skip button (9)
···································(8, 9, 11)
TIME/DISPLAY button
·····································(11, 12)
No buttons other than the ones described above will operate.
13
ENGLISH
ENGLISH
System Operations
System Operations
Receiver [DRA-F102/F102DAB]
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
Press [CD 1/3 ] when the power of the various
components is set to the standby mode.
• The power of the various components turns on and the receiver’s
function automatically switches to “CD”.
• When a disc is loaded in the DCD-F102, the disc starts playing.
System remote control unit
[RC-1034]
<ON/STANDBY>
Auto power on function
The auto power on function does not work even when <CD 1/3>
is pressed.
MENU/SET
CD 1/3
This unit [DCD-F102]
CD 2
Auto function selection
CD 1/ 3
Press CD 1/3 during playback on one of the other
components.
CD 2
MENU/SET
• Playback stops.
• The receiver’s function automatically switches to “CD” and
playback of the disc starts.
<ON/STANDBY>
[9]
[TIME/DISPLAY]
Cassette deck [DRR-F102]
TAPE 2
CD synchronized recording
TAPE 2
This function lets you easily record the tracks from a CD onto a
cassette tape.
For instructions, see the cassette deck’s operating instructions.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
• All of the system operations are controlled from the receiver (DRAF102/F102DAB).
• It is also possible to connect devices other than F102 series
components. In this case, however, system operations cannot be
performed.
14
ENGLISH
Timer function
The receiver’s timer function can be used to perform playback at
specific times.
For instructions, see the receiver’s operating instructions.
ENGLISH
System Operations
System Operations
¢ Setting a specific cassette tape length:
Edit function
• This function lets you record onto cassette tapes with automatic
editing according to the length of the tape.
• Load the CD and cassette tape before starting.
1 Turn on the power of the various components.
2 Press MENU/SET three times in a row.
When “C –” is displayed, use [NUMBER] (1 ~ 10, +10) to input the
time.
Example: To set to 54 minutes
[+10] [+10] [+10] [+10] [+10] [4]
The length can be set to up to 99 minutes.
¢ Canceling the editing function:
Press CD 2 or <TAPE 2>.
• “EDIT” is displayed on the receiver’s display.
3
Use [9] to set the length of the cassette tape.
Example: To record onto a 60-minute cassette tape, use [9] to
select “C-60”.
C – 46
C – 60
C – 90
C–
Editing canceled
(The length of the cassette tape is the total length for sides A and B.)
• When the length of the cassette tape is set, the display alternates
between the track numbers to be recorded and the remaining time
for side A and the track numbers to be recorded and the remaining
time for side B.
A 01-09
Track number
4 Press CD 1/3.
• Recording of the CD starts.
-02:40
Remaining time
NOTE:
• The editing function does not work with discs containing 26
tracks or more.
• When using the edited recording function, be sure to load the
cassette tape with side A facing upwards. The beginning of the
cassette tape is found automatically before recording starts.
• When using a tape that is already recorded on, erase the tape
before conducting edited recording.
• When using the edited recording function, set the cassette
deck’s reverse mode to “
”.
• In some cases it may not be possible to record all the tracks on
the cassette tape even if its length is longer than the total length
of the tracks on the disc, due to the fact that the tracks must be
divided between sides A and B. “OVER” is displayed on the
DCD-F102’s display if there are tracks that cannot be recorded. If
“OVER” is displayed, change the length of the cassette tape as
described in step 3.
• When the editing function is in use, no buttons other than
<ON/STANDBY>, MENU/SET, [9], CD 1/3, CD 2, <TAPE 2> and
[TIME/DISPLAY] will operate.
• With edited recording, blank sections approximately 4 seconds
long are automatically created between tracks. If you do not want
these blank sections, do not use edited recording.
• Edited recording is not possible with discs containing files in MP3
or WMA format.
15
ENGLISH
ENGLISH
Others
Others
Troubleshooting
Specifications
If a problem should arise, first check the following:
1. Are the connections correct ?
2. Have you operated the player according to the Operating Instructions ?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
Symptom
Cause
Measures
¢ Audio performance
No. channels:
Frequency response:
Dynamic range:
S/N:
Harmonic distortion:
Separation:
Wow & flutter:
Analog audio output:
Page
Display does not light and
no sound is produced
when power is turned on.
• Power supply cord is not plugged • Plug the power supply cord into the
into power outlet.
power outlet.
6
“00 m 00 s” is shown on
the display even though a
CD is loaded.
• The disc is not properly loaded.
2
Disc is not played when
1/3 button is pressed.
• The disc is dirty or scratched.
• Wipe the dirt off the disc or replace
the disc.
3
No sound is produced or
sound is distorted.
• Incomplete connections with the • Check the connections.
various devices.
• The receiver’s function setting or • Check the receiver’s function and
adjustments are not right.
controls and adjust as necessary.
6
Specific section of the
disc cannot be played
properly.
• The disc is dirty or scratched.
• Wipe the dirt off the disc or replace
the disc.
3
Programmed playback is
not possible.
• The tracks have not been • Program properly.
programmed properly.
• You are playing a disc containing files • Programmed playback is not
in MP3 or WMA format.
possible with containing files in MP3
or WMA format.
8
A CD-R or CD-RW disc
cannot be played.
• The disc has not been finalized.
• Finalize the disc then play it.
• The recording conditions are bad or • Use a properly recorded disc.
the quality of the disc itself it poor.
2
–
“Not Support” is
displayed when playing
riles recorded in MP3 or
WMA format.
• You have selected a copyright- • Use the 8 /6 or 7 /9
button on the main unit (the 8 or
protected WMA file or a file that
9 button on the remote control
cannot be played normally.
unit) to select a different file.
¢ Usable discs:
• Reload the disc.
Diameter:
2 channels
2 Hz ~ 20 kHz
100 dB
105 dB
0.005 % (1 kHz)
95 dB
Below measurable limits (± 0.001 % W. peak)
Output level : 2.0 Vrms (LINE OUT)
Compact Disc
120 mm/80mm
¢ Signal format
Sampling frequency:
Quantization bit:
Transfer bit rate:
44.1 kHz
16-bit linear/channel
4.3218 Mb/seconds
¢ Digital output signal format
Format:
Optical output:
Emission wavelength:
–
Digital audio interface
–15 ~ –21 dBm
660 nm
¢ Pickup
Type:
Objective lens drive type:
Light source:
Wavelength:
–
Objective lens drive type pickup
Secondary parallel drive
Semiconductor laser
780 nm
¢ General
Power supply:
Power consumption:
Maximum external dimensions:
11, 12
Mass:
AC 230 V, 50 Hz
15 W
Standby : 0.1 W or less
250 (W) x 78 (H) x 250 (D) mm (Not including protruding parts)
250 (W) x 82 (H) x 260 (D) mm (Including protruding parts)
2.9 kg
* For purposes of improvement, specifications and design are subject to change without notice.
16
ENGLISH
TOKYO, JAPAN
www.denon.com
Denon Brand Company, D&M Holdings Inc.
Printed in China 00D 511 4463 004