Denon DVD-755 DVD Player User Manual

E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 1
DVD VIDEO PLAYER
DVD-1910/DVD-755
OPERATING INSTRUCTIONS
MODE D’EMPLOI
INSTRUCCIONES DE OPERACION
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
PRECAUTIONS
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
Nonuse periods - Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is
not to be used for a long time. Unplug the unit during lightning storms.
Please read this operating instructions carefully before using your DVD video player, and keep it for future
reference.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
¡ Keep the set away from moisture water and dust.
¡ Never disassemble or modify the set in any way.
¡ Do not put heavy objects on the AC power cord.
¡ Keep the AC power cord away from heat appliances.
¡ Once the AC power cord is damaged be sure to replace with a new one.
–2–
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 3
1) Read Instructions - All the safety and operating
instructions should be read before the product is
operated.
2) Retain Instructions - The safety and operating instructions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
8) Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product
may fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
PORTABLE CART WARNING
of the product should follow the
(Symbol provided by RETAC)
manufacturer’s instructions, and
should use a mounting accessory recommended by the manufacturer.
9) A product and cart combination
should be moved with care.
Quick stops, excessive force, and
S3125A
uneven surfaces may cause the
product and cart combination to overturn.
10) Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered.
The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.
11) Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
12) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is
a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13) Power-Cord Protection - Power-supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the point where they exit
from the product.
14) Lightning - For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the product
due to lightning and power-line surges.
15) Power lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as contact with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the product.
18) Servicing - Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation,
e) If the product has been dropped or damaged in
any way.
f) When the product exhibits a distinct change in performance - this indicates a need for service.
20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
–3–
EN
English
Important Safeguards
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 4
TABLE OF CONTENTS
■ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . 3
■ INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for the progressive scan outputs . . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the remote control . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Displays During Operation . . . . . . . . . . . . . . . . . . . . . . 10
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 10
■ CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Description - rear panel . . . . . . . . . . . . . . . . . . . . . . . . 11
Connection to an audio system . . . . . . . . . . . . . . . . . . 12
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 13
Connection to a TV with an HDCP-compatible
DVI-D port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
■ PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DVI Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Still / Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CALLING UP A MENU SCREEN DURING
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 16
Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 16
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 16
■
■
■
■
–4–
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . .
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . .
REPEAT TRACK / GROUP / ALL . . . . . . . . . . . . . . .
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program Playback (CD) . . . . . . . . . . . . . . . . . . . . . . . .
Random Playback (CD) . . . . . . . . . . . . . . . . . . . . . . . .
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . .
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . .
Program Playback (MP3/JPEG/WMA) . . . . . . . . . . . . .
Random Playback (MP3/JPEG/WMA) . . . . . . . . . . . . .
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . .
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the On-Screen Display . . . . . . . . . . . . . . . . .
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . .
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dialog Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ratings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RATING LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . .
CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . .
Returning all selections of SETUP(except for
RATINGS) to their default settings . . . . . . . . . . . . . . . .
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
17
17
17
17
17
17
18
18
18
18
20
20
20
20
21
21
21
21
22
22
22
22
22
23
23
23
24
24
24
24
24
24
25
26
27
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 5
The serial number of this product may be found on the back of the DVD player. No others have the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Apparatus Claims of U. S. Patent Nos, 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited
viewing uses only.
Notice for the progressive scan outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of 525/480 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding
our TV set compatibility with this model 525p/480p DVD player, please contact our customer service center.
Supplied Accessories
Please check to make sure the following items are included with the main unit in the carton.
••
Service Station Warranty
1 List • • • • • • • • • 1 Card • • • • • • • • 1
+1
0
MEN
U
TOP
AUD
IO
0
DISP
LAY
8
MOD
E
SET
UP
ENT
ER
STO
P
STIL
L/
PAU
SE
PLA
Y
SKIP
RET
URN
MEN
U
ANG
LE
ZOO
M
SUB
TITL
E
CLE
AR
7
REP
EAT
4
A-B
REP
EAT
1
5
9
POW
ER
2
6
VIRT
UAL
3
SEA
MOD RCH
E
OPE
CLO
N
SE
/
Remote
Operating
Video
“AA” (R6P) Audio
control • • • • • • 1 batteries • • • • 2 cable • • • • • • • 1 cable • • • • • • • • 1 Instruction
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual, with the following meanings.
DVD-V :
Description refers to playback of DVD-Video discs. (including DVD-R/RW discs)
CD
:
Description refers to playback of Audio CDs.
MP3
:
Description refers to playback of discs formatted with MP3.
JPEG
:
Description refers to viewing of JPEG discs.
WMA
:
Description refers to playback of discs formatted with WMA.
–5–
EN
English
INTRODUCTION
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 6
ABOUT THE DISCS
¡On the following disc, the sound MAY NOT be
Playable Discs
heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD
layer can be delivered. The sound recorded
on the high density Super Audio CD layer
cannot be delivered.
¡Any other discs without compatibility indications.
The following discs can be played back on this
DVD player.
Usable
discs
Mark (logo)
Recorded
signals
Disc Size
DVD-Video
12 cm
(NOTE 1)
DVD-R
DVD-RW
(NOTE 2,3)
CD
CD-R
CD-RW
(NOTE 4)
Disc Types
Digital video
(MPEG2)
[DVD-Video]
8 cm
Digital audio
MP3
WMA (NOTE 5)
Digital picture
(JPEG)
Data on a DVD is divided into sections called “titles,” and
then into subsections called “chapters,” each of which is
given a title or chapter number. Playback conditions are
preset on some DVD-Video discs, and these playback
conditions take priority over user operations on this player.
If a function you selected does not run as desired, refer to
the manual accompanying the disc.
12 cm
8 cm
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
Picture CD
JPEG
12 cm
NOTE 1: Some DVD-Video discs do not operate as described in this
manual due to the intentions of the discs’ producers.
NOTE 2: Discs that have not be finalized cannot be played.
Depending on the disc’s recording status, the disc may not
be accepted or may not be played normally (the picture or
sound may be not be smooth, etc.).
NOTE 3: Some DVD-R/DVD-RW discs may not be played in this
player.
NOTE 4: Some of CD-R/CD-RW discs may be incompartible
because of “scratch and stain of disc”, “Recording
condition”, and “Characteristic of Recorder”.
NOTE 5:
Windows Media and the Windows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This player conforms to the NTSC color system. You
cannot play discs recorded in other color systems such
as PAL.
¡Some discs include region codes as shown below.
[Audio CD]
Data on an Audio CD is divided into sections called “tracks,”
each of which is given a track number.
Example
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
[MP3, JPEG, WMA]
Data on an MP3, JPEG or WMA are divided into sections
called “groups” and then into subsections called “tracks,”
each of which is given a group or track number.
Example
Track 1
Group 1
Track 2
Track 3
Group 2
Track 4
Track 5
Track 6
¡The number inside the symbol refers to a region of
the world, and a disc encoded in a specific region format can only be played back on DVD players with the
same region code.
¡On the following discs, only the sound can be
heard (picture cannot be viewed).
CDV
CD-G
¡NEVER play back the following discs. Otherwise,
malfunction may result!
DVD-Audio
DVD-RAM
CD-I
Photo CD
Video CD
DVD with region codes other than 1 or ALL
DVD-ROM for personal computers
CD-ROM for personal computers
CAUTION:
¡Use caution not to pinch your finger in the disc slot.
¡Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the DVD player.
–6–
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 7
FEATURES
¡On-screen display
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional (525i/480i) television signals.
¡Dolby Digital Sound
Information about the current operation can be
displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the
TV screen using the remote control.
¡Dimmer
By hooking this player up to a Multi - Channel Dolby
Digital decoder, you can enjoy high-quality Dolby Digital
5.1 channel surround sound as heard in the movie theaters.
The brightness of the display can be varied.
¡Screen Saver
The screen saver program starts if there is no activity at
the player or its remote for more than 5 minutes. The
brightness of the display is darken by 75%. The program
is disactivated when there is any activity.
¡DTS (Digital Theater System)
When this player is connected to the DTS decoder, you
can enjoy 5.1channel surround system which reproduces
the original sound as truthfully as possible. 5.1 channel
surround system is developed by the Digital Theater
System, Inc.
¡DVI (Digital Visual Interface)
¡Picture Control
Picture Control adjusts among Brightness, Contrast,
Color, Gamma Correction and Sharpness of the specific
display.
¡Search
You can enjoy clearer video output when connected to a
display with an HDCP-compatible DVI-D port.
Chapter search: Search for the chapter designated by
user is possible.
Title search:
Search for the title designated by user is
possible.
Track search: Search for the track designated by user is
possible.
Time search: Search for the time designated by user is
possible.
¡Dialog Speed
Playback in slightly faster or slower speed while keeping
the sound quality as in the normal playback.
Dialog speed is available only on discs recorded in the
Dolby Digital format.
¡Still/fast/slow/step playback
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
¡Repeat
Chapter:
¡Still Mode
Title:
The resolution of pictures while in the still (pause) mode is
adjusted.
Track:
¡Random playback for audio CD, MP3, JPEG, and
WMA
All:
This player can shuffle the order of tracks to play them in
random order.
A-B:
¡Program playback for audio CD, MP3, JPEG, and
WMA
Group:
You can program the order of tracks to play them in a
desired order.
Repeated playback of the chapter of the
disc being played is possible.
Repeated playback of the title of the disc
being played is possible.
Repeated playback of the track of the
disc being played is possible.
Repeated playback is possible.
(exclude DVD-Video)
The part between A and B designated by
user is possible.
Repeated playback of the folder of the
MP3/JPEG/WMA disc being played is
possible.
¡Zoom
2-time or 4-time magnified screen can be displayed.
¡Marker
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto Power Off
The part designated by user can be called back.
The power turns off automatically if there is no activity at
the player or its remote for more than 35 minutes. (Refer
to page 23.)
¡Resume Play
User can resume playback from the point at which the
play has been stopped even if the power is turned off.
¡Subtitles in a desired language
You can select a desired language for a subtitle if that language is available on a disc.
¡Component Video Out Jacks
Jacks located on the back of the DVD Player which are
used to send high-quality video to a TV via Component
Video In Jacks.
¡Selecting a camera angle
You can select the desired camera angle if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound
mode if different languages and modes are available on a
disc.
¡Ratings Control (Parental lock)
¡Bit rate indication
¡DRC (Dynamic Range Control)
You can control the range of sound volume.
¡Displaying a JPEG picture
Kodak Picture CDs can be played. Still images stored in
JPEG format on CD-R/RW can also be played.
¡Reproducing WMA data
You can set the control level to limit playback of discs
which may not be suitable for children.
You can enjoy WMA files which are recorded on CD-R/RW.
¡Automatic detection of discs
This player automatically detects if a loaded disc is DVDVideo, Audio CD, MP3, JPEG, or WMA.
“Kodak Picture CD COMPATIBLE” is a trademark
of Eastman Kodak Company.
¡Playing an MP3 disc
You can enjoy MP3 files which are recorded on CD-R/RW.
¡Direct Search
You can search the desired title, chapter, and track with
numeric button during playback or in stop mode.
–7–
“WMA” (Windows Media Audio) is a new audio
codec developed by Microsoft® in the United
States of America.
EN
English
¡Progressive Scan system
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 8
FUNCTIONAL OVERVIEW
FRONT PANEL
1
2
31
3
14
4 6 12 11
5
13 24
23
REMOTE CONTROL
30
1
3
15
16
17
18
1.
2.
3.
4.
5.
6.
7.
29
28
8.
9.
10.
11.
19
20
8
10
27
26
25
7
21
9
12.
13.
14.
15.
16.
17.
18.
19.
20.
12
22
6
11
4
23
24
5
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
ON/STANDBY (POWER ON/OFF) Buttons [page 15]
Disc loading tray
OPEN/CLOSE Button [page 15]
PLAY Button [page 15]
STILL/PAUSE Button [page 15]
STOP Button [page 15]
Cursor Buttons [page 15]
Use when making settings while watching the display on
a TV screen.
MENU Button [page 15]
SETUP Button [page 23]
ENTER Button [page 15]
G (SKIP UP) Button [page 17]
Plays back from the beginning of the next chapter or
track.
H (SKIP DOWN) Button [page 17]
Plays back from the beginning of the current chapter or
track.
DVI Button [page 15]
Press set the DVI connector’s video signal output mode.
Display, Remote Sensor Window
A-B REPEAT Button [page 18]
REPEAT Button [page 17]
RANDOM Button [pages 18, 20]
ZOOM Button [page 16]
CLEAR Button [page 17]
ANGLE Button [page 21]
Press to change the camera angle and see the same
sequence being played back from a different angle.
RETURN Button [page 16]
SEARCH MODE Button [page 17]
h (Fast Reverse SEARCH) Button [page 16]
g (Fast Forward SEARCH) Button [page 16]
SUBTITLE Button [page 21]
Press to select a desired subtitle language.
TOP MENU Button [page 15]
DISPLAY Button [page 20]
AUDIO Button [page 21]
Press to select a desired audio language or sound mode.
Numeric Buttons [page 17]
MODE Button [page 18, 20]
DVI indicator [page 15]
Lights when there is video signal output from the DVI-D
OUT jack.
The buttons with circled numbers can only be
operated with the remote control.
–8–
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 9
FUNCTIONAL OVERVIEW
Tour of the remote control
DVD
CD/MP3/JPEG/WMA
POWER
· Press this to switch the power between on and standby.
A-B REPEAT Button
· Marks a segment between A and B for repeated
· Press this to switch the power between on and
standby.
· Marks a segment between A and B for repeated
playback (CD).
playback.
REPEAT Button
· Allows you to repeat playback of a Title or Chapter.
RANDOM Button
MODE Button
ZOOM Button
ANGLE Button
SUBTITLE Button
AUDIO Button
DISPLAY Button
English
Buttons on remote control work in different ways for DVD, CD, MP3, JPEG, and WMA : Refer to the following table for correct use.
· Allows you to repeat playback of a Track or Disc (CD).
· Allows you to repeat playback of a Track, Group, or
Disc (MP3, JPEG, WMA).
· Allows you to play tracks in random order.
·
·
·
·
To set Picture Control.
To set Black Level on/off.
To activate the 3D sound (Virtual surround system).
To set Dialog Speed.
· Allows you to program a specific order or playback
in random order.
· To activate the 3D sound (Virtual surround system)
(CD, MP3, WMA).
· To magnify part of the picture (x2) (JPEG).
· To magnify part of the picture (x2/x4).
· Accesses various camera angles on the disc.
· Accesses various subtitles on the disc.
· Accesses various audio functions on the disc.
· To select STEREO, L-CH or R-CH (CD).
· Displays the current disc mode.
· Displays the current disc mode.
SEARCH MODE Button · To search for a chapter, title, time or marker.
· To rapidly return to a location on the disc.
· To search for a track.
· To search for time or a marker (CD).
· To rapidly return to a location on the disc.
OPEN/CLOSE Button
· To open or close the disc tray.
· To open or close the disc tray.
· To select a chapter or title directly.
· To select a track directly.
· Clear the markers.
· Clear the numbers entered incorrectly.
· To cancel the A point for A-B Repeat.
·
·
·
·
· To call up the Menu on a disc.
· To call up the FILE LIST (MP3, JPEG, WMA).
Numeric Buttons
CLEAR Button
MENU Button
TOP MENU Button
Clear the markers (CD).
Removes status number in program input.
Clear the numbers entered incorrectly.
To cancel the A point for A-B Repeat (CD).
· To return to the first item in the highest hierarchy
· To call up the Top Menu on a disc.
of the FILE LIST (MP3, JPEG, WMA).
ENTER, Cursor Buttons
RETURN Button
· Moves the cursor and determines its position.
· Moves the cursor and determines its position.
· To return to the previous operation in the DVD setup
· To return to the previous operation in the DVD
menu.
setup menu.
SETUP Button
SKIP Buttons
SEARCH Buttons
· To call up the DVD player’s Setup menu.
· To call up the DVD player’s Setup menu.
· To skip Chapters.
· To skip Tracks.
· Allows you to search forward/backward through a disc.
· To begin fast forward/reverse search or slow forward/
· Allows you to search forward/backward through
slow reverse.
a disc (CD, MP3, WMA).
· To begin fast forward/reverse search (CD, MP3, WMA).
STOP Button
PLAY Button
STILL/PAUSE Button
· To stop playback.
· To stop playback.
· To begin disc play.
· To begin disc play.
· To pause disc play.
· Advances playback one frame at a time.
· To pause disc play.
–9–
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 10
FUNCTIONAL OVERVIEW
Front panel display
Lights up when the
A-B repeat function is on.
Lights up when the
repeat function is on.
Lights up when the ALL
repeat function is on.
Lights up when the
progressive scan
system is activated.
P.SCAN
Lights up when the
inserted disc comes
to a pause.
Displays a type of the disc
which is inserted on the tray.
• DVD: DVD
• CD: Audio CD, MP3, JPEG, WMA
Displays the elapsed time of the title
or track. The number of a new title,
chapter, or track is displayed when
a chapter or track is switched.
Selected DVI output mode is displayed.
Lights up when playing back
in slow mode. (DVD)
Lights up when the inserted
disc is being played back.
Displays During Operation
Loading the Batteries
1. Open the battery compartment cover.
Power on
No disc inserted or
cannot read
2. Insert two “AA” (R6P) batteries, with
each one oriented correctly.
Tray open
3. Close the cover.
Tray closed
Cautions On Batteries
Loading the Disc
Power off
DVI output mode (480p)
is selected
DVI output mode (720p)
is selected
DVI output mode (1080i)
is selected
DVI output mode (OFF)
is selected
• Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less then a year has passed.
• The included batteries are only for verifying operation.
Replace it with a new battery as soon as possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
and
marks
in the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries such
as alkaline and manganese.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
– 10 –
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 11
CONNECTIONS
English
Description - rear panel
1
2
3
4
5
6
7
1. DIGITAL OUT Jacks
Use either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control center).
2. AUDIO OUT Jacks
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.
3. VIDEO OUT Jack
Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV, wide screen TV, or Stereo system.
4. COMPONENT VIDEO OUT Jacks
Use these jacks if you have a TV with Component Video in jacks. These jacks provide CR/PR, CB/PB and Y video. Along
with S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT Jack
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher
quality picture.
6. DVI-D OUT (HDCP) Jack
Use a DVI-D connection cable (commercially available) to connect to a display with an HDCP-compatible DVI-D port.
7. REMOTE CONTROL IN/OUT Jacks
Connecting the DENON Satellite Remote Control to these jacks enables you to operate more than one DENON components with one remote control.
When using the DENON Satellite Remote Control,
1. Connect the DENON Satellite Remote Control to the REMOTE CONTROL IN jack of this player. This allows you to operate this player with the Satellite Remote Control.
2. Connect another DENON component to the REMOTE CONTROL OUT jack of this player. This allows you to operate this
player and the connected component with the same Satellite Remote Control.
NOTE:
• When there is video output from the DVI-D OUT jack, no signal is output from the COMPONENT VIDEO OUT jacks.
Selecting Progressive Scan (525p/480p or Interlaced 525i/480i) Playback
¡If your TV is compatible with progressive scanning (525p/480p), connect the TV to the Component Video jacks of the DVD
player and set “PROGRESSIVE” to “ON” in the display setting. Next, set your TV to the progressive scan mode.
Refer to page 23 for instructions on changing the display setting.
¡If your TV is not compatible with progressive scanning, set “PROGRESSIVE” to “OFF”.
¡Use a commercially available adaptor if the video input jacks of your TV or monitor is the BNC type.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (525i/480i) television signals.
The DCDi (Directional Correlational De-interlacing) system of this DVD player produces smooth and
natural video images, even if really dynamic, by eliminating the jagged edges. *“DCDi” is a trademark
of Faroudja, a division of Genesis Microchip Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems,Inc.
– 11 –
EN
E59E0/E5UD(EN).qx3
04.7.16 3:36 PM
Page 12
CONNECTIONS
The following show examples of connections commonly used to connect the DVD player to TV and other
components.
If using this DVD player to playback a DVD in a Dolby Digital 5.1 channel surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience
with powerful and high-quality surround sound of a professional standard which can be heard in movie theaters.
Use a commercially available audio optical or coaxial digital cable (not included) for the audio connections.
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Connection to an audio system
Method 1
Method 2
AV amplifier with a built in decoder
(AV control center),
Dolby Digital decoder,
DTS decoder,
MD deck or DAT deck
Stereo system
AUDIO
Digital Audio Input
Jacks
Audio Input Jacks
(supplied)
DVD
(commercially
available)
Analog Audio Out
(commercially
available)
Digital Audio Out
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + AV amplifier with a built in decoder (AV control center), Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
NOTES (for Method 2 only):
• When using an AV amplifier with a built in decoder (AV control center), Dolby Digital, or DTS decoder as shown in the
Method 2, set “DOLBY DIGITAL” or “DTS” to “ON” accordingly for audio output in the setup mode (refer to page 24). Set it to
“OFF” for the decoder that is not used currently. Playing a DVD using incorrect settings may generate noise distortion, and
may also damage the speakers.
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
• Set “DOLBY DIGITAL” or “DTS” to “OFF” for audio output in the setup mode for connecting to an MD deck or DAT deck (refer to
page 24).
• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
• When playing a copyright-protected 96 kHz linear PCM DVD, the digital sound will be down sampled at 48 kHz, even if you set
“LPCM SELECT” to “OFF”.
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 15 cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
– 12 –
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 13
CONNECTIONS
Basic
Audio
Method 1
Good
picture
Method 2
Better
picture
English
Connection to a TV (for video)
Method 3
Best picture
COMPONENT
VIDEO IN
TV
R
L
Audio
Cable
(supplied)
CR/PR
S-VIDEO IN
VIDEO IN
Video
Cable
(supplied)
S-Video
Cable
(commercially
available)
Y
CB/PB
Component
Video
Cable
(commercially
available)
DVD
Analog
Audio Out
Video Out
S-Video Out
Component Video Out
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
NOTES:
• Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
• S-Video output connector
The video signals are divided into colour (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output connector using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE:
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
– 13 –
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 14
CONNECTIONS
Connection to a TV with an HDCP-compatible DVI-D port
Digital video signals can be delivered by connecting a DVI*-D cable from a display with an HDCP-compatible
DVI-D port.
To DVI-D Input
Connector
24-pin DVI-D cable
(commercially available)
A display with an HDCP-compatible DVI-D port
• When using an HDCP-incompatible display, the image will not be viewed properly.
• Make the audio connections as well because no audio signal is available from the DVI-D jack.
• The 24-pin and 29-pin DVI-D cables are commercially available. Only the 24-pin DVI-D cable can be used
with this player.
Copyright protection system
To play the digital video images of a DVD via a DVI-D connection, it is necessary that both the player and the display (or an
AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content Protection System).
HDCP is copy protection technology that comprises data encryption and authentication of the connected AV equipment.
This player supports HDCP. Please operating instructions for your display (or AV amplifier) for more information.
*DVI: Digital Visual Interface
– 14 –
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 15
PLAYING A DISC
DVD-V
CD
Still / Pause
MP3
JPEG
WMA
Getting started
• Turn on the power of the TV, amplifier and any other components which are connected to the DVD player.
• Make sure the TV and audio receiver (commercially available) are set to the correct channel.
1 Press the POWER ON/OFF button.
• “P-ON” will appear briefly on the display panel.
2 Press the OPEN/CLOSE button
to open disc loading tray.
DVD-V
CD
MP3
JPEG
WMA
1 During playback, press the
STILL/PAUSE button.
F
• Playback will pause and sound
will be muted.
2 To continue playback, press
the PLAY button.
NOTE:
• Set “STILL MODE” to “FIELD” on the display menu if pictures in the pause mode are blurred. (Refer to page 23.)
3 Place the disc in the tray, with the
label facing up.
4 Press the PLAY button.
• The tray will close automatically,
then playback will start from the first
chapter or track of the disc. If the playback does not
start automatically, press the PLAY button.
• When you playback the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title menu”.
5 Press the STOP button to stop playback.
NOTES:
• A “prohibited icon” may appear at the topright on the TV screen during operation,
warning that a prohibited operation has
been encountered by the DVD player or
the disc.
• With DVDs that use some titles for playback program
signals, playback may start from the second title, or it
may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you playback DVDs with
disc menu. Refer to the manual accompanying the disc
for details.
General Features
DVD-V
DVD may contain menus to navigate the disc and access special features. Press the appropriate numerical key or use the
Cursor buttons ( K / L / s / B) to highlight your selection in
the DVD main menu and press the ENTER button to confirm.
NOTE:
Disc Menus
DVD-V
1 Press the MENU button.
• The DVD main menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and
other options will appear for selection.
4 Press the Cursor buttons ( K / L / s / B ) to select
an item, and the ENTER button to confirm selection.
Title Menu
DVD-V
1 Press the TOP MENU button.
• The title menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 Press the Cursor buttons ( K / L / s / B ) to select
an item, and the ENTER button to confirm selection.
• Playback will begin at the selected Title.
CALLING UP A MENU SCREEN DURING PLAYBACK
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DVD-V
• Press the MENU button to call up the DVD main menu.
• Press the TOP MENU button to call up the title menu.
DVI Setup
1 Press the DVI button on the front panel to select
NOTE:
the DVI output mode.
The output mode changes as follows every time
DVI button is pressed.
• Contents of menus and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
• DVI indicator on the front panel lights when DVI output
mode is selected.
OFF
480P
720P
1080
OFF (Default): No video output from the DVI-D OUT connector.
480P: Video output from the DVI-D OUT jack at 480p.
720P: Video output from the DVI-D OUT jack at 720p.
1080: Video output from the DVI-D OUT jack at 1080i.
NOTES:
• When changing the DVI output mode, video and audio
signals may distorted temporarily.
• Use a display with an HDCP-compatible DVI-D port.
• When there is video output from the DVI-D OUT jack,
no signal is output from the COMPONENT VIDEO OUT
jacks.
– 15 –
EN
English
Basic Playback
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 16
PLAYING A DISC
Step by Step Playback
Slow Forward / Slow Reverse
DVD-V
1 During playback, press the
STILL/PAUSE button.
DVD-V
1 During playback, press the STILL/PAUSE button.
D Button
2 Press the h or g button.
1
• Slow motion playback will begin and
sound will be muted.
3 Press the h or g button
F
• Playback will pause and sound
will be muted.
2 The disc advances by one frame each time the
STILL/PAUSE button is pressed.
repeatedly to select the required
speed.
3 To exit step by step playback, press the PLAY button.
2
• Slow forward or reverse speed is
different depending on the disc.
Approximate speed is 1 (1/16),
2 (1/8), and 3 (1/2).
NOTE:
• Set “STILL MODE” to “FIELD” on the display menu if pictures in the pause mode are blurred. (Refer to page 23.)
3
4 To return to normal playback, press the PLAY but-
Picture Control
DVD-V
ton.
NOTE:
• Set “STILL MODE” to “FIELD” on the Display menu if
pictures in the slow playback mode are blurred. (Refer
to page 23.)
Picture Control adjusts among Brightness, Contrast, Color,
Gamma Correction and Sharpness of the specific display.
1 During playback, press the
MODE button.
BRIGHTNESS
s +1B
Zoom
2 Press the Cursor button ( K
or L ) to switch item.
3 Press the ENTER button or the Cursor button ( s or
B ) to adjust desired item.
• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be
selected.
4 To return to normal playback, press the RETURN button.
NOTES:
DVD-V JPEG
The Zoom function allows you to enlarge the video image
and to move the zoomed image.
1 Press the ZOOM button during playback.
• Playback will continue.
2 Press the ZOOM button repeatedly to select the
required zoom factor: x2, x4 or OFF.
• The setting display will disappear in 10 seconds of no use.
• This function cannot be used during Dialog Speed.
(Refer to page 22.)
• Only x2 zoom is available for JPEG.
x2
x4
Resume
DVD-V
CD
MP3
JPEG
WMA
3 Use the Cursor buttons ( L / K / B / s ) to move
1 During playback, press the
STOP button.
the zoomed picture across the screen.
Resume ON
• Resume message will appear
on the TV screen.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
2 Press the PLAY button, play-
back will resume from the
point at which playback was stopped.
• To cancel resume, press the STOP button twice.
NOTES:
• The resume information be saved even when the power
is switched off.
• For MP3, JPEG or WMA, playback will resume from the
beginning of the current track.
Fast Forward / Reverse Search
DVD-V
CD
MP3
WMA
1 During playback, press the h or g button repeat-
edly to select the required forward or reverse speed.
• For DVDs, fast forward or reverse search speed is different depending on the disc. Approximate speed is 1
(x2), 2(x8), 3 (x50), and 4 (x100).
4 To exit zoom mode, press the ZOOM button to
OFF.
NOTES:
Button
1
2
3
4
1
2
3
4
Button
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
• Navigation screen is not available on JPEG.
• You cannot move the zoomed picture on some JPEG
files.
• For audio CDs, the approximate speed is x16.
• For MP3 and WMA, the approximate speed is x8.
2 To return to normal playback, press the PLAY button.
– 16 –
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 17
PLAYING A DISC
DVD-V
1:23:45
• Playback will start at the specified time.
• For Time Search, “0” appears automatically when there
is no need to enter a number. For example,
“0:0_:_ _” appears in the Time Search screen if the
total time of the disc is less than 10 minutes.
By using the SEARCH MODE button
1 Press the SEARCH MODE button
/29
repeatedly until the Chapter
search, or the Title search
appears during playback.
_:__:__
desired disc time with the
Numeric buttons.
3 Press the CLEAR button to erase an incorrect
input.
Repeat
2 Enter the desired chapter/title
• The REPEAT button is available only during playback.
number with the Numeric buttons.
REPEAT TITLE / CHAPTER
By using the SKIP buttons H G
During playback, press the SKIP G button to move to the next
chapter. Press it repeatedly to skip subsequent chapters. Press
the SKIP H button to go back to the beginning of the current
chapter. Press it repeatedly to go to the previous chapter.
Track Search
CD
MP3
JPEG
WMA
DVD-V
To activate the repeat function, press the REPEAT button
during playback.
•
The repeat mode changes as described below every time
you press the button.
OFF
(repeat off)
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
There are three ways to begin playback on an Audio CD,
MP3, JPEG or WMA disc at a specific Track.
NOTES:
By using the Numeric buttons
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
1 Press the Numeric buttons to enter the desired
Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
• To play track 26, press +10, 2, 6 on the Numeric button.
REPEAT TRACK / GROUP / ALL
CD
By using the SEARCH MODE button
1 Press the SEARCH MODE but__/ 15
ton.
• The track search display
appears.
2 Within 30 seconds, select a desired track number using
the Numeric buttons. For single digits press 0 first if the
total track of the disc is more than 10 tracks.
• Playback will start at the selected track.
To activate the repeat function, press the REPEAT button
during playback.
•
The repeat mode changes as described below every time
you press the button.
OFF
(repeat off)
TRACK
(current track repeat)
ALL
(entire disc repeat)
NOTES:
By using the SKIP buttons H G
During playback, press the SKIP G button to move to the next
track. Press it repeatedly to skip subsequent tracks. Press the
SKIP H button to go back to the beginning of the current track.
Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the front panel display.
• If any SKIP button is pressed while the playback is
paused, the playback will be paused again after skipping to the next track.
NOTE:
• The Repeat Track setting will be cleared when moving
to other track.
• Repeat playback does not function during A-B repeat
playback.
MP3
OFF
(repeat off)
• The SKIP H G buttons are not available when playback is stopped.
Time Search
TRACK
(current track
repeat)
JPEG WMA
GROUP
ALL
(current folder
repeat)
(entire disc
repeat)
NOTE:
DVD-V
• The Repeat Track / Group setting will be cleared when
moving to other Track or Group.
CD
1 Press the SEARCH MODE button until the Time
Search screen appears on the TV screen.
– 17 –
EN
English
2 Within 30 seconds, enter a
Title / Chapter Search
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 18
PLAYING A DISC
A-B REPEAT
Random Playback (CD)
DVD-V
1 Press the A-B REPEAT but-
CD
CD
This shuffles the playing order of tracks instead of playback
in the original sequence.
1 In stop mode, press the RAN-
A-
ton at your chosen starting
point.
again at your chosen end
point.
the A-B REPEAT button.
random playback.
NOTES:
• To repeat the current track in the random selection,
press the REPEAT button repeatedly until
TRACK
appears during playback. To repeat the entire random
selection press the REPEAT button repeatedly until
ALL appears during playback.
• Refer to page 20 for “Random Playback” of MP3, JPEG,
and WMA.
OFF
NOTES:
• The A-B Repeat section can only be set within the current title (for DVDs), or current track (for Audio CDs).
• A-B Repeat is not available with some scenes in DVD.
• To cancel the A point which was set, press the CLEAR
button.
• A-B Repeat playback does not function during title,
chapter, track or all repeat playback.
MP3 / JPEG / WMA Playback
MP3
Program Playback (CD)
CD
WMA
desired group (folder) or track.
• The PROGRAM screen will appear.
2 Press the Cursor buttons
• Press the CLEAR button to erase
the most recently entered program.
JPEG
When a CD-R or CD-RW disc with MP3, JPEG or WMA files
is inserted in the DVD player and the MENU button is
pressed, the FILE LIST will appear on display. The number of
tracks is also displayed on the front panel.
1 Press the Cursor buttons ( K or L ) to select the
You can determine the order in which tracks will play.
1 In stop mode, press the MODE button.
( ▲ or ▼ ) to select a track,
then press the ENTER button.
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
2 Press the PLAY button to start
A-B appears briefly on the
TV screen, and the repeat sequence begins.
3 To exit the sequence, press
CD-DA
• The RANDOM screen will appear.
•
A- appears briefly on the TV screen.
2 Press the A-B REPEAT button
A-B
•
RANDOM
DOM button.
• To return to the previous screen, press the s button.
• If a group (folder) is selected, press the B or ENTER
button to go on to the track selection screen. Press the
Cursor buttons ( K or L ) to choose a track, then press
the PLAY or ENTER button.
• If a track is selected, press the PLAY or ENTER button
to start playing tracks. The selected track and the subsequent tracks will be played.
• Press the TOP MENU button to return to the first item.
PROGRAM
CD-DA
T
T
T
T
T
T
1
2
3
4
5
6
7
T
1 3:30
T
3:30
4:30
5:00
3:10
5:10
1:30
2:30
1/2
TOTAL 0:03:30
T
1 3:30
1/1
3 Press the PLAY button to play
the programmed tracks.
2 Press the STOP button to stop playback.
NOTES:
• Press the STOP button once and then the PLAY button
again, playback will restart from the point where the
STOP button was pressed. (Program continued.)
• Press the STOP button twice and then the PLAY button
again, playback will restart from the first track in the
usual way. Your programs are still stored until either the
disc tray is open or power is turned off.
• Up to 99 programs can be entered.
• To erase all the programmed track at once, select ALL
CLEAR at the bottom of the list at step 2 .
• To repeat the current track in the program, press the
REPEAT button repeatedly until
TRACK appears
during playback. To repeat the entire program, press
the REPEAT button repeatedly until
ALL appears
during playback.
• Refer to page 20 for “Program Playback” of MP3,
JPEG, and WMA.
• If eight or more tracks were in a program, use the SKIP
button H or G to see all the tracks.
NOTES:
– 18 –
• Folders are known as Groups; files are known as
Tracks.
• A symbol of “ ” is shown on the top of the group name.
• A symbol of “ ” is shown on the top of MP3 files.
• A symbol of “ ” is shown on the top of JPEG files.
• A symbol of “ ” is shown on the top of WMA files.
• If there are none than eight tracks, a down arrow “L”
appears on the screen. Use the Cursor buttons
( K or L ) to see all the tracks.
• Maximum of 255 folders can be recognized.
• Maximum of 512 files can be recognized.
• Up to 8 hierarchies can be created.
• If no MP3, JPEG or WMA files are found in the group,
the group is not displayed.
• The DVD player can reproduce data recorded as per
ISO 9660 Level 1, Level 2 or Joliet on the disc.
• It can also run a disc on which data is recorded in a
multi-session.
• For more details of recording systems, refer to the
instruction manual for the CD-R / CD-RW drive or the
writing software.
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 19
This player recommends the use of files recorded at the below
specifications:
Applicable MP3 file
Sampling fre- 44.1kHz
quency
48kHz
Type
MPEG1
audio layer 3
Remarks
• It is prohibited to record
MP3 sound on a digital
device when connection is
made digitally.
• MP3 files recorded at fixed
bit rate of 112 kbps or higher are recommended.
Kodak Picture CD
The DVD player can also run JPEG files stored on Kodak
Picture CDs. You can enjoy picture images on the television
set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that deals
with developing service of Kodak Inc.
1 Press the MENU button.
Kodak Picture CD menu
appears.
Remarks
Sampling fre- 44.1kHz
quency
48kHz
• Those frequencies are
applicable to WMA version
9.
Bit rate
48–192kbps
• Ensure that the copyright
function is set to off when
preparing a WMA disc.
Type
• A prohibition “disable” symbol will appear if the user
attempts to run a non-reproducible file such as copyWMA version 9 right-protected.
• Recorded in 5.1 channel
format cannot be played
back.
Picture2
Picture3
• If all menu items cannot be
Picture4
Picture5
Picture6
displayed in the screen
scope, “G ” appears at the
1/32
right bottom of the screen,
indicating that the user can
Current track number /
the number of total tracks
view remaining items on the
next page. “H” appears, it indicates that the user can
view other items on the previous page. The track number of the currently highlighted item and the total tracks
are shown at the center bottom of the screen.
• If “G” is shown at the right bottom, use the SKIP G
button to view the next page. If “H” is shown at the
left bottom, use the SKIP H button to view the previous page.
• It may take some time until all menu items are displayed on the menu screen.
Applicable JPEG file
Remarks
Upper limit:
• A JPEG image that extends
Size of
6300x5100 dots beyond the screen is
image
Lower limit:
reduced so that it will be
32x32 dots
displayed within the screen.
Applicable WMA file
Picture1
2 Press the Cursor buttons (K / L / s / B), select a
desired track to be played, then press the PLAY or
ENTER button.
• If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to the next
one in turn.
3 Press the STOP button, to stop playback.
Information on MP3, JPEG and WMA discs
• This DVD player can play back images and sounds from
data recorded in MP3 and JPEG formats on CD-R and
CD-RW discs.
• A file with an extension of “.mp3 (MP3)” is called an “MP3
file”.
• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a “JPEG file”.
The DVD player can run an image file conforming to the
Exif specification. Exif is a file format, Exchangeable
Image File format established by Japanese Electronic
Industry Development Association (JEIDA).
• A file with an extension of “.wma (WMA)” is called a
“WMA file”.
• Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)” and “.jpeg (JPEG)” or “.wma (WMA)” will not be
listed in the MP3, JPEG or WMA menu.
• If the file is not recorded in MP3, JPEG or WMA format,
noise may be produced even if the file extension is either
“.mp3 (MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma
(WMA)”.
• The name of group and track can be displayed in up to 25
characters. Unrecognisable characters will be replaced
with asterisks. The ninth and deeper hierarchies cannot
be displayed.
• Unplayable groups or tracks may be displayed depending
on the recording conditions.
• If the TOP MENU button is pressed when a file list is displayed, the first item will be highlighted.
Notes on JPEG and Kodak Picture CD:
• A track is displayed for 5 seconds and then the next
track is displayed.
• Every press on the B button will turn the image clockwise by 90 degrees when an image is displayed. A
press on the s button will turn the image counterclockwise by 90 degrees.
Notes on WMA:
• The DVD player can reproduce data recorded as ISO
9660 level 2 with 31 characters file name included
punctuation marks. The name of file can be displayed
in up to 25 characters.
• Maximum of 8 subfolders can be recognized.
• Maximum of 255 folders can be recognized.
• Maximum of 512 files can be recognized.
• It can also be displayed tag information of WMA at
least 64 characters.
• For a file name with an extension of Joliet as Unicode
format, up to 64 characters can be recognized.
– 19 –
EN
English
PLAYING A DISC
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 20
PLAYING A DISC
NOTE:
Slide Show Mode
• If the file does not contain tag information, “NOT AVAILABLE” will be displayed.
JPEG
Program Playback (MP3/JPEG/WMA)
You can switch to the slide show mode during playback.
1 Press the MODE button during playback.
• The slide show mode screen will appear.
• The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture CD
menu screen.
MP3
2 Press the ENTER button.
• The slide show mode will change.
CUT IN/OUT: The entire image appears in one time.
FADE IN/OUT: The image appears gradually and then
disappears.
This feature allows you to program an
MP3, JPEG or WMA disc to play in a
desired sequence.
1 In stop mode, press the MODE
button.
• A track selection screen appears.
3 Press the Cursor buttons (K or
to show the track number,
the elapsed time, the repeat
status, and the playback status at the top of the screen.
•
JPEG
•
ABC
DEF
GHI
JKL
MNO
ALL CLEAR
1/1
2/2
DEF
ABC
<Example: MP3>
DEF
1/1
2/2
DEF
TR
1/36 0:01:15
T
4 Press the PLAY button to start programmed play-
back.
• Programmed play starts.
NOTES:
• Press the CLEAR button, and the last-programmed
entry will be deleted.
• To erase all the programmed tracks at once, select ALL
CLEAR at the bottom of the list at step 2 .
• Press the RETURN button, and the STOP screen will
show up with the program contents in memory.
• Press the STOP button once and then press the PLAY
button, playback will restart from the beginning of the track
being played previously. (program continued.)
• Press the STOP button twice and then the PLAY button
again, playback will restart from the first track in the usual
way. Your programs are still stored until either the disc tray
is open or power is turned off.
• Up to 99 tracks can be set in a program.
• If a disc in inserted that contains mixed MP3, JPEG
and WMA files, program setting allows 99 tracks for
combination of MP3, JPEG and WMA files.
• If eight or more tracks were in a program, use SKIP
button H or G to see all the tracks.
WMA
to show the track number,
the elapsed time, the repeat
status, and the playback status at the top of the screen.
PROGRAM
DEF
GHI
JKL
MNO
ALL CLEAR
You can check information on the current file.
1 Press the DISPLAY button.
TRACK 01
• The name of the file currently
in play will be displayed.
4 Press the DISPLAY button
1/1
ABC
PROGRAM
3 Press the DISPLAY button to exit.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button to exit.
3 Press the DISPLAY button.
• Artist name based on tag
information currently in play
will be displayed.
ABC
DEF
GHI
ALL CLEAR
• Press the CLEAR button to
erase the incorrect input.
• The programmed track is displayed in the right-hand screen.
• If the entire program cannot be
displayed at once on the screen,
“L” appears to go to the next page.
• Pressing the s button will show a list of folders that
belong to the one-level upper hierarchy than the currently selected folder.
will be displayed when the repeat play has been
selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat
2 Press the DISPLAY button.
• Title name based on tag information currently in play will be
displayed.
MY COLLECTION
L) to select a track, then press
the ENTER button to save it in
a program.
You can check information on the current file.
1 Press the DISPLAY button.
TRACK 01
• The name of the file currently
in play will be displayed.
2 Press the DISPLAY button
PROGRAM
2 Press the Cursor buttons (K or
L) to select a group, then
press the ENTER button.
MP3
WMA
1/1
• The PROGRAM screen will
appear.
3 Press the MODE button to exit.
On-Screen Information
JPEG
TITLE NAME
ARTIST NAME
Random Playback (MP3/JPEG/WMA)
TR
1/36 0:01:15
T
MP3
JPEG
WMA
1 In stop mode, press the
RANDOM button.
will be displayed when the repeat play has been
selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat
• The RANDOM screen will appear.
RANDOM
DISC TITLE
RANDOM PROGRAM
--no indication--
2 Press the PLAY button to play
the tracks in random order.
5 Press the DISPLAY button to exit.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button to exit.
– 20 –
• Random play starts.
• For a disc containing mixed MP3, JPEG and WMA
files, random play of those files will be performed.
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 21
PLAYING A DISC
DVD-V
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
your desired subtitle language.
The DVD player allows you to select a language (if multiple
languages are available) during DVD disc playback.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
• The selected language will be displayed on the display
bar at the top of the screen.
• Press the Cursor buttons ( s or B ) to turn ON or
OFF subtitles during playback.
desired language.
1.ENG/6
Subtitle 1
1.ENG Dolby D 3/2.1ch 48k/3
HELLO
2.FRE/6
Subtitle 2
2.FRE Dolby D 3/2.1ch 48k/3
OFF
OFF
Bon jour
3.JPN Dolby D 3/2.1ch 48k/3
3 To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
NOTES:
NOTES:
• Some discs allow subtitle language setting on the disc
menu. (Operation varies between discs. Refer to the
manual accompanying the disc.)
• Pressing the SUBTITLE button may not work on some
DVDs with multiple subtitle languages (e.g. DVDs which
allow subtitle language setting on the disc menu).
• If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have
subtitles in that language.
• If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change
the Subtitle language setting. If you choose any other
languages, ‘---’ will be displayed instead. (Refer to page
25.)
• If the disc has no subtitle language, ‘NOT AVAILABLE’
will be displayed.
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
• Some discs allow to change audio language setting on
the disc menu. (Operation varies between discs. Refer
to the manual accompanying the disc.)
• Pressing the AUDIO button may not work on some DVDs
with multiple audio languages (e.g. DVDs which allow to
change audio language setting on the disc menu).
• If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change
the Audio language setting. If you choose any other languages, ‘---’ will be displayed instead. (Refer to page 25.)
• Audio language selection cannot be made during
Dialog Speed. (Refer to page 22.)
• DTS sound is output only from the digital audio outputs.
Camera Angle
Stereo Sound Mode
DVD-V
CD
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
) mark appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
1 Press the AUDIO button repeatedly during play-
back to select between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH
- only left channel is active
R-CH
- only right channel is active
STEREO
Both right and left channels
are active (stereo).
desired angle.
1/8
L-CH
Angle 1
Only the left channel
is active.
2/8
R-CH
Angle 2
Only the right channel
is active.
NOTES:
• If the Virtual Surround setting is ON, the sound mode
will be fixed to STEREO.
• Stereo sound mode will not be changed when playing DTS
-CD.
8/8
Angle 8
NOTE:
Subtitle Language
DVD-V
• If the “ANGLE ICON” setting is “OFF” in the Display
menu, the (
) will not appear.
The DVD player allows you to select a language for subtitle (if
available) during DVD playback.
– 21 –
EN
English
Audio Language
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 22
PLAYING A DISC
Changing the On-Screen Display
Virtual Surround
DVD-V
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button
during playback to show the
current chapter.
9/49
0:00:00 -0:03:30
• The elapsed and remaining
playing time of the current chapter will be displayed.
2 Press the DISPLAY button to show the current title.
• The elapsed and remaining playing time of the current
title will be displayed.
3 Press the DISPLAY button
IIIIIII
to show the BIT RATE and
the current repeat setting.
T
DVD-V
CD
MP3
OFF
MODE button repeatedly until
the Virtual Surround setting
appears.
2 Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3 Press the RETURN button to exit.
NOTES:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than “STEREO” (for Audio CD
play only).
• This function cannot be used during Dialog Speed.
(Refer to page 22.)
L1
• If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).
4 Press the DISPLAY button to remove the display.
Black Level Setting
CD
DVD-V
1 Press the DISPLAY button during playback, the
current track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button to show the total tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
3 Press the DISPLAY button to remove the display.
Hints for the On-Screen Display
• C
• T
• A
•A B
-
WMA
You can enjoy surround-sound effect with two speakers.
1 During playback, press the
Adjust the Black Level Setting to make the black parts of the
picture as bright as you prefer.
1 During playback, press the
ON
MODE button repeatedly
until Black Level setting
appears.
2 Press the ENTER button to switch ON/OFF.
ON (Default) : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
3 Press the RETURN button to exit.
NOTE:
indicates Chapter repeat
indicates Title or Track repeat
indicates Disc repeat
indicates A-B repeat
• This function cannot be used during Dialog Speed.
(Refer to page 22.)
Dialog Speed
Marker Setup Screen
DVD-V
DVD-V
Available only on discs recorded in the Dolby Digital format.
Dialog Speed plays back in slightly faster or slower speed
while keeping the sound quality as in the normal playback.
1 During playback, press the MODE button repeated-
CD
Use markers to memorize your favorite places on a disc.
1 Press the SEARCH MODE
1 2 3 4 5 6 7 8 9 10 AC
button repeatedly until the
-- --:--:-display screen and Markers
appear during playback.
2 Press the Cursor buttons ( s or B ) to select 1, 2,
3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “_ : _ _ : _
_” appears in the display.
3 When the disc reaches the point you want to
remember, press the ENTER button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4 To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
s or B button to choose the desired marker, then
press the ENTER button.
5 Press the SEARCH MODE or RETURN button to
exit.
NOTES:
• Opening the disc tray or turning off the power or select
AC at step 2 and press the ENTER button will erase
all Markers.
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
ly until the Dialog Speed
setting appears.
OFF
• “OFF” appears on the TV
screen.
2 Press the ENTER button or the Cursor button ( s
or B ) to switch among
(x1.3),
(x0.8) and
OFF.
: Plays back approximately at 0.8 times of normal playback.
: Plays back approximately at 1.3 times of normal play back.
3 To return to normal playback, press the PLAY button.
NOTES:
– 22 –
• Every time you press the STOP button, the setting will
be turned OFF.
• Subtitle can be viewed during this function.
• Picture Control, Black Level and Audio (language) setting cannot be changed while using this mode.
• Virtual Surround does not function while using this mode.
• This feature may not work at some point on a disc.
• When using digital audio connection (COAXIAL or
OPTICAL), the LPCM sound will be output.
• When using the Dialog Speed function with 5.1 channel
digital outputting, the analog output sound will be fixed
at 2 channel.
• When using digital audio connection, only the Dolby
Digital sound will be available.
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 23
In Setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode (refer to pages 23 and 24) are available.
QUICK mode consists of the setting menus often needed, and you can make all settings required in CUSTOM
mode. You can make the settings of the items with QUICK mark in QUICK mode.
STILL MODE (Default : AUTO)
Language Setting
• Press the Cursor buttons ( K or
L ) for an item selection (AUTO,
FIELD, or FRAME), then press
the ENTER button.
• This adjusts the resolution of
pictures while in the STILL
(PAUSE) mode.
• AUTO is normally selected (default).
• If you select FIELD, pictures in the STILL mode will be
stabilised although they will be coarse due to little
amount of data.
• If you select FRAME, pictures in the STILL mode will
be highly defined although they will be blurred due to
output of two fields at the same time.
DISPLAY
STILL MODE
AUTO
FIELD
FRAME
Language options are not available with some discs.
1 Press the SETUP button in STOP mode.
2 Press the Cursor buttons ( s or B ) to select CUS-
TOM, then press the ENTER button.
• CUSTOM mode will appear.
3 Press the Cursor buttons ( s
or B ) to select LANGUAGE,
then press the ENTER button to
confirm.
4 Press the Cursor buttons ( K or
L ) to select the below items,
then press the ENTER button.
DIALOG (Default : ORIGINAL)
LANGUAGE
DIALOG
SUBTITLE
DISC MENU
OSD
ORIGINAL
OFF
ENGLISH
ENGLISH
ANGLE ICON (Default : ON)
• Press the ENTER button repeatedly to turn Angle mark ON or
OFF.
• Sets the audio language.
SUBTITLE (Default : OFF)
• Sets the subtitle language.
DISC MENU (Default : ENGLISH)
DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
PROGRESSIVE
PANEL DISPLAY
4:3 LETTER BOX
AUTO
ON
ON
OFF
BRIGHT
• Sets the language for DVD Menu.
OSD (Default : ENGLISH)
QUICK
AUTO POWER OFF (Default : ON)
• Sets the language for the On-Screen display.
• Press the ENTER button repeatedly to turn Auto Power Off ON or
OFF.
• It will turn the DVD player to off automatically after 35 minutes of no
use.
5 Press the Cursor buttons ( K or L ) to select a set-
ting, then press the ENTER button.
• If OTHER is selected in the DIALOG, SUBTITLE or
DISC MENU screen, press four-digit number to enter
the code for the desired language. (Refer to the
language code list on page 25).
• Only the languages supported by the disc can be
selected.
DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
PROGRESSIVE
PANEL DISPLAY
• Language Setting for DIALOG and SUBTITLE is not
available with some discs. Then use the AUDIO and
SUBTITLE buttons.
Details are on page 21.
or B ) to select CUSTOM,
then press the ENTER button.
• CUSTOM mode will appear.
3 Press the Cursor buttons ( s
4:3 LETTER BOX
AUTO
ON
ON
OFF
BRIGHT
• Press K or L to set PROGRESSIVE to ON or OFF, then press
the ENTER button.
• The setting will be effective
when you exit the setup screen
by pressing SETUP.
• When PROGRESSIVE is ON,
“P.SCAN” appears on the DVD player’s display after
you exit the setup screen.
• Refer to page 11 for more details.
NOTE:
You can change certain aspects of the DVD display screens,
on-screen messages and the display panel on the front of the
DVD player.
1 Press the SETUP button in STOP mode.
2 Press the Cursor buttons ( s
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
PROGRESSIVE
PANEL DISPLAY
PROGRESSIVE (Default: OFF)
6 Press the SETUP button to exit.
Display Setting
DISPLAY
4:3 LETTER BOX
AUTO
ON
ON
OFF
BRIGHT
PANEL DISPLAY
(Default : BRIGHT)
• Press the Cursor buttons ( K or
L ) for an item select BRIGHT,
DIMMER and AUTO, then press
the ENTER button.
• When AUTO is selected, the display dims only during playback.
DISPLAY
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
PROGRESSIVE
PANEL DISPLAY
4:3 LETTER BOX
AUTO
ON
ON
OFF
BRIGHT
or B ) to select DISPLAY, then
press the ENTER button to
confirm.
4 Press the Cursor buttons ( K or L ) to select the below items, then press the ENTER button.
TV ASPECT (Default : 4:3 LETTER BOX)
5 Press the SETUP button to exit.
NOTE:
• Be sure to press the SETUP button, or the setting will
not work.
QUICK
• Press the Cursor buttons ( K or
L ) for an item selection, then
press the ENTER button.
• Select 4:3 LETTER BOX for a
black bars appears on top and
bottom of the screen.
• Select 4:3 PAN & SCAN for a full
height picture with both sides trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
– 23
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
–
EN
English
DVD SETUP
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 24
DVD SETUP
4 Press the Numeric buttons to enter your 4-digit
Audio Setting
password.
• When doing this for the first time,
enter any 4-digit number by pressing the Numeric buttons (except
for 4737), then press the ENTER
button. That number will be used
as the password from the second
time onward. Record your password in case you forget it.
• If you forget the password, press 4, 7, 3, 7. The original
password will be cleared and parental levels will be set
to “ALL”. Enter a new 4-digit password, then press the
ENTER button.
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.
1 Press the SETUP button in STOP mode.
2 Press the Cursor buttons ( s or B ) to select
RATINGS
PASSWORD
Please enter a 4-digit password.
CUSTOM, then press the ENTER button.
• CUSTOM mode will appear.
3 Press the Cursor buttons ( s
or B ) to select AUDIO, then
the ENTER button to confirm.
4 Press the Cursor buttons ( K
or L ) button to select the
below items, then press the
ENTER button.
DRC (Dynamic Range Control)
(Default : ON)
• To compress the range of sound
volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
ON
OFF
ON
ON
5 Press the Cursor buttons ( K
or L ) to select RATING LEVEL, then press the ENTER button.
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
ON
OFF
ON
ON
or L ) to select the desired level, then press the ENTER button.
7 Press the SETUP button to exit.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
ON
OFF
ON
ON
ON:
To Change the Password:
AUDIO
OFF:
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
ON
OFF
ON
ON
1) Follow the steps 1 to 4 above.
2) Press the Cursor buttons ( K or L ) to select “CHANGE”,
then press the ENTER button.
3) Enter a new 4-digit password, then press the ENTER button.
4) Press the SETUP button to exit.
IF YOU FORGET THE PASSWORD
1 Press 4, 7, 3, 7 at step 4 .
• Password will be cleared and rating level will be set to ALL.
2 Repeat steps 4 - 7 to re-establish the parental lock.
QUICK
Output by DTS sound.
Set to ON when the unit is
connected to DTS decoder.
No DTS sound will be output.
CONTROL LEVELS
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
ON
OFF
ON
ON
• ALL
Parental lock is cancelled.
• Level 8
DVD software of any grade (adult/general/children) can
be played back.
• Levels 7 to 2
Only DVD software intended for general use and children can be played back.
• Level 1
Only DVD software intended for children can be played
back, with those intended for adult and general use
prohibited.
• DTS sound is output only from the digital audio outputs.
5 Press the SETUP button to exit.
Ratings Control
Ratings Control limits playback of discs with unsuitable audience
ratings. A 4-digit password established by the user will unlock
the parental lock.
This feature allows you to prevent discs with objectionable
scenes from being played by your children.
RATING LEVEL
Rating Level allows you to set the rating level of your DVD discs.
Playback will stop if the disc’s ratings exceed the level you set.
1 Press the SETUP button in STOP mode.
2 Press the Cursor buttons ( s or B ) to select CUS-
TOM, then press the ENTER button.
3 Press the Cursor buttons ( s or B ) to select RAT-
INGS, then press the ENTER button.
L
• This function may not work on some DVDs. Be sure if
the RATINGS operates in the way you have set.
DOLBY DIGITAL (Default : ON)
DTS (Default : ON)
RATINGS
RATING LEVEL
ALL
8
7 [NC-17]
6 [R]
5
4 [PG13]
3 [PG]
NOTE:
• The sound will be down sampled at 48 kHz, even if you
set to OFF.
Set to ON when the player is connected to Dolby Digital decoder.
ON:
Output by Dolby Digital.
OFF: Convert the Dolby Digital
to PCM.
ALL
6 Press the Cursor buttons ( K
When playing disc with copyright protection
QUICK
RATING LEVEL
CHANGE
AUDIO
LPCM SELECT (Default : OFF)
• Set to ON when outputting in
48kHz.
• This function is available only on
digital outputting of a disc
recorded in 96 kHz.
RATINGS
Returning all selections of SETUP
(except for RATINGS) to their default settings
This allows you to return all selections of SETUP (except for
RATINGS) to their default settings.
1 Press the SETUP button in STOP mode.
2 Press the Cursor buttons ( s or B ) to select INI-
TIALIZE, then press the ENTER button.
3 Press the Cursor buttons ( K or L ) to select YES,
then press the ENTER button.
4 Press the SETUP button to exit.
NOTE:
• When you cancel to INITIALIZE at step 3 , select NO.
– 24 –
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 25
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
Language
Code
Language
Code
Language
Code
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 21. If you choose any other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
Cleaning the disc lens
• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Operating Instruction, the laser optical pickup unit may be dirty. Consult your dealer or
an Authorised Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
•
•
•
•
Use discs which have the following logos on them.
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played on the this product. Do not attempt to play such discs, as they may damage the
player.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
– 25 –
EN
English
DVD SETUP
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 26
TROUBLESHOOTING GUIDE
If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, consulting the following checklist.
Problem
Solution
No power
– Check if the AC power cord is properly connected.
– Unplug the outlet once, and wait for 5-10seconds and
then plug it in again.
––
––
No sound or picture
– Check if the TV is switched on.
– Check the video connection.
– Check the VIDEO/AUDIO cable connections to the TV.
– When there is video output from the DVI-D OUT
connector, no signal is output from the COMPONENT
VIDEO OUT jacks. When using these jacks, set DVI
output mode to OFF.
– Check if the INTERLACE/PROGRESSIVE mode is set
correctly according to your TV.
––
13, 14
12, 13
14, 15
Distorted picture
Page
23
– Sometimes a small amount of picture distortion may
appear.
This is not a malfunction.
– Connect the player directly to the TV.
––
Completely distorted picture or black/white
picture with DVD
– Connect DVD player directly to the TV.
– Make sure the disc is compatible with the DVD player.
13
6
No sound or distorted sound
– Adjust the volume.
– Check that the speakers are connected correctly.
––
––
No audio at digital output
– Check the digital connections.
– Check if the audio format of the selected audio
language matches your receiver capabilities.
12
21, 23
No DTS sound output
– Use a DIGITAL AUDIO OUT jack when outputting the
DTS sound.
12,24
Picture freezes momentarily during playback
– Check the disc for fingerprints/scratches and clean with
a soft cloth during playback wiping from center to edge.
– Clean the disc.
25
Disc cannot be played
– Clean the disc.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– Cancel the parental lock or change the control level.
– Insert a correct disc that plays on this player.
25
––
––
24
6
No return to start-up screen when disc is
removed
– Reset the player by switching the player off, then on
again.
––
The player does not respond to the remote
control
– Aim the remote control directly at the sensor on the
front of the player.
– Reduce the distance to the player.
– Replace the batteries in the remote control.
– Re-insert the batteries with their polarities (+/– signs)
as indicated.
––
Buttons do not work or player stops
responding
– To completely reset the player, unplug the AC cord from
responding the AC outlet for 5-10 seconds.
––
Player does not respond to some operating
commands during playback
– Operations may not be permitted by the disc.
Refer to the instructions of the disc.
––
DVD player cannot read CDs/DVDs
– Use a commonly available cleaning CD/DVD to clean
the lens before sending the DVD player for repair.
––
Angle does not switch
–The angle cannot be switched for DVDs which do not
contain multiple angles. In some cases multiple angles
are only recorded for specific scenes.
––
Playback does not start when the title is selected
– Check the “RATINGS” setting.
24
The password for rating level has been
forgotten
– Enter the default password “4737”, then your forgotten
password will be cleared.
24
13
25
––
10
10
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating
Instruction for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
– 26 –
EN
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 27
SIGNAL SYSTEM
NTSC color
APPLICABLE DISCS
(1) DVD-Video Discs
1-layer 12cm single-sided discs, 2-layer 12cm single-sided
discs, 2-layer 12cm double-sided discs (1 layer per side)
1-layer 8cm single-sided discs, 2-layer 8cm single-sided
discs, 2-layer 8cm double-sided discs (1 layer per side)
(2) DVD-R/DVD-RW
(3) Compact discs (CD-DA)
12cm discs, 8cm discs
(4) CD-R/CD-RW
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.286Vp-p
Output connectors: S connectors, 1 set
VIDEO OUTPUT
Output level: 1Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
PB/CB output level: 0.7Vp-p (75Ω/ohms)
PR/CR output level: 0.7Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
DVI OUTPUT
24 pin DVI-D jack, 1 set
AUDIO OUTPUT
Output level: 2Vrms
2 channel (L, R) output connector: Pin jack, 1 set
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1 DVDs (linear PCM) : 4Hz to 22kHz (48 kHz sampling)
: 4Hz to 44kHz (96 kHz sampling)
2 CDs
: 4Hz to 20kHz
(2) S/N ratio
: 115dB
(3) Total harmonic distortion : 1kHz CD: 0.004%
(4) Dynamic range
: DVD: 100dB
CD: 98dB
DIGITAL AUDIO OUTPUT
Optical digital output: Optical connector, 1 set
Coaxial digital output: Pin jack, 1 set
POWER SUPPLY
AC 120V, 60Hz
POWER CONSUMPTION
14W (Standby: 1.0W)
MAXIMUM EXTERNAL DIMENSIONS
W: 17-3/32” (435mm)
H: 2-61/64” (75mm)
D: 8-21/32” (220mm)
(including protruding parts)
MASS
4.63 lbs (2.1 kg)
REMOTE CONTROL UNIT
RC-982
Infrared pulse type
Supply: DC 3V, 2 R6P/AA batteries
– 27 –
EN
English
SPECIFICATIONS
E59E0/E5UD(SP).qx3
04.7.16 1:48 PM
Page 2
ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA ELÉCTRICA, NO
EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD.
El símbolo del rayo con punta de flecha, en el interior de un
triángulo equilátero, tiene la finalidad del avisar al usuario
de que en el interior del producto hay "tensión peligrosa" sin
aislar que puede tener suficiente intensidad como para constituir un riesgo de descarga eléctrica para las personas.
PRECAUCIÓN
RIESGO DE DESCARGA
ELÉCTRICA. NO ABRIR
PRECAUCIÓN:
PARA REDUCIR EL RIESGO DE QUE SE PRODUZCA UNA DESCARGA
ELÉCTRICA, NO QUITE LA TAPA (NI EL PANEL POSTERIOR). EN EL INTERIOR NO HAY PIEZAS QUE DEBA REPARAR EL USUARIO. SOLICITE EL
TRABAJO DE REPARACIÓN AL PERSONAL DE SERVICIO CALIFICADO.
El signo de exclamación en el interior de un triángulo equilátero tiene la finalidad de avisar al usuario de que se adjuntan instrucciones de utilización y mantenimiento (servicio)
importantes con el manual que acompaña al aparato.
PRECAUCIONES
Seguridad del Láser
Esta unidad emplea un láser. Sólo el personal de servicio calificado deberá quitar la cubierta o intentar reparar este aparato, ya que
de lo contrario podrían producirse lesiones en los ojos.
PRECAUCIÓN: EL USO DE CONTROLES, AJUSTES O PROCEDIMIENTOS DIFERENTES DE LOS ESPECIFICADOS EN ESTE
MANUAL PUEDE PRODUCIR UNA EXPOSICIÓN PELIGROSA A LA RADIACIÓN.
PRECAUCIÓN: CUANDO SE ABRE LA UNIDAD Y SE ANULA EL ENCLAVAMIENTO SE PRODUCE UNA RADIACIÓN LÁSER VISIBLE E INVISIBLE. EVITE MIRAR FIJAMENTE AL RAYO.
UBICACIÓN: EN EL INTERIOR, CERCA DEL MECANISMO DE LA PLATINA.
ADVERTENCIA DE LA FCC- Este equipo puede generar o utilizar energía radioeléctrica. Los cambios o
modificaciones hechos en este equipo pueden causar interferencias perjudiciales, a menos que se aprueben
expresamente en este manual de instrucciones. El usuario puede perder el derecho a utilizar este equipo si
realiza cambios o modificaciones no autorizados.
INTERFERENCIAS EN RADIO O TELEVISIÓN
Este equipo ha sido probado y ha demostrado cumplir con los límites establecidos para un dispositivo digital de
la Clase B, de conformidad con el Apartado 15 de las Normas de la FCC. Estos límites han sido designados para
proporcionar una protección razonable contra las interferencias molestas en una instalación residencial. Este
equipo genera, utiliza y puede radiar energía radioeléctrica, y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones por radio. Sin embargo, no hay garantías de que esto no se produzca en una instalación particular. Si este equipo causa interferencias perjudiciales
en la recepción de la radio o la televisión, lo que puede determinarse fácilmente apagando y encendiendo el
equipo, al usuario se le recomienda eliminar la interferencia tomando una de las medidas siguientes:
1) Cambie la orientación o la posición de la antena de recepción.
2) Aumente la separación entre el equipo y el receptor.
3) Conecte el equipo a una toma de corriente de un circuito diferente de aquel al que está conectado el receptor.
4) Consulte a un concesionario o técnico en radio/televisión que tenga experiencia para solicitar su ayuda.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
PRECAUCIÓN: PARA IMPEDIR DESCARGAS ELÉCTRICAS, META A FONDO EL CONTACTO ANCHO DE LA
CLAVIJA EN EL RECEPTÁCULO ANCHO DE LA TOMA DE CORRIENTE.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
Cuando no utilice el aparato - Apáguelo cuando no lo utilice. Desenchúfelo de la toma de CA si no va a utilizarlo durante mucho tiempo. Desenchúfelo durante las tormentas eléctricas.
Lea con mucha atención estas instrucciones antes de utilizar su reproductor de vídeo DVD, y guárdelas
para consultarlas en el futuro en caso de ser necesario.
ACERCA DEL RECICLAJE
Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Disponga de estos materiales siguiendo los reglamentos de reciclaje de su localidad.
Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo los reglamentos de su localidad relacionados con los desperdicios químicos.
¡ Mantenga el equipo lejos de la humedad y del polvo.
¡ Nunca desmonte ni modifique el equipo de forma alguna.
¡ No coloque objetos pesados sobre el cable de alimentación de CA.
¡ Mantenga el cable de alimentación de CA lejos de equipos de calefacción.
¡ Asegúrese de reemplazar el cable de alimentación de CA cuando se dañe.
–2–
SP
E59E0/E5UD(EN).qx3
04.7.16 8:19 AM
Page 28
TOKYO, JAPAN
www.denon.com
Printed in China
5114198007
1VMN20005
E59E0UD/E59E5UD *****