User ENGLISH

User ENGLISH
ENGLISH
User's Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and
using the application software. Please read this manual carefully before using your new camera.
Downloaded From camera-usermanual.com Samsung Manuals
Instructions
❾✃ Use this camera in the following order
Set up the
camera driver
Before connecting the camera to a PC, via the
USB cable, you will need to set up the camera
driver. Install the camera driver that is contained in
the Application S/W CD-ROM.(p.96)
Take a picture (p.20)
Take a picture
Insert the
USB cable
Check the
camera’s power
Check
[Removable Disk]
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection
terminal.(p.102)
Check the camera’s power. If the power is turned
off, press the camera button to turn on.
Open Window’s EXPLORER and search for
[Removable Disk].(p.103)
❾➴ If you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓2❾➔
Contents
READY
❾➴Getting to know your camera
❾➴About the icons
❾➴Danger
❾➴Warning
❾➴Caution
❾➴An FCC warning
❾➴System chart
❾➴Identification of features
❾✃Front & Top
❾✃Back & Bottom
❾✃Side/ 5-function button
❾✃Mode dial
❾➴Connecting to a Power Source
❾✃Using the AC power adapter(3.3V 2.0A)
❾✃Using the batteries
❾➴Instructions on how to use the memory card
❾✃Maintenance of the memory card
❾✃Preserving the memory card data
❾➴Inserting the memory card
❾➴Removing the memory card
5
5
6
6
7
7
8
10
10
10
11
11
14
14
15
16
16
16
18
18
RECORDING
❾➴LCD monitor indicator
❾➴Starting the recording mode
❾✃How to use the AUTO mode
❾✃How to use the PROGRAM mode
❾✃How to use the AS mode
❾✃How to use the M mode
❾✃How to use the VOICE RECORDING mode
❾✃How to use the MOVIE CLIP mode
❾✃Pausing while recording a movie clip
(Successive Recording)
❾✃NIGHT SCENE mode
❾✃How to use the SCENE mode
❾➴Things to Watch Out for When Taking
Pictures
❾➴Using the camera buttons to adjust the
camera
19
20
20
21
21
22
22
23
23
24
24
25
26
❾✃POWER button
❾✃SHUTTER button
❾➴ZOOM W/T button
❾➴Voice memo/ UP button
❾➴Macro/ Down button (Focusing)
❾➴Focus lock
❾➴FLASH/ LEFT button
❾➴Self-timer/ Right button
❾➴MENU/ OK button
❾➴+/- button
❾➴ASM button
(Manual & Scene mode button)
❾➴LCD button
❾➴Using the LCD monitor to adjust the
camera settings
❾➴How to use the menu
❾✃Size
❾✃Quality
❾✃Metering
❾✃Continuous shot
❾✃Effect
❾✃Sharpness
❾✃Save/ Load the camera configuration
(MYSET)
❾✃Scene
26
26
26
28
29
30
31
33
34
35
38
40
41
43
43
44
45
45
46
47
48
49
PLAY
❾➴Starting play mode
❾✃Playing back a still image
❾✃Playing back a movie clip
❾✃Playing back a recorded voice
❾➴LCD monitor indicator
❾➴Using the camera buttons to adjust the
camera
❾✃Thumbnail/ Enlargement button
❾✃Voice memo/ Up button
❾✃Play & Pause/ Down button
❾✃LEFT/ RIGHT/ MENU/ OK button
❾✃LCD button
❾✃Delete button
Downloaded From camera-usermanual.com Samsung Manuals
50
50
51
51
52
53
53
54
55
56
56
57
❾➓3❾➔
Contents
❾➴Setting up the play back function using the
LCD monitor
58
❾➴Starting the slide show
61
❾➴Rotating an image
62
❾➴Resize
63
❾➴Protecting images
64
❾➴Deleting all images
65
❾➴DPOF
65
❾➴DPOF : STANDARD
66
❾➴DPOF : INDEX
66
❾➴DPOF : PRINT SIZE
67
❾➴DPOF : CANCEL
67
❾➴COPY TO CARD
68
❾➴PictBridge
69
❾➴PictBridge: Picture Selection
70
❾➴PictBridge: Printing
71
❾➴PictBridge: Print Setting
72
❾➴PictBridge : RESET
73
❾➴Before contacting a service center
❾➴Specifications
SOFTWARE
❾➴Software Notes
❾➴System Requirements
❾➴About the software
❾➴Setting up the application software
❾➴Starting PC Mode
❾➴Removing the USB Driver for
Windows 98SE
❾➴Removable Disk
❾➴Removing the removable disk
❾➴Setting up the USB Driver for MAC
❾➴Using the USB Driver for MAC
❾➴Digimax Viewer 2.1
❾➴Using PhotoImpression
❾➴FAQ
SETUP
❾➴Setup menu
❾➴File name
❾➴Auto power off
❾➴Language
❾➴Formatting a memory card
❾➴Setting up the Date/ Time
❾➴Date type
❾➴Imprinting the recording date
❾➴Function lamp
❾➴Sound
❾➴Selecting an External Device(USB)
❾➴LCD brightness
❾➴Quick view
❾➴Initialization(RESET ALL)
❾➴Setting up the MYCAM menu
❾➴Start up image
❾➴Shutter sound
❾➴Start up sound
❾➴Important notes
❾➴Warning indicator
74
75
76
77
78
79
79
80
80
81
82
82
83
83
84
84
85
85
86
88
Downloaded From camera-usermanual.com Samsung Manuals
❾➓4❾➔
89
92
94
94
95
96
102
105
106
107
108
108
109
110
111
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
❾➴ Prior to using this camera, please read the user manual thoroughly.
❾➴ When you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as Batteries, Memory card etc.) to the A/S center.
❾➴ Please check that the camera is operating properly prior to when you intend to use it
(e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
❾➴ Keep the manual in a safe place.
➃❁Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
➃❁All brand and product names appearing in this manual are registered trademarks of their
respective companies.
About the icons
This manual contains instructions on using this camera that will help you to use this camera
safely and correctly. This will help prevent danger and injury to others.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, may
result in a minor or moderate injury.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓5❾➔
Danger
❾✃ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service Center.
❾✃ Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
❾✃ Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source (batteries or AC Power Adapter).
You must contact your dealer or Samsung Camera Service Center.
Do not continue to use the camera as this may cause a fire or electric shock.
❾✃ Do not insert or drop metallic or inflammable foreign objects into the camera through access
points e.g. the memory card slot and battery chamber.
This may cause a fire or electric shock.
❾✃ Do not operate this camera with wet hands. This could pose a risk of electric shock.
Warning
❾✃ Do not use the flash in close proximity to people or animals.
Positioning the flash too close to your subject’s eyes, may cause eyesight damage.
❾✃ When taking photographs, never point the lens of the camera directly into very strong light.
This may result in permanent damage to your eyesight.
❾✃ For safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
➃❃Swallowing batteries or small camera accessories. If an accident should occur, please
consult a doctor immediately.
➃❃There is the possibility of injury from the camera’s moving parts.
❾✃ Batteries and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
❾✃ Do not recharge non rechargeable batteries. This may cause an explosion.
❾✃ Do not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature.
Exposure to extreme temperatures may adversely affect the camera❾緘s internal components
and could cause a fire.
❾✃ When in use, do not cover the camera or AC Power Adapter.
This may cause heat to build up and distort the camera body or cause a fire.
Always use the camera and its accessories in a well-ventilated area.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓6❾➔
Caution
❾✃ Leaking, overheating, or burst batteries could result in fire or injury.
➃❃Use batteries with the correct specification for the camera.
➃❃Do not short circuit, heat or dispose of batteries in fire.
➃❃Do not insert the batteries with the reverse polarities.
❾✃ Remove the batteries when not planning to use the camera for a long period of time.
Batteries may leak corrosive electrolyte and irreparably damage the camera's components.
❾✃ Do not fire the flash while it is in contact with hands or objects.
Do not touch the flash after using it continuously. It may cause burns.
❾✃ Do not move the camera while it is switched on, if you are using the AC Power Adapter.
After use, always switch off the camera before unplugging the adapter from the wall socket.
Then make sure that any connector cords or cables to other devices are disconnected before
moving the camera. Failure to do so may damage the cords or cables and cause a fire or
electric shock.
An FCC warning
➃❃This device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection
against harmful interference in commercial installation. This equipment generates,
absorbs and can emit radio frequency energy. If it is not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communication.
There is however, no guarantee that interference will not occur in some situations.
Should any interference occur when this device is in operation, please try one or
more of the following measures.
❾✃ Change the location and direction of any aerial.
❾✃ Increase distance between the camera and the affected device.
❾✃ Use a different socket away from the affected device.
❾✃ Please contact a Samsung agent or a radio/ TV engineer.
➃❃This device complies with part 15 of the FCC Rules.
➃❃Changes or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓7❾➔
System chart
Please check that you have the correct contents before using this product. To buy the optional
equipment, contact your nearest Samsung dealer or Samsung service centre.
< Included items >
Pouch
DPOF compatible
printer(see p.65)
User manual
Product warranty
Camera strap
SD memory card
(see p.17)
Rechargeable battery Rechargeable battery
(SNB-2312)
(SBP-1303)
AC cord
Battery charger
(SBC-N1)
AA Alkaline
Batteries
Battery charger
(SBC-L1)
Downloaded From camera-usermanual.com Samsung Manuals
❾➓8❾➔
Software CD
(see p.95)
CR-V3
battery
AC adapter
(SAC-32, 3.3V)
System chart
System Requirements
For Windows
Computer
(see p.94)
PictBridge compatible
printer(see p.69)
➃❃PC with processor better than MMX
Pentium 233MHz (XP : Pentium II 300MHz)
➃❃Windows 98/ 98SE/ 2000/ ME/ XP
➃❃Minimum 32MB RAM (XP : 128MB)
➃❃140MB of available hard-disk space
➃❃USB port
➃❃CD-ROM drive
➃❃800x600 pixels, 16-bit colour display
compatible monitor (24-bit colour display
recommended)
For Macintosh
USB cable
➃❃Power Mac G3 or later
➃❃Mac OS 9.0 ~ 10.2
➃❃Minimum 64MB RAM
➃❃110MB of available hard-disk space
➃❃USB port
➃❃CD-ROM drive
➃❃QuickTime 6.4 or later for Movie Clip
CAUTION
When you connect the camera to a
computer or printer, you have to use the
USB cable supplied with the camera,
or the external devices may not recognise
the camera.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓9❾➔
Identification of features
Front & Top
Mode dial
Power button
Shutter button
Speaker
Flash
Microphone
Function lamp
Viewfinder
Lens
Back & Bottom
Flash indicator lamp(Red)
Autofocus indicator lamp(Green)
Mode dial
Viewfinder
Zoom W button
(Thumbnail)
Zoom T button
(Digital zoom)
+/-, DELETE
button
LCD button
5-function
button
LCD monitor
USB
connection port
Play mode
button
Tripod socket
DC input connection port
ASM(Manual & Scene mode) button
* When using the digital zoom to take a picture, the composition of the picture may be different
depending on whether you are using the LCD monitor or the viewfinder. The picture will be
taken in the composition of the picture as it appears on the LCD monitor.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓10❾➔
Identification of features
Side/ 5-function button
Memory card slot
Voice memo/ UP button
FLASH/
LEFT button
SELF-TIMER/
RIGHT button
MENU/
OK button
Battery chamber cover
MACRO/ DOWN button
Battery chamber
Mode dial
❾✃ You can select the desired working mode by using the mode dial located on the top of the
camera. This digital camera has 8 recording modes. These are listed below.
❾➴ AUTO mode
Please select this mode for quick and easy picture taking
with minimal user interaction.
❾➴ PROGRAM mode
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all
functions except the iris and shutter speed.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓11❾➔
Identification of features
❾➴ AS mode
Aperture priority/ Shutter priority mode
The Aperture and Shutter can be set manually in the AS
mode.
❾➴ M mode
Manual mode
The Aperture value, Shutter speed and various functions can
be set manually in this mode.
❾➴ VOICE RECORDING mode
A voice recording can be recorded for as long as the available
recording time of the memory capacity allows.(Max : 1 hour)
- Voice recording file type : *.wav
❾➴ MOVIE CLIP mode
A movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
- Image size : 640X480, 320X240, 160X120(user selectable)
- Movie clip file type : *.avi
❾➴ NIGHT SCENE mode
This mode is used at night or against a dark background.
❾➴ SCENE mode
Use the menu to easily configure optimal settings for a variety
of shooting situations including portrait, children, landscape,
text, close-up, sunset, dawn, backlight, fireworks, beach
scenes, and snowscape.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓12❾➔
Identification of features
❾✃ Function lamp& Self-timer lamp
Function
Description
Power on
Function lamp blinks and then turns off when the camera is ready to take
a picture
After taking a picture
Function lamp blinks once
While movie recording
While voice recording.
Function lamp blinks at a 1-second interval
For the first 7 seconds, the lamp blinks at 1 second intervals.
For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals.
*The lamp will function while using the self-timer even if the configuration
is set to off the lamp.(Based on 10-second Self-timer; see p. 33)
While the self timer is
functioning
❾✃ Auto focus indicator lamp
Color
Status
Blinking
Green
On
Camera Status
Recording Mode (lightly press the shutter button): Not focused
PC Mode: Transmitting Data
Recording Mode (lightly press the shutter button): Focused.
❾✃ Mode dial lamp
Color
Status
On
Green
Camera Status
Turned off the LCD with the LCD button.
PC Mode: When the USB cable is inserted.
❾✃ Flash indicator lamp
Color
Status
Blinking
Red
On
Camera Status
Flash in the process of charging
Flash ready
❾✃ Mode icons
MODE
AUTO
PROGRAM
AS
M
VOICE RECORDING MOVIE CLIP NIGHT SCENE
PLAY
Icon
SCENE
MODE
PORTRAIT CHILDREN LANDSCAPE TEXT CLOSE UP SUNSET DAWN BACKLIGHT FIREWORKS
BEACH&
SNOW
Icon
Downloaded From camera-usermanual.com Samsung Manuals
❾➓13❾➔
Connecting to a Power Source
❾✃ There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
❾✃ We recommend using batteries for a digital camera (Within a year from the date of
manufacture). The batteries are listed below.
Non rechargeable batteries : AA type
- Alkaline, Ni-Mn, Ni-Zn, Lithium
CR-V3 type - Lithium
Rechargeable batteries
: AA type
- Ni-MH(Samsung SNB-2312 recommended)
Ni-Cd(over 1000mAh)
CR-V3 type - Samsung SBP-1303(Lithium Ion battery)
INFORMATION
Important information about battery usage
❾➴ It is easy to buy alkaline batteries. However, the duration for using batteries varies in
accordance with the battery manufacturer or the photographic conditions.
❾➴ When the camera is not used, turn off the camera power.
❾➴ Do not recharge the non rechargeable batteries. It may cause an explosion.
❾➴ Please remove the batteries if the camera will not be used for long periods. Batteries can
lose power over time and are prone to leaking if kept inside the camera.
❾➴ We recommend high capacity ALKALINE batteries as manganese batteries cannot
deliver sufficient power.
❾➴ Low temperatures (below 0❾➨) can affect the performance of the batteries and you may
experience reduced battery life.
❾➴ Batteries will usually recover at normal temperatures.
❾➴ Do not use old and new batteries at the same time.
❾➴ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
Using the AC power adapter (3.3V 2.0A)
If you have access to a mains supply, using an AC
Adapter (3.3V 2.0A) allows the camera to be used for
long periods of time.
Plug the adapter into the connection point
(DC IN 3.3V) on the camera.
Remove the batteries from the camera when using an
AC adapter.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓14❾➔
Connecting to a Power Source
DANGER
❾➴ Always turn off the power before taking the AC adapter out of the mains supply.
❾➴ As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
❾➴ Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification for
the camera. Failure to do so may affect your warranty.
Using the batteries
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
2. Insert the batteries taking note of the
polarity (+ / -).
[ Inserting the AA type battery ] [ Inserting the CR-V3 type battery ]
3. To close the battery chamber cover, push it until it clicks.
❾✃ There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
The batteries are fully
charged.
Prepare new batteries.
Downloaded From camera-usermanual.com Samsung Manuals
There is no battery capacity.
Replace with new batteries.
❾➓15❾➔
Instructions on how to use the memory card
Maintenance of the memory card
❾➴ Be sure to format the memory card (see p. 78) if you are using a newly purchased memory
for the first time, if it contains data that the camera cannot recognize, or if it contains images
captured with a different camera.
❾➴ Turn off the camera power whenever the memory card is being inserted or removed.
❾➴ Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
❾➴ The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
❾➴ Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
❾➴ Please do not use or store in an environment where there are extremes in temperature.
❾➴ Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
❾➴ Please keep the memory card in its case when not in use.
❾➴ During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
❾➴ Do not use a memory card that is used in another digital camera or memory card reader.
❾➴ Do not use a memory card formatted by another digital camera or memory card reader.
Preserving the memory card data
❾➴ If the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
❾➴ Samsung cannot be held responsible for lost data.
❾➴ It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
❾➴ If there is insufficient memory available : If you press the shutter button for the shot, a [CARD
FULL !] message will appear and the camera will not operate. To optimize the amount of
memory in the camera, replace the memory card or delete unnecessary images stored on
the memory.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓16❾➔
Instructions on how to use the memory card
INFORMATION
❾➴ If you open the battery chamber cover when the camera power is turned on, the power
will turn off automatically.
❾➴ Don’t remove the memory card when the Auto focus lamp(Green) is blinking as this may
cause damage to data in the memory card.
❾✃ The camera can use SD Memory Cards and MMC (Multi Media Card).
Card
pins
Write
protect
switch
Label
[ SD(Secure Digital) memory card ]
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted.
By sliding the switch to the bottom of the SD
memory card, the data will be protected.
By sliding the switch to the top of the SD memory
card, the data protection will be canceled.
Slide the switch to the top of the SD memory
card before taking a picture.
❾✃ When using a 32MB internal memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter.
Mode
STILL IMAGE mode
MOVIE CLIP mode
Quality/ Size
3072
2816
2592
2272
2048
1600
1024
640
640
320
160
SUPER FINE
7
8
10
13
16
26
64
162
-
-
-
FINE
14
16
19
26
32
52
95
205
-
-
-
NORMAL
21
25
30
39
47
65
127
244
-
-
-
30FPS
-
-
-
-
-
-
-
-
44SEC 1MIN 36SEC 5MIN 1SEC
15FPS
-
-
-
-
-
-
-
-
1MIN 13SEC 3MIN 1SEC 8MIN 50SEC
Downloaded From camera-usermanual.com Samsung Manuals
❾➓17❾➔
Inserting the memory card
1. Turn off the camera’s power and pull the battery chamber
cover in the direction of the arrow to open.
2. Have the front of the memory card facing toward the back of
the camera (LCD monitor) and the card pins toward the front
of the camera (lens), and then push the memory card into
the card slot until you hear a click.
3. To close, push the battery chamber cover until you hear a
click.
If the memory card does not slide in smoothly, do not
attempt to insert it by force. Check the direction of insertion,
and then insert it correctly. Do not insert the memory card
the wrong way round. Doing so may damage the memory
card slot.
Removing the memory card
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory
card as shown in the image and release.
2. Remove the memory card and close the battery chamber
cover.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓18❾➔
LCD monitor indicator
❾✃ The LCD monitor displays information about the shooting functions and selections.
➅緘
➄緘
➄緘
➄緘
➅緘
➄緘
➅緘
➅緘
➄緘
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
[ Image & Full Status ]
No.
Description
Icons
1
Battery
p.15
2
Recording mode
p.11~12
p.49
3
Continuous shot
4
Flash
p.31
5
Self-timer
p.33
6
Macro
p.29
7
Metering
p.45
8
Card inserted indicator
9
Auto focus frame
10
Camera shake warning
11
Date/ Time
12
Exposure compensation
p.37
13
White Balance
p.36
AEB
Page
p.45
p.25
2005.01.01 01:00 PM
Downloaded From camera-usermanual.com Samsung Manuals
❾➓19❾➔
LCD monitor indicator
14
ISO
p.35
15
Sharpness
p.47
16
Image quality
p.44
17
Image size
3072, 2816, 2592, 2272, 2048, 1600, 1024, 640
Number of available shots remaining
12
Remaining time (Movie clip/ Voice recording)
00:00:44/ 00:59:00
p.43
18
19
Voice memo
20
Optical zoom/ Digital Zoom rate
p.28
Starting the recording mode
❾✃ How to use the AUTO mode (
)
1. Insert the batteries.(p.15) Insert the batteries taking note
of the polarity (+ / -).
2. Insert the memory card (p.18).
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date/time that is displayed on the LCD monitor is
incorrect, reset the date/time before taking a picture.)
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
[ AUTO mode ]
INFORMATION
❾➴ If the auto focus frame turns to red when you press the shutter button down half way,
it means that the camera cannot focus on the subject. Should this be the case,
the camera is unable to capture an image clearly.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓20❾➔
Starting the recording mode
❾✃ How to use the PROGRAM mode (
)
Selecting the automatic mode will configure the camera
with optimal settings. You can still manually configure all
functions except the iris and shutter speed.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the PROGRAM mode by rotating the mode dial.
6. Press the menu button to configure advanced functions
such as image size (p.43), quality (p.44), metering (p.45),
continuous shooting (p.45), picture effects (p.46),
sharpness(p.47) and MYSET(p.48) settings.
7. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
8. Press the shutter button to capture an image.
[ PROGRAM mode ]
❾✃ How to use the AS mode (
)
The Aperture and Shutter can be set manually in this mode.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the AS mode by rotating the mode dial.
6. Use the ASM, Up/Down/Left/Right buttons to select
Aperture Value and Shutter speed.
* Please see page 38 for details on Aperture and Shutter
speed setting.
7. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
8. Press the shutter button to capture an image.
[ AS mode ]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓21❾➔
Starting the recording mode
❾✃ How to use the M mode (
)
The Aperture and Shutter can be set manually in this mode.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the M mode by rotating the mode dial.
6. Use the ASM, Up/Down/Left/Right buttons to select Aperture
Value and Shutter speed.
* Please see page 39 for details on Aperture and Shutter
speed setting.
7. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
8. Press the shutter button to capture an image.
* If the M mode is selected, a bar to indicate the exposure
value will display on the bottom of the LCD monitor.
(
)
❾✃ How to use the VOICE RECORDING mode (
)
Steps from 1-4 are the same as those for AUTO mode.
5. Select the VOICE RECORDING mode by rotating the
mode dial.
6. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for
as long as the available recording time(Max : 1 hour)
allows. The recording time will be displayed on the LCD
monitor. Voice will still be recorded if the shutter button is
released.
- If you wish to stop recording, press the shutter button
again.
- File type : *.wav
* A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
* The auto focus indicator lamp(Green) blinks during voice
recording.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓22❾➔
[ M mode ]
STANDBY
START:SHUTTER
[ VOICE RECORDING mode ]
Starting the recording mode
❾✃ How to use the MOVIE CLIP mode(
)
Steps from 1-4 are the same as those for AUTO mode.
5. Select the MOVIE CLIP mode by rotating the mode dial.
6. The MOVIE CLIP mode icon and available recording
time will display on the LCD monitor.
7. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
Press the shutter button and movie clips are recorded
[ MOVIE CLIP mode ]
for as long as the available recording time.
Movie clips will still be recorded if the shutter button is released.
Recording time will display on the LCD monitor.
➃❃If you wish to stop recording, press the shutter button again.
➃❃Image size and type are listed below.
- Image size : 640x480, 320 x 240, 160x120(Selectable)
- File type : *.avi
❾✃ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while recording a movie
clip. Using this function, you can record your favorite scenes into a movie clip without having
to create multiple movie clips.
❾➴ Using Successive Recording
Steps from 1-6 are the same as those for MOVIE CLIP mode.
7. Point the camera towards the subject and compose the image by using either the
viewfinder or LCD monitor. Press the shutter button and
movie clips are recorded for as long as the available
recording time. Movie clips will still be recorded if the
shutter button is released.
8. Press the Pause button(
) to pause recording.
9. Press the Pause button(
) again to resume the
recording.
10. If you wish to stop recording, press the shutter button
[ Successive recording of a movie clip ]
again.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓23❾➔
Starting the recording mode
❾✃ NIGHT SCENE mode(
)
This mode is used at night or against a dark background.
It is possible that camera shake will occur. If this is the
case, use a tripod to eliminate this.
Use the ASM, Up/Down/Left/Right buttons to select
Aperture Value and Shutter speed. Please see page 38 for
details on Aperture and Shutter speed setting.
[NIGHT SCENE mode]
❾✃ How to use the SCENE mode (
)
Use the menu to easily configure optimal settings for a variety of shooting situations including
portrait, children, landscape, text, close-up, sunset, dawn, backlight, fireworks, beach scenes,
and snowscape.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the SCENE mode by rotating the mode dial.
6. Press the ASM(Manual & Scene mode) button and use the
Left/Right buttons to select the sub menu.
7. After selecting a desired sub menu, press the ASM(Manual &
Scene mode) button or OK button.
8. The current scene icon is displayed at the top left of the LCD.
9. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
10. Press the shutter button to capture an image.
[ SCENE mode ]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓24❾➔
Things to Watch Out for When Taking Pictures
❾✃ Pressing the shutter button down half way
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
[ Lightly press the shutter button ]
[ Press the shutter button ]
❾✃ The available recording time may vary depending on shooting conditions and camera
settings.
❾✃ When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator (
) may appear on the LCD monitor. In this case, use a tripod,
support the camera on a solid surface or change the flash mode to flash shot mode.
❾✃ Backlight compensated shots: When taking an outdoor shot, avoid facing the sun, as the
image may be dark because of the strong backlight. To take a picture against the sun, please
use the [BACKLIGHT] in the scene shooting mode (see page 49), Fill-in flash (see page 31),
Spot metering (see page 45), or Exposure compensation (see page 37).
❾✃ Avoid obstructing the lens or the flash when you capture an image.
❾✃ As there can be some differences between what is seen through the Viewfinder and the
resulting image when taken at a range closer than 1.5m, it is recommended that you use the
LCD monitor to compose these shots.
❾✃ Using the LCD monitor extensively will drain the batteries.
We recommend turning off the LCD monitor and using the optical viewfinder as often as
possible in order to extend battery life.
❾✃ Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow (such as a
stick or flagpole).
- When the surroundings are dark
Downloaded From camera-usermanual.com Samsung Manuals
❾➓25❾➔
Using the camera buttons to adjust the camera
❾✃ The RECORDING mode function can be set up by using the camera buttons.
POWER button
❾➴ Used for turning the camera’s power on/ off.
To turn on the camera power, press the power button.
❾➴ If there is no operation during the specified time,
the camera’s power will be turned off automatically to save
battery life.
❾➴ Pressing the power button for over 3 seconds will deactivate
the start-up sound and sound function.
SHUTTER button
❾➴ Used for taking an image or recording voice in the
RECORDING mode.
❾➴ In MOVIE CLIP mode :
Pressing the shutter button down fully starts the process for
recording a movie clip. Press the shutter button once and the
movie clip is recorded for as long as the available recording
time in the memory allows. If you wish to stop recording,
press the shutter button again.
❾➴ In STILL IMAGE mode
Pressing the shutter button down halfway activates the auto focus and checks the condition
of the flash. Pressing the shutter button down fully takes the image and stores the relevant
data regarding the shot. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
ZOOM W/T button
❾➴ If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓26❾➔
ZOOM W/T button
❾➴ This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a
total zoom ratio of 15X.
❾➴ TELE Zoom
Optical zoom TELE
Digital zoom TELE
: Pressing the ZOOM T button. This will zoom into the subject i.e.
the subject will appear nearer.
: When the maximum (3X) optical zoom is selected, pressing the
ZOOM T button activates the digital zoom software. Releasing
ZOOM T button stops the digital zooming at the required setting.
Once the maximum digital zoom (5X) is achieved, pressing the
ZOOM T button will have no effect. You can check the digital
zoom rate with the [X1.1 ~ X 5.0] numerical mark next to the
zoom bar.
Pressing the
ZOOM T button
[WIDE zoom]
❾➴ WIDE Zoom
Optical zoom WIDE
Pressing the
ZOOM T button
[TELE zoom]
: Pressing the ZOOM W button. This will zoom out from the
subject i.e. the subject will appear further away. Pressing the
ZOOM W button continuously will set the camera to its minimum
zoom setting i.e. the subject appears at its furthest from the
camera.
Pressing the
ZOOM W button
[TELE zoom]
Digital zoom WIDE
Optical zoom
[Digital zoom 2.0X]
Pressing the
ZOOM W button
[Optical zoom 2X]
[WIDE zoom]
: When the digital zoom is in operation, pressing the ZOOM W
button will reduce the digital zooming in steps.
Releasing ZOOM W button stops digital zooming. Pressing the
ZOOM W button will reduce the digital zoom and then it will
continue to reduce the optical zoom until the minimum setting is
reached.
Digital zoom
Pressing the
ZOOM W button
Pressing the
ZOOM W button
[Digital zoom 5.0X]
[Digital zoom 2.0X]
Downloaded From camera-usermanual.com Samsung Manuals
[TELE zoom]
❾➓27❾➔
ZOOM W/T button
INFORMATION
❾➴ To use the digital zoom the LCD monitor has to be turned on.
❾➴ Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
❾➴ Digital Zoom will not work in Night Scene mode.
❾➴ You may notice a decrease in image quality when using the digital zoom.
❾➴ The zoom function can’t be activated during the movie clip recording.
❾➴ Take care not to touch the lens to avoid taking an unclear image and possibly causing
camera malfunction. If the image is dim, turn the camera power off and on again to modify
the lens position.
❾➴ Take care not to press the lens as this may cause a camera malfunction.
❾➴ When the camera is turned on, take care not to touch the camera’s moving lens parts as
this may cause the resulting image to be dim and unclear.
❾➴ Take care not to touch the lens during zoom operation as this may cause damage.
Voice memo(
)/ UP button
❾✃ While the menu is showing, press the UP button to move up the submenu cursor.
❾✃ When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your voice-over to a stored still image.
❾➴ Recording a voice memo
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE CLIP
and VOICE RECORDING modes.
2. Press the VOICE MEMO(
) button. If the voice memo indicator is displayed on the LCD
monitor, the setting is completed.
STOP:SHUTTER
REC
[ Preparing for Voice Memo ]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓28❾➔
[ Recording Voice Memo ]
Voice memo(
) / UP button
3. Press the shutter button and take a picture. The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the
middle of the sound recording, pressing the shutter button will stop the voice memo.
INFORMATION
❾➴ A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
Macro(
)/ Down button(Focusing)
❾✃ While the menu is showing, press the DOWN button to move from the main menu to a
submenu, or to move down the submenu cursor.
❾✃ When the menu is not showing, you can use the MACRO/ DOWN button to take macro
pictures (within the distance range of 4-80cm).
[ Auto focus ]
[ Macro ]
❾✃ Types of focus modes and focus ranges (W: Wide, T: Tele)
Focus type
Auto
Focus range
80cm ~ Infinity
Macro (
W : 4 ~ 80cm
)
T : 25 ~ 80cm
INFORMATION
❾➴ When the macro mode is selected, it is possible that camera shake will occur.
If this is the case, use a tripod to eliminate this.
❾➴ When you take a picture within 25cm(MACRO focus), select the FLASH OFF mode.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓29❾➔
Macro(
)/ Down button(Focusing)
❾✃ Available focusing method, by recording mode
( O : Selectable , X : Not selectable, ❾➢: Infinity focus range)
Mode
Auto
O
O
O
O
O
O
O
Macro
O
O
O
O
O
O
X
Mode
Auto
O
O
❾➢
X
X
❾➢
❾➢
O
❾➢
O
Macro
X
X
X
O
O
X
X
X
X
X
Focus lock
❾✃ To focus on the subject positioned outside of the center, use the focus lock function.
❾➴ Using the Focus Lock
1. Ensure the subject in the center of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto lights up, it means the camera
is focused on the subject. Be careful not to press the SHUTTER button all the way down to
avoid taking an unwanted pictured.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be canceled.
[ The image to be captured ]
[ Press the SHUTTER button ]
halfway and focus on the subject
Downloaded From camera-usermanual.com Samsung Manuals
❾➓30❾➔
[ Recompose the picture ]
and fully depress the
SHUTTER button
FLASH(
)/ LEFT button
❾✃ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to the left
tab.
❾✃ When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH (
) button.
❾➴ Selecting the flash mode
[ Selecting the Auto flash ]
1. Rotate the MODE DIAL to select a RECORDING mode
with the exception of MOVIE CLIP and VOICE
RECORDING modes.
2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit
the environment.
❾➴ Flash range
Unit : m
AUTOFOCUS
MACRO
ISO
AUTO
WIDE
TELE
WIDE
TELE
0.8~3.0
0.8~2.0
0.25~0.8
0.25~0.8
INFORMATION
❾➴ Using the flash frequently will reduce the life of the batteries.
❾➴ Under normal operating conditions the charging time for the flash is normally within 6
seconds. If the batteries are weak, the charging time will be longer.
❾➴ During the continuous shot, movie clip mode, the flash function will not operate.
❾➴ Take photographs within the flash range.
❾➴ The image quality is not guaranteed if the subject is too close or highly reflective.
❾➴ The LCD monitor is turned off for a while after using the flash to recharge it.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓31❾➔
FLASH (
)/ LEFT button
❾➴ Flash mode indicator
Icon
Flash mode
Description
Auto flash
If the subject or background is dark, the camera flash will operate
automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash will work
automatically and will reduce the red-eye effect by using the redeye reduction function.
Fill in flash
The flash fires regardless of available light.
The intensity of the flash will be controlled, according to the
prevailing conditions. The brighter the background or subject is,
the less intense the flash will be.
Slow synchro
The flash will operate in conjunction with a slow shutter speed in
order to obtain the correct exposure. We recommend using a
tripod for this function. When you take an image in a condition with
poor light, the camera shake warning indicator
(
) will display on the LCD monitor.
Flash off
The flash does not fire. Select this mode when capturing images in
a place or situation where flash photography is prohibited. When
you capture an image in a poorly lit condition, the camera shake
warning indicator (
) will display on the LCD monitor.
❾➴ Available flash mode, by recording mode
O
O
X
X
O
X
X
X
X
X
X
X
X
X
X
O
O
O
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
O
O
O
O
X
X
X
X
X
X
X
X
O
X
X
X
O
O
O
O
O
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
X
Downloaded From camera-usermanual.com Samsung Manuals
❾➓32❾➔
Self-timer(
)/ Right button
❾✃ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the right tab.
❾✃ When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer(
) button. This function is used when the photographer would also like to be in the
image.
❾➴ Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING mode
with the exception of VOICE RECORDING mode.
2. Press the SELF-TIMER button until the desired mode
indicator displays on the LCD monitor.
A 2 second, 10 second or double self-timer icon appears
on the LCD monitor. In Movie Clip mode, only the 10second self-timer will work.
❾➁2SEC self-timer (
)
: Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
❾➁10SEC self-timer (
)
: Pressing the shutter button will allow an interval of 10
seconds before the image is taken.
❾➁Double self-timer (
)
: A picture will be taken after about 10 seconds and 2
[Selecting the 10 SEC self-timer]
seconds later a second picture will be taken. When
using the flash, the 2-second self-timer may be
delayed for longer than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the specified time
has elapsed.
INFORMATION
❾➴ The default is OFF.
❾➴ When taking a picture using the self-timer, the function lamp works as follows:
2 second self-timer setting : The function lamp blinks at 0.25 second interval for
2 seconds.
10 second self-timer setting : The function lamp blinks at 1 second interval for the first
7 seconds. It blinks at 0.25 second interval for the remaining
3 seconds.
❾➴ If you operate the Power button, Mode dial, Play mode button, Self-timer button and
shutter button during the self-timer operation, the self-timer function is cancelled.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓33❾➔
MENU/ OK button
❾✃ MENU button
- When you press the MENU button, a menu related to each camera mode will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected. AUTO, PROGRAM, AS,
M, MOVIE CLIP, NIGHT SCENE and SCENE. There is no menu available when the
VOICE RECORDING mode is selected.
Pressing the
MENU button
SIZE
3072X2304
2816X2112
2592X1944
2272X1704
[ Menu off ]
3072
[ Menu on ]
❾✃ OK button
- When the menu is displayed on the LCD monitor, this button is used for shifting the cursor
to the sub menu or for confirming data.
INFORMATION
❾➴ The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.
( when the green LED next to the viewfinder blinks)
- When there is no battery capacity.
❾➴ When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. capture an image. To capture an image, simply cancel the menu display by
pressing the MENU button.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓34❾➔
+/- button
❾✃ You can use the +/- button to adjust the values for the ISO, white balance and exposure
compensation.
Main menu
Sub menu
ISO
AUTO, 100, 200, 400
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H, FLUORESCENT L,
TUNGSTEN, CUSTOM.
Exposure compensation
-2.0 ~ 0.0 ~ +2.0(0.5EV steps)
Available camera mode
❾✃ ISO: You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
❾➴ Selecting an ISO Sensitivity
1. Press the +/- button, and then use the UP and DOWN
buttons to select the ISO icon(
). The ISO menu bar
will appear as shown.
2. Use the LEFT and RIGHT buttons to select the desired
ISO sensitivity value.
- AUTO
: The camera's sensitivity is
automatically changed by variables
such as lighting value or subject brightness.
- 100, 200, 400 : You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity. However, the image may be
saturated in high luminance. The higher the ISO value, the higher the
camera’s sensitivity to light is and therefore the greater its capacity to
take pictures in dark conditions. However, the noise level in the image
will increase as the ISO value increases, making the image appear
coarse.
3. When you press the +/- button again, the value you set will be saved and ISO setup mode
will end.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓35❾➔
+/- button
❾✃ White balance : The white balance control allows you to adjust the colours to appear more
natural looking.
❾➴ Selecting a White Balance
1. Press the +/- button, and then use the UP and DOWN
buttons to select the white balance icon (
).
The white balance menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to set the white
balance to the desired value. The value you set will be
displayed on the LCD monitor.
AUTO
: The camera automatically
selects the appropriate white balance settings, depending on the
prevailing lighting conditions.
DAYLIGHT
: For taking images outside.
CLOUDY
: For taking images under a cloudy and overcast sky.
Fluorescent H
: For shooting under daylight fluorescent types of three-way
fluorescent lighting.
Fluorescent L
: Shooting under white fluorescent lighting.
TUNGSTEN
: For shooting under tungsten (standard light bulb) lighting.
CUSTOM
: Allows the user to set the white balance according to the shooting
condition.
Different lighting conditions may cause a colour cast on your images.
3. Press the +/- button again. The value you set will be saved and White Balance setup mode
will end.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓36❾➔
+/- button
❾➴ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment.
You can select the most appropriate white balance setting for a given shooting environment
by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the White
Balance and press the OK button.
2. Place a sheet of white paper in front of the camera so
that the LCD monitor shows only white, and then press
the SHUTTER button.
3. Press the OK button and your custom white balance
value is stored.
- The custom white balance value will be applied,
starting with the next picture you take.
- The user configured white balance will be remain
effective until it is overwritten.
[ White paper ]
❾✃ Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the +/- button.
❾➴ Compensating Exposure
1. Press the +/- button, and then use the UP and DOWN
buttons to select the exposure compensation icon (
).
The exposure compensation menu bar will appear as
shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor.
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will close. If you change the exposure
value, the exposure indicator (
) will be displayed on the bottom of the LCD monitor.
* A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD
monitor will appear white or you may not get good pictures.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓37❾➔
ASM button(Manual & Scene mode button)
❾✃ You can use the ASM button to select the Aperture Value and Shutter speed in the Night
scene mode.
❾➴ Using the ASM button in the Night scene mode
1. Rotate the MODE DIAL to select the NIGHT SCENE
mode
2. Press the ASM button and the aperture value or shutter
speed is turned green.
3. Press the UP/DOWN button to select the shutter speed.
The aperture value will be changed automatically.
Press the RIGHT/LEFT button to select the aperture
value. The shutter speed will be changed automatically.
4. Press the ASM button again. The value you set will be saved and the mode will switch to
NIGHT SCENE mode. Press the SHUTTER button to take the picture.
❾✃ You can use the ASM button to select the Aperture Value and Shutter speed in the AS and M
mode.
❾➴ Using the ASM button in the AS mode
1. Rotate the MODE DIAL to select the AS mode
2. Press the ASM button and the aperture value or shutter
speed is turned green.
3. Press the UP/DOWN button to select the shutter
speed(Shutter priority mode) and press the RIGHT/LEFT
button to select the aperture value(Aperture priority
mode).
4. Press the ASM button again. The value you set will be
saved and the mode will switch to AS mode. Press the
SHUTTER button to take the picture.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓38❾➔
ASM button(Manual & Scene mode button)
❾➴ Using the ASM button in the M mode
1. Rotate the MODE DIAL to select the M mode
2. Press the ASM button and the aperture value and
shutter speed is turned green.
3. Press the UP/ DOWN/ LEFT/ RIGHT button to select
the aperture value and shutter speed.
- UP/ DOWN button : selecting the shutter speed
- LEFT/ RIGHT button: selecting the aperture value
4. Press the ASM button again. The value you set will be saved and the mode will switch to
M mode. Press the SHUTTER button to take the picture.
❾✃ Aperture values and shutter speeds changed by zoom scale are listed below.
Supported Aperture Values : AUTO, F2.7 ~ F11
Supported Shutter Speeds : AUTO, 1/2000 ~ 15S
Large
Aperture Value
Small
(Press left button)
(Press right button)
F 2.7
1S
Slow
(Press up button)
Shutter Speed
Downloaded From camera-usermanual.com Samsung Manuals
Fast
(Press down button)
❾➓39❾➔
ASM button(Manual & Scene mode button)
❾✃ You can use the ASM button to select the desired scene in the Scene mode.
❾➴ Using the ASM button in the Scene mode
1. Rotate the MODE DIAL to select the Scene mode
2. Press the ASM button and then a menu will be
displayed as shown alongside. Press the left/right button
to select a desired scene.
- Selectable scene menu :
Portrait, Children, Landscape, Text, Close-up, Sunset,
Dawn, Backlight, Fireworks and Beach & Snow.
Please see page 49 for details on each scene menus
3. Press the ASM or OK button to confirm the selection.
PORTRAIT
LCD button
❾✃ You can check the recording status in the LCD monitor.
Toggle the LCD button in shooting mode (except in voice
recording mode) to display the next LCD information
displayed.
Pressing the
LCD button
Pressing the
LCD button
[ Image & full information ]
[ Image & basic information ]
Pressing the LCD button
❾✃ If the LCD monitor is turned off, the mode dial lamp will light up.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓40❾➔
[ LCD off ]
Using the LCD monitor to adjust the camera settings
❾✃ You can use the menu on the LCD monitor to set up recording functions. In any mode with
the exception of VOICE RECORDING mode, pressing the MENU button displays the menu
on the LCD monitor.
INFORMATION
❾➴ The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.
(when the green LED next to the viewfinder blinks)
- When there is no battery capacity.
❾➴ When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. capture an image. To capture an image, simply cancel the menu display by
pressing the MENU button.
❾✃ The following functions are available, depending on the mode you have selected.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Camera working mode
Page
3072X2304
2816X2112
2592X1944
2272X1704
2048X1536
SIZE
1600X1200
p.43
1024X768
640X480
640X480
320X240
160X120
S. FINE
FINE
QUALITY
NORMAL
p.44
30FPS
15FPS
Downloaded From camera-usermanual.com Samsung Manuals
❾➓41❾➔
Using the LCD monitor to adjust the camera settings
Menu tab
Main menu
METERING
Sub menu
Camera working mode
MULTI
SPOT
Page
p.45
SINGLE
2 SHOTS
SHOOTING
4 SHOTS
p.45
8 SHOTS
AEB
NORMAL
B&W
EFFECT
p.46
SEPIA
RGB
SOFT
SHARPNESS
NORMAL
p.47
VIVID
LOAD
MYSET
MYSET1
MYSET2
SAVE
MYSET3
* Menus are subject to change without prior notice.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓42❾➔
p.48
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode (
).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Press the LEFT
or RIGHT button.
SIZE
3072X2304
2816X2112
2592X1944
2272X1704
3072
Press the LEFT
or RIGHT button.
3072
QUALITY
3072
NOR
METERING
MULTI
SPOT
S.FINE
FINE
NORMAL
3. Use the UP and DOWN buttons to select a sub menu.
Press the UP or
DOWN button.
SIZE
絸緘絸
3072X2304
絸➹絸➝
2816X2112
➙絸絸➝
2592X1944
➜➮絸絸
2272X1704
✯❃❂✽
3072X2304
絸➹絸➝
2816X2112
➙絸絸➝
2592X1944
➜➮絸絸
2272X1704
3072
Press the UP or
DOWN button.
SIZE
絸緘絸
SIZE
絸緘絸
3072X2304
絸➹絸➝
絸➹絸➝
2816X2112
➙絸絸➝
➙絸絸➝
2592X1944
➜➮絸絸
➜➮絸絸
2272X1704
2816
2592
4. Select a sub menu, and then press the OK button.
The value you set will be saved and the menu will disappear.
Size
❾✃ You can select the image size appropriate for your application.
STILL IMAGE mode
Mode
Icon
Size
3072
2816
2592
2272
2048
MOVIE CLIP mode
1600
1024
640
640
320
160
3072X2304 2816X2112 2592X1944 2272X1704 2048X1536 1600X1200 1024X768 640X480 640X480 320X240 160X120
NOR
SIZE
SIZE
3072X2304
2816X2112
2592X1944
2272X1704
3072
[ PROGRAM mode ]
640X480
320X240
160X120
640
[ MOVIE CLIP mode ]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓43❾➔
Size
INFORMATION
❾➴ The higher the resolution, the lower the number of available shots will be because high
resolution images require more memory than lower resolution images.
❾➴ The selectable image sizes in the AUTO mode are listed below.
- P(3072X2304) : For printing the image
- M(1600X1200) : For saving the image to a PC
- E(640X480)
: For sending the image by e-mail
Quality
❾✃ You can select the compression ratio appropriate for your application of the captured images.
The higher the compression ratio, the lower the picture quality.
STILL IMAGE mode
Mode
MOVIE CLIP mode
Icon
30F
15F
Sub menu
S.FINE
FINE
NORMAL
30FPS
15FPS
File Format
jpeg
jpeg
jpeg
avi
avi
2048
3072
2048
640
QUALITY
S.FINE
FINE
NORMAL
[ PROGRAM mode ]
NOR
FRAME RATE
15FPS
30FPS
[ MOVIE CLIP mode ]
INFORMATION
❾➴ S.FINE is the highest quality and NORMAL is the lowest setting.
Choose the setting appropriate for your needs.
❾➴ This file format complies with the DCF(Design rule for Camera File system).
❾➴ JPEG (Joint Photographic Experts Group): JPEG is the image compression standard
developed by the Joint Photographic Experts Group. This type of compression is most
commonly used for compressing photos and graphics because it can compress the files
efficiently without damaging the data.
❾➴ The movie clip frame rate can be varied by subject matter and memory card type. If you
select 640X480 size and 30FPS frame rate, we recommend using an SD memory card.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓44❾➔
Metering
❾✃ If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
MULTI(
SPOT(
) : Exposure will be calculated based on an
average of the available light in the image
3072 2048
area. However, the calculation will be
METERING
biased towards the centre of the image
MULTI
SPOT
area. This is suitable for general use.
) : Only the rectangular area in the center of
the LCD monitor will be metered for light.
This is suitable when the subject in the
center is exposed correctly, regardless of the back lighting.
NOR
INFORMATION
❾➴ The default metering mode is Multi pattern metering.
❾➴ If the subject is not the centre of the focus area, do not use the spot metering as this may
result in an exposure error. In this circumstance, rather use exposure compensation.
Continuous shot
❾✃ Select the number of pictures in continuous shooting.
- [SINGLE]
: Take one picture only
- [2, 4, 8 SHOTS] : Take the set number of pictures with
one push of the shutter. Continuous
shooting mode is cleared after one
shooting.
- [AEB]
: Take three pictures in a series in
different exposures: short exposure
(-0.5EV), standard exposure (0.0EV)
and over exposure (+0.5EV). Use the
mode if it is hard to decide exposure of
the object.
Downloaded From camera-usermanual.com Samsung Manuals
2048
NOR
SHOOTING
SINGLE
2 SHOTS
4 SHOTS
8 SHOTS
[ PROGRAM mode ]
❾➓45❾➔
Continuous shot
❾➴ Available maximum number of continuous shots, by image size/ quality type
quality
(Unit : shot)
S.FINE
FINE
NORMAL
3072X2304
2
2
2
2816X2112
2
2
2
size
2592X1944
2
2
2
2272X1704
2
2
2
2048X1536
2
2
2
1600X1200
4
8
8
1024X768
8
8
8
640X480
8
8
8
* High resolution and picture quality increases file saving time, which increases stand-by time.
* If the [2, 4, 8 SHOTS] or [AEB] sub menu is selected, the flash will be off automatically.
* If you change the image size and quality after selecting the number of continuous shots, the
[SHOOTING] sub menu will be changed to the [SINGLE] automatically.
Effect
❾✃ By using the camera’s digital processor, it is possible to add special effects to your images.
2048
640
2048
EFFECT
NORMAL
B&W
SEPIA
RGB
EFFECT
NOR
[ PROGRAM mode ]
NORMAL
B&W
SEPIA
RGB
NOR
[ MOVIE CLIP mode ]
NORMAL : No effect is added to the image.
B&W
: Converts the image to black and white.
SEPIA
: Captured images will be stored in a sepia tone(a gradient of yellowish brown
colours).
RGB
: Allows the user to adjust the R(Red), G(Green), and B(Blue) values of the
images to be captured.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓46❾➔
Effect
❾➴ Setting RGB Values
1. Select the [RGB] sub menu and then press the OK
button. The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/Down Button: Navigates between R, G, and B
icons.
- Left/Right Button: Changes value of each icon.
3. When you press the OK button, the value you set will be
saved and RGB setup mode will end.
EXIT:SH1
SET:OK
Sharpness
❾✃ You can adjust the sharpness of the picture you want to
take. You cannot check the sharpness effect on the LCD
monitor before you take a picture, because this function is
applied only when the captured image is stored on the
memory.
2048
NOR
SHARPNESS
SOFT
NORMAL
VIVID
[ PROGRAM mode ]
Sub menu
SOFT
NORMAL
Icon
Description
The edges of the image are softened.
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized. The edges will
VIVID
appear sharp, but noise may occur in the recorded image.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓47❾➔
Save/ Load the camera configuration(MYSET)
❾✃ Use the MYSET mode to save frequently used camera settings (SAVE) and use it later (LOAD)
❾➴ Saving the camera configuration: Available in the PROGRAM mode.
1. Rotate the MODE DIAL to select the PROGRAM mode
and press the menu button.
NOR 2048
2. Press the Left/Right buttons to select the [MYSET]
MYSET
menu tap.
LOAD
CANCEL
3. Press the Up/Down buttons to select the [SAVE] menu
SAVE
MYSET1
and press the right button.
MOVE:
CHANGE:
4. Press the Up/Down buttons to select desired MYSET
[PROGRAM mode]
slot number to save.
5. Press the OK button to save the current configuration in
the selected MYSET slot.
❾➴ Loading the saved camera configuration: available in the PROGRAM mode.
1. Rotate the MODE DIAL to select the PROGRAM mode
and press the menu button.
NOR 2048
2. Press the Left/Right buttons to select the [MYSET]
MYSET
menu tap.
LOAD
CANCEL
3. Press the Up/Down buttons to select the [LOAD] menu
SAVE
MYSET1
and press the right button.
MOVE:
CHANGE:
4. Press the Up/Down buttons to select desired MYSET
[PROGRAM mode]
slot number to load.
5. Press the OK button to set the camera configuration as
saved in the MYSET slot.
* The current MYSET slot number is displayed in the top left of the LCD.
* If you select [CANCEL] in the [LOAD] menu, the MYSET mode will be canceled.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓48❾➔
Scene
❾✃ Select the [SCENE] submenu to automatically configure
optimal settings, depending on the selected scene.
Only available in the Scene Mode.
Sub menu
Icon
PORTRAIT
CHILDREN
LANDSCAPE
TEXT
CLOSE UP
SUNSET
DAWN
PORTRAIT
Description
To take picture of a person.
Take a still picture of capturing moving children.
Scenery with green woods or blue sky.
Portrait with scenery background.
Use this mode to shoot a document.
Close-up shooting for small objects such as plants and insects.
Splendor of the setting sun.
Daybreak scenes.
BACKLIGHT
Portrait without shadows caused by back light.
FIREWORKS
Firework scenes.
BEACH &
SNOW
For ocean, lake, and beach scenes and snowscapes.
INFORMATION
❾➴ When close-up, sunset, dawn, fireworks scene mode are selected, it is possible that
camera shake will occur. If you think this will happen, use a tripod.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓49❾➔
Starting play mode
❾✃ If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
❾✃ If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
❾✃ If you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
❾✃ You can turn the power on with the play mode button. The camera is turned on in play mode.
Press the play mode button again to switch to shooting mode.
❾✃ You can set up the PLAY mode function by using the camera buttons and LCD monitor.
❾➴ Playing back a still image
1. Select the PLAY mode by pressing the play
mode button (
).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT/ RIGHT button.
❾➪ Press and hold the Left or Right button to fast
forward the images played.
INFORMATION
❾➴ Even if the camera' s power is off, you can start the play mode by pressing the play mode
button.
❾➴ Lightly press the shutter button in Play mode to switch to the currently set shooting mode
with the mode dial.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓50❾➔
Starting play mode
❾✃ Playing back a movie clip
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded movie clip that you want to play back
by using the LEFT/RIGHT button. If you select a movie
clip, the movie clip indicator (
) will be displayed on
the LCD monitor.
PLAY
4. Press the play & pause button (
) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press the
play & pause button again.
- Pressing the play & pause button again will cause the
movie clip file will restart.
- To rewind the movie clip while it is playing, press the
LEFT button. To fast forward the movie clip, press the
RIGHT button.
- To stop playback of the movie clip, press the play & pause button, and then press the
LEFT or RIGHT button.
❾✃ Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded voice that you want to play back by
using the LEFT/ RIGHT button. If you select a recorded
voice file, the voice indicator (
) will be displayed on
PLAY
the LCD monitor.
4. Press the play & pause button (
) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back,
press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the
LEFT or RIGHT button.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓51❾➔
LCD monitor indicator
❾✃ The LCD monitor displays information about the shooting conditions.
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
➅緘
No.
Description
Icon
Page
1
Battery
2
Play mode
3
File Type
4
Voice memo
p.54
5
Protect indicator
p.64
6
DPOF indicator
p.65
7
Stored image number
p.15
9
❾✃ If you press the LCD button, you can check the following recording information:
SIZE:
AV:
TV:
ISO:
FLASH:
DATE:
3072X2304
F2.7
1/30
100
OFF
2005/01/01
SIZE
AV
TV
ISO
FLASH
: 3072X2304
: F2.7
: 1/30
: 100
: OFF
DATE
: 2005/01/01
Downloaded From camera-usermanual.com Samsung Manuals
❾➓52❾➔
Size
Aperture value
Shutter speed
ISO sensitivity
Whether or not the
flash is used.
Recording date
Using the camera buttons to adjust the camera
❾✃ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Thumbnail(
)/ Enlargement(
) button
❾➴ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
❾➴ Thumbnail display
1. While an image is displayed full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement button.
Pressing the thumbnail
button(
)
Pressing the enlargement
button(
)
Highlighted image
[ Normal display mode ]
[ Thumbnail display mode ]
❾➴Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image enlargement
indicator shown at the bottom left of the LCD monitor.
(If the image is not an enlarged view, the indicator will
not be displayed.) You can also check the area of
enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓53❾➔
Thumbnail(
) /Enlargement(
) button
❾➴ The maximum enlargement rate in proportion to the image size.
Image size
3072
2816
2592
2272/2048
1600
1024
640
Maximum enlargement rate
X10.0
X8.8
X7.3
X6.4
X5.0
X3.2
X2.0
❾➴ Trimming : You can extract part of the image that you want
and save it separately.
TRIMMING?
1. Select an image that you want to enlarge and press the
TRIM
enlargement button.
CANCEL
2. Different parts of the image can be viewed by pressing
CONFIRM:OK
the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Select the submenu values by pressing the UP/DOWN
button and then press the OK button.
TRIM
: trimmed images are saved in their last file names.
CANCEL : cancels trimming.
- If there is little memory space to save the trimmed image, the image can❾緘t be trimmed.
Voice(
) memo/ Up button
❾✃ When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
❾✃ When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your audio to a stored still image.
❾➴ Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button (
) and the voice memo
indicator will display. The camera is now ready to record
a voice memo.
START:SHUTTER
Downloaded From camera-usermanual.com Samsung Manuals
❾➓54❾➔
Voice (
) memo/ Up button
3. Press the shutter button to start recording and voice will
be recorded to the still image for 10 seconds.
While the voice is recording, the recording status
window will be displayed as shown alongside.
4. The recording can be stopped by pressing the shutter
button again.
STOP:SHUTTER
❀✳✱
5. The (
) icon will be displayed on the LCD monitor
after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip and
voice recording files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that already has a voice memo, the
existing voice memo will be erased.
Play & Pause (
)/ Down button
❾✃ In Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode
: Plays a still image with a voice memo, a voice file, or a movie clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
PLAY
[ Voice recording is stopped ]
PAUSE
[ Voice recording is playing ]
Downloaded From camera-usermanual.com Samsung Manuals
PLAY
[ Voice recording is paused ]
❾➓55❾➔
LEFT/ RIGHT/ MENU/ OK button
❾✃ LEFT/ RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab
to the right of the cursor, or to move an secondary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
- OK button
: When the menu is displayed on the LCD monitor, the OK button is used for
confirming data that is changed by using the 5 function button.
LCD(
) button
❾✃ The shooting information will be displayed on the LCD monitor.
The last image stored in the memory is displayed on the
LCD monitor by pressing the play mode button.
Pressing the LCD(
) button in the PLAY mode will
change the display as shown below. [Image & Icons] ❾緘
[Image & Information] ❾緘 [Image only]
Pressing the
LCD button
[ Image & Icons ]
SIZE : 3072X2304
AV : F2.7
TV : 1/30
ISO : 100
FLASH : OFF
DATE : 2005/01/01
Pressing the
LCD button
[ Image & Information ]
Pressing the LCD button
* The LCD button is not available for voice recording in play mode.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓56❾➔
[ Image only ]
Delete(
) button
❾✃ This deletes images stored on the memory card.
❾➴ Deleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT / RIGHT button and press the DELETE( ) button.
2. A message will display as shown alongside on the LCD
monitor.
3. Select the submenu values by pressing the UP/DOWN
button and then press the OK button.
If [DELETE] is selected : deletes the selected images.
If [CANCEL] is selected : cancels “Delete Image”
DELETE?
DELETE
CANCEL
CONFIRM:OK
❾➴ Deleting Images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete,
and then press the DELETE button.
2. The following message will be displayed on the LCD monitor.
Press the
DELETE button.
DELETE?
DELETE
CANCEL
CONFIRM:OK
3. Select the submenu values by pressing the UP/ DOWN button and then press the OK
button.
If [DELETE] is selected : deletes the selected images.
If [CANCEL] is selected : cancels “Delete Image”
INFORMATION
❾➴ Before deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓57❾➔
Setting up the play back function using the LCD monitor
❾✃ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing
the MENU button displays the menu on the LCD monitor. The menus you can set up in Play
mode are as follows. To capture an image after setting up the play menu, press the PLAY button.
Menu tab
Main menu
SLIDE
Sub menu
Secondary menu
INTERVAL
1, 3, 5, 10SEC
REPEAT
OFF/ ON
Page
p. 61
START
ROTATE
RIGHT90
-
LEFT90
-
180
-
HORIZONTAL
-
VERTICAL
-
p. 62
2816X2112
2592X1944
-
2272X1704
-
2048X1536
-
1600X1200
-
1024X768
-
640X480
-
LOGO
-
ONE PIC
UNLOCK/ LOCK
ALL PICS
UNLOCK/ LOCK
NO
-
YES
-
STANDARD
ONE PIC/ ALL PICS
p. 63
RESIZE
PROTECT
p. 64
p. 65
DELETE ALL
INDEX
NO/ YES
SIZE
DEFAULT/ 3X5/ 4X6/ 5X7/ 8X10
CANCEL
STANDARD/ INDEX/ SIZE
NO
-
YES
-
DPOF
COPY TO CARD
p.68
Downloaded From camera-usermanual.com Samsung Manuals
❾➓58❾➔
p. 65
~ p. 67
Setting up the play back function using the LCD monitor
❾✃ This menu is available while the camera is connected to a PictBridge supporting printer
(direct connection to the camera, sold separately) with a USB cable.
Menu tab
Main menu
Sub menu
Secondary menu
SELECT
-
ALL
-
STANDARD
-
INDEX
-
NO
-
YES
-
NO
-
YES
-
IMAGES
Page
p. 70
PRINT
p. 71
DPOF PRINT
p. 71
AUTO SET
p. 72
AUTO
POSTCARD
4X6
SIZE
8.5X11
A6
A4
B5
AUTO
CUSTOM SET
p. 72
INDEX
1
FULL
LAYOUT
2
4
6
8
Downloaded From camera-usermanual.com Samsung Manuals
❾➓59❾➔
Setting up the play back function using the LCD monitor
Menu tab
Main menu
Sub menu
Secondary menu
Page
AUTO
PLAIN
TYPE
PHOTO
FAST PHO.
AUTO
DRAFT
QUALITY
NORMAL
CUSTOM SET
p. 72
FINE
AUTO
DATE
OFF
ON
AUTO
FILE NAME
OFF
ON
NO
-
YES
-
p. 73
RESET
❾➪ Menus are subject to change without prior notice.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓60❾➔
Starting the slide show
❾✃ Images can be displayed continuously at pre-set intervals.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
❾➴ Setting play interval: Set the slide show play interval.
1. Use the Up/Down buttons to select the [INTERVAL] menu
and press the Right button.
2. Use the Up/Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
2048
SLIDE
INTERVAL
REPEAT
START
EXIT:MENU
3 SEC
ON
MOVE:
❾➴ Repeat setting : Repeat or not the slide show after finishing the first cycle.
1. Use the Up/Down buttons to select the [REPEAT] menu and press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[OFF] Selected : The slide show is closed after one cycle.
[ON] selected : The slide show is repeated until canceled.
3. Press the OK button to save the configuration.
❾➴ Start the slide show: The slide show can start only in the [START] menu.
1. Use the Up/Down buttons to select the [START] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
) again to resume the slide show.
- Press the Menu button to stop the slide show.
INFORMATION
❾➴ The loading time depends on the image size and quality.
❾➴ The slide show will start from an image that was displayed on the LCD monitor.
The [PWR SAVE] function can’t be activated.
❾➴ While the slide show is playing, only the first frame of an MOVIE file is displayed.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓61❾➔
Rotating an image
❾✃ You can rotate the stored images by various degrees.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the
[ROTATE] menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
ROTATE
RIGHT90
LEFT90
180
EXIT:MENU
[RIGHT 90] :
Rotate picture in a clock-wise
direction
[LEFT 90] :
Rotate picture in a counterclock-wise direction
[HORIZONTAL] :
Rotate picture horizontally
MOVE:
[180] :
Rotate picture 180 degrees
[VERTICAL] :
Rotate picture vertically
4. Press the OK button. The rotated image will be saved with a new file name and the menu
will disappear. If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓62❾➔
Resize
❾✃ Change the resolution (size) of pictures taken. Select [LOGO] to save an image to be the
start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [RESIZE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
2048
RESIZE
2816X2112
2592X1944
2272X1704
EXIT:MENU
MOVE:
❾➴ Image Resize Types
Resize
2816X2112 2592X1944 2272X1704 2048X1536 1600X1200 1024X768 640X480
LOGO
3072
O
O
O
O
O
O
O
O
2816
X
O
O
O
O
O
O
O
2592
X
X
O
O
O
O
O
O
2272
X
X
X
O
O
O
O
O
2048
X
X
X
X
O
O
O
O
1600
X
X
X
X
X
O
O
O
1024
X
X
X
X
X
X
O
O
640
X
X
X
X
X
X
X
O
INFORMATION
❾➴ A large sized image can be resized to a smaller sized image, but not vice versa.
❾➴ Only JPG images can be resized. MOVIE and WAV files can’t be resized.
❾➴ You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
❾➴ The resized image will have a new file name. The [LOGO] image is stored not on the
memory card but on the internal memory.
❾➴ Only one [LOGO] image can be saved. If you save a new [LOGO] image, the existing
startup image will be deleted.
❾➴ If the memory capacity is insufficient to store the resized image, a [CARD FULL!]
message will display on the LCD monitor and the resized image will not be stored.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓63❾➔
Protecting images
❾✃ This is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
❾➴ Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the
2048
[PROTECT] menu tab.
PROTECT
ONE PIC
3. Select a desired sub menu by pressing the UP/ DOWN
ALL PICS
button and press the OK button.
[ONE PIC] : Only an image that is displayed on the LCD
monitor is protected or unprotected.
[ALL PICS] : All of the stored images are protected or unprotected.
4. Select the desired secondary menu by pressing the
UP/DOWN button and press the OK button.
[UNLOCK] : Cancels the protect function.
[LOCK]
: Sets up the protect function.
- If you select the[ONE PIC] sub menu at step 3, you can
protect or unprotect another image by pressing the
LEFT/ RIGHT button. If you press the SHUTTER button,
the Image Protection menu will disappear.
- If you selected [ALL] in Step 3, the Image Protection
menu will disappear.
- If you protect an image, the protect icon(
) will be
displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from
[DELETE] or [DELETE ALL] functions, but will NOT be
protected from the [FORMAT] function.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓64❾➔
UNLOCK
EXIT:SH1
MOVE PIC:
SET:OK
LOCK
EXIT:SH1
MOVE PIC:
SET:OK
Deleting all images
❾✃ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. Remember that this will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place. The startup image is stored in
the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
❾➴ Deleting all images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DELETE
ALL] menu tab.
DELETE ALL
NO
3. Select a desired sub menu by pressing the UP/ DOWN
YES
button and press the OK button.
Selecting [NO] : cancels “Delete All”
Selecting [YES] : Displays the dialogue box to confirm the
delete.
- If [DELETE] is selected : press the OK button and all unprotected pictures are deleted.
- If [CANCEL] is selected : press the OK button and images are not deleted.
DPOF
❾✃ DPOF(Digital Print Order Format) allows you to embed printing information on your memory
card’s MISC folder. Select the pictures to be printed and how many prints to make.
❾✃ The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
❾✃ This function is not available for Movie clips and Voice recording files.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓65❾➔
DPOF : STANDARD
❾✃ This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [STANDARD] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the UP and DOWN buttons to select [ONE PIC] or
[ALL PICS], and then press the OK button. A window
for selecting number of copies.
[ONE PIC] : Set the number of copies to print for the
current picture only.
[ALL PICS] : Set the number of copies to print for each
picture, excluding movie clips and voice
recordings.
5. Use the UP and DOWN buttons to select the number of
copies and then press the OK button.
- The DPOF icon (
) will appear by the pictures for
which the number of copies to print is set.
DPOF
STANDARD
INDEX
SIZE
ONE PIC
ALL PICS
BACK:
SET:OK
0 PRINTS
EXIT:SH1
MOVE PIC:
SET:OK
DPOF : INDEX
❾✃ Images (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [INDEX] menu by pressing the UP/ DOWN
DPOF
button and press the RIGHT button.
STANDARD
NO
4. Select a desired sub menu by pressing the UP/ DOWN
INDEX
YES
SIZE
button.
BACK:
If [NO] is selected : The image will not be printed in
index format.
If [YES] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
6. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓66❾➔
SET:OK
DPOF : PRINT SIZE
❾✃ You can specify the print size when printing images stored on the memory card.
The [SIZE] menu is available only for DPOF 1.1 compatible printers.
❾➴ Setting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [SIZE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
DPOF
STANDARD
INDEX
SIZE
BACK:
DEFAULT
3X5
4X6
SET:OK
* PRINT SIZE : DEFAULT, 3X5, 4X6, 5X7, 8X10
* The [DEFAULT] print size varies depending on the printer manufacturer.
For your printer's default value, please refer to the user's guide that came with your printer.
DPOF : CANCEL
❾✃ You can cancel the [STANDARD], [INDEX], or [SIZE] settings. Cancel the setting to reset the
value to its default.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [CANCEL] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [STANDARD] is selected : Cancels the standard print setting.
If [INDEX] is selected
: Cancels the index print setting.
If [SIZE] is selected
: Cancels the print size setting.
5. Press the OK button to confirm the setting.
Downloaded From camera-usermanual.com Samsung Manuals
DPOF
INDEX
SIZE
CANCEL
BACK:
STANDARD
INDEX
SIZE
SET:OK
❾➓67❾➔
COPY TO CARD
❾✃ This enables you to copy image files to the memory card.
❾➴ Copying to the Memory Card
1. Press the play mode button and press the menu button.
2. Select the [COPY TO CARD] menu tab by pressing the
LEFT/ RIGHT button.
COPY TO CARD
3. Select a desired sub menu by pressing the UP/ DOWN
NO
button and press the OK button.
YES
- [NO] : The Play mode screen is displayed
- [YES] : All images saved in the internal memory are
copied to the memory card after the [PLEASE WAIT!] message is displayed.
After copying has been completed, the screen will return to play mode.
INFORMATION
❾➴ When this menu is selected without inserting a memory card, you can't select the [COPY
TO CARD] sub menus.
❾➴ If there is not enough space available in the memory card to copy saved images in the
internal memory (32MB), the [COPY TO CARD] command will copy only some of the
images and display [CARD FULL!] message. Then the system will return to the playback
mode. Please be sure to delete any unnecessary images to free up space before
inserting the memory card into the camera.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓68❾➔
PictBridge
❾✃ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
You can set up the following settings from the PictBridge menu.
IMAGES
: Select the pictures to be printed.
PRINTER SETUP
: Setting up printing(AUTO SET/ CUSTOM SET)
PRINT
: Printing pictures
DPOF AUTO PRINT
: Printing the DPOF files
RESET
: Initializing the PictBridge functions
❾➴ Connecting the Camera to a Printer
1. Press the power button to turn the camera power on.
2. In a mode other than Voice Recording mode, press the
3072
MENU button.
SET UP
LAMP
COMPUTER
3. Press the LEFT/ RIGHT button and select [SETUP]
SOUND
PRINTER
menu tab.
USB
4. Select [USB] menu by pressing the UP/ DOWN button
BACK:
SET:OK
and press the RIGHT button.
5. Select [PRINTER] menu by pressing the UP/ DOWN button and press the OK button.
6. Press the menu button twice and the menu will disappear.
7. Use the supplied USB cable to connect the camera to the printer as shown below.
8. Turn on the printer to connect the camera to the printer.
❾➪ If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the
Mode dial lamp(Green) will illuminate and the connection will not be established. In this case,
disconnect the USB cable, and then follow the procedure from Step 2 and onward.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓69❾➔
PictBridge: Picture Selection
❾✃ Select pictures to print
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
IMAGES
the printer. (See p.69)
SELECT
2. The [IMAGES] menu will appear.
ALL
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
MOVE:
SET:OK
When [SELECT] is selected : The PictBridge function will
be applied only to the picture currently displayed.
When [ALL] is selected
: The PictBridge function will be applied to all pictures,
excluding movie clips and voice files.
❾➴ Setting the Number of Copies to Print
- Select [SELECT] or [ALL]. A screen where you can set the number of copies to print will
appear as shown below.
0 PRINTS
0 PRINTS
EXIT:SH1
MOVE PIC:
SET:OK
[ When [SELECT] is selected ]
EXIT:SH1
SET:OK
[ When [ALL] is selected ]
- Press the Up/ Down button to select the number of prints. Maximum 30 prints.
- Use the Left/Right button to select another picture and select the number of prints for
another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓70❾➔
PictBridge: Printing
❾✃ Printing Pictures
1. Connect the camera to your printer. The USB menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.69)
PRINT
STANDARD
2. Use the LEFT and RIGHT buttons to select the [PRINT]
INDEX
menu tab.
3. Use the UP and DOWN buttons to select the desired
MOVE:
SET:OK
submenu value, and then press the OK button.
[STANDARD] : Print the pictures stored in the memory card in set numbers. One picture
is printed on one piece of paper.
[INDEX]
: Print multiple images on one sheet of paper.
4. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[NO IMAGE!] message will be displayed. Press the
shutter button while printing to cancel the printing and
the [IMAGES] menu is displayed.
❾➪ Number of pictures in a index print varies depends on
the printer used.
NOW PRINTING
001/001
EXIT:SH1
❾✃ DPOF PRINT : This allows you to directly print the files with DPOF information.
1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.69)
DPOF PRINT
NO
2. Use the LEFT and RIGHT buttons to select the [DPOF
YES
PRINT] menu tab.
3. Use the UP and DOWN buttons to select the desired
MOVE:
submenu value, and then press the OK button.
[NO] : Cancel the printing
[YES]: Directly print the file with the DPOF information
❾➪ Depending on the manufacturer and printer model, some menus may not be available.
With a printer without supporting the DPOF, the menu is still displayed but not available.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓71❾➔
PictBridge: Print Setting
❾✃ AUTO SET
1. Connect the camera to your printer. The USB menu
must be set to [PRINTER] before you connect the
camera to the printer. (See p.69)
AUTO SET
2. Use the LEFT and RIGHT buttons to select the
NO
[AUTO SET] menu tab.
YES
3. Use the UP and DOWN buttons to select the desired
MOVE:
SET:OK
submenu value, and then press the OK button.
[NO] : [CUSTOM SET] values are kept.
[YES]: All values in the [CUSTOM SET] are automatically changed.
❾✃ CUSTOM SET : You can select the Paper Size, Print Format, Paper Type, Print Quality,
Date Print, and File Name Print menus for printed pictures.
1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.69)
2. Use the LEFT and RIGHT buttons to select the
[CUSTOM SET] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
CUSTOM SET
SIZE
LAYOUT
TYPE
BACK:
AUTO
SET:OK
❾✃ The menus you can set up are as follows:
Menu
SIZE
LAYOUT
TYPE
QUALITY
DATE
FILE NAME
Function
Sub menu
Setting the size of the printing paper
AUTO, POSTCARD, 4x6, 8.5X11, A6, A4, B5
Setting the number of pictures to be printed on a sheet of paper
AUTO, INDEX, 1, FULL 2, 4, 6, 8
Setting the quality of the printing paper
AUTO, PLAIN, PHOTO, FASTPHO.
Setting the quality of the picture to be printed
AUTO, DRAFT, NORMAL, FINE
Setting whether to print the date
AUTO, OFF, ON
Setting whether to print the file name
AUTO, OFF, ON
❾➪ Some menu options are not supported in all manufacturer and printer models.
❾➪ If the setting values are not changed in the automatic/manual setting, the setting values are
automatically kept.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓72❾➔
PictBridge : RESET
❾✃ Initializes user-changed configurations.
1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.69)
2. Use the LEFT and RIGHT buttons to select the [RESET]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
- If [NO] is selected : Settings will not be reset.
- If [YES] is selected : All print and image settings will be reset.
RESET
NO
YES
MOVE:
SET:OK
❾➪ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓73❾➔
Setup menu
❾✃ In this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode.
The items indicated by
Menu tab
are default settings.
Main menu
Sub menu
-
SERIES
-
OFF, 1, 3, 5, 10MIN
-
FILE
PWR SAVE
Secondary menu
RESET
Page
p.75
p.76
ENGLISH
ENGLISH
➦➸絸➣➜絸
A
DEUTSCH
B
DANSK
FRANÇAIS
LANGUAGE
T
Y
P
E
ESPAÑOL
ITALIANO
P”CCK»…
T
Y
P
E
SVENSKA
p.77
BAHASA
PORTU.
DUTCH
FORMAT
DATE&TIME
DATE TYPE
IMPRINT
LAMP
SOUND
NO
-
YES
-
05/01/01 13:00
-
YY/MM/DD
-
MM/DD/YY
-
DD/MM/YY
-
DATE
-
D & TIME
-
OFF
-
ON
-
OFF
-
OFF
-
LOW
-
MEDIUM
-
HIGH
-
Downloaded From camera-usermanual.com Samsung Manuals
❾➓74❾➔
p.78
p.79
p.79
p.80
p.80
p.81
Setup menu
Menu tab
Main menu
USB
LCD
Q.VIEW
RESET
Sub menu
Secondary menu
COMPUTER
-
PRINTER
-
DARK
-
NORMAL
-
BRIGHT
-
OFF, 0.5, 1, 3SEC
-
YES
-
NO
-
Page
p.82
p.82
p.83
p.83
* Menus are subject to change without prior notice.
File name
❾✃ This function allows the user to select the file naming format.
❾➴ Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
FILE
menu tab.
RESET
PWR SAVE
SERIES
3. Select the [FILE] menu by pressing the UP/ DOWN button
LANGUAGE
and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[RESET] : After using the reset function, the next file name will be set from 0001 even
after formatting, deleting all or inserting a new memory card.
[SERIES] : New files are named using numbers that follow the previous sequence,
even when a new memory card is used, or after formatting, or after deleting
all pictures
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓75❾➔
File name
INFORMATION
❾➴ The first stored folder name is 100SSCAM, and the first file name is STA70001.
❾➴ File names are assigned sequentially from STA70001 ❾緘 STA70002 ❾緘 ~ ❾緘 STA79999.
❾➴ The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM ❾緘
101SSCAM ❾緘 ~ ❾緘 999SSCAM.
❾➴ The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
Auto power off
❾✃ This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
❾➴ Setting Power Off
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
FILE
❾❒
3 MIN
PWR SAVE
3. Select the [PWR SAVE] menu by pressing the UP/
❾
LANGUAGE
DOWN button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [OFF] : The power off function will not operate.
[1, 3, 5, 10 MIN] : The power will turn off automatically if not used for the period of time
specified.
5. Press the menu button twice and the menu will disappear.
INFORMATION
❾➴ Even if the batteries or AC adapter are removed and inserted again, the power off setting
will be preserved.
❾➴ Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording or movie clip.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓76❾➔
Language
❾✃ There is a choice of languages that can be displayed on the LCD monitor. Even if the
batteries or AC adapter are removed and inserted again, the language setting will be
preserved.
❾➴ Setting Language
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
FILE
menu tab.
ENGLISH
PWR SAVE
➦➸絸➣➜絸
3. Select the [LANGUAGE] menu by pressing the UP/
LANGUAGE
DEUTSCH
DOWN button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
LANGUAGE sub menu
Type A : English, Korean, German, French, Spanish, Italian, Russian, Portuguese and
Dutch.
Type B : English, S. Chinese, T. Chinese, Danish, Swedish, Thai,
BAHASA(MALAY/ INDONESIAN) and Arabic.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓77❾➔
Formatting a memory card
❾✃ This is used for formatting the memory card. If you run [FORMAT] on the memory card,
all images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
❾✃ If the memory card is not inserted, the internal memory will be formatted.
❾➴ Formatting a Memory Card
1. In any mode other than Voice Recording mode, press the
MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
PWR SAVE
NO
LANGUAGE
YES
3. Select the [FORMAT] menu by pressing the UP/ DOWN
FORMAT
button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : The memory card will not be formatted.
Press the menu button twice and the menu display will disappear.
If [YES] is selected : Select the [FORMAT] menu by pressing the UP/ DOWN button and
press the OK button. A [PLEASE WAIT!] message appears and the
memory card will be formatted. If you ran FORMAT in Play mode,
a [NO IMAGE!] message will appear.
INFORMATION
❾➴ Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can❾緘t recognize or one that has been taken
from another camera.
❾➴ Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a
[CARD ERROR!] message.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓78❾➔
Setting up the Date/ Time
❾✃ You can change the date and time that will be displayed on the captured images.
❾➴ Setting Date/ Time
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
❾❒
menu tab.
LANGUAGE
✙✣ ✘ ✙✚✘ ✙✚
FORMAT
3. Select the [DATE & TIME] menu by pressing the UP/
❾
DATE&TIME
✚✜:✙✙
DOWN button and press the RIGHT button.
SET:OK
BACK:
4. Use the UP, DOWN, LEFT, and RIGHT buttons to select
the desired submenu value, and then press the OK
button.
RIGHT button : Selects the year/ month/ day/ hour/ minute.
LEFT button
: Moves the cursor to the [DATE & TIME] main menu if the cursor is at
the first item of the date and time setup. In all other cases, the cursor will
be shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value.
5. Press the menu button twice and the menu will disappear.
Date type
❾✃ You can change the date type that will be displayed on the captured images.
❾➴ Setting up the Date type
Steps from 1-2 are the same as those for Setting up the
Date/ Time .
3. Select the [DATE TYPE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the UP/DOWN buttons to select the desired submenu
value, and then press the OK button.
- Date type : [YY/MM/DD]/ [MM/DD/YY]/ [DD/MM/YY]
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
3072
SETUP
FORMAT
DATE&TIME
DATE TYPE
BACK:
YY/MM/DD
MM/DD/YY
DD/MM/YY
SET:OK
❾➓79❾➔
Imprinting the recording date
❾✃ There is an option to include DATE/ TIME on still images.
❾➴ Date Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
DATE&TIME DATE
DATE TYPE
D&TIME
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
IMPRINT
OFF
button and press the RIGHT button.
SET:OK
BACK:
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[DATE]
: Only the DATE will be imprinted on the image file.
[D&TIME] : The DATE & TIME will be imprinted on the image file.
[OFF]
: The DATE & TIME will not be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
INFORMATION
❾➴ The Date & Time are imprinted at the bottom right side of the still image.
❾➴ The date will be imprinted as a DATE TYPE setting.
❾➴ TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the
24 hour clock.
