Denon DMV-3700 DVD Player User Manual

DVD VIDEO AUTO CHANGER
DVM-3700
OPERATING INSTRUCTIONS
MODE D’EMPLOI
POWER FL DISPLAY
3
4
5
6
7
8
0
10
8
HDCD
AL24
RANDOM
REPEAT
CONTROL
DVM-3700
PLAY
STILL / PAUSE
STOP
OPEN / CLOSE
CLEAR
SLOW/SEARCH
- SKIP -
PCM AUDIO TECHNOLOGY / DVD VIDEO AUTO CHANGER
OPEN/CLOSE
2
9
B
V.S.S.
1
9
6
7
STOP STILL/PAUSE PLAY
3
2
1
MENU
TITLE
POWER
¢ ON / STANDBY
£ OFF
CONTROL
DISC SKIP
SKIP
SLOW / SEARCH
DISC 1
SELECT
DISC 2
REMOTE SENSOR
PHONES LEVEL
DISPLAY
RETURN
DISC 3
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
3
4
5
CALL
DISC 4
MIN
MAX
5 DVD Video Automatic Disc Loading System
PHONES
DISC 5
SET UP
REPEAT A-B REPEAT RANDOM
B
REMOTE CONTROL UNIT RC-542
FOR ENGLISH READERS
POUR LES LECTEURS FRANCAIS
PAGE 06 ~ PAGE 062
PAGE 63 ~ PAGE 119
IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
NOTE:
This DVD video player uses the semiconductor laser. To allow you to enjoy
music at a stable operation, it is recommended to use this in a room of 5°C
(41°F) — 35°C (95°F).
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or
deformed, it may cause electric shock or malfunction when used.
When removing from wall outlet, be sure to remove by holding the
plug attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON DEALER.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the DVD video player.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial number of your set
shown on the rating label.
Model No. DVM-3700
Serial No.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PESONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
• FOR U.S.A. & CANADA MODEL ONLY
CAUTION
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
• POUR LES MODELES AMERICAINS ET
CANADIENS UNIQUEMENT
ATTENTION
POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER
CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE
PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS
EN LAISSER AUCUNE PARTIE A DECOUVERT.
2
ENGLISH
FRANCAIS
FRONT PANEL
PANNEAU AVANT
e tu
w ry i o
q
B
PCM AUDIO TECHNOLOGY / DVD VIDEO AUTO CHANGER
HDCD
AL24
RANDOM
REPEAT
!3 !5 !7
!1 !2 !4 !6
!0
DVM-3700
PLAY
STILL / PAUSE
STOP
!8
OPEN / CLOSE
POWER
¢ ON / STANDBY
£ OFF
CONTROL
DISC SKIP
SKIP
SLOW / SEARCH
DISC 1
DISC 2
REMOTE SENSOR
PHONES LEVEL
DISC 3
DISC 4
MIN
MAX
5 DVD Video Automatic Disc Loading System
PHONES
DISC 5
@2 @1
@0
!9
REAR PANEL
PANNEAU ARRIERE
@3
@4
@9 #1
@6 @7 @8 #0
@55
1
2
VIDEO OUT
3
1
2
S-VIDEO OUT
Y
Cb
COMPONENT
VIDEO OUT
Cr
R
L
ANALOG OUT
OUT
COAXIAL OPTICAL
IN
DIGITAL OUT
(PCM/BITSTREAM)
REMOTE
CONTROL
OUT
CONTROL
#2
SAFETY INSTRUCTIONS
12.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
Heed Warnings – All warnings on the appliance and in
the operating instructions should be adhered to.
14.
Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
4.
Follow Instructions – All operating and use instructions
should be followed.
15.
Power Lines – An outdoor antenna should be located
away from power lines.
5.
Water and Moisture – The appliance should not be used
near water – for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
16.
6.
Carts and Stands – The appliance should be used only
with a cart or stand that is recommended by the
manufacturer.
6A.
An appliance and cart
combination should be
moved with care.
Quick stops, excessive
force, and uneven
surfaces may cause
the appliance and cart
combination to overturn.
Outdoor Antenna Grounding – If an outside antenna is
connected to the receiver, be sure the antenna system
is grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire
to an antenna-discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements
for the grounding electrode. See Figure A.
17.
Nonuse Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
18.
Object and Liquid Entry – Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
19.
Damage Requiring Service – The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
20.
Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
1.
Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2.
Retain Instructions – The safety and operating
instructions should be retained for future reference.
3.
7.
Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8.
Ventilation – The appliance should be situated so that
its location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9.
Heat – The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.
10.
Power Sources – The appliance should be connected to
a power supply only of the type described in the
operating instructions or as marked on the appliance.
11.
Grounding or Polarization – Precautions should be taken
so that the grounding or polarization means of an
appliance is not defeated.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
4
FRANCAIS
ENGLISH
NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION
• Keep the set free from moisture, water,
and dust.
• Protéger l’appareil contre l’humidité, l’eau
et lapoussière.
• Do not let foreign objects in the set.
• Ne pas laisser des objets étrangers dans
l’appareil.
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une
étagère.
• Unplug the power cord when not using the
set for long periods of time.
• Débrancher le cordon d’alimentation
lorsque l’appareil n’est pas utilisé pendant
de longues périodes.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
* (For sets with ventilation holes)
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d’aération.
• Do not let insecticides, benzene, and
thinner come in contact with the set.
• Ne pas mettre en contact des insecticides,
du benzène et un diluant avec l’appareil.
• Never disassemble or modify the set in any
way.
• Ne jamais démonter ou modifier l’appareil
d’une manière ou d’une autre.
CAUTION:
At the bottom of the player there is shipping screw for use when the player is transported.
Before using the player, turn the shipping screw (located under the player) counterclockwise and
remove it.
The player cannot start playing unless this screw is removed.
Keep this screw for future use.
When the player is going to be transported, remove the discs and close the disc tray. Turn off the power
after “000 00 00” is displayed, then unplug the power cable from the outlet. Insert the shipping screw
and turn clockwise. Tighten until secure.
B
ATTENTION:
Au-dessous du lecteur se trouve une vis de transport qui doit être utilisée pour transporter l’appareil.
Avant d’utiliser le lecteur, dévissez cette vis de transport (située sous le lecteur) en tournant en sens
inverse des aiguilles d’une montre et retirez-la.
Le lecteur ne peut pas fonctionner tant que cette vis n’est pas enlevée.
Conservez cette vis pour une utilisation ultérieure.
Lorsque le lecteur va devoir être transporté, retirez les disques et fermer le tiroir à disque. Eteignez
l’appareil après que “000 00 00” soit affiché, puis débranchez le câble d’alimentation de la prise.
Insérrez la vis de transport et vissez-là dans le sens des aiguilles d’une montre. Serrez à fond.
Copyrights / Droits d’auteur
2 It is prohibited by law to reproduce, broadcast, rent or play discs in public without the consent of the copyright holder.
2 La reproduction, la diffusion, la location, le prêt ou la lecture publique de ces disques sont interdits sans le consentement du détenteur des droits
d’auteur.
5
ENGLISH
— TABLE OF CONTENTS —
z
x
c
v
b
n
m
,
.
⁄0
Features ……………………………………………………………6, 7
Discs …………………………………………………………………8
Cautions on Handling Discs ………………………………………9
Connections ……………………………………………………10~14
Part Names and Functions ……………………………………15, 16
Remote Control Unit …………………………………………17, 18
Loading Discs …………………………………………………19, 20
Playback ………………………………………………………21~25
Using the GUI Screens ………………………………………26~30
Marking Scenes You Want to See Again ………………………31
⁄1
⁄2
⁄3
⁄4
⁄5
⁄6
⁄7
⁄8
⁄9
Playing Repeatedly ……………………………………………32, 33
Playing Tracks in the Desired Order …………………………34, 35
Playing the Tracks in Random Order ……………………………35
100 CD Changer Control Function ………………………………36
Using the Multiple Audio, Subtitle
and Angle Functions …………………………………………37~41
Using the Menus ………………………………………………42, 43
Changing the Default Settings ………………………………44~60
Troubleshooting ……………………………………………………61
Main Specifications ………………………………………………62
• ACCESSORIES
Please check to make sure the following items are included with the main unit in the carton:
The DVM-3700 is DENON’s top grade DVD video auto
changer equipped with the latest in digital technology. This
includes AL 24 Processing, a newly developed analog
waveform reproduction technology with sights on next
generation media, as well as a multi 24-bit D/A converter with
96 kHz sampling compatibility taking maximum advantage of
the high quality offered by AL 24 Processing.
1. Newly developed AL 24 Processing
(1) AL 24 Processing, an advanced version of conventional
APLHA Processing, is a newly developed analog
waveform reproduction technology, and offers
compatibility with the high number of bits and high
sampling rates of next generation media. AL 24
Processing compensates the input digital data to
reproduce the sound with analog waveforms as close
as possible to those existing in nature and with 24-bit
quality. The result is increased musical reproduction
capabilities of reverberations, etc., at low levels, for a
sound that seems to draw you into the concert hall.
(2) AL 24 Processing of course carries over Adaptive Line
Pattern Harmonized Algorithm & Automatic Low Pass
Filter Harmonic Adjustment, the strong points of
conventional ALPHA Processing. On the DVM-3700
these filters have been dramatically improved, resulting
6
ENGLISH
4.
Dolby Digital (AC-3) bitstream output compatibility
(NOTE 1)
The DVM-3700 is compatible with Dolby Digital (AC-3)
bitstream output. When a Dolby Digital (AC-3) decoder is
connected, the three-dimensional sense and positioning
of the sound is recreated extremely naturally, resulting in
a strong sense of presence, as if you were in a movie
theater or concert hall.
5.
®, HDCD ® (High Definition Compatible
®
Digital ) decoder (NOTE 2)
HDCD is an encoding/decoding technology that greatly
reduces the distortion occurring at the time of digital
recording while maintaining compatibility with the
conventional CD format. HDCD allows 24-bit data to be
converted into the 16-bit data of current CDs with no loss
in sound quality.
The use of this HDCD decoder makes it possible to
achieve the high resolution and low distortion
characteristic of HDCD when playing HDCD-compatible
discs, and DENON’s digital technology optimizes the
high sound quality possibilities of HDCD technology.
Furthermore, normal CDs, DVDs and HDCD-compatible
CDs are automatically identified, and the optimum digital
signal processing for that type of disc is used.
6.
DTS bitstream output compatibility (NOTE 3)
The DVM-3700 is compatible with DTS bitstream output,
an optional audio format for DVD video. DTS sound can
be enjoyed by connecting a commercially available DTS
decoder and AV amplifier.
7.
Advanced Virtual Surround Sound (V.S.S.) function
Even when just two front speakers are being used, the
user can simply press the V.S.S. (Virtual Surround Sound)
button during playback of a Dolby Digital DVD (2 channel
and above) to provide a rear surround effect. (This does
not work with DVD Karaoke discs. In addition, this effect
may differ depending on the kind of DVD used.)
High picture quality thanks to a 10-bit video D/A
converter
(1) The 8-bit/13.5 MHz brightness and color component
signals recorded on DVDs are expanded to 10-bit/27
MHz signals and requantized, leaving room to spare in
the processing of the recorded signals to provide the
beautiful pictures DVDs have to offer. Furthermore,
color component video output terminals are provided
for even more faithful reproduction of the colors.
(2) An array of picture quality modes yielded by digital
processing
Signal deterioration is kept to the minimum by
processing the data as digital data.
This feature can be used as the picture quality setting
individually tailored for DVD playback.
• Digital Cinema Mode
Using the On-Screen Menu Icons enables the
cinema mode, which is best for the playback of
movie programs, to be selected.
