DIGITAL EQUIPMENT CORPORATION OCTOBER 1976 OEM Hardware and Software Product Summary L-------~DmDDmD---------I TABLEOFC(!JHTENTS INTRODUCTION 1 PDP-11!03 MICROCOMPUTERS 2 PDP-11V03 MICROCOMPUTERS 2 PDP-11/04 COMPUTERS 5 PDP-11105 COMPUTERS 7 PDP-11/34 COMPUTERS 9 PDP-11/F34 COlil!PYTERS 10 PDP-11/S34 COMPUTERS 10 PDP-11/T34 COMPUTERS 11 PDP-11/35 COMPUTERS 13 PDP-11/T35 COMPUTERS 15 PDP-11/45 COMPUTERS 17 PDP·11/55 COMPUTERS 19 PDP-11/T55 COMPUTERS 21 PDP-11/70 COMpUTERS 23 SOFTWARE PRODUCTS 45 DISK OPERATING SYSTEMS 46 MULTI-USER TIME·SHARED OPERATING SYSTEMS 48 MULTI-FUNCTION TIME-SHARED, REAL· TIME, AND BATCH OPERATING SYSTEMS 49 REAL-TIME MULTIPROGRAMMING SYSTEMS 50 COMMUNICATIONS AND NETWORK OPtION~S ' 55 DATA SERVICES OPTIONS 63 LANGUAGES OPTIONS 65 z o ~ a: ~ a: 8 INTRODUCTION DIGITAL manufactures a wide variety of standard products for the full range of OEM applications. DIGITAL products and services listed here are more fully described in technical brochures, product bulletins, and the series of PDP-11 handbooks. Information is given for the options under the following headings: Option Number All options should be referred to by the exact Option Number as shown in this product summary. This Option Number is recognized by our internal Order Processing System, and is used to expedite the handling of the many possible combinations. The first entry is the number for the option, with 115 Vac, 60 cycle power. If a different option number is used for 230 Vac, 50 cycle power, it is shown immediately below, in italics. All PDP-11/45 and PDP-11!70 systems require three phase power. Description The basic features and specifications of each option are given. Prerequisite Hardware or software needed as a prerequisite for the option is listed. The term "11/CPU" means any PDP-11 central processor unit. Mounting Code The mounting codes indicate how the option mounts in a system. = Cabinet mounted. CAB FS TT = PAN SM PAN SU SPC = Free standing unit. Table top unit. = Panel mounted. Front panel height is 10'12 inches (26.67 cm). = Small panel. Front panel height is 5'/4 inches (13.33cm). = System Unit. SU mounting assembly is included with the option. = Small Peripheral Controller. Option is a module that mounts in OF CPU MOD ( ) = = = = an SPC slot. (Quad sized controllers are assumed unless SPC (hex) is shown as the mounting code.) Option occupies 2 single DF11 slots in a DD11-B Peripheral Mounting Panel. Mounts in a dedicated CPU slot. Module. Option mounts in the same place as the equipment shown within the parentheses. Some options include 2 separate physical parts and are indicated by use of a plus (+) sign. Bus Load The number of loads the option puts on the UNIBUS. There can be a total of 20 bus loads before a DB11-A Bus Repeater is needed. For processors the figure represents bus loads available. For options the figure represents bus loads used. Amps @ +SV The +5V current required by the option is shown. Parentheses ( ) around the number indicate that the option supplies power. System Software The major operating systems that support the option, or have other software available to run the option. This is not a minimum supported system. CAPS-11 RT-11 RSX-11S RSX-11 M RSX-11D RSTS/E lAS DBMS RMS Cassette Programming System Real-Time Single User System Core-only Real-Time Operating System Small Real-Time Operating System Advanced Real-Time Operating System Resource Time-Sharing System (Extended) Interactive Application System Data Bas-ed Management System File Management System PDP-11/03 MICROCOMPUTERS • 11/03 Central Processor (KD11-F or KD11-J) • 16-Bit READ/WRITE MOS or Core Memory • Operator's Console • ASCII Console Emulator • Bootstrap Loader • Line Time Clock • Automatic Power Fail Detection/Restart Capability • Single-Level Automatic Priority Interrupt • Direct Memory Addressing • Basic Mounting Chassis and Power Supply 3 1/2" x 19" x 131/2" • OEM Basic Diagnostics • 30-Day Return-to-Factory Warranty Sub-UNIBUS Memory Option Number Sub-UNIBUS Slots Mtng Available Code Bus Loads Available Amps @+5V Available Total Chassis Maximum 11/03-EA 11/03-EB 4K (MOS) 28K (MOS Add-on) 6 (15) (16.2) RT-11 RSX-11S 11/03-FA 11/03-FB 4K (Core) 28K (MOS Add-on) 4 (14) (11.6) RT-11 RSX-11S (ital = 230v) System Software PDP-11/03 Options Option Number Description Prerequisite KEV11 Extended Instructions (EIS) and Floating Point (FIS) 11/03 Mtng Code Bus Loads I.C. (On KD11-F) Or KD11-J o Amps @ +5V System Software PDP-11V03 MICROCOMPUTERS • 11/03 Central Processor (KE11-F) • 16-Bit READ/WRITE MOS Memory (8K Words) • Dual Drive Floppy Disk (512K Bytes) • LA36 (EA, ED) or VT52 (AA, AD) Terminal • Operator's Consol e • ASCII Console Emulator • Bootstrap Loader • Line Time Clock • Automatic Power Fail Detection/Restart Capability • Single-Level Automatic Priority Interrupt • Direct Memory Addressing • Mounting Cabinet, Power Supplies, Cables • OEM Basic Diagnostics • 30-Day Return-to-Factory Warranty Memory Option Number Sub-UNIBUS Slots Mtng Available Code Bus Loads Available Amps @+5V Available System Software Total Chassis Maximum 11V03-AA 11V03-AD 8K (MOS) 16K (MOS Add-on) 2 25 1/2'" CAB (11 ) (11.5) RT-11 11V03-EA 11V03-ED 8K (MOS) 16K (MOS Add-on) 2 25 1/2'" CAB (11 ) (11.5) RT-11 (ita I = 230 v) 2 Option Number Description Prerequisite Mtng Code Bus Loads Amps @+5V System Software SUB-UNIBUS MEMORY OPTIONS MMV11-A 4K words of 16-bit Read/Write core memory. 1.15f-ts cycle time 11/03 two-11/03 slots 7.0 RT-11 RSX11-S MRV11-AA 512 word, expandable to 4K words, programmable Read-Only Memory (PROM) 11/03 one-11/03 slot 2.8 User programmable MRV11-AC 412 x 4 bit PROM chip, un-programmed MRV11-AA !.C. MSV11-B 4K words of 16-bit Read/Write MaS Memory 550ns access ti me 11/03 one-11/03 slot 0.6 RT-11 RSX11-S MSV11-CB 16K x 16-bit MaS Read/Write Memory. 390ns access time. 750ns cycle time. 11/03 two-11/03 slots 11/03 one-11/03 slot RT-11 RSX11-S SUB-UNIBUS COMMUNICATION OPTIONS DLV11 Asynchronous Serial Line Interface. 20 rnA and EIA (jumper selectable). 15 Baud Rates (jumper selectable) From 50-9600. Does NOT Provide Modem Control And Does NOT Include Cable. 1 1.0 RT-11 RSX-11S SUB-UNIBUS INTERFACE OPTIONS ADV11-A 12-bit, 16 channel single ended (8 channel differential), A/D Converter. Input ranges: ±5.12V, 0-10.24V. Sample and hold circuitry. 50 f-ts conversion time. 11/03 two-11/03 slots RT11 AAV11-A 12-bit, 4 channel (buffered), 0/ A converter. Output ranges: ±2.56V, ±5.12V, ±10.24V, 0-5.12V, 0-10.24V. 11/03 two-11/03 slots RT11 DRV11 General purpose 16-bit in/16-bit out interface module. Diode clamped inputs, latched driver outputs, TTL levels, cable connectors. Does NOT include cables. 11/03 one-11/03 slots DRV11-B General purpose 16-bit in/16-bit out DMA interface module. 250K words/sec transfer rate, (cyclesteal) 500K word/sec-burst. Does NOT include cables. 11/03 two-11/03 slots 1 DRV11-P Interface foundation module for custom interfaces. Includes SubUNIBUS interface and wirewrappable area for customer interfacing. 11/03 two-11/03 slots 1 KWV11-A Programmable Crystal Clock with frequencies from 100 Hz to 1 MHz plus 60 cycle and external input. 11/03 two-11/03 slots 3 0.9 RT11 Option Number (ita I 230v) = Description Prerequisite System Software Mtng Code Bus Load Amps 1 1.5 (interface) RT-11 RSX-11S 1.5 (interface) RT-11 RSX-11S (i nterface) RT-11 RSX-11S @+SV SUB-UNIBUS MASS STORAGE OPTIONS RXV11-AA RXV11-AD 128K Word (single-drive) Flexible Disk System. 24jLs/byte transfer rate, 488 ms average access time 11/03 PAN and one-11/03 slot RXV11-BA RXV11-BD 256K Word (dual-drive) Flexible Disk System. 24jLs/byte transfer rate, 488 ms average access time 11/03 PAN and one-11/03 slot SUB-UNIBUS LINE PRINTERS LAV11-PA LAV11-PD 180 CPS Parallel Printer. 3" to 132 Column width, 96 Character ASCII set 11/03 FS and one-11/03 slot LA180-CA LA 180-CD Same LAV11 except serial I/O revision 20 ms interface 11/CPU and DLV11 FS and one-11/03 slot ALL LA180-EA LA180-ED Same as LA180-C except EIA interface 11/CPU and DLV11 FS and one-11/03 slot ALL 11/03 31/2'" PAN 1 SUB-UNIBUS EXPANSION OPTIONS BA11-ME BA11-MF 11/03 Expander box Includes power supply (18A @ +5v, 2.5A @ +12) and H9270 Backplane. Does NOT include expansion cables. BC03L-05 Local Serial I/O Cable, EIA for 11/03 BC05C-25 Serial I/O Cable, EIA for 11/03 BC05M-04 Serial I/O Cable, 20 rnA for 11/03 BC07D-10 Parallel I/O Cable, 10 foot, for 11/03 BCO'7D-15 Parallel I/O Cable, 15 foot, for 11/03 BC07D-25 Parallel I/O Cable, 25 foot, for 11/03 BC08R-01 Parallel I/O Maintenance Cable for 11/03 BCV1B-04 Lt.-foot Sub-UNIBUS EXPANSION cable assembly. Required for connecting 11/03 to first expander box (BA11-ME, MF). 11/03 one-11/03 slot BCV1B-06 Same as -04 except 6-feet long. 11/03 one-11/03 slot BCV1A-10 10-foot Sub-UNIBUS EXPANSION cable assembly. Required for connecting first expander box to second expander box. 5'//' x 19.1/ Expander Box includes H0341. Space for DDV-11-B. Does NOT include Power supply. BA11-ME BA11-MF one-11/03 slot H909-C H984-BA H984-BD REV11-A REV11-C TEV11 25 1/l' Cabinet (11V03 style) space for 2-3 1/l' boxes + 1 - 10 112 PAN. Includes power controls Does NOT include Fans. Floppy Disk Boot, MOS Memory refresh system diagnostics. BOS terminator Same as above, w/o bus terminator. For use in systems with DMA devices Sub-UNIBUS TERMINATOR Required if expanding beyond 11/03 basic box. NOT required if an REV11-A is included in configuration. 0 18.0 SM PAN 25 1/2" CAB 11/03 one-11/03 slot 1.6 RT-11 RSX11-S 11/03 one-11/03 slot 1.6 RT-11 RSX11-S BA11-ME BA11-MF one-11/03 slot 4 1 0.5 PDP-11/04 COMPUTERS • 11/04 Central Processor (KD11-D) • 16-Bit Read/Write MaS Memory • Operators Console • ASCII Console Emulator • Bootstrap Loader • Automatic ROM Diagnostic • Automatic Power Fail Detection/Restart Capability • 4-Level Automatic Priority Interrupt • Direct Memory Addressing • Basic Mounting Chassis and Power Supply • OEM Basic Diagnostics 51/l' (13.3cm) High Mounting Box (5 1/ / ' x 19" x 25" or 13.3cm x 48.3 cm x 63.5cm) With MaS Memory Option Number (ital = 230v) Memory Total Included Chassis Maximum Sub-UNIBUS SPC Slots Slots Available Available Amps Mtng Code Bus Load @+5V System Available Software 11/04-BC 11/04-80 8K (MaS) 28K 0 7 SM PAN (16) (16) CAPS-11 RT-11 RSX-11 S RSX-11M 11/04-DC 11/04-00 16K (MaS) 28K 0 7 SM PAN (16) (15) RT-11 RSX-11S RSX-11 M 11/04-LC 11/04-LO 28K (MaS) 28K 0 6 SM PAN (15) (13) RT-11 RSX-11S RSX-11 M 51/4" (13.3cm) High Mounting Box (5 1/ / ' x 19" x 25" or 13.3cm x 48.3cm x 63.5cm) With Core Memory Option Number (ita! 230v) = Memory Total Included Amps Chassis Maximum Sub-UNIBUS SPC Slots Slots Available Available Mtng Code Bus Load System @+5V Available Software 11/04-FC 11/04-FO 8K (CORE) 28K 0 6 SM PAN (16) (12) RT-11 RSX-11S RSX-11M 11/04-HC 11/04-HO 16K (CORE) 28K 0 6 SM PAN (16) (12) RT-11 RSX-11S RSX-11 M 11/04-MC 11/04-MO 28K (CORE) 28K 0 4 SM PAN (15) (8) RT-11 RSX-11S RSX-11M 101/2" (26.6cm) High Mounting Box (101/l' x 19" x 25" or 26.6cm x 48.3cm x 63.5cm) With MaS Memory Memory Total Included Chassis Maximum Sub-UNIBUS SPC Slots Slots Available Available 11/04-DH 11/04-0J 16K (MaS) 28K 3 11/04-LH 11/04-LJ 28K (MaS) 28K 3 Option Number (ita! 230v) = Amps Mtng Code Bus Load @+5V System Available Software 7 PAN (16) (40) RT-11 RSX-11S RSX-11 M 6 PAN (15) (38) RT-11 RSX-11S RSX-11M 5 101/2" (26.6cm) High Mounting Box (10'12" x 19" x 25" or 26.6cm x 48.3cm x 63.5cm) With Core Memory Option Number (ital = 230v) Memory Total Included Chassis Maximum 11/04-HH 16K (CORE) 28K 3 28K (CORE) 28K 3 Mtng Code Bus Load Amps @+SV System Available Software 6 PAN (16) (37) RT-11 RSX-11S RSX-11M 4 PAN (15) (33) RT-11 RSX-11S RSX-11M Sub-UNIBUS SPC Slots Slots Available Available 11/04-HS 11/04-MH 11/04-MJ PDP-11/04 OPTIONS Option Number (ital = 230v) Description Prerequisite Mtng Code H775-AA Battery Back-Up 11/04 external Programmer Console 11/04 SPC Bus Loads Amps @ +SV Available H77S-AB KY11-LB 6 1 (3) System Software PDP-11/05 COMPUTERS • 11/0S Central Processor (KD11-B) • 16-Bit Read/Write Core Memory • Programmer Console • Asynchronous Serial Interface for Console Terminal • Line Frequency Clock (KW11-L) • Automatic Power Fail Detection/Restart Capability • 4-Level Automatic Priority Interrupt • Direct Memory Addressing • Rack Mountable Slides • Basic Mounting Chassis and Power Supply • OEM Basic Diagnostics (QJ11S-AB) • System Schematics 5'/4" (13.3cm) High Mounting Box (19" (4B.3cm) wide, 20" (50.Bcm) deep) Memory Total Included Chassis Maximum 11/05-KA 11/05-KB 4K 11/05-LA 11/05-LB BK Option Number (ita! 230v) = Sub-UNIBUS Slots Available Amps SPC Slots Available Mtng Code Bus Load @+5V 4K 4 SM PAN (1B) (6) CAPS-11 RT-11 RSX-11S RSX-11M BK 4 SM PAN (1B) (6) CAPS-11 RT-11 RSX-11A RSX-11 M Mtng Code Bus Load @+5V PAN (1B) (1S) Available System Software 10'/2" (26.6cm) High Mounting Box (19" (4B.3cm) wide, 23" (SB.4cm) deep) Option Number (ita! 230v) = 11/05-NC 11/05-NO Memory Total Included Chassis Maximum Sub-UNIBUS Slots Available BK 2BK 3 SPC Slots Available Amps Available System Software CAPS-11 RT-11 RSX-11S RSX-11 M 10'/2" (26.6cm) High Mounting Box (19" (4B.3cm) wide, 2S" (63.5cm) deep) Option Number (ita! 230v) = 11/05-SC 11/05-S0 Amps Memory Total Included Chassis Maximum Sub-UNIBUS Slots Available SPC Slots Available Mtng Code Bus Load Available 16K 2BK 3 3 PAN (1B) (2S) 7 @+5V System Software CAPS-11 RT-11 RSX-11S RSX-11 M PDP-11/05 OPTIONS Amps Bus Loads @+SV Option Number Description Prerequisite Mtng Code KE11-A Extended Arithmetic Element (EAE). Provides signed integer multiply and divide, multiple shifts, and normalization. 11/05 SU 1 4.0 RT-11 RSX-11S RSX-11M KE11-B Hex-mounted Extended Arithmetic Element (EAE). Provides signed integer multiply and divide, multiple shifts, and normalization. 11/04, 11/05 SPC (hex) 2 4.0 RT-11 RSX-11S RSX-11M PDP-11/05 DOCUMENTATION DEC-11H5SPK-A-D PDP-11/05 Hardware Manual Set 8 Available System Software PDP-11/34 COMPUTERS • • • • • • • • • • • • • • 11/34 Central Processor 16 Bit Read/Write Parity MaS or Core Memory Operators Console ASCII Console Emulator Bootstrap Loader Automatic ROM Diagnostic Automatic Power Fail Detection/Restart Memory Management Extended Instruction Set (EIS) Direct Memory Access (DMA) Expandable to 124K words 4-Level Automatic Priority Interrupt 8-lnternal general purpose Registers Basic Mounting Chassis and Power Supply 51/ / ' x 19" x 25''' (13.3 cm x 48.3 cm x 63.5 cm) 101/l' x 19" x 25" (26.7 cm x 48.3 cm x 63.5 cm) • OEM Basic Diagnostics • 30 day Return to factory Warranty Option Number (ita I 230v) Total Included Chassis Maximum HQ Sub-UNIBUS SPC Slots Slots Available Available 11/34-DC 11/34-DD 16K(M)* 64K 0 11/34-DH 11134-DJ 16K(M) 124K 11/34-DM 11134-DN 16K(M) 11/34-HC 11/34-HD Bus Loads Used Amps Mtng Code 3/3 SM PAN 4 10 RT-11 RSX-11S RSX-11M RSTS/E 3 3/3 PAN 4 34 RT-11 RSX-11S RSX-11M RSTS/E 124K 3 3/2 PAN 5 32 RT-11 RSX-11S RSX-11M RSTS/E 16K(C)* 32K 0 3/2 SM PAN 4 7 RT-11 RSX-11S RSX-11M RSTS/E 11/34-HH 11/34-HJ 16K(C) 64K 3 3/2 PAN 4 32 RT-11 RSX-11S RSX-11M RSTS/E 11/34-HM 11/34-HN 16K(C) 64K 3 2/2 PAN 5 30 RT-11 RSX-11S RSX-11M RSTS/E 11/34-LC 11/34-LD 32K(M) 64K 0 3/2 SM PAN 5 8 RT-11 RSX-11S RSX-11M RSTS/E 11/34-LH 11/34-LJ 32K(M) 124K 3 3/2 PAN 5 32 RT-11 RSX-11S RSX-11 M RSTS/E Memory = * M-MOS C-CORE 9 @+5V Available System Software Option Number (itaf = 230v) Memory Total Included Chassis Maximum Sub-UNIBUS SPC Slots Slots Available Available 11/34-LM 32K(M) 124K 3 32K(C) 32K 32K(C) 32K(C) Amps Mtng Code Bus Loads Used @+SV 2/2 PAN 6 30 RT-11 RSX-11S RSX-11M RSTS/E 0 30 SM PAN 5 3 RT-11 RSX-11S RSX-11M RSTS/E 64K 3 30 PAN 5 28 RT-11 RSX-11S RSX-11M RSTS/E 64K 3 20 PAN 6 26 RT-11 RSX-11S RSX-11M RSTS/E Bus Loads Used Amps Available 11/34-LN 11/34-MC 11/34-MD 11/34-MH 11/34-MJ 11/34-MN 11/34-MN System Software PDP-11F34 COMPUTERS • PDP 11/34 Central Processor (10 112 in.) 26.7cm. chassis • 16K words of parity MaS or CORE memory • Bootstrap (M9301) • Clock (DL 11W) • LA36 Terminal and Control • Dual-Drive RX11-B Subsystem • H960CA Cabinet Option Number (itaf = 230v) Memory Total Included Chassis Maximum Sub-UNIBUS SPC Slots Slots Available Available 11 F34 AA 16K(M) 124K 3 3/1 PAN CAB 7 7.3 RT-11 RSX-11S 16K(C) 64K 3 2/1 PAN CAB 7 5.3 RT-11 RSX-11S 11F34 AB 11F34 AD 11 F34 BA 11F34 BB 11F34 BD Mtng Code PDP-11S34 COMPUTERS -PDP 11/34 Lm (or mm) Central Processor with • 26.7 cm (10 1/l') chassis • 32K words of MaS or CORE parity memory • Serial line interface (DL 11W) • Memory Management • Extended Instruction Set • Auto Load Bootstrap (M9301) • Clock (DL 11W) -Controller for up to 8 RK06 drives (RK611) -Dual RK06 Drives in separate pedestal cabinets -LA36 DECwriter and control -System cabinet (H960-CA) 10 @+SV Available System Software Memory Total Included Chassis Maximum Sub-UNIBUS SPC Slots Slots Available Available 11S34 AA 11S34 AB 32K(M) 64K 1 4/3 11S34 BA 32K(C) 32K 1 2/3 Option Number (ital 230v) = Bus Loads Used Amps @+5V Available PAN CAB 2 FS 7 15 RT-11 RSX-11M, S RSTS/E PAN CAB 2 FS 7 11 RT-11 RSX-11 M, S RSTS/E Bus Loads Used Amps @+5V Available Mtng Code System Software PDP-11T34 COMPUTERS • PDP 11/34 Central Processor, 26.7 cm (10 112 in.) Chassis • 32K words of parity MaS or CORE memory • Bootstrap (M9301) • Line Frequency Clock (DL 11W) • LA36 Terminal and serial line control (DL 11W) • Dual Drive RK11/RK05J Subsystem • H960C Cabinet Option Number (ita I 230v) Total Included Chassis Maximum HQ Sub-UNIBUS SPC Slots Slots Available Available 11T34-AA 11T34-AB 32K(M) 124K 2 2/2 PAN CAB 7 21 RT-11 RSX-11S RSX-11M RSTS/E 11T34-AC 11T34-AO 32K(M) 124K 2 2/2 PAN CAB 7 21 RT-11 RSX-11S RSX-11 M RSTS/E 11T34-BA 11T34-BB 32K(C) 64K 2 2Q PAN CAB 7 19 RT-11 RSX-11S RSX-11M RSTS/E 11T34-BC 11T34-BO 32K(C) 64K 2 2Q PAN CAB 7 19 RT-11 RSX-11S RSX-11 M RSTS/E 11T34-CA 11T34-CB 32K(M) 124K 2 2/2 PAN CAB 7 21 RT-11 RSX-11S RSX-11 M RSTS/E 11T34-DA 11T34-0B 32K(M) 124K 2 2/2 PAN CAB 7 21 RT-11 MU BASIC 11T34-EA 11T34-EB 32K(M) 124K 2 2/2 PAN CAB 7 21 RSX-11 11T34-FA 11T34-FB 32K(M) 124K 2 2/2 PAN CAB 7 21 RSTS/E 11T34-HA 11T34-HB 32K(C) 64K 2 2Q PAN CAB 7 19 RT-11 11T34-JA 11T34-JB 32K(C) 64K 2 2Q PAN CAB 7 19 RT-11 MU BASIC 11T34-KA 11T34-KB 32K(C) 64K 2 2 Q PAN CAB 7 19 RSX-11 M Memory = 11 Mtng Code System Software HQ Memory Option Number (ital =230 v) 11T34-LA 11T34-LB Total Included Chassis Maximum Sub-UNIBUS SPC Slots Slots Available Available 32K(C) 64K 2 2Q Mtng Code PAN CAB Bus Loads Used Amps @ +SV Available System Software 7 19 RSTS/E Note: PDP-11/T34 maud P series includes 1-RKOSJ and 1-RKOSF instead of 2-RKOSJ's 11T34-MA 11T34-MB 32K(M) 124K 2 2/2 PAN CAB 8 21 RT11 RSX11S, M RSTS/E 11T34-PA 11T34-PB 32K(C) 64K 2 2Q PAN CAB 8 19 RT11 RSX11S, M RSTS/E Option Number Description Prerequisite Mtng Code Bus Loads Amps @+SV MS11-JP 16K word parity MaS memory, 700Nsec access time 11/04 11/34 1 HEX SPC 1 2 MM11-DP 16K word parity CORE memory, 575Nsec access time 11/34 2HEX SPC 1 4 M7850 Parity control for each DD11-C, D with MS11-JP or MMLL-DP MS11-JP 11/04 or MM11-DP 11/34 DOUBLE HEIGHT 1 1 M9301-YA Oper. Boot, ASCII console, Diagnostic 11/04 11/34 DOUBLE HEIGHT 2 M9301-YB ASCII Boot and Console Diagnostic 11/04 11/34 DOUBLE HEIGHT 2 DL11-W Serial line controller and line frequency clock 11/04 11/34 1 QUAD SPC 3 KY11-LB Programmers octal keypad console 11/04 11/34 1 QUAD SPC H775-A MaS battery backup 5'//' chassis only 11/04-11/34 MS11-JP SMALL PAN FP11-AU Floating point processor with 32 bit and 64 bit accuracy, instruction set compatible with 11/45 and 11/70 11/34 1 HEX SPC DD11-C Backpanel providing 2 HEX and 2 QUAD SPC slots 11/34 1 SU DD11-D Backpanel providing 7 HEX and 2 QUAD SPC slots 11/34 2SU FP11-AU Floating Point Processor, 32 and 64-bit Single & Double precision 11/34 HEX DD11-C Backpanel supplying 2 HEX and 2 QUAD SPC slots 11/04 11/34 SU DD11-D Backpanel supplying 7 HEX and 2 QUAD SPC slots 11/04 11/34 2SU MM11-CP 8K word, parity, CORE memory, 575 Nsec access time 11/04 1 HEX SPC MS11-FP 8K word, parity, MaS memory, 700 Nsec cycle time 11/04 1 HEX SPC 12 1 3 7 7a 3 1 1.3 System Software PDP-11/35 COMPUTERS • 11/35 Central Processor (KD11-A) • 16-bit Read/Write Core Memory • Programmer Console • Automatic Power Fail Detection/Restart Capability • 4-Level Automatic Priority Interrupt • Rack Mountable Box with Slides and Power Supply or Standard Cabinet and Power Supply • Pre-wired Module Slots for the following options: Line Frequency Clock (KW11-L) Extended Instruction Set (EIS) Unit including Signed Integer, Multiply and Divide (KE11-E) Floating Point (FIS) Unit (KE11-F) Memory Management Unit (KT11-D) Stack Limit Unit (KJ11-A) Maintenance Option (KM11-A) • OEM Basic Diagnostics (QJ116-AB) • System Schematics Memory Option Number (ital = 230 v) 11/35-SE 11/35-SF Total Included Chassis Maximum 16K Parity 40K Sub-UNIBUS Slots Available SPC Slots Available Amps @ +5V Mtng Code Bus Load Available PAN (17) (24.8) System Software RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D RSTS/E *11/35-JE (JF) consists of a CPU mounting box (PAN) and a memory mounting box (SM PAN). Standard Cabinet (H960-C) Mounted Memory Option Number (ita I = 230v) 11/35-FC 11/35-FD Amps +5V Available Total Included Chassis Maximum Sub-UNIBUS Slots Available SPC Slots Available Mtng Code Bus Load @ System Software 28K Parity 64K 5 1 CAB (16) (43.0) RT -11 DOS/BATCH RSX-11A RSX-11M RSX-11D RSTS/E PDP-11/35 OPTIONS Bus Load Amps +5V System Available Software Option Number Description Prerequisite Mtng Code KE11-E Extended Instruction Set (EIS) option. Provides extended manipulation of fixed point numbers, signed integer multiply and divide, and long shifts. 11/35 (11/35) RT-11 DOS/BATCH RSX-11A RSX-11 M RSX-11D RSTS/E KE11-F Floating Point (FIS) option. Enables faster calculations, floating point add, subtract, multiply and divide. KE11-E (11/35) RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D RSTS/E 13 @ System Software Description Prerequisite Mtng Code KJ11-A Stack Limit option. Permits a soft stack limit violation. 11/35 (11/35) RSX-11M RSX-11D RSTS/E KT11-D Memory Management option. Permits access to 124K words of memory and provides protection and relocation. Includes KJ11-A. 11/35 (11/35) RSX-11M RSX-11D RSTS/E 14 Bus Load Amps Option Number @+5V PDP-11T35 SYSTEM • 11/35 Control Processor (KD11-A) • 32K Word Parity Memory • Programmer Console • Automatic Power Fail Detection/Restart Capability • Four-level Automatic Priority Interrupt • Line Frequency Clock (KW11-L) • DECwriter II Console Terminal (LA36-CE) • Memory Management Unit (KT11-D) • Terminal Control (DL11-A) • Dual Cartridge Disk and Control (RK11 J-D) • Two Cartridge Disks (RK05-J) • Bootstrap Loader (BM873-4A) 32K WORD MEMORY SYSTEMS Amps Option Number (ital = 230v) 11T35-AA 11T35-AB Memory 32K Parity Chassis Maximum Sub-UNIBUS Slots SPC Slots Mtng Code Bus Load @+5V 64K 3 3 2 CAB (12) 40 15 Available System Software RT-4 DOS/BATCH RSX-11 M RSX-11D RSTS/E PDP-11/45 COMPUTERS • 11/45 Central Processor (KB11-A or -D) • 32K Parity Core Memory-16-Bit Read/Write • Programmer Console • Automatic Power Fail Detection/Restart Capability • 4-Level Automatic Priority Interrupt • Hardware Multiply, Divide, and Extended Instruction Set • DECwriter II Console Terminal (LA36-CE) • Term i nal Control (0 L11-A) • Standard Cabinet and Power Supply • Pre-wired Module Slots for the Floating Point Processor (FP11-B or -C)* • Line Frequency Clock (KW11-L) Memory Management Unit (KT11-C or -D) • Up to 32K Words MOS Memory • OEM Basic Diagnostics • System Schematics 32K WORD MEMORY SYSTEMS Option Number (ita/ = 230v) 11/45-BW 11/45-BY 11/45-DW 11/45-DY Memory Total Included Bus Load Amps @ +SV Available CAB (17) (14.9) RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D lAS CAB (16) (14.9) RT-11 DOS/BATCH RSX-11A RSX-11 M RSX-11D RSTS/E lAS Chassis Maximum Sub-UNIBUS Slots Available SPC Slots Available Mtng Code 32K Parity Core 32K 1 1 32K Parity Core 32K 1 1 *FP11-B Floating Point Processor is available with the-11/4S-BW, BY only. FP11-C Floating Point Processor is available with the-11/45-DW, DY only. 17 System Software PDP-11/55 COMPUTERS • 11/55 Central Processor (KB11-D) • 16K or 32K Semiconductor or Core Memory-16-Bit Read/Write • Programmer Console • Automatic Power Fail Detection/Restart Capability • 4-Level Automatic Priority Interrupt • Hardware Multiply, Divide, and Extended Instruction Set • DECwriter II Console Terminal (LA36-CE) • Terminal Control (DL 11-A) • Standard Cabinet and Power Supply • Pre-wired Module Slots for FP11-C Floating Point Processor • Bootstrap (BM873-YB) • Line Frequency Clock (KW11-L) Memory Management Unit (KT11-CD) • Up to 32K Words of Bipolar Memory in 4K increments • OEM Basic Diagnostics • System Schematics 16K WORD MEMORY SYSTEMS Option Number (ital = 230v) Memory Total Included Chassis Maximum Sub-UNIBUS Slots Available SPC Slots Available Mtng Code Bus Load @ Amps +5V Available System Software 11/55-BA 11/55-88 32K Parity Bipolar 32K 3 2 CAB (15) (11.5) RT-11 RSX-11 M RSX-11 D lAS FORTRAN IV PLUS 11/55-BC 11/55-8D 16K Parity Core and 16K Parity Bipolar 32K 1 2 CAB (12) (11.5) RT-11 RSX-11 M RSX-11 D RSTS/E lAS FORTRAN IV PLUS 19 PDP-11T55 SYSTEM • 11/55 Central Processor (KB11-D) • 32K Word Memory • Programmer Console • Automatic Power Fail Detection/Restart Capability • 4-Level Automatic Priority Interrupt • Hardware Multiply, Divide, and Extended Instruction Set • DECwriter II Console Terminal (LA36-CE) • Terminal Control (DL 11-A) • Standard Cabinet and Power Supply • FP11-C Floating Point Processor • Memory Management Unit (KT11-CD) • Up to 32K Words of Bipolar Memory in 16K Increments • OEM Basic Diagnostics • System Schematics • Dual Cartridge Disk and Control (RK11 J-D) • Two Cartridge Disks (RK05-J) 16K WORD MEMORY SYSTEMS Memory Option Number (itaJ = 230v) Total Included Chassis Maximum Sub-UNIBUS Slots Available SPC Slots Available Amps Mtng Code @+Sv Bus Load Availiable System Software 11T55-BA 11T55-88 32K Parity Bipolar 64K 2 2 2 CAB (13) (7.5) RT-11 11T55-BC 11T55-80 16K Parity Bipolar and 16K Parity Core 64K 0 2 2 CAB (11 ) (7.5) RSX-11M RSX-11D lAS FORTRAN IV PLUS RSTS/E FLOATING POINT OPTIONS Mtng Code Bus Load Amps System Software Option Number Description Prerequisite FP11-B Floating Point Processor. Performs hardware operations on 32-bit and 64-bit floating point numbers as well as integer to floating conversions. 11/45 or 11170 (11/45 or 11170') RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D RSTS/E lAS FP11-C Floating Point Processor. Performs hardware operations on 32-bit and 64-bit floating point numbers as well as integer to floating conversions. 11/55 or 11170 (11/55 or 11170) RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D RSTS/E lAS 21 @ +SV PDP-11/70 COMPUTERS • 11/70 Central Processor (KB11-B) with Hardware Memory Management • 1K Word (2K byte*) Parity Bipolar Cache Memory • 64K Word (12BK byte*) Parity Core Memory (MJ11-AA, -AB plus MJ11-AE, -AF) • Bootstrap/Diagnostic Loader (M9301-YC) • Line Frequency Clock (KW11-L) • DECwriter II Console Terminal (LA36-CE) • Terminal Control (DL 11-A) • 2 Cabinets (1 for the Central Processor and 1 for Core Memory) • Pre-Wired Module Slots for the following options: Floating Point Processor (FP11-C) 4 High-Performance Mass Storage Control Units for RW P04, RWS03, RWS04, TWU16 • OEM Basic Diagnostics • System Schematics BASIC PROCESSOR OPTIONS Option Number Mtng Code Bus Load Amps System @+SV Software Description Prerequisite KW11-L Line Frequency Real-Time Clock. Divides time into intervals of 16% msec (20 msec at 50 Hz line frequency). Mounts in a dedicated CPU slot. 11/35 or 11/45 (CPU) O.B RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11 D RSTS/E lAS KW11-P Programmable Real-Time Clock. Program selectable inputs of 100 kHz, 10kHz, line frequency or external signal. 11/CPU SPC 1.0 DOS/BATCH RSX-11M RSX-11D RSTS/E 3.4 (all) RSX-11M RSX-11D RSTS/E lAS CLOCKS MEMORY MF11-L BK word core memory and control with expansion capability to 24K (by addition of MM11-Ls or MM11-LKs). 900 nsec cycle time. Not compatible with BA11-ES box. 11/CPU (not 11/70) 2SU MF11-LP BK word parity core memory and control with expansion capability to 24K (by addition of MM11-LPs). 900 nsec cycle time. Not compatible with BA11-ES box. 11/CPU (not 11/70) 2SU 2 4.B 32K word core memory and control. 11/35 or 11/45 2SU 2 11.5 MF11-UB 9BO nsec cycle time. Not compatible with BA11-ES box. 23 CAPS-11 RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D lAS Option Number Description (itaf 230v) = Prerequisite Mtng Code Bus Load Amps System @+5V Software MF11-UC 64K word core memory and control. 980 nsec cycle time. Not compatible with BA11-ES box. 11/35 or 1'1/45 4SU 4 23.0 MF11-UP 16K word parity core memory and control with expansion capability to 32K (by addition of MM11-UP). 980 nsec cycle time. Not compatible with BA11-ES box. 11/CPU (not 11170) 2SU 2 7.3 RSX-11 M RSX-11D RSTS/E lAS MF11-UR 32K word parity core memory and control. 980 nsec cycle time. Not compatible with BA11-ES box. 11/35 or 11/45 2SU 3 12.7 RSX-11M RSX-11D RSTS/E lAS MF11-US 64K word parity core memory and control. 980 nsec cycle time. Not compatible with MA11-ES box. 11/35 or 11/45 4SU 6 25.4 RSX-11M RSX-11D RSTS/E lAS MJ11-AA MJ11-AB 32K word parity core memory unit with expansion capability to 128K words (by addition of MJ11-AEs). 1 usec cycle ti me. 11170 (11170) or (MJ11-AC, -AD) RSX-11D RSTS/E lAS MJ11-AC MJ11-AD 128K word parity core memory system. Includes cabinet, power supplies and control. Expansion capabHity to 512K words (by addition of up to three MJ11-AGs (AHs) or MJ11-AAs (ABs)). 1 usec cycle time. 11170 CAB RSX-11D RSTS/E lAS MJ11-AE 32K words parity expander core memory. Mounts in MJ11-AA, -AB. 1 usec time. 11/70 or MJ11-AA, -AB (11170) or (MJ11-AA, -AB) RSX-11D RSTS/E lAS MJ11-AG MJ11-AH 128K word parity core memory expansion frame. Includes power supplies and control. 1 usec cycle ti me. 11170 or MJ11-AC, -AD (MJ11-AC, -AD) RSX-11D RSTS/E lAS MJ11-BA MJ11-BB 64K word parity core memory unit with expansion capability to 256K words (by addition of MJ11-BE) 1.2Msec cycle time. 11/70 MJ11-BC MJ11-BD MJ11-BG MJ11-BH RSX-11D RSTS/E lAS MJ11-BC MJ11-BD 256K word parity core memory system. Includes cabinet, power supplies and control. Expansion capacity to 1025K words (by addition of up to three MJ11-BA's (BB's) 1.2Msec cycle time. 11/70 CAB MJ11-BG MJ11-BH 256 word parity core memory unit. 1.2Msec cycle time. 11/70 MJ11-BC MJ11-BD MJ11-BG MJ11-BH MJ11-BE 64K word parity core memory. Mounts in MJ11-AA-AB. 1.2Msec cycle time. 11/70V MJ11-BA MJ11-BB MJ11-BC MJ11-BD MJ11-BG MJ11-BH 24 CAPS-11 RT-11 DOS-BATCH RSX-11A RSX-11M RSX-11D lAS Option Number (ital = 230v) Description Prerequisite Mtng Code Bus Load Amps MM11-CP 8K word parity core memory 11/04 or 11/34 1 HEX SPC PLUS 1 QUAD SPC MM11-DP 16K word core memory. 11/34 or 11/04 2 HEX SPC 4 MM11-UP 16K word parity expander core memory. Mounts in MF11-UP. 980 nsec cycle time. MF11-UP (MF11-UP) 5.4 MMV11-A 4K x 16 word core memory. MRV11-AA 4K x 16 word core memory. @+SV System Software 3 RSX-11M RSX-11D RSTS/E lAS MEMORY CONVERSION KIT FM11-U 16K sense memory conversion kit. SEMICONDUCTOR MEMORY MS11-AP 4K word bipolar memory. 300 nsec cycle time. MS11-CC (11/55) MS11-CC Bipolar Memory Control. Controls up to four MS11-AP memories. 11/45 (11/55) 1 MS11-FP 8K word parity MOS memory. 11/04 or 11/34 1 HEX SPC 1 MS11-JP 16K word parity MOS memory. 11/04 or 11/34 2 HEX SP.C MS11-BC First MOS Memory Control. Controls up to four MS11-BR or MS11-BT memories. 11/45 (11/45) (all) MS11-BD Second MOS Memory Control. Controis up to four additional MS11-BR or MS11-BT memories. MS11-BC (11/45) (all) MS11-BR 4K word MOS memory. 495 nsec cycle time. MS11-BC (11/45) CAPS-11 RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D lAS MS11-BT 4K word MOS memory with byte parity. 495 nsec cycle time. MS11-BC (11/45) RSX-11M RSX-11D RSTS/E lAS Note: CAPS-11 RT-11 DOS/BATCH RSX-11A RSX-11M RSX-11D lAS (all) 2 4 There can be a maximum of 2 semiconductor memory controls per system. 32K bipolar, or 32K MOS, or 16K bipolar the maximum semiconductor memory in a system. + READ ONLY MEMORY/BOOTSTRAP LOADERS BM792-YC Card reader bootstrap loader (CR11). 11/05, 11/35, SPC or 11/45 1 0.3 BM873-YA Restart loader contains ROM with bootstrap program for paper tape, disk (RK11, RP11), magnetic tape (TU10), DECtape, and DECassette. 11/05, 11/35, SPC or 11/45 1 1.0 25 (all) 16K MOS is Option Number (ita I 230v) = Description Prerequisite Mtng Code Bus Load Amps @+SV BM873-YB Restart Loader. Contains ROM with bootstrap program for paper tape, disks, (RK11, RP11, RJS03, RJS04, and RJP04), magnetic tape (TU10 and TU16). DECtape and DECcassette. 11/05, 11/35, SPC or 11/45 1 1.0 BM873-YC Restart loader. Contains ROM with bootstrap program for paper tape, disk (RK11, RP11), magnetic tape (TU10) DECtape, DECassette, and DVII (sync. line interface). 11/CPU 1 1.0 H324 Switch panel for use with BM873-YA or BM873-YB. 11/05, 11/35, SM PAN or 11/45 M792 Customer programmed bootstrap. 32-word read-only diode memory; customer programmable by the removal of selected diodes. 11/CPU REV11-A REV11-C Use memory insert. SPC System Software (all) (all) 1 SPC 0.3 MASS STORAGE Option Number (ital 230v) Mtng Code Bus Load 11/CPU CAB +2SU 1 512K word fixed head disk drive and control unit. Expandable to a total of 8 drives (RS03 or RS04). 4 usec/word transfer rate, 8.5 msec average access time. (4.8 usec/word transfer rate, 10.2 msec average access time at 50 Hz.) Included cabinet has space for 2 additional disk drives. 11/34 11/35 or 11/45 CAB +2SU RWS03-BA RWS03-BD 256K word fixed head disk drive and control unit. Expandable to a total of 8 drives (RS03 or RS04). 4 usec/word transfer time, 8.5 msec average access time. (4.8 usec/word transfer rate, 10.2 msec average access time at 50 Hz.) Included cabinet has space for 2 additional disk drives. 11/70 (11/70) + CAB 1 RSX-11D RSTS/E lAS RWS04-BA RWS04-BD 512K word fixed head disk drive and control unit. Expandable to a total of 8 drives (RS03 or RS04). 2 usec! word transfer time, 8.5 msec average access ti me. (2.4 usec/word transfer rate, 10.2 msec average access time at 50 Hz.) Included cabinet has space for 2 additional disk drives. 11/70 (11/70) + CAB 1 RSX-11D RSTS/E lAS = Description Prerequisite RJS03-BA RJS03-BD 256K word fixed head disk drive and control unit. Expandable to a total of 8 drives (RS03 or RS04). 4 or 8 usec/ word transfer rate, 8.5 msec average access time. (4.8 or 9.6 usec/word transfer rate, 10.2 msec average access time at 50 Hz.) Included cabinet has space for 2 additional disk drives. RJS04-BA RJS04-BD 26 Amps System @+SV Software RSX-11M RSX-11D RSTS/E lAS RSX-11M RSX-11D RSTS/E lAS Option Number Mtng Code Bus Load Amps 11/CPU PAN +SU 1 7.S (same as above) (SO Hz.) 11/CPU PAN 1 7.S RK11J-DE RK11J-OJ 1.2 million word disk cartridge drive and control unit. Expandable to a total of 8 RKOS DECpack disk drives. 11 usec/word transfer rate, 70 msec average access time. Included cabinet has space for 3 additional RKOS's. 11/CPU CAB +SU 1 7.S RP11-CE RP11-CJ 20 million word disk pack drive and control unit. Expandable to a total of 8 RP03 disk pack drives. 7.S usec/ word transfer rate, 42 msec average access time. (Drive requires 230 Vac, SO or 60 Hz.) 11/CPU CAB + FS 1 RSX-11M RSX-11D RSTS/E lAS RJP04-AA RJP04-AB 44 million word disk pack drive and control unit. Expandable to a total of 8 RP04 disk pack drives. 2.S usec/ word transfer rate, 28 msec average access time. (Drive requires 230 Vac, SO or 60 Hz.) 11/34 11/3S 11/4S FS +2SU 1 RSX-11D RSTS/E lAS RJP04-BA RJP04-BB 44 million word disk pack drive and two controllers for dual access. Expandable to a total of 8 RP04 disk pack drives. 2.S usec/word transfer rate, 28 