Denon DVD-1930 CD Player User Manual

DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
DVD-1930
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
PRECAUTIONS
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
BEAM.
LOCATION:
PRINTED ON THE BACK
Nonuse periods - Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is
not to be used for a long time. Unplug the unit during lightning storms.
Please read this operating instructions carefully before using your DVD video player,
and keep this for future reference.
Declaration of Conformity
We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following
standards:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 73/23/EEC, 89/336/EEC and
93/68/EEC Directive.
Important
Use only discs marked with logos listed on page 6.
Power Supply
The main power supply is engaged when the main plug is plugged in a 200V-240V, 50Hz AC outlet. To operate the unit, press
the ON/STANDBY button and turn on the unit.
–2–
EN
Warning
Caution
1) Do not attempt to open the cabinet. There are no parts
you can service inside. Refer all servicing to qualified
service personnel.
WARNING:
2) Slot and openings in the cabinet and at the side or botLIVE PARTS INSIDE.
tom are provided for ventilation. To ensure reliable operaDO NOT REMOVE ANY SCREWS.
tion and to protect the unit from overheating these opening must not be blocked or covered. Avoid enclosed
spaces such as book cases unless proper ventilation is
Installation Location
provided.
For safety and optimum performance of this unit:
3) Keep the unit away from the radiator heat sources.
• Do not stand up the unit vertically. Install the unit in a horizon4) Avoid using near strong magnetic fields.
tal and stable position. Do not place anything directly on top
5) Do not push objects of any kind into this through the
of the unit. Do not place the unit directly on top of the TV.
cabinet slot as they could touch current carrying parts or
short circuit parts resulting in a fire or electric shock.
• Shield it from direct sunlight and keep it away from sources of
6) Never spill liquid of any kind on this unit.
intense heat. Avoid dusty or humid places. Avoid places with
If liquid is spilled into the unit, consult qualified service
insufficient ventilation for proper heat dissipation. Do not block
engineer.
the ventilation holes on the sides of the unit. Avoid locations
7) Use this unit in a horizontal (flat) position only.
subject to strong vibration or strong magnetic fields.
8) This equipment is in Stand-by mode when it is turned off
• Be sure to remove a disc and unplug the AC power
whilst the power cord is connected.
cord from the outlet before carrying the unit.
9) Keep the set free from moisture, water and dust.
10) Sufficiently ventilate the place of installation.
Cautions on Installation
If the unit is left in a room full of the smoke from cigaNoise or disturbance of the picture may be generated
rettes, etc., for long periods of time, the surface of the
if this unit or any other electronic equipment using
optical pickup could get dirty, in which case it will not be
able to read the signals properly.
microprocessors is used near a tuner or TV.
11) Store the operating instructions in a safe place.
If this happens, take the following steps:
After reading the operating instructions, store them in a
• Install this unit as far as possible from the tuner or TV.
safe place as they could come in handy in the future.
• Set the antenna wires from the tuner or TV away from this
12) Handle the power cord carefully. Hold the plug when
unit’s power cord and input/output connection cords.
unplugging the code.
• Noise or disturbance tends to occur particularly when using
13) All the safety cautions and operating instructions should
indoor antennas or 300Ω/ohms feeder wires. We recommend
be read before the DVD player is operated.
using outdoor antennas and 75Ω/ohms coaxial cables.
14) Use caution not to pinch your finger in the disc slot.
NOTE:
15) Do not put heavy objects on the AC power cord.
• For heat dispersal, do not install this equipment in a
16) Keep the AC power cord away from heat appliances.
confined space such as a book case or similar unit.
17) Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the DVD player.
18) Do not put any pressure to the DVD player when carrying.
19) Do not use the DVD player outdoors.
10 cm or more
20) Do not place any combustible objects on the device (candles, etc.).
21) Disconnect the mains plug to shut off when find troubles
or not in use.
22) The mains plug shall remain readily operable.
23) Read both manual instructions to ensure correct and
safe installation and interconnection of the unit in multimedia systems.
Wall 24) Keep the distances 20cm around apparatus of ventilation
openings.
25) To completely disconnect this product from the mains,
disconnect the plug from the wall socket outlet. The
mains plug is used to completely interrupt the power
Dew Warning
supply to the unit and must be within easy access by the
user.
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a
cold room or under conditions of high humidity. Do not use the
DVD Player at least for 2 hours until its inside is dry.
To avoid fire or electric shock, do not expose this unit to rain or moisture.
ON / STANDBY
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorised Service Centre for servicing.
–3–
EN
English
PRECAUTIONS
TABLE OF CONTENTS
■ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . 2
Important. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cautions on Installation . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dew Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Avoid the Hazards of Electrical Shock and Fire . . . . . . . 3
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
■ INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for the Progressive Scan Outputs . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Displays during Operation . . . . . . . . . . . . . . . . . . . . . . 11
■ CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Description - Rear Panel . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to an Audio System . . . . . . . . . . . . . . . . . . 13
Connection to 5.1-channel Surround Sound System. . . 14
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 15
Connection to a TV with an HDMI Compatible Port . . . 16
■ DISC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CANCELLING AND CALLING BACK
PBC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
HDMI Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Pure Direct Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Brightness of the Front Panel Display. . . . . . . . . . . . . . 17
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CALLING UP A MENU SCREEN DURING
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DVD Audio Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLAYBACK OF ALL GROUPS . . . . . . . . . . . . . . . . . 18
PLAYBACK FROM A DESIRED GROUP . . . . . . . . . 18
PAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLAYBACK OF THE BONUS GROUP . . . . . . . . . . . 18
Still / Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
■
■
■
■
■
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . .
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . .
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . .
Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dialog Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . .
By using the SEARCH MODE button . . . . . . . . . . . .
By using the SKIP buttons H G . . . . . . . . . . . . .
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
By using the SEARCH MODE button . . . . . . . . . . . .
By using the SKIP buttons H G . . . . . . . . . . . . .
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . .
REPEAT TRACK / GROUP / ALL . . . . . . . . . . . . . . .
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Programme Playback. . . . . . . . . . . . . . . . . . . . . . . . . .
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . .
DivX® Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DivX® Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the On-Screen Display . . . . . . . . . . . . . . . . .
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker Setting for ANALOG AUDIO . . . . . . . . . . . . . .
Speaker Setting for HDMI AUDIO . . . . . . . . . . . . . . . .
Ratings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RATING LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . .
CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . .
Others Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset to the Default Settings
(except for RATINGS and VIDEO OUT) . . . . . . . . . . . .
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PIN CONNECTION (AV1) . . . . . . . . . . . . . . . . . . . . . .
19
19
19
19
19
20
20
20
20
20
20
21
21
21
21
21
21
21
22
22
22
23
23
25
26
26
27
27
28
28
28
28
29
29
29
30
31
32
32
32
33
33
33
34
34
34
35
37
37
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials
in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning chemical waste.
This product and the accessories packed together constitute the applicable product according to the
WEEE directive except batteries.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
–4–
EN
The serial number of this product may be found on the back of the DVD player. No others have the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorised by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineering
or disassembly is prohibited.
U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.
Notice for the Progressive Scan Outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 480(525) or 576(625) progressive
scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there
are questions regarding your TV set compatibility with this 480p(525p) or 576p(625p) DVD player, please contact our customer service centre.
Supplied Accessories
Please check to make sure the following items are included with the main unit in the carton.
Remote control “R6P” (AA)
Audio cable
• • • • • • • • • • • • • • • 1 batteries • • • • • • 2
•••••••••••••••1
Video cable
•••••••••••••••
1
Operating
Service Station
Instructions • • • 1 List • • • • • • • • • • • 1
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual, with the following meanings.
DVD-V :
Description refers to playback of DVD-Video discs (including DVD-R/RW discs).
DVD-A :
Description refers to playback of DVD-Audio discs.
VCD
:
Description refers to playback of Video CDs.
Super
Audio CD
:
Description refers to playback of Super Audio CDs.
CD
:
Description refers to playback of Audio CDs.
MP3
:
Description refers to playback of discs formatted with MP3.
JPEG
:
Description refers to viewing of JPEG discs.
WMA
:
Description refers to playback of discs formatted with WMA.
DivX®
:
Description refers to playback of discs formatted with DivX®.
–5–
EN
English
INTRODUCTION
ABOUT THE DISCS
Playable Discs
Playable
discs
Mark (logo)
Region code
Recorded
signals
Disc size
-
Digital audio
12 cm
or
8 cm
DVD-Audio
* 2, 3, 5
Disc types
Example
Track 1
DVD-Video
Example
* 1, 2, 3, 5
Group 1
Track 2
Track 3
Group 2
Track 4
Title 1
Track 1
Track 2
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
2
or
DVD-R
DVD-RW
Digital video
(MPEG2)
DivX®
12 cm
or
8 cm
DivX®
Example
Track 1
* 1, 3, 4, 5,
6, 7, 8
Group 1
Track 2
Track 3
Group 2
Track 4
Track 5
Track 6
(DVD-R/RW only)
Video CD
* 1, 3, 5, 9
Super
Audio CD
DIGITAL VIDEO
-
Digital video
with
audio
Video CD,
Super
Audio CD,
Audio CD
Digital audio
* 3, 5
Audio CD
*3
-
Digital audio
-
Digital audio
MP3
WMA*10
Digital picture
(JPEG)
DivX®
CD-R
CD-RW
* 3, 4, 5, 7,
8, 10
Picture CD
* 3, 4, 5,
7, 8
-
JPEG
Example
Track 1
12 cm
or
8 cm
MP3,
JPEG,
WMA,
DivX®
Track 2
Example
Track 1
Track 3
Track 4
Track 5
Track 4
Track 5
Group 1
Track 2
Track 3
Track 6
Group 2
Track 6
12 cm
is a trademark of DVD Format/Logo Licensing Corporation.
Windows Media and the Windows logo are trademarks
or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
is trademark of Eastman Kodak Company.
DivX, DivX Certified, and associated logos are trademarks of
DivX, Inc. and are used under
license.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This player conforms to the PAL colour system. Also you can play back discs recorded with the NTSC system via a PAL system TV set.
*2: Certain DVD discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardised discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
*6: Only the discs recorded in the video format and finalised can be played back.
Unfinalised discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back
at all or normally (the picture or sound may be distorted, etc.).
*7: If there is too much recordable space left on a disc (the used portion is less than 55mm across), it may not be played back properly.
*8: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*9: This unit conforms to ver.1.1 and ver.2.0 of Video CD standard, with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD.
Ver.2.0 (with PBC function): While using a Video CD with PBC function, “Pbc” appears on the screen and the display.
NOTE: When playing back Video CDs with PBC function, some operations (e.g., track search and repeat tracks) cannot be
performed. Cancel PBC function temporarily to perform those operations (refer to page 17).
*10: This player cannot play back the disc contents protected by Windows Media Digital Rights Management (DRM).
What is PBC? “PBC” stands for Playback Control.
You can play back interactive software using menu screens. Refer to instructions in the Video CD.
¡ NEVER play back the following discs. Otherwise,
malfunction may result!
DVD-RAM / CD-i / Photo CD / DVD with region codes
other than 2 or ALL / DVD-ROM for personal computers /
CD-ROM for personal computers
• Any other discs without compatibility indications
–
CAUTION:
• Use caution not to pinch your finger in the disc slot.
• Be sure to remove a disc and unplug the AC power
cord from the outlet before carrying the DVD player.
6–
EN
¡Progressive Scan system
The progressive scan system provides less flickering and
images in higher resolution than that of traditional 480i
(525i), 576i(625i) or multi television signals through the
interlace scan system.
¡Analogue 5.1-channel Dolby and DTS surround output
This player is equipped with analogue Multi-channel Dolby
and DTS surround audio out jacks for playback.
¡HDMI (High-Definition Multimedia Interface)
You can enjoy clearer video output when connecting this
player to a display equipment with an HDMI-compatible port.
¡Dialog Speed
Playback in slightly faster or slower speed while keeping
the sound quality as in the normal playback.
Dialog speed is available only on discs recorded in the
Dolby Digital format.
¡Still/Fast/Slow/Step playback
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
¡Still Mode
The resolution of pictures while in the still (pause) mode is
adjusted.
¡Random Playback for Super Audio CD, Audio
CD, MP3, JPEG, DVD-Audio and WMA
This player can shuffle the playback order of tracks in random sequence.
¡Programme Playback for Super Audio CD, Audio
CD, MP3, JPEG, DVD-Audio and WMA
You can programme the playback order of tracks in a
desired sequence.
¡DVD menus in a desired language
You can display DVD menus in a desired language if the
language is available on the DVD.
¡Auto Power Off
The power turns off automatically if there is no activity at
the player or its remote control for more than 30 minutes
(refer to page 33).
¡Subtitles in a desired language
You can select a language for subtitles if the language is
available on the DVD and DivX®.
¡Selecting a camera angle
You can select a desired camera angle if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select a desired audio language and sound mode
if different languages and modes are available on the disc.
¡Ratings Control (Parental lock)
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Super Audio CD multi-channel playback compatibility
In addition to playing DVD-Video and DVD-Audio discs,
this player can play multi-channel Super Audio CDs with a
playback frequency range covering 100kHz and a dynamic
range of 120dB or greater within the audible frequency
range, and a maximum of 5.1 channels can be output.
¡Screen Saver
The screen saver programme starts if there is no activity
at the player or its remote control for more than 5 minutes.
The brightness of the display is darken by 75%. The programme is inactivated when there is any activity.
¡Picture Control
Picture Control adjusts brightness, contrast, colour,
gamma correction and sharpness of the specific display.
¡Search
Chapter search: Search for a desired chapter.
Title search:
Search for a desired title.
Group search: Search for a desired group.
Page search:
Search for a desired page.
Track search:
Search for a desired track.
Time search:
Search for a desired time point of a title
or track.
¡Repeat
Chapter: Repeated playback of a chapter of the disc.
Title:
Repeated playback of a title of the disc.
Track:
Repeated playback of a track of the disc.
All:
Repeated playback of the entire disc.
(exclude DVD-Video)
A-B:
Repeated playback of a part between two points.
Group: Repeated playback of a folder of the DVD-Audio/
MP3/JPEG/WMA/DivX® disc.
¡Zoom
2-time or 4-time magnified image can be displayed.
¡Marker
Electronic reference point designated by user can be
called back.
¡Resume Playback
You can resume playback from the point at which the playback has been stopped.
¡Component Video Out Jacks
Jacks located on the back of the DVD Player which are
used to send high-quality video to a TV via Component
Video In Jacks.
¡Bit rate indication
¡DRC (Dynamic Range Control)
You can control the range of sound volume.
¡MPEG sound
This player can handle a disc that supports MPEG audio
when it is connected to an MPEG decoder.
¡Displaying a JPEG picture
Kodak Picture CDs can be played back. Still images stored
in JPEG format on CD-R/RW can also be played back.
¡Reproducing WMA data
You can enjoy WMA files which are recorded on CD-R/RW.
¡Reproducing DivX® data
You can enjoy DivX® files which are recorded on DVDR/RW or CD-R/RW.
• Official DivX® Certified product
• Plays all versions of DivX® video (including DivX® 6)
with standard playback of DivX® media files.
¡Pure Direct
¡Automatic detection of discs
This player automatically detects if a loaded disc is DVDVideo, DVD-Audio, Video CD, Super Audio CD, Audio CD,
MP3, JPEG, WMA or DivX®.
¡Playing back an MP3 disc
You can enjoy MP3 files which are recorded on CD-R/RW.
¡Direct Search
You can search a desired title, chapter, and track with
numeric button during playback or in stop mode.
¡On-screen display
Information about the current operation can be displayed
on the TV screen, allowing you to confirm the currently
active functions (such as programme playback), using the
remote control.
¡Dimmer
The brightness of the display can be adjusted.
–7–
The sound quality of analogue audio output is improved by
turning off HDMI output, video signal output, and the front
panel display.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
“WMA” (Windows Media Audio) is an audio
codec developed by Microsoft® in the United
States of America.
EN
English
English
FEATURES
FUNCTIONAL OVERVIEW
FRONT PANEL
1
2
3
6/25
4 5
7/29
ON / STANDBY
13
12
11
10
9
8
1.
2.
3.
4.
5.
6.
7.
8.
9.
REMOTE CONTROL
10.
36
1
3
11.
12.
13.
14
15
16
17
35
34
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
18
19
20
21
33
32
31
22
23
30
6
24
5
7
4
25
29
11
26
26.
27.
28.
29.
28
27
The buttons with circled numbers can only be operated with
the remote control.
30.
31.
32.
33.
34.
35.
36.
ON/STANDBY (POWER ON/OFF) Buttons [page 17]
Disc loading tray
OPEN/CLOSE Button [page 17]
PLAY Button [page 17]
STOP Button [page 17]
H (SKIP DOWN) Button [page 20]
G (SKIP UP) Button [page 20]
DIMMER Button [page 17]
PURE DIRECT Button [page 17]
Press to activate Pure Direct function to reduce noise
level.
HDMI Button [page 17]
Press to set the HDMI connector’s video signal output
mode.
STILL/PAUSE Button [page 18]
Display, Remote Sensor Window
HDMI indicator [page 17]
Lights up when there is video signal output from the
HDMI OUT jack.
A-B REPEAT Button [page 22]
REPEAT Button [page 21]
RANDOM Button [page 23]
ZOOM Button [page 20]
CLEAR Button [page 21]
ANGLE Button [page 28]
MENU Button [page 18]
ENTER Button [page 18]
Cursor Buttons [page 18]
RETURN Button [page 18]
SEARCH MODE Button [page 20]
h (Fast Reverse SEARCH) Button [page 19]
Press more than 2 seconds when you use the front
panel button for this function.
GROUP Button [page 18]
SUPER AUDIO CD SET UP Button [page 28]
PAGE Buttons [page 18]
g (Fast Forward SEARCH) Button [page 19]
Press more than 2 seconds when you use the front
panel button for this function.
SETUP Button [page 29]
SUBTITLE Button [page 27]
TOP MENU Button [page 18]
DISPLAY Button [page 26]
AUDIO Button [page 27]
Numeric Buttons [page 17]
MODE Button [page 18]
Loading the Batteries
1. Open the battery compartment cover.
2. Insert two “R6P” (AA) batteries, with
each one oriented correctly.
3. Close the cover.
Cautions On Batteries
• Use “R6P” (AA) batteries in this remote control unit.
• Replace the batteries with new ones approximately once a year, though
this depends on the frequency with which the remote control unit is used.
• If the remote control unit does not function within a close proximity of the main
unit, replace the batteries with new ones, even if less than a year has passed.
• The included batteries are only for verification purpose. Replace them
with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the proper direction, following the
and
marks in the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not mix a new battery with an old one.
• Do not mix two different types of batteries such as alkaline and manganese.
• Do not short-circuit, disassemble, heat or dispose of batteries in flames.
• Remove the batteries when not planning to use the remote control
unit for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from the inside
of the battery compartment, then insert new batteries.
–8–
EN
FUNCTIONAL OVERVIEW
English
Tour of the Remote Control
Buttons on remote control work in different ways for DVD-Video, DVD-Audio, Video CD, Super Audio CD, Audio CD, MP3,
JPEG, WMA and DivX®.
Refer to the following table for correct use.
POWER ON/OFF Buttons
DVD-Video, DVD-Audio
VCD
Super Audio CD, CD,
MP3, JPEG, WMA
DivX®
· To turn on or standby
· To turn on or standby
· To turn on or standby
· To turn on or standby
the unit.
A-B REPEAT Button
· To mark a segment
between A and B for
repeated playback.
the unit.
· To mark a segment
between A and B for
repeated playback.
the unit.
· To mark a segment
between A and B for
repeated playback.
(Super Audio CD, CD)
the unit.
· To mark a segment
between A and B for
repeated playback.
· To repeat playback of
REPEAT Button
· To repeat playback of
a title, chapter, group
or track.
RANDOM Button
· To repeat playback of
a track or disc.
· To shuffle the playing
· To play back tracks in
order of groups and
tracks. (DVD-Audio)
· To set Picture Control.
· To activate the 3D
MODE Button
ZOOM Button
sound (Virtual
surround system).
· To set Dialog Speed.
· To programme a
specific playback
order. (DVD-Audio)
· To play all groups.
(DVD-Audio)
· To magnify part of the
picture (x2/x4).
(DVD-Video)
ANGLE Button
random order.
· To programme a
specific playback
order.
· To activate the 3D
sound (Virtual
sound (Virtual
surround system).
surround system).
· To set Picture Control.
(CD, MP3, WMA)
· To activate the Slide
Show mode. (JPEG)
· To activate the 3D
picture (x2).
· To access various
picture (x2). (JPEG)
(JPEG)
· To select a subtitle
· To access various
audio functions on the
disc.
DISPLAY Button
· To select a subtitle
language on the disc.
· To select STEREO,
L-ch or R-ch.
· To select STEREO,
L-ch or R-ch. (CD)
· To access various
audio functions on the
disc.
· To display the current
· To display the current
· To display the current
· To display the current
disc or HDMI mode.
disc or HDMI mode.
disc or HDMI mode.
disc or HDMI mode.
SEARCH MODE Button · To search for a
title, chapter, track,
time or marker.
OPEN/CLOSE Button
picture (x2).
· To rotate a picture.
language on the disc.
AUDIO Button
· To set Picture Control.
· To magnify part of the · To magnify part of the · To magnify part of the
camera angles on
the disc.
SUBTITLE Button
a track or disc.
(Super Audio CD, CD) · To repeat playback of
· To repeat playback of
a track, group or disc.
a track, group, or disc.
(MP3, JPEG, WMA)
· To open or close
the disc tray.
· To search for a track,
· To search for a track.
· To search for time or a · To search for a track
· To open or close
· To open or close
time or marker.
the disc tray.
marker.
(Super Audio CD, CD)
the disc tray.
or time.
· To open or close
the disc tray.
Numeric Buttons
· To select a title,
chapter, group or
track directly.
· To select a track
directly.
–9–
· To select a track
directly.
· To select a track
directly.
EN
FUNCTIONAL OVERVIEW
Tour of the Remote Control
CLEAR Button
DVD-Video, DVD-Audio
VCD
· To clear the markers.
· To clear the numbers
· To clear the markers.
· To clear the numbers
entered incorrectly.
· To cancel the A point
for A-B Repeat.
MENU Button
entered incorrectly.
· To cancel the A point
for A-B Repeat.
· To call up the menu on
(Super Audio CD, CD) · To clear the numbers
entered incorrectly.
entered incorrectly.
· To cancel the A point · To cancel the A point
for A-B Repeat.
for A-B Repeat.
(Super Audio CD, CD)
· To clear the numbers
(MP3, JPEG, WMA)
· To return to the first item
· To call up the top
in the highest hierarchy
of the file list.
(MP3, JPEG, WMA)
menu on a disc.
DivX®
· To clear the markers.
· To call up the file list.
a disc.
TOP MENU Button
Super Audio CD, CD,
MP3, JPEG, WMA
· To call up the file list.
· To return to the top file
in the highest hierarchy
of the file list.
ENTER, Cursor Buttons
RETURN Button
· To move the cursor
· To move the cursor
· To move the cursor
· To move the cursor
and determine its
position.
and determine its
position.
and determine its
position.
and determine its
position.
· To return to the
previous operation in
the setup menu.
SETUP Button
· To call up the setup
menu.
SKIP Buttons
· To skip titles/chapters/
tracks.
· To search forward/
SEARCH Buttons
backward through a disc.
· To begin slow forward/
slow reverse.
(DVD-Video)
· To return to the
previous operation in
the setup menu.
· To call up the setup
menu.
· To return to the
previous operation in
the setup menu.
· To call up the setup
menu.
· To skip tracks.
· To search forward/
backward through a
disc.
· To begin slow forward.
· To skip tracks.
· To begin fast forward/
reverse search.
(except JPEG)
· To return to the
previous operation in
the setup menu.
· To call up the setup
menu.
· To skip tracks.
· To search forward/
backward through a
disc.
· To begin slow forward.
STOP Button
· To stop playback.
· To stop playback.
· To stop playback.
· To stop playback.
· To begin playback.
· To begin playback.
· To begin playback.
· To begin playback.
· To pause playback.
· To advance playback
· To pause playback.
· To pause playback.
· To advance playback
PLAY Button
STILL/PAUSE Button · To pause playback.
· To advance playback
frame by frame.
GROUP Button
frame by frame.
frame by frame.
· To begin playback from
a desired group.
(DVD-Audio)
SUPER AUDIO CD
SET UP Button
PAGE Buttons
· To select the Super
Audio CD setup.
(Super Audio CD)
· To select a desired
background display
image for playback.
(DVD-Audio)
– 10 –
EN
FUNCTIONAL OVERVIEW
Displays a type of the disc which is on the tray.
• DVD: DVD-Video, DivX®
• DVD A: DVD-Audio
• SACD: Super Audio CD
• CD: VCD, Audio CD, MP3, JPEG, WMA, DivX®
Lights up when the repeat function is on.
Lights up when the ALL repeat function is on.
Lights up when the A-B repeat function is on.
Lights up when the progressive scan system is activated.
Lights up when the disc playback comes to a pause.
Lights up when playing back in slow mode. (DVD, VCD)
Lights up when the inserted disc is being play back.
The present display state is shown.
• TL./GR.: Title or Group
• TR./CP.: Track or Chapter
To change to the display of a title please
push the DISPLAY button in the state of
Resume.
Lights up when you have selected the
audio file (CD/MP3/WMA/Super Audio
CD/DVD-Audio) on the programme
screen.
Displays the chapter (title) or track number.
In case the chapter (title) or track number is
over 100, displays “– –”.
Displays the elapsed time of the chapter (title) or track.
(The display of 10 hours or more cannot be performed.)
Selected HDMI output mode is displayed.
Displays during Operation
Super Audio CD setup
(2CH AREA) selected
Super Audio CD setup
(MULTI-CH AREA) selected
Programme playback
is set
Programme playback setting
group (folder) is selected
Programme playback setting
ALL CLEAR is selected
Random playback is
set
All group playback
setting
Power on
Power off
Tray open
Tray closed
Loading the Disc
No disc inserted or
cannot read
HDMI output mode
(480p/576p) is
selected. (576p is
displayed after 480p)
HDMI output mode
(720p) is selected
HDMI output mode
(1080i) is selected
HDMI output mode
(1080p) is selected
HDMI output mode
(OFF) is selected
NOTES:
• The front panel display has blinked while setting the
programme playback.
• “P**-●●●” is displayed in the front panel display while
setting the programme playback. (“**” is programme
number, “●●●” is track number.)
• “A” is displayed in front panel display while selecting the
audio file (CD, MP3, WMA, Super Audio CD, DVD-Audio).
• “F-***” is displayed in the front panel display while selecting
the group (folder). (“***” is group (folder) number.)
• “A-CLEAr” is displayed in the front panel display while
selecting ALL CLEAR.
• “SHUFFLE” is displayed in the front panel display while
setting the random playback.
• “A-PLAY” is displayed in the front panel display while
setting the all group playback.
– 11 –
EN
English
Front Panel Display
CONNECTIONS
Description - Rear Panel
1
2
3
4
5
6
7
8
1. DIGITAL OUT Jacks (OPTICAL, COAXIAL)
Use either an optical or coaxial digital cable (commercially available) to connect to an AV amplifier with a built-in
decoder (AV control centre).
2. AUDIO OUT Jacks
Use an Audio cable to connect to the Audio input jacks of A/V-compatible TV, wide screen TV or Stereo system.
3. HDMI OUT Jack
Use an HDMI connection cable (commercially available) to connect to a display with an HDMI compatible port.
4. VIDEO OUT Jack
Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV, wide screen TV or Stereo system.
5. COMPONENT VIDEO OUT Jacks
Use a Component Video cable (commercially available) to connect these jacks if you have a TV with Component Video
in jacks. These jacks provide CB/PB, CR/PR and Y video. Along with S-Video, Component Video provides the best quality
picture.
6. S-VIDEO OUT Jack
Use an S-Video cable (commercially available) to connect this jack to the S-Video jack on your A/V-compatible TV or wide
screen TV for a higher quality picture.
7. AV1 Jack
Use a Scart cable (commercially available) to connect to the 21-pin scart jack of a TV.
8. 5.1ch AUDIO OUT Jacks
Use speaker cables (commercially available) to connect these jacks to the 5.1ch Audio input jacks of your AV amplifier with
5.1-channel input terminals.
NOTE:
• When changing the VIDEO OUT setting (SCART, COMPONENT INTERLACE or COMPONENT PROGRESSIVE), connect
to a Video jack or an S-Video jack on the TV. If the setting is changed, for example, to SCART while Component Video
jacks are connected to the TV, a distorted video signal may be output (refer to page 29).
CAUTION:
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the player.
Selecting Progressive Scan (480p/576p or Interlaced 480i/576i) Playback
• If your TV is compatible with progressive scanning (480p/576p), connect the TV to the COMPONENT VIDEO OUT jacks of
the DVD player and set VIDEO OUT to COMPONENT PROGRESSIVE in the display setting. Next, set your TV to the progressive scan mode. Refer to page 29 for instructions on changing the display setting. P.SCAN will appear on the display of
the unit.
• If your TV is not compatible with progressive scan, set VIDEO OUT to COMPONENT INTERLACE by changing the display
setting (refer to page 29). Make sure that P.SCAN on the display of the unit lights off.
• Use a commercially available adaptor if the video input jacks of your TV or monitor is the BNC type.
What is Progressive Scanning?
• Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (480i/576i) television signals.
The DCDi (Directional Correlational Deinterlacing) system of this DVD player produces smooth and natural video images, even if really dynamic, by eliminating the jagged edges. *“DCDi” is a trademark of
Faroudja, a division of Genesis Microchip Inc.
– 12 –
EN
The following shows examples of connections commonly used to connect the DVD player to TV and other components. If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround
format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL
OUT jacks. By connecting the player to a Dolby Digital, DTS or MPEG decoder, you can enjoy more convincing, realistic ambience with powerful and high-quality surrounding sound of a professional standard which can
be heard in movie theatres. Use an Optical (commercially available) or Audio Coaxial Digital cable (commercially available) for the audio connections.
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Connection to an Audio System
Method 1
Method 2
AV amplifier with a built in decoder
(AV control centre),
Dolby Digital decoder,
DTS decoder, MPEG decoder,
MD deck or DAT deck
Stereo system
AUDIO
DVD
Audio Input
Jacks
Digital Audio
Input Jacks
Audio cable
(supplied)
Optical cable
(commercially
available)
AUDIO OUT
(analogue)
or
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL OUT
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + AV amplifier with a built in decoder (AV control centre), Dolby Digital decoder, DTS decoder,
MPEG decoder, MD deck or DAT deck
NOTES (for Method 2 only):
• When using an AV amplifier with a built-in decoder (AV control centre), Dolby Digital, DTS, or MPEG decoder as shown in
the Method 2, set DOLBY DIGITAL, DTS or MPEG to BITSTREAM accordingly for audio output in the setup menu (refer to
page 30). Set it to PCM for the decoder that is not used currently. Playing back a DVD using incorrect settings may generate
noise distortion, and may also damage the speakers.
• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
• Set DOLBY DIGITAL, DTS and MPEG to PCM, for audio output in the setup menu for connecting to an MD deck or DAT
deck (refer to page 30).
• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played back while
using a decoder, etc., that is not DTS-compatible.
• When playing back a copyright-protected 96kHz (88.2kHz) linear PCM DVD, the digital sound will be down sampled at
48kHz (44.1kHz), even if you set LPCM SELECT to OFF (refer to page 30).
• Super Audio CD sound is not output from the DIGITAL OUT jacks.
Optical cable (commercially available)
• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15 cm or more when storing them.
• Use a cable which is 3 m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
– 13 –
EN
English
CONNECTIONS
CONNECTIONS
Connection to 5.1-channel Surround Sound System
Analogue 5.1-channel audio signals can be output from the DVD player.
The multichannel audio signals recorded in packed PCM and the multichannel Super Audio CD can be played
back when an AV amplifier equipped with analogue 5.1-channel audio inputs is connected.
Front speaker Centre speaker
(left)
Front speaker
(right)
AUDIO
Subwoofer
Surround
speaker
(left)
AV amplifier
with
5.1-channel
audio input jacks
Surround
speaker
(right)
To 5.1-channel
Audio Input
Jacks
Speaker
Cable
(commercially
available)
DVD
5.1ch
AUDIO OUT
NOTES:
• For 5.1-channel connections, set ANALOG AUDIO to MULTI CHANNEL in the setup mode and adjust Speaker Configuration,
DELAY TIME and CHANNEL LEVEL settings (refer to pages 31-32).
• You can enjoy high-quality analogue sound by cutting off the video signal. Press the PURE DIRECT button on the front
panel.
– 14 –
EN
CONNECTIONS
Method 1
Basic
Connection
Method 2
Good
picture
Basic
Audio
Method 3
Better
picture
Method 4
Best picture
COMPONENT
VIDEO IN
21-pin Scart jack
R
TV
Scart Cable
(commercially
available)
English
Connection to a TV (for video)
Audio
Cable
(supplied)
L
Video Cable
(supplied)
S-Video Cable
(commercially
available)
and
CR/PR
S-VIDEO IN
VIDEO IN
or
Y
CB/PB
Component
Video
Cable
(commercially
available)
or
DVD
AV1 OUT
•
•
•
•
Method
Method
Method
Method
1
2
3
4
AUDIO OUT
(analogue)
VIDEO OUT
S-VIDEO OUT
COMPONENT
VIDEO OUT
DVD Player + TV with 21-pin Scart Input Jack
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
DVD Player + TV with Component Video Input Jacks
NOTES:
• Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
• S-Video output connector
The video signals are divided into colour (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector, we recommend connecting it to this unit’s S-Video output connector
using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
Even if your TV does not have RCA type audio and video input jacks, it is still possible to connect this DVD
player to your TV’s 75 ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator (commercially available). Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF
Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial
antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE:
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
– 15 –
EN
CONNECTIONS
Connection to a TV with an HDMI Compatible Port
A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (HighDefinition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other
sources, DVD-Video, and the multi-channel sound of DVD-Audio.
A display equipment with an HDMI compatible port
To HDMI Input
Connector
HDMI cable
(commercially available)
C Actual output modes by media
DivX®
Audio Recording Format
Dolby Digital
DTS
MPEG
LPCM
LPCM or PPCM
(with CPPM) *3 *5
LPCM or PPCM
(without CPPM)
Dolby Digital
MP3/MP2
Audio CD
Video CD
MP3/WMA
Super
Audio
CD
MULTI-CH AREA *4
2CH AREA *4
CD AREA
DVD-Video
DVD-Audio
HDMI AUDIO Setting
2 CHANNEL
MULTI CHANNEL
DOLBY DIGITAL/DTS/MPEG Setting DOLBY DIGITAL/DTS/MPEG Setting
BITSTREAM *1
PCM
BITSTREAM *1
PCM *2
Dolby Digital
Dolby Digital
2 channel PCM
Multi PCM
DTS
2 channel PCM
DTS
Multi PCM
MPEG
2 channel PCM
MPEG
Multi PCM
2 channel PCM
2 channel PCM
Multi PCM
Multi PCM
2 channel PCM
2 channel PCM
Multi PCM
Multi PCM
2 channel PCM
2 channel PCM
Multi PCM
Multi PCM
Dolby Digital
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
Dolby Digital
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
*1 If the connected equipment is not compatible with HDMI BITSTREAM, signals are output on PCM.
*2 If the connected equipment is not compatible with HDMI Multi PCM, signals are output on down mixed PCM.
*3 If the connected equipment is not compatible with HDMI ver. 1.0, signals are not output.
*4 Sounds recorded on the MULTI-CH/2CH AREA of Super Audio CDs are not output.
*5 Transfer of signal from DVD audio discs that are copyright-protected by CPPM is only possible if both devices are HDMI Ver.1.1 compatible.
This player is HDMI Ver.1.1 compatible.
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display
equipment (or an AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content Protection
System). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV equipment.
This player supports HDCP. Please read the operating instructions of your display equipment (or AV amplifier) for more information.
*HDMI: High-Definition Multimedia Interface
NOTES:
• When using HDCP-incompatible display equipment, the image will not be viewed properly.
• When the PURE DIRECT button on the front panel is turned on, not only HDMI images but sounds are not output (refer to page 17).
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this player cannot be controlled by another device vice the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may
be limited by the equipment that is connected.
• When playing a Super Audio CD with an HDMI connection, audio cannot be transferred beyond the CD layer. Make an analogue connection for this.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with
equipment such as this, audio signals are not output from the HDMI output connector.
• When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable (commercially available), the signals are output in digital RGB.
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.”
– 16 –
EN
DISC PLAYBACK
DVD-V DVD-A VCD
• Video and audio signals may be distorted temporarily
when switching to/from the HDMI output mode.
• Use a display equipment with an HDMI-compatible
port.
• The unit is sending Progressive video signal and HDMI
signal simultaneously when HDMI mode is set to ON. If
you connected component video cable to your TV,
which is not compatible with progressive scan, the distorted picture will be output.
• The HDMI indicator on the front panel flashes when
you select the HDMI output mode but there is no HDMI
cable.
• If you turn on the pure direct mode, both video and
audio signals through the HDMI output will be cut off
(press the PURE DIRECT button again to recover).
• You can check the HDMI connection status by pressing
the DISPLAY button during playback with the HDMI
output mode (refer to page 26).
• If the TV is not compatible with newly selected HDMI
output mode, the actual output mode will be kept the
one before changing the selection. When this occurs,
the newly selected mode will appear on the front panel
display (see page 11) while the actual output resolution
will be indicated by performing the on-screen display as
described in NOTE FOR HDMI DISPLAY on page 27.
• Actual output signals for each HDMI mode vary with
the compatibility of the connected display device.
• You cannot select the HDMI output mode when the
setup menu is on the TV screen.
Super
Audio CD
CD
MP3
JPEG WMA DivX®
Getting started
• Turn on the power of the TV, amplifier and any other components which are connected to the DVD player.
• Make sure the TV and audio receiver (commercially available) are set to the correct channel.
1 Press the POWER ON button.
• P-ON will appear briefly on the display panel.
2 Press the OPEN/CLOSE button
to open disc loading tray.
3 Place the disc on the tray, with
the label facing up.
4 Press the PLAY button.
• The tray will close automatically, then playback will start
from the first chapter or track of the disc. If the playback
does not start automatically, press the PLAY button.
• When you play back the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title Menu”
on page 18.
5 Press the STOP button to stop playback.
NOTES:
• A “prohibited icon” may appear at the topright on the TV screen during operation,
warning that a prohibited operation has
been encountered by the DVD player or the
disc.
• With DVDs that use some titles for playback programme
signals, playback may start from the second title, or it may
skip these titles.
• During the playback of two layered disc, pictures may stop
for a moment. This happens when the 1st layer switches to
the 2nd layer. This is not a malfunction.
• The operation may vary when you play back DVDs with
disc menu or Video CDs with PBC. Refer to the manual
accompanying the disc for details.
Pure Direct Mode
1 Press the PURE DIRECT button on the front panel
to output an analogue audio signal only (no analogue video and HDMI signals will be output and
the display will be turned off). The higher quality
sound will be achieved.
NOTES:
• When the buttons below are pressed, the pure direct
mode will be released.
OPEN/CLOSE button (on both the remote and the front
panel), SETUP or DISPLAY button (on the remote),
ON/STANDBY or PURE DIRECT button (on the front
panel).
• The PURE DIRECT button will not function while displaying the setup menu.
• If you turn on the pure direct mode while selecting
HDMI mode, both video and audio signals will not be
output.
CANCELLING AND CALLING BACK PBC FUNCTION
VCD
1 Insert a Video CD.
2 Press the STOP button.
3 Press the Numeric buttons to enter the desired
Track number.
• PBC function is now cancelled and the playback of the
Video CD will start.
4 To call back PBC function, press the STOP button
twice, and then press the PLAY button.
Brightness of the Front Panel Display
1 Press the DIMMER button on the front panel to
select the desired brightness of the front panel display. (BRIGHT, DIMMER or OFF)
• The title menu will appear on the TV screen.
HDMI Setup
• The default setting is BRIGHT.
1 Press the HDMI button on the front panel to select
NOTES:
the HDMI output mode.
The output mode changes as follows every time
the HDMI button is pressed.
• The HDMI indicator on the front panel lights up when
HDMI output mode is on.
480P/576P
720P
1080
1080P
• The brightness of the front panel display can be adjusted from the setup menu. Details are on page 33.
• When you turn on the power next time, the brightness
of the front panel display will be as set in setup menu.
OFF
480P/576P (Default) :
Video output from the HDMI OUT jack at 480p/576p.
720P: Video output from the HDMI OUT jack at 720p.
1080: Video output from the HDMI OUT jack at 1080i.
1080P: Video output from the HDMI OUT jack at 1080p.
OFF : No video outputs from the HDMI OUT connector.
– 17 –
EN
English
NOTES:
Basic Playback
DISC PLAYBACK
NOTE:
General Features
• “A-PLAY” is displayed in the front panel display at
step 1 .
DVD-V DVD-A
DVD may contain menus to navigate the disc and access special features. Press the appropriate Numeric buttons or use
the Cursor buttons (K / L / s / B) to highlight your selection
in the DVD main menu and press the ENTER button to confirm.
NOTE:
• Unless otherwise stated, all operations described are
based on remote control use. Some operations can be
carried out using the menu bar on the TV screen.
PLAYBACK FROM A DESIRED GROUP
1 During playback or in the stop
mode, press the GROUP button.
2 Press the Numeric buttons to
select a group.
1/12
• The group will be located and
playback will start.
Disc Menu
PAGE SELECTION
DVD-V
1 Press the MENU button.
• The DVD main menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 If disc menu is available on the disc, audio
language, subtitle options, chapters for the title and
other options will appear for selection.
4 Press the Cursor buttons (K / L / s / B) to select
an item, and the ENTER button to confirm the
selection.
Title Menu
DVD-V DVD-A
1 Press the TOP MENU button.
• The title menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 Press the Cursor buttons (K / L / s / B) to select
an item, and the ENTER button to confirm the
selection.
• Playback will begin at the selected title.
Some DVD-Audio discs that include
still images feature a selection of
images you can choose from.
1 During playback, press the
1/12
PAGE + or – button to select a
desired page number to be
displayed.
PLAYBACK OF THE BONUS GROUP
Some discs are recorded with the Bonus Group that can be
played back by entering a password. Refer to the disc jackets.
1 In stop mode, press the
GROUP button to open the
group search screen.
2 Press the Numeric buttons to
select a bonus group number.
DVD-AUDIO
BONUS GROUP
Please enter a 4-digit password.
1
• The password popup window
appears.
3 Press the Numeric buttons to enter the 4-digit
password.
• When the correct password is entered, playback starts
from the top of the bonus group.
NOTES:
VCD
• In some cases the password window is displayed on
the menu screen. Follow the instructions given on the
screen.
• Once the password is entered, playback will be repeated until the disc is removed from the disc tray.
1 When playing back a Video CD with PBC function,
the title menu will appear automatically.
2 Press the Numeric buttons to select the desired title.
• Playback will begin at the selected title.
3 Press the RETURN button to go back to the title menu.
CALLING UP A MENU SCREEN DURING PLAYBACK
Still / Pause
DVD-V DVD-A VCD
DVD-V DVD-A
• Press the MENU button to call up the DVD main menu
(DVD-V).
• Press the TOP MENU button to call up the title menu.
Super
Audio CD
CD
MP3
JPEG WMA DivX®
1 During playback, press the
STILL/PAUSE button.
F
• Playback will pause and sound
will be muted.
NOTE:
• Contents of menus and corresponding menu operations may vary among discs. Refer to the manual
accompanying the disc for details.
2 To continue playback, press the PLAY button.
NOTE:
• On DVDs, set STILL MODE to FIELD on the display
menu if pictures in the pause mode are blurred (refer to
page 29).
DVD Audio Playback
DVD-A
PLAYBACK OF ALL GROUPS
1 In stop mode, press the MODE
button.
• The ALL GROUP screen
appears.
ALL GROUP
DVD-AUDIO
TOTAL 2:05:55
All Group Playback
--no indication--
2 Press the PLAY button to
begin playback.
– 18 –
EN
Resume
Super
Audio CD
DVD-V DVD-A VCD
CD
MP3
JPEG WMA DivX®
4 To return to normal playback, press the PLAY button.
NOTES:
• On DVDs, set STILL MODE to FIELD on the display
menu if pictures in the slow playback mode are blurred
(refer to page 29).
• Only Slow Forward is available when playing back
Video CD and discs with DivX® files.
1 During playback, press the
Resume ON
STOP button.
• Resume message will appear
on the TV screen.
2 Press the PLAY button,
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Step by Step Playback
<Example: DVD>
DVD-V DVD-A
playback will resume from
the point at which playback was stopped.
VCD
1 During playback, press the
• To cancel resume, press the STOP button again.
F
STILL/PAUSE button.
NOTES:
• Some Video CDs with PBC function resume playback
from the beginning of the track.
• For MP3, JPEG or WMA, playback will resume from the
beginning of the current track.
• The resume information will be saved on even when
the power is turned off.
• Playback will pause and sound
will be muted.
2 The disc advances frame by frame each time the
STILL/PAUSE button is pressed.
3 To exit step by step playback, press the PLAY button.
NOTE:
• On DVDs, set STILL MODE to FIELD on the display
menu if pictures in the pause mode are blurred (refer to
page 29).
Fast Forward / Reverse Search
DVD-V DVD-A VCD
Super
Audio CD
DivX®
Only Moving Picture
CD
MP3
WMA DivX®
Picture Control
DVD-V DVD-A
1 During playback, press the h or g button repeat-
edly to select a desired forward or reverse speed.
• For DVDs, fast forward or reverse search speed is different depending on the disc.The approximate speed is
1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
VCD
DivX®
Picture Control adjusts Brightness, Contrast, Color, Gamma
Correction and Sharpness of the specific display.
1 During playback, press the
MODE button.
BRIGHTNESS
s +1B
2 Press the Cursor buttons
Button
1
2
3
4
5
(K or L) to switch among items.
3 Press the ENTER button or the Cursor buttons
(s or B) to adjust the selected item to a desired
level.
Button
1
2
3
4
5
• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be
selected.
• For Video CDs, Super Audio CDs, Audio CDs, MP3,
WMA and DivX®, the approximate speed is 1(x2), 2(x8)
and 3(x30).
• For Super Audio CDs, Audio CDs, MP3 and WMA,
sound will be output at any speed of fast forward and
reverse search.
4 To return to normal playback, press the RETURN
button.
NOTES:
2 To return to normal playback, press the PLAY button.
NOTE:
• For some DivX® files, Fast Forward/Reverse Search
may not function.
• The default settings for all items in Picture Control are
“0”.
• The setting display will disappear in 10 seconds of no
use.
• This function cannot be used during Dialog Speed
(refer to page 20).
• If you return all items to the default settings, please
execute initialise.
Slow Forward / Slow Reverse
DVD-V DVD-A
Only Moving Picture
1 During playback, press the
VCD
DivX®
D Button
1
STILL/PAUSE button.
2 Press the h or g button.
• Slow motion playback will begin and
sound will be muted.
2
3 Press the h or g button
repeatedly to select a desired
speed.
3
• Slow forward or reverse speed is different depending on the disc.
The approximate speed is 1(1/16), 2(1/8), and 3(1/2).
– 19 –
EN
English
DISC PLAYBACK
DISC PLAYBACK
Slide Show Mode
3 Use the Cursor buttons (K / L / s / B) to move
the zoomed picture across the screen.
JPEG
You can switch to slide show mode during playback.
1 Press the MODE button once during playback.
• The slide show mode screen will appear.
• You cannot switch the slide show mode when it is
stopped, or from the file list screen or the Picture CD
menu screen.
2 Press the ENTER button.
• The slide show mode will change.
CUT IN/OUT: The entire image appears in one time.
FADE IN/OUT: The image appears and disappears
gradually.
3 Press the MODE button to exit.
Title / Chapter Search
4 To exit the zoom mode, press the ZOOM button.
DVD-V
NOTES:
• Zoom function does not work while the disc menu is
shown.
• x4 zoom is not available on some discs.
• Navigation screen is not available on JPEG.
• You cannot pan through the zoomed picture on some
JPEG files.
By using the SEARCH MODE button
1 Press the SEARCH MODE but-
ton repeatedly until the chapter search or the title search
screen appears during playback.
2 Enter the desired chapter/title
number with the Numeric buttons.
/29
By using the SKIP buttons H G
During playback, press the SKIP G button to move to the
next chapter. Press it repeatedly to skip to subsequent chapters. Press the SKIP H button to go back to the beginning
of the current chapter. Press it repeatedly to go to the previous chapters.
• Chapter number will appear briefly on the front display panel.
• If the SKIP H or G button is pressed while the playback
is paused, the playback after skipping to the next chapter will
be also paused.
NOTES:
• Depending on the disc, the Numeric buttons can be
used to search for a desired chapter by entering the
chapter number directly. Refer to the manual accompanying the disc.
• The SKIP H and G buttons are not available when
playback is stopped.
• A disc that does not contain chapters within titles, the
SKIP H and G buttons change the titles.
– 20 –
EN
DISC PLAYBACK
DVD-A VCD
Marker Setup Screen
Super
Audio CD
CD
MP3 JPEG
WMA DivX®
There are two ways to begin playback a disc at a specific
track.
By using the SEARCH MODE button
1 Press the SEARCH MODE but__/ 15
ton.
• The track search display
appears.
2 Within 30 seconds, select a desired track number using
the Numeric buttons.
• For the disc with less than 10 tracks, press the track
number directly.
• For discs with 10 or more but less than 100 tracks, to
play back a single-digit track, press 0 first, then the
track number (e.g. for track 3, press 0, 3). To play back
a double-digit track, press the track number.
• For discs with 100 or more tracks, to play back a single- or a double-digit track, press 0 first, then the track
number (e.g. for track 3, press 0, 0, 3, and for track 26,
press 0, 2, 6). To play back a triple-digit track, press the
track number.
• Press the CLEAR button to erase the incorrect input.
DVD-V DVD-A
• The title or track and elapsed playback time will
appear on the TV screen.
4 To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
Cursor buttons (s or B) to choose a desired
marker, then press the ENTER button.
5 Press the SEARCH MODE or RETURN button to
exit.
NOTES:
• Opening the disc tray, turning off the power, or selecting AC at step 2 and pressing the ENTER button will
erase all Markers.
• To clear a marker, using the Cursor buttons (s or B)
button, select the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
Repeat
By using the SKIP buttons H G
During playback, press the SKIP G button to move to the
next track. Press it repeatedly to skip to subsequent tracks.
Press the SKIP H button to go back to the beginning of the
current track. Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the front panel display.
• If the SKIP H or G button is pressed while the playback
is paused, the playback will be paused again after skipping
to the next track.
NOTE:
• The SKIP H and G buttons are not available when
playback is stopped.
• The REPEAT button is available only during playback.
REPEAT TITLE / CHAPTER
DVD-V
To activate Repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
OFF
(repeat off)
Time Search
CD
CD
button repeatedly until the
-- --:--:-display screen and Markers
appear during playback.
2 Press the Cursor buttons (s or B) to select the
number of the marker (1-10) and ensure that
“_ _ _ _ : _ _ : _ _” appears on the display.
3 When the disc reaches the point where you want
to remember, press the ENTER button.
• The +10 button can also bring up the track search display except for the disc with less than 10 tracks. For
such a disc, track search can be done by just pressing
the track number.
Super
Audio CD
Super
Audio CD
You can use markers to memorise your favourite places on
a disc.
1 Press the SEARCH MODE
1 2 3 4 5 6 7 8 9 10 AC
NOTE:
DVD-V DVD-A VCD
VCD
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
DivX®
1 Press the SEARCH MODE
NOTES:
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
1:23:45
-:--:-button until the time search
screen appears on the TV
screen.
2 Within 30 seconds, enter a desired time point on
the disc with the Numeric buttons.
• Playback will start at the specified time.
• For Time Search, “0” appears automatically when there
is no need to enter a number. For example,
“0:0_:_ _” appears on the time search screen if the total
time of the title or track is less than 10 minutes.
3 Press the CLEAR button to erase an incorrect
input.
NOTE:
• For some DivX® files, Time Search may not function.
– 21 –
EN
English
Track Search
DISC PLAYBACK
REPEAT TRACK / GROUP / ALL
VCD
Super
Audio CD
Programme Playback
CD
To activate Repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
OFF
(repeat off)
TRACK
(current track repeat)
This function allows you to programme a playback order of
DVD-Audio, Super Audio CD, Audio CD, MP3, JPEG or WMA
in a desired sequence.
DVD-A
1 In stop mode, press the MODE
button repeatedly until the programme screen appears.
ALL
(entire disc repeat)
PROGRAM
DVD-AUDIO
G
• The group selection screen will
appear.
OFF
(repeat off)
MP3
TRACK
(current track
repeat)
JPEG
WMA
• The track selection screen will be displayed.
• It takes approximately 5 seconds until the track selection screen appears.
3 Press the Cursor buttons (▲ or ▼) to select a
track, then press the ENTER button.
• Press the CLEAR button to erase the most recently
entered track.
• Press the Cursor button (s) to go back to the group
selection screen from the track selection screen.
DivX®
GROUP
ALL
(current folder
repeat)
(entire disc
repeat)
1 1:02:25
(▲ or ▼) to select a group,
then press the ENTER button.
NOTES:
DVD-A
1/1
1/1
G
2 Press the Cursor buttons
• In the track repeat, repeat setting will be cleared when
moving to other track.
• Repeat playback does not function during A-B repeat
playback.
• Repeat playback is not available when playing back the
Video CD with PBC function.
TOTAL 0:00:00
1 1:02:25
2 1:03:30
ALL CLEAR
G
4 Press the PLAY button to play back the pro-
grammed tracks.
Super
Audio CD
CD
1 In stop mode, press the MODE
button.
• In the track or group repeat, repeat setting will be
cleared when moving to other track or group.
• For DVD-Audio, ALL repeat is effective only when all
groups are being played back.
• For DVD-Audio, repeat playback is not available when
playing back the Video CD with PBC function.
PROGRAM
CD-DA
• The programme screen will
appear.
NOTES:
2 Press the Cursor buttons
(▲ or ▼) to select a track, then
press the ENTER button.
T
T
T
T
T
T
1
2
3
4
5
6
7
T
1 3:30
T
3:30
4:30
5:00
3:10
5:10
1:30
2:30
1/2
TOTAL 0:03:30
T
1 3:30
1/1
• Press the CLEAR button to erase the most recently
entered track.
3 Press the PLAY button to start programmed play-
back.
A-B REPEAT
DVD-V DVD-A VCD
Super
Audio CD
CD
MP3
DivX®
JPEG
WMA
1 In stop mode, press the MODE
1 Press the A-B REPEAT but-
button.
A-
• The programme screen will
appear.
ton at your desired starting
point.
•
2 Press the Cursor buttons
A- appears briefly on the TV screen.
2 Press the A-B REPEAT button
A-B
• A track selection screen appears.
3 Press the Cursor buttons
A-B appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit the sequence, press
MY COLLECTION
ABC
DEF
GHI
ALL CLEAR
1/1
1/1
ABC
(K or L) to select a group,
then press the ENTER button.
again at your desired end
point.
•
PROGRAM
(K or L) to select a track, then
press the ENTER button to
save it in a programme.
OFF
the A-B REPEAT button.
ABC
DEF
GHI
JKL
MNO
ALL CLEAR
2/2
1/1
DEF
• Press the CLEAR button to
erase the most recently entered
track.
• The programmed track is displayed in the right-hand screen.
• If the entire programme cannot
be displayed on the screen, “L”
appears.
• Pressing the Cursor button (s)
will show a list of folders that belong to the hierarchy
which is one-level higher than the currently selected
folder.
NOTES:
• The A-B Repeat section can only be set within the current title (for DVD-Video), or current track (for DVDAudio, Video CD, Super Audio CD, Audio CD and disc
with DivX® files).
• A-B Repeat playback is not available with some scenes
on DVD.
• To cancel the A point which was set, press the CLEAR
button.
• A-B Repeat playback does not function during title,
chapter, track, group or all repeat playback.
• For some DivX® files, A-B Repeat playback may not
function.
PROGRAM
PROGRAM
ABC
DEF
GHI
JKL
MNO
ALL CLEAR
2/2
DEF
1/1
DEF
4 Press the PLAY button to start programmed play-
back.
• During the display of the programme screen, press the
RETURN button, and the stop screen will show up with
the programme contents in memory.
– 22 –
EN
DISC PLAYBACK
NOTES:
MP3 / JPEG / WMA Playback
MP3
NOTES:
Random Playback
DVD-A
1 In stop mode, press the
RANDOM
DVD-AUDIO
• The random screen will appear.
G
G
G
ALL
1 0:44:44
2 0:03:26
2 Press the Cursor buttons
(▲ or ▼) to select a desired
group to play back randomly,
then press the ENTER or
<Example: DVD-Audio>
PLAY button.
1/1
G
ALL
• Random playback will start.
Super
Audio CD
CD
MP3
JPEG
WMA
1 In stop mode, press the
RANDOM button.
• The random screen will appear.
RANDOM
CD-DA
WMA
When a CD-R or CD-RW disc with MP3, JPEG or WMA files
is inserted in the DVD player, the file list will appear automatically on the TV screen. The number of tracks is also displayed on the front panel.
1 Press the Cursor buttons (K or L) to select a desired
group (folder) or track.
• To return to the previous screen, press the Cursor button (s).
• If a group (folder) is selected, press the Cursor button
(B) or ENTER button to go on to the track selection
screen. Press the Cursor buttons (K or L) to choose a
track, then press the PLAY or ENTER button.
• If a track is selected, press the PLAY or ENTER button
to start playing back tracks. The selected track and the
subsequent tracks will be played back.
• When selecting the folders
B) when you want to go to
–Press the Cursor button (B
the next hierarchy.
–Press the Cursor button ({) when you want to go
back to the previous hierarchy (except for the top hierarchy).
• Press the TOP MENU button to return to the first item.
2 Press the STOP button to stop playback.
This function shuffles the playback order instead of playback
in the original sequence.
RANDOM button.
JPEG
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
• Folders are known as Groups; files are known as Tracks.
• A symbol of
is shown on the top of the group name.
• A symbol of
is shown on the top of MP3 files.
• A symbol of
is shown on the top of JPEG files.
• A symbol of
is shown on the top of WMA files.
• Maximum of 255 folders can be recognised.
• Maximum of 999 files can be recognised.
• Up to 8 hierarchies can be recognised.
• If the track extends beyond the scope of screen, a
down arrow “L” appears, indicating that the user can
view another part on the previous page. The current
page number and the number of total pages are shown
on the left of the down arrow “L”.
• If no MP3, JPEG or WMA files are found in the group,
the group is not displayed.
• The DVD player can reproduce data recorded as per
ISO 9660 Level 1, Level 2 or Joliet on the disc.
• It can also run a disc on which data is recorded in a
multi-session.
• For more details of recording systems, refer to the
instruction manual for the CD-R / CD-RW drive or the
writing software.
• For MP3 and WMA files recorded in Variable Bit Rate
(VBR), the unit may not display the actual elapsed
time.
2 Press the PLAY button to start
random playback.
<Example: Audio CD>
NOTES:
• To repeat the current track in the random selection,
press the REPEAT button repeatedly until
TRACK
appears during playback. To repeat the entire random
selection press the REPEAT button repeatedly until
ALL appears during playback.
• You cannot go back to the previous track during random playback.
• For a disc containing mixed MP3, JPEG and WMA
files, random playback of those files will be performed.
• “SHUFFLE” is displayed on the front panel display at
step 1 .
– 23 –
EN
English
• Press the STOP button once and then the PLAY button
again, playback will restart from the point where the
STOP button was pressed. (Programme continued.)
• Press the STOP button twice and then the PLAY button
again, playback will restart from the first track in the
usual way. Your programme is still stored until either the
disc tray is open or power is turned off.
• Up to 99 tracks can be entered.
• To erase tracks in the programme all together, select
ALL CLEAR at the bottom of the list at step 2 and,
“A-CLEAr” is displayed on the front panel display at that
time.
• To repeat the current track in the programme, press the
REPEAT button repeatedly until
TRACK appears
during playback. To repeat the entire programme, press
the REPEAT button repeatedly until
ALL appears
during playback.
• If eight or more tracks were set in a programme, use
the SKIP H or G button to see all the tracks.
• When selecting the folder:
–Press the Cursor button (B) when you want to go to
the next hierarchy.
–Press the Cursor button ({) when you want to go
back to the previous hierarchy (except for the top hierarchy).
• Even if an inserted disc contains mixed MP3, JPEG
and WMA files, 99 tracks in combination of MP3, JPEG
and WMA files can be entered.
• The front panel display has blinked while setting the
programme playback.
• “F-***” is displayed in the front panel display while
selecting the group (folder). (“***” is group (folder) number.)
DISC PLAYBACK
This player recommends the use of files recorded at the following specifications:
Applicable MP3 file
Sampling
frequency
44.1kHz
48kHz
Type
MPEG1
audio layer 3
Remarks
• It is prohibited to record
MP3 sound on a digital
device when the connection
is made digitally.
• MP3 files recorded at fixed
bit rate of 32kbps or higher
are recommended.
Kodak Picture CD
The DVD player can also run JPEG files stored on Kodak
Picture CDs. You can enjoy picture images on the television
set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that provides
photo developing service of Kodak Inc.
1 When Kodak Picture CD is
inserted in the DVD player,
Kodak Picture CD menu
appears automatically on
the TV screen.
Applicable JPEG file
Remarks
Upper limit:
• A JPEG image that extends
Size of
6300x5100 dots beyond the screen is
image
Lower limit:
reduced so that it will be
32x32 dots
displayed within the screen.
Type
Remarks
• Those frequencies are
applicable to WMA version 9.
• Ensure that the copyright
48–192kbps
function is set to off when
preparing a WMA disc.
• A prohibition “disable” symbol will appear if the user
attempts to run a non-reproducible file such as copyWMA version 9
right-protected.
• Recorded in Multi-channel
format cannot be played
back.
Information on MP3, JPEG and WMA discs
Picture2
Picture3
Picture4
Picture5
Picture6
• If all menu items cannot be
1/32
displayed on the screen
scope, “G ” appears at the
Current track number /
the number of total tracks
right bottom of the screen,
indicating that the user can view remaining items on
the next page. If “H” appears, it indicates that the
user can view other items on the previous page. The
track number of the currently highlighted item and the
total tracks are shown at the centre bottom of the
screen.
• If “G” is shown at the right bottom, use the SKIP G
button to view the next page. If “H” is shown at the
left bottom, use the SKIP H button to view the previous page.
• It may take some time until all menu items are displayed on the menu screen.
Applicable WMA file
Sampling
44.1kHz
frequency
48kHz
Bit rate
Picture1
2 Press the Cursor buttons (K / L / s / B) to select
• This DVD player can play back images and sounds from
data recorded in MP3 and JPEG formats on CD-R and
CD-RW discs.
• A file with an extension of “.mp3 (MP3)” is called an MP3 file.
• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a JPEG file.
The DVD player can run an image file conforming to the
Exif specification. Exif is a file format, Exchangeable
Image File format established by Japanese Electronic
Industry Development Association (JEIDA).
• A file with an extension of “.wma (WMA)” is called a WMA file.
• Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)” and “.jpeg (JPEG)” or “.wma (WMA)” will not be
listed on the MP3, JPEG or WMA menu.
• If the file is not recorded in MP3, JPEG or WMA format,
noise may be produced even if the file extension is either
“.mp3 (MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma (WMA)”.
• The name of group and track can be displayed up to 25
characters. Unrecognisable characters will be replaced
with asterisks. The ninth and deeper hierarchies cannot
be displayed.
• Unplayable groups or tracks may be displayed depending
on the recording conditions.
• If the TOP MENU button is pressed when a file list is displayed, the first item will be highlighted.
a desired track to be played back, then press the
PLAY or ENTER button.
• If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to the next
one in turn.
3 Press the STOP button to stop playback.
NOTES on JPEG and Kodak Picture CD:
• A track is displayed for 5 or 10 seconds and then the
next track is displayed.
• Every press on the ANGLE button will turn the image
clockwise by 90 degrees when an image is displayed.
• To change the size of the playback image, press the
MODE button twice. The size change mode appears on
top of the TV screen during playback. Then press the
Cursor buttons (s or B) or ENTER button to switch
between NORMAL (100%) and SMALL (95%).
• Progressive JPEGs (JPEG files saved in the progressive format) will not be played back on this DVD player.
• High resolution JPEG files take longer to be displayed.
• The size change mode may have no effect on some
files (e.g. files with a small picture size).
• In stop mode, press the MENU button.
Kodak Picture CD menu appears.
NOTES on WMA:
– 24 –
• The DVD player can reproduce data recorded as ISO
9660 level 2 with 31 characters file name included
punctuation marks. The name of file can be displayed
up to 25 characters.
• Maximum of 8 subfolders can be recognised.
• It can also be displayed tag information of WMA at
least 64 characters.
• A file with an extension of Joliet as Unicode format in
up to 64 characters can be recognised.
• This unit cannot play back copyright protected WMA
files.
EN
• Use the software recognised by DivX®, Inc. when you
make DivX® files.
• When using tools or utilities to make up DivX® files,
read their instruction manual beforehand.
• A DivX® file whose file size exceeds 2GB cannot be
played back.
• If a large-sized DivX® file is selected, it may take a while
to start the playback (over 20 seconds sometimes).
• Constant bitrate of image between 500 kbps and 4,000
kbps is recommended if you make DivX® files on a CDR/RW.
• If DivX® files written on CD discs cannot be played
back, rewrite them on a DVD disc and try to play back.
• For more information for DivX®, please visit: http://www.divx.com
• If you insert a CD-R/RW with DivX® files that are mixed
with MP3, JPEG, or WMA files, the Playback Media
Selection screen will be displayed. Please select Video
and proceed to Step 1 .
DivX® Playback
DivX®
This DVD player can play back DVD-R/RW and CD-R/RW
discs recorded in DivX® format. When a DVD-R/RW or CDR/RW with DivX® files is inserted in the DVD player, the file
list will appear automatically on the TV screen. The number
of tracks will be also displayed on the front panel.
1 Press the Cursor buttons (K or L) to select the
desired group (folder) or track.
• To return to the previous screen, press the Cursor button (s).
• If a group (folder) is selected, press the Cursor button
(B) or ENTER button to go on to the track selection
screen. Press the Cursor buttons (K or L) to choose a
track, then press the PLAY or ENTER button.
• If a track is selected, press the PLAY or ENTER button
to start playing back tracks. The selected track and the
subsequent tracks will be played back.
• When selecting the folders:
B) when you want to go to
–Press the Cursor button (B
the next hierarchy.
–Press the Cursor button ({) when you want to go back
to the previous hierarchy (except for the top hierarchy).
• Press the TOP MENU button to return to the first item.
Please select the media to play back.
Video
Audio & Picture
2 Press the STOP button to stop playback.
NOTES:
• DivX® is a codec (compression/decompression) that
can compress images to a very small amount of data.
The software can compress video data from almost any
sources to the size that can be sent on the Internet
without compromising visual quality of the images.
• A file with an extension of “.avi” or “.divx” is called an
DivX® file. All files with the “.avi” extension are recognised as MPEG 4.
• Files with extension other than “.avi” and “.divx” will not
be listed on the DivX® menu. However, unplayable
groups or tracks may be displayed, depending on the
recording conditions.
• Even if the file has an extension of either “.avi” or
“.divx”, this player cannot play it back if it is recorded in
the format other than DivX®.
• Folders are known as Groups; files are known as tracks.
• A symbol of
is shown on the top of DivX® file.
• Maximum of 255 folders can be recognised.
• Maximum of 999 files can be recognised.
• If the track extends beyond the scope of screen, a
down arrow “L” appears, indicating that the user can
view another part on the previous page. The current
page number and the number of total pages are shown
on the left of the down arrow “L”.
• The name of group and track can be displayed up to 25
characters. Unrecognisable characters will be replaced
with asterisks. The ninth and deeper hierarchies cannot
be displayed.
• You can play back the disc recorded in multi-session.
• Playback will be paused if the file list is displayed during the playback.
• It may take a while for audio and images to be output
after you inserted a disc and pressed the PLAY button.
• When playing back the files recorded in high bit rates,
the images can be interrupted on some occasions.
• Although DivX® logo has been obtained for this player,
it may not be able to play back some data, depending
on the disc characteristics, bit rates, or audio format
settings, etc.
• Press the TOP MENU button to call up the Playback
Media Selection screen in stop mode.
• If you select Audio & Picture, instead of Video on the
Playback Media Selection screen, the DVD player can
play back MP3/JPEG/WMA files. Refer to page 23 for
details.
This player recommends the use of files recorded at the following specifications:
Applicable DivX® file
Plays all
versions of
DivX® video
Playable
(including
Codec of AVI DivX® 6) with
files
standard
playback of
DivX® media
files.
720 x 480
Maximum size @30fps
of image
720 x 576
@25fps
Remarks
• They are recognised as
MPEG 4.
• It is prohibited to record
MP3 sound on a digital
device when the connection
is made digitally.
Sampling
frequency of
audio
8kHz - 48kHz
Audio type
MPEG1 audio
layer 3 (MP3) • MP3 files recorded at fixed
MPEG1 audio bit rate of 32kbps or higher
are recommended.
layer 2
Dolby Digital
– 25 –
EN
English
DISC PLAYBACK
DISC PLAYBACK
DivX® Subtitle
DivX®
The subtitle created by the user can be displayed during
DivX® playback.
4 Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
5 Press the DISPLAY button again to exit.
1 After select the DivX® file, the SUBTITLE LIST will
appear except when the “DivX SUBTITLE” setting
is “OFF”. Refer to “Language Setting” on page 29.
SUBTITLE LIST
FILE :
file name1
[OFF]
[SMI]
[SRT]
[SUB]
FILE LIST : MENU
DVD-A
1 Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current playback status will be displayed.
2 Press the DISPLAY button again.
• Current group number/total groups, elapsed time and
remaining time of the current group, and current playback status will be displayed.
3 Press the DISPLAY button
again.
2 Press the Cursor buttons (K or L) to select the
desired extension you want to display, then press
the ENTER button. DivX® with the subtitle starts
playback. The subtitle cannot be displayed when
the setting is “OFF”.
• If there is more than one extension, the extension
selection appears in the SUBTITLE LIST.
NOTES:
• DivX® subtitle can only be displayed according to the
same name with an extension of the DivX® file name.
• Files whose extension is other than “.SMI”, “.smi”,
“.SRT”, “.srt”, “.SUB” and “.sub” will not be listed in the
SUBTITLE LIST.
• This unit cannot be recognised if the DivX® file and its
subtitle file are not in the one folder.
• The subtitle may not be displayed if the file size is too
large.
• To change the subtitle, refer to “Subtitle Language” on
page 27 if multiple subtitles are available.
• The subtitle cannot display if the on-screen information
is displayed.
• If “DivX SUBTITLE” is set to “OFF” in LANGUAGE
menu, the SUBTITLE LIST will not be displayed even if
you select a DivX® file with created subtitle.
• Unrecognisable characters will be replaced with asterisks.
Changing the On-Screen Display
You can check information about the current disc by pressing
the DISPLAY button.
DVD-V
1 Press the DISPLAY button during playback.
• Current chapter number/total
9/49
0:00:00 -0:03:30
chapters, elapsed time and
remaining time of the current
chapter, and current playback
status will be displayed.
2 Press the DISPLAY button again.
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
3 Press the DISPLAY button for the third time.
• The bit rate (the amount of
video data currently being
T L1
IIIIIII
read) and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
( C: Chapter repeat/ T: Title repeat/
A B: A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being
played back.)
IIIIIII
T
L1
• The bit rate and current playback status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
( T: Track repeat/ G: Group repeat/
A B: A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being
played back.)
4 Press the DISPLAY button again.
• During all group, programme or random playback, each
playback status will be displayed when you press the
DISPLAY button. Then press the DISPLAY button
again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
5 Press the DISPLAY button again to exit.
VCD
Super
Audio CD
CD
1 Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current playback status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/ A: All tracks repeat/
A B: A-B repeat)
2 Press the DISPLAY button again.
• Current track number/total tracks, elapsed time and
remaining time of the entire disc, and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/ A: All tracks repeat/
A B: A-B repeat)
• On Audio CDs, when you are playing back a disc in
programme or random mode,
PROGRAM (or
RANDOM) will be displayed.
3 Press the DISPLAY button again.
• During programme or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
4 Press the DISPLAY button again to exit.
– 26 –
EN
DISC PLAYBACK
JPEG
1 Press the DISPLAY button
2 Press the DISPLAY button
again.
DVD-V DivX®
TRACK 01
during playback.
• Current file name will be displayed.
Audio Language
DivX®
The DVD player allows you to select a language (if multiple
language options are available) during DVD disc playback.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
<Example: MP3>
TR
1/36 0:01:15
T
desired language.
• Current track number/total
tracks and elapsed time (MP3
and DivX®) will be displayed.
• Current repeat setting appears only when the Repeat
setting is active.
( T: Track repeat/ A: All (disc) repeat/ G: Group
repeat/ A B: A-B repeat (DivX® only)).
• When you are playing back a disc with MP3 or JPEG
files in programme or random mode,
PROGRAM
(or RANDOM) will be displayed.
3 Press the DISPLAY button again.
• During programme or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
this page.)
4 Press the DISPLAY button again to exit.
1.ENG Dolby D 3/2.1ch 48k/3
HELLO
2.FRE Dolby D 3/2.1ch 48k/3
Bon jour
3.JPN Dolby D 3/2.1ch 48k/3
NOTES:
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
• Some discs allow to change the Audio Language setting on the disc menu. (Operation varies among discs.
Refer to the manual accompanying the disc.)
• For discs with DivX® files, the screen only displays MP3, MP2 or
Dolby Digital audio. Other audio sounds will be displayed as “---”.
• Pressing the AUDIO button may not work on some DVDs
with multiple audio languages (e.g. DVDs which allow to
change the Audio Language setting on the disc menu).
• If you choose a language that has a three-letter language
code, the code will be displayed every time you change
the Audio Language setting. If you choose any other languages, “---” will be displayed instead (refer to page 34).
• Audio language selection cannot be made during
Dialog Speed (refer to page 20).
• If the disc has no audio language, NOT AVAILABLE will
be displayed.
WMA
1 Press the DISPLAY button
TRACK 01
during playback.
• Current file name will be displayed.
2 Press the DISPLAY button
again.
TITLE NAME
• Title name based on tag information of currently playedback file will be displayed.
3 Press the DISPLAY button
for the third time.
ARTIST NAME
• Artist name based on tag
information of currently
played-back file will be displayed.
4 Press the DISPLAY button
again.
TR
1/36 0:01:15
T
• Current track number/total
tracks and elapsed time will
be displayed.
• Current repeat setting appears only when the Repeat
setting is active.
( T: Track repeat/ A: All (disc) repeat/ G: Group
(folder) repeat).
• When you are playing back a disc in programme or random
mode,
PROGRAM (or RANDOM) will be displayed.
Subtitle Language
DVD-V DivX®
The DVD player allows you to select a subtitle language (if
multiple language options are available) during DVD disc
playback.
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
• Press the Cursor buttons (s or B) to turn on or off
subtitles during playback.
5 Press the DISPLAY button again.
• During programme or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
this page.)
6 Press the DISPLAY button again to exit.
1.ENG/6
Subtitle 1
2.FRE/6
NOTE:
Subtitle 2
• If the file does not contain tag information, NOT AVAILABLE will be displayed.
NOTE FOR HDMI DISPLAY:
• The displayed HDMI status are
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
as follows:
MAX CHANNEL : 2ch
1. Information for image output/
Resolution of image
2. Sound output format
3. Maximum number of audio channels that can be
accepted by the connected equipment
OFF
OFF
3 To turn off the subtitles, press the SUBTITLE but-
ton repeatedly until OFF appears.
– 27 –
EN
English
MP3
DISC PLAYBACK
NOTES:
• Some discs allow the Subtitle Language setting on the
disc menu. (Operation varies among discs. Refer to the
manual accompanying the disc.)
• Pressing the SUBTITLE button may not work on some
DVDs with multiple subtitle languages (e.g. DVDs which
allow the Subtitle Language setting on the disc menu).
• If your desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have
subtitles in that language.
• If you choose a language that has a three-letter language code, the code will be displayed every time you
change the Subtitle Language setting. If you choose
any other languages, “---” will be displayed instead
(refer to page 34).
• If the disc has no subtitle language, NOT AVAILABLE
will be displayed.
• For discs with DivX® files, the screen only displays the
number of subtitle languages.
Sound Mode
DVD-A
This function allows you to select a desired sound mode during DVD-Audio playback.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
desired sound.
NOTE:
• When selecting a multichannel sound, it may
not be mixed down in
some cases even
though the HDMI
AUDIO or ANALOG
AUDIO setting is 2
CHANNEL.
1.LPCM 3/2.1ch 96k/2
2.PPCM 2/0ch 96k/2
Stereo Sound Mode
Camera Angle
DVD-V
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
) icon appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
VCD
CD
1 Press the AUDIO button repeatedly during play-
back to select your desired sound mode.
STEREO - both right and left channels are active (stereo)
L-ch
- only left channel is active
R-ch
- only right channel is active
STEREO
Both right and left channels
are active (stereo).
desired angle.
1/8
L-ch
Only the left channel
is active.
Angle 1
2/8
R-ch
Angle 2
Only the right channel
is active.
NOTE:
• Stereo sound mode will not be changed when playing
DTS CD.
8/8
Angle 8
Super
Audio CD
NOTE:
1 Press the SUPER AUDIO CD SET UP button
• If ANGLE ICON is set to OFF in the display menu, the
(
) icon will not appear (refer to page 33).
Virtual Surround
DVD-V DVD-A VCD
CD
MP3
WMA
You can enjoy stereophonic virtual space through your existing 2 channel stereo system.
1 During playback, press the MODE button repeat-
repeatedly to select among MULTI-CH AREA, CD
AREA, or 2CH AREA.
MULTI-CH AREA - playback in multi channel format.The
number of channels depends on the disc
being played.
CD AREA
- playback in the same quality with sound
as normal CDs.
2CH AREA
- playback in higher quality than that of
normal CD sound.
edly until the Virtual
OFF
Surround setting appears.
2 Press the ENTER button to
set it 1(Natural effect), 2(Emphasised effect) or OFF.
3 Press the RETURN button to exit.
NOTES:
• Select Virtual Surround OFF or lower the volume if the
sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than STEREO (for Audio CD
or Video CD playback only).
• This function cannot be used during Dialog Speed
(refer to page 20).
• Set HDMI AUDIO and ANALOG AUDIO to “2 CHANNEL” to use this function (refer to page 31)
• The Virtual Surround setting is not available for Super
Audio CDs. (If a disc contains the CD area, Virtual
Surround setting is available only for the CD area.)
MULTI-CH AREA
SACD
CD AREA
2CH AREA
SACD
front panel display
NOTES:
– 28 –
• The Virtual Surround setting is not available for Super
Audio CDs. (If a disc contains the CD area, Virtual
Surround setting is available only for the CD area.)
• Some playback options may not be available. These will
be skipped.
• MULTI-CH AREA is selected as default.
EN
In setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode are available (refer to pages 29-34).
QUICK mode consists of items of which the setting menus are frequently used, and they are accompanied
with QUICK mark. You can make all settings in CUSTOM mode.
TV ASPECT (Default: 4:3 LETTER BOX) QUICK
Language Setting
• Press the Cursor buttons
(K or L) to select a setting, then
press the ENTER button.
• Select 4:3 LETTER BOX. Black
bars may appear at the top and
bottom of the screen, depending
on the proportion of the TV
screen.
• Select 4:3 PAN & SCAN for a full height picture with both
sides adjusted.
• Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
• Select 4:3 SQUEEZE when the TV screen is too large horizontally at 16:9 WIDE setting and when it is impossible to
adjust the screen size using the TV’s controls.
Language setting can be varied with some DVDs or DivX®
Subtitles recorded in discs.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
4:3 SQUEEZE
(s or B) to select CUSTOM, then press the
ENTER button.
• The CUSTOM mode will appear.
3 Press the Cursor buttons
(s or B) to select LANGUAGE, then press the
ENTER button to confirm.
4 Press the Cursor buttons
(K or L) to select an item, then
press the ENTER button.
LANGUAGE
DIALOG
SUBTITLE
DISC MENU
OSD
DivX SUBTITLE
ORIGINAL
OFF
ENGLISH
ENGLISH
OFF
STILL MODE (Default: AUTO)
• Press the Cursor buttons
(K or L) to select a setting
(AUTO, FIELD, or FRAME),
then press the ENTER button.
• This function allows you to
adjust picture resolution and
quality in still mode.
• An individual picture on TV screen is called as “frame”,
which consists of two separate images called as “field”.
Some pictures may be blurred at the AUTO setting in
still mode due to their data characteristics.
• AUTO: Automatically selects the best resolution setting
(FRAME or FIELD) based on the data characteristics of
the pictures.
• FIELD: Select FIELD when the pictures are still unstable even if AUTO is selected. FIELD stabilises the pictures, although the picture quality may become coarse
due to the limited amount of data.
• FRAME: Select FRAME to display relatively motionless
pictures in higher resolution. FRAME improves the picture quality, although it may unstabilise the pictures due
to simultaneous output of two field data.
DIALOG (Default: ORIGINAL)
DISPLAY
STILL MODE
• Sets the audio language.
AUTO
FIELD
FRAME
SUBTITLE (Default: OFF)
• Sets the subtitle language.
DISC MENU (Default: ENGLISH)
• Sets the language for DVD Menu.
OSD (Default: ENGLISH) QUICK
• Sets the language for the on-screen display.
DivX SUBTITLE (Default: OFF)
• Sets the DivX® subtitle language.
5 Press the Cursor buttons (K or L) to select a lan-
guage, then press the ENTER button.
• If OTHER is selected for DIALOG, SUBTITLE or DISC
MENU, press four-digit number to enter the code for
your desired language (refer to the language code list
on page 34).
• Only the languages supported by the disc can be selected.
• For DivX SUBTITLE, if you want to display the Russian
subtitle, you can select either “RUSSIAN1” or “RUSSIAN2” which depends on type of the subtitle files.
VIDEO OUT (Default: SCART)
6 Press the SETUP button to exit.
DISPLAY
VIDEO OUT
NOTE:
• Language setting for DIALOG and SUBTITLE may not
be available on some discs. Then use the AUDIO and
SUBTITLE buttons. Details are on page 27.
Display Setting
You can change certain aspects of the DVD display screens,
still mode setting, Progressive and HDMI settings.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select CUS-
TOM, then press the ENTER button.
• The CUSTOM mode will appear.
3 Press the Cursor buttons
(s or B) to select DISPLAY,
then press the ENTER button
to confirm.
4 Press the Cursor buttons
(K or L) to select an item,
then press the ENTER button.
• Press the Cursor buttons
(K or L) to select a setting
(SCART, COMPONENT
INTERLACE or COMPONENT
PROGRESSIVE), then press
the ENTER button.
• This setting will be effective
when you exit the setup screen by pressing the SETUP
button.
• When VIDEO OUT is COMPONENT PROGRESSIVE,
P.SCAN appears on the DVD player’s front panel display after you exited the setup screen.
• In the HDMI output mode, even when VIDEO OUT is
set to COMPONENT PROGRESSIVE, signals are output always as Interlace.
• Refer to page 12 for more details.
SCART
COMPONENT INTERLACE
COMPONENT PROGRESSIVE
DISPLAY
TV ASPECT
STILL MODE
VIDEO OUT
PROG.MODE
HDMI SELECT
HDMI PICTURE
4:3 LETTER BOX
AUTO
SCART
AUTO1
YCbCr
NORMAL
– 29 –
EN
English
DVD SETUP
DVD SETUP
PROG.MODE (Default: AUTO1)
• Press the Cursor buttons
(K or L) to select a mode for
the progressive scan output,
then press the ENTER button.
• AUTO1: mode suitable for
images on the film
material.
• AUTO2: mode for images on the material of 30-frame
film.
• VIDEO1: mode for normal video material.
• VIDEO2: mode for video material with less movements.
• VIDEO3: mode for video material with many movements.
DRC (Dynamic Range Control)
(Default: ON)
• DRC function compresses the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
DISPLAY
PROG.MODE
AUTO1
AUTO2
VIDEO1
VIDEO2
VIDEO3
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
• The sound will be down sampled at 48kHz (44.1kHz),
even if you set to OFF.
DOLBY DIGITAL (Default: BITSTREAM) QUICK
• Select an HDMI picture mode
between NORMAL and
ENHANCED.
• Select ENHANCED if the blackwhite contrast is not clear.
• This setting is effective only for
HDMI RGB output.
• Set to BITSTREAM when the
player is connected to a Dolby
Digital decoder.
• This function is effective only for
the COAXIAL, OPTICAL and
HDMI connections.
BITSTREAM: Output by Dolby
Digital.
• For HDMI connection, if the connected equipment is not compatible with the Dolby Digital
BITSTREAM, the signals are output as PCM
regardless of the setting.
PCM: Convert Dolby Digital to PCM.
AUDIO
DISPLAY
TV ASPECT
STILL MODE
VIDEO OUT
PROG.MODE
HDMI SELECT
HDMI PICTURE
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
4:3 LETTER BOX
AUTO
SCART
AUTO1
YCbCr
NORMAL
5 Press the SETUP button to exit and activate the new
settings.
NOTES:
• Be sure to press the SETUP button, or the setting will
not work.
• When changing the VIDEO OUT setting (SCART,
COMPONENT INTERLACE or COMPONENT PROGRESSIVE), connect to a Video jack or an S-Video
jack on the TV. If the setting is changed, for example, to
SCART while the Component Video jacks are used to
connect to the TV, a distorted video signal may be output.
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
DTS (Default: BITSTREAM) QUICK
• Set to BITSTREAM when the
unit is connected to a DTS
decoder.
BITSTREAM: Output by DTS
sound.
• For HDMI connection, if
the connected equipment
is not compatible with the DTS Bitstream, the
signals are output as PCM regardless of the
setting.
PCM: Convert DTS to PCM.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
Audio Setting
You can change some Audio settings. It only affects during
the playback of DVD discs.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select CUS-
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
MPEG (Default: PCM) QUICK
TOM, then press the ENTER button.
• The CUSTOM mode will appear.
3 Press the Cursor buttons (s or B) to select
AUDIO, then press the ENTER button to confirm.
• Set to BITSTREAM when the unit
is connected to an MPEG
decoder.
BITSTREAM: Output MPEG sound.
• For HDMI connection, if
the connected equipment
is not compatible with the
MPEG sound, the signals are output as PCM
regardless of the setting.
PCM: Convert MPEG sound to PCM.
AUDIO
4 Press the Cursor buttons (K or L) to select an
item, then press the ENTER button.
• This menu display contains 2 pages. Press the Cursor
button (L) repeatedly to show the next page.
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
When playing disc with copyright protection
4:3 LETTER BOX
AUTO
SCART
AUTO1
YCbCr
NORMAL
HDMI PICTURE (Default: NORMAL)
AUDIO
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
• Set to ON when outputting in
48kHz (or 44.1kHz).
• This function is available only on
digital outputting of a disc recorded in 96kHz (or 88.2kHz).
• Sounds of the DVD-Audio which
exceed 96kHz (or 88.2kHz) will be output as 96kHz (or
88.2kHz) even if LPCM SELECT is set to OFF.
• This function is not effective for the HDMI sound output.
DISPLAY
TV ASPECT
STILL MODE
VIDEO OUT
PROG.MODE
HDMI SELECT
HDMI PICTURE
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
LPCM SELECT (Default: OFF)
HDMI SELECT (Default: YCbCr)
• Select an HDMI output mode
between YCbCr and RGB.
• When the connected equipment
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
AUDIO
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
HDMI AUDIO
ANALOG AUDIO
2 CHANNEL
2 CHANNEL
– 30 –
EN
DVD SETUP
BASS ENHANCER (Default: OFF)
When MULTI CHANNEL is selected for ANALOG AUDIO,
some speaker settings will be required.
• Set AUDIO MODE to ANALOG beforehand to perform this
setting.
1 Press the Cursor buttons
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
AUDIO MODE (Default: HDMI)
• Select the sound is output from
whether HDMI OUT jack or 5.1ch
AUDIO OUT jacks.
HDMI: Sound is output via HDMI
connection. Output from
5.1ch AUDIO OUT connection may be restricted.
ANALOG: Sound is output via 5.1ch AUDIO OUT jacks.
Output from HDMI connection is cut off.
• Set to ANALOG when Super Audio CD is played back.
(K or L) to select MULTI
CHANNEL, then press the
ENTER button.
2 Press the Cursor buttons
(K or L) to select the below
items, then press the ENTER
button.
ON
OFF
BITSTREAM
BITSTREAM
PCM
OFF
HDMI
Speaker Configuration
• Press the Cursor buttons
(K or L) to select the speaker to
set, then press the ENTER button.
• Press the Cursor buttons
(K or L) to select the speaker
size, then press the ENTER button.
AUDIO
HDMI AUDIO
ANALOG AUDIO
AUDIO
Speaker Configuration
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
FL
C
FR
SW
SL
HDMI AUDIO (Default: 2 CHANNEL)
• Select the number of channels
for HDMI audio output between 2
CHANNEL and MULTI CHANNEL.
• Refer to the table on page 16 for
the actual output settings.
• Connect appropriate external
equipment for each setting and set AUDIO MODE to
HDMI beforehand to perform this setting.
2 CHANNEL:
2 channel signals are output from HDMI OUT jack.
Suitable for monitors or projectors compatible with
HDMI 2CH.
MULTI CHANNEL:
Multi channel signals are output from HDMI OUT
jack. Suitable for monitors or amplifiers compatible
with HDMI multi channels.
• When MULTI CHANNEL is selected, the Speaker setting menu for HDMI AUDIO will appear (refer to page
32).
Speaker Configuration
DELAY TIME
CHANNEL LEVEL
• The CUSTOM mode will appear.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER
AUDIO MODE
AUDIO
MULTI CHANNEL
SR
AUDIO
FRONT(L/R)
LARGE
SMALL
FL
C
FR
SW
2 CHANNEL
2 CHANNEL
SL
SR
FRONT(L/R), CENTER, SURROUND(L/R)
LARGE: Select this when the connected speaker is
capable of playing back sounds of 100Hz or
less.
SMALL: Select this when the connected speaker is not
capable of playing back sounds of 100Hz or
less.
NONE: Select this when it is not connected. (It cannot
be set NONE on the FRONT speaker.)
SUB WOOFER
YES: Select this when SUB WOOFER is connected.
NONE: Select this when it is not connected.
NOTES:
• NONE is not available for SUB WOOFER when SMALL
is selected for FRONT (L/R).
• SMALL is not available for FRONT (L/R) when NONE
is selected for SUB WOOFER.
• ON is not available for BASS ENHANCER when NONE
is selected for SUB WOOFER.
• When playing back of DVD audio, the sound may not
come out as set due to restrictions in the disc or the
player.
ANALOG AUDIO (Default: 2 CHANNEL)
• Set AUDIO MODE to ANALOG beforehand to perform
this setting.
2 CHANNEL: Output 2ch sound from the 5.1ch AUDIO
OUT jacks.
MULTI CHANNEL: Output Multi channel sound from the
5.1ch AUDIO OUT jacks.
DELAY TIME
AUDIO
HDMI AUDIO
ANALOG AUDIO
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
(exclude Sub woofer). The delay time setting can be
used to make the sound from the different speakers
reach the listening position at the same time.
AUDIO
ANALOG AUDIO
2 CHANNEL
2 CHANNEL
2 CHANNEL
MULTI CHANNEL
5 Press the SETUP button to exit.
Use the Cursor buttons (K or L) to select the setting item,
then press the ENTER button.
• Press the Cursor buttons
(K or L) to select the speaker to
set, then press the ENTER button.
DISTANCE (Default: METERS)
METERS (when the ENTER button is pressed):
The unit of distance is set to meters (m).
FEET(when the ENTER button is pressed):
The unit of distance is set to feet (ft).
AUDIO
DELAY TIME
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
– 31 –
METERS
3.6m
3.6m
3.6m
ON
EN
English
Speaker Setting for ANALOG AUDIO
• Set to ON for sound output on
the bass-woofer channel when 2channel audio source is played
back.
• This function is effective only for
the 5.1ch AUDIO OUT jacks. Set
the AUDIO MODE to ANALOG
and ANALOG AUDIO to MULTI CHANNEL to set this
function.
• When SUB WOOFER is set to NONE in the Speaker
Configuration, BASS ENHANCER will be set to OFF
automatically.
DVD SETUP
FRONT(L/R), CENTER, SURROUND(L/R)
(Default: 3.6m)
FRONT(L/R):
The distance can be set within
the range of 0 to 18.0m.
CENTER, SURROUND:
These depend on the setting
value of FRONT(L/R).
Speaker Setting for HDMI AUDIO
When HDMI AUDIO is selected for
MULTI CHANNEL, the bass management setting menu will appear. Set the
Speaker Configuration, DELAY TIME
and CHANNEL LEVEL for each speakers (front, centre, surround and sub
woofer).
AUDIO
DELAY TIME
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
METERS
3.6m
3.6m
3.6m
ON
AUDIO
MULTI CHANNEL
Speaker Configuration
DELAY TIME
CHANNEL LEVEL
NOTES:
• It is not possible to adjust this
item if CENTER and SURK
ROUND have been set to NONE
in the Speaker Configuration setting.
L
• When DEFAULT is selected and
the ENTER button is pressed, all the items are restored
to their factory default settings.
AUDIO
FRONT(L/R)
5.4m
5.1m
4.8m
4.5m
4.2m
3.9m
3.6m
CHANNEL LEVEL
When the channel level differs from
each speaker, the adjustment can
be made in the unit of dB (-12dB to
0dB).
TEST TONE:
• Press the Cursor buttons (K or
L) to select TEST TONE, then
press the ENTER button.
The test tone will output from
each speaker in turn.
AUDIO
CHANNEL LEVEL
TEST TONE
FRONT(L)
CENTER
FRONT(R)
SUB WOOFER
SURROUND(R)
SURROUND(L)
0dB
0dB
0dB
0dB
0dB
0dB
Speaker Configuration
Set the size of each speaker between
LARGE and SMALL.
• The presence of the speakers is
detected automatically. Set the
detected speakers’ size.
• When a speaker is not detected,
its size is set as NONE.
• Once a speaker is detected, you
cannot set it to NONE.
• During HDMI audio output, the
sound output via analogue channels may be restricted.
AUDIO
Speaker Configuration
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
FL
C
FR
SW
SL
SR
AUDIO
CENTER
LARGE
SMALL
NONE
FL
C
FR
SW
SL
SR
DELAY TIME
Same as DELAY TIME setting for “Speaker Setting for
ANALOG AUDIO” on page 31.
CHANNEL LEVEL
AUDIO
TEST TONE
FRONT(L)
CENTER
FRONT(R)
SURROUND(R)
SURROUND(L)
Same as CHANNEL LEVEL setting for “Speaker
Setting for ANALOG AUDIO” on this page.
0dB
0dB
-1dB
-2dB
-5dB
Ratings Control
CHANNEL LEVEL:
• Press the Cursor buttons (K or
L) to select the speaker to set,
then press the ENTER button.
• Press the Cursor buttons (K or
L) to select the desired level for
each speaker, then press the
ENTER button.
Ratings Control allows you to set a limit, which prevents your
children from viewing inappropriate materials on DVDs. A fourdigit password that you establish will give you the control.
AUDIO
FRONT(L)
0dB
-1dB
-2dB
-3dB
-4dB
-5dB
-6dB
RATING LEVEL
L
NOTES:
• While the test tone is being output, the channel balance adjustment cannot be made.
• When TEST TONE is selected, no test tone will be output from SUBWOOFER.
• It is not possible to adjust this item for the speaker that
has been set to NONE in Speaker Configuration
setting.
3 Press the SETUP button to exit.
You can set a viewing limit through Rating Level. Playback of
the discs will stop if the disc’s general rating exceeds the limit
you set.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select CUS-
TOM, then press the ENTER button.
3 Press the Cursor buttons
(s or B) to select RATINGS,
then press the ENTER button.
4 Press the Numeric buttons to
enter your four-digit password.
RATINGS
PASSWORD
Please enter a 4-digit password.
• When doing this for the first time,
enter any four-digit number by
pressing the Numeric buttons (except for 4737), then
press the ENTER button. That number will be used as
the password from the second time onward. Record
your password in case you forget it.
5 Press the Cursor buttons
(K or L) to select RATING LEVEL, then press the ENTER button.
– 32 –
RATINGS
RATING LEVEL
ALL
PASSWORD CHANGE
EN
DVD SETUP
(K or L) to select a desired level, then press the ENTER button.
7 Press the SETUP button to exit.
• Press the ENTER button repeatedly to turn AUTO POWER OFF
ON or OFF.
• It will turn off the DVD player automatically after 30 minutes of no
use.
RATINGS
RATING LEVEL
ALL
8
7
6
5
4
3
L
NOTE:
• This function may not work on some DVDs. Be sure if
the RATINGS operates in the way you have set.
English
AUTO POWER OFF (Default: ON)
6 Press the Cursor buttons
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
ON
ON
BRIGHT
5sec
AUDIO
PANEL DISPLAY (Default: BRIGHT)
• Press the Cursor buttons
(K or L) to select a setting
(BRIGHT, DIMMER and AUTO),
then press the ENTER button.
• When AUTO is selected, the display dims only during playback.
To Change the Password:
1) Follow the steps 1 to 4 above.
2) Press the Cursor buttons (K or L) to select PASSWORD
CHANGE, then press the ENTER button.
3) Enter a new four-digit password, then press the ENTER
button.
4) Press the SETUP button to exit.
OTHERS
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
SLIDE SHOW (Default: 5sec)
• This adjusts the playback speed of
the JPEG SLIDE SHOW.
• Press the Cursor buttons
(K or L) to select between 5 sec
and 10 sec, then press the
ENTER button.
IF YOU FORGET THE PASSWORD
1 Press 4, 7, 3, 7 at step 4 .
• Password will be cleared and rating level will be set to
ALL.
2 Repeat steps 4 to 7 to re-establish the parental
OTHERS
SLIDE SHOW
5sec
10sec
lock.
DivX(R) VOD
CONTROL LEVELS
• ALL
Parental lock is cancelled.
• Level 8
DVD software of any grade (adult/general/children) can
be played back.
• Levels 7 to 2
Only DVD software intended for general use and children can be played back.
• Level 1
Only DVD software intended for children can be played
back, with those intended for adult and general use
prohibited.
• This player allows you to use the
DivX® Video-On-Demand (VOD)
services. You can play back the
files purchased or rental from
the VOD services. You need to
have a registration code to purchase or rental VOD files.
Please visit www.divx.com/vod
for more details.
• Press the ENTER button repeatedly to select AUDIO or VIDEO.
• AUDIO: Select to play back general contents of DVDAudio.
• VIDEO: Select to play back
DVD-Video contents
included in DVD-Audio.
OTHERS
ON
ON
BRIGHT
5sec
AUDIO
ANGLE ICON (Default: ON)
• Press the ENTER button repeatedly to turn ANGLE ICON ON or
OFF.
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
ON
ON
BRIGHT
5sec
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
ON
ON
BRIGHT
5sec
AUDIO
• You cannot play back the DivX® VOD files obtained with
different registration codes on this player.
• You cannot play back the DivX® VOD files, of which
rental period has been expired. In such case, press the
MENU button and select other files that can be played
back.
• Some DivX® VOD files are restricted with the limited
playable times (you cannot play them back beyond the
limit). If your DivX® VOD file has such limit, the playback
confirmation screen will appear. Use the Cursor buttons (s or B) to select YES if you want to play back
the file, or to select NO if you do not wish to play it
back. Then, press the ENTER button to confirm the
selection.
• Please send your inquiries regarding the VOD files to
DivX®, Inc.
• The CUSTOM mode will appear.
3 Press the Cursor buttons
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
OTHERS
NOTES:
then press the ENTER button.
(s or B) to select Other, then
press the ENTER button to
confirm.
4 Press the Cursor buttons
(K or L) to select an item,
then press the ENTER button.
Your registration code is:
12345678
To learn more visit
www.divx.com/vod
PLAYER MODE (Default: AUDIO)
Others Setting
This function allows you to adjust Angle Icon availability, Auto
Power off, brightness of the player’s display panel, slide show
mode, DVD-Audio player mode, and to obtain DivX® registration code.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select CUSTOM,
OTHERS
DivX(R) VOD
5 Press the SETUP button to exit.
AUDIO
– 33 –
EN
DVD SETUP
Reset to the Default Settings (except for RATINGS and VIDEO OUT)
This allows you to return all selections of SETUP (except for RATINGS and VIDEO OUT) to their default settings.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select INITIALIZE, then press the ENTER button.
3 Press the Cursor buttons (K or L) to select YES, then press the ENTER button.
4 Press the SETUP button to exit.
NOTE:
• If you like to cancel initialising, select NO at step 3 .
Language Code List
Code
Language
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Code
Language
Code
Language
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6565
6557
6558
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a three-letter language code (written in bracket), the code will be displayed every time you change the Audio or Subtitle language setting on pages 27 and 28. If you choose any other languages, ‘---’ will be displayed instead.
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
Cleaning the disc lens
• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROUBLESHOOTING GUIDE” in these Operating Instructions, the laser optical pickup unit may be dirty. Consult your dealer
or an Authorised Service Centre for inspection and cleaning of the laser optical pickup unit.
Disc Handling
•
•
•
•
Use discs which have the following logos on them.
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played on this product. Do not attempt to play such discs, as they may damage the player.
DIGITAL VIDEO
– 34 –
EN
If the DVD player does not perform properly when operated as instructed in these Operating Instructions, check the player,
consulting the following checklist.
Problem
Solution
No power
–Check if the AC power cord is properly connected.
–Unplug the AC code once, and wait for 5-10 seconds and then plug
it in again.
No sound or picture
–Check if the TV is turned on.
–Check the video and HDMI connection.
–Check the AUDIO/VIDEO cable connections to the TV.
(See CONNECTIONS.)
–Check if the PURE DIRECT is set to ON. If it is the case, set it to
OFF.
–Check if the VIDEO OUT mode is set correctly.
Distorted picture
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the DVD player directly to the TV.
–Check if the VIDEO OUT mode is set correctly.
Page
–
–
–
15, 16
12-16
17
12, 29
–
15
12, 29
Completely distorted picture or
black/white picture with DVD
–Connect the DVD player directly to the TV.
–Make sure the disc is compatible with the DVD player.
No sound or distorted sound
–Adjust the volume.
–Check that the speakers are connected correctly.
–The HDMI sound is not output during PURE DIRECT or when
AUDIO MODE is set to ANALOG.
–
13-15
17, 31
No audio at digital output
–Check the digital connections.
–Check the audio settings.
–Digital signals cannot be output with Super Audio CDs. Use
analogue connections.
–Area/layer of Super audio CD being played (MULTI/STEREO/CD)
does not match amplifier connections.
13, 16
30-32
13-15
–Check the HDMI connection. (Check the status of the HDMI related
indications.)
–Check whether the connected monitor equipment or other equipment
supports HDCP. (This player will not output a video signal unless the
other equipment supports HDCP.)
–Connect the DVD player to the display equipment using the Audio/
Video cables (supplied), and check the HDMI settings.
–Check whether the output format of this player (HDMI FORMAT)
matches the supported input format of other connected equipment.
–Check if the PURE DIRECT is set to ON. If it is the case, set it to
OFF.
16, 27
Picture freezes momentarily
during playback
–Check the disc for fingerprints/scratches and clean with a soft cloth
wiping from centre to edge.
–Clean the disc.
34
Disc can’t be played back
–Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the ratings control or change the control level.
–Insert a correct disc that can be played back on this player.
No return to start-up screen when
disc is removed
–Reset the player by turning it off, then on again.
–
The DVD player does not respond to
the remote control
–Aim the remote control directly at the sensor on the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
8
–
8
8
No image from HDMI connection
– 35 –
15
6
–
16
13-16,
30-32
16
17
34
34
17
–
32-33
6
EN
English
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
Problem
Solution
Page
Buttons do not work or the player
stops responding
–To completely reset the player, unplug the AC cord from the AC
outlet for 5-10 seconds.
–
The DVD player does not respond
to some operating commands
during playback
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
6
The DVD player cannot read
CDs/DVDs
–Use a commonly available CD/DVD cleaner to clean the lens
before sending the DVD player for repair.
34
Angle does not switch
–The angle cannot be switched for DVDs which do not contain
multiple angles. In some cases multiple angles are only recorded
for specific scenes.
28
Playback does not start when the title
is selected
–Check the “RATINGS” setting.
32-33
The password for rating level has
been forgotten
–Enter the default password “4737”, then your forgotten
password will be cleared.
32-33
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in these Operating
Instructions for details on correct operations.
• Playback from a desired track and random playback are not available during programme playback.
• Some functions are prohibited on some discs.
• When playing back Video CDs with PBC function, some operations (e.g., select and track repeat) cannot be performed.
Cancel PBC function temporarily to perform those operations. See page 17.
– 36 –
EN
SPECIFICATIONS
PIN CONNECTION (AV1)
SIGNAL SYSTEM
PAL colour
APPLICABLE DISCS
(1) DVD-Video/DVD-Audio Discs
1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided
discs, 2-layer 12 cm double-sided discs (1 layer per side)
1-layer 8 cm single-sided discs, 2-layer 8 cm singlesided discs, 2-layer 8 cm double-sided discs (1 layer per
side)
(2) Super Audio CD
(3) DVD-R/DVD-RW
(4) Compact discs (Audio CD, Video CD)
12 cm discs, 8 cm discs
(5) CD-R/CD-RW
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.3Vp-p
Output connectors: S connectors, 1 set
VIDEO OUTPUT
Output level: 1Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
English
20 18 16 14 12 10 8 6 4 2
21 19 17 15 13 11 9 7 5 3 1
Contacts, signal levels and impedances
Contact 1
Audio Output (Right):
Contact 3
Audio Output (Left):
Contact 4
Audio, Ground
Contact 5
RGB, Ground (Blue)
Contact 7
RGB Output (Blue):
Contact 8
Function Select Switching Control
2.0Vrms/1kΩ
2.0Vrms/1kΩ
0.7Vp-p/75Ω
L : 0.0~2.0V DC
Power Off
M: 4.5~7.0V DC
Wide-Screen Mode
(16:9)
H: 9.5~12.0V DC
Normal Mode (4:3)
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
PB/CB output level: 0.7Vp-p (75Ω/ohms)
PR/CR output level: 0.7Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
HDMI OUTPUT
HDMI jack, 1 set
AUDIO/VIDEO
21-pin scart jack, 1 set
AUDIO OUTPUT
Output level: 2Vrms
2 channel (L, R) output connector: Pin jack, 1 set
Multi channel (FL, FR, C, SL, SR, SW)
output connector: Pin jack, 1 set.
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1 DVDs (linear PCM) : 4Hz to 22kHz (48kHz sampling)
: 4Hz to 44kHz (96kHz sampling)
: 4Hz to 88kHz (192kHz sampling)
2 CDs
: 4Hz to 20kHz
3 Super Audio CD
: 4Hz to 100kHz
(2) S/N ratio
: 115dB
(3) Total harmonic distortion : 1kHz CD: 0.004%
(4) Dynamic range
: DVD: 100dB
CD: 98dB
Contact 9
RGB, Ground (Green)
Contact 11
RGB Output (Green):
Contact 13
RGB, Ground (Red)
Contact 14
RGB Switching Control, Ground
Contact 15
RGB Output (Red):
Contact 16
RGB Switching Control
H: 1~3V DC
Contact 17
Video Output Signal, Ground
Contact 18
Video Input Signal, Ground
Contact 19
Video Output (CVBS):
Contact 21
Common Ground (shielding)
0.7Vp-p/75Ω
0.7Vp-p/75Ω
RGB Mode
1.0Vp-p/75Ω
DIGITAL AUDIO OUTPUT
Optical digital output: Optical connector, 1 set
Coaxial digital output: Pin jack, 1 set
POWER SUPPLY
AC 200-240V, 50Hz
POWER CONSUMPTION
17W (Standby: 1.35W)
MAXIMUM EXTERNAL DIMENSIONS
435 (width) x 75 (height) x 310 (depth) mm
(including protruding parts)
MASS
2.6 Kg (5.72 lbs)
REMOTE CONTROL UNIT
RC-1017
Infrared pulse type
Supply: DC 3V, 2 R6P/AA batteries
– 37 –
EN
TOKYO, JAPAN
www.denon.com
Printed in China
00D 511 4568 006
Denon Brand Company, D&M Holdings Inc.
1VMN23183
E6BE0ED/E6BE1ED *****