❾➴ The imprint function is applied only to still images.
Function lamp
❾✃ You can turn on and off the function lamp located on the front of the camera.
❾➴ Setting the function lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [ON] is selected : The function lamp will light up.
If [OFF] is selected : The function lamp will not light up.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓80❾➔
3072
SETUP
DATE TYPE
IMPRINT
LAMP
BACK:
ON
OFF
SET:OK
Function lamp
❾➴ Description of the Function lamp
Function
Description
During power-on
Function lamp blinks and then turns off when the camera is ready to
take a picture
After an image is captured
Function lamp will blink once.
During voice recording
Function lamp will blink at a 1-second interval.
While recording a movie clip
Function lamp will blink at a 1-second interval.
When the self-timer is
activated
Even if the function lamp is set to OFF, the self-timer lamp will work.
(See page 33.)
Sound
❾✃ If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
❾➴ Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
3072
SETUP
IMPRINT
LAMP
SOUND
BACK:
OFF
LOW
MEDIUM
SET:OK
❾➓81❾➔
Selecting an External Device (USB)
❾✃ You can select an external device to which you want to connect the camera using the USB
cable.
❾➴ Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
LAMP
COMPUTER
SOUND
PRINTER
3. Select the [USB] menu by pressing the UP/ DOWN button
USB
and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[COMPUTER] : Select this if you want to connect the camera to your PC.
Refer to page 105 for instructions on how to connect the camera to your
PC.
[PRINTER] : Select this if you want to connect the camera to your printer.
Refer to page 70 for instructions on how to connect the camera to your
printer.
5. Press the menu button twice and the menu will disappear.
LCD brightness
❾✃ You can adjust the LCD brightness.
❾➴ Adjusting LCD Brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[LCD] sub menu : DARK, NORMAL, BRIGHT
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓82❾➔
3072
SETUP
SOUND
USB
LCD
BACK:
DARK
NORMAL
BRIGHT
SET:OK
Quick view
❾✃ If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is
possible only with still images.
❾➴ Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
USB
LCD
0.5 SEC
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
Q.VIEW
button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF]
: The quick view function can’t be activated.
[0.5, 1, 3SEC] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
Initialization(RESET ALL)
❾✃ All camera menu and function settings will be restored to their default values.
However, values for DATE/ TIME and LANGUAGE will not be changed.
❾➴ Initializing the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
LCD
YES
Q.VIEW
NO
3. Select the [RESET] menu by pressing the UP/ DOWN
RESET
button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [YES] is selected : All settings will be restored to their defaults.
If [NO] is selected : Settings will not be restored to their defaults.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓83❾➔
Setting up the MYCAM menu
❾✃ You can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MyCAM menu.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Page
OFF
IMAGE 1
IMAGE 2
USER IMAGE
OFF
SH.SOUND 1
SH.SOUND 2
SH.SOUND 3
OFF
SOUND 1
SOUND 2
SOUND 3
S.IMAGE
p.84
SH.SOUND
p.85
S.SOUND
p.85
* Menus are subject to change without prior notice.
Start up image
❾✃ You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
❾➴ Setting a Startup Image
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
3072
MYCAM
S.IMAGE
SH.SOUND
S.SOUND
BACK:
SET:OK
INFORMATION
❾➴ Use a saved image for the start-up image with the [LOGO] in the [RESIZE] menu in the
play mode.
❾➴ The start-up image will not be deleted by deleting all images or [FORMAT] menu.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓84❾➔
Shutter sound
❾✃ You can select the shutter sound.
❾➴ Selecting the Shutter Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [SH.SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
3072
MYCAM
S.IMAGE
SH.SOUND
S.SOUND
BACK:
OFF
SH.SOUND1
SH.SOUND2
SET:OK
Start up sound
❾✃ You can select the sound that is activated whenever the
camera is turned on.
❾➴ Setting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
3072
MYCAM
S.IMAGE
SH.SOUND
S.SOUND
BACK:
OFF
SOUND1
SOUND2
SET:OK
❾➓85❾➔
Important notes
Be sure to observe the following precautions!
❾✃ This unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
❾✃ Do not let the unit come into contact with dust, vinyl goods, or chemicals, such as
insecticides, for an extended period of time.
❾✃ Sand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas
where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
❾✃ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at
least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory
card. If this happens, turn off the camera and remove the memory card. Wait until the
moisture has dispersed.
❾✃ Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
❾✃ If the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the batteries and the memory card if you do not intend using the
camera for an extended period of time.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓86❾➔
Important notes
❾✃ If the camera is exposed to an electronic interference, it will turn itself off to protect the
memory card.
❾✃ Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell
of the camera and also affect its performance. Rough handling can damage the LCD
monitor. Take care to avoid damage and keep the camera in its protective carry case at all
times when not in use.
❾✃ Do not attempt to disassemble or modify the camera.
❾✃ Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to
the camera and is not a malfunction.
❾✃ When images are uploaded or downloaded, the data transfer may be affected by static
electricity. In this case, disconnect and re-connect the USB cable before trying the transfer
again.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓87❾➔
Warning indicator
There are several warnings that may appear on the LCD display
Warning indicator
Causes
- Memory card error
- Turn off the camera power and turn it on
again
- Insert the memory card again
- Format the memory card (p.78)
- There is insufficient memory
capacity to take an image
- Insert a new memory card
CARD ERROR !
CARD FULL !
NO IMAGE !
FILE ERROR !
LOW BATTERY !
CARD LOCKED !
Remedy
- Delete unnecessary image files to free up
some memory
- There are no images stored
on the memory card
- Take images
- Insert a memory card that is holding some
images
- File error
- Memory card error
- Format the memory card
- Contact a camera service center
- There is low battery capacity
- Insert fresh batteries
- The memory card is locked
- Slide the write protect switch to the top of
the memory card
LOW LIGHT !
- When taking pictures in dark
places
- Use a tripod and take pictures in Flash
Photography mode
- [USB] sub menu and
connected device are not
matched.
- Reconfigure [USB] in the [SETUP] menu.
SET USB
Downloaded From camera-usermanual.com Samsung Manuals
❾➓88❾➔
Before contacting a service center
Please check the following
Symptom
Causes
- Insert fresh batteries
- Connect an AC Power Adapter
The camera
doesn❾緘t switch on
- There is low battery capacity
- An AC Power Adapter is not
connected
- Batteries are inserted
incorrectly with the reverse
polarities
The camera power
ceases whilst in
use
- The batteries are exhausted
- The Camera is turned off
automatically
- The Adapter plug is not
connected securely
- Insert fresh batteries
- Press the power button to reactivate
camera
- Remove and re-insert the plug
- The Camera is being used in
low temperatures
- Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only
remove it in order to take images
- There is insufficient memory
capacity
- The memory card has not
been formatted
- The memory card is
exhausted
- The camera’s power is off
- The batteries are exhausted
- The memory card is locked
- Delete unnecessary image files
Batteries drain
quickly
Camera does not
take images when
pressing the
Shutter button
- Batteries are inserted
incorrectly with the reverse
polarities
The camera
suddenly stops
working while in
use
- The camera was stopped
due to a malfunction
Remedy
- Insert the batteries according to the polarity
marks (+, -)
- Format the memory card (p.78)
- Insert a new memory card
- Turn the camera power on
- Insert fresh batteries
- Refer to [CARD LOCKED!] error message
(p.88)
- Insert the batteries according to the polarity
marks (+, -)
- Remove/ re-insert batteries and switch the
camera on
Downloaded From camera-usermanual.com Samsung Manuals
❾➓89❾➔
Before contacting a service center
Symptom
Causes
Remedy
- A picture was taken within
0.8 m from the subject
without setting an
appropriate macro mode
- Taking a picture beyond the
flash range
- The lens is smudged or dirty
- If the subject is closer than 0.8m, select
macro shot mode
The flash does not
fire
- Flash off mode has been
selected
- Dis-engage flash off mode
- The date and time have
been set incorrectly or the
camera has adopted the
default settings
- Reset the date and time correctly
Incorrect date and
time is displayed
- Camera malfunction
- Remove/ re-insert batteries and switch the
camera on
A card error has
occurred while the
memory card is in
the camera.
- Incorrect memory card
format
- Re-format the memory card (p.78)
The images don't
play back
- Incorrect file name
(Violation of DCF format)
- Do not change the image file name
The images are
unclear
The camera
buttons do not
operate
- Take a picture within the flash range
- Clean the lens
Downloaded From camera-usermanual.com Samsung Manuals
❾➓90❾➔
Before contacting a service center
Symptom
Causes
Remedy
Colour of image is
different to the
original scene
- White balance setting is
incorrect
- Select appropriate White balance
Images are too
bright
- Exposure is excessive
- Reset exposure compensation
- Check the connection
- Turn the camera on
- Insert new batteries or check the adapter
connection
When using the
PC’s explorer, the
[Removable Disk]
file does not show
- Cable connection is incorrect
- The camera is off
- There are no batteries, the
batteries are exhausted or
the AC adapter is not
connected.
- The operating system is not
Windows 98, 98SE, 2000,
ME, XP/ Mac OS 9.0~10.2.
Alternatively the PC does
not support USB
- The camera driver is not
installed
- Install Windows 98, 98SE, 2000, ME,
XP/ Mac OS 9.0~10.2 to PC that supports
USB
- Install a [USB Storage Driver]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓91❾➔
Specifications
Image
Sensor
Type
Effective Pixel
Total Pixel
Focal Length
Lens
F No.
Digital Zoom
Viewfinder
Focusing
Shutter
Optical Viewfinder
LCD Monitor
Type
Range
Type
Speed
Control
Exposure
Compensation
ISO Equivalent
Manual
Flash
Modes
Range
Recharging Time
Sharpness
Effect
White Balance
Voice Recording
Date Imprinting
Still Image
Shooting
Movie Clip
Storage
Media
1/1.8" CCD
Approx. 7.0 Mega-pixel
Approx. 7.2 Mega-pixel
SHD Lens f = 7.7 ~ 23.1mm
(35mm film equivalent : 38~114mm)
F2.7 ~ F4.9
Still Image mode : 1.0X~ 5.0X
Play mode : 1.0X~10.0X (depends on image size)
Real image optical viewfinder
2.0" color TFT LCD
TTL auto focus
Normal : 80cm ~ infinity
Macro : 4~80 cm(Wide), 25~80cm(Tele)
Mechanical and Electronic shutter
15 ~ 1/2,000 sec
Program AE, Aperture priority AE, Shutter Speed priority AE, Manual AE,
Metering: Multi, Spot
❾➜2.0EV(0.5EV steps)
Auto, 100, 200, 400
Shutter Speed : 15 ~ 1/2000 sec. selectable
F No. : F2.7 ~ F4.9 selectable
Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
0.25~3.0m(Wide), 0.25~2.0m(Tele)
About 6.0sec
Soft, Normal, Vivid
Normal, B&W, Sepia, RGB
Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L Tungsten, Custom
Voice Recording (Max. 1hour)
Voice Memo in Still Image (max. 10 sec.)
Date&Time, Date, Off (user selectable)
Modes : Program, Auto, Scene, AS priority, Manual, Voice
Recording, Night
Continuous : Single, Continuous, AEB
Self-timer : 2 sec., 10 sec., Double self timer (10sec. & 2sec)
With audio (recording time : memory capacity dependent)
Size : 640x480, 320x240, 160x120
Frame rate : 30 fps, 15 fps
Pause Function in Movie Clip
Internal : 32MB flash memory
External Memory Slot : SD Card/ MMC
(Up to 512MB guaranteed)
Downloaded From camera-usermanual.com Samsung Manuals
❾➓92❾➔
Specifications
File Format
Image Size
Storage
Capacity
(32MB)
Image Play
Type
Editing
Interface
Power Source
Dimensions (WxHxD)
Weight
Operating Temperature
Operating Humidity
Camera Driver
Software
Application
Special Features
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : AVI (MJPEG)
Audio : WAV
3072 : 3072x2304, 2816 : 2816x2112
2592 : 2592x1944, 2272 : 2272x1704
2048 : 2048x1536, 1600 : 1600x1200
1024 : 1024x768, 640 : 640x480
3072 : Superfine 7, Fine 14, Normal 21
2816 : Superfine 8, Fine 16, Normal 25
2592 : Superfine 10, Fine 19, Normal 30
2272 : Superfine 13, Fine 26, Normal 39
2048 : Superfine 16, Fine 32, Normal 47
1600 : Superfine 26, Fine 52, Normal 65
1024 : Superfine 64, Fine 95, Normal 127
640 : Superfine 162, Fine 205, Normal 244
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Single image, Thumbnails, Slide show, Movie Clip
Trimming, Rotating, Resizing
Digital output connector : USB 1.1
Audio : Mono
DC power input connector : 3.3V
Primary Batteries: 2 x AA alkaline, or CR-V3(Lithium) battery
Secondary Batteries: 2 x Ni-MH(Samsung SNB-2312 recommended),
Samsung SBP-1303(Lithium Ion)
AC Adapter(optional): SAC-32 (DC 3.3V, 2A)
* Included battery may vary depending on sales region.
109.8 x 56.8x 34.1 mm
166g (without batteries and card)
0~40˚C
5~85%
Storage Driver (Windows98/ 98SE)
Arcsoft PhotoImpression, Digimax Viewer
Power Movie Clip(Pause Function in Movie Clip & VGA 30fps),
One touch Manual Function(A/S/M Button), 4cm Macro,
Bright Pilot Lamp(Communication with user), Various Scene
Modes, RGB Color Effect, Voice Recording, Samsung High
Definition(SHD) Lens, Pictbridge Printing, 32MB Internal
Memory
* Specifications are subject to change without prior notice.
* All trademarks are the property of their respective owners.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓93❾➔
Setup menu
❾✃ In this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode.
The items indicated by
Menu tab
are default settings.
Main menu
Sub menu
-
SERIES
-
OFF, 1, 3, 5, 10MIN
-
FILE
PWR SAVE
Secondary menu
RESET
Page
p.75
p.76
ENGLISH
ENGLISH
➦➸絸➣➜絸
A
DEUTSCH
B
DANSK
FRANÇAIS
LANGUAGE
T
Y
P
E
ESPAÑOL
ITALIANO
P”CCK»…
T
Y
P
E
SVENSKA
p.77
BAHASA
PORTU.
DUTCH
FORMAT
DATE&TIME
DATE TYPE
IMPRINT
LAMP
SOUND
NO
-
YES
-
05/01/01 13:00
-
YY/MM/DD
-
MM/DD/YY
-
DD/MM/YY
-
DATE
-
D & TIME
-
OFF
-
ON
-
OFF
-
OFF
-
LOW
-
MEDIUM
-
HIGH
-
Downloaded From camera-usermanual.com Samsung Manuals
❾➓74❾➔
p.78
p.79
p.79
p.80
p.80
p.81
Setup menu
Menu tab
Main menu
USB
LCD
Q.VIEW
RESET
Sub menu
Secondary menu
COMPUTER
-
PRINTER
-
DARK
-
NORMAL
-
BRIGHT
-
OFF, 0.5, 1, 3SEC
-
YES
-
NO
-
Page
p.82
p.82
p.83
p.83
* Menus are subject to change without prior notice.
File name
❾✃ This function allows the user to select the file naming format.
❾➴ Assigning File Names
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
FILE
menu tab.
RESET
PWR SAVE
SERIES
3. Select the [FILE] menu by pressing the UP/ DOWN button
LANGUAGE
and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[RESET] : After using the reset function, the next file name will be set from 0001 even
after formatting, deleting all or inserting a new memory card.
[SERIES] : New files are named using numbers that follow the previous sequence,
even when a new memory card is used, or after formatting, or after deleting
all pictures
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓75❾➔
File name
INFORMATION
❾➴ The first stored folder name is 100SSCAM, and the first file name is STA70001.
❾➴ File names are assigned sequentially from STA70001 ❾緘 STA70002 ❾緘 ~ ❾緘 STA79999.
❾➴ The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM ❾緘
101SSCAM ❾緘 ~ ❾緘 999SSCAM.
❾➴ The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
Auto power off
❾✃ This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
❾➴ Setting Power Off
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
FILE
❾❒
3 MIN
PWR SAVE
3. Select the [PWR SAVE] menu by pressing the UP/
❾
LANGUAGE
DOWN button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [OFF] : The power off function will not operate.
[1, 3, 5, 10 MIN] : The power will turn off automatically if not used for the period of time
specified.
5. Press the menu button twice and the menu will disappear.
INFORMATION
❾➴ Even if the batteries or AC adapter are removed and inserted again, the power off setting
will be preserved.
❾➴ Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording or movie clip.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓76❾➔
Language
❾✃ There is a choice of languages that can be displayed on the LCD monitor. Even if the
batteries or AC adapter are removed and inserted again, the language setting will be
preserved.
❾➴ Setting Language
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
SETUP
2. Press the LEFT/ RIGHT button and select the [SETUP]
FILE
menu tab.
ENGLISH
PWR SAVE
➦➸絸➣➜絸
3. Select the [LANGUAGE] menu by pressing the UP/
LANGUAGE
DEUTSCH
DOWN button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
LANGUAGE sub menu
Type A : English, Korean, German, French, Spanish, Italian, Russian, Portuguese and
Dutch.
Type B : English, S. Chinese, T. Chinese, Danish, Swedish, Thai,
BAHASA(MALAY/ INDONESIAN) and Arabic.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓77❾➔
Formatting a memory card
❾✃ This is used for formatting the memory card. If you run [FORMAT] on the memory card,
all images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
❾✃ If the memory card is not inserted, the internal memory will be formatted.
❾➴ Formatting a Memory Card
1. In any mode other than Voice Recording mode, press the
MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
PWR SAVE
NO
LANGUAGE
YES
3. Select the [FORMAT] menu by pressing the UP/ DOWN
FORMAT
button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : The memory card will not be formatted.
Press the menu button twice and the menu display will disappear.
If [YES] is selected : Select the [FORMAT] menu by pressing the UP/ DOWN button and
press the OK button. A [PLEASE WAIT!] message appears and the
memory card will be formatted. If you ran FORMAT in Play mode,
a [NO IMAGE!] message will appear.
INFORMATION
❾➴ Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can❾緘t recognize or one that has been taken
from another camera.
❾➴ Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a
[CARD ERROR!] message.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓78❾➔
Setting up the Date/ Time
❾✃ You can change the date and time that will be displayed on the captured images.
❾➴ Setting Date/ Time
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
❾❒
menu tab.
LANGUAGE
✙✣ ✘ ✙✚✘ ✙✚
FORMAT
3. Select the [DATE & TIME] menu by pressing the UP/
❾
DATE&TIME
✚✜:✙✙
DOWN button and press the RIGHT button.
SET:OK
BACK:
4. Use the UP, DOWN, LEFT, and RIGHT buttons to select
the desired submenu value, and then press the OK
button.
RIGHT button : Selects the year/ month/ day/ hour/ minute.
LEFT button
: Moves the cursor to the [DATE & TIME] main menu if the cursor is at
the first item of the date and time setup. In all other cases, the cursor will
be shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value.
5. Press the menu button twice and the menu will disappear.
Date type
❾✃ You can change the date type that will be displayed on the captured images.
❾➴ Setting up the Date type
Steps from 1-2 are the same as those for Setting up the
Date/ Time .
3. Select the [DATE TYPE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the UP/DOWN buttons to select the desired submenu
value, and then press the OK button.
- Date type : [YY/MM/DD]/ [MM/DD/YY]/ [DD/MM/YY]
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
3072
SETUP
FORMAT
DATE&TIME
DATE TYPE
BACK:
YY/MM/DD
MM/DD/YY
DD/MM/YY
SET:OK
❾➓79❾➔
Imprinting the recording date
❾✃ There is an option to include DATE/ TIME on still images.
❾➴ Date Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
DATE&TIME DATE
DATE TYPE
D&TIME
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
IMPRINT
OFF
button and press the RIGHT button.
SET:OK
BACK:
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[DATE]
: Only the DATE will be imprinted on the image file.
[D&TIME] : The DATE & TIME will be imprinted on the image file.
[OFF]
: The DATE & TIME will not be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
INFORMATION
❾➴ The Date & Time are imprinted at the bottom right side of the still image.
❾➴ The date will be imprinted as a DATE TYPE setting.
❾➴ TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the
24 hour clock.
❾➴ The imprint function is applied only to still images.
Function lamp
❾✃ You can turn on and off the function lamp located on the front of the camera.
❾➴ Setting the function lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [ON] is selected : The function lamp will light up.
If [OFF] is selected : The function lamp will not light up.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓80❾➔
3072
SETUP
DATE TYPE
IMPRINT
LAMP
BACK:
ON
OFF
SET:OK
Function lamp
❾➴ Description of the Function lamp
Function
Description
During power-on
Function lamp blinks and then turns off when the camera is ready to
take a picture
After an image is captured
Function lamp will blink once.
During voice recording
Function lamp will blink at a 1-second interval.
While recording a movie clip
Function lamp will blink at a 1-second interval.
When the self-timer is
activated
Even if the function lamp is set to OFF, the self-timer lamp will work.
(See page 33.)
Sound
❾✃ If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
❾➴ Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
3072
SETUP
IMPRINT
LAMP
SOUND
BACK:
OFF
LOW
MEDIUM
SET:OK
❾➓81❾➔
Selecting an External Device (USB)
❾✃ You can select an external device to which you want to connect the camera using the USB
cable.
❾➴ Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
LAMP
COMPUTER
SOUND
PRINTER
3. Select the [USB] menu by pressing the UP/ DOWN button
USB
and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[COMPUTER] : Select this if you want to connect the camera to your PC.
Refer to page 105 for instructions on how to connect the camera to your
PC.
[PRINTER] : Select this if you want to connect the camera to your printer.
Refer to page 70 for instructions on how to connect the camera to your
printer.
5. Press the menu button twice and the menu will disappear.
LCD brightness
❾✃ You can adjust the LCD brightness.
❾➴ Adjusting LCD Brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[LCD] sub menu : DARK, NORMAL, BRIGHT
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓82❾➔
3072
SETUP
SOUND
USB
LCD
BACK:
DARK
NORMAL
BRIGHT
SET:OK
Quick view
❾✃ If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is
possible only with still images.
❾➴ Setting Quick View
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
USB
LCD
0.5 SEC
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
Q.VIEW
button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF]
: The quick view function can’t be activated.
[0.5, 1, 3SEC] : The captured image is briefly displayed during the selected time.
5. Press the menu button twice and the menu will disappear.
Initialization(RESET ALL)
❾✃ All camera menu and function settings will be restored to their default values.
However, values for DATE/ TIME and LANGUAGE will not be changed.
❾➴ Initializing the Camera
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
3072
2. Press the LEFT/ RIGHT button and select the [SETUP]
SETUP
menu tab.
LCD
YES
Q.VIEW
NO
3. Select the [RESET] menu by pressing the UP/ DOWN
RESET
button and press the RIGHT button.
SET:OK
BACK:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [YES] is selected : All settings will be restored to their defaults.
If [NO] is selected : Settings will not be restored to their defaults.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓83❾➔
Setting up the MYCAM menu
❾✃ You can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MyCAM menu.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Page
OFF
IMAGE 1
IMAGE 2
USER IMAGE
OFF
SH.SOUND 1
SH.SOUND 2
SH.SOUND 3
OFF
SOUND 1
SOUND 2
SOUND 3
S.IMAGE
p.84
SH.SOUND
p.85
S.SOUND
p.85
* Menus are subject to change without prior notice.
Start up image
❾✃ You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
❾➴ Setting a Startup Image
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
3072
MYCAM
S.IMAGE
SH.SOUND
S.SOUND
BACK:
SET:OK
INFORMATION
❾➴ Use a saved image for the start-up image with the [LOGO] in the [RESIZE] menu in the
play mode.
❾➴ The start-up image will not be deleted by deleting all images or [FORMAT] menu.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓84❾➔
Shutter sound
❾✃ You can select the shutter sound.
❾➴ Selecting the Shutter Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [SH.SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
3072
MYCAM
S.IMAGE
SH.SOUND
S.SOUND
BACK:
OFF
SH.SOUND1
SH.SOUND2
SET:OK
Start up sound
❾✃ You can select the sound that is activated whenever the
camera is turned on.
❾➴ Setting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [S.SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
Downloaded From camera-usermanual.com Samsung Manuals
3072
MYCAM
S.IMAGE
SH.SOUND
S.SOUND
BACK:
OFF
SOUND1
SOUND2
SET:OK
❾➓85❾➔
Important notes
Be sure to observe the following precautions!
❾✃ This unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
❾✃ Do not let the unit come into contact with dust, vinyl goods, or chemicals, such as
insecticides, for an extended period of time.
❾✃ Sand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas
where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
❾✃ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at
least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory
card. If this happens, turn off the camera and remove the memory card. Wait until the
moisture has dispersed.
❾✃ Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
❾✃ If the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the batteries and the memory card if you do not intend using the
camera for an extended period of time.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓86❾➔
Important notes
❾✃ If the camera is exposed to an electronic interference, it will turn itself off to protect the
memory card.
❾✃ Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell
of the camera and also affect its performance. Rough handling can damage the LCD
monitor. Take care to avoid damage and keep the camera in its protective carry case at all
times when not in use.
❾✃ Do not attempt to disassemble or modify the camera.
❾✃ Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to
the camera and is not a malfunction.
❾✃ When images are uploaded or downloaded, the data transfer may be affected by static
electricity. In this case, disconnect and re-connect the USB cable before trying the transfer
again.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓87❾➔
Warning indicator
There are several warnings that may appear on the LCD display
Warning indicator
Causes
- Memory card error
- Turn off the camera power and turn it on
again
- Insert the memory card again
- Format the memory card (p.78)
- There is insufficient memory
capacity to take an image
- Insert a new memory card
CARD ERROR !
CARD FULL !
NO IMAGE !
FILE ERROR !
LOW BATTERY !
CARD LOCKED !
Remedy
- Delete unnecessary image files to free up
some memory
- There are no images stored
on the memory card
- Take images
- Insert a memory card that is holding some
images
- File error
- Memory card error
- Format the memory card
- Contact a camera service center
- There is low battery capacity
- Insert fresh batteries
- The memory card is locked
- Slide the write protect switch to the top of
the memory card
LOW LIGHT !
- When taking pictures in dark
places
- Use a tripod and take pictures in Flash
Photography mode
- [USB] sub menu and
connected device are not
matched.
- Reconfigure [USB] in the [SETUP] menu.
SET USB
Downloaded From camera-usermanual.com Samsung Manuals
❾➓88❾➔
Before contacting a service center
Please check the following
Symptom
Causes
- Insert fresh batteries
- Connect an AC Power Adapter
The camera
doesn❾緘t switch on
- There is low battery capacity
- An AC Power Adapter is not
connected
- Batteries are inserted
incorrectly with the reverse
polarities
The camera power
ceases whilst in
use
- The batteries are exhausted
- The Camera is turned off
automatically
- The Adapter plug is not
connected securely
- Insert fresh batteries
- Press the power button to reactivate
camera
- Remove and re-insert the plug
- The Camera is being used in
low temperatures
- Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only
remove it in order to take images
- There is insufficient memory
capacity
- The memory card has not
been formatted
- The memory card is
exhausted
- The camera’s power is off
- The batteries are exhausted
- The memory card is locked
- Delete unnecessary image files
Batteries drain
quickly
Camera does not
take images when
pressing the
Shutter button
- Batteries are inserted
incorrectly with the reverse
polarities
The camera
suddenly stops
working while in
use
- The camera was stopped
due to a malfunction
Remedy
- Insert the batteries according to the polarity
marks (+, -)
- Format the memory card (p.78)
- Insert a new memory card
- Turn the camera power on
- Insert fresh batteries
- Refer to [CARD LOCKED!] error message
(p.88)
- Insert the batteries according to the polarity
marks (+, -)
- Remove/ re-insert batteries and switch the
camera on
Downloaded From camera-usermanual.com Samsung Manuals
❾➓89❾➔
Before contacting a service center
Symptom
Causes
Remedy
- A picture was taken within
0.8 m from the subject
without setting an
appropriate macro mode
- Taking a picture beyond the
flash range
- The lens is smudged or dirty
- If the subject is closer than 0.8m, select
macro shot mode
The flash does not
fire
- Flash off mode has been
selected
- Dis-engage flash off mode
- The date and time have
been set incorrectly or the
camera has adopted the
default settings
- Reset the date and time correctly
Incorrect date and
time is displayed
- Camera malfunction
- Remove/ re-insert batteries and switch the
camera on
A card error has
occurred while the
memory card is in
the camera.
- Incorrect memory card
format
- Re-format the memory card (p.78)
The images don't
play back
- Incorrect file name
(Violation of DCF format)
- Do not change the image file name
The images are
unclear
The camera
buttons do not
operate
- Take a picture within the flash range
- Clean the lens
Downloaded From camera-usermanual.com Samsung Manuals
❾➓90❾➔
Before contacting a service center
Symptom
Causes
Remedy
Colour of image is
different to the
original scene
- White balance setting is
incorrect
- Select appropriate White balance
Images are too
bright
- Exposure is excessive
- Reset exposure compensation
- Check the connection
- Turn the camera on
- Insert new batteries or check the adapter
connection
When using the
PC’s explorer, the
[Removable Disk]
file does not show
- Cable connection is incorrect
- The camera is off
- There are no batteries, the
batteries are exhausted or
the AC adapter is not
connected.
- The operating system is not
Windows 98, 98SE, 2000,
ME, XP/ Mac OS 9.0~10.2.
Alternatively the PC does
not support USB
- The camera driver is not
installed
- Install Windows 98, 98SE, 2000, ME,
XP/ Mac OS 9.0~10.2 to PC that supports
USB
- Install a [USB Storage Driver]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓91❾➔
Specifications
Image
Sensor
Type
Effective Pixel
Total Pixel
Focal Length
Lens
F No.
Digital Zoom
Viewfinder
Focusing
Shutter
Optical Viewfinder
LCD Monitor
Type
Range
Type
Speed
Control
Exposure
Compensation
ISO Equivalent
Manual
Flash
Modes
Range
Recharging Time
Sharpness
Effect
White Balance
Voice Recording
Date Imprinting
Still Image
Shooting
Movie Clip
Storage
Media
1/1.8" CCD
Approx. 7.0 Mega-pixel
Approx. 7.2 Mega-pixel
SHD Lens f = 7.7 ~ 23.1mm
(35mm film equivalent : 38~114mm)
F2.7 ~ F4.9
Still Image mode : 1.0X~ 5.0X
Play mode : 1.0X~10.0X (depends on image size)
Real image optical viewfinder
2.0" color TFT LCD
TTL auto focus
Normal : 80cm ~ infinity
Macro : 4~80 cm(Wide), 25~80cm(Tele)
Mechanical and Electronic shutter
15 ~ 1/2,000 sec
Program AE, Aperture priority AE, Shutter Speed priority AE, Manual AE,
Metering: Multi, Spot
❾➜2.0EV(0.5EV steps)
Auto, 100, 200, 400
Shutter Speed : 15 ~ 1/2000 sec. selectable
F No. : F2.7 ~ F4.9 selectable
Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
0.25~3.0m(Wide), 0.25~2.0m(Tele)
About 6.0sec
Soft, Normal, Vivid
Normal, B&W, Sepia, RGB
Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L Tungsten, Custom
Voice Recording (Max. 1hour)
Voice Memo in Still Image (max. 10 sec.)
Date&Time, Date, Off (user selectable)
Modes : Program, Auto, Scene, AS priority, Manual, Voice
Recording, Night
Continuous : Single, Continuous, AEB
Self-timer : 2 sec., 10 sec., Double self timer (10sec. & 2sec)
With audio (recording time : memory capacity dependent)
Size : 640x480, 320x240, 160x120
Frame rate : 30 fps, 15 fps
Pause Function in Movie Clip
Internal : 32MB flash memory
External Memory Slot : SD Card/ MMC
(Up to 512MB guaranteed)
Downloaded From camera-usermanual.com Samsung Manuals
❾➓92❾➔
Specifications
File Format
Image Size
Storage
Capacity
(32MB)
Image Play
Type
Editing
Interface
Power Source
Dimensions (WxHxD)
Weight
Operating Temperature
Operating Humidity
Camera Driver
Software
Application
Special Features
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : AVI (MJPEG)
Audio : WAV
3072 : 3072x2304, 2816 : 2816x2112
2592 : 2592x1944, 2272 : 2272x1704
2048 : 2048x1536, 1600 : 1600x1200
1024 : 1024x768, 640 : 640x480
3072 : Superfine 7, Fine 14, Normal 21
2816 : Superfine 8, Fine 16, Normal 25
2592 : Superfine 10, Fine 19, Normal 30
2272 : Superfine 13, Fine 26, Normal 39
2048 : Superfine 16, Fine 32, Normal 47
1600 : Superfine 26, Fine 52, Normal 65
1024 : Superfine 64, Fine 95, Normal 127
640 : Superfine 162, Fine 205, Normal 244
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Single image, Thumbnails, Slide show, Movie Clip
Trimming, Rotating, Resizing
Digital output connector : USB 1.1
Audio : Mono
DC power input connector : 3.3V
Primary Batteries: 2 x AA alkaline, or CR-V3(Lithium) battery
Secondary Batteries: 2 x Ni-MH(Samsung SNB-2312 recommended),
Samsung SBP-1303(Lithium Ion)
AC Adapter(optional): SAC-32 (DC 3.3V, 2A)
* Included battery may vary depending on sales region.
