Denon DN-C640 CD Player User Manual

NETWORKED CD PLAYER
DN-C640
OPERATING INSTRUCTIONS
IMPORTANT TO SAFETY
WARNING:
To reduce the risk of fire and electric shock,
this apparatus should not be exposed to rain or
moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus
CAUTION
1.Handle the power supply cord carefully
Do not damage or deform the power supply cord.
If it is damaged or deformed, it may cause electric
shock or malfunction when used. When removing
from wall outlet, be sure to remove by holding the
plug attachment and not by pulling the cord.
2.Do not open the rear cover
In order to prevent electric shock, do not open the
top cover.
If problems occur, contact your DENON DEALER.
3.Do not place anything inside
Do not place metal objects or spill liquid inside the
system.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. DN-C640
Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
i
NOTE:
This Networked CD Player uses the semiconductor
laser. To allow you to enjoy music at a stable
operation, it is recommended to use this in a room of
5°C (41°F) ~ 35°C (95°F).
LABELS (for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J APPLICABLE AT DATE OF
MANUFACTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
REFOR-MANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION
(For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this product may not cause harmful interference,
and (2) this product must accept any interference
received, including interference that may cause
undesired operation.
2. IMPORTANT NOTICE:
DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modification not expressly approved by
DENON may void your authority, granted by the FCC,
to use the product.
3. NOTE
This product has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful
interference to radio or television reception, which can
be determined by turning the product OFF and ON, the
user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the product into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute
this type of product or an experienced radio/TV
technician for help.
This Class B apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation
and operation precautions which you should be particularly aware of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacture's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information!
15.
Marked terminals are HAZARDOUS LIVE and that the
external wiring connected to those terminal requires
installation by an instructed person or the use of readymade leads or cords.
16. This product is equipped with a three-wire grounding type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
ii
CAUTION:
PRECAUCIÓN:
To completely disconnect this product from the
mains, disconnect the plug from the wall socket
outlet.
The mains plug is used to completely interrupt
the power supply to the unit and must be within
easy access by the user.
Para desconectar completamente este producto
de la alimentación eléctrica, desconecte el
enchufe del enchufe de la pared.
El enchufe de la alimentación se utiliza para
interrumpir por completo el suministro de
alimentación a la unidad y debe de encontrarse
en un lugar al que el usuario tenga fácil acceso.
VORSICHT:
Um dieses Gerät vollständig von der
Stromversorgung abzutrennen, trennen Sie bitte
den Netzstecker von der Wandsteckdose ab.
Die Hauptstecker werden verwendet, um
die Stromversorgung zum Gerät völlig zu
unterbrechen; er muss für den Benutzer gut und
einfach zu erreichen sein.
VOORZICHTIGHEID:
Om de voeding van dit product volledig te
onderbreken moet de stekker uit het stopcontact
worden getrokken.
De netstekker wordt gebruikt om de
stroomtoevoer naar het toestel volledig te
onderbreken en moet voor de gebruiker
gemakkelijk bereikbaar zijn.
PRECAUTION:
Pour déconnecter complètement ce produit du
courant secteur, débranchez la prise de la prise
murale.
La prise secteur est utilisée pour couper
complètement l’alimentation de l’appareil et l’
utilisateur doit pouvoir y accéder facilement.
ATTENZIONE:
Per scollegare definitivamente questo prodotto
dalla rete di alimentazione elettrica, togliere la
spina dalla relativa presa.
La spina di rete viene utilizzata per interrompere
completamente l’alimentazione all’unità e deve
essere facilmente accessibile all’utente.
iii
FÖRSIKTIHETSMÅTT:
Koppla loss stickproppen från eluttaget för att helt
skilja produkten från nätet.
Stickproppen används för att helt bryta
strömförsörjningen till apparaten, och den måste
vara lättillgänglig för användaren.
NOTE ON USE / HINWEISE ZUM GEBRAUCH /
OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO /
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
• Vermeiden Sie hohe Temperaturen.
Beachten Sie, daß eine ausreichend
Luftzirkulation gewährleistet wird, wenn das
Gerät auf ein Regal gestellt wird.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
• Evitate di esporre l’unità a temperature alte.
Assicuratevi che ci sia un’adeguata
dispersione del calore quando installate l’unità
in un mobile per componenti audio.
• Evite altas temperaturas
Permite la suficiente dispersión del calor
cuando está instalado en la consola.
• Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het
apparaat op een rek wordt geplaatst.
• Undvik höga temperaturer.
Se till att det finns möjlighet till god
värmeavledning vid montering i ett rack.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie
den Stecker herausziehen.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
• Manneggiate il filo di alimentazione con cura.
Agite per la spina quando scollegate il cavo
dalla presa.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el
cordón de energía.
• Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer
deze moet worden aan- of losgekoppeld.
• Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
• Keep the set free from moisture, water, and
dust.
• Halten Sie das Gerät von Feuchtigkeit, Wasser
und Staub fern.
• Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
• Tenete l’unità lontana dall’umidità, dall’acqua e
dalla polvere.
• Mantenga el equipo libre de humedad, agua y
polvo.
• Laat geen vochtigheid, water of stof in het
apparaat binnendringen.
• Utsätt inte apparaten för fukt, vatten och
damm.
• Unplug the power cord when not using the
set for long periods of time.
• Wenn das Gerät eine längere Zeit nicht
verwendet werden soll, trennen Sie das
Netzkabel vom Netzstecker.
• Débrancher le cordon d’alimentation lorsque l’
appareil n’est pas utilisé pendant de longues
périodes.
• Disinnestate il filo di alimentazione quando
avete l’intenzione di non usare il filo di
alimentazione per un lungo periodo di tempo.
• Desconecte el cordón de energía cuando no
utilice el equipo por mucho tiempo.
• Neem altijd het netsnoer uit het stopkontakt
wanneer het apparaat gedurende een lange
periode niet wordt gebruikt.
• Koppla ur nätkabeln om apparaten inte
kommer att användas i lång tid.
* (For sets with ventilation holes)
• Do not obstruct the ventilation holes.
• Die Belüftungsöffnungen dürfen nicht
verdeckt werden.
• Ne pas obstruer les trous d’aération.
• Non coprite i fori di ventilazione.
• No obstruya los orificios de ventilación.
• De ventilatieopeningen mogen niet worden
beblokkeerd.
• Täpp inte till ventilationsöppningarna.
• Do not let foreign objects in the set.
• Keine fremden Gegenstände in das Gerät
kommen lassen.
• Ne pas laisser des objets étrangers dans l’
appareil.
• E’ importante che nessun oggetto è inserito
all’interno dell’unità.
• No deje objetos extraños dentro del equipo.
• Laat geen vreemde voorwerpen in dit apparaat
vallen.
• Se till att främmande föremål inte tränger in i
apparaten.
• Do not let insecticides, benzene, and thinner
come in contact with the set.
• Lassen Sie das Gerät nicht mit Insektiziden,
Benzin oder Verdünnungsmitteln in Berührung
kommen.
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
• Assicuratevvi che l’unità non venga in contatto
con insetticidi, benzolo o solventi.
• No permita el contacto de insecticidas,
gasolina y diluyentes con el equipo.
• Laat geen insektenverdelgende middelen,
benzine of verfverdunner met dit apparaat in
kontakt komen.
• Se till att inte insektsmedel på spraybruk,
bensen och thinner kommer i kontakt med
apparatens hölje.
• Never disassemble or modify the set in any
way.
• Versuchen Sie niemals das Gerät auseinander
zu nehmen oder auf jegliche Art zu verändern.
• Ne jamais démonter ou modifier l’appareil d’
une manière ou d’une autre.
• Non smontate mai, nè modificate l’unità in
nessun modo.
• Nunca desarme o modifique el equipo de
ninguna manera.
• Nooit dit apparaat demonteren of op andere
wijze modifiëren.
• Ta inte isär apparaten och försök inte bygga
om den.
iv
CAUTION
• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths,
curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• The apparatus shall not be exposed to dripping or splashing for use.
• No objects filled with liquids, such as vases, shall be placed on the apparatus.
• DECLARATION OF CONFORMITY
• DECLARACIÓN DE CONFORMIDAD
We declare under our sole responsibility that this product,
to which this declaration relates, is in conformity with the
following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and
EN61000-3-3.
Following the provisions of 73/23/EEC, 2004/108/EC and
93/68/EEC Directive.
• ÜBEREINSTIMMUNGSERKLÄRUNG
Declaramos bajo nuestra exclusiva responsabilidad que
este producto al que hace referencia esta declaración, está
conforme con los siguientes estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y
EN61000-3-3.
Siguiendo las provisiones de las Directivas 73/23/EEC,
2004/108/EC y 93/68/EEC.
• EENVORMIGHEIDSVERKLARING
Wir erklären unter unserer Verantwortung, daß dieses
Produkt, auf das sich diese Erklärung bezieht, den
folgenden Standards entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und
EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC,
2004/108/EC und 93/68/EEC.
• DECLARATION DE CONFORMITE
Wij verklaren uitsluitend op onze verantwoordelijkheid dat
dit produkt, waarop deze verklaring betrekking heeft, in
overeenstemming is met de volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en
EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 73/23/EEC,
2004/108/EC en 93/68/EEC.
• ÖVERENSSTÄMMELSESINTYG
Nous déclarons sous notre seule responsabilité que l’
appareil, auquel se réfère cette déclaration, est conforme
aux standards suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et
EN61000-3-3.
D’après les dispositions de la Directive 73/23/EEC,
2004/108/EC et 93/68/EEC.
Härmed intygas helt på eget ansvar att denna produkt,
vilken detta intyg avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och
EN61000-3-3.
Enligt stadgarna i direktiv 73/23/EEC, 2004/108/EC och
93/68/EEC.
• DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo prodotto,
al quale la nostra dichiarazione si riferisce, è conforme alle
seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e
EN61000-3-3.
In conformità con le condizioni delle direttive 73/23/EEC,
2004/108/EC e 93/68/EEC.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
,,
CLASS 1
,,
LASER PRODUCT
ATTENZIONE: QUESTO APPARECCHIO E’
DOTATO DI DISPOSITIVO OTTICO CON RAGGIO
LASER.
L’USO IMPROPRIO DELL’APPARECCHIO
PUO’ CAUSARE PERICOLOSE ESPOSIZIONI A
RADIAZIONI!
ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING–
v
OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I
DENNA BRUKSANVISNING SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG
LASERSTRÅLNING SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THIS PRODUCT SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
• Use compact discs that include the
mark.
CD’s with special shapes (heart-shaped CD’s, octagonal
CD’s etc.) cannot be played on this set.
Attempting to do so may damage the set. Do not use such
CD’s.
Zeichen tragen.
• Benutzen Sie Compact Discs, die das
Speziell geformte CD’s (herzförmige CDs, achteckige CDs,
usw.) können auf dieser Anlage nicht abgespielt werden.
Der Versuch derartige CDs abzuspielen kann die Anlage
beschädigen. Verzichten Sie auf die Benutzung solcher
CDs.
.
• Utiliser des disques compacts portant le logo
Des CD avec des formes spéciales (CD en forme de coeur,
des CD octogonaux, etc.) ne peuvent pas être lus sur cet
appareil.
Le fait de l’essayer, risque d’endommager le lecteur. Ne
pas utiliser de tels CD.
.
• Usare compact disc che includono il marchio
I CD con forme particolari (CD a forma di cuore, CD
ottogonali ecc.) non possono essere riprodotti su questo
apparecchio.
L’apparecchio si potrebbe danneggiare se si cerca di farlo.
Non utilizzare questi CD.
.
• Use discos compactos con la marca
En este equipo no es posible reproducir CDs con formas
especiales (CDs con forma de corazón, CDs octagonales,
etc.).
Si intenta hacerlo, el equipo podrá resultar dañado. No use
este tipo de CDs.
.
• Gebruik compact discs voorzien van het logo
CD’s met speciale vormen (bijv. CD’s in de vorm van een
hart, achthoekige CD’s, enz.) kunnen met dit toestel niet
worden afgespeeld.
Wanneer u dit toch probeert, zal u het toestel beschadigen.
Speel dergelijke CD’s dus niet af.
-märket.
• Använd CD-skivor med
Specialformade CD-skivor (hjärtformade, åttkantiga, m m)
går inte att spela på den här apparaten.
Utrustningen kan skadas om du försöker göra detta.
Använd inte CD-skivor av denna typ.
Disc
Residue
Rückstand
Résidu
Residuo
Residuos
Oneffenheid
Plastrester
• The disc may not play normally if there is residue along
the edges of the center hole.
• When using new discs in particular, use a pen, etc., to
remove the residue.
• Die Disk kann nicht normal abgespielt werden, wenn
sich ein Rückstand entlang der Mittellochenden
befindet.
• Insbesondere, wenn Sie neue Disks benutzen, dann
entfernen Sie mit einem Stift, etc. den Rückstand.
• Le disque peut ne pas être lu normalements s’il y a un
résidu le long des bord du trou central.
• Lors de l’utilisation de nouveaux disques en particulier,
utiliser un stylo à bille, etc., pour enlever le résidu.
• Il disco può non essere riprodotot in modo normale se
ci sono dei residui lungo I bordi del foro centrale.
• Usate una penna, ecc., per rimuovere I residui,
specialmente quando usate dischi nuovi.
• El disco no puede ser reproducido normalmente debido
a la terminación deficiente de los bordes del agujero
central.
• Para quitar estos residuos de material, especialmente
cuando vaya a re-producir discos nuevos, utilice un
bolígrafo, o algo similar.
• Het is mogelijk dat de disc niet normaal wordt
weergegeven als de randen van het middengat van de
schijf oneffenheden vertonen.
• Verwijder vooral bij gebruik van nieuwe discs de
oneffenheden met een pen of iets dergelijks.
• Det kan uppstå fel vid CD-avspelningen om det finns
plastrester kvar i mitthålet.
• Tänk på att bort dessa med en penna, e d, särskilt om
CD-skivan är ny.
vi
• This unit can display text information on the display when
playing CD text discs which contain text information in
English category.
The CD text disc includes the mark shown above.
NOTE:
• This unit can provide a text display of the following types
of characters. Other types of characters will result in “ ”
being displayed.
• Alphabet
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
• Numbers
0123456789
• Symbols
SPACE
• Bei der Wiedergabe von CD-Textdiscs, die Funktionstasten
in englischer Kategorie enthalten, kann dieses Gerät auf
dem Display Funktionstasten anzeigen.
Die CD-Textdiscs sind mit dem rechts dargestellten Logo
versehen.
HINWEIS:
• Dieses Gerät kann aus den nachfolgend aufgeführten
Zeichenarten bestehende Texte anzeigen. Bei anderen
Zeichenarten wird “ ” angezeigt.
• Alphabet
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
• Zahlen
0123456789
• Symbole
SPACE
• Cet appareil peut afficher les textes d'information lors de la
lecture de CD qui comportent ces textes, dans la catégorie
anglaise.
Les CD avec texte se repèrent à la marque indiquée à
droite.
REMARQUE:
• Cet appareil permet l’affichage de textes composés avec
les types de caractère suivants. Tous les autres types de
caractère seront affichés ainsi “ ”.
• Alphabétiques
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
• Chiffres
0123456789
• Symboles
SPACE
• Quest’unità può visualizzare dei testi sul display durante la
riproduzione di CD che contengono dei testi in inglese.
Il disco CD con testi include il marchio mostrato qui a
destra.
NOTA:
• Quest’unità è in grado di fornire una visualizzazione dei
testi usando i seguenti tipi di caratteri. Altri tipi di caratteri
causeranno la visualizzazione dell’indicazione “ ”.
• Alfabeto
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
• Numeri
0123456789
• Simboli
SPACE
vii
• Esta unidad puede mostrar información de texto en la
pantalla cuando se reproducen discos CD de Texto que
contengan información de texto en la categoría de Inglés.
Los discos CD de Texto incluyen la marca indicada a la
derecha.
NOTA:
• Esta unidad puede mostrar visualizaciones de texto de los
siguientes tipos de caracteres.Otros tipos de caracteres
harán que se visualice “ ”.
• Alfabeto
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
• Números
0123456789
• Símbolos
SPACE
• Dit toestel kan tekstinformatie op het display tonen bij het
weergeven van CD-Text discs met tekstinformatie in de
categorie Engels.
Een CD-Text disc is voorzien van het logo rechts.
OPMERKING:
• Dit toestel kan de volgende tekens als tekst weergeven.
Voor andere types van tekens verschijnt
“ ” op het display.
• Alfabet
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
• Getallen
0123456789
• Symbolen
SPACE
• Denna apparat kan visa text på displayen när du spelar
CD-textskivor innehållande information på engelska.
CD text-skivor bär märket som anges på höger sida.
OBSERVERA:
• Apparaten kan visa text med följande teckentyper. För
övriga tecken kommer “ ” att visas.
• Alfabetiska
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
• Siffror
0123456789
• Symboler
SPACE
1. GENERAL INFORMATION .............................2
■ ACCESSORIES
ENGLISH
– TABLE OF CONTENTS –
Check that the following parts are included in addition
to the main unit:
FEATURES ..........................................................2
PART NAMES AND FUNCTIONS ......................3
q Remote Control Unit (RC-1061) .................................. 1
2. PREPARATIONS ..............................................9
INSTALLATION ...................................................9
CONNECTIONS ................................................10
3. DEVICE OPERATION .................................... 11
SUPPORTED AUDIO CD .................................11
INSERTING AND EJECTING A DISC ...............11
NORMAL CD PLAYBACK ................................12
ADVANCED CD PLAYBACK .............................14
PLAYING AUDIO FILES....................................17
PRESET FUNCTIONS AND OPERATIONS ......20
w Size “AAA” batteries .................................................. 2
UTILITY MENU .................................................26
4. NETWORK FUNCTIONALITY AND
OPERATION...................................................28
Network functionality and Operation ...............28
How to hook up the DN-C640
to your network .............................................28
e Audio Cord (Stereo)..................................................... 1
r AC Power Cord ........................................................... 1
(Europe models) .......................................................... 2
t Operating Instructions ................................................ 1
y Warranty card .............................................................. 1
Setting up a Shared Folder on a
Server or a Network Server ..........................29
5. CONTROL FEATURES ..................................30
WEB REMOTE .................................................30
RS-232C CONTROL .........................................36
GPIO (Parallel) CONTROL ................................41
6. TROUBLESHOOTING ...................................43
7. SPECIFICATIONS ..........................................44
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can
be reused. Please dispose of any materials in accordance
with the local recycling regulations.
When discarding the unit, comply with local rules or
regulations.
Batteries should never be thrown away or
incinerated but disposed of in accordance
with the local regulations concerning chemical
waste.
This product and the accessories packed
together constitute the applicable product
according to the WEEE directive except
batteries.
1
ENGLISH
1. GENERAL INFORMATION
FEATURES
■ Standard Functions of Professional CD Player
Slot-In Disc Drive
Reads and Displays CD TEXT & MP3 ID3 Tags
Quick Track Search with Jog Wheel
Cue to Music
Balanced Audio Output with Trim
2 Sets of Unbalanced Audio Outputs (1 Fixed / 1 Variable level)
SPDIF and AES/EBU Digital Audio Output
Plays Back Audio Files from a CD or DVD Data Disc
Reads CD-R / CD-RW / DVD-R / DVD-RW / DVD+R / DVD+RW
discs
Supports CD-DA, WAVE, MPEG-1/2 Layer III (MP3), MPEG1/2 Layer II (MP2), WMA
■ Advanced CD Playback
Quick Replay (Skip Back) (Time programmable)
+/– 12% Variable Pitch Control
Program Play
Single, All, A-B Repeat modes
Random Play mode
User – Selectable Finish Mode (Stop, Next, Recue, Continuous)
Auto Cue
End Monitor
End of Message (EOM) indicator
■ Network Audio Playback – Streams Audio from Shared
Network Resources
Uploads Audio Files from Disc to the Network Drive
■ 19-inch 1U rack space
■ IR Remote Control (Remote controller RC-1061 included)
■ Embedded Web Browser Control
Remote Control Same as Panel Operation
Up/Downloadable Program Playlists
Preset setting
■ External Remote Control
Serial control (RS232C)
Parallel control
2
ENGLISH
1. GENERAL INFORMATION
PART NAMES AND FUNCTIONS
(1) Front panel
2
4
NETWORK CD PLAYER
0
6
DN-C640
10
-= ~!@
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
LEVEL
EJECT
NETWORK
MENU/STORE
CUE
POWER ON/OFF
UTILITY
PHONES
1 35
7
8
SHIFT
CANCEL
90
q POWER ON/OFF switch and indicator
• Press this to turn the Power ON or OFF.
• The indicator lights when the power is turned on.
w LEVEL control
• Use this to adjust the output level of the headphones.
Warning!
• When using headphones, take care not to turn
the volume too high. Listening at high volumes for
extended periods of time may result in permanent
hearing damage.
e PHONES Jack
• For private listening, you can connect your headphones
to this jack.
r DISC slot
• Insert a CD or DVD into the slot, label side upwards.
t EJECT button
• Press this to eject the disc. The EJECT button is locked
when Eject Lock is on in the preset menu and the unit
is in PLAY mode.
y Display unit
• Refer to page 6 for details.
u Remote control sensor
i NETWORK button and indicator (Blue)
• Press this to select between the network drive or
internal drive.
• The indicator lights when the network drive is selected.
#
SKIP BACK
PLAY/PAUSE
PITCH
$% ^ &
o MENU/STORE/UTILITY button
• Press to enter the preset menu or to store changes
made in the preset menu.
• In shift mode, press this button to enter the utility
menu.
!0 SHIFT button and indicator (Amber)
• Press to turn the shift mode on or off. When in shift
mode, the indicator lights.
• Press this button again to exit shift mode.
!1 DISPLAY/LOCK button
• Press this to change the time mode on the display.
• In shift mode, press and hold this more than three
seconds to lock or unlock the controls on the front
panel.
!2 A-B/END MON button
• Use this to play a set section repeatedly. When the
button is pressed once during playback, that position is
set as the A point and the “A-” indicator flashes on the
display.
• When the button is pressed again, that position is
set as the B point, the “A-B” indicator stops flashing
(remaining lit), and the A-B section begins playing
repeatedly.
• When the button is pressed again, A-B repeat is
canceled and the mode returns to the normal play
mode.
• In shift mode, press this button to start the End
Monitor.
!3 PITCH button and indicator (Amber)/
TEXT button
• Press this button to switch the PITCH on or off.
• In shift mode, press this button to display the text
information.
3
ENGLISH
1. GENERAL INFORMATION
!4 !5 5 6 / – INDEX/DIR + button
• These buttons are used to accurately change the
positions where playback will start or operate as FF or
FR when held down.
• In shift mode, use this button to select the index (Audio
CDs) or directory (music file discs).
!6 STOP/CANCEL button
• Press this button to stop playback.
• Press this to cancel a selection in program setting.
• During preset setting operations, press to cancel all
entries made and return to stop mode.
!7 SKIP BACK button
• Press this button for instant replay at the currently
playing audio. The amount of time skipped back is
adjustable in the preset menu.
!8 CUE button and indicator (Amber)
• When pressed during playback, the pickup returns to
the position at which playback last started or the next
track and the CUE mode is set.
• When pressed during manual search, the CUE mode is
set at that position.
4
!9 PLAY/PAUSE button and indicator (Green)
• Use this button to start playback or pause playback.
@0 Jog wheel with PUSH/ENTER button
• Turn the jog wheel clockwise by one click to move one
track forward, counterclockwise by one click to move
one track backward.
• In the preset mode, turn the jog wheel to select the
preset item and push to enter.
• In the utility mode, turn the jog wheel to select the
preset item and push to enter.
• In the shift mode, use this jog wheel to set the pitch
value.
• In the stop mode or in the play/pause mode, push this
to start playback.
ENGLISH
1. GENERAL INFORMATION
(2) Rear panel
1 GND
R
FIXED VARIABLE
L
2 HOT(+)
L
SPDIF
AES/EBU
L
3 COLD(-)
LEVEL
LEVEL
RS232C
R
SERIAL NO.
