Denon DN-C680 CD Player User Manual

CD PLAYER
DN-C680
OPERATING INSTRUCTIONS
IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
LABELS
(for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J
APPLICABLE AT DATE OF MANUFACTURE.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or deformed,
it may cause electric shock or malfunction when used. When removing from
wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON dealer.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the CD player.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial number of your set shown on the rating label.
Model No. C-680
Serial No.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
NOTE:
This unit may cause interference to radio and television reception if you do not operate
it in strict accordance with this OPERATING INSTRUCTIONS.
This unit complies with Class B computing device rules in accordance with the
specifications in Sub-part J or Part 15 of the FCC Rules, which are designed to provide
reasonable protection against such interference in a residential installation. If the unit
does cause interference to any radio or television reception, try to reduce it by one or
more of the following means:
a)
Turn the other unit to improve reception
b)
Move this unit
c)
Move this unit away from others
d)
Plug this unit respectively into a different AC outlet
• This is note to accordance with Section 15.838 of the FCC Rules.
CLASS 1 LASER PRODUCT
NOTE:
This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 5°C (41 °F) - 35°C (95°F).
2
DENON SERVICE NETWORK
Please contact one of our overseas service centers, listed below, for follow-up service consultation.
Wenden Sie sich für anfallende Wartungs-bzw. Reparaturarbeiten bitte an eine der folgend aufgeführten Kundendienststellen.
Adressez-vous à nos centres de service d’outre-mer indiqués ci-dessous, pour le service aprèsvente.
Per il servizio dopo vendita rivolgete Vi al nostro centro di servizio estero appropriato della lista seguente.
Para consultas de servicio porfavor dírigirse a cualquiera de nuestros centros de servicio en el extranjero, enlistados abajo.
Neem kontakt op met één van onze reparatie-inrichtingen in het buitenland, waarvan hier een lijst volgt, voor na-service.
Ta kontakt med nedan angivna servicecentraler för rådfrågning om servicearbeten efter försäljningen.
Favor contactar um de nossos centros de serviços internacionais, abaixo listados, para consulta de serviços de acompanhamento.
Australia
Austria
Belgium
Canada
China
Czecho
Denmark
Finland
France
F.R. Germany
Greece
Hong Kong
Iceland
Indonesia
Italy
Korea
Malaysia
Mexico
Netherlands
New Zealand
Norway
Poland
Portugal
Singapore
Spain
Sweden
Switzerland
Taiwan R.O.C.
Thailand
United
Kingdom & Eire
U.S.A.
AWA Audio Products Pty Ltd. 67 O’Riordan Street, Alexandria NSW 2015, Australia
Tel: (02) 9669-3477 Fax: (02) 9578-0140
Digital-Professional-Audio Vertriebsges.m.b.H., 1170 Wien, Rupertusplatz 3
Tel: 0222-4501006~9, Fax: 0222-457679
Transtel-Sabima P.V.B.A. Harmoniestraat 13, 2018 Antwerpen 1, België Tel: 03-237-3607
Denon Canada Inc. 17 Denison Street, Markham Ontario, Canada L3R 1B5 Tel: 905-475-4085 Fax: 905-475-4159
Shanghai Denon Products Service Co., Ltd. Room 1504, A Building 527 Huaihai Zhong Road,
Shanghai 200020, P.R.C. Tel: (021)53062078
EUROSTAR OSTORAVA s.r.o. Za Vokovikou vozovnou 369/5, 161 00 Praha 6
Tel: 2-316-3690 Fax: 2-316-6852
Hifi Klubben A/S Dali Alle 1, 9610 Noerager, Denmark Tel: 45-96 72 10 00 Fax: 45-96 72 10 14
Suomen Hi-Fi Klubi OY Nylandsgatan 4-6, Helsingfors Tel: 0644401
Denon France S.A. 3 Boulevard Ney, 75018 Paris Tel: 44-89-68-69
Denon Electronic GmbH Halskestraße 32, 40880 Ratingen Tel: 02102-4985-0
KINOTECHNIKI LTD. 47 Stournara Str., Athens Tel: 380-6998
Denon Hong Kong Ltd., 11/F North, Somerset House 979 King’s Road, Quarry Bay, Hong Kong
Tel: 2516-6862, Fax: 2516-5940
Japis Ltd. Brautarholt 2, Box 396, 121 Reykjavik, Iceland Tel: 5625200
PT Autoaccindo Jaya. Cideng Barat No. 7 Jakarta, Indonesia Tel: 633-2730
Professional Equipment srl. 20142 Milano v.le Famagosta 37, Italy Tel: 02-89.10.241 Fax:02-81.38.032
DAIYOUNG Industrial Co.,Ltd. 1027-5, Bangbae-dong, Seocho-gu, Seoul 137-060 Korea
Tel: 02-588-3960 Fax: 02-586-3721
Pertama Audio (PJ) Sdn. Bhd. 38, 40 & 42 Jalan PJS 11/28A Sunway Metro Bandar Sunway 46510
Selangor, Malaysia Tel: 03-7378888 Fax: 03-7378188
Labrador, S.A. de C.V. Zamora No. 154 Col. Condesa 06140 Mexico, D.F. Tel: 286 55 09 Fax: 286 34 62
Penhold B.V. Poppenbouwing 58, NL-4191 NZ Geldermalsen, Netherland Tel: 31-345-588 080 Fax: 31-345-588 085
Avalon Audio Corpn. Limited 119 Wellesley Street, Auckland 1, New Zealand Tel: 09-779-351, 09-775-370
Hi-Fi Klubben Box 70 Ankertorget, 0133 Oslo 1 Tel: 02-112218
HORN DISTRIBUTION ul. Nowoursynowska 131R (wjazd od ul. Rosota) 02-975 Warszawa
Tel: 22-649-3071 Fax: 22-649-3199
Videoacustica Qta. Do Paizinho-Armazém 5-Estrada De Circunvalação-Apart. 3127 1303 Lisboa Codex
Tel: 2187004/2187096
Denon Electronics Singapore Pte Ltd. 257 Selegie Road #03-257 Selegie Complex
Singapore 188350 Tel: 65-339-1181 Fax: 65-339-8366
Gaplasa S.A. Conde de Torroja, 25, 28022 Madrid Tel: 91-329-42-63
Sveriges Hi-Fi Klubb Box 5116, S-402 23 Göteborg Tel: 031-200040
Diethelm & Co., AG. Grindelstrasse 5, 8303 Bassersdorf Tel: 01-838-1611
Taiwan Kolin Co., Ltd. 10th Fl., 86, Sec. 1, Chung-king S. Rd., Taipei, Taiwan R.O.C.
Tel: (02) 314-3151 (20 Lines) Fax: (886) 02-3614037 Telex: 11102 TKOLIN
WARNING:
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or
deformed, it may cause electric shock or malfunction when used. When
removing from wall outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON dealer.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the CD player.
Electric shock or malfunction may result.
DN - C630
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
INSTRUCCIONES DE OPERACION
BRUKSANVISNING
Please, record and retain the Model name and serial number of your set
shown on the rating label.
Model No. DN-C630
Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
• FOR U.S.A. & CANADA MODEL ONLY
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR
SUBCHAPTER JAPPLICABLE AT DATE OF MANUFACTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions : (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
POWER
OPEN / CLOSE
TRACK
PHONES
If there is no service center in your local area, consult the outlet where the equipment was purchased.
Falls sich in Ihrer Nähe keine Kundendienststelle befindet, wenden Sie sich an das Geschäft, wo das Gerät gekauft wurde.
S’il n’y a aucun centre de service dans votre région, consultez votre revendeur.
Se nella Vostra zona non c’è il centro di servizio, rivolgete Vi al negozio dove avete acquistato l’apparecchio.
Si no hay centros de servicio en su área local, consulte en donde haya comprado su equipo.
Als er in uw streek geen reparatie-inrichting is, neemt u kontakt op met de vestiging waar u de apparatuur gekocht heeft.
Saknas servicecentral i närheten där du bor, bör kontakt tas medåterförsäljaren för apparaten.
Se não existir um centro de serviços em sua área local, consulte o estabelecimento onde o equipamento foi adquirido.
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
COMPACT DISC PLAYER DN-C630
LEVEL
STOP
CUE
TIME
REPEAT
PLAY
MODE
SINGLE
0%
END MON
INDEX
MIN
REPEAT
A-B
PROG.PLAY
ON / OFF
PROG. IN
PITCH
PLAY / PAUSE
1.
Read Instructions – All the safety and operating
instructions should be read before the applicance is
operated.
2.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
3.
12.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
Heed Warning – All warnings on the applicance and in the
operating instructions should be adhered to.
14.
Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
4.
Following Instructions – All opeerating and use instructions
should be followed.
15.
Power Lines – An outdoor antenna should be located away
from power lines.
5.
Water and Moisture – The appliance should not be used
near water – for example, near a bathtub, washbbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
16.
6.
Carts and Stands – The appliance should be used only with
a cart or stand that is recommended by the manufacturer.
6A.
An appliance and cart
combination should be
moved with care.
Quick stops, excessive
force, and uneven
surfaces may cause
the applicance and cart
combination to overturn.
Outdoor Antenna Grounding – If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna-discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
See Figure A.
17.
Nonuse Periods – The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
7.
Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
18.
Object and Liquid Entry – Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
8.
Ventilation – The appliance should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
19.
Damage Requiring Service – The appliance should be
serviced by qualified service personnel when:
CLASS 1
,,
LASER PRODUCT
ADVARSEL:
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.
VARNING–
OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I
DENNA
BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM
ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
CAUTION
Mahajak Development Co., Ltd. 6th Fl., Mahajak Building, 46 Sukhumvit 3 (Nananua), Klongteoy,
Prakranong, Bangkok 10110 Tel: 256-0020
Hayden Laboratories Ltd. Hayden House, Chiltern Hill, Chalfont St.
Peter Gerrards Cross, Bucks, SL9 9UG Tel: 01753-888447
DENON ELECTRONICS, a Division of Deonon Corporation (U.S.A.) 222 New Road Parsippany,
NJ07054, U.S.A., Tel: 973-575-7810, Fax: 973-575-1213
SEARCH
*
*
*
*
*
*
*
*
*
CERTIFICATION
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CD PLAYER
SAFETY INSTRUCTIONS
LABELS (for U.S.A. model only)
,,
•
•
•
•
•
•
•
•
IMPORTANT TO SAFETY
9.
Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
10.
Power Sources – The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11.
Grounding or Polarization – Precautions should be taken so
that the grounding or polarization means of an appliance is
not defeated.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
• POUR LES MODELES AMERICAINS ET CANADIENS
UNIQUEMENT
MAX
PRESET
14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN
Telephone: (03) 3584-8111
Cable: NIPPON COLUMBIA TOKYO Telex: JAPANOLA J22591
Printed in Japan 511 3345 000
808
PAGE
SEITE
PAGE
PAGINA
SIDA
007 ~ PAGE
026 ~ SEITE
046 ~ PAGE
066 ~ PAGINA
086 ~ SIDA
025
045
065
085
105
ELECTRIC
SERVICE
EQUIPMENT
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
20.
Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
ANTENNA
LEAD IN
WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NOTE:
This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 5 °C (41 °F) – 35
°C (95 °F).
1
C. The appliance has been exposed to rain; or
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER
CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE
DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES
LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
FOR ENGLISH READERS
FÜR DEUTSCHE LESER
POUR LES LECTEURS FRANCAIS
PARA LECTORES DE ESPAÑOL
FÖR SVENSKA LÄSARE
B. Objects have fallen, or liquid has been spilled into the
appliance; or
GROUND
CLAMP
ATTENTION
G80801
A. The power-supply cord or the plug has been damaged;
or
NEC - NATIONAL ELECTRICAL CODE
2
3
FRONT PANEL
REAR PANEL
DIMENSIONS
DISPLAY WINDOW
4
5
NOTE ON USE
Keep the set free from moisture,
water, and dust.
Do not let foreign objects in the set.
Avoid high temperatures
Allow for sufficient heat dispersion
when installed on a rack.
Unplug the power cord when not
using the set for long periods of time.
Do not let insecticides, benzene, and
thinner come in contact with the set.
Handle the power cord carefully. Hold
the plug when unplugging the cord.
"(For sets with ventilation holes)
Do not obstruct the ventilation holes.
Never disassemble or modify the set
in any way.
6
MAIN FEATURES
The DN-C680 CD player is a rack mount type CD player designed for use in broadcast stations, for production; etc.
•
•
•
•
19 inch Rack Mountable (Height 3U)
Large FL Display, Illuminated Rubber Button
Track Search Select knob (Easy track selection)
Jog/ Shuttle Wheel
•
Program Play (Max. 25 tracks)
Perform searches to 1 frame precision using the jog dial and easy scans using the shuttle ring.
(1) When the PLAY mode is set to Single, the player stands by at the beginning of next track. (at Finish mode Next)
(2) When the PLAY mode is set to Continuous, the playback is continued according to your programmed sequence.
•
Play mode and Finish mode
(1) Play mode
cContinuous: Play a whole disc
dSingle: Play a track
e A-B: Play a A-B
•
(2) Finish mode (Stop, Next, Recue)
* only when Single Track play is selected.
Stop: Stop after finishing to play a track.
Next: Standby at the beginning of next track after finishing to play track.
Recue: After finishing to play a track, standby at the beginning of the track.
c
d
e
Auto Cue
After a disc is loaded, it is automatically cued to the point where audio starts. Cueing takes place at the point where audio starts rather than where the track
starts. The level at which sound is first detected can be set between -36 to -72dB (7 steps).
•
End Monitor
Pressing the END MON button during standby instantly previews the end of the track, thus assuring perfect "end point". The point at which monitoring starts can
be set within a range of 5 to 35 seconds (7 steps) prior to the track's end.
•
End of Message (EOM)
At the end of a track, the Display's EOM button flashes, providing a visual warning to the operator that the track will end shortly. The point at which the flashing
begins can be set within a range of 0 to 30 seconds (7 steps) prior to the end of the track.
•
Pitch Control (t 9.9%, 0.1 % step) e Index Search
•
AUTO SPACE
The Select knob can be used to perform an Index Search when the INDEX button is ON. (The LED on the INDEX button light up.)
During playback, it is possible to insert a silent space of about 4 seconds between tracks. To do this, simply press the AUTO SPACE button to ON.
(The LED on the AUTO SPACE button light up.)
•
AUTO EDIT
•
Display of Playback Locations
•
Rich Array of External Control Terminals
•
ACD-25FSC (FS Converter Kit) Option
This function automatically divides the total recorded time on the disc in half and rearranges the track so that they fit nearly onto the A and B sides.
A bar graph display indicates playback points on the track being played. Elapsed time and Remaining time displays are switched using the TIME button.
Serial Remote (RS232C/RS422A switchable, D-sub 9 pin) Parallel Remote (D-sub 25 pin)
Digital output is possible at 32 and 48 kHz as well as 44.1 kHz. Output frequency can be preset to 32, 44.1, or 48 kHz.
7
CONTENTS
1.
PART NAMES AND FUNCTIONS ................................................. 9~11
6.
(1) Front Panel .......................................................................... 9,10
(1) Inputting the Program ............................................................ 19
(2) Rear Panel ......................................................................... 10,11
(2) Changing the Program ........................................................19, 20
(3) Display ................................................................................... 11
(3) Playing Programs ................................................................... 20
2.
REMOTE CONTROL CONNECTION ................................................... 12
3.
OPENING AND CLOSING THE DISC HOLDER AND
(4) Presetting Programs ................................................................ 21
7.
LOADING DISCS ........................................................................... 12
4.
5.
PROGRAMMED PLAYBACK ........................................................ 19~21
PRESET FUNCTIONS AND OPERATIONS .................................. 22~25
(1) List of Preset Functions ........................................................... 22
BASIC OPERATION ................................................................. 13, 14
(2) Presetting Procedure ............................................................... 23
(1) Before Starting Playback ........................................................... 13
(3) Detailed Description of Preset Functions .............................. 24, 25
(2) Starting Playback ..................................................................... 14
8.
BEFORE SWITCHING OFF THE POWER .......................................... 26
(3) Stopping Playback ................................................................... 14
9.
COMPACT DISCS ......................................................................... 26
(4) PLAY/PAUSE and STANDBY/CUE Operations ............................... 14
10.
TROUBLESHOOTING ..................................................................... 27
HANDY OPERATIONS ............................................................... 15-18
11.
SPECIFICATIONS .......................................................................... 27
(1) Starting Playback from the Middle of a Track
(Manual Search) ....................................................................... 15
(2) Playing at a. Different Speed (Pitch) .......................................... 15
(3) Playing a Specific Section of the Disc (A-B Play) .......................... 16
(4) Playing Repeatedly (Repeat) ..................................................... 17
(5) Inserting Blank Spaces Between Tracks (Auto Space) .................. 18
(6) Dividing the Playing Time in Two (Auto Edit) .............................. 18
Checking the Contents
Check that the carton contains the following items:
3P power supply cord
1 PC.
Operating instructions (this booklet)
1 PC.
Installing the Units
Mount the units onto your console or rack with 19" EIA rack rails.
CAUTION:
•
The DN-C680 will work normally when the player unit is mounted with the front panel within 15 degrees of the vertical plane. If the unit is tilted
excessively, discs may not load or unload properly.
Max. 15°
DN-C580
• DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with
the following standards: EN60065, EN55013, EN55020, EN60555-2 and EN60555-3. Following the provisions of
73/23/EEC, 89/336/EEC and 93/68/EEC Directive.
8
PART NAMES AND FUNCTIONS
(1) Front Panel
POWER button
•
This turns the set on and off.
Select knob
• Turn this' knob to select the next track (or index number) to be
Disc holder
•
Place discs in this holder.
•
Press the OPEN/CLOSE button to open and close the disc holder.
Load discs firmly inside the slot.
•
•
OPEN/ CLOSE button
•
Press this button to open and close the disc holder. The
disc holder will not open during playback.
LEVEL control
Use this to adjust the volume of the headphones.
•
PHONES jack
•
Connect headphones with an impedance of 30 to 40 62/ohms.
STOP button
Press this button to turn all the servo functions off and stop. Press
•
this button during playback to set the stop mode.
STANBDY / CUE button
• When this button is pressed during the play or pause mode, the
•
•
•
pickup returns to the position at which playback started and the
standby mode is set. (Back Cue)
When pressed during playback when the next track has been
programmed, the programmed track is searched for and the
standby mode is set.
The button lights when the standby mode is set.
When the button is pressed while pressing the PLAY MODE button,
the preset mode is set.
PLAY / PAUSE button
• Press this button in the standby, pause or manual search mode to
•
•
•
begin playback.
Press the button in the stop mode to search for the first track and
begin playback.
The button lights during the play mode.
When the button is pressed during playback, the pause mode is set.
The button flashes while the pause mode is set.
PROG. PLAY ON/ OFF button
• When this button is pressed while the PROGRAM IN button is lit,
•
•
•
the program play mode is set.
The button will not function during the A-B play mode.
The button lights during the program play standby and play modes.
When the button is pressed during the program play standby or
play mode, the program play mode is cleared.
•
•
PLAY MODE button
• Press this button to switch the play mode.
PITCH button
• Press this button to switch to the play speed set with the + and
•
•
+
•
•
•
-buttons.
The button lights when the pitch play mode is set.
Press the button again to cancel the pitch play mode and return to
the normal speed.
button
Press this button once to increase the pitch by 0.1 %.
Hold the button in to increase the pitch continuously.
Press the button in the program editing mode to set the program
insert mode.
- button
• Press this button once to decrease the pitch by 0.1%.
• Hold the button in to decrease the pitch continuously.
• Press the button in the program editing mode to clear the program.
END MON button
• Press this button in the standby mode to monitor the end of the
•
track. (End Monitor)
The button lights when the end monitor mode is set.
REPEAT button
• Press this button to set the repeat mode.
• The button lights when the repeat mode is set.
• Press the button again to cancel the repeat mode.
A button
• Press this button when no A point is set to set the A point.
• The button lights when the A point is set.
• When pressed while the A point is set, the A point is searched for
•
PROGRAM IN button
• Press this button to set the program input mode.
• The button will not function during the play mode.
• The button flashes when in the program input mode.
• The button lights when a program is set.
played.
Use the INDEX button to choose whether to select tracks or index
numbers.
Turn the knob clockwise by one click to move one track (or one
index number) forward, counterclockwise by one click to move one
track (or one index number) backward.
When the knob turned while pressing it in, one click corresponds to
10 tracks (or 10 index numbers).
In the preset mode, use this knob to set and enter preset settings.
When setting programs, use this knob to select, enter and check
the program.
and the standby mode is set.
When the button is pressed during manual search while the A point
is set, the A point changes.
B button
• Press this button when no B point is set to set the B point.
• The button lights when the B point is set.
• When pressed while the B point is set, the B point is searched for
•
and the standby mode is set.
When the button is pressed during manual search while the B point
is set, the B point changes.
9
AUTO CUE button
• Press this button to find the beginning of the playback signals on a
track and automatically set the standby mode at that point. (Auto
Cue)
• The button lights when the auto cue mode is set.
• Press the button again to cancel the auto cue mode.
AUTO SPACE button
• Press this button to automatically insert blank spaces of 4 seconds
between tracks during continuous playback. (Auto Space)
• The button lights when the auto space mode is set.
• Press the button again to cancel the auto cue mode.
AUTO EDIT button
• Press this button to divide the tracks on the disc into a first half
(side A) and second half (side B) at the point nearest to half of the
disc's total playing time. (Auto Edit)
• When the A button is pressed while the auto edit mode is on, the A
button lights and the number of the first track and total playing
time of the first half (side A) are displayed on the character display.
• When the B button is pressed while the auto edit mode is on, the B
button lights and the number of the first track and total playing
time of the second half (side B) are displayed on the character
display.
• Press the button again to cancel the auto edit mode.
TIME button
• Press this button to switch the time display between the remaining
time (REMAIN) and the elapsed time (ELAPSED).
INDEX button
• Press this button to set the index select mode, then use the select
knob to select the index number.
• The button lights when the index select mode is set.
• Press the button again to return to the track select mode.
FADER button
• Press this button to enable input of the fader input signals
connected to the "PARALLEL REMOTE" connector.
• The button lights when fader input signal input is enabled.
• Press the button again to cancel the mode.
FINISH MODE button
One of the following three finish modes can be selected:
• Press the STOP button to light the button and set the finish mode to
the stop mode.
• Press the NEXT button to light the button and set the finish mode to
the next mode.
• Press the RECUE button to light the button and set the finish mode
to the recue mode.
SEARCH dial (inner side)
• Turn this dial to set the manual search mode.
• Turn the dial clockwise to move the playback position forward,
counterclockwise to move the playback position backward.
• One click corresponds to one frame of movement. The playback
position can be moved anywhere between the beginning of the first
track and the end of the last track.
10
SCAN dial (outer side)
• Turn this dial to set the manual search (fast forward or fast reverse)
mode.
• Turn the dial clockwise to move the playback position forward,
counterclockwise to move the playback position backward.
• The speed changes according to the angle at which the dial is turned.
Rear Panel
DIGITAL OUT (BALANCED) connector
• This is an active balanced output using an XLR type connector.
• Connect this connector to the balanced digital input connector on an
amplifier or console.
• Signal format: Selectable (See Page 24, 8) 9))
• Pin layout:
1. Common
2. Cold
3. Hot
• Applicable connector: Cannon XLR-3-31 or equivalent
DIGITAL OUT (UNBALANCED) jack
• This is an unbalanced output using an RCA type jack.
• Connect this jack to the unbalanced digital input jack on an
amplifier or console.
• Signal format: Selectable (See Page 24, 8) 9))
ANALOG OUT (BALANCE) connectors
• These are active balanced outputs using XLR type connectors.
• Connect these connectors to the balanced analog input connectors
on an amplifier or console.
• Pin layout:
Pin No.
1
2
3
U.S.A. & Canada
Common
Cold
Hot
Europe & Asia & Others
Common
Hot
Cold
• Applicable connector: Cannon XLR-3-31 or equivalent
NOTE: Do not short-circuit the hot or cold pin with the common pin.
LEVEL L/R controls
• Use these controls to adjust the level of the audio-signals from the
ANALOG OUT (BALANCED) connectors.
ANALOG OUT (UNBALANCED) jacks
• These are unbalanced outputs using RCA type jacks.
• Connect these jacks to the unbalanced analog input jacks on an
amplifier or console.
(3) Display
RS232C/RS422A connector
• This is a serial remote connector. A personal computer or other
•
•
•
TRACK No. display
• This indicates the track number at the current position. The track
external controller can be connected to control the DN-C680
externally.
Applicable connector: 9-pin D-sub (female)
Baud rate: 9600 bps or 19200 bps
Pin layout:
RS232C
Pin no.
1
6
2
7
3
8
4
9
5
Signal name
NC
NC
TxD
NC
RxD
NC
NC
NC
S.GROUND
number flashes during the track search operation and when
switching to the standby mode.
RS422A
I/0
0
I
-
Signal name
NC
S.GROUND
TxD (RETURN)
TxD
RxD
R x D (RETURN)
NC
NC
S.GROUND
I/0
0
0
I
I
-
INDEX No. display
• This indicates the index number at the current position. If the next
index is scheduled, that index number flashes on the INDEX No.
display. The index number also flashes during the index search
operation.
PLAY MODE indicators
• "A-B" lights when in the A-B play mode.
• "SINGLE" lights when in the single track play mode.
TIME MODE indicators
• "ELAPSED" lights when the elapsed time is displayed.
• "REMAIN" lights when the remaining time is displayed.
RS232C /RS422A selector switch
Use this to switch the serial remote connector signal between
RS232C and RS422A according to the external controller's signal.
NEXT No. display
• This displays the number of the next track to be played.
REMOTE connector
This is a parallel remote connector. Use it to control the DN-C680
with dry contact circuit connections. Applicable connector: 25-pin
D-sub (male) Connector signal layout:
Playing time display
• This indicates the time of the current position, in minutes (m),
seconds (s) and frames (f).
Character display
Pin no.
1
14
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22
10
23
11
24
12
25
13
Signal name
FG
PLAY tally
PLAY command
PAUSE tally
PAUSE command
STDBY/CUE tally
STDBY/CUE command
INDEX2/INDEX3 tally
TRACK(+) command
Tally common
TRACK(-) command
Reserved
SEARCH(FWD) command
Reserved
SEARCH(REV) command
Reserved
FADER START command
Tally power supply
Command common
Command common
NC
EOM tally
Reserved
Reserved
Reserved
I/O
O
I
O
I
O
I
O
I
I
I
I
I
O
-
This displays operation messages in the preset and program
modes.
TTL(lol=20mA)
HCMOS(li=3mA)
TTL(lol=20mA)
HCMOS(li=3mA)
TTL(lol=20mA)
HCMOS(li=3mA)
TTL(lol=20mA)
HCMOS(li=3mA)
Playing position display
• This indicates the current position within the track's total playing
HCMOS(li=3mA)
EOM indicator
• This lights when the EOM is preset, and starts flashing when the
HCMOS(li=3mA)
HCMOS(li=3mA)
PHOTO COUPLER
+5V, 20mA
(Ii =10mA)
TTL(lol=20mA)
time.
PITCH display
• This indicates the set play speed in %.
EOM set time is reached.
REPEAT indicator
• This lights when the repeat mode is set.
PLAY LOCK indicator
• This lights when the PLAY LOCK is preset.
(See Page 25,17))
PROGRAM indicator
• This lights when the PROG. PLAY ON/OFF mode is set.
NOTE: The tally output pin has open collector IC specifications (Imax. 20
mA, Vmax. 5V), but the maximum supply current is 80 mA, so use
with a total load current of 80 mA or less.
AC inlet
• Connect the included power cord here.
11
REMOTE CONTROL CONNECTIONS
To control the DN-C680 remotely, refer to the example of remote control connections given below.
The rating of REMOTE connector pin 22 (TALLY POWER SUPPLY) is +5 V, 80 mA maximum.
Avoid currents in excess of the rating.
OPENING AND CLOSING THE DISC HOLDER AND LOADING DISCS
(1) Opening and closing the disc holder
•
This operation only works when the power is on.
•
Press the OPEN /CLOSE button to open or close the disc holder.
•
The disc holders cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally.
Stop playback, then press the OPEN/CLOSE button.
(2) Loading discs
Hold the disc by the edges and place it in the disc tray, Do not touch the signal surface (the glossy side).
•
•
When using 12cm discs, place the disc in the outer tray guides, and when using 8cm discs, place them securely in the inner guides.
CAUTION:
•
Do not place any foreign objects in the disc tray, and do not place more than one disc in the disc tray at a time. Doing so may result in malfunction.
•
Do not push the disc tray in manually when the power is off, as this may result in malfunction and damage the player.
12
BASIC OPERATION
13
(4) PLAY /PAUSE and STANDBY/ CUE Operations
•
•
The operation switches between playback and pause each time
the PLAY/PAUSE button is pressed.
When the STANDBY/CUE button is pressed during playback, the
pickup returns to the position at which playback was started.
The diagrams below show playback patterns when the PLAY/PAUSE
and STANDBY/CUE buttons are pressed.
(2) Starting Playback
When the PLAY/PAUSE button is pressed, playback starts and proceeds as
shown by the arrow on the diagram above.
If the PLAY/PAUSE button is pressed again during playback, the pause
mode is set at that point. Press the PLAY/PAUSE button again to resume
playback.
(3) Stopping Playback
When the STANDBY/CUE button is pressed after starting playback by
pressing the PLAY/PAUSE button, the pickup returns to the position at
which playback was started and prepares for the next playback.
Press the PLAY/PAUSE and STANDBY/ CUE buttons alternately to start
playback repeatedly from the same position.
This function is called "Back Cue".
Sleep mode
The sleep mode is set if no operation is performed for 30 minutes in the standby, pause or manual search mode.
When in the sleep mode, press the PLAY/PAUSE button to search
for the position before the sleep mode was set and start
playback. Press the STANDBY/CUE button to search for the
position before the sleep mode was set and standby at that point.
14
If the pause mode is set and playback is then resumed, the position to
which the pickup returns with the Back Cue function changes.
HANDY OPERATIONS
(1) Starting Playback from the Middle of a Track (Manual
Search)
• When a track is selected and the PLAY/PAUSE button is pressed,
playback starts from the beginning of that track. To start from a
different position in the track, use the procedure described below
to find the desired position.
(2) Playing at a Different Speed (Pitch)
• Use this function to play discs at different speeds.
• The speed can be changed within the range of -9.9 to +9.9%.
NOTE:
When the play speed (PITCH) is set, the display shows the set
pitch, but the disc is played at the standard speed until the
PITCH button is pressed (and the button is lit). When the play
speed is changed, the sampling frequency of the digital output
signal also changes, so it may not be possible to receive digital
signals.
15
(3) Playing a Specific Section of the Disc (A-B Play)
•
Use this function to set the play start and end positions and only
play the desired section of the disc.
NOTE: The A-B play mode cannot be set unless the A point, B point
or both the A and B points are set.
NOTE:
The following happens if either the A or B point is not set:
• If only the A point is set, the B point is automatically set at
the end of the track for which the A point is set.
• If only the B point is set, the A point is automatically set at
the beginning of the track for which the B point is set.
If the playing time of the A-B section is shorter than the total
of the set fade in and fade out times, the fade in and fade out
settings are ignored.
When the B point is before the A point, the section from the B
point to the A point is played.
16
(4) Playing Repeatedly (Repeat)
A-B repeat play
17
(5) Inserting Blank Spaces Between Tracks (Auto Space)
•
Use this function to insert blank spaces of 4 seconds between
tracks during continuous playback.
NOTE:
When non-consecutive tracks are played (when the search operation is performed), a blank space of over 4 seconds may be
inserted automatically.
18
(6) Dividing the Playing Time in Two (Auto Edit)
•
Use this function to divide the total playing time of the disc into
side A (first half) and side B (second half).
PROGRAMMED PLAYBACK
• The tracks can be programmed to play in a certain order.
• Up to 25 tracks can be programmed.
• Programmed playback is performed according to the play mode
(2) Changing the Program
(single or continuous) and finish mode (stop, next or recue) settings.
To exit the program editing mode, press the PROGRAM IN button. The set returns to the normal mode.
19
(3) Playing Programs
20
(4) Presetting Programs
•
•
Programs can be stored in the preset memory. When a disc for which a program is preset is loaded, the programmed playback mode is set
automatically.
Programs can be stored for up to three discs.
21
PRESET FUNCTIONS AND OPERATIONS
(1) List of Preset Functions
•
•
•
Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even
when the power is turned off.
The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher quality
playback.
One of the preset functions can be used to display information on this set (microprocessor version).
Preset function type
Preset type
Auto cue
Auto stop
FS converter
Program 1
Program 2
Program 3
Digital output
Digital output
End monitor
E.O.M.
Next track standby
Fade in time
Fade out time
Play speed
Delay start
Play lock
Frame display
CDR disc
CDR disc
Serial remote
Switch protect
Player ID
Parallel remote
Parallel remote
Parallel remote
Parallel remote
Stereo/mono
Pos Code
Preset clear
Set information
Description
Character display
(as set upon shipment from
factory)
Selection of preset type
Preset Type 1
Setting of audio startup level for auto cue function
CueDet.-60db
Setting of whether or not to automatically stop the servo functions
Sleep ON
Setting of whether or not to use the FS converter and sampling frequency FS OFF
setting (when optional FS converter mounted)
Setting of whether or not to play program 1
Program1 OFF
Setting of whether or not to play program 2
Program2 OFF
Setting of whether or not to play program 3
Program3 OFF
Selection of output signal format
D.Out Pro
Selection of whether or not to output subcodes
Subcode OFF
Setting of whether or not to use the end monitor function and monitor
End Mon. 10sec
time setting
Setting of whether or not to display the EOM and display time setting
E.O.M. 10sec
Setting of whether or not to standby at the next track when the
NextStb.OFF
STANDBY/CUE button is pressed during playback
Fade in time setting
Fadeln OFF
Fade out time setting
Fadeout OFF
Standard playing speed setting
Normal Speed
Delay start time setting
Delay OFF
Selection of whether or not to inhibit the panel switches during playback PlayLock OFF
Selection of whether or not to display frames
FR Disp ON
Selection of whether or not to play CDR discs which do not include a TOC CD-R NO TOC
Selection of whether or not to play skip tracks on CDR discs
CD-R Skip OFF
Baud rate setting
9600bps
Selection of whether or not to enable the panel switches
Switch ENA
Selection of whether or not to set player IDs and selection of ID number PlayerlD OFF
Selection of whether or not to accept parallel remote signals
Remote ENA
Selection of whether or not to output standby tally
ST. Tally ON
External control tally output signal setting
Index2 Tally
Fader start mode selection
Fader Pause
Selection of stereo or monaural playback
Stereo
Selection of whether or read Pos codes
Pos OFF
Setting for clearing presets and setting them to the initial values
' Init. Preset
Ver. **** (* = number)
Microprocessor version display
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
When presettings are made, the time display set with the TIME button, the play mode set with the PLAY MODE button and the finish mode set with the
FINISH MODE button at that time are stored in the memory. These modes will be set when the power is next turned on.
NOTE:
For CDR discs without TOCs, there are no pits (signals) at the disc's lead in and lead out sections, so errors may occur, particularly when searching
for tracks. If an error should occur, open the disc holder, then close it and perform the operation again.
22
(2) Presetting Procedure
• Functions can be preset using the buttons on the front panel.
• The presettings can also be set using serial remote signals (RS232C/RS422A1.
• Make the presettings with no disc loaded, in the stop or standby mode.
23
(3) Detailed Description of Preset Functions
(* = initial setting)
1)
"Preset Type (*1" (Three different sets (types) of presettings can be made and used for different purposes.)
* Preset Type1
: Set to preset type 1.
Preset Type2
: Set to preset type 2.
Preset Type3
: Set to preset type 3.
2) "CueDet. (-**) dB"
CueDet. (-**) dB
: Set the audio detection level for cueing. (-72/-66/*-60/-54/-48/-42/-36)
3) "Sleep ON (OFF)"
* Sleep ON
:
Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or manual
search mode.
Sleep OFF
:
Do not automatically turn the servo functions off.
4) "FS OFF (***kHz)" (This setting can only be made when an optional FS converter is mounted.)
* FS OFF
: Do not use the FS converter.
FS (***kHz)
: Select the digital output FS. (32kHz/44.1 kHz/48kHz)
5) "Programl OFF (ON)"
Programl OFF (ON)
: Store the contents of program 1 when on. (Initial setting-OFF)
6) "Progam2 OFF (ON)"
Program2 OFF (ON)
: Store the contents of program 2 when on. (Initial setting - OFF)
7) "Program3 OFF (ON)"
Program3 OFF (ON)
: Store the contents of program 3 when on. (Initial setting - OFF)
8) "D.Out Pro (Cons)"
*D.Out Pro
: Output digital signals in AES/EBU format.
D.Out Cons
: Output digital signals in consumer format.
9) "Subcode ON (OFF)" (When "D.Out Cons" is set above, subcodes can be output with the digital output signals.)
Subcode ON
: Output subcodes with the digital output signals. (consumer SPDIF format)
*Subcode OFF
: Do not output subcodes with the digital output signals. (consumer IEC 958 Type II format)
NOTE: 0 sec. start is not possible when the above is set to "Subcode ON".
10) "End Mon. (**)sec"
End Mon. (**)sec
: Set the end monitor time. (5/*10/15/20/25/30/35)
End Mon. OFF
: Do not use the end monitor function.
11) "E.O.M. (**)sec" (Output EOM tally signal to remote pint (24))
E.O.M. (**)sec
:
Set the EOM time. (0/5/*10/15/20/25/30)
E.O.M. OFF
.
Do not use the EOM function.
*Next Stb.OFF
:
Return to the play start position and standby when the STANDBY/CUE button is pressed during playback.
Next Stb.ON
:
Standby at the beginning of the next track when the STANDBY/CUE button is pressed during playback.
:
Set the fade in time. (*OFF/10m/50m/0.1/0.5/1/2)
:
Set the fade out time. (*OFF/10m/50m/0.1/0.5/1/2)
12) "Next Stb.Off (ON)"
13) "FadeIn OFF ('s)"
Fadeln OFF (***s)
14) "FadeOut OFF (***s)"
FadeOut OFF (***s)
15) "Normal (+/-***%) Speed"
*Normal Speed
:
(+/-***%) Speed
:
24
Play at normal speed.
Play at variable speed. t(0.2/0.4/0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0)
16) "Delay OFF (***ms)"
Delay OFF (***ms)
:
Set the time for delayed start after the play start operation. (*OFF/100m/200m/300m)
PIayLock ON
:
Inhibit all operations other than the PLAY/ PAUSE, TIME and PLAY MODE buttons during playback.
* PIayLock OFF
:
Enable all functions during playback.
* FR Disp ON
:
Display the frames on the time display during playback.
FR Disp OFF
:
17) "PIayLock ON (OFF)"
18) "FR Disp ON (OFF)"
Do not display the frames on the time display during playback.
(The frames are displayed in the manual search, standby, pause and end monitor modes.)
19) "CD-R TOC (NO TOC)"
CD-R TOC .
:
Play normal CDR discs containing TOCs.
* CD-R NO TOC .
:
Play CDR discs not containing TOCs.
:
Play skip tracks on CDR discs.
:
Do not play skip tracks on CDR discs.
20) "CD-R SkipON (OFF)"
CD-R SkipON .
* CD-R SkipOFF .
21) "9600 (19200) bps"
* 9600 bps
19200 bps
22) "Switch ENA (INH)"
* Switch ENA
Switch INH
: Set the baud rate to 9600 bps.
: Set the baud rate to 19200 bps.
: Enable operation of all the switches on the front panel.
: Inhibit operation of all panel switches other than those used for presetting operations.
23) "Player ID (**1"
Player ID (**)
: Set the player ID.
(The ID can be set to OFF or to 0 to 15. The initial setting is "OFF".)
24) "Remote EMA (INHI"
*
Remote ENA
: Enable input of control signals to the parallel remote connector.
Remote INH
: Inhibit input of control signals to the parallel remote connector.
25) "St. Tally ON (OFF)"
*
St. Tally ON
: Output standby tally from parallel remote connector.
St. Tally OFF
: Do not output standby tally from parallel remote connector.
26) "(******) Tally"
* INDEX2 Tally
INDEX3 Tally
: Output index 2 tally signal to remote pin (17).
: Output index 3 tally signal to remote pin (17).
27) "Fader Pause (Play)"
* Fader Pause
Fader Play
: Start playback when remote fader pins (9-10) are short-circuited and pause when pins are open.
: Start playback when remote fader pins (9-10) are short-circuited and continue playback when pins are open.
28) "Stereo (Mono)"
* Stereo
Mono
: Output L and R stereo signals from the output connector.
: Output mixed L and R signals from the output connector.
29) "Pos ON (OFF)"
Pos ON
* Pos OFF
: Read Pos codes on CD and CDR discs.
: Do not read Pos codes on CD and CDR discs.
30) "Preset Clr? (Init. Preset)"
Preset Clr?
* Init. Preset
: Clear the presettings (set to the initial factory values).
: Do not clear the presettings.
31) "Ver. xxxx"
: Display the microprocessor version. ("xxxx" is a number.)
25
BEFORE SWITCHING OFF THE POWER
When you have finished using the CD player, before switching off the power be sure that the disc holder has been closed with the OPEN/CLOSE button.
CAUTION:
Do not forcibly close the disc holder when the power is off. It
may damage the unit when it is transported.
Do not switch off the power when the disc
holder is open.
POWER OFF
Switch off the power after the disc holder has
been closed with the OPEN/CLOSE button.
POWER OFF
COMPACT DISCS
(1) Precautions on handling compact discs
•
•
•
•
•
•
•
•
Do not allow fingerprints, oil or dust to get on the surface of the disc.
If the disc is dirty, wipe it off with a soft dry cloth.
Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths to clean discs.
Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its case or returning it.
Do not bend the disc.
Do not apply heat.
Do not enlarge the hole in the center of the disc.
Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.
Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in winter. Do not attempt to dry the disc with a
hair dryer, etc.
(2) Precaution on storage
• After playing a disc, always unload it from the player.
• Always store the disc in the jewel case to protect from dirt or damage.
• Do not place discs in the following areas:
1) Areas exposed to direct sunlight for a considerable time.
2) Areas subject to accumulation of dust or high humidity.
3) Areas affected by heat from indoor heaters, etc.
26
TROUBLESHOOTING
When you think the player might be broken, please check the following items.
The disc holder does not open or close.
•
Is the power switch set to ON?
•
Is the player in the process of playing a disc? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See page 12
The display still indicates “—“ when a disc is loaded.
•
Is the disc loaded properly?
•
Is the disc dirty or scratched?
There is no sound or the sound is distorted.
•
Are the output cables connected to the amplifier correctly?
•
Is the adjustment of the amplifier's controls and switching correct?
The specified portion of the disc cannot be played back correctly.
•
Is the disc dirty or scratched?
There is a button that doesn't function.
•
Has a preset such as PLAY-LOCK been set? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . See Page 25
SPECIFICATIONS
GENERAL
Type:
Disc type:
AUDIO SECTION
Channels:
Sampling Frequency:
Digital Filter:
Frequency Response:
Total Harmonic Distortion:
Signal to Noise Ratio:
Channel Separation:
Analog Output:
CD Player
Standard Compact Discs (12 cm, 8 cm/5", 3")
2 channels (Stereo), 1 channel (Mono)
44.1 kHz (32/48 kHz available using optional ACD-25FSC)
18 bit 8-times oversampling Digital filter
5 to 20,000 Hz (t 1.0 dB)
0.003% (1 kHz, 0 dB playback, A filter)
105 dB (1 kHz, 0 dB playback, A filter)
100 dB (1 kHz, 0 dB playback, A filter)
1 kHz, 0 dB playback
Pin No.
Transfer and Connector:
Output Level:
Output Level Adjust Range:
Headphone Output:
Digital Output
Transfer and Connector:
Signal Format:
Output Level:
Variable Pitch Control:
Audio Start-up rime:
Frame Search Accuracy:
DIMENSIONS:
WEIGHT:
POWER CONSUMPTION:
POWER SUPPLY:
Balanced active, XLR connector
Unbalanced, RCA jack
Balanced: + 18 dBs, 600 62/ohms
Unbalanced: 2 Vrms, 10 kg/kohms
+22 dBs to -20 dBs (Balanced)
20 mW (30 to 40 52/ohms)
1
2
3
U.S.A. & Canada
Common
Cold
Hot
Europe & Asia & Others
Common
Hot
Cold
Balanced active, XLR connector (1. Common 2. Cold 3. Hot)
Unbalanced, RCA jack
AES/EBU or IEC 958 Type II or SPDIF
Balanced: 3 Vp-p, 110 ohms
Unbalanced: 0.5 Vp-p, 75 ohms
f 9.9% max.
0.01 second less
1 frame (1 /75 second)
4820) x 132(H) x 297(D)mm
(19.0" x 5-13/64" x 11-11 / 16")
6.8 kg, 15 Ibs
19 W
AC 120 V 10%, 60 Hz (U.S.A. and Canada)
AC 230 V 10%, 50 Hz (Europe, Asia, Others)
ENVIRONMENTAL CONDITIONS
Operating Temperature:
+5°C to 35°C
Humidity:
25% to 85%, non condensing
Storage Temperature:
-20°C to 60°C
REMOTE
Serial Remote:
RS232C/RS422A (switchable), D-sub 9-pin
Parallel Remote:
D-sub 25-pin
" Specifications and design are subject to change without notice for purpose of improvement.
27