109.8 x 56.8x 34.1 mm
166g (without batteries and card)
0~40˚C
5~85%
Storage Driver (Windows98/ 98SE)
Arcsoft PhotoImpression, Digimax Viewer
Power Movie Clip(Pause Function in Movie Clip & VGA 30fps),
One touch Manual Function(A/S/M Button), 4cm Macro,
Bright Pilot Lamp(Communication with user), Various Scene
Modes, RGB Color Effect, Voice Recording, Samsung High
Definition(SHD) Lens, Pictbridge Printing, 32MB Internal
Memory
* Specifications are subject to change without prior notice.
* All trademarks are the property of their respective owners.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓93❾➔
Software Notes
Please ensure that you read the instruction manual carefully before use.
➁緘The attached software is a camera driver and image editing software tool for Windows.
➁緘Under no circumstances should all or part of either the software or the user manual be
reproduced.
➁緘Copyrights for software are licensed only for use with a camera.
➁緘In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by inappropriate
use.
➁緘Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is
not covered by the Samsung warranty.
➁緘Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
System Requirements
For Windows
PC with processor better than MMX
For Macintosh
Power Mac G3 or later
Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/ 98SE/ 2000/ ME/ XP
Mac OS 9.0 ~ 10.2
Minimum 32MB RAM (XP : 128MB)
Minimum 64MB RAM
140MB of available hard-disk space
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
800x600 pixels, 16-bit colour display
QuickTime 6.4 or later for Movie Clip
compatible monitor (24-bit colour display
recommended)
Downloaded From camera-usermanual.com Samsung Manuals
❾➓94❾➔
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
❾✃ Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the Application CD.
But you can use the camera with Mac OS 9.0~10.2.
❾✃ Digimax Viewer : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor. You can also copy,
move or delete the images and enlarge/downscale the image sizes with Digimax Viewer.
This software is only compatible with Windows.
❾✃ PhotoImpression : Image editing program.
You can edit or store still images that you download from the camera. This software is only
compatible with Windows.
INFORMATION
❾➴ Be sure to check the system requirements (p.94) before installing the driver.
❾➴ You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓95❾➔
Setting up the application software
To use this camera with a PC, install the application software first. After this has been done,
the stored images in the camera can be moved to the PC and can be edited by an image editing
program.
INFORMATION
❾➴ Close other programs before installing the application software.
❾➴ Before installing the application software, disconnect the USB connection.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. Click the [Install] menu in the Autorun frame.
The camera driver is installed automatically.
[Click!]
2. Camera driver installation is complete.
Click the [Finish] button.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓96❾➔
Setting up the application software
3. A window for which you can select application
software will be displayed. Select the
application program and click the [Install]
button. Refer to page 95 for more information
about the application program.
[Click!]
INFORMATION
❾➴ If you select [Exit] at the step 3, the application program installation will be cancelled.
4. Install Digimax Viewer.
Click [Next >] button.
[Click!]
INFORMATION
❾➴ If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
5. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [No] and the installation
program will be cancelled.
[Click!]
6. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder
you want.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓97❾➔
Setting up the application software
7. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button. If you want to add the
program icons to a different folder, choose
another folder, and then click [Next >] button.
[Click!]
8. Digimax Viewer installation is successfully
completed. Click the [Finish] button to install
PhotoImpression. The system will not reboot
even if the [Yes, I want to restart the computer
now] option is selected.
* The frame 8 may not appear according to the
system requirements.
[Click!]
9. The PhotoImpression installation window will be
displayed as shown alongside.
Click the [OK] button.
[Click!]
10. A Welcome window will be displayed.
Click the [Next >] button.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓98❾➔
Setting up the application software
11. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [No] and the installation
program will be cancelled.
[Click!]
12. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder
you want.
[Click!]
13. The [Select Components] window will appear.
Click [Next >] button.
[Click!]
14. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button. If you want to add the
program icons to a different folder, choose
another folder, and then click [Next >] button.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓99❾➔
Setting up the application software
15. Installation is complete. To apply changes,
you must restart the computer.
Select [Yes, I want to restart my computer
now], and then click [OK].
[Click!]
* The frame 15 may be displayed according to the
system requirements.
Click the [Finish] button to restart the computer.
[Click!]
16. After restarting the computer, connect the PC to the camera with the USB cable.
17. Turn the camera power on. [Found New
Hardware Wizard] will open and the computer
will recognise the camera.
* If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open. If the image viewer
program opens, the camera driver was setup
successfully.
18. If you can see [Removable Disk] under
[My computer], the camera driver installation
was successful. Now you can transfer image
files from the camera to PC via the USB cable.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓100❾➔
Setting up the application software
INFORMATION
❾➴ If you have installed the camera driver, [Found New Hardware Wizard] may not open.
❾➴ On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify
"USB Driver" in the CD supplied.
❾➴ When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
❾➴ Before connecting the camera to the PC, You should first install the camera driver.
❾➴ After installing the camera driver, you have to restart your PC.
❾➴ If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver (p.96) and connect the camera to the PC again.
❾➴ Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.107), and re-install the driver.
2. Refer to FAQ (p.111) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
Downloaded From camera-usermanual.com Samsung Manuals
❾➓101❾➔
Starting PC mode
➃❃If you connect the USB cable to a USB port on your PC and then turn on the power,
the camera will automatically switch to "computer connection mode".
➃❃In this mode, you can download stored images to your PC through the USB cable.
➃❃The LCD monitor is always turned off in PC mode.
➃❃The camera status lamp will blink when the files are transferring via the USB connection.
❾✃ Connecting the camera to a PC
1. Turn the PC power on.
2. Turn the camera power on.
3072
SETUP
3. In any mode other than Voice Recording mode, press
LAMP
COMPUTER
the MENU button.
SOUND
PRINTER
4. Press the LEFT/ RIGHT button and select the [SETUP]
USB
menu tab.
SET:OK
BACK:
5. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
6. Use the UP and DOWN buttons to select [COMPUTER], and then press the OK button.
7. Press the menu button twice and the menu will disappear.
8. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera USB connection terminal.
- Insert the large connector of the USB cable into the USB port of the PC.
- The plugs must be firmly inserted.
❾➪ If you selected [PRINTER] in Step 6,
when you connect the camera to your
printer, the [CONNECTING…]
message will be displayed on the LCD
monitor and the connection will not be
established. In this case, disconnect
the USB cable, and then follow the
procedure from Step 3 and onward.
❾✃ Disconnecting the camera and PC : Refer to page 107(Removing the removable disk).
INFORMATION
❾➴ The camera driver must be installed before using PC mode.
❾➴ To save battery power, it is recommended that you use an AC adapter (Optional) when
connecting the camera to a computer.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓102❾➔
Starting PC Mode
❾✃ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable Disk
→ DCIM → 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓103❾➔
Starting PC Mode
6. Press the right mouse button and a pop-up menu
will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC
monitor and you can copy or move the image files.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓104❾➔
Removing the USB Driver for Windows 98SE
❾✃ To remove the USB driver, refer to the process shown below.
1. Trace [Start → Settings] and click [Control Panel].
2. Double-click [Add/ Remove programs].
3. The [Add/Remove Programs Properties] window
will open. Click [Digimax A7] and click the
[Add/Remove] button.
[Click!]
4. Uninstallation is complete.
Click the [Finish] button and the window will
disappear.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓105❾➔
Removable Disk
❾✃ To use this camera as a Removable Disk, install (p.96) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM → 100SSCAM) can be transferred to the
PC.
INFORMATION
Important information whilst using the Removable Disk
❾➴ The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
❾➴ We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
❾➴ When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory.
❾➴ When you upload a file that is not taken by this camera to Removable Disk, the
[FILE ERROR!] message will be displayed on the LCD monitor in the PLAY mode,
and nothing is displayed in THUMBNAIL mode.
❾➴ The camera status lamp will blink, when a file is
transferred (copy or deletion) between the PC and
the camera. Do not remove the USB cable until the
lamp stops blinking.
To remove the USB cable in Windows
2000/ME/XP, use the [Unplug or Eject Hardware]
icon on the task bar.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓106❾➔
Removing the removable disk
❾✃ Windows 98SE
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp is turned off.
2. Unplug the USB cable.
❾✃ Windows 2000/ ME/ XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp is turned off.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
[Click!]
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
[Click!]
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals
❾➓107❾➔
Removing the removable disk
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
will be removed safely.
7. Unplug the USB cable.
[Click!]
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the
camera driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up.
This camera is compatible with MAC OS 9.0 ~ 10.2.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
INFORMATION
❾➴ For Mac OS 10.0 or later : First complete uploading from computer to camera and then
remove the removable disk with the Extract command
Downloaded From camera-usermanual.com Samsung Manuals
❾➓108❾➔
Digimax Viewer 2.1
❾✃ This software is only compatible with Windows.
1. To open Digimax Viewer, click the [Start →
Programs → Samsung → Digimax Viewer 2.1 →
Digimax Viewer 2.1 ] and Digimax Viewer 2.1 will
then open.
2. If the [Auto Launch] option is selected, this program will be executed automatically by
recognising the camera.
3. You can easily use the Digimax viewer 2.1 program
as it offers a FILE menu and TOOL bar.And, you can
use the pop up menu. Click an image and press the
right mouse button.
Digimax Viewer functions are listed below.
- Basic functions
: Copy, Move, Delete, Rotate, Rename, changing file type, Resize,
Property.
- Advanced functions : Print, Slide show, Export, Sending e-mail, On-line print,
Web album etc.
INFORMATION
❾➴ Before deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
❾➴ Refer to the [Help] menu in Digimax viewer 2.1 for further information.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓109❾➔
Using PhotoImpression
With PhotoImpression, you can edit or store still images that you downloaded from the camera.
This software is only available in Windows version.
To start the program, click [Start → Programs → ArcSoft PhotoImpression → PhotoImpression].
The following screen will appear.
[ Help Button ]
[ Command
Button ]
[ Tool Bar ]
You can use PhotoImpression to perform the following tasks.
❾✃ Command Button
Button
Description
Imports a picture from an album, a source folder, or the camera/ scanner,
or captures screen shots of what is being viewed on the current monitor.
Selects Cut, Resize, Edit Image, Insert Text, Enhance Picture,
Insert Effects, or Layer.
Performs Insert Frame, Insert Borders, Insert Calendar, Insert Greeting
Cards, Insert Template, or Connect with Other Software.
Saves the edited picture, and sends an e-mail or uses it as the background
image.
Outputs the edited picture according to your preferences.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓110❾➔
Using PhotoImpression
❾✃ Tool Bar
Button
Description
Button
Description
Resize Layer
Rotate Layer
Flip Layer Horizontally
Rotate All Layers
Undo
Redo
Copy
Paste
Delete Layer
Close Picture
INFORMATION
❾➴ For detailed instructions on how to use PhotoImpression, please refer to the program's Help.
FAQ
❾✃ Please check the following if the USB connection malfunctions.
[Case 1]
The camera power is off.
→ Turn the camera power on. We recommend using an AC power adapter in PC
mode.
[Case 2]
USB Driver is not installed correctly.
→ Install the USB Driver correctly. Refer to page 96.
[Case 3]
The USB cable is not connected or you are using a cable with an incorrect
specification.
→ Use a USB cable with the correct specification.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓111❾➔
FAQ
[Case 4]
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
→ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again,
and then turn on the camera.
[Case 5]
There is an unexpected error during file transfer
→ Turn the camera power off and on again. Transfer the file again.
[Case 6]
How do I know my computer supports a USB Interface?
→ Check the USB port in your computer or keyboard.
→ Check the OS version. A USB Interface is available in Windows 98, 98SE, 2000,
ME .XP.
→ Check [Universal Serial Bus controllers] in Device Manager. Do the following to
check [Universal Serial Bus controllers].
Win 98/ME : Trace [Start → Settings → Control Panel → System →
Device Manager → Universal Serial Bus controllers].
Win 2000 : Trace [Start → Settings → Control Panel → System → Hardware
→ Device Manager → Universal Serial Bus controllers].
Win XP
: Trace [Start → Control Panel → System → Hardware →
Device Manager → Universal Serial Bus controllers].
There must be USB Host Controller and USB root hub under [Universal Serial
Bus controllers].
In addition, double-click on the USB Universal Host Controller and the USB Root
Hub to check if the Device Status states "This device is working properly". If the
Device Status says the device is "not working properly", click the "Driver" tab and
then click [Update Driver] or [Reinstall Driver].
→ When all the conditions mentioned above are met, the computer can support the
USB interface.
[Case 7]
When using the USB hub.
→ There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible.
Wherever possible, connect the camera to the PC directly.
[Case 8]
Are other USB cables connected to the PC?
→ The camera may malfunction when it is connected to the PC at the same time as
another USB cable. In this case, disconnect the other USB cable, and connect
only one USB cable to the camera.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓112❾➔
FAQ
[Case 9]
When I open the Device Manager (by clicking Start → (Settings) → Control
Panel → (Performance and Maintenance) → System → (Hardware) → Device
Manager), there are❾✯Unknown Devices ❾✰or❾✯Other Devices ❾✰entries with a
yellow question mark(?) beside them or devices with an exclamation mark(!)
beside them.
→ Right-click on the entry with the question(?) or exclamation (!) mark and select
"Remove". Restart the PC and connect the camera the again.
For Windows 98 PC, remove the camera driver also, restart the PC, and then
reinstall the camera driver.
→ Double-click on the entry with the question (?) or exclamation (!) mark, click the
"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears
asking you to specify the location of the appropriate device driver, specify "USB
Driver" in the CD supplied.
❾✃ Please check the following if the movie clip doesn't play back.
❾➪ If you installed an incorrect codec onto your PC, the movie clip may not play back on the
PC.
1. Check whether the JPEG Decoder provided with the camera is installed.
→ If you didn't install the camera driver, please install the JPEGCODE included in the
application S/W CD-ROM. If not, the movie clip may not play back on the PC.
[ Installing the JPEG Decoder ]
1) Insert the CD provided with the camera.
2) Run the windows explorer and select the CD-ROM drive.
3) Select the JPEG_Decoder folder and double click the Setup.exe file.
The codec will be installed.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓113❾➔
FAQ
2. Compatible problems with the codecs installed onto the PC.
→ If the movie clip doesn't play back after installing the JPEG Decoder, refer to the
following.
1) When the movie clip plays back, only the sound plays back without the image.
It isn't compatible with the Mogen MJPEG Decoder. Uninstall the Mogen MJPEG
Decoder as following order. Click [Start → Run] and a window will open.
Type "regsvr32 /u m3jpgdec.ax" and press the Enter key.
2) When the movie clip plays back, the blue and red colours are reversed or the movie clip
doesn't open. It isn't compatible with the ffdshow Codec or K-lite Codec Pack.
➅緘 Disable the ffdshow program.
Trace [Start → Programs → ffdshow →
Disable ffdshow].
➅緘 Uninstall the K-Lite Codec Pack or set the
default program of the AVI file as the Windows
Media Player.
Trace [Start → Control Panel → Add/ Remove
Programs → Select the K-Lite Codec Pack →
Click the Change/ Remove button].
Run the windows explorer → Select AVI file →
Click the right mouse button → Select the "Open
with" menu → Click the Windows Media Player
→ Check the "Always use this program to open
these files" option → Click the [OK] button.
Most problems will be solved with those remedies. If the movie clip doesn't play back
continuously, install the JPEGCODE provided with the camera again.
❾➪ For more information, visit the samsung website(www.samsungcamera.com) and see the
FAQ page.
Downloaded From camera-usermanual.com Samsung Manuals
❾➓114❾➔
MEMO
Downloaded From camera-usermanual.com Samsung Manuals
❾➓115❾➔
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
www.samsungcamera.com
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
www.samsungcamerausa.com
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
SERVICE HOTLINE : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : (49) 6196 66 53 03
FAX : (49) 6196 66 53 66
www.samsungcameras.de
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2200
FAX : (33) 1-4538-6858
www.samsungphoto.fr
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-8867
FAX : (86) 22-2761-8864
www.samsungcamera.com.cn
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
Downloaded From camera-usermanual.com Samsung Manuals
6806-2530
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement