FZ-VESA 形

Add to my manuals
2 Pages

advertisement

FZ-VESA 形 | Manualzz

FZ-VESA

VESAアタッチメント

取扱説明書

このたびは、本製品をお買い上げいただきまして、まことにありがとうございます。

ご使用に際しては、次の内容をお守りください。

 ・ 電気の知識を有する専門家がお取り扱いください。

 ・ この取扱説明書をよくお読みになり、十分にご理解のうえ、正しくご使用ください。

 ・ この取扱説明書はいつでも参照できるよう大切に保管してください。

■特長

コントローラの背面に本製品を取り付けることにより、VESA規格に

準拠したスタンドやアームに取り付けることができます。

取り付け穴ピッチは、75mm、100mm 2種類に対応しています。

■梱包品の確認

 箱の中に以下の部品が揃っているか確認してください。

(本製品) . . 1個

(M3×5mm) . . . .

■コントローラへの取り付け方法

②VESA規格のアームに、下記に示すネジで取り付けてください。

ネジ径   : M4

■外形寸法

100×100 M4 4ヶ所

75×75 M4 4ヶ所

VESAアタッチメント 1コ

75

100

120

* 1 6 3 6 8 8 0 - 0 B *

© OMRON Corporation 2006 All Rights Reserved.

使用上の注意

恐れがあります。

ネジの長さの目安は次のとおりです。

ネジ径   : M4

ネジ M3×5mm 4コ

■一般仕様

材質

板厚

質量

耐振動

SPCC

1.6mm

約180g

10∼150Hz 片振幅0.1mm(加速度最大 15m/s 2 )

3方向 各8分 10回

(本製品にてコントローラを設置した状態)

耐衝撃 150m/s 2  6方向 各3回

(本製品にてコントローラを設置した状態)

15

( 91 )

(単位mm)

ご使用に際してのご承諾事項

①安全を確保する目的で直接的または間接的に人体を検出する用途に、本製品を使用し

ないでください。同用途には、当社センサカタログに掲載している安全センサをご使用く

ださい。

②下記用途に使用される場合、当社営業担当者までご相談のうえ仕様書などによりご確

認いただくとともに、定格・性能に対し余裕を持った使い方や、万一故障があっても危険

を最小にする安全回路などの安全対策を講じてください。 a)屋外の用途、潜在的な化学的汚染あるいは電気的妨害を被る用途

またはカタログ、取扱説明書等に記載のない条件や環境での使用 b)原子力制御設備、焼却設備、鉄道・航空・車両設備、医用機械、娯楽機械、 c)人命や財産に危険が及びうるシステム・機械・装置 d)ガス、水道、電気の供給システムや24時間連続運転システムなどの

高い信頼性が必要な設備 e)その他、上記 a) ∼ d) に準ずる、高度な安全性が必要とされる用途

*上記は適合用途の条件の一部です。当社のベスト、総合カタログ・データシート等最新版

       

 インダストリアルオートメーションビジネスカンパニー 

●お問い合わせ先

カスタマサポートセンタ

  フリーコール

0 1 2 0 - 9 1 9 - 0 6 6

電話

055-982-5015

(通話料がかかります)

〔技術のお問い合わせ時間〕

 ■営業時間:8:00∼21:00

 ■営 業 日:365日

 ■上記フリ−コ−ル以外のセンシング機器の技術窓口:

電話

055-982-5002

(通話料がかかります)

〔営業のお問い合わせ時間〕

 ■営業時間:9:00∼12:00/13:00∼17:30 (土・日・祝祭日は休業)

 ■営 業 日:土・日・祝祭日/春期・夏期・年末年始休暇を除く

●FAXによるお問い合わせは下記をご利用ください。

カスタマサポートセンタ お客様相談室 FAX 055-982-5051

●その他のお問い合わせ先

納期・価格・修理・サンプル・仕様書は貴社のお取引先、

または貴社担当オムロン営業員にご相談ください。 q 2009年10月

FZ-VESA

VESA Attachment

INSTRUCTION SHEET

Thank you for selecting OMRON product. This sheet primarily describes precautions required in installing and operating the product.

Before operating the product, read the sheet thoroughly to acquire sufficient knowledge of the product. For your convenience, keep the sheet at your disposal.

Features

Installing this product on the back of the controller allows installation on the stand and arm based on the VESA standard.

Mounting hole pitch supports two types of 75 mm and

100 mm.

Checking the Package

Check that the following items are included in the box.

• VESA attachment (this product) ................ 1 piece

• Mounting screws (M3 × 5 mm) ................ 4 pieces

How to Install onto the Controller

1 Install this product on the back of the controller with the

2 supplied screws (M3 × 5 mm) as shown in the diagram below.

Index of tightening torque: 0.49 Nּm

Install it on the arm based on the VESA standard with screws shown below.

Screw diameter: M4

Screw length (L): L < T + 12 mm

* Thickness of the other side to be installed: T

External Dimensions

100 × 100 M4 4 places

75 × 75 M4 4 places

75

100

120

VESA attachment:

1 piece

© OMRON Corporation 2006 All Rights Reserved.

Precautions for Use

• When installing the product on the stand and arm based on the VESA standard, care should be taken not to cause the screw tip to come into contact with the back of the controller. This may damage the controller.

An index of the screw length is as follows:

Screw diameter: M4

Screw length (L): L < T + 12 mm

* Thickness of the other side to be installed: T

• Securely tighten all screws when installing.

Screws M3 × 5 mm:

4 pieces

General Specifications

Material

Thickness

Weight

Vibration resistance

Shock resistance

SPCC

1.6 mm

Approx. 180 g

10 to 150 Hz at a single-amplitude of 0.1 mm

(maximum acceleration: 15 m/s 2 ), 10 times for 8 minutes each in 3 directions

(State in which the controller is installed with this product attached.)

150 m/s 2 : 3 times each in 6 directions

(State in which the controller is installed with this product attached.)

15

( 91 )

(Unit: mm)

Suitability for Use

THE PRODUCTS CONTAINED IN THIS SHEET ARE NOT SAFETY RATED.

THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF

PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY

COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES.

Please refer to separate catalogs for OMRON's safety rated products.

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of the products in the customer's application or use of the product.

Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be used.

Know and observe all prohibitions of use applicable to this product.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING

SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL

EQUIPMENT OR SYSTEM.

See also Product catalog for Warranty and Limitation of Liability.

EUROPE

OMRON EUROPE B.V. Sensor Business Unit

Carl-Benz Str.4, D-71154 Nufringen Germany

Phone:49-7032-811-0 Fax: 49-7032-811-199

NORTH AMERICA

OMRON ELECTRONICS LLC

One Commerce Drive Schaumburg,IL 60173-5302 U.S.A.

Phone:1-847-843-7900 Fax : 1-847-843-7787

ASIA-PACIFIC

OMRON ASIA PACIFIC PTE. LTD.

No. 438A Alexandra Road #05-05-08(Lobby 2),

Alexandra Technopark, Singapore 119967

Phone : 65-6835-3011 Fax :65-6835-2711

CHINA

OMRON(CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Zhong Road,

PuDong New Area, Shanghai, 200120, China

Phone : 86-21-5037-2222 Fax :86-21-5037-2200

OMRON Corporation o

O C T, 2 0 0 9

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement