Owner`s manual | Dual XDVD8285 Portable DVD Player User Manual

XDVD8285
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with 6.5” Touch Screen Display
TOUCH
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Copyright Notes
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States
and or other countries.
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Collex is under
license.
XM and its corresponding logos are trademarks of XM Satellite Radio Inc.
All other trademarks are property of their respective owners.
XDVD8285 PREPARATION
Table of Contents
Page
DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations - Remotes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Anti-theft Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASP Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JPEG Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XM Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-Zone Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
4
5-7
8
9-11
12
13-16
15-19
20-22
23
24
25-28
29-30
30-34
35
36-44
45-53
54-58
59-62
63-66
67-68
69-70
71-76
77-80
81-84
85-89
90
91-92
93
XDVD8285 PREPARATION
WARNING
Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
Several states prohibit the installation of monitors/DVD players if the screen is visible from
the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit
must not be installed so that the screen is visible from the driver’s seat. When installing
this unit in the front console/dashboard, the unit must be positioned so that it is facing the
front passenger seat only. Failure to follow this instruction could lead to driver distraction
which could result in serious injury or death to the vehicle’s occupants or persons outside
the vehicle and/or property damage.
This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out
feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the
parking brake is not fully engaged. When installing this unit, the installer must connect
the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in
order to make the parking brake lock-out feature operable. DO NOT simply ground the
parking brake detect wire to a metal portion of the vehicle. Failure to properly install
the parking brake lock-out feature could lead to driver distraction which could result in
serious injury or death to the driver’s occupants or persons outside the vehicle and/or
property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking
brake and/or (b) purchasing/using any device or unit designed to send necessary brake
signals to the unit. Failure to follow these instructions could lead to driver distraction
which could result in serious injury or death to the driver’s occupants or persons outside
the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
XDVD8285 OPERATION
Safety Information
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your DUAL XDVD8285 is installed by a professional
installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
To prevent damage or injury:
1. Make sure to ground the unit securely to the vehicle chassis ground.
2. Do not remove the top or bottom covers of the unit.
3. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
4. Do not subject the unit to excessive shock.
5. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may
cause the unit to malfunction.
6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
7. Use only the provided hardware and wire harness.
8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
9. If you experience problems during installation, consult your nearest DUAL dealer.
10.If the unit malfunctions, reset the unit as described on page 11 first. If the problem still persists, consult your
nearest DUAL dealer or call tech assistance @ 1-866-382-5476.
11.To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents
such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
12.When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than
usual. Normal brightness will return after using the monitor for a while.
Additional Notes:
1.When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables
with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
2.Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous
to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap
immediately.
This device complies with part 15 of the FCC rules and regulations.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
XDVD8285 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Getting Started
• Insert the supplied keys between the radio and the sleeve at the left and right sides, and slide the unit out of the
mounting sleeve.
Mounting Options
1. Rear ISO-DIN (using OEM factory radio mounting brackets):
• Remove factory radio mounting brackets and attach to the left and right sides of the XDVD8285 chassis.
• See diagram below.
2. Front load (using mounting sleeve):
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna as shown on pages 6-7. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Test for correct operation and mount according your application.
• If required, snap desired trim ring into place.
• Mount the iplug™ adapter to any smooth clean surface using the supplied double-sided tape or Phillips head screws.
Mounting the XDVD8285 using OEM factory
mounting brackets.
Mounting the XDVD8285 using mounting
sleeve (front load).
XDVD8285 INSTALLATION
Expanded Wiring Diagram - Inputs/Outputs
Wiring Notes:
Subwoofer output
The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external
amplifier.
Center output
The CENTER audio output (Gray RCA) is only active in DVD 5.1 and Dolby Pro Logic II audio modes and must be
connected to an external amplifier.
Rear view camera
A rear view camera (not included) can be used with the CAMERA input.
NEED HELP??
Call our Technical Service Hotline, 1-866-382-5476.
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Altering or
defeating this safety feature is a violation of law and is prohibited.
XDVD8285 INSTALLATION
Wiring Diagram - Optional A/V Connections
iPOD
XDVD8285 OPERATION
IR Remote Preparation
To first use the IR Remote control,
you must first pull the battery
insulation tape out
Notes:
• Remove the battery if the remote will
not be used for a month or longer
• Remove and dispose of battery properly
Insert or replacing the Battery:
Remove the battery holder
Main
Remote
Remove the battery from the battery
holder
Install the new battery
Make sure to keep the (+) side up
Insert the battery holder
Multi-zone
Remote
•
CAUTION!!!
Do not store battery with metallic
objects or materials
XDVD8285 OPERATION
Control Locations - Monitor Closed
1
7
2
8
3
9
4
10
5
11
6
12
13
14
1
Power/Mute
8
Channel/Chapter/Track Up
2
AM/FM Mode - Hotkey
9
Channel/Chapter/Track Down
3
Auto Store/Preset Scan
10 Play/Pause
4
Mode
11 Info/Picture
5
Menu
12 Reset
6
Rotary Encoder/Enter
13 Open/Close Monitor/Angle Adjust
7
DVD Mode - Hotkey
14 Microphone
Monitor Notes:
•
•
•
T his model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
not obstruct the dash, shifter or any other controls.
button on the front panel only or
Upon installation, do not attempt to move the monitor by hand. Use the
the OPEN button on the remote control.
The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
obstacle and press
or OPEN again to resume the monitor open/close sequence.
XDVD8285 OPERATION
Control Functions - Monitor Closed
Power On/Off
Mute
AM/FM Mode - Hotkey
AS/PS
Press to turn the unit on. Hold for 3 seconds to turn the unit off.
Press MUTE to silence the audio;
00 will appear in the OSD (On Screen
Display). Press MUTE again to cancel.
Press AM/FM to select radio tuner mode. If the unit is already in tuner mode,
press AM/FM to select between FM1, FM2, FM3, and AM bands.
Press AS/PS momentarily to start station PRESET SCAN function,
Press AS/PS for 2 seconds to start AUTO STORE station preset function in
current BAND.
Mode
Press MODE to select between the unit’s available modes, such as: Tuner,
DVD (which includes CD and MP3/WMA playback), Aux AV in, SD, XM, iPod
and Camera inputs. Each time the MODE button is pressed the next mode is
chosen. Modes of operation are indicated on the OSD. Hold the MODE button
for 3 seconds to toggle the Multi-Zone feature on and off. Please read the
Multi-Zone section of the manual on page 85 for a full explanation.
Menu
Press MENU to display the main menu, along with the setup sub-menus.
Press MENU again to return to the current mode.
Rapid Dial Rotary Encoder
Volume
Press to toggle between the Volume and Select functions. When idle, push
and hold for 3 seconds to enter the Audio Setup Menu.
Normally, the rotary controls the volume, which is visible as a number from
0 to 40, to the right of the volume icon
displayed on the screen. When the
icon is not displayed, turn the rotary to display the volume level. Turning the
rotary while the volume is muted will cancel the mute function.
Note: To program the default volume level when the unit is turned on: turn
the rotary to the desired level, then push and hold the rotary for 3 seconds to
program the current volume level.
Select
DVD Mode - Hotkey
Turning the rotary while it’s in select mode will allow you to perform various
functions and settings depending on the mode/screen displayed. Generally,
turning the rotary will let you move through the choices and pushing the
rotary will select the highlighted choice.
Press DVD to select Disc mode.
Notes:
• Depending on the type of disc loaded, the Disc mode can be CD, MP3/WMA
or DVD.
• This button is not active when there is no disc loaded.
10
XDVD8285 OPERATION
Control Functions - Monitor Closed
Up Arrow
This button performs different functions depending on the current mode.
A detailed description of the
button can be found in each individual section.
Down Arrow
This button performs different functions depending on the current mode.
A detailed description of the
button can be found in each individual section.
Play/Pause
Press
to pause or continue playback of an audio or video track.
Note: This button is only active in Disc , SD and iPod modes.
Info/Picture
Monitor Open/Close
Angle Position
Reset
Press to display DVD disc information in DVD mode. Holding this button for 3
seconds brings up the Brightness setting, which can be controlled by the rotary
encoder or by pressing the / buttons on the main remote control.
Press
momentarily to toggle between fully open and the current angle.
Hold
for more than 1 second to adjust the view angle up and down and
release to keep desired viewing angle.
If you experience abnormal operation or, your unit is inoperable, press the
RESET button located on the front bottom-right corner of the unit. After a
system reset, the unit resets the main processor (but not the default settings).
Notes: Use the tip of a pen to access the reset button. To restore the factory
default settings, refer to page 21.
Monitor Notes:
• The angle can also be manually selected via the screen setup menu.
• The color of the LCD monitor varies between viewing angles. Select the angle
with the most optimum view for your location.
• The last position of the monitor can be saved in memory. When “TFT Auto
Open” is selected in the General Setup Menu, the monitor will return to its last
position automatically the next time the unit is turned on.
Caution
11
•Due to its highly technological design, the XDVD8285 faceplate is NOT
removable. Do not attempt to remove the faceplate.
• Upon installation, do not attempt to move the monitor by hand. Use the
button on the front panel only or the OPEN button on the remote control.
• The unit will stop if it encounters any obstacles during the open/close
sequence. If this occurs, remove the obstacle and press
or OPEN again to
resume the monitor open/close sequence.
XDVD8285 OPERATION
Control Locations and Functions - Monitor Open
1
3
2
4
1 Disc slot
2 SD card slot
3 Disc-in indicator
Red = Disc inserted
Blue = No disc inserted
4 When the panel is fully open, press
to eject the disc.
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
12
XDVD8285 OPERATION
Control Locations - Main Remote
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
Mode
16 Info
31 Root
2
Mute
17 Search
32 Repeat
3
Open/Close
18 Key #0
33 Chapter/Track Down
4
Power
19 Band/Stop
34 Chapter/Track Up
5
Key #1
20 Audio Select
35 Fast Reverse
6
Key #2
21 Escape
36 Fast Forward
7
Key #3
22 4-Way - Up
37 Zoom
8
Volume Up
23 Menu
38 Audio
9
Key #4
24 Picture
39 Angle/iPod Music mode
10 Key #5
25 4-Way - Left
40 Sub-Title/iPod Video mode
11 Key #6
26 OK/Play/Pause
12 Volume Down
27 4-Way - Right
13 Key #7
28 Repeat A-B
14 Key #8
29 Title Menu/JPEG thumbnail view
15 Key #9
30 4-Way - Down
* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.
13
XDVD8285 OPERATION
Control Functions - Main Remote
Mode
Press once to incrementally select desired source.
Mute
Press once to MUTE audio, press again to return audio.
Open/Close
Power
Keys 0-9
Volume Up
Volume Down
Info
Search
Band/Stop
Audio Select
Escape
4-Way-Up/Down/Left/Right
Menu
Picture
OK
Repeat A-B
Press once to open monitor, press again to close the monitor.
Press once to turn the unit on, press again to turn unit off.
Direct access chapter/track/preset station for current BAND.
Increase VOLUME.
Decrease VOLUME.
Displays DVD information.
Search function in the DVD mode.
Press to increment BAND, or STOP while in DVD/MP3 mode.
Enter AUDIO Setup mode.
Exit current menu.
Navigating system and DVD/SD/JPEG menus.
Enter the MAIN system menu.
BRIGHTNESS parameter setting for TFT.
Starts/pauses playback or confirm settings.
Repeat playback from time frame A to time frame B.
Title Menu
Enters the title menu on DVD/Activates thumbnail view for JPEG.
Root Menu
Enters the main menu of the DVD.
Repeat
Chapter/Track Down
Chapter/Track Up
Repeats playback of current chapter/track or folder.
Selects the previous chapter/track for playback.
Selects the next chapter/track for playback.
Fast Reverse
Fast reverses the disc/SD/iPod content.
Fast Forward
Fast forwards the disc/SD/iPod content.
Zoom
Zooming in/out on an image from DVD disc or JPEG.
Audio
Change the audio language for DVD disc playback.
Angle
Selects between different angles (when available) for a scene/Selects
iPod Music mode/Rotates JPG clockwise.
Sub-Title
Language selection for subtitle/Selects iPod Video mode.
14
XDVD8285 OPERATION
Control Locations - Multi-Zone Remote
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
20
21
23
24
26
27
18
19
22
25
28
29
30
32
31
33
1
Key #1
12 Key #9
23 Stop
2
Key #2
13 Key #0
24 Play/Pause
3
Key #3
14 Title Menu
25 Zoom
4
Multi-Zone Mode
15 4-Way - Up
26 Fast Reverse
5
Multi-Zone Mute
16 Root
27 Fast Forward
6
Key #4
17 4-Way - Left
28 Slow
7
Key #5
18 OK
29 Repeat
8
Key #6
19 4-Way - Right
30 Audio
9
Search
20 Chapter/Track Down
31 Sub-Title
10 Key #7
21 4-Way - Down
32 Repeat A-B
11 Key #8
22 Chapter/Track Up
33 Angle
* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.
15
XDVD8285 OPERATION
Control Locations - Multi-Zone Remote
Mode
Press once to incrementally select desired Multi-Zone source.
Mute
Press once to MUTE Multi-Zone audio, press again to return audio.
Keys 0-9
Search
Direct access chapter/track.
Search function in the DVD mode.
Title Menu
Enters the title menu on DVD/Activates thumbnail view for JPG.
Root Menu
Enters the main menu of the DVD.
4-Way-Up/Down/Left/Right
OK
Chapter/Track Down
Chapter/Track Up
Stop
Play/Pause
Zoom
Navigating system and DVD/SD/JPG menus.
Starts/pauses playback or confirm settings.
Selects the previous chapter/track for playback.
Selects the next chapter/track for playback.
Press to STOP while in disc/SD mode.
Press to Play/Pause in the disc/SD modes.
Zooming in/out on an image from DVD disc or JPG.
Fast Reverse
Fast reverses the disc/SD content.
Fast Forward
Fast forwards the disc/SD content.
Slow
Repeat
Audio
Sub-Title
Angle
Repeat A-B
Press to activate slow playback in DVD mode.
Repeats playback of current chapter/track or folder.
Change the audio language for DVD disc playback.
Language selection for subtitle.
Selects between different angles (when available) for a scene/Rotates
JPG clockwise.
Repeat playback from time frame A to time frame B.
16
XDVD8285 OPERATION
General Operation
Power On/Off
Mute
Mode
Press to turn the unit on. Hold for 3 seconds to turn the unit off.
Press MUTE to silence the audio;
00 will appear in the OSD (On Screen
Display). Press MUTE again to cancel.
Press MODE to select between Tuner, Disc, iPod, XM, Camera, SD and Aux
AV inputs. Modes of operation are indicated in the OSD (On Screen Display).
XM tuner, iPod and SD card (all optional) must be connected/inserted to
appear in the MODE selection string.
Optional Mode Selection
Volume
Audio Adjustment
(from front panel)
Press the top left corner of the screen to display the OSD menu bar. Press
Tuner, Disc, iPod, XM, Camera, SD and Aux AV inputs in the MAIN menu
page to select the desired source.
Adjust VOLUME using rotary encoder or the VOL +/- buttons (00-40).
Press rotary knob for 3 seconds, then release. Press rotary momentarily to
advance to desired parameter to be changed.
Turn rotary Q or P to adjust to desired level. Press rotary to advance to next
selection, and press and hold to exit.
2-Channel Audio Settings
6-Channel Audio Settings
ltem
Master Volume
00
00
00 R
F
00 L
R
00
Audio Adjustment
(from remote)
L
A djustable Range
00 to 40
Front Left Channel Volume
Front Right Channel Volume
-10 to +10
Rear Left Channel Volume
Rear Right Channel Volume
-10 to +10
Center Channel Volume
-10 to +10
Subwoofer Volume
-10 to +10
-10 to +10
-10 to +10
Note: 6-Channel audio is only
adjustable when "Full 6CH" mode
is selected. Refer to page 49 for
more details.
Press the SEL button. Press the p or q buttons on the remote to select an
item to be adjusted. Press  or  to adjust the desired setting. Press the
ESC button on the remote control to exit the audio control menu.
Notes: The Bass and Treble levels are only adjustable when EQ is set to
"User” mode. The Loud function compensates for deficiencies in sound
ranges at low levels. When the Loud function is on, LOUD is displayed in the
OSD.
17
XDVD8285 OPERATION
General Operation
INFO/PIC
Monitor Brightness
CVBS Screen Controls
Press PIC momentarily to display DVD disc information.
Press and hold PIC for 2 seconds to change monitor BRIGHTNESS:
Press
to increase,
to decrease, or turn the rotary to adjust the level up
or down. (0 minimum/20 maximum) 10 is default.
While in iPod Video playback, Aux or Camera mode:
Press and hold PIC for 2 seconds to access PICTURE MENU. Press PIC
momentarily to step to next selection:
PICTURE MENU
SHARPNESS
COLOR
CONTRAST
BRIGHTNESS
TINT
10
10
10
10
10
Sharpness
Press
or
to adjust the sharpness (0 minimum/+20 maximum).
Color
Press
or
to adjust the color (0 minimum/+20 maximum).
Contrast
Press
or
to adjust the contrast (0 minimum/+20 maximum).
Brightness
Press
or
to adjust the brightness (0 minimum/+20 maximum).
Tint
Press
or
to adjust the tint (0 minimum/+20 maximum).
L
Note: Adjustments to Sharpness, Color, Contrast, Brightness, or Tint are only
possible while in either iPod video playback, Aux or Camera mode.
18
XDVD8285 OPERATION
General Operation - Main Menu
Main Menu Access
There are three methods to access the MAIN menu:
• Press MENU button on the front panel.
• Press MENU button on the main remote control.
• Touch the upper left corner of the touch screen.
1
2
3
4
5
6
16
15
7
L
14
13
12
5
11
Touch Access Buttons
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
Rapid Dial Rotary Encoder
19
10
9
8
Touch to access AM/FM TUNER mode.
Touch to access XM mode, (Optional XM tuner must be connected to activate).
Touch to access CD/DVD mode, (CD/DVD must be inserted).
Touch to access CAMERA mode, if optional camera isn't connected,
"No Signal Detected" will be displayed.
Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first.) Refer
to page 81 for more details.
Touch to RETURN to previous screen.
Touch to access iPod mode, (Optional iPod must be connected to activate).
Touch to enter STANDBY mode, touch screen again or any button to resume
normal operation.
Note: VOLUME level can be controlled in STANDBY mode.
Touch to access AUXILIARY A/V INPUT mode.
Touch to access SD mode, (Optional SD card must be inserted).
Touch to access SCREEN SETUP menu.
Touch to access GENERAL SETUP menu.
Touch to access ASP Config menu.
Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function).
Touch to access MULTI-ZONE source menu.
Touch to access MAIN source menu.
The rotary encoder can also control touch screen functions from the main menu.
• Select desired function rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
XDVD8285 OPERATION
GENERAL Setup - Menu
L
General Setup Menu
•
•
•
Press GENERAL icon to access the GENERAL setup mode.
Select desired parameter you wish to change.
Page will return back to previous screen after 10 seconds of inactivity or
by pressing the RETURN button.
GENERAL Setup Menu matrix - page 1
Settings
Default
Radio
USA
Clock adjust
Clock Mode
AM
12Hr
Camera Image
Normal
Video Format
Auto
TFT Auto Open
Off
Options
USA
S-Amer1
S-Amer2
Europe
00:00
12Hr
24Hr
Normal
Reverse
Auto
NTSC
PAL
On
Off
Manual
Function
Set to appropriate setting for your country
See adjusting the clock on page 23 for more details
PM 6:00
18:00
Normal Image
Mirror camera input image 180 degrees
System will auto detect NTSC or PAL
For NTSC compatibility
For PAL compatibility
TFT panel will automatically open when IGN is turned on
TFT panel will not auto open when IGN is turned on
TFT will only open/close when
button is pressed
20
XDVD8285 OPERATION
GENERAL Setup - Menu
L
General Setup Menu
L
•
•
•
•
Press GENERAL icon to access the GENERAL setup mode.
Press PAGE icon in the lower right corner.
Select desired parameter you wish to change.
Page will return back to previous screen after 15 seconds of inactivity or
by pressing the RETURN button.
GENERAL Setup Menu matrix - page 2
Settings
Bluetooth
Anti-theft Code
Anti-theft active
Load Factory
defaults
21
Default
Off
0000
Off
Yes
Options
Off
On
---On
Off
Are you
sure?
Yes/Cancel
Function
Turns off the Bluetooth functionality
Enables Bluetooth functionality
Must enter password to turn anti-theft on or off
System will require a password if main battery power is
removed for more then 40 seconds
No password will be required if power is removed
Load all factory parameters to their original settlings,
Notes: This will not reset the anti-theft password.
Default anti-theft password is 0000.
XDVD8285 OPERATION
GENERAL Setup - Adjusting Radio Frequency
Adjusting Radio Frequency
L
1
Step 1
1) Touch top left corner of screen.
Step 2
L
2
2) Touch GENERAL icon.
L
3
Step 3
3) Touch USA.
L
L
5
4
Step 4
4) Touch the setting for your region.
Step 5
Touch RETURN to exit.
22
XDVD8285 OPERATION
GENERAL Setup - Adjusting the Clock
12Hr Clock Mode
L
1
Step 1
1) Touch top left corner of screen.
Step 2
L
2
2) Touch GENERAL icon.
L
3
Step 3
3) Touch 00:00 area in the CLOCK row.
L
7
L L L
8
5
6
Steps 4-8
4) Keypad will appear.
5) Enter HOURS, touch OK.
6) Enter MINUTES, touch OK.
7) Touch AM or PM to set.
8) Touch RETURN to exit.
24Hr Clock Mode
23
For 24Hr format, select 24Hr from CLOCK MODE, then follow steps 1-8.
XDVD8285 OPERATION
GENERAL Setup - Setting the Anti-theft code
Default Anti-theft password is 0000
and is turned off. To turn this
feature on, follow the steps below.
CAUTION!!
This will lock your unit from operating
if battery power is disconnected for
more than 5 minutes.
Step 1 & 2
L
1
L
2
1) Touch top left corner of screen.
2) Touch GENERAL icon.
L
4
L
3
Step 3 & 4
Step 5 & 6
Note: it is
recommended that
you choose your own
4-digit password
Step 7 & 8
carefully, write it down
somewhere and keep
in a safe location. In
the event you ever
loose or forget your
password, call our tech
hot line for support
on how to unlock your
system.
Step 9 & 10
3) Touch down arrow icon.
5) Enter 0000, then press OK.
4) Touch ----.
L
5
L
6
6) Touch Off.
L
L
L
7
7) Touch On.
L
8
8) Touch ---- again.
9) Enter your new 4-digit password,
then press OK.
10
9
10) Touch RETURN to exit.
24
XDVD8285 OPERATION
SCREEN Setup - Menu
Screen Setup Menu
•
•
•
L
Press SCREEN icon to access the SCREEN setup mode.
Select desired parameter you wish to change.
Page will return back to previous screen after 15 seconds of inactivity or by
pressing the RETURN button.
SCREEN Setup Menu matrix
Settings
Default
Options
Brightness
10
0 - 20
Screen Tilt
Screen Saver
4
On
TS Calibrate
No
1-6
Off
On
No
Yes
Version
Function
Press  or  on the remote or press the rotary once and
rotate clockwise/counter-clockwise to adjust the Brightness to
the desired setting
Select 1 to 6 to adjust the default tilt angle of the screen
Select On to activate the screen saver, Off to deactivate
Touch Yes to enter the Touch Screen calibration mode
Software version of unit
System Standby
L
To conserve the LCD backlight lifespan and eliminate glare while night driving,
press STANDBY. The TFT screen will turn off (black out), however all other
operations continue to operate. Press any button except VOLUME, or touch the
screen again to return to normal viewing.
25
XDVD8285 OPERATION
SCREEN Setup - Setting TFT Brightness
This will set the default setting
for the TFT display brightness.
This can also be set by
pressing the INFO button on
the front TFT panel.
Step 1
Step 2
L
1
1) Touch top left corner of screen.
L
2
2) Touch SCREEN icon.
L
3
Step 3
3) Touch [-] to reduce brightness.
L
L
5
4
Step 4
4) Touch [+] to increase brightness.
0 - 20 is possible
Default = 10
Step 5
5) Touch RETURN to exit.
26
XDVD8285 OPERATION
SCREEN Setup - Setting TFT Angle
Set for best viewing angle for
your vehicle
L
1
Step 1
1) Touch top left corner of screen.
Step 2
L
2
2) Touch SCREEN icon.
L
3
Step 3
3) Touch a number displayed in SCREEN TILT row.
L
L
5
4
Step 4
4) Touch desired angle for best viewing angle.
1 - 6 is possible
Default = 4
Step 5
27
5) Touch RETURN to exit.
XDVD8285 OPERATION
SCREEN Setup - Touch Screen Calibration
Upon initial installation or
occasionally, the touch screen may
have to be calibrated. Follow these
steps as described.
Step 1
L
1
1) Touch top left corner of screen.
L
2
Step 2
2) Touch SCREEN icon.
LL
3
Step 3 & 4
4
3) Touch No in TS Calibration row.
4) Then touch Yes.
L
5
Notes: For proper calibration
you must touch each pointer for
2 seconds. If pointers are not
touched properly, the calibration
sequence will start over until the
calibration is done correctly.
Step 5 & 6
5) Touch and hold the pointers as indicated on the screen for 2 seconds each.
6) Screen will automatically return to MAIN MENU, touch RETURN to exit.
28
XDVD8285 OPERATION
ASP Config - Audio Settings
Notes:
Bass Freq
Treble Freq
Sub Filter
These settings affect the quality of the audio in "Downmix" mode only and
are primarily for use by a professional installer. For the casual user, it is
recommended to only adjust the general sound quality by using the Audio Setup
Menu, which is accessed by pressing the SEL button on the remote or pressing
the rotary for 3 seconds.
Sets the bass center frequency for optimal bass effect.
Choices are 60, 80, 100, 130, 150 and 200Hz.
Sets the treble center frequency for optimal treble effect.
Choices are 10, 12.5, 15 and 17KHz.
Sets the subwoofer crossover frequency which affects the subwoofer’s low-pass
filter and the “SMALL” speakers’ high-pass filter.
Choices are 80, 120 and 160Hz.
Notes: This setting has no effect when the subwoofer is set to “OFF” and/or if any other speaker is set to "LARGE".
Sub Phase
Bass Q-Factor
29
Sets the phase of the subwoofer. Depending on the installation, this setting can
be used to change the relative phase of the subwoofer output in relation to the
other speakers.
Choices are 0˚ and 180˚.
This setting alters the sharpness or "Q factor" of the bass output.
Choices are 1.0, 1.25, 1.5 and 2.0.
XDVD8285 OPERATION
ASP Config - Audio Settings
L
Notes:
FM/AM Gain
The Gain settings allow you to customize the relative volume of the various
modes to compensate for volume differences between the sources.
The range is adjustable between -7 to +7, with 0 being the reference point
(default level).
Adjusts the relative volume in AM/FM Tuner mode.
DVD Gain
Adjusts the relative volume in DVD/CD/MP3/WMA mode.
iPod Gain
Adjusts the relative volume in iPod mode.
Bluetooth Gain
Adjusts the relative volume in Bluetooth mode.
XM Gain
Adjusts the relative volume in XM Tuner mode.
Aux In Gain
SD Card Gain
Adjusts the relative volume in Aux In mode.
Adjusts the relative volume in SD Card mode.
Note that Aux In Gain and SD Card Gain are on a separate screen, which is
accessed by touching the white arrow at the bottom right corner of the screen.
30
XDVD8285 OPERATION
AM/FM Tuner Operation - OSD Overview
1
2
3
4
5
20
19
6
7
18
17
16
15
14
Tuner Mode
31
13
12
11
10
9
8
From the main menu, touch TUNER icon on the screen, or press the AM/FM
button to select AM/FM Tuner mode.
1
Current Source Indicator
Displays source currently playing.
2
Preset Number Indicator
Shows what preset has been selected.
3
Stereo Indicator
Shows that the frequency selected is received in stereo.
4
Preset Number List Display
Shows the preset list by preset number.
5
Preset Station List Display
Shows the preset station list by frequency. Touch frequency to select a
preset. Touch and hold frequency to store presets.
6
Local / DX Tuning Mode
Shows when local or distance tuning is on.
7
Preset Display Scroll Bar
Allows scrolling of preset list.
8
Tuner Scan
Touching this icon will scan through all available stations in the current band.
XDVD8285 OPERATION
AM/ FM Tuner Operation - OSD Overview
9
Tune Frequency - Up
Touching this icon will tune the radio to a higher frequency by one frequency step.
10
Tune Frequency - Down
Touching this icon will tune the radio to a lower frequency by one frequency step.
11
Seek Next Station - Up
Touching this icon will tune to the next strong station at a higher frequency. (This function can also be performed by pressing .)
12
Seek Next Station - Down
Touching this icon will tune to the next strong station at a lower frequency. (This function can also be performed by pressing .)
13
Preset Scan/Auto Station Tune
Touching this icon will scan through all presets in the current band. (This function can also performed by pressing the AS/PS button.)
Holding this button for more than 2 seconds will automatically program the 12 strongest stations available into the presets in the current band. (This function can also be performed by holding the
AS/PS button.)
14
Band
15
Volume Indicator
Indicates current volume level, controlled by rotary encoder.
16
Multi-Zone Indicator
Displays current status of Multi-Zone mode.
17
Loudness Indicator
Touch screen here to enter Audio Setup Menu.
18
EQ Indicator
Touch screen here to enter Audio Setup Menu.
19
Current Station Indicator
Indicates current frequency.
20
Band Indicator
Shows which band the radio is tuned to, FM-1, FM-2, FM-3, or AM.
Touch band icon repeatedly until the desired band is displayed, FM-1, FM-2, FM-3, or AM. (This function can also be performed by pressing AM/FM button.)
32
XDVD8285 OPERATION
AM/FM Tuner Operation
AM/FM Tuner Mode
From the main menu, touch TUNER icon to select AM/FM Tuner mode.
Press the AM/FM button.
From the remote control or the front panel:
Press MODE until TUNER is displayed on the screen.
Band
Touch
on the screen repeatedly until the desired band is displayed, FM-1,
FM-2, FM-3, or AM.
Press the AM/FM button to switch between bands, FM-1, FM-2, FM-3, AM.
From the remote control:
Press the BAND button.
Manual Tuning
Touch
Touch
on the screen to tune to the next higher frequency step.
on the screen to tune to the next lower frequency step.
Touch and hold either
multiple stations.
or
on the screen to continue tuning across
From the remote control:
Touch
or
to perform manual tuning.
Seek Tuning
Touch
Touch
Press
Press
to tune to the next higher strong station.
to tune to the next lower strong station.
to tune to the next higher strong station.
to tune to the next lower strong station.
From the remote control:
Press
or to tune to the next higher strong station.
Press
or to tune to the next lower strong station.
Storing Presets
There are 36 FM and 12 AM presets available in 4 bands.
After finding a frequency that you would like to store in memory, touch and hold
the screen on any of the frequencies in the preset station list until it turns yellow.
Auto Store Presets
Touch and hold the
icon to automatically program the 12 strongest stations
available into the presets in the current band.
Press and hold the AS/PS button for more than 2 seconds.
33
XDVD8285 OPERATION
AM/ FM Tuner Operation
Preset Scan
Touching the
button will scan through all tunable presets in the current
band and play them for 10 seconds each.
Press the AS/PS button momentarily.
Direct Preset Tuning
To select a desired station from the preset station list, touch any of the
displayed station frequencies from the list.
Use Rapid Dial by pressing in on the rotary, turn clockwise or
counter-clockwise, and pressing in again to select the highlighted channel.
Use the up and down arrows on screen to scroll through the presets. Once
highlighted, simply touch the screen at the appropriate preset.
From the remote control:
Press or to scroll through the presets. When the correct preset is
highlighted press OK.
Use the numeric keypad to enter the desired preset number.
Scan Tuning
Touch SCAN on the screen and it will tune you to all stations available with
good reception for 10 seconds at a time. Touch SCAN again to disable.
Local Tuning
Local tuning lets you tune in radio stations with sufficiently strong signals for
good reception. In areas that reception is poor, you can switch from local to
distance tuning by touching the LOC button on the screen.
34
XDVD8285 OPERATION
WARNING
Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
Several states prohibit the installation of monitors/DVD players if the screen is visible from
the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit
must not be installed so that the screen is visible from the driver’s seat. When installing
this unit in the front console/dashboard, the unit must be positioned so that it is facing the
front passenger seat only. Failure to follow this instruction could lead to driver distraction
which could result in serious injury or death to the vehicle’s occupants or persons outside
the vehicle and/or property damage.
This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out
feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the
parking brake is not fully engaged. When installing this unit, the installer must connect
the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in
order to make the parking brake lock-out feature operable. DO NOT simply ground the
parking brake detect wire to a metal portion of the vehicle. Failure to properly install
the parking brake lock-out feature could lead to driver distraction which could result in
serious injury or death to the driver’s occupants or persons outside the vehicle and/or
property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking
brake and/or (b) purchasing/using any device or unit designed to send necessary brake
signals to the unit. Failure to follow these instructions could lead to driver distraction
which could result in serious injury or death to the driver’s occupants or persons outside
the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
35
XDVD8285 OPERATION
DVD Operation - Parking Brake Initialization
SAFETY WARNING
CAUTION !!!
IT'S UNLAWFUL TO OPERATE
A VEHICLE WHILE VIDEO IS
DISPLAY IN THE DRIVERS
VIEWING AREA
ENGAGE EMERGENCY BRAKE
TO ENJOY VIDEO
Front Monitor Video
Initialization
• The video display of the in-dash unit will not operate while the vehicle is
moving. This is a safety feature to prevent driver distraction. In-dash video
functions will only operate when vehicle is in Park and the PARKING BRAKE
is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion. Refer to local laws in your area.
• The vehicle must be in park and the parking brake applied to view video on the
in-dash monitor.
• As a safety feature, “ENGAGE PARKING BRAKE” blue screen will show on
the display when the vehicle's parking brake is not engaged. Video display
on the front monitor isn't allowed until the PARKING BRAKE is engaged. By
connecting the yellow/blue PARKING BRAKE wire to brake switch circuit as
described below, DVD and AUX AV audio can be heard while the vehicle is in
motion without engaging the parking brake.
Follow these two initialization procedures carefully to allow video playback on
on the XDVD8285 TFT:
There are two situations that start the PARKING BRAKE sequence.
Parking Brake Initialization
Situation 1
First situation is while driving:
1) Stop vehicle, put in Park, make sure PARKING BRAKE is off/released.
2) Depress PARKING BRAKE for 1 second.
3) Release PARKING BRAKE for 1 second.
4) Depress PARKING BRAKE permanently.
Note:
Once above procedure 1-4 is completed, video will display in about 6 seconds.
Parking Brake Initialization
Situation 2
Second situation is while already parked and the PARKING BRAKE is already
applied:
1) Keep vehicle in Park, PARKING BRAKE should be on.
2) Release PARKING BRAKE for 1 second.
3) Depress PARKING BRAKE for 1 second.
4) Release PARKING BRAKE for 1 second.
5) Depress PARKING BRAKE permanently.
Notes:
Once 2nd procedure 1-5 is completed, video will display in approx. 6 seconds.
The transition time must be less than 2 seconds between depress and release.
This procedure will have to repeated when the IGN is turned off.
36
XDVD8285 OPERATION
DVD Operation
DVD Region Management
Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the
XDVD8285 plays discs according to their intentions, some functions may not work as intended. Please be sure to
read the instructions provided with each disc. This player has been designed to play back DVD software that has
been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the
region areas for which it has been designed.
The XDVD8285 will play discs labeled “Region 1” or “All”.
DVD region codes:
1 - USA, Canada
2 - Japan, Europe, South Africa, Middle East
3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia
4 - Australia, New Zealand, Mexico, South America
5 - Eastern Europe, Russia, India, Africa
6 - China
DVD Disc Symbols
Notes:
Some DVD discs can be
played only in certain playback
modes according to the
intentions of the software.
As the XDVD8285 plays discs
according to their intentions,
some functions may not work
as intended. Please be sure to
read the instructions provided
with each disc.
37
XDVD8285 OPERATION
DVD Operation - Inserting a Disc
Eject button
DVD Loading Slot
Insert CD/DVD with label facing upwards
Inserting a Disc
Open panel to reveal disc slot by pressing . With the label facing up,
insert a standard size disc into the slot. The panel will close and the disc will
automatically begin playback. Other sub-menus may have to be pressed to
access the DVD movie/music content. Read the directions of your specific DVD
disc for other features.
Note: If PARENTAL Lock is activated and the disc inserted is not authorized,
a 4-digit code must be entered and/or the disc be authorized. See "RATING
MENU" on page 53.
Note: Only one disc can be inserted at a time.
Ejecting the Disc
Resetting the Loading Mechanism
Press the EJECT button.
If the disc loads abnormally or an system error occurs, press and hold the
eject button for 3 seconds to reset the loading mechanism. The disc will eject
and normal operation should resume.
38
XDVD8285 OPERATION
DVD Operation - Touch Screen Controls
Hidden Touch Screen area
while in TUNER mode
There are several hidden TOUCH SCREEN areas as outlined below:
"A" area can be used in any mode to access MAIN menu.
L
Hidden Touch Screen areas
while in DVD mode
"A-F" areas can be used in DVD mode to access:
A - Displays MAIN menu
B - Displays DVD disc information
C - Selects PREVIOUS chapter
D - Selects NEXT chapter
E - Displays the full DVD transport controls
F - Displays GOTO search menu
L
39
XDVD8285 OPERATION
DVD Operation - Touch Screen Controls
Using the hidden Touch Screen
Controls
A - Displays MAIN menu
B - Displays DVD disc
information
C - Selects PREVIOUS chapter
D - Select NEXT chapter
E - Displays the full DVD
transport controls
F - GOTO search menu
L
L
AREA A
Access MAIN Menu
Note:
A DVD disc must be inserted
to access these functions and
features.
AREA B
Displays Disc Information
L
L
AREA C
Selects PREVIOUS Track
AREA D
Selects NEXT Track
L
L
AREA E
Displays DVD Transport Controls
AREA F
DVD Search
40
XDVD8285 OPERATION
DVD Operation - Touch Screen Controls
1
Using the hidden Touch
Screen Controls
2
Touch AREA E
3
DVD Mode
41
4
5
6
7
8
9
From the main menu, touch the DISC icon on the screen, or press DVD button to
select DVD mode.
1
Title Menu
Jumps to the DVD Title menu.
2
Sub-Title Mode
Activates sub-titles and cycles between multiple sub-title languages.
3
Play/Pause
Touch the
4
Stop
5
Fast Reverse
Touch the icon to fast reverse at 2x speed.
Each touch changes speed from 2x to 4x to 8x to 20x then back to 1x play.
6
Fast Forward
Touch the icon to fast forward at 2x speed.
Each touch changes speed from 2x to 4x to 8x to 20x then back to 1x play.
7
Repeat
icon to repeat the current chapter or title. This icon will
Touch the
remain highlighted until touched a third time to disable.
8
Repeat A-B
Touch the A B icon once to select a start point. Touch it a second time to
select and end point. The A B icon will illuminate and the DVD will then
loop from the start point to the end point until touched a third time.
9
Audio Mode
Touch this icon to activate alternate audio modes on DVD's that have
alternate audio streams.
Touch the
icon to temporarily stop or resume playback.
icon to stop the chapter where it is.
XDVD8285 OPERATION
DVD Operation - Searching a DVD
Searching a DVD
L
Searching by Time, Title
or Chapter
Touch Area F to bring up the Search Window. The Search Window allows a search
for a specific time, title or chapter.
Search by TIME example
To search for a specific time, touch the --:--:-- area and an on-screen keyboard will
pop up. Use the keyboard to enter a time and touch OK. (For example, to skip to 1
hour, 12 minutes and 19 seconds into the DVD, touch: 1 1 2 1 9 OK.)
To search for a specific title and/or chapter, touch the --- / --- area and an
on-screen keyboard will pop up. Use the keyboard to enter a title and chapter and
touch OK. This can be used to select a specific chapter in the current title, a new title
or a specific chapter in a new title. (For example, to skip to a specific chapter within
the current title, touch the --- on the right and use the keyboard to enter a chapter
number, then touch OK.
To skip to a different title and start from the beginning, touch the --- on the left and
the keyboard to enter a title number, then touch OK. To skip to a specific chapter in
a new title: touch the left --- and use the keyboard to enter a title number, DO NOT
touch OK, then touch the right --- and use the keyboard to enter a chapter number,
Then touch OK.)
From the remote control:
Press SRCH to bring up the search window, then use the arrows to highlight either
the time, title or chapter field and use the numeric keypad to enter the appropriate
information and press OK.
Notes:
Some DVD discs can be played only in certain playback modes
according to the intentions of the software. As the XDVD8285 plays discs
according to their intentions, some functions may not work as intended.
Please be sure to read the instructions provided with each disc.
42
XDVD8285 OPERATION
DVD Operation
Playback Control
Touch Area E to bring up the on-screen buttons.
Touch
to fast forward or
to fast reverse.
Each subsequent press of the button will change the speed from normal to 2x
to 4x to 8x to 20x and back to 1x.
Hold the
Hold the
button to fast forward.
button to fast reverse.
From the remote control:
Press
to fast forward.
Press
to fast reverse.
Repeat Mode
Touch the Repeat button to repeat either a chapter or title. The first touch
activates Repeat Chapter mode and a second touch activates Repeat Title
mode. When either mode is active, the Repeat button will be illuminated, and
touching it a third time will disable Repeat Mode.
From the remote control:
Press
to select Repeat Chapter, Repeat Title and Repeat Off modes.
Note: The Repeat Mode can only be changed while the DVD is playing.
Repeat A->B
T ouch the A B icon once to select a start point. Touch it a second time to
select and end point. The A B icon will illuminate and the DVD will then loop
from the start point to the end point until touched a third time.
From the remote control:
Press A B to select a start point and stop point. Press a third time to
deactivate.
Play/Pause
Touching Play/Pause will temporarily stop playback of the DVD. Touching it
again will resume playback,
Press the PLAY/PAUSE button to pause or resume the DVD.
From the remote control:
Press OK to temporarily stop and resume playback.
Stop
Touch Stop to stop playback. Pressing Play at this point will resume playback.
If Stop is touched a second time, then playback stops completely and will
restart from the beginning of the disc.
From the remote control:
Press to stop playback of the current chapter.
43
XDVD8285 OPERATION
DVD Operation
Sub-Titles
Touch the SUB.T button to activate Sub-Title mode and select a sub-title language.
Each touch will cycle the mode from off to language 1, language 2, etc., and back to
off.
From the remote control:
Press the SUB-T button to control Sub-Title mode.
Notes:
• Not all DVDs have sub-titles and when they do, some will only have 1 language.
Therefore this function may be disabled or limited.
• The Sub-Title Mode can only be changed while the DVD is playing.
Audio Mode
Touch the Audio Mode icon to change the audio stream. Each touch will cycle the
language.
From the remote control:
Press the AUDIO button to control the Audio Mode.
Notes:
• Not all DVDs have multiple languages, therefore this function may be disabled or
limited.
• The Audio Mode can only be changed while the DVD is playing.
DVD Disc Information
Touch Area B to bring up the DVD Disc Information, which includes:
Current/Total Titles and Chapters, elapsed time for current title, EQ Mode and
Loudness setting, current time and Multi-ZONE Indicator.
Press the PIC button to bring up the DVD Disc Information.
From the remote control:
Press the INFO button to bring up the DVD Disc Information.
Zoom Mode
DVD Title Menu
From the remote control:
Press the ZOOM button to activate Zoom Mode.
Each subsequent press of the button will change the magnification from normal to
1 to 2 to 3 to 4 and back to normal.
When Zoom Mode is active, the arrows on the remote will pan the screen up, down,
right and left.
Touch the Title Menu icon to return to the DVD’s main menu.
From the remote control:
Press TITLE to return to the DVD’s main menu.
Press ROOT to move up one level on the DVD’s menus. (For example, when viewing
bonus materials, the ROOT button will return to the bonus menu instead of the main
menu.) Pressing ROOT again will usually return to the current chapter.
Note: On some DVD’s the TITLE and ROOT buttons may be reversed.
44
XDVD8285 OPERATION
DVD Setup Menu - Language
LANGUAGE Setup Menu
Note:
A DVD disc must be inserted
to access these functions and
features.
With the unit in DVD mode, press AREA A (top left screen) to display the MAIN
menu. Press DVD Setup to access the DVD setup menu.
L
L
Press the LANGUAGE icon to select LANGUAGE setup page.
Disc Subtitle
Press to select desired disc subtitle language.
L
Audio Language
L
Press to select desired disc audio language.
L
DVD Menu
English = DEFAULT
French
Spanish
Press to select desired disc menu language.
L
45
English
French
Spanish
Auto
Off = DEFAULT
English = DEFAULT
French
Spanish
XDVD8285 OPERATION
DVD Setup Menu - Audio
Audio Setup Menu
Note:
A DVD disc must be inserted
to access these functions and
features.
With the unit in DVD mode, press AREA A (top left screen) to display the MAIN
menu. Press DVD Setup to access the DVD setup menu.
L
L
Press the AUDIO icon to select from the following menus:
Pink Noise
Press to activate pink noise generator for the desired channel. The pink noise
generator is used to set the relative speaker levels for multi-channel playback.
L
Dynamic Range Control
L
Downmix (2-channel) Settings
Off = DEFAULT
Left
Right
Full 6CH (6-channel) Settings
Off = DEFAULT
Left
Right
Left Surround
Right Surround
Select On to activate dynamic range control.
Off = DEFAULT
On
L
46
XDVD8285 OPERATION
DVD Setup Menu - Audio
Center Control
Press to select desired center channel time delay. The distance is defined in
milliseconds.
5ms
4ms
3ms
2ms
1ms
0ms = DEFAULT
L
Rear Control
Press to select desired rear channel time delay. The distance is defined in
milliseconds.
15ms
12ms
9ms
6ms
3ms
0ms = DEFAULT
L
Down Sampling
Select On to activate audio down sampling. The DVD audio output will be
downsampled to 48kHz. The original sampling frequency is preserved when Off
is selected.
Off = DEFAULT
On
L
47
XDVD8285 OPERATION
DVD Setup Menu - Video
Video Setup Menu
Note:
A DVD disc must be inserted
to access these functions and
features.
With the unit in DVD mode, press AREA A (top left screen) to display the MAIN
menu. Press DVD Setup to access the DVD setup menu.
L
L
Press the VIDEO icon to select from the following menus:
TV Shape
Press to select desired TV shape.
L
4:3
16:9 = DEFAULT
NORMAL - 4:3
L
WIDE - 16:9
Angle Mark
Select On to activate angle mark.
On = DEFAULT
Off
L
View Mode
Press to select desired view mode.
FILL
Original
H FIT
W FIT
FIT to Screen = DEFAULT
Pan Scan
L
48
XDVD8285 OPERATION
DVD Setup Menu - Speaker
Speaker Setup Menu
Note:
A DVD disc must be inserted
to access these functions and
features.
With the unit in DVD mode, press AREA A (top left screen) to display the MAIN
menu. Press DVD Setup to access the DVD setup menu.
L
L
Press SPEAKER icon to select from the following menus:
Speaker Mode
Select desired speaker output mode.
Full 6CH
DownMix = DEFAULT
L
*Front Speaker Size
L
Select size of front speaker.
Large = DEFAULT
Small
L
Note: *Full 6CH mode must be selected to adjust the front speaker size.
49
XDVD8285 OPERATION
DVD Setup Menu - Speaker
*Surround Speaker Size
Note:
A DVD disc must be inserted
to access these functions and
features.
*Subwoofer Speaker
Select size of surround speaker.
Large = DEFAULT
Small
None
L
Select Present if a subwoofer is included in your system.
Present
None = DEFAULT
L
*Center Speaker Size
Press to select size of center speaker.
Large
Small
None = DEFAULT
L
Note: *Full 6CH mode must be selected to adjust the surround speaker size,
subwoofer speaker and center speaker size.
50
XDVD8285 OPERATION
DVD Setup Menu - Pro Logic II
Pro Logic II Setup Menu
Note:
A DVD disc must be inserted
to access these functions and
features.
With the unit in DVD mode, press AREA A (top left screen) to display the MAIN
menu. Press DVD Setup to access the DVD setup menu.
L
L
Press the Pro Logic II icon to select from the following menus:
Decode Mode
Select desired decode mode.
Off
Pro Logic
PLII Matrix
PLII Movie
PLII Music = DEFAULT
L
*Panorama
L
Select On to activate panorama mode.
Off = DEFAULT
On
L
Activating panorama mode extends the front stereo image to include the
surround speakers for a wraparound effect.
Note: *PLII Music decode mode must be selected to activate panorama mode.
51
XDVD8285 OPERATION
DVD Setup Menu - Pro Logic II
*Dimension
Select desired dimension.
Note:
A DVD disc must be inserted
to access these functions and
features.
L
0
1
2
3 = DEFAULT
4
5
6
Changing the dimension control allows you to adjust the soundstage either
towards the front or towards the rear.
*Center Width
Select desired center channel width.
L
0
1
2
3 = DEFAULT
4
5
6
Changing the center width control allows adjustment of the center image so it
may be heard only from the center speaker (if equipped), only from the Left/Right
speakers as a “phantom” center image, or various combinations of all three front
speakers.
Note: *PLII Music decode mode must be selected to adjust the dimension and
center width.
52
XDVD8285 OPERATION
DVD Setup Menu - Rating
Rating Setup Menu
Note:
A DVD disc must be inserted
to access these functions and
features.
With the unit in DVD mode, press AREA A (top left screen) to display the MAIN
menu. Press DVD Setup to access the DVD setup menu.
L
L
Press the RATING icon to select from the following menus:
Enable Parental Lock
Password
Press ---- to enter a password.
L
Setting Parental Lock
Password
Rating Setting
L
L
1. Enter a 4-digit code
2. Write the code down
3. Save in a safe place
When unlock symbol is displayed, select desired rating.
1. Kid Safe
2. G
3. PG
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult = DEFAULT
Parental Password Override
53
L
In the event you forget or loose your PARENTAL LOCK password, enter 9991.
XDVD8285 OPERATION
CD Operation - OSD Overview
1
2
3
4
20
5
6
19
18
7
8
17
16
15
CD Mode
14
13
12
11
10
9
From the main menu, touch the DISC icon on the screen, or press the DVD
button to select CD mode.
1
Current Source Indicator
Displays Source Currently Playing
2
Track Number Indicator
Displays current track number and total number of tracks on the disc.
3
Disc Title Indicator
Displays current disc title when available.
4
Track Title List
Displays up to 6 tracks on the disc in order, with track title, when available.
5
Repeat
icon to repeat current track. This icon will remain Touch the
highlighted until touched to disable.
6
Shuffle
icon to shuffle all tracks on the disc. This icon will Touch the
remain highlighted until touched to disable.
54
XDVD8285 OPERATION
CD Operation - OSD Overview
55
7
Scroll bar
Allows scrolling of track list.
8
Direct Select Keyboard
icon to display a numeric keyboard. Enter desired track
Touch the
number and touch OK to select it.
9
Track Scan
Touch the SCAN icon to listen to 10 seconds of each track in order. This icon will remain highlighted until touched to disable.
10
Fast Forward
Touch the icon to fast forward at 2x speed.
Each touch changes speed from 2x to 4x to 8x to 20x then to 1x play.
11
Fast Reverse
icon to fast reverse at 2x speed.
Touch the
Each touch changes speed from 2x to 4x to 8x to 20x then to 1x play.
12
Page Up
Touch the
icon to see the next 6 tracks on the disc.
13
Page Down
Touch the
icon to see the previous 6 tracks on the disc.
14
Stop
15
Play/Pause
Touch the
16
Volume Indicator
Indicates current volume level, controlled by rotary encoder.
17
Multi-Zone Indicator
Displays current status of Multi-Zone mode.
18
Loudness Indicator
Touch screen here to enter Audio Setup Menu.
19
EQ Indicator
Touch screen here to enter Audio Setup Menu.
20
Track Time Indicator
Shows how much time has elapsed in the current track.
Touch the
icon to stop the song where it is.
icon to temporarily stop or resume playback.
XDVD8285 OPERATION
CD Operation
Playing CD-DA discs
After inserting a CD disc, files will play in numerical order in the directory.
L
Selecting by Keypad
Touch
to display keypad. Enter desired track number and press OK.
L
Selecting by Direct Track Access
Touch desired track for DIRECT TRACK access.
L
L
Previous/Next Page
Touch to view UP/DOWN pages of available tracks.
56
XDVD8285 OPERATION
CD Operation
Page Up/Down
The Page Up and Page Down on-screen buttons can be used to see the rest of
the tracks on the CD. Use the Direct Select method to play a desired track.
From the remote control:
Press to display the next page.
Press to display the previous page.
Track Select
Press
Press
button to skip to the next track.
button to skip to the previous track.
From the remote control:
Press
to skip to the next track.
Press
to skip to the previous track.
Note: Press
or
button once will return to the beginning of the current
track. Press it a second time to skip to the previous track.
Direct Select
To select a desired track from the track title list, touch any track on the list.
Use the up and down arrows on screen to scroll through the tracks. Once
highlighted, simply touch the screen at the appropriate track.
Press Rapid Dial rotary encoder once.
• Select desired track by rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
From the remote control:
Press or to scroll through the tracks. When the correct track is
highlighted press OK.
Direct Track Entry
Touch the
icon to display a numeric keyboard. Enter desired track number
and touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired track number.
Play Control
You can use the Fast Forward or Fast Reverse on-screen buttons to speed up
the playback of a track. Each subsequent press of the button will change the
speed from normal to 2x to 4x to 8x to 20x and back to 1x.
Hold the
Hold the
button to fast forward.
button to fast reverse.
From the remote control:
Press
to fast forward.
Press
to fast reverse.
57
XDVD8285 OPERATION
CD Operation
Shuffle Mode
Touch the Shuffle button to shuffle all of the tracks on the CD. The Shuffle
button will be illuminated while Shuffle Mode is active. When the button is
illuminated, touching it a second time will disable Shuffle Mode.
Notes: The shuffled order of the songs is fixed, therefore the Track Select
operations will continue to operate properly within the shuffled order.
Therefore using Next Track will move to the next shuffled track, while
Previous Track will return to the start of the current track and then a second
press will return to the previously played track.
Repeat Mode
Touch the Repeat button to repeat a track. When Repeat Mode is active, the
Repeat button will be illuminated, and touching it again will disable Repeat
Mode.
From the remote control:
Press
to select Repeat. Press it a second time to disable Repeat.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Scan Mode
Touch SCAN on the screen to listen to all tracks on the CD for 10 seconds
at a time, starting from the first track on the CD. The Scan button will be
illuminated while Scan Mode is active. When the button is illuminated,
touching it a second time will disable Scan Mode.
From the remote control:
Press TITLE to activate and disable Scan Mode.
Play/Pause
Touching Play/Pause will temporarily stop playback of the current track.
Touching it again will resume playback,
Press PLAY/PAUSE to pause or resume the song.
From the remote control:
Press OK to temporarily stop and resume playback.
Stop
Touch Stop to stop playback of the current track. Pressing Play at this point
will resume playback. If Stop is touched a second time, then playback stops
completely and will restart from the beginning of the CD.
From the remote control:
Press to stop playback of the current song.
58
XDVD8285 OPERATION
MP3/WMA Operation - OSD Overview
1
2
3
4
5
6
23
7
8
22
9
21
10
20
19
18
MP3/WMA Mode
59
17
15 16 14
13
12
11
From the main menu, touch the DISC icon on the screen, or press the DVD
button to select MP3/WMA mode.
1
Current Source Indicator
Displays source currently playing.
2
Song Number Indicator
Displays current song number and total number of songs on the disc.
3
Master Song Number List
Shows the number of the song relative to the entire disc.
4
Folder
Displays the name of the currently selected folder.
5
Filename List
Displays up to 6 songs in the current folder in order, with filename.
6
File Type Indicator
Displays type of song file, either MP3 or WMA.
7
Repeat
icon to repeat current song or folder. This icon will remain
Touch
highlighted until touched a third time to disable.
8
Shuffle
icon to shuffle all songs on the disc. This icon will remain
Touch
highlighted until touched to disable.
XDVD8285 OPERATION
MP3/WMA Operation - OSD Overview
9
Scroll bar
Allows scrolling of song list.
10
Direct Select Keyboard
icon to display a numeric keyboard. Enter desired
Touch the
song number and touch OK to select it.
11
Fast Forward
icon to fast forward at 2x speed.
Touch
Each touch changes speed from 2x to 4x to 8x to 20x then to 1x play.
12
Next Folder
Pressing this button will select the next available folder.
13
Previous Folder
Pressing this button will select the previous available channel.
14
Page Up
Touch the
icon to see the next 6 songs in the folder.
15
Page Down
Touch the
icon to see the previous 6 songs in the folder.
16
Information
Displays available information for the current song.
17
Stop
18
Play / Pause
Touch
19
Volume Indicator
Indicates current volume level, controlled by rotary encoder.
20
Multi-Zone Indicator
Displays current status of Multi-Zone mode.
21
Loudness Indicator
Touch screen here to enter the Audio Setup Menu.
22
EQ indicator
Touch screen here to enter the Audio Setup Menu.
23
Elapsed Time Indicator
Shows the elapsed time of the current song.
Touch
icon to stop the song where it is.
icon to temporarily stop or resume playback.
60
XDVD8285 OPERATION
MP3/WMA Operation
Folder Select
Page Up/Down
From the remote control:
Press to display the next page.
Press to display the previous page.
Note: Continued operation of the Page Up and Page Down buttons will display the
next and previous folders, respectively once the songs in the current folder have
all been displayed.
Note that the Folder Select and Page Up/Down buttons will not select a song, but
simply display more songs on the disc, and if another song is not selected within
5 seconds of the last press then the screen will return to the currently playing
song/folder.
Song Select
Press
Press
button to skip to the next song.
button to skip to the previous song.
From the remote control:
Press
to skip to the next song.
Press
to skip to the previous song.
Note: Pressing the
or
button once will return to the beginning of the
current song. Pressing it a second time will skip to the previous song.
Direct Select
To select a desired song from the filename list, touch any of the displayed
filenames from the list.
Use the up and down arrows on screen to scroll through the songs. Once
highlighted, simply touch the screen at the appropriate name.
Press Rapid Dial rotary encoder once.
• Select desired track by rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
From the remote control:
Press or to scroll through the songs. When the correct song is highlighted
press OK.
Direct Song Entry
Touch the
icon to display a numeric keyboard. Enter desired song number
and touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired song number.
61
XDVD8285 OPERATION
MP3/WMA Operation
Song Control
You can use the Fast Forward on-screen button to speed up the playback
of a song. Each subsequent press of the button will change the speed from
normal to 2x to 4x to 8x to 20x and back to 1x.
Hold the
Hold the
button to fast forward.
button to fast reverse.
From the remote control:
Press
to fast forward.
Press
to fast reverse.
Note: Song control only works for MP3 type files and there is no audio output
while song control is active.
Shuffle Mode
Touch the Shuffle button to shuffle all of the songs on the disc. The Shuffle
button will be illuminated while Shuffle Mode is active. When the button is
illuminated, touching it a second time will disable Shuffle Mode.
Note: The shuffled order of the songs is fixed, therefore the Song Select
operations will continue to operate properly within the shuffled order.
Therefore using Next Song will move to the next shuffled song, while
Previous Song will return to the start of the current song and then a second
press will return to the previously played song.
Repeat Mode
Touch the Repeat button to repeat either a song or folder. The first touch
activates Song Repeat mode and a second touch activates Folder Repeat
mode. When either mode is active, the Repeat button will be illuminated, and
touching it a third time will disable Repeat Mode.
From the remote control:
Press
to select Song Repeat, Folder Repeat and Repeat Off modes.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Play/Pause
Touching Play/Pause will temporarily stop playback of the current song.
Touching it again will resume playback,
From the remote control:
Press OK to temporarily stop and resume playback.
Stop
Touch Stop to stop playback of the current song. Pressing Play at this point
will resume or restart playback from the beginning of the current song.
If Stop is touched a second time, then playback stops completely and will
restart from the beginning of the disc.
From the remote control:
Press to stop playback of the current song.
62
XDVD8285 OPERATION
SD Card Operation
1
2
3
4
5
6
23
7
8
9
22
21
10
20
19
18
SD Mode
63
17
15
16
14
13
12
11
From the main menu, touch the SD icon on the screen.
1
Current Source Indicator
Displays source currently playing.
2
Song Number Indicator
Displays current song number and total number of songs on the disc.
3
Master Song Number List
Shows the number of the song relative to the entire disc.
4
Folder
Displays the name of the currently selected folder.
5
Filename List
Displays up to 6 songs in the current folder in order, with filename.
6
File Type Indicator
Displays type of song file, either MP3 or WMA.
7
Repeat
icon to repeat current song or folder. This icon will
Touch the
remain highlighted until touched a third time to disable.
8
Shuffle
icon to shuffle all songs on the disc. This icon will
Touch the
remain highlighted until touched to disable.
XDVD8285 OPERATION
SD Card Operation
9
Scroll bar
Allows scrolling of song list.
10
Direct Select Keyboard
icon to display a numeric keyboard. Enter desired song
Touch the
number and touch OK to select it.
11
Fast Forward
Touch the icon to fast forward at 2x speed.
Each touch changes speed from 2x to 4x to 8x to 20x then to 1x play.
12
Next Folder
Pressing this button will select the next available folder.
13
Previous Folder
Pressing this button will select the previous available channel.
14
Page Up
Touch the
icon to see the next 6 songs in the folder.
15
Page Down
Touch the
icon to see the previous 6 songs in the folder.
16
Information
Displays available information for the current song.
17
Stop
18
Play / Pause
Touch the
19
Volume Indicator
Indicates current volume level, controlled by rotary encoder.
20
Multi-Zone Indicator
Displays current status of Multi-Zone mode.
21
Loudness Indicator
Touch screen here to enter the Audio Setup Menu.
22
EQ indicator
Touch screen here to enter the Audio Setup Menu.
23
Elapsed Time Indicator
Shows the elapsed time of the current song.
Touch the
icon to stop the song where it is.
icon to temporarily stop or resume playback.
64
XDVD8285 OPERATION
SD Card Operation
Folder Select
Page Up/Down
From the remote control:
Press to display the next page.
Press to display the previous page.
Note: Continued operation of the Page Up and Page Down buttons will display the
next and previous folders, respectively once the songs in the current folder have
all been displayed.
Note that the Folder Select and Page Up/Down buttons will not select a song, but
simply display more songs on the disc, and if another song is not selected within
5 seconds of the last press then the screen will return to the currently playing
song/folder.
Song Select
Press
Press
button to skip to the next song.
button to skip to the previous song.
From the remote control:
Press
to skip to the next song.
Press
to skip to the previous song.
Note: Pressing the
or
button once will return to the beginning of the
current song. Pressing it a second time will skip to the previous song.
Direct Select
To select a desired song from the filename list, touch any of the displayed
filenames from the list.
Use the up and down arrows on screen to scroll through the songs. Once
highlighted, simply touch the screen at the appropriate name.
Press Rapid Dial rotary encoder once.
• Select desired track by rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
From the remote control:
Press or to scroll through the songs. When the correct song is highlighted
press OK.
Direct Song Entry
Touch the
icon to display a numeric keyboard. Enter desired song number
and touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired song number.
65
XDVD8285 OPERATION
SD Card Operation
Song Control
You can use the Fast Forward on-screen button to speed up the playback
of a song. Each subsequent press of the button will change the speed from
normal to 2x to 4x to 8x to 20x and back to 1x.
Hold the
Hold the
button to fast forward.
button to fast reverse.
From the remote control:
Press
to fast forward.
Press
to fast reverse.
Note: Song control only works for MP3 type files and there is no audio output
while song control is active.
Shuffle Mode
Touch the Shuffle button to shuffle all of the songs on the disc. The Shuffle
button will be illuminated while Shuffle Mode is active. When the button is
illuminated, touching it a second time will disable Shuffle Mode.
Note: The shuffled order of the songs is fixed, therefore the Song Select
operations will continue to operate properly within the shuffled order.
Therefore using Next Song will move to the next shuffled song, while
Previous Song will return to the start of the current song and then a second
press will return to the previously played song.
Repeat Mode
Touch the Repeat button to repeat either a song or folder. The first touch
activates Song Repeat mode and a second touch activates Folder Repeat
mode. When either mode is active, the Repeat button will be illuminated, and
touching it a third time will disable Repeat Mode.
From the remote control:
Press
to select Song Repeat, Folder Repeat and Repeat Off modes.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Play/Pause
Touching Play/Pause will temporarily stop playback of the current song.
Touching it again will resume playback,
From the remote control:
Press OK to temporarily stop and resume playback.
Stop
Touch Stop to stop playback of the current song. Pressing Play at this point
will resume or restart playback from the beginning of the current song.
If Stop is touched a second time, then playback stops completely and will
restart from the beginning of the disc.
From the remote control:
Press to stop playback of the current song.
66
XDVD8285 OPERATION
JPEG Operation - OSD Overview
1
7
2
3
JPEG Mode
67
4
5
6
JPEG mode works a bit differently from the other modes. There is no separate
JPEG mode, rather this mode is accessed within either SD mode or MP3/WMA
mode. Whenever a picture is present on an SD card or CD, the unit will switch to
the JPEG mode to view it. Each picture is displayed on the screen for 5 seconds,
unless paused. JPEG mode will automatically exit when the next file is not a
picture, or when STOP is pressed.
1
Touching this zone will bring up the Main Menu for the unit.
2
Touching this zone will skip to the previous file.
3
Stop
Touch
to stop viewing at the current file.
4
Rotate Right
Touch
to rotate the image 90º clockwise.
5
Rotate Left
Touch
to rotate the image 90º counterclockwise.
6
Touching this zone will bring up the on-screen buttons (3, 4 & 5).
7
Touching this zone will skip to the next file.
XDVD8285 OPERATION
JPEG Operation
Play/Pause
Press PLAY/PAUSE to stop the viewer on a specific picture or to resume.
From the remote control:
Press OK to temporarily stop and resume the viewer.
Note: Unlike the music player, when the viewer is paused, moving to the next
or previous picture will not automatically resume the slideshow.
Next/Previous
Touch Area D to skip to the next file/image.
Touch Area B to skip to the previous file/image.
Press
Press
to skip to the next file/image.
to skip to the previous file/image.
From the remote control:
Press
to skip to the next file/image.
Press
to skip to the previous file/image.
Stop
Touch to stop the viewer and return to the filename list. Pressing Play at
this point will resume playback from the current picture. If Stop is touched
a second time, then playback stops completely and will restart from the
beginning of the disc/card.
From the remote control:
Press to stop the viewer.
Rotate Right/Left
Touch
or
to rotate the image 90º clockwise or counterclockwise.
From the remote control:
Press ANGLE to rotate the image 90º clockwise.
Zoom Mode
From the remote control:
Press the ZOOM button to activate Zoom Mode.
Each subsequent press of the button will change the magnification from
normal to 4/3 to 3/2 to 2 to 3 to 1/2 to 3/4 and back to normal.
When Zoom Mode is active, and the image is larger than the screen, the
arrows on the remote will pan the screen up, down, right and left.
Note: Zoom Mode is only active when the viewer is paused.
Thumbnail View
From the remote control:
Press TITLE to activate Thumbnail View.
The screen will display up to 9 mini-pictures at a time, starting from the
current picture. Select desired picture with the arrows and press OK to view.
Next and Previous will display more mini-pictures, if available.
68
XDVD8285 OPERATION
Media Compatibility
Media Compatibility
The following types of discs/files are compatible:
• CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW
• CD-DA, DVD Video
• MP3 data
• WMA data
• JPG images
The following types of discs/files are not compatible:
• WMA files that are protected by DRM (Digital Rights Management)
• WMA lossless format
• Discs recorded with Track At Once or packet writing
• MP3 PRO format
• MP3 playlists
• WAV format
• WMV format
• DivX format
• AVI format
• MPG format
Some recordable DVDs and CDs may be incompatible with this unit,
depending on media type and recording method.
Playback Order
Compatible Recording Formats
MP3/WMA playback sequence is based on recorded order of files and begins
in the root folder of the disc. Any empty folders or folders that do not include
MP3/WMA files are skipped. This unit may not play files in the order they
were recorded in. Refer to your recording software’s user’s manual for more
information.
• ISO9660 level 1
• ISO9660 level 2
• Yellow Book MODE 1
• Yellow Book MODE 2 FORM 1
• Multi session
• Maximum files - 1500
• Maximum folder levels - 8
• MPEG-1/2 Audio Layer-3
ISO9660 standards:
• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and “_” (underscore). Some characters may not be displayed correctly,
depending on the character type.
• This device can play back discs in Joliet and other standards that conform
to ISO9660. MP3/WMA written in the formats other than the above may
not play and/or their file names or folder names may not be displayed
properly.
69
XDVD8285 OPERATION
Media Compatibility
Additional MP3/WMA Information
An internal buffer provides ESP (Electronic Skip Protection) to virtually
eliminate skipping.
When playing a disc recorded with regular audio files (CD-DA or .WAV) and
MP3/WMA files, the unit will play the MP3/WMA files only.
Only MP3 files with filename extension (.mp3) can be played.
Only WMA files with filename extension (.wma) can be played.
Do not attempt to play discs which contain non-MP3/WMA files with the
MP3/WMA extension.
Sampling Frequency Rates
MP3
32kHz ~ 48kHz
WMA
32kHz ~ 48kHz
Transfer Bit rates
MP3
WMA
40kbps ~ 320kbps constant
Variable bit rates
40kbps ~ 192kbps constant
Variable bit rates
Note:
Some files may not play or be displayed correctly, depending on sampling
rates and bit rates.
Recommended Settings
For best results, use the following settings when burning an MP3 disc:
128kbps or higher constant bit rate
44.1kHz or higher sampling frequency
For best results, use the following settings when burning a WMA disc:
64kbps or higher constant bit rate
44kHz or higher sampling frequency
70
XDVD8285 OPERATION
iPod Operation - OSD Overview (Optional)
1
2
3
4
5
6
7
25
8
9
10
24
23
22
21
11
12
20
iPod Mode
71
19
17 18 16
15
14
13
From the main menu, touch the iPod icon on the screen.
1
Current Source Indicator
Displays source currently playing.
2
Song/Group Number Indicator
Displays current song number and total number of songs/groups.
3
Song Number List
Shows the number of the song relative to the current group.
4
Artist
Displays the name of the artist of the current song.
5
Song/group List
Displays up to 6 songs/groups in order.
6
Scroll bar
Allows scrolling of song or group list.
7
Video Mode
Allows viewing of video files.
8
Repeat
Touch the
icon to repeat current song.
XDVD8285 OPERATION
iPod Operation - OSD Overview (Optional)
9
Shuffle
Touch the
icon to shuffle the songs in the current group.
10
Group Select Mode
Allows selection of songs by various groups.
11
Direct Select Keyboard
icon to display a numeric keyboard for song selection.
Touch the
12
Return/Back
Touch
13
Scan Mode
Pressing this button will scan through all songs for 10 seconds.
14
Fast Forward
Touch the
icon to fast forward at 2x speed.
15
Rewind
Touch the
icon to rewind at 2x speed.
to return to the previous group/menu.
16
Page Up
Touch the
icon to see the next 6 songs in the folder.
17
Page Down
Touch the
icon to see the previous 6 songs in the folder.
18
Album
Displays the name of the album for the current song.
19
Stop
20
Play / Pause
Touch the
21
Volume Indicator
Indicates current volume level, controlled by rotary encoder.
22
Multi-Zone Indicator
Displays current status of Multi-Zone mode.
23
Loudness Indicator
Touch screen here to enter the Audio Setup Menu.
24
EQ indicator
Touch screen here to enter the Audio Setup Menu.
25
Elapsed Time Indicator
Shows the elapsed time of the current song.
Touch the
icon to stop the song where it is.
icon to temporarily stop or resume playback.
72
XDVD8285 OPERATION
iPod Operation (Optional)
Group Select Mode
The songs in the iPod are organized by groups. Touching the
screen will put the unit into Group Select Mode:
on the
Once in Group Select Mode select one of the group types from the menu, then
select an item in that group. (For example, select the Artist group and the display
will change to a list of available artists. Then select an artist from this list to hear
all songs from that artist.) Select the Song group to hear all songs on the iPod.
Touch the
on-screen button to go back to a previous menu. (For example,
when playing songs from a particular artist in Artist group mode, touch the
Return/Back icon to return to the list of all available artists.)
Return/Back
Page Up/Down
As there are usually more than 6 songs in a given group, the Page Up and Page
Down on-screen buttons can be used to see the rest of the songs in the current
group. Then use the Direct Select method to play a song from that group.
The Page Up and Page Down on-screen buttons can be used to preview the next/
previous pages.
From the remote control:
Press to display the next page.
Press to display the previous page.
Note that the Page Up/Down buttons will not select a song, but simply display
more songs in the group, and if another song is not selected within 5 seconds of
the last press then the screen will return to the currently playing song/group.
From the remote control:
Press
to skip to the next song.
Press
to return to the beginning of the current song. A second press will skip
to the previous song
Song Select
To select a desired song from the song list, touch any of the displayed songs in
the list.
Use the up and down arrows on screen to scroll through the songs. Once
highlighted, simply touch the screen at the appropriate name.
Direct Select
Press Rapid Dial rotary encoder once.
• Select desired track by rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
From the remote control:
Press or to scroll through the songs. When the correct song is highlighted
press OK.
73
XDVD8285 OPERATION
iPod Operation (Optional)
Direct Song Entry
Touch the
icon to display a numeric keyboard. Select desired song
number within the current group and touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired song number.
Song Control
You can use the Fast Forward and Fast Reverse on-screen buttons to play
a song forwards or backwards at a higher speed. Touch the same button a
second time or press Play to return to normal playback.
From the remote control:
Press
to fast forward.
Press
to fast reverse.
Shuffle Mode
Touch the Shuffle button to shuffle the songs in the current group. The Shuffle
button will be illuminated while Shuffle Mode is active. When the button is
illuminated, touching it a second time will disable Shuffle Mode.
Repeat Mode
Touch the Repeat button to repeat a song. When Repeat mode is active, the
Repeat button will be illuminated, and touching it again will disable Repeat
Mode.
From the remote control:
Press
to select Repeat. Press it a second time to disable Repeat.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Play/Pause
Touching Play/Pause will temporarily stop playback of the current song.
Touching it again will resume playback,
Press the PLAY/PAUSE button to pause or resume the song.
From the remote control:
Press OK to temporarily stop and resume playback.
Stop
Touch Stop to stop playback of the current song.
From the remote control:
Press to stop playback of the current song.
74
XDVD8285 OPERATION
iPod Operation (Optional)
Playing photo or video files from iPod
Notes:
VIDEO/PHOTO FILES are only
compatible with G5 iPod.
The iPod photo/video display of
the in-dash unit will not operate
while the vehicle is moving. This
is a safety feature to prevent
driver distraction. iPod photo/video
functions will only operate when
vehicle is in Park and the parking
brake is engaged. It is illegal in
most states for the driver to view
video while the vehicle is in motion.
L
• Touch VIDEO icon, iPod will disconnect and wait for video signal.
• Make sure VIDEO OUTPUT is turned on in your iPod. Consult your iPod
owner's manual for details.
• Press PLAY on your iPod, photos or video will appear on the TFT.
L
Releasing Video control from iPod
iPod will reconnect
75
• Touch AREA F (upper right screen) to reconnect iPod to play music again.
XDVD8285 OPERATION
iPod Operation (Optional)
Selecting Music By:
Playlist
Artist
Album
Genre
Song
L
Touch desired Folder, music will begin to play after selection.
Character Support
Only alphanumeric characters can be displayed (ASCII type).
Artist Name and Album name will only be displayed if included with the
song.
iPod Compatibility
The following models are supported:
• Third generation iPod - Version 2.3
• Fourth generation iPod - Version 3.1.1
• Fifth generation iPod - Version 1.1.2
• iPod Photo - Version 1.2.1
• iPod Mini - Version 1.4.1
• iPod Nano - Version 1.2.0
Refer to your iPod instruction manual for details on how to obtain the latest
software.
76
XDVD8285 OPERATION
XM Radio - OSD Overview (Optional)
1
2
3
4
5
6
23
22
21
7
20
19
8
18
17
16
XM Mode
77
15
14 13 12
11
10
9
From the main menu, touch the XM icon on the screen.
1
Current Source Indicator
Displays source currently playing.
2
Signal Strength Indicator
Displays the strength of XM reception.
3
Current Station Indicator
Displays the current XM channel number.
4
Channel Number/Preset Number List Display
Standard mode: Shows a list of the available XM channels.
Preset mode: Shows the preset list by preset number.
5
Name
Displays the name of the artist of the current song.
6
Channel List/Preset list Display
Standard mode: Shows the names of the XM channels.
Preset mode: Shows the names of the stored presets.
Touch screen to select a channel. Touch and hold screen to store
presets in Preset mode.
7
Display Scroll Bar
Allows scrolling of channel list.
XDVD8285 OPERATION
XM Radio - OSD Overview (Optional)
8
Direct Select Keyboard
Displays on-screen keyboard to select a channel by number.
9
Channel Scan
Pressing this button will scan through all available channels, starting
from the current channel, pausing for 10 seconds on each channel.
10
Category Next Channel
Pressing this button will select the next available channel in the current category.
11
Category Previous Channel
Pressing this button will select the previous available channel in the current category.
12
Next Channel
Pressing this button will select the next available channel.
(This function can also be performed by pressing .)
13
Title
14
Previous Channel
Pressing this button will select the previous available channel.
(This function can also be performed by pressing .)
15
Category View
Pressing this button will display a list of available categories. A
channel can then be selected within a specific category.
16
Preset Bank Select
Pressing this button in Standard mode will select Preset mode
and display the first bank of 12 presets. Each subsequent press
will change to the next bank: XM-1, XM-2, XM-3, then back to XM
Standard mode.
17
Volume Indicator
Indicates current volume level, controlled by rotary encoder.
18
Multi-Zone Indicator
Displays current status of Multi-Zone mode.
19
Loudness Indicator
Touch screen here to enter the Audio Setup Menu.
20
EQ indicator
Touch screen here to enter the Audio Setup Menu.
21
Current Category Indicator
Shows the category of the current channel.
22
Current Station Name
Displays the name of current channel.
23
Bank Indicator
Shows which bank is currently displayed.
Displays the title of the current song.
78
XDVD8285 OPERATION
XM Radio Operation (Optional)
Activating Your XM Tuner
(when connected)
1. Select XM mode.
2. Verify channel 1 (XM Preview Channel) is playing.
3. Select Channel 0. The XM tuner's eight character Radio ID number will appear
at the top of the screen.
The Radio ID number is also located on the XM tuner (sold separately).
4. Record the number here for future reference:
5. Activate your XM Satellite Radio service by logging on to
http://www.xmradio.com/activation or call 1-800-967-2346.
Note: You will need to keep your unit turned on for at least one hour after
requesting activation to receive the full channel line-up.
Standard/Preset Mode
Touch
on the screen to switch between Standard Mode and Preset Mode.
In Standard Mode, XM is displayed in location 21 on the screen. In Preset Mode,
location 21 will display either XM-1, XM-2 or XM-3 to denote which preset bank is
selected. Each press of the button will change the display from XM to XM-1 to
XM-2 to XM-3 and back to XM.
From the remote control:
Press the BAND button.
Channel Select
Touch CH+ or press
Touch CH- or press
to select the next channel.
to select the previous channel.
From the remote control:
Press
to select the next channel.
Press
to select the previous channel
Note: The on-screen
category only.
and
buttons will select channels within the current
To select a desired channel from the channel/preset channel list, touch any of the
displayed channel names from the list.
Direct Tuning
Use the up and down arrows on screen to scroll through the channels. Once
highlighted, simply touch the screen at the appropriate channel.
Use Rapid Dial rotary encoder to select desired channel.
• Select desired channel by rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
79
XDVD8285 OPERATION
XM Radio Operation (Optional)
From the remote control:
Press or to scroll through the channels. When the desired channel is
highlighted press OK.
Direct Channel Entry
Touch the
icon to display a numeric keyboard. Enter desired channel
number and touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired channel number.
Category Mode
Touch the
icon to display a list of categories.
Once a category is selected, only the channels in that category will be
displayed until the icon is touched again. However, the CH- and CH+, as well
as the
and
on the remote will cycle through all available channels.
Touch
to exit from Category Mode.
To select a desired category from the category list, touch any of the displayed
categories from the list.
Use the up and down arrows on screen to scroll through the category list.
Once highlighted, simply touch the screen at the appropriate category.
Use Rapid Dial rotary encoder to select desired category.
• Select desired category by rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
From the remote control:
Press or to scroll through the categories. When the desired category is
highlighted press OK.
Storing Presets
There are 36 presets available in 3 bands.
First, put the unit into Preset Mode and select a bank of presets (XM-1, XM-2,
or XM-3). After finding a channel that you would like to store in memory,
touch and hold the screen on any of the presets in the preset channel list until
it turns yellow.
Channel Scan
Touch SCAN on the screen and it will tune you to all channels available for 10
seconds at a time. Touch SCAN again to disable. Note that if Category Mode is
selected, Channel Scan will still scan through all available channels, not just
the ones displayed on screen.
80
XDVD8285 OPERATION
Bluetooth® - OSD Overview (Optional)
1
2
3
4
5
11
6
10
9
8
Before using the Bluetooth
Bluetooth Mode
81
7
Select the Bluetooth option in the General setup and select On to activate the
Bluetooth feature. Refer to page 21 for more details.
From the main menu, touch the Bluetooth icon on the screen or, press the
Bluetooth icon at the top of the screen. The Bluetooth function must be turned on
for the Bluetooth icon to appear at the top of the screen.
1
Current Source Indicator
Displays source or current mode.
2
Talk button
3
Display Indicator
Phone number display and call status indicator.
4
Bluetooth status indicator
When the Bluetooth function is Off, the indicator is black.
When the Bluetooth function is On and no phone is connected
(paired) to the unit, the indicator will flash blue.
When the Bluetooth function is On and a phone is connected
(paired) to the unit, the indicator is blue.
5
Return button
Touch to RETURN to previous screen.
6
Keypad interface
Press 0-9, *, # and + to enter desired phone number.
Press C to clear the last digit.
Press to answer an incoming call or to place an outgoing call.
XDVD8285 OPERATION
Bluetooth® - OSD Overview (Optional)
7
Audio Transfer Button
Press to transfer audio between the head unit and mobile phone.
8
End button
9
Setup Menu Icon
Press to access Bluetooth setup menu.
10
Phone book Icon
Press to access the phone book menu.
11
Keypad Interface Icon
Press to display the keypad interface.
Press to end a call in progress or to reject an incoming call.
Bluetooth Setup Menu
Bluetooth Setup Menu matrix
Settings
Pairing
Default
Yes
Auto Answer
Off
Connect
Manual
Options
Yes
(Pair)
Off
On
Manual
Auto
Function
Press Yes to begin the pairing function. Press Yes again to cancel
the pairing process. See page 83 for more details.
You must press the Talk button to answer an incoming call.
The head unit will automatically answer incoming calls.
You must connect the phone to the head unit manually each time.
The head unit will automatically connect to a previously paired
phone. See page 83 for more details.
Notes: Some Bluetooth approved devices may not communicate or work properly with this head unit, depending on
the features or specifications of the device. During hands free operation, some noise may be heard when using a
mobile device with this head unit, depending on the mobile device and or the communication environment.
82
XDVD8285 OPERATION
Bluetooth® - Setup Menu (Optional)
Pairing
Before you can use a mobile device with this head unit, it must be
authenticated. This is also referred to as "pairing" a device.
Note: Please make sure that Bluetooth is activated on your mobile device before
you begin the pairing process. Refer to the owner's manual of your mobile device
for more details.
Step 1
Access Bluetooth setup menu and press Yes to begin the pairing process. The
head unit will display "Wait Pairing.." and will search for any nearby Bluetooth
device. If you have more than one Bluetooth device, please make sure only the
device you want to connect to is powered on. Refer to the owner's manual of your
mobile device for more details on searching for Bluetooth devices.
Step 2
When prompted by your mobile device, enter 1234 for the PIN or pass code.
The device name of the head unit will show up as "MM-BT G1". After the pairing
process has completed, the Bluetooth icon will turn solid blue.
Notes
It is possible to search for previously paired Bluetooth devices from this head
unit. It may be possible to search for this head unit from other Bluetooth enabled
devices.
To search for this head unit from another device (when already connected),
press Yes under the Pairing function. The currently connected device will be
disconnected and pairing to the new device will be possible. It may also be
possible to disconnect this head unit from another mobile device.
This unit can remember the last 4 paired mobile devices. It is only possible to
connect to one Bluetooth mobile device at a time.
When pairing to more than 4 mobile devices, the head unit will delete the phone
that was least used to allow for the new pairing (connection). The mobile device
that is initially connected will always be remembered (default phone).
The MUTE function can not be used during Bluetooth operation. If MUTE is active
when a call is received, the audio will automatically be transferred to the mobile
device.
Auto Answer
Connect
83
The head unit will automatically answer incoming calls when the Auto Answer
feature is set to On. If the Auto Answer feature is set to Off, the Talk button must
be pressed to answer an incoming call.
The head unit will automatically connect to a previously connected mobile device
when the Connect feature is set to Auto. If the Connect feature is set to Manual,
the head unit will not automatically connect to any mobile device. Set the Connect
feature to Manual when you do not want to connect to any Bluetooth mobile
device.
XDVD8285 OPERATION
Bluetooth® - Operation (Optional)
Phone Book Menu
Incoming Call Screen
Dialed Calls
Press Dialed Call to retrieve the list of dialed calls from the mobile device.
"Searching", then "Loading dialed phone book" will be displayed during the
retrieval process followed by "The phone book is done". Touch the desired name
to call. Press the page up/down buttons to navigate through the pages.
Received Calls
Press Received Call to retrieve the list of received calls from the mobile device.
"Searching", then "Loading received phone book" will be displayed during the
retrieval process followed by "The phone book is done". Touch the desired name
to call. Press the page up/down buttons to navigate through the pages.
Missed Calls
Press Missed Call to retrieve the list of missed calls from the mobile device.
"Searching", then "Loading missed phone book" will be displayed during the
retrieval process followed by "The phone book is done". Touch the desired name
to call. Press the page up/down buttons to navigate through the pages.
Making a Phone Call
Answering a Phone Call
Ending a Phone Call
It is possible to make a phone call three different ways:
1. Enter the desired phone number using the keypad interface, then press the
Talk button.
2. Enter the desired phone number using the numeric keypad on the main
remote control, then press OK. (Bluetooth mode must be selected first.)
3. Select a previous call from the phone book menu.
The head unit will answer calls automatically if the Auto Answer feature is set
to On. Otherwise, the Talk button must be pressed to answer an incoming call.
During an incoming call, the audio is muted for the current source and the
incoming call screen will be displayed. Adjust the volume during the call using
the rotary encoder volume control.
Press the End button on screen or the ESC button on the main remote control to
end a call in progress or to reject an incoming call.
84
XDVD8285 OPERATION
General Operation - Multi-Zone Menu
Multi-Zone Menu Access
There are two methods to access the Multi-Zone menu
• Press the MENU button on the front panel, then press Multi-Zone
• Touch the upper left corner of the touch screen, then press Multi-Zone
1
2
3
4
13
L
12
11
10
9
8
Touch Access Buttons
1
2
3
4
5
6
7
8
9
10
11
12
13
Rapid Dial
85
7
6
5
Touch to set CD/DVD mode as the Multi-Zone mode, (CD/DVD must be inserted)
Touch to set CAMERA mode as the Multi-Zone mode, if optional camera isn't
connected then "No Video Signal" will be displayed.
Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first). Refer
to page 21 for more details.
Touch to RETURN to previous screen
Touch to set the Multi-Zone mode in STANDBY (Off).
Notes: When the Multi-Zone mode is set to STANDBY (Off), the video signal from
the 6.5" TFT is shown by default and the Multi-Zone audio is disabled.
Press and hold the MODE button on the front panel for more than 2
seconds to change the Multi-Zone mode from STANDBY (Off) to active.
Touch to set AUXILIARY A/V INPUT mode as the Multi-Zone mode.
Touch to set SD mode as the Multi-Zone mode, (SD card must be inserted)
Touch to access SCREEN SETUP menu
Touch to access GENERAL SETUP menu
Touch to access ASP Config menu
Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function)
Touch to access MULTI-ZONE source menu
Touch to access MAIN source menu
RAPID DIAL can also control touch screen functions from the multi-zone menu
• Select desired function rotating clockwise or counter-clockwise
• Function will be outlined in yellow
• Press to confirm/ENTER
XDVD8285 OPERATION
General Operation - Multi-Zone Menu
Multi-Zone Operation
Independent sources can be played simultaneously on the unit. For example, the
AM/FM tuner mode can be selected for the front zone while DVD video is selected
for the Multi-Zone source (for headrest monitors, overhead monitors, etc.).
Select a Source for the
Multi-Zone
1. Press the MENU button, then touch Multi-Zone to access the Multi-Zone menu.
Select desired Multi-Zone source.
2. Press MODE on the Multi-Zone remote to select desired Multi-Zone source.
3. Press and hold the MODE button on the front panel to turn the Multi-Zone on.
Exit Rear-Zone
1. Touch STANDBY on the Multi-Zone menu.
2. Press and hold the MODE button on the front panel to turn the Multi-Zone off.
Notes:
If DVD is selected as the front zone source, SD Card is not available for the MultiZone source.
If SD Card is selected as the front zone source, DVD is not available for the
Multi-Zone source.
Since the multimedia processor is shared between optical (disc) and SD Card
reader, only one or the other source can be selected at a time.
Selecting a Source for the
Front Zone
1. Press the MENU button, then touch desired front zone source.
2. Press MODE on the main remote to select desired front zone source.
Notes:
AM/FM tuner, XM Radio and iPod models will change to a “blue screen”
background when any optical mode (DVD, CD, MP3/WMA) or SD Card is selected as
the Multi-Zone source.
Front Zone Standby
To conserve the LCD backlight lifespan or to eliminate glare while night driving,
press STANDBY. The TFT screen will black out, however all other operations
continue to operate. Press any button except VOLUME or touch the screen again to
return to normal viewing.
86
XDVD8285 OPERATION
Multi-Zone - AM/FM Tuner Operation
15
1
14
2
13
3
12
4
11
10
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
87
8
7
6
5
Clock indicator - displays current time.
Multi-zone mode indicator - displays current multi-zone source.
Preset page up/down arrows - press to select the next or previous preset page.
Preset number list display - shows the preset station list by frequency. Touch
frequency to select a preset. Touch and hold frequency to store presets.
Tuner scan - touch to scan through all available stations in the current band,
pausing for 10 seconds on each station. Touch again to cancel. SCAN will change
to yellow when the scan function is active.
Tune frequency up - touching this icon will tune the radio to a higher frequency by
one frequency step.
Tune frequency down - touching this icon will tune the radio to a lower frequency
by one frequency step.
Preset scan/auto station store - touching this icon will scan through all presets in
the current band. Holding this button for more than 2 seconds will automatically program the 12 strongest stations available into the presets in the current band.
AS will change to yellow during the auto station store process.
Band - Touch band icon repeatedly until the desired band is displayed FM1,
FM2, FM3, or AM.
Local/DX tuning mode - press to select between local or distance tuning.
Stereo indicator - shows that the frequency selected is received in stereo. ST will
change to red during stereo reception.
Current station indicator - indicates current frequency.
Band indicator - shows current band FM1, FM2, FM3, or AM.
Preset indicator - shows what preset has been selected.
Main zone mode indicator - displays current main zone source.
XDVD8285 OPERATION
Multi-Zone - XM Radio Operation
1
12
2
11
10
9
8
7
6
5
1
2
3
4
5
6
7
8
9
10
11
12
Channel Up
Channel Down
4
3
Clock indicator - displays current time.
Multi-zone mode indicator - displays current multi-zone source.
Channel scan - touch to scan through all available channels, pausing for 10
seconds on each channel. Touch again to cancel. SCAN will change to green when
the scan function is active.
Category next channel - pressing this button will select the next available channel
in the current category.
Category previous channel - pressing this button will select the previous available
channel in the current category.
Bank indicator - shows which XM bank is currently displayed.
Name - displays the name of the artist of the current song.
Title - displays the title of the current song.
Category - displays the category of the current channel.
Channel Name - displays the name of current channel.
Channel Number - displays the number of the current channel.
Main zone mode indicator - displays current main zone source.
Touch area D to select the next available channel.
(This function can also be performed by pressing
.)
Touch area C to select the previous available channel.
(This function can also be performed by pressing .)
Refer to page 39 for more details.
88
XDVD8285 OPERATION
Multi-Zone - iPod Operation
1
13
2
12
11
10
9
8
7
1
2
3
4
5
6
7
8
9
10
11
12
13
Next Song
Previous Song
Note:
89
6
5
4
3
Clock indicator - displays current time.
Multi-zone mode indicator - displays current multi-zone source.
Song scan - touch to scan through all available songs, pausing for 10 seconds
on each song. Touch again to cancel. SCAN will change to green when the scan
function is active.
Video mode - touch to access video mode. iPod will disconnect and wait for video
signal. Press VID again to cancel. Refer to page 75 for more details.
Repeat - touch to repeat current song, touch again to cancel. REP will change to
green when the repeat function is active.
Stop - Touch to stop the song where it is. STOP will change to green.
Play - Touch PLAY to temporarily stop playback. Touch PLAY again to resume
playback. PLAY will change to white during pause.
Album- displays the name of the album of the current song.
Artist - displays the name of the artist of the current song.
Song - displays the name of the current song.
Time - displays the elapsed time of the current song.
Track- displays the track number of the current song.
Main zone mode indicator - displays current main zone source.
Touch area D to select the next song.
(This function can also be performed by pressing
.)
Touch area C to return to the beginning of the current song.
Touch area C again to select the previous song.
(This function can also be performed by pressing .)
Refer to page 39 for more details.
Some characters may not be displayed properly in multi-zone iPod mode.
XDVD8285 WARRANTY
Limited One Year Warranty
This warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
Dual Electronics Corp. warrants this product to the
original purchaser to be free from defects in material
and workmanship for a period of one year from the date
of the original purchase.
Dual Electronics Corp. agrees, at our option, during
the warranty period, to repair any defect in material or
workmanship or to furnish an equal new, renewed or
comparable product (whichever is deemed necessary) in
exchange without charges, subject to verification of the
defect or malfunction and proof of the date of purchase.
Subsequent replacement products are warranted for the
balance of the original warranty period.
Who is covered? This warranty is extended to the
original retail purchaser for products purchased and
used in the U.S.A.
What is covered? This warranty covers all defects in
material and workmanship in this product. The following
are not covered: installation/removal costs, damage
resulting from accident, misuse, abuse, neglect, product
modification, improper installation, incorrect line voltage,
unauthorized repair or failure to follow instructions
supplied with the product, or damage occurring during
return shipment of the product.
What to do?
1. Before you call for service, check the troubleshooting
guide in your owner’s manual. A slight adjustment of
any custom controls may save you a service call.
2. If you require service during the warranty period,
you must carefully pack the product (preferably in the
original package) and ship it by prepaid transportation
with a copy of the original receipt from the retailer to
an authorized service center.
3. Please describe your problem in writing and include
your name, a return UPS shipping address (P.O. Box
not acceptable), and a daytime phone number with
your shipment.
4. For more information and for the location of the
nearest authorized service center please contact us by
one of the following methods:
• Call us toll-free at 1-866-382-5476
• E-mail us at cs@dualav.com
Exclusion of Certain Damages: This warranty is
exclusive and in lieu of any and all other warranties,
expressed or implied, including without limitation
the implied warranties of merchantability and fitness
for a particular purpose and any obligation, liability,
right, claim or remedy in contract or tort, whether or
not arising from the company’s negligence, actual or
imputed. No person or representative is authorized
to assume for the company any other liability in
connection with the sale of this product. In no event
shall the company be liable for indirect, incidental or
consequential damages.
90
XDVD8285 OPERATION
Troubleshooting
General
Problem
Unit will not turn on
(no power)
Cause
Action
Yellow wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC)
Red wire not connected or incorrect voltage
Black wire not connected
Check connection to ground
Fuse blown
Replace fuse
Unit has power
(but no sound)
Speaker wires not connected
Check connections at speakers
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from each other and chassis
ground
Unit blows fuse
Yellow or red wire touching chassis ground
Check for pinched wire
Speaker wires touching chassis ground
Check for pinched wire
Incorrect fuse rating
Use fuse with correct rating
Parking brake safety circuit not connected
Parking brake not applied
Check connections at parking brake
Apply parking brake as described on page 36
Reverse circuit not connected
Vehicle is not in reverse
Check connections at reverse lamp
Select reverse gear
Unit has audio
(but no video)
No video display
(when in reverse)
DVD does not start playback Physical defect in media
Wrong region
IR remote does not work
Excessive skipping
Bad Disc appears
on display
Incorrect Region Code
appears on display
Front panel will not
open/close
Check media for scratches
Use discs labeled "Region 1" or "All" only.
Dead battery
Replace battery
Unit is not mounted correctly
Check mounting sleeve
Physical defect in media
Check media for scratches
Focus error or disc is in upside down
Press eject or RESET
Region code error
Use only DVDs labeled “Region 1” or “All” only.
Front panel obstructed
Remove the obstacle and press
open/close sequence.
to resume the monitor
XM Radio
Problem
Action
You can not receive any
XM channels
Your XM Radio receiver is not activated
Contact XM as described on page 79
You can not tune into a
specific XM channel
You may not be authorized to receive that
channel
Verify your subscription with XM
Contact XM as described on page 79
No Signal appears on
display
The XM signal is blocked
Move vehicle from obstructed area
(such as inside a tunnel or a garage)
This message may appear when driving
inside a tunnel or under obstacles
Make sure the antenna has a clear view of the sky
The XM antenna is not connected
The antenna cable is damaged
Check XM antenna connection
Check for pinched or cut antenna cable
The selected channel is not in service
Try another channel
This information may not be available for
some music channels, news channels, or
when there is no song playing
This condition is normal, there is
nothing wrong with your receiver
Check Antenna appears on
display
OFF AIR appears on
display
No song title or artist name
is displayed
91
Cause
XDVD8285 OPERATION
Troubleshooting
Bluetooth
Problem
Cause
Action
Please connect first
appears in the display
There is no mobile device connected to the head unit
Pair and or connect a mobile device to the head unit as
described on page 83
Bluetooth function is not active on the head unit
Activate Bluetooth function as described on page 21
Bluetooth function is not active on the mobile device
Refer to the owner's manual of your mobile device
Mobile device will not
connect to the head unit
A mobile device is already connected to the head unit Disconnect current mobile device first, then connect
This head unit can only be connected to one device at desired mobile device
a time
ERROR! Connect Timeout The time limit for the pairing mobile device has been
appears in the display
reached
Pair the mobile device within 120 seconds
Pairing Fail appears in
the display
The attempted pairing process has failed
Retry the pairing process again
Mobile device will not
connect to the head unit
automatically
The Connect function is set to Manual. When the
Connect function is set to Manual, the head unit will
not connect to any mobile device automatically
Set Connect function to Auto as described on page 82
Ring tone volume is turned down
Increase the volume of the ring tone using the rotary
encoder during the ringing process
MUTE function is activated on the head unit
Press MUTE to cancel the mute function and resume
audio
Possible road noise or interior interference
Close all open windows and turn off any fans or A/C
Microphone opening on the front panel is obstructed
Clear any obstacles in front of microphone opening
Audio is routed to the mobile device
Press Audio Transfer to allow audio from the phone to
be heard through the speakers
Auto Answer function is set to On
Set Auto Answer function to Off as described on page
82
Ring tone can not be
heard through the
speakers
Echo or noise is heard
during a phone call
Call is connected
(but no audio can be
heard through the
speakers)
Call is answered
automatically
Caller ID does not appear The calling mobile device is not set to send the Caller Some devices may not communicate or work properly
during incoming call
ID or, the service is not available
with this head unit
92
XDVD8285 OPERATION
Specifications
DVD Player
Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 24 Bit
FM Tuner
Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AM Tuner
Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
Monitor
Panel size: 6.5” (165.1 mm) diagonal measurement
View angle (up/down/left/right): 40/55/60/60
Resolution: 400 W x 234 H
Brightness (cd/m2): 350
Contrast ratio: 350:1
Elements: 280,800
General
Operating voltage: 11-16 VDC, negative ground
Speaker output impedance: 4~8 ohms
Line output voltage: 2 Volts
Line output impedance: 200 ohms
Chassis dimensions: 7" x 6.3" x 3.9"
(178 x 160 x 99 mm)
Faceplate dimensions: 6.6" x .7" x 3.8"
(167 x 18 x 97 mm)
Sleeve dimensions: 7.1" x 3.9" x 4.4"
(180 x 99 x 112 mm)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 17 Watts RMS x 5 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
93
XDVD8285 OPERATION
Notes
94
Dual Electronics Corp.
Toll Free: 1-866-382-5476
www.dualav.com
©2006 Dual Electronics Corp. All rights reserved.
NSA1106-V01
Printed in China
Download PDF

advertising