R
ANALOG OUTPUT
x z
PARALLEL
DIGITAL OUTPUT
cv
bn
z ANALOG (Balanced) OUTPUT
• These are active balanced outputs using XLR type
connections. The CD's or network's audio playback
signals are output from these connectors.
• Pin layout : 1. GND / 2. Hot / 3. Cold
• Applicable connector :
Cannon XLR-3-31 or equivalent.
NOTE :
• Do not short-circuit the hot or cold pin with the
common pin.
REMOTE
LAN
m
,
.
b DIGITAL (AES/EBU) OUTPUT
• This is a balanced output using an XLR type jack.
1.Common / 2.Hot / 3.Cold.
• Signal format : SPDIF(IEC-958 Type II) or AES/EBU
(select in menu)
• Sampling frequency : 32 /44.1 /48 /Auto (select in
menu)
• Applicable connector: cannon XLR-3-31 or equivalent
n RS232C connector
Connector for serial control from an external device.
m PARALLEL connector
x LEVEL Control
• Use these controls to adjust the level of the audio
signals from the BALANCED OUT connectors.
c ANALOG (Unbalanced) OUTPUT
• These are unbalanced outputs using RCA type jacks.
• VARIABLE
Use the remote control unit or web GUI to adjust the
output level.
Connector for parallel control from an external device.
, LAN connector
10BASE-T and 100BASE-TX RJ-45 LAN terminal for
network connection.
. AC inlet
Connect the included power cord here.
v DIGITAL (SPDIF) OUTPUT
• This is a coaxial output using an RCA type jack.
• Signal format : SPDIF(IEC-958 Type II ) or AES/EBU
(select in menu)
• Sampling frequency : 32 /44.1 /48 /Auto (select in
menu)
5
ENGLISH
1. GENERAL INFORMATION
(3) Display
Specific Icons and Character displays inform you of the current operating status and menu items of the device.
[Basic CD Operation]
“TOTAL” illuminates to indicate that the time displayed is the TOTAL time of the track or file.
“TOTAL” can also be lit with “TRACK” in stop mode to indicate the total number of tracks or files in the current disc or directory.
“REMAIN” illuminates to indicate that the time displayed is the remaining time of the currently playing track.
“REMAIN” can also be lit with the “TOTAL” icon to indicate the TOTAL REMAINING time of the disc.
Both icons off indicates that the time displayed is the ELAPSED time of the currently playing track or file.
Lights in repeat
playback mode.
Light when auto cue mode is on.
Lights when program playback mode is on.
Lights when single playback mode is on.
Lights in random
playback mode.
Either of icons lights according to the finish mode.
Flashing while end of message is working.
Displays the pitch control setting.
Track number /
Index number
Total number of Tracks
Playing time (minute and second)
Frame number
Displays various information and text message
[Audio file Operation]
Lights when selected audio file is in root directory of the disc.
Lights when the audio data disc is loaded.
Lights when the sampling frequency or bitrate of the file playing is available and displayed.
Lights when the playing time is displayed in the character display.
Track number /
Total number of Tracks
6
Playing time (hour, minute, second and frame number)
Displays file information, recorded time, and the other information
ENGLISH
1. GENERAL INFORMATION
(4) Remote control unit (RC-1061)
y A-B button
Press this to set or cancel the A-B repeat function.
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!7
!8
!9
@0
@1
@2
@3
@4
u END MON button
Press this to start the End Monitor funciton.
i UTILITY button
Press this to enter the Utility menu.
o 3 / 4 / 1 / 2 buttons
Use these for menu selection and 1 / 2 for track
selection.
!0 INDEX+/– buttons
Press this to select the index (Audio CDs) or directory
(Audio data discs / Network drive).
!1 STOP button
Press this to stop the playback.
!2 SKIP BACK button
@5
@6
@7
Press this for instant replay of the currently playing audio.
!3 ∞ / § buttons
Press these to skip from track to track or file to file.
!4 EJECT button
Press this to eject the disc.
!5 LOCK button
Press this to lock or unlock the buttons on the front
panel.
!6 RANDOM button
Press this to set the random playback mode.
!7 PROGRAM button
Press this to enter the program mode.
q POWER button
Press this to turn the power on or off.
w PITCH +/– buttons
Press these buttons to adjust the Pitch up(+) or down(-).
PITCH ON/OFF button
Press this to turn the pitch control function on or off.
e 0-9 buttons
Press these to select the desired track in the stop mode.
r DISPLAY button
Press this to change the time mode on the display.
t TEXT button
!8 RECALL button
Press this to recall the programmed track.
!9 CANCEL button
Press this to cancel a selection in program setting.
@0 REPEAT button
Press this to set repeat playback.
@1 NETWORK button
Press this to switch between the network drive or internal
drive.
@2 MENU/STORE button
Press this to enter the preset menu or to store changes
made in the preset menu.
Press this to display the CD Text or ID3 tag information.
7
ENGLISH
1. GENERAL INFORMATION
@3 VOL+/– buttons
Press these to change the playback volume output
through the unbalanced VARIABLE Output jacks.
2. Load the two new size “AAA” batteries inside the battery
compartment while taking care to align their polarities
correctly with the polarity markings ( with and with
).
@4 ENTER button
Press this to confirm selections in the menus.
Size “AAA” (UU-4) batteries × 2
@5 PLAY/PAUSE button
Press this to start playback or pause playback.
@6 CUE button
Press this to return to the position at which playback
started or the next track.
@7 5 / 6 buttons
Press this to accurately change the positions where
playback will start or operate as FF or FR when held
down.
3. Push the battery cover down in the direction of the arrow
to close it.
• Operational range
As shown in the figure below, the player can be operated
by the remote control unit in a range which of about 5
meters from the player’s remote sensor and over an angle
up to 30 degrees to the left and 30 degrees to the right of
the position directly in front.
CAUTION:
5m
60°
• Loading batteries
Before using the supplied remote control unit for the first
time, load the batteries in the remote control unit. The
batteries provided are used to verify the operations of the
remote control unit only.
1. Take hold of the tab on the battery cover which is found
on the back side of the remote control unit, and pull it
up.
8
Misuse of the batteries can result in electrolyte leakage,
rupturing, corrosion, etc.
Bear in mind the following points when using batteries.
• Remove the batteries from the remote control unit if
the unit is not going to be used for a prolonged period (a
month or more).
• Do not use an old battery together with a new one.
• Insert the batteries while ensuring that their a and · poles
are properly aligned with the corresponding markings on
the remote control unit.
• Batteries with the same shape may have different
voltages. Do not use different types of batteries
together.
• If electrolyte has leaked, thoroughly wipe the inside
of the battery compartment, and then insert new
batteries.
ENGLISH
2. PREPARATIONS
INSTALLATION
■ Mounting in a rack
• The DN-C640 is of 1U size, allowing it to be mounted in EIA
standard 19-inch racks.
When mounting the DN-C640 in a rack, use guide rails or
shelf boards, etc., on the rack side to prevent weight from
being applied to the front of the DN-C640. The fittings alone
cannot support the weight of the DN-C640 (4.3 kg).
Do not cover the top of the unit. Remember, heat is
dispersed from the DN-C640’s upper surface.
• Set up the installation environment carefully. For example,
take care to protect the DN-C640 from heat from other
devices. If necessary, use forced ventilation. The surrounding
conditions must meet the specifications described in
“SPECIFICATIONS” on Page 44.
• The DN-C640 will work normally when the player unit is
mounted with the front panel within 10 degrees of the
vertical plane. If the unit is tilted excessively, discs may not
load or unload properly.
Max. 10°
DN-C640
• If the DN-C640 is placed near an amplifier, tuner or other
components, noise (induced hum) or beat interference may
result (especially during AM or FM reception).
If this occurs, separate the DN-C640 from other components
or reorient its position.
9
ENGLISH
2. PREPARATIONS
CONNECTIONS
Leave your entire system (including the DN-C640) turned off until all connections between the DN-C640 and other components
have been completed.
■ Connection precautions
• Before proceeding with connections or disconnections of cables and power cords, be sure to turn all system components
off.
• Ensure that all cables are connected properly to the L (left) and R (right) jacks.
• Insert plugs fully into the terminals.
• Connect the CD output jacks to the amplifier CD or AUX input jacks.
• Connect one end of a straight-through RS-232 serial cable into Communication Port on the back of the DN-C640 and connect
the other end into the “RS-232C” port on the back of the computer.
• Connect the DN-C640 to your network using a straight-through Ethernet cable or directly to a non-networked computer using
a cross-over cable.
■ Basic connection
Analog audio output (balanced) to
connect to analog audio equipment.
If necessary, adjust output level with
trim volume.
1 GND
R
Analog audio output (unbalanced) to
connect to analog audio equipment.
If necessary to adjust output level, you
should connect to “VARIABLE” and
adjust by remote control.
FIXED VARIABLE
L
2 HOT(+)
L
L
R
R
SPDIF
D-Sub Female 25-Pin Parallel Interface
to connect to external input trigger
device.
Connect the included power cord into
an outlet providing the right voltage.
<Please refer to “CAUTION” below>
AES/EBU
3 COLD(-)
LEVEL
LEVEL
ANALOG OUTPUT
RS232C
PARALLEL
SERIAL NO.
DIGITAL OUTPUT
Digital audio output (unbalanced and balanced) to connect to digital
audio equipment.
If necessary, select output signal format in the PRESET MENU.
(Both unbalanced and balanced terminal output same signal format set
in preset menu.)
REMOTE
D-Sub Female 9-Pin RS-232
Serial Interface to connect
directly to a computer using
a straight-through cable.
LAN
10/100 BASE-T RJ-45 LAN terminal for connection to a
network using a straight-through cable or to a non-networked
computer using a cross-over cable.
CAUTIONS:
• Before connecting, the POWER ON/OFF switch should be set the OFF position.
• Do not touch the power cord with wet hands.
• When disconnecting the power cord, always make sure that you take hold of the plug. Yanking out or bending the cord can
damage it and/or cause electric shocks or a fire.
10
SUPPORTED AUDIO CD
INSERTING AND EJECTING A DISC
In addition to standard CD-DA discs, the DN-C640 can read
several other CD-DA formats. Please refer to page 17 for detail
of reading and operation of data discs.
Inserting and Ejecting a disc is only available when the unit is
powered on.
Compact Disc Digital Audio (CD-DA)
ENGLISH
3. DEVICE OPERATION
1. If the unit is OFF, press the POWER ON/OFF switch to
turn on the power.
2. Hold the disc by the edges and insert it in the DISC slot.
(Do not touch the signal surface, i.e., glossy side.)
3. Press the EJECT button to eject the disc.
Compact Disc TEXT (CD TEXT)
Enhanced Music CD (CD EXTRA)
NOTE:
• Some copy-controlled CDs may not conform to official
CD standards. They are special discs and may not play
on the DN-C640.
■ Messages
Messages may appear on the display while using the DNC640.
The meaning of message are explained below.
Message
Meaning
No Disc
No disc is inserted.
Eject Locked
Unit is playing and Eject lock
is on in the preset menu.
CAUTIONS:
• Do not push in the disc manually when the power is
off as this may cause malfunction and damage the CD
player.
11
ENGLISH
3. DEVICE OPERATION
NORMAL CD PLAYBACK
(1) Before Starting Playback
1. Press the POWER ON/OFF switch to turn on the
power.
NETWORK CD PLAYER
0
(4) Returning to the position at which
playback started
Set the CUE mode to RECUE in the preset menu and press the
CUE button during playback, the pickup returns to the position
at which playback started and the pause mode is set.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
DN-C640
- INDEX/DIR +
PUSH
ENTER
10
LEVEL
CUE
EJECT
CANCEL
POWER ON/OFF
SKIP BACK
PLAY/PAUSE
PITCH
PHONES
2. Load the disc you want to play.
3. Make sure the Preset Menu settings are set accordingly
for the intended use. (See Page 22.)
Press the
3 button
Press the
; button
Press the 3 button
Play internal
(2) Starting Playback
Press the
CUE button
Position
on the
disc
Play internal
Back cue operation
1. Press the PLAY/PAUSE button.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
(5) Stopping playback
- INDEX/DIR +
PUSH
ENTER
1. Press the STOP/CANCEL button.
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
(6) Advancing to the next track during
playback
1. Turn the jog wheel clockwise or press the § button
during playback.
1. Press the PLAY/PAUSE button during playback. (Button
Flashes when in PAUSE mode)
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
(3) Pausing playback at any point
Playback can be temporarily halted and then continued from
the same point in the track.
DISPLAY
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• The pickup will advance to the beginning of the next
track and playback will continue when the Start mode is
set to “Play” in the preset menu.
• The pickup will advance to the beginning of the next
track and remain in CUE mode when the Start mode is
set to “Stop” or “Cue” in the preset menu.
(See Page 22 for Start Mode Settings)
PITCH
NOTE:
2. To continue playback, press the PLAY/PAUSE button.
12
• When the Next track reserve mode is set to "ON" in the
preset menu, if you turn the jog wheel during playback,
the track number indication of the display will blink and
you can select the track to play next.
(9) Index Skip
(7) Returning to the beginning of the
current track during playback
1. Turn the jog wheel counterclockwise or press the ∞
button during playback.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• The pickup will return to the beginning of the current
track and playback will continue when the Start mode is
set to “Play” in the preset menu.
• The pickup will return to the beginning of the current
track and remain in CUE mode when the Start mode is
set to “Stop” or “Cue” in the preset menu.
An index search can be performed during the play of a track
whose index has been recorded.
This function is useful for starting play at a specific location
of a long track. It returns play to a previous index which is
equivalent to the number of times the INDEX – button on
the unit or IR control was pressed; alternatively, it advances
play to a subsequent index which is equivalent to the number
of times the INDEX + button on the unit or IR control was
pressed.
If the index skip function is operated for a CD with no indexes
recorded, the “No Index” message appears on the main
display, and play returns to the start of the track now playing.
NOTE:
NOTE:
• The index skip function cannot be used for discs
recorded with audio files. In that instance, the index
button navigate directories.
• When the Next track reserve mode is set to "ON" in the
preset menu, if you turn the jog wheel during playback,
the track number indication of the display will blink and
you can select the track to play next.
(10) Direct Jump
(8) Audible quick search
• Using this function, you can search for a desired point quickly
within a track in the both forward or reverse direction.
• When a SEARCH button is pressed during the pause mode
and the button is released, the pause mode is cancelled at
that point with the sound being output.
Manual search forward
A-B
PITCH
LOCK
END MON
TEXT
Select the number of the track to be played directly during the
stop mode by pressing the numeric buttons (0 to 9) on the
remote control unit.
To select track number 10 or above, use the numeric buttons
to select the higher digit first and then select the lower digit.
The operation after the number of the track is selected
depends on the start mode settings.
Example: To play track 12
1. Set the start mode to “Play”.
1. Press the SEARCH (6) button during playback.
DISPLAY
ENGLISH
3. DEVICE OPERATION
- INDEX/DIR +
2. Press the “1” numeric button.
PUSH
ENTER
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• The playback mode is cancelled, and the search point is
reproduced repeatedly.
• Every time the SEARCH (6) button is pressed the
playback point advances one frame.
• Playback of the track is sped up while the SEARCH (6)
button is pressed.
3. Within 1 second, press the “2” numeric button.
Manual search in reverse
1. Press the SEARCH (5) button during playback.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• The playback mode is cancelled, and the search point is
reproduced repeatedly.
• Every time the SEARCH (5) button is pressed the
playback point retreats one frame.
• Playback of the track is sped up while the SEARCH (5)
button is pressed.
13
ENGLISH
3. DEVICE OPERATION
ADVANCED CD PLAYBACK
(1) Repeating playback of a desired interval
3. Press the PLAY/PAUSE button.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
(Single track repeat)
CANCEL
1. In the Preset menu, set the finish mode to “Stop”,
“Next” or “Recue”. (See page 22)
2. Press the REPEAT button on the remote control unit.
• The “REPEAT 1” indicators light on the display and the
single track repeat mode is set.
3. Use the select knob to select the track to be played
repeatedly.
SKIP BACK
PLAY/PAUSE
PITCH
• The disc is played repeatedly.
• The all track repeat mode can also be set by pressing the
REPEAT button during playback.
• If the REPEAT button is pressed during program play,
the tracks are played repeatedly in the programmed
order.
• To cancel the all track repeat mode, press the REPEAT
button repeatedly until the “REPEAT” indicator turns
off.
(2) Repeating playback a specific section
within a track
4. Press the PLAY/PAUSE button.
(A-B repeat)
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
1. During playback, press the A-B button at the point where
you want to start repeated playback (A point).
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• Playback starts.
• Once the selected track ends, it is played again from the
beginning.
• The single track repeat mode can also be set by pressing
the REPEAT button during playback. The current track is
played repeatedly.
• To cancel the single track repeat mode, press the
REPEAT button repeatedly until the “REPEAT 1”indicator
turns off.
(All track repeat)
1. In the Preset menu, set the finish mode to “Continuous”.
(See page 22)
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• The “A-” indicator flashes on the display.
2. Press the A-B button again at the point where you want
to end repeated playback (B point).
• The “A-B” indicator stops flashing (remaining lit), and
the A-B section begins playing repeatedly.
• If no B point is set before the current track ends, the end
of the track is set as the B point.
3. To cancel A-B repeat playback, press the A-B button
again.
2. Press the REPEAT button on the remote control unit.
NOTE:
• The A-B points must be separated by at least 1 seconds
time to work.
• The “REPEAT” indicators light on the display and the all
track repeat mode is set.
14
(3) Playing specific tracks in a specific
order (Program play)
With this function, you can choose any of the tracks on the
disc and program them to play in any order. Up to 99 tracks
can be programmed.
ENGLISH
3. DEVICE OPERATION
3. Press the ∞ or the § button on the remote control unit
to select the track of the program number.
4. Press the CANCEL button on the remote control unit to
delete a track in the program.
Creating the program
1. Press the PROGRAM button on the remote control unit.
5. Press the ENTER button on the remote control unit to
add a track.
• “PGM” indicator flashes, and “P0!” appears on the
display.
2. Press the ∞ or the § button on the remote control unit
to select the first track of the program.
3. Press the ENTER button on the remote control unit to
select the track.
• To enter the next track, press the ENTER button again.
• Repeat steps 2 and 3 to program the tracks in the
desired order.
6. Press the PROGRAM button to exit the program edit
mode.
• Skip to the next desired track and press the ENTER
button again.
• Repeat steps 2 and 3 to program the tracks in the
desired order.
4. Press the PROGRAM button to exit the program input
mode.
• “PGM” indicator lights, and the DN-C640 is ready to play
your program.
Editing the program
• “PGM” indicator lights, and the DN-C640 is ready to play
your program.
Playing the programs
1. Press the PLAY/PAUSE button.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
1. Press the RECALL button on the remote control unit
while the “PXX” is displayed...
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• Program play starts.
Exit the program mode
2. Press the UP or the DOWN button on the remote control
unit to select the program number you want to edit.
1. Press the PROGRAM button.
• “PGM” indicator turns off.
• The program is also cleared when the EJECT button is
pressed.
15
ENGLISH
3. DEVICE OPERATION
(4) Pitch Control
(5) Skip Back
Pitch Control allows the playback of audio at faster (+) or
slower speeds(–).
1. Turning PITCH CONTROL On and OFF
Press the PITCH button
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
SKIP BACK is a feature that allows instant replay of the
currently playing track. When the SKIP BACK button on
the unit or SKIP BACK button on the remote control unit is
pressed during playback, play will skip back by the number of
seconds set in the PRESET MENU and playback will resume
from that point.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
CUE
PITCH
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• Factory default SKIP BACK time is 10 seconds.
• For details on how to set the SKIP BACK time (See Page
23.)
• The PITCH button lights up orange indicating PITCH
CONTROL is ON.
• The play speed increases or decreases depending on
the pitch control setting as indicated in the display.
• Press the PITCH button again to turn PITCH CONTROL
Off.
• The PITCH button light turns off.
2. Adjusting the PITCH CONTROL speed
With the unit in SHIFT mode, turn the jog wheel
counterclockwise ← to reduce the Pitch and speed or
turn the jog wheel clockwise → to increase the Pitch and
speed.
DISPLAY
A-B
(6) End Monitor
END MONITOR is a feature that plays back the final seconds
of the current track. If the Finish Mode is set to “Continuous”
in the preset menu, the DN-C640 plays back the last track of
the current disc. To use this feature, with the unit in SHIFT
mode, press the A-B/END MON button during in CUE mode
on the device or remote control unit and the unit will start
playback from the position before the end of the current track
as set in the PRESET MENU.
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
CANCEL
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
CUE
PITCH
- INDEX/DIR +
SKIP BACK
PLAY/PAUSE
PITCH
PUSH
ENTER
CUE
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
• Factory default END MONITOR time is 10 seconds.
• For details on how to set the END MONITOR time (See
Page 23).
16
ENGLISH
3. DEVICE OPERATION
PLAYING AUDIO FILES
In addition to standard CD-DA discs, the DN-C640 can read audio files from many different types of Data discs. For a list of
compatible compressed and uncompressed audio files, see following section: Audio File Format Specifications.
■ Supported data discs
Compact Disc Recordable (CD-R)
Compact Disc ReWritable (CD-RW)
Digital Versatile Disk Recordable (DVD-R)
Digital Versatile Disk ReWritable (DVD-RW)
RW
DVD plus R (DVD+R)
DVD+R
DVD plus RW (DVD+RW)
DVD+ReWritable
NOTE:
• The DN-C640 supports following file system for the data discs.
ISO9660 Level1 and Level2, Joliet, UDF version 1.50 and 2.00
• The DN-C640 cannot read unfinalized CD-R disc.
• The DN-C640 can only read the 1st session of a multi-session disc.
• There are the following conditions in the data discs that can be read.
– Maximum number of directories:
254
– Maximum number of files:
999
If there are more than 1,000 files, only the first 999 files are played.
– Folder layers:
8 layers, including root
• The DN-C640 does not support two byte character sets.
■ Audio file format specifications
The DN-C640 supports PCM, MP3, MP2 and WMA audio formats.
File Extension
PCM
MP2
MP3
WMA
wav
mpg
mp3
.wma
System
Sample Rate
Bit Rate
Resolution
16-Bit Linear PCM
48kHz, 44.1kHz, 32kHz
–
16-bit
24-Bit Linear PCM
48kHz, 44.1kHz, 32kHz
–
24-bit
ISO/IEC11172-3 MPEG1- L2
48kHz, 44.1kHz, 32kHz
64 kbps – 384 kbps
16-bit
ISO/IEC13818-3 MPEG2- L2
24kHz, 22.05kHz, 16kHz
32 kbps – 128 kbps
16-bit
ISO/IEC11172-3 MPEG1- L3
48kHz, 44.1kHz, 32kHz
32 kbps – 320 kbps
16-bit
ISO/IEC13818-3 MPEG2- L3
24kHz, 22.05kHz, 16kHz
8 kbps – 160 kbps
16-bit
48kHz, 44.1kHz
64 kbps – 192 kbps
16-bit
32kHz
32 kbps – 48 kbps
16-bit
Windows Media Audio
17
ENGLISH
3. DEVICE OPERATION
■ Functions not supported by playing audio
file
The following functions are not supported when the DNC640 encounters discs recorded with these types of audio
files.
• Index skip function is not available.
• While half-sample rate audio file, MPEG1-L2 (24kHz,
22.05kHz, 16kHz) and MPEG2-L3 (24kHz, 22.05kHz,
16kHz) are playable; signal to the digital outputs is not
available if the Digital FS is set to "Auto" mode in the
preset menu.
■ Handled audio files as “track” and playing
audio file
■ Displays information
When a data disc is inserted into the DN-C640, various kind
of information are displayed on the 13-digit alphanumeric
part of the display unit.
When in play, pause, search, end mon. or cue state, the
following information is displayed in order by pressing the
DISPLAY/LOCK button.
– Elapsed time
– Remaining time
– File name
A directory (also called a “folder”) is a hierarchical level on
disc media or the network drive.
After loading a data disc and searching all audio files, the
DN-C640 assigns each audio file a track number.
Only the files within the selected directory will be the
target of your operations, and functions such as program
playback and repeat playback will all occur within the same
directory.
– File information
: sample frequency, bit rate or resolution,
and file format (PCM, MP2, MP3,
WMA)
- Recorded date
For example in the illustration below, at first each audio
file is assigned a track number. Directory-AAA, directoryBBB and directory-DDD contain audio files and can be
selected for operations, but directory-CCC is excluded from
operations.
If directory-AAA is selected, CD operations such as program
playback are effective only to audio files of directory-AAA,
it means aaa001.mp3/track# 003 and bbb001.mp3/track#
004 are effective for operation.
- Channel
: year, month and day. [MMMDD YYY]
- Recorded time
: hour, minute and second. [HH:mm:SS]
ROOT (Dir01)
AAA (Dir02)
BBB (Dir03)
: “Stereo” or “Mono”
■ Text information
When a data disc with MP3 files, is inserted into the DNC640, in addition to above information various kind of text
information are displayed on the 13-digit alphanumeric part
of the display unit. This information is recorded in a MP3
file as ID3 tag.
When in play, pause, search, end mon. or cue state, the
following information is displayed in order by pressing the
PITCH/TEXT button with the unit in SHIFT mode.
– [Above information]
bbb001.mp3 (Track# 004)
– Title
CCC
bbb003.txt
aaa001.mp3 (Track# 003)
– Artist
– Album
DDD (Dir04)
ddd001.mp2 (Track# 005)
rrr001.mp3 (Track# 001)
rrr002.wav (Track# 002)
18
NOTE:
• Only standard ID3 information that has been accurately
recorded in the file will be displayed.
(1) Playing audio files on a disc
1. Load a disc containing audio files.
ENGLISH
3. DEVICE OPERATION
(2) Advanced music files playback
The following "Advanced CD playback" functions are possible
with audio files on a disc in the same way as a standard CDDA disc.
See page 14-16 for detail of an operation.
■ Single track repeat
• The display will change to “Loading.”. When the
contents of the disc have been read, the total number of
tracks will be displayed.
■ All track repeat
■ A-B repeat
2. Turn the jog wheel to select a file you want to listen to.
• The file name scrolls and back to the number of track on
the display.
■ Program play
3. Press the PLAY/PAUSE button.
■ Skip back
■ Pitch control
■ End monitor
(Directory skip)
1. In shift mode, press the INDEX/DIR +/– button to select
a folder.
• The display will indicate each name of all folders
including sub-folders.
2. Press the PLAY/PAUSE button.
• Playback will be started from the top file within the
selected folder.
19
ENGLISH
3. DEVICE OPERATION
PRESET FUNCTIONS AND
OPERATIONS
[ Using the remote control unit ]
1. With the unit in stop mode, press the MENU/STORE
button.
The last active preset item appears on the display.
(1) Changing the PRESETS
[ Using the front panel ]
1. With the unit in stop mode, press the MENU/STORE
button.
NETWORK CD PLAYER
0
DN-C640
2. Press the 3 button or the 4 button to select the preset
item you wish to modify.
10
LEVEL
EJECT
PHONES
NETWORK
MENU/STORE
UTILITY
SHIFT
The last active preset item appears on the display.
2. Turn the jog wheel to select the preset item you wish to
modify.
3. Press the ENTER button to confirm your selection.
Preset setting data appears on the display. You will now be
able to edit the preset item.
For details of each preset item, see page 21.
3. Press the jog wheel to confirm your selection.
Preset setting data appears on the display. You will now be
able to edit the preset item.
For details of each preset item, see page 21.
4. Turn the jog wheel to adjust the parameters for that
item.
Press the jog wheel to confirm your setting/action.
Repeat steps 2-4 as needed.
5. Press the MENU/STORE button to save changes or
STOP/CANCEL button to cancel all changes and return
to stop mode.
20
4. Press the 3 button or the 4 button to adjust the
parameters for that item.
Press the ENTER button to confirm your setting/action.
Repeat steps 2-4 as needed.
5. Press the MENU/STORE button to save changes or
STOP button to cancel all changes and return to stop
mode.
ENGLISH
3. DEVICE OPERATION
(2) Table of Preset Items and Default settings
No
(Order)
Display
(Preset item)
Selection Range
Default
Reference
1.
Finish Mode
Stop /Next /Recue /Continuous
Continuous
Page 22
2.
Power On
Play /Stop
Stop
Page 22
3.
Start Mode
Play /Stop /Cue
CUE
Page 22
4.
Cue Mode
Recue /Next
Recue
Page 22
5.
Auto Cue
Off /–48dB /–42dB /–36dB
Off
Page 22
6.
Fade In
Off /0.5sec - 10.0sec (0.5second steps)
Off
Page 23
7.
Fade Out
Off /0.5sec - 10.0sec (0.5second steps)
Off
Page 23
8.
Skip Back
1.0 – 30.0 sec (0.5 second steps)
10.0
Page 23
9.
End Monitor
5 /10 /15 /20 /25 /30 /35 sec
10
Page 23
10.
EndOfMessage
Off /0 /5 /10 /15 /20 /30 /60 sec
10
Page 23
11.
NextTrReserve
On /Off
On
Page 23
12.
Fader Start
Play /Play-Pause
Play-Pause
Page 24
13.
Index Tally
Index2 /Index3
Index2
Page 24
14.
Mono
On /Off
Off
Page 24
15.
Play List
On /Off
Off
Page 24
16.
Auto Sleep
OFF /30sec /10 min /20 min /30min
30 min
Page 25
17.
Eject lock
On /Off
On
Page 25
18.
Digital Out
Broadcast /Consumer
Broadcast
Page 25
19.
Digital FS
Auto /32kHz /44.1kHz /48kHz
Auto
Page 25
20.
Time Zone
Offset -12h to +14h
Offset 0h
Page 25
21.
Machine Name
(Up to 12 digits using 0 – 9, A – Z, a – z)
DNC640A00000
Page 34
22.
IP Address
Auto/ 000 000 000 000 – 255 255 255 255
Auto
Page 34
23.
Subnet Mask
000 000 000 000 – 255 255 255 255
(255 255 255 000)
Page 34
24.
Gateway
Disable/ 000 000 000 000 – 255 255 255 255
(Disable)
Page 34
25.
DNS Server
Disable/ 000 000 000 000 – 255 255 255 255
(Disable)
Page 34
26.
Password
None or Up to 12 digits using 0 – 9, A – Z, a – z
None
Page 34
27.
Default
–
–
Page 25
NOTE:
• If the IP Address is set to "Auto", Subnet Mask, Gateway and DNS Server are not displayed in a preset menu.
21
ENGLISH
3. DEVICE OPERATION
(3) Detailed description of the Preset items
1. Finish mode (Finish Mode)
This feature allows you to decide what the DN-C640 will do after completing the playback of a track or file.
Set value
Description
Stop
Unit returns to stop mode after the track has played
Next
Unit advances to the next track and waits in Cue Mode
Recue
Continuous (default)
Unit returns to the beginning of the current track and waits in Cue Mode.
Unit plays the next track after finishing the previous track
2. Power on playback (Power On)
This feature allows you to decide the status of the unit after the TOC has been read or the DIR structure has been
identified.
Set value
Play
Stop (default)
Description
Unit starts to play after boot procedure is completed
Unit sits in stop mode after boot procedure is completed
3. Start mode (Start Mode)
This feature allows you to decide what the DN-C640 will do after a track is selected with the track search operation.
Set value
Play
Cue (default)
Stop
Processing
Inserting a new disc
Switching tracks or index points
Unit starts playback at the first track of
the disc
Unit starts to play the desired track or
index or file
Unit cues to the first track of the disc
Unit Cues to the selected track or index
or file
Unit sits in stop mode
Unit Cues to the selected track or index
or file
4. Cue mode (Cue Mode)
This feature allows you to decide what the DN-C640 will do when the CUE button is pressed.
Set value
Recue (default)
Next
Processing
Unit returns to the previously cued start position of the currently playing file
Unit cues to the next track
5. Auto Cue (Auto Cue)
This feature allows you to decide at what level of music the DN-C640’s Auto Cue feature will detect.
Set value
Processing
Auto Cue
Detecting level is less than
Off (default)
Off
---
–48dB
On
–48dB
–42dB
On
–42dB
–36dB
On
–36dB
NOTE:
• If an audio signal isn’t detected within the maximum period of time (20 seconds) then the DN-C640 will most likely Cue to
the beginning of index 01.
22
ENGLISH
3. DEVICE OPERATION
6. Fade in time (Fade In)
This feature allows you to adjust the length of time for the DN-C640’s Fade In feature
Processing
Set value
Fade in
Fade in time
Off (default)
Off
---
0.5sec – 10.0sec
(0.5second step)
On
0.5second – 10.0seconds
7. Fade out time (Fade Out)
This feature allows you to adjust the length of time for the DN-C640’s Fade Out feature.
Processing
Set value
Fade out
Fade out time
Off (default)
Off
---
0.5sec – 10.0sec
(0.5second step)
On
0.5second – 10.0seconds
8. Skip back time (Skip Back)
This feature allows you to set the amount of time that the DN-C640 will instantly replay when SKIP BACK is pressed on the
unit or IR control.
Processing
Set value
Skip Back time
1.0sec – 30.0sec (Default 10.0sec)
(0.5second step)
1.0second – 30.0seconds
9. End monitor time (End Monitor)
This feature allows you to set the amount of time at the end of the track that the DN-C640 will play when the END MON
button is pressed on the unit or IR control while in standby.
In the MP3 play mode, the time of monitor may not be correctly.
Processing
Set value
End Monitor time
5sec – 35sec (Default 10sec)
(5seconds step)
5seconds – 35seconds
10. End of message time (EndOfMessage)
This feature allows you to set the amount of time at the end of the track where the End of Message will be displayed. When
less then the user selected time is left at the end of the currently playing track, the time display will begin to flash until the
track has completed.
Processing
Set value
End of Message
End of Message time
Off
Off
---
0/ 5 /10 /15 /20 /30 /60sec
(Default 10sec)
On
0/ 5 /10 /15 /20 /30 /60seconds
11. Next track reserve (NextTrReserve)
This feature allows you to decide what the DN-C640 will do at the end of a track
Finish mode setting is “Stop”
Set value
Processing at the end of track
Cue at the playback stating position of index 01 of reserved
track
(Not reserved a next track): Stop
(Reserved a next track):
On (default)
Off
Stop
23
ENGLISH
3. DEVICE OPERATION
Finish mode setting is “Next”
Set value
Processing at the end of track
Cue at the playback stating position of index 01 of reserved
track
(Not reserved a next track): Cue at the beginning of index 01 of next track
(Reserved a next track):
On (default)
Off
Cue at the beginning of index 01 of next track
Finish mode setting is “Recue”
Set value
On (default)
Off
Processing at the end of track
(Reserved a next track):
Cue at the beginning of index 01 of reserved track
(Not reserved a next track): Cue at the playback starting position
Cue at the playback starting position
Finish mode setting is “Continuous”
Set value
Processing at the end of track
Start playback at index 01 of reserved track. If the reserved
track is next track of the current track, it will start playback at
index 00.
(Not reserved a next track): Start playback at index 00. If the current track is final track of
the disc, It will stop.
(Reserved a next track):
On (default)
Off
Start playback at index 00. If the current track is final track of the disc, It will stop.
12. Fader start mode (Fader Start)
This feature allows you to decide how the DN-C640 behaves when the Fader Start pins are short-circuited
Set value
Processing
Play
Unit starts playback when the remote fader pins (9-11) are short circuited and remains
playing when the pins open
Play-Pause (default)
Unit starts playback when the remote fader pins (9-11) are short circuited and pauses
playback when the pins open
13. Index tally (Index Tally)
This feature allows you to select the processing of INDEX tally pin (17) of the parallel control terminal.
Set value
Processing
Index2 (default)
Output index 2 tally signal to INDEX tally pin (17).
Index3
Output index 3 tally signal to INDEX tally pin (17).
14. Mono mode (Mono)
This feature allows you to force playback of stereo audio into a mono signal sent out both the L and R terminals
Set value
Off (default)
On
Processing
Output L and R original signals from the output terminals.
Output mixed L and R stereo signals from the output terminals.
15. Playlist playback mode (Play List)
This allows you to turn on or off the ability to play a playlist created in the Web Remote (See Page 32)
Set value
Off (default)
On
24
Processing
The playlist is ignored and normal playback is possible
The unit plays back according to the files designated in the playlist
ENGLISH
3. DEVICE OPERATION
16. Auto sleep mode (Auto Sleep)
You can select the behavior that the servo functions will automatically turn off if no operation is performed for set-up time
while in stop, pause or cue.
When in the sleep mode, if the PLAY/PAUSE button is pressed, playback will be started from the beginning of the track in
which the sleep mode was set. If the CUE button is pressed, it will standby for the beginning of the track in which the auto
sleep was set.
Set value
Off
30sec
10min
20min
30min(default)
Processing
Unit never goes into sleep mode
Unit will goes into sleep mode if no servo functions occur for longer than the userdesignated time
17. Eject lock mode (Eject Lock)
This feature allows you to prohibit ejecting a disc during playback
Set value
On (default)
Off
Processing
Unit will not allow anyone to eject a disc while in the Play Mode
Unit will allow a disc to be ejected while in the Play Mode
18. Digital output format (Digital Out)
This allows you to designate the Digital Output format that is sent to both the balanced and unbalanced digital output terminals.
Set value
Processing
Broadcast (default)
Unit outputs AES/EBU formatted digital audio signal to both the balanced DIGITAL
OUTPUT jack and the unbalanced DIGITAL OUTPUT jack
Consumer
Unit outputs S/PDIF formatted digital audio signal to both the balanced DIGITAL
OUTPUT jack and the unbalanced DIGITAL OUTPUT jack
19. Digital FS (Digital FS)
This feature allows you to set the sampling frequency of the digital audio signal that is sent out the DIGITAL AUDIO outputs.
Digital audio signal is outputted with below FS
Set value
Auto (default)
FS of the source audio signal
16 kHz
22.05 kHz
24 kHz
32 kHz
44.1 kHz
48 kHz
–
–
–
32 kHz
44.1 kHz
48 kHz
32kHz
32 kHz
32 kHz
32 kHz
32 kHz
32 kHz
32 kHz
44.1kHz
44.1 kHz
44.1 kHz
44.1 kHz
44.1 kHz
44.1 kHz
44.1 kHz
48kHz
48 kHz
48 kHz
48 kHz
48 kHz
48 kHz
48 kHz
20. Time Zone (Time Zone)
This feature allows you to select the Time zone. This setting is necessary to display the time correctly.
Value of the Time Zone should represent the differences between the UTC(GMT) and your local time.
NOTE:
• Turn the power off and on again to make the new settings effective.
Items 21-26 refer to the network operation of the unit. See page 34.
21. Machine name (Machine Name)
22. IP Address setting (IP Address)
23. Subnet mask setting (Subnet Mask)
24. Default Gateway setting (Gateway)
25. DNS server setting (DNS Server)
26. Network-Access Password setting (Password)
27. Default (Default)
Setting this feature allows you to reset all of the unit’s preset items to their default values.
25
ENGLISH
3. DEVICE OPERATION
UTILITY MENU
When you use the front panel for operation, press the SHIFT button in stop mode to enter shift mode (SHIFT button will light
Amber). Then press the MENU/STORE/UTILITY button to access the functions of the UTILITY MENU listed in the table below.
When you use the remote control unit for operation, press the UTILITY button to access the functions of the UTILITY MENU
listed in the table below.
N-C640
NETWORK
MENU/STORE
UTILITY
SHIFT
(1) Utility Menu Function Table
No
(Order)
Display
(Preset item)
Reference
Page 26
1.
Upload Disc
This feature copies all of the tracks or files on the loaded disc to the network shared
folder designated in the Web Remote. All the tracks on the disc are copied into a
new folder created in the shared folder. If the disc in the machine has a hierarchal
folder structure, that structure is also copied to the shared drive.
2.
Upload Track
This feature allows you to make a copy of a single selected track on the loaded
disc to the shared folder. The copy of the track is made in a new folder created in
the shared folder.
Page 26
3.
F/W Version
Displays the units FW version
Page 27
4.
Drive Version
Displays the units CD drive version
Page 27
5.
IP Address
Displays the units IP address
Page 27
[ Using the remote control unit ]
(2) Procedure for Upload Disc
1. While in stop and shift mode, press the UTILITY button.
[ Using the front panel ]
1. While in stop and shift mode, press the MENU/STORE/
UTILITY button.
CD PLAYER
Deseription
DN-C640
DISPLAY
NETWORK
A-
LOCK
END
CANCEL
SKIP
MENU/STORE
UTILITY
SHIFT
2. Turn the jog wheel until “Upload Disc” appears in the
display.
2. Press the 3 button or the 4 button until “Upload Disc”
appears in the display.
3. Press the ENTER button. The Display switches to
“Upload Disc OK?” and the “OK?” flashes.
4. Press the ENTER button. “Executing” will be displayed
until Upload Disc is finished. Then “Completed” will be
displayed.
Press the STOP button to cancel.
(3) Procedure for Upload Track
[ Using the front panel ]
1. While in stop or play-pause mode, press the SHIFT
button to light the shift button. Then press the MENU/
STORE/UTILITY button.
3. Press the jog wheel. The Display switches to “Upload
Disc OK?” and the “OK?” flashes.
4. Press the jog wheel. “Executing” will be displayed
until Upload Disc is finished. Then “Completed” will be
displayed.
5. Press the STOP/CANCEL button to cancel.
26
2. Turn the jog wheel until “Upload Track” appears in the
display.
3. Press the jog wheel. The Display switches to the track
number flashing.
4. Turn the jog wheel until the track number you want to
upload is flashing.
5. Press the jog wheel. “Executing” will be displayed
until Upload Track is finished. Then “Completed” will be
displayed.
• Display returns to step 4 so you can upload another
track.
ENGLISH
3. DEVICE OPERATION
(5) Procedure for Displaying the Unit’s
Drive Version
[ Using the front panel ]
1. While in stop and shift mode, press the MENU/STORE/
UTILITY button.
2. Turn the jog wheel until “Drive version” appear in the
display.
6. Press the STOP/CANCEL button to cancel.
[ Using the remote control unit ]
1. While in stop or play-pause mode, press the UTILITY
button.
2. Press the 3 button or the 4 button until “Upload Track”
appears in the display.
3. Press the ENTER button. The Display switches to the
track number flashing.
4. Press the 3 button or the 4 button until the track number
you want to upload is flashing.
5. Press the ENTER button. “Executing” will be displayed
until Upload Track is finished. Then “Completed” will be
displayed.
Display returns to step 4 so you can upload another
3. Press the jog wheel. The Display switches to the
firmware version.
4. Press the STOP/CANCEL button to cancel.
[ Using the remote control unit ]
1. While in stop mode, press the UTILITY button.
2. Press the 3 button or the 4 button until “Drive Version”
appear in the display.
3. Press the ENTER button. The Display switches to the
firmware version.
4. Press the STOP button to cancel.
6. Press the STOP button to cancel.
(4) Procedure for Displaying the Unit’s F/W
Version
(6) Procedure for Displaying the Unit’s IP
Address
[ Using the front panel ]
[ Using the front panel ]
1. While in stop and shift mode, press the MENU/STORE/
UTILITY button.
1. While in stop and shift mode, press the MENU/STORE/
UTILITY button.
2. Turn the jog wheel until “FW version” appear in the
display.
2. Turn the jog wheel until “IP Address” appear in the
display.
3. Press the jog wheel. The Display switches to the
firmware version.
3. Press the jog wheel. The display switches to the IP
address.
4. Press the STOP/CANCEL button to cancel.
4. Press the STOP/CANCEL button to cancel.
[ Using the remote control unit ]
[ Using the remote control unit ]
1. While in stop mode, press the UTILITY button.
1. While in stop mode, press the UTILITY button.
2. Press the 3 button or the 4 button until “F/W version”
appear in the display.
2. Press the 3 button or the 4 button until “IP Address”
appear in the display.
3. Press the ENTER button. The Display switches to the
firmware version.
3. Press the ENTER button. The Display switches to the IP
Address.
4. Press the STOP button to cancel.
4. Press the STOP button to cancel.
27
ENGLISH
4. NETWORK FUNCTIONALITY AND OPERATION
Network functionality and Operation
The network functionality of the Denon Professional DN-C640 allows you to play back compatible audio files from a shared network
resource or drive as well as provide you with a simple web-based user interface to control the DN-C640 over your network.
The DN-C640 has following functions.
1. Playing audio files from the network drive
The DN-C640 can play the audio files stored in a shared folder on a network computer.
2. Uploading audio files
The DN-C640 can make a copy of a file or files, or the entire disc to the shared folder. See Utility menu – Page 27.
3. Web remote control
The DN-C640’s internal Web GUI allows any internet ready computer on the network to have full control of the DN-C640’s
features. All features on the front panel and in the preset menu can be controlled by the unit’s web remote. Additionally, .m3u
style playlists can be built, downloaded or uploaded to the device from the web remote. See Web remote – Page 30.
How to hook up the DN-C640 to your network
Connect the DN-C640 to the network using the Ethernet RJ-45 terminal (LAN) on the rear of the unit.
You can connect the DN-C640 in any of the following ways:
• Through a corporate network
• Through a home network using a router or switch
• Directly to a computer using an Ethernet cross-over cable.
The DN-C640 supports the automatic acquisition of IP addresses from a DHCP server.
More often than not, you can connect your DN-C640 to a corporate network or home network in three easy steps:
1. Before connecting the DN-C640, set the preset setting of “IP Address“ to Auto (default).
It means that the DN-C640 will attempt to acquire the network settings from a DHCP server in the network.
2. Connect the DN-C640 to the network using the Ethernet RJ-45 terminal on the rear of the unit.
If you are not connected to a network, use a cross-over Ethernet cable to connect the unit directly to your computer.
3. Turn the unit on.
The DN-C640 automatically configures its network settings and communications with the network or computer without you
having to do anything further.
NOTE :
• If you set the preset setting of “IP Address” to Auto, use utility menu to find the IP address of the DN-C640 that is assigned
by a DHCP server automatically.
• If the DN-C640 can not find a DHCP server, when the DN-C640 is turned power on, it might take time to finish initializing.
• If you assign the network setting manually, at the first you should set the following preset setting of the DN-C640.
- IP address
- Subnet Mask
- Gateway
Set “DNS Server” setting if necessary.
NOTE
If you are not familiar with the network environment where you wish to connect your DN-C640, please contact your
network or IT official or administrator.
28
ENGLISH
4. NETWORK FUNCTIONALITY AND OPERATION
Setting up a Shared Folder on a Server or a Network Server
The DN-C640 can read and play audio files in a shared folder of a server or a network server.
1. Create a shared folder on a server.
2. Bring up the Web Remote on any network computer. See page 30.
3. Click Network settings tab.
4. Type the share name, the accessing user account and password in the textboxes of Network Shared Drive.
5. Click the
button.
6. The DN-C640 will reboot.
For detail of the Web remote, see page 30.
29
ENGLISH
5. CONTROL FEATURES
WEB REMOTE
The application “Web Remote” allows you to control the unit and configure settings from your computer. The DN-C640 supports
common web browsing software applications.
To connect to the DN-C640’s web remote, start up your web browser and specify the DN-C640’s IP address, for example,
“http://192.168.0.1/” to open the web control screen.
(1) Password screen
Open the web control screen and then type the password in the password window to gain access to the web remote. The
password window appears only when a password has been set in the preset menu. If no password has been set in the preset
menu then connecting to the web browser skips the password screen and connects directly to the Control window.
1. Type the password in the PASSWORD text box.
2. Click
30
button.
ENGLISH
5. CONTROL FEATURES
(2) Control screen
The Web remote screen contains four tabs; Control, Program, General Settings, and Network Settings. The Control window
contains controls of the DN-C640.
q
w
e
r
q Screen select tabs:
Control tab:
This screen allows you to control
the DN-C640 in the same way
as operating the front panel,
and displays the track or audio
file information of disc / shared
network drive, and the status of
the DN-C640.
Program tab:
The Program screen allows you
to create, upload, and download
.m3u type playlists.
General Setting tab: The General Setting screen
allows you to modify many of
the settings that are in the Preset
Menu.
Network Setting tab: The Network Setting screen
allows you to modify the network
settings that are in the Preset
menu. This is also where you can
designate the network shared
folder that the DN-C640 connects
to in NETWORK mode.
t
If the machine is in:
stop:
play:
pause:
cue:
end monitor:
search:
no disc:
sleep:
the other case:
w Track List:
Track number, file name and track time are displayed in
this area. In case of CD-DA “track” + [track number] is
displayed as the file name unless the disc is equipped
with CD-Text where the file name will appear in place of
“track” + [track number].
e Status indicator:
The status of the DN-C640 and the playback volume level
are displayed in this area.
r Control icon:
These buttons allow you to operate the DN-C640 in
same way as pressing front panel buttons or IR controller
buttons.
t KEY LOCK switch and SOURCE switch:
KEY LOCK switch:
SOURCE switch:
Locks the front panel buttons
Selects the source for playback
31
ENGLISH
5. CONTROL FEATURES
(3) Program screen
The Program screen allows you to make a program play settings, turn the program mode on or off, and create a playlist.. It also
allows you to download created playlists to your computer for future use as well as upload previously constructed playlists to the
device.
y
i
u
o
y Program switch:
Select ON to enter program play mode.
u Track List:
Track number and file name are displayed in this area. If you want to add any track to the program list (playlist), click the
ADD button on the right side the filename.
i Program List (Playlist):
The order of program play, track number and track time are displayed in this area. If you wish to edit it, click any of the buttons
on the right side as needed.
3 (Up) button:
Moves the corresponding file or track up in the playlist
4 (Down) button: Moves the corresponding file or track down in the playlist
(Delete) button: Removes the corresponding file or track from a playlist
o DOWNLOAD and UPLOAD buttons:
These allow you to download and upload a playlist for the DN-C640.
button: Downloads the current playlist stored in the DN-C640 to the shared folder as file “xxxxx.xxx”
button: Uploads a playlist stored in the shared folder named “xxxxx.xxx” to the DN-C640.
32
ENGLISH
5. CONTROL FEATURES
(4) General settings screen
The General settings screen allows you to modify many of the playback features found in the Preset Menu of the device. The
function of all of the settings are the same as found in the Preset Menu. See Page 21.
!0
!0 SAVE button, CANCEL button and DEFAULT buttons:
button: Stores all changes made to items in this window.
button: Cancels all changes made to items in this window and then displays the current settings.
button: Resets all items in this window to the factory default value.
33
ENGLISH
5. CONTROL FEATURES
(5) Network settings screen
The Network settings screen allows you to modify the network settings of the DN-C640 as well as designate the location and
sign-in information of the desired network shared folder. The function of all of the settings are the same as found in the Preset
Menu.
See page 20 about an operation of a preset menu. About detailed explanation of each network setting item, see below.
!1
!2
!3
!4
!5
!6
!1 Machine Name text box:
When in uploading audio files by an upload function, the DN-C640 upload audio files in a folder of this name under the shared
folder.
!2 Set IP Address control:
You must set the DN-C640’s network address here.
If you connect the DN-C640 to the server using DHCP, check the Automatically(DHCP/Auto IP) radio button. The value of IP
address, Subnet Mask, Default Gateway and DNS Server text boxes disappear.
If you assign the network settings manually, check the “Manually” radio button and type the your desired IP address, Subnet
Mask, Default Gateway and DNS Server text boxes.
!3 Password textbox:
If you want to have password security for access to the web remote, type password into Password textbox and Re-Enter
Password textbox.
!4 MAC Address indicator:
Displays the MAC address of the DN-C640.
!5 Network Shared Drive control:
You must set the shared drive (folder) information here.
Drive Name textbox: type the share name of the shared folder with full-pass. (Share name is generally same as a folder
name.)
Login User Name textbox: type a user account for accessing the shared folder.
Login Password textbox: type a user account password for accessing the shared folder. Same password should be typed into
Re-Enter Login Password textbox.
34
ENGLISH
5. CONTROL FEATURES
!6 Save and Restart, Cancel and Default buttons:
button: If any changes have been made to the network settings screen and need to be saved, press the SAVE
and RESTART button. This will store the changes made and forces the DN-C640 to reboot.
If the SAVE and RESTART button is pressed, a confirmation screen will appear.
If ok, click OK button and then the DN-C640 will shut down, and reboot.
While rebooting, the following is displayed on the screen.
button:
button:
Cancels all changes made to the network settings in this window and then display current settings.
Resets all network settings in this window to the factory default value. Then click
button
and reboot the DN-C640 to confirm the settings.
35
ENGLISH
5. CONTROL FEATURES
RS-232C CONTROL
Connect a male (D-Sub 9 Pin) to female (D-Sub 9 Pin) straight cable for RS-232C external control by host equipment.
• The RS-232C host can control functions of the DN-C640 externally
• The DN-C640 automatically transmits status data when status is changed.
• The DN-C640 will respond to status requests by transmitting the associated status data RS-232C specifications:
(1) Interface Condition
•
•
•
•
•
•
•
Applicable connector : 9-pin D-sub (male)
Baud rate : 9600 bps
Data Bit : 8bit
Parity : None
Stop bit : 1bit
Flow control : None
Pin layout
RS-232C
Pin No
Signal Name
1
Ground
6
NC
2
TxD
7
NC
3
RxD
8
NC
9
NC
4
NC
5
S. Ground
(2) Control command codes
The control command packets have a data length of 7 bytes or more. ASCII codes from 0x00 to 0x7F are used to receive serial
data. At the transmission end, take steps to convert the ASCII codes into HEX data to set the data in the data
packets. CR (0x0D) is added as the data packet delimiter.
Example: Control command code for number 5 (ASCII code @02005CR)
When transmitting commands consecutively, put more than 100ms blank between commands.
@
0
2
0
0
5
CR
0 × 40
0 × 30
0 × 32
0 × 30
0 × 30
0 × 35
0 × 0d
(3) Status Request and Status Information codes
The status data packets have a data length of 7 bytes or more.
ASCII codes from 0 × 00 to 0 × 7f are used to transmit serial data. For this reason, the ASCII codes are converted into HEX data
before the data is set in the data packets and transmitted. CR (0 × 0d) is added as the data packet delimiter.
Example: Status Information code “Disc In” (ASCII code @0 CDCI CR)
36
@
0
C
D
C
I
CR
0 × 40
0 × 30
0 × 43
0 × 44
0 × 43
0 × 49
0 × 0d
ENGLISH
5. CONTROL FEATURES
(4) Table of Control command codes
Code
Command
“@02000”+CR
0
“@02001”+CR
1
“@02002”+CR
2
“@02003”+CR
3
“@02004”+CR
4
“@02005”+CR
5
“@02006”+CR
6
“@02007”+CR
7
“@02008”+CR
8
“@02009”+CR
9
“@02011”+CR
DISPLAY
“@02012”+CR
Power Standby
“@020PW”+CR
Power On
“@02016”+CR
Volume Up
“@02017”+CR
Volume Down
“@02028ON”+CR
RANDOM ON
“@02028OF”+CR
RANDOM OFF
“@02029ON”+CR
REPEAT ON
“@02029OF”+CR
REPEAT OFF
“@02032”+CR
Track Jump §
“@02033”+CR
Track Jump ∞
“@02034”+CR
INDEX +
“@02035”+CR
INDEX –
“@02037ON”+CR
PITCH ON
“@02037OF”+CR
PITCH OFF
“@02038”+CR
PTICH +
“@02039”+CR
PITCH –
“@02045”+CR
EJECT
“@02048”+CR
PAUSE
“@02050”+CR
F. REVERSE
“@02052”+CR
F. FORWARD
“@02053”+CR
PLAY
“@02054”+CR
STOP
“@02059”+CR
A-B
“@020CU”+CR
CUE
“@020EM”+CR
END MON
“@020SB”+CR
SKIP BACK
“@020NWON”+CR
NETWORK ON
“@020NWOF”+CR
NETWORK OFF
“@020UPALL”+CR
UPLOAD DISC
“@020UPXXX”+CR
UPLOAD TRACKXXX
“@020KL”+CR
Lock Panel's Key
Comment
XXX is Track Number
37
ENGLISH
5. CONTROL FEATURES
Code
“@020KU”+CR
38
Command
Comment
Unlock Panel's Key
“@020DJXXXXXXXXXXXX”+CR
Direct Jump XXXXXXXXXXXX=ttthhhmmssff
“@0FMST”+CR
Finish Mode - Stop
“@0FMNT”+CR
Finish Mode -Next
“@0FMRC”+CR
Finish Mode - Recue
“@0FMCT”+CR
Finish Mode - Continuous
“@0POPL”+CR
Power On - Play
“@0POST”+CR
Power On - Stop
“@0SAPL”+CR
Start Mode Play
“@0SACU”+CR
Start Mode Cue
“@0SAST”+CR
Start Mode Stop
“@0CURC”+CR
Cue Mode Recue
“@0CUNT”+CR
Cue Mode Next
“@0AC00”+CR
Auto Cue - OFF
“@0AC48”+CR
Auto Cue - – 48dB
“@0AC42”+CR
Auto Cue - – 42dB
“@0AC36”+CR
Auto Cue - – 36dB
“@0FIXXX”+CR
Fade In - 000:OFF, 005:0.5sec, 010:1.0sec, ··· 100:10.0sec
“@0FOXXX”+CR
Fade Out - 000:OFF, 005:0.5sec, 010:1.0sec, ··· 100:10.0sec
“@0SBXXX”+CR
SkipBack - 010:1.0sec, 015:1.5sec, ··· 300:30.0sec
“@0EMXX”+CR
End Mon - 05:5sec, 10:10sec, 15:15sec, ··· 35:35sec
“@0EDXX”+CR
EOM - OF:OFF, 05:5sec, 10:10sec, 15:15sec, 20:20sec,
30:30sec, 60:60sec
“@0NRXX”+CR
Next Reserve - 00:ON, 01:OFF
“@0FDPL”+CR
Fader Start -Play
“@0FDPU”+CR
Fader Start -PlayPause
“@0ITI2”+CR
Index Tally Index2
“@0ITI3”+CR
Index Tally Index3
“@0MOXX”+CR
Mono - 00:ON, 01:OFF
“@0PLXX”+CR
PlayList - 00:ON, 01:OFF
“@0ASXXXX”+CR
Sleep-0000:OFF,0030:0.5min,1000:10min, 2000:20min,
3000:30min
“@0ELXX”+CR
Eject Lock - 00:ON, 01:OFF
“@0DOBC”+CR
Digital Out - Broadcast
“@0DOCS”+CR
Digital Out - Consumer
“@0DFXX”+CR
Digital FS - AT:Auto, 32:32kHz, 44:44.1kHz, 48:48kHz
“@0MNXXXXXXXXXXXX”+CR
Machine Name - 0..9, AtoZ, atoz
“@0IPXXXXXXXXXXXX”+CR
IP Address - 0..9, AUTO00000000:Auto
“@0SMXXXXXXXXXXXX”+CR
Subnet Mask - 0..9
“@0GWXXXXXXXXXXXX”+CR
Gateway - 0..9, DISABLE00000:Disable
“@0DNXXXXXXXXXXXX”+CR
DNS Address - 0..9, DISABLE00000:Disable
“@0PDXXXXXXXXXXXX”+CR
Password - 0..9, A to Z, a to z
“@0DEFL”+CR
General Preset Default
“@0DENW”+CR
Network Preset Default
ttt is Track Number
Max 12 characters
Max 12 characters
ENGLISH
5. CONTROL FEATURES
(5) Table of Status Request and Status information codes
When a Status Request Command from the host is received by the DN-C640, the DN-C640 sends the Status Information to the
host. When the DN-C640 changes status, the DN-C640 automatically sends Status Information to the host.
Mode
Power Mode
Disc
Request Code
Status
“@0?PW”+CR
“@0?CD”+CR
Status
“@0?ST”+CR
Stop
Play
Other
Time Mode
“@0?TM”+CR
Time Mode
On
“@0PW00”+CR
Standby
“@0PW01”+CR
Off
–
No Disc
“@0CDNC”+CR
Loading
“@0CDRE”+CR
Disc In
“@0CDCI”+CR
Network
“@0CDNW”+CR
Executing
“@0CDEX”+CR
DiscError(Unformat)
“@0CDCE”+CR
Stop
“@0STST”+CR
Cue
“@0STCU”+CR
Sleep
“@0STSL”+CR
Playback
“@0STPL”+CR
Playback Pause
“@0STPP”+CR
FF
“@0STFF”+CR
RWD
“@0STRW”+CR
END MON
“@0STEM”+CR
Ulitity / Preset
“@0STED”+CR
Operation Error
“@0STER”+CR
TotalDiscTime
“@0TMTD”+CR
Track Elapse Time
“@0TMTT”+CR
Track Remain Time
“@0TMTR”+CR
File Name
“@0TMFN”+CR
File Information
“@0TMFI”+CR
Recorded Date
“@0TMRD”+CR
Recorded Time
“@0TMRT”+CR
Recorded Channel
“@0TMCH”+CR
Track Number
“@0?TR”+CR
Track Number
“@0TRXXX”+CR
Display Time
“@0?TI”+CR
Time
“@0TIhhhmmssff”+CR
Volume
“@0?VM”+CR
Volume
“@0VMXXX”+CR
Pitch
“@0?PT”+CR
Pitch
“@0PTXXXX”+CR
Text Title
“@0?T1”+CR
Text Title
“@0T1XXX...”+CR ✽1
Text Artist
“@0?T2”+CR
Text Artist
“@0T2XXX...”+CR ✽1
Text Album
“@0?T3”+CR
Text Album
“@0T3XXX...”+CR ✽1
POS Code
“@0?C1”+CR
POS Code
“@C1XXXXXXXXXXXXX”+CR
ISRC Code
“@0?C1”+CR
ISRC Code
“@C2XXXXXXXXXXXX”+CR
✽1:
0 to 255 digits
39
ENGLISH
5. CONTROL FEATURES
Mode
Finish Mode
Power On
Start Mode
“@0?FM”+CR
“@0?PO”+CR
“@0?SA”+CR
Cue Mode
“@0?CU”+CR
Auto Cue
“@0?AC”+CR
Status
Stop
“@0FMST”+CR
Next
“@0FMNT”+CR
Recue
“@0FMRC”+CR
Continuous
“@0FMCT”+CR
Play
“@0POPL”+CR
Stop
“@0POST”+CR
Play
“@0SAPL”+CR
Cue
“@0SACU”+CR
Stop
“@0SAST”+CR
Recue
“@0CURC”+CR
Next
“@0CUNT”+CR
Off
“@0AC00”+CR
–48dB
“@0AC48”+CR
–42dB
“@0AC42”+CR
–36dB
“@0AC36”+CR
Fade In
“@0?FI”+CR
Time
“@0FIXXX”+CR
Fade Out
“@0?FO”+CR
Time
“@0FOXXX”+CR
Skip Back
“@0?SB”+CR
Time
“@0SBXXX”+CR
End Mon
“@0?EM”+CR
Time
“@0EMXX”+CR
End Of Message
“@0?ED”+CR
Time
“@0EDXX”+CR
Next Tr Reserve
“@0?NR”+CR
On
“@0NR00”+CR
Off
“@0NR01”+CR
Fader Start
“@0?FD”+CR
Play
“@0FDPL”+CR
PlayPause
“@0FDPU”+CR
Index2
“@0ITI2”+CR
Index3
“@0ITI3”+CR
Index Tally
Mono
40
Request Code
“@0?IT”+CR
“@0?MO”+CR
On
“@0MO00”+CR
Off
“@0MO01”+CR
On
“@0PL00”+CR
PlayList
“@0?PL”+CR
Off
“@0PL01”+CR
Sleep
“@0?AS”+CR
Time
“@0ASXXXX”+CR
Eject Lock
“@0?EL”+CR
On
“@0EL00”+CR
Off
“@0EL01”+CR
Digital Out
“@0?DO”+CR
Broadcast
“@0DOBC”+CR
Consumer
“@0DOCS”+CR
Digital FS
“@0?DF”+CR
FS
“@0DFXX”+CR
Machine Name
“@0?MN”+CR
Name ✽2
“@0MNXXXXXXXXXXXX”+CR
IP address
“@0?IP”+CR
Address
“@0IPXXXXXXXXXXXX”+CR
Subnet Mask
“@0?SM”+CR
Mask Bit
“@0SMXXXXXXXXXXXX”+CR
Gateway
“@0?GW”+CR
Address
“@0GWXXXXXXXXXXXX”+CR
DNS Address
“@0?DN”+CR
Address
“@0DNXXXXXXXXXXXX”+CR
Password
“@0?PD”+CR
Password ✽2
“@0PDXXXXXXXXXXXX”+CR
✽2:
0 to 12 digits
ENGLISH
5. CONTROL FEATURES
GPIO (Parallel) CONTROL
Use this to control the DN-C640 with dry contact circuit connections.
(1) Interface Condition
• Applicable connector: 25-pin D-sub (male)
• Connecting signal layout
Pin No.
1
14
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22
10
23
11
24
12
25
13
Signal Name
FG
I/O
–
PLAY tally
O
PLAY command
I
PAUSE tally
O
PAUSE command
I
CUE tally
O
CUE command
I
INDEX2/INDEX3
O
TRACK (+) command
I
Reserved
–
TRACK (–) command
I
Reserved
–
SEARCH (Fwd) command
I
Reserved
–
SEARCH(Rev) command
I
Reserved
–
FADER START command
I
Tally power supply
–
Command common
–
Command common
–
NC
–
EOM tally
O
Reserved
–
Reserved
–
Reserved
–
NOTE:
• The tally output pin has open collector IC specifications (Imax. 48mA, Vmax. 5.5V).
• The tally input pin has LVTTL IC specifications (Vcc 3.3V).
• Maximum current for Tally power supply (Pin 22) is 100mA.
41
ENGLISH
5. CONTROL FEATURES
(2) Remote control circuit
CUE
9
10
8
7
6
5
4
3
PAUSE
24
23
22
18
17
16
14
9
23
5
6
2
23
FADER SWITCH
15
TRACK (+)
1
TRACK (–)
23
• Remote control connections
PLAY
2
14
22
23
3
15
17
22
INDEX2/INDEX3
24
22
EOM
22
23
4
16
22
23
7
23
8
23
1 SEARCH ¡
NOTE:
• The rating of REMOTE connector pin 22 (TALLY POWER SUPPLY) is +5 VDC, 100 mA maximum.
Avoid currents in excess of the rating, or it may cause a malfunction or a risk of fire.
42
ENGLISH
6. TROUBLESHOOTING
Make sure of the followings before you consider as any malfunctions :
1. Are all the connections correct?
2. Are all system components being operated correctly in accordance with the operating instructions?
3. Are the speakers and amplifier/receiver functioning correctly?
If the Unit still does not function properly, check the symptom against the list below. If the symptom does not correspond to the
check list, please contact your dealer.
Problem
Disc is not ejected.
Cause
Remedy
• Power operation switch is not turned • Turn the power operation switch on.
on.
When a disc is loaded, “TOC Error” or • Disc is not properly loaded.
"No Disc" is displayed.
• Reload the disc.
When a disc is loaded, “Disc Error” is • The disc is not properly recorded.
displayed.
• Turn the power off and on again to eject
the disc.
When the PLAY button is pressed, • Disc is dirty or scratched.
playback does not start.
• Clean the disc.
There is no sound, or it is distorted.
• Output cord is not properly connected. • Connect the output cord properly.
• Amplifier adjustment is inappropriate.
• Readjust the amplifier.
A specific section of the disc will not • Disc is dirty or scratched.
play.
• Clean the disc.
Program play does not work.
• Program play operation has been performed • Restart Program play.
improperly.
Remote control is not working.
• No batteries or flat batteries.
• Ensure that batteries are correctly
inserted.
• Replace the batteries with a flesh set.
File does not play.
• Decoding Error.
• Check that the file you are trying to play
has a supported file extension and is a
format that the DN-C640 supports.
Network is not working.
• Network type is wrong.
• Network settings are incorrect.
• Network cable is not plugged in.
• Ensure that you have selected the
correct network type.
• Check your network settings.
• Check the network cable is correctly
plugged in on both the DN-C640 and
your network switch.
43
ENGLISH
7. SPECIFICATIONS
■ GENERAL
Disc type :
Standard compact discs (12 cm and 8 cm)
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW
■ AUDIO SECTION
Audio channel :
Frequency response :
Dynamic range :
Signal-to-noise Ratio :
Channel separation :
Total Harmonic Distortion :
Analog output :
Unbalanced output (RCA) :
Variable range(VARIABLE) :
Balanced output (XLR) :
Variable range :
Digital output :
Unbalanced output (RCA) :
Balanced output (XLR) :
Signal Format :
Headphone Output :
Variable Pitch Control :
Frame Search Accuracy :
2 channel stereo
10 to 20,000Hz ± 1.0 dB
98 dB
104 dB (1kHz, 0 dB playback, A filter)
96 dB (1kHz, 0 dB playback, A filter)
0.004 % (1kHz, 0 dB playback, A filter)
2.0 Vrms at 0 dB disc, 10 kohms
4.0 Vrms at 0dB disc, volume max.
+18 dBu at 0 dB disc, 600 ohms
+24 dBu to +0 dBu at 0 dB disc
0.5 Vp-p, 75 ohms
3.5 Vp-p, 110 ohms
SPDIF or IEC-958 Type II /AES EBU selectable
20 mW, 33 ohms
±12 % max.
1/75 second
■ SIGNAL SYSTEM
Sampling Frequency:
Quantization :
44.1 kHz at Normal Pitch
16-bit Linear
■ REMOTE CONTROL
Ethernet (LAN) :
Serial remote :
Parallel remote :
IR control input :
RJ-45, 10BASE-T/100BASE-TX automatic selection
RS232C, D-Sub 9-pin
D-Sub 25-pin
IR sensor
■ POWER SUPPLY
U.S.A. & Canada models :
European, U.K. and Asia/Pacific models :
Power Consumption :
120 V AC ±10 %, 60 Hz
230 V AC ±10 %, 50 Hz
25 W (U.S.A. & Canada models)
25 W (European, U.K. and Asia/Pacific models)
■ CABINET, etc.
Installation :
Maximum Dimensions :
Weight :
19-inch 1U rack space
482.6 (W) × 44 (H) × 325 (D)mm
19” (W) × 1.7” (H) × 12.8” (D)
4.3 kg, 9.5 lbs
■ ENVIRMENTAL CONDITIONS
Operating temperature :
Operating humidity :
Storage temperature :
Storage humidity :
44
+5°C to +35°C
25% to 85%, non condensing
–20°C to +60°C
25% to 85%, non condensing
ENGLISH
7. SPECIFICATIONS
■ DIMENSIONS
325mm (12.8”)
347mm (13.7”)
44mm
(1.7”)
52mm
(2.0”)
434mm (17.1”)
482.6mm (19.0”)
NETWORK CD PLAYER
0
DN-C640
10
DISPLAY
A-B
PITCH
LOCK
END MON
TEXT
- INDEX/DIR +
PUSH
ENTER
LEVEL
EJECT
NETWORK
MENU/STORE
CUE
POWER ON/OFF
PHONES
UTILITY
SHIFT
CANCEL
SKIP BACK
PLAY/PAUSE
PITCH
✽ For improvement purposes, specifications and design are subject to change without notice.
45
D&M Holdings Inc.
PROFESSIONAL BUSINESS COMPANY
Printed in Japan
01/2007 00M43BS851252 ecmf-g