advertisement
Digital Camera
EX-Z850
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/.
E
INTRODUCTION
INTRODUCTION
Unpacking
Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible.
Camera
Rechargeable Lithium Ion
Battery (NP-40)
USB Cradle
(CA-31)
Strap
CD-ROM USB Cable AV Cable Basic Reference
• Note that the shape of the AC adaptor depends on the area where you purchased the camera.
* The shape of the AC power cord plug varies according to country or geographic area.
Special AC Adaptor (Inlet Type)
(AD-C52G)
Downloaded From camera-usermanual.com Casio Manuals
AC Power Cord *
2
Special AC Adaptor (Plug-in Type)
(AD-C52J)
INTRODUCTION
Contents
2 INTRODUCTION
Unpacking .................................................................... 2
Features ..................................................................... 10
Precautions ................................................................ 14
19 QUICK START GUIDE
First, charge the battery! ............................................ 19
To configure display language and clock settings ..... 20
To record an image .................................................... 21
To view a recorded image .......................................... 22
To delete an image ..................................................... 22
23 GETTING READY
About This Manual ..................................................... 23
General Guide ............................................................ 24
Camera
USB Cradle
24
27
Downloaded From camera-usermanual.com Casio Manuals
3
Monitor Screen Contents ........................................... 28
REC Modes
PLAY Mode
Changing the Contents of the Monitor Screen
28
32
33
Attaching the Strap .................................................... 35
Power Requirements ................................................. 35
Loading the Rechargeable Battery
To charge the battery
To replace the battery
Power Supply Precautions
Turning the Camera On and Off
Configuring Power Saving Settings
35
37
41
42
45
47
Using the On-screen Menus ...................................... 48
Configuring Display Language and Clock Settings ... 51
To configure display language and clock settings 52
54 BASIC IMAGE RECORDING
Recording an Image ................................................... 54
Specifying the Recording Mode
Aiming the Camera
Recording an Image
54
55
56
Using the Optical Viewfinder ...................................... 62
Using Zoom ................................................................ 63
Optical Zoom
Digital Zoom
63
65
INTRODUCTION
Using the Flash .......................................................... 67
Flash Unit Status
Changing the Flash Intensity Setting
Using Flash Assist
70
71
71
Using the Self-timer ................................................... 73
Specifying Image Size ............................................... 76
Specifying Image Quality ........................................... 77
79 OTHER RECORDING FUNCTIONS
Selecting the Focus Mode ......................................... 79
Using Auto Focus
Using the Macro Mode
Using Pan Focus
Using the Infinity Mode
Using Manual Focus
Using Focus Lock
80
83
84
85
85
87
Exposure Compensation (EV Shift) ........................... 88
Adjusting White Balance ............................................ 89
Configuring the White Balance Setting Manually 91
Specifying the Exposure Mode .................................. 92
Using Aperture Priority AE
Using Shutter Speed Priority AE
Setting Exposure Settings Manually
Exposure Mode Recording Precautions
92
94
96
97
Downloaded From camera-usermanual.com Casio Manuals
4
Using Continuous Shutter .......................................... 97
Using the Normal-Speed Continuous Shutter Mode
Using the High-Speed Continuous Shutter Mode
Using the Flash Continuous Shutter Mode
Using the Zoom Continuous Shutter Mode
25-shot Stop Action Images
(Using the Multi Continuous Shutter Mode)
Continuous Shutter Precautions
98
99
99
100
101
102
Using the BEST SHOT Mode .................................. 103
Displaying Sample Scenes Individually
Creating Your Own BEST SHOT Setup
To delete a BEST SHOT user setup
105
106
108
Reducing the Effects of Hand or Subject
Movement ................................................................. 108
Shooting with High Sensitivity .................................. 110
Recording Images of Business Cards and
Documents (Business Shot) ..................................... 111
Before recording with Business Shot
To use Business Shot
112
112
Restoring an Old Photograph ................................... 113
Before trying to restore an old photograph
To restore an old photograph
113
114
Recording an ID Photo .............................................. 116
Printing an ID Photo 118
Recording a Movie .................................................... 118
Specifying Movie Image Quality
Recording a Standard Movie (Movie Mode)
119
120
INTRODUCTION
Instant Movie Setups
(MOVIE BEST SHOT Mode) .................................... 123
Displaying MOVIE BEST SHOT Sample Scenes
Individually
Creating Your Own MOVIE BEST SHOT Setup
Recording a Short Movie
Recording a Past Movie
124
125
126
129
Shooting with the REC Light .................................... 130
Recording Audio ....................................................... 131
Adding Audio to a Snapshot
Recording Your Voice
131
133
Using the Histogram ................................................ 134
REC Mode Camera Settings ................................... 137
Assigning Functions to the [
왗] and [왘] Keys
Turning the On-screen Grid On and Off
137
138
Turning Image Review On and Off 139
Using Icon Help
Specifying Power On Default Settings
Specifying ISO Sensitivity
Selecting the Metering Mode
Using the Filter Function
Specifying Outline Sharpness
Specifying Color Saturation
Specifying Contrast
Date Stamping Snapshots
Resetting the Camera
139
140
142
143
145
145
146
146
147
148
Using the Shortcut Menu (EX Menu) ....................... 149
Downloaded From camera-usermanual.com Casio Manuals
5
150 PLAYBACK
Basic Playback Operation ........................................ 150
Playing an Audio Snapshot 151
Zooming the Display Image ..................................... 152
Resizing an Image ................................................... 153
Cropping an Image ................................................... 154
Keystone Correction ................................................ 156
Using Color Restoration to Correct the Color of an Old Photograph ............................................... 157
Adjusting White Balance of a Recorded Image ....... 159
Adjusting Image Brightness ..................................... 161
Playing and Editing a Movie .................................... 162
Playing a Movie
Playing Back a Movie with Anti Shake
Editing a Movie
Capturing a Still Image from a Movie
(MOTION PRINT)
162
164
165
168
Displaying the 9-image View ................................... 170
Displaying the Calendar Screen .............................. 171
Playing a Slideshow ................................................. 172
Using the Photo Stand Feature 174
Rotating the Display Image ...................................... 175
INTRODUCTION
Adding Audio to a Snapshot .................................... 177
To re-record audio 178
Playing Back a Voice Recording File ....................... 179
Displaying Camera Images on a TV Screen ........... 180
Selecting the Video Output System 181
183 DELETING FILES
Deleting a Single File ............................................... 183
Deleting All Files ...................................................... 184
185 FILE MANAGEMENT
Folders ..................................................................... 185
Memory Folders and Files 185
Protecting Files ........................................................ 186
To protect a single file
To protect all files in memory
186
187
Using the FAVORITE Folder .................................... 187
To copy a file to the FAVORITE folder
To display a file in the FAVORITE folder
To delete a file from the FAVORITE folder
To delete all files from the FAVORITE folder
187
189
190
190
191 OTHER SETTINGS
Configuring Sound Settings ..................................... 191
To configure sound settings
To set the confirmation tone volume level
To set the audio volume level for movie and audio snapshot playback
191
191
192
Specifying an Image for the Startup Screen ........... 192
Specifying the File Name Serial Number
Generation Method .................................................. 193
Setting the Clock ...................................................... 194
To select your Home Time zone
To set the current time and date
Changing the Date Format
194
195
195
Using World Time ..................................................... 196
To display the World Time screen
To configure World Time settings
196
196
Editing the Date and Time of an Image ................... 197
Changing the Display Language ............................. 198
Changing the Brightness of the Monitor Screen ..... 199
Changing the USB Port Protocol ............................. 200
Configuring [ ] (REC) and [ ] (PLAY) Power
On/Off Functions ...................................................... 201
Formatting Built-in Memory ...................................... 202
Downloaded From camera-usermanual.com Casio Manuals
6
INTRODUCTION
203 USING A MEMORY CARD
Using a Memory Card .............................................. 204
To insert a memory card into the camera
To replace the memory card
Formatting a Memory Card
204
205
206
Copying Files ........................................................... 207
To copy all the files in built-in memory to a memory card
To copy a specific file from a memory card to built-in memory
208
209
210 PRINTING IMAGES
DPOF ......................................................................... 211
To configure print settings for a single image
To configure print settings for all images
212
213
Using PictBridge or USB DIRECT-PRINT ............... 214
Date Printing 218
PRINT Image Matching III ............................................ 219
Exif Print ................................................................... 219
220 VIEWING IMAGES ON A COMPUTER
Using the Camera with a Windows Computer ........ 220
Using the Camera with a Macintosh Computer ....... 228
Using a Memory Card to Transfer Images to a
Computer .................................................................. 233
Memory Data ............................................................ 234
DCF Protocol
Memory Folder Structure
Image Files Supported by the Camera
234
235
236
Downloaded From camera-usermanual.com Casio Manuals
7
INTRODUCTION
238 USING THE CAMERA WITH A COMPUTER
Using the Camera with a Windows Computer ........ 238
Selecting the Software You Need
Computer System Requirements
Managing Images on a PC
Retouching, Reorienting, and Printing a Snapshot
Playing a Movie
Editing a Movie
Viewing User Documentation (PDF Files)
User Registration
Exiting the Menu Application
238
240
242
245
247
250
252
252
252
Using the Camera with a Macintosh Computer ....... 253
Selecting the Software You Need
Computer System Requirements
Managing Images on a Macintosh
Playing Back a Movie on your Macintosh
Viewing User Documentation (PDF Files)
To register as a camera user
253
254
255
256
258
258
259 APPENDIX
Menu Reference ....................................................... 259
Indicator Lamp Reference ....................................... 262
Troubleshooting Guide ............................................. 265
If you have problems installing the USB driver...
Display Messages
270
271
Specifications ........................................................... 273
Downloaded From camera-usermanual.com Casio Manuals
8
INTRODUCTION
IMPORTANT!
• The contents of this manual are subject to change without notice.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise due to the use or malfunction of the
EX-Z850.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader and/or
Photohands.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss.
• Note that the example screens and product illustrations shown in this User’s Guide may differ somewhat by the screens and configuration of the actual camera.
• The SD logo is a registered trademark.
• Windows, Internet Explorer, Windows Media, and
DirectX are registered trademarks of Microsoft
Corporation.
Downloaded From camera-usermanual.com Casio Manuals
9
• Macintosh and QuickTime are trademarks of Apple
Computer, Inc.
• MultiMediaCard is a trademark of Infineon
Technologies AG of Germany, and licensed to the
MultiMediaCard Association (MMCA).
• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• Ulead is a trademark of Ulead Systems,Inc.
• Other company, product and service names used herein may also be trademarks or service marks of others.
• Photo Loader and Photohands are the property of
CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD.
INTRODUCTION
■ LCD Panel
The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of
99.99%. This means that less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on).
■ Copyright Restrictions
Except for the purposes of your own personal enjoyment, unauthorized copying of snapshot files, movie files, and audio files violates copyright laws and international contracts.
Distribution to third parties of such files over the Internet without permission of the copyright holder, whether for profit or for free, violates copyright laws and international contracts.
Downloaded From camera-usermanual.com Casio Manuals
10
Features
• 8.1 million effective pixels
The CCD provides 8.32 million total pixels for images of outstanding resolution and detail.
• 2.5-inch TFT color LCD monitor screen
• 8.0MB built-in memory
Images can be recorded without using a memory card.
• Bundled with a USB Cradle
The bundled USB cradle can be used to charge the camera’s battery (page 37), to view images on a TV screen (page 180), and to transfer images to a computer
(page 238). A Photo Stand feature lets you view images while the camera is on the cradle (page 174).
• REC mode or PLAY mode power up (page 45)
Press [ ] (REC) or [ ] (PLAY) to turn on the camera and enter the mode you want to use.
• AF assist light (page 59)
Improves auto focus accuracy when shooting under dim lighting.
• 24X zoom (page 63)
3X optical zoom, 8X digital zoom
• Flash Assist (page 71)
This feature compensates when flash intensity is not strong enough, so images are better illuminated.
B
INTRODUCTION
• Triple Self-timer (page 73)
The self-timer can be set up to repeat three times, automatically.
• Auto Macro (pages 81, 83)
Auto Macro automatically switches to the macro mode when the distance between the camera and subject it shorter than the Auto Focus range.
• Quick Shutter (page 81)
When you press the shutter button all the way down without pausing, the camera immediately records the image without waiting for Auto Focus to be performed.
This helps to avoid missing a special moment while you wait for the camera to Auto Focus.
• Auto Focus Area Selection (page 82)
When “ Multi” is selected for the Auto Focus area, the camera takes simultaneous meter readings at nine different points and automatically selects the best one.
• Three exposure modes (page 92)
Three exposure modes control aperture and shutter speed: aperture priority AE (A mode), shutter speed priority AE (S mode), and manual exposure (M mode).
• Five continuous shutter modes (page 97)
In addition to normal-speed continuous shutter, you can also select high-speed continuous shutter, flash continuous shutter, zoom continuous shutter, or multi continuous shutter.
• BEST SHOT (page 103)
Simply select one of a collection of built-in sample scenes and the camera sets up for the scene you selected. It’s the simple way to set up for beautiful snapshots quickly and easily. New BEST SHOT sample scenes include setups for High Sensitivity and Anti Shake.
• Business Shot (page 111)
Business Shot automatically corrects rectangular shapes when recording the image of a business card, document, whiteboard, or similar subjects from an angle.
• Restoring an Old Photograph (page 113)
You can use the procedure in this section to restore an old, faded photograph with the color provided by modern digital camera technology.
• ID Photo Feature (page 116)
After recording a portrait, you can print a page that contains a number of different versions in standard ID photo dimensions.
Downloaded From camera-usermanual.com Casio Manuals
11
INTRODUCTION
• Movie recording with audio (page 118)
VGA size, 30 fps, MPEG-4 format
• A choice of movie recording functions (page 118)
In addition to a Movie mode for normal movie recording, you can also use the MOVIE BEST SHOT mode to select one of the built-in sample movie scenes for setup for the scene you selected. MOVIE BEST SHOT scenes include
“Short Movie” (for recording short-burst movies) and “Past
Movie” (whose recording starts from about five seconds before the shutter button is pressed).
• Audio Snapshot mode (page 131)
Use this mode to record snapshots that also include audio.
• Voice Recording (page 133)
Quick and easy recording of voice input.
• Real-time RGB histogram (page 134)
An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness, which makes shooting under difficult lighting conditions easier than ever before.
• EX Menu (page 149)
EX Menu gives you short-cut menu access to four frequently-used settings.
• Keystone Correction (page 156)
A simple operation corrects for keystoning, which occurs when you record the image of a blackboard or poster from an angle.
• Color Correction (page 157)
Simply record the image of an old photograph to restore its colors.
• Built-in Image Editing Functions
Simple operations let you change the white balance
(page 159) and brightness (page 161) of images after they are recorded.
• MOTION PRINT (page 168)
Capture frames from a movie and create still images that are suitable for printing.
• Calendar screen (page 171)
A simple operation displays a full-month calendar on the camera’s monitor screen. Each day of the full-month calendar shows a thumbnail of the first file recorded for that date, which helps to make searching for a particular file quicker and easier.
• World Time (page 196)
A simple operation sets the current time for your current location. You can select from among 162 cities in 32 time zones.
Downloaded From camera-usermanual.com Casio Manuals
12
INTRODUCTION
• Support for SD memory cards and MMC (MultiMedia
Cards) for memory expansion (page 203)
• Digital Print Order Format (DPOF) (page 211)
Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services.
• PictBridge and USB DIRECT-PRINT support
(page 214)
Connect directly to a PictBridge or USB DIRECT-PRINT compatible printer and you can print images without going through a computer.
• PRINT Image Matching III Compatible (page 219)
Images include PRINT Image Matching III data (mode setting and other camera setup information). A printer that supports PRINT Image Matching III reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them.
• DCF Data Storage (page 234)
DCF (Design rule for Camera File system) data storage protocol provides image compatibility between the digital camera and printers.
• Bundled with Photo Loader and Photohands
(pages 242, 245, 255)
Your camera comes bundled with Photo Loader, the popular application that automatically loads images from your camera to your PC. It also comes with Photohands, and application that makes image retouching quick and easy.
Downloaded From camera-usermanual.com Casio Manuals
13
INTRODUCTION
Precautions
■ General Precautions
Be sure to observe the following important precautions whenever using the EX-Z850.
All references in this manual to “camera” refer to the
CASIO EX-Z850 Digital Camera.
• Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the risk of serious accident.
• Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electric shock when exposed. Always leave maintenance and repair work up to a CASIO authorized service center.
• Keep the small parts and accessories of this camera out of the reach of small children. If swallowed accidentally, contact your physician immediately.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so can interfere with the driver’s vision and create the risk of accident.
• Never fire the flash while it is too close to the subject’s eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject.
• Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the risk of fire and electric shock. Never use the camera outdoors in the rain or snow, at the seashore or beach, in the bathroom, etc.
• Should foreign matter or water ever get into the camera, immediately turn it off. Next, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock.
• Should you ever notice smoke or a strange odor coming out of the camera, immediately turn it off. Next, taking care you do not burn your fingers, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. After making sure there is no more smoke coming from the camera, take it to your nearest CASIO authorized service center for repair. Never attempt your own maintenance.
Downloaded From camera-usermanual.com Casio Manuals
14
INTRODUCTION
• Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera.
• Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater.
• At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the risk of fire.
• If the camera’s case should ever become cracked due to dropping it or otherwise subjecting it to rough treatment, immediately turn it off. Next, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center.
• Never use the camera inside of an aircraft or in any other area where its use is prohibited. Doing so creates the risk of accident.
• Physical damage and malfunction of this camera can cause the data stored in its memory to be deleted. Always keep backup copies of data by transferring them to personal computer memory.
• Never open the battery cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while an image is being recorded. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory.
Downloaded From camera-usermanual.com Casio Manuals
15
INTRODUCTION
■ Test for proper operation before using the
camera!
Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly.
■ Data Error Precautions
• Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in file memory.
— Removing the battery or memory card, or setting the camera onto the USB cradle while the camera is performing a record or memory access operation
— Removing the battery, removing the memory card, or placing the camera onto the USB cradle while the green operation lamp is still flashing after you turn off the camera
— Disconnecting the USB cable, removing the camera from the USB cradle, or disconnecting the AC adaptor from the USB cradle while a data communication operation is being performed
— Low battery power
— Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor screen (page 271). Follow the instructions provided by the message to eliminate the cause of the error.
Downloaded From camera-usermanual.com Casio Manuals
16
INTRODUCTION
■ Operating conditions
• This camera is designed for use in temperatures ranging from 0
°C to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject to temperature extremes
— Inside of a closed vehicle, especially one parked in the sun
— In areas subject to strong vibration
■ Condensation
• When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation.
• To keep condensation from forming, place the camera into a plastic bag before moving it into a location that is much warmer or colder than your current location. Leave it in the plastic bag until the air inside the bag has a chance to reach the same temperature as the new location. If condensation does form, remove the battery from the camera and leave the battery cover open for a few hours.
Downloaded From camera-usermanual.com Casio Manuals
17
INTRODUCTION
■ Power Supply
• Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported.
• This camera does not have a separate battery for the clock. The date and time will reset whenever the camera is not supplied power by the battery and/or the USB cradle for about 24 hours. Be sure to reconfigure these settings after power is interrupted (page 194).
■ Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lens, and does not indicate malfunction of the camera.
■ Caring for your camera
• Fingerprints, dust, or any other soiling of the lens can interfere with proper image recording. Never touch the lens with your fingers. You can remove dust particles from the lens surface by using a lens blower to blow them off. Next, wipe the surface of the lens with a soft lens cloth.
• Fingerprints, dirt, and other foreign matter on the flash can interfere with proper operation of the camera. Avoid touching the flash. If the flash becomes dirty, wipe it clean with a soft, dry cloth.
• If the exterior of the camera needs cleaning, wipe it with a soft, dry cloth.
■ Other
• The camera may become slightly warm during use. This does not indicate malfunction.
Downloaded From camera-usermanual.com Casio Manuals
18
QUICK START GUIDE
QUICK START GUIDE
First, charge the battery!
1.
Load the battery into the camera
(page 35).
1
2.
Place the camera onto the USB cradle to charge the battery (page 37).
• Note that the shape of the AC adaptor depends on the area where you purchased the camera.
• It takes about 180 minutes to achieve a full charge.
1
Inlet Type
2
2
Stopper
○ ○ ○ ○ ○ ○ ○ ○
1
Plug-in Type
○ ○ ○ ○ ○ ○ ○ ○
[CHARGE] lamp
Charging: Lights red
Charging Complete: Lights green
3
Downloaded From camera-usermanual.com Casio Manuals
19
QUICK START GUIDE
To configure display language and clock settings
• Be sure to configure the following settings before using the camera to record images.
See page 51 for details.
• If you make a mistake when setting the language or clock with the following procedure, you will need to use the camera’s menu to individually change the language (page 198) or clock (page 194) settings.
1.
2.
3.
Press the power button to turn on the camera.
Use [
왖], [왔], [왗], and [왘] to select the language
you want.
Press [SET] to register the language setting.
1
4.
Use [
왖], [왔], [왗], and [왘] to select the geographical
area you want, and then press [SET].
5.
Use [
왖] and [왔] to select the city you want, and
then press [SET].
6.
Use [
왖] and [왔] to select the summer time (DST)
setting you want, and then press [SET].
2, 3, 4, 5, 6, 7, 8, 9
[
왖]
[
왗]
[
왔]
[
왘]
[SET]
7.
Use [
왖] and [왔] to select the date format setting
you want, and then press [SET].
8.
Set the date and the time.
9.
Press [SET] to register the clock settings and exit the setting screen.
Downloaded From camera-usermanual.com Casio Manuals
20
C
QUICK START GUIDE
To record an image
Snapshot mode icon
See page 54 for details.
Focus frame
Green operation lamp
1
3
4
1.
Press [ ] (REC).
• This enters the REC (recording) mode.
2.
Align the mode dial with “ ” (Snapshot mode).
3.
Point the camera at the subject, use the monitor screen or viewfinder to compose the image, and then press the shutter button half way.
• When the camera finishes its Auto Focus operation, the focus frame will turn green and the green operation lamp lights.
4.
Holding the camera still, gently press the shutter button all the way down.
2
Before using a commercially available memory card, be sure to first format it using the camera’s formatting procedure. For details about formatting a memory card, see page 206.
Downloaded From camera-usermanual.com Casio Manuals
21
QUICK START GUIDE
To view a recorded image
See page 150 for details.
1
To delete an image
1
See page 183 for details.
2
1.
Press [ ] (PLAY).
• This enters the PLAY (playback) mode.
2.
Use [
왗] and [왘] to scroll through the
images.
Downloaded From camera-usermanual.com Casio Manuals
2, 3, 4, 5
1.
Press [ ] (PLAY).
2.
Press [
왔] ( ).
3.
Use [
왗] and [왘] to display the image you want to
delete.
4.
Use [
왖] and [왔] to select “Delete”.
• To exit the image delete operation without deleting anything, select “Cancel”.
5.
Press [SET] to delete the image.
22
GETTING READY
GETTING READY
This section contains information about things you need to know about and do before trying to use the camera.
About This Manual
This section contains information about the conventions used in this manual.
■ Terminology
The following table defines the terminology used in this manual.
This term as used in this manual:
“camera”
“file memory”
“battery”
“charger”
Means this:
The CASIO EX-Z850 Digital
Camera
The location where the camera is currently storing images you record (page 56)
The NP-40 Rechargeable
Lithium Ion Battery
The optionally available CASIO
BC-30L charger
Downloaded From camera-usermanual.com Casio Manuals
23
This term as used in this manual:
“a REC mode”
“digital noise”
Means this:
The currently selected recording mode (Snapshot,
BEST SHOT, Movie, MOVIE
BEST SHOT, Voice Recording)
Tiny flecks or “snow” in a recorded image or on the monitor screen, which makes the image look grainy.
■ Button Operations
Button operations are indicated by the button name inside of brackets ([ ]).
■ On-screen Text
On-screen text is always enclosed by double quotation marks (“ ”).
■ Supplementary Information
•
•
IMPORTANT! indicates very important information you need to know in order to use the camera correctly.
NOTE
indicates information that is useful when operating the camera.
GETTING READY
■ File Memory
The term “file memory” in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations.
• The camera’s built-in flash memory
• An SD memory card loaded in the camera
• A MultiMediaCard loaded in the camera
For more information about how the camera stores images, see page 235.
General Guide
The following illustrations show the names of each component, button, and switch on the camera.
Camera
■ Front
2 3 4 5 6
Downloaded From camera-usermanual.com Casio Manuals
1
24
8
1
Zoom controller
2
Shutter button
3
Power button
4
Flash
5
AF assist light/REC light/ self-timer lamp
7
6
Finder
7
Lens
8
Microphone
GETTING READY
■ Back
9 0 A B C
■ Side
9
I
H
G
F
D
E
[
왖]
[
왗]
[
왔]
Finder
0
Operation lamp
A
[ ] (PLAY mode) button
B
[ ] (REC mode) button
C
Mode dial
D
Strap ring
E
[SET] button
[
왘]
[SET]
F
[
왖][왔][왗][왘]
G
[DISP] button
H
[MENU] button
I
Monitor Screen
Downloaded From camera-usermanual.com Casio Manuals
25
J
K
L
J
Speaker
K
[ ] (Continuous shutter) button
L
[EX] button
GETTING READY
■ Bottom
M
Stopper
N
Memory card slot
O
Battery compartment
P
Battery cover
Q
Connector
R
Tripod screw hole
* Use this hole when attaching to a tripod.
M
R Q P ON
Downloaded From camera-usermanual.com Casio Manuals
26
GETTING READY
USB Cradle
Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks.
• Battery charging (page 37)
• Viewing of images using the Photo Stand slideshow feature (page 174).
• TV connectability for viewing of images on a television screen (page 180).
• Direct connection to a printer for printing (page 215)
• Automatic transfer of images to a computer (page 220)
IMPORTANT!
• Use only the USB cradle (CA-31) that comes with the camera. Other USB cradles are not supported.
■ Front
1
2
3
5 4
■ Back
1
Camera connector
2
[USB] lamp
3
[USB] button
4
[CHARGE] lamp
5
[PHOTO] button
6
[DC IN 5.3V]
(AC adaptor connector)
7
[ ] (USB port)
8
[AV OUT]
(AV output port)
6
7
8
Downloaded From camera-usermanual.com Casio Manuals
27
GETTING READY
F
E
D
Monitor Screen Contents
The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
• Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen contents actually produced on the camera.
REC Modes
■ Screen Indicators
1 2 3 4 5 67 8 9
C
0
A
B
1
Flash mode indicator
(page 67)
None Auto Flash
Flash Off
Flash On
High-power Flash
Soft Flash
Red-eye reduction
• If the camera detects that flash is required while auto flash is selected, the flash on indicator will appear when the shutter button is pressed half way.
2
Focus mode indicator
(page 79)
Auto Focus
Macro
Pan Focus
Infinity
Manual Focus
• appears only during movie recording.
• When you select Auto Focus with Key Customize (page
137), appears only briefly, and then disappears from the display.
3
White balance indicator
(page 89)
AWB
Auto
Daylight
Cloudy
Shade
Day White
Daylight
Tungsten
Manual
• When you select Auto with
Key Customize (page 137),
AWB
appears only briefly, and then disappears from the display.
4
Continuous Shutter mode (page 97)
Z
Single shot
Normal-speed
Continuous Shutter
High-speed
Continuous Shutter
Flash Continuous
Shutter
Zoom Continuous
Shutter
Multi Continuous
Shutt e r
5
Self-timer (page 73)
None 1-Image
10 s
2 s x 3
Self-timer 10 sec
Self-timer 2 sec
Triple self-timer
Downloaded From camera-usermanual.com Casio Manuals
28
GETTING READY
6
REC modes (page 54)
Snapshot
BEST SHOT
Aperture Priority AE
Shutter Speed Priority AE
Manual Exposure
Movie
MOVIE BEST SHOT
Short Movie
Past Movie
Audio Snapshot
Voice Recording
• and appear when you select the “Short Movie” or
“Past Movie” MOVIE BEST
SHOT scene (page 123).
0
• Snapshots: Image quality
(page 77)
F : Fine
N : Normal
E : Economy
• Movies: Image quality
(page 119)
HQ : High Quality
NORMAL : Normal
LP : Long Play
A
REC Light indicator
(page 130)
Auto
On
None Off
B
Date and time
(page 194)
7
Metering mode indicator
(page 143)
None Multi
Center Weighted
Spot
C
Battery capacity
(page 40)
D
Histogram (page 134)
E
Anti Shake indicator
(page 108)
8
• Snapshots: Image size
(page 76)
• Movies: Recording time
(page 121)
9
• Snapshots: Memory capacity
(pages 58, 273)
• Movies:
Remaining recording time
(page 120)
F
Focus frame
(page 57)
• Focusing complete: Green
• Focusing failed: Red
Downloaded From camera-usermanual.com Casio Manuals
29
NOTE
• Changing the setting of any one of the following functions will cause Icon Help (page 139) text to appear on the monitor screen. You can turn off Icon
Help if you want.
— Focus mode, White balance, Self-timer, Metering,
REC modes
— EX menu screen (page 149) image size, white balance, AF area
GETTING READY
G
■ Exposure Panel
The exposure panel is an area in the lower right corner of the REC modes monitor screen that shows various adjustable parameters. You can also use the exposure panel to adjust exposure settings.
H
I
J
K
G
Digital zoom indicator (page 65)
H
ISO sensitivity (page 142)
I
Aperture value (pages 31, 58, 93, 96)
J
Shutter speed value (pages 31, 58, 95, 96)
K
Zoom indicator (page 65)
• Left side indicates optical zoom.
• Right side indicates digital zoom.
NOTE
• An out of range shutter speed, aperture, or ISO sensitivity setting causes the corresponding monitor screen value to turn amber.
Downloaded From camera-usermanual.com Casio Manuals
30
Exposure
Panel
• The following explains the items that appear on the exposure panel. Note that the current REC mode determines which items appear.
GETTING READY
1
Aperture value (pages 93, 96)
Use this item to adjust the aperture.
• The aperture value is displayed in the exposure panel when the mode dial is set to “A” (aperture priority AE) or “M”
(manual exposure).
Aperture value
2
Shutter speed (pages 95, 96)
Use this item to adjust the shutter speed.
• The shutter speed is displayed in the exposure panel when the mode dial is set to “S” (shutter speed priority AE) or
“M” (manual exposure).
Shutter speed
3
EV shift (exposure compensation value)
(page 88)
Use this item to adjust the exposure compensation (EV shift) value.
• The EV shift value appears in the exposure panel when the mode dial is set to “A” (aperture priority AE) or “S”
(shutter speed priority AE). The EV shift value also appears when the mode dial is set to any setting other than “M” (manual exposure) when “EV
Shift” is assigned as the “L/R Key” function (page 137).
4
Manual Focus (MF) setting (page 85)
Use this item for adjust focus manually.
• The manual focus setting item is displayed in the exposure panel when manual focus is selected
(indicated by “ ” on the monitor screen) using [
왖] ( ).
EV shift
MF setting
Downloaded From camera-usermanual.com Casio Manuals
31
GETTING READY
PLAY Mode
12 3
F
E
4
5
6
7
8
9
D C B A 0
1
PLAY mode file type
Snapshot
Movie
MOVIE BEST SHOT
Short Movie
Past Movie
Audio Snapshot
Voice Recording
2
Image protection indicator (page 186)
3
Folder name/File name
(page 185)
Example : When a file named
CIMG0023.JPG is stored in a folder named 100CASIO
100-0023
Folder name File name
4
• Snapshots: Image quality
(page 77)
F : Fine
N : Normal
E : Economy
• Movies: Recording time (page 121)
5
• Snapshots: Image Size
(page 76)
• Movies: Image quality
(page 119)
HQ : High Quality
NORMAL : Normal
LP : Long Play
6
ISO sensitivity (page 142)
7
Aperture value
(pages 58, 93, 96)
8
Shutter speed value
(pages 58, 95, 96)
9
Date and time (page 194)
0
Metering mode indicator
(page 143)
Multi
Center Weighted
Spot
A
White balance indicator
(pages 89, 159)
AWB
Auto
Daylight
Cloudy
Shade
Day White
Daylight
Tungsten
Manual
B
Flash mode indicator
(page 67)
Flash On
Flash Off
High-power Flash
Soft Flash
Red-eye reduction
C
REC modes (page 54)
Snapshot
BEST SHOT
D
Battery capacity
(page 40)
E
Histogram (page 134)
F
EV value (page 88)
Downloaded From camera-usermanual.com Casio Manuals
32
GETTING READY
IMPORTANT!
• Some information may not display properly if you display an image that was recorded using a different digital camera model.
Changing the Contents of the Monitor
Screen
Each press of [DISP] changes the contents of the monitor screen as shown below.
■ REC Modes
Indicators on Histogram on
Downloaded From camera-usermanual.com Casio Manuals
33
Monitor screen off Indicators off
GETTING READY
■ PLAY Mode
Indicators on
Indicators off
Histogram/Details on
IMPORTANT!
• Pressing [DISP] will not change monitor screen contents during standby or recording of an audio snapshot.
• The monitors screen cannot be turned off while the camera is in a REC mode using a BEST SHOT scene or with movie recording paused.
• Pressing [DISP] in the Voice Recording REC mode toggles the monitor screen on (“indicators on”) and off. While a Voice Recording file is displayed in the
PLAY mode, pressing [DISP] toggles between
“indicators on” and “indicators off”.
• When playing back the content of a Voice Recording file while “indicators off” is selected (Voice Recording file icon only on the monitor screen), the monitor screen will go black about two seconds after you press [SET] to start playback. The Voice Recording file icon (indicators off) will reappear after playback is complete.
Downloaded From camera-usermanual.com Casio Manuals
34
GETTING READY
Attaching the Strap
Attach the strap to the strap ring as shown in the illustration.
Strap ring
Power Requirements
Your camera is powered by a rechargeable lithium ion battery (NP-40).
Loading the Rechargeable Battery
1.
Slide the battery cover in the direction indicated by the arrow, and then swing it open.
IMPORTANT!
• Be sure to keep the strap around your wrist when using the camera to protect against accidentally dropping it.
• The supplied strap is intended for use with this camera only. Do not use it for any other purpose.
• Never swing the camera around by the strap.
Downloaded From camera-usermanual.com Casio Manuals
35
GETTING READY
2.
Orienting the battery with its
왖 mark pointing
towards the battery compartment, push the stopper out of the way with the side of the battery as you load it into the camera.
3.
Swing the battery cover closed, and then slide it in the direction indicated by the arrow.
Stopper
NP-40
• Push the bottom of the battery, and make sure that the stopper securely locks the battery in place.
IMPORTANT!
• Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported.
The battery is not fully charged when you use the camera for the first time after purchasing it. You need to charge the battery before using the camera for the first time.
Downloaded From camera-usermanual.com Casio Manuals
36
GETTING READY
To charge the battery
1.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then plug it in to a household power outlet.
• Note the shape of the AC adaptor depends on the area where you purchased the camera.
USB Cradle
[DC IN 5.3V]
AC Adaptor
NOTE
• The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V
AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area. If you plan to use the AC adaptor in a geographic area where the power receptacle shape is different from that in your area, replace the AC power cord with one of the other ones that comes with the camera, or purchase a commercially available AC power cord that is compatible with the power outlets in that area.
• Never use the AC adaptor with a voltage converter.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
USB Cradle
AC Adaptor
AC power cord
[DC IN 5.3V]
Downloaded From camera-usermanual.com Casio Manuals
37
GETTING READY
NOTE
• The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad.
• Never use the AC adaptor with a voltage converter.
2.
Turn off the camera.
3.
With the camera positioned with the monitor screen facing forward as shown in the illustration, place it onto the USB cradle.
• Do not place the camera onto the USB cradle while it is turned on.
[CHARGE] lamp
• The [CHARGE] lamp on the USB cradle should turn red, indicating that charging has started. When charging is complete, the [CHARGE] lamp will turn green.
• It takes about 180 minutes to achieve a full charge.
Actual charging time depends on current battery capacity and charging conditions.
4.
After charging is complete, remove the camera from the USB cradle.
Downloaded From camera-usermanual.com Casio Manuals
38
GETTING READY
IMPORTANT!
• Use only the USB cradle (CA-31) that comes with the camera or the optionally available charger (BC-30L) to charge the special NP-40 rechargeable lithium ion battery. Never use any other charging device.
• Use only the bundled AC adaptor. Never use any other type of AC adaptor. Do not use optionally available AD-C30, AD-C40, AD-C620 and AD-C630
AC adaptors with this camera.
• Make sure that the camera connector of the USB cradle is securely inserted into the camera’s connector as far as it will go.
• The [CHARGE] lamp may remain amber colored and the charge operation may not start right away if you try to charge immediately after using the camera
(which causes battery to become warm) or when it is too hot or too cold where you are performing the charge operation. If this happens, simply wait until the battery reaches normal temperature. The
[CHARGE] lamp will turn red and charging will start when the battery temperature returns to the allowable charging temperature range.
• If the [CHARGE] lamp starts flashing red, it means that an error occurs while charging. An error can be caused by any of the following: a problem with the
USB cradle, a problem with the camera, or a problem with the battery or how it is loaded. Remove the camera from the USB cradle and see if it works normally.
• The only operations that can be performed while the camera is on the USB cradle are: battery charging,
Photo Stand, image output to a TV, and USB data communication.
Downloaded From camera-usermanual.com Casio Manuals
39
GETTING READY
■ If the camera does not work normally
This can mean there is a problem with how the battery is loaded. Perform the following steps.
1.
Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth.
2.
Check to make sure that the AC adaptor’s power cord is connected securely to the power outlet and USB cradle.
• If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center.
■ Low Battery Indicator
The following shows how the battery capacity indicator on the monitor screen changes as battery power is used. The
indicator means that remaining battery power is low.
Note that you will not be able to record images while the battery indicator is . Charge the battery immediately whenever either of these indicators appears.
High Low Battery Level
Indicator
IMPORTANT!
• See page 277 for information about battery life.
• Due to differences in the power requirements of each mode, the battery indicator may show a lower level in the PLAY mode than what it shows in a REC mode.
This is normal, and does not indicate malfunction.
Downloaded From camera-usermanual.com Casio Manuals
40
GETTING READY
■ Tips to Make the Battery Last Longer
• If you do not need the flash while recording, select
(flash off) for the flash mode. See page 67 for more information.
• Enable the Auto Power Off and the Sleep features (page
47) to protect against wasting battery power when you forget to turn off the camera.
• Use the “0” monitor screen brightness setting to consume less power (page 199).
To replace the battery
1.
Open the battery cover.
2.
Pull the stopper in the direction indicated by the arrow.
• This will cause the battery to come part way out of the slot.
Stopper
3.
Release the stopper and pull the battery from the camera.
• Take care so you do not drop the battery.
4.
Load a new battery into the camera (page 35).
Downloaded From camera-usermanual.com Casio Manuals
41
GETTING READY
Power Supply Precautions
Note the following precautions when handling or using the battery and the optional charger.
■ Battery Handling Precautions
● SAFETY PRECAUTIONS
Be sure to read the following Safety Precautions before using the battery for the first time.
NOTE
• The term “battery” in this manual refers to the CASIO
NP-40 Rechargeable Lithium Ion Battery.
• Use only the USB cradle (CA-31) that comes with the camera or the optionally available charger (BC-30L) to charge the special NP-40 rechargeable lithium ion battery. Never use any other charging device.
• Failure to observe any of the following precautions while using the battery creates the risk of overheating, fire, and explosion.
— Never use any other type of charger except the optional charger specified for the battery.
— Never try to use the battery to power any device other than this camera.
— Never use or leave the battery near open flame.
— Never place the battery in a microwave oven, throw it into fire, or otherwise expose it to intense heat.
— Make sure the battery is oriented correctly when you load it into the camera or attach it to the optional charger.
— Never carry or store the battery together with items that can conduct electricity (necklaces, pencil lead, etc.)
— Never try to take the battery apart, modify it in any way, or expose it to strong impact.
— Do not immerse the battery in fresh water or salt water.
— Do not use or leave the battery under direct sunlight, in an automobile parked in the sun, or in any other area subject to high temperatures.
Downloaded From camera-usermanual.com Casio Manuals
42
GETTING READY
• Should you ever notice any of the following conditions while using, charging, or storing a battery, immediately remove it from the camera or charger, and keep it away from open flame:
— Fluid leaking
— Emission of a strange odor
— Heat emission
— Battery discoloration
— Battery deformation
— Any other battery abnormality
• If the battery does not achieve full charge after the normal charging time has passed, stop charging.
Continued charging creates the risk of overheating, fire, and explosion.
• Battery fluid can damage your eyes. Should battery fluid get into your eyes accidentally, immediately rinse them with clean tap water and then consult a physician.
• Be sure to read page 37 of this User’s Guide and the instructions that come with the optional charger before using or charging the battery.
• If the battery is to be used by young children, make sure that a responsible adult makes them aware of the precautions and proper handling instructions and make sure that they handle the battery correctly.
• Should fluid from the battery accidentally get onto clothing or your skin, immediately rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin irritation.
Downloaded From camera-usermanual.com Casio Manuals
43
● PRECAUTIONS DURING USE
• The battery is designed for use with this CASIO digital camera only.
• Use only the USB cradle that comes with the camera or the specified optional charger to charge the battery.
Never use any other type of charger for charging.
• Use of a battery in cold environments shortens the operating time you can expect on a full charge. Charge the battery in a location where the temperature is in the range of 10
°C to 35°C (50°F to 95°F). Charging outside this temperature range can cause charging to take longer than normal or even cause charging to fail.
• Very limited operation following a full charge indicates that the battery has reached the end of its service life.
Replace the battery with a new one.
• Never wipe the battery with thinner, benzene, alcohol, or other volatile agents or chemically treated rags.
Doing so can cause deformation of the battery and lead to malfunction.
GETTING READY
● BATTERY STORAGE PRECAUTIONS
• Make sure you remove the battery from the camera when you do not plan to use it for a long time. A battery left in the camera discharges very small amounts of power even when power is turned off, which can lead to a dead battery or the need for longer charging before the next use.
• Store the battery in a cool, dry place (20
°C (68°F) or lower).
● USING THE BATTERY
• See page 37 of this manual or the instructions that come with the optional charger for information about charging procedures and charging times.
• When transporting a battery, keep it either loaded in the camera or stored in its case.
■ USB Cradle and AC Adaptor Precautions
Caution!
• Never use an electrical outlet whose voltage is outside the rating marked on the AC adaptor. Doing so can create the risk of fire or electric shock. Use only the AC adaptor bundled with this camera.
• Do not allow the AC adaptor cord to become cut or damaged, do not place heavy objects on it, and keep it away from heat. A damaged power cord creates the risk of fire and electric shock.
• Never try to modify the AC adaptor cord, or subject it to severe bending, twisting, or pulling. Doing so creates the risk of fire and electric shock.
• Never touch the AC adaptor while your hands are wet. Doing so creates the risk of electric shock.
• Do not overload extension cords or wall outlets. Doing so creates the risk of fire and electric shock.
• Should the cord of the AC adaptor become damaged (exposed internal wiring), contact your dealer or nearest CASIO authorized service center. A damaged AC adaptor cord creates the risk of fire or electric shock.
Downloaded From camera-usermanual.com Casio Manuals
44
GETTING READY
Caution!
• Use the AC adaptor where it will not be splashed with water. Water creates the risk of fire and electric shock.
• Do not place a vase or any other container filled with liquid on top of the AC adaptor.
Water creates the risk of fire and electric shock.
• Make sure you always remove the camera from the USB cradle before connecting or disconnecting the AC adaptor.
• Charging, USB data communication, and using the Photo
Stand feature can cause the AC adaptor to become warm. This is normal and does not indicate malfunction.
• Unplug the AC power cord from the power outlet whenever you are not using it.
• Never place a blanket or any other cover on the AC adaptor. Doing so creates the risk of fire.
Turning the Camera On and Off
■ To turn on the camera
Press the power button, [ ] (REC) or [ ] (PLAY). The green operation lamp will light momentarily, and then power will turn on. The mode the camera enters depends on which button you pressed to turn it on.
To enter this mode at startup:
REC
PLAY [
Press this button to turn on the camera:
Power button or [
] (PLAY)
] (REC)
Power button Green operation lamp
[ ] (PLAY)
[ ] (REC)
Downloaded From camera-usermanual.com Casio Manuals
45
GETTING READY
NOTE
• Pressing [ ] (REC) to turn on the camera enters the REC mode, while pressing [ ] (PLAY) enters the PLAY mode.
• Pressing [ ] (PLAY) while in a REC mode switches to the PLAY mode. The lens retracts about 10 seconds after switching modes.
IMPORTANT!
• If camera power is turned off by the Auto Power Off feature, press the power button, [ ] (REC) or [ ]
(PLAY) to turn it back on again.
• Pressing the power button or [ ] (REC) to turn on the camera also causes the lens to extend. Take care to avoid any interference with the lens operation or allowing anything to strike the lens when it is extended.
■ To turn off the camera
Press the power button to turn off the camera.
NOTE
• You can setup the camera so it does not turn on when you press [ ] (REC) or [ ] (PLAY), or to turn off when you press [ ] (REC) or [ ] (PLAY).
For details, see “Configuring [ ] (REC) and [ ]
(PLAY) Power On/Off Functions” on page 201.
Downloaded From camera-usermanual.com Casio Manuals
46
GETTING READY
Configuring Power Saving Settings
You can configure the settings described below to conserve battery power.
Sleep : Automatically turns off the monitor screen if no operation is performed for a specified amount of time in a REC mode. Performing any button operation causes the monitor screen to turn back on.
Auto Power Off : Turns off power if you do not perform any operation for a specified amount of time.
1.
Turn on the camera.
2.
Press [MENU].
3.
Use [
왗] and [왘] to select the “Set Up” tab.
4.
Use [
왖] and [왔] to select the feature whose
setting you want to configure, and then press
[
왘].
● See “Using the On-screen Menus” (page 48) for
information about how to use menus.
To configure this feature: Select this setting:
Sleep Sleep
Auto Power Off Auto Power Off
5.
Use [
왖] and [왔] to change the currently
selected setting, and then press [SET].
• Available Sleep settings are: “30 sec”, “1 min”, “2 min”, and “Off”.
• Available Auto Power Off settings are: “2 min” and
“5 min”.
• Note that the Sleep feature does not operate in the
PLAY mode.
• Pressing any button while the camera is in the Sleep state immediately turns the monitor screen back on.
Downloaded From camera-usermanual.com Casio Manuals
47
GETTING READY
• The Auto Power Off and Sleep features are disabled in the following cases.
— When the camera is connected to a computer or some other device through the USB cradle
— While a slideshow is in progress
— While playing back a voice recording file
— While a movie is being recorded
— While playing back a movie
NOTE
• You also can conserve battery power by selecting “0” for the monitor screen brightness setting (page 199).
Using the On-screen Menus
Pressing [MENU] displays menus on the monitor screen that you can use to perform various operations. The menu that appears depends on whether you are in a REC mode or the PLAY mode. The following shows an example menu procedure in a REC mode.
1.
Press the power button or [ ] (REC).
• If you want to enter the
PLAY mode instead, press [ ] (PLAY).
Power button
[ ] [ ]
Downloaded From camera-usermanual.com Casio Manuals
48
GETTING READY
2.
Press [MENU].
[MENU]
[
왖]
[
왗]
[
왔]
[
왘]
[SET ]
Selection cursor (indicates the currently selected item)
Tab
Settings
● Menu Screen Operations
When you want to do this:
Move between tabs
Move from the tab to the settings
Move from the settings to the tab
Move between the settings
Display the options available for a setting
Select an option
Apply the setting and exit the menu screen
Apply the setting and return to tab selection
Exit the menu screen
Do this:
Press [
왗] and [왘].
Press [
왔].
Press [
왖].
Press [
왖] and [왔].
Press [
왘] or press [SET].
Press [
왖] and [왔].
Press [SET].
Press [
왗].
Press [MENU].
Downloaded From camera-usermanual.com Casio Manuals
49
GETTING READY
3.
Press [
왗] or [왘] to select the tab you want,
and then press [SET] to move the selection cursor from the tab to the settings.
4.
Use [
왖] and [왔] to
select the feature whose setting you want to configure, and then press [
왘].
• Instead of pressing [
왘], you could also press
[SET].
Example: To select the
“Self-timer” item.
5.
Use [
왖] and [왔] to change the currently
selected setting.
6.
Perform one of the following operations to apply the setting you configured.
To do this:
Apply the setting and exit the menu screen.
Apply the setting and return to feature selection in step 4.
Apply the setting and return to tab selection in step 3.
Perform this key operation:
Press [SET].
Press [
왗].
1. Press [
왗].
2. Use [
왖] to move back up to tab selection.
• See “Menu Reference” on page 259 for more information about menus.
Downloaded From camera-usermanual.com Casio Manuals
50
GETTING READY
Configuring Display Language and Clock
Settings
Be sure to configure the following settings before using the camera to record images.
• Display language
• Home city
• Date Style
• Date and time
Note that the current date and time settings are used by the camera to generate the date and time that are stored along with image data, etc.
IMPORTANT!
• Recording images without configuring the clock settings causes incorrect time information to be registered. Be sure to configure the clock settings before using the camera.
• A built-in backup battery retains the date and time settings of the camera for about 24 hours if the camera is not supplied with power. Date and time settings will be cleared when the backup battery goes dead. The following are the conditions when power is not being supplied to the camera.
— When the rechargeable battery is dead or removed from the camera
— When power is not being supplied to the camera from the USB cradle while the rechargeable battery is dead or removed from the camera
• The date and time setting screen will appear on the monitor screen the next time you turn on the camera after the date and time settings have been cleared. If this happens, reconfigure the date and time settings.
• If you make a mistake when setting the language or clock with the following procedure, you will need to use the camera’s menu to individually change the language (page 198) or clock (page 194) settings.
Downloaded From camera-usermanual.com Casio Manuals
51
GETTING READY
To configure display language and clock settings
1.
Press the power button, [ ] (REC) or
[ ] (PLAY) to turn on the camera.
2.
Use [
왖], [왔], [왗], and
[
왘] to select the
language you want, and then press [SET].
: Japanese
English : English
Français : French
Deutsch : German
Español : Spanish
Italiano : Italian
Português : Portuguese
: Chinese (Complex)
: Chinese (Simplified)
: Korean
3.
Use [
왖], [왔], [왗], and
[
왘] to select the
geographical area where you live, and then press [SET].
4.
Use [
왖] and [왔] to
select the name of the city where you live, and then press [SET].
5.
Use [
왖] and [왔] to select the summer time
(DST) setting you want, and then press [SET].
When you want to do this:
Keep time using summer time
(Daylight Saving Time)
Keep time using standard time
Select this setting:
On
Off
Downloaded From camera-usermanual.com Casio Manuals
52
GETTING READY
6.
Use [
왖] and [왔] to
select the date format setting you want, and then press [SET].
Example: December 24, 2006
To display the date like this:
06/12/24
24/12/06
12/24/06
Select this format:
YY/MM/DD
DD/MM/YY
MM/DD/YY
7.
Set the current date and the time.
To do this:
Change the setting at the current cursor location
Move the cursor between settings
Toggle between 12-hour and 24hour timekeeping
Do this:
Press [
왖] and [왔].
Press [
왗] and [왘].
Press [DISP].
8.
Press [SET] to register the settings and exit the setting screen.
Downloaded From camera-usermanual.com Casio Manuals
53
BASIC IMAGE RECORDING
BASIC IMAGE RECORDING
This section describes the basic procedure for recording an image.
Recording an Image
Specifying the Recording Mode
Your CASIO digital camera has eight recording modes, each of which is described below. Before recording an image, use the mode dial to select the recording mode that suits the type of image you are trying to record.
Mode dial
A
S
M
Snapshot
BEST SHOT
Aperture Priority AE
Shutter Speed Priority AE
Manual Exposure
Voice Recording
MOVIE BEST SHOT
Movie
• (Snapshot)
Use this mode to record still images. This is the mode you should normally use for image recording.
• (BEST SHOT)
Simply select one of a collection of built-in sample scenes and the camera sets up for the scene you selected for beautiful snapshots every time (page 103).
• A (Aperture Priority AE)
In this mode, you select the aperture, and other settings are adjusted accordingly (page 92).
• S (Shutter Speed Priority AE)
In this mode, you select the shutter speed, and other settings are adjusted accordingly (page 94).
• M (Manual Exposure)
This mode gives you total control over aperture and shutter speed settings (page 96).
• (Voice Recording)
Use this mode to record audio only (page 133).
• (MOVIE BEST SHOT)
Simply select one of a collection of built-in sample movie scenes and the camera sets up for the scene you selected for beautiful movies every time (page 123).
• (Movie)
Use this mode to record movies (page 120).
Downloaded From camera-usermanual.com Casio Manuals
54
BASIC IMAGE RECORDING
NOTE
• The icon of the.
currently selected recording mode (like
for the Snapshot mode) is displayed on the monitor screen.
Snapshot mode icon
Aiming the Camera
Use both hands to hold the camera still when shooting an image. Holding the camera with one hand increases the chance of movement, which can blur your images.
• Horizontal Hold the camera still in both hands, with your arms firmly against your sides.
• Vertical When holding the camera vertically, make sure that the flash is above the lens. Hold the camera still with both hands.
Downloaded From camera-usermanual.com Casio Manuals
55
BASIC IMAGE RECORDING
IMPORTANT!
• Make sure your fingers and the strap do not block the flash, microphone, AF assist light/REC light/selftimer lamp or lens.
Flash
AF assist light/REC light/ self-timer lamp
Lens
Recording an Image
Your camera automatically adjusts shutter speed in accordance with the brightness of the subject. Images you record are stored in the camera’s built-in memory, or to a memory card if you have one loaded in the camera.
• When an optionally available SD memory card or
MultiMediaCard (MMC) is loaded in the camera, images are stored on the card (page 203).
After purchasing a memory card, be sure to load it into the camera and format it before trying to use it (page
206).
Microphone
NOTE
• Moving the camera as you press the shutter button or while the Auto Focus operation is being performed
(when you press the shutter button half way) can cause blurring of the image. Press the shutter button carefully, taking care to avoid camera movement.
This is especially important when available lighting is low, which slows down the shutter speed.
Downloaded From camera-usermanual.com Casio Manuals
56
BASIC IMAGE RECORDING
1.
Press the power button or [ ] (REC) to turn on the camera.
Power button [ ]
• This causes an image or a message to appear on the monitor screen, and then enters the currently selected recording mode.
• If the camera is in the PLAY mode when it turns on, the message “There are no files.” will appear if you do not have any images stored in memory yet. In addition, the icon will be visible at the top of the display. If this happens, press [ ] (REC) to enter the currently selected recording mode.
2.
Align the mode dial with “ ” (Snapshot mode) (page 54).
• The (Snapshot mode) icon is displayed on the monitor screen while the Snapshot mode is selected.
Snapshot mode icon
Focus frame
3.
Compose the image on the monitor screen so the main subject is within the focus frame.
• The focusing range of the camera depends on focus mode you are using (page 79).
• You can compose images using either the monitor screen or the optical viewfinder (page 62).
• When using the optical viewfinder to compose images, you can use [DISP] to turn off the monitor screen and conserve battery power.
Downloaded From camera-usermanual.com Casio Manuals
57
BASIC IMAGE RECORDING
4.
Press the shutter button half way to focus the image.
• When you press the shutter button half way, the camera’s
Auto Focus feature automatically focuses the image, and displays the shutter speed value, the aperture value, and the ISO sensitivity.
• You can tell whether the image is focused by observing the focus frame and the green operation lamp.
Shutter button
Green operation lamp
Downloaded From camera-usermanual.com Casio Manuals
58
● Green Operation Lamp and Focus Frame Operation
It means this: When you see this:
Green focus frame
Green operation lamp
Red focus frame
Flashing green operation lamp
The image is in focus.
The image is not in focus.
• The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
Continuous
Shutter mode
White balance
Focus mode
Flash mode
Self-timer
Recording Mode
Metering mode indicator
Memory capacity
Image quality
REC light indicator
Image size
Date and time
ISO sensitivity
Aperture value*
1
Shutter speed value* 2
BASIC IMAGE RECORDING
*1 The size of the opening (aperture) that allows light passing through the lens to reach the CCD. A larger aperture value indicates a smaller opening for light to pass through. The camera adjusts this setting automatically.
*2 The amount of time the shutter remains open, allowing light passing through the lens to reach the CCD. A larger shutter speed value indicates that the shutter remains open longer, which means more light reaches the CCD. The camera adjusts this setting automatically.
5.
After making sure that the image is focused properly, press the shutter button the rest of the way down to record.
• The number of images you can record depends on the image size and the image quality setting you are using
(pages 76, 77, 273).
Shutter button
IMPORTANT!
• When the “REC” tab’s “Quick Shutter” setting is turned on (page 81), the camera immediately records the image without waiting for Auto Focus to be performed when you press the shutter release all the way down without pausing. This helps to ensure that you are able to capture exactly the moment you want.
■ About AF Assist Light
The AF assist light/REC light/ self-timer lamp operates automatically to assist the
Auto Focus operation whenever you are shooting where lighting is dim.
AF assist light/REC light/self-timer lamp
Downloaded From camera-usermanual.com Casio Manuals
59
BASIC IMAGE RECORDING
You can turn the AF assist light on or off. It is recommended that you turn off the AF assist light when recording images of nearby people, etc.
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “REC” tab.
3.
Use [
왖] and [왔] to select “AF Assist Light”,
and then press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Turn on the AF assist light
Turn off the AF assist light
Select this setting:
On
Off
IMPORTANT!
• Do not look directly at the AF assist light/REC light/ self-timer lamp or point it directly at the subject’s eyes.
■ Recording Precautions
• Never open the battery cover or place the camera onto the USB cradle while the green operation lamp is flashing. Doing so not only causes the current image to be lost, it can also corrupt images already stored in file memory and even lead to malfunction of the camera.
• Never remove the memory card while an image is being recorded to the memory card.
• Fluorescent lighting actually flickers at a frequency that cannot be detected by the human eye. When using the camera indoors under such lighting, you may experience some brightness or color problems with recorded images.
• When “Auto” is selected for the ISO sensitivity setting
(page 142), the camera automatically adjusts its sensitivity in accordance with the brightness of the subject. This can cause some digital noise (graininess) to appear in images of relatively dark subjects.
Downloaded From camera-usermanual.com Casio Manuals
60
BASIC IMAGE RECORDING
• When recording a dimly lit subject while “Auto” is selected for the ISO sensitivity setting (page 142), the camera increases sensitivity and uses a faster shutter speed.
Because of this, you need to guard against camera movement if you have flash turned off (page 67).
• Bright light shining on the lens can cause images to appear “washed out”. This tends to happen when recording images outdoors in bright sunlight. To protect against this, use your free hand to shade the lens from the light.
■ About Auto Focus
• Proper focus may be difficult or even impossible when shooting the following types of subjects.
— Solid color walls or subjects with little contrast
— Strongly backlit subjects
— Very shiny objects
— Venetian blinds or other horizontally repeating patterns
— Multiple subjects that are varying distances from the camera
— Subjects in poorly lit areas
— Moving subjects
— Subjects outside the shooting range of the camera
• Proper focus may also be difficult or impossible if the camera is moving.
• Note that a green operation lamp and focus frame do not necessarily guarantee that the resulting image will be in focus.
• If Auto Focus does not produce the results you want for some reason, try using focus lock (page 87) or manual focus (page 85).
Downloaded From camera-usermanual.com Casio Manuals
61
BASIC IMAGE RECORDING
■ About the REC Mode Monitor Screen
• The image shown on the monitor screen in a REC mode is a simplified image for composing purposes. The actual image is recorded in accordance with the image quality setting currently selected on your camera. The image saved in file memory has much better resolution and detail than the REC modes monitor screen image.
• Certain levels of subject brightness can cause the response of the REC mode monitor screen to slow down, which causes some digital noise (graininess) in the monitor screen image.
• Very bright light inside of an image can cause a vertical band to appear in the monitor screen image. This is a
CCD phenomenon known as “vertical smear”, and does not indicate malfunction of the camera. Note that vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a movie (page
118).
Using the Optical Viewfinder
You can conserve battery power by turning off the camera’s monitor screen (page 33) and using the optical viewfinder to compose images. The optical viewfinder also comes in handy when shooting in areas where the monitor screen is difficult to view because available lighting is dim, etc.
IMPORTANT!
• The visible area framed by the viewfinder shows the image that would be recorded at a distance of about one meter (3.3˝). When recording a subject that is closer to you than one meter, the recorded image will be lower than what you can see inside the viewfinder area.
Optical viewfinder
Downloaded From camera-usermanual.com Casio Manuals
62
Area recorded at distances less than one meter (3.3˝)
Area visible in the viewfinder
BASIC IMAGE RECORDING
• Since the monitor screen shows exactly what will be recorded, always use it for composing images in the
Macro and Manual Focus modes.
Downloaded From camera-usermanual.com Casio Manuals
63
Using Zoom
Your camera is equipped with two types of zoom: optical zoom and digital zoom. Normally, the camera automatically switches over to digital zoom after you reach the maximum limit for optical zoom. You can, however, configure the camera to disable digital zoom, if you want.
Optical Zoom
The optical zoom range is 1X to 3X.
1.
In a REC mode, move the zoom controller left or right to zoom.
• Moving the zoom controller as far as it goes in either direction will zoom at high speed.
Zoom controller
To do this:
Zoom out for a wider view
(main subject becomes smaller)
Zoom in for a closer view (main subject becomes larger)
Move the zoom controller in this direction:
(Wide Angle)
(Telephoto)
BASIC IMAGE RECORDING
Zoom out Zoom in
2.
Compose the image, and then press the shutter button.
NOTE
• The optical zoom factor also affects the lens aperture.
• Use of a tripod is recommended to protect against hand movement when using the telephoto setting
(zoom in).
• Whenever you perform an optical zoom operation while recording with the Auto Focus mode, Macro mode or manual focus, a value will appear on the monitor screen to tell you the focusing range (pages
80, 83, 85).
• Optical zoom is disabled during movie recording.
Digital zoom only is available. Make sure you select the optical zoom setting you want to use before you press the shutter button to start movie recording
(page 120).
Downloaded From camera-usermanual.com Casio Manuals
64
BASIC IMAGE RECORDING
Digital Zoom
Digital zoom digitally enlarges the part of the image at the center of the image screen. The range of digital zoom is 3X to 24X (in combination with optical zoom).
IMPORTANT!
• When you perform a digital zoom operation, the camera manipulates the image data to enlarge the center of the image. Unlike optical zoom, an image enlarged with digital zoom appears coarser than the original.
• Digital zoom is not supported while date stamping
(“Date” or “Date&Time”) is turned on (page 147).
Downloaded From camera-usermanual.com Casio Manuals
65
■ To record an image using digital zoom
1.
In a REC mode, hold the zoom controller towards
(telephoto) side.
• This causes the zoom indicator to appear on the display.
Digital zoom indicator
Zoom indicator
2.
When the zoom pointer reaches the optical/ digital zoom switch over point, it will stop.
Optical Zoom range
Digital
Zoom range
1X 3X
Zoom pointer
Optical/digital zoom switch over point
24X
• The above shows what the zoom indicator looks like when digital zoom is turned on (page 66). The digital zoom range is not displayed when digital zoom is turned off.
BASIC IMAGE RECORDING
3.
Release the zoom controller momentarily, and then slide it towards (telephoto) side again to move the zoom pointer into the digital zoom range.
• The zoom pointer will also stop when you move the pointer back to the switch over point to re-enter the optical zoom range. Release the zoom controller and then slide it towards (wide angle) side again to move into the optical zoom range.
4.
Compose the image, and then press the shutter button.
■ To turn digital zoom on and off
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “REC” tab.
3.
Use [
왖] and [왔] to select “Digital Zoom”, and
then press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Turn on digital zoom
Turn off digital zoom
Select this setting:
On
Off
• Only the optical zoom range is displayed in the zoom indicator when digital zoom is turned off.
Downloaded From camera-usermanual.com Casio Manuals
66
BASIC IMAGE RECORDING
Using the Flash
Perform the following steps to select the flash mode you want to use.
• The approximate effective range of the flash is shown below.
Wide Angle Optical Zoom:
Approximately 0.1 to 4.3 meters
(0.33´ to 14.1´) (ISO Sensitivity: Auto)
Telephoto Optical Zoom:
Approximately 0.5 to 2.4 meters
(1.6´ to 7.9´) (ISO Sensitivity: Auto)
* Depends on zoom factor.
1.
In a REC mode, press [
왔] ( ).
2.
Use [
왖] and [왔] to select the flash mode, and
then press [SET] .
• This causes the flash mode indicator to appear on the display.
[
왔] (
)
Downloaded From camera-usermanual.com Casio Manuals
67
B
BASIC IMAGE RECORDING
To do this:
Have the flash fire automatically when required (Auto Flash)
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Always use high-intensity flash, regardless of exposure (High-power
Flash)
• You can increase sensitivity, which will brighten subjects that are further away, as required.
Always use soft flash, regardless of exposure conditions (Soft Flash)
Fire a pre-flash followed by image recording with flash, reducing the chance of red-eye in the image (Redeye reduction)
In this case, the flash fires automatically when required
Select this setting:
3.
Press the shutter button to record the image.
IMPORTANT!
• The flash unit of this camera fires a number of times when you record an image. The initial flashes are pre-flashes, which the camera uses to obtain information that it uses for exposure settings. The final flash is for recording. Make sure that you keep the camera still until the shutter releases.
• Using the flash while “Auto” is selected for the ISO
Sensitivity setting increases sensitivity, which can cause large amounts of digital noise to appear in the image. You can reduce digital noise by using a lower
ISO Sensitivity setting. Note, however, that this also has the effect of shortening the flash range (the range that is covered by the light from the flash)
(page 142).
Downloaded From camera-usermanual.com Casio Manuals
68
BASIC IMAGE RECORDING
■ Flash On
Select (Flash On) as the flash mode when backlighting causes your subject to appear dark, even though there is enough light to keep the flash from firing automatically.
This will cause the flash to fire and illuminate your subject whenever you press the shutter button (daylight synchro flash).
■ High-power Flash
Select (High-power Flash) as the flash mode when the subject is relatively far away from the camera.
IMPORTANT!
• Using High-power Flash can cause an increase in digital noise in images.
• High-power Flash disabled when any setting other than “Auto” is selected for the ISO sensitivity setting.
Make sure that the ISO setting is “Auto” (page 142) when you want to use High-power Flash.
■ Soft Flash
Select (Soft Flash) as the flash mode to suppress flash intensity and shoot with a soft feel.
■ About Red-eye Reduction
Using the flash to record at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. Red-eye reduction causes the camera’s AF assist light/REC light/self-timer lamp to light, which causes the irises in the eyes of any people in the image to close. This reduces the chance of red-eye in the image.
Downloaded From camera-usermanual.com Casio Manuals
69
C
BASIC IMAGE RECORDING
IMPORTANT!
• Note the following important points when using redeye reduction.
— Red-eye reduction does not work unless the people in the image are looking directly at the camera during the pre-flash. Before pressing the shutter button, call out to the subjects so they all look at the camera while the pre-flash operation is performed.
— Red-eye reduction may not work very well if the subjects are located far away from the camera.
Flash Unit Status
You can find out the current flash unit status by pressing the shutter button half way and checking the monitor screen and red operation lamp.
Red operation lamp*
The indicator is also shown on the monitor screen when the flash unit is ready to fire.
* Red operation lamp
When the red operation lamp is this:
Flashing
Lit
It means this:
Flash unit is charging
Flash unit is ready to fire
Downloaded From camera-usermanual.com Casio Manuals
70
BASIC IMAGE RECORDING
Changing the Flash Intensity Setting
Perform the following steps to change the flash intensity setting.
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “Quality” tab.
3.
Use [
왖] and [왔] to select “Flash Intensity”,
and then press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To make flash intensity:
Stronger
Normal
Weaker
Select this setting:
+2
+1
0
–1
–2
IMPORTANT!
• Flash intensity may not change if the subject is too far or too close to the camera.
Downloaded From camera-usermanual.com Casio Manuals
71
Using Flash Assist
Recording a subject that is outside the flash range can cause the subject to appear dark in the resulting image, because not enough of the flash reaches the subject. When this happens, you can use flash assist to correct the brightness of the recorded subject, so it appears as if the flash illumination was sufficient.
Flash assist used Flash assist not used
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “Quality” tab.
3.
Use [
왖] and [왔] to select “Flash Assist”, and
then press [
왘].
BASIC IMAGE RECORDING
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Turn on flash assist
Turn off flash assist
Select this setting:
Auto
Off
IMPORTANT!
• Flash assist may not produce the desired result for some types of subjects.
• Flash assist may have little effect on your image if you changed any of the following settings when you recorded it.
— Flash intensity (page 71)
— Exposure compensation (EV shift) (page 88)
— ISO sensitivity (page 142)
— Contrast (page 146)
• Using flash assist can cause an increase of digital noise in recorded images.
■ Flash Precautions
• Take care that your fingers do not block the flash when you hold the camera.
Covering the flash with your finger can greatly reduce its effectiveness.
Flash
• You may not be able to achieve the desired results using the flash if the subject is too close or too far away.
• The flash takes anywhere from a few seconds to as long as 10 seconds to attain full charge after being fired. The actual time required depends on the battery level, temperature, and other conditions.
• The flash does not fire in the modes listed below. The
(Flash Off) icon on the monitor screen indicates that flash is turned off.
Movie mode, MOVIE BEST SHOT mode
• The flash unit may not be able to charge when camera battery power is low. If this happens, the flash will not fire properly and you will not be able to obtain the desired exposure. Be sure to charge the camera’s battery as soon as possible when power goes low.
Downloaded From camera-usermanual.com Casio Manuals
72
BASIC IMAGE RECORDING
• When the flash is turned off ( ), mount the camera on a tripod to record images in an area where available lighting is dim. Recording images under dim lighting without the flash can cause digital noise, which makes images appear coarse.
• When red-eye reduction ( ) is selected, flash intensity is adjusted automatically in accordance with the exposure. The flash may not fire at all when the subject is brightly lit.
• Using flash in combination with another light source
(daylight, fluorescent light, etc.) can result in abnormal image colors.
Using the Self-timer
The self-timer lets you select either a 2-second or 10second delay of the shutter release after you press the shutter button. A Triple Self-timer feature lets you perform three consecutive self-timer operations to record three images.
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “REC” tab.
3.
Use [
왖] and [왔] to select “Self-timer”, and
then press [
왘].
4.
Use [
왖] and [왔] to select the self-timer type
you want to use, and then press [SET].
• Selecting “Off” in step 4 disables the self-timer.
Downloaded From camera-usermanual.com Casio Manuals
73
BASIC IMAGE RECORDING
To do this:
Specify a 10-second self-timer
Specify a 2-second self-timer
Specify Triple Self-timer
Disable the self-timer
• This causes an indicator identifying the selected self-timer type to appear on the monitor screen.
• With the Triple Self-timer, the camera records a series of three images in the sequence described below.
Select this setting:
10 s
10 sec
2 s
2 sec
x 3
X3
Off
1. The camera performs a 10-second countdown and then records the first image.
2. The camera prepares to record the next image.
The amount of time required for preparation depends on the camera’s current “Size” and
“Quality” settings, the type of memory (built-in or card) you are using for image storage, and whether or not the flash is charging.
3. After preparation is complete, the indicator “1sec” appears on the monitor screen, and another image is recorded one second later.
4. Steps 2 and 3 are repeated once more to record the third image.
Downloaded From camera-usermanual.com Casio Manuals
74
BASIC IMAGE RECORDING
5.
Press the shutter button to record the image.
AF assist light/
REC light/self-timer lamp
• When you press the shutter button, the AF assist light/REC light/ self-timer lamp flashes and the shutter releases after the self-timer reaches the end of its countdown (about 10 seconds or two seconds).
• You can interrupt an ongoing self-timer countdown by pressing the shutter button while the AF assist light/REC light/self-timer lamp is flashing.
NOTE
• The “2 sec” self-timer setting is best when shooting with a slow shutter speed, because it helps to avoid blurring of images due to hand movement.
• The following functions are not available for use in combination with the self-timer.
Normal-speed continuous shutter mode, Short
Movie, Past Movie, Voice Recording
• The following functions are not available for use in combination with the Triple Self-timer.
BEST SHOT recording (“Business Cards and
Documents”, “Whiteboard, etc.”, “Old Photo”, “ID
Photo”), High-speed continuous shutter mode, Flash continuous shutter mode, Movie mode, MOVIE BEST
SHOT mode
Downloaded From camera-usermanual.com Casio Manuals
75
BASIC IMAGE RECORDING
Specifying Image Size
“Image size” is the size of the image, expressed as the number of vertical and horizontal pixels. A “pixel” is one of the many tiny dots that make up the image. More pixels provide finer detail when an image is printed, but a higher pixel count also causes the image’s file size to be larger.
You can select an image size to suit your needs for greater detail or smaller file size.
• Note that this setting is valid for snapshots only. For information about movie image size, see page 119.
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “Quality” tab.
3.
Use [
왖] and [왔] to select “Size”, and then
press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
• When selecting the image size, the image size value
(pixels) will alternate on the display with a corresponding print size. The print size indicates the optimum paper size when you print an image that is the image size you select.
Image Size
8M*
8M
(3:2)
3264
× 2448
3264
× 2176
(3:2)
6M
4M
2M
VGA
2816
× 2112
2304
× 1728
1600
× 1200
640
× 480
* “M” stands for “Mega.”
Print Size
A3 Print
A3 Print (3:2 horizontal-tovertical ratio)
A3 Print
A4 Print
3.5˝
× 5˝ Print
E-mail (optimum size when attaching image to e-mail)
Larger
Smaller
Downloaded From camera-usermanual.com Casio Manuals
76
BASIC IMAGE RECORDING
• The above print sizes are all approximate values when printing at a resolution of 200 dpi (dots per inch). Use a larger setting when you want to print at a higher resolution or when you plan to produce a larger size print.
• In order to obtain the level of resolution for which your camera is designed, recording at a maximum image size
(8M) is recommended. Use a smaller image size when you want to conserve memory capacity.
• Selecting the “3264
× 2176 (3:2)” image size records images with a 3:2 (horizontal:vertical) aspect ratio, which is optimal for printing on photographic paper with an aspect ratio of 3:2.
Specifying Image Quality
Compressing an image before storage can cause a deterioration of its quality. The more an image is compressed, the greater the loss of quality. The image quality setting specifies the compression ratio to be used when an image is stored in memory. You can select an image quality setting to suit your needs for higher quality or smaller file size.
• Note that this setting is valid for snapshots only. For information about movie image quality, see page 119.
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “Quality” tab.
3.
Use [
왖] and [왔] to select “
Quality”, and then press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals
77
BASIC IMAGE RECORDING
To get this:
High image quality, large file size
Normal image quality and normal file size
Low image quality, small file size
Select this setting:
Fine
Higher
Quality
Normal
Economy
Lower
Quality
IMPORTANT!
• Actual file size depends on the type of image you record. This means that the remaining image capacity noted on the monitor screen may not be exactly accurate (pages 29, 273).
Downloaded From camera-usermanual.com Casio Manuals
78
OTHER RECORDING FUNCTIONS
OTHER RECORDING FUNCTIONS
Selecting the Focus Mode
You can select one of five different focus modes: Auto
Focus, Macro, Pan Focus, Infinity, and Manual Focus.
[
왖] ( )
1.
In a REC mode, press [
왖]
( ).
• Each press of [
왖] ( ) cycles thorough the focus mode settings in the sequence shown below.
To set up the camera to do this:
Focus automatically (Auto Focus)
Perform close-up focus (Macro)
Fix the focal distance (Pan Focus)*
Perform infinity focus (Infinity)
Focus manually (Manual Focus)
Select this setting:
* Pan Focus can be selected in a movie mode (Movie,
MOVIE BEST SHOT) only.
Focus mode indicator
Downloaded From camera-usermanual.com Casio Manuals
79
OTHER RECORDING FUNCTIONS
Using Auto Focus
As its name suggests, Auto Focus focuses the image automatically. The automatic focus operation starts when you press the shutter button down half way. The following is the Auto Focus range.
Range: 40cm to
∞ (1.3´ to ∞)
• Using optical zoom causes the above ranges to change.
1.
Press [
왖] ( ) to cycle through the focus
mode settings until “ ” is shown as the focus mode indicator.
2.
Compose the image so the main subject is within the focus frame, and then press the shutter button half way.
• You can tell whether the image is focused by observing the focus frame and the green operation lamp.
Green operation lamp
Focus frame
When you see this:
Green focus frame
Green operation lamp
Red focus frame
Flashing green operation lamp
It means this:
The image is focused.
The image is not focused.
3.
Press the shutter button the rest of the way to record the image.
Downloaded From camera-usermanual.com Casio Manuals
80
OTHER RECORDING FUNCTIONS
NOTE
• When proper focusing is not possible because the subject is closer than the Auto Focus range, the camera automatically switches to the Macro mode range (page 83).
• Whenever you perform an optical zoom operation
(page 63) while recording with Auto Focus, a value will appear on the monitor screen as shown below to tell you the focusing range.
Example: AF
앪앪 cm - ∞
*
앪앪 will be replaced by the actual focusing range value.
■ Quick Shutter
When Quick Shutter is turned on, the camera immediately records the image without waiting for Auto Focus to be performed when you press the shutter release all the way down. This helps to avoid missing a special moment while you wait for the camera to Auto Focus.
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Quick Shutter”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Turn on Quick Shutter
Turn off Quick Shutter
Select this setting:
On
Off
Downloaded From camera-usermanual.com Casio Manuals
81
OTHER RECORDING FUNCTIONS
■ Specifying the Auto Focus Area
You can use the following procedure to change the Auto
Focus area used in the Auto Focus mode and the Macro mode. Note that the configuration of the focus frame changes in accordance with the Auto Focus area you select.
1.
In a REC mode, press [MENU].
2.
On the “REC” tab, select “AF Area”, and then press [
왘].
3.
Use [
왖] and [왔] to select the Auto Focus area
you want, and then press [SET].
For this type of Auto Focus area:
Very limited range in the center of the screen
• This setting works well with focus lock
(page 87).
Automatic selection of the focus area where the subject closest to the camera is located
• With this setting, a wide focus frame, which contains nine focus points, appears on the monitor screen first. When you press the shutter button half way, all of the focus frames that are in focus among the nine focus points become green.
• This setting works well for group photos.
Free movement of the focus point location you want.
• Selecting this setting initially displays the focus point in the center of the monitor screen. Then you can use the [
왖], [왔],
[
왗], and [왘] keys to move it to the location you want. Finally, press [SET] to select the current focus point location.
Select this:
Spot
Multi
Free
Downloaded From camera-usermanual.com Casio Manuals
82
OTHER RECORDING FUNCTIONS
• Spot • Multi
Focus frame
• Free
Focus point
[SET]
Focus frame
Focus frame
Downloaded From camera-usermanual.com Casio Manuals
83
Using the Macro Mode
Use the Macro mode when you need to focus on close up subjects. The following shows the approximate focus range in the Macro mode.
Range: 10cm to 50cm (3.9˝ to 19.7˝)
• Using optical zoom causes the above range to change.
1.
Press [
왖] ( ) to cycle through the focus
mode settings until “ ” is shown as the focus mode indicator.
2.
Press the shutter button to record the image.
• The focus and image recording operations are identical to those in the Auto Focus mode.
NOTE
• When the Macro mode cannot focus properly because the subject is too far away, the camera automatically switches to the Auto Focus range
(page 80).
• Whenever you perform an optical zoom operation
(page 63) while recording with the Macro mode, a value will appear on the monitor screen as shown below to tell you the focusing range.
Example:
앪앪m - 앪앪m
*
앪앪 will be replaced by the actual focusing range value.
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Use of the flash along with the Macro mode can cause the light of the flash to become blocked, which can produce unwanted shadows in your image.
Using Pan Focus
Pan Focus can be used in a movie mode (Movie, MOVIE
BEST SHOT) to focus on a particular subject and record without using Auto Focus. Pan Focus comes in handy when recording under conditions where Auto Focus is difficult for some reason, or in cases where Auto Focus operation noise is too noticeable in the movie audio.
1.
In a REC mode, enter a movie mode (pages
120, 123).
• You can perform this procedure in the Movie or
MOVIE BEST SHOT mode.
2.
Press [
왖] ( ) to scroll through settings
until “ ” is displayed.
3.
Press the shutter button to record the movie with Pan Focus.
Downloaded From camera-usermanual.com Casio Manuals
84
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Pan Focus can be used in a movie mode (Movie,
MOVIE BEST SHOT) only. It is disabled in all other modes.
• Whenever you perform an optical zoom operation
(page 63) prior to movie recording, a value range will appear on the monitor screen as shown below to tell you the focusing range.
Example: PF
앪앪 cm -
∞
*
앪앪 will be replaced by the actual focusing range value.
Using the Infinity Mode
The Infinity mode fixes focus at infinity (
∞). Use this mode when recording scenery and other faraway images.
1.
Press [
왖] ( ) to cycle through the focus
mode settings until “ ” is shown as the focus mode indicator.
2.
Press the shutter button to record the image.
Using Manual Focus
With the Manual Focus mode, you can adjust the focus of an image manually. The following shows focus range in the
Manual Focus mode.
Optical Zoom Factor
1X
3X
Approximate Focus Range
10cm (3.9˝) to infinity (
∞)
50cm (19.7˝) to infinity (
∞)
• Using optical zoom causes the above range to change.
1.
Press [
왖] ( ) to
cycle through the focus mode settings until “ ” is shown as the focus mode indicator.
• At this point, a boundary also appears on the display, indicating the part of the image that will be used for manual focus.
Boundary
Downloaded From camera-usermanual.com Casio Manuals
85
C
OTHER RECORDING FUNCTIONS
2.
While watching the image on the monitor screen, use [
왗] and
[
왘] to focus.
Manual focus position
To do this:
Focus in on the subject
Focus out on the subject
Do this:
Press [
왗].
Press [
왘].
• Pressing [
왗] or [왘] causes the area inside of the boundary displayed in step 1 to fill the monitor screen momentarily to aid in focus. The normal image will reappear a short while later.
3.
Press the shutter button to record the image.
IMPORTANT!
• In the Manual Focus mode, the [
왗] and [왘] keys adjust focus, even if you used key customization to assign other functions to them (page 137).
Downloaded From camera-usermanual.com Casio Manuals
86
NOTE
• Whenever you perform an optical zoom operation
(page 63) while recording with manual focus, a value will appear on the monitor screen as shown below to tell you the focusing range.
Example: MF
앪앪m - ∞
*
앪앪 will be replaced by the actual focusing range value.
OTHER RECORDING FUNCTIONS
Using Focus Lock
Focus lock is a technique you can use to focus on a subject that is not located within the focus frame when you record an image. You can use focus lock in the Auto Focus mode and the Macro mode ( ).
1.
Using the monitor screen, compose the image so the main subject is within the focus frame, and then press the shutter button half way.
• This locks the focus on the subject that is currently within the focus frame.
Main subject
Focus frame
2.
Keeping the shutter button pressed half way down, recompose the image as you like.
Main subject
3.
When the image is composed the way you want, press the shutter button the rest of the way to record it.
• The focus and image recording operations are identical to those in the Auto Focus mode.
NOTE
• Locking the focus also locks the exposure.
Downloaded From camera-usermanual.com Casio Manuals
87
OTHER RECORDING FUNCTIONS
Exposure Compensation (EV Shift)
Exposure compensation lets you change the exposure setting (EV value) manually to adjust for the lighting of your subject. This feature helps to achieve better results when recording a backlit subject, a strongly lit subject indoors, or a subject that is against a dark background.
EV Shift Range: –2.0EV to +2.0EV
Steps: 1/3EV
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “EV Shift”, and then press [
왘].
3.
Use [
왖] and [왔] to change the exposure
compensation value, and then press [SET].
• Pressing [SET] registers the displayed value.
[
왖] : Increases the EV value. A higher EV value is best used for light-colored subjects and backlight subjects.
[
왔] : Decreases the EV value. A lower EV value is best for dark-color subjects and for shooting outdoors on a clear day.
Exposure compensation value
Downloaded From camera-usermanual.com Casio Manuals
88
• To cancel EV Shift, adjust the value until it becomes
0.0.
4.
Press the shutter button to record the image.
OTHER RECORDING FUNCTIONS
IMPORTANT!
• When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure compensation.
NOTE
• Performing an EV shift operation while using multipattern metering (page 143) will cause the metering mode to switch automatically to center weighted metering. Returning the EV shift value to 0.0 causes the metering mode to change back to multi-pattern metering.
• You can use key customization (page 137) to configure the camera to perform exposure compensation whenever you press [
왗] or [왘] while in a REC mode. This comes in handy when adjusting exposure compensation while viewing the on-screen histogram (page 134).
Adjusting White Balance
The wavelengths of the light produced by various light sources (daylight, light bulb, etc.) can affect the color of a subject when it is recorded. White balance lets you make adjustments to compensate for different lighting types, so the colors of an image appear more natural.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “White
Balance”, and then press [
왘].
Downloaded From camera-usermanual.com Casio Manuals
89
OTHER RECORDING FUNCTIONS
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
When shooting under these conditions:
Normal conditions
Outdoor daylight on a clear day
Outdoor daylight on an overcast or rainy day, in the shade of a tree, etc.
In the shade of a building or any other area where the color temperature is high
Under white or daylight white fluorescent light
(suppresses color fogging)
Under daylight fluorescent light
(suppresses color fogging)
Under incandescent lighting
Difficult lighting that requires manual control (See “Configuring the White
Balance Setting Manually” (page 91).)
Select this setting:
Auto
N
D
Manual
NOTE
• When “Auto” is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible.
When this happens, use daylight, cloudy, or one of the other fixed white balance settings to specify the type of lighting available.
• You can use the key customization feature (page
137) to configure the camera so the white balance setting changes whenever you press [
왗] or [왘] while in a REC mode.
• If you have key customization configured to control white balance and you have Icon Help turned on
(page 139), select “
AWB
Auto WB” to change the white balance mode to auto.
Downloaded From camera-usermanual.com Casio Manuals
90
OTHER RECORDING FUNCTIONS
Configuring the White Balance Setting
Manually
Certain complex light sources or other environmental conditions can make it impossible to obtain good results when “Auto” or one of the fixed light source settings is selected for white balance. Manual white balance lets you configure the camera for a particular light source and other conditions.
Note that you must perform manual white balance under the same conditions you will be shooting under. Have a sheet of white paper on hand before starting the following procedure.
1.
In a REC mode, press [MENU].
2.
Select a “Quality” tab, select “White
Balance”, and then press [
왘].
3.
Use [
왖] and [왔] to
select “Manual”.
• This causes the object you last used to adjust manual white balance to appear on the monitor screen. If you want to use the same settings you configured during a previous manual white balance setting operation, skip step 4 and perform step 5.
4.
Point the camera at a white paper or similar object under the lighting conditions for which you want to set the white balance, and then press the shutter button.
White paper
Downloaded From camera-usermanual.com Casio Manuals
91
OTHER RECORDING FUNCTIONS
• This starts the white balance adjustment procedure.
The message “Complete” appears on the monitor screen after white balance adjustment is complete.
5.
Press [SET].
• This registers the white balance settings and returns to the currently selected recording mode.
NOTE
• After you adjust white balance manually, the setting remains in effect until you change it or until you turn off the camera.
Specifying the Exposure Mode
You can use the mode dial to select the exposure mode, which controls the aperture and shutter speed settings used during image recording.
A mode : Aperture Priority AE
S mode : Shutter Speed Priority AE
M mode : Manual Exposure
Using Aperture Priority AE
When A mode (aperture priority AE) is selected as the exposure mode, the camera adjusts the shutter speed automatically in accordance with a fixed aperture value specified by you. A wider aperture (a lower aperture value) provides a shallow depth of field, while a small aperture (a higher aperture value) provides a greater depth of field.
The shutter speed range in this mode is 1/1600 to 1 second.
Downloaded From camera-usermanual.com Casio Manuals
92
OTHER RECORDING FUNCTIONS
Wide Aperture Small Aperture
1.
In a REC mode, align the mode dial with “A”
(Aperture Priority).
Aperture value EV shift
2.
Press [SET] to select the aperture value in the exposure panel, and then use [
왗] and [왘] to
change the setting.
Aperture value*
Depth of Field
Wide Small
F2.8 ‚ F4.0
Shallow Deep
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom settings.
• You could also press [SET] to select “EV Shift” here, and then use [
왗] and [왘] to specify an exposure compensation value (pages 31, 88).
• If you are using manual focus (pages 31, 85), you can also press [SET] to select “FOCUS” (manual focus adjustment), and then use [
왗] and [왘] to focus manually.
Downloaded From camera-usermanual.com Casio Manuals
93
OTHER RECORDING FUNCTIONS
3.
Press the shutter button half way.
• This causes the camera to configure shutter speed automatically in accordance with the aperture value you selected. Then it focuses the image.
• The shutter speed and aperture values on the monitor screen will turn amber when you press the shutter button half way if the image is over-exposed or under-exposed.
4.
When the image is focused, press the shutter button all the way down to record.
Using Shutter Speed Priority AE
When S mode (shutter speed priority AE) is selected as the exposure mode, the camera adjusts the aperture automatically in accordance with a fixed shutter speed specified by you. You should specify a shutter speed in accordance with how much your subject is moving.
Slow Fast
Downloaded From camera-usermanual.com Casio Manuals
94
OTHER RECORDING FUNCTIONS
1.
In a REC mode, align the mode dial with “S”
(Shutter Speed
Priority).
Shutter speed EV shift
2.
Press [SET] to select the shutter speed value in the exposure panel, and then use [
왗] and
[
왘] to change the setting.
Shutter speed
Movement
Slow
60 seconds
Blurred
Fast
1/1600 second
Stopped
• You could also press [SET] to select “EV Shift” here, and then use [
왗] and [왘] to specify an exposure compensation value (pages 31, 88).
• If you are using manual focus (pages 31, 85), you can also press [SET] to select “FOCUS” (manual focus adjustment), and then use [
왗] and [왘] to focus manually.
Downloaded From camera-usermanual.com Casio Manuals
95
3.
Press the shutter button half way.
• This causes the camera to configure the aperture value automatically in accordance with the shutter speed you selected. Then it focuses the image.
• The shutter speed and aperture values on the monitor screen will turn amber when you press the shutter button half way if the image is over-exposed or under-exposed.
4.
When the image is focused, press the shutter button all the way down to record.
OTHER RECORDING FUNCTIONS
Setting Exposure Settings Manually
In the M mode (manual exposure), you can adjust shutter speed and aperture manually.
1.
In a REC mode, align the mode dial with “M”
(Manual).
ISO sensitivity Aperture value
Shutter speed
2.
Press [SET] to select the aperture value in the exposure panel, and then use [
왗] and [왘] to
change the setting.
Aperture value*
Depth of Field
Wide Small
F2.8‚ F4.0
Shallow Deep
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom settings.
Downloaded From camera-usermanual.com Casio Manuals
96
3.
Press [SET] to select the shutter speed value in the exposure panel, and then use [
왗] and
[
왘] to change the setting.
Shutter speed
Movement
Slow
60 seconds
Blurred
Fast
1/1600 second
Stopped
• If you are using manual focus (pages 31, 85), you can also press [SET] to select “FOCUS” (manual focus adjustment), and then use [
왗] and [왘] to focus manually.
4.
Press the shutter button half way.
• This causes the camera to adjust focus automatically.
5.
When the image is focused, press the shutter button all the way down to record.
OTHER RECORDING FUNCTIONS
Exposure Mode Recording Precautions
• You may not be able to achieve the brightness you want when recording an image that is very dark or very bright.
If this happens, use the M mode (manual exposure) to adjust the aperture or shutter speed manually.
• Using slow shutter speeds can cause digital noise
(graininess) to appear in the image. Because of this, the camera automatically performs a digital noise reduction process whenever the shutter speed is 1/8 second or slower. The slower the shutter speed, the greater the possibility that digital noise will be generated in an image.
Also note that the digital noise reduction process can cause it to take longer to record each image.
• At shutter speeds slower than 1/8 second, the brightness of the recorded image may not be the same as the brightness of the image that appears on the monitor screen.
Using Continuous Shutter
In addition to normal recording that records a single image each time the shutter button is pressed, you can select one of the five continuous shutter modes to record multiple images.
• Normal-speed continuous shutter mode
You can continually record images until memory becomes full.
• High-speed continuous shutter mode
Record up to three consecutive images at high speed.
• Flash continuous shutter mode
Use this mode to record up to three consecutive images, firing the flash for each one.
• Zoom continuous shutter mode
In this mode, you can select an area on the monitor screen with a selection boundary. Then when you press the shutter button, the camera records the monitor screen image and the area enclosed in the selection boundary, digitally zoomed to twice its normal size.
• Multi continuous shutter mode
This mode records 25 consecutive stop-action shots at high speed and combines them into a single image.
Downloaded From camera-usermanual.com Casio Manuals
97
OTHER RECORDING FUNCTIONS
Using the Normal-Speed Continuous
Shutter Mode
Holding down the shutter button continuously records images, as long as there is memory available to store them.
1.
In a REC mode, press
[ ].
IMPORTANT!
• The speed of continuous shutter recording depends on the type of memory card loaded in the camera.
When recording to built-in memory, continuous shutter recording is relatively slow.
NOTE
• You can also select a continuous shutter mode by holding down [ ], selecting the mode you want with [
왖] and [왔], and then releasing [
].
2.
Use [
왖] and [왔] to select “ Normal Speed
Cont.”, and then press [SET].
• This causes “ ” to appear on the monitor screen.
3.
Press the shutter button to record.
• Recording continues as long as you keep the shutter button depressed. Release the shutter button to stop recording.
Downloaded From camera-usermanual.com Casio Manuals
98
OTHER RECORDING FUNCTIONS
Using the High-Speed Continuous
Shutter Mode
Holding down the shutter button while high-speed continuous shutter is selected records up to three images at high speed.
1.
In a REC mode, press [ ].
2.
Use [
왖] and [왔] to select “
High Speed
Cont.”, and then press [SET].
• This causes “ ” to appear on the monitor screen.
3.
Press the shutter button to record.
• Recording continues as long as you keep the shutter button depressed. Shooting stops if you release the shutter button before three images are recorded.
Using the Flash Continuous Shutter
Mode
Holding down the shutter button while flash continuous shutter is selected records up to three images, firing the flash for each one.
1.
In a REC mode, press [ ].
2.
Use [
왖] and [왔] to select “
Flash Cont.”, and then press [SET].
• This causes “ ” to appear on the monitor screen.
3.
Press the shutter button to record.
• Recording continues as long as you keep the shutter button depressed. Shooting stops if you release the shutter button before three images are recorded.
Downloaded From camera-usermanual.com Casio Manuals
99
OTHER RECORDING FUNCTIONS
Using the Zoom Continuous Shutter
Mode
The zoom continuous shutter mode displays a selection boundary that you can use to select an area in the monitor screen. Then when you press the shutter button, the camera records the monitor screen image and the area enclosed in the selection boundary, digitally zoomed to twice its normal size.
1.
In a REC mode, press [ ].
2.
Use [
왖] and [왔] to select “
Z
Zoom
Continuous”, and then press [SET].
• This displays a selection boundary in the center of the monitor screen.
3.
Use [
왖], [왔], [왗], and [왘] to move the
selection boundary to the area of the monitor screen you want, and then press [SET].
• This causes “
Z
” to appear on the monitor screen.
4.
Press the shutter button once to record.
• This records two images: the image on the monitor screen and the image within the selection boundary, digitally zoomed to twice its normal size.
Downloaded From camera-usermanual.com Casio Manuals
100
IMPORTANT!
• Note with the above procedure, you do not need to keep the shutter button depressed.
• Note that zoom continuous shutter operation is not available when the image size setting is 3264
× 2176
(3:2) or 640
× 480.
• The size of the digitally processed images is smaller than the camera’s current image size setting.
Example: When the camera’s current image size setting is 3264
× 2448 pixels, the size of the digitally processed images produced by a zoom continuous shutter operation will be 1600
× 1200 pixels.
• When Auto Focus is selected as the focus mode, the
Auto Focus area is located automatically in the center of the Zoom Continuous Shutter selection boundary (Spot Auto Focus area, pages 79, 82).
OTHER RECORDING FUNCTIONS
25-shot Stop Action Images (Using the
Multi Continuous Shutter Mode)
Use the following procedure to record 25 consecutive stopaction shots at high speed and combine them into a single image.
1.
In a REC mode, press [ ].
2.
Use [
왖] and [왔] to select “ Multi
Continuous”, and then press [SET].
• This causes “ ” to appear on the monitor screen.
3.
Press the shutter button once to record.
• After 25 shots are recorded, they are combined into a single image, which is stored in memory.
IMPORTANT!
• Note with the above procedure, you do not need to keep the shutter button depressed.
• The size of the 25-shot images is 1600
× 1200 pixels.
Downloaded From camera-usermanual.com Casio Manuals
101
OTHER RECORDING FUNCTIONS
Continuous Shutter Precautions
• Starting a continuous shutter operation causes the exposure and focus settings to be fixed at the levels for the first image. The same settings are applied to all subsequent images.
• Continuous shutter cannot be used in combination with any of the following features.
BEST SHOT (“Business Cards and Documents”,
“Whiteboard, etc.”, “Old Photo”, “ID Photo”, “Pastel”,
“Illustration”, “Cross”), Movie mode, MOVIE BEST SHOT mode
• When using a continuous shutter mode, keep the camera still until all recording is finished.
• A continuous shutter operation may stop part way through if memory capacity runs low.
• Using a slow shutter speed setting causes a longer interval between images.
• The continuous shutter rate depends on the current image size and image quality settings.
• You can select the flash mode you want with normalspeed continuous shutter mode.
• With the normal-speed continuous shutter mode and multi continuous shutter mode, the flash mode automatically becomes (flash off).
• With the flash continuous shutter mode, the flash mode automatically becomes (flash on).
Downloaded From camera-usermanual.com Casio Manuals
102
• You cannot use the self-timer in combination with the normal-speed continuous shutter mode (page 73).
• Triple Self-timer (page 74) can be used in combination with the zoom continuous shutter mode only.
• The slowest possible shutter speed setting when using the multi continuous shutter mode is 1/15 second.
• Note that the resolution of images recorded with the highspeed continuous shutter mode or flash continuous shutter mode is somewhat lower resolution and more prone to digital noise than images recorded with the normal-speed continuous shutter mode.
• “Auto” ISO sensitivity always is used for the high-speed continuous shutter mode or flash continuous shutter mode, regardless of the current ISO sensitivity setting.
• With the flash continuous shutter mode, the flash range is narrower than normal.
OTHER RECORDING FUNCTIONS
Using the BEST SHOT Mode
Simply select one of a collection of built-in sample scenes and the camera sets up for the scene you selected for beautiful snapshots every time.
■ Example Sample Scene
• Portrait • Scenery
1
. In a REC mode, align the mode dial with
“ ”, and then press
[SET].
• This enters the BEST
SHOT mode and displays all 12 of the
BEST SHOT scenes.
• Sample scenes are arranged in sequence, starting from the upper left corner.
• The currently selected sample scene is the one with the selection boundary around it.
• Night Scene • Night Scene Portrait
Downloaded From camera-usermanual.com Casio Manuals
103
OTHER RECORDING FUNCTIONS
2.
Use [
왖], [왔], [왗], and [왘] to select the sample
scene you want, and then press [SET].
• Use [
왖], [왔], [왗], and [왘] to move the selection boundary around the display. Scrolling left while the selection boundary is in the upper left or scrolling right while it is in the lower right corner will scroll to another screen of 12-sample scenes.
3.
Press the shutter button to record the image.
IMPORTANT!
• BEST SHOT scenes were not recorded using this camera. They are provided as samples only.
• Due to shooting conditions and other factors, an image recorded using the setup of a BEST SHOT scene may not produce exactly the results you expect.
• You can change the camera settings that are configured when you select a BEST SHOT scene.
The settings you can change are the same as those that are saved when you save a BEST SHOT user setup (page 106). Note, however, that some BEST
SHOT scenes do not allow you to change certain settings. BEST SHOT scene settings revert to their default presets whenever you select another BEST
SHOT scene or turn off the camera. If you want to save your settings for later use, save them as a
BEST SHOT user setup (page 106).
• Digital noise reduction processing is performed automatically when you are recording a night scene, fireworks, or other image that requires slow shutter speeds. Because of this, it takes longer to record images at lower shutter speeds. Make sure that you do not perform any camera button operations until the image recording operation is complete.
Downloaded From camera-usermanual.com Casio Manuals
104
OTHER RECORDING FUNCTIONS
• When recording the image of a night scene, fireworks, or some other image using a slow shutter speed, use of a tripod is recommended to prevent hand movement.
NOTE
• Operation guidance and the currently selected BEST
SHOT scene appear on the display for about two seconds if the camera is in the BEST SHOT mode when you turn it on.
Displaying Sample Scenes Individually
You can use the following procedure to display BEST
SHOT sample scenes individually, so you can view the explanation about each scene’s settings.
1
. In a REC mode, align the mode dial with “ ”, and then press [SET].
• This displays all 12 of the BEST SHOT scenes.
2
. Move the zoom controller.
• This displays the sample scene that was selected on the 12scene screen.
• To return to the 12sample scene screen, move the zoom controller again.
Downloaded From camera-usermanual.com Casio Manuals
105
3
4
OTHER RECORDING FUNCTIONS
. Use [
왗] and [왘] to select the sample scene
you want, and then press [SET].
. Press the shutter button to record the image.
Downloaded From camera-usermanual.com Casio Manuals
106
Creating Your Own BEST SHOT Setup
You can use the procedure below to save the setup of an snapshot you recorded as a BEST SHOT scene. After that, you can recall the setup whenever you want to use it.
1
. In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Use [
왖], [왔], [왗], and [왘] to select “Register
User Scene”, and then press [SET].
3.
Use [
왗] and [왘] to
display the snapshots whose setup you want to register as a
BEST SHOT scene.
4.
Use [
왖] and [왔] to select “Save”, and then
press [SET].
• This registers the setup. Now you can use the procedure on page 103 to select your user setup for recording.
OTHER RECORDING FUNCTIONS
IMPORTANT!
• BEST SHOT user setups are located in the camera’s built-in memory following the built-in sample scenes.
• Selecting a user snapshot setup displays the indicator “U” in the upper right corner of the monitor screen, followed by a number (that indicates the setup number).
• Note that formatting built-in memory (page 202) deletes all BEST SHOT user setups.
NOTE
• The following are the settings that are included in a snapshot setup: focus mode, EV shift value, white balance mode, flash mode, ISO sensitivity, Metering,
Flash Intensity, Flash Assist, Filter, Sharpness,
Saturation, and Contrast.
• Note that snapshots recorded with this camera only can be used to create a BEST SHOT user setup.
• You can have up to 999 BEST SHOT user setups in the camera’s built-in memory at one time.
• You can check the current setup of a scene by displaying the various setting menus.
• BEST SHOT snapshot user setups are stored in camera built-in memory in the folder named
“SCENE”. File names are assigned automatically using the format “UZ850nnn.JPE”, where “nnn” is a value from 000 through 999.
Downloaded From camera-usermanual.com Casio Manuals
107
OTHER RECORDING FUNCTIONS
To delete a BEST SHOT user setup
1
. In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Move the zoom controller to switch from the
12-scene screen to the sample scene.
3.
Use [
왗] and [왘] to display the user setup you
want to delete.
4.
Press [
왔] ( ) to delete the user setup.
5.
Use [
왖] and [왔] to select “Delete”.
6.
Press [SET] to delete the file.
7.
Select another scene, and then press [SET].
• This returns to the recording state.
Reducing the Effects of Hand or Subject
Movement
You can reduce the effects of subject movement, and for hand movement that tends to occur when shooting a faraway subject using telephoto, a fast-moving subject, or under dim lighting conditions.
• You can also use Anti Shake to reduce the effects of hand movement only while recording a movie. The effects of subject movement are not limited (page 118).
1.
Perform one of the procedures below to enable Anti Shake.
Using the BEST SHOT mode
1. In a REC mode, align the mode dial with “ ”, and then press [SET].
2. Use [
왖], [왔], [왗], and [왘] to select the “Anti Shake” scene, and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals
108
OTHER RECORDING FUNCTIONS
Using the Menu Screen
1. In a REC mode, press [MENU].
•
2. Select the “REC” tab, select “Anti Shake”, and then press [
왘].
3. Use [
왖] and [왔] to select “Auto”, and then press
[SET].
(Anti Shake indicator) is displayed on the monitor screen while Anti Shake is turned on.
2.
Press the shutter button to record the image.
IMPORTANT!
• Anti Shake is disabled automatically when any setting other than “Auto” is selected for ISO sensitivity. If you want Anti Shake to be operational after turning it on, be sure to change the ISO sensitivity setting to “Auto” (page 142).
• Recording with Anti Shake can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution.
• The Anti Shake feature may not be able to eliminate the effects of hand or subject movement when shaking is severe.
• The Anti Shake feature may not work when using a very low shutter speed. If this happens, use a tripod to stabilize the camera.
• Though “ ” (Anti Shake) is displayed on the monitor screen while the flash setting is “Auto Flash”,
“Flash On”, or “Soft Flash”, Anti Shake is disabled.
• While recording with Anti Shake, the maximum digital zoom factor is 4X (page 65).
Downloaded From camera-usermanual.com Casio Manuals
109
OTHER RECORDING FUNCTIONS
Shooting with High Sensitivity
Higher sensitivity makes it possible to record brighter images, without using flash, even when there is not enough lighting available to obtain normal exposure.
1.
In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Use [
왖], [왔], [왗], and [왘] to select the “High
Sensitivity” scene, and then press [SET].
3.
Press the shutter button to record the image.
IMPORTANT!
• High Sensitivity is disabled automatically when any setting other than “Auto” is selected for ISO sensitivity. If you want High Sensitivity to be operational after turning it on, be sure to change the
ISO sensitivity setting to “Auto” (page 142).
• Recording with high sensitivity can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution.
• A desirable level of image brightness may not be possible under very dark conditions.
• When shooting with slow shutter speeds, use a tripod to protect against the effects of hand movement.
• High Sensitivity is disabled while the flash setting is
“Auto Flash”, “Flash On”, or “Soft Flash”.
• While recording with High Sensitivity, the maximum digital zoom factor is 4X (page 65).
Downloaded From camera-usermanual.com Casio Manuals
110
OTHER RECORDING FUNCTIONS
Recording Images of Business Cards and
Documents (Business Shot)
Recording a business card, document, whiteboard, or similarly shaped object from an angle can cause the subject to appear misshaped in the resulting image.
Business Shot automatically corrects the shape of rectangular objects to make them appear like the camera was positioned directly in front of them.
■ Setup Sample Images
• Business cards and documents
• White board, etc.
Before keystone correction
After keystone correction
Downloaded From camera-usermanual.com Casio Manuals
111
OTHER RECORDING FUNCTIONS
Before recording with Business Shot
• Before recording, compose the image so outline of the item you want to record fits entirely within the monitor screen.
• Make sure the object is against a background that allows its outline to stand out, and that it fills the monitor screen to the maximum extent possible.
NOTE
• When the camera is at an angle to a business card or document it is recording, the shape of the business card or document may appear distorted in the image. Auto keystone correction corrects for this distortion, which means that subjects appear normal even if you record at an angle.
Downloaded From camera-usermanual.com Casio Manuals
112
To use Business Shot
1.
In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Use [
왖], [왔], [왗] and [왘] to select the
Business Shot image you want, and then press [SET].
3.
Press the shutter button to record the image.
• This displays a screen that shows all of the objects in the image that qualify as candidates for keystone correction. An error message will appear (page 271) if the camera is unable to find any suitable keystone correction candidate in the image. After a short while, the original image will be stored in memory, as-is.
OTHER RECORDING FUNCTIONS
4.
Use [
왗] and [왘] to select the candidate you
want to correct.
5.
Use [
왖] and [왔] to
select “Correct”, and then press [SET].
• Selecting “Cancel” in place of “Correct” stores the original image as-is, without correcting it.
IMPORTANT!
• Digital zoom is disabled while recording with
Business Shot. However, you can use optical zoom.
• The camera will not be able to recognize the subject in the following cases.
— When part of the subject extends outside of the monitor screen
— When the subject is the same color as the background it is placed upon
• The maximum Business Shot image size is 1600
×
1200 pixels, even if the camera is configured for a larger image size. An image size setting smaller than
1600
× 1200 pixels records images at the specified size.
Downloaded From camera-usermanual.com Casio Manuals
113
Restoring an Old Photograph
You can use the procedure in this section to restore an old, faded photograph with the color provided by modern digital camera technology.
Before trying to restore an old photograph
• Make sure the entire photograph you are trying to restore is enclosed within the monitor screen.
• Make sure the object is against a background that allows its outline to stand out, and that it fills the monitor screen to the maximum extent possible.
• Make sure that light is not reflecting off the surface of the original photograph.
• If the old photograph is portrait orientation, be sure to compose the image with the camera in landscape
(horizontal) orientation.
OTHER RECORDING FUNCTIONS
NOTE
• When the camera is at an angle to the old photograph, one side of the recorded image may appear longer than the side opposite from it. This is called “keystoning,” which is caused by the difference in distance from the camera lens to each side of the photograph. The side of the photograph that is closer to the camera looks longer and the side further from the camera looks shorter. Auto keystone correction corrects for this distortion, which means that a photograph appears normal even if you record it at an angle.
To restore an old photograph
1.
In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Use [
왖], [왔], [왗], and [왘] to select “Old
Photo”, and then press [SET].
3.
Press the shutter button to record the image.
• This displays a photograph contour confirmation screen, and then saves the original recorded image.
An error message will appear (page 271), without displaying the photograph contour confirmation screen, if the camera is unable to find the contour of the photograph.
Downloaded From camera-usermanual.com Casio Manuals
114
OTHER RECORDING FUNCTIONS
4.
Use [
왗] and [왘] to select the contour
candidate you want to correct.
5.
Use [
왖] and [왔] to
select “Trim”, and then press [SET].
• This displays a cropping boundary on the monitor screen.
• If you do not want to crop the image, select
“Cancel” to store the image.
6.
Use the zoom controller to make the cropping boundary larger or smaller.
7.
Use [
왖], [왔], [왗], and [왘] to move the
cropping boundary to the location you want, and then press [SET].
• The camera will restore color automatically and save the image.
• If you do not want a border around the image, configure the cropping boundary so it is slightly inside of the boundary of the displayed image.
• To cancel the cropping operation at any point and save the image as-is, press [MENU].
Downloaded From camera-usermanual.com Casio Manuals
115
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Digital zoom is disabled while recording an old photograph. However, you can use optical zoom.
• The camera will not be able to recognize an old photograph in the following cases.
— When part of the photograph extends outside of the monitor screen
— When the old photograph is the same color as the background it is placed upon
• The maximum size when recording an old photograph is 1600
× 1200 pixels, even if the camera is configured for a larger image size. When the camera is configured to record images smaller than
1600
× 1200 pixels, images will be in accordance with the currently specified image size.
• Under certain conditions, restored colors may not produce the desired results.
Recording an ID Photo
You can use this procedure to record a portrait and then print a variety of different standard size ID photos.
• Printing an ID photo produces a single sheet containing five ID photos of the following sizes.
30
× 24 mm (1.2˝ × 0.94˝), 40 × 30 mm (1.6˝ × 1.2˝),
45
× 35 mm (1.8˝ × 1.4˝), 50 × 40 mm (2.0˝ × 1.6˝),
55
× 45 mm (2.2˝ × 1.8˝)
1.
In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Use [
왖], [왔], [왗], and [왘] to select the “ID
Photo” scene, and then press [SET].
3.
On the monitor screen, compose the image by positioning the subject within the on-screen frame, and then press the shutter button to record an initial temporary image.
Downloaded From camera-usermanual.com Casio Manuals
116
OTHER RECORDING FUNCTIONS
• The initial temporary image is not stored in camera memory. The final image is stored in camera memory when you perform step 5.
4.
Adjust the position of the subject as described below.
To do this:
Shift the subject up or down
Shift the subject left or right
Zoom in on the subject
(to make it larger)
Zoom out on the subject
(to make it smaller)
Select this setting:
Press [
왖] or [왔].
Press [
왗] or [왘].
Move the zoom controller towards “ ”.
Move the zoom controller towards “ ”.
Head line
Chin line
• Adjust the image so the head of the subject is aligned with the head line at the top of the frame, and the chin of the subject is aligned with the chin line.
Downloaded From camera-usermanual.com Casio Manuals
117
5.
After positioning the subject in the frame, press [SET].
• Only the final image that is on the screen when you press [SET] in step 5 is stored in camera memory.
IMPORTANT!
• The image size of an ID photo is always 3264
× 2448 pixels, regardless of the camera’s current image size setting.
OTHER RECORDING FUNCTIONS
Printing an ID Photo
Printing an ID photo will print five versions of the same image in the sizes shown below on a single sheet of paper.
Then you can cut out the image(s) you want to use.
30
× 24 mm (1.2˝ × 0.94˝), 40 × 30 mm (1.6˝ × 1.2˝),
45
× 35 mm (1.8˝ × 1.4˝), 50 × 40 mm (2.0˝ × 1.6˝),
55
× 45 mm (2.2˝ × 1.8˝)
IMPORTANT!
• The above sizes are not exact. Actual image sizes may differ slightly from those noted above.
• When printing an ID photo, be sure to print on 4˝
× 6˝ size paper (page 216). Images may not print at the proper sizes if another size of paper is used.
Downloaded From camera-usermanual.com Casio Manuals
118
Recording a Movie
You can record high-resolution movies with audio. Movie length is limited only by the amount of memory available for storage. You can select a resolution setting to suit your needs, and a variety of different movie recording functions provide plenty of movie making versatility.
• File Format: MPEG-4 AVI format
• Maximum Movie Length :
The length of a movie is limited only by the amount of memory available to store it.
• Approximate Movie File Size (1-minute movie) :
28.4MB (Quality Setting: HQ)
14.9MB (Quality Setting: Normal)
5.3MB (Quality Setting: LP)
• Movie recording functions
— Movie mode
Use this mode for normal movie recording (page 120).
— MOVIE BEST SHOT mode
This mode makes camera setup as easy as selecting the applicable sample scene. Select one of the MOVIE
BEST SHOT scenes and the camera automatically configures itself with the setup for that scene (page
123).
OTHER RECORDING FUNCTIONS
— Short Movie
Each press of the shutter button records a short movie that starts before the button is pressed and ends after the button is pressed (page 126).
— Past Movie
This function uses a 5-second buffer that is continually updated. Pressing the shutter button starts recording from five seconds prior to the point the button is pressed. Use this function when you want to make sure you do not miss fast-moving action (page 129).
NOTE
• Use MOVIE BEST SHOT to select “Short Movie” to use short movie or “Past Movie” to use past movie.
• You can play movie files on your computer using
Windows Media Player 9.
• Installing CASIO AVI Importer component on your
Macintosh makes it possible to use QuickTime to playback movies recorded with the camera (page
256).
Specifying Movie Image Quality
The image quality setting determines how much the camera compresses movie images before storing them.
Image quality is expressed as image size in pixels. A
“pixel” is one of the many tiny dots that make up an image.
More pixels (a larger image size) provide finer detail and higher image quality when a movie is played back.
Before recording a movie, select the image quality setting that suits your needs.
1.
In a REC mode, press [MENU].
2.
Use [
왗] and [왘] to select the “Quality” tab.
3.
Use [
왖] and [왔] to select “
Quality” , and then press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals
119
OTHER RECORDING FUNCTIONS
Setting
Higher
Quality
Lower
Quality
HQ
(640
× 480 pixels)
Normal
(640
× 480 pixels)
LP
(320
× 240 pixels)
Approximate
Data Rate
4.0 megabits per second
2.1 megabits per second
745 kilobits per second
Frame Rate
30 frames/ second
30 frames/ second
15 frames/ second
Recording a Standard Movie
(Movie Mode)
Use the Movie Mode when you want to record a standard movie.
1.
In a REC mode, align the mode dial with
“ ”.
• This enters the Movie mode and causes “ ” to appear on the monitor screen.
Remaining recording time
Downloaded From camera-usermanual.com Casio Manuals
120
OTHER RECORDING FUNCTIONS
2.
Point the camera at the subject and then press the shutter button.
Recording time
• This starts movie recording, which is indicated by “
REC
” on the monitor screen.
• Movie recording continues as long as remaining memory capacity allows.
3.
To stop movie recording, press the shutter button again.
• When movie recording is complete, the movie file is stored in file memory.
■ Movie Recording Precautions
• This camera also records audio. Note the following points when recording a movie.
— Take care that you do not block the microphone with your fingers.
— Good recording results are not possible when the camera is too far from the subject.
— Operating camera
Microphone buttons during recording can cause button noise to be included in the audio.
— Movie audio is recorded in monaural.
— The camera focuses automatically whenever you have
Auto Focus or Macro ( ) (page 79) selected as the focus mode. Note that the confirmation tone that sounds during the Auto Focus operation will be recorded in the audio. If you do not want confirmation tones in your audio, keep Pan Focus ( ) as the focus mode, or select Manual Focus ( ) and manually focus the image before starting your recording.
Downloaded From camera-usermanual.com Casio Manuals
121
OTHER RECORDING FUNCTIONS
— Auto Focus is not performed in the case of the Pan
Focus ( ), Manual Focus ( ) and Infinity ( ) focus modes, and so no confirmation tone sounds. In the case of the Manual Focus mode, you cannot adjust focus settings while recording is in progress. Be sure to make all adjustments before beginning the record operation.
• Very bright light inside of an image can cause a vertical band to appear in the monitor screen image. This is a
CCD phenomenon known as “vertical smear”, and does not indicate malfunction of the camera. Note that vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a movie.
• The movie recording capacity of built-in memory is very small. Use of a memory card (page 203) is recommended when recording movies.
• Certain types of memory cards take longer to record data, which can cause movie frames to be dropped. and
REC
flash on the monitor screen during recording to let you know when a frame has been dropped.
• Optical zoom is disabled during movie recording. Digital zoom only is available. Make sure you select the optical zoom setting you want to use before you press the shutter button to start movie recording (page 63).
• The effects of camera movement in an image become more pronounced when you record close ups or recording with a large zoom factor. Because of this, use of a tripod is recommended when recording close ups or recording with a large zoom factor.
Downloaded From camera-usermanual.com Casio Manuals
122
• Images may be out of focus if the subject is outside the shooting range of the camera.
• Entering the Movie mode or MOVIE BEST SHOT mode automatically changes the focus mode to Pan Focus
(page 84), regardless of the current mode memory’s
(page 140) Focus setting.
• Certain types of subjects are difficult to focus (page 79) and may cause blurry images. If this happens, try changing the focus mode to Manual Focus (page 85) or
Pan Focus (page 84).
• If images are out of focus when using Auto Focus, you may be able to achieve proper focus by pointing the camera at another subject momentarily.
OTHER RECORDING FUNCTIONS
Instant Movie Setups
(MOVIE BEST SHOT Mode)
Simply select one of a collection of built-in sample movie scenes and the camera sets up for the scene you selected.
1.
In a REC mode, align the mode dial with “ ”, and then press [SET].
• This enters the MOVIE BEST SHOT mode and displays a sample scene selection screen. A selection boundary is located at the scene you last used.
• Sample scenes are arranged in sequence, starting from the upper left corner.
• The currently selected sample scene is the one with the selection boundary around it.
2.
Use [
왖], [왔], [왗], and [왘] to select the sample
scene you want, and then press [SET].
• If there are more than 12 scenes (because you have added some custom scenes), the screen will scroll to show the remaining scenes when you press [
왖], [왔],
[
왗], and [왘] while the selection boundary is located at the left or right edge of the screen.
3.
Point the camera at the subject and then press the shutter button.
4.
To stop movie recording, press the shutter button again.
IMPORTANT!
• MOVIE BEST SHOT scenes were not recorded using this camera. They are provided as samples only.
• Images recorded using a MOVIE BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors.
• You can change the camera settings that are made when you select a MOVIE BEST SHOT scene. Note, however, that the MOVIE BEST SHOT settings revert to their defaults when you select another
MOVIE BEST SHOT scene, change the recording mode, or turn off the camera. If you want to save your settings for later use, save them as a MOVIE
BEST SHOT user setup.
• Selecting “Night Scene” reduces the frame rate of movie recording (page 120).
Downloaded From camera-usermanual.com Casio Manuals
123
OTHER RECORDING FUNCTIONS
NOTE
• Turning on the camera while it is in the MOVIE BEST
SHOT Mode will cause operation guidance and the currently selected sample scene to appear on the monitor screen for about two seconds.
Displaying MOVIE BEST SHOT Sample
Scenes Individually
You can use the following procedure to display the MOVIE
BEST SHOT sample scenes individually, so you can view the explanation about each scene’s settings.
1
. In a REC mode, align the mode dial with “ ”, and then press [SET].
• This displays a sample scene selection screen. A selection boundary is located at the scene you last used.
2
. Move the zoom controller.
• This displays the explanation screen for the sample scene where the selection boundary was located on the selection screen.
• To return to the sample scene selection screen, move the zoom controller again.
3
. Use [
왗] and [왘] to select the sample scene
you want, and then press [SET].
4
. Press the shutter button to record the movie.
Downloaded From camera-usermanual.com Casio Manuals
124
OTHER RECORDING FUNCTIONS
Creating Your Own MOVIE BEST SHOT
Setup
You can use the procedure below to save the setup of a movie you recorded as a MOVIE BEST SHOT scene. After that, you can recall the setup whenever you want to use it.
1.
In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Use [
왖], [왔], [왗], and [왘] to display “Register
User Scene”, and then press [SET].
3.
Use [
왗] and [왘] to display the movie whose
setup you want to save.
4.
Use [
왖] and [왔] to select “Save”, and then
press [SET].
• The normal MOVIE BEST SHOT screen will reappear after the save operation is complete. Now you can use the procedure on page 123 to select your user setup for recording.
IMPORTANT!
• When selecting a user setup, scroll to the end of the built-in MOVIE BEST SHOT scenes until “Recall
User Scene” appears on the display. Then scroll further to see the user setup scenes.
• Formatting the camera’s built-in memory (page 202) deletes all user MOVIE BEST SHOT setups.
• The following are the settings that are included in a
MOVIE BEST SHOT user setup.
Focus mode, white balance mode, sharpness, saturation, contrast, EV shift
• Only the setup of a movie recorded with this camera can be saved as a MOVIE BEST SHOT setup.
• You can register up to 999 MOVIE BEST SHOT user setups.
• You can check the settings of the currently selected
MOVIE BEST SHOT scene by displaying the various setting menus.
• MOVIE BEST SHOT user setups are stored in camera built-in memory in the folder named
“MSCENE”. File names are assigned automatically using the format shown below.
UZ850nnn.JPE (n = 0 to 9)
Downloaded From camera-usermanual.com Casio Manuals
125
OTHER RECORDING FUNCTIONS
■ To delete a MOVIE BEST SHOT user setup
1.
In a REC mode, align the mode dial with “ ”, and then press [SET].
2.
Move the zoom controller to switch from the
12-scene screen to the sample scene.
3.
Use [
왗] and [왘] to display the user setup you
want to delete.
4.
Press [
왔] ( ).
5.
Use [
왖] and [왔] to select “Delete”, and then
press [SET].
6.
Select another scene, and then press [SET].
• This returns to the recording state.
Recording a Short Movie
Short Movie records a movie of preset length each time you press the shutter button.
Short Movie consists basically of two parts, as shown in the illustration below.
• When 4-second past part and 4-second future part is specified
Operation
➝
Shutter
Release
Action
➝
Stores the previous
4 seconds.
Record Store
Recording of the future part starts.
Storage complete.
Recording stops automatically
4 seconds after the shutter release button is pressed.
You can specify the length of the past part and the future part independently. The total length of the short movie can be anywhere from two to eight seconds. A MOTION PRINT feature (page 168) lets you capture still images from a short movie as you store it.
Downloaded From camera-usermanual.com Casio Manuals
126
OTHER RECORDING FUNCTIONS
■ To record a Short Movie
1.
In a REC mode, align the mode dial with “ ”.
2.
Use [
왖], [왔], [왗], and [왘] to select the “Short
Movie” scene, and then press [SET].
• Selecting the “Short Movie” scene causes “ ” to appear on the monitor screen.
3.
Press [ ].
4.
Use [
왖] and [왔] to
specify the length of the past part (the part before the shutter button is pressed), and then press [
왘].
• Times can be specified in one-second units.
• The total short movie length (past part plus future part) can be the range of two seconds to eight seconds.
Past part Future part
MOTION PRINT
• You can specify 0 seconds for the length of the past part or the future part.
• The length of the past part can be from 0 to five seconds.
5.
Use [
왖] and [왔] to specify the length of the
future part (the after part the shutter button is pressed), and then press [
왘].
Downloaded From camera-usermanual.com Casio Manuals
127
OTHER RECORDING FUNCTIONS
6.
Use [
왖] and [왔] to select the MOTION PRINT
layout format you want, and then press [SET].
Select this setting:
To do this:
Store a capture of the image at the point the shutter button is pressed to start Short Movie recording, and display it on a background of eight frames
Store a capture of the image at the point the shutter button is pressed to start Short Movie recording
9 frames
1 frame
Turn off MOTION PRINT (no snapshot stored) Off
7.
Point the camera at the subject and then press the shutter button.
• This will record a movie of the length specified by the time values you specified in steps 3 and 4.
Recording stops automatically.
• To stop recording part way through, press the shutter button again.
IMPORTANT!
• Note that Short Movie data is continually recorded and stored in a buffer before you press the shutter button. Be sure to keep the camera still and pointed in the direction of the subject for some time before you press the shutter button to start recording.
• When a Short Movie record operation starts future part recording, the monitor screen will show a countdown of the remaining recording time.
Recording continues until the end of the countdown is reached.
Downloaded From camera-usermanual.com Casio Manuals
128
OTHER RECORDING FUNCTIONS
Recording a Past Movie
Past Movie uses a 5-second buffer that is continually updated. Pressing the shutter button starts recording from five seconds prior to the point the button is pressed. Use
Past Movie when you want to make sure you do not miss fast-moving action.
Operation
➝
Shutter
Release
Action
➝
Stores the previous
5 seconds.
Recording of the future part starts.
Record
Shutter
Release
Store
Recording ends.
Storage complete.
1.
In a REC mode, align the mode dial with “ ”.
2.
Use [
왖], [왔], [왗], and [왘] to select the “Past
Movie” scene, and then press [SET].
• Selecting the “Past Movie” scene causes “ ” to appear on the monitor screen.
3.
Point the camera at the subject and then press the shutter button.
• This will record anything that went on in front of the lens during the previous five seconds and continue recording from the point that the shutter button was pressed. Recording can continue as long as there is memory available to store data.
4.
To stop recording, press the shutter button again.
IMPORTANT!
• When Past Movie is selected, the camera continually updates an internal buffer that holds about five seconds of movie images of what has happened in front of the camera’s lens. When you press the shutter button, your movie will start with the buffer’s current contents and continue from there. Be sure to keep the camera still and pointed in the direction of the subject for some time before you press the shutter button to start shooting.
Downloaded From camera-usermanual.com Casio Manuals
129
OTHER RECORDING FUNCTIONS
Shooting with the REC Light
You can turn on the camera’s
REC light (AF assist light/REC light/self-time lamp) when shooting where lighting is dim.
You can turn on the REC light while shooting snapshots to help framing. You can turn on the REC light while shooting a movie to illuminate your subject.
AF assist light/REC light/ self-timer lamp
1.
In a REC mode, align the mode dial with “ ” or “ ”.
2.
Press [MENU].
3.
Select the “REC” tab, select “REC Light”,and then press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To have the REC light do this:
Turn on only when available lighting is dim when recording
Always turn on the REC light when recording
Turn off the REC light when recording
Select this setting:
Auto
On
Off
• The “ ” or “ ” appears on the monitor screen while the REC light is auto or on.
5.
Press the shutter button to record the image or the movie.
Downloaded From camera-usermanual.com Casio Manuals
130
OTHER RECORDING FUNCTIONS
IMPORTANT!
• You also can use [
왔] ( ) to cycle through REC light settings (“Auto”
“On” “Off”) while movie recording is in progress.
• Never look directly into the AF assist light/REC light/ self-timer lamp or point it directly into the eyes of others.
• Never point the AF assist light/REC light/self-timer lamp in the direction of a person who is operating a motor vehicle.
• The effectiveness of the REC light is reduced in the case of faraway subjects.
Recording Audio
Adding Audio to a Snapshot
You can add audio to a snapshot after you record it.
• Image Format: JPEG
JPEG is an image format that provides efficient data compression.
The file extension of a JPEG file is “.JPG”.
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
• Recording Time:
Up to about 30 seconds per image
• Audio File Size:
Approximately 165KB (30-second recording of approximately 5.5KB per second)
NOTE
• You can play back an audio file recorded in the
Audio Snapshot mode on your computer using
Windows Media Player.
Downloaded From camera-usermanual.com Casio Manuals
131
C
OTHER RECORDING FUNCTIONS
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Audio Snap”, and then press [
왘].
3.
Use [
왖] and [왔] to select “On” and then press
[SET].
• This enters the Audio Snapshot mode.
• Selecting “Off” enters the Normal Snapshot mode
(no audio).
4.
Press the shutter button to record the image.
• After the image is recorded, the camera enters audio recording standby, with the image you just recorded on the monitor screen and displays a indicator.
Remaining recording time
5.
Press the shutter button to start audio recording.
• The green operation lamp will flash while recording is in progress.
6.
Recording stops after about 30 seconds or when you press the shutter button.
IMPORTANT!
• Audio snapshot recording is not supported (audio cannot be recorded) for “X3” self-timer recording
(Triple Self-timer).
Downloaded From camera-usermanual.com Casio Manuals
132
OTHER RECORDING FUNCTIONS
Recording Your Voice
Voice Recording provides quick and easy recording of your voice.
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
• Recording Time:
Approximately 24 minutes with built-in memory
• Audio File Size:
Approximately 165KB (30-second recording of approximately 5.5KB per second)
NOTE
• You can play back files recorded with Voice
Recording on your computer using Windows Media
Player.
Downloaded From camera-usermanual.com Casio Manuals
133
1.
In a REC mode, align the mode dial with
“ ”.
• Selecting the “Voice
Recording” scene causes “ ” to appear on the monitor screen.
Recording time
Remaining recording time
2.
Press the shutter button to start voice recording.
• The remaining recording time value counts down on the monitor screen and the green operation lamp flashes as recording is performed.
• Pressing [DISP] during voice recording turns off the monitor screen.
• You can insert index marks while recording by pressing [SET]. See page 179 for information about jumping to an index mark during playback.
3.
Recording stops when you press the shutter button, when memory becomes full, or when the battery goes dead.
B
OTHER RECORDING FUNCTIONS
■ Audio Recording Precautions
• Take care that you do not block the microphone with your fingers.
Using the Histogram
You can use [DISP] to display a histogram on the monitor screen (page 33). The histogram lets you check exposure conditions as you record images. You can also display the histogram of a recorded image in the PLAY mode.
Microphone
• Good recording results are not possible when the camera is too far from the subject.
• Pressing the power button or pressing [ ] (PLAY) stops recording and stores any audio recorded up to that point.
• You can also perform “after-recording” to add audio to a snapshot after recording it, and also change the audio recorded for an image. See page 177 for more information.
Downloaded From camera-usermanual.com Casio Manuals
134
Histogram
• A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indicates the number of pixels, while the horizontal axis indicates lightness. You can use the histogram to determine whether an image includes the shadowing (left side), mid tones (center), and highlighting (right) required to bring out sufficient image detail. If the histogram appears too lopsided for some reason, you can use EV shift (exposure compensation) to move it left or right in order to achieve better balance. Optimum exposure can be achieved by correcting exposure so the graph is as close to the center as possible.
OTHER RECORDING FUNCTIONS
• An RGB histogram that shows the distribution of R (red),
G (green), and B (blue) components is also displayed.
This histogram can be used to determine whether there is too much or too little of each of the color components in an image.
NOTE
• You can use key customization (page 137) to configure the camera to perform exposure compensation whenever you press [
왗] or [왘] while in a REC mode. If you do this, you can adjust exposure compensation while viewing the on-screen histogram
(page 88).
• When the histogram is too far to the left, it means that there are too many dark pixels.
This type of histogram results when the overall image is dark. A histogram that is too far to the left may result in
“black out” of the dark areas of an image.
• When the histogram is too far to the right, it means that there are too many light pixels.
This type of histogram results when the overall image is light. A histogram that is too far to the right may result in
“white out” of the light areas of an image.
Downloaded From camera-usermanual.com Casio Manuals
135
OTHER RECORDING FUNCTIONS
• A centered histogram indicates that there is good distribution of light pixels and dark pixels. This type of histogram results when the overall image is at optimal lightness.
Downloaded From camera-usermanual.com Casio Manuals
136
IMPORTANT!
• Note that the above histograms are shown for illustrative purposes only. You may not be able to achieve exactly the same shapes for particular subjects.
• A centered histogram does not necessarily guarantee optimum exposure. The recorded image may be over-exposed or under-exposed, even though its histogram is centered.
• You may not be able to achieve an optimum histogram configuration due to the limitations of EV shift.
• Use of the flash as well as certain shooting conditions can cause the histogram to indicate exposure that is different from the actual exposure of the image when it was recorded.
• The RGB (color component) histogram is displayed for snapshots only.
• The RGB (color component) histogram is displayed for snapshots only. In the following modes, only the luminance distribution histogram appears on the monitor screen.
Movie mode, MOVIE BEST SHOT mode
OTHER RECORDING FUNCTIONS
REC Mode Camera Settings
The following are the settings you can configure before recording an image using the REC mode.
• L/R key setting (key customization)
• Grid on/off
• Image Review on/off
• Icon Help on/off
• Power on default settings
• ISO sensitivity
• Metering
• Filter
• Sharpness
• Saturation
• Contrast
• Timestamp
• Resetting the camera
Downloaded From camera-usermanual.com Casio Manuals
137
Assigning Functions to the [
왗] and [왘]
Keys
A “key customization” feature lets you configure the [
왗] and [
왘] keys so they change camera settings whenever they are pressed in a REC mode. After you configure the
[
왗] and [왘] keys, you can change the setting assigned to them without going through the menu screen.
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “L/R Key”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
• After you assign a function, you can change its setting simply by pressing the [
왗] and [왘] keys.
— EV Shift (page 88)
— White Balance (page 89)
— ISO (page 142)
— Metering (page 143)
— Self-timer (page 73)
— Off: No function assigned
OTHER RECORDING FUNCTIONS
IMPORTANT!
• While recording a snapshot or movie, you can use
[
왗] and [왘] to set the functions assigned to them.
However, you cannot set the self-timer during movie recording.
Turning the On-screen Grid On and Off
You can display gridlines on the monitor screen to help you compose images and ensure that the camera is straight when recording.
Downloaded From camera-usermanual.com Casio Manuals
138
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Grid”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Display the grid
Hide the grid
Select this setting:
On
Off
OTHER RECORDING FUNCTIONS
Turning Image Review On and Off
Image review displays the images you record on the monitor screen as soon as you record them. Use the following procedure to turn image review on and off.
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Review”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Display images on the monitor screen for about one second immediately after they are recorded
Do not display images immediately after they are recorded
Select this setting:
On
Off
Using Icon Help
Icon Help displays guidance text about an icon when you select it on the monitor screen while in a REC mode (page
29).
• Icon Help text is displayed for the following functions:
— Focus mode, white balance, self-timer, metering, REC modes.
— EX menu screen (page 149) image size, white balance, AF area.
Note, however, that metering, self-timer and white balance icon help text appears only when “Metering”,
“Self-timer” or “White Balance” is assigned to the [
왗] and
[
왘] keys with the key customization feature (page 137).
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Icon Help”, and then press [
왘].
Downloaded From camera-usermanual.com Casio Manuals
139
OTHER RECORDING FUNCTIONS
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Display guidance text when you select an icon on the monitor screen.
Turn off Icon Help
Select this setting:
On
Off
IMPORTANT!
• The icons listed below do not appear on the display while Icon Help is turned off.
— Focus mode icon (page 79)
— White balance
AWB
icon (page 89)
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the power on default settings individually for the flash mode, focus mode, white balance mode, ISO sensitivity, AF Area, metering, self-timer, flash intensity, digital zoom mode, manual focus position and zoom position. Turning on mode memory for a mode tells the camera to remember the status of that mode when you turn off the camera, and restore it the next time you turn the camera back on. When mode memory is turned off, the camera automatically restores the initial factory default setting for the applicable mode.
— The following table shows what happens when you turn mode memory on or off for each mode.
Downloaded From camera-usermanual.com Casio Manuals
140
OTHER RECORDING FUNCTIONS
Function
Flash
Focus
White Balance
ISO
AF Area
Metering
Self-timer
Flash Intensity
Digital Zoom
MF Position
On
Setting when camera is turned off
Off
Auto
Auto
Auto
Auto
Spot
Multi
Off
0
On
Last Auto Focus position that was in effect before you switched to manual focus
Wide Zoom Position*
* Only the optical zoom position is remembered.
1.
In a REC mode, press [MENU].
2.
Select the “REC” tab, select “Memory”, and then press [
왘].
3.
Use [
왖] and [왔] to select the item you want to
change, and then press [
왘].
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings are restored at power on
Turn off mode memory so settings are initialized at power on
Select this setting:
On
Off
Downloaded From camera-usermanual.com Casio Manuals
141
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Note that BEST SHOT mode settings take priority over mode memory settings. If you turn the camera off while in the BEST SHOT mode, all settings except for “Zoom Position” will be configured according to the BEST SHOT sample scene when you turn it back on again, regardless of mode memory on/off settings.
• In the following modes, “ ” (Flash Off) is always selected as the flash mode regardless of mode memory on/off setting.
Movie mode, MOVIE BEST SHOT mode
Specifying ISO Sensitivity
You can change the ISO sensitivity setting for better images in places where lighting is dim or when you are using faster shutter speeds.
• ISO sensitivity is expressed in terms of values that originally indicated the sensitivity to light for photographic film. A larger value indicates higher sensitivity, which is better for recording when available lighting is dim.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “ISO”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you want
and then press [SET].
To get this:
Automatic sensitivity selection
Lower sensitivity
Higher sensitivity
Select this setting:
Auto
ISO 50
ISO 100
ISO 200
ISO 400
Downloaded From camera-usermanual.com Casio Manuals
142
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Under certain conditions, a high shutter speed in combination with a high ISO sensitivity setting can cause digital noise (graininess), which makes an image appear rough. For clean, good-quality images, use the lowest ISO sensitivity setting possible.
• Using a high ISO sensitivity setting along with the flash to shoot a nearby subject may result in improper illumination of the subject.
• “Auto” ISO sensitivity always is used in the following cases, regardless of the current ISO sensitivity setting.
Movie mode, MOVIE BEST SHOT mode
NOTE
• You can use the key customization feature (page
137) to configure the camera so the ISO sensitivity setting changes whenever you press [
왗] and [왘] while in a REC mode.
Selecting the Metering Mode
The metering mode determines what part of the subject is metered for exposure. You can use the following procedure to change the camera’s metering mode.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “Metering”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals
143
OTHER RECORDING FUNCTIONS
Multi (Multi pattern)
Multi (Multi pattern) metering divides the image into sections and measures the light in each section for a balanced exposure reading. The camera automatically determines shooting conditions according to the measured lighting pattern, and makes exposure settings accordingly. This type of metering provides error-free exposure settings for a wide range of shooting conditions.
Center Weighted
Center weighted metering measures light concentrating on the center of the focus area. Use this metering method when you want to exert some control over exposure, without leaving settings totally up to the camera.
Spot
Spot metering takes readings at a very small area. Use this metering method when you want exposure to be set according to the brightness of a particular subject, without it being affected by surrounding conditions.
Downloaded From camera-usermanual.com Casio Manuals
144
IMPORTANT!
• When “Multi” is selected as the metering mode, certain procedures cause the metering mode setting to change automatically as described below.
• Changing the exposure compensation setting (page
88) to a value other than 0.0 changes the metering mode setting to “Center Weighted.” The metering mode changes back to “Multi” when you return the exposure compensation setting to 0.0.
• When “Multi” is selected, the icon is not displayed when you return to the REC modes information display (page 29).
OTHER RECORDING FUNCTIONS
Using the Filter Function
The camera’s filter function lets you alter the tint of an image when you record it.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “Filter”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
• Available filter settings are: Off, B/W, Sepia, Red,
Green, Blue, Yellow, Pink, Purple
IMPORTANT!
• Using the camera’s filter feature produces the same effect as attaching a color filter to the lens.
Specifying Outline Sharpness
Use the following procedure to control the sharpness of image outlines.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “Sharpness”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To get this:
High sharpness
Normal sharpness
Low sharpness
Select this setting:
+2
+1
0
–1
–2
Downloaded From camera-usermanual.com Casio Manuals
145
OTHER RECORDING FUNCTIONS
Specifying Color Saturation
Use the following procedure to control the intensity of the image you are recording.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “Saturation”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To get this:
High color saturation (intensity)
Normal color saturation (intensity)
Low color saturation (intensity)
Select this setting:
+2
+1
0
–1
–2
Specifying Contrast
Use this procedure to adjust the relative difference between the light areas and dark areas of the image you are recording.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “Contrast”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To get this:
High contrast
Normal contrast
Low contrast
Select this setting:
+2
+1
0
–1
–2
Downloaded From camera-usermanual.com Casio Manuals
146
OTHER RECORDING FUNCTIONS
Date Stamping Snapshots
You can have the snapshot’s recording date only, or date and time stamped in the lower right corner of the image.
1.
In a REC mode, press [MENU].
2.
Select the “Set Up” tab, select “Timestamp”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
Example: December 24, 2006, 1:25 p.m.
To include this date stamp information:
Recording date (2006/12/24)
Recording date and time
(2006/12/24 1:25pm)
Nothing
Select this setting:
Date
Date&Time
Off
IMPORTANT!
• Once date information is stamped in a print, it cannot be deleted.
• Use the “Date Style” setting (page 195) to specify the format of the date.
• The recording date and time are determined in accordance with the camera’s clock settings (pages
51, 194) when the snapshot is recorded.
• Digital zoom is not supported while date stamping
(“Date” or “Date&Time”) is turned on (page 65).
• Date stamping is not supported for the following types of images.
— Images recorded with certain BEST SHOT scenes
(“Business Cards and Documents”, “Whiteboard, etc.”, “Old Photo”, “ID Photo”, “Pastel”,
“Illustration”, “Cross”)
— Images recorded with the zoom continuous shutter mode and multi continuous shutter mode
(pages 100, 101)
Downloaded From camera-usermanual.com Casio Manuals
147
B
OTHER RECORDING FUNCTIONS
Resetting the Camera
Use the following procedure to reset all of the camera’s settings to their initial defaults as shown under “Menu
Reference” on page 259.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Reset”, and then press [
왘].
3.
Use [
왖] and [왔] to select “Reset”, and then
press [SET].
• To cancel the procedure without resetting, select
“Cancel” and press [SET].
IMPORTANT!
• The following are not initialized when you reset the camera (page 259).
— Home Time setup
— World Time setup
— Adjust
— Date Style
— Language
— Video Out
Downloaded From camera-usermanual.com Casio Manuals
148
OTHER RECORDING FUNCTIONS
Using the Shortcut Menu (EX Menu)
Pressing [EX] displays a shortcut menu that you can use to configure image size, white balance, ISO sensitivity, and
AF area settings.
1.
In a REC mode, press
[EX].
2.
Use [
왗] and [왘] to select the item you want,
and then use [
왖] and [왔] to scroll through the
available settings.
• Refer to the following pages for details about each of the settings.
— Specifying Image Size (page 76)
— Adjusting the White Balance (page 89)
— Specifying ISO Sensitivity (page 142)
— Specifying the Auto Focus Area (page 82)
3.
After configuring the settings you want, press
[SET] to exit the shortcut menu.
Downloaded From camera-usermanual.com Casio Manuals
149
PLAYBACK
PLAYBACK
You can use the camera’s built-in monitor screen to view images after you record them.
Basic Playback Operation
Use the following procedure to scroll through files stored in the camera’s memory.
1.
Press [ ] (PLAY) to turn on the camera.
• This enters the PLAY mode and causes an image or a message to appear on the monitor screen.
[ ]
PLAY mode file type Folder name/ File name
Image quality
Image size
Date and time
Downloaded From camera-usermanual.com Casio Manuals
150
2.
Use [
왘] (forward) or [왗] (back) to scroll
through files on the monitor screen.
NOTE
• Holding down [
왗] or [왘] scrolls images at high speed.
• In order to allow for faster playback image scrolling, the image that initially appears on the monitor screen is a preview image, which is of somewhat lower quality than the actual display image. The actual display image appears a short while after the preview image. This does not apply to images copied from another digital camera.
PLAYBACK
Playing an Audio Snapshot
Perform the steps below to display an audio snapshot
(indicated by ) and play its audio.
1.
In the PLAY mode, use [
왗] and [왘] until the
image you want is displayed.
2.
Press [SET].
• This plays back the audio that accompanies the displayed image.
• You can perform the following operations while audio is playing.
To do this:
Fast forward or fast reverse the audio
Pause and unpause audio playback
Adjust audio volume
Changing display contents
Cancel playback
Do this:
Hold down [
왗] or [왘].
Press [SET].
Press [
왔] and then use [왖] and [
왔].
Press [DISP].
Press [MENU].
Downloaded From camera-usermanual.com Casio Manuals
151
IMPORTANT!
• Audio volume can be adjusted only when playback is being performed or is paused.
PLAYBACK
Zooming the Display Image
Perform the following procedure to zoom the image currently on the monitor screen up to eight times its normal size.
1.
In the PLAY mode, use [
왗] and [왘] to display
the image you want.
2.
Shift the zoom controller towards
( ) to enlarge the image.
• This zooms the image.
• An indicator appears in the lower right corner, that shows what part of the original image is currently displayed on the monitor screen.
• You can toggle display of the zoom factor on and off by pressing
[DISP].
Current zoom factor
Original image
Displayed part
3.
Use [
왖], [왔], [왗], and [왘] to shift the image
up, down, left, or right.
4.
Press [MENU] to return the image to its original size.
IMPORTANT!
• Depending on the original size of the recorded image, you may not be able to zoom a display image the full eight times normal size.
Downloaded From camera-usermanual.com Casio Manuals
152
PLAYBACK
Resizing an Image
You can resize a recorded image to one of three sizes.
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Resize”, and then press [
왘].
• Note that this operation is possible only when a snapshot image is on the monitor screen.
3.
Use [
왗] and [왘] to scroll through images and
display the one you want to resize.
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
• When selecting the image size, the image size value
(pixels) will alternate on the display with a corresponding print size. The print size indicates the optimum paper size when you print an image that is the image size you select.
Image Size
6M
4M
2816
× 2112
2304
× 1728
VGA 640
× 480
Print Size
A3 Print
A4 Print
E-mail (optimum size when attaching image to e-mail)
Larger
Smaller
* “M” stands for “Mega.”
• To cancel the resize operation, select “Cancel”.
Downloaded From camera-usermanual.com Casio Manuals
153
PLAYBACK
IMPORTANT!
• Resizing an image creates a new file that contains the image in the size you select. The file with the original image also remains in memory.
• Note that you cannot resize the following types of images.
— 640
× 480 pixel and smaller images
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• The resize operation cannot be performed when there is not enough memory to store the resized image.
• When you display a resized image on the camera’s monitor screen, the date and time that appear when the image is displayed indicate when the image was originally recorded, not when the image was resized.
• When a resized image is displayed on the calendar screen (page 171), it will appear on the date it was resized.
Cropping an Image
You can use the following procedure to crop a portion of an enlarged image.
1.
In the PLAY mode, use [
왗] and [왘] to scroll
through images and display the one you want to crop.
2.
Press [MENU].
3.
Select the “PLAY” tab, select
“Trimming”, and then press [
왘].
• An indicator appears in the lower right corner, that shows what part of the original image is currently displayed on the monitor screen.
Current zoom factor
Original image
Displayed part
Downloaded From camera-usermanual.com Casio Manuals
154
PLAYBACK
4.
Move the zoom controller left and right to zoom the image.
• The part of the image displayed on the monitor screen is the cropped part.
5.
Use [
왖], [왔], [왗], and [왘] to to scroll the part
to be cropped up, down, left, and right.
6.
Press [SET] to extract the part of the image enclosed in the cropping boundary.
• If you want to cancel the procedure at any point, press [MENU].
IMPORTANT!
• Trimming an image causes the original (pre-trimmed) image and the new (trimmed) version to be stored as separate files.
• Note that you cannot crop the following types of images.
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• The cropping operation cannot be performed when there is not enough memory to store the cropped image.
• When you display a cropped image on the camera’s monitor screen, the date and time that appear when the image is displayed indicate when the image was originally recorded, not when the image was cropped.
• When a cropped image is displayed on the calendar screen (page 171), it will appear on the date it was cropped.
Downloaded From camera-usermanual.com Casio Manuals
155
PLAYBACK
Keystone Correction
Use the following procedure to correct the snapshot of a blackboard, document, poster, photograph, or other rectangular object that is out of square because it was recorded at an angle.
• Performing keystone correction on an image causes a new (corrected) version (1600
× 1200 pixels) to be stored as a separate file.
1.
In the PLAY mode, use [
왗] and [왘] to scroll
through images on the monitor screen and display the one you want to correct.
2.
Select the “PLAY” tab, select “Keystone”, and then press [
왘].
• This causes a screen that shows all of the objects in the image that qualify as candidates for keystone correction to appear.
• Note that the above step is possible only when there is a snapshot displayed on the monitor screen.
3.
Use [
왗] and [왘] to
select the candidate you want to correct.
4.
Use [
왖] and [왔] to select “Correct”, and then
press [SET].
• Select “Cancel” to exit the procedure without performing keystone correction.
Downloaded From camera-usermanual.com Casio Manuals
156
PLAYBACK
IMPORTANT!
• If the original image is smaller than 1600
× 1200 pixels, the new (corrected) version is the same size as the original one.
• Keystone correction cannot be performed on the following types of images.
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• The keystone correction operation cannot be performed if there is not enough memory to store the corrected image.
• When you display a corrected image on the camera’s monitor screen, the date and time indicate when the image was originally recorded, not when the image was corrected.
• When a keystone corrected image appears on the full-month calendar screen, it is displayed on the date that it was corrected (page 171).
Downloaded From camera-usermanual.com Casio Manuals
157
Using Color Restoration to Correct the
Color of an Old Photograph
Color restoration let you correct the old color of a photograph shot with a digital camera. This function is useful for correcting existing old photographs, posters, etc.
• Performing color restoration on an image causes a new
(restored) version (1600
× 1200 pixels) to be stored as a separate file.
1.
In the PLAY mode, use [
왗] and [왘] to scroll
through images on the monitor screen and display the one you want to correct.
2.
Select the “PLAY” tab, select “Color
Correction”, and then press [
왘].
3.
Use [
왗] and [왘] to select the photograph
candidate you want.
4.
Use [
왖] and [왔] to select “Correct”, and then
press [SET].
• This displays a cropping boundary on the monitor screen.
• To exit color restoration without storing anything, select “Cancel”.
PLAYBACK
5.
Move the zoom controller left and right to zoom the cropping boundary.
• Resize the cropping boundary as required to crop the area you want.
6.
Use [
왖], [왔], [왗], and [왘] to move the
cropping boundary to the location you want, and then press [SET].
• The camera will correct color automatically and save the image.
• If you do not want a border around the image, configure the cropping boundary so it is slightly inside of the boundary of the displayed image.
• To exit color restoration without saving anything, press [MENU].
IMPORTANT!
• If the original image is smaller than 1600
× 1200 pixels, the new (restored) version is the same size as the original one.
• Note that you cannot correct the following types of images.
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• The color correct operation cannot be performed if there is not enough memory to store the corrected image.
• When you display a restored image on the camera’s monitor screen, the date and time indicate when the image was originally recorded, not when the image was corrected.
• When a corrected image appears on the full-month calendar screen, it is displayed on the date that it was corrected (page 171).
NOTE
• If you want to record the image of an old photograph with this camera and restore the resulting image, see
“Restoring an Old Photograph” on page 113.
Downloaded From camera-usermanual.com Casio Manuals
158
PLAYBACK
Adjusting White Balance of a Recorded
Image
You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image.
1.
In the PLAY mode, use [
왗] and [왘] to display
the image whose white balance setting you want to change.
2.
Press [MENU].
3.
Select the “PLAY” tab, select “White
Balance”, and then press [
왘].
• Note that the above step is possible only when there is a snapshot displayed on the monitor screen.
4.
Use [
왖] and [왔] to select a white balance
setting, and then press [SET] to apply it.
When you want the image to appear like it was recorded under these conditions:
Outdoors, fair weather
Outdoors, cloudy to rain, in tree shade, etc.
Under very high temperatures light, such as building shade, etc.
Under white or daylight white fluorescent lighting, without suppressing color cast
Under daylight fluorescent lighting, while suppressing color cast
Under incandescent lighting, while suppressing color cast
Cancel white balance adjustment
Select this setting:
N
D
Cancel
Downloaded From camera-usermanual.com Casio Manuals
159
PLAYBACK
• Normally, the initially selected white balance setting on the above menu is the one that was used when you originally recorded the image. If you used the
“Auto” or “Manual” white balance setting when you recorded the image, “Cancel” will be selected (page
89).
• If you select the same white balance setting as the one you selected when you originally recorded the image, pressing [SET] will exit the white balance adjustment menu without changing the image.
IMPORTANT!
• Adjusting the white balance of an image creates a new image with the new white balance setting. The original image also remains in memory.
• The white balance of the following types of images cannot be adjusted.
— Movie images and voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• You cannot adjust white balance when there is not enough free memory available to save the resulting image.
• When you display an image whose white balance has been adjusted on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the white balance was adjusted.
Downloaded From camera-usermanual.com Casio Manuals
160
PLAYBACK
Adjusting Image Brightness
Use the following procedure to adjust the brightness of snapshots.
1.
In the PLAY mode, use [
왗] and [왘] to scroll
through images and display the one whose brightness you want to adjust.
2.
Press [MENU].
3.
Select the “PLAY” tab, select “Brightness”, and then press [
왘].
• Note that the above step is possible only when there is a snapshot displayed on the monitor screen.
4.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To get this:
Brighter
Select this setting:
+2
+1
0
–1
–2 Darker
• To cancel the brightness adjustment operation, press
[
왗] or [MENU].
Downloaded From camera-usermanual.com Casio Manuals
161
PLAYBACK
IMPORTANT!
• Adjusting the brightness of an image creates a new image with the new brightness level. The original image also remains in memory.
• The brightness of the following types of images cannot be adjusted.
— Movie images and voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• You cannot adjust brightness when there is not enough free memory available to save the resulting image.
• When you display a brightness adjusted image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the brightness was adjusted.
Playing and Editing a Movie
Playing a Movie
Use the following procedure to play a movie you recorded with this camera.
1.
In the PLAY mode, use [
왗] and [왘] to
scroll through movies on the monitor screen and display the one you want.
Elapsed recording time
Movie icon
Image quality
2.
Press [SET].
• This starts playback of the movie.
• You can perform the following operations while a movie is playing.
Downloaded From camera-usermanual.com Casio Manuals
162
PLAYBACK
To do this:
Fast forward or fast reverse playback
• Each press increases the speed one more step.
Return fast forward or fast reverse movie playback to normal speed
Pause movie playback
Scroll paused playback one frame
Stop movie playback
Adjust the movie audio volume level
Toggle monitor screen indicators on and off
Zoom the movie image
Do this:
Press [
왗] or [왘].
Press [SET].
Press [SET].
Press [
왗] or [왘].
Press [MENU].
Press [
왔] and then use
[
왖] and [왔].
Press [DISP].
Move the zoom controller towards
( ).
Scroll a zoomed movie image on the monitor screen
Use [
왖], [왔], [왗], [왘].
IMPORTANT!
• You can adjust the volume level of movie audio during movie playback only.
• You can zoom a movie up to 8 times normal size.
Note, however, that maximum zoom becomes 4.5
times in the following cases.
— When the movie was shot with the “LP” quality setting (page 119)
— When playing back any movie on a TV screen
• Playback may not be possible for movies not recorded with this camera.
Downloaded From camera-usermanual.com Casio Manuals
163
PLAYBACK
Playing Back a Movie with Anti Shake
Use the following procedure when you want to play back a movie with Anti Shake. Anti Shake is particularly useful when you have the camera connected to a TV for viewing, since the effects of camera movement are more evident on a big screen.
1.
In the PLAY mode, use [
왗] and [왘] to display
the movie you want to play with Anti Shake.
2.
Press [EX] to turn on Anti Shake.
•
• Each press of [EX] toggles Anti Shake on and off.
(Anti Shake indicator) is displayed on the monitor screen while Anti Shake is turned on.
3.
After the setting is the way you want, press
[SET].
NOTE
• You can press [EX] to turn Anti Shake on and off while the movie is stopped or playing.
• You can also use the following procedure to turn Anti
Shake on and off.
1. While a movie is playing, press [MENU].
2. Select the “PLAY” tab, select “ Anti Shake”, and then press [
왘].
3. Use [
왖] and [왔] to select “On”, and then press
[SET].
• When Anti Shake is turned on, the area of the monitor screen used for playback is slightly smaller than normal.
Downloaded From camera-usermanual.com Casio Manuals
164
PLAYBACK
Editing a Movie
Use the procedure in this section to edit and delete movies.
Editing operations let you cut everything before or after a specific frame, or to cut everything between two frames.
IMPORTANT!
• Cut operations cannot be undone. Make sure you really want to cut the part of the movie you are specifying before executing the cut operation.
• Movie editing is not possible for movies not recorded with this camera.
• A movie that is shorter than five seconds cannot be edited.
• Certain types of memory cards can cause the movie cut operation to take considerable time. This is normal and does not indicate malfunction.
• You will not be able to perform the cut operation if the amount of memory available is less than the size of the movie file you are cutting. If this happens, delete any files you no longer need to free up more memory.
• Splicing of two different movies into a single movie or cutting one movie into multiple parts are not supported by camera operations.
Downloaded From camera-usermanual.com Casio Manuals
165
■ To cut everything before or after a specific
frame
1.
While the movie you are editing is playing, press [SET].
• This will pause movie playback.
2.
Press [
왔].
• You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then pressing [
왘].
3.
Use [
왖] and [왔] to select the operation you
want to perform.
To do this:
Cut everything before a specific frame
Cut everything after a specific frame
Exit the cut mode
Select this setting:
Cancel
Cut
Cut
PLAYBACK
4.
Display the frame where you want the cut to be located.
To do this:
Fast forward or fast reverse playback
Pause or unpause movie playback
Scroll paused playback one frame
Cancel the cut operation
Do this:
Press [
왗] or [왘].
Press [SET].
Press [
왗] or [왘].
Press [MENU].
• The red portion of the indicator bar shows what part will be cut.
5.
When the frame you want is displayed, press [
왔].
6.
Use [
왖] and [왔] to select “Yes”, and then
press [SET].
• The message “Busy.... Please wait...” will remain on the display as the cut operation is performed. Cutting is complete when the message disappears.
• Select “No” to exit the cut mode.
Downloaded From camera-usermanual.com Casio Manuals
166
PLAYBACK
■ To cut everything between two specific
frames
1.
While the movie is playing, press [SET].
• This will pause movie playback.
2.
Press [
왔].
• You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then pressing [
왘].
3.
Use [
왖] and [왔] to select “
then press [SET].
• Select “Cancel” to exit the cut mode.
Cut”, and
4.
Display the starting frame where you want the first cut to be located.
To do this:
Fast forward or fast reverse playback
Pause or unpause movie playback
Scroll paused playback one frame
Cancel the cut operation
Do this:
Press [
왗] or [왘].
Press [SET].
Press [
왗] or [왘].
Press [MENU].
5.
When the frame you want is displayed, press [
왔].
Downloaded From camera-usermanual.com Casio Manuals
167
PLAYBACK
6.
Referring to step 4, search for the cut end screen. When the cut end screen is displayed, press [
왔].
• The red portion of the indicator bar shows what part will be cut.
7.
Use [
왖] and [왔] to select “Yes”, and then
press [SET].
• The message “Busy.... Please wait...” will remain on the display as the cut operation is performed. Cutting is complete when the message disappears.
• Select “No” to exit the cut mode.
Capturing a Still Image from a Movie
(MOTION PRINT)
The MOTION PRINT feature lets you capture a frame from an existing movie and create a still image that is suitable for printing. There are two layouts you can use when capturing an image, and the layout you select determines the final image size.
• 9 frames (1600
× 1200-pixel final image size)
Background images
Selected main image
• 1 frame (640
× 480-pixel final data size)
Selected main image
Downloaded From camera-usermanual.com Casio Manuals
168
PLAYBACK
■ To capture a still image from a movie
1.
In the PLAY mode, use [
왗] and [왘] to scroll
through movies on the monitor screen and display the one that contains the frames you want.
2.
Press [MENU].
3.
Select the “PLAY” tab, select “MOTION
PRINT”, and then press [
왘].
4.
Use [
왖] and [왔] to
select the layout (“1 frame” or “9 frames”) you want to use.
• Select “Cancel” to exit the MOTION PRINT mode.
5.
Use [
왗] and [왘] to display the frame that you
want to use as the main image.
• Holding down either button scrolls at high speed.
6.
After selecting the frame you want, press
[SET].
• This displays the resulting still image.
• If you selected “9 frames” for the layout, the frame you selected in step 4 will be the main image, and the frames on either side of it will be used as the background frames.
• If you selected “1 frame” in step 4, an image of the frame you selected in step 6 appears here.
IMPORTANT!
• MOTION PRINT is not possible for movies not recorded with this camera.
Downloaded From camera-usermanual.com Casio Manuals
169
PLAYBACK
Displaying the 9-image View
The following procedure displays nine images on the monitor screen at the same time.
1.
In the PLAY mode, shift the zoom controller towards ( ).
• This displays the 9-image screen with the image that was on the monitor screen in step 2 in the center, with a selection boundary around it.
• If there are fewer than nine images in memory, they are displayed starting from the upper left corner. The selection boundary is located at the image that was on the display before you switched to the 9-image view.
•
• For a movie file (page 162), “ the top and bottom of the screen.
” is displayed at
• On the 9-image screen, indicates a voice recording file (page 179).
appears in place of the image when the date contains data that cannot be displayed by this camera.
2.
Use [
왖], [왔], [왗], and
[
왘] to move the
selection boundary to the image you want.
Pressing [
왘] while
the selection boundary is in the right column or [
왗]
while it is in the left column scrolls to the next full screen of nine images.
Selection boundary
Example: When there are 20 images in memory, and
Image 1 is displayed first
1
4
7
2
5
8
3
6
9
10 11 12
13 14 15
16 17 18
19 20
3.
Pressing any button besides [
왖], [왔], [왗], or
[
왘] displays the full-size version of the image
where the selection boundary is located.
Downloaded From camera-usermanual.com Casio Manuals
170
PLAYBACK
Displaying the Calendar Screen
Use the following procedure to display a 1-month calendar.
Each day shows the first file recorded on that day, which makes it easy to find the file you want.
1.
In the PLAY mode, press [
왖] ( ).
• Use the procedure under “Changing the
Date Format” on page
195 to specify the date format.
• The file displayed on the calendar for each date is the first file that was recorded on that date.
• To exit the calendar screen, press [MENU] or [DISP].
Year/Month
Date selection cursor
•
• On the calendar screen, indicates a voice recording file (page 179).
appears in place of the image when the date contains data that cannot be displayed by this camera.
2.
Use [
왖], [왔], [왗], and [왘] to move the
selection boundary to the date you want, and then press [SET].
• This displays an image of the first file that was recorded on the selected date.
Downloaded From camera-usermanual.com Casio Manuals
171
PLAYBACK
Playing a Slideshow
A slideshow automatically plays back images in sequence at a fixed interval.
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Slideshow”, and then press [
왘].
3.
Use the screen that appears to configure the image, time, interval, and effect settings.
Images
Time
Interval
• All Images
Displays all images in camera memory.
• OnIy
This icon appears only in the case of snapshots and audio snapshots.
• OnIy
This icon appears only in the case of movies.
• One Image
Displays a particular image.
• Favorites
Displays all images in the FAVORITE folder.
Use [
왗] and [왘] to specify the playback time you want (1 to 5 minutes, or 10, 15, 30, or 60 minutes).
Use [
왗] and [왘] to specify the interval you want
(MAX, or 1 to 30 seconds).
• When playback reaches a movie file while
“MAX” is selected as the interval, only the first frame of the movie is displayed.
Downloaded From camera-usermanual.com Casio Manuals
172
PLAYBACK
Effect
• Pattern 1, 2, 3
Applies a preset effect when transitioning from one image to another.
• Random
Randomly applies the preset patterns (1, 2, and 3).
• OFF
Effects turned off.
4.
Use [
왖] and [왔] to select “Start”, and then
press [SET].
• This starts the slideshow.
5.
To stop the slideshow, press [SET].
• The slideshow will also stop automatically after the amount of time you specified for “Time” elapses.
IMPORTANT!
• Note that all buttons are disabled while an image change is in progress. Wait until an image is stopped on the monitor screen before performing a button operation, or hold down the button until the image stops.
• Pressing [
왗] during a slideshow will scroll to the previous image, while [
왘] scrolls to the next image.
• When the slideshow comes to a movie file, it plays the movie and its audio once.
• When the slideshow comes to a voice recording file or an audio snapshot, it plays the audio once.
• The audio of movies, audio snapshots, and voice recording files is not played when “MAX” is specified for the slideshow “Interval” setting. With all other
“Interval” settings, movies and all audio (movies, audio snapshots, voice recording files) are played back, regardless of their length.
• During audio playback, you can adjust volume by pressing [
왔] and then using [왖] and [왔].
Downloaded From camera-usermanual.com Casio Manuals
173
PLAYBACK
• Note that effect settings are disabled when the slideshow “Images” setting is “Favorites” or “
Only”, or when the slideshow “Interval” setting is
“MAX”, “1 sec”, or “2 sec”.
• Images copied from another digital camera or a computer may take longer time to appear than the slideshow interval time you specify.
• If there are indicators on the display, you can clear them by pressing [DISP] (page 33).
• When the slideshow reaches a movie while “One
Image” is selected for “Images”, the movie will repeat playback for the time specified by for “Time”.
Using the Photo Stand Feature
The “Photo Stand” feature lets you specify what should appear on the camera’s monitor screen while the camera is on its USB cradle. You can play a Photo Stand slideshow without worrying about remaining battery power, or you can specify display of a particular image. Photo Stand feature operations are performed in accordance with slideshow setting. See page 172 for information about configuring slideshow settings to suit your needs.
1.
Turn off the camera.
2.
Set the camera onto the USB cradle.
3.
Press the USB cradle’s [PHOTO] button.
• This starts the Photo
Stand slideshow with the images or image you specified.
[PHOTO]
Downloaded From camera-usermanual.com Casio Manuals
174
PLAYBACK
• Pressing [MENU] displays a screen for configuring slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or select “Start” and then press [SET].
• During audio playback, you can adjust volume by pressing [
왔] and then using [왖] and [왔].
4.
To stop the Phot Stand slideshow, press
[PHOTO] again.
IMPORTANT!
• The battery is not charged while a Photo Stand slideshow is in progress. To charge the battery, stop the slideshow.
Rotating the Display Image
Use the following procedure to rotate the image 90 degrees and register the rotation information along with the image.
After you do this, the image is always displayed in its rotated orientation.
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Rotation”, and then press [
왘].
• Note that this operation is possible only when a snapshot image is on the monitor screen.
3.
Use [
왗] and [왘] to scroll through images until
the one you want to rotate is on the monitor screen.
Downloaded From camera-usermanual.com Casio Manuals
175
PLAYBACK
4.
Use [
왖] and [왔] to
select “Rotate”, and then press [SET].
• Each press of [SET] rotates the image 90 degrees.
5.
After you are finished configuring settings, press [MENU] to exit the setting screen.
IMPORTANT!
• You cannot rotate an image that is protected. To rotate such an image, first unprotect it.
• You may not be able to rotate a digital image that was recorded with another type of digital camera.
• You cannot rotate the following types of images.
— Movie images and the voice recording file icon
— Zoomed images
— Images created with MOTION PRINT
• Image rotation is supported for single image only.
You cannot rotate a 9-image screen or an image on the calendar screen.
Downloaded From camera-usermanual.com Casio Manuals
176
PLAYBACK
Adding Audio to a Snapshot
The “after-recording” feature lets you add audio to snapshots after they are recorded. You can also re-record the audio of an audio snapshot (one with a icon on it).
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
• Recording Time:
Up to about 30 seconds per image
• Audio File Size:
Approximately 165KB (30-second recording of approximately 5.5KB per second)
1.
In the PLAY mode, use [
왗] and [왘] to scroll
through snapshots until the one to which you want to add audio is displayed.
2.
Press [MENU].
3.
Select the “PLAY” tab, select “Dubbing”, and then press [
왘].
4.
Press the shutter button to start audio recording.
5.
Recording stops after about 30 seconds or when you press the shutter button.
Downloaded From camera-usermanual.com Casio Manuals
177
PLAYBACK
To re-record audio
1.
In the PLAY mode, use [
왗] and [왘] to scroll
through snapshots until the one whose audio you want to re-record is displayed.
2.
Press [MENU].
3.
Select the “PLAY” tab, select “Dubbing”, and then press [
왘].
4.
Use [
왖] and [왔] to select “Delete”, and then
press [SET].
• If you merely want to delete the audio without rerecording, press [MENU] here to complete the procedure.
5.
Press the shutter button to start audio recording.
6.
Recording stops after about 30 seconds or when you press the shutter button.
• This deletes the existing audio and replaces it with the new one.
Downloaded From camera-usermanual.com Casio Manuals
178
IMPORTANT!
• Take care that you do not block the microphone with your fingers.
• Good recording results are not possible when the camera is too far
Microphone from the subject.
• The (Audio) icon appears on the monitor screen after audio recording is complete.
• You will not be able to record audio when remaining memory capacity is low.
• You cannot add audio to the following types of images.
— Movie images
— Images created with MOTION PRINT
— Protected snapshot (page 186)
• Audio that is re-recorded or deleted cannot be recovered. Make sure you no longer need audio before re-recording or deleting it.
PLAYBACK
Playing Back a Voice Recording File
Perform the following steps to play back a voice recording file.
1.
In the PLAY mode, use [
왗] and [왘] to display
the voice recording file (a file with on it) you want to play.
2.
Press [SET].
• This starts playback of the voice recording file through the camera’s speaker.
• You can perform the following operations while audio is playing.
To do this:
Fast forward or fast reverse the audio
Pause and unpause audio playback
Adjust audio volume
Toggle monitor screen indicators on and off
Cancel playback
Do this:
Hold down [
왗] or [왘].
Press [SET].
Press [
왔] and then use [왖] and [
왔].
Press [DISP].
Press [MENU].
IMPORTANT!
• Audio volume can be adjusted only when playback is being performed or is paused.
• If your recording has index marks (page 133) inside it, you can jump to the index mark before or after the current playback location by pausing playback and then pressing [
왗] or [왘]. Next, press [SET] to resume playback from the index mark position.
Downloaded From camera-usermanual.com Casio Manuals
179
PLAYBACK
Displaying Camera Images on a TV Screen
You can display recorded images on a TV screen. To display camera images on a TV, you need a television equipped with a video input terminal, USB cradle, and the
AV cable that comes with the camera.
1.
Connect one end of the AV cable that comes with the camera to the [AV OUT] port of the
USB cradle, and the other end to the video input terminal of the TV.
• Connect the yellow plug of the AV cable to the video input (yellow) terminal of the TV, and the white plug to the TV’s audio input (white) terminal.
TV
AV cable
Video input terminal [AV OUT] (AV output port)
2.
Turn off the camera.
3.
Set the camera onto the USB cradle.
4.
Turn on the TV and select its video input mode.
5.
Press [ ] to turn on the camera, and then perform the required operation for playback.
Downloaded From camera-usermanual.com Casio Manuals
180
PLAYBACK
IMPORTANT!
• Make sure that “Power On” or “Power On/Off” is selected for the camera’s power on/off functions
(page 201) when you connect to a TV to view images.
• All icons and indicators that appear on the monitor screen also appear on the TV screen.
• Note that the audio output is monaural.
• Pressing the USB cradle’s [PHOTO] button will activate the Photo Stand feature (page 174) and display images on the TV screen.
• Depending on the size of the TV screen, recorded images may not fill the entire screen.
• For video output, the audio volume level is initially set to maximum. Perform volume level adjustment using TV controls.
• After using an optionally available AV cable (EMC-
3A) to connect the camera’s USB cradle connector directly to the AUDIO IN terminal of a TV (without using the USB cable), you can view recorded images on the TV and even use the TV screen to compose images before recording them.
Selecting the Video Output System
You can select either NTSC or PAL for the video system to match the system of the TV you are using.
1.
In a REC mode or the PLAY mode, press
[MENU].
2.
Select the “Set Up” tab, select “Video Out”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
If you are using a TV designed for use in this area:
U.S., Japan, and other areas that use the NTSC system
Europe and other areas that use the PAL system
Select this setting:
NTSC
PAL
Downloaded From camera-usermanual.com Casio Manuals
181
PLAYBACK
IMPORTANT!
• Images will not display properly if you select the wrong video system.
• This camera supports the NTSC and PAL video systems only. Images will not display properly if you use a TV (monitor) that is designed for a different video system.
Downloaded From camera-usermanual.com Casio Manuals
182
DELETING FILES
DELETING FILES
You can delete a single file, or you can delete all files currently in memory.
IMPORTANT!
• Note that file deletion cannot be undone. Once you delete a file, it is gone. Make sure you really do not need a file anymore before you delete it. Especially when deleting all files, make sure you check all the files you have stored before proceeding.
• A protected file cannot be deleted. To delete a protected file, unprotect it first (page 186).
• Delete cannot be performed when all files in memory are protected (page 187).
• Deleting an audio snapshot deletes both the image file and the audio file attached to it.
• You cannot use the procedures in this section to delete images from the FAVORITE folder. See the procedures on page 190 for details about deleting
FAVORITE folder contents.
Deleting a Single File
1.
In the PLAY mode, press [
왔] ( ).
2.
Use [
왗] and [왘] to scroll through files and
display the one you want to delete.
3.
Use [
왖] and [왔] to select “Delete”.
• To exit the file delete operation without deleting anything, select “Cancel”.
4.
Press [SET] to delete the file.
• Repeat steps 2 through 4 to delete other files, if you want.
5.
Press [MENU] to exit the menu screen.
Downloaded From camera-usermanual.com Casio Manuals
183
DELETING FILES
Deleting All Files
1.
In the PLAY mode, press [
왔] ( ).
2.
Use [
왖] and [왔] to select “All Files Delete”,
and then press [SET].
3.
Use [
왖] and [왔] to select “Yes”.
• To exit the file delete operation without deleting anything, select “No”.
4.
Press [SET] to delete all the files.
• The message “There are no files.” appears on the screen after all of the files are deleted.
Downloaded From camera-usermanual.com Casio Manuals
184
FILE MANAGEMENT
FILE MANAGEMENT
The file management capabilities of the camera make it easy to keep track of images. You can protect files against deletion and store the files you want in the camera’s built-in memory.
Folders
Your camera automatically creates folders in its built-in memory or on the memory card.
Memory Folders and Files
An image you record is automatically stored in a folder, whose name is a serial number. You can have up to 900 folders in memory at the same time. Folder names are generated as shown below.
Example: Name of the 100th folder.
1 0 0 C A S I O
Serial number (3 digits)
Each folder can hold files numbered up to 9,999.
Trying to store the 10,000th file in a folder causes the next serially numbered folder to be created. File names are generated as shown below.
Example: Name of the 26th file
C I M G 0 0 2 6 . J P G
Extension
Serial number (4 digits)
• The folder and file names described here appear when you view folders and files on a computer. See page 32 for information about how the camera displays folder and file names.
• The actual number of files you will be able to store on a memory card depends on image size and quality, card capacity, etc.
• For details about the folder structure, see “Memory Folder
Structure” on page 235.
Downloaded From camera-usermanual.com Casio Manuals
185
FILE MANAGEMENT
Protecting Files
Once you protect a file it cannot be deleted (page 183).
You can protect files individually or you can protect all files in memory with a single operation.
IMPORTANT!
• Even if a file is protected, it still will be deleted by a memory card format operation (page 206) or a builtin memory format operation (page 202).
To protect a single file
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Protect”, and then press [
왘].
4.
Use [
왖] and [왔] to
select “On”, and then press [SET].
• A file that is protected is indicated by the mark.
• To unprotect a file, select
“Off” in step 4, and then press [SET].
5.
Press [MENU] to exit the menu screen.
3.
Use [
왗] and [왘] to scroll through files and
display the one you want to protect.
Downloaded From camera-usermanual.com Casio Manuals
186
FILE MANAGEMENT
To protect all files in memory
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Protect”, and then press [
왘].
3.
Use [
왖] and [왔] to select “All Files : On”, and
then press [SET].
• To unprotect all files, press [SET] in step 3 so the setting shows “All Files : Off”.
4.
Press [MENU] to exit the menu screen.
Using the FAVORITE Folder
You can copy photos of family members or other special shots from the file storage folder (page 235) to the
FAVORITE folder in built-in memory. Images copied to the
FAVORITE folder are automatically reduced to 320
× 240 pixels. Images in the FAVORITE folder are not displayed during normal playback, so it helps to keep your personal images private as you carry them around. FAVORITE folder images are not deleted when you change memory cards, so you can always keep them on hand.
To copy a file to the FAVORITE folder
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Favorites”, and then press [
왘].
Downloaded From camera-usermanual.com Casio Manuals
187
FILE MANAGEMENT
3.
Use [
왖] and [왔] to
select “Save”, and then press [SET].
• This displays the names of the files in built-in memory or on the loaded memory card.
4.
Use [
왗] and [왘] to select the file you want to
copy to the FAVORITE folder.
5.
Use [
왖] and [왔] to select “Save”, and then
press [SET].
• This copies the displayed file to the FAVORITE folder.
6.
After copying all of the files you want, use [
왖]
and [
왔] to select “Cancel”, and then press
[SET] to exit.
NOTE
• Copying an image file with the above procedure creates a 320
× 240-pixel QVGA-size image in the
FAVORITE folder.
• A file copied into the FAVORITE folder is automatically assigned a file name that is a serial number. Though the serial number starts from 0001 and can go as high as 9999, the actual upper end of the range depends on built-in memory capacity.
Remember that the maximum number of images that can be stored in built-in memory depends on the size of each image and other factors.
IMPORTANT!
• Note that an image that has been copied to the
FAVORITE folder and then resized cannot be returned to its original size.
• Files in the FAVORITE folder cannot be copied to a memory card.
Downloaded From camera-usermanual.com Casio Manuals
188
FILE MANAGEMENT
To display a file in the FAVORITE folder
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Favorites”, and then press [
왘].
3.
Use [
왖] and [왔] to select “Show”, and then
press [SET].
• If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
4.
Use [
왘] (forward) and
[
왗] (back) to scroll
through the files in the
FAVORITE folder.
File Name
IMPORTANT!
• Note that a FAVORITE folder is created in the camera’s built-in memory only. No FAVORITE folder is created on a memory card when you use one. If you want to view the contents of the FAVORITE folder on your computer screen, you need to remove the memory card from the camera (if you are using one) before placing the camera onto the USB cradle to start data communication (pages 205, 220).
FAVORITE folder icon
5.
After you are finished viewing files, press
[MENU] twice to exit.
Downloaded From camera-usermanual.com Casio Manuals
189
FILE MANAGEMENT
To delete a file from the FAVORITE folder
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Favorites”, and then press [
왘].
3.
Use [
왖] and [왔] to select “Show”, and then
press [SET].
4.
Press [
왔] ( ).
5.
Use [
왗] and [왘] to select the file you want to
delete from the FAVORITE folder.
6.
Use [
왖] and [왔] to select “Delete”, and then
press [SET].
• To exit the file delete operation without deleting anything, select “Cancel”.
7.
After deleting all of the files you want, use [
왖]
and [
왔] to select “Cancel”, and then press
[SET] to exit.
To delete all files from the FAVORITE folder
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “Favorites”, and then press [
왘].
3.
Use [
왖] and [왔] to select “Show”, and then
press [SET].
4.
Press [
왔] ( ).
5.
Use [
왖] and [왔] to select “All Files Delete”,
and then press [SET].
IMPORTANT!
• You cannot use the delete operations on page 183 to delete images from the FAVORITE folder.
Performing the memory format operation (page 202), however, does delete FAVORITE folder files.
Downloaded From camera-usermanual.com Casio Manuals
190
OTHER SETTINGS
OTHER SETTINGS
Configuring Sound Settings
You can configure different sounds to play whenever you turn on the camera, press the shutter button half-way or all the way, or perform a key operation.
To configure sound settings
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Sounds”, and then press [
왘].
3.
Use [
왖] and [왔] to select the sound whose
setting you want to configure, and then press
[
왘].
4.
Use [
왖] and [왔] to change the setting, and
then press [SET].
To do this:
Select a built-in sound
Turn off the sound
Select this setting:
Sound 1 through Sound 5
Off
To set the confirmation tone volume level
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Sounds”, and then press [
왘].
3.
Use [
왖] and [왔] to select “
Operation”.
4.
Use [
왗] and [왘] to specify the volume setting
you want, and then press [SET].
• You can set the volume in the range of 0 (no sound) to 7 (loudest).
IMPORTANT!
• The volume setting you make here also affects the video output volume level (page 180).
Downloaded From camera-usermanual.com Casio Manuals
191
OTHER SETTINGS
To set the audio volume level for movie and audio snapshot playback
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Sounds”, and then press [
왘].
3.
Use [
왖] and [왔] to select “
Play”.
4.
Use [
왗] and [왘] to specify the playback
volume setting you want, and then press
[SET].
• You can set the playback volume in the range of 0
(no sound) to 7 (loudest).
IMPORTANT!
• The volume setting you make here does not affect the video output volume level (page 180).
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup screen image, which causes it to appear on the monitor screen whenever you press the power button or [ ]
(REC) to turn on the camera. The startup screen image does not appear if you press [ ] (PLAY) to turn on the camera.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Startup”, and then press [
왘].
3.
Use [
왗] and [왘] to display the image you want
to use as the startup image.
4.
Use [
왖] and [왔] to change the setting, and
then press [SET].
To do this:
Use the currently displayed image as the startup screen image
Disable the startup screen
Select this setting:
On
Off
Downloaded From camera-usermanual.com Casio Manuals
192
OTHER SETTINGS
IMPORTANT!
• You can select any one of the following types of image as the startup image.
— The camera’s built-in image
— A snapshot
— The image only of an audio snapshot
• Only one image can be stored in startup image memory at one time. Selecting a new startup image overwrites anything that is already stored in startup image memory. Because of this, if you want to return to a previous startup image, you need to have a separate copy of that image in the camera’s standard image memory.
• The startup image is deleted if you format built-in memory (page 202).
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for generating the serial number used for file names (page 185).
1.
Press [MENU].
2.
Select the “Set Up” tab, select “File No.”, and then press [
왘].
3.
Use [
왖] and [왔] to change the setting, and
then press [SET].
To do this for a newly saved file:
Store the last file number used and increment it, regardless of whether files are deleted or whether the memory card is replaced with a new one
Restart the serial number from 0001 whenever all files are deleted or the memory card is replaced.
Select this setting:
Continue
Reset
Downloaded From camera-usermanual.com Casio Manuals
193
OTHER SETTINGS
Setting the Clock
Use the procedures in this section to select a Home Time
Zone, and to change its date and time settings. If you want to change the time and date setting only without changing the Home Time Zone, perform the procedure under “To set the current time and date” (page 195) only.
IMPORTANT!
• Make sure you select your Home Time zone (the zone where you are currently located) before changing the time and date settings. Otherwise, the time and date setting will change automatically when you select another time zone.
To select your Home Time zone
1.
Press [MENU].
2.
Select the “Set Up” tab, select “World Time”, and then press [
왘].
• This displays the current World Time zone.
3.
Use [
왖] and [왔] to select “Home”, and then
press [
왘].
4.
Use [
왖] and [왔] to select “City”, and then
press [
왘].
5.
Use [
왖], [왔], [왗], and [왘] to select the
geographical area that contains location you want to select as your Home Time zone, and then press [SET].
6.
Use [
왖] and [왔] to select the city you want,
and then press [SET].
7.
After selecting the city you want, press [SET] to register its zone as your Home Time zone.
Downloaded From camera-usermanual.com Casio Manuals
194
OTHER SETTINGS
To set the current time and date
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Adjust”, and then press [
왘].
3.
Set the current date and the time.
To do this:
Change the setting at the current cursor location
Move the cursor between settings
Toggle between 12-hour and 24hour timekeeping
Do this:
Press [
왖] or [왔].
Press [
왗] or [왘].
Press [DISP].
4.
When all the settings are the way you want, press [SET] to register them and exit the setting screen.
Changing the Date Format
You can select from among three different formats for display of the date.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Date Style”, and then press [
왘].
3.
Use [
왖] and [왔] to change the setting, and
then press [SET].
Example: December 24, 2006
To display the date like this:
06/12/24
24/12/06
12/24/06
Select this format:
YY/MM/DD
DD/MM/YY
MM/DD/YY
Downloaded From camera-usermanual.com Casio Manuals
195
OTHER SETTINGS
Using World Time
You can use the World Time screen to select a time zone and instantly change the time setting of the camera’s clock when you go on a trip, etc. World Time lets you select one of 162 cities in 32 time zones.
To display the World Time screen
1.
Press [MENU].
2.
Select the “Set Up” tab, select “World Time”, and then press [
왘].
3.
Use [
왖] and [왔] to select “World”.
To do this:
Display the time in your home time zone
Display the time in the zone currently selected on the World Time screen
Select this:
Home
World
4.
Press [SET] to exit the setting screen.
To configure World Time settings
1.
Press [MENU].
2.
Select the “Set Up” tab, select “World Time”, and then press [
왘].
3.
Use [
왖] and [왔] to select “World”, and then
press [
왘].
4.
Use [
왖] and [왔] to
select “City”, and then press [
왘].
• To configure the summer time setting, select
“DST”, and then select either “On” or “Off”.
• Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months.
• Use of summer time depends on the local customs and laws.
Downloaded From camera-usermanual.com Casio Manuals
196
OTHER SETTINGS
5.
Use [
왖], [왔], [왗], and
[
왘] to select the
geographical area you want, and then press
[SET].
6.
Use [
왖] and [왔] to select the city you want,
and then press [SET].
7.
When the setting is the way you want, press
[SET] to apply it and exit the setting screen.
Editing the Date and Time of an Image
Use the procedure in this section to change the date and time of a previously recorded image. This capability comes in handy when the current date and time are wrong due to the following reasons.
• Because the camera’s clock settings were not configured correctly when the image was recorded (page 51)
• Because the image was recorded using the wrong World
Time zone (page 196)
1.
In the PLAY mode, use [
왗] and [왘] to display
the image whose date and time you want to edit.
2.
Press [MENU].
3.
Select the “PLAY” tab, select “Date/Time”, and then press [
왘].
4.
Set the date and the time you want.
Downloaded From camera-usermanual.com Casio Manuals
197
OTHER SETTINGS
To do this:
Change the value at the cursor location
Move the cursor between settings
Toggle between 12-hour and 24hour timekeeping
Do this:
Press [
왖] or [왔].
Press [
왗] or [왘].
Press [DISP].
5.
When all the settings are the way you want, press [SET] to apply them.
• After editing the time and date, display the image to confirm that the date and time are correct.
IMPORTANT!
• You cannot change the date of the following types of files.
— Movies, Voice recordings
— Images created with MOTION PRINT
• The date and time stamped into an image using the
Time Stamp feature cannot be edited (page 147).
• You cannot edit the date and time of a image that is protected. Unprotect the image and then edit the date and time.
• You can specify any date in the range of January 1,
1980 to December 31, 2049.
Downloaded From camera-usermanual.com Casio Manuals
198
Changing the Display Language
You can use the following procedure to select one of ten languages as the display language.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Language”, and then press [
왘].
3.
Use [
왖], [왔], [왗], and [왘] to change the
setting, and then press [SET].
OTHER SETTINGS
Changing the Brightness of the Monitor
Screen
You can use the following procedure to change the brightness of the monitor screen.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Screen”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
When you want to do this:
Automatic adjustment of monitor screen brightness in accordance with lighting conditions.
• Auto 2 adjusts to a brighter setting more quickly than Auto 1.
• In the PLAY mode, monitor screen brightness is fixed, regardless of current lighting conditions.
Higher monitor screen brightness than the +1 setting
• This setting consumes more power.
Relatively higher monitor screen brightness than the 0 setting (for outdoor use)
• This setting consumes more power.
Normal monitor screen brightness (for indoor use)
Select this setting:
Auto 1 or Auto 2
+2
+1
0
Downloaded From camera-usermanual.com Casio Manuals
199
OTHER SETTINGS
Changing the USB Port Protocol
You can use the procedure below to change the communication protocol of the camera’s USB port when connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are connecting.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “USB”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
When connecting to this type of device:
Computer or USB DIRECT-
PRINT-compatible printer (page
214)
PictBridge-compatible printer
(page 214)
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)*
* “PTP” stands for “Picture Transfer Protocol”.
• Mass Storage (USB DIRECT-PRINT) causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image data to the connected device.
Downloaded From camera-usermanual.com Casio Manuals
200
OTHER SETTINGS
Configuring [ ] (REC) and [ ] (PLAY)
Power On/Off Functions
You can use the following procedures to configure [ ]
(REC) and [ ] (PLAY) so power turns on and/or off whenever they are pressed.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “REC/PLAY”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
To configure this operation:
Power turns on when [ ] (REC) or
[ ] (PLAY) is pressed (but does not turn off)
Power turns on or off when [ ]
(REC) or [ ] (PLAY) is pressed
Power does not turn on or off when
[ ] (REC) or [ ] (PLAY) is pressed
Select this setting:
Power On
Power On/Off
Disable
IMPORTANT!
• When “Power On/Off” is selected, pressing [ ]
(REC) in a REC mode or [ ] (PLAY) in the PLAY mode turns off the camera.
• Pressing [ ] (REC) in the PLAY mode switches to the currently selected recording mode, and pressing
[ ] (PLAY) in a REC mode switches to the PLAY mode.
• When connecting the camera to a TV for viewing camera images, “Power On” or “Power On/Off” must be selected for the power on/off function.
NOTE
• The initial default setting is “Power On”.
Downloaded From camera-usermanual.com Casio Manuals
201
OTHER SETTINGS
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot be recovered. Check to make sure you do not need any of the data in memory before you format it.
• Formatting built-in memory deletes the following.
— Protected images
— FAVORITE folder images
— BEST SHOT mode user setups
— Startup screen image
• Before starting the format operation, check to make sure that the camera’s battery is not low. Battery power going low during formatting can cause improper formatting and creates the risk of camera malfunction.
• Never open the battery cover while the format operation is being performed. Doing so creates the risk of camera malfunction.
1.
Check to make sure there is no memory card loaded in the camera.
• If there is a memory card loaded in the camera, remove it (page 205).
2.
Press [MENU].
3.
Select the “Set Up” tab, select “Format”, and then press [
왘].
4.
Use [
왖] and [왔] to select “Format”, and then
press [SET]. Entering the PLAY mode after formatting built-in memory will cause the message “There are no files.” to appear.
• To exit the format operation without formatting, select “Cancel”.
Downloaded From camera-usermanual.com Casio Manuals
202
USING A MEMORY CARD
USING A MEMORY CARD
You can expand the storage capabilities of your camera by using a commercially available memory card (SD memory card or
MultiMediaCard). You can also copy files from built-in memory to a memory card and from a built-in memory card to built-in memory.
• Normally, files are stored in built-in memory. When you insert a memory card, however, the camera automatically stores files to the card.
• Note that you cannot save files to built-in memory while a memory card is installed in the camera.
IMPORTANT!
• Use only an SD memory card or a MultiMediaCard with this camera. Proper operation is not guaranteed when any other type of card is used.
• See the instructions that come with the memory card for information about how to use it.
• Certain types of cards can slow down processing speeds. If you are using a slow memory card, you may not be able to record a movie using the “HQ” image quality setting. Because of this, use of an SD memory card with a maximum transfer speed of at least 10MB per second is recommended.
• Certain types of memory cards take longer to record data, which can cause movie frames to be dropped.
and
REC
flash on the monitor screen during recording to let you know when a frame has been dropped. Use of an SD memory card with a maximum transfer speed of at least 10MB per second is recommended.
• SD memory cards have a write protect switch, which you can use to protect against accidental deletion of image data. Note, however, if you write protect an
SD memory card, you must remove write protection whenever you want to record to it, format it, or delete any of its files.
• Electrostatic charge, digital noise, and other phenomena can cause data to become corrupted or even lost. Always maintain backup copies of important data on other media (CD-R, CD-RW, MO disc, computer hard disk, etc.)
Downloaded From camera-usermanual.com Casio Manuals
203
USING A MEMORY CARD
Using a Memory Card
IMPORTANT!
• Make sure you turn off the camera before inserting or removing a memory card.
• Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the slot when you feel resistance.
To insert a memory card into the camera
1.
Slide the battery cover in the direction indicated by the arrow, and then swing it open.
2.
Positioning the memory card so its front is facing in the same direction as the camera’s monitor screen, carefully slide it into the card slot. Slide the card all the way in until you hear it click securely into place.
3.
Swing the battery cover closed, and then slide it in the direction indicated by the arrow.
Front Back
Downloaded From camera-usermanual.com Casio Manuals
204
USING A MEMORY CARD
To replace the memory card
1.
Press the memory card into the camera and then release it. This will cause the card to come part way out of the camera.
2.
Pull the memory card out of the slot.
3.
Load another memory card.
IMPORTANT!
• Never try to insert anything that is not an SD memory card or MMC (MultiMediaCard) into the camera’s memory card slot. Doing so can cause malfunction of the camera.
• Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your dealer or nearest
CASIO authorized service center.
• Never remove a card from the camera while the green operation lamp is flashing. Doing so can cause the file save operation to fail, and even damage the memory card.
• Certain types of memory cards or camera conditions can cause the format operation to take considerable time.
Downloaded From camera-usermanual.com Casio Manuals
205
USING A MEMORY CARD
Formatting a Memory Card
Formatting a memory card deletes any data already stored on it.
IMPORTANT!
• Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then using it in the camera can slow down data processing by the camera. In the case of an SD card, formatting on a computer can result in nonconformity with the SD format, causing problems with compatibility, operation, etc.
• Note that data deleted by a memory card format operation cannot be recovered. Check to make sure you do not need any of the data on the memory card before you format it.
• Formatting a memory card that contains files deletes all the files, even those that are protected (page
186).
■ To format a memory card
1.
Load the memory card into the camera.
2.
Turn on the camera, and press [MENU].
3.
Select the “Set Up” tab, select “Format”, and then press [
왘].
4.
Use [
왖] and [왔] to select “Format”, and then
press [SET]. Entering the PLAY mode after formatting the memory card will cause the message “There are no files.” to appear.
• To exit the format operation without formatting, select “Cancel”.
Downloaded From camera-usermanual.com Casio Manuals
206
USING A MEMORY CARD
■ Memory Card Precautions
• If a memory card starts to behave abnormally, you can restore normal operation by reformatting it. However, we recommend that you always take along more than one memory card whenever using the camera far away from the home or office.
• We recommend that you format a memory card before using it for the first time after purchasing it, or whenever the card you are using seems to be the cause of abnormal images.
• As you record data to and delete data from an SD memory card a number of times, it loses its ability to retain data. Because of this, periodic re-formatting of an
SD memory card is recommended.
• Before starting the format operation, check to make sure that the camera’s battery is not low. Battery power going low during formatting can cause improper formatting and creates the risk of memory card malfunction.
• Never open the battery cover while the format operation is being performed. Doing so creates the risk of memory card malfunction.
Copying Files
Use the procedures below to copy files between built-in memory and a memory card.
IMPORTANT!
• Only snapshot, movie, audio snapshot, and voice recording files recorded with this camera can be copied. Other files cannot be copied.
• Files in the FAVORITE folder cannot be copied.
• Copying an audio snapshot copies both its image file and the audio file.
Downloaded From camera-usermanual.com Casio Manuals
207
USING A MEMORY CARD
To copy all the files in built-in memory to a memory card
1.
Load the memory card into the camera.
2.
Turn on the camera. Next, enter the PLAY mode and press [MENU].
3.
Select the “PLAY” tab, select “Copy”, and then press [
왘].
IMPORTANT!
• Copy is not possible if there is not enough memory capacity to hold all of the images you are trying to copy.
4.
Use [
왖] and [왔] to select “Built-in Card”,
and then press [SET].
• This starts the copy operation and displays the message “Busy.... Please wait...”.
• After the copy operation is complete, the monitor screen shows the last file in the folder.
Downloaded From camera-usermanual.com Casio Manuals
208
USING A MEMORY CARD
To copy a specific file from a memory card to built-in memory
1.
Perform steps 1 through 3 of the procedure under “To copy all the files in built-in memory to a memory card”.
2.
Use [
왖] and [왔] to select “Card Built-in”,
and then press [SET].
3.
Use [
왗] and [왘] to select the file you want to
copy.
4.
Use [
왖] and [왔] to select “Copy”, and then
press [SET].
• This starts the copy operation and displays the message “Busy.... Please wait...”.
• The file reappears on the monitor screen after the copy operation is complete.
• Repeat steps 3 through 4 to copy other images, if you want.
5.
Press [MENU] to exit the copy operation.
Downloaded From camera-usermanual.com Casio Manuals
209
NOTE
• Files are copied to the folder in built-in memory whose name has the largest number.
PRINTING IMAGES
PRINTING IMAGES
A digital camera provides you with a variety of different ways to print the images it records. The three main printing methods are described below. Use the method that best suits your needs.
■ Professional Print Service
The camera’s DPOF feature lets you specify which images you want to print and how many copies of each you want.
For more information, see “DPOF” (page 211).
NOTE
• Certain print service providers may not support
DPOF or may support different printing protocols. In this case, use the protocol supported by your print service to specify the images you want to have printed.
■ Printing Directly on a Printer Equipped with
a Card Slot, or a Printer that Supports USB
DIRECT-PRINT or PictBridge
After using the camera’s DPOF feature to specify the images you want to print and how many copies of each should be printed, you can plug the memory card into a printer equipped with a card slot, or connect the camera to a PictBridge or USB DIRECT-PRINT printer for printing.
For more information, see “DPOF” (page 211) and “Using
PictBridge or USB DIRECT-PRINT” (page 214).
Downloaded From camera-usermanual.com Casio Manuals
210
PRINTING IMAGES
■ Printing with a Computer
Windows Users
The camera comes bundled with Photo Loader and
Photohands applications, which can be installed on a
Windows computer for image transfer, management, and printing. For more information, see “Using the Camera with a Windows Computer” (pages 220, 238).
Macintosh Users
The camera comes bundled with Photo Loader for the
Macintosh, which can be installed for image transfer and management, but not for printing. Use commercially available software for printing with a Macintosh. For more information, see “Using the Camera with a Macintosh
Computer” (pages 228, 253).
DPOF
The letters “DPOF” stand for “Digital Print
Order Format”, which is a format for recording on a memory card or other medium which digital camera images should be printed and how many copies of the image should be printed. Then you can print on a
DPOF-compatible printer or at a professional print service in accordance with the file name and number of copies settings recorded on the card.
With this camera, you can select images by viewing them on the monitor screen without needing to remember file names, their locations in memory, etc.
■ DPOF Settings
File Name, number of copies, date
Downloaded From camera-usermanual.com Casio Manuals
211
PRINTING IMAGES
To configure print settings for a single image
1.
3.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “DPOF”, and then press [
왘].
Use [
4.
Use [
왗] and [왘] to
display the image you want.
왖] and [왔] to select “Select images”,
and then press [
왘].
Downloaded From camera-usermanual.com Casio Manuals
212
5.
Use [
왖] and [왔] to specify the number of
copies.
• You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image printed.
6.
To turn on date stamping for the prints, press [DISP] so
“On” is displayed.
• “On” indicates that date stamping is turned on.
• Turning on date stamping while “00” is specified for the number of copies will cause the number of copies to change to “01”. Any other number of copies setting will remain the same when you turn on date stamping.
• To turn off date stamping for the prints, press [DISP] so “Off” is displayed.
• Repeat steps 4 through 6 if you want to configure other images for printing.
7.
After all the settings are the way you want, press [SET] to apply them.
PRINTING IMAGES
To configure print settings for all images
1.
In the PLAY mode, press [MENU].
2.
Select the “PLAY” tab, select “DPOF”, and then press [
왘].
3.
Use [
왖] and [왔] to select “All images”, and
then press [
왘].
4.
Use [
왖] and [왔] to
specify the number of copies.
• You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image printed.
5.
To turn on date stamping for the prints, press
[DISP] so “On” is displayed.
• “On” indicates that date stamping is turned on.
• Turning on date stamping while “00” is specified for the number of copies will cause the number of copies to change to “01”. Any other number of copies setting will remain the same when you turn on date stamping.
• To turn off date stamping for the prints, press [DISP] so “Off” is displayed.
6.
After all the settings are the way you want, press [SET] to apply them.
IMPORTANT!
• DPOF settings are not cleared automatically after printing is complete. This means that if you perform another printing operation without clearing DPOF settings, printing will be performed in accordance with the last settings you configured. If you want to prevent this from happening, perform the procedure under “To configure print settings for all images” and change the number of copies to “00”. After that, you can configure new DPOF settings as required.
Downloaded From camera-usermanual.com Casio Manuals
213
PRINTING IMAGES
• If you take a memory card to a professional print service, be sure to tell them that it includes DPOF settings for the images to be printed and the number of copies. If you don’t, the printing service may print all images without regard to your DPOF settings, or date printing may not be performed.
• Note that some professional print services do not support DPOF printing. Check with your service before ordering prints.
• Some printers may have settings that disable date stamp and/or DPOF printing. See the user documentation that comes with your printer for details about how to enable these features.
• If you use the DPOF setting to turn on date stamping for printing on an image that already has date/time stamp data embedded in it (page 147), the two stamps will be superimposed. Because of this, do not turn on DPOF date stamping if an image already has a date/time stamp embedded on it.
Using PictBridge or USB DIRECT-PRINT
You can connect the camera directly to a printer that supports
PictBridge or USB DIRECT-PRINT, and perform image selection and printing using the camera monitor screen and controls. DPOF support
(page 211) also lets you specify which images you want to print and how many copies of each should be printed.
• PictBridge is a standard established by the Camera and
Imaging Products Association
(CIPA).
• USB DIRECT-PRINT is a standard proposed by Seiko
Epson Corporation.
Downloaded From camera-usermanual.com Casio Manuals
214
PRINTING IMAGES
1.
Press [MENU].
2.
Select the “Set Up” tab, select “USB”, and then press [
왘].
3.
Use [
왖] and [왔] to select the setting you
want, and then press [SET].
When connecting to this type of device:
Computer or USB DIRECT-
PRINT-compatible printer
PictBridge-compatible printer
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)
• Mass Storage (USB DIRECT-PRINT) causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image data to the connected device.
4.
Connect the USB cable that comes bundled with the camera to the USB cradle and a printer.
USB port
USB cable
(bundled)
Connector B
Connector A
[ ] (USB port)
• Also, connect the AC adaptor to the USB cradle and plug the AC adaptor into an electrical outlet.
• If you are using battery power without the AC adaptor, make sure that the battery is fully charged.
• Nothing appears on the camera’s monitor screen if the camera is on the USB cradle while the bundled
AV cable is connected to the cradle. Be sure to disconnect the AV cable from the cradle if you want to use the camera’s monitor screen to view images.
Downloaded From camera-usermanual.com Casio Manuals
215
PRINTING IMAGES
5.
Turn off the camera, and then set the camera on the USB cradle.
6.
Turn on the printer.
7.
Load paper for printing the images into the printer.
8.
Press the USB cradle’s [USB] button.
• This displays the print menu on the camera’s monitor screen.
9.
Use [
왖] and [왔] to select “Paper Size”, and
then press [
왘].
10 .
Use [
왖] and [왔] to select the paper size you
want to use for printing, and then press [SET].
• The following are the print sizes that are available.
3.5˝
× 5˝
5˝
× 7˝
4˝
× 6˝
A4
8.5˝
× 11˝
By Printer
• Selecting “By Printer” prints using the paper size selected on the printer.
• Available paper size settings depend on the connected printer. For full details, see the instructions that come with your printer.
Downloaded From camera-usermanual.com Casio Manuals
216
PRINTING IMAGES
11 .
Use [
왖] and [왔] to
specify the print option you want.
• To print a single image:
Select “1 Image” and then press [SET]. Next, use
[
왗] and [왘] to select the image you want to print.
• To print multiple images or all images: Select “DPOF
Printing”, and then press [SET]. Selecting this option will print the images selected with the DPOF settings.
See page 212 for more information.
• You can toggle date stamping of the image on and off by pressing [DISP]. The date stamp will be printed when “On” is indicated on the monitor screen.
“On” indicates that date stamping is turned on.
12 .
On the camera’s monitor screen, use [
왖] and
[
왔] to select “Print”, and then press [SET].
• This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any of the camera’s buttons while printing is in progress will cause the message to reappear.
• The print menu will appear when printing is complete.
• If you selected “1 Image” in step 11, you can select another image for printing and then repeat this step to print.
13 .
After you are finished printing, press the USB cradle’s [USB] button, and then turn off the camera.
Downloaded From camera-usermanual.com Casio Manuals
217
PRINTING IMAGES
Date Printing
Any one of the procedures described below can be used to include the recording date in image prints. Correct date printing requires that the current date be set on the camera before the image is recorded.
• Before recording the image, turn on date stamping
(“Date” or “Date&Time”) (page 147).
• Specifying date printing with DPOF settings (page 212)
— If you use the DPOF setting to turn on date stamping for printing on an image that already has date/time stamp data embedded in it (page 147), the two stamps will be superimposed. Because of this, do not turn on
DPOF date stamping if an image already has a date/ time stamp embedded on it.
— Some printers may have settings that disable time stamp and/or DPOF printing. See the user documentation that comes with your printer for details about how to enable these features.
— Note that some professional print services do not support DPOF printing. Check with your service before ordering prints.
• Specifying date printing with the Photohands software that comes with the camera
— See page 23 of the Photohands User’s Guide for details. The Photohands User’s Guide is provided as a
PDF file on the CD-ROM that comes bundled with your camera.
Downloaded From camera-usermanual.com Casio Manuals
218
• Specifying date printing when having printing done by a print service
— Some print services do not support date printing.
Check with your service for more information.
■ Printing Precautions
• See the documentation that comes with your printer for information about print quality and paper settings.
• Contact your printer manufacturer for information about models that support PictBridge and USB DIRECT-PRINT, upgrades, etc.
• Never disconnect the USB cable, or perform any camera or USB cradle operation while printing is in progress.
Doing so causes a printer error.
PRINTING IMAGES
PRINT Image Matching
III
Images include PRINT Image Matching
III data (mode setting and other camera setup information). A printer that supports PRINT Image Matching
III reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them.
* Seiko Epson Corporation holds the copyright for PRINT Image Matching and
PRINT Image Matching
III
.
Downloaded From camera-usermanual.com Casio Manuals
219
Exif Print
Exif Print is an internationally supported, open standard file format that makes it possible to capture and display vibrant digital images with accurate colors. With Exif 2.2, files include a wide range of shooting condition information that can be interpreted by an Exif Print printer to produce betterlooking prints.
IMPORTANT!
• Information about the availability of Exif Print compatible printer models can be obtained from each printer manufacturer.
VIEWING IMAGES ON A COMPUTER
VIEWING IMAGES ON A COMPUTER
After using the USB cradle to establish a USB connection between the camera and your computer, you can use your computer to view images in file memory and copy images to your computer’s hard disk or other storage media. In order to do this, you first need to install the USB driver located on the CD-ROM that comes bundled with the camera onto your computer.
Note that the procedure you need to perform depends on whether you are using computer running under Windows
(see below) or a Macintosh (see page 228).
Using the Camera with a Windows
Computer
The following are the general steps for viewing and copying files from a computer running under Windows. You can find details about each operation in the procedures that follow below. Note that you should also refer to the documentation that comes with your computer for other information about USB connections, etc.
1. If you are running Windows 98SE or 98, install the
USB driver onto your computer.
• You need to perform this step only once, the first time you connect to your computer.
• If you are running Windows XP, 2000, or Me, you do not need to install the USB driver.
2. Use the USB cradle to establish a connection between the camera and computer.
3. View and copy the images you want.
Downloaded From camera-usermanual.com Casio Manuals
220
VIEWING IMAGES ON A COMPUTER
IMPORTANT!
• Low battery power can cause the camera to power down suddenly during data communication. Use of the special AC adaptor is recommended to power the camera during data communication.
• If you are using battery power without the AC adaptor, make sure that the battery is fully charged.
• If you want to transfer files from the camera’s built-in memory to a computer, make sure there is no memory card loaded in the camera before you place it onto the USB cradle.
• This camera supports USB 2.0 Hi-Speed protocol.
Though it can be used with a computer that supports only USB 1.1 protocol, higher speed data transfer becomes possible when USB 2.0 Hi-Speed is supported. Note that certain computer models, connecting through a USB hub, and other system conditions can slow down data transfer and even cause operational problems.
Do not try to establish a connection between the camera and computer before installing the USB driver onto the computer. If you do, the computer will not be able to recognize the camera.
• USB driver installation is required in the case of
Windows 98SE and 98. Do not connect the camera to a computer running one of the above operating systems without installing the USB driver first.
• USB driver installation is not required in the case of
Windows XP, 2000, and Me.
Downloaded From camera-usermanual.com Casio Manuals
221
VIEWING IMAGES ON A COMPUTER
1.
What you should do first depends on whether your computer is running under Windows XP,
2000, Me, 98SE, or 98.
Windows 98SE/98 Users
• Start from step 2 to install the USB driver.
• Note that the example installation presented here uses Windows 98.
Windows XP/2000/Me Users
• Installation of the USB driver is not required, so jump directly to step 6.
2.
Set the bundled CD-ROM into the CD-ROM drive of your computer.
• Use the CD-ROM whose contents label shows “USB driver”.
3.
On the menu screen that appears, click
“English”.
4.
Click [USB driver B] and then [Install].
• This starts installation.
• Follow the instructions that appear on your computer screen to complete the installation.
• The following steps show installation under the
English version of Windows.
Downloaded From camera-usermanual.com Casio Manuals
222
VIEWING IMAGES ON A COMPUTER
5.
When the final setup screen appears, click the
[Exit] button on the CD-ROM menu to exit the menu, and then remove the CD-ROM from your computer.
• With some computer operating systems, a message prompting you to restart your computer may appear.
If this happens, restart your computer. The CD-ROM menu will appear again after your computer restarts.
Click the [Exit] button on the CD-ROM menu to exit the menu, and then remove the CD-ROM from your computer.
6.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then plug it in to a household power outlet.
• If you are using battery power without the AC adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on the area where you purchased the camera.
[DC IN 5.3V]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
[DC IN 5.3V]
Downloaded From camera-usermanual.com Casio Manuals
223
VIEWING IMAGES ON A COMPUTER
7.
Connect the USB cable that comes bundled with the camera to the USB cradle and your computer’s USB port.
USB port
USB cable
(bundled)
Connector B
Connector A
[ ] (USB port)
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as far as they will go. Proper operation is not possible if connections are not correct.
8.
Press the camera’s power button to turn it on, and then press its [MENU] button.
9.
Select the “Set Up” tab, select “USB”, and then press [
왘].
10.
Use [
왖] and [왔] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
11.
Turn off the camera.
Downloaded From camera-usermanual.com Casio Manuals
224
VIEWING IMAGES ON A COMPUTER
12.
Place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it is turned on.
• Pressing the [USB] button enters the USB mode, which causes the USB cradle’s [USB] lamp to light green (page 264).
• At this point, some operating systems will display a
“Removable Disk” dialog box. If your operating system does, close the dialog box.
13.
Press the USB cradle’s [USB] button.
• This will cause your computer to create a hardware profile for camera’s built-in memory or the memory card loaded in the camera. You do not need to install the USB driver every time. After you install it once, your computer will recognize the camera’s built-in memory or its memory card when you establish a
USB connection between the camera and your computer.
Downloaded From camera-usermanual.com Casio Manuals
225
[USB] lamp
[USB] button
VIEWING IMAGES ON A COMPUTER
14.
On your computer, double-click “My
Computer”.
• If you are running Windows XP, click [Start] and then
[My Computer].
15.
Double-click “Removable Disk”.
• Your computer sees the camera’s file memory as a removable disk.
16.
Double-click the “DCIM” folder.
17.
Double-click the folder that contains the image you want.
18.
Double-click the file that contains the image you want to view.
• For information about file names, see “Memory
Folder Structure” on page 235.
NOTE
• If you open a rotated image on your computer, the original unrotated version will appear (page 175).
This is true both for a rotated image opened from camera memory and for a rotated image that has been copied to your computer’s hard disk.
Downloaded From camera-usermanual.com Casio Manuals
226
19.
Depending on your operating system, perform one of the following procedures to save the files, if you want.
Windows 2000, Me, 98SE, 98
1. In the camera’s file memory (Removable Disk), rightclick the “DCIM” folder.
2. On the shortcut menu that appears, click [Copy].
3. Double click [My Documents] to open it.
4. On the My Documents [Edit] menu, click [Paste].
• This copies the “DCIM” folder (which contains the image files) to your “My Documents” folder.
Windows XP
1. In the camera’s file memory (Removable Disk), rightclick the “DCIM” folder.
2. On the shortcut menu that appears, click [Copy].
3. Click [Start] and then [My Documents].
4. On the My Documents [Edit] menu, click [Paste].
• This copies the “DCIM” folder (which contains the image files) to your “My Documents” folder.
VIEWING IMAGES ON A COMPUTER
NOTE
• If you already have a folder named “DCIM” in your computer’s “My Documents” folder, performing the procedures under step 19 above will overwrite the existing “DCIM” folder with the newly saved folder. If you want to save the contents of the existing “DCIM” folder, change its name or move it to another location before saving a new “DCIM” folder.
IMPORTANT!
• Never use your computer to edit, delete, move, or rename images stored in the camera’s file memory.
Doing so can cause problems with the image management data used by the camera, which may make it impossible to display images on the camera or it may cause large error in the number of images value displayed by the camera. Always copy images to your computer before performing any edit, delete, move, or rename operation.
20.
Depending on the version of Windows you are running, use one of the following procedures to terminate the USB connection.
Windows XP/98SE/98 Users
• After pressing the USB cradle’s [USB] button and making sure that the [USB] lamp is not lit, remove the camera from the USB cradle.
Windows 2000/Me Users
• Click card services in the task tray on your computer screen, and disable the drive number assigned to the camera. After pressing the USB cradle’s [USB] button and making sure that the [USB] lamp is not lit, remove the camera from the USB cradle.
Downloaded From camera-usermanual.com Casio Manuals
227
VIEWING IMAGES ON A COMPUTER
■ USB Connection Precautions
• Do not leave the same image displayed on your computer screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera or USB cradle operation while data communication is in progress. Doing so can cause data to become corrupted.
Using the Camera with a Macintosh
Computer
The following are the general steps for viewing and copying files from a Macintosh.
You can find details about each operation in the procedures that follow below. Note that you should also refer to the documentation that comes with your Macintosh for other information about USB connections, etc.
IMPORTANT!
• This camera does not support operation on a computer running Mac OS 8.6 or lower, or Mac OS X
10.0. If you have a Macintosh running Mac OS 9 or
OS X (10.1, 10.2, 10.3 or 10.4), use the standard
USB driver that comes with your OS.
1. Use the USB cradle to establish a connection between the camera and your Macintosh.
2. View and copy the images you want.
Downloaded From camera-usermanual.com Casio Manuals
228
VIEWING IMAGES ON A COMPUTER
IMPORTANT!
• If you want to transfer files from the camera’s built-in memory to a computer, make sure there is no memory card loaded in the camera before you place it onto the USB cradle.
• This camera supports USB 2.0 Hi-Speed protocol.
Though it can be used with a computer that supports only USB 1.1 protocol, higher speed data transfer becomes possible when USB 2.0 Hi-Speed is supported. Note that certain computer models, connecting through a USB hub, and other system conditions can slow down data transfer and even cause operational problems.
1.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then plug it in to a household power outlet.
• If you are using battery power without the AC adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on the area where you purchased the camera.
Downloaded From camera-usermanual.com Casio Manuals
229
VIEWING IMAGES ON A COMPUTER
[DC IN 5.3V]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2.
Connect the USB cable that comes bundled with the camera to the USB cradle and your computer’s USB port.
USB cable
(bundled)
USB port
Connector B
Connector A
[ ] (USB port)
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as far as they will go. Proper operation is not possible if connections are not correct.
[DC IN 5.3V]
Downloaded From camera-usermanual.com Casio Manuals
230
VIEWING IMAGES ON A COMPUTER
3.
Press the camera’s power button to turn it on, and then press its [MENU] button.
4.
Select the “Set Up” tab, select “USB”, and then press [
왘].
5.
Use [
왖] and [왔] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
6.
Turn off the camera.
7.
Place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it is turned on.
8.
Press the USB cradle’s [USB] button.
• Pressing the [USB] button enters the USB mode, which causes the USB cradle’s [USB] lamp to light green (page 264).
9.
Your Macintosh will see the camera’s file memory as a drive.
• The appearance of the drive icon depends on the
Mac OS version you are using.
• Your Macintosh will see the camera’s file memory as a drive whenever you establish a USB connection between the camera and your Macintosh.
10 .
Double-click the drive icon for the camera’s file memory, the “DCIM” folder, and then the folder that contains the image you want.
[USB] lamp
[USB] button
Downloaded From camera-usermanual.com Casio Manuals
231
VIEWING IMAGES ON A COMPUTER
11.
Double-click the file that contains the image you want to view.
• For information about file names, see “Memory
Folder Structure” on page 235.
NOTE
• If you open a rotated image on your Macintosh, the original unrotated version will appear (page 175).
This is true both for a rotated image opened from camera memory and for a rotated image that has been copied to your Macintosh hard disk.
12.
To copy all the files in file memory to your
Macintosh hard disk, drag the “DCIM” folder to the folder to which you want to copy it.
IMPORTANT!
• Never use your computer to edit, delete, move, or rename images stored in the camera’s file memory.
Doing so can cause problems with the image management data used by the camera, which may make it impossible to display images on the camera or it may cause large error in the number of images value displayed by the camera. Always copy images to your computer before performing any edit, delete, move, or rename operation.
13.
To terminate the USB connection, drag the drive icon that represents the camera to
Trash.
14.
Press the USB cradle’s [USB] button. After making sure the [USB] lamp is not lit, remove the camera from the USB cradle.
Downloaded From camera-usermanual.com Casio Manuals
232
VIEWING IMAGES ON A COMPUTER
■ USB Connection Precautions
• Do not leave the same image displayed on your computer screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera or USB cradle operation while data communication is in progress. Doing so can cause data to become corrupted.
Using a Memory Card to Transfer Images to a Computer
The procedures in this section describe how to transfer images from the camera to your computer using a memory card.
Using a Computer with a Built-in SD Memory Card Slot
Insert the SD memory card directly into the slot.
Using a Computer with a Built-in PC Card Slot
Use a commercially available PC card adaptor (for an SD memory card or MMC). For full details, see the user documentation that comes with the PC card adaptor and your computer.
Downloaded From camera-usermanual.com Casio Manuals
233
VIEWING IMAGES ON A COMPUTER
Using a Commercially Available SD Memory Card
Reader/Writer
See the user documentation that comes with the SD memory card reader/writer for details about how to use it.
Using a Commercially Available PC Card Reader/Writer and PC Card Adaptor (for an SD memory card or MMC)
See the user documentation that comes with the PC card reader/writer and PC card adaptor for details about how to use them.
Memory Data
Images recorded with this camera and other data are stored in memory using DCF (Design rule for Camera File system) protocol. DCF protocol is designed to make it easier to exchange image and other data between digital cameras and other devices.
DCF Protocol
DCF devices (digital cameras, printers, etc.) can exchange images with each other. DCF protocol defines a format for image file data and the folder structure for file memory, so images can be viewed using another manufacturer’s DCF camera or printed on a DCF printer.
Downloaded From camera-usermanual.com Casio Manuals
234
VIEWING IMAGES ON A COMPUTER
Memory Folder Structure
■ Folder Structure
DCIM
100CASIO
CIMG0001.JPG
CIMG0002.AVI
CIMG0003.WAV
CIMG0004.JPG
CIMG0004.WAV
101CASIO
102CASIO
(DCIM Folder)
(Storage folder)
(Image file)
(Movie file)
(Audio file)
(Audio snapshot image file)
(Audio snapshot audio file)
(Storage folder)
(Storage folder)
FAVORITE *
CIMG0001.JPG
CIMG0002.JPG
(FAVORITE folder)
(Storage file)
(Storage file)
MISC
AUTPRINT.MRK
SCENE *
UZ850001.JPE
UZ850002.JPE
MSCENE
*
UZ850001.JPE
UZ850002.JPE
(DPOF file folder)
(DPOF file)
(BEST SHOT folder)
(User setup file)
(User setup file)
(MOVIE BEST SHOT Folder)
(MOVIE BEST SHOT user setup file)
(MOVIE BEST SHOT user setup file)
* These folders are created in built-in memory only.
Downloaded From camera-usermanual.com Casio Manuals
235
■ Folder and File Contents
• DCIM folder
Folder that stores all of the digital camera files
• Storage folder
Folder for storing files created by the digital camera
• Image file
File that contains an image recorded with the digital camera (File Name Extension: JPG)
• Movie file
File that contains a movie recorded with the digital camera (File Name Extension: AVI)
• Audio file
File that contains an audio recording (File Name
Extension: WAV)
• Audio snapshot image file
File that contains the image part of an audio snapshot
(File Name Extension: JPG)
• Audio snapshot audio file
File that contains the audio part of an audio snapshot
(File Name Extension: WAV)
VIEWING IMAGES ON A COMPUTER
• FAVORITE folder (Built-in memory only)
Folder that contains Favorites image files
(Image Size: 320
× 240 pixels)
• DPOF file folder
Folder that contains DPOF files
• BEST SHOT folder (Built-in memory only)
Folder that contains BEST SHOT user setup files
• User setup file (Built-in memory only)
Files that contain BEST SHOT user setups
• MOVIE BEST SHOT folder (Built-in memory only)
Folder that contains MOVIE BEST SHOT user setup files
• MOVIE BEST SHOT user setup files (Built-in memory only)
Files that contain MOVIE BEST SHOT user setups
Image Files Supported by the Camera
• Image files recorded with this camera
• DCF protocol image files
Certain DCF functions may not be supported. When displaying an image recorded on another camera model, it may take a long time for the image to appear on the display.
Downloaded From camera-usermanual.com Casio Manuals
236
VIEWING IMAGES ON A COMPUTER
■ Built-in Memory and Memory Card
Precautions
• Note that the folder named “DCIM” is the parent (top) folder of all the files in memory. When transferring memory contents to a hard disk, CD-R, MO disk, or other external storage, treat all the contents inside a DCIM folder as a set and always keep them together. You can change the name of the DCIM folder on your computer.
Changing the name to a date is a good way to keep track of multiple DCIM folders. However, if you even want to copy the folders back to the camera’s file memory, be sure you change the name of the DCIM folder back to
“DCIM” first. The camera does not recognize any folder name other than DCIM.
• Memory Folders and files must be stored in accordance with the “Memory Folder Structure” shown on page 235 in order for the camera to be able to recognize them correctly.
Downloaded From camera-usermanual.com Casio Manuals
237
USING THE CAMERA WITH A COMPUTER
USING THE CAMERA WITH A COMPUTER
This section explains the software and applications on the CD-ROM that comes bundled with the camera, and provides an overview of what you can do with them.
Note that the procedure you need to perform depends on whether you are using computer running under Windows (see below) or a Macintosh (see page 253).
Using the Camera with a Windows Computer
Your digital camera comes bundled with useful applications for using it in combination with a computer. Install the applications you need on your computer.
Selecting the Software You Need
Install the software on your computer that allows you to perform the type of operations you want.
Purpose
USB connection to a computer for image transfer
Management of images transferred to a computer
–
Software Name
USB driver Type B
Photo Loader 2.3
* DirectX 9.0c
Supported Windows Versions
XP/2000/Me
98SE/98
XP/2000/Me/98SE/98
Required Operation
Use the USB cradle to establish a connection between the camera and computer. Installation of the USB driver is not required (page 220).
Use the USB cradle to establish a connection between the camera and computer. Install the USB driver Type
B (page 220).
Install Photo Loader 2.3 (page 242).
* If the computer does not have
DirectX 9.0 or higher installed, install
DirectX 9.0c (page 244).
Downloaded From camera-usermanual.com Casio Manuals
238
USING THE CAMERA WITH A COMPUTER
Purpose
Snapshot retouching, reorientation, printing
Movie playback
Software Name
Photohands 1.0
Windows Media Player 9
* DirectX 9.0c
Movie editing
Viewing of user documentation (PDF) files
Windows 98
WMP6.4 codec
Ulead Movie Wizard SE
VCD
–
Adobe Reader 6.0
–
Supported Windows Versions
XP/2000/Me/98SE/98
Required Operation
Install Photohands 1.0 (page 245).
XP/2000/Me/98SE
98
XP/2000
Me/98SE/98
XP/2000/Me/98SE
98
• If you can connect to the Internet, connect to the Internet for automatic installation for the applicable codec (page 247).
• If you cannot connect to the Internet, install
Windows Media Player 9 (page 248).
* If you are running Windows 2000 or 98SE with a DirectX version that is lower than 9.0, install DirectX 9.0c (page 244).
• If you can connect to the Internet, connect to the Internet for automatic installation for the applicable codec (page 247).
• If you cannot connect to the Internet, install the
Windows 98 WMP6.4 codec (page 249).
Install Ulead Movie Wizard SE VCD (page 250).
–
If your computer does not already have Adobe
Reader or Adobe Acrobat Reader installed, install Adobe Reader 6.0 (page 252).
If your computer does not already have Adobe
Reader or Adobe Acrobat Reader installed, go to the Adobe Systems Incorporated website and install Acrobat Reader 5.0.5.
Downloaded From camera-usermanual.com Casio Manuals
239
USING THE CAMERA WITH A COMPUTER
Computer System Requirements
Computer system requirements are different for each of the applications. Be sure to check the requirements for the particular application you are trying to use. Note that the values provided here are minimum requirements for running each application. Actual requirements are greater, depending on the number of images and the sizes of the images being handled.
USB driver Type B
OS: 98SE/98
• In the case of Windows XP, 2000, or Me, connect the camera to the computer using the bundled USB cradle.
You do not need to install the USB driver from the bundled CD-ROM.
• Correct operation is not guaranteed on a computer that has been upgraded from Windows 95 or 3.1.
Photo Loader 2.3
OS: XP/2000/Me/98SE/98
Memory: At least 16MB
HD: At least 7MB
Other: Internet Explorer 5.5 or higher; DirectX 9.0 or higher
Downloaded From camera-usermanual.com Casio Manuals
240
USING THE CAMERA WITH A COMPUTER
Photohands 1.0
OS: XP/2000/Me/98SE/98
Memory: At least 64MB
HD: At least 10MB
DirectX 9.0c
OS: XP/2000/Me/98SE/98
HD: At least 65MB free space during installation, 18MB after installation is complete.
Adobe Reader 6.0
OS: XP/2000/Me/98SE
CPU: Pentium
Memory: 32MB
HD: 60MB
Other: Internet Explorer 5.01 or higher
Windows Media Player 9
OS: XP/2000/Me/98SE
CPU: 233 MHz Intel Pentium II, AMD, etc.
Memory: 64MB
HD: 100MB
Other: Sound card; 800
× 600 or greater display resolution;
Internet Explorer 5.01 or higher
• If you are running Windows 98, install the Windows 98
WMP6.4 codec from the CD-ROM.
Ulead Movie Wizard SE VCD
OS: XP/2000
CPU: Pentium III 800MHz
Memory: 256MB
HD: 250MB
Other: 1024
× 768 or higher display resolution
IMPORTANT!
• For details about Windows minimum system requirements, see the “Read me” file on the CD-
ROM that comes bundled with the camera.
Downloaded From camera-usermanual.com Casio Manuals
241
USING THE CAMERA WITH A COMPUTER
Managing Images on a PC
To manage images on a PC, you need to install the Photo
Loader application from the CD-ROM that comes with the camera.
• Use the CD-ROM whose contents label shows “Photo
Loader”.
NOTE
• If you already have Photo Loader installed on your computer, check its version. If the bundled version is newer than the one you have, uninstall the old version of Photo Loader and then install the newer version.
The CD-ROM includes the software and user documentation for various languages. Check the CD-ROM menu screen to see if applications and user documentation are available for a particular language.
■ Getting Started
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu application, which displays a menu screen on your computer.
• The menu application may not start up automatically on some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu application.
■ Selecting a Language
First select a language. Note that some software is not available in all languages.
1.
On the menu screen, click the tab for the language you want.
Downloaded From camera-usermanual.com Casio Manuals
242
USING THE CAMERA WITH A COMPUTER
■ Viewing the Contents of the “Read me” File
You should always read the “Read me” file for “Photo
Loader” before installing it. The “Read me” file contains information you need to know when installing the application.
1.
Click the “Read me” button for “Photo
Loader”.
IMPORTANT!
• Before upgrading or reinstalling Photo Loader, or before installing it onto another computer, be sure to read the “Read me” file for information about retaining existing libraries.
■ Installing Photo Loader
1.
Click the “Install” button for “Photo Loader”.
2.
Follow the instructions that appear on your computer screen.
IMPORTANT!
• Be sure to follow the instructions carefully and completely. If you make a mistake when installing
Photo Loader, you may not be able to browse your existing library information and HTML files that are created automatically by Photo Loader. In some cases, image files may be lost.
Downloaded From camera-usermanual.com Casio Manuals
243
USING THE CAMERA WITH A COMPUTER
■ Checking for the Proper Version of DirectX
In order to manage images using Photo Loader, your computer also needs to have DirectX 9.0 or higher installed. You can check the installed version of DirectX using your PC’s DirectX Diagnostic Tool.
1.
On your PC, click [Start], [All Programs],
[Accessories], [System Tools], and then
[System Information].
2.
On the [Tools] menu of the window that appears, select [DirectX Diagnostic Tool].
3.
On the [System] tab, check to make sure that the version shown for the “DirectX Version” item is 9.0 or higher.
4.
Click [Exit] to exit DirectX Diagnostic Tool.
• If your PC already has DirectX 9.0 or higher installed, you do not need to install DirectX 9.0c from the bundled CD-ROM.
• If your PC does not have DirectX 9.0 or higher installed, install DirectX 9.0c from the bundled CD-
ROM.
Downloaded From camera-usermanual.com Casio Manuals
244
USING THE CAMERA WITH A COMPUTER
Retouching, Reorienting, and Printing a
Snapshot
In order to retouch, reorient, or print snapshots on your PC, you need to install Photohands from the CD-ROM that comes bundled with the camera.
• Use the CD-ROM whose contents label shows
“Photohands”.
NOTE
• If you already have Photohands installed on your computer, check its version. If the bundled version is newer than the one you have, uninstall the old version of Photohands and then install the newer version.
The CD-ROM includes the software and user documentation for various languages. Check the CD-ROM menu screen to see if applications and user documentation are available for a particular language.
■ Getting Started
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu application, which displays a menu screen on your computer.
• The menu application may not start up automatically on some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu application.
■ Selecting a Language
First select a language. Note that some software is not available in all languages.
1.
On the menu screen, click the tab for the language you want.
Downloaded From camera-usermanual.com Casio Manuals
245
USING THE CAMERA WITH A COMPUTER
■ Viewing the Contents of the “Read me” File
You should always read the “Read me” file for
“Photohands” before installing it. The “Read me” file contains information you need to know when installing the application.
1.
Click the “Read me” button for “Photohands”.
■ Installing Photohands
1.
Click the “Install” button for “Photohands”.
2.
Follow the instructions that appear on your computer screen.
Downloaded From camera-usermanual.com Casio Manuals
246
USING THE CAMERA WITH A COMPUTER
Playing a Movie
In order to play a movie recorded with this camera on your
PC using Windows Media Player, you need to install
MPEG-4 codec.
■ To install the codec on a PC that can
connect to the Internet
1.
Connect the PC to the Internet.
2.
Click the movie file that was recorded with the camera.
3.
If your PC does not have MPEG-4 codec installed, it will connect to the Microsoft website automatically and download the codec.
4.
Install the downloaded MPEG-4 codec.
5.
This will cause the movie file recorded with the camera to start playing.
NOTE
• If your PC already has MPEG-4 codec installed, it will start playing the movie as soon as you click it.
• Note the following important precautions when playing back a movie using Windows Media Player 9.
— When using a high-speed type SD memory card
Use Windows Media Player as-is, without changing its basic settings.
— When using an SD memory card that is not a high-speed type
Change Windows Media Player settings as shown below. These settings will enable more stable movie display.
1. On the Windows Media Player [Tools] menu, select [Options]. On the dialog box that appears, open the [Performance] tab.
2. In the “Video acceleration” area click [Advanced].
3. In the “Video acceleration” area, clear the “Use video mixing renderer” check box.
4. In the “Legacy video renderer” area, clear the
“Use YUV Flipping” check box.
• Be sure to move the movie data to the hard disk of your PC before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.
Downloaded From camera-usermanual.com Casio Manuals
247
USING THE CAMERA WITH A COMPUTER
■ To install the codec on a PC that cannot
connect to the Internet
If your PC cannot connect to the Internet, install Windows
Media Player 9 from the CD-ROM that comes bundled with the camera.
• Use the CD-ROM whose contents label shows “Windows
Media Player”.
● Getting Started
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu application, which displays a menu screen on your computer.
• The menu application may not start up automatically on some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu application.
● Selecting a Language
First select a language. Note that some software is not available in all languages.
1.
On the menu screen, click the tab for the language you want.
Downloaded From camera-usermanual.com Casio Manuals
248
USING THE CAMERA WITH A COMPUTER
● Viewing the Contents of the “Read me” File
You should always read the “Read me” file for “Windows
Media Player 9” before installing it. The “Read me” file contains information you need to know when installing the application.
1.
Click the “Read me” button for “Windows
Media Player 9”.
● Installing Windows Media Player 9
1.
Click the “Install” button for “Windows Media
Player 9”.
2.
Follow the instructions that appear on your computer screen.
IMPORTANT!
• If your PC is running Windows 98, install the
Windows 98 WMP6.4 codec instead of Windows
Media Player 9.
• In the case of Windows 2000 or 98SE, you need to install DirectX 9.0c. For information about determining the version of DirectX on your PC, see page 244.
• Note the following important precautions when playing back a movie using Windows Media Player 9.
— When using a high-speed type SD memory card
Use Windows Media Player as-is, without changing its basic settings.
— When using an SD memory card that is not a high-speed type
Change Windows Media Player settings as shown below. These settings will enable more stable movie display.
1. On the Windows Media Player [Tools] menu, select [Options]. On the dialog box that appears, open the [Performance] tab.
2. In the “Video acceleration” area click [Advanced].
3. In the “Video acceleration” area, clear the “Use video mixing renderer” check box.
4. In the “Legacy video renderer” area, clear the
“Use YUV Flipping” check box.
Downloaded From camera-usermanual.com Casio Manuals
249
USING THE CAMERA WITH A COMPUTER
■ Movie Playback Precaution
The recommended system requirements described below are necessary to use your computer to play back movies recorded with this camera.
OS: XP
CPU: Pentium M 1GHz or higher
Pentium 4 2GHz or higher
Required software: Windows Media Player 9 (bundled with camera)
DirectX 9.0c (bundled with camera)
IMPORTANT!
• The above is the recommended environment.
Configuring this environment does not guarantee proper operation.
• Even if your computer meets the recommended requirements described above, certain settings and other installed software may interfere with proper playback of movies.
Editing a Movie
In order to edit movies on your PC, you need to install
Ulead Movie Wizard SE VCD from the bundled CD-ROM.
• Use the CD-ROM whose contents label shows “Ulead
Movie Wizard SE VCD”.
IMPORTANT!
• Operation of Ulead Movie Wizard SE VCD is not supported under Windows Me, 98SE, or 98.
NOTE
• The Ulead Movie Wizard SE VCD application that comes on the bundled CD-ROM can create Video-
CDs, but it cannot created DVDs. If you want to be able to create DVDs, you need to upgrade to the commercial version. See the “Read me” file on the
CD-ROM for information about Ulead Movie Wizard
SE VCD, and what you need to do to upgrade to the commercial version.
Downloaded From camera-usermanual.com Casio Manuals
250
USING THE CAMERA WITH A COMPUTER
■ Getting Started
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu application, which displays a menu screen on your computer.
• The menu application may not start up automatically on some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu application.
■ Selecting a Language
First select a language. Note that some software is not available in all languages.
1.
On the menu screen, click the tab for the language you want.
■ Viewing the Contents of the “Read me” File
You should always read the “Read me” file for “Ulead
Movie Wizard SE VCD” before installing it. The “Read me” file contains information you need to know when installing the application.
1.
Click the “Read me” button for “Ulead Movie
Wizard SE VCD”.
■ Installing Ulead Movie Wizard SE VCD
1.
Click the “Install” button for “Ulead Movie
Wizard SE VCD”.
2.
Follow the instructions that appear on your computer screen.
Downloaded From camera-usermanual.com Casio Manuals
251
USING THE CAMERA WITH A COMPUTER
Viewing User Documentation (PDF Files)
1.
In the “Manual” area, click the name of the manual you want to read.
IMPORTANT!
• You must have Adobe Reader or Adobe Acrobat
Reader installed on your computer in order to view the contents of a PDF file. If you do not already have
Adobe Reader installed, you can install it from the bundled CD-ROM.
User Registration
You can perform user registration over the Internet. To do so, of course, you need to be able to connect to the
Internet with your computer.
1.
Click the “Register” button.
• This starts up your Web browser and accesses the user registration website. Follow the instructions that appear on your computer screen to register.
Exiting the Menu Application
1.
On the menu screen, click “Exit” to exit the menu.
Downloaded From camera-usermanual.com Casio Manuals
252
USING THE CAMERA WITH A COMPUTER
Using the Camera with a Macintosh Computer
Your digital camera comes bundled with useful applications for using it in combination with a computer. Install the applications you need on your computer.
Selecting the Software You Need
Install the software on your Macintosh that allows you to perform the type of operations you want.
Purpose
USB connection to a Macintosh for image transfer
Managing of Images on a Macintosh
Movie playback
Viewing of user documentation
(PDF) files
–
Photo Loader 1.1
–
CASIO AVI Importer component 1.0
–
Software Name Mac OS Versions
OS 9/OS X
OS 9
OS X
OS X
OS 9/OS X
Required Operation
Use the USB cradle to establish a connection between the camera and your Macintosh. USB driver is not required (page 228).
Install Photo Loader 1.1 (page
255).
Use iPhoto, which comes bundled with your operating system (page
255).
Installing CASIO AVI Importer component 1.0 makes it possible to play back movies using the
QuickTime application that comes bundled with your operating system
(page 256)
Use Adobe Reader or Adobe
Acrobat Reader, which comes bundled with your operating system
(page 258).
Downloaded From camera-usermanual.com Casio Manuals
253
USING THE CAMERA WITH A COMPUTER
Computer System Requirements
Computer system requirements are different for each of the applications. Be sure to check the requirements for the particular application you are trying to use. Note that the values provided here are minimum requirements for running each application. Actual requirements are greater, depending on the number of images and the sizes of the images being handled.
Photo Loader 1.1
OS: OS 9
Memory: 32MB
HD: At least 3MB
• USB connection is supported on a Macintosh running OS
9 or X. Operation is supported using the standard USB driver that comes with the operating system, so all you need to do is connect the camera to your Macintosh using the USB cable.
CASIO AVI Importer component 1.0
OS: OS X 10.2.8 or greater
QuickTime: QuickTime 6.5.2 or greater
IMPORTANT!
• For details about Macintosh minimum system requirements, see the “Readme” file on the CD-ROM that comes bundled with the camera.
Downloaded From camera-usermanual.com Casio Manuals
254
USING THE CAMERA WITH A COMPUTER
Managing Images on a Macintosh
■ To manage images on a Macintosh running
OS 9
Install the Photo Loader application from the CD-ROM that comes with the camera.
• Use the CD-ROM whose contents label shows “Photo
Loader”.
● To install Photo Loader
1.
Open the folder named “Photo Loader”.
2.
Open the folder named “English”, and then open the file named “Important”.
3.
Open the folder named “Installer”, and then open the file named “readme”.
4.
Follow the instructions in the “readme” file to install Photo Loader.
IMPORTANT!
• If you are upgrading to the new version of Photo
Loader from a previous version and you want to use library management data and HTML files created using the old version of Photo Loader, be sure to read the “Important” file in the “Photo Loader” folder.
Follow the instructions in the file to use your existing library management files. Failure to follow this procedure correctly can result in loss or corruption of your existing files.
■ To manage images on a Macintosh running
OS X
Use iPhoto, which comes bundled with the operating system. iPhoto enables management of snapshots.
Downloaded From camera-usermanual.com Casio Manuals
255
USING THE CAMERA WITH A COMPUTER
Playing Back a Movie on your Macintosh
To playback movies on your Macintosh using QuickTime, install CASIO AVI Importer component from the CD-ROM that comes bundled with the camera.
• Installing CASIO AVI Importer component makes it possible to play back AVI format (MPEG-4 standard) movie data recorded on a High Quality Movie digital camera on a Macintosh, using the QuickTime application that comes bundled with the Macintosh operating system.
● To install CASIO AVI Importer component
1.
Place the CD-ROM that comes bundled with the camera into your Macintosh CD-ROM drive.
2.
On the CD-ROM, open the folder named
“Movie Component”. There you will find a file named “CASIO AVI Importer. component”.
3.
Double-click the “Library” folder on the startup disk.
4.
In the “Library” folder, double-click
“QuickTime”.
5.
Drag “CASIO AVI Importer. component” to the
“QuickTime” folder.
• This installs “CASIO AVI Importer. component” in the
“QuickTime” folder.
• If there are any other AVI components in the
[QuickTime] folder, it can make proper movie playback impossible. Move the other AVI components to another location outside the
[QuickTime] folder.
Downloaded From camera-usermanual.com Casio Manuals
256
USING THE CAMERA WITH A COMPUTER
6.
Restart your Macintosh and confirm that
QuickTime can play the movies properly.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.
■ Movie Playback Precaution
The minimum system requirements described below are necessary to use your Macintosh to play back movies recorded with this camera.
OS: OS X 10.2.8 or greater
Required Software: QuickTime 6.5.2 or greater
IMPORTANT!
• The above is the recommended environment.
Configuring this environment does not guarantee proper operation.
• Even if your computer meets the minimum requirements described above, certain settings and other installed software may interfere with proper playback of movies.
Downloaded From camera-usermanual.com Casio Manuals
257
USING THE CAMERA WITH A COMPUTER
Viewing User Documentation (PDF Files)
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file.
If you don’t, go to the Adobe Systems Incorporated website and install Acrobat Reader.
■ To view the camera user’s guide
1.
On the CD-ROM, open the “Manual” folder.
2.
Open the “Digital Camera” folder, and then open the folder for the language whose user’s guide you want to view.
3.
Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is for English.)
■ To view the Photo Loader user’s guide
1.
On the CD-ROM, open the “Manual” folder.
2.
Open the “Photo Loader” folder and then open the “English” folder.
3.
Open “PhotoLoader_english”.
To register as a camera user
Internet registration only is supported. Visit the following
CASIO website to register: http://world.casio.com/qv/register/
Downloaded From camera-usermanual.com Casio Manuals
258
APPENDIX
APPENDIX
Menu Reference
The following shows lists of menus that appear in a REC mode and the PLAY mode, and their settings.
• The settings that are underlined in the following table are initial defaults.
■ REC Modes
● REC Tab Menu
Self-timer
Anti Shake
REC Light
AF Area
AF Assist Light
L/R Key
Quick Shutter
Audio Snap
Grid
Digital Zoom
Review
Icon Help
10 sec / 2 sec / X3 / Off
Auto / Off
Auto / On / Off
Spot / Multi / Free
On / Off
EV Shift / White Balance / ISO / Metering /
Self-timer / Off
On / Off
On / Off
On / Off
On / Off
On / Off
On / Off
Downloaded From camera-usermanual.com Casio Manuals
259
Memory Flash: On / Off
Focus: On / Off
White Balance: On / Off
ISO: On / Off
AF Area: On / Off
Metering: On / Off
Self-timer: On / Off
Flash Intensity: On / Off
Digital Zoom: On / Off
MF Position: On / Off
Zoom Position: On / Off
APPENDIX
● Quality Tab Menu
Size 8M (3264
× 2448) /
8M (3:2) (3264
× 2176 (3:2)) /
6M (2816
× 2112) / 4M (2304 × 1728) /
2M (1600
× 1200) / VGA (640 × 480)
Fine / Normal / Economy Quality
(Snapshots)
Quality
(Movies)
EV Shift
HQ / Normal / LP
White Balance
ISO
–2.0 / –1.7 / –1.3 / –1.0 / –0.7 / –0.3 / 0.0 /
+0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0
Auto / (Daylight) / (Cloudy) /
(Shade) /
N
(Day White) /
D
(Daylight) / (Tungsten) / Manual
Auto / ISO 50 / ISO 100 / ISO 200 / ISO 400
Metering
Filter
Sharpness
Saturation
Contrast
Flash Intensity
Flash Assist
Multi / Center weighted / Spot
Off / B/W / Sepia / Red / Green / Blue /
Yellow / Pink / Purple
+2 / +1 / 0 / –1 / –2
+2 / +1 / 0 / –1 / –2
+2 / +1 / 0 / –1 / –2
+2 / +1 / 0 / –1 / –2
Auto / Off
Downloaded From camera-usermanual.com Casio Manuals
260
● Set Up Tab Menu
Screen
Sounds
Startup
File No.
World Time
Timestamp
Adjust
Date Style
Language
Sleep
Auto Power Off
REC / PLAY
USB
Video Out
Format
Reset
Auto 2 / Auto 1 / +2 / +1 / 0
Startup / Half Shutter /Shutter / Operation /
Operation / Play
On (Selectable image) / Off
Continue / Reset
Home / World
Home Time setup (city, DST, etc.)
World Time setup (city, DST, etc.)
Date / Date&Time / Off
Time setting
YY/MM/DD / DD/MM/YY / MM/DD/YY
/ English / Français / Deutsch /
Español / Italiano / Português /
/
30 sec / 1 min / 2 min / Off
2 min / 5 min
/
Power On / Power On/Off / Disable
Mass Storage (USB DIRECT- PRINT) /
PTP (PictBridge)
NTSC / PAL
Format / Cancel
Reset / Cancel
APPENDIX
■ PLAY Mode
● PLAY Tab Menu
Slideshow
MOTION PRINT
Movie Editing
Anti Shake
White Balance
Brightness
Keystone
Color Correction
Favorites
DPOF
Protect
Date/Time
Rotation
Resize
Trimming
Dubbing
Copy
Start / Images / Time / Interval / Effect /
Cancel
9 frames / 1 frame / Cancel
Cut (Before) /
(Between) /
Cut
Cut (After) / Cancel
On / Off
(Daylight) / (Cloudy) /
(Shade) /
N
(Day White) /
D
(Daylight) / (Tungsten) / Cancel
+2 / +1 / 0 / –1 / –2
–
–
Show / Save / Cancel
Select images / All images / Cancel
On / All Files : On / Cancel
–
Rotate / Cancel
6M / 4M / VGA / Cancel
–
–
Built-in Card / Card Built-in / Cancel
Downloaded From camera-usermanual.com Casio Manuals
261
● Set Up Tab Menu
• The contents of the PLAY mode set up tab menu are identical to those of the REC modes set up tab menu.
APPENDIX
Indicator Lamp Reference
The camera has three indicator lamps: a green operation lamp, a red operation lamp, and a AF assist light/REC light/ self-timer lamp. These lamps light and flash to indicate the current operational status of the camera.
Operation lamp
AF assist light/REC light/self-timer lamp
Green
Red
* There are three lamp flash patterns. Pattern 1 flashes once per second, Pattern 2 flashes twice per second, and Pattern 3 flashes four times per second. The table below explains what each flash pattern indicates.
Downloaded From camera-usermanual.com Casio Manuals
262
■ REC Modes
Operation Lamp
Green
Lit
Lit
Pattern 3
Lit
Pattern 2
Pattern 1
Red
Pattern 3
Lit
Pattern 1
Pattern 2
AF assist light/REC light/selftimer lamp
White
Meaning
Pattern 1
Pattern 2
Operational (Power on, recording enabled)
Flash is charging.
Flash charging is complete.
Auto Focus operation was successful.
Cannot Auto Focus.
Monitor screen is off. / Sleep state
Storing image
Storing movie data / processing image data
Self-timer countdown
(10 to 3 seconds)
Self-timer countdown
(3 to 0 seconds)
Cannot charge flash.
Memory card problem / Memory card is unformatted. / BEST SHOT setup cannot be registered.
C
APPENDIX
Operation Lamp
Green
Pattern 3
Pattern 3
Red
Lit
Pattern 3
AF assist light/REC light/selftimer lamp
White
Meaning
Memory card is locked. /
Cannot create folder. /
Memory is full. / Write error
Low battery alert
Formatting card
Powering down
IMPORTANT!
• When you are using a memory card, never remove the card from the camera while the green operation lamp is flashing. Doing so will cause recorded images to be lost.
Downloaded From camera-usermanual.com Casio Manuals
263
C
APPENDIX
■ PLAY Mode
Operation Lamp
Green Red
AF assist light/REC light/selftimer lamp
White
Lit
Pattern 3
Pattern 2
Lit
Pattern 3
Meaning
Operational (Power on, recording enabled)
One of the following operations is being performed: delete, DPOF, image protect, copy, format, power down, image resizing, image trimming, after recording, keystone correction, color correction,
MOTION PRINT, movie editing
Memory card problem / Memory card is unformatted.
Memory card is locked. / Cannot create folder. / Memory is full.
Low battery alert
■ USB Cradle Indicator Lamps
The USB cradle has two indicator lamps: a [CHARGE] lamp and a [USB] lamp. These lamps light and flash to indicate the current operational status of the USB cradle and camera.
[CHARGE] lamp [USB] lamp
[CHARGE] lamp
Color
Red
Green
Amber
Red
Status
Lit
Lit
Lit
Flashing
[USB] lamp
Color
Green
Green
Meaning
Status
Lit
Flashing
Charging
Charging complete
Charge standby
Charge error
USB connection
Accessing memory
Downloaded From camera-usermanual.com Casio Manuals
264
C
APPENDIX
Troubleshooting Guide
Symptom
Power does not turn on.
Possible Cause
1) The battery is not oriented correctly.
2) The battery is dead.
Camera suddenly powers down.
Image is not recorded when the shutter button is pressed.
1) Auto Power Off activated (page 47).
2) The battery is dead.
1) The camera is in the PLAY mode.
2) Flash unit is being charged.
3) Memory is full.
Action
1) Orient the battery correctly (page 35).
2) Charge the battery (page 37). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available NP-40 rechargeable lithium ion battery.
1) Turn power back on.
2) Charge the battery (page 37).
1) Press [ ] (REC) to enter the REC mode.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your computer and then delete files from image memory, or use a different memory card.
Downloaded From camera-usermanual.com Casio Manuals
265
APPENDIX
Symptom
Auto Focus does not focus properly.
The subject is out of focus in the recorded image.
Possible Cause
1) The lens is dirty.
2) The subject is not located in the center of the focus frame when you compose the image.
3) The subject you are shooting is a type that is not compatible with Auto Focus operation (page
61).
4) You are moving the camera.
Action
1) Clean the lens.
2) Make sure the subject is centered in the focus frame when composing the image.
3) Use manual focus (page 85).
4) Turn on Anti Shake or mount the camera on a tripod (page 108).
The image is not focused properly.
When composing the image, make sure the subject on which you want to focus is located inside the focus frame (page 57).
Scenery shots are out of focus.
The flash does not fire.
1) The image is not focused properly.
2) The wrong focus mode is selected.
3) The wrong BEST SHOT scene is selected.
1) “ ” (flash off) is selected as the flash mode.
2) The battery is dead.
3) A scene that selects “ flash mode is selected in the BEST SHOT mode.
” (flash off) as the
1) When composing the image, make sure the subject on which you want to focus is located inside the focus frame (page 57).
2) Change the focus mode to “ ” (Auto Focus, page 80) or “ ” (infinity, page 85).
3) Change the BEST SHOT scene to “Scenery”
(page 103).
1) Select a different flash mode (page 67).
2) Charge the battery (page 37).
3) Select a different flash mode (page 67) or
BEST SHOT scene (page 103).
Downloaded From camera-usermanual.com Casio Manuals
266
APPENDIX
Symptom
Camera powers down during self-timer countdown.
Possible Cause
The battery is dead.
Monitor screen image is out of focus.
1) You are using the Manual Focus mode and have not focused the image.
2) You are trying to use the Macro mode ( ) when shooting a scenery or portrait shot.
3) You are trying to use Auto Focus or the Infinity mode ( ) when shooting a close-up shot.
Recorded images are not saved in memory.
Though available lighting is bright, the faces of human subjects appear dark.
1) Camera powers down before the save operation is complete.
2) Removing the memory card before the save operation is complete.
Not enough light is reaching the subjects.
Subjects are too dark when recording images on a seashore or at a ski area.
Sunlight reflected by water, sand, or snow, can cause underexposure of images.
Action
Charge the battery (page 37).
1) Focus the image (page 86).
2) Use Auto Focus for scenery and portrait shots.
3) Use the Macro mode ( ) for close-ups.
1) When the battery indicator shows “ ”, charge the battery as soon as possible (page 37).
2) Do not remove the memory card before the save operation is complete.
• Change the flash mode setting to “ ” (flash on) for daylight synchro flash (page 69).
• Increase the EV shift value (page 88).
• Change the flash mode setting to “ ” (flash on) for daylight synchro flash (page 69).
• Increase the EV shift value (page 88).
Downloaded From camera-usermanual.com Casio Manuals
267
APPENDIX
Symptom
Vertical lines on the monitor screen.
Out of focus images.
Digital noise in images.
Recording a very brightly lit subject can cause a vertical band to appear in the monitor screen image.
Possible Cause
The subject is outside the shooting range of the camera.
Sensitivity is increased automatically for dark subjects. Greater sensitivity increases the chance of digital noise.
Sunlight or light from another source is shining directly into the lens during recording.
Action
This is a CCD phenomenon known as “vertical smear”, and does not indicate malfunction of the camera. Note that vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a movie.
Record within the allowable shooting range.
Use a light or some other means to illuminate the subject.
Position the camera so sunlight does not shine directly into the lens.
Color of the playback image is different from the image on the monitor screen during recording.
Images are not displayed.
A memory card with non-DCF images recorded with another camera is loaded in the camera.
This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
Downloaded From camera-usermanual.com Casio Manuals
268
APPENDIX
Symptom
All buttons and switches are disabled.
Possible Cause
Circuit problem caused by electrostatic charge, impact, etc. while the camera was connected to another device.
USB communication is in progress.
Remove the battery from the camera, reinsert it, and then try again.
Action
Monitor screen is off.
Cannot transfer files over a
USB connection.
1) Camera is not set securely on the USB cradle.
2) USB cable is not connected securely.
3) USB driver is not installed.
4) Camera is turned off.
After confirming that the computer is not accessing camera memory, disconnect the USB cable.
1) Check the connection between the camera and
USB cradle.
2) Check all connections.
3) Install the USB driver on your computer (page
220).
4) Press the [USB] button on the USB cradle.
Downloaded From camera-usermanual.com Casio Manuals
269
APPENDIX
If you have problems installing the USB driver...
You may not be able to install the USB driver properly if you use the USB cable to connect the camera to a computer running
Windows 98SE/98 before installing the USB driver from the bundled CD-ROM, or if you have another type of driver installed.
This will make it impossible for the computer to recognize the digital camera when it is connected. If this happens, you will need to re-install the camera’s USB driver. For information about how to re-install the USB driver, see the USB driver’s “Read me” file on the CD-ROM that comes bundled with the camera.
Downloaded From camera-usermanual.com Casio Manuals
270
APPENDIX
Display Messages
Battery is low.
Cannot correct image!
The battery is dead.
Keystone correction cannot be performed for some reason. The image will be stored as-is, without correction (pages 112, 114).
Can not find the file.
The camera cannot find a image specified by the slideshow “Images” setting. Specify another image
(page 172).
Cannot register any more files.
• You are attempting to save a BEST SHOT scene when there are already 999 scenes in the
“SCENE” folder, or a MOVIE BEST SHOT when there are already 999 scenes in the “MSCENE” folder (pages 107, 125).
• You are attempting to copy a FAVORITE file when the “FAVORITE” folder already contains
9999 files (page 188).
Card ERROR
Some problem occurred with the memory card.
Turn off the camera, and remove and then reinsert the memory card. If the same message appears, format the memory card (page 206).
IMPORTANT!
Formatting the memory card deletes all files on the memory card. Before formatting, try transferring recoverable files to a computer or some other storage device.
Check connections!
• You are attempting to connect the camera to a printer while the camera’s USB settings are not compatible with the USB system of the printer
(page 200).
• You are attempting to connect to a computer that does not have a USB driver installed (page 220).
File could not be saved because battery is low.
Folder cannot be created.
The battery is dead, so the recorded image could not be saved.
LENS ERROR
This message appears when you try to record an image while there are 9,999 files stored in the
999th folder. If you want to record more files, delete files you no longer need (page 183).
This message appears and the camera turns off whenever lens performs some unexpected operation. If the same message appears after you turn power back on, contact your retailer or a
CASIO service center.
Load paper!
Memory Full
No Favorites file!
The camera is in the Printer mode, and the printer is out of paper.
Memory is full. If you want to record more files, delete files you no longer need (page 183).
There is no FAVORITE file.
Downloaded From camera-usermanual.com Casio Manuals
271
APPENDIX
Printing Error
Record Error
Replenish ink!
One of the following problems occurred during printing.
• Printer power off
• Printer internal error
Image compression could not be performed during image data storage for some reason. Record the image again.
The camera is in the Printer mode, and the printer is running low on ink or is out of ink.
RETRY POWER ON
If the lens comes into contact with some obstacle, this message appears and the camera turns off. Take action to remove the obstacle, and try turning on power again.
SYSTEM ERROR
The card is locked.
Your camera system is corrupted. Contact your retailer or a CASIO service center.
The LOCK switch of the SD memory card is locked.
You cannot store images to or delete images from a memory card that is locked.
There are no files.
• There are no files in built-in memory or on the memory card.
• This message will appear if you rename the files or folders in camera memory or if you move them to different locations. If this happens, move the files or folders back to their original locations in camera memory and return them to their original preset names (pages 235, 237).
There are no printing images.
Set up DPOF.
There are no DPOF settings specifying images and the number of copies of each for printing.
Configure the required DPOF settings (page 211).
There is no image to register.
The image or movie whose setup you are trying to save is not supported by BEST SHOT.
This card is not formatted.
This file cannot be played.
The memory card loaded in the camera is not formatted. Format the memory card (page 206).
The image file or audio file is corrupted, or is a type that cannot be displayed by this camera.
This function cannot be used.
You attempted to copy files from built-in memory to a memory card loaded in the camera while there is no memory card in the camera (page 207).
This function is not supported for this file.
The function you are trying to perform is not supported for the file on which you are trying to perform it.
Downloaded From camera-usermanual.com Casio Manuals
272
APPENDIX
Specifications
Product ............................... Digital Camera
Model .................................. EX-Z850
■ Camera Functions
Image Files Format
Snapshots ....................... JPEG (Exif Ver.2.2); DCF (Design rule for Camera File system) 1.0 standard;
DPOF compliant
Movies ............................. AVI (MPEG-4)
Audio ............................... WAV
Recording Media ............... 8.0MB built-in memory
SD Memory Card
MultiMediaCard
Data Size
• Snapshots
File Size
(pixels)
8M
3264
× 2448
8M (3:2)
3264
× 2176
(3:2)
6M
2816
× 2112
4M
2304
× 1728
2M
1600
× 1200
VGA
640
× 480
Economy
Fine
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Economy
Quality
Fine
Normal
Economy
Fine
Normal
Economy
Fine
Normal
Approximate
Image File Size
Built-in memory 8.0MB
4.8MB
3.18MB
1.63MB
4.34MB
1 shot
2 shots
4 shots
1 shot
2.89MB
1.45MB
3.63MB
2.3MB
2 shots
5 shots
2 shots
3 shots
1.21MB
2.43MB
1.62MB
810KB
1.17MB
780KB
390KB
360KB
240KB
120KB
6 shots
3 shots
4 shots
8 shots
6 shots
9 shots
17 shots
20 shots
30 shots
57 shots
SD Memory
Card 256MB*
48 shots
72 shots
140 shots
54 shots
81 shots
157 shots
65 shots
101 shots
186 shots
97 shots
143 shots
271 shots
196 shots
286 shots
530 shots
625 shots
938 shots
1742 shots
Downloaded From camera-usermanual.com Casio Manuals
273
B
APPENDIX
• Movies
Image
Size
(Pixels)
HQ
640
× 480
Normal
640
× 480
LP
320 × 240
Maximum
Recording
Time Per
File
Until memory full
Until memory full
Until memory full
Approximate
Data Rate
(Frame Rate)
Approximate
Recording
Time for Builtin Memory
8.0MB
16 seconds 4.0 megabits per second
(30 frames / second)
2.1 megabits per second
(30 frames / second)
745 kilobits per second
(15 frames / second)
31 seconds
1 minute and
27 seconds
Approximate
Recording
Time for SD
Memory
Card 256MB
8 minutes and 21 seconds
15 minutes and 52 seconds
44 minutes and 17 seconds
* Based on Matsushita Electric Industrial Co., Ltd. products.
Capacity depends on card manufacturer.
* To determine the number of images that can be stored on a memory card of a different capacity, multiply the capacities in the table by the appropriate value.
Delete .................................. Single-file, all files (with protection)
Effective Pixels .................. 8.1 million
Imaging Element ................ 1/1.8-inch square pixel color CCD
(Total pixels: 8.32 million)
Lens/Focal Distance
Lenses ............................. F2.8 (W) to 5.1 (T); f=7.9 (W) to
23.7mm (T) (equivalent to approximately 38 (W) to 114mm (T) for
35mm film)
7 lenses in 5 groups, with aspherical lens
Zoom ................................... 3X optical zoom; 8X digital zoom
(24X in combination with optical zoom)
Focusing ............................. Contrast Detection Auto Focus
Focus Modes: Auto Focus, Macro mode, Pan Focus, Infinity mode, manual focus
AF Area: spot, multi, free; AF Assist
Light
Approximate Focus Range (from lens surface)
Auto Focus ...................... 40cm to
∞ (1.3´ to ∞)
Macro .............................. 10cm to 50cm (3.9˝ to 19.7˝)
Infinity Mode ....................
∞
Manual ............................. 10cm to
∞ (3.9˝ to ∞)
• Using optical zoom causes the above ranges to change.
Downloaded From camera-usermanual.com Casio Manuals
274
B
APPENDIX
Exposure Control
Light Metering ................. Multi-pattern, center-weighted, spot by
CCD
Exposure ......................... Program AE, Shutter Speed Priority
AE, Aperture Priority AE, Manual
Exposure
Exposure Compensation ..... –2EV to +2EV (1/3EV units)
Shutter ................................ CCD electronic shutter; mechanical shutter
Program AE: 1/2 to 1/1600 second
Manual Exposure / Shutter Speed
Priority AE: 60 to 1/1600 second
Aperture Priority AE: 1 to 1/1600 second
• Above shutter speeds do not apply when using a BEST SHOT scene.
Aperture .............................. Program AE/Shutter Speed Priority
AE: F2.8 to 8.0*, auto switching
* Brightness converted
Manual Exposure/Aperture Priority
AE: F2.8/4.0, auto switching
• Using optical zoom causes the aperture to change.
White Balance .................... Auto WB, fixed (6 modes), manual switching
Sensitivity ........................... Snapshots: Auto, ISO 50, ISO 100,
ISO 200, ISO 400
Movies: Auto
Self-timer ............................ 10 seconds, 2 seconds, Triple Selftimer
Built-in Flash
Flash Modes .................... Auto Flash, ON, OFF, High-power
Flash, Soft Flash, Red eye reduction
Flash Range .................... Wide Angle Optical Zoom:
0.1 to 4.3 meters (0.33´ to 14.1´)
Telephoto Optical Zoom:
0.5 to 2.4 meters (1.6´ to 7.9´)
• Flash Continuous Shutter
Wide Angle Optical Zoom:
0.4 to 3.3 meters (1.3´ to 10.8´)
Telephoto Optical Zoom:
0.5 to 1.8 meters (1.6´ to 5.9´)
* ISO Sensitivity: “Auto”
* Depends on zoom factor.
Downloaded From camera-usermanual.com Casio Manuals
275
B
APPENDIX
Recording Functions ....... Snapshot; audio snapshot; macro; selftimer; Continuous shutter (Normalspeed Continuous Shutter, High-speed
Continuous Shutter, Flash Continuous
Shutter, Zoom Continuous Shutter,
Multi Continuous Shutter); BEST
SHOT; movie with audio (Movie,
MOVIE BEST SHOT, Short Movie,
Past Movie) ; voice recording
• Audio recording is monaural.
Audio Recording Time
Audio Snapshot ............... Approximately 30 seconds maximum per image
Voice Recording .............. Approximately 24 minutes with built-in memory
After Recording ............... Approximately 30 seconds maximum per image
Monitor Screen .................. 2.5-inch TFT color LCD
115,200 (480
× 240)
Viewfinder .......................... Monitor screen and optical viewfinder
Timekeeping Functions .... Built-in digital quartz clock
Date and Time ................ Recorded with image data
Auto Calendar ................. To 2049
World Time ...................... City; Date; Time; Summer time;
162 cities in 32 time zones
Input/Output Terminals .... Cradle connector
USB ..................................... USB 2.0 Hi-Speed compatible
Microphone ........................ Monaural
Speaker ............................... Monaural
Downloaded From camera-usermanual.com Casio Manuals
276
B
APPENDIX
■ Power Requirements
Power Requirements ........ Rechargeable lithium ion battery
(NP-40)
× 1
Approximate Battery Life:
The values below indicate the amount of time under the conditions defined below, until power automatically turns off due to battery failure. They do not guarantee that you will be able to achieve this level of operation. Low temperatures shorten battery life.
Operation
Number of Shots (CIPA Standard)*
1
(Recording Time)
Number of Shots, Continuous
Recording*
2
(Recording Time)
Continuous Snapshot Playback* 3
Continuous Movie Recording*
4
Continuous Voice Recording*
5
Approximate Battery Life
440 shots (220 minutes)
950 shots (245 minutes)
420 minutes
200 minutes
500 minutes
Supported Battery: NP-40 (Rated Capacitance: 1230 mAh)
Storage Medium: SD Memory Card
*1 Number of Shots (CIPA Standard)
• Temperature: 23
°C (73°F)
• Monitor Screen: On
• Zoom operation between full wide to full telephoto every 30 seconds, during which two images are recorded, one image with flash; power turned off and back on every time 10 images are recorded.
*2 Continuous Recording Conditions
• Temperature: 23
°C (73°F)
• Monitor screen: On
• Flash: Off
• Image recorded every 15 seconds, alternating full wide-angle and full telephoto zoom
*3 Continuous Snapshot Playback Conditions
• Temperature: 23
°C (73°F)
• Scroll one image about every 10 seconds
*4 Approximate time for continuous movie recording, without using zoom.
*5 Voice recording times are based on continuous recording.
Power Consumption ......... 3.7V DC Approximately 3.7W
Dimensions ........................ 89(W)
× 58.5(H) × 23.7(D) mm
(3.5˝(W)
× 2.3˝(H) × 0.93˝(D))
(excluding projections; 19.9mm (0.78˝) at thinnest part)
Weight ................................. Approximately 130 g (4.6 oz)
(excluding battery and accessories)
Bundled Accessories ........ Rechargeable lithium ion battery (NP-
40); USB cradle (CA-31); Special AC adaptor; AC power cord; USB cable;
AV Cable; Strap; CD-ROM; Basic
Reference
Downloaded From camera-usermanual.com Casio Manuals
277
APPENDIX
■ Rechargeable Lithium Ion Battery (NP-40)
Rated Voltage .................... 3.7 V
Rated Capacitance ............ 1230 mAh
Operating Temperature
Range .................................. 0
°C to 40°C (32°F to 104°F)
Dimensions ........................ 38.5(W)
× 38.0(H) × 9.3(D) mm
(1.53˝(W)
× 1.50˝(H) × 0.37˝(D))
Weight ................................. Approximately 34 g (1.2 oz)
■ USB Cradle (CA-31)
Input/Output Terminals .... Camera connector; USB port; AC adaptor terminal (DC IN 5.3V) /
AV output port (Special mini port,
NTSC / PAL)
Power Consumption ......... 5.3V DC Approximately 3.2W
Dimensions ........................ 107(W)
× 33(H) × 66(D) mm
(4.2˝(W)
× 1.3˝(H) × 2.6˝(D))
(excluding projections)
Weight ................................. Approximately 67 g (2.4 oz)
■ Special AC Adaptor (Inlet Type) (AD-C52G)
Power Requirement .......... 100 to 240V AC, 50/60Hz, 83 mA
Output ................................. 5.3V DC, 650 mA
Dimensions ........................ 50(W)
× 20(H) × 70(D) mm
(2.0˝(W)
× 0.8˝(H) × 2.8˝(D))
(excluding projections and cable)
Weight ................................. Approximately 90 g (3.2 oz)
■ Special AC Adaptor (Plug-in Type) (AD-C52J)
Power Requirement .......... 100 to 240V AC, 50/60Hz, 83mA
Output ................................. 5.3V DC, 650mA
Dimensions ........................ 50(W)
× 18(H) × 70(D) mm
(2.0˝(W)
× 0.7˝(H) × 2.8˝(D))
(excluding projections and cable)
Weight ................................. Approximately 90 g (3.2 oz)
Downloaded From camera-usermanual.com Casio Manuals
278
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
Downloaded From camera-usermanual.com Casio Manuals
MA0 604-C
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 INTRODUCTION
- 2 Unpacking
- 3 Contents
- 10 Features
- 14 Precautions
- 19 QUICK START GUIDE
- 19 First, charge the battery!
- 20 To configure display language and clock settings
- 21 To record an image
- 22 To view a recorded image
- 22 To delete an image
- 23 GETTING READY
- 23 About This Manual
- 24 General Guide
- 24 Camera
- 27 USB Cradle
- 28 Monitor Screen Contents
- 28 REC Modes
- 32 PLAY Mode
- 33 Changing the Contents of the Monitor Screen
- 35 Attaching the Strap
- 35 Power Requirements
- 35 Loading the Rechargeable Battery
- 37 To charge the battery
- 41 To replace the battery
- 42 Power Supply Precautions
- 45 Turning the Camera On and Off
- 47 Configuring Power Saving Settings
- 48 Using the On-screen Menus
- 51 Configuring Display Language and Clock Settings
- 52 To configure display language and clock settings
- 54 BASIC IMAGE RECORDING
- 54 Recording an Image
- 54 Specifying the Recording Mode
- 55 Aiming the Camera
- 56 Recording an Image
- 62 Using the Optical Viewfinder
- 63 Using Zoom
- 63 Optical Zoom
- 65 Digital Zoom
- 67 Using the Flash
- 70 Flash Unit Status
- 71 Changing the Flash Intensity Setting
- 71 Using Flash Assist
- 73 Using the Self-timer
- 76 Specifying Image Size
- 77 Specifying Image Quality
- 79 OTHER RECORDING FUNCTIONS
- 79 Selecting the Focus Mode
- 80 Using Auto Focus
- 83 Using the Macro Mode
- 84 Using Pan Focus
- 85 Using the Infinity Mode
- 85 Using Manual Focus
- 87 Using Focus Lock
- 88 Exposure Compensation (EV Shift)
- 89 Adjusting White Balance
- 91 Configuring the White Balance Setting Manually
- 92 Specifying the Exposure Mode
- 92 Using Aperture Priority AE
- 94 Using Shutter Speed Priority AE
- 96 Setting Exposure Settings Manually
- 97 Exposure Mode Recording Precautions
- 97 Using Continuous Shutter
- 98 Using the Normal-Speed Continuous Shutter Mode
- 99 Using the High-Speed Continuous Shutter Mode
- 99 Using the Flash Continuous Shutter Mode
- 100 Using the Zoom Continuous Shutter Mode
- 101 25-shot Stop Action Images (Using the Multi Continuous Shutter Mode)
- 102 Continuous Shutter Precautions
- 103 Using the BEST SHOT Mode
- 105 Displaying Sample Scenes Individually
- 106 Creating Your Own BEST SHOT Setup
- 108 To delete a BEST SHOT user setup
- 108 Reducing the Effects of Hand or Subject Movement
- 110 Shooting with High Sensitivity
- 111 Recording Images of Business Cards and Documents (Business Shot)
- 112 Before recording with Business Shot
- 112 To use Business Shot
- 113 Restoring an Old Photograph
- 113 Before trying to restore an old photograph
- 114 To restore an old photograph
- 116 Recording an ID Photo
- 118 Printing an ID Photo
- 118 Recording a Movie
- 119 Specifying Movie Image Quality
- 120 Recording a Standard Movie (Movie Mode)
- 123 Instant Movie Setups (MOVIE BEST SHOT Mode)
- 124 Displaying MOVIE BEST SHOT Sample Scenes Individually
- 125 Creating Your Own MOVIE BEST SHOT Setup
- 126 Recording a Short Movie
- 129 Recording a Past Movie
- 130 Shooting with the REC Light
- 131 Recording Audio
- 131 Adding Audio to a Snapshot
- 133 Recording Your Voice
- 134 Using the Histogram
- 137 REC Mode Camera Settings
- 137 Assigning Functions to the [<] and [>] Keys
- 138 Turning the On-screen Grid On and Off
- 139 Turning Image Review On and Off
- 139 Using Icon Help
- 140 Specifying Power On Default Settings
- 142 Specifying ISO Sensitivity
- 143 Selecting the Metering Mode
- 145 Using the Filter Function
- 145 Specifying Outline Sharpness
- 146 Specifying Color Saturation
- 146 Specifying Contrast
- 147 Date Stamping Snapshots
- 148 Resetting the Camera
- 149 Using the Shortcut Menu (EX Menu)
- 150 PLAYBACK
- 150 Basic Playback Operation
- 151 Playing an Audio Snapshot
- 152 Zooming the Display Image
- 153 Resizing an Image
- 154 Cropping an Image
- 156 Keystone Correction
- 157 Using Color Restoration to Correct the Color of an Old Photograph
- 159 Adjusting White Balance of a Recorded Image
- 161 Adjusting Image Brightness
- 162 Playing and Editing a Movie
- 162 Playing a Movie
- 164 Playing Back a Movie with Anti Shake
- 165 Editing a Movie
- 168 Capturing a Still Image from a Movie (MOTION PRINT)
- 170 Displaying the 9-image View
- 171 Displaying the Calendar Screen
- 172 Playing a Slideshow
- 174 Using the Photo Stand Feature
- 175 Rotating the Display Image
- 177 Adding Audio to a Snapshot
- 178 To re-record audio
- 179 Playing Back a Voice Recording File
- 180 Displaying Camera Images on a TV Screen
- 181 Selecting the Video Output System
- 183 DELETING FILES
- 183 Deleting a Single File
- 184 Deleting All Files
- 185 FILE MANAGEMENT
- 185 Folders
- 185 Memory Folders and Files
- 186 Protecting Files
- 186 To protect a single file
- 187 To protect all files in memory
- 187 Using the FAVORITE Folder
- 187 To copy a file to the FAVORITE folder
- 189 To display a file in the FAVORITE folder
- 190 To delete a file from the FAVORITE folder
- 190 To delete all files from the FAVORITE folder
- 191 OTHER SETTINGS
- 191 Configuring Sound Settings
- 191 To configure sound settings
- 191 To set the confirmation tone volume level
- 192 To set the audio volume level for movie and audio snapshot playback
- 192 Specifying an Image for the Startup Screen
- 193 Specifying the File Name Serial Number Generation Method
- 194 Setting the Clock
- 194 To select your Home Time zone
- 195 To set the current time and date
- 195 Changing the Date Format
- 196 Using World Time
- 196 To display the World Time screen
- 196 To configure World Time settings
- 197 Editing the Date and Time of an Image
- 198 Changing the Display Language
- 199 Changing the Brightness of the Monitor Screen
- 200 Changing the USB Port Protocol
- 201 Configuring [ ] (REC) and [ ] (PLAY) Power On/Off Functions
- 202 Formatting Built-in Memory
- 203 USING A MEMORY CARD
- 204 Using a Memory Card
- 204 To insert a memory card into the camera
- 205 To replace the memory card
- 206 Formatting a Memory Card
- 207 Copying Files
- 208 To copy all the files in built-in memory to a memory card
- 209 To copy a specific file from a memory card to built-in memory
- 210 PRINTING IMAGES
- 211 DPOF
- 212 To configure print settings for a single image
- 213 To configure print settings for all images
- 214 Using PictBridge or USB DIRECT-PRINT
- 218 Date Printing
- 219 PRINT Image Matching III
- 219 Exif Print
- 220 VIEWING IMAGES ON A COMPUTER
- 220 Using the Camera with a Windows Computer
- 228 Using the Camera with a Macintosh Computer
- 233 Using a Memory Card to Transfer Images to a Computer
- 234 Memory Data
- 234 DCF Protocol
- 235 Memory Folder Structure
- 236 Image Files Supported by the Camera
- 238 USING THE CAMERA WITH A COMPUTER
- 238 Using the Camera with a Windows Computer
- 238 Selecting the Software You Need
- 240 Computer System Requirements
- 242 Managing Images on a PC
- 245 Retouching, Reorienting, and Printing a Snapshot
- 247 Playing a Movie
- 250 Editing a Movie
- 252 Viewing User Documentation (PDF Files)
- 252 User Registration
- 252 Exiting the Menu Application
- 253 Using the Camera with a Macintosh Computer
- 253 Selecting the Software You Need
- 254 Computer System Requirements
- 255 Managing Images on a Macintosh
- 256 Playing Back a Movie on your Macintosh
- 258 Viewing User Documentation (PDF Files)
- 258 To register as a camera user
- 259 APPENDIX
- 259 Menu Reference
- 262 Indicator Lamp Reference
- 265 Troubleshooting Guide
- 270 If you have problems installing the USB driver...
- 271 Display Messages
- 273 Specifications