Operating instructions | Denon DVD758 DVD Player User Manual

E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 1
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
DVD-758
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1) Read Instructions - All the safety and operating instructions
should be read before the product is operated.
2) Retain Instructions - The safety and operating
instructions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.
4) Follow Instructions - All operating and use
instructions should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
PORTABLE CART WARNING
8) Accessories - Do not place this
product on an unstable cart, stand, (Symbol provided by RETAC)
tripod, bracket, or table. The
product may fall, causing serious
injury to a child or adult, and
serious damage to the product.
Use only with a cart, stand, tripod,
bracket, or table recommended by
the manufacturer, or sold with the
S3125A
product. Any mounting of the
product should follow the manufacturer’s instructions, and
should use a mounting accessory recommended by the
manufacturer.
9) A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to overturn.
10) Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be blocked
or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer's
instructions have been adhered to.
11) Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For products intended to
operate from battery power, or other sources, refer to
the operating instructions.
12) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is
a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the product.
14) Lightning - For added protection for this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet. This will prevent damage to the
product due to lightning and power-line surges.
15) Power lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Servicing - Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into
the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation.
e) If the product has been dropped or damaged in
any way.
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–2–
EN
E6EG0UD(EN).qx4
07.12.21
3:24 PM
Page 3
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service
this device, due to possible eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly approved in the
manual. The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Non-use periods - Turn off the unit when it is not in use. Unplug the unit from the household AC outlet if it is
not to be used for a long time. Unplug the unit during lightning storms.
Please read this operating instructions carefully before using your DVD player, and keep it for future reference.
Cautions on Installation
Important
Use only discs marked with logos listed on page 6.
Power Supply
The main power supply is engaged when the main plug is
plugged in a 120V, 60Hz AC outlet. To operate the unit, press
the ON/STANDBY button to turn on the unit.
Warning
To avoid fire or electric shock, do not expose this unit to rain
or moisture.
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
Noise or disturbance of the picture may be generated if this
unit or any other electronic equipment using microprocessors is used near a tuner or TV.
If this happens, take the following steps:
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this
unit’s power cord and input/output connection cords.
• Noise or disturbance tends to occur particularly when using
indoor antennas or 300Ω/ohms feeder wires. We recommend
using outdoor antennas and 75Ω/ohms coaxial cables.
NOTE:
• For heat dispersal, do not install this equipment in a confined space such as a book case or similar unit.
Installation Location
10 cm or more
For safety and optimum performance of this unit:
• Do not stand the unit up vertically. Install the unit in a horizontal and stable position. Do not place anything directly on
top of the unit. Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources
of intense heat. Avoid dusty or humid places. Avoid places
with insufficient ventilation for proper heat dissipation. Do not
block the ventilation holes on the sides of the unit. Avoid
locations subject to strong vibration or strong magnetic fields.
• Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the unit.
–3–
Wall
EN
English
PRECAUTIONS
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 4
PRECAUTIONS
Dew Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a
cold room or under conditions of high humidity. Do not use the
DVD Player at least for 2 hours until its inside is dry.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from
AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the
power cord immediately and take the unit to our Authorized
Service Center for servicing.
Caution
1) Do not attempt to open the cabinet. There are no parts you can
service inside. Refer all servicing to qualified service personnel.
2) Slot and openings in the cabinet and at the side or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating these opening
must not be blocked or covered. Avoid enclosed spaces
such as book cases unless proper ventilation is provided.
3) Keep the unit away from the radiator heat sources.
4) Avoid using near strong magnetic fields.
5) Do not push objects of any kind into this through the
cabinet slot as they could touch current carrying parts or
short circuit parts resulting in a fire or electric shock.
6) Never spill liquid of any kind on this unit.
If liquid is spilled into the unit, consult qualified service engineer.
7) Use this unit in a horizontal (flat) position only.
8) This equipment is in Stand-by mode when it turns off
whilst the power cord is connected.
9) Keep the set free from moisture,water and dust.
10) Sufficiently ventilate the place of installation. If the unit is left in
a room full of the smoke from cigarettes, etc., for long periods
of time, the surface of the optical pickup could get dirty, in
which case it will not be able to read the signals properly.
11) Store the operating instructions in a safe place. After
reading the operating instructions, store them in a safe
place as they could come in handy in the future.
12) Handle the power cord carefully. Hold the plug when
unplugging the cord.
13) All the safety cautions and operating instructions should
be read before the DVD player is operated.
14) Use caution not to pinch your finger in the disc slot.
15) Do not put heavy objects on the AC power cord.
16) Keep the AC power cord away from heat appliances.
17) Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the DVD player.
18) Do not put any pressure to the DVD player when carrying.
19) Do not use the DVD player outdoors.
TABLE OF CONTENTS
■ IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . 2
■ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cautions on Installation . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dew Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Avoid the Hazards of Electrical Shock and Fire . . . . . . . 4
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
■ INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for the Progressive Scan Outputs . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Displays during Operation . . . . . . . . . . . . . . . . . . . . . . 11
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using a Remote Control . . . . . . . . . . . . . . . . . . . . . . . 11
■ CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Description - Rear Panel . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to an Audio System . . . . . . . . . . . . . . . . . . 13
Connection to 5.1-channel Surround Sound System. . . 14
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 15
Connection to a TV with an HDMI Compatible Port . . . 16
Connecting the AC Cord . . . . . . . . . . . . . . . . . . . . . . . 16
■ DISC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
HDMI Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Pure Direct Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Brightness of the Front Panel Display. . . . . . . . . . . . . . 17
TV TYPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CALLING UP A MENU SCREEN DURING PLAYBACK. . 18
DVD Audio Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLAYBACK OF ALL GROUPS . . . . . . . . . . . . . . . . . 18
PLAYBACK FROM A DESIRED GROUP . . . . . . . . . 18
PAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLAYBACK OF THE BONUS GROUP . . . . . . . . . . . 18
Still / Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
■
■
■
■
–4–
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 18
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 19
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 19
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 19
BY USING THE SEARCH MODE BUTTON . . . . . . . 19
BY USING THE SKIP BUTTONS H G . . . . . . . . 19
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
BY USING THE SEARCH MODE BUTTON . . . . . . . 19
BY USING THE SKIP BUTTONS H G . . . . . . . . 19
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 20
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 20
REPEAT TRACK / GROUP / ALL . . . . . . . . . . . . . . . 20
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . . 22
DivX® Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DivX® Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing the On-Screen Display . . . . . . . . . . . . . . . . . 24
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Dialog Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Super Audio CD Setup. . . . . . . . . . . . . . . . . . . . . . . . . 27
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Speaker Setting for ANALOG AUDIO . . . . . . . . . . . . . . 30
Speaker Setting for HDMI AUDIO . . . . . . . . . . . . . . . . 31
Ratings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
RATING LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 31
CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . . 31
Others Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Reset to the Default Settings (except for Ratings Control) . . 32
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . 32
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 33
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 5
The serial number of this product may be found on the back of the DVD player. No others have the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering
or disassembly is prohibited.
U. S. Patent Nos, 4,631,603, 4,819,098, 4,907,093, 5,315,448 and 6,516,132.
Notice for the Progressive Scan Outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 480 (525) or 576 (625) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If
there are questions regarding your TV set compatibility with this 480p (525p) or 576p (625p) DVD player, please
contact our customer service center.
Supplied Accessories
Please check to make sure the following items are included with the main unit in the carton.
Remote
control • • 1
“AA” (R6P)
batteries
••••••••2
Audio
cable• • • • 1
Video
cable • • 1
Operating
Instructions
••••••••1
AC cord
•••••••
1
Service
Station
List • • • • 1
Warranty
Card • • • 1
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual, with the following meanings.
DVD-V :
Description refers to playback of DVDVideo discs. (including DVD-R/RW discs)
MP3
:
Description refers to playback of discs formatted with MP3.
DVD-A :
Description refers to playback of DVDAudio discs.
JPEG
:
Description refers to viewing of JPEG
discs.
CD
:
Description refers to playback of Audio
CDs.
WMA
:
Description refers to playback of discs formatted with WMA.
Super
Audio CD
:
Description refers to playback of Super
Audio CDs.
DivX®
:
Description refers to playback of discs formatted with DivX®.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
–5–
EN
English
INTRODUCTION
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 6
ABOUT THE DISCS
Playable Discs
Playable
discs
DVD-Audio
* 1, 2, 4
Mark (logo)
Region code
Recorded
signals
Disc size
-
Digital audio
+
Digital video
(MPEG2)
12 cm
or
8 cm
Example
Track 1
Chapter 1
or
Digital video
(MPEG2)
MP3,
Digital picture
(JPEG),
WMA*8,
DivX®
12 cm
or
8 cm
MP3,
JPEG,
WMA,
DivX®
Group 1
Track 2
Example
DVD-Video
* 1, 2, 4
DVD-R
DVD-RW
* 1, 2, 3, 4,
5, 6, 7, 8
Disc types
Track 3
Group 2
Track 4
Track 1
Chapter 4
Chapter 1
Track 4
Track 5
Title 1
Chapter 2
Chapter 3
Title 2
Example GROUP 1
Track 1
Track 2
Track 3
Track 2
Chapter 2
GROUP 2
Track 6
(DVD-R/RW only)
Super
Audio CD
-
Super Audio CD
or
Audio CD
Digital audio
* 2, 4
Example
Audio CD
* 2, 4
Digital audio
CD-R
CD-RW
* 2, 3, 4, 6,
7, 8
Digital audio
MP3
WMA*8
Digital picture
(JPEG)
DivX®
Picture CD
* 2, 3, 4, 6,
7
JPEG
12 cm
or
8 cm
Track 1
MP3,
JPEG,
WMA,
DivX®
12 cm
is a trademark of DVD Format/Logo Licensing Corporation.
Track 2
Track 3
Track 4
Track 5
Track 4
Track 5
Example GROUP 1
Track 1
Track 2
Track 3
Track 6
GROUP 2
Track 6
is trademark of Eastman Kodak Company.
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc.and are
used under license.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: Certain DVD discs do not operate as described in this manual due to the intentions of the disc’s producers.
*2: Scratched or stained discs may not be played back.
*3: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*4: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*5: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be
played back. Depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may be distorted, etc.).
*6: If there is too much recordable space left on a disc (the used portion is less than 2-3/16 inches (55mm
across)), it may not be played back properly.
*7: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it
correctly.
*8: This player cannot play back the disc contents protected by Windows Media Digital Rights Management
(DRM).
¡ NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DVD-ROM for personal computers / CD-ROM for personal computers
• Any other discs without compatibility indications
CAUTION:
• Use caution not to pinch your finger in the disc slot.
• Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the DVD player.
–6–
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 7
FEATURES
¡On-screen display
The progressive scan system provides less flickering and
images in higher resolution than that of traditional 480i
(525i), 576i (625i) or multi television signals through the
interlace scan system.
Information about the current operation can be displayed on a
TV screen, allowing you to confirm the currently active functions (such as program playback) using the remote control.
¡Dimmer
¡TV Type
The brightness of the front panel display can be adjusted.
Use this to set your TV’s video format (MULTI, NTSC or PAL).
¡Analog 5.1-channel Dolby and DTS surround output
¡Screen Saver
The screen saver program starts if there is no activity at
the player or its remote for more than 5 minutes. The
brightness of the display is darken by 75%. The program is
deactivated when there is any activity.
This player is equipped with analog 5.1-channel Dolby and
DTS surround audio out jacks for playback.
¡HDMI (High-Definition Multimedia Interface)
You can enjoy clearer video output when connecting this
player to a display equipment with an HDMI-compatible port.
¡Picture Control
Picture Control adjusts Brightness, Contrast, Color, Gamma
Correction and Sharpness of the specific display.
¡Dialog Speed
¡Search
Playback in slightly faster or slower speed while keeping
the sound quality as in the normal playback.
Dialog speed is available only on discs recorded in the
Dolby Digital format.
Chapter search:
Title search:
Group search:
Page search:
Track search:
Time search:
¡Still/Fast/Slow/Step playback
Various playback modes are available including still pictures,
fast forward/reverse, slow motion and step frames.
¡Still Mode
Search for
Search for
Search for
Search for
Search for
Search for
or a track.
a
a
a
a
a
a
desired
desired
desired
desired
desired
desired
chapter.
title.
group.
page.
track.
time point or a title
¡Repeat
The resolution of pictures while in the still (pause) mode
can be adjusted.
Chapter
Title :
Track :
All :
: Repeated playback of a chapter of the disc.
Repeated playback of a title of the disc.
Repeated playback of a track of the disc.
Repeated playback of the entire disc.
(exclude DVD-Video)
A-B :
Repeated playback of a part between two points.
Group : Repeated playback of a folder of the
DVD-Audio/MP3/JPEG/WMA/DivX® disc being
played is possible.
¡Random Playback for Audio CD, Super Audio
CD, MP3, JPEG, DVD-Audio and WMA
This player can shuffle the playback order of tracks in
random order.
¡Program Playback for Audio CD, Super Audio
CD, MP3, JPEG, DVD-Audio and WMA
You can program the playback order of tracks in a desired
order.
¡DVD menus in a desired language
¡Zoom
2-time or 4-time magnified image can be displayed.
¡Marker
You can display DVD menus in a desired language, if
available on a DVD.
Electric reference points designated by user can be called back.
¡Resume Playback
¡Auto Power Off
The power turns off automatically if there is no activity at
the player or its remote for more than 30 minutes (refer to
page 31).
User can resume playback from the point at which the
playback has been stopped even if the power is turned off.
¡COMPONENT VIDEO OUT Jacks
¡Subtitles in a desired language
Jacks located on the back of the DVD Player which are
used to send high-quality video to a TV via Component
Video In Jacks.
You can select a desired language for subtitles if that
language is available on the DVD and DivX®.
¡Bit rate indication
¡DRC (Dynamic Range Control)
¡Selecting a camera angle
You can select a desired camera angle if a disc
contains sequences recorded from different angles.
You can control the range of sound volume.
¡Displaying a JPEG picture
¡Choices for audio language and sound mode
Kodak Picture CDs can be played back. Still images stored in
JPEG format on DVD-R/RW or CD-R/RW can also be played back.
You can select a desired audio language and sound mode if
different languages and modes are available on a disc.
¡Reproducing WMA data
¡Ratings Control (Parental lock)
You can enjoy WMA files which are recorded on DVD-R/RW or
CD-R/RW.
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Super Audio CD multi-channel playback compatibility
In addition to playing DVD-Video and DVD-Audio discs,
this player can play multi-channel Super Audio CDs and a
maximum of 5.1 channels can be output.
¡Automatic detection of discs
¡Playing back an MP3 disc
You can enjoy MP3 files which are recorded on DVD-R/RW or
CD-R/RW.
¡Reproducing DivX® data
This player automatically detects if a loaded disc is
DVD-Video, DVD-Audio, Audio CD, Super Audio CD, MP3,
JPEG, WMA or DivX®.
¡Pure Direct
The sound quality of analog audio output is improved by
turning off HDMI output, video signal output, and the front
panel display.
¡Direct Search
You can search the desired title, chapter, and track with
numeric button during playback or in stop mode.
–7–
You can enjoy DivX® files which are recorded on
DVD-R/RW or CD-R/RW.
• Official DivX® Ultra Certified product
• Plays all versions of DivX® video (including DivX® 6) with
enhanced playback of DivX® media files and the DivX
Media Format.
“WMA” (Windows Media Audio) is an audio
codec developed by Microsoft® in the United
States of America.
EN
English
¡Progressive Scan system
E6EG0UD(EN).qx4
07.12.21
3:24 PM
Page 8
FUNCTIONAL OVERVIEW
FRONT PANEL
1
2
3
13
12
4 5
11
6/25
7/29
10
9
8
REMOTE CONTROL
36
1
3
14
15
16
17
35
1.
2.
3.
4.
5.
6.
7.
8.
9.
34
10.
33
11.
12.
13.
18
19
20
21
32
31
22
23
30
6
24
5
7
4
25
29
11
26
28
27
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
ON/STANDBY (POWER ON/OFF) Buttons [page 17]
Disc loading tray
OPEN/CLOSE Button [page 17]
PLAY Button [page 17]
STOP Button [page 17]
H (SKIP DOWN) Button [page 19]
G (SKIP UP) Button [page 19]
DIMMER NTSC/PAL Button [page 17]
PURE DIRECT Button [page 17]
Press to activate Pure Direct function to reduce noise
level.
HDMI Button [page 17]
Press to set the HDMI connector’s video signal output
mode.
STILL/PAUSE Button [page 18]
Display, Remote Sensor Window
HDMI indicator [page 17]
Lights up when there is video signal output from the
HDMI OUT jack.
A-B REPEAT Button [page 20]
REPEAT Button [page 20]
RANDOM Button [pages 21]
ZOOM Button [page 19]
CLEAR Button [page 19]
ANGLE Button [page 26]
MENU Button [page 18]
ENTER Button [page 17]
Cursor Buttons [page 17]
RETURN Button [page 20]
SEARCH MODE Button [page 19]
h (Fast Reverse SEARCH) Button [page 18]
Press more than 2 seconds when you use the front
panel button for this function.
GROUP Button [page 18]
SUPER AUDIO CD SET UP Button [page 27]
PAGE Buttons [page 18]
g (Fast Forward SEARCH) Button [page 18]
Press more than 2 seconds when you use the front
panel button for this function.
SETUP Button [page 28]
SUBTITLE Button [page 26]
TOP MENU Button [page 18]
DISPLAY Button [page 24]
AUDIO Button [page 26]
Numeric Buttons [page 17]
MODE Button [page 21]
The buttons with circled numbers can only be
operated with the remote control.
–8–
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 9
FUNCTIONAL OVERVIEW
DVD-Video, DVD-Audio
CD, Supper Audio CD,
MP3, JPEG, WMA
• To turn on or standby the unit.
• To turn on or standby the unit.
• To turn on or standby the unit.
• To mark a segment between
A and B for repeated playback.
• To mark a segment between
A and B for repeated playback.
(CD, Super Audio CD)
• To mark a segment between
A and B for repeated playback.
• To repeat playback of a title,
chapter, group or track.
• To repeat playback of a
track or disc.
(CD, Super Audio CD)
• To repeat playback of a
track, group, or disc.
(MP3, JPEG, WMA)
• To repeat playback of a track,
®
group or disc. (DivX media files)
• To repeat playback of a
title or chapter.
®
(DivX video files)
• To shuffle the playing order of
groups and tracks.
(DVD-Audio)
• To play back tracks in
random order.
• To set Picture Control.
• To set Black Level on/off.
• To activate the 3D sound
(Virtual surround system).
• To set Dialog Speed.
• To program a specific
playback order. (DVD-Audio)
• To play all groups. (DVD-Audio)
• To program a specific
playback order.
• To activate the 3D sound
(Virtual surround system).
(CD, MP3, WMA)
• To activate the Slide Show mode.
(JPEG)
• To magnify part of the picture
(x2/x4).
• To magnify part of the picture (x2).
• To magnify part of the picture (x2).
(JPEG)
• To select a camera angles
on the disc.
• To rotate a picture. (JPEG)
DivX
®
POWER ON/OFF Buttons
A-B REPEAT Button
REPEAT Button
RANDOM Button
MODE Button
ZOOM Button
ANGLE Button
SUBTITLE Button
AUDIO Button
DISPLAY Button
• To select a subtitle language
on the disc.
• To set Picture Control.
• To set Black Level on/off.
• To select a subtitle language
on the disc.
• To access various audio functions
on the disc.
• To select STEREO, L-ch or R-ch.
(CD)
• To access various audio functions
on the disc.
• To display the current disc
or HDMI mode.
• To display the current disc
or HDMI mode.
• To display the current disc
or HDMI mode.
SEARCH MODE Button • To search for a title, chapter,
track, time or marker.
• To rapidly return to a location
on the disc.
• To search for a track.
• To search for a track, or time.
®
• To search for time or a
(DivX media files)
marker. (CD, Super Audio CD)
• To search for a chapter, title or
®
• To rapidly return to a location
time. (DivX video files)
on the disc. (CD, Super Audio CD)
OPEN/CLOSE Button
• To open or close the disc tray.
• To open or close the disc tray.
• To open or close the disc tray.
• To select a title, chapter, group
or track directly.
• To select a track directly.
• To select a track directly.
®
(DivX media files)
• To select a chapter or title directly.
®
(DivX video files)
• To clear the markers.
• To clear the most recently entered
track for the program playback.
(DVD-Audio)
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B Repeat.
• To clear the markers.
(CD, Super Audio CD)
• To clear the most recently entered
• To clear the numbers entered
track for the program playback.
incorrectly.
• To clear the numbers entered
• To cancel the point for A-B Repeat.
incorrectly.
• To cancel the point for A-B Repeat.
(CD, Super Audio CD)
Numeric Buttons
CLEAR Button
–9–
EN
English
Tour of the Remote Control
Buttons on remote control work in different ways for DVD-Video, DVD-Audio, Audio CD, Super Audio CD, MP3, JPEG, WMA
and DivX®: Refer to the following table for correct use.
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 10
FUNCTIONAL OVERVIEW
Tour of the Remote Control
DVD-Video, DVD-Audio
MENU Button
CD, Supper Audio CD,
MP3, JPEG, WMA
DivX
®
• To call up the menu on a disc.
• To call up the file list.
(MP3, JPEG, WMA)
• To call up the file list.
• To call up the top menu on a disc.
• To return to the top file in the
highest hierarchy of the file list.
(MP3, JPEG, WMA)
• To call up the menu on a file.
®
(DivX video files)
• To return to the top file in the
highest hierarchy of the file list.
TOP MENU Button
ENTER, Cursor Buttons
• To move the cursor and determine • To move the cursor and determine • To move the cursor and determine
its position.
its position.
its position.
RETURN Button
• To return to the previous operation
in the setup menu.
• To return to the previous
operation in the setup menu.
• To return to the previous operation
in the setup menu.
• To call up the setup menu.
• To call up the setup menu.
• To call up the setup menu.
• To skip titles/chapters/tracks.
• To skip tracks.
• To skip tracks. (DivX media files)
®
• To skip chapters. (DivX video files)
SETUP Button
SKIP Buttons
SEARCH Buttons
®
• To search forward/backward
• To search forward/backward
through a disc.
through a disc.
• To begin slow forward/slow reverse. (except JPEG)
• To search forward/backward
through a disc.
• To begin slow forward.
STOP Button
• To stop playback.
• To stop playback.
• To stop playback.
• To begin playback.
• To begin playback.
• To begin playback.
• To pause playback.
• To advance playback frame
by frame.
• To pause playback.
• To pause playback.
• To advance playback frame
by frame.
PLAY Button
STILL/PAUSE Button
GROUP Button
• To begin playback from a desired
group. (DVD-Audio)
SUPER AUDIO CD
SET UP Button
PAGE Buttons
• To select the Super Audio CD setup.
(Super Audio CD)
• To select a desired background
display image for playback.
(DVD-Audio)
Front Panel Display
Lights up when the progressive scan system is activated.
Lights up when the disc playback comes to a pause.
Lights up when playing back in slow mode.
(DVD, DivX®)
Lights up when the inserted disc is being play back.
The present display state is shown.
• TL./GR.: Title or Group
• TR./CP.: Track or Chapter
To change to the display of a title press the
DISPLAY button in the state of Resume.
Displays the chapter (title) or track
number. In case the chapter (title) or
track number is over 100, displays
“- -”.
Displays a type of the disc which is on the tray.
• DVD: DVD-Video, MP3, JPEG, WMA, DivX® on DVD-R/RW
• DVD A: DVD-Audio
• CD: Audio CD, MP3, JPEG, WMA, DivX® on CD-R/RW
Lights up when the repeat function is on.
SACD: Super Audio CD
Lights up when the ALL repeat function is on.
SACD
Lights up when the A-B repeat function is on.
Lights up when you have selected the audio file
(CD/MP3/WMA/DVD-Audio) on the program screen.
Displays the elapsed time of the chapter (title) or
track. (The display of 10 hours or more cannot be
performed.) Selected HDMI output mode is displayed.
– 10 –
EN
E6EG0UD(EN).qx4
07.12.21
3:24 PM
Page 11
FUNCTIONAL OVERVIEW
Displays during Operation
Loading the Batteries
English
1. Open the battery compartment cover.
Power on
Power off
2. Insert two “AA” (R6P) batteries, with each
one oriented correctly.
Tray open
Tray closed
3. Close the cover.
Loading the Disc
No disc inserted or cannot
read
Cautions On Batteries
HDMI output mode
(480p/576p) is selected
(576p is displayed after
480p)
HDMI output mode (720p) is
selected
HDMI output mode (1080i) is
selected
HDMI output mode (1080p)
is selected
HDMI output mode (OFF) is
selected
Super Audio CD setup
(2CH AREA) selected
Super Audio CD setup
(MULTI-CH AREA) selected
Program playback is set
Program playback setting
group (folder) is selected
• Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately once
a year, though this depends on the frequency with which
the remote control unit is used.
• If the remote control unit does not operate within a close
proximity of the main unit, replace the batteries with new
ones, even if less than a year has passed.
• The included batteries serve only for verifying operation.
Replace them with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the
proper direction, following the
and
marks in the
remote control unit’s battery
compartment.
• To prevent damage or battery fluid leakage:
• Do not mix a new battery with an old one.
• Do not mix two different types of batteries such as
alkaline and manganese.
• Do not short-circuit, disassemble, heat or dispose of
batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the fluid
from the inside of the battery compartment, then insert
new batteries.
Program playback setting
ALL CLEAR is selected
Using a Remote Control
Random playback is set
All group playback setting
NOTES:
• The front panel display has blinked while setting the
program playback.
• “P**-●●●” is displayed in the front panel display while
setting the program playback. (“**” is program number,
“●●●” is track number.)
• “A” is displayed in front panel display while selecting the
audio file (CD, MP3, WMA, DVD-Audio).
• “F-***” is displayed in the front panel display while selecting
the group (folder). (“***” is group (folder) number.)
• “A-CLEAr” is displayed in the front panel display while
selecting ALL CLEAR.
• “SHUFFLE” is displayed in the front panel display while
setting the random playback.
• “A-PLAY” is displayed on the front panel display while
setting the all group playback.
Keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the remote
control and the remote sensor on the unit.
• Remote operation may become unreliable if strong sunlight or
fluorescent light is shining on the remote sensor of the unit.
• Remote control for different devices can interfere with each
other. Avoid using remote control for other equipment located close to the unit.
• Replace the batteries when you notice a fall off in the operating range of the remote control.
• The maximum operable ranges from the unit are as follows.
- Line of sight:
approx. 23 feet (7m)
- Either side of the center: approx. 16 feet (5m) within 30˚
approx. 16 feet (5m) within 15˚
- Above:
- Below:
approx. 10 feet (3m) within 30˚
– 11 –
16 feet (5m)
30°
23 feet (7m) 16 feet (5m)
30°
EN
E6EG0UD(EN).qx4
07.12.21
3:24 PM
Page 12
CONNECTIONS
Description - Rear Panel
1
,
2
3
4
5 6
7
8
9
10
1. AC IN Terminal
Connects the AC cord to supply the power.
2. DIGITAL OUT Jacks (OPTICAL, COAXIAL)
Use either an optical or coaxial digital cable (commercially available) to connect to an AV amplifier with a built-in
decoder (AV control center).
3. HDMI OUT Jack
Use an HDMI connection cable (commercially available) to connect to a display with an HDMI compatible port.
4. AUDIO OUT Jacks
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV or Stereo system.
5. VIDEO OUT Jack
Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV or wide screen TV.
6. COMPONENT VIDEO OUT Jacks
Use a Component Video cable (commercially available) to connect these jacks if you have a TV with Component Video
in jacks. These jacks provide CB/PB, CR/PR and Y video. Along with S-Video, Component Video provides the best quality
picture.
7. S-VIDEO OUT Jack
Use the S-Video cable (commercially available) to connect this jack to the S-Video jack on your A/V-compatible TV or
wide screen TV for a higher quality picture.
8. REMOTE CONTROL IN/OUT Jacks
Connecting the DENON Satellite Remote Control to these jacks enables you to operate more than one DENON components with one remote control.
9. CONTROL CONNECTOR (RS-232C)
This is a terminal for future system expansion.
10. 5.1ch AUDIO OUT Jacks
Use speaker cables (commercially available) to connect these jacks to the 5.1 ch Audio input jacks of your AV amplifier
with 5.1-channel input terminals.
When using the DENON Satellite Remote Control,
1. Connect the DENON Satellite Remote Control to the REMOTE CONTROL IN jack of this player. This allows you to operate this player with the Satellite Remote Control.
2. Connect another DENON component to the REMOTE CONTROL OUT jack of this player. This allows you to operate this
player and the connected component with the same Satellite Remote Control.
Selecting Progressive Scan (480p/576p or Interlaced 480i/576i) Playback
¡If your TV is compatible with progressive scanning (480p/576p), connect the TV to the COMPONENT VIDEO OUT jacks of
the DVD player and set PROGRESSIVE to ON in the display setting. Next, set your TV to the progressive scan mode.
Refer to page 28 for instructions on changing the display setting. P.SCAN will appear on the display of the unit.
¡If your TV is not compatible with progressive scanning, set PROGRESSIVE to OFF (refer to page 28). Make sure that P.SCAN
on the display of the unit lights off.
¡Use a commercially available adaptor if the video input jacks of your TV or monitor is the BNC type.
¡Progressive video signal will not be output from the COMPONENT VIDEO OUT while using the HDMI OUT jack.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (480i/576i) television signals.
The DCDi (Directional Correlational Deinterlacing) system of this DVD player produces smooth and
natural video images, even if really dynamic, by eliminating the jagged edges. *“DCDi” is a trademark
of Faroudja, a division of Genesis Microchip Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are
registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS,
Inc. All Rights Reserved.
– 12 –
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 13
The following shows examples of connections commonly used to connect the DVD player to TV and other
components.
If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
By hooking up the player to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience
with powerful and high-quality surrounding sound of a professional standard which can be heard in movie theaters.
Use a commercially available audio optical or coaxial digital cable (not included) for the audio connections.
NOTES:
• Be sure to turn off the power of all components in the system before connecting another component.
• Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Connection to an Audio System
Method 1
Method 2
AV amplifier with a built in decoder
(AV control center),
Dolby Digital decoder,
DTS decoder,
MD deck or DAT deck
Stereo system
AUDIO
Digital Audio Input
Jacks
Audio Input Jacks
Audio cable
(supplied)
DVD
Optical cable
(commercially
available)
AUDIO OUT
(analog)
or
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL OUT
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + AV amplifier with a built in decoder (AV control center), Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
NOTES (for Method 2 only):
• When using an AV amplifier with a built in decoder (AV control center), Dolby Digital, or DTS decoder as shown in the
Method 2, set DOLBY DIGITAL or DTS to BITSTREAM accordingly for audio output in the setup mode (refer to page 29).
Set it to PCM for the decoder that is not used currently. Playing back a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
• Set DOLBY DIGITAL or DTS to PCM for audio output in the setup mode for connecting to an MD deck or DAT deck (refer to
page 29).
• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
• When playing back a copyright-protected 96kHz PCM DVD, the digital sound will be down sampled at 48kHz, even if you set
LPCM SELECT to OFF (refer to page 29).
• Super Audio CD sound is not output from the DIGITAL OUT jacks.
Optical cable (commercially available)
• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 6 inches (15cm) or more when storing them.
• Use a cable which is 9.8 feet (3m) or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
– 13 –
EN
English
CONNECTIONS
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 14
CONNECTIONS
Connection to 5.1-channel Surround Sound System
Analog 5.1-channel audio signals can be output from the DVD player.
The multi-channel audio signals recorded in packed PCM and the multi-channel Super Audio CDs can be
played back when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.
Front speaker Center speaker
(left)
Front speaker
(right)
AUDIO
Subwoofer
Surround
speaker
(left)
AV amplifier
with
5.1-channel
audio input jacks
Surround
speaker
(right)
To 5.1-channel
Audio Input
Jacks
Speaker
Cable
(commercially
available)
DVD
5.1ch
AUDIO OUT
NOTES:
• For 5.1-channel connections, set ANALOG AUDIO to MULTI CHANNEL in the setup mode and adjust Speaker
Configuration, DELAY TIME and CHANNEL LEVEL settings (refer to page 30).
• You can enjoy high-quality analog sound by cutting off the video signal. Press the PURE DIRECT button on the front panel.
– 14 –
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 15
CONNECTIONS
Connection to a TV (for video)
Method 1
Good
picture
Method 2
Better
picture
VIDEO IN
S-VIDEO IN
Method 3
English
Basic
audio
Best picture
COMPONENT
VIDEO IN
TV
R
L
Audio
Cable
(supplied)
Video
Cable
(supplied)
and
S-Video
Cable
(commercially
available)
CR/PR
Y
CB/PB
Component
Video
Cable
(commercially
available)
or
or
DVD
AUDIO OUT
(analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Input Jacks
NOTES:
• Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
• S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to this unit’s S-Video output connector
using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE:
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
– 15 –
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 16
CONNECTIONS
Connection to a TV with an HDMI Compatible Port
A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (HighDefinition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other
sources, DVD-Video, and the multi-channel sound of DVD-Audio.
To HDMI Input
Connector
A display equipment with an HDMI compatible port
HDMI cable
(commercially available)
C Actual output modes by media
DVD-Video
DVD-Audio
DivX®
Audio CD
MP3/WMA
Super
Audio
CD
Audio Recording Format
Dolby Digital
DTS
LPCM
LPCM or PPCM
(with CPPM) *3 *5
LPCM or PPCM
(without CPPM)
Dolby Digital
MP3/MP2
MULTI-CH AREA *4
2CH AREA *4
CD AREA
HDMI AUDIO Setting
2 CHANNEL
MULTI CHANNEL
DOLBY DIGITAL/DTS Setting
DOLBY DIGITAL/DTS Setting
BITSTREAM *1
PCM
BITSTREAM *1
PCM *2
Dolby Digital
Dolby Digital
2channel PCM
Multi PCM
DTS
2channel PCM
DTS
Multi PCM
2channel PCM
2channel PCM
Multi PCM
Multi PCM
2channel PCM
2channel PCM
Multi PCM
Multi PCM
2channel PCM
2channel PCM
Multi PCM
Multi PCM
Dolby Digital
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
Dolby Digital
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
*1 If the connected equipment is not compatible with HDMI BITSTREAM, signals are output on PCM.
*2 If the connected equipment is not compatible with HDMI Multi PCM, signals are output on down mixed PCM.
*3 If the connected equipment is not compatible with HDMI ver. 1.0, signals are not output.
*4 Sounds recorded on the MULTI-CH/2CH AREA of Super Audio CDs are not output.
*5 Transfer of signal from DVD audio discs that are copyright-protected by CPPM is only possible if both devices are HDMI Ver.1.1 compatible.
This player is HDMI Ver.1.3 compatible.
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display
equipment (or an AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content Protection
System). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV equipment.
This player supports HDCP. Please read the operating instructions of your display equipment (or AV amplifier) for more
information.
*HDMI: High-Definition Multimedia Interface
NOTES:
• When using an HDMI-incompatible or HDCP-incompatible display equipment, the image will not be viewed properly.
• When the PURE DIRECT button on the front panel is turned on, not only HDMI images but sounds are not output (refer to
page 17).
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this player cannot be controlled by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may
be limited by the equipment that is connected.
• When playing a Super Audio CD with an HDMI connection, audio cannot be transferred beyond the CD layer. Make an analog connection for this.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with
equipment such as this, audio signals are not output from the HDMI output connector.
• When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable (commercially available), the signals are output in digital RGB.
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.”
Connecting the AC Cord
After you made all necessary connections, connect the AC cord to the AC inlet. Then connect the AC cord to
the AC outlet.
– 16 –
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 17
DISC PLAYBACK
DVD-V DVD-A
Super
Audio CD
CD
JPEG WMA
MP3
DivX®
Getting started
• Turn on the power of the TV, amplifier and any other components which are connected to the DVD player.
• Make sure the TV and audio receiver (commercially available) are set to the correct channel.
1 Press the POWER ON button.
• “P-ON” will appear briefly on the display panel.
2 Press the OPEN/CLOSE button
to open disc loading tray.
3 Place the disc in the tray, with the
label facing up.
4 Press the PLAY button.
• The tray will close automatically,
then playback will start from the first
chapter or track of the disc. If the playback does not
start automatically, press the PLAY button.
• When you play back the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title menu”
on page 18.
5 Press the STOP button to stop playback.
NOTES:
• A “prohibited icon” may appear at the top-right
corner on the TV screen during operation,
warning that a prohibited operation has been
encountered by the DVD player or the disc.
• With DVDs that use some titles for playback
program signals, playback may start from the second title,
or it may skip these titles.
• During the playback of two layered disc, pictures may stop
for a moment. This happens when the 1st layer switches to
the 2nd layer. This is not a malfunction.
• The operation may vary when you play back DVDs with
disc menu or DivX® video files. Refer to the manual accompanying the disc for details.
1 Press the PURE DIRECT button on the front panel to
output an analog audio signal only (no analog video
and HDMI signals will be output and the display will be
turned off). The higher quality sound will be achieved.
NOTES:
• When the buttons below are pressed, the pure direct mode
will be released.
OPEN/CLOSE button (on both the remote and the front panel),
SETUP or DISPLAY button (on the remote), ON/STANDBY or
PURE DIRECT button (on the front panel).
• The PURE DIRECT button will not function while displaying
the setup menu.
• If you turn on the pure direct mode while selecting HDMI
mode, both video and audio signals will not be output.
Brightness of the Front Panel Display
1 Press the DIMMER NTSC/PAL button on the front
panel to select the desired brightness of the front
panel display. (BRIGHT, DIMMER or OFF)
• The default setting is BRIGHT.
NOTES:
• The brightness of the front panel display can be adjusted
from the setup menu. Details are on page 31.
• When you turn on the power next time, the brightness of
the front panel display will be as set in setup menu.
TV TYPE
Select a suitable video system according to the format
of the TV you connected.
1 Stop playback.
2 Press the DIMMER NTSC/PAL button on the front
panel more than 3 seconds. The video system will be
displayed on the front panel display and TV screen.
MULTI
NTSC
PAL
3 Press the DIMMER NTSC/PAL button on the front
HDMI Setup
1 Press the HDMI button on the front panel to select
the HDMI output mode.
The output mode changes as follows every time
the HDMI button is pressed.
panel more than 3 seconds. The video system will
be displayed on the front panel display and TV
screen.
MULTI
NTSC
PAL
• The HDMI indicator on the front panel lights up when
HDMI output mode is on.
480P/576P
720P
1080
1080P
OFF
480P/576P (Default):
Video output from the HDMI OUT jack at 480p/576p.
720P: Video output from the HDMI OUT jack at 720p.
1080: Video output from the HDMI OUT jack at 1080i.
1080P: Video output from the HDMI OUT jack at 1080p.
OFF: No video output from the HDMI OUT connector.
NOTES:
• If it is left untouched for more than 5 seconds or any
other buttons are pressed, the unit will switch back to
the normal status.
NOTES:
• If the video system setting does not fit to the TV you connected, the picture will be distorted.
• If you turn off the unit, the video system will go back to the
one set for the TV TYPE on the display menu (refer to
page 28).
General Features
• Video and audio signals may distorted temporarily when
switching to/from the HDMI output mode.
DVD-V DVD-A DivX®
• Use a display equipment with an HDMI-compatible port.
®
DVD and DivX video file may contain menus to navigate
• The HDMI indicator on the front panel flashes when you
the disc and access special features. Press the appropriselect the HDMI output mode but there is no HDMI cable.
• If you turn on the pure direct mode, both video and audio
ate Numeric buttons or use the Cursor buttons (K / L /
signals thru the HDMI output will be cut off (press the
s / B) to highlight your selection in the DVD main menu
PURE DIRECT button again to recover).
and press the ENTER button to confirm.
• You can check the HDMI connection status by pressing the
NOTES:
DISPLAY button during playback with the HDMI output
• Unless otherwise stated, all operations described in this
mode (refer to page 25).
manual are based on remote control use. Some operations
• If the TV is not compatible with newly selected HDMI output
can be carried out using the menu bar on the TV screen.
mode, the actual output mode will be kept the one before
• The Numeric buttons are invalid in menu of DivX® video
changing the selection. When this occurs, the newly selectfile.
ed mode will appear on the front panel display (see page
11) while the actual output resolution will be indicated by
performing the on-screen display as described in NOTE
OFR HDMI DISPLAY on page 25.
• Actual output signals for each HDMI mode vary with DVD
the compatibility of the connected display device.
• You cannot select the HDMI output mode when the setup
menu is on the TV screen.
EN
– 17 –
English
Pure Direct Mode
Basic Playback
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 18
DISC PLAYBACK
Disc Menu
PAGE SELECTION
DVD-V
1 Press the MENU button.
• The DVD main menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 If disc menu is available on the disc, audio language,
subtitle options, chapters for the title and other
options will appear for selection.
4 Press the Cursor buttons (K / L/ s / B) to select an
item, and the ENTER button to confirm the selection.
Title Menu
DVD-V DVD-A
1 Press the TOP MENU button.
1/12
+ or – button to select a desired
page number to be displayed.
PLAYBACK OF THE BONUS GROUP
Some discs are recorded with the Bonus Group that can be
played back by entering a password. Refer to the disc jackets.
1 In stop mode, press the
GROUP button to open the
group search screen.
2 Press the Numeric buttons to
select a bonus group number.
DVD-AUDIO
BONUS GROUP
Please enter a 4-digit password.
1
• The password popup window appears.
3 Press the Numeric buttons to enter
• The title menu will appear.
2 If the feature is not available,
Some DVD-Audio discs that include still
images feature a selection of images
you can choose from.
1 During playback, press the PAGE
the 4-digit password.
symbol may
appear on the TV screen.
3 Press the Cursor buttons (K / L / s / B) to select an
item, and the ENTER button to confirm the selection.
• When the correct password is entered, playback starts
from the top of the bonus group.
NOTES:
• In some cases, the password window is displayed on the
menu screen. Follow the instructions given on the screen.
• Once the password is entered, playback will be repeated
until the disc is removed from the disc tray.
• Playback will begin at the selected title.
DivX®
Still / Pause
1 Press the Cursor buttons (K or L) to
choose a track, then press the PLAY or ENTER
button.
2 Press the TOP MENU button.
DVD-V DVD-A
• The title menu will appear.
CD
JPEG
Super
Audio CD
WMA
MP3
DivX®
1 During playback, press
3 If the title menu is available on the file, audio lan-
guage, subtitle options, chapter for the title and
other options will appear for selection.
4 Press the Cursor buttons (K / L / s / B) to select
an item, and the ENTER button to confirm the
selection.
the STILL/PAUSE button.
2 To continue playback, press the PLAY button.
NOTE:
• Set STILL MODE to FIELD on the display menu if pictures in
the pause mode are blurred (refer to page 28).
CALLING UP A MENU SCREEN DURING PLAYBACK
Resume
DVD-V DVD-A DivX
®
DVD-V DVD-A
• Press the MENU button to call up the DVD main menu (DVD-V).
• Press the TOP MENU button to call up the title menu.
NOTES:
• Contents of menus and corresponding menu operations
may vary among discs. Refer to the manual accompanying
the disc for details.
• During playback or resume stop state on the DivX® video
file, it is possible to call up a menu.
F
• Playback will pause and sound will
be muted.
CD
JPEG
Super
Audio CD
WMA
MP3
DivX®
1 During playback, press the
STOP button.
Resume ON
• Resume message will appear on
the TV screen.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
2 Press the PLAY button, play-
back will resume from the point at <Example: DVD>
which playback was stopped.
DVD Audio Playback
• To cancel resume, press the STOP button again.
DVD-A
PLAYBACK OF ALL GROUPS
1 In stop mode, press the MODE
button.
NOTES:
• For MP3, JPEG or WMA, playback will resume from the
beginning of the current track.
• The resume information will be saved even when the
power is turned off.
ALL GROUP
DVD-AUDIO
TOTAL 2:05:55
Fast Forward / Reverse Search
• The all group screen appears.
2 Press the PLAY button to
All Group Playback
--no indication--
DVD-V DVD-A
begin playback.
NOTE:
CD
Super
Audio CD
WMA
• “A-PLAY” is displayed in the front
panel display at step 1 .
MP3
DivX®
1 During playback, press the h or g button repeat-
edly to select a desired forward or reverse speed.
PLAYBACK FROM A DESIRED GROUP
1 During playback or in the stop
mode, press the GROUP button.
2 Press the Numeric buttons to
select a group.
• For DVDs, fast forward or reverse search speed is different
depending on the disc. The approximate speed is 1 (x2),
2(x8), 3 (x20), 4 (x50), and 5 (x100).
1/12
Button
• The group will be located and playback will start.
1
2
3
4
5
1
2
3
4
5
Button
– 18 –
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 19
DISC PLAYBACK
4 To exit zoom mode, press the ZOOM button.
NOTES:
•
•
•
•
2 To return to normal playback, press the PLAY button.
NOTE:
• For some DivX® files, Fast Forward/Reverse Search
may not function.
Zoom function does not work while disc menu is shown.
x4 zoom is not available on some discs.
Navigation screen is not available on JPEG.
You cannot pan through the zoomed picture on some
JPEG files.
Title / Chapter Search
Slow Forward / Slow Reverse
DVD-V DivX®
DVD-V DVD-A DivX
®
only Moving picture
1 During playback, press the STILL/PAUSE button.
D Button
2 Press the h or g button.
1
• Slow motion playback will begin and
sound will be muted.
3 Press the h or g button repeat-
edly to select a desired speed.
BY USING THE SEARCH MODE BUTTON
1 Press the SEARCH MODE button
repeatedly until the chapter
search or the title search display
appears during playback.
2 Enter the desired chapter/title
number with the Numeric buttons.
/29
2
• Slow forward or reverse speed is different depending on the disc. The
approximate speed is 1 (1/16), 2 (1/8),
and 3 (1/2).
BY USING THE SKIP BUTTONS H G
3
4 To return to normal playback, press
the PLAY button.
NOTES:
• On DVDs set STILL MODE to FIELD on the display
menu if pictures in the slow playback mode are blurred
(refer to page 28).
• Only Slow Forward is available when playing back discs
with DivX® files.
During playback, press the SKIP G button to move to the next
chapter. Press it repeatedly to skip to subsequent chapters. Press
the SKIP H button to go back to the beginning of the current
chapter. Press it repeatedly to go to the previous chapters.
• Chapter number will appear briefly on the front panel display during playback DVD. Track number keeps being displayed during playback DivX® video file.
• If the SKIP H or G button is pressed while the playback
is paused, the playback after skipping to the next chapter
will be also paused.
NOTES:
Step by Step Playback
• Depending on the disc being played, the Numeric buttons
can be used to search for a desired chapter by entering
the chapter number directly. Refer to the manual accompanying the disc.
• The SKIP H and G buttons are not available when
playback is stopped.
• A disc that does not contain chapters within titles, the
SKIP H and G buttons change the titles.
DVD-V DVD-A DivX
®
only Moving picture
1 During playback, press the
STILL/PAUSE button.
F
• Playback will pause and sound
will be muted.
2 The disc advances frame by
Track Search
frame each time the STILL/PAUSE button is pressed.
3 To exit step by step playback, press the PLAY button.
DVD-A
NOTE:
• On DVDs, set STILL MODE to FIELD on the display menu
if pictures in the pause mode are blurred (refer to page 28).
CD
Super
Audio CD
MP3
WMA
JPEG
DivX®
There are two ways to begin playback a disc at a specific track.
Zoom
BY USING THE SEARCH MODE BUTTON
DVD-V DVD-A JPEG
DivX®
only Moving picture
This function allows you to enlarge the video image and to
pan through the zoomed image.
1 Press the ZOOM button during playback.
• Playback will continue.
2 Press the ZOOM button repeatedly to select a
desired zoom factor: x2, x4 or off.
• Only x2 zoom is available on JPEG and DivX®.
x2
x4
3 Use the Cursor buttons (K / L / s / B) to move the
zoomed picture across the screen.
1 Press the SEARCH MODE button.
__/ 15
• The track search display appears.
2 Within 30 seconds, select a
desired track number using the Numeric buttons.
• For the disc with less than 10 tracks, press the track
number directly.
• For discs with 10 or more but less than 100 tracks, to
play back a single-digit track, press 0 first, then the
track number (e.g. for track 3, press 0, 3). To play back
a double-digit track, press the track number.
• For discs with 100 or more tracks, to play back a single- or
a double-digit track, press 0 first, then the track number
(e.g. for track 3, press 0, 0, 3, and for track 26, press 0, 2,
6). To play back a triple-digit track, press the track number.
• Press the CLEAR button to erase the incorrect input.
NOTE:
• The +10 button can also bring up the track search display except for the disc with less than 10 tracks. For
such a disc, track search can be done by just pressing
the track number.
BY USING THE SKIP BUTTONS H G
During playback, press the SKIP G button to move to the
next track. Press it repeatedly to skip to subsequent tracks.
Press the SKIP H button to go back to the beginning of the
current track. Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the front panel display.
• If the SKIP H or G button is pressed while the playback
is paused, the playback will be paused again after skipping
to the next track.
– 19 –
EN
English
• For Audio CDs, Super Audio CDs, MP3, WMA and DivX®,
the approximate speed is 1 (x2), 2 (x8), and 3 (x30).
• For Audio CDs, Super Audio CDs, MP3 and WMA, sound will
be output at any speed of fast forward and reverse search.
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 20
DISC PLAYBACK
NOTES:
• The SKIP H and G buttons are not available when
playback is stopped.
• When the SKIP H, G button is pressed during playback DivX® video file, and if it does not change previous/next track, press the MENU button.
NOTES:
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
Time Search
DVD-V DVD-A
CD
Super
Audio CD
REPEAT TRACK / GROUP / ALL
DivX®
1 Press the SEARCH MODE button until the time
search screen appears on the TV screen.
2 Within 30 seconds, enter a
desired disc time point on the
disc with the Numeric buttons.
•
-:--:--
The repeat mode changes as described below every time
you press the button.
1:23:45
• Playback will start at the specified time.
• For Time Search, “0” appears automatically when there
is no need to enter a number. For example,
“0:0_:_ _” appears in the time search screen if the total
time of the disc is less than 10 minutes.
OFF
(repeat off)
TRACK
(current track repeat)
• In the track repeat, the repeat setting will be cleared
when moving to other track.
• Repeat playback does not function during A-B repeat
playback.
NOTE:
• For some DivX® files, Time Search may not function.
DVD-A
Marker Setup Screen
CD
Super
Audio CD
You can use markers to memorize your favorite places on a disc.
1 Press the SEARCH MODE
ALL
(entire disc repeat)
NOTES:
3 Press the CLEAR button to erase an incorrect input.
DVD-V DVD-A
Super
Audio CD
CD
To activate Repeat function, press the REPEAT button during
playback.
OFF
(repeat off)
MP3
TRACK
(current track
repeat)
JPEG WMA
DivX®
GROUP
ALL
(entire disc
repeat)
(current folder
repeat)
1 2 3 4 5 6 7 8 9 10 AC
button repeatedly until the dis-- --:--:-play screen and Markers
appear during playback.
2 Press the Cursor buttons (s or B) to select the
number of the marker (1-10) and ensure that “_ : _
_ : _ _” appears in the display.
3 When the disc reaches the point you want to
remember, press the ENTER button.
NOTES:
• In the track or group repeat, the repeat setting will be
cleared when moving to other track or group.
• When the DivX® media file change to DivX® video file
while the repeat setting is done, the repeat setting will
be cleared.
• For DVD-Audio, ALL repeat is effective only when all
groups are being played back.
A-B REPEAT
• The title or track and elapsed playback time will appear
in the TV screen.
DVD-V DVD-A
4 To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
Cursor buttons (s or B) button to choose a
desired marker, then press the ENTER button.
5 Press the SEARCH MODE or RETURN button to exit.
NOTES:
• Opening the disc tray, turning off the power or selecting
AC at step 2 and pressing the ENTER button will
erase all Markers.
• To clear a marker, using the Cursor buttons (s or B),
position the cursor on to the marker number to be
cleared and press the CLEAR button.
• You can mark up to 10 points.
1 Press the A-B REPEAT button
at your chosen starting point.
•
DivX®
A-
A-B
again at your chosen end point.
•
A-B appears briefly on the
TV screen, and the repeat sequence begins.
3 To exit the sequence, press
the A-B REPEAT button.
OFF
NOTES:
• The REPEAT button is available only during playback.
REPEAT TITLE / CHAPTER
DVD-V DivX®
To activate Repeat function, press the REPEAT button during
playback.
The repeat mode changes as described below every time
you press the button.
OFF
(repeat off)
Super
Audio CD
A- appears briefly on the TV
screen.
2 Press the A-B REPEAT button
Repeat
•
CD
• The A-B Repeat section can only be set within the current title (for DVDs or DivX® Video files), or current track
(for DVD-Audio, Audio CD, Super Audio CD and disc
with DivX® media files.).
• A-B Repeat is not available with some scenes on DVD.
• To cancel the A point which was set, press the CLEAR
button.
• A-B Repeat playback does not function during title,
chapter, track, group or all repeat playback.
• For some DivX® files, A-B Repeat playback may not
function.
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
– 20 –
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 21
DISC PLAYBACK
• Press the STOP button once and then the PLAY button
again, playback will restart from the point where the STOP
button was pressed. (Program continued.)
• Press the STOP button twice and then the PLAY button
again, playback will restart from the first track in the usual
way. Your program is still stored until either the disc tray is
open or power is turned off.
• Up to 99 tracks can be entered.
• To erase tracks in the program all together, select ALL
CLEAR at the bottom of the list at step 2 . And, “A-CLEAr”
is displayed on the front panel display at that time.
• To repeat the current track in the program, press the
REPEAT button repeatedly until
TRACK appears during
playback. To repeat the entire program press the REPEAT
button repeatedly until
ALL appears during playback.
• If eight or more tracks were set in a program, use the
SKIP H or G button to see all the tracks.
• When selecting the folder:
–Press the Cursor button (B) when you want to go to
the next hierarchy.
–Press the Cursor button ({) when you want to go back
to the previous hierarchy (except for the top hierarchy).
• Even if an inserted disc contains mixed MP3, JPEG
and WMA files, Program function allows 99 tracks in
combination of MP3, JPEG and WMA files.
• The front panel display has blinked while setting the
program playback.
• “F-*** ” is displayed in the front panel display while selecting the group (folder). ( *** is group (folder) number.)
DVD-A
1 In stop mode, press the MODE
PROGRAM
button repeatedly until the program screen appears.
DVD-AUDIO
TOTAL 0:00:00
1 1:02:25
2 1:03:30
ALL CLEAR
G
G
• The group selection screen will
appear.
1/1
1/1
G
1 1:02:25
2 Press the Cursor buttons
(▲ or ▼) to select a group, then press the ENTER
button.
• The track selection screen will be displayed.
• It takes approximately five seconds until the track
selection screen appears.
3 Press the Cursor buttons (▲ or ▼) to select a
track, then press the ENTER button.
• Press the CLEAR button to erase the most recently
entered track.
• Press the Cursor button (s) button to go back to the
group selection screen from the track selection screen.
4 Press the PLAY button to play back the pro-
grammed tracks.
Super
Audio CD
CD
1 In stop mode, press the MODE button.
• The program screen will appear.
2 Press the Cursor buttons
PROGRAM
CD-DA
(▲ or ▼) to select a track, then
press the ENTER button.
• Press the CLEAR button to erase
the most recently entered track.
3 Press the PLAY button to start
Random Playback
TOTAL 0:03:30
T
T
T
T
T
T
1
2
3
4
5
6
7
T
1 3:30
T
3:30
4:30
5:00
3:10
5:10
1:30
2:30
1/2
T
1 3:30
This function shuffles the playback order of tracks instead of
playback in the original sequence.
1/1
DVD-A
1 In stop mode, press the
RANDOM button.
<Example: CD>
RANDOM
• The random screen will appear.
programmed playback.
2 Press the Cursor buttons (▲ or
MP3
JPEG
▼) to select a desired group to
play back randomly, then press
the ENTER or PLAY button.
WMA
1 In stop mode, press the MODE
button.
• The program screen will appear.
2 Press the Cursor buttons (K or
L) to select a group, then press
the ENTER button.
• A track selection screen appears.
3 Press the Cursor buttons (K or
L) to select a track, then press
the ENTER button to save it in a
program.
• Press the CLEAR button to erase
the most recently entered track.
• The programmed track is displayed in the right-hand screen.
• If the entire program cannot be displayed on the screen, “L” appears.
• Pressing the Cursor button (s)
will show a list of folders that
belong to the hierarchy which is
one-level higher than the currently
selected folder.
MY COLLECTION
ABC
CD
DEF
GHI
ALL CLEAR
Super
Audio CD
MP3
1 In stop mode, press the
1/1
ABC
RANDOM button.
• The random screen will appear.
2 Press the PLAY button to start
ABC
DEF
GHI
JKL
MNO
ALL CLEAR
ALL
1/1
JPEG
WMA
RANDOM
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
<Example: CD>
PROGRAM
ABC
2/2
G
NOTES:
1/1
DEF
DEF
GHI
JKL
MNO
ALL CLEAR
ALL
1 0:44:44
2 0:03:26
G
random playback.
PROGRAM
2/2
G
G
• Random playback will start.
PROGRAM
1/1
DVD-AUDIO
DEF
1/1
DEF
4 Press the PLAY button to start programmed playback.
• Press the RETURN button, and the stop screen will
show up with the program contents in memory.
– 21 –
• To repeat the current track in the random selection,
press the REPEAT button repeatedly until
TRACK
appears during playback. To repeat the entire random
selection press the REPEAT button repeatedly until
ALL appears during playback.
• You cannot go back to the previous track during random playback.
• For a disc containing mixed MP3, JPEG and WMA
files, random playback of those files will be performed.
• “SHUFFLE” is displayed on the front panel display at
step 1 .
EN
English
NOTES:
Program Playback
This function allows you to program a playback order of
DVD-Audio, Audio CD, Super Audio CD, MP3, JPEG, or
WMA in a desired sequence.
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 22
DISC PLAYBACK
MP3 / JPEG / WMA Playback
MP3
JPEG
WMA
When a DVD-R/RW or CD-R/RW disc with MP3, JPEG or
WMA files is inserted in the DVD player, the file list will
appear on display. The number of tracks is also displayed on
the front panel.
1 Press the Cursor buttons (K or L) to select the
desired group (folder) or track.
• To return to the previous screen, press the Cursor button (s).
• If a group (folder) is selected, press the Cursor button
(B) or ENTER button to go on to the track selection
screen. Press the Cursor buttons (K or L) to choose a
track, then press the PLAY or ENTER button.
• If a track is selected, press the PLAY or ENTER button
to start playing back tracks. The selected track and the
subsequent tracks will be played back.
• When selecting the folders
B) when you want to go to
–Press the Cursor button (B
the next hierarchy.
–Press the Cursor button ({) when you want to go back
to the previous hierarchy (except for the top hierarchy).
• Press the TOP MENU button to return to the first item.
2 Press the STOP button to stop playback.
NOTES:
• Folders are known as Groups; files are known as Tracks.
• A symbol of
is shown on the top of the group name.
• A symbol of
is shown on the top of MP3 files.
• A symbol of
is shown on the top of JPEG files.
• A symbol of
is shown on the top of WMA files.
• Maximum of 255 folders can be recognized.
• Maximum of 999 files can be recognized.
• Up to 8 hierarchies can be recognized.
• If the track extends beyond the scope of screen, a
down arrow “L” appears, indicating that the user can
view another part on the previous page. The current
page number and the number of total pages are shown
on the left of the down arrow “L”.
• If no MP3, JPEG or WMA files are found in the group,
the group is not displayed.
• The DVD player can reproduce data recorded as per
ISO 9660 Level 1, Level 2 or Joliet on the disc.
• It can also run a disc on which data is recorded in a
multi-session.
• For more details of recording systems, refer to the instruction manual for the DVD-R/RW / CD-R/RW drive or the writing software.
• For MP3 and WMA files recorded in Variable Bit Rate
(VBR), the unit may not display the actual elapsed time.
This player recommends the use of files recorded at the following specifications:
Applicable MP3 file
Remarks
• It is prohibited to record
Sampling
44.1kHz
MP3 sound on a digital
device when the connection
frequency
48kHz
is made digitally.
•
MP3 files recorded at fixed
MPEG1
Type
bit rate of 32 kbps or higher
audio layer 3
are recommended.
Applicable JPEG file
Remarks
Upper limit:
• A JPEG image that extends
6300x5100 dots beyond the screen is
Size of
Lower limit:
reduced so that it will be
image
32x32 dots
displayed within the screen.
Information on MP3, JPEG and WMA discs
• This DVD player can play back images and sounds from data recorded in MP3 and JPEG formats on DVD-R/RW or CD-R/RW discs.
• A file with an extension of “.mp3 (MP3)” is called an MP3 file.
• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a JPEG file.
The DVD player can run an image file conforming to the
Exif specification. Exif is a file format, Exchangeable
Image File format established by Japanese Electronic
Industry Development Association (JEIDA).
• A file with an extension of “.wma (WMA)” is called a WMA file.
• Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)” and “.jpeg (JPEG)” or “.wma (WMA)” will not be
listed on the MP3, JPEG or WMA menu.
• If the file is not recorded in MP3, JPEG or WMA format,
noise may be produced even if the file extension is either
“.mp3 (MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma (WMA)”.
• The name of group and track can be displayed up to 25 characters. Unrecognizable characters will be replaced with asterisks. The ninth and deeper hierarchies cannot be displayed.
• Unplayable groups or tracks may be displayed depending
on the recording conditions.
• If the TOP MENU button is pressed when a file list is displayed, the first item will be highlighted.
Kodak Picture CD
The DVD player can also run JPEG files stored on Kodak
Picture CDs. You can enjoy picture images on the television
set by playing back the Picture CDs.
This unit confirms to ver. 7.0 of Kodak Picture CD.
For details of Kodak Picture CD, contact a shop that provide
developing service of Kodak Inc.
1 When Kodak Picture CD is inserted in the DVD
player, Kodak Picture CD menu appear automatically on the TV screen.
• If all menu items cannot be
displayed on the screen
Picture1
Picture2
Picture3
scope, “G” appears at the
right bottom of the screen,
indicating that the user can
Picture4
Picture5
Picture6
view remaining items on the
next page. “H” appears, it
1/32
indicates that the user can
view other items on the preCurrent track number /
the number of total tracks
vious page. The track number of the currently highlighted item and the total tracks
are shown at the center bottom of the screen.
• If “G” is shown at the right bottom, use the SKIP G
button to view the next page. If “H” is shown at the
left bottom, use the SKIP H button to view the previous page.
• It may take some time until all menu items are displayed on the menu screen.
2 Press the Cursor buttons (K / L / s / B), select a
desired track to be played back, then press the
PLAY or ENTER button.
• If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to the next
one in turn.
3 Press the STOP button to stop playback.
NOTES on JPEG and Kodak Picture CD:
Applicable WMA file
Sampling
44.1kHz
frequency
48kHz
Bit rate
Type
Remarks
• Those frequencies are
applicable to WMA version 9.
• Ensure that the copyright
48–192kbps
function is set to off when
preparing a WMA disc.
• A prohibition “disable” symbol will appear if the user
attempts to run a non-reproWMA version 9 ducible file such as copyright-protected.
• Recorded in Multi-channel format cannot be played back.
– 22 –
• A track is displayed for 5 or 10 seconds and then the
next track is displayed.
• Every press on the ANGLE button will turn the image
clockwise by 90 degrees when an image is displayed.
• To change the size of the playback image, press the
MODE button twice. The size change mode appears on
top of the TV screen during playback. Then press the
Cursor buttons (s or B) or ENTER button to switch
between NORMAL (100%) and SMALL (95%).
• Progressive JPEGs (JPEG files saved in the progressive format) will not be played back on this DVD player.
• High resolution JPEG files take longer to be displayed.
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 23
• The size change mode may have no effect on some
files (e.g. files with a small picture size).
• In stop mode, press the MENU button. Kodak Picture
CD menu appears.
• Although DivX® logo has been obtained for this player, it
may not be able to play back some data, depending on
the disc characteristics, bit rates, or audio format settings, etc.
• Use the software recognized by DivX®, Inc. when you
make DivX® files.
• When using tools or utilities to make up DivX® files, read
their instruction manual beforehand.
• A DivX® file whose file size exceeds 2GB cannot be
played back.
• If a large-sized DivX® file is selected, it may take a while
to start the playback (over 20 seconds sometimes).
• Constant bit rate of image between 500 kbps and 4,000
kbps is recommended if you make DivX® files on a CDR/RW.
• If DivX® files written on CD discs cannot be played back,
rewrite them on a DVD disc and try to play back.
• For more information for DivX®, please visit:
http://www.divx.com
• If you insert a DVD-R/RW or CD-R/RW with DivX® files
that are mixed with MP3, JPEG, or WMA files, the
Playback Media Selection screen will be displayed.
Please select Video and proceed to step 1 .
NOTES on WMA:
• The DVD player can reproduce data recorded as ISO
9660 level 2 with 31 characters file name included
punctuation marks. The name of file can be displayed
up to 25 characters.
• Maximum of 8 subfolders can be recognized.
• It can also be displayed tag information of WMA at
least 64 characters.
• A file with an extension of Joliet as Unicode format in
up to 64 characters can be recognized.
• This unit cannot play back copyright protected WMA
files.
DivX® Playback
DivX®
This DVD player can play back DVD-R/RW and CD-R/RW
discs recorded in DivX® format. When a DVD-R/RW or CDR/RW with DivX® files is inserted in the DVD player, the file
list will appear automatically on the TV screen. The number
of tracks will be also displayed on the front panel.
1 Press the Cursor buttons (K or L) to select the
Please select the media to play back.
Video
Audio & Pictures
desired group (folder) or track.
• To return to the previous screen, press the Cursor button (s).
• If a group (folder) is selected, press the Cursor button
(B) or ENTER button to go on to the track selection
screen. Press the Cursor buttons (K or L) to choose a
track, then press the PLAY or ENTER button.
• If a track is selected, press the PLAY or ENTER button
to start playing back tracks. The selected track and the
subsequent tracks will be played back.
• When selecting the folders
B) when you want to go to
–Press the Cursor button (B
the next hierarchy.
–Press the Cursor button ({) when you want to go back
to the previous hierarchy (except for the top hierarchy).
• Press the TOP MENU button to return to the first item.
2 Press the STOP button to stop playback.
NOTES:
• DivX® is a codec (compression / decompression) that
can compress images to a very small amount of data.
The software can compress video data from almost any
sources to the size that can be sent on the Internet
without compromising visual quality of the images.
• A file with an extension of “.avi” or “.divx” is called a
DivX® file. All files with the “.avi” extension are recognized as MPEG 4.
• Files with extension other than “.avi” and “.divx” will not
be listed on the DivX® menu. However, unplayable
groups or tracks may be displayed, depending on the
recording conditions.
• Even if the file has an extension of either “.avi” or
“.divx”, this player cannot play it back if it is recorded in
the format other than DivX®.
• Folders are known as Groups; files are known as tracks.
• A symbol of
is shown on the top of DivX® file.
• Maximum of 255 folders can be recognized.
• Maximum of 999 files can be recognized.
• If the track extends beyond the scope of screen, a
down arrow “L” appears, indicating that the user can
view another part on the previous page. The current
page number and the number of total pages are shown
on the left of the down arrow “L”.
• The name of group and track can be displayed up to 25
characters. Unrecognizable characters will be replaced
with asterisks. The ninth and deeper hierarchies cannot
be displayed.
• You can play back the disc recorded in multi-session.
• Playback will be paused if the file list is displayed during
the playback.
• It may take a while for audio and images to be output
after you inserted a disc and pressed the PLAY button.
• When playing back the files recorded in high bit rates,
the images can be interrupted on some occasions.
• Press the TOP MENU button to call up the Playback
Media Selection screen in stop mode.
• If you select Audio & Pictures, instead of Video on the
Playback Media Selection screen, the DVD player can
play back MP3/JPEG/WMA files. Refer to page 22 for
details.
This player recommends the use of files recorded at the
following specifi cations:
Applicable DivX® file
Remarks
Plays® all versions of
Playable
DivX video (including • They are recognized
Codec of
DivX® 6) with standard
as MPEG 4.
AVI files
playback of DivX®
media files.
Maximum
720 x 480 @30fps
size of image 720 x 576 @25fps
• It is prohibited to
record MP3 sound
Sampling
on a digital device
8kHz - 48kHz
frequency
when the connection
of audio
is made digitally.
Audio type
– 23 –
MPEG1 audio layer 3
(MP3) MPEG1 audio
layer 2 Dolby Digital
• MP3 files recorded
at fixed bit rate of
32kbps or higher
are recommended.
EN
English
DISC PLAYBACK
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 24
DISC PLAYBACK
DivX® Subtitle
DVD-A
DivX
®
The subtitle created by the user can be displayed during
DivX® media file playback.
1 After select the DivX® media file, the SUBTITLE LIST
will appear except when the “DivX SUBTITLE” setting
is “OFF”. Refer to “Language Setting” on page 28.
SUBTITLE LIST
FILE :
fi le name1
[OFF]
[ASS]
[SMI]
[SRT]
[SSA]
[SUB]
[TXT]
FILE LIST : MENU
2 Press the Cursor buttons (K or L) to select the
desired extension you want to display, then press
the ENTER button. DivX® media file with the subtitle starts playback. The subtitle cannot be displayed when the setting is “OFF”.
• If there is more than one extension, the extension selection appears in the SUBTITLE LIST.
NOTES:
• DivX® subtitle can only be displayed according to the
same name with an extension of the DivX® file name.
• Files whose extension is other than “.ASS”, “.ass”, “.SMI”,
“.smi”, “.SRT”, “.srt”, “.SSA”, “.ssa”, “.SUB”, “.sub”, “.TXT”
and “.txt” will not be listed in the SUBTITLE LIST.
• This unit cannot be recognized if the DivX® media file
and its subtitle file are not in the one folder.
• The subtitle may not be displayed if the file size is too large.
• To change the subtitle, refer to “Subtitle Language” on
page 26 if multiple subtitles are available.
• The subtitle cannot display if the on-screen information
is displayed.
• If “DivX SUBTITLE” is set to “OFF” in LANGUAGE
menu, the SUBTITLE LIST will not be displayed even if
you select a DivX® media file with created subtitle.
• Unrecognizable characters will be replaced with asterisks.
• DivX® subtitle function is invalid to DivX® video file.
• Some files whose extension is “.SUB”, “.sub”, “.TXT”
and “.txt” may not be displayed.
Changing the On-Screen Display
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
DVD-V
1 Press the DISPLAY button
during playback.
9/49
0:00:00 -0:03:30
• Current chapter number/total
chapters, elapsed time and
remaining time of the current chapter, and current playback status will be displayed.
2 Press the DISPLAY button again.
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
3 Press the DISPLAY button
again.
IIIIIII
T
L1
• The bit rate (the amount of
video data currently being read)
and current playback status will be displayed.
• Current repeat setting appears on the right side of the
display bar only when the repeat setting is active.
( C: Chapter repeat/ T: Title repeat/A B: A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is played back. L1: Layer 1 is played back.)
4 Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 25.)
5 Press the DISPLAY button again to exit.
1 Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current playback status will be displayed.
2 Press the DISPLAY button again.
• Current group number/total groups, elapsed time and
remaining time of the current group, and current playback status will be displayed.
3 Press the DISPLAY button again.
• The bit rate and current playback
T L1
IIIIIII
status will be displayed.
• Current repeat setting appears
on the right side of the display bar only when the
repeat setting is active.
( T: Track repeat/ G: Group repeat/A B: A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being played back.)
4 Press the DISPLAY button again.
• During all group, program or random playback, each
playback status will be displayed when you press the
DISPLAY button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI output
mode. (Refer to NOTE FOR HDMI DISPLAY on page 25.)
5 Press the DISPLAY button again to exit.
CD
Super
Audio CD
1 Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current playback status will be displayed.
• Current repeat setting appears on the right side of the
display bar only when the Repeat setting is active.
( T: Track repeat/ A: All tracks repeat/A B: A-B repeat)
2 Press the DISPLAY button again.
• Current track number/total tracks, elapsed time and
remaining time of the entire disc, and current playback
status will be displayed.
• Current repeat setting appears on the right side of the
display bar only when the Repeat setting is active.
( T: Track repeat/ A: All tracks repeat/A B: A-B repeat)
• When you are playing back a disc in program or random
mode,
PROGRAM (or RANDOM) will be displayed.
3 Press the DISPLAY button again.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI output mode. (Refer to NOTE FOR HDMI DISPLAY on page 25.)
4 Press the DISPLAY button again to exit.
MP3
1 Press the DISPLAY button
during playback.
JPEG
TRACK 01
• Current file name will be displayed.
<Example: MP3>
2 Press the DISPLAY button again.
TR 1/36 0:01:15
T
• Current track number/total
tracks and elapsed time (MP3)
will be displayed.
• Current repeat setting appears only when the Repeat
setting is active.
( T: Track repeat/ A: All (disc) repeat/ G: Group repeat).
• When you are playing back a disc with MP3 or JPEG
files in program or random mode,
PROGRAM (or
RANDOM) will be displayed.
3 Press the DISPLAY button again.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI output mode. (Refer to NOTE FOR HDMI DISPLAY on page 25.)
4 Press the DISPLAY button again to exit.
– 24 –
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 25
DISC PLAYBACK
WMA
during playback.
• The displayed HDMI status
VIDEO INFO. : YCbCr/1080i
are as follows:
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
1. Information for image output/Resolution of image
2. Sound output format
3. Maximum number of audio channels that can be
accepted by the connected equipment
TRACK 01
• Current file name will be displayed.
2 Press the DISPLAY button
again.
TITLE NAME
• Title name based on tag information of currently played-back
file will be displayed.
Slide Show Mode
3 Press the DISPLAY button
again.
ARTIST NAME
JPEG
• Artist name based on tag information of currently played-back
file will be displayed.
4 Press the DISPLAY button
again.
English
1 Press the DISPLAY button
6 Press the DISPLAY button again to exit.
NOTE FOR HDMI DISPLAY:
TR
1/36 0:01:15
T
• Current track number/total
tracks and elapsed time will be
displayed.
• Current repeat setting appears only when the Repeat
setting is active.
( T: Track repeat/ A: All (disc) repeat/ G: Group
(folder) repeat).
• When you are playing back a disc in program or random mode,
PROGRAM (or RANDOM) will be displayed.
5 Press the DISPLAY button again.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
this page.)
6 Press the DISPLAY button again to exit.
You can switch to the slide show mode during playback.
1 Press the MODE button during playback.
• The slide show mode screen will appear.
• You cannot change to the slide show mode in stop mode
or from the file list screen or the Picture CD menu screen.
2 Press the ENTER button.
• The slide show mode will change.
CUT IN/OUT: The entire image appears in one time.
FADE IN/OUT: The image appears and disappears
gradually.
3 Press the MODE button to exit.
Dialog Speed
DVD-V DVD-A
only Moving picture
Available only on discs recorded in the Dolby Digital format,
Dialog Speed plays back in slightly faster or slower speed
while keeping the sound quality as in the normal playback.
1 During playback, press the
MODE button repeatedly until
the Dialog Speed setting
appears.
NOTE:
• If the file does not contain tag information, NOT AVAILABLE will be displayed.
DivX®
1 Press the DISPLAY button.
File Name
• Current file name will be displayed.
2 Press the DISPLAY button.
• Current track number/total
10/15 0:01:15 -0:05:56 T
tracks and elapsed time will be
displayed.
• During playback DivX® video
file, “--:--:--” is displayed at elapsed/remain time.
• Current repeat setting appears only when the Repeat
setting is active.
DivX® media file: ( T: Track repeat / A: All(disc)
repeat/ G: Group repeat /
A B: A-B repeat)
DivX® video file: ( T: Title repeat / C: Chapter
repeat / A B: A-B repeat)
3 Press the DISPLAY button.
10/15 0:01:15 -0:05:56 C
• Current chapter number/total
Chapters, elapsed time and
remaining time of the current
chapter, and current playback status will be displayed.
• During playback DivX® video file only, this On-screen is
displayed.
4 Press the DISPLAY button.
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
• During playback DivX® video file only, this On-screen is
displayed.
5 Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
this page)
OFF
• OFF appears on the TV screen.
2 Press the ENTER button or the Cursor buttons (s or
B) to switch among
(x1.3),
(x0.8) and OFF.
: Plays back approximately at 0.8 times of normal playback.
: Plays back approximately at 1.3 times of normal playback.
3 To return to normal playback, press the PLAY button.
NOTES:
– 25 –
• Every time you press the STOP button, the setting will
be turned OFF.
• Subtitle can be viewed during this function.
• Picture Control, Black Level, Audio Language and
Virtual Surround setting cannot be changed while using
this mode.
• Virtual Surround does not function while using this mode.
• This feature may not work at some point on a disc.
• When using digital audio connection (COAXIAL, OPTICAL or HDMI), the LPCM sound will be output.
• When using the Dialog Speed function with Multi-channel digital outputting, the analog output sound will be
fixed at 2 channel.
• When using digital audio connection, only the Dolby
Digital sound will be available.
• This feature does not work when the video format of
the inserted disc does not match to the output video
format setting of this unit (playing NTSC disc while TV
TYPE is set to PAL etc.).
EN
E6EG0UD(EN).qx4
07.5.15
4:48 PM
Page 26
DISC PLAYBACK
Audio Language
<DivX®>
<DVD>
1.ENG/6
1/8
DVD-V DivX®
ENG
Letterbox
The DVD player allows you to select a language (if multiple
languages are available) during DVD or DivX® disc playback.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
2.FRE/6
2/8
ITA
Wide screen
desired language.
<DVD>
1.ENG Dolby D 3/2.1ch 48k/3
OFF
<DivX®>
OFF
1. Dolby D / 8 ENG
Director Commentary
2.FRE Dolby D 3/2.1ch 48k/3
• For DivX® several subtitle tag information exists. Some
examples are shown as follows.
<Example>
Letterbox:
Subtitle for the letterbox version of the
movie.
Wide screen: Subtitle for the widescreen version of the
movie.
Children:
Subtitle for an audience of children.
etc.
2. Dolby D / 8 FRE
Writer Commentary
3.JPN Dolby D 3/2.1ch 48k/3
8. MP3 / 8 SPA
Cast Commentary
3 To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
NOTES:
• For DivX several audio tag information exists. Some
examples are shown as follows.
<Example>
Director Commentary: Audio recorded comment of the
movie director.
Writer Commentary: Audio recorded comment of the
movie writer.
Cast Commentary:
Audio recorded comment of the
movie actors.
etc.
®
• Some discs allow subtitle language setting on the disc
menu. (Operation varies between discs. Refer to the
manual accompanying the disc.)
• Pressing the SUBTITLE button may not work on some
DVDs with multiple subtitle languages (e.g. DVDs which
allow subtitle language setting on the disc menu).
• If your desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have
subtitles in that language.
• If you choose a language that has a three-letter language code, the code will be displayed every time you
change the Subtitle Language setting. If you choose
any other Languages, ‘---’ will be displayed instead
(refer to page 32).
• If the disc has no subtitle language, NOT AVAILABLE
will be displayed.
• For discs with DivX® files, the screen only displays the
number of subtitle languages.
• If the DivX® file has no subtitle tag information, the subtitle tag is not displayed.
NOTES:
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
• Some discs allow to change audio language setting on
the disc menu. (Operation varies between discs. Refer
to the manual accompanying the disc.)
• Pressing the AUDIO button may not work on some DVDs
with multiple audio languages (e.g. DVDs which allow to
change audio language setting on the disc menu).
• If you choose a language that has a three-letter language
code, the code will be displayed every time you change the
Audio Language setting. If you choose any other
Languages, ‘---’ will be displayed instead (refer to page 32).
• Audio Language selection cannot be made during
Dialog Speed in DVD (refer to page 25).
• If the disc has no audio language, NOT AVAILABLE will
be displayed.
• If the DivX® file has no audio tag information, the audio
tag is not displayed.
Subtitle Language
DVD-V DivX®
Camera Angle
DVD-V
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
) mark appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
desired angle.
The DVD player allows you to select a subtitle language (if
multiple languages are available) during DVD or DivX® disc
playback.
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
1/8
Angle 1
2/8
Angle 2
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
• Press the Cursor buttons (s or B) to turn on or off
subtitles during playback.
8/8
Angle 8
NOTE:
• If the ANGLE ICON setting is OFF in the others menu,
the (
) will not appear (refer to page 31).
– 26 –
EN
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 27
DISC PLAYBACK
Super Audio CD Setup
Super
Audio CD
DVD-V DVD-A DivX®
Picture Control adjusts Brightness, Contrast, Color, Gamma
Correction and Sharpness of the specific display.
1 During playback, press the
MODE button.
BRIGHTNESS
s +1B
2 Press the Cursor buttons (K
or L) to switch among items.
3 Press the ENTER button or the Cursor buttons (s or
B) to adjust the selected item to a desired level.
• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be selected.
4 To return to normal playback, press the RETURN
1 Press the SUPER AUDIO CD SET UP button
repeatedly to select among MULTI-CH AREA, CD
AREA, or 2CH AREA.
MULTI-CH AREA - Playback in multi channel format.The
number of channels depends on the disc
being played.
CD AREA
- Playback in the same quality with sound
as normal CDs.
2CH AREA
- Playback in higher quality than that of
normal CD sound.
button.
NOTES:
MULTI-CH AREA
• The default settings for all items in Picture Control are “0”.
• The setting display will disappear in 10 seconds of no use.
• This function cannot be used during Dialog Speed
(refer to page 25).
• If you return all items to the default settings, select “INITIALIZE” at step 2 .
SACD
CD AREA
2CH AREA
Sound Mode
SACD
DVD-A
This function allows you to select a desired sound mode during DVD-Audio playback.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
desired sound.
NOTE:
• When selecting a multichannel sound, it may
not mixed down in
some cases even
though the HDMI
AUDIO or ANALOG
AUDIO is 2 CHANNEL.
front panel display
NOTES:
• The Virtual Surround setting is not available for Super
Audio CDs. (It may be possible to use the Virtual Surround
setting when playing back discs that include a CD area.)
• Some playback options may not be available.These will
be skipped.
• MULTI-CH AREA is selected as default.
1.LPCM 3/2.1ch 96k/2
Virtual Surround
DVD-V DVD-A
2.PPCM 2/0ch 96k/2
CD
MP3
WMA
You can enjoy stereo phonic virtual space through your existing 2 channel stereo system.
1 During playback, press the MODE
OFF
button repeatedly until the Virtual
Surround setting appears.
2 Press the ENTER button to set
it 1(Natural effect), 2(Emphasized effect) or OFF.
3 Press the RETURN button to exit.
NOTES:
Stereo Sound Mode
CD
1 Press the AUDIO button repeatedly during play-
• Select Virtual Surround OFF or lower the volume if the
sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than STEREO (for Audio CD
playback only).
• This function cannot be used during Dialog Speed
(refer to page 25).
• Set HDMI AUDIO and ANALOG AUDIO to 2 CHANNEL
to use this function (refer to pages 29-30).
• The Virtual Surround setting is not available for Super
Audio CDs. (It may be possible to use the Virtual Surround
setting when playing back discs that include a CD area.)
back to select your desired sound mode.
STEREO - both right and left channels are active (stereo)
L-ch
- only left channel is active
R-ch
- only right channel is active
STEREO
Both right and left channels
are active (stereo).
L-ch
Only the left channel
is active.
Black Level Setting
R-ch
Only the right channel
is active.
DVD-V DVD-A DivX®
NOTE:
• Stereo sound mode will not be changed when playing
DTS CD.
Adjust the Black Level Setting to make the black parts of the
picture as bright as you prefer.
1 During playback, press the
ON
MODE button repeatedly until
Black Level setting appears.
2 Press the ENTER button to switch ON/OFF.
ON (Default) : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
3 Press the RETURN button to exit.
NOTE:
– 27 –
• This function cannot be used during Dialog Speed
(refer to page 25).
EN
English
Picture Control
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 28
DVD SETUP
In Setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode are available (refer to pages 28-32).
QUICK mode consists of the setting menus frequently used, and they are accompanied with QUICK mark.
You can make all settings in CUSTOM mode.
STILL MODE (Default : AUTO)
Language Setting
• Press the Cursor buttons (K or
L) for an item selection (AUTO,
FIELD, or FRAME), then press
the ENTER button.
• This function allows you to
adjust picture resolution and
quality in still mode.
• An individual picture on TV screen is called as “frame”,
which consists of two separate images called as “field”.
Some pictures may be blurred at the AUTO setting in
still mode due to their data characteristics.
• AUTO: Automatically selects the best resolution setting (FRAME or FIELD) based on the data
characteristics of the pictures.
• FIELD: Select FIELD when the pictures are still unstable even if AUTO is selected. FIELD stabilizes
the pictures, although the picture quality may
become coarse due to the limited amount of
data.
• FRAME: Select FRAME to display relatively motionless
pictures in higher resolution. FRAME improves
the picture quality, although it may unstabilize
the pictures due to simultaneous output of two
field data.
Language setting can be varied with some DVDs or DivX®
Subtitles recorded in discs.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select
DISPLAY
STILL MODE
AUTO
FIELD
FRAME
CUSTOM, then press the ENTER button.
• The custom mode will appear.
3 Press the Cursor buttons (sor B)
to select LANGUAGE, then press
the ENTER button to confirm.
4 Press the Cursor buttons (K or
L) to select an item, then press
the ENTER button.
DIALOG (Default : ORIGINAL)
LANGUAGE
DIALOG
SUBTITLE
DISC MENU
OSD
DivX SUBTITLE
ORIGINAL
OFF
ENGLISH
ENGLISH
OFF
• Sets the audio language.
SUBTITLE (Default : OFF)
• Sets the subtitle language.
DISC MENU (Default : ENGLISH)
• Sets the language for DVD Menu and title menu (for DivX®).
OSD (Default : ENGLISH)
QUICK
• Sets the language for the On-Screen display.
TV TYPE (DEFAULT: MULTI)
DivX SUBTITLE (Default: OFF)
• Press the Cursor buttons (K or
L) to select a setting, then
press the ENTER button.
• Select a video system setting
between MULTI, NTSC and
PAL.
• NTSC: Select this when your TV’s video format is
NTSC. If NTSC is selected, output format is
fixed to NTSC.
• PAL: Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
• MULTI: Automatically selects the suitable video out system (PAL/NTSC) according to the format of the
inserted disc.
- For the discs recorded with NTSC system, the NTSC
signal will be output and pictures of the discs can be
viewed on an NTSC or Multi system TV.
- For the discs recorded with PAL system, the PAL signal will be output and pictures of the discs can be
viewed on a PAL system TV or Multi system TV.
• Sets the DivX subtitle language.
®
DISPLAY
TV TYPE
5 Press the Cursor buttons (K or L) to select a set-
NTSC
PAL
MULTI
ting, then press the ENTER button.
• If OTHER is selected in the DIALOG, SUBTITLE or
DISC MENU, press four-digit number to enter the
code for the desired language (refer to the language code list on page 32).
• Only the languages supported by the disc can be selected.
6 Press the SETUP button to exit and activate the
new settings.
NOTE:
• Language Setting for DIALOG and SUBTITLE may not
be available with some discs. Then use the AUDIO and
SUBTITLE buttons. Details are on page 26.
Display Setting
You can change certain aspects of the DVD display screens,
still mode, TV Type, Progressive and HDMI settings.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select
NOTES:
• If the AC power cord is disconnected while the unit is
turned on, the video format of opening screen is
altered. To keep the format, turn the unit off before
unplugging the AC power cord.
• When PAL signal is output from this unit, the image of
on-screen display will be distorted or will not be displayed at all. To bring back the on-screen display, select
MULTI using the DIMMER NTSC/PAL button on the
front panel then play a disc recorded in NTSC system,
or select NTSC. Refer to TV TYPE on page 17.
CUSTOM, then press the
ENTER button.
• The custom mode will appear.
3 Press the Cursor buttons (s or
DISPLAY
TV ASPECT
STILL MODE
TV TYPE
PROGRESSIVE
PROG.MODE
HDMI SELECT
HDMI PICTURE
4:3 LETTER BOX
AUTO
MULTI
OFF
AUTO1
YCbCr
NORMAL
B) to select DISPLAY, then press
the ENTER button to confirm.
4 Press the Cursor buttons (K or
L) to select an item, then press the ENTER button.
TV ASPECT (Default : 4:3 LETTER BOX)
QUICK
• Press the Cursor buttons (K or
L) for an item selection, then
press the ENTER button.
• Select 4:3 LETTER BOX for a
black bars appears on top and bottom of the screen.
• Select 4:3 PAN & SCAN for a full
height picture with both sides
trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
• Select 4:3 SQUEEZE when the TV screen is too large horizontally at 16:9 WIDE setting and when it is impossible to
adjust the screen size using the TV’s controls.
PROGRESSIVE
(Default: OFF) QUICK
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
4:3 SQUEEZE
– 28 –
DISPLAY
• Press the Cursor buttons (K or
L) to set PROGRESSIVE to ON
or OFF, then press the ENTER
button.
• The setting will be effective
when you exit the setup screen by pressing the SETUP
button.
• When PROGRESSIVE is ON, P.SCAN appears on the
DVD player’s display after you exit the setup screen.
• Refer to page 12 for more details.
• In the HDMI output mode, even when PROGRESSIVE
is set to ON, signals are output always as Interlace.
TV ASPECT
STILL MODE
TV TYPE
PROGRESSIVE
PROG.MODE
HDMI SELECT
HDMI PICTURE
4:3 LETTER BOX
AUTO
MULTI
OFF
AUTO1
RGB
NORMAL
EN
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 29
DVD SETUP
• Press the Cursor buttons (K or
L) to select a mode for the progressive scan output, then press
the ENTER button.
• AUTO1: mode suitable for images
on the film material.
• AUTO2: mode for images on the material of 30-frame film.
• VIDEO1: mode for normal video material.
• VIDEO2: mode for video material with less movements.
• VIDEO3: mode for video material with many movements.
DOLBY DIGITAL
(Default: BITSTREAM)
DISPLAY
PROG.MODE
HDMI SELECT (Default: YCbCr)
DISPLAY
TV ASPECT
STILL MODE
TV TYPE
PROGRESSIVE
PROG.MODE
HDMI SELECT
HDMI PICTURE
4:3 LETTER BOX
AUTO
MULTI
OFF
AUTO1
YCbCr
NORMAL
DTS
(Default : BITSTREAM)
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
DISPLAY
TV ASPECT
STILL MODE
TV TYPE
PROGRESSIVE
PROG.MODE
HDMI SELECT
HDMI PICTURE
4:3 LETTER BOX
AUTO
MULTI
OFF
AUTO1
YCbCr
NORMAL
and activate the new settings.
NOTE:
• Set to ON for sound output on the
bass-woofer channel when 2-channel audio source is played back.
• This function is effective only for the
5.1ch AUDIO OUT jacks. Set the
AUDIO MODE to ANALOG and
ANALOG AUDIO to MULTI CHANNEL to set this function.
• When SUB WOOFER is set to NONE in the Speaker
Configuration, BASS ENHANCER will be set to OFF
automatically.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
Audio Setting
You can change some Audio settings. It only affects during the
playback of DVD discs.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select
CUSTOM, then press the ENTER button.
• The custom mode will appear.
3 Press the Cursor buttons (s or B) to select
• Select the sound is output from
whether HDMI jacks or 5.1ch
AUDIO OUT jacks.
HDMI: Sound is output via HDMI
connection. Output from
5.1ch AUDIO OUT connection may be restricted.
ANALOG: Sound is output via 5.1ch AUDIO OUT jacks.
Output from HDMI connection is cut off.
• Set to ANALOG when Super Audio CD is played back.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
• This menu display contains 2 pages. Press the Cursor
button (L) repeatedly to show the next page.
AUDIO
ANALOG AUDIO
2 CHANNEL
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
HDMI AUDIO (Default: 2 CHANNEL)
• Select the number of channels for
HDMI audio output between 2
CHANNEL and MULTI CHANNEL.
• Refer to the table on page 16 for
the actual output settings.
• Connect appropriate external
equipment for each setting and
set AUDIO MODE to HDMI beforehand to perform this
setting.
2 CHANNEL:
2 channel signals are output from HDMI OUT jack.
Suitable for monitors or projectors compatible with
HDMI 2CH.
MULTI CHANNEL:
Multi channel signals are output from HDMI OUT
jack. Suitable for monitors or amplifiers compatible
with HDMI multi channels.
• When MULTI CHANNEL is selected, the Speaker setting
menu for HDMI AUDIO will appear (refer to page 31).
AUDIO
DRC (Dynamic Range Control)
(Default : ON)
• DRC function compresses the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
AUDIO MODE (Default: HDMI)
AUDIO, then the ENTER button to confirm.
4 Press the Cursor buttons (K or L) button to select
an item, then press the ENTER button.
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
BASS ENHANCER (Default: OFF)
• Be sure to press the SETUP button, or the setting will
not work.
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
QUICK
AUDIO
5 Press the SETUP button to exit
AUDIO
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
BITSTREAM:
DTS signals are output as
Bitstream.
• For HDMI connection, if the
connected equipment is not compatible with the
DTS Bitstream, the signals are output as PCM
regardless of the setting.
PCM: Convert DTS to PCM.
HDMI PICTURE (Default: NORMAL)
• Select a HDMI picture mode between
NORMAL and ENHANCED.
• Select ENHANCED if the blackwhite contrast is not clear.
• This setting is effective only for
HDMI RGB output.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
AUTO1
AUTO2
VIDEO1
VIDEO2
VIDEO3
• Select an HDMI output mode
between YCbCr and RGB.
• When the connected equipment
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
QUICK
• Set to BITSTREAM when the player is connected to a Dolby Digital
decoder.
• This function is effective only for
the COAXIAL, OPTICAL and HDMI connections.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream.
• For HDMI connection, if the connected
equipment is not compatible with the Dolby
Digital BITSTREAM, the signals are output as
PCM regardless of the setting.
PCM: Convert Dolby Digital to PCM.
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
LPCM SELECT (Default : OFF)
• Set to ON when outputting in 48kHz.
• This function is available only on
digital outputting of a disc recorded in 96kHz.
• Sounds of the DVD-Audio which
exceed 96kHz will be output as
96kHz even if LPCM SELECT is set to OFF.
• This function is not effective for the HDMI sound output.
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
BASS ENHANCER
AUDIO MODE
HDMI AUDIO
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
When playing disc with copyright protection
• The sound will be down sampled at 48kHz, even if you
set to OFF.
– 29 –
ON
OFF
BITSTREAM
BITSTREAM
OFF
HDMI
2 CHANNEL
EN
English
PROG.MODE (Default: AUTO1)
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 30
DVD SETUP
ANALOG AUDIO (Default : 2 CHANNEL)
DELAY TIME
• Set AUDIO MODE to ANALOG beforehand to perform
this setting.
2 CHANNEL:
Output 2ch sound from the 5.1ch
AUDIO OUT jacks.
MULTI CHANNEL: Output Multi channel sound from
the 5.1ch AUDIO OUT jacks.
AUDIO
ANALOG AUDIO
2 CHANNEL
AUDIO
ANALOG AUDIO
2 CHANNEL
MULTI CHANNEL
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
(exclude Sub woofer). The delay time setting can be
used to make the sound from the different speakers
reach the listening position at the same time.
Use the Cursor buttons (K or L) to select the setting item,
then press the ENTER button.
• Press the Cursor buttons (K or L) to select the speaker to set, then press the ENTER button.
DISTANCE (Default : FEET)
METERS (when the ENTER
button is pressed):
The unit of distance is set to
meters (m).
FEET(when the ENTER button is
pressed):
The unit of distance is set to
feet (ft).
FRONT(L/R), CENTER,
SURROUND(L/R)
(DEFAULT : 12ft)
FRONT(L/R):
The distance can be set within
the range of 0 to 60 feet.
CENTER, SURROUND:
These are depends on the
setting value of FRONT(L/R).
AUDIO
DELAY TIME
5 Press the SETUP button to exit and activate the
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
new settings.
Speaker Setting for ANALOG AUDIO
When MULTI CHANNEL is selected for ANALOG AUDIO,
some speaker settings will be required.
• Set AUDIO MODE to ANALOG beforehand to perform
this setting.
1 Press the Cursor buttons (K or
L) to select MULTI CHANNEL,
then press the ENTER button.
2 Press the Cursor buttons (K or
L) to select the below items,
then press the ENTER button.
AUDIO
MULTI CHANNEL
Speaker Configuration
DELAY TIME
CHANNEL LEVEL
AUDIO
DELAY TIME
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
NOTES:
• The custom mode will appear.
AUDIO
Speaker Configuration
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
FL
C
• Press the Cursor buttons
(K or L) button to select the
speaker size, then press the
ENTER button.
FR
SW
SL
FEET
12ft
12ft
12ft
ON
AUDIO
FRONT(L/R)
K
18ft
17ft
16ft
15ft
14ft
13ft
12ft
• It is not possible to adjust this
item if CENTER and SURL
ROUND have been set to NONE
in the Speaker Configuration setting.
• When DEFAULT is selected and the ENTER button is
pressed, all the items are restored to their factory
default settings.
Speaker Configuration
• Press the Cursor buttons (K or
L) to select the speaker to set,
then press the ENTER button.
FEET
12ft
12ft
12ft
ON
SR
CHANNEL LEVEL
When the channel level differs from
each speaker, the adjustment can
be made in the unit of dB (-12dB to
0dB).
AUDIO
FRONT(L/R)
LARGE
SMALL
FL
C
FR
SW
SL
SR
TEST TONE:
• Press the Cursor buttons
(K or L) to select TEST TONE,
then press the ENTER button.
The test tone will output from
each speaker in turn.
FRONT(L/R), CENTER, SURROUND(L/R)
LARGE: Select this when the connected speaker is
capable of playing back sounds of 100Hz or
more.
SMALL: Select this when the connected speaker is
capable of playing back sounds less than
100Hz.
NONE: Select this when it is not connected. (It cannot
be set NONE on the FRONT speaker.)
SUB WOOFER
YES: Select this when SUB WOOFER is connected.
NONE: Select this when it is not connected.
CHANNEL LEVEL:
• Press the Cursor buttons (K or
L) to select the speaker to set,
then press the ENTER button.
• Press the Cursor buttons
(K or L) to select the desired
level for each speaker, then press
the ENTER button.
NOTES:
• NONE is not available for SUB WOOFER when SMALL
is selected for FRONT (L/R).
• SMALL is not available for FRONT (L/R) when NONE
is selected for SUB WOOFER.
• ON is not available for BASS ENHANCER when NONE
is selected for SUB WOOFER.
• When playing back DVD audio, the sound may not
come out as set due to restrictions in the disc or the
player.
AUDIO
CHANNEL LEVEL
TEST TONE
FRONT(L)
CENTER
FRONT(R)
SUB WOOFER
SURROUND(R)
SURROUND(L)
0dB
0dB
0dB
0dB
0dB
0dB
AUDIO
TEST TONE
FRONT(L)
CENTER
FRONT(R)
SURROUND(R)
SURROUND(L)
0dB
0dB
-1dB
-2dB
-5dB
AUDIO
FRONT(L)
0dB
-1dB
-2dB
-3dB
-4dB
-5dB
-6dB
L
NOTES:
• While the test tone is being output, the channel balance adjustment cannot be made.
• When TEST TONE is selected, no test tone will be output from SUBWOOFER.
• It is not possible to adjust this item for the speaker that
has been set to NONE in Speaker Configuration setting.
3 Press the SETUP button to exit.
– 30 –
EN
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 31
DVD SETUP
• This function may not work on some DVDs. Be sure if
the RATINGS operates in the way you have set.
• The resume information will be cleared if you change
the parental level when the resume information is on.
AUDIO
MULTI CHANNEL
Speaker Configuration
DELAY TIME
CHANNEL LEVEL
To Change the Password:
1) Follow the steps 1 to 4 above.
2) Press the Cursor buttons (K or L) to select PASSWORD
CHANGE, then press the ENTER button.
3) Enter a new four-digit password, then press the ENTER button.
4) Press the SETUP button to exit.
Speaker Configuration
Set the size of each speaker between
LARGE and SMALL.
• The presence of the speakers is
detected automatically. Set the
detected speakers’ size.
• When a speaker is not detected,
it's size is set as NONE.
• Once a speaker is detected, you
cannot set it to NONE.
• The default setting is LARGE.
• During HDMI audio output, the
sound output via analog channels
may be restricted.
AUDIO
Speaker Configuration
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
FL
C
IF YOU FORGET THE PASSWORD
FR
1 Press 4, 7, 3, 7 at step 4 .
• Password will be cleared and rating level will be set to ALL.
2 Repeat steps 4 to 7 to re-establish the parental lock.
SW
SL
SR
CONTROL LEVELS
AUDIO
CENTER
LARGE
SMALL
NONE
FL
C
• ALL
Parental lock is canceled.
• Level 8
DVD software of any grade (adult/general/children) can
be played back.
• Levels 7 to 2
Only DVD software intended for general use and children can be played back.
• Level 1
Only DVD software intended for children can be played
back, with those intended for adult and general use
prohibited.
FR
SW
SL
SR
DELAY TIME
Same as DELAY TIME setting for “Speaker Setting for
ANALOG AUDIO” on page 30.
CHANNEL LEVEL
Same as CHANNEL LEVEL setting for “Speaker
Setting for ANALOG AUDIO” on page 30.
Ratings Control
Ratings Control allows you to set a limit, which prevents your
children from viewing inappropriate materials on DVDs.
A four-digit password that you establish will give you the
control.
RATING LEVEL
You can set a viewing limit through Rating Level. Playback of
the discs will stop if the disc’s general rating exceeds the limit
you set.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons
(s or B) to select
CUSTOM, then press the
ENTER button.
RATINGS
PASSWORD
Please enter a 4-digit password.
• The custom mode will appear.
3 Press the Cursor buttons
(s or B) to select RATINGS,
then press the ENTER button.
4 Press the Numeric buttons to
enter your four-digit password.
• When doing this for the first time,
enter any four-digit number by
pressing the Numeric buttons
(except for 4737), then press the
ENTER button. That number will
be used as the password from the
second time onward. Record your
password in case you forget it.
Others Setting
This function allows you to adjust Angle Icon availability, Auto
Power off, brightness of the Player’s display panel, slide show
mode, to obtain DivX® registration code and DVD-Audio player
mode.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons
(s or B) to select CUSTOM, then press ENTER.
• The custom mode will appear.
3 Press the Cursor buttons
(s or B) to select Other, then
press the ENTER button to
confirm.
4 Press the Cursor buttons
(K or L) to select an item,
then press ENTER.
ANGLE ICON (Default : ON)
• Press the ENTER button repeatedly to turn ON or OFF.
RATINGS
RATING LEVEL
ALL
PASSWORD CHANGE
AUTO POWER OFF (Default :
ON)
• Press the ENTER button repeatedly to turn ON or OFF.
• It will turn off the DVD player automatically after 30 minutes of
no use.
RATINGS
RATING LEVEL
ALL
8
7 [NC-17]
6 [R]
5
4 [PG13]
3 [PG]
L
PANEL DISPLAY
(Default : BRIGHT)
5 Press the Cursor buttons (K or L) to select RAT-
ING LEVEL, then press the ENTER button.
6 Press the Cursor buttons (K or L) to select a desired
level, then press the ENTER button.
7 Press the SETUP button to exit and activate the
new settings.
– 31 –
• Press the Cursor buttons
(K or L) to select a setting
(BRIGHT, DIMMER and AUTO),
then press the ENTER button.
• When AUTO is selected, the display dims only during playback.
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
ON
ON
BRIGHT
5sec
AUDIO
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
ON
ON
BRIGHT
5sec
AUDIO
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
ON
ON
BRIGHT
5sec
AUDIO
OTHERS
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
EN
English
NOTES:
Speaker Setting for HDMI AUDIO
When HDMI AUDIO is selected for
MULTI CHANNEL, the bass management setting menu will appear. Set the
Speaker Configuration, delay time and
channel level for each speakers (front,
center, surround and sub woofer).
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 32
DVD SETUP
SLIDE SHOW (Default : 5sec)
• This adjusts the playback speed
of the JPEG SLIDE SHOW.
• Press the Cursor buttons
(K or L) to select between 5 sec
and 10 sec, then press the
ENTER button.
• Some DivX® VOD files are restricted with the limited
playable times (you cannot play them back beyond the
limit). If your DivX® VOD file has such limit, the playback
confirmation screen will appear. Use the Cursor buttons (s or B) to select YES if you want to play back
the file, or to select NO if you do not wish to play it
back. Then, press the ENTER button to confirm the
selection.
• Please send your inquiries regarding the VOD files to
DivX®, Inc.
OTHERS
SLIDE SHOW
5sec
10sec
DivX(R) VOD
• This player allows you to use the
DivX® Video-On-Demand (VOD)
services. You can play back the
files purchased or rental from
the VOD services. You need to
have a registration code to purchase or rental VOD files. Please visit
www.divx.com/vod for more details.
OTHERS
DivX(R) VOD
5 Press the SETUP button to exit.
Your registration code is:
12345678
To learn more visit
www.divx.com/vod
Reset to the Default Settings
(except for Ratings Control)
This allows you to return all selections of SETUP (except for
RATINGS) to their default settings.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select
PLAYER MODE (Default : AUDIO)
• Press the ENTER button repeatedly to select AUDIO or VIDEO.
• AUDIO: Select to play back general contents of DVDAudio.
• VIDEO: Select to play back
DVD-Video contents included in DVD-Audio.
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
PLAYER MODE
ON
ON
BRIGHT
5sec
INITIALIZE, then press the ENTER button.
3 Press the Cursor buttons (K or L) to select YES,
AUDIO
then press the ENTER button.
4 Press the SETUP button to exit.
NOTE:
NOTES:
• If you do not wish to initialize, select NO at step 3 .
• You cannot play back the DivX® VOD files obtained with
different registration codes on this player.
• You cannot play back the DivX® VOD files, of which
rental period has been expired. In such case, press the
MENU button and select other files that can be played
back.
Language Code List
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian [BUL]
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Code
Language
Code
Language
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6565
6557
6558
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a language that has a three-letter language code (written in bracket), the code will be displayed every time you change the Audio or Subtitle Language setting on page 26. If you choose any other languages, ‘---’ will be displayed instead.
– 32 –
EN
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 33
TROUBLESHOOTING GUIDE
Problem
Solution
No power
- Check if the AC power cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.
No sound or picture
-
Distorted picture
- Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
- Connect the DVD player directly to the TV.
- Check if the PROGRESSIVE mode is set correctly.
- Check the TV TYPE. (MULTI, NTSC or PAL)
Check
Check
Check
Check
Check
if the TV is turned on.
the video and HDMI connection.
the AUDIO/VIDEO cable connections.
if the PURE DIRECT is set to ON. If it is the case, set it to OFF
if the PROGRESSIVE mode is set correctly.
English
If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, consulting the following checklist.
Page
15, 16
13-15
17
12, 28
15
12, 28
17, 28
Completely distorted picture or black/
white picture with DVD
- Connect the DVD player directly to the TV.
- Make sure the disc is compatible with the DVD player.
No sound or distorted sound
- Adjust the volume.
- Check that the speakers are connected correctly.
- The HDMI sound is not output during PURE DIRECT or
when AUDIO MODE is set to ANALOG.
No audio at digital output
- Check the digital connections.
13, 16
- Check the audio settings.
29,30
13, 16
- Digital signals cannot be output with Super Audio CDs.
Use analog connections.
- Area/layer of Super audio CD being played (MULTI / STEREO / CD)
does not match amplifier connections.
- Check the HDMI connection. (Check the status of the HDMI related indications.) 16, 17
- Check whether the connected monitor equipment or other equipment supports
16
HDCP. (This player will not output a video signal unless the other equipment
supports HDCP.)
- Connect the DVD player to the display equipment using the Audio/Video
13-16, 29
cables (supplied), and check the HDMI settings.
- Check whether the output format of this player (HDMI FORMAT)
16
matches the supported input format of other connected equipment.
- Check if the PURE DIRECT is set to ON.
17
If it is the case, set it to OFF.
34
- Check the disc for fingerprints/scratches and clean with a soft cloth wiping
from centre to edge.
- Clean the disc.
34
No image from HDMI connection
Picture freezes momentarily during
playback
Disc cannot be played back
-
Clean the disc.
Ensure the disc label is facing up.
Check if the disc is defective by trying another disc.
Cancel the ratings control or change the control level.
Insert a correct disc that can be played back on this player.
15
6
13-15
17, 29
34
17
31
6
No return to start-up screen when disc - Reset the player by turning it off, then on again.
is removed
-
The DVD player does not respond to
the remote control
-
11
11
11
Buttons do not work or the player
stops responding
- To completely reset the player, unplug the AC cord from the AC
outlet for 5-10 seconds.
-
The DVD player does not respond to
some operating commands during
playback
- Operations may not be permitted by the disc.
Refer to the instructions of the disc.
6
The DVD player cannot read
CDs/DVDs
- Use a commonly available CD/DVD cleaner to clean the lens before
sending the DVD player for repair.
34
Angle does not switch
- The angle cannot be switched for DVDs which do not contain
multiple angles. In some cases multiple angles are only recorded for
specific scenes.
26
Playback does not start when the title
is selected
- Check the "RATINGS" setting.
31
Aim the remote control directly at the sensor on the front of the player.
Reduce the distance to the player.
Replace the batteries in the remote control.
Re-insert the batteries with their polarities (+/- signs) as indicated.
The password for rating level has been - Enter the default password "4737", then your forgotten password will
forgotten
be cleared.
31
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating
Instruction for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
– 33 –
EN
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 34
SPECIFICATIONS
SIGNAL SYSTEM
NTSC/PAL color
APPLICABLE DISCS
(1) DVD-Video/DVD-Audio Discs
1-layer 12cm single-sided discs, 2-layer 12cm single-sided
discs, 2-layer 12cm double-sided discs (1 layer per side)
1-layer 8cm single-sided discs, 2-layer 8cm single-sided
discs, 2-layer 8cm double-sided discs (1 layer per side)
(2) Super Audio CD
(3) DVD-R/DVD-RW
(4) Compact discs (Audio CD)
12cm discs, 8cm discs
(5) CD-R/CD-RW
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.286Vp-p
Output connectors: S connectors, 1 set
VIDEO OUTPUT
Output level: 1Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
PB/CB output level: 0.648Vp-p (75Ω/ohms)
PR/CR output level: 0.648Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
HDMI OUTPUT
HDMI jack, 1 set
AUDIO OUTPUT
Output level: 2Vrms
2 channel (L, R) output connector: Pin jack, 1 set
Multi channel (FL, FR, C, SL, SR, SW): Pin jack, 1set
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1 DVDs (linear PCM) : 4Hz to 22kHz (48kHz sampling)
: 4Hz to 44kHz (96kHz sampling)
: 4Hz to 88kHz (192kHz sampling)
2 CDs
: 4Hz to 20kHz
3 Super Audio CD
: 4Hz to 100kHz
(2) S/N ratio
: 115dB
(3) Total harmonic distortion : 1kHz CD: 0.004%
(4) Dynamic range
: DVD: 100dB
CD: 98dB
DIGITAL AUDIO OUTPUT
Optical digital output: Optical connector, 1 set
Coaxial digital output: Pin jack, 1 set
POWER SUPPLY
AC 120V, 60Hz
POWER CONSUMPTION
15W (Standby: 0.4W)
MAXIMUM EXTERNAL DIMENSIONS
W: 17-3/32" (435mm)
H: 2-61/64" (75mm)
D: 12-13/64" (310mm)
(including protruding parts)
MASS
5.72 lbs (2.6 kg)
REMOTE CONTROL UNIT
RC-1017
Infrared pulse type
Supply: DC 3V, 2 R6P/AA batteries
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
Cleaning the disc lens
• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Operating Instruction, the laser optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
•
•
•
•
Use discs which have the following logos on them.
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played on the this product. Do not attempt to play such discs, as they may damage the player.
– 34 –
EN
E6EG0UD(EN).qx4
07.5.15
4:49 PM
Page 35
English
MEMO
– 35 –
EN
E6EG0UD(EN).qx4
07.12.21
3:24 PM
Page 36
TOKYO, JAPAN
www.denon.com
Printed in China
00D 511 4661 107
Denon Brand Company, D&M Holdings Inc.
1VMN23656A
E6EG0UD ****
Download PDF

advertising