Owner`s manual | Dual Electronics Corporation XDVD110BT Car Video System User Manual

XDVD110BT
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with 7” Touch Screen Display
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature
to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in park and the
parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Copyright Notes
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
DVD logo is a trademark of DVD Format/Licensing Corporation registered in the U.S., Japan and other countries.
iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Dual Electronics Corporation is not
affiliated with Apple, Inc.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under
license.
SD logo is a trademark of SD-3C, LLC.
Other trademarks and trade names are those of their respective owners.
XDVD110BT PREPARATION
Table of Contents
Page
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparation/Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
 
AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
MP3/WMA/JPG Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-21
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-26
Operation of iPod®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28
Operation of Bluetooth®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
Auxiliary Inputs/Rear Camera Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 31
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2
XDVD110BT PREPARATION
WARNING
Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
Several states prohibit the installation of monitors/DVD players if the screen is visible from
the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit
must not be installed so that the screen is visible from the driver’s seat. When installing
this unit in the front console/dashboard, the unit must be positioned so that it is facing the
front passenger seat only. Failure to follow this instruction could lead to driver distraction
which could result in serious injury or death to the vehicle’s occupants or persons outside
the vehicle and/or property damage.
This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out
feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the
parking brake is not fully engaged. When installing this unit, the installer must connect
the parking brake detect wire (“Pink Lead”) to the parking brake mechanism in order to
make the parking brake lock-out feature operable. DO NOT simply ground the parking
brake detect wire to a metal portion of the vehicle. Failure to properly install the parking
brake lock-out feature could lead to driver distraction which could result in serious injury
or death to the driver’s occupants or persons outside the vehicle and/or property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking
brake and/or (b) purchasing/using any device or unit designed to send necessary brake
signals to the unit. Failure to follow these instructions could lead to driver distraction
which could result in serious injury or death to the driver’s occupants or persons outside
the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
3
XDVD110BT OPERATION
Safety Information
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your DUAL XDVD110BT is installed by a professional
installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
To prevent damage or injury:
• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may
cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
• If you experience problems during installation, consult your nearest DUAL dealer.
• If the unit malfunctions, reset the unit as described on page 9 first. If the problem still persists, consult your
nearest DUAL dealer or call tech assistance @ 1-866-382-5476.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents
such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than
usual. Normal brightness will return after using the monitor for a while.
• When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables
with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous
to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap
immediately.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
4
XDVD110BT INSTALLATION
Preparation
Before You Start
•Disconnect negative battery terminal. Consult a qualified technician for instructions.
•Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Getting Started
• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
•Install mounting sleeve into opening, bending tabs to secure.
•Connect wiring harness as shown on page 6. Consult a qualified technician if you are unsure.
•Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Reconnect negative battery terminal, and test for correct operation.
•Snap trim ring into place (if required).
• Slide unit into mounting sleeve to secure.
Mounting sleeve opening dimensions
7-3/16” x 2-1/16” (183 mm x 53 mm)
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
5
XDVD110BT INSTALLATION
Wiring Diagram - Inputs/Outputs
AA
CAMERA
BRAKE
ORANGE
BLUE/BLACK
BLUE
ORANGE/BLACK
CAMERA
AMP CONTROL
POWER ANTENNA
ILLUMINATION CONTROL
BLACK
YELLOW
Wiring Notes:
Subwoofer output
The Subwoofer preamp audio output (black jacket with green RCA) is active in all audio modes.
Rear camera input
A rear view camera (not included) can be used with the Camera input. Refer to page 29 for details.
Connecting an iPod/iPhone device
To play music from an iPod/iPhone device, connect the included iPod connection cable to the XDVD110BT. Once
connected, playback will begin automatically.
Note:
When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could damage
the unit. The XDVD110BT uses (1) 15 amp ATC mini style fuse located on the back of the unit.
6
XDVD110BT OPERATION
Control Locations
2
1
16
4
15
5
14
6
13
1
2
1
Release
2
Eject
12
27
11
10
9
8
7
9 Preset 5 / Screen Angle Down
10 Preset 4 / Stop
11 Preset 3 / Random
3
Auxiliary A/V Input
4
5
Band
6
Mute / End Call
7
8
Reset
14 Mode
15 Volume Knob / Talk
Preset 6 / Screen Angle Up
16 Power / Open
12 Preset 2 / Repeat
13 Preset 1 / Play / Pause
USB Port
3
4
5
6
26
7
8
25
9
24
10
23
11
21
12
21
13
20
14
19
15
18
16
17
7
3
1
Power
15 Audio
2
Mode
16 GOTO
3
Play / Pause
17 EQ / Loudness / End Call
4
Mute
18 Number Keys
5
Title
19 Root
6
Subtitle
20 OSD
7
Setup
21 Local / Random
8
Angle
22 Seek / Tune / Track Down
9
Slow
23 AS/PS / Repeat
10 Volume Up
24 ST / Program
11 Zoom
25 Stop
12 Select / Talk
26 Enter
13 Seek / Tune / Track Up
27 Band
14 Volume Down
XDVD110BT OPERATION
Remote Control Preparation
Remove battery insulation tape
Notes:
• The remote control uses one 3 volt Lithium
CR2025 battery. Remove the battery if the
remote will not be used for a month or
longer.
• Remove and dispose of battery properly.
• Do not store battery with metallic objects
or materials.
To insert or replace the battery,
remove the battery holder.
Remove the battery from the
battery holder.
Install the new battery.
Make sure to keep the (+) side up.
Insert the battery holder .
8
XDVD110BT OPERATION
General Operation
Power / Open
Volume
Volume Memory
to turn the unit on. Press and hold
for 2 seconds
Momentarily press
will open or close the
to turn the unit off. When the unit is on, pressing
monitor.
Rotate the volume knob to increase or decrease the volume level (0-39).
If the volume level is <21 when the unit is turned off, it will be retained in
memory the next time the unit is turned on. If the volume level is >20 when the
unit is turned off, the volume level will automatically default to 20 the next time
the unit is turned on.
Mute
Momentarily press MUTE to silence the audio. Momentarily press MUTE again
to return to the previously selected volume. Rotating the volume knob while the
volume is muted will also cancel the mute function.
Mode
Press MODE to step through all available input modes: Tuner, Disc (which
includes DVD and CD playback), iPod, SD, USB, Bluetooth, AV1 and AV2. Modes
of operation are indicated on the display and/or the monitor. Optional iPod
device, USB flash drive and SD card must be connected/inserted to appear in
the mode selection string.
Reset
To resolve abnormal operation or if the unit is inoperable, use the tip of a pen
to press the RESET button. The unit will reset the main processor to the default
settings.
3.5mm A/V Input
USB Port
Main Menu
Connect external audio/video devices to the 3.5mm auxiliary A/V input on the
front panel.
Connect a USB device to play MP3/WMA files or view JPG photos. The
XDVD110BT's USB port supports USB playback only. To connect a phone or
other device for charging, use the USB port on the back of the unit.
When the monitor is open, press the arrow in the top right corner to access the
Main Menu screen.
From the Main Menu screen:
- View/select any operational mode by touching the corresponding icon.
- Enter standby mode by pressing STANDBY.
- Use the up and down arrows to adjust the angle of the screen
- Select SETUP to enter the Setup menu.
9
XDVD110BT OPERATION
General Operation
Setup Menu
From the Main Menu screen, press SETUP in the bottom left corner to access
the Setup menu. Select one of the seven icons across the top (General, Time,
Language, Audio, Video, Tuner and Calibration) to access the sub-menu for
that category. Use the up and down arrow keys on the right to scroll up and
down through the available sub-menu options.
General
• Beep - Select Off or On to disable or enable the audible beep.
• Camera - Select a Normal or Mirror image for camera input.
Time
• Time - Press the current time to edit, then use the up and down arrows
to change the hour and minute settings.
• Year - Press the current year to edit, then use the up and down arrows
to increase or decrease the value.
• Month - Press the current month to edit, then use the up and down
arrows to increase or decrease the value.
• Day - Press the current day to edit, then use the up and down arrows to
increase or decrease the value.
Language
• Language - Select desired language (this option is available only on
certain models).
Audio
• Subwoofer - Turn the Subwoofer output On or Off.
• Loudness - Turn the Loudness function On or Off.
• EQ - Select from EQ options: Pop, Rock, Classic, Jazz or Off.
Video
• Aspect Ratio - Select one of the following ratios: 4:3LB, 4:3PS or 16:9.
• Brightness - Adjust the brightness level from 0-14 (default is 7).
• Contrast - Adjust the contrast level from 0-14 (default is 7).
• Saturation - Adjust the saturation level from 0-14 (default is 7).
• Hue - Adjust the hue from 0-14 (default is 7).
• Standard Video - Press "Yes" to reset video adjustments to default
values. Tuner
• Radio Region - Set the unit for one of the following regions: Europe,
America 1, America 2, Japan or Russia,
Calibration
• Calibration - Press SELECT to begin calibration of the touch screen.
Press the center of the + as indicated on the screen to calibrate the
touchscreen.
10
XDVD110BT OPERATION
AM/FM Tuner Operation
1
2
3
5
4
6
9
Tuner Operation
7
Select the Tuner icon from the Main Menu screen or press MODE until Tuner
is selected. The following instructions outline tuner operation using the touch
screen monitor; however, the tuner can also be controlled using the buttons
on the face of the radio when the monitor is closed.
Current Mode Indicator 1
Displays current mode of operation.
Tune Frequency Down 2
Press momentarily to manually tune to a lower frequency. Press and hold to
seek tune to the previous strong station.
Information Display 3
Displays information such as Loudness and EQ settings.
Tune Frequency Up 4
Press momentarily to manually tune to a higher frequency. Press and hold to
seek tune to the next strong station.
Main Menu Access 5
Preset Station Display 6
EQ 7
Local 8
Loudness 9
11
8
Press to return to Main Menu screen.
Displays the six preset stations stored in memory in the current band. Press
any preset station to play it instantly. Up to 18 FM and 12 AM stations can be
stored in memory.
Press EQ to step through the following EQ options: Pop, Rock, Classic, Jazz
or Off.
Press LOC to select between Local (LOC ON) and Distance (LOC OFF) tuning
options. The local option tunes to nearby radio stations with sufficiently strong
signals for good reception. In areas where reception is poor, switching to
distance tuning enables the unit to tune in to more distant stations. Distance
tuning is the default tuning mode.
Press LOUD to turn the Loudness feature On or Off.
XDVD110BT OPERATION
AM/FM Tuner Operation
13
Automatically Store /
Preset Scan 10
12
11
10
Press and hold AS/PS to automatically find and store the strongest stations
as presets. Press AS/PS momentarily to scan preset stations and play 10
seconds of each.
Note: To manually save preset stations, tune to the desired station, then press
and hold the desired preset number in the preset station display. The stored
preset station will appear next to the preset number when saved.
Select 11
Press SEL to access Audio and Video setup menus.
Audio Setup
• Volume - Adjust volume level from 0-39.
• Bass - Adjust bass level from -7 to 7.
• Treble - Adjust treble level from -7 to 7.
• Balance - Adjust balance from Left (L07) to Right (R07); "00" represents
equal balance.
• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents equal
fader.
Video Setup
• Brightness - Adjust brightness level from 0-14 (7 is the default).
• Contrast - Adjust contrast level from 0-14 (7 is the default).
• Saturation - Adjust saturation level from 0-14 (7 is the default).
• Hue - Adjust hue from 0-14 (7 is the default).
Band 12
Press BAND to toggle between AM and FM frequency bands.
Mute 13
Press MUTE to silence the radio. Press MUTE again to return to listening at
the previously-selected volume.
12
XDVD110BT OPERATION
CD Operation
1
2
8
3
4
5
6
7
9
CD Operation
Insert disc into the slot with the label facing up at a slight upward
angle, and playback will begin automatically. If a disc has previously
been inserted and the unit has been operating in another mode, resume
disc playback by selecting the DISC icon from the Main Menu screen or
pressing MODE until DISC is selected.
The following instructions outline tuner operation using the touch screen
monitor; however, the tuner can also be controlled using the buttons on the
face of the radio when the monitor is closed.
Current Mode Indicator 1
Displays current mode of operation.
Elapsed Time Indicator 2
Displays the elapsed time of the current track.
Track Indicator 3
Scroll Up / Down Arrows 4
Volume Indicator 5
CD Track List 6
Main Menu Access 7
Play / Pause 8
Stop 9
13
Displays the current and total number of tracks on the disc.
Press to scroll up or down the pages in the track playlist.
Displays the current volume setting of the unit.
Displays the first five tracks on the CD. Use the arrow keys to scroll down
and up through the entire list, or press a track number to play it instantly.
Elapsed time of current track will be displayed when playback begins.
Press to return to Main Menu screen.
Press to pause CD. Press again to resume CD playback.
Press  to temporarily stop playback. Press play to resume playback
from the current position. Press  a second time to fully stop playback.
Press play to begin playback from the beginning of the disc.
XDVD110BT OPERATION
CD Operation
10 11
12
13 14
15
16
17
18
19
20 21
Fast Reverse 10
Press
to fast reverse CD playback. Each touch changes speed from 2x
to 4x to 8x to 16x to 20x then back to regular playback.
Fast Forward 11
Press
to fast forward CD playback. Each touch changes speed from 2x
to 4x to 8x to 16x to 20x then back to regular playback.
Previous Track 12
Next Track 13
Volume / Audio Settings 14
Additional Options 15
Time Indicator 16
Repeat 17
Direct Track Access 18
Random 19
Intro 20
TFT Screen 21
Press to go back to the previous track.
Press to advance to the next track.
Press to display and adjust the current volume level from 0 to 39. Touch VOL
to step through the following audio settings:
• Bass- Adjust bass level from -7 to 7.
• Treble - Adjust treble level from -7 to 7.
• Balance - Adjust balance from Left (L07) to Right (R07); "00" represents
equal balance.
• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents
equal fader.
Press to access additional CD playback options.
Press to toggle from displaying the elapsed time to displaying the remaining
time of the current track.
Press to step through the Repeat options: RPT ONE (repeats current song),
RPT ALL (repeats all songs on disc) and OFF.
Press to access numeric keyboard to select desired track number. Input
track number, press OK and playback of selected track will begin.
Press to turn Random play ON or OFF.
Press to play the first 10 seconds of each song on the disc. Press again to
return to sequential play.
Press to turn off the TFT display. Press anywhere on the touch screen to
turn the display back on.
14
XDVD110BT OPERATION
MP3/WMA/JPG Operation
1
2
3
4
5
6
7
MP3/WMA/JPG Playback
from Disc, USB Device or
SD Card
To play MP3, WMA and JPG files from a disc, USB device or micro SD card.
Insert disc, connect USB device or insert SD card, and playback will begin
automatically. To return to disc, USB or SD card playback from another mode
of operation, select the DISC, USB or SD icon from the Main Menu screen or
top icon display, or press MODE until DISC, USB or SD is selected.
• Using a Cable - Connect a USB device to the black USB input cable.
• Using an SD Card - Insert SD card with the label facing up into the SD
slot located behind the face of the unit.
Note: It is not possible to view JPG files on the in-dash monitor while the
vehicle is moving. This is a safety feature to prevent driver distraction. The
JPG image viewer function will only operate when vehicle is in Park and the
parking brake is engaged as described on page 22.
Navigation Button 1
File Indicator 2
Indicates current file and the total number of files in the current folder.
OSD Controls 3
Press to view the OSD controls.
Current Mode Indicator 4
Information Display 5
Main Menu Access 6
Elapsed Time 7
15
Each press of this button navigates up through the following menus and
folders: Folder Menu (list of all songs in folder), Device Menu (list of all
folders) and Playback Menu (select between Music or JPG).
Displays current mode of operation.
Scrolls through available file information, including file name, song title,
artist name and album name.
Press to return to Main Menu screen.
Displays the elapsed time of the current track.
XDVD110BT OPERATION
MP3/WMA/JPG Operation
15
Additional Options 8
Volume / Audio Settings 9
Next Track 10
Previous Track 11
14
13
12
11
10
9
8
Press to access additional playback options.
Press to display and adjust the current volume level from 0 to 39. Touch VOL
to step through the following audio settings:
• Bass- Adjust bass level from -7 to 7.
• Treble - Adjust treble level from -7 to 7.
• Balance - Adjust balance from Left (L07) to Right (R07); "00" represents
equal balance.
• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents
equal fader.
Press to advance to the next file.
Press to go back to the previous file.
Fast Forward 12
to fast forward file playback. Each touch changes speed from 2x
Press
to 4x to 8x to 16x to 20x then back to regular playback.
Fast Reverse 13
Press
to fast reverse file playback. Each touch changes speed from 2x
to 4x to 8x to 16x to 20x then back to regular playback.
Stop 14
Play / Pause 15
Press  to temporarily stop playback and return to the current folder menu.
Press to pause playback. Press again to resume playback.
16
XDVD110BT OPERATION
MP3/WMA/JPG Operation
20
Additional Options 16
Direct Song Access 17
TFT Screen 18
Repeat 19
Random 20
17
19
18
17
16
Press to return to original OSD option display.
Press to access numeric keyboard to select desired song number. Input
song number, press OK and playback of selected song will begin.
Press to turn off the TFT display. Press anywhere on the touch screen
to turn the display back on.
Press to step through the Repeat options: RPT ONE (repeats current
song), RPT Folder (repeats all songs in current folder), RPT ALL
(repeats all songs on device) and OFF.
Press to turn the Random function ON or OFF.
XDVD110BT OPERATION
MP3/WMA/JPG Operation
Viewing JPEG Images
When viewing JPG images, press Area E to display on-screen JPG controls.
Area E
1
Play / Pause 1
Stop 2
Previous Photo 3
Next Photo 4
Additional Options 5
2
3
Press to pause slideshow at current image. Press again to resume.
Press to stop slideshow and return to photo menu.
Press to go back to the previous image.
Press to advance to the next image.
Press to access additional photo options.
Area E
6
Repeat 6
Direct File Access 7
Zoom 8
TFT Display 9
5
4
Area E
7
8
9
Press to step through the Repeat options: RPT ONE (repeats current image),
RPT FOLDER (repeats all images in the current folder), RPT ALL (repeats all
images on the disc or device) and OFF.
Press to access numeric keyboard. Input file number, press OK and
playback of selected file in the current folder will begin.
Press to zoom in (2x, 3x, 4x) or out (1/2x, 1/3x, 1/4x) on the selected image
or turn the zoom feature off.
Press to turn off the TFT display. Press anywhere on the touch screen to
turn the display back on.
18
XDVD110BT OPERATION
Media Compatibility - USB/SD Card
File Type
File System
MP3
X
X
FAT 16/FAT 32


.mp3/.MP3/.Mp3/.mP3
X

.wma/.WMA

X
.rmp/.m4a
X
X
MPEG 1
X


FAT
File
Extension
MPEG
Format
Sampling
Frequency
MPEG 2
X
MPEG 2.5
X

MPEG 1
X
32/44.1/48kHz
MPEG 2
X
12/16/22.05/24kHz
MPEG 2.5
X
8/11.025/12kHz
WMA
32/44.1/48kHz
X
MPEG 1
X
32 ~ 320kbps
MPEG 2
X
8 ~ 160kbps
MPEG 2.5
X
8 ~ 160kbps
WMA
32 ~ 192kbps
X
Directory Depth
Unlimited
Unlimited
Bitrate
Other
Information
WMA
FAT 12
File Name Length
32 bytes
32 bytes
Total File Number
2000 files
2000 files
Total Folder Number
200 folders
200 folders
File Number via Folder
2000 files
2000 files
ver.1.x
X

ver.2.x
X

Title, Artist, Album
X

Title, Artist

X
MP3 ID3 TAG
WMA TAG
Notes:
• Due to ongoing technological advancement, some USB flash drives and/or SD cards may be incompatible with
this unit.
19
XDVD110BT OPERATION
Media Compatibility - CD/DVD
File Type
ISO9660
File System
ISO9660
Extension
WMA
MP3
Level 1, Level 2


Level 3
X
X
JOLIET
ROMEO
Other
Extensions
Playback


Filename
32 bytes
32 bytes
Playback
X
X
Filename
X
X
X
X
.mp3/.MP3/.Mp3/.mP3
Apple ISO
X

.wma/.WMA

X
File
Extension
MPEG
Format
Sampling
Frequency
X
X
MPEG 1
X


MPEG 2
X
MPEG 2.5
X

MPEG 1
X
32/44.1/48kHz
MPEG 2
X
12/16/22.05/24kHz
MPEG 2.5
X
8/11.025/12kHz
WMA
32/44.1/48kHz
X
MPEG 1
X
32 ~ 320kbps
MPEG 2
X
8 ~ 160kbps
MPEG 2.5
X
8 ~ 160kbps
WMA
32 ~ 192kbps
X
Directory Depth
Unlimited
Unlimited
Bitrate
Other
Information
.rmp/.m4a
File Name Length
32 bytes
32 bytes
Total File Number
2000 files
2000 files
Total Folder Number
200 folders
200 folders
File Number via Folder
2000 files
2000 files
ver.1.x
X

ver.2.x
X

Title, Artist, Album
X

Title, Artist

X
MP3 ID3 TAG
WMA TAG
20
XDVD110BT OPERATION
Media Compatibility
Media Compatibility
The following types of discs are compatible:
• CD-DA, CD-ROM (ISO), CD-R, CD-RW
• DVD Video, DVD+R/RW, DVD-R/RW
The following types of discs/files are not compatible:
• WMA files that are protected by DRM (Digital Rights Management)
• WMA lossless format
• Discs recorded with Track At Once or packet writing
• MP3 PRO format, MP3 playlists
• RMP format
• WAV format
• WMV format
• DivX, Xvid format
• AVI format
• MPG, MPEG-4 format
• AAC, protected AAC, M4A format
Some recordable DVD's and CD's may be incompatible with this unit,
depending on media type and recording method.
Playback Order
MP3/WMA playback sequence begins in the root folder of the disc, USB flash
drive or SD card. Any empty folders or folders that do not include MP3/WMA/
JPG files are skipped.
Compatible Recording Formats
ISO9660 standards:
• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and “_” (underscore). Some characters may not be displayed correctly,
depending on the character type.
• This device can play back discs in Joliet and other standards that conform
to ISO9660. MP3/WMA written in the formats other than the above may
not play and/or their file names or folder names may not be displayed
properly.
Additional MP3/WMA Information
An internal buffer provides ESP (Electronic Skip Protection) to virtually
eliminate skipping.
When playing a disc recorded with regular audio files (CD-DA or .WAV) and
MP3/WMA files, the unit will play the MP3/WMA files only.
Notes
Some files may not play or be displayed correctly, depending on sampling
rates and bit rates.
For best results, use the following settings when ripping MP3 files:
128kbps or higher constant bit rate
44.1kHz or higher sampling frequency
For best results, use the following settings when ripping WMA files:
64kbps or higher constant bit rate
44.1kHz or higher sampling frequency
21
XDVD110BT OPERATION
WARNING
Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
Several states prohibit the installation of monitors/DVD players if the screen is visible from
the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit
must not be installed so that the screen is visible from the driver’s seat. When installing
this unit in the front console/dashboard, the unit must be positioned so that it is facing the
front passenger seat only. Failure to follow this instruction could lead to driver distraction
which could result in serious injury or death to the vehicle’s occupants or persons outside
the vehicle and/or property damage.
This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out
feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the
parking brake is not fully engaged. When installing this unit, the installer must connect
the parking brake detect wire (“Pink Lead”) to the parking brake mechanism in order to
make the parking brake lock-out feature operable. DO NOT simply ground the parking
brake detect wire to a metal portion of the vehicle. Failure to properly install the parking
brake lock-out feature could lead to driver distraction which could result in serious injury
or death to the driver’s occupants or persons outside the vehicle and/or property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking
brake and/or (b) purchasing/using any device or unit designed to send necessary brake
signals to the unit. Failure to follow these instructions could lead to driver distraction
which could result in serious injury or death to the driver’s occupants or persons outside
the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
22
XDVD110BT OPERATION
DVD Setup - Region Management
DVD Region Management
Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the
XDVD110BT plays discs according to their intentions, some functions may not work as intended. Please be sure to
read the instructions provided with each disc. This player has been designed to play back DVD software that has
been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the
region areas for which it has been designed.
The XDVD110BT will play discs labeled “Region 1” or “All”.
DVD region codes:
1 - USA, Canada
2 - Japan, Europe, South Africa, Middle East
3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia
4 - Australia, New Zealand, Mexico, South America
5 - Eastern Europe, Russia, India, Africa
6 - China
DVD Disc Symbols
Notes:
Some DVD discs can be
played only in certain playback
modes according to the
intentions of the software. As
the XDVD110BT plays discs
according to their intentions,
some functions may not work
as intended. Please be sure to
read the instructions provided
with each disc.
23
XDVD110BT OPERATION
DVD Setup - Parking Brake Initialization
SAFETY WARNING
• The video display of the in-dash unit will not operate while the vehicle is
moving. This is a safety feature to prevent driver distraction. In-dash video
functions will only operate when vehicle is in Park and the PARKING BRAKE
is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion. Refer to local laws in your area.
• The vehicle must be in park and the parking brake applied to view video on the
in-dash monitor.
• As a safety feature, a warning message will show on the display when the
vehicle's parking brake is not engaged. Video display on the in-dash monitor
isn't allowed until the PARKING BRAKE is engaged. Connect the pink PARKING
BRAKE wire to the brake switch circuit as described on page 6. Note: DVD and
AUX AV audio can be heard while the vehicle is in motion without engaging the
parking brake.
Parking Brake Initialization
1) Come to a complete stop, and put the vehicle in Park.
2) Fully engage parking brake.
24
XDVD110BT OPERATION
DVD Operation
3
2
4
Area E
1
13
12
11
Inserting a Disc
Ejecting the Disc
Touchscreen Controls 1
Current Mode Indicator 2
Current Chapter Indicator 3
9
8
7
6
5
Insert disc into the slot at a slight upward angle and playback will begin
automatically. Sub-menus may have to be pressed to access the DVD
content. Read the directions of your specific DVD disc for other features.
Press
to eject the disc.
During DVD playback, press Area E to display on-screen DVD controls.
Displays current mode of operation.
Indicates the current chapter and total number of chapters on the DVD.
Press to access numeric keyboard to select desired chapter number. Input
chapter number, press OK and playback of selected chapter will begin.
Main Menu Access 4
Press to return to main menu screen.
Additional Options 5
Press to access additional DVD options.
Volume / Audio Settings 6
25
10
Press to display and adjust the current volume level from 0 to 39. Touch
VOL to step through the following audio settings:
• Bass- Adjust bass level from -7 to 7.
• Treble - Adjust treble level from -7 to 7.
• Balance - Adjust balance from Left (L07) to Right (R07); "00"
represents equal balance.
• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents
equal fader.
XDVD110BT OPERATION
DVD Operation
Next Chapter 7
Previous Chapter 8
Press to advance to the next chapter.
Press to go back to the previous chapter.
Fast Forward 9
Press
to fast forward DVD playback. Each touch changes speed from 2x to 4x
to 8x to 16x to 20x then back to regular playback.
Fast Reverse 10
Press
to fast reverse DVD playback. Each touch changes speed from 2x to 4x
to 8x to 16x to 20x then back to regular playback.
Stop 11
Play / Pause 12
Elapsed Time Indicator 13
Press  to temporarily stop playback. Press play to resume playback from the
current position. Press  a second time to fully stop playback. Press play to begin
playback from the beginning of the DVD.
Press to pause playback. Press again to resume playback.
Shows the elapsed time of DVD playback.
14
Remaining Time 14
Language Options 15
Previous Folder 16
Title Menu 17
Repeat 18
Subtitle Language 19
Direct Chapter Access 20
Zoom 21
TFT Screen 22
15
16
17
18
19
20
21
22
Press to view the remaining time rather than the elapsed time (default).
Press to select different language options (if available).
Press to return to the previous folder on the DVD (if available).
Press to return to the title menu of the DVD.
Press to step through the Repeat options: CHAPTER, TITLE, RPT ALL and OFF.
Press to select desired subtitle language (if available): English, Spanish, French
or Off.
Press to access numeric keyboard to select desired chapter number. Input
chapter number, press OK and playback of selected chapter will begin.
Press to zoom in (2x, 3x, 4x) or out (1/2x, 1/3x, 1/4x) during DVD playback or turn
the zoom feature off.
Press to turn off the TFT display. Press anywhere on the touch screen to turn the
display back on.
26
XDVD110BT OPERATION
Operation of iPod
1
2
3
4
5
Operation of iPod
Connect an iPod device using the supplied iPod connection cable to
listen to music.
Playback can be controlled by either the XDVD110BT's on-screen
controls or directly from the iPod.
This model does not support video/photo playback.
Current Mode Indicator 1
Playback Information 2
Song Information 3
Main Menu 4
Elapsed Time Indicator 5
27
Displays current mode of operation.
Displays information about current playback functions.
Displays information about the current song, including name, artist and
album (if information is available).
Press to access main menu screen. During iPod playback, this button
also serves as a return arrow to go up one level when navigating the
music menu.
Displays both the elapsed and remaining time for playback of the
current song.
XDVD110BT OPERATION
Operation of iPod
13
Menu 6
Volume / Audio Settings 7
Next Track 8
Previous Track 9
12
11
10
9
8
7
6
Press to return to the main menu.
Press to display and adjust the current volume level from 0 to 39. Touch VOL
to step through the following audio settings:
• Bass- Adjust bass level from -7 to 7.
• Treble - Adjust treble level from -7 to 7.
• Balance - Adjust balance from Left (L07) to Right (R07); "00" represents
equal balance.
• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents
equal fader.
Press to advance to the next song.
Press to go back to the previous song.
Fast Forward 10
Press
to fast forward file playback. Each touch changes speed from
2x to 4x to 8x to 16x to 20x then back to regular playback.
Fast Reverse 11
Press
to fast reverse file playback. Each touch changes speed from
2x to 4x to 8x to 16x to 20x then back to regular playback.
Play / Pause 12
Press to pause playback. Press again to resume playback.
Repeat 13
Press to step through the Repeat options: RPT ONE (repeats current
song), RPT Folder (repeats all songs in current folder), RPT ALL
(repeats all songs on device) and OFF.
28
XDVD110BT OPERATION
Bluetooth Operation
2
1
3
4
5
6
7
8
Bluetooth Microphone
Bluetooth features of the XDVD110BT function with the
included external microphone, which is designed for mounting
to the visor or A-pillar inside the vehicle.
Pairing and Connecting
Before you can use a Bluetooth device, it must be paired and
connected. The XDVD110BT broadcasts the pairing signal
constantly when no devices are currently connected. Complete
the pairing sequence from your Bluetooth device.
The device name is "Dual BT".
The Bluetooth passcode "1234".
Once pairing is complete, most Bluetooth will connect
automatically if the device is in range when the XDVD110BT is
powered-on.
Current Mode Indicator
1
Displays current mode of operation.
Playback Information
2
Press to access main menu screen.
Dialing a Number
3
Press to display keypad and dial a number.
29
XDVD110BT OPERATION
Bluetooth Operation
11
10
9
Making a Call
4
Press to connect a call
Transfering Audio
5
Press to transfer audio between the head unit and the mobile
phone.
Recent Call List
6
Press to access the recent call list and view/select numbers
from recent Received, Dialed or Missed calls.
End Call
7
Press to end the current call.
Streaming Audio
8
Press to enter the music control menu.
Next Track
9
Press to advance to the next track.
Fast Reverse
10
Press to play or pause the music.
Previous Track
11
Press to skip to the previous track.
30
XDVD110BT OPERATION
Auxiliary Inputs - AV1 & AV2
Using AV1 Input
Connect an optional audio/video source into the 3.5mm (front panel) input.
Select AV1 from the Main Menu to listen to audio.
Engage parking brake as described on page 24 to watch video.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Using AV2 Input
Connect an optional audio/video source to the Auxiliary Input 2 (Red/White/Yellow
RCA connectors). Refer to page 6 for details.
Select AV2 from the Main Menu to listen to audio.
Engage parking brake as described on page 24 to watch video.
Rear Camera Operation - (Optional)
Using Rear Camera
Connect an optional rear camera to the Camera Input (purple RCA connector).
Refer to page 6 for details.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry. Refer to page 6 for details.
31
XDVD110BT OPERATION
Limited One Year Warranty
This warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
Dual Electronics Corp. warrants this product to the
original purchaser to be free from defects in material
and workmanship for a period of one year from the
date of the original purchase.
Dual Electronics Corp. agrees, at our option, during
the warranty period, to repair any defect in material
or workmanship or to furnish an equal new, renewed
or comparable product (whichever is deemed
necessary) in exchange without charges, subject to
verification of the defect or malfunction and proof
of the date of purchase. Subsequent replacement
products are warranted for the balance of the original
warranty period.
Who is covered? This warranty is extended to the
original retail purchaser for products purchased from
an authorized Dual dealer and used in the U.S.A.
What is covered? This warranty covers all defects
in material and workmanship in this product. The
following are not covered: software, installation/
removal costs, damage resulting from accident,
misuse, abuse, neglect, product modification,
improper installation, incorrect line voltage,
unauthorized repair or failure to follow instructions
supplied with the product, or damage occurring
during return shipment of the product. Specific
license conditions and copyright notices for the
software can be found via www.dualav.com.
What to do?
1. Before you call for service, check the
troubleshooting guide in your owner’s manual.
A slight adjustment of any custom controls may
save you a service call.
2. If you require service during the warranty period,
you must carefully pack the product (preferably
in the original package) and ship it by prepaid
transportation with a copy of the original receipt
from the retailer to an
authorized service center.
3. Please describe your problem in writing and
include your name, a return UPS shipping address
(P.O. Box not acceptable), and a daytime phone
number with your shipment.
4. For more information and for the location of the
nearest authorized service center please contact
us by one of the following methods:
• Call us toll-free at 1-866-382-5476
• E-mail us at cs@dualav.com
Exclusion of Certain Damages: This warranty is
exclusive and in lieu of any and all other warranties,
expressed or implied, including without limitation
the implied warranties of merchantability and fitness
for a particular purpose and any obligation, liability,
right, claim or remedy in contract or tort, whether or
not arising from the company’s negligence, actual or
imputed. No person or representative is authorized
to assume for the company any other liability in
connection with the sale of this product. In no event
shall the company be liable for indirect, incidental or
consequential damages.
32
XDVD110BT OPERATION
Specifications
Disc
Frequency response: 20Hz-20kHz
Channel separation @ 1kHz: >80dB
D/A converter: 24 Bit
FM Tuner
Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 10dBf
50dB quieting sensitivity: 20dBf
Stereo separation @ 1kHz: 38dB
Frequency response: 30Hz-13kHz
AM Tuner
Tuning range: 530kHz-1710kHz
Usable sensitivity: 24uV
Frequency response: 30Hz-2.3kHz
USB
Compatibility: High Speed USB 2.0
Output: 5VDC, 500mA
USB Class: Mass storage class
SD
Compatibility: SD memory card & SDHC memory card
Monitor
Panel size: 7” diagonal measurement
View angle (up/down/left/right): 50/70/70/70
Resolution: 800 (H) x 480 (V)
Brightness (cd/m2): 250
Contrast ratio: 500:1
Pixels: 1,152,000
General
Speaker output impedance: 4 ohms
Line output voltage: 2 volts
Line output impedance: 200 ohms
Chassis dimensions: 7" x 7" x 2" (W x D x H)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 18 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
33
XDVD110BT OPERATION
Troubleshooting
General
Problem
Cause
Action
Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Check connections for proper voltage (11~16VDC)
Black wire not connected
Check connection to ground
Fuse blown
Replace fuse(s)
Speaker wires not connected
Check connections at speakers
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from each other and
chassis ground
Yellow or red wire touching chassis ground
Check for pinched wire
Speaker wires touching chassis ground
Check for pinched wire
Incorrect fuse rating
Use fuses with correct rating
Parking brake safety circuit not connected
Parking brake not applied
Check connections at parking brake
Apply parking brake as described on page 24
No video display
(when in reverse)
Reverse circuit not connected
Vehicle is not in reverse
Check connections at reverse lamp
Select reverse gear
DVD does not start
playback
Physical defect in media
Wrong region
Check media for scratches
Use discs labeled "Region 1" or "All" only
Dead battery
Replace battery
Unit is not mounted correctly
Check mounting sleeve
Physical defect in media
Check media for scratches
Region code error
Use discs labeled "Region 1" or "All" only
Unit will not turn on
(no power)
Unit has power
(but no sound)
Unit blows fuse(s)
Unit has audio
(but no video)
IR remote does not work
Excessive skipping
"Wrong Region"
appears on display
For Your Records
Please keep your original sales receipt and be prepared to provide this receipt in
the event you require service, as your original receipt is considered the best proof of
purchase and indicates the date you purchased your Dual product.
Dealer Name
Dealer Phone
Purchase Date
Register Your Product
Register your product online at www.dualav.com.
34
Dual Electronics Corp.
Toll Free: 1-866-382-5476
Monday-Friday, 9AM-5PM
www.dualav.com
©2013 Dual Electronics Corp. All rights reserved.
NSA0713-V01
Download PDF

advertising