Camera & Software Vision Package PC Vision System FJ Series

Camera & Software Vision Package PC Vision System FJ Series
PC Vision System FJ Series
Camera & Software Vision Package
• Built-in high-quality image processing in a PC system
• Resolving a variety of applications with highly robust and advanced measurement algorithm
• Gigabit Ethernet camera that can be readily connected to the FJ application software (the
connectivity tested and verified)
• Building an ideal machine vision using a customized sample in no time
System Configuration
Computer
Camera
Application software
Camera cable (LAN)
FJ-VSG
Ethernet
RS-232C
EtherNet/IP
Camera cable (I/O)
FJ-VSP
PLC / Sensor / External power supply, etc.
Ordering Information
Type
Camera & Software
Vision Package
• Application software × 1
license
• Camera × 1 unit
Camera (Single unit)
Model
300,000 pixels
Monochrome
FJ-SG-S
300,000 pixels
Color
FJ-SCG-S
2 million pixels
Monochrome
FJ-S2MG-S
2 million pixels
Color
FJ-SC2MG-S
5 million pixels
Monochrome
FJ-S5MG-S
5 million pixels
Color
FJ-SC5MG-S
300,000 pixels
Monochrome
FJ-SG
300,000 pixels
Color
FJ-SCG
2 million pixels
Monochrome
FJ-S2MG
2 million pixels
Color
FJ-SC2MG
5 million pixels
Monochrome
FJ-S5MG
5 million pixels
Color
FJ-SC5MG
Camera cable (LAN)
Cable length: 3 m, 5 m, 10 m, 20 m,
40 m
FJ-VSG @M *2
Camera cable
(Power, I/O)
Cable length: 3 m, 5 m, 10 m *1
FJ-VSP @M *2
Media only
CD-ROM
FH-AP1
1 license
---
FH-AP1L
Development environment
Application Producer
Operating environment
• CPU: Intel Pentium Processor (SSE2 or higher)
• OS: Windows 7 Professional (32/64bit) or
Enterprise (32/64bit) or Ultimate (32/64bit),
Windows 8 Pro (32/64bit) or Enterprise (32/64bit),
Windows 8.1 Pro (32/64bit) or Enterprise (32/64bit)
• .NET Framework: .NET Framework 3.5 or higher
• Memory: At least 2 GB RAM
Available disk space: At least 2 GB
• Camera interface: Ethernet 1000BASE-T
• Display: XGA (1024 × 768), True Color (32-bit) or higher
• Optical drive: CD/DVD drive
---
• CPU: Intel Pentium Processor (SSE2 or higher)
• OS: Windows 7 Professional (32/64bit) or
Enterprise (32/64bit) or Ultimate (32/64bit),
Windows 8 Pro (32/64bit) or Enterprise (32/64bit),
Windows 8.1 Pro (32/64bit) or Enterprise (32/64bit)
• .NET Framework: .NET Framework 3.5 or higher
• Memory: At least 2 GB RAM
Available disk space: At least 2 GB
• Browser: Microsoft® Internet Explorer 6.0 or later
• Display: XGA (1024 × 768), True Color (32-bit) or higher
• Optical drive: CD/DVD drive
• The following operating environment is required to use
the camera [email protected]@@G.
Camera interface: Ethernet 1000BASE-T
• The following software is required to customize the
software:
Microsoft® Visual Studio® 2010 Professional, or
Microsoft® Visual Studio® 2008 Professional, or
Microsoft® Visual Studio® 2012 Professional
*1. 10-m cable can be used with 300,000-pixel cameras FJ-SCG/SG and 2-million pixel cameras FJ-SC2MG/S2MG.
*2. The boxes in the model numbers are replaced by the cable length: 3 m = 3, 5 m = 5, 10 m = 10, 20 m = 20 and 40 m = 40
1
FJ Series
Lenses
High-resolution, Low-distortion Lenses
3Z4S-LE
SV-0614H
Model
Appearance/
Dimensions
(mm)
42 dia.