In addition, the picture quality best suited to the
type of solftware programs concerned can be
selected. In all, four picture quality modes are
provided: normal, soft, fine and cinema.
• User selection
Using the On-Screen Menu Icons, the contrast,
color hue, equalizer and brightness can be adjusted
to suit your own preference.
• Monitor selector
Once the type of TV used [Standard (Direct View
TV), CRT Projector, LCD Projector, Projection TV]
has been selected when the initial setting
operations are performed, the optimum picture
quality for the type of TV concerned will be
automatically selected.
9. Many convenient functions
(1) Multiple audio function
Selection of up to 8 audio languages.
(The number of languages offered differs from DVD to
DVD.)
(2) Multiple subtitle function
Selection of up to 32 subtitle languages.
(The number of languages offered differs from DVD to
DVD.)
(3) Multiple angle function
The angle of view can be changed.
(For DVDs on which multiple angles are recorded.)
(4) GUI (Graphical User Interface) function
The on-screen display button on the remote control unit
can be used to display player and disc information on
the TV screen.
(5) Marker function
The positions of up to five scenes can be stored in the
memory, so you can watch your favorite scenes
whenever you want.
(6) Playback disable function
This function can be used to disable playback of DVDs
you do not want children to watch.
8.
NOTES:
1. Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Work.
©1992 – 1997 Dolby Laboratories, Inc. All rights
reserved.
®, HDCD®, High Definition Compatible Digital®
2.
and Pacific Microsonics™ are either registered
trademarks or trademarks of Pacific Microsonics, Inc. in
the United States and/or other countries. HDCD system
manufactured under license from Pacific Micorsonics,
Inc. This product is covered by one or more of the
following: In the USA: 5,479,168, 5,638,074, 5,640,161,
5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531,
and in Australia: 669114. Other patents pending.
3. “DTS” is a trademark of Digital Theater Systems, Inc.
7
ENGLISH
2 DISCS
• The types of discs listed on the table below can be used on the DVM-3700.
The marks are indicated on the disc labels or jackets.
Usable
discs
Mark
(logo)
Recorded
signals
Maximum
recording time
12 cm
Approx. 240
minutes per side
Approx. 480
minutes for both
sides
8 cm
Approx. 80
minutes per side
Approx. 160
minutes for both
sides
12 cm
74 minutes
8 cm
20 minutes
12 cm
74 minutes
8 cm
20 minutes
Digital audio +
digital video
(MPEG2)
DVD video
Digital audio +
digital video
(MPEG1)
Video CD
DVM-3700:
DVD with Region No. other than “1” or “ALL”
Disc of PAL system
VSD
DVD+RW
DVD-ROM
CDV
CVD
DVD-R/DVD-RAM
CD-G
SVCD
CD-ROM
CD-R/RW
Divx Video Disc etc.
Do not try to play Photo CD or CD-R.
(Otherwise, data on the disc may be damaged.)
* If you attempt to play CD-R or photo CD, the data on the
disc may be damaged.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Digital audio
CD
• Playback control (video CDs)
2 Disc terminology
• Titles and chapters (DVDs)
DVDs are divided into several large sections called “titles” and
smaller sections called “chapters”.
Numbers are allotted to these sections. These numbers are
called “title numbers” and “chapter numbers”.
For example:
Chapter 3
Chapter 1 Chapter 2
• Tracks (video and music CDs)
Video and music CDs are divided into sections called “tracks”.
Numbers are allotted to these sections. These numbers are
called “track numbers”.
For example:
Track 1
Track 2
Video CDs including the words “playback control” on the disc or
jacket are equipped with a function for displaying menus on the
TV screen for selecting the desired position, displaying
information, etc., in dialog fashion.
In this manual, playing video CDs using such menus is referred
to “menu playback”.
Video CDs with playback control can be used on the DVM-3700.
Title 2
Title 1
Chapter 1 Chapter 2
8
2 The following types of discs cannot be played on the
Disc
size
Track 3
Track 4
Track 5
NOTE:
• This DVD video player is designed and
manufactured to respond to the Region
Management Information that is recorded on a
DVD disc.
If the Region number described on the DVD
disc does not correspond to the Region number
of this DVD video player, this DVD video player
cannot play this disc.
The Region number for this DVD video player is
1.
1
ENGLISH
3 CAUTIONS ON HANDLING DISCS
Discs
Cautions on Handling Discs
Only the discs including the marks shown on page 8 can be played
on the DVM-3700.
Note, however, that discs with special shapes (heart-shaped discs,
hexagonal discs, etc.) cannot be played on the DVM-3700. Do not
attempt to play such discs, as they may damage the player.
Holding Discs
• Do not get fingerprints, grease or dirt on discs.
• Be especially careful not to scratch discs when removing them
from their cases.
• Do not bend discs.
• Do not heat discs.
• Do not enlarge the center hole.
• Do not write on the labeled (printed) side with a ball-point pen or a
pencil.
• Water droplets may form on the surface if the disc is moved
suddenly from a cold place to a warm one. Do not use a hairdryer,
etc., to dry the disc.
Cautions on Storing Discs
Avoid touching the surface of discs when loading and unloading
them.
Be careful not to get fingerprints on
the signal surface (the side which
shines in rainbow colors).
Cleaning Discs
• Always eject discs after playing them.
• Keep discs in their cases to protect them from dust, scratches and
warping.
• Do not put discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Humid or dusty places
3. Places exposed to heat from heaters, etc.
Cautions on Loading Discs
2 Fingerprints or dirt on the disc may lower sound and picture
quality or cause breaks in playback. Wipe off fingerprints or dirt.
2 Use a commercially available disc cleaning set or a soft cloth to
wipe off fingerprints or dirt.
Wipe gently from the middle
outwards.
Do not wipe with a circular motion.
• Only load one disc at a time. Loading one disc on top of another
may result in damage or scratch the discs.
• Load 8 cm discs securely in the disc guide, without using an
adapter. If the disc is not properly loaded, it may slip out of the
guide and block the disc tray.
• Be careful not to let your fingers get caught when the disc tray is
closing.
• Do not place anything but discs in the disc tray.
• Do not load cracked or warped discs or discs that have been fixed
with adhesive, etc.
• Do not use discs on which the adhesive part of cellophane tape or
glue used to attach the label is exposed, or discs with traces of
tape or labels that have been peeled off. Such discs may get
stuck inside the player, resulting in damage.
NOTE:
• Do not use record spray or antistatic. Also do not use volatile
chemicals such as benzene or thinner.
Record
spray
Thinner
Benzene
9
ENGLISH
4 CONNECTIONS
NOTES:
• Read the manuals of all the components when making • Plug the power cord securely into the power outlet. Incomplete
connection may result in noise.
connections.
• Keep the power cord unplugged until all connections have been • Binding the power cord together with connection cords may result
in humming or noise.
completed.
• If the power is on when connections are made, noise may be • Plug in the power cord in the direction in which the sound is most
to your liking.
generated and damage the speakers.
• Be sure to connect the left and right channels properly, L (left) to
L, R (right) to R.
(1) Connecting to an AV TV
• Use the included video/audio cord to connect the TV’s video input connectors and audio input connector to the DVM-3700’s video output
connectors and audio output connector.
DVM-3700
1
2
VIDEO OUT
1
Y
2
S-VIDEO OUT
Cb
COMPONENT
VIDEO OUT
Cr
R
L
ANALOG OUT
OUT
COAXIAL OPTICAL
IN
DIGITAL OUT
(PCM/BITSTREAM)
REMOTE
CONTROL
OUT
CONTROL
S-Video output connector
The video signals are divided into color (C) and
brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input
connector, we recommend connecting it to the
DVM-3700’s S-Video output connector using a
commercially available S-Video connection cord.
To power outlet
TV
L
R
VIDEO IN
S-VIDEO IN
AUDIO IN
Video equipment you own
Standard
(Direct View TV)
(See pages 10 and 11.)
Conventional TV set (4:3),
Wide-screen TV set (16:9),
Digital TV etc.
10
CRT projector
(See pages 10 and 11.)
Cinema-size images can be
enjoyed by projecting from
three light sources onto a
large screen.
LCD projector
(See pages 10 and 11.)
Cinema-size images can be
enjoyed by projecting from
an LCD panel onto a large
screen.
Projection TV
(See pages 10 and 11.)
Powerful images can be
enjoyed with a large rear
screen projector.
ENGLISH
NOTES:
• Connect the DVM-3700’s video outputs to the TV either directly or • Some discs contain copy prohibit signals. If such discs are played
via a VCR, the copy prohibit system may cause disturbance in the
through an AV amplifier. Do not connect it via a VCR (video
picture.
cassette recorder).
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Color component output connectors (Cr, Cb and Y)
The red (Cr), blue (Cb) and brightness (Y) signals are output independently, achieving more faithful reproduction of
the colors.
• The color component input connectors may be marked differently on some TVs or monitors (Pr, Pb and Y/R-Y, BY and Y/Cr, Cb and Y, etc.). For details, refer to the TV’s operating instructions.
1
2
VIDEO OUT
1
2
S-VIDEO OUT
Y
Cb
Cr
COMPONENT
VIDEO OUT
R
L
ANALOG OUT
OUT
COAXIAL OPTICAL
IN
DIGITAL OUT
(PCM/BITSTREAM)
REMOTE
CONTROL
OUT
CONTROL
DVM-3700
To power outlet
TV
L
Y
Cb
Cr
COMPONENT VIDEO IN
R
AUDIO IN
NOTE:
• Use three commercially available 75 Ω/ohm pin-plug cord to connect the DVM-3700’s color component output connectors to the TV or
monitor.
11
ENGLISH
(3) Connecting to a Dolby Digital (AC-3) or DTS (digital theater systems) Decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital audio
output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie
theater or concert hall.
TV
VIDEO IN
DVM-3700
1
2
VIDEO OUT
1
2
S-VIDEO OUT
Y
Cb
Cr
COMPONENT
VIDEO OUT
R
L
ANALOG OUT
OUT
COAXIAL OPTICAL
IN
DIGITAL OUT
(PCM/BITSTREAM)
REMOTE
CONTROL
Digital audio input
connector (COAXIAL)
OUT
CONTROL
Center speaker
Front speaker (right)
Front speaker (left)
Digital audio input
connector (OPTICAL)
Subwoofer
Dolby Digital (AC-3) or
DTS decoder (digital
surround processor)
Surround speaker (left)
Surround speaker (right)
AV amplifier
(AV control center)
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Dust cap
Line up in proper direction
Remove the dust cap, line up the cable in the proper directly, then
insert it securely as far as it goes.
12
NOTE:
• Store the dust cap in a safe place, and be careful not to lose it.
When not using the terminal, attach the cap to protect the
terminal from dust.
ENGLISH
2 Sound output from the DVM-3700’s digital audio output connectors
Disc played
Audio recording format
Sound output
• Dolby Digital bitstream (1 to 5.1 channels) or PCM (48 kHz/16 bit) (2 channels). (NOTE 1, 2)
Dolby Digital (AC-3)
* Select with the “Digital Audio Output” default setting. (See page 56.)
• dts bitstream or no output.
* Select with the “Digital Audio Output” default setting. (See page 56.)
DTS
DVD video
Linear PCM
48 kHz/96 kHz
16/20/24 bit
• Linear PCM (48 kHz/16 bit only) (2 channels) or no output. (NOTE 2)
* Select with the “Digital Audio Output” default setting. (See page 56.)
MPEG1
Video CD
CD
• PCM (44.1 kHz) (NOTE 1)
Linear PCM
• Linear PCM (44.1 kHz)
NOTE 1: The type of audio output from the connector can be selected by “7 Digital Audio Output” of the initial setting. (See page 56.)
NOTE 2: Compressed audio is converted to PCM before output.
NOTE:
• Some dts decorders which do not support DVD- dts interface may not work properly with the DVD video auto changer.
• Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing higher
sound quality than music CDs.
(4) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
TV
* Set the “Digital Audio Output” default setting as shown below.
(See page 56.)
• “LPCM 96k / 48k” / “NO”
• “Dolby Digital” / “PCM”
• “dts” / “OFF”
Playing DVDs with incorrect settings may result noise that could
damage your ears or the speakers.
VIDEO IN
1
2
VIDEO OUT
1
2
S-VIDEO OUT
Y
Cb
COMPONENT
VIDEO OUT
Cr
R
L
ANALOG OUT
OUT
COAXIAL OPTICAL
IN
DIGITAL OUT
(PCM/BITSTREAM)
REMOTE
CONTROL
OUT
CONTROL
B
8
9
Digital audio input
connector (OPTICAL)
DVM-3700
Digital audio input
connector (COAXIAL)
13
ENGLISH
(5) Connecting to a Stereo Component
TV
VIDEO IN
DVM-3700
1
2
VIDEO OUT
1
2
S-VIDEO OUT
Y
Cb
COMPONENT
VIDEO OUT
Cr
R
L
ANALOG OUT
OUT
COAXIAL OPTICAL
IN
DIGITAL OUT
(PCM/BITSTREAM)
REMOTE
CONTROL
OUT
CONTROL
Stereo component
NOTE:
• Use commercially available 75 Ω/ohm pin-plug cord to connect the DVM-3700‘s video out connector to the TV or monitor.
14
ENGLISH
5 PART NAMES AND FUNCTIONS
(1) Front Panel
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
POWER button
• Press once to turn the power on.
• Press again to set to the “OFF” position and turn the power
off.
• Set the power to the standby mode by pressing the POWER
button on the remote control unit while the power is on.
• Turn the power on from the standby mode by pressing the
POWER button on the remote control unit.
Power indicator
• This indicator lights when the power is on and when the
power is in the standby mode.
!6
STOP button (2)
!7
SLOW/SEARCH button (7)
!8
!9
@0
CONTROL button
• Press this button to set the control mode. In the control
mode, the separately sold 100 CD changer (DCM-5000/5001)
can be operated using the buttons on the DVM-3700 or the
included remote control unit (RC-542).
• The CONTROL OUT connector on the rear panel of the DVM3700 must be connected to the REMOTE CONTROL IN
connector on the separately sold 100 CD changer (DCM5000/5001) in order to use this function.
@1
@2
• Press this to stop the disc. (See page 23.)
• Press the button in the play mode to search in the forward
direction.
• Press the button in the still mode for slow play in the forward
direction.
OPEN/CLOSE button (5)
• Press this button to open and close the disc tray.
Disc number button (1~5)
• Press these button to specify which disc you want to play.
Disc tray (1~5)
• Load discs here.
• Press the OPEN/CLOSE button !8 to open and close the disc
tray.
• The disc tray is also closed when the PLAY button !2 is
pressed.
PHONES jack
• Use this to connect separately sold headphones.
PHONES LEVEL control
• Use this to adjust the output level of the headphones jack.
RANDOM button
• Press this button to begin random play.
• Pressing this button during stop, and press play button play
to full automatic random play.
• This button does not work when playing DVDs.
HDCD indicator
(2) Rear Panel
@3
Video output connectors (VIDEO OUT)
AL 24 indicator
@4
S-Video output connectors (S-VIDEO OUT)
• This indicator lights when the audio signals of a DVD, etc.,
are being processed digitally with the AL 24 processor, a
newly developed analog waveform reproduction technology.
@5
Component video output connectors (COMPONENT)
@6
ANALOG OUT connectors
• This indicator lights when playing discs recorded in HDCD®
format.
REPEAT button
• Press this button for repeated playback. (Refer to page 32 for
details.)
DISC SKIP button
• Each time this button is pressed, the carousel will rotate in a
clockwise direction to the next tray position. This allows for
loading or unloading of discs.
• This button is also used to select the next disc, in the normal
play continuously.
Remote control sensor (REMOTE SENSOR)
@7
@8
Display
• Information on the disc that is currently playing is shown on
the display. (See page 16.)
@9
SKIP button (8)
• Press this to move back to the beginning of the current track
(or chapter).
• Press again to move back to the beginning of the previous
track (or chapter).
#0
PLAY button (1)
• Press this to play the disc.
SKIP button (9)
• Press this to move ahead to the beginning of the next track
(or chapter).
#1
STILL/PAUSE button (3)
• Press this button to stop play temporarily.
SLOW/SEARCH button (6)
• Press this button in the play mode to search in the reverse
direction.
• Press the button in the still mode for slow play in the reverse
direction.
#2
• Connect using the included video cord.
• Connect using an S-Video connection cord (available in
stores).
• Connect using video cords (available in stores).
• Connect these to the input connectors of an amplifier, etc.,
to hear the sound of the DVM-3700 over the speakers
through the amplifier.
Digital audio output connector (COAXIAL)
• Connect using an audio cord. Connect a commercially
available 75 Ω/ohms pin-plug cord.
• Digital data is output from this connector.
Digital audio output connector (OPTICAL)
• Connect using an optical fiber cable (available in stores).
• Digital data is output from this connector.
Remote control input connector
(REMOTE CONTROL IN)
• This is the input connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
Remote control output connector
(REMOTE CONTROL OUT)
• This is the output connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
Control output connector (CONTROL OUT)
• Connect with the REMOTE CONTROL IN connector of a
separately sold 100 CD changer (DCM-5000/5001) to control
the 100 CD changer from the DVM-3700.
Power cord
• Plug this into a wall power outlet.
15
ENGLISH
(3) Display
Play Indicator
Source Indicators
These indicate the type of disc
currently playing.
Still/Pause Indicator
Angle Indicator
Random Indicator
Repeat Indicator
Program Indicator
Music calendar
• The title/chapter number is
displayed here for DVDs, the
track number for video and
music CDs.
• The title and elapsed track
time are displayed here during
playback.
24 bit Indicator
• Lights during playback of 24bit linear PCM sound.
96 kHz Indicator
• Lights during playback of linear PCM sound
with a sampling frequency of 96 kHz.
Disc Indicator
• The number of the trays in which discs are loaded light.
16
•“
” lights for tray numbers in which CDs and Video CDs are loaded.
•“
” lights for tray numbers in which DVDs are loaded.
ENGLISH
6 REMOTE CONTROL UNIT
2 The DVM-3700 can be controlled from a distance using the included remote control unit (RC-542).
(1) Inserting Batteries
q Remove the remote control unit’s rear cover.
w Place two batteries (“AA” (R6P)) in the battery compartment in
the direction indicated by the marks.
Cautions On Batteries
• Use batteries (“AA” (R6P)) in this remote control unit.
• Replace the batteries with new ones approximately once a
year, though this depends on the frequency with which the
remote control unit is used.
• If the remote control unit does not operate from close to the
main unit, replace the batteries with new ones, even if less
than a year has passed.
• When inserting the batteries, be careful to do so in the proper
direction, following the < and > marks in the remote control
unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose of
batteries in flames.
• Remove the batteries when not planning to use the remote
control unit for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from the
inside of the battery compartment, then insert new batteries.
e Close the rear cover.
(2) Using the Remote Control Unit
Approx. 7 meters
B
30°
• When operating the remote control unit, point it at the remote
control sensor as shown on the diagram.
• The remote control unit can be used from a direct distance of
approximately 7 meters. This distance will be shorter,
however, if there are obstacles in the way or if the remote
control unit is not pointed directly at the remote control
sensor.
• The remote control unit can be operated at a horizontal angle
of up to 30° with respect to the remote control sensor.
30°
8
9
6
7
3
1
B
NOTES:
• It may be difficult to operate the remote control unit if the remote control sensor is exposed to direct sunlight or strong artificial light.
• Do not press buttons on the main unit and on the remote control unit at the same time. Doing so will result in malfunction.
17
ENGLISH
(3) Names and Functions of Remote Control Unit Buttons
FL DISPLAY button
V.S.S. button
Press this to display audio information on
the currently playing disc on the
fluorescent display.
Sets the virtual surround sound.
(Functions when playing DVDs
recorded in Dolby Digital with
two or more channels.)
OPEN/CLOSE button
CLEAR button
Press this to clear numbers that you have
input.
POWER button
Press this to switch the power between
on and standby.
SLOW/SEARCH buttons
Number buttons
Use these to input numbers.
Use the ≥10 button to input numbers of
10 or over.
Example: To input 25
PLAY button
STILL/PAUSE button
SKIP buttons
POWER FL DISPLAY
CONTROL button
V.S.S.
OPEN/CLOSE
1
2
3
4
5
6
7
8
9
0
10
MENU button
Press this to display the DVD menu
recorded on the disc.
RETURN button
STOP button
SLOW/SEARCH
- SKIP 8
TITLE button
CONTROL
9
6
3
Cursor buttons/SELECT button
Use the • and ª buttons to select in the
vertical direction.
Use the 0 and 1 buttons to select in the
horizontal direction.
Press the SELECT button to select the
item selected with the cursor buttons.
DISPLAY button
Press this to display the GUI screen.
MARKER button
1
MENU
TITLE
Press this to return to the previous menu
screen.
7
STOP STILL/PAUSE PLAY
2
Press this to display the title menu
recorded on the disc.
CLEAR
SELECT
Press this to mark places you want to see
again.
ANGLE button
DISPLAY
RETURN
Press this to switch the angle.
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
PROG/DIRECT button
3
4
5
CALL
Press this to switch between the normal
play, programmed play.
SET UP
REPEAT A-B REPEAT RANDOM
CALL button
SUBTITLE button
B
Press this to switch the DVD’s subtitle
language.
RANDOM button
AUDIO button
For DVDs, press this to switch the audio
language. For video CDs, press this to
switch the channel between “LR”, “L”
and “R”.
A-B REPEAT button
Use this to repeat sections between two
specific points.
DISC SKIP button
Disc Number button (1 ~ 5)
SET UP button
Press this to display the default setting
screen.
18
Press this to check the program contents.
REMOTE CONTROL UNIT RC-542
REPEAT button
ENGLISH
IMPORTANT SETUP INFORMATION
This set has the following presettings: “Disc Languages”, “Ratings”, “Menu Language”, “On-Screen Messages”, “FL Display”, “TV
Aspect”, “Digital Audio Output” and “Other Settings”.
These presettings have been preset upon shipment from the factory. If you wish to change them to suit your specific purposes, refer to pages
44 to 60.
7 LOADING DISCS
2 Set discs in the disc tray with the labeled (printed) side facing up.
5 DVD Video Automatic Disc Loading System
8 cm disc guide
12 cm disc guide
Disc tray
NOTES:
• Do not move the DVM-3700 while a disc is playing. Doing so may scratch the disc.
• For discs on which both sides can be played, load the disc with the side you want to play facing down.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
OPEN/CLOSE button
5 DVD Video Automatic Disc Loading System
Disc tray
NOTES:
• Be sure to turn on the power before opening and closing the disc tray.
• Do not strike on the button with a pencil, etc.
19
ENGLISH
(2) Loading Discs
How to load a disc
• Make sure the drawer is completely open.
• Hold the disc by the edges and place it on the disc tray. (Do not
touch the signal surface, i.e., the glossy side.)
• Set the disc properly in the tray according to its size.
Set 8 cm discs in the center hole.
Set 12 cm discs in the outer hole.
• When the drawer is opened during the stop mode, discs can be
loaded in the 5 disc trays. If the DISC SKIP button is pressed, the
carousel turns and a disc can be loaded in the another disc tray.
When the drawer is opened during the play mode, it is possible to
load and unload discs in all of the disc trays other than the one
whose disc is currently playing. 5 discs can be replaced and press
the DISC SKIP button to switch the other disc tray that can be
replaced.
• Press the OPEN/CLOSE button (5) to close the drawer.
NOTES:
• Remove all discs before moving the player.
• The player will not operate properly and the disc may even be
damaged if it is not set correctly.
• If your finger should get caught in the drawer when it closes,
press the OPEN/CLOSE button (5).
• Do not place any foreign objects on the disc tray, and do not
place more than one disc on the tray at a time. Otherwise
malfunction may occur.
• Do not push in the disc tray manually when the power is off as
this may cause malfunction and damage the DVD video auto
changer.
• Do not touch the carousel while it is turning. Also, do not turn
the carousel by hand when it is stopped. Doing so could
damage it.
• Do not insert disc where indicated by arrow.
This could damage the internal mechanism in the unit.
• Do not hit the set strongly when a disc is loaded. Doing so may
scratch the disc or cause the DVD video auto changer to stop
operating.
5 DVD Video Automatic Disc Loading System
LABEL SIDE
UP WARD
5 DVD Video Automatic Disc Loading System
5 DVD Video Automatic Disc Loading System
5 DVD Video Automatic Disc Loading System
20
ENGLISH
8 PLAYBACK
(1) Playback
1
3
4
2
POWER FL DISPLAY
B
PCM AUDIO TECHNOLOGY / DVD VIDEO AUTO CHANGER
HDCD
DVM-3700
PLAY
STILL / PAUSE
STOP
V.S.S.
OPEN/CLOSE
1
2
3
4
5
6
7
9
0
10
OPEN / CLOSE
AL24
POWER
¢ ON / STANDBY
2
£ OFF
CONTROL
RANDOM
REPEAT
DISC SKIP
SKIP
SLOW / SEARCH
DISC 1
DISC 2
8
REMOTE SENSOR
PHONES LEVEL
DISC 3
CLEAR
DISC 4
MIN
MAX
5 DVD Video Automatic Disc Loading System
PHONES
DISC 5
SLOW/SEARCH
- SKIP 8
9
CONTROL
6
7
STOP STILL/PAUSE PLAY
2
3
1
MENU
TITLE
4
POWER
¢ ON / STANDBY
1
£ OFF
Turn on the power.
• The power indicator lights and the power turns on.
Main unit
OPEN / CLOSE
OPEN/CLOSE
2
Press the OPEN/CLOSE button to open the disc tray.
Main unit
3
Remote control unit
Set the disc to be played in the front side tray.
5 DVD Video Automatic Disc Loading System
PLAY
PLAY
1
4
Press the PLAY button.
• The disc tray closes automatically and playback begins.
• If the disc tray is closed with the OPEN/CLOSE button,
press the PLAY button.
• For many interactive DVDs and video CDs with playback
control, a menu screen appears. In this case use the
procedure in step 5 to select the desired item.
* Interactive DVDs are DVDs including multiple angles,
stories, etc.
* The specified disc can be played by pressing the Disc
Number button.
Main unit
Example: For DVDs with menu
screens
TITLE MENU
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Remote control unit
Example: For video CDs with
playback control
1. Opening
2. 1st movement
3. 2nd movement
4. 3rd movement
5. Ending
21
ENGLISH
SLOW/SEARCH
- SKIP 8
CONTROL
9
6
7
STOP STILL/PAUSE PLAY
3
2
1
MENU
TITLE
5,6
SELECT
DISPLAY
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
3
4
5
CALL
SELECT
5
6
Use the cursor buttons (•, ª, 0 and 1) to select the desired
item.
• For some discs there is a second menu screen. If so,
press the 9 button to display the next menu screen.
(See the disc’s jacket.)
* The cursor buttons (•, ª, 0 and 1) do not work for video
CDs. Use the number buttons to select the desired item.
Remote control unit
Example: When “Apple” is selected
TITLE MENU
Press the SELECT button.
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the
TITLE/MENU/RETURN button while the DVD is playing,
though this depends on the disc.
• Press the RETURN button during playback of a video CD
to return to the menu screen.
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Apple
SELECT
Remote control unit
NOTES:
• If the OPEN/CLOSE (5) button is pressed while a disc is playing,
playback continues, but the drawer opens and four discs can be
replaced. The disc that can be replaced switches when the DISC
SKIP button is pressed
Press the OPEN/CLOSE (5) button again to close the drawer.
• If
appears on the TV screen while buttons are being operated,
that operation is not possible on the DVM-3700 or with that disc.
22
• Set the disc in the disc guide.
• Do not place more than one disc in the disc tray.
• The disc keeps turning while the menu screen is displayed on the
TV screen.
• Always press the STOP button if you do not want to keep playing
the disc.
ENGLISH
SKIP buttons
PLAY button
STOP button
POWER FL DISPLAY
B
PCM AUDIO TECHNOLOGY / DVD VIDEO AUTO CHANGER
HDCD
DVM-3700
PLAY
STILL / PAUSE
STOP
¢ ON / STANDBY
V.S.S.
OPEN/CLOSE
1
2
3
4
5
6
7
9
0
10
OPEN / CLOSE
AL24
POWER
£ OFF
CONTROL
RANDOM
REPEAT
DISC SKIP
SKIP
SLOW / SEARCH
DISC 1
Number
buttons
DISC 2
REMOTE SENSOR
PHONES LEVEL
DISC 3
8
CLEAR
DISC 4
MIN
MAX
5 DVD Video Automatic Disc Loading System
PHONES
DISC 5
SKIP buttons
SLOW/SEARCH
- SKIP 8
CONTROL
9
6
3
2
STOP button
7
1
MENU
TITLE
SELECT
DISPLAY
Disc number buttons
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
4
5
CALL
3
SET UP
SLOW/SEARCH buttons
STOP STILL/PAUSE PLAY
PLAY button
STILL/PAUSE button
Cursor buttons/SELECT
button
RETURN button
REPEAT A-B REPEAT RANDOM
B
REMOTE CONTROL UNIT RC-542
(2) Stopping Playback
During playback, press the STOP button.
RESUME function
The player records the point where STOP was pressed during play (RESUME
function). (“1” flashes on the player‘s FL display when this function is activated.)
• Press PLAY again while “1” flashes, and play will resume from this point.
• When the tray is opened or STOP is pressed again while “1” flashes, the
RESUME function will be cleared.
The RESUME function works only with titles for which the elapsed playing time
appears on the player‘s FL display during playback.
This feature will not be cleared when the player is set to the standby mode and
then turned back ON.
Chapter preview function (DVD only)
When PLAY is pressed while “1”
flashes, the message shown at right is
displayed.
STOP
Main unit
Press PLAY to Chapter Preview
When PLAY is pressed again while the above message is displayed, the first few
seconds of each chapter from the beginning of the title up to the point where
operation was stopped will be played. This makes it possible to review previously
viewed chapters. Normal playback will commence from the point where operation
was stopped.
STOP
2
Remote control unit
*
The resume play memory function only works for discs
for which the elapsed time is shown on the display
during playback.
NOTES:
• Cancelling the RESUME function will also clear the chapter preview function.
• The chapter preview function may not work with some DVDs.
• After 30 minutes in the stop mode, the DVM-3700’s power automatically turns
off and the standby mode is set. (Auto Power Off)
• If you do not want to continue playing the disc, to save electricity either press
the POWER button on the main to turn the power off or press the POWER
button on the remote control unit to set the power to the standby mode.
23
ENGLISH
(3) Selecting the disc
DISC 1
DISC 2
DISC SKIP
1
2
3
4
5
DISC 3
1
Press the button for the number of the desired disc (1 to 5).
DISC 4
DISC 5
Main unit
2
Remote control unit
1
2
3
4
5
6
7
8
9
0
10
Press the number of the desired chapter or track (0 to 10 and ≥10 button).
CLEAR
Remote control unit
(4) Selecting DISC SKIP
DISC SKIP
1
2
3
4
5
DISC SKIP
Press the DISC SKIP button.
• The carousel in the dreamer turns and the disc on the next tray is played.
• For example, if disc number 3 was playing, the disc switch to disc number 4,
and if disc number 5 was playing, the disc switches to disc number 1.
Main unit
Remote control unit
(5) Playing Still Pictures (Pausing)
STILL / PAUSE
STILL/PAUSE
3
During playback, press the STILL/PAUSE button.
• Press the PLAY button to resume normal playback.
Main unit
Remote control unit
(6) Forward/Reverse Searching
SLOW / SEARCH
SLOW/SEARCH
6
During playback, press one of the SLOW/SEARCH buttons.
6 : Reverse direction
7 : Forward direction
• When pressed again, the search speed increases (in five steps).
• Press the PLAY button to resume normal playback.
24
Main unit
7
Remote control unit
NOTE:
• In some cases the menu screen may reappear when
one of the SLOW/SEARCH buttons is pressed during
menu playback on a video CD.
ENGLISH
(7) Skipping to the Beginning of Chapters or Tracks
During playback, press one of the skip buttons.
8 : Reverse direction
9 : Forward direction
• A number of chapters or tracks equal to the number of times the button is
pressed is skipped.
• When the skip back button is pressed once, the pickup returns to the beginning
of the currently playing chapter or track.
- SKIP -
SKIP
8
Main unit
9
Remote control unit
Playing position
Chapter/Track
Chapter/Track
Chapter/Track
Chapter/Track
Reverse direction , / Forward direction (direction of playback)
NOTE:
• In some cases the menu screen may reappear when
one of the SKIP buttons is pressed during menu
playback on a video CD.
(8) Playing Frame by Frame (for DVDs and video CDs only)
STILL/PAUSE
STILL / PAUSE
3
During playback, press the STILL/PAUSE button.
• The picture moves forward one frame each time the button is pressed.
• Press the PLAY button to resume normal playback.
Main unit
Remote control unit
(9) Slow Playback (for DVDs and video CDs only)
SLOW/SEARCH
SLOW / SEARCH
6
In the still mode, press one of the SLOW/SEARCH buttons.
6 : Reverse direction
7 : Forward direction
• When pressed again, the slow play speed increases (in five steps).
• Press the PLAY button to resume normal playback.
7
Remote control unit
Main unit
NOTE:
• Reverse slow play is not possible on video CDs.
(10) Playing Video CDs with Playback Control
Playing Video CDs with Playback Control Without Using the Menu Playback Function
STOP
STOP
2
1
Press the STOP button while the video CD’s menu screen is displayed.
• The display switches from “PBC” to the time display.
Main unit
2
Use the number buttons to input the desired track number.
• To play the disc without using the menu playback function
• Refer to the disc’s jacket, etc., for the track numbers.
• To start playback from the beginning of the disc, press number button
“1”.
• Returning to menu playback
• Press the STOP button to stop playback, then press the MENU button.
(“PBC” appears on the display window and the menu screen appears
on the TV.) Now perform step 6 on page 22.
Remote control unit
1
2
3
4
5
6
7
8
9
0
10
CLEAR
Remote control unit
25
ENGLISH
9 USING THE GUI SCREENS
2 Use this function to display and change information on the disc (titles, chapters, time, audio, subtitles, angles, etc.) and on the player (repeat,
play mode, markers, etc.).
CONTROL
STOP STILL/PAUSE PLAY
3
2
1
MENU
TITLE
2,3
SELECT
DISPLAY
1
SUBTITLE
RETURN
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
3
4
5
CALL
In the play or stop mode, press the DISPLAY button.
• The GUI (Graphical User Interface) screen appears.
• The picture on the TV screen switches each time the button is pressed.
• The items displayed differ from disc to disc.
DISPLAY
For DVDs
Remote control unit
• Normal playback screen
• Disc information screen
1
1
1:56:37
LPCM
1 ENG 48k 16b
ON
ENG
1
• Player information screen
AB
N
OFF
2
• Shuttle screen
–100
+100
For Video CD
• Normal playback screen
1
• Disc information screen
1
3:37
PBC
L R
OFF
• Player information screen
AB
N
• Shuttle screen
–40
+40
For CD
• Normal playback screen
• Disc information screen
1
3:37
• Player information screen
AB
• Shuttle screen
–50
26
+50
ENGLISH
2
Use the 0 and 1 cursor buttons to select the item you wish to change.
• The selected item is displayed with a yellow frame.
Remote control unit
3
Use the • and ª cursor buttons to change the item.
• Some changes are effective immediately, while some changes are only
made after the SELECT or PLAY button is pressed. Also, some
functions may not work from the stopped GUI screen.
• Numbers (for titles, etc.) can be changed using the number buttons.
When this is done, press the SELECT button to make the change
effective.
SELECT
Remote control unit
Description of Icons Displayed on the TV Screen (Disc Information Screen)
2 For DVDs
Title No.
Change the title No. by using the cursor buttons (•, ª) or the numeric buttons and press SELECT.
Chapter No.
Change the chapter No. by using the cursor buttons (•, ª) or the numeric buttons and press SELECT.
Change the time by using the numeric buttons and press SELECT.
Example: To specify “1 hour 56 min. 37 sec.”, enter “15637”.
(This function does not work with some discs.)
Elapsed playing time
(hour: minute: second)
Angle No.
1
1
LPCM
1 ENG 48k 16b
1:56:37
Audio soundtrack
language No.
Change the No. by using the cursor
buttons (•, ª) or the numeric buttons.
Audio soundtrack
language
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
SVE:
NOR:
DAN:
LPCM
Audio
attribute
DTS
Vocal
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
16b
96k
or
48k
20b
24b
POR:
RUS:
JPN:
CHI:
KOR:
MAL:
VIE:
THA:
*:
Portuguese
Russian
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Others
Linear PCM
(“k” stands for kHz
and “b” stands for
bit.)
1 ~ 5.1ch
Dolby Digital (AC-3)
1 ~ 5.1ch
DTS
– – – (OFF)
DVD karaoke
(Solo)
ON
– – – (OFF)
Vocal
Change the No. by using the cursor buttons (•, ª) or the numeric
buttons.
V1 + V2
V1
DVD karaoke
(Duet)
ON
1 ENG
1
Subtitle language
No.
Change the No. by using the cursor
buttons (•, ª) or the numeric buttons.
Subtitle language
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
SVE:
NOR:
DAN:
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
POR:
RUS:
JPN:
CHI:
KOR:
MAL:
VIE:
THA:
*:
Portuguese
Russian
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Others
Select “ON” or “OFF” by using the
cursor buttons (•, ª).
Subtitle on/off
OFF
Subtitle is cleared.
ON
Subtitle is displayed.
NOTE:
• “ • ª ” around the icon means
that the item can be changed
using the cursor buttons (•, ª).
1
V2
27
ENGLISH
2 For video and music CDs
Track No.
Change the title No. by using the cursor buttons (•, ª)
or the numeric buttons and press SELECT.
•
(minute: second)
During CD play, display is changed by using the cursor buttons (•, ª).
Elapsed playing time
Remaining time of the track
•
Remaining time of the disc
•
Elapsed playing time
Playback control
(Video CD only)
1
3:37
L R
OFF
Menu play is not ON.
ON
Menu play is ON.
PBC
OFF
Change the mode by using the cursor buttons (•, ª) .
Audio mode
LR
Left channel sound is output from the speaker (L), and
right channel sound from the speaker (R).
(Video CD only)
L
Left channel sound only is output.
R
Right channel sound only is output.
NOTES:
• Track No. and the elapsed playing time are not displayed during menu play of Video CDs with playback control.
• It is not possible to turn playback control ON or OFF using the On-Screen Menu Icons.
• “•• ª” around the icon means that the item can be changed using the cursor buttons (•, ª).
28
1
ENGLISH
Description of Icons Displayed on the TV Screen (Player Information Screen)
Markers
Press SELECT during play and press SELECT again at the preferred point to store a marker. (Marker no. is displayed instead of “*”.)
• To recall a marker, select the preferred marker no. by using the cursor buttons (0, 1) and enter the selection using the cursor button (•).
• To clear a marker, select the preferred marker no. using the cursor buttons (0, 1) and press CLEAR.
N
OFF
Select the preferred mode during
play by using the cursor buttons
(•, ª).
• DVD
Dialogue
Enhancer
OFF
OFF
Normal volume
ON
Louder volume
2
Virtual
Surround
Sound (V.S.S.)
(DVD only)
Select the preferred mode during
play by using the cursor buttons (•,
ª).
OFF
V.S.S. off
1
V.S.S. natural effect
2
V.S.S. emphasized effect
Select the preferred mode by using the cursor buttons (•, ª) and press SELECT.
N
Normal mode
F
Fine mode
S
Soft mode
C
Cinema mode
Digital
Cinema
Mode
(DVD/Video
CD only)
User selection mode (Adjust the picture quality as you like.)
When “U” is selected and SELECT is pressed, the On-Screen Menu Icon as shown below appears.
0
U
Contrast (+7 to –7)
0
Contrast hue (+7 to –7)
0
Equalizer (+1/0/–1)
0
Brightness (0 to 15)
Select the preferred item by using the cursor buttons (0, 1) and select the preferred value by using the cursor buttons (•, ª).
NOTES:
• Marker functions do not work with an interactive DVD or during menu play of a Video CD with playback control.
• It is not possible to change the play mode using the On-Screen Menu Icons.
29
ENGLISH
Description of Icons Displayed on the TV Screen (Shuttle Screen)
Still/Pause
Slow-motion play
(Backward)
Press the cursor button (•).
Slow-motion play
Press the cursor button (0).
(DVD only)
(Forward)
–100
Rapid reverse
Press the cursor button (1).
(DVD/Video CD only)
+100
Rapid advance
Press the cursor button (0).
Play
Press the cursor button (1).
Press the cursor button (ª).
NOTES:
• Each time the cursor button (0, 1) is pressed, the speed of rapid reverse/advance and slow-motion play increases up to 5 steps.
• The figures appearing at both ends of the shuttle screen stand for the maximum speeds of rapid reverse and rapid advance.
(DVD: +100/–100, Video CD: +40/–40, CD: +50/–50)
30
ENGLISH
10 MARKING SCENES YOU WANT TO SEE AGAIN
2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want.
Setting Marks
3
2
1
MENU
TITLE
2
SELECT
DISPLAY
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
1
MARKER
1
During playback, press the MARKER button.
• The marker screen appears.
• “*” is displayed if the mark is not set.
Remote control unit
2
Press the SELECT button at the scene you want to mark.
• A number is displayed.
• Up to five marks can be set.
• If the SELECT button is pressed at a position at which a number is
displayed, the previously marked scene is unmarked and the new scene
is marked.
SELECT
Remote control unit
NOTES:
• In some cases, subtitles may not be displayed at marked spots.
• The marking function cannot be used for DVDs and video CDs for which the elapsed time is not shown on the display during playback.
• The marks are retained until the power is turned off or the disc is ejected.
• The mark settings will be cleared when changing from the specified disc to a disc of a different disc number, or when the power is set to
the standby mode.
Calling Out Marked Scenes and Clearing Marks
1
1
SELECT
DISPLAY
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
3
4
5
CALL
1
Remote control unit
1
Use the 0 and 1 cursor buttons to select the mark number.
• If the marker screen is not displayed during playback, press the
MARKER button to display it.
* To play from the selected mark number:
Press the • cursor button.
The disc returns to the selected mark and playback starts.
* Clearing the selected mark number:
Press the CLEAR button.
The selected mark is cleared.
31
ENGLISH
11 PLAYING REPEATEDLY
2 Use this function to play your favorite audio or video sections repeatedly.
Playing Repeatedly (Repeat Playback)
SELECT
1
B
DISPLAY
PCM AUDIO TECHNOLOGY / DVD VIDEO AUTO CHANGER
HDCD
AL24
RANDOM
REPEAT
DVM-3700
PLAY
STILL / PAUSE
STOP
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
4
5
CALL
OPEN / CLOSE
POWER
¢ ON / STANDBY
£ OFF
CONTROL
DISC SKIP
SKIP
SLOW / SEARCH
DISC 1
3
DISC 2
REMOTE SENSOR
PHONES LEVEL
DISC 3
SET UP
REPEAT A-B REPEAT RANDOM
DISC 4
MIN
MAX
5 DVD Video Automatic Disc Loading System
PHONES
B
DISC 5
1
REMOTE CONTROL UNIT RC-542
During playback, press the REPEAT button.
q For DVDs (When the display’s DVD indicator is lit)
Normal playback
•
•
Chapter repeated (During playback only)
•
Title repeated
(During playback only)
•
All disc repeated
REPEAT
•
DVD only disc repeated
•
Repeat playback canceled
1
w For video and music CDs (When the display’s VIDEO CD or CD
indicator is lit)
Main unit
REPEAT
Normal playback
•
•
Track repeated
(During playback only)
Remote control unit
•
1 disc repeated
(During playback only)
•
All disc repeated
•
CD only all disc repeated
•
Repeat playback canceled
* To return to normal playback:
Press the REPEAT button until the display’s “REPEAT” indicator turns off to return to the normal play mode.
NOTES:
• If neither the DVD, the VIDEO CD nor the CD indicator is lit, the mode switches in the following order each time the REPEAT button is
pressed:
Normal play back / All disc repeated / DVD only all disc repeated / CD only all disc repeated / Repeat playback canceled
• Repeat play may not work correctly with some DVDs.
• Repeat play does not work with an interactive DVD or during menu play of a Video CD with playback control.
32
ENGLISH
Playing a Certain Section Repeatedly (A-B Repeat Playback)
DISPLAY
RETURN
SUBTITLE
AUDIO
ANGLE
MARKER
DISC SKIP
1
2
PROG/DIRECT
4
5
CALL
3
SET UP
REPEAT A-B REPEAT RANDOM
B
1
REMOTE CONTROL UNIT RC-542
1
During playback, press the A-B button.
• This sets start point A.
2
Press the A-B button again.
• This sets end point B, and repeat playback of the A-B section starts.
* To return to normal playback:
Press the A-B REPEAT button until the display’s “REPEAT” indicator turns off.
NOTES:
• A-B repeat play does not work with an interactive DVD.
• Some subtitles recorded around point A or B may fail to appear. [DVD]
• A-B repeat play works only within a title [DVD] or a track [Video CD/CD].
2 Setting the Repeat Play Mode During Programmed Playback
REPEAT
When the REPEAT button is pressed during programmed playback, repeat playback of the entire program starts and the
indicator
lights. Press the REPEAT button until the display’s REPEAT indicator turns off to return to normal programmed playback.
33
ENGLISH
12 PLAYING TRACKS IN THE DESIRED ORDER
2 Use this function with video and music CDs to play the tracks in the desired order. (This function will not work for DVDs.)
2 Up to 32 tracks can be set in a program.
34
ENGLISH
NOTES:
• The programmed track numbers on the disc of the displayed disc number appear lit on the music calendar.
• Programming is not possible for DVDs.
• The PROG/DIRECT button does not function when DVDs are loaded in all five trays.
• The PROG/DIRECT button does not function during normal playback or programmed playback.
• The PROG/DIRECT button does not function when the tray is open and neither the DVD, the VIDEO CD nor the CD indicator is lit.
• When the PROG/DIRECT button is pressed in the all disc repeat or CD all disc repeat mode, the all programmed repeat mode is set.
13 PLAYING THE TRACKS IN RANDOM ORDER
2 Use this function with video and music CDs to play the tracks in random order. (This function will not work for DVDs.)
RANDOM
RANDOM
1
In the stop mode, press the RANDOM button.
• The display’s RANDOM indicator lights.
Main unit
Remote control unit
PLAY
2
Press the PLAY button.
• The tracks start playing in random order.
Main unit
Remote control unit
* When random playback ends:
The stop mode is set and the random play screen reappears.
* To return to normal playback:
Press the STOP button to stop random playback, then press the RANDOM button.
* To set the disc sequential random play mode:
Press the RANDOM button and specify the disc numbers (1 to 5) with the DISC SKIP button and the number buttons. A press of the PLAY
(1 PLAY) button will result in the player randomly selecting and playing tracks on the disc in the order of specified discs.
Up to 5 discs can be selected, and the same disc can be selected, two or more times. Disc sequential random play is cancelled when play
ends.
* To set the program random play mode:
After pressing the PROG/DIRECT button and inputting a program (See item ⁄2 on page 34), press the Random button, then the Play
button. The microcomputer will then select tracks from the program at random and play them.
NOTES:
• The RANDOM button does not function in the play mode.
• The RANDOM button does not function when DVDs are loaded in all five trays.
• The RANDOM button does not function when the tray is open and neither the DVD, the VIDEO CD nor the CD indicator is lit.
• When the RANDOM button is pressed in the all disc repeat or CD all disc repeat mode, the random all repeat mode is set.
REPEAT
RANDOM
will appear lit on the display at this time.
35
ENGLISH
14 100 CD CHANGER CONTROL FUNCTION
2 A separately sold 100 CD changer (DCM-5000/5001) can be connected to the DVM-3700 and operated from the DVM-3700.
DVM-3700
1
Connect the DVM-3700’s CONTROL OUT connector to the REMOTE
CONTROL IN connector on the 100 CD changer (DCM-5000/5001).
• Use a commercially available mini-plug cord (monaural).
DCM-5000/5001
CONTROL
2
Press the CONTROL button.
• “CONTROL” appears on the display.
Main unit
3
CONTROL
Remote control unit
Press the buttons on the DVM-3700 or the remote control unit.
• When one of the buttons on the DVM-3700 or the remote control unit shown on the table below is pressed, the DCM-5000/5001
operates in the same way as when the corresponding button on the DCM-5000/5001 is pressed.
DVM-3700
DCM-5000/5001
PLAY
PLAY
STILE / PAUSE
PAUSE
STOP
STOP
8,9
8,9
DISC SKIP
DISC SKIP +
SELECT
ENTER
0~9
0~9
•,ª,0,1
c , d , [, \
NOTES:
• Wait at least 15 seconds after turning on the power of the 100 CD changer (DCM-5000/5001) before performing this operation.
• Buttons not indicated on the above table do not operate.
36
ENGLISH
15 USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS
Switching the Audio Language (Multiple Audio Function)
2 With DVDs containing multiple audio language signals, the audio language can be switched during playback.
AUDIO
1
During playback, press the AUDIO button.
• The current audio language number is displayed.
• If no sound is recorded on the disc, “– –” is displayed.
Remote control unit
3
2
Use the • and ª cursor buttons to select the desired language.
• The display turns off when the AUDIO or SELECT button is pressed.
FRA
Bonjour
Remote control unit
NOTES:
• If the desired language is not set after pressing the • and ª cursor buttons several times, the disc does not include that language.
• The audio language set with the default settings (see page 45) is set when the power is turned on and when the disc is replaced. If that
language is not included on the disc, the disc’s default language is set.
37
ENGLISH
Switching vocals ON or OFF for Karaoke discs (DVD/Video CD)
AUDIO
1
Press AUDIO during play.
1
Vocal
ON
1
Vocal
---
Remote control unit
Press the cursor buttons ( • , ª , 0, 1) until the preferred setting is
selected.
• DVD Karaoke (Solo) (0, 1)
1 ON
(OFF) 0
• DVD Karaoke (Duet) (0, 1)
2
1 1+2
(OFF)
(ON)
SELECT
1
V1 (ON)
1
V2 (ON)
•
L R
• Video CD (•, ª)
LR
•
1
L
1R
Press AUDIO or SELECT to clear the display
NOTES:
• This operation does not work with CDs.
• The vocals from the digital audio output connector cannot be switched by this operation.
38
Remote control unit
ENGLISH
Switching the Subtitle Language (Multiple Subtitle Function)
2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback.
SUBTITLE
1
ON
1 ENG
During playback, press the SUBTITLE button.
• The current subtitle language number is displayed.
• If no subtitles are recorded on the disc, “– –” is displayed.
Remote control unit
I love you
3 FRA
2
Use the • and ª cursor buttons to select the desired language.
• The display turns off when the SUBTITLE or SELECT button is pressed.
• Use the 0 and 1 cursor buttons to turn the subtitles “ON” and “OFF”.
Remote control unit
Je táime
NOTES:
• If the desired language is not set after pressing the • and ª cursor buttons several times, the disc does not include that language.
• The subtitle language set with the default settings (see page 45) is set when the power is turned on and when the disc is replaced. If that
language is not included on the disc, the disc’s default language is set.
• When the subtitle language is changed, several seconds may be required for the new language to appear.
• When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap each other on the TV monitor. In this
case, turn the subtitle off.
39
ENGLISH
Switching the Angle (Multiple Angle Function)
2 With DVDs containing multiple angle signals, the angle can be switched during playback.
ANGLE
1
1
During playback, press the ANGLE button.
• The current angle number is displayed.
Remote control unit
3
2
Use the • and ª cursor buttons or the number buttons to select the
desired angle.
• The display turns off when the ANGLE or SELECT button is pressed.
Remote control unit
NOTES:
• The multiple angle function only works with discs on which multiple angles are recorded.
• At scenes where multiple angles are recorded, the angle can be switched.
• Even at scenes where multiple angles are not recorded, the angle number can be preset. In this case the angle switches to the preset
angle once a scene at which multiple angles are recorded is reached.
40
ENGLISH
Reproducing an Advanced Virtual Surround Sound effect [ Dolby Digital (AC-3) DVD ]
2 This player can reproduce a virtual surround sound effect which provides sound as if heard from the front speakers located at the horizontally
further position or heard from nonexistent speakers even when only a 2-channel stereo system is connected [for playback of Dolby Digital
DVD software (2ch and above) only].
Press V.S.S. during play.
Each time this button is pressed, the player‘s FL display changes:
Virtual surround sound is cancelled
V.S.S.
1
Virtual surround sound 1 (Natural effect)
Remote control unit
Virtual surround sound 2 (Emphasized effect)
NOTES:
• The virtual surround sound effect does not work with DVD Karaoke discs.
• The virtual surround sound effect may not work with some Dolby Digital 2.1ch or 3.1ch DVDs. Additionally, this effect may not work
properly with some Dolby Digital DVDs other than 2.1ch or 3.1ch, depending on the software.
• Turn off the TV surround sound and other surround sound effects when using this virtual surround sound effect.
41
ENGLISH
16 USING THE MENUS
Using the Title Menu
2 For DVDs containing multiple titles, the desired title can be selected and played from the title menu.
Example:
TITLE
1
TITLE MENU
During playback, press the TITLE button.
• The title menu appears.
• If the TITLE button is pressed again, the disc returns to the point at
which the title menu was called out and playback resumes from that
point.
Remote control unit
Apple
Banana
Orange
Apple
Peach
Pineapple
Example: When “Orange” is selected
TITLE MENU
2
Use the cursor or number buttons to select the desired title.
• If you select the title number using the number buttons, skip step 3
below.
SELECT
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Remote control unit
SELECT
3
Press the SELECT button.
• Playback starts.
• Playback also starts if the PLAY button is pressed.
Remote control unit
42
ENGLISH
Using the DVD Menu
2 Some DVDs include special menus called DVD menus.
For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle
language menus.
These menus are called “DVD menus”.
Here we describe the general procedure for using DVD menus.
Example:
MENU
1
DVD MENU
During playback, press the MENU button.
• The DVD menu appears.
• If the MENU button is pressed again, the disc returns to the point at
which the DVD menu was called out and playback resumes from that
point.
1. SUB TITLE
2. AUDIO
3. ANGLE
Remote control unit
Example: When “AUDIO” is selected
DVD MENU
2
Use the • or ª cursor buttons or the number buttons to select the desired
item.
• If you select the item using the number buttons, skip step 3 below.
1. SUB TITLE
2. AUDIO
3. ANGLE
Remote control unit
SELECT
3
Press the SELECT button.
• The selected item is set.
• If more menus appear, repeat steps 2 and 3.
Remote control unit
43
ENGLISH
17 CHANGING THE DEFAULT SETTINGS
2 The default values preset upon shipment from the factory can be changed.
The default settings are retained until they are again changed, even if the power is turned off.
1
In the stop mode, press the SET UP button.
• The default setting screen appears.
1. Disc Languages
Use this to set the language to be used when playing the disc.
If the set language is not offered on that disc, the disc’s default
language is set.
2. Ratings
Use this to disable playback of adult DVDs so that children cannot
watch them. Note that playback of adult DVDs cannot be disabled if the
rating level is not recorded on the DVD, but that it is possible to disable
playback of all DVDs.
3. Menu Language
Use this to set the language for the default setting screen and
messages displayed on the TV screen (“PLAY”, etc.).
4. On-Screen Messages
Use this to set whether or not to display messages (“PLAY”, etc.) on
the TV screen.
5. FL Display
Use this to set the brightness of the display.
6. TV Aspect
Set this according to the size of the connected TV’s screen (4:3 or 16:9).
7. Digital Audio Output
Use this to set the audio signals output from the digital audio output
connectors.
9. Other Settings
These include special settings such as audio dynamic range
compression.
SET UP
Remote control unit
1 Disc Languages
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
Level 8
English
Bright
4:3
9 Other Settings
0 Exit
Use the • and ª cursor buttons to select the desired setting, then press
the SELECT button.
2
•
•
•
•
•
•
•
•
Select “1 Disc Languages”.
Select “2 Ratings”.
Select “3 Menu Language”.
Select “4 On-Screen Messages”.
Select “5 FL Display”.
Select “6 TV Aspect”.
Select “7 Digital Audio Output”.
Select “9 Other Settings”.
(See page 45.)
(See pages 46, 47 and 48.)
(See page 49.)
(See page 50.)
(See page 52.)
(See page 53, 54 and 55.)
(See pages 56 and 57.)
(See pages 58 and 59.)
Remote control unit
SELECT
Remote control unit
NOTE:
• When the player is set to the “Lock All” setting in “2 Ratings”, none of the initial setting, including “2 Rating”, can be changed if the DVD
disc is left inside the player. In this case, remove the disc, and then operate the player.
44
ENGLISH
When “1 Disc Languages” is Selected
1
2
See page 44.
SELECT
3
4
Use the • and ª cursor buttons to select the desired setting, then press
the SELECT button.
1. Audio
Use this to set the language of the sound output from the speakers.
2. Subtitle
Use this to set the language of the subtitles displayed on the TV.
3. Menus
Use this to set the language of the title menus (menus recorded on the
disc), etc.
Use the • and ª cursor buttons to select the desired setting, then press
the SELECT button.
q When “1 Audio” is selected:
1. English (Factory default)
Select this to play the sound in English.
2. French
Select this to play the sound in French.
3. Spanish
Select this to play the sound in Spanish.
4. Original
Select this to play the disc’s original sound.
5. Other * * * *
Select this to play the disc with a language other than the ones above.
Use the number buttons to input the 4-digit language number shown on
page 60.
w When “2 Subtitle” is selected:
1. Automatic (Factory default)
The subtitle language is automatically set to the same language as the
audio language.
• When the disc is played with the audio language set for the “1
Audio” setting, the subtitles are not displayed.
• When the disc is played with an audio language other than the one
set for the “1 Audio” setting, the subtitles are displayed in the
language set for the “1 Audio” setting.
2. English
Select this to play the disc with English subtitles.
3. French
Select this to play the disc with French subtitles.
4. Spanish
Select this to play the disc with Spanish subtitles.
5. Other * * * *
Select this to play the disc with subtitles in a language other than the
ones above. Use the number buttons to input the 4-digit language
number shown on page 60.
Remote control unit
Disc Languages
1
Audio
English
2
Subtitle
Automatic
3
Menus
English
0
Exit
Remote control unit
SELECT
Remote control unit
45
ENGLISH
4
e When “3 Menus” is selected:
1. English (Factory default)
Select this to display the menus in English.
2. French
Select this to display the menus in French.
3. Spanish
Select this to display the menus in Spanish.
5. Other * * * *
Select this to display the menus in a language other than the ones
above. Use the number buttons to input the 4-digit language number
shown on page 60.
Disc Languages
5
1
Audio
English
2
Subtitle
Automatic
3
Menus
English
0
Exit
The settings are completed, and the screen in step 3 reappears.
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
When “2 Ratings” is Selected
1. When playback is not restricted (Level 8)
1
2
See page 44.
3
Use the • and ª cursor buttons to select “2 Ratings”, then press the
SELECT button.
Level 8 (Factory default)
Select this to play all DVDs.
Level 7 to Level 2
Select this to play DVDs for general audiences and children. Adult DVDs
cannot be played.
Level 1
Select this to play only DVDs for children. (Adult and general audience
DVDs cannot be played.)
Level 0
Select this to disable playback of all DVDs.
Use this for example to disable playback of adult DVDs on which the
rating level is not recorded.
SELECT
46
Remote control unit
Please set a rating limit
8 No Limit
7
6
5
4
3
2
1
0 Lock All
Press RETURN to cancel
ENGLISH
SELECT
Remote control unit
4
If a rating of Level 7 or lower has been selected, use the number buttons
to input a 4-digit password, then press the SELECT button.
* Do not forget the password.
* Once locked, the setting cannot be changed without inputting the
correct password.
Example: When “Level 7” is selected
Ratings
Enter a 4-digit password,
then press SELECT
Press RETURN to cancel
Ratings
The player is locked.
Remember the password.
5
Press the SELECT button.
4343
Press SELECT to contine
6
The settings are completed, and the screen in step 1 on page 44
reappears.
1 Disc Languages
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
Level 7
English
Bright
4:3
9 Other Settings
0 Exit
* To return to the previous menu screen:
Press the RETURN button. (The RETURN button will not function after the SELECT button is pressed in step 5.)
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
47
ENGLISH
2. When playback is restricted (Level 0 to 7)
1
2
See page 44.
SELECT
Remote control unit
3
Use the number buttons to input the correct password, then press the
SELECT button.
Ratings
Enter your 4-digit password,
then press SELECT.
Press RETURN to cancel
4
q To cancel the restriction (unlock the player):
• Press number button “1”, then press the SELECT button.
The screen in step 1 on page 44 reappears.
w To change the password:
• Press number button “2”.
• Use the number buttons to input the new password, then press the
SELECT button.
• Press the SELECT button.
The screen in step 1 on page 44 reappears.
e To change the rating level:
• Press number button “3”.
• Use the • and ª cursor buttons or the number buttons to select the
desired level, then press the SELECT button.
The screen in step 1 on page 44 reappears.
r To temporarily cancel the restriction (unlock the player):
• Press number button “4”.
• Press the SELECT button.
The screen in step 1 on page 44 reappears.
• The temporary unlock setting will be in effect until the power is
switched OFF or set to STANDBY, as well as until the change is
made to the disc that will be played.
t To exit without changing the rating level:
• Press number button “0”.
The screen in step 1 on page 44 reappears.
SELECT
Remote control unit
Ratings
1 Unlock Player
2 Change Password
3 Change Level
4 Temporary Unlock
0 Exit
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
NOTE:
• Some discs may not be encoded with specific rating level information though its disc jacket says that it is for “adults”.
For those discs, the age restriction will not work.
48
ENGLISH
When “3 Menu Language” is Selected
1
2
See page 44.
SELECT
3
Use the • and ª cursor buttons to select “3 Menu Language”, then press
the SELECT button.
1. English (Factory default)
Select this to set the language used for the default setting screen and
the “PLAY” and other messages displayed on the TV screen to English.
2. French
Select this to set the language used for the default setting screen and
the “PLAY” and other messages displayed on the TV screen to French.
3. Spanish
Select this to set the language used for the default setting screen and
the “PLAY” and other messages displayed on the TV screen to
Spanish.
Remote control unit
Select the language
for these Menus.
1 English
2 Français
3 Español
Press RETURN to cancel
4
The settings are completed, and the screen in step 1 on page 44
reappears.
1 Disc Languages
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
Level 8
English
Bright
4:3
9 Other Settings
0 Exit
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
49
ENGLISH
When “4 On-Screen Messages” is Selected
1
2
See page 44.
SELECT
3
Press the cursor buttons ( •,ª ) to select the preferred item and press
SELECT.
1. On-Screen Messages
To select whether “Play”, “Still” and other displays are displayed or
not.
2. Color and Position
To select the color (Blue/Violet/Green) and position (above/slightly
below) of “Play”, “Still” and other displays as well as On-Screen Menu
Icons.
Remote control unit
On-Screen Messages
1 On-Screen Messages On
2 Color and Position
0 Exit
Press the cursor buttons ( •,ª ) to select the preferred setting and press
SELECT.
q When “1 On-Screen Messages” is selected
1. On (Factory default)
“Play”, “Still” and other displays will always appear on the TV screen.
2. Off
“Play”, “Still” and other displays will not appear on the TV screen.
w When “2 Color and Position” is selected
The colors and positions are set as follows:
4
50
1.
Blue (Factory default)
2.
Violet
3.
Green
4.
Blue
5.
Violet
6.
Green
Blue
ENGLISH
5
The settings are completed, and the screen in step 1 on page 44
reappears.
1 Disc Languages
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
Level 8
English
Bright
4:3
9 Other Settings
0 Exit
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
NOTE:
• When
is selected, “Play”, “Still” and other displays as well as On-Screen Menu Icons will be displayed at a little lower position
than the factory setting. It is recommended to choose this setting in such a case that the screen is only partially displayed.
51
ENGLISH
When “5 FL Display” is Selected
1
2
See page 44.
SELECT
3
Use the • and ª cursor buttons to select the desired screen brightness,
then press the SELECT button.
1. Bright (Factory default)
The display indications are always bright.
2. Dim
The display indications are always dim.
3. Dim During DVD/VCD Play (Auto)
The indications on the display window are only dim when playing DVDs
or video CDs, but are temporarily bright during the slow play and search
operations.
Remote control unit
FL Display
1 Bright
2 Dim
3 Dim During DVD/VCD Play (Auto)
Press RETURN to cancel
4
The settings are completed, and the screen in step 1 on page 44
reappears.
1 Disc Languages
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
9 Other Settings
0 Exit
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
52
Level 8
English
Bright
4:3
ENGLISH
When “6 TV Aspect” is Selected
1
2
See page 44.
Use the • and ª cursor buttons to select “6 TV Aspect”, then press the
SELECT button.
q 4:3 (Factory default)
Select this when a conventional size TV
is connected. (Factory preset)
• The video material formatted in the
Pan & Scan style is played back in
that style (the left and right edges
are cut off).
3
• The video material not formatted in
the Pan & Scan style is played back
in the letterbox style (black bands
appear at top and bottom of screen).
* Set the Pan & Scan and letter box
setting at “3 TV Mode” under “9
Other Settings”. (Refer to page 58.)
w 16:9
Select this when a wide-screen
TV is connected.
Played in “FULL” size. (Setting
the wide-screen TV to “FULL”
mode is also necessary.)
* Each screen shows an
example when the video
material for a wide-screen is
played. (This setting does not
affect the video material for
conventional size.)
SELECT
Remote control unit
Select your TV aspect
1
4:3
2
16 : 9
Press RETURN to cancel
Press the cursor buttons ( •,ª ) to select the TV type and press SELECT.
4
q When “4:3” is selected
w When “16:9” is selected
Following TV types can be selected in both cases.
1. Standard (Direct View TV) (Factory default)
Select when a standard TV (Direct view) is connected.
2. CRT Projector
Select when a CRT projector is connected.
3. LCD Projector
Select when a LCD projector is connected.
4. Projection TV
Select when a projection TV is connected.
53
ENGLISH
5
The settings are completed, and the screen in step 1 on page 44
reappears.
1 Disc Languages
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
9 Other Settings
0 Exit
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
54
Level 8
English
Bright
4:3
ENGLISH
• Concerning images which appear on the TV screen (aspect ratios of the screen)
Images which appear on the TV screen differ depending on the type of software and the TV set connected.
TV set connected (Screen mode)
Type of software
4:3
Software for widescreen
(formatted in the
Pan & Scan style)
Screen whose right and
left edges are cut off
Software for widescreen
(not formatted in the
Pan & Scan style)
Letterbox (with black
bands at top and bottom)
Software (4:3)
Software (4:3, Letterbox)
16:9 (“FULL” mode)
16:9 (“ZOOM” mode)
16:9 (“AUTO” mode)
Full screen
Screen whose top and
bottom edges are cut off
Full screen
Full screen
Screen horizontally
enlarged
Screen whose top and
bottom edges are cut off
Full screen (with black
bands at right and left)
Letterbox (with black
bands at top and bottom)
Screen horizontally
enlarged (with black
bands at top and bottom)
Full screen
Screen in which the
picture at the far left and
far right ends only is
extended horizontally
(with black bands at top
and bottom)
• The images which appear on the TV screen, and what each screen mode is called, may differ depending on the manufacturer of the TV set or
on the type of the TV set. Consult the instruction manual provided with your TV set.
For your reference:
• Letterbox
Black bands are inserted at the top and bottom of the screen to fill in the gaps at the top and bottom where the size of the picture is smaller
than the screen.
• Pan & Scan
Part of the wide-screen picture (either at both sides or one side of the screen) is automatically eliminated so that the picture fills the whole
screen.
55
ENGLISH
When “7 Digital Audio Output” is Selected
1
2
See page 44.
3
Use the • and ª cursor buttons to select “7 Digital Audio Output”, then
press the SELECT button.
1. LPCM 96k / 48k
To select whether digital audio converted to 48 kHz/16 bit is output
from the optical/coaxial digital audio output connector or no digital audio
is output during playback of the DVD recorded in Linear PCM of 96 kHz.
(In case of the DVD recorded in Linear PCM of 48 kHz, digital audio
converted to 48 kHz/16 bit is output irrespective of the setting.)
2. Dolby Digital
To select the signal format (Bitstream or PCM) to be output from the
optical/coaxial digital audio output connector during playback of the DVD
recorded in Dolby Digital (AC-3).
3. dts
To select whether DTS bitstream is output from the optical/coaxial
digital audio output connector or no digital audio is output during
playback of the DVD recorded in dts.
SELECT
Remote control unit
Digital Audio Output
1 LPCM 96k
48k No
2 Dolby Digital
Bitstream
3 dts
Off
0 Exit
Use the • and ª cursor buttons to select the desired setting, then press
the SELECT button.
4
q When “1 LPCM 96k / 48k” is selected
1. No (Factory default)
Digital audio of 48 kHz/16 bit is output during playback of the DVD
recorded in Linear PCM of 48 kHz. No digital audio is output during
playback of the DVD recorded in Linear PCM of 96 kHz. However, audio
will be output using the original audio recording system in case of the
DVD which has not been copyright-protected.
2. Yes
During playback of the DVD recorded in Linear PCM of 48 kHz or 96
kHz, digital audio converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit or below for
copyright protection.)
w When “2 Dolby Digital” is selected
1. Bitstream (Factory default) (NOTE 1)
Dolby Digital (AC-3) bitstream (1ch – 5.1ch) is output during playback of
the DVD recorded in the Dolby Digital (AC-3).
Select this setting when the player is connected to the Dolby Digital
(AC-3) decoder.
2. PCM
Digital audio converted to PCM (2ch) of 48 kHz/16 bit is output during
playback of the DVD recorded in the Dolby Digital (AC-3).
56
Remote control unit
SELECT
Remote control unit
ENGLISH
4
e When “3 DTS” is selected
1. Off (Factory default)
No digital audio is output during playback of the DVD recorded in DTS.
2. Bitstream (NOTE 1)
DTS bitstream is output during playback of the DVD recorded in DTS.
Select this setting when the player is connected to the DTS decoder.
Digital Audio Output
1 LPCM 96k
5
The settings are completed, and the screen in step 3 reappears.
48k No
2 Dolby Digital
Bitstream
3 dts
Off
0 Exit
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
• Recommended “Digital Audio Output” settings
The optimum digital output setting depends on the type of component connected to the digital audio output connector.
“7 Digital Audio Output” setting
Digital audio output connector
1 LPCM (96k / 48k)
2 Dolby Digital
3 DTS
When nothing is connected to the digital audio
output connector
1 No (factory default)
1 Bitstream (factory default)
1 Off (factory default)
When an amplifier equipped with a digital input
connector and with no built-in Dolby Digital (AC-3)
decoder is connected to the digital audio output
connector (see page 11)
2 Yes (NOTE 1)
2 PCM (NOTE 2)
1 Off (factory default)
When a Dolby Digital (AC-3) decoder is connected
to the digital audio output connector (see page 12)
2 Yes (NOTE 1)
1 Bitstream (factory default)
1 Off (factory default)
When a Dolby Digital (AC-3) DTS decoder is
connected to the digital audio output connector
2 Yes (NOTE 1)
1 Bitstream (factory default)
2 Bitstream
NOTES:
1. When connecting an amplifier (with an optical/coaxial digital input connector) which does not contain the Dolby Digital (AC-3) or dts decoder,
be sure to select “PCM” at the “2 Dolby Digital” and “Off” at the “3 dts”. If “Bitstream” is selected, any attempt to play DVD may cause
such a high level of noise that it may be harmful to your ears and damage your speakers.
2. Audio output from the player‘s audio output connectors is converted to 48 kHz as well as audio from the digital audio output connector.
To enjoy high quality sound at 96 kHz, connect the amplifier or decoder directly to the audio output connectors, not to the digital audio output
connector. (Select “No” at the “1 LPCM 96k / 48k”.)
57
ENGLISH
When “9 Other Settings” is Selected
1
2
See page 44.
3
Use the • and ª cursor buttons to select “9 Other Settings”, then press
the SELECT button.
1. Still Mode
Use this to reduce fluttering of the picture when playing still pictures.
2. Audio during search
Use this to set whether or not to play the sound during the search
operation in speed 1.
3. TV mode (4:3)
Use this to set the TV screen display when playing wide DVDs on
conventional size TVs.
4. D.Range Compression
Use this to set the range of sound output when playing discs.
5. Still Picture Display
To select whether the picture type (I/P/B) is displayed on the TV screen
in the still picture mode or not.
6. Black Level Control
To select the black level of the picture, “Lighter” or “Darker”.
SELECT
Remote control unit
Other Settings
1 Still Mode
On
3 TV Mode (4:3)
4 D.Range Compression
5 Still picture Display
6 Black Level Control
Pan&Scan
Off
Off
Lighter
0 Exit
Use the • and ª cursor buttons to select the desired setting, then press
the SELECT button.
q When “1 Still Mode” is selected
1. Automatic (Factory default)
Normally set this.
The frame still or field still mode is selected automatically.
2. Field
Select this if the picture flutters when “Automatic” is set.
3. Frame
“Frame still” is always selected.
Select this setting when small text or fine patterns cannot be seen
clearly even when “1 Automatic” is selected.
4
w When “2 Audio during search” is selected
1. On (Factory default)
Select this to output sound during the search operation in speed 1.
2. Off
Select this to turn off the sound during the search operation in speed 1.
e When “3 TV Mode (4:3)” is selected
1. Pan&Scan (factory default)
Select this to play wide DVDs with a pan & scan screen (with the sides
cut off). If pan & scan is not specified for the disc, however, the disc is
played with a letter box screen.
2. Letter box
Select this to play wide DVDs with a letter box screen (with black bands
at the top and bottom).
58
Automatic
2 Audio durig Search
Remote control unit
SELECT
Remote control unit
ENGLISH
r When “4 D.Range Compression” is selected
1. Off (Factory default)
Select this for the standard range.
2. On
Select this to achieve powerful sound even when the volume is low.
This setting is suited for watching DVDs late at night with the volume
low. (This setting is only valid for DVDs recorded in Dolby Digital.)
4
t When “5 Still Picture Display” is selected
1. Off (Factory default)
The picture type (I/P/B) will not be displayed on the TV screen in the still
picture mode.
2. On
The picture type (I/P/B) will be displayed on the TV screen in the still
picture mode.
y When “6 Black Level Control” is selected
1. Lighter (Factory default)
The black level of the picture is selected to the lighter one.
Select this setting normally when the player is connected to a TV set
through the VIDEO OUT connector or S VIDEO OUT connector.
2. Darker
The black level of the picture is selected to the darker one.
Select this setting normally when the player is connected to a TV set
through the COMPONENT VIDEO OUT (Y,Cb, Cr) connector.
Other Settings
5
1 Still Mode
2 Audio durig Search
3 TV Mode (4:3)
4 D.Range Compression
5 Still Picture Display
6 Black Level Control
The settings are completed, and the screen in step 3 reappears.
Automatic
On
Pan&Scan
Off
Off
Lighter
0 Exit
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
For your reference:
• When the “2 On” is selected
at the “5 Still Picture Display”,
the following screen is
displayed in the still picture
mode;
P: P-Picture (Predictive coded picture)
This picture type is computed on the basis of a past I-Picture or
P-Picture.
Example: in the case of the P-Picture
I/P/B:
• The MPEG 2 standard adopted for DVD uses the following 3
picture types for the coding of each picture (frame) on the TV
screen.
I: I-Picture (Intra coded picture)
This is the standard picture type, and each picture is coded
separately. Since it features the best picture quality, it is
recommended that the screen be frozen with I-Picture when the
picture quality is to be adjusted.
B: B-Picture (Bidirectionally-predictive coded picture)
This picture type is computed by comparing the previous and
subsequent I-Picture or P-Picture. It has the lowest volume of
information.
General Picture type
Predict
Predict
59
ENGLISH
Language code list
Code
60
Language
Language
Code
Code
Language
Language
Code
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sundanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Romanian
8679
Volapük
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
ENGLISH
18 TROUBLESHOOTING
Check again before assuming the player is malfunctioning.
2 Are all the connections correct?
2 Are you following the instructions in the manual?
2 Are the amplifier and speakers operating properly?
If the DVM-3700 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVM-3700 may be
damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest DENON sales office.
Check
Symptom
Page
Power does not turn on.
• Plug the power cord securely into the power outlet.
10
Playback does not start when PLAY button
is pressed.
Playback stops immediately.
• Is there condensation on the disc or player? (Let stand for 1 or 2 hours.)
• Discs other than DVDs, video CDs and music CDs cannot be played.
• Disc is dirty. Wipe off the dirt.
—
8
9
Picture does not appear.
• Check the connections.
• Set the TV’s input to “video”.
10
—
Sound is not produced or sound quality is
poor.
• Check the connections.
• Properly set the input of the TV, stereo, etc.
10
—
Menu playback of video CD’s is not
possible.
• Menu playback is not possible with anything but video CDs with playback control.
21
Picture is disturbed during the search
operation.
• Some disturbance is normal.
—
Buttons do not operate.
• Some operations are disabled for some discs.
22
No subtitles are displayed.
• Subtitles are not displayed for DVDs not containing subtitles.
• Subtitles are turned off. Turn the subtitles setting on.
—
39
• The audio (or subtitle) language does not switch for discs which do not include multiple audio (or
subtitle) languages.
• For some discs the audio (or subtitle) language cannot be switched when the operation to switch it is
performed, but can be switched on the menu screens.
—
Audio (or subtitle) language does not switch.
Angle does not switch.
• The angle cannot be switched for DVDs which do not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
Playback does not start when the title is
selected.
• Check the “Ratings” setting.
37, 39
40
46~48
You have forgotten the password you have
set for the “Ratings” setting.
• Use the procedure described below to reset all the settings to the factory defaults.
In the stop mode, press and hold in the PLAY, SKIP (8) and OPEN/CLOSE buttons on the DVD
player for at least 3 seconds. (Check that “Initialized” has turned off from the TV screen.)
—
The disc is not played with the audio or
subtitle language set as the default setting.
• The disc does not play with the selected audio or subtitle language if that audio or subtitle language
is not included on that DVD.
45
Picture is not displayed in 4:3 (or 16:9).
• Set the “TV Aspect” default setting to the proper setting for the connected TV.
53
No messages appear on the screen when
buttons are operated.
• Set the “On-Screen Messages” default setting to “On”.
50
Menu screen messages for the desired
language do not display.
• Check the default setting for the disc language’s menu language.
45
Remote control unit does not operate.
•
•
•
•
•
Check that the batteries are inserted in the proper “<” and “>” directions.
The batteries are dead. Replace them with new batteries.
Point the remote control unit at the remote control sensor when operating it.
Operate the remote control unit within a distance of 7 meters from the remote control sensor.
Remove the obstacle between the remote control unit and remote control sensor.
17
17
17
17
17
61
ENGLISH
19 MAIN SPECIFICATIONS
Signal system:
Applicable discs:
S-Video output:
Video output:
Component output:
Audio output:
Audio output properties:
Digital audio output:
Power supply:
Power consumption:
Maximum external
dimensions:
Weight:
2 Remote control unit:
Type:
Power supply:
NTSC
(1) DVD/video discs
1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer
per side)
1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs (1 layer per
side)
(2) Compact discs (CD-DA, Video CD)
12 cm discs, 8 cm discs
Y output level: 1 Vp-p (75 Ω/ohms)
C output level: 0.286 Vp-p
Output connectors: S connectors, two sets
Output level: 1 Vp-p (75 Ω/ohms)
Output connector: Pin-plug jacks, two sets
Y output level: 1 Vp-p (75 Ω/ohms)
Cb output level: 0.648 Vp-p (75 Ω/ohms) Cr output level: 0.648 Vp-p (75 Ω/ohms)
Output connector: Pin jack, 1 set
Fixed output level: 2 Vrms, 1 set
(1) Frequency response
q DVDs (linear PCM) : 2 Hz to 22 kHz (48 kHz sampling)
: 2 Hz to 44 kHz (96 kHz sampling)
w CDs
: 2 Hz to 20 kHz
(2) S/N ratio
q DVDs
: 115 dB
w CDs
: 115 dB
(3) Total harmonic distortion
q DVDs
: 0.0025%
w CDs
: 0.0030%
(4) Dynamic range
q DVDs
: 108 dB
w CDs
: 100 dB
Optical digital output : Optical connector, 1 set
Coaxial digital output : Pin jack, 1 set
AC 120V, 60 Hz
40 W
434 (width) x 131 (height) x 415 (depth) mm (not including protruding parts)
9.2 kg
RC-542
Infrared pulse
DC 3V, two batteries (“AA” (R6P))
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
* Design and specifications are subject to change without notice in the course of product improvement.
62