Operating instructions | Denon DVD-2930CI DVD Player User Manual

DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
DVD-2930CI
OPERATING INSTRUCTIONS
ENGLISH
SAFETY INSTRUCTIONS
¢ SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock t persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
LABELS (for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY
ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
1.
Read Instructions – All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions – The safety and operating instructions should be
retained for future reference.
3. Heed Warnings – All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should be followed.
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners.
6. Attachments – Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture – Do not use this product near water – for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement;
or near a swimming pool; and the like.
8. Accessories – Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
9. A product and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
10. Ventilation – Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
11. Power Sources – This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
12. Grounding or Polarization – This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
I
13. Power-Cord Protection – Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
15. Outdoor Antenna Grounding – If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding
electrode. See Figure A.
16. Lightning – For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
17. Power Lines – An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry – Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
20. Servicing – Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
21. Damage Requiring Service – Unplug this product from the wall outlet and
refer servicing to qualified service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance – this
indicates a need for service.
22. Replacement Parts – When replacement parts are required, be sure the
service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
23. Safety Check – Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
24. Wall or Ceiling Mounting – The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
25. Heat – The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
ENGLISH
FCC INFORMATION (For US customers)
¢ NOTE ON USE
1. PRODUCT
This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this
manual, meets FCC requirements. Modification not expressly approved by
DENON may void your authority, granted by the FCC, to use the product.
• Keep the apparatus free from moisture, water, and
dust.
• Do not let foreign objects into the apparatus.
3. NOTE
This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or
an experienced radio/TV technician for help.
• Avoid high temperatures.
Allow for sufficient heat dispersion when installed
in a rack.
• Unplug the power cord when not using the • Do not let insecticides, benzene, and thinner come
apparatus for long periods of time.
in contact with the apparatus.
This Class B apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
¢ Copyrights
• It is prohibited by law to reproduce, broadcast, rent or play discs in public
without the consent of the copyright holder.
• La reproduction, la diffusion, la location, le prêt ou la lecture publique de ces
disques sont interdits sans le consentement du détenteur des droits d’auteur.
• De acuerdo con las leyes está prohibido reproducir, emitir, alquilar o interpretar
discos en público sin la autorización del propietario de los derechos de autor.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
* (For apparatuses with ventilation holes)
• Do not obstruct the ventilation holes.
II
• Never disassemble or modify the apparatus in any
way.
ENGLISH
Getting Started
Getting Started
Thank you for purchasing this DENON DVD Audio-Video / Super Audio CD player. Please read the operation instructions thoroughly in order to
acquaint yourself with the DVD Audio-Video / Super Audio CD player and achieve maximum satisfaction from it.
Be sure to keep these instructions for future reference, should any questions or problems arise.
Contents
Getting Started
Accessories······················································································3
Before using ····················································································3
About discs
Discs usable on this set ·····························································3, 4
Holding discs··················································································4
Loading discs ·················································································4
Cautions on loading discs ······························································4
Cautions on handling······································································4
Cautions on storing discs·······························································4
Cleaning discs ················································································4
About the remote control unit
Inserting the batteries ····································································5
Operating range of the remote control unit ···································5
Part names and functions
Front panel ·····················································································6
Display····························································································6
Rear panel ······················································································7
Remote control unit ·······································································7
Connections
Cable indications ············································································8
Connection to a TV·········································································9
Digital connection to an AV amplifier
with built-in decoder································································9, 10
Connection to a device with 2-channels of
analog audio inputs······································································10
Surround connections to a device with 5.1-channels of
analog audio inputs······································································10
DENON LINK connections····························································11
Connection to a device with an HDMI terminal ··················11, 12
Digital connection to a recording device (MD recorder, etc.) ···12
Connecting the power supply cord ············································12
Other settings
Using the pure direct mode·························································28
Making the settings for the picture output
from the HDMI terminal
Changing the signal format ··························································29
Changing the resolution ·······························································29
Adjusting the picture quality
Storing the picture quality settings in the memory ·····················30
Gamma correction········································································31
Making the initial settings
Table of initial settings···························································13, 14
Operations for making the initial settings·································15
Language setting ··········································································16
Digital interface settings
HDMI RGB picture quality settings··············································17
HDMI audio ··················································································17
HDMI speaker settings··························································17~19
HDMI auto format ········································································19
DENON LINK················································································19
Video setting
TV aspect ratio ·············································································20
TV type ·························································································20
Component video output ·····························································20
AV Synchronized···········································································21
Offset time ···················································································21
Squeeze mode ·············································································21
Progressive mode ··································································21, 22
Horizontal display range ·······························································22
Audio settings
Audio channels·············································································22
Digital output ················································································23
Downsampling ·············································································23
Source direct ··········································································23, 24
Bass enhancer··············································································24
Dynamic range compression························································24
Viewing restriction setting
Viewing restriction level ·······························································25
Password······················································································25
Displaying the registration code···················································26
Special settings
Player mode ·················································································26
Captions ·······················································································26
Wallpaper ·····················································································26
Screensaver··················································································27
Display··························································································27
Auto power mode ········································································27
Slide switching time·····································································27
1
ENGLISH
Basic Operation
Turning the power on···································································32
Loading discs ················································································32
Playing discs··················································································32
To stop playback···········································································32
To pause playback ········································································33
About DVD-Video discs································································33
Playing DVD-Video discs ······························································33
Using the top menu and DVD menu············································34
Switching the audio language (Multiple-Audio Function) ·············34
Switching the subtitle language (Multiple-Subtitle Function)·······34
Switching the angle (Multiple-Angle Function) ····························34
About DVD-Audio discs ·······························································34
Switching between groups and tracks·········································35
Playing bonus groups ···································································35
Selecting still pictures ··································································35
About Super Audio CDs·······························································35
Setting the top priority playback layer for Super Audio CDs ·······36
About Video and Music CDs························································36
Playing discs with playback control··············································36
About discs containing MP3 and WMA format files···········36, 37
About discs containing DivX® format files ·······························38
About discs containing still picture files····································38
Playing a disc containing files in JPEG format ·····························38
Playing Picture CDs and Fujicolor CDs ········································39
Repeat and random play of MP3, WMA, JPEG and DivX® files ···40
ENGLISH
Getting Started
Convenient operations
Fast-forwarding/Fast-reversing ··················································40
Moving to the beginning ·····························································40
Searching using the NUMBER buttons········································40
Frame-by-frame playback
(for DVD-Video discs and Video CDs only) ································41
Slow playback···············································································41
Repeat playback ·····································································41, 42
Repeating a section between two specific points
(A-B repeat playback) ···································································42
Programmed playback ·································································42
Playing in random order ······························································42
Operating using the on-screen display ································43, 44
Marking scenes you want to see again later·····························44
Adding marks ···············································································44
Calling out marked scenes···························································44
Zoomed play ·················································································45
Setting the video format ·····························································45
Adjusting the brightness of the display·····································45
Others
About the DENON LINK function················································46
AL24 Processing Plus ···································································46
Copyright protection technology················································46
Resetting························································································46
Registered trademarks·································································46
Troubleshooting············································································47
Specifications ················································································48
2
ENGLISH
ENGLISH
Getting Started
Getting Started
Accessories
Check that the following parts are attached in addition to the main
unit:
q Operating instructions .............................................................1
w Service station list....................................................................1
e Power supply cord (Cord length: Approx. 59-1/16 ft 1.5 m)....1
r Remote control unit (RC-1037) ................................................1
t R6P/AA batteries .....................................................................2
y Audio/Video cable (Cable length: Approx. 59-1/16 ft 1.5 m)....1
u DENON LINK cable (Cable length: Approx. 59-1/16 ft 1.5 m) ...1
e
r
t
• Before turning the power operation switch on.
Check once again that all connections are correct and that there are
not problems with the connection cables. Always set the power
operation switch to the standby position before connecting and
disconnecting connection cables.
• Store these instructions in a safe place.
After reading, store this instructions along with the warranty card in
a safe place.
• Power is supplied to some of the circuitry even when the power
is set to the standby mode using the power operation switch.
When traveling or leaving home for long periods of time, be
sure to unplug the power supply cord from the power outlet.
• Note that the illustrations in these instructions may differ from
the actual unit for explanation purposes.
Playable discs
Mark (logo)
Signal content
Disc size
DVD-Audio
(*1)
12 cm
DVD-Video
(*1)
Digital audio
+
Digital video
(MPEG2 format)
DVD-R/DVD+R
(*2)
DVD+R
8 cm
DVD-RW
(*2) (*3)
DVD+RW (*2)
DVD+ReWritable
SUPER
AUDIO CD
About discs
y
u
The discs playable on the DVD-2930CI are the discs shown on the
table at the right.
Do not use discs with special shapes, as they could damage the
player.
Video CD
(*1)
V
CD
C
CD-R
(*4)
Before using
Digital audio
+
Digital video
(MPEG1 format)
12 cm
Digital audio
12 cm
8 cm
MP3
Recordable
CD-RW
(*4)
Pay attention to the following before using this unit:
• Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
12 cm
Stereo Multi-ch
Discs usable on this set
• Moving the unit.
To prevent short-circuits or damaged wires in the connection cables,
always unplug the power supply cord and disconnect the connection
cables between all other audio components when moving the unit.
Digital audio
Digital images
(JPEG format)
8 cm
ReWritable
NOTE:
• DVD players and DVDs have specific region
numbers (assigned by country).
The disc’s region number must be the same as
the player’s or the disc cannot be played.
The DVD-2930CI has region number 1.
• Condensation (dew).
Water droplets may condense on internal operation parts if the set
is brought into a heated room from the cold outdoors or when the
room is heated rapidly. If this happens, the set may not operate
properly.
• Should condensation occur.
The condensation will evaporate in one hour or less, at which time
the system will function normally.
3
ENGLISH
1
Picture CD
Digital images
(JPEG format)
12 cm
Fujicolor CD
Digital images
(JPEG format)
12 cm
WMA
Digital audio
12 cm
DivX®
Digital audio
+
Digital video
(MPEG4 format)
12 cm
ENGLISH
Getting Started
Getting Started
*1 : Some DVD-Audio discs, DVD-Video discs and video CDs may be
designed to by the software producer to operate in ways other
than described in this manual.
*2 : This player can play DVD±R/DVD±RW discs recorded in video
format on DVD recorders. Depending on the recording
conditions, however, the disc may not be recognized or it may not
play normally (the picture or sound may be broken, etc.). Discs
that have not been finalized cannot be played.
*3 : DVD-RW discs can be played if they have been recorded in the
VR (Video Recording) mode and finalized.
*4 : Depending on the recording conditions, CD-R/CD-RW discs may
not play normally.
The discs described below cannot be played:
• DVDs with region numbers other than “1” or “ALL”
• DVD-ROM/RAM (For DVD-ROM discs, data files in DivX® 3.11, 4.x,
5.x and 6 format can be played)
• CD-ROM (Data files in MP3, JPEG, WMA, and DivX® 3.11, 4.x, 5.x
and 6 can be played)
• VSD/CVD/SVCD
• CDV (Only the audio part can be played)
• CD-G (Only the audio signals can be output)
• Photo CDs, etc.
Loading discs
Cautions on handling
• Set the disc with the labeled side facing up.
• Make sure the disc tray is fully open when inserting the disc.
• Place the discs flatly, 12 cm discs in the outer tray guide (Figure 1),
8 cm discs in the inner tray guide (Figure 2).
Figure 1
Figure 2
Outer tray guide
Inner tray guide
Cautions on storing discs
12 cm discs
8 cm discs
• Place 8 cm discs in the inner tray guide without using an adapter.
• If a disc that cannot be played is loaded or the disc is loaded upsidedown, “0h00m00s” is displayed on the player’s display.
NOTE:
• Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
Holding discs
• Do not get fingerprints, oil or dirt on discs.
• Take special care not to scratch discs when removing them from
their cases.
• Do not bend or heat discs.
• Do not enlarge the hole at the center.
• Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs.
• Water droplets may form on discs if they are moved suddenly from
a cold place (outdoors for example) to a warm place, but do not try
to dry them off using a hairdryer, etc.
Do not touch the signal surface.
Cautions on loading discs
• Be sure to remove discs after using them.
• Be sure to store discs in their cases to protect them from dust,
scratches, warping, etc.
• Do not store discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heating appliances, etc.
Cleaning discs
• If there are fingerprints or dirt on discs, wipe them off before using
the disc. If not the sound quality could be reduced and the sound
may be broken.
• Use a commercially available disc cleaning set or a soft cloth to clean
discs.
• Only load one disc at a time. Loading two or more discs can damage
the set or scratch the discs.
• Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
• Do not use discs on which the sticky part of cellophane tape or
labels is exposed or on which there are traces of where labels have
been removed. Such discs could get caught inside the player and
damage it.
Gently wipe the disc from the
inside towards the outside.
Do not wipe with a circular motion.
NOTE:
• Do not use record spray, antistatic agents, or benzene, thinner or
other solvents.
4
ENGLISH
ENGLISH
Getting Started
Getting Started
About the remote control unit
Inserting the batteries
q Remove the cover.
w Set two R6P/AA batteries in the
battery compartment in the
indicated direction.
Operating range of the remote control unit
• Point the remote control unit at the remote sensor when operating
it.
• The remote control unit can be used from a distance of up to about
22 feet / 7 meters, at a horizontal angle of up to 30° with respect to
the sensor.
e Set the cover back in place.
Notes on batteries:
• Replace the batteries with new ones if the set does not operate
even when the remote control unit is operated nearby the unit.
(The attached batteries are only for verifying operation.)
• When inserting the batteries, be sure to do so in the proper
direction, following the “<” and “>” marks in the battery
compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries
in flames.
• If the battery fluid should leak, carefully wipe the fluid off the
inside of the battery compartment and insert new batteries.
• Remove the batteries from the remote if it will not be in use for
long periods.
30°
30°
Approx. 22 feet / 7 m
NOTE:
• It may be difficult to operate the remote control unit if the remote
sensor is exposed to direct sunlight or strong artificial light.
5
ENGLISH
ENGLISH
Getting Started
Getting Started
Part names and functions
Display
For buttons not explained here, see the page indicated in parentheses ( ).
!5 !4
!3
!2 !1 !0 o
i
u
SUPER DVD GROUP TITLE TRACK CHAP ANGLE D.MIX PROG RAND TOTAL SING
AUDIO VCD
1 A-B
PROGRESSIVE
REM HDCD
y
t
Front panel
!7
!6 !5
!4
!3
q
w
e
q 1 : Displayed during playback.
3 : Displayed when in the pause or frame-by-
frame play mode.
w Displayed when “COMPONENT VIDEO OUT”
is set to “PROGRESSIVE”.
qw e
rt
y
q Power operation switch
(ON/STANDBY) .........................................(32)
w Power indicator.........................................(32)
e Power switch (¢ON/£OFF).............(15, 32)
r DENON LINK indicator .............................(46)
t AL24 PLUS indicator.................................(46)
y Display
u Remote control sensor ...............................(5)
i STILL/PAUSE button ................................(33)
u
i o !0 !1 !2
e Various types of information on the disc, the
elapsed playing time, etc., are displayed here.
r Displayed when HDMI video or audio signals
o SUPER AUDIO CD SETUP button............(36)
!0 HDMI SELECT button ...............................(29)
!1 HDMI FORMAT button..............................(29)
!2 Slow/Search buttons (6, 7) ............(40)
!3 Skip buttons (8, 9) .........................(39)
!4 STOP button (2)........................................(32)
!5 PLAY button (1)........................................(32)
!6 OPEN/CLOSE button (5) .........................(32)
!7 Disc Tray.......................................................(4)
are being output.
Flashes when connection of the HDMI terminal
is being checked.
t These indicate the channels being played.
L
: Front left
C : Center
R : Front right
LFE : Subwoofer
SL : Surround left
S : Surround monaural
SR : Surround right
6
ENGLISH
DIGITAL
L.PCMP.PCM L
MPEG JPEG SL
WMA MP3 HDMI
C R LFE
S SR
r
y These indicate the format being played.
u Displayed when playing HDCD-compatible
discs.
i Indicates the time display mode.
o Displayed during random playback.
!0 Displayed during program playback.
!1 Displayed when the audio signals can be downmixed.
!2 Displayed when playing discs containing
multiple angles.
!3 These indicate the type of the different
sections of the currently playing disc.
!4 Displayed during repeat playback.
!5 These indicate the type of the currently playing
disc.
ENGLISH
Getting Started
Getting Started
Rear panel
!1
Remote control unit
!0
o
i
q
w
q
w
e r
q 5.1ch AUDIO OUT terminals ....................(10)
w 2ch AUDIO OUT terminals ...................(9, 10)
e VIDEO OUT terminal...................................(9)
r S-VIDEO OUT terminal ...............................(9)
t COMPONENT VIDEO OUT terminals ........(9)
y ROOM TO ROOM IN/OUT jacks
Control terminal for system extension.
t
y
!9
@2
e
u
u RS-232C input/output terminal
@3
@5
r
t
y
Control terminal for system extension.
i AC inlet ......................................................(12)
o HDMI OUT terminal ..................................(11)
!0 DENON LINK output terminal .................(11)
!1 DIGITAL OUT COAXIAL/
@7
u
i
o
OPTICAL terminals................................(9, 12)
!1
!3
!4
!5
!6
!7
!8
7
ENGLISH
@0
@1
@4
@6
@8
@9
!0
#0
!2
#1
#3
#2
#4
#5
q POWER ON/OFF buttons .........................(32)
w HDMI SELECT/FORMAT buttons.............(29)
e Number buttons (0 ~ 9, +10)..............(16, 34)
r This button does not function.
t ANGLE button ...........................................(34)
y TOP MENU button ....................................(34)
D H F G) ........................(15)
u Cursor buttons (D
i ENTER button............................................(15)
o MENU button ............................................(34)
!0 STOP button..............................................(32)
!1 STILL/PAUSE button ................................(33)
!2 SKIP buttons........................................(39, 40)
!3 REPEAT button ..........................................(37)
!4 A-B button .................................................(42)
!5 RANDOM button.......................................(37)
!6 MARKER button ........................................(44)
!7 SETUP button............................................(15)
!8 PICTURE ADJUST button.........................(30)
!9 OPEN/CLOSE button ................................(32)
@0 NTSC/PAL button .....................................(45)
@1 SUPER AUDIO CD SETUP button............(36)
@2 PROGRAM/DIRECT button ......................(42)
@3 CLEAR button............................................(35)
@4 CALL button ..............................................(42)
@5 SEARCH MODE button.............................(35)
@6 AUDIO button............................................(34)
@7 SUBTITLE button ......................................(34)
@8 DISPLAY button...................................(37, 43)
@9 RETURN button.........................................(19)
#0 PLAY button...............................................(32)
#1 SLOW/SEARCH buttons...........................(40)
#2 PAGE +/– buttons .....................................(35)
#3 ZOOM button ............................................(39)
#4 DIMMER button ........................................(45)
#5 PURE DIRECT MEMORY/SELECT buttons ...(28)
ENGLISH
Connections
Connections
Cable indications
Connect using the connection cables shown below.
Audio cable
A
Video cable
F
Analog audio connections
L
L
R
R
Video cable (75 Ω/ohms pin-plug cable)
Pin-plug cable
B
Video connections
G
S-Video connections
Analog audio connections
S-terminal cable
Pin-plug cable
C
H
Component video connections
Coaxial digital connections
Coaxial digital cable (75 Ω/ohms pin-plug)
D
Component video cable
Digital connections (Optical)
Audio and Video cable
Optical fiber cable
E
I
HDMI connections
DENON LINK connections
HDMI cable
DENON LINK cable (Included)
J
Signal direction
Audio signal
Video signal
OUT
IN
OUT
IN
Analog audio/video connections
L
L
R
R
Audio/video cable (Included)
8
ENGLISH
NOTE:
• Do not plug in the power supply cord until all connections have
been completed.
• When making connections, also refer to the operating
instructions of the other components.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Making connections with the power turned on could result in
noise or damage the speakers.
• Bunching the power supply cords and connection cables
together could result in humming or noise.
• Do not connect to the amplifier’s PHONO input terminal. Doing
so could result in damage.
• Install the player in a place where the surrounding temperature is
35°C or below.
ENGLISH
Connections
Connections
Connection to a TV
Digital connection to an AV amplifier with built-in decoder
When playing DVDs recorded in Dolby Digital or DTS, the Dolby Digital or DTS bitstream is output from
the DVD-2930CI’s digital audio output terminal.
By connecting the DVD-2930CI to an AV amplifier equipped with a built-in Dolby Digital or DTS decoder
you can achieve sound with a power and sense of presence like that of a movie theater or concert hall.
¢ For a TV equipped with a video input or S-Video input terminal
Monitor
G
S VIDEO
IN
AV amplifier
or
J
D
OPTICAL
IN
VIDEO
IN
C
AUDIO IN
L
L
L
R
R
R
or
COAXIAL
IN
NOTE:
• Playing a DVD recorded in DTS when connected to an AV amplifier (decoder) that is not DTS
compatible could result in noise that is unpleasant on the ears and could damage the speakers.
¢ For a TV equipped with component video input terminals
Monitor
H
COMPONENT VIDEO IN
Y
PB
PR
A
AUDIO IN
L
L
L
R
R
R
Match the shapes
• If the TV to which the player is to be connected is compatible with progressive scan video, connect to
the component video input terminals.
• The DVD-2930CI’s progressive output (525P) is compatible with Macrovision copy guard. With TVs that
are not compatible with the DVD-2930CI, the picture may be affected. In this case, set “COMPONENT
VIDEO OUT” at “VIDEO SETUP” to “INTERLACED”.
• For TVs not compatible with the progressive mode, set “COMPONENT VIDEO OUT” at “VIDEO
SETUP” to “INTERLACED”.
NOTE:
• Connect the DVD-2930CI’s video output either directly to the TV or indirectly via an AV amplifier. Do
not connect it via a VCR (video cassette recorder).
Some discs include copy prohibit signals. If such discs are played via a VCR, the copy guard system
may disturb the picture.
9
ENGLISH
• When using an optical fiber cable (commercially
available), insert its plug fully in the proper
direction.
ENGLISH
Connections
Connections
¢ Audio signals output from the DVD-2930CI’s digital audio output terminals
Connection to a device with 2-channels of analog audio inputs
Bitstream output
Disc type
With “DIGITAL OUTPUT” as initial setting
Audio recording format
Dolby Digital
Monitor
NORMAL
PCM
Dolby Digital bitstream
2-channel PCM
(48 kHz / 16 bit)
DVD-Video
DTS
DTS bitstream
J
AUDIO IN
L
L
L
R
R
R
PCM output
With “DOWN SAMPLING” as initial setting
OFF
Disc type
Audio recording format
With copyright
protection
DVD-Video
No output
No output
44.1/88.2/176.4 kHz /
16 ~ 24 bit
No output
*2 44.1/88.2 kHz / 16 ~ 24 bit *3
48/96/192 kHz /
16 ~ 24bit
No output
*1 48/96 kHz / 16 ~ 24bit
48 kHz / 16 bit PCM
Linear PCM
Linear PCM
DVD-Audio
Video CD
MPEG1
Music CD
44.1 kHz / 16 bit Linear PCM
MP3 CD
MP3 (MPEG-1 Audio Layer 3)
WMA CD
WMA (Windows Media Audio)
Super audio CD
DSD (Direct Stream Digital)
:
:
:
:
96 kHz / 16 ~ 24 bit PCM
44.1 kHz / 16 bit PCM
or
Packed PCM
*1
*2
*3
*4
48 kHz / 16 ~ 24 bit PCM
48 kHz / 16 ~ 24 bit
96 kHz / 16 ~ 24 bit
*1
NOTE:
• When connecting to a 2-channel audio stereo device, use the “2ch AUDIO OUT” terminals. If the
“5.1ch AUDIO OUT FL/FR” terminals are used, set “AUDIO SETUP” in “initial settings” to “2CH
(VSS OFF)”, “2CH (VSS1 ON)” or “2CH (VSS2 ON)” (
page 22). For software recorded in multichannel, analog signals that have been down-mixed into two channels are output. (For sources for
which down-mixing is prohibited, only the FL/FR signals are output.)
ON
Without copyright
protection
*3
48 kHz / 16 bit PCM
Surround connections to a device with 5.1-channels of analog audio inputs
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
32/44.1/48 kHz / 16 bit PCM
44.1/48 kHz / 16 bit PCM
No output *4
No output *4
The multi-channel audio signals of Super Audio CDs and multi-channel audio signals recorded in packed
PCM format can be played.
AV amplifier
B
Only 48 kHz/16 bit sources output
Only 44.1 kHz/16 bit sources output
176.4 kHz/192 kHz signals are converted to 88.2 kHz/96 kHz respectively.
When playing the CD layer, 44.1 kHz/16 bit linear PCM signal output
CENTER
A
L
L
R
R
SURROUND
L
R
B
• Bitstream:
These are signals that have been compressed
and converted to digital.
Depending on the decoder, they are decoded for
example into 5.1-channel multi-channel audio
signals.
• Linear PCM (LPCM):
These are audio signals that have been converted
to digital without being compressed (the signal
recording format used for music CDs).
While music CDs are recorded in 44.1 kHz/16 bit
format, DVDs are recorded in anything between
44.1 kHz/16 bit and 192 kHz/24 bit format, so
they generally offer higher sound quality than
music CDs.
SUBWOOFER
• Packed PCM (PPCM):
These are compressed PCM signals providing
high sound quality with virtually no data loss
when restored to the original signals.
• When a DVD source containing PCM signals
recorded in multi-channel is played, the signals
are down-mixed to the 2-channels for output (the
DVD-2930CI’s “D.MIX” indicator lights).
For sources for which down-mixing is prohibited,
only the FL and FR channels are output.
J
FRONT
L
L
L
R
R
R
• To achieve high quality analog sound, we recommend setting “DIGITAL OUTPUT” to “OFF” for the
“PURE DIRECT MODE” setting (
page 28). (This minimizes influence from the digital output
circuitry.)
10
ENGLISH
ENGLISH
Connections
Connections
¢ Audio setting of device to be connected with an HDMI terminal (
DENON LINK connections
When connected to a DENON LINK-compatible AV amplifier, the multi-channel signals of DVD-Audio
discs, Super Audio CDs, etc., can be transferred as such in digital format.
Device to be connected
HDMI audio setting
Device compatible with 2channel audio input or device
not compatible with audio
input
AV amplifier
page 17)
2CH
The multi-channel audio signals are output from the analog
audio output and DENON LINK terminal.
Down-mixed 2-channel audio signals are output from the HDMI
output terminal.
Device compatible with DTS or
Dolby Digital decoding
MULTI
(NORMAL)
The DTS or Dolby Digital signals can be decoded by the
connected TV or AV amplifier.
(The HDMI audio speaker setting, etc., cannot be made.)
Device compatible with 3 or
more channels of audio inputs
(not DTS or Dolby Digital
compatible)
MULTI
(LPCM)
Multi-channel audio signals are output from the HDMI terminal.
The HDMI audio speaker setting, etc., can be made.
E
DENON
LINK
• Digital transfer is possible up to 24 bit/2ch for 192/176.4 kHz, 24 bit/6ch for 96 kHz or less.
• When making DENON LINK connections, be sure to check the version of the AV amplifier to be
connected then make the “DENON LINK” setting at “initial settings” appropriately (
page 19). If two
DENON LINK terminals of different versions are interconnected, there may be no sound or only noise.
• When “DENON LINK” is set, downmixed audio signals are output from the DVD-2930CI’s analog audio
output terminals (L/R and FL/FR). When using the 5.1-channel analog audio terminals, set the “DENON
LINK” setting in the initial settings to “OFF”.
• The DVD-2930CI’s speaker settings are invalidated when the DENON LINK terminal is connected. (Make
the speaker settings on the AV amplifier to which the DVD-2930CI is connected.)
• When the DENON LINK 2nd connection, Super Audio CD’s signals are not output from the DENON LINK
terminal. Please use the analog audio output terminals.
Disc type
Dolby Digital
DVD-Audio
MULTI (NORMAL)
MULTI (LPCM)
2-channel PCM
Dolby Digital
Multi PCM
DTS
2-channel PCM
DTS
Multi PCM
2-channel PCM
Multi PCM
Multi PCM
LPCM or PPCM
2-channel PCM
Multi PCM
Multi PCM
Video CD
2-channel PCM
2-channel PCM
2-channel PCM
Music CD
2-channel PCM
2-channel PCM
2-channel PCM
MP3 CD
2-channel PCM
2-channel PCM
2-channel PCM
WMA CD
Connection to a device with an HDMI terminal
Super audio CD
¢ For a TV, amplifier, etc.
2CH
PCM
DVD-Video
Connecting the DVD-2930CI to device with an HDMI terminal using an HDMI cable (sold separately)
enables digital transfer of both digital video signals and multi-channel audio signals.
HDMI audio
Audio recording format
2-channel PCM
2-channel PCM
2-channel PCM
Multi area
No output
No output
No output
Stereo area
No output
No output
No output
CD layer
2-channel PCM
2-channel PCM
2-channel PCM
¢ Connection with an HDMI/DVI-D conversion cable (adapter)
• HDMI video streams (video signals) are compatible with DVI-D.
The DVD-2930CI can be connected to a TV with a DVI-D terminal using an HDMI/DVI-D conversion
cable (adapter), but depending on the combination of devices in some cases no picture will be
output.
• When using an HDMI/DVI-D conversion adapter, the picture may not be output properly due to poor
contact with the connected cable.
Monitor or
AV amplifier
I
HDMI
IN
Status of signal from
the DVD-2930CI’s HDMI
output terminal
HDMI-compatible monitor
Both video and audio
signals output
DVI-D-compatible monitor
(HDCP compatible)
Only video signals output
*
DVI-D-compatible monitor
(Not HDCP compatible)
Neither video nor audio
signals output
* The video signals are only output in RGB format.
11
ENGLISH
ENGLISH
Connections
Connections
Digital connection to a recording device (MD recorder, etc.)
NOTE:
• The audio signals of the multi and stereo areas of Super Audio CDs are not HDMI output.
• DVD-Audio discs that are copyright protected by CPPM can only be played on devices that are
mutually compatible with HDMI Ver. 1.1. (The DVD-2930CI is compatible with HDMI Ver. 1.1.)
• Some HDMI compatible devices can be used to control other devices via the HDMI terminal, but the
DVD-2930CI cannot be controlled via the HDMI terminal by other devices.
• The audio signals from the HDMI terminal (sampling frequency, bit length, etc.) may be restricted by
the connected device.
• Set the DVD-2930CI’s resolution according to the resolutions with which the connected TV or
monitor are compatible.
• Use a cable including the HDMI logo (HDMI certified product) for connection of the HDMI terminal.
Normal playback may not be possible if a cable that does not include the HDMI logo (non-HDMIcertified product) is used.
At “AUDIO SETUP”, set “DIGITAL OUTPUT” to “PCM” (
page 23), “DOWN SAMPLING” to “ON”
(
page 23).
Playing a DVD without first making the correct settings could result in noise that is unpleasant on the ears
and could damage the speakers.
MD recorder
D
OPTICAL
IN
or
C
COAXIAL
IN
¢ Copyright protection system
In order to play the digital video and audio signals of DVD-Video and DVD-Audio discs using HDMI
connections, both the player and the TV, AV amplifier, etc., must be compatible with a copyright
protection system called “HDCP” (High-bandwidth Digital Content Protection system). HDCP is a
copyright protection technology consisting of data encrypting and authentication of the connected
device.
The DVD-2930CI is HDCP compatible.
When a device that is not compatible with HDCP is connected, video signals will not be output
normally. For information on your TV, AV amplifier, etc., refer to its operating instructions.
Connecting the power supply cord
AC outlet
Power supply cord
(Included)
AC 120 V, 60 Hz
NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
12
ENGLISH
ENGLISH
Making the initial settings
Making the initial settings
Table of initial settings
Language setting
Description
Item you want to set (* indicates the setting upon purchase)
DIALOG
Set the audio language to be output.
ENGLISH*
SUB TITLE
Sets the language of the subtitles displayed on the TV screen.
DISC MENUS
Sets the language of the menus (top menu, etc.), recorded on the disc.
OSD LANGUAGE
Sets the language of the initial settings screen and the messages
displayed on the TV screen (“PLAY”, etc.).
HDMI RGB
SETTING
Use this procedure to set the digital RGB image range (data range)
output from the HDMI terminal.
Description
OFF*
ENGLISH
ENGLISH*
HDMI AUDIO
SETUP
TVASPECT
TVTYPE
COMPONENTVIDEOOUT
AUDIO/VIDEOSYNC
SQUEEZEMODE
PROGRESSIVEMODE
PIXELCROPPING
EXIT:SETUP/RETURN
SELECT:
WIDE(16:9)
MULTI
PROGRESSIVE
PROGRESSIVE
OFF
AUTO
OFF
SET:ENTER
GERMAN
JAPANESE
OTHERS
16
FRENCH
SPANISH
GERMAN
JAPANESE
OTHERS
16
FRENCH
SPANISH
GERMAN
JAPANESE
OTHERS
16
FRANÇAIS
ESPAÑOL
16
Item you want to set (* indicates the setting upon purchase)
NORMAL*
ENHANCED
2CH*
MULTI (NORMAL)
The properties and components of the
SPEAKER
different channels are set automatically
CONFIGURATION for the combination of speakers being
used.
FRONT SP
CENTER SP
SUBWOOFER
LARGE* /
SMALL
LARGE* / SMALL
/ (NONE)
YES* / (NO)
CHANNEL
LEVEL
Set the volume of the different
speakers so that the test tones output
from them sound to have the same
volume.
TEST TONE
DELAY TIME
This is a parameter for optimizing the
timing at which the sound is output from
the speakers and subwoofer according to
their distance from the listening position.
FRONT LCH
CENTER
OFF / AUTO /
MANUAL
DISTANCE
Page
17
MULTI (LPCM)
SURROUND SP
17
CROSSOVER
LARGE* / SMALL
40 / 60 / 80* / 100 / 120Hz
/ (NONE)
FRONT RCH
SURROUND SURROUND
SUBWOOFER
LCH
RCH
17, 18
18
0 ~ –10dB (0dB*)
SURROUND SURROUND
FRONT FRONT
CENTER
RCH
LCH
RCH
LCH
METERS /
FEET*
0 ~ 60ft (12ft*)
(0 ~ 18m (3.6m*))
0 ~ 60ft (10ft*)
(0 ~ 18m (3.0m*))
SUBWOOFER
DEFAULT
0 ~ 60ft (12ft*)
(0 ~ 18m (3.6m*))
ON
19
HDMI AUTO
FORMAT
Use this procedure to make the settings for the “AUTO” function
selected with the HDMI FORMAT button on the remote control unit.
DENON LINK
Set the DENON LINK terminal’s output according to the DENON
LINK version of the connected AV amplifier.
TV ASPECT
Set this according to the screen of the connected TV.
4:3 PS
4:3 LB
WIDE (16:9)*
20
TV TYPE
Set this according to the video format of the connected TV.
NTSC
PAL
MULTI*
20
COMPONENT
VIDEO OUT
Use this procedure to set the DVD-2930CI’s component video
output format.
AUDIO / VIDEO
SYNC
Set the video output to synchronize the audio signal.
SQUEEZE MODE
Use this procedure to set the output picture when “WIDE (16:9)” is
selected at “TV ASPECT”.
PROGRESSIVE
MODE
Sets the optimum progressive mode for the image material.
PIXEL
CROPPING
Set the horizontal display range with respect to the interlaced output.
Video setting
VIDEOSETUP
HDMI
SPEAKER
SETUP
(Can only be
set when
“MULTI
(LPCM)” is
selected)
SPANISH
ENGLISH*
Use this procedure to set the audio signals output from the HDMI
terminal.
Digital interface settings
Page
FRENCH
Description
PANEL RES.*
MAX RES.
OFF*
19
2nd
3rd
Item you want to set (* indicates the setting upon purchase)
13
ENGLISH
PROGRESSIVE*
PROGRESSIVE*
INTERLACED
INTERLACED
0* ~ 200 msec
(Offset time)
OTHERS
HDMI
19
Page
20
21
OFF*
ON
AUTO
21
AUTO*
VIDEO1
VIDEO2
21, 22
OFF*
ON
22
ENGLISH
Making the initial settings
Making the initial settings
Audio settings
Description
Item you want to set (* indicates the setting upon purchase)
MULTI CHANNEL*
Set the audio output.
AUDIO
CHANNEL
Viewing restriction setting
SPEAKER
SETUP
2CH (VSS1 ON)
Page
2CH (VSS2 ON)
The properties and components of the
SPEAKER
different channels are set automatically
CONFIGURATION for the combination of speakers being
used.
FRONT SP
CENTER SP
SUBWOOFER
LARGE* /
SMALL
LARGE* / SMALL
/ NONE
YES* / NO
CHANNEL
LEVEL
Set the volume of the different
speakers so that the volume of the test
tones output from them sounds the
same.
TEST TONE
FRONT
FRONT SURROUND SURROUND
SUBWOOFER
CENTER
LCH
LCH
RCH
RCH
SW
+10dB
OFF / AUTO /
MANUAL
0 ~ –10dB (0dB*)
OFF* / ON
DELAY TIME
This is a parameter for optimizing the
timing at which the sound is output from
the speakers and subwoofer according to
their distance from the listening position.
FRONT
LCH
DISTANCE
LARGE* / SMALL
40 / 60 / 80* / 100 / 120Hz
/ NONE
0 ~ 60ft (10ft*)
(0 ~ 18m (3.0m*))
22
CROSSOVER
SURROUND SP
SURROUND SURROUND
FRONT
CENTER
LCH
RCH
RCH
0 ~ 60ft (12ft*)
(0 ~ 18m (3.6m*))
METERS /
FEET*
SUBWOOFER
DEFAULT
0 ~ 60ft (12ft*)
(0 ~ 18m (3.6m*))
ON
22
22
22
DIGITAL
OUTPUT
Use this procedure to set the signal format of the digital audio
output.
NORMAL*
PCM
23
DOWN
SAMPLING
Use this procedure to set the digital audio output when playing
DVDs recorded in linear PCM or packed PCM.
OFF*
ON
23
SOURCE DIRECT
Use this procedure to making the setting for direct audio output of
the disc’s data without making the “SPEAKER SETUP” settings at
“AUDIO CHANNEL”.
BASS
ENHANCER
Sets the subwoofer output for when playing 2-channel or other
sources without LFE signals.
OFF*
ON
24
COMPRESSION
Use this procedure to set the dynamic range of the output signals
when playing DVDs recorded in Dolby Digital.
OFF*
ON
24
RATING LEVEL
0
A password can be set to restrict (prohibit) the playing of adult DVDs
(LOCK ALL)
so that children or others cannot view them.
PASSWORD
Use this procedure to change the password for the “RATING
LEVEL”.
CHANGE
25
REGISTRATION
Use this procedure to display the registration code for leasing or
purchasing DivX® VOD format video files using the DivX® VOD
(Video On Demand) service.
SHOW CODE
26
Item you want to set (* indicates the setting upon purchase)
Page
PLAYER MODE
Set the playback mode for playing the DVD-Video contents recorded
on DVD-Audio discs.
AUDIO*
VIDEO
26
CAPTIONS
Use this procedure to set the output of the closed caption signals to
display captions using a caption decoder (commercially available).
OFF*
ON
26
WALL PAPER
Use this procedure to set the picture to be displayed on the TV
screen when in the stop mode or when playing CDs.
SCREEN SAVER
The screensaver functions protects the TV screen from imprinting.
OFF*
ON
27
DISPLAY
If the display is turned off with the pure direct or dimmer function,
a description of operations can be displayed for about 2 seconds.
OFF*
ON
27
AUTO POWER
MODE
This function automatically sets the player’s power to the standby
mode if the player is left in the stop mode for about 30 minutes.
OFF*
ON
27
SLIDE SHOW
Use this procedure to set the time after which the still picture (in
JPEG format) switches when playing still pictures.
OFF*
Description
50kHz
100kHz
Item you want to set (* indicates the setting upon purchase)
Description
Special settings
2CH (VSS OFF)
14
ENGLISH
1
2
PICTURE*
3
4
BLACK
5 ~ 15 sec (5 sec*)
5
6
Page
8
(NO LIMIT)*
7
BLUE
GRAY
23, 24
25
26
27
ENGLISH
Making the initial settings
Making the initial settings
Operations for making the initial settings
4
Before starting playback, make the initial settings according to
your usage conditions.
Icon
1 Check that all the connections are proper.
on the TV’s power and switch its video input so
2 Turn
that the DVD-2930CI’s image can be seen.
<POWER>
3 Press <POWER>.
¢ ON:
5
VIDEOSETUP
Item you want to change
The power indicator lights green.
6
£ OFF: The power indicator turns off.
TVASPECT
TVTYPE
COMPONENTVIDEOOUT
AUDIO/VIDEOSYNC
SQUEEZEMODE
PROGRESSIVEMODE
PIXELCROPPING
EXIT:SETUP/RETURN
SELECT:
WIDE(16:9)
MULTI
PROGRESSIVE
PROGRESSIVE
OFF
AUTO
OFF
SET:ENTER
4 Press [SETUP].
[HDMI FORMAT]
• The initial settings screen is displayed.
5 Use [FF G] to select the item to be set.
D H] to select the item to be set, then press
[D
6 Use
[ENTER].
[NUMBER (0~9)]
[D H F G]
[RETURN]
[ENTER]
D H] again to select the item to be set, then press
[D
7 Use
[ENTER].
8 Once the settings are completed, press [SETUP].
[SETUP]
• The initial settings are stored in the memory and remain in effect
until they are changed, even if the power is turned off.
• Some of the items can be changed while a disc is playing.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
15
ENGLISH
Item to be set
7
ENGLISH
Making the initial settings
Making the initial settings
Language setting (
)
F G] to select “
Use [F
”.
¢ Language code list
Code
Language
Code
Language
Code
Language
Code
Language
4747
Afar
5271
Frisian
5868
Latvian; Lettish
6558
Slovenian
4748
Abkhazian
5347
Irish
5953
Malagasy
6559
Samoan
4752
Afrikaans
5350
Gaelic (Scotland)
5955
Maori
6560
Shona
4759
Ameharic
5358
Galician
5957
Macedonish
6561
Somali
DIALOG:
Set the audio language to be output.
4764
Arabic
5360
Guarani
5958
Malayalam
6563
Albanian
4765
Assamese
5367
Gujarati
5960
Mongolian
6564
Serbian
SUBTITLE:
Sets the language of the subtitles displayed on the TV screen.
4771
Aymara
5447
Hausa
5961
Moldavian
6565
Siswati
4772
Azerbaijani
5455
Hindi
5964
Marathi
6566
Sesotho
DISC MENUS:
Sets the language of the menus (top menu, etc.), recorded on the
disc.
4847
Bashkir
5464
Croatian
5965
Malay
6567
Sundanese
4851
Byelorussian
5467
Hungarian
5966
Maltese
6568
Swedish
4853
Bulgarian
5471
Armenian
5971
Burmese
6569
Swahili
4854
Bihari
5547
International language
6047
Nauru
6647
Tamil
4855
Bislama
5551
International language
6051
Nepali
6651
Telugu
4860
Bengali; Bangla
5557
Inupik
6058
Dutch
6653
Tajik
4861
Tibetan
5560
Indonesian
6061
Norwegian
6654
Thai
4864
Breton
5565
Icelandic
6149
Provençal
6655
Tigrinya
4947
Catalan
5566
Italian
6159
Oromo
6657
Turkmen
4961
Corsican
5569
Hebrew
6164
Oriya
6658
Tagalog
4965
Czech
5647
Japanese
6247
Panjabi
6660
Setswana
4971
Welsh
5655
Yiddish
6258
Polish
6661
Tonga
5047
Danish
5669
Javanese
6265
Pashto; Pushto
6664
Turkish
5051
German
5747
Georgian
6266
Portuguese
6665
Tsonga
5072
Bhutani
5757
Kazakh
6367
Quechua
6666
Tatar
5158
Greek
5758
Greenlandic
6459
Rhaeto-Romance
6669
Twi
5160
English
5759
Cambodian
6460
Kirundi
6757
Ukrainian
5161
Esperanto
5760
Kannada
6461
Romanian
6764
Urdu
5165
Spanish
5761
Korean
6467
Russian
6772
Uzbek
5166
Estonian
5765
Kashmiri
6469
Kinya-rwanda
6855
Vietnamese
5167
Basque
5767
Kurdish
6547
Sanskrit
6861
Volapük
5247
Persian
5771
Kirghiz
6550
Sindhi
6961
Wolof
5255
Finnish
5847
Latin
6553
Sango
7054
Xhosa
5256
Fiji
5860
Lingala
6554
Serbo-Croatian
7161
Yoruba
5261
Faroese
5861
Laothian
6555
Singhalese
7254
Chinese
5264
French
5866
Lithuanian
6557
Slovak
7267
Zulu
D H] to select the item to be set, then press
[D
1 Use
[ENTER].
OSD LANGUAGE:
Sets the language of the initial settings screen and the messages
displayed on the TV screen (“PLAY”, etc.).
2
D H] to select the language to be set, then press
Use [D
[ENTER].
1
(Select “ENGLISH” under “SUBTITLE”)
• If “OTHERS” is selected, refer to the “Language code list”, and use
[NUMBER] (0 ~ 9) to input the code number.
• If you do not want to display the subtitles, select “OFF” at
“SUBTITLE”. For some discs it is not possible to turn off the
subtitles.
16
ENGLISH
ENGLISH
Making the initial settings
Making the initial settings
Digital interface settings (
F G] to select “
Use [F
)
”.
HDMI RGB picture quality settings
Use this procedure to set the digital RGB image range (data range)
output from the HDMI terminal.
D H] to select “HDMI RGB SETTING”, then
[D
1 Use
press [ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
NORMAL (Upon purchase):
Output as “16 (black)” to “235 (white)”.
ENHANCED:
Output as “0 (black)” to “246 (white)”.
Depending on the TV you are using, the black colors may seem
to stand out when using HDMI connections. If so, set to
“ENHANCED”.
1
2
HDMI audio
HDMI speaker settings
Use this procedure to set the audio signals output from the HDMI
terminal.
D H] to select “HDMI AUDIO SETUP”, then
Use [D
1 press
[ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
2CH (Upon purchase):
2-channel linear PCM audio signals are output.
MULTI (NORMAL):
Multi- (5.1-) channel audio signals are output.
Output signal
• Dolby Digital/DTS discs:
Bitstream signals are output
• Linear PCM / Packed PCM discs:
Linear PCM signals are output
MULTI (LPCM):
Multi- (5.1-) channel audio signals are output.
It is also possible to make the “SPEAKER CONFIGURATION”,
“CHANNEL LEVEL” and “DELAY TIME” settings (
page 17~19).
Output signal
• Dolby Digital/DTS discs:
Decoded Linear PCM signals output
• Linear PCM / Packed PCM discs:
Linear PCM signals are output
At “HDMI AUDIO SETUP”, select “MULTI (LPCM)”. The “HDMI SPEAKER
SETUP” screen appears. Make the “SPEAKER CONFIGURATION”,
“CHANNEL LEVEL” and “DELAY TIME” settings.
¢ Speaker settings
The properties and components of the different channels are set
automatically for the combination of speakers being used.
D H] to select “MULTI (LPCM)”, then press
[D
1 Use
[ENTER].
D H] to select “SPEAKER CONFIGURATION”,
[D
2 Use
then press [ENTER].
3 Use [DD H] to select the speaker, then press [ENTER].
D H] to select the speaker type, then press
[D
4 Use
[ENTER].
LARGE (Upon purchase), SMALL:
Select “LARGE” if you have connected large speakers with strong
low frequency reproduction capabilities, “SMALL” if you have
connected small speakers that do not provide strong bass sound.
HDMI SPEAKER SETUP:
It is not possible to select “NO” for the HDMI speaker setting.
CROSSOVER:
For speakers set to “SMALL”, the sound with frequencies below
that of the crossover frequency are cut. This bass sound that has
been cut is output from the subwoofer or a speaker for which
“LARGE” is set.
• 40, 60, 80 (Upon purchase), 100, 120Hz:
Select according to the low frequency reproduction capabilities of
the connected speaker.
1
2
• No effect when the HDMI terminal’s video setting is set to “YCbCr”
(
page 29).
17
ENGLISH
ENGLISH
Making the initial settings
Making the initial settings
¢ Channel level
1
Set the volume of the different speakers so that the test tones output
from them sound to have the same volume.
1
D H] to
HDMI speaker setting screen, use [D
1 Atselectthe“CHANNEL
LEVEL”, then press [ENTER].
2
2
D H] to select “TEST TONE”, use [F
F G] again
[D
2 Use
to make the settings, then press [ENTER].
OFF:
No test tones are output.
AUTO:
Adjust the volumes while listening to the test tones output
automatically from the different speakers.
3
MANUAL:
Switch the speaker from which the test tone is output manually as
you adjust the volumes.
4
is selected:
3 IfUse“AUTO”
F G] to adjust the volume.
[F
-1
The display differs
depending on the
connected speaker.
CENTER
SURROUND LCH
-1
3
• The volume can be adjusted between the range of 0 to –10 dB.
• The test tones are output automatically in the order shown
below.
FRONT LCH
SUBWOOFER
3
-2
FRONT RCH
SURROUND RCH
is selected:
3 IfUse“MANUAL”
D H] to select the speaker, use [F
F G] to adjust
[D
-2 the volume, the press [ENTER].
• To return to the setting screen:
Press [RETURN].
• To return to the setting screen:
Press [RETURN].
18
ENGLISH
ENGLISH
Making the initial settings
Making the initial settings
¢ Delay time
DENON LINK
This is a parameter for optimizing the timing at which the sound is
output from the speakers and subwoofer according to their distance
from the listening position.
1
D H] to
At the HDMI speaker setting screen, use [D
select “DELAY TIME”, then press [ENTER].
2
D H] to select “DISTANCE”, use [F
F G] to set
Use [D
“METERS” or “FEET”.
• Set the difference between the distances for the different speakers
to no more than 15 feet (4.5 meters).
• To return to the setting screen:
Press [RETURN].
HDMI auto format
Use this procedure to make the settings for the “AUTO” function
selected with [HDMI FORMAT] (
page 29).
D H] to select the speaker, then use [F
F G] to set
Use [D
D H] to select “HDMI AUTO FORMAT”, then
Use [D
3 the
1 press
distance.
[ENTER].
• The distance can be set between the range of 0 to 60 feet (0
to 18 meters).
If you select “DEFAULT” and press [ENTER], the delay time
settings are restored to the values set when you purchased the
player.
1
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
PANEL RES. (Upon purchase):
The number of pixels of the connected HDMI device’s panel is
detected and the HDMI output resolution is selected automatically.
MAX RES.:
The maximum resolution that can be input to the connected HDMI
device is detected and the HDMI output resolution is selected
automatically.
1
2
Set the DENON LINK terminal’s output according to the DENON LINK
version of the connected AV amplifier.
D H] to select “DENON LINK”, then press
[D
1 Use
[ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
OFF (Upon purchase):
No digital audio signals are output from the DENON LINK terminal.
Select this when not connecting the DENON LINK terminal.
2nd:
The signals are output in DENON LINK 2nd Edition format.
The following digital audio signals can be transferred:
DVD-Audio, DVD-Video, music CD and video CD signals
3rd:
The signals are output in DENON LINK 3rd Edition format.
The following digital audio signals can be transferred:
Super Audio CD, DVD-Audio, DVD-Video, music CD and video CD
signals
1
2
2
3
• The DENON LINK setting with respect to the DENON LINK version
of the connected AV amplifier is as shown below.
19
ENGLISH
AV amplifier’s DENON LINK version
DENON LINK setting
2nd Edition
(“S.E.” is indicated near the terminal)
“2nd”
3rd Edition
(“3rd” is indicated near the terminal)
“3rd” (or 2nd)
ENGLISH
Making the initial settings
Video setting (
Making the initial settings
TV type
)
F G] to select “
Use [F
Component video output
Set this according to the video format of the connected TV.
”.
TV aspect ratio
Set this according to the screen of the connected TV.
D H] to select “TV ASPECT”, then press
[D
1 Use
[ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
4:3 PS:
Select this if the screen’s vertical:horizontal ratio is 4:3.
Software recorded in wide screen format is played in the pan & scan
mode (with the left and right sides of the screen cut. Software for
which pan & scan is not specified, however, is played in the letter
box mode (with black bands at the top and bottom of the screen).
4:3 LB:
Select this if the screen’s vertical:horizontal ratio is 4:3.
Software recorded in wide screen format is played in the letter box
mode.
Use this procedure to set the DVD-2930CI’s component video output
format.
1 Use [DD H] to select “TV TYPE”, then press [ENTER]. 1 Use [DD H] to select “COMPONENT VIDEO OUT”,
then press [ENTER].
D H] to select the item to be set, then press
Use [D
2 [ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
NTSC:
Select this if the connected TV is of the NTSC type.
PAL:
Select this if the connected TV is of the PAL type.
PROGRESSIVE (Upon purchase):
Sets to the progressive format.
In this format there is less flickering than with the interlaced format.
MULTI (Upon purchase):
Select this if the connected TV is of both the NTSC and PAL types.
INTERLACED:
Sets to the interlaced format.
1
1
2
2
WIDE (16:9) (Upon purchase):
Select this when a wide-screen TV is connected.
Software recorded in wide screen format is played over the entire
screen.
1
2
• The picture will not be displayed properly if a video format different
from the connected TV’s type is set.
• When outputting video signals from the HDMI terminal, the video
signals output from the component video terminals are interlaced.
20
ENGLISH
ENGLISH
Making the initial settings
AV Synchronized
Set the video output to synchronize the audio signal.
D H] to select “AUDIO/VIDEO SYNC”, then
Use [D
1 press
[ENTER].
Making the initial settings
1
Offset time
When “AUDIO/VIDEO SYNC” is set, switches to the “offset time”
setting screen.
2
D H] to set, then press [ENTER].
Use [D
• The time can be set between the range of 0 to 200 msec.
2
D H] to select the item to be set, then press
Use [D
[ENTER].
PROGRESSIVE (Upon purchase):
Synchronizes the sound with the progressive mode.
INTERLACED:
Synchronizes the sound with the interlaced mode.
HDMI:
Synchronizes the sound with the HDMI mode.
OTHERS:
Select this when you want to view progressive, interlaced and
HDMI pictures simultaneously.
The audio signals are set to the optimum timing for the respective
pictures. (They are not synchronized.)
To synchronize the audio signals, set to something other than
“OTHERS”.
1
2
• No effect for interlaced video outputs.
Progressive mode
Sets the optimum progressive mode for the image material.
Squeeze mode
Use this procedure to set the output picture when “WIDE (16:9)” is
selected at “TV ASPECT” (
page 20).
D H] to select “PROGRESSIVE MODE”, then
[D
1 Use
press [ENTER].
D H] to select “SQUEEZE MODE”, then press
[D
D H] to select the item to be set, then press
[D
1 Use
[ENTER].
2 Use
[ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
AUTO (Upon purchase):
The material type (film or video) is automatically identified from the
disc and the mode is selected automatically.
OFF (Upon purchase):
The picture is displayed over the entire 16:9 TV screen, regardless
of the original image size.
ON:
The picture is displayed in the center of the 16:9 TV screen with a
4:3 aspect ratio, regardless of the original image size.
AUTO:
When playing 4:3 images, the picture is displayed in the center of
the 16:9 TV screen with a 4:3 aspect ratio.
21
ENGLISH
VIDEO1:
This mode is suited for playing video material discs.
VIDEO2:
This mode is suited for playing video material discs and 30-frame
film material discs.
ENGLISH
Making the initial settings
1
Making the initial settings
Audio settings (
2
)
F G] to select “
Use [F
”.
Audio channels
Set the audio output.
D H] to select “AUDIO CHANNEL”, then press
[D
1 Use
[ENTER].
Horizontal display range
Set the horizontal display range with respect to the interlaced output.
D H] to select “PIXEL CROPPING”, then press
[D
1 Use
[ENTER].
2
D H] to select the item to be set, then press
Use [D
[ENTER].
OFF (Upon purchase):
Select this when a regular consumer TV is connected.
ON:
When a professional monitor is connected, select this if the image’s
synchronization is disturbed.
1
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
MULTI CHANNEL (Upon purchase):
Select this when using 3 or more speakers. The “SPEAKER
CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME”
setting screens appear.
2CH (VSS OFF):
Select this when using 2 speakers and a Dolby Pro Logic decoder
(Dolby Pro Logic compatible amplifier).
2CH (VSS1 ON):
This setting provides a natural surround effect in a system with 2
speakers connected.
2CH (VSS2 ON):
This settings provides a stronger surround effect in a system with 2
speakers connected than VSS1.
1
2
2
22
ENGLISH
• The procedure for making the “SPEAKER CONFIGURATION”,
“CHANNEL LEVEL” and “DELAY TIME” settings is the same as
when “MULTI (LPCM)” is selected at “HDMI AUDIO SETUP” (
page 17).
• When “ON” is selected for “SW+10dB” at “CHANNEL LEVEL”,
the volume of the sound output from the subwoofer can be set 10
dB higher.
¢ About V.S.S. (Virtual Surround Sound)
• Using the V.S.S. function lets you enjoy a surround effect with only
2 speakers (left and right).
• This function is only effective for DVDs recorded in Dolby Digital,
DTS, MPEG, LPCM with 2 or more channels.
• For some discs the effect may be weak or there may be no effect
at all.
• For some discs the sound may be distorted when using this
function. If so, set the V.S.S. function to “OFF”.
• Cancel other surround functions (for example, the TV’s surround
mode) when using this function.
• The effect is stronger if the listening position is approximately 3 to
4 times the distance of the space between the front speakers (or
the sideways width of the TV when using the TV’s speakers).
ENGLISH
Making the initial settings
Digital output
Making the initial settings
Downsampling
Use this procedure to set the signal format of the digital audio output.
Source direct
Use this procedure to set the digital audio output when playing DVDs
recorded in linear PCM or packed PCM.
D H] to select “DIGITAL OUTPUT”, then press
[D
1 Use
D H] to select “DOWN SAMPLING”, then
Use [D
[ENTER].
1 press
[ENTER].
D
H
[D ] to select the item to be set, then press
2 Use
[ENTER].
2 Use [DD H] to select the item to be set, then press
NORMAL (Upon purchase):
Select this when an AV amplifier with built-in Dolby Digital or DTS
decoder is connected to the DVD-2930CI’s digital audio output
terminal.
When playing discs recorded in Dolby Digital or DTS, the
corresponding bitstream signals are output.
PCM:
When playing discs recorded in Dolby Digital or DTS, the signals are
converted to 48 kHz/16 bit PCM (2-channel) before being output.
1
2
Use this procedure to making the setting for direct audio output of the
disc’s data without making the “SPEAKER SETUP” settings at
“AUDIO CHANNEL”.
Making this setting allows you to enjoy full-band playback of all
channels, as recommended for DTS. (Note that this setting increases
the volume of the subwoofer by 5 dB, or 15 dB for Super Audio CDs.)
This setting also lets you enjoy playback of 6-channel DVD-Audio
sources recorded in full frequency band for all channels.
[ENTER].
OFF (Upon purchase):
For DVDs recorded in linear PCM or packed PCM without copyright
protection, 2-channel audio signals of up to 96 kHz are output as
linear PCM signals with no conversion. (192 kHz and 176.4 kHz
signals are converted to 96 kHz and 88.2 kHz, respectively.)
ON:
Linear PCM or packed PCM signals are converted to 48 kHz or less
for output.
Set to “ON” when using digital connections to an AV amplifier
that is not compatible with sampling frequencies of 192 kHz,
176.4 kHz, 96 kHz and 88.2 kHz.
1
2
D H] to select “SOURCE DIRECT”, then press
[D
1 Use
[ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
OFF (Upon purchase):
Select this when playing using the “SPEAKER SETUP” and “BASS
ENHANCER” settings.
50kHz, 100kHz:
When playing Super Audio CDs, frequencies higher that these
respective frequencies are cut.
Set to “100kHz” when using an amplifier compatible with high
frequencies.
1
AUDIOSETUP
AUDIOCHANNEL
DIGITALOUTPUT
DOWNSAMPLING
SOURCEDIRECT
BASSENHANCER
COMPRESSION
EXIT:SETUP/RETURN
SELECT:
• When playing discs recorded in linear PCM or packed PCM, the
signals are output in linear PCM format, regardless of this setting.
• For DVDs containing multi-channel PCM signals, the signals are
down-mixed into the 2-channels and output in digital format. (For
sources for which down-mixing is prohibited, only the FL and FR
channels are output.)
• When playing linear PCM or packed PCM DVDs with copyright
protection, due to considerations for the copyright holder, digital
output is not possible for sources of 48 kHz/16 bit or more.
To play such sources, either set to “ON”, use DENON LINK or
analog connections (
page 9, 10).
23
ENGLISH
2
OFF
50kHz
100kHz
SET:ENTER
ENGLISH
Making the initial settings
Making the initial settings
Bass enhancer
• When setting “100kHz”, first check the range of the connected
amplifier and speakers to avoid damage to the connected
equipment.
• When setting “50kHz” or “100kHz”, set all the speaker sizes to
“LARGE” and the subwoofer to “YES”. Make analog connections if
you want to play DVD-Audio discs.
• The “CHANNEL LEVEL” and “DELAY TIME” settings remain in
effect even when “50kHz” or “100kHz” is set.
Dynamic range compression
Sets the subwoofer output for when playing 2-channel or other
sources without LFE signals.
Use this procedure to set the dynamic range of the output signals
when playing DVDs recorded in Dolby Digital.
D H] to select “BASS ENHANCER”, then press
D H] to select “COMPRESSION”, then press
[D
[D
1 Use
1 Use
[ENTER].
[ENTER].
D H] to select the item to be set, then press
D H] to select the item to be set, then press
[D
[D
2 Use
2 Use
[ENTER].
[ENTER].
OFF (Upon purchase):
No sound is output from the subwoofer.
OFF (Upon purchase):
The sound is played with the standard dynamic range.
ON:
Sound is output from the subwoofer.
Set “SUBWOOFER” at “SPEAKER CONFIGURATION” to “YES”.
ON:
Select this to achieve a powerful sound even when the volume is
low.
This setting is suited for use at night with the volume set low.
1
1
2
2
• This setting is only effective for analog outputs.
• This setting is ineffective when “SOURCE DIRECT” is set to
“50kHz” or “100kHz”.
24
ENGLISH
• Dynamic range:
This is the ratio between the softest sound that can be played
without being drowned out by the noise generated by the
equipment and the loudest sound that can be produced without the
sound breaking up.
ENGLISH
Making the initial settings
Making the initial settings
Viewing restriction setting (
F G] to select “
Use [F
)
1
Password
Use this procedure to change the password for the “RATING LEVEL”.
”.
D H] to select “PASSWORD”, use [G
G] to select
Use [D
1 “CHANGE”,
then press [ENTER].
Viewing restriction level
A password can be set to restrict (prohibit) the playing of adult DVDs
so that children or others cannot view them.
1
Use [NUMBER] (0 ~ 9) to input the passwords (4 digits)
2 (password
→ new password → new password (reinput)),
2
then press [ENTER].
D H] to select “RATING LEVEL”, then press
Use [D
[ENTER].
D H] to select the setting level, then press
[D
2 Use
[ENTER].
1
3
0 (LOCK ALL):
This restricts playback of all DVDs.
2
1:
This restricts playback of adult and regular DVDs.
Select this when you only want to play DVDs for children.
2 ~ 7:
This restricts playback of adult DVDs.
Select this when you want to play both DVDs for children and
regular DVDs.
8 (NO LIMIT) (Upon purchase):
With this setting, all DVDs can be played.
Use [NUMBER] (0 ~ 9) to input the password (4 digits),
3 then
press [ENTER].
The default setting for the password is “0000”.
• If the discs includes viewing restriction levels, the password input
screen appears.
• If the discs does not include viewing restriction levels, viewing
cannot be restricted.
• Be careful not to forget the password.
If you do, reset it to the default setting set when the player was
purchased (
page 46).
25
ENGLISH
ENGLISH
Making the initial settings
Displaying the registration code
Use this procedure to display the registration code for leasing or
purchasing DivX® VOD format video files using the DivX® VOD (Video
On Demand) service.
1 Use [DD H] to select “REGISTRATION”.
2 Use [GG] to select “SHOW CODE”, then press [ENTER].
• The 8-digit registration code is displayed.
1
Making the initial settings
Special settings (
F G] to select “
Use [F
1
)
”.
2
Player mode
Set the playback mode for playing the DVD-Video contents recorded
on DVD-Audio discs.
D H] to select “PLAYER MODE”, then press
[D
1 Use
[ENTER].
2
D H] to select the playing mode, then press
Use [D
[ENTER].
• A caption decoder is required in order to display captions.
• For DVDs including caption signals, the “
”, “
” or “
mark is displayed.
”
AUDIO (Upon purchase):
DVD-Audio discs are played as such.
2
VIDEO:
The DVD-Video contents included on DVD-Audio discs are played.
1
Wallpaper
Use this procedure to set the picture to be displayed on the TV screen
when in the stop mode or when playing CDs, etc.
D H] to select “WALL PAPER”, then press
[D
1 Use
[ENTER].
2
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
PICTURE (Upon purchase), BLACK, GRAY, BLUE:
Set the wallpaper to “PICTURE”, “BLACK”, “GRAY” or “BLUE”.
• For details, go to the URL: http://www.divx.com/vod
1
Captions
Use this procedure to set the output of the closed caption signals to
display captions using a caption decoder (commercially available).
D H ] to select “CAPTIONS”, then press
[D
1 Use
[ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
OFF (Upon purchase), ON:
Select “OFF” if you do not want to display the captions on the
screen, “ON” if you want to display them.
26
ENGLISH
2
ENGLISH
Making the initial settings
Screensaver
Making the initial settings
1
Display
The screensaver functions protects the TV screen from imprinting.
If the display is turned off with the pure direct or dimmer function, a
description of operations can be displayed for about 2 seconds.
2
D H] to select “SCREEN SAVER”, then press
[D
1 Use
[ENTER].
1 Use [DD H] to select “DISPLAY”, then press [ENTER].
D H] to select the item to be set, then press
[D
D H] to select the item to be set, then press
[D
2 Use
2 Use
[ENTER].
[ENTER].
OFF (Upon purchase):
When this is set, the screensaver function does not work.
ON:
When this is set, the screensaver function is activated after about 5
minutes in the stop or pause mode.
1
OFF (Upon purchase), ON:
Set to “OFF” if you do not want the display to light, to “ON” if you
do want the display to light.
1
Slide switching time
2
Use this procedure to set the time after which the still picture (in
JPEG format) switches when playing still pictures.
2
D H] to select “SLIDE SHOW”, then press
[D
1 Use
[ENTER].
D H] to select the time to be set, then press
[D
2 Use
[ENTER].
5 (Upon purchase) ~ 15 sec:
The still picture switches after the selected time.
1
Auto power mode
This function automatically sets the player’s power to the standby
mode if the player is left in the stop mode for about 30 minutes.
D H] to select “AUTO POWER MODE”, then
Use [D
1 press
[ENTER].
D H] to select the item to be set, then press
[D
2 Use
[ENTER].
OFF (Upon purchase), ON:
Select “OFF” if you do not want the power to be set to the standby
mode automatically, “ON” if you do want it to be set to the standby
mode.
27
ENGLISH
2
ENGLISH
Other settings
Other settings
Using the pure direct mode
Use this function to stop output of video signals, etc., and output only
the analog audio signals to achieve high quality sound.
1
In the stop mode, press [PURE DIRECT MEMORY].
2
D H] to select “MODE 1” or “MODE 2”, then
Use [D
press [ENTER].
[PURE DIRECT
MEMORY]
[PURE DIRECT
SELECT]
D H] to select the item you want to set, press
[D
3 Use
D H] again to make the setting.
[ENTER], then use [D
DIGITAL OUTPUT:
• ON (Upon purchase), OFF:
Select whether or not to output signals to the digital audio output
terminals.
NORMAL:
All signals are output.
MODE 1:
The player operates as per the settings stored at “MODE 1”.
MODE 2:
The player operates as per the settings stored at “MODE 2”.
ALL OFF:
Only the analog audio signals are output.
2
The DENON LINK digital output circuitry does not function.
VIDEO OUT:
• ON (Upon purchase), OFF:
Select whether or not to output video signals.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
• The mode is indicated on the display.
• The pure direct memory screen appears.
[D H ]
[ENTER]
[PURE DIRECT SELECT] and select the setting
5 Press
mode.
3
DISPLAY:
• ON (Upon purchase), OFF:
Select whether or not to light the DVD-2930CI’s display.
4 Press [PURE DIRECT MEMORY].
• The settings are stored at “MODE 1” or “MODE 2”.
• With HDMI connections, no video or audio signals are output from
the HDMI terminals if “VIDEO OUT” is set to “OFF” in step 3 or if
the “ALL OFF” mode is selected in step 5.
28
ENGLISH
ENGLISH
Other settings
Other settings
HDMI FORMAT
Making the settings for the picture output from
the HDMI terminal
Changing the signal format
HDMI SELECT
HDMI FORMAT
¢ When the signal format is set to “YCbCr” or
“RGB”
Press HDMI SELECT and select the setting mode.
Press HDMI FORMAT and select the mode.
• The mode is indicated on the display.
• The mode is indicated on the display.
HDMI OFF (Upon purchase):
No video or audio signals are output from the HDMI terminal.
AUTO:
The performance of the HDMI device connected to the HDMI
terminal is detected automatically and the resolution for its panel’s
pixel number or the maximum resolution that can be input is output.
YCbCr:
Component format video signals and audio signals are output from
the HDMI terminal.
HDMI SELECT
Changing the resolution
The output resolution is set at “HDMI AUTO FORMAT” under
“digital interface setting” (
page 19).
RGB:
RGB format video signals and audio signals are output from the
HDMI terminal.
480/576i, 480/576P (Upon purchase), 720P, 1080i, 1080P:
The video signal from the HDMI terminal is converted to the
selected resolution for output.
PC RES.:
RGB format video signals with a resolution for use on computers
and audio signals are output from the HDMI terminal.
The output is set to 60 Hz, regardless of whether the disc being
played in NTSC or PAL.
The video output when “480/576i” is selected is 480i for NTSC,
576i for PAL.
The video output when “480/576P” is selected is 480P for NTSC,
576P for PAL.
Set to “YCbCr” or “RGB” if the TV or monitor connected to the
HDMI terminal is not compatible with computer resolutions.
[D H F G]
• The resolution is the same for “YCbCr” and “RGB”.
[ENTER]
¢ When the signal format is set to “PC RES.”:
[PICTURE
ADJUST]
• The picture may be disturbed even if the TV or monitor connected
to the HDMI terminal is compatible with computer resolutions.
• When outputting video signals from the HDMI terminal, the video
signals output from the component video terminals are interlaced.
Press HDMI FORMAT and select the mode.
• Select the video resolution output from the HDMI terminal.
• The mode is indicated on the display.
VGA (Upon purchase):
The signal is converted to a resolution of 640 x 480 (60 Hz).
XGA:
The signal is converted to a resolution of 1024 x 768 (60 Hz).
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
WXGA:
The signal is converted to a resolution of 1280 x 768 (60 Hz).
SXGA:
The signal is converted to a resolution of 1280 x 1024 (60 Hz).
29
ENGLISH
ENGLISH
Other settings
Other settings
¢ Picture quality adjustment setting memory list
Adjusting the picture quality
Storing the picture quality settings in the
memory
Use this procedure to store picture quality settings you have adjusted
to suit your tastes at memory positions 1 to 5.
1 Press [PICTURE ADJUST].
F G] to select one of memory positions “M1” to
[F
2 Use
“M5”, then press [ENTER].
3
Item
STD
STANDARD
M1
MEMORY1
M2
MEMORY2
M3
MEMORY3
M4
MEMORY4
M5
MEMORY5
Picture quality settings can be stored
at “Adjust 1” to “Adjust 4”.
¢ List of picture quality adjustment modes
Item
H], use [F
F G] to select one setting from
Press [H
“Adjust 1” to “Adjust 4”, then press [ENTER].
For instructions on making “Adjust 4”, see “Gamma correction”
(
page 31).
Adjust 1
4
Description
Upon purchase (initial value)
F G] again to select the item to be adjusted, use
Use [F
D H] to adjust, then press [ENTER].
[D
• The settings are stored at the corresponding memory position.
1
Adjustment range
(initial value)
Description
CONTRAST
Adjusts the difference between the bright and dark parts of
–6 ~ +6
the picture.
(0)
BRIGHTNESS
Adjust the brightness of the picture.
(0)
0 ~ +12
SHARPNESS (high range)
Adjusts the sharpness of the picture for the medium
–6 ~ +6
frequency range. ( 1)
Adjusts the sharpness of the picture for the high frequency
–6 ~ +6
range. ( 2)
HUE (color tone)
Adjusts the balance between the green and red. (
WHITE LEVEL
Adjusts the white level.
BLACK LEVEL
Adjusts the black level. (
CHROMA LEVEL
Adjusts the density of the colors.
ENHANCER
Strengthens the contours of the picture. (
DNR (Digital Noise Reduction)
Reduces the overall level of noise on the picture.
MPEG NR (MPEG Noise Reduction)
Reduces the noise of the contours of letters and other such
ON/OFF
parts.
SETUP LEVEL
Corrects for unnatural look in the black colors.
0 IRE/7.5 IRE (7.5)
H.POSITION (horizontal direction)
Adjusts the left/right position. (
–7 ~ +7
(0)
V.POSITION (vertical direction)
Adjusts the top/bottom position. (
–7 ~ +7
(0)
SHARPNESS (medium range)
2)
3)
(0)
(0)
–6 ~ +6
(0)
–5 ~ +5
(0)
–5 ~ +5
(0)
–6 ~ +6
(0)
0 ~ +11
(0)
0 ~ +3
(0)
Adjust 2
2
3
When “M1“ is selected
When ”Adjust 2”
is selected
Adjust 3
2)
2)
2)
4
Adjust 4
G0 ~ G9 (gamma correction)
When “CONTRAST“ is selected
16 ~ 235
(G0=24/G1=32/G2=48
/G3=64/G4=80/G5=96
/G6=128/G7=160/
G8=192/G9=224)
1: Does not affect the HDMI output.
2: Affects the progressive and HDMI output.
3: Does not effect the component output’s interlaced output.
¢ To quit the picture quality adjustment mode:
Press [PICTURE ADJUST] again.
Detailed adjustment of the picture’s brightness.
30
ENGLISH
(OFF)
ENGLISH
Other settings
Other settings
Gamma correction
Make these adjustments using numerical tables or graphs.
Reference:
Horizontal axis: Brightness level of pictures recorded on disc
Vertical axis:
Brightness level of pictures upon output from
the DVD-2930CI
adjust using the numerical tables:
1 ToAt “Adjust
H].
4”, press [H
To adjust using the graphs:
At “Adjust 4”, press [ENTER].
F G] to select the point to be adjusted, use [D
D H]
[F
2 Use
to adjust the brightness level, then press [ENTER].
[D H F G]
[ENTER]
When a bright
side is adjusted
pictures whose
normally hard
easier to see.
point on the disc
to the “dark” side,
bright sections are
to see become
• The settings are stored at the corresponding memory position.
It is not possible to set the level of the selected point to a value
overlapping those of the adjacent points.
(For example, if G3 is set to 64 and G5 is set to 96, G4 cannot be
set to values of 64 or less or 96 or greater.)
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
(Numerical table)
(Graph)
¢ To set back to the standard level:
Press [CLEAR].
31
ENGLISH
When a dark point on the disc side
is adjusted to the “bright” side,
pictures whose dark sections are
normally hard to see become
easier to see.
ENGLISH
Basic Operation
Basic Operation
<ON/STANDBY>
5 12
Turning the power on
Playing discs
Press <POWER>.
Press 1.
• “0h00m00s” is displayed if no disc is loaded.
¢ ON:
The power indicator lights green.
£ OFF:
The power indicator turns off.
The power indicator lights red if the standby mode is set by
pressing <ON STANDBY> or [POWER OFF].
<POWER>
• The “1” indicator lights and playback starts.
• For details, refer to the disc’s instructions.
Some discs may be designed by the software producer to operate
in ways other than described in this manual.
¢ Turning the power off:
Press <POWER> again.
[POWER OFF]
To stop playback
5
Press 2.
• When the power is turned off from the standby mode, it is set to the
standby mode when the power is turned back on.
NOTE:
• When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
• Playback stops and the wallpaper is displayed.
If “AUTO POWER MODE” at “OTHER SETUP” is set to “ON”
in the initial settings (
page 27), the power automatically
turns off and is set to the standby mode if the player is left in the
stop mode for about 30 minutes.
¢ Resume play memory function
2
1
Loading discs
Press 5.
For instructions on loading discs, see page 4.
If 2 is pressed during playback, the position at which the disc was
stopped is stored in the memory (“1” flashes on the display).
If 1 is pressed now, playback resumes from the point at which it was
stopped.
The resume play memory function is canceled if the disc tray is
opened or 2 is pressed again.
¢ To close the disc tray:
Press 5 again.
• The resume play memory function only functions for discs for which
the elapsed time is indicated on the display during playback.
• The resume play memory function does not function during menu
playback.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
32
ENGLISH
ENGLISH
Basic Operation
Basic Operation
To pause playback
1
TOP MENU
9
Press 3.
• The “3” indicator lights and the pause mode is set.
Apple
Banana
Orange
Strawberry
Peach
Pineapple
e
Orange
¢ To resume playback:
Press 1.
Example: When “Orange” is selected
3
About DVD-Video discs
Titles and chapters:
DVD-Video discs are divided into several large sections (titles) and
small sections (chapter). These sections are all allotted numbers,
called the title numbers and chapter numbers.
For example:
Title 1
[NUMBER
(0~9, +10)]
Chapter 1
[ANGLE]
[TOP MENU]
[D H F G]
[MENU]
9
Chapter 2
Title 2
Chapter 3
Chapter 1
Chapter 2
[AUDIO]
[SUBTITLE]
[ENTER]
1
3
Playing DVD-Video discs
Some DVDs display menu screens.
Select the desired item, then start playback.
1 Use [DD H F G] to select the item you want to see.
2 Press [ENTER].
• Playback starts.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
33
ENGLISH
• While playing a DVD, press [TOP MENU] or [MENU] to return to the
menu screen.
• To display the next page of the menu, press 9.
ENGLISH
Basic Operation
Basic Operation
Using the top menu and DVD menu
For DVDs containing multiple titles, the desired title can be selected
and played from the top menu.
Some DVDs also have special menus called “DVD menu”.
Switching the audio language
(Multiple-Audio Function)
The audio language can be switched when playing DVDs containing
multiple audio languages.
1
1
D H F G] or [NUMBER] (0 ~ 9, +10) to select the
[D
2 Use
desired title.
Press [TOP MENU] or [MENU] during playback.
Press [AUDIO] during playback.
Switching the angle (Multiple-Angle Function)
The angle can be switched when playing DVDs containing multiple
angles.
1 Press [ANGLE] during playback.
• The currently playing angle number is displayed.
• The currently playing audio number is displayed.
• Step 3 can be skipped if you use [NUMBER] (0 ~ 9, +10).
3 Press [ENTER] or 1.
2 Use [DD H] to select the desired language.
• Playback starts.
The display turns off when [AUDIO] is pressed.
2 Use [DD H] to select the desired angle.
TOP MENU
Banana
Orange
Strawberry
2. AUDIO
Peach
Pineapple
3. ANGLE
Example: Top menu
The display turns off when [ANGLE] is pressed.
DVD MENU
1. SUBTITLE
Apple
Example: DVD menu
Switching the subtitle language
(Multiple-Subtitle Function)
The subtitle language can be switched when playing DVDs containing
multiple subtitle languages.
About DVD-Audio discs
1
Groups and tracks:
DVD-Audio discs are divided into several large sections (groups)
and small sections (tracks). These sections are all allotted
numbers, called the group numbers and track numbers.
Press [SUBTITLE] during playback.
• The currently playing subtitle number is displayed.
For example:
Group 1
Track 1
2
D H] to select the desired language.
Use [D
The display turns off when [SUBTITLE] is pressed.
34
ENGLISH
Track 2
Group 2
Track 3
Track 1
Track 2
ENGLISH
Basic Operation
Basic Operation
Switching between groups and tracks
1
1
In the stop or play mode, press [SEARCH MODE] and
select the search mode.
• The mode switches each time the button is pressed and is
indicated at the bottom left of the screen, as shown below.
GROUP 1/3
SUPER AUDIO CD SETUP
TRACK 3/10
[NUMBER] (0 ~ 9, +10) input the number of the
2 Use
group or track you want to play.
Selecting still pictures
For DVD-Audio discs containing still pictures, the desired still picture
can be selected.
Press [PAGE +] or [PAGE –] during playback.
Some discs may be designed by the software producer so that
the image cannot be selected.
About Super Audio CDs
• Playback starts from the specified group or track.
There are three types of Super Audio CDs.
qSingle layer disc
Single layer Super Audio CD with only an HD layer.
• The search mode set by pressing [SEARCH MODE] is stored in the
memory until the power is turned off.
[NUMBER
(0~9, +10)]
SUPER AUDIO
CD SETUP
[CLEAR]
[SEARCH
MODE]
[ D H F G]
[ENTER]
[RETURN]
[PAGE +]
eHybrid disc
Two-layer Super Audio CD with an HD layer and a CD layer. The
signals on the CD layer can be played on a regular CD player.
Playing bonus groups
Some DVD-Audio discs contain special groups called “bonus groups”
which can only be played by inputting a password.
In the Stop mode, press [SEARCH MODE] and select
1 the
“GROUP”.
• About the HD layer
All Super Audio CDs contain an HD (High Density) layer with high
density Super Audio CD signals. This layer can contain a stereo
channel area, a multi-channel area, or both a stereo channel and
multi-channel area.
• The ”GROUP” indicator lights.
1
[PAGE –]
wDual layer disc
Super Audio CD with a double HD layer, offering extended
playing time and high sound quality.
2
Types of Super Audio CDs
Use [NUMBER] (0 ~ 9, +10) to input the bonus group
number.
Single layer disc
Dual layer disc
Hybrid disc
[NUMBER] (0 ~ 9) to input the passwords (4
3 Use
digits), then press [ENTER].
• Playback starts from the first track in the specified group.
In some cases the password is input from a menu screen. Follow
the instructions on the screen.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
¢ If you input the wrong password:
Press [CLEAR].
35
ENGLISH
HD layer
HD layer
CD layer
HD layer
ENGLISH
Basic Operation
Basic Operation
Setting the top priority playback layer for Super
Audio CDs
Use this procedure to set the layer to be played when the disc is
loaded.
Press SUPER AUDIO CD SETUP and select the layer.
MULTI (Upon purchase):
The multi-channel area of the HD layer is played.
Playing discs with playback control
On most video CDs with playback control, a menu screen is displayed.
Select the item you want to see then start playback.
Use [NUMBER] (0 ~ 9, +10) to select the item you want to
see.
D H F G] to select the folder you want to play,
[D
2 Use
then press [ENTER].
D H F G] to select the file you want to play, then
[D
3 Use
press [ENTER] or 1.
• Playback starts.
• Playback starts.
Example:
1
1. Opening
STEREO:
The 2-channel area of the HD layer is played.
2. 1st movement
CD:
The CD layer is played.
4. 3rd movement
3. 2nd movement
Example: MP3 screen
5. Ending
2
¢ To return to the menu screen.
Press [RETURN] during playback.
• When playing discs that do not contain the selected area or layer,
the disc is played with the following order of priority: MULTI,
STEREO, CD
3
About discs containing MP3 and WMA format
files
About Video and Music CDs
Tracks:
Video and music CDs are divided into several sections (tracks).
These sections are all allotted numbers, called the track numbers.
For example:
Track 1
Track 2
Track 3
Track 4
Track 5
Playback Control (Video CDs):
With video CDs for which “playback control” or the like is
indicated on the disc or jacket, the desired scene or information
can be selected from menu screens displayed on the TV.
¢ Listening to CDs and
containing MP3 files
CD-R/CD-RW
discs
There are many music distribution sites on the Internet allowing
you to download music files in MP3 or WMA format. When music
files are downloaded from such sites following the instructions
provided at the site then burned onto a CD-R/CD-RW disc, they
can be played on the DVD-2930CI.
¢ Listening to WMA and CD-R/CD-RW discs
containing MP3 files
The DVD-2930CI can play music files stored on CD-R/CD-RW discs
in MP3 or WMA (Windows Media® Audio) format.
“Windows Media” and “Windows” are registered trademarks or
trademarks in the United States and other countries of the
Microsoft Corporation of the United States.
WMA (Windows Media® Audio)
Audio codec of the Microsoft Corporation of the United States.
the disc onto which the music files in MP3 or
1 Load
WMA format have been burned.
36
ENGLISH
Example: WMA screen
2
3
ENGLISH
Basic Operation
Basic Operation
¢ To change the folder to be played:
Press [RETURN], then select the new folder.
1
¢ To change the file to be played:
D H F G] to select the file, then press [ENTER].
Use [D
¢ Playing in random order:
In the stop mode, press [RANDOM], then press [ENTER] or 1.
¢ Playing in repeat order:
Press [REPEAT].
FILE REPEAT
FOLDER REPEAT
OFF
ALL REPEAT
¢ Switching the time display:
Press [DISPLAY] during playback.
Elapsed time per track
(SINGLE ELAPSED)
Remaining time per track
(SINGLE REMAIN)
[DISPLAY]
[D H F G]
[ENTER]
[RETURN]
1
[REPEAT]
[RANDOM]
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
37
ENGLISH
• When writing MP3/WMA files on a CD-R or CD-RW disc, set the
writing software’s format to “ISO9660 Level 1”. The files may not
play properly if they are recorded in other formats. Also note that
with some writing software it is not possible to record in ISO9660
format. For details, refer to the instructions of your writing software.
• The DVD-2930CI is compatible with the “MPEG-1 Audio Layer-3”
MP3 standard (sampling frequency (fs) of 32, 44.1 or 48 kHz).
Not compatible with other formats such as “MPEG-2 Audio Layer3”, “MPEG-2.5 Audio Layer-3”, “MP1”, “MP2”, “MP3 PRO”, etc.
• The DVD-2930CI is compatible with WMA files with sampling
frequencies (fs) of 32, 44.1 or 48 kHz.
• The DVD-2930CI is compatible with MP3 files with bit rates of 32 to
320 kbps, WMA files with bit rates of 64 to 160 kbps.
• Be sure to add the extensions “.MP3” or “.mp3” to MP3 files,
respectively.
Be sure to add the extensions “.WMA” or “.wma” to WMA files,
respectively.
• The DVD-2930CI can play [discs containing] up to 255 folders and
1000 files.
• When playing MP3 or WMA files, the signals are converted to PCM
for output from the digital output terminals.
• The DVD-2930CI can display folder and file names like titles. Up to
11 characters (letters of the English alphabet, numbers and the “_”
(underscore) sign) are displayed. Characters that cannot be
displayed are indicated by an “✽” (asterisk).
• Copyright-protected files cannot be played.
Note that depending on the software used for burning and other
conditions, some files may not play or display correctly.
• The positions of the folders or files may have been changed by the
writing software when burning the MP3/WMA files onto the CDR/CD-RW disc, so the files may not play in the expected order.
• The DVD-2930CI is not compatible with the ID3-Tag function.
• The DVD-2930CI is not compatible with packet-write software.
• The DVD-2930CI is not compatible with playlists.
ENGLISH
Basic Operation
Basic Operation
About discs containing DivX® format files
CD and DVD discs containing digital images recorded in DivX®
format can be played.
DivX®:
A digital video compression technology with DivX® video coding by
DivX Networks Inc.
1 Load a disc containing files in DivX® format.
D H F G] to select the folder you want to play,
[D
2 Use
then press [ENTER].
¢ To change the folder to be played:
In the stop or resume mode, press [RETURN], and select the folder
again.
¢ To change the file to be played:
Use this procedure to play JPEG format files recorded on CD-R/CDRW discs or Picture CDs or Fujicolor CDs as slideshows.
Playing a disc containing files in JPEG format
D H F G] to select the file again.
In the stop or resume mode, use [D
a disc containing still picture files in JPEG
1 Load
format.
¢ Playing in random order:
In the stop mode, press [RANDOM], then press 1.
D H F G] to select the folder you want to play,
[D
2 Use
then press [ENTER].
¢ Playing in repeat order:
Press [REPEAT].
FILE REPEAT
D H F G] to select the file you want to play, then
[D
3 Use
press [ENTER] or 1.
About discs containing still picture files
FOLDER REPEAT
OFF
ALL REPEAT
D H F G] to select the file you want to play, then
[D
3 Use
press 1.
• Playback starts.
• Playback starts.
¢ Switching the time display:
Press [DISPLAY] during playback.
1
Elapsed time per track
(SINGLE ELAPSED)
Remaining time per track
(SINGLE REMAIN)
2
3
• The DVD-2930CI can play [discs containing] up to 255 folders and
1000 files.
• Note that depending on the software used for burning and other
conditions, some files may not play or display correctly.
• The DVD-2930CI is compatible with DivX® audio sampling
frequencies (fs) of 8 to 48 kHz.
• The DVD-2930CI is not compatible with motion compensation
technology (GMC) or PCM Audio.
38
ENGLISH
1
2
ENGLISH
Basic Operation
Basic Operation
Playing Picture CDs and Fujicolor CDs
1
2 9
The DVD-2930CI can play Kodak Picture CDs and Fujifilm Fujicolor
CDs, so you can view the photographs recorded on them on your TV.
Picture CDs and Fujicolor CDs are part of a service for converting
photographs taken on conventional film cameras into digital data
and storing them on a CD.
For details on Picture CDs and Fujicolor CDs, contact a store
offering film development services.
3
8
Load a disc containing the still pictures.
¢ To play an image in the zoom mode:
In the pause mode, press [ZOOM]. (“ZOOM” is displayed on the TV
screen.)
• The magnification changes each time the button is pressed.
150% ➝ 200% ➝ 50% ➝ 100% ➝ 150%
When the still picture is enlarged, press [ENTER] (“MOVE” is
D H F G] to move the
displayed on the TV screen), then use [D
zoomed picture.
Pictures cannot be zoomed in the continuous playback (slideshow)
mode.
Once the disc is loaded, playback starts automatically.
The still pictures are played continuously until 2 is pressed.
¢ To select the still picture to be played:
During playback, press 2 or [MENU] to display all the pictures, then
D H F G] to select the desired picture and press [ENTER].
use [D
¢ Cueing to the desired still picture:
Press 8 or 9 during playback.
8: The previous still picture is displayed.
9: The following still picture is displayed.
¢ Pausing playback:
Press 3.
Press 1 to resume playback.
[D H F G]
[MENU]
2
8
9
[ENTER]
1
3
[ZOOM]
¢ Rotating the still pictures:
D H F G] to rotate the still picture.
In the play or still mode, use [D
D H : The still picture is flipped vertically.
F : The still picture is rotated 90° counterclockwise.
G : The still picture is rotated 90°clockwise.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
39
ENGLISH
• The DVD-2930CI is compatible with picture data recorded in JPEG
format, but it is not guaranteed that all picture data in JPEG format
can be played.
• File sizes of up to 30MB can be played.
• When burning JPEG files onto CD-R/CD-RW discs, do so with the
writing software set to “ISO9660 level 1”.
• Be sure to add the extension “.JPG” or “.JPE” to JPEG files. (JPEG
files written on Macintosh computers cannot be played.)
NOTE:
• Your recordings may be used for your personal enjoyment only,
and may not be used without the consent of the copyright holder
as per copyright laws.
• Do not play music CDs (CD-DA format) or CD-R/CD-RW discs
containing files other than files in MP3, WMA, DivX® or JPEG
format. Attempting to play some files may cause malfunction or
damage.
ENGLISH
Basic Operation
Repeat and random play of MP3, WMA, JPEG
and DivX® files
Convenient operations
Fast-forwarding/Fast-reversing
FOLDER:
Playback starts from the selected file, and the other files in that
folder are played in order.
8
9
During playback, press 6 or 7.
• The fast-forward/fast-backward speed increases each time one of
these buttons is pressed. The speed can be changed in 5 steps.
FOLDER REPEAT:
Playback starts from the selected file, and all the files in that folder
are played repeatedly.
¢ Returning to normal playback:
ALL REPEAT:
Playback starts from the selected file, and all the files on the disc
are played repeatedly.
Press 1.
RANDOM:
Playback starts from the selected file, and the other files in that
folder are played in random order.
6
7
Moving to the beginning
FILE REPEAT:
The selected file is played repeatedly.
During playback, press 8 or 9.
• A number of chapters/tracks equivalent to the number of times the
button is pressed is skipped.
• When pressed once in the backwards direction, playback returns
to the beginning of the currently playing chapter/track.
[NUMBER
(0~9, +10)]
Searching using the NUMBER buttons
[SEARCH MODE]
playback, press [SEARCH MODE] and select the
1 During
setting mode (for DVD-Video and DVD-Audio discs).
7
6
8
9
• For DVD-Video discs
: TITLE
• For DVD-Audio discs
: GROUP
CHAP
TRACK
[NUMBER] (0 ~ 9, +10) to input the number of the
2 Use
chapter/track you want to play.
• The search mode set by pressing [SEARCH MODE] is stored in the
memory until the power is turned off.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
40
ENGLISH
ENGLISH
Convenient operations
Convenient operations
Frame-by-frame playback
(for DVD-Video discs and Video CDs only)
1
2 7
For DVD-Video discs
Normal playback
In the pause mode, press 3.
Indication on
display
• The picture advances one frame each time the button is pressed.
¢ Returning to normal playback:
Chapter played repeatedly
Press 1.
“
”
“
”
“
”
“
”
3 6
TITLE played repeatedly
• For DVD-Audio discs, frame-by-frame playback is only possible with
the video part.
Repeat play stopped
[NUMBER
(0~9, +10)]
[PROGRAM/DIRECT]
[CLEAR]
[CALL]
• The speed of slow playback increases each time one of the
buttons is pressed. The speed can be changed in 5 steps.
For DVD-Audio discs
¢ Returning to normal playback:
[ENTER]
[REPEAT]
[RANDOM]
In the pause mode, press 6 or 7.
Normal playback
[D H]
2
3
Slow playback
Press 1.
1
7
6
[A-B]
Track played repeatedly
• For DVD-Audio discs, slow playback is only possible with the video
part.
• Reverse slow play is not possible with video CDs.
Group played repeatedly
Repeat playback
Repeat play stopped
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
During playback, press [REPEAT].
• Each time the button is pressed, the repeat mode switches and
playback starts in the respective repeat mode.
41
ENGLISH
ENGLISH
Convenient operations
Convenient operations
¢ To clear the entire program
Programmed playback
For Video CDs / Super audio CDs / Music CDs discs
For DVD-Audio discs, video CDs, music CDs and Super Audio CDs,
track numbers can be programmed to play in the desired order.
Programmed playback is not possible with DVD-Video discs.
Normal playback
1 In the stop mode, press [PROGRAM/DIRECT].
Track played repeatedly
• The “PROG” indicator appears on the display.
“
”
Press [PROGRAM/DIRECT].
Playing in random order
For DVD-Audio discs, video CDs, music CDs and Super Audio CDs,
the tracks can played in random order.
Random playback is not possible with DVD-Video discs.
1 In the stop mode, press [RANDOM].
Entire disc repeated
• The “RAND” indicator appears on the display.
“
”
Repeat play stopped
Repeating a section between two specific points
(A-B repeat playback)
2 Use [NUMBER] (0 ~ 9, +10) to input the number to be set.
• Up to 20 tracks can be programmed.
1
Press [A-B] during playback.
• This sets the starting point A.
• The “
2
D H] to select “group number” and
For DVD-Audio discs, use [D
“track number”, then press [ENTER].
” indicator appears on the display.
Press [A-B] again.
3 Press 1.
• Playback starts in the programmed order.
• End point B is set and the A-B section is played repeatedly.
• The “
” indicator appears on the display.
¢ Returning to normal playback:
Press [A-B] until “A TO B CANCELED” appears on the display.
¢ To check the contents of the program:
Press 2 twice to stop the disc.
• The program screen is displayed.
In addition, when [CALL] is pressed while in the stop mode, the
programmed number is shown on the display.
2 Press 1.
• Random playback starts.
For DVD-Audio discs, the group selection screen is displayed.
D H] to select “ALL” or “GROUP number”, then press
Use [D
[ENTER]. (“✽” is displayed next to “group number”.)
All the groups are played in random order when “ALL” is
selected, and only the tracks within that group are played when
“group number” is selected.
¢ Clearing individual tracks from programs:
• For some discs, the repeat play and A-B repeat functions do not
work.
• The repeat play and A-B repeat functions may not work for discs on
which the elapsed playing time is not indicated on the DVD-2930CI’s
display during playback.
• During A-B repeat playback, the subtitles just before or after the AB section may not be displayed.
Video CDs, Super audio CDs and Music CDs:
In the stop mode, press [CLEAR].
• The last track set in the program is deleted each time the button
is pressed.
DVD-Audio:
G], select the track to be
At the program screen, press [G
D H], then press [CLEAR].
programmed using [D
42
ENGLISH
¢ Returning to normal playback:
In the stop mode, press [RANDOM].
• Random playback may not be possible for some discs.
ENGLISH
Convenient operations
Convenient operations
Operating using the on-screen display
For Video CDs / Super audio CDs / Music CDs discs
This function lets you display information about the disc (titles,
chapters, time, etc.) and specify the part you want to play.
[NUMBER
(0~9, +10)]
[CLEAR]
[DISPLAY]
1 Press [DISPLAY] during playback.
• The display on the TV screen switches each time the button is
pressed.
• The items displayed differ from disc to disc.
For DVD-Video discs
[ D H F G]
[ENTER]
[MARKER]
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
For video and music CDs, only the elapsed time switches.
Some Super Audio CDs contain text information. In such cases,
the album titles and artists are also displayed in the stop mode,
and the title of the currently playing track is also displayed in the
play mode.
For Super Audio CDs containing text information, the total
remaining time is displayed twice.
The second time, the text information is shown on the DVD2930CI’s display.
It may not be possible to display the disc information either for
discs on which the elapsed playing time is not indicated on the
DVD-2930CI’s display during playback.
For DVD-Audio discs
2 Use [DD H F G] to select the item you want to change.
• The selected item is displayed in a yellow frame.
43
ENGLISH
ENGLISH
Convenient operations
¢ Specifying the elapsed time
Use [NUMBER] (0 ~ 9, +10) to input the time, then press
[ENTER].
• Playback starts from the specified point.
For some discs it is not possible to specify the time.
Convenient operations
Marking scenes you want to see again later
Scenes you want to see again later can be marked so you can play
them any time.
F G] to select the mark number, then press
Use [F
[ENTER].
• Playback starts from the marked scene.
Adding marks
For DVD-Video discs:
Example: To specify 1h32m47s
Press [0] / [1] / [3] / [2] / [4] / [7] / [ENTER].
1 Press [MARKER] during playback.
For Video CDs / Music CDs discs:
Example: To specify 1m26s
Press [0] / [1] / [2] / [6] / [ENTER].
F G] to select the marker, then press [ENTER] at
[F
2 Use
the point you want to mark.
•“
” is displayed if there is no mark.
• A number is displayed.
• Up to 8 parts can be marked.
For Super audio CDs:
Example: To specify 1h32m47s (92m47s)
Press [0] / [9] / [2] / [4] / [7] / [ENTER].
¢ To turn off the marker screen:
Press [MARKER].
¢ Clearing the selected mark number:
1
¢ Specifying groups, titles, tracks or chapters
Calling out marked scenes
F G] to select the mark number, then press [CLEAR].
Use [F
• “
” is displayed.
2
Use [NUMBER] (0 ~ 9, +10) to input the number, then
press [ENTER]. (For DVD discs)
Use [NUMBER] (0 ~ 9, +10) to input the number.
(For Video CDs / Music CDs / Super Audio CDs discs)
• Depending on where the mark is placed, the subtitles may not be
displayed.
• The marks are stored in the memory until the power is turned off or
the disc is removed from the player.
• Playback starts from the specified point.
For some discs it is not possible to specify the time.
44
ENGLISH
ENGLISH
Convenient operations
Convenient operations
Zoomed play
<1> <9>
Setting the video format
1 Press [ZOOM] while in the play or pause mode.
Set this according to the video format of the connected TV.
• The magnification changes each time the button is pressed.
Press [NTSC/PAL].
For DVD-Video / video-CD :
NTSC
X 2.0
X 3.0
PAL
MULTI
X 1.0
For DivX®:
X 1.0
X 1.5
X 2.0
JUST
• The picture will not be displayed properly if a video format different
from the connected TV’s type is set.
2 Press [DD H F G].
• The zoomed picture moves.
[NTSC/PAL]
• Zooming may not operate properly for certain scenes.
• The quality may be lower and the picture may be shaky when it is
zoomed.
• Zoomed play may not work properly for some discs.
• Zoomed play is not possible at the top menu or other menu screens.
[D H F G]
[DIMMER]
[ZOOM]
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
45
ENGLISH
Adjusting the brightness of the display
Use this procedure to adjust the brightness of the DVD-2930CI’s
display.
The brightness can be switched in 3 steps. The display can also be
turned off.
Press [DIMMER].
• The brightness switches each time the button is pressed.
ENGLISH
Others
Others
About the DENON LINK function
DENON LINK is a balanced transfer type digital link using high speed
transfer elements. Connecting the DENON LINK terminal to a DENON
AV amplifier equipped with a special terminal using a special cable
enables high speed, high quality transfer of digital audio signals with
little loss of signal quality, resulting in high quality sound production.
DENON LINK is an exclusive DENON digital interface, allowing digital
transfer of the 2 channels of 192 kHz/24 bit digital signals of DVDAudio discs and of PCM multi-channel signals. In addition, DENON
LINK 3rd Edition allows for full specification digital transfer of the
audio contents of Super Audio CDs.
The “DENON LINK” indicator lights on the display during DENON
LINK processing.
AL24 Processing Plus
AL24 Processing Plus is an analog waveform reproduction technology
compatible even with the high bit rates and high sampling rates of
next generation media.
AL24 Processing Plus conducts digital data interpolation based on the
digital data that is input to achieve analog waveforms near those the
sounds must have had in the natural environment. The sound is
reproduced with 24-bit quality, increasing the music reproducing
performance when the volume is low and achieving reverberations
that seem to suck you into the concert hall. AL24 Processing Plus is
provided for not only the front left and right channels but also the
surround left and right, center and subwoofer channels.
The “AL24 PLUS” indicator lights on the display during AL24
Processing Plus processing.
Copyright protection technology
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision , and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Resetting
If the display is abnormal or the main unit or remote control unit do
not function, reset the DVD-2930CI using the procedure described
below.
the stop mode,
1 Insimultaneously.
press <1 > and <9 >
that the “INITIALIZE” indicator turns off
2 Check
from the TV screen, then release the buttons.
• This completes the resetting procedure.
• If the resetting procedure is not completed, start over from step 1.
46
ENGLISH
Registered trademarks
The DVD-2930CI is manufactured using the technologies listed below
(in random order).
• “NSV” is a trademark of Analog Devices, Inc.
• “HDMI, the HDMI long and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.”
®, HDCD®, High Definition Compatible Digital® and
•“
Microsoft® are either registered trademarks or trademarks of
Microsoft Corporation, Inc. in the United States and/or other
countries. HDCD system manufactured under license from
Microsoft Corporation, Inc. This product is covered by one or more
of the following: In the USA: 5,479,168, 5,638,074, 5,640,161,
5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in
Australia: 669114. Other patents pending.
• Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and ”DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc.
• “KODAK” is a trademark of Eastman Kodak Company.
• “FUJICOLOR CD” is a trademark of Fuji Photo Film Co, Ltd.
• “Windows Media™”, “Windows®”are a trademarks of Microsoft
Corporation, Inc.
• DivX, DivX Certified, and associated logos are trademarks of DivX,
Inc. and are used under licence.
ENGLISH
Others
Others
Symptom
Check
Page
• The angle cannot be switched unless the DVD contains more than one
angle.
In some cases, multiple angles are only provided for specific scenes.
34
Playback does not start when
a title is selected.
• Check the “Viewing restriction level” setting.
25
You have forgotten the
password set for restricting
viewing. Reset all the initial
setting values to the values
set upon purchase.
• Use the following procedure to reset all the initial setting values to the
values set upon purchase. Use the following procedure to reset all the
initial setting values to the values set upon purchase.
In the stop mode, press the 1 and 9 buttons simultaneously.
(Check that the “INITIALIZE” indicator turns off from the TV screen.)
46
The audio or subtitle language • The selected language is not set if the DVD does not contain sound or
is not the language set in the
subtitles in that language.
initial settings.
16
Troubleshooting
If a problem should arise, first check the following:
1. Are all the connections correct ?
2. Is the set being operated as described in the Operating Instructions ?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
Symptom
Check
Page
Power does not turn on.
• Plug the power supply cord into the power outlet.
12
Playback does not start even
when the 1 button is
pressed, or starts but stops
immediately.
• Condensation? (Let sit 1 or 2 hours)
• You are attempting to play a disc other than one with one of the marks on
page 3.
• Wipe the dirt off the disc or replace the disc.
3, 4
3
Picture does not appear.
• Check the connections.
• Check whether “VIDEO OUT” in the pure direct settings is set to “OFF”
or “ALL OFF”.
• Set the TV’s input to “video”.
9 ~ 12
28
•
•
•
•
9 ~ 12
—
23
10, 11
No sound is heard or the
sound is hard to hear.
Check the connections.
Set the proper inputs (TV, stereo, etc.).
Check the “DIGITAL OUTPUT” and “COMPRESSION” settings.
Digital signals are not output for Super Audio CDs. Use analog or DENON
LINK 3rd connections.
• No audio signals are output from the HDMI terminal if “VIDEO OUT” or
“DIGITAL OUTPUT” in the pure direct settings is set to “OFF” or “ALL
OFF”.
• When HDMI connections are made with a device not compatible with
HDMI Ver. 1.1, the audio signals of DVD-Audio discs that are copyright
protected with CPPM are not output.
The angle cannot be
switched.
4
The picture is not displayed in
4:3 (16:9) aspect ratio.
—
Menu screen messages are
not displayed in the desired
language.
Picture does not appear with
HDMI connections.
28
12
Menu playback does not work • Menu playback only works for video CDs with playback control.
for video CDs.
36
Picture is disturbed when
fast-forwarded or fastreversed.
• The picture may be somewhat disturbed. This is normal.
—
Buttons do not operate.
• Some discs may prohibit certain operations.
32
Subtitles are not displayed.
• Subtitles cannot be displayed for DVDs that do not contain subtitles.
• The subtitles are set to “off”. Set the subtitles.
—
16
• The language cannot be switched unless the disc contains more than one
language.
• With some discs, the audio (or subtitle) language is switched not as
described in this manual but by using the DVD menu screen, etc.
—
The audio (or subtitle)
language cannot be switched.
The set cannot be operated
with the remote control unit.
34
47
ENGLISH
• Set the “TV ASPECT” and “SQUEEZE MODE” items properly in function
of your TV.
20, 21
• Check the “DISC MENUS” setting at “LANGUAGE SETUP” in the initial
settings.
16
• Check the HDMI connections. (Check the lighting conditions of HDMIrelated indicators.)
• Check whether the compatible input formats of the connected monitor
device match the DVD-2930CI’s input format (HDMI FORMAT).
• Check whether “VIDEO OUT” in the pure direct settings is set to “OFF”
or “ALL OFF”.
11, 12
•
•
•
•
•
Insert the batteries in the proper direction, checking the < and > marks.
Replace the batteries with new ones.
Point at the remote control sensor when operating.
Operate within a distance of 7 meters from the remote control sensor.
Remove the obstacle.
11, 12
28
5
5
5
5
—
ENGLISH
Others
Specifications
¢ Audio performance
Signal format:
Applicable discs:
S-Video output:
Video output:
Component video output:
HDMI output:
Analog audio output:
Audio output characteristics:
Digital audio output:
NTSC / PAL
(1) DVD-Audio / DVD-Video discs
12 cm 1 side 1 layer, 12 cm 1 side 2 layers / 12 cm 2 sides 2 layers (1 side 1 layer)
08 cm 1 side 1 layer, 08 cm 1 side 2 layers / 08 cm 2 sides 2 layers (1 side 1 layer)
(2) Super Audio CDs
12 cm 1 layer / 12 cm 2 layer / 12 cm Hybrid
(3) Compact Disc (CD-DA / VIDEO CD) : 12 cm / 8 cm disc
Y output level : 1Vp-p (75 Ω/ohms) / C output level : 0.286 Vp-p
Output terminal : S-Video, 1 set
Output level : 1Vp-p (75 Ω/ohms) / Output terminal : Pin-jack, 1 set
Y output level : 1Vp-p (75 Ω/ohms)
PB/CB output level / PR/CR output level : 0.648 Vp-p (75 Ω/ohms)
Output terminal : Pin-jack, 1 set
Output terminal : 19-pin HDMI terminal, 1 set
Output level : 2 Vrms (10 kΩ/kohms)
2 channels (L/R) output terminal : Pin-jack, 1 set
Multi channels (FL/FR/C/SL/SR/SW) : Pin-jack, 1 set
(1) Frequency response
q DVD (linear PCM)
: 2 Hz ~ 22 kHz (48 kHz Sampling)
: 2 Hz ~ 44 kHz (96 kHz Sampling)
: 2 Hz ~ 88 kHz (192 kHz Sampling)
w Super audio CD
: 2 Hz ~ 100 kHz
e CD
: 2 Hz ~ 20 kHz
(2) S/N
: 118 dB
(3) Harmonic distortion : 0.001 %
(4) Dynamic range
: 106 dB
Output level : Optical output terminal, 1 set / Coaxial output terminal, 1 set
Output level : DENON LINK output terminal, 1 set
¢ General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
AC 120 V, 60 Hz
45 W (In the standby mode : Approx. 1W)
434 (W) x 102 (H) x 386 (D) mm (17-3/32” x 4-1/64” x 15-3/16”)
(including protruding parts)
7.6 kg (16.8 lbs.)
¢ Remote control unit (RC-1037)
Remote control type:
Batteries:
External dimensions:
Mass:
Infrared pulse
R6P/AA Type (two batteries)
58 (W) x 230 (H) x35 (D) mm (2-9/32” x 9-3/64” x 1-3/8”)
190 g (0.42 lbs.) (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
48
ENGLISH
TOKYO, JAPAN
www.denon.com
Denon Brand Company, D&M Holdings Inc.
Printed in China 00D 511 4451 003
Download PDF

advertising