3Z4S-LE
SV-0814H
39 dia.
57.5
3Z4S-LE
SV-1214H
30 dia.
52.5
51.0
3Z4S-LE
SV-1614H
47.5
30 dia.
3Z4S-LE
SV-2514H
3Z4S-LE
SV-3514H
30 dia.
44 dia.
36.0
45.5
3Z4S-LE
SV-5014H
44 dia.
57.5
3Z4S-LE
SV-7525H
3Z4S-LE
SV-10028H
39 dia.
36 dia.
66.5[WD:п] to
71.6[WD:2000]
42.0[WD:∞] to
54.6[WD:1200]
Focal length
6mm
8mm
12mm
16mm
25mm
35mm
50mm
75mm
Brightness
F1.4
F1.4
F1.4
F1.4
F1.4
F1.4
F1.4
F2.5
F2.8
M40.5
P0.5
M35.5
P0.5
M27
P0.5
M27
P0.5
M27
P0.5
M35.5
P0.5
M40.5
P0.5
M34.0
P0.5
M37.5
P0.5
3Z4S-LE
SV-7527V
3Z4S-LE
SV-10035V
Filter size
100mm
CCTV Lenses
3Z4S-LE
SV-03514V
Model
Appearance/
Dimensions
(mm)
29.5 dia.
Focal length
Brightness
3Z4S-LE
SV-04514V
30.4 29.5 dia.
29.5 29 dia.
3.5mm
F1.4
4.5mm
F1.4
---
---
Filter size
3Z4S-LE
SV-0614V
3Z4S-LE
SV-0813V
28 dia.
30
6mm
F1.4
M27
P0.5
3Z4S-LE
SV-1214V
34.0 29 dia.
8mm
F1.3
M25.5
P0.5
3Z4S-LE
3Z4S-LE
SV-1614V SV-2514V
29.5 29 dia.
12mm
F1.4
M27
P0.5
24.0 29 dia.
16mm
F1.4
M27
P0.5
24.5
3Z4S-LE
SV-3518V
29 dia.
25mm
F1.4
M27
P0.5
33.5[WD:∞]
37.5[WD:300
3Z4S-LE
SV-5018V
32 dia.
35mm
F1.8
M27
P0.5
37.0[WD:п]
39.4[WD:100
50mm
F1.8
M30.5
P0.5
32 dia.
42.0[WD:∞] to
44.4[WD:1000]
32 dia.
75mm
F2.7
M30.5
P0.5
43.9[WD:∞] to
46.3[WD:1000]
100mm
F3.5
M30.5
P0.5
Extension Tubes
Model
Contents
3Z4S-LE SV-EXR
Set of 7 tubes(40 mm, 20 mm, 10 mm, 5 mm, 2.0 mm, 1.0 mm, and 0.5 mm)
Maximum outer diameter: 30 mm dia.
• Do not use the 0.5-mm, 1.0-mm, and 2.0-mm Extension Tubes attached to each other. Since these Extension Tubes are placed over the threaded section of
the Lens or other Extension Tube, the connection may loosen when more than one 0.5-mm, 1.0-mm or 2.0-mm Extension Tube are used together.
• Reinforcement is required to protect against vibration when Extension Tubes exceeding 30 mm are used.
Ratings and Performance
FJ-SCG/SG
Imaging element
FJ-SC2MG/S2MG
FJ-SC5MG/S5MG
Progressive scan 1/3-inch CCD
Progressive scan 1/1.8-inch CCD
Progressive scan 2/3-inch CCD
656 (H) × 492 (V): Color
1616 (H) × 1234 (V): Color
2448 (H) × 2056 (V): Color
656 (H) × 494 (V): Monochrome
1616 (H) × 1236 (V): Monochrome
2448 (H) × 2058 (V): Monochrome
Pixel size
7.4 (μm) × 7.4 (μm)
4.4 (μm) × 4.4 (μm)
3.45 (μm) × 3.45 (μm)
Synchronous system
Internal synchronous
Frame rate
90fps
20fps
17fps
Number of uptake lines
Min 2 line to Effective pixels (V) (2 lines interval)
Gain
0dB to +25dB
0dB to +18dB
0dB to +14dB
Shutter speed
17 μs to 1 s
25 μs to 1 s
29 μs to 10 s
Video output
Digital 8 bit
Trigger input
External trigger / Software trigger (Ethernet)
External output
Strobe trigger / Trigger READY
I/F
Gigabit Ethernet (1 Gbit/s)
Lens mount
C mount
Effective pixels
Power voltage
Pick-up voltage when
camera cable FJ-VSP
is used
Power consumption
PoE/12VDC±10%
11.3 to 13.2VDC
3m
5m
11.8 to 13.8VDC
11.3 to 13.2VDC
10 m
Cannot be used.
PoE supply: 3.6 W
PoE supply: 3.8 W
Power and I/O connector supply: 3.1 W Power and I/O connector supply: 3.2 W
Power and I/O connector supply: 6.4 W
Vibration resistance
10 to 150 Hz, Half amplitude 0.35 mm (Acceleration: Max. 50 m/s2), 3 directions (X/Y/Z) 8 minutes each, 10 times
Impact resistance
150 m/s2, 6 directions (Up and Down, Right and Left, Back and Forth) 3 times each
Ambient temperature
In operation: 0 to 40°C (Chassis surface temperature should be 55°C or lower.)
In storage: -25 to +65°C (no freezing or condensation)
Ambient humidity
In operation and storage: 35 to 85% RH each (no condensation)
Ambient environment
No corrosive gas
Protective structure
IEC60529 standard IP30
Weight
Approx. 90 g
Approx. 220 g
2
FJ Series
Processing Items
Group
Icon
Processing Item
Search
Used to identify the shapes and calculate the
position of measurement objects.
Flexible Search
Recognizing the shapes of workpieces with
variation and detecting their positions.
Sensitive Search
Search a small difference by dividing the search
model in detail, and calculating the correlation.
ECM Search
Used to search the similar part of model form input
image. Detect the evaluation value and position.
EC Circle Search
Shape Search II
Shape Search III
Icon
Processing Item
Position
Compensation
Used when positions are differed.
Correct measurement is performed by correcting
position of input images.
Filtering
Used for processing images input from cameras in
order to make them easier to be measured.
Backgrond
Suppression
To enhance contrast of images by extracting color
in specified brightness.
Track brightness change of entire screen and
Brightness Correct
remove gradual brightness change such as
Filter
uneven brightness.
Compensate
image
Color Gray Filter
Color image is converted into monochrome images
to emphasize specific color.
Extract Color Filter
Convert color image to color extracted image or
binary image.
Anti Color Shading
To remove the irregular color/pattern by
uniformizing max.2 specified colors.
Stripes Removal
Filter II
Remove the background pattern of vertical,
horizontal and diagonal stripes.
EC Corner
This processing item measures a corner position
(corner) of a workpiece.
Polar
Transformation
Rectify the image by polar transformation.
Useful for OCR or pattern inspection printed on
circle.
EC Cross
The center position of a crosshair shape is measured using the lines created by the edge information on each side of the crosshair.
Trapezoidal
Correction
Rectify the trapezoidal deformed image.
Classification
Used when various kinds of products on the
assembly line need to be sorted and identified.
Edge Position
Edge Pitch
Scan Edge
Position
Scan Edge Width
Measurement
Extract circles using "round" shape information
and get position, radius and quantity in high
preciseness.
Used to search the similar part of model from input
image regardless of environmental changes.
Detect the evaluation value and position.
Robust detection of positions is possible at highspeed and with high precision incorporating environmental fluctuations, such as differences in individual shapes of the workpieces, pose fluctuations,
noise superimposition and shielding.
Group
How the alignment marks would move on the imMachine Simulator age when each stage or robot axis is controlled
can be checked.
The registered model image and measurement imImage Subtraction age are compared and only the different pixels are
extracted and converted to an image.
Process the images acquired from cameras in order to make them easier to measure. This processAdvanced filter
ing item consolidates existing image conversion
filtering into one processing item and adds extra
functions.
Measure position of measurement objects
according to the color change in measurement
area.
Detect edges by color change in measurement
area. Used for calculating number of pins of IC and
connectors.
Measure peak/bottom edge position of workpieces
according to the color change in separated
measurement area.
Measure max/min/average width of workpieces
according to the color change in separated
measurement area.
Panorama
Unit Macro
Circular Scan
Edge Position
Measure center axis, diameter and radius of
circular workpieces.
Circular Scan
Edge Width
Measure center axis, width and thickness of ring
workpieces.
Intersection
Calculate approximate lines from the edge information on two sides of a square workpiece to measure the angle formed at the intersection of the two
lines.
Color Data
Used for detecting presence and mixed varieties of
products by using color average and deviation.
Line Regression
Used for calculating regression line from plural
measurement coodinate.
Gravity and Area
Used to measure area, center of gravity of
workpices by extracting the color to be measured.
Circle Regression
Used for calculating regression circle from plural
measurement coordinate.
Labeling
Used to measure number, area and gravity of
workpieces by extracting registered color.
Precise
Calibration
Used for calibration corresponding to trapezoidal
distortion and lens distortion.
User Data
Used for setting of the data that can be used as
common constants and variables in scene group
data.
Set Unit Data
Used to change the ProcItem data (setting
parameters,etc.) that has been set up in a scene.
Get Unit Data
Used to get one data (measured results, setting
parameters,etc.) of ProcItem that has been set up
in a scene.
Set Unit Figure
Used for re-setting the figure data (model,
measurement area ) registered in an unit.
Get Unit Figure
Used for get the figure data (model, measurement
area ) registered in an unit.
Trend Monitor
Used for displaying the information about results
on the monitor, facilitating to avoid NG and analyze
causes.
Used for saving the measurement images to the
memory and USB memory.
Label Data
Defect
Unit Calculation
Macro
Calculation
Selecting one region of extracted Labeling, and get
that measurement. Area and Gravity position can
be got and judged.
Used for appearance measurement of plain-color
measurement objects such as defects, stains and
burrs.
Precise Defect
Check the defect on the object. Parameters for
extraction defect can be set precisely.
Fine Matching
Difference can be detected by overlapping and
comparing (matching) registered fine images with
input images.
Character Inspect
Recognize character according correlation search
with model image registered in [Model Dictionary].
Date Verification
Reading character string is verified with internal
date.
Model Dictionary
Register character pattern as dictionary.
The pattern is used in [Character Inspection].
Image Logging
2DCode *2
Recognize 2D code and display where the code
quality is poor.
Image Conversion Used for saving the measurement images in JPEG
and BMP format.
Logging
Barcode *1
Recognize barcode, verify and output decoded
characters.
Data Logging
Used for saving the measurement data to the
memory and USB memory.
OCR
Recognize and read characters in images as character information.
Elapsed Time
Used for calculating the elapsed time since the
measurement trigger input.
OCR User
Dictionary
Register dictionary data to use for OCR.
Wait
Processing is stopped only at the set time. The
standby time is set by the unit of [ms].
Circle Angle
Used for calculating angle of inclination of circular
measurement objects.
Focus
Focus setting is supported.
Glue Bead
Inspection
You can inspect coating of a specified color for
gaps or runoffs along the coating path.
Iris
Focus and aperture setting is supported.
Parallelize
A part of the measurement flow is divided into two
or more tasks and processed in parallel to shorten
the measurement time. This processing item is
placed at the top of processing to be performed in
parallel.
Parallelize Task
A part of the measurement flow is divided into two
or more tasks and processed in parallel to shorten
the measurement time. This processing item is
placed immediately before processing to be performed in parallel between Parallelize and Parallelize End.
Statistics
Used when you need to calculate an average of
multiple measurement results.
Support
measurement
Camera image inCapture images from a GigE camera.
put GigE
Input Image
Combine multiple image to create one big image.
Advanced arithmetic processing can be easily
incorporated into workflow as Unit Macro
processing items.
This function is convenient when the user wants to
calculate a value using an original calculation formula or change the set value or system data of a
processing item.
Used when using the judge results and measured
values of ProcItem which are registered in
processing units.
Camera Image
Input HDR
Create high-dynamic range images by acquiring
several images with different conditions.
Camera Switch
To switch the cameras used for measurement.
Not input images from cameras again.
Measurement
Image Switching
To switch the images used for measurement.
Not input images from camera again.
3
FJ Series
Group
Support
measurement
Branch
Output results
Output result
Icon
Processing Item
Referrence Calib
Data
Calibration data and distortion compensation data
held under other processing items can be referenced.
Position Data
Calculation
The specified position angle is calculated from the
measured positions.
Stage Data
Sets and stores data related to stages.
Robot Data
Sets and stores data related to robots.
Vision Master
Calibration
This processing item automatically calculates the
entire axis movement amount of the control equipment necessary for calibration.
PLC Mastoer
Calibration
Calibration data is created using a communication
command from PLC.
Convert Position
Data
The position angle after the specified axis movement is calculated.
Movement Single
Position
The axis movement that is required to match the
measured position angle to the reference position
angle is calculated.
Movement Multi
Points
The axis movements that are required to match the
measured position angles to the corresponding reference position angles are calculated.
Detection Point
Obtains position/angle information by referring to
the coordinate values measured with the Measurement Processing Unit.
Camera
Calibration
By setting the camera calibration, the measurement result can be converted and output as actual
dimensions.
Data Save
The set data can be saved in the controller main
unit or as scene data. The data is held even after
the FH/FZ power is turned off.
Conditional
Branch
Used where more than two kinds of products on
the production line need to detected separately.
End
This ProcItem must be set up as the last
processing unit of a branch.
DI Branch
Same as ProcItem "Branch". But you can change
the targets of conditional branching via external
inputs.
Control Flow
Normal
Set the measurement flow processing into the wait
state in which the specific no-protocol command
can be executed.
Set the measurement flow processing into the wait
Control Flow PLC
state in which the specific PLC Link command can
Link
be executed.
Control Flow
Parallel
Set the measurement flow processing into the wait
state in which the specific parallel command can
be executed.
Control Flow
Fieldbus
Set the measurement flow processing into the wait
state in which the specific Fieldbus command can
be executed.
Selective Branch
Easily branch to multiple destinations.
Data Output
Used when you need to output data to the external
devices such as PLC or PC via serial ports.
Parallel Data
Output
Used when you need to output data to the external
devices such as PLC or PC via parallel ports.
Used when you need to output judgement results
Parallel
to the external devices such as PLC or PC via
Judgement Output
parallel ports.
Fieldbus Data
Output
Outputs data to an external device, such as a
Programmable Controller, through a fieldbus
interface.
Result Display
Used for displaying the texts or the figures in the
camera image.
Display Image File Display selected image file.
Display Last NG
Image
*1
*2
Display the last NG images.
Bar Codes that can be read : JAN/EAN/UPC (including add-on codes),
Code 39, Codabar (NW-7), ITF (Interleaved 2 of 5), Code 93, Code 128,
GS1-128, GS1 DataBar (RSS-14 / RSS Limited / RSS Expanded),
Pharmacode
2D Codes that can be read : Data Matrix (ECC200), QR Code
4
FJ Series
External Dimensions
(Unit: mm)
FJ-SCG/SG/SC2MG/S2MG
14.5
5.77
20
15.77
21.2
8.4
27.87 Dia.
29
14.5
4-M
2D
epth
ETHERNET CONNECTOR
6.6
3
16.5
22
pth 3
2-M2 De
23.7±0.2
POWER AND I/O CONNECTOR
10±0.1
20
12
10±0.1
(6.3)
12
2M
2
54
29
D
ep
th
4
1”-32UNF(C MOUNT)
3-3.5
2-M3
Dia
Depth
3-M
3D
epth
3
15
3
23.7
12±0.2
22±0.2
.5
4-2
Dia
Mounting screw holes
FJ-SC5MG/S5MG
pth
3
-M
3.5
De
26
4
9.7
80.2
ETHERNET CONNECTOR
1"-32UNF(C Mount) 6.45
20
POWER AND I/O CONNECTOR
13.5
2
th
ep
34
D
(5.35)
M
93.15
2-
22
44
15.6
15.9
15.4
29
14.5
3.5
5
4.
26
26±0.2
80.2±0.2
45
3.
th
ia
D
ep
4-
D
M3
3.5
9.7
80.2
Mounting screw holes
5
FJ Series
Optical Chart
5 million-pixel digital camera FJ-SC5MG/S5MG
10,000
SV-0614H
SV-0814H
SV-1214H
SV-1614H
SV-2514H
SV-3514H
SV-5014H
SV-7525H
SV-10028H
t0
t0
t0
Camera distance (mm)
t5
t0
t10
t15
1,000
t20
t30 t25
t40
t20
t10
t25
t30
t15
t30 t25 t20
t40
t0
t10
t40
t50
t50
t0
t5
t0
t5
t15
t0
t0
t5
t2
t10
t1
t20 t15
t30 t25
100
t5
t2
t0.5
t10
t15
t0.5
t5
t2
t1
30
5
10
100
1,000
Field of vision (mm)
2 million-pixel digital camera FJ-SC2MG/S2MG
10,000
SV-0614H
SV-0814H
SV-1214H
SV-1614H
SV-2514H
SV-3514H
SV-5014H
SV-7525H
SV-10028H
t0
t0
t0
Camera distance (mm)
t5
t15
1,000
t30
t50
t50
t25
t0
t0
t5
t25
t20 t15
t30 t25
t15
t0
t5
t10
t30
t25 t20 t15
t30
t40
100
t0
t10
t20
t40
t40
t20
t10
t0
t15
t5
t2
t10
t1
t2
t5
t10
t0
t2
t1
t0.5
t0.5
t5
30
3
10
100
1,000
Field of vision (mm)
6
FJ Series
300,000-pixel digital camera FJ-SCG/SG
10,000
t0
3Z4S-LE
t0
t0
Camera distance (mm)
t5
t50
1,000
t40
t40
t30
t30
t15 t10
t25 t20t15 t10
t20
t25
t5
t0
t0
t0
t2
t0
t0
t50
t5
t10
t40 t30
t25
100
t25 t20
t20
t5
t5
t5
t0
t1
t2
t1 t0.5
t1
t0.5
t0.5
t2
t1
t1
2
t0
t10
t15
30
t1
t0.5
t1
t2
t15
t10
t20 t15
SV-03514V
SV-04514V
SV-0614V
SV-0813V
SV-1214V
SV-1614V
SV-2514V
SV-3518V
SV-5018V
SV-7527V
SV-10035V
t0
t0.5
t0.5
10
100
1,000
Field of vision (mm)
„ Meaning of Optical Chart
The X axis of the optical chart shows the field of vision (mm)(Note1),
and the Y axis of the optical chart shows the camera installation distance (mm)(Note2).
Camera
Extension Tube thickness: t (mm)
Lens
Camera
distance (mm)
WD
(mm)
Field of vision (mm)
Y
Field of
vision
X
Note: 1. The lengths of the fields of vision given in the optical charts are the lengths of the Y axis.
2. The vertical axis represents WD for small cameras.
7
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of
sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR
PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S
ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF
PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate
catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use
of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This
information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other
application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the
products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment,
and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A
WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED
USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of
OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of
Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some
specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your
application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or
proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any
manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2011 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
CSM_3_3_1215
Cat. No. Q188-E1-01
0811(0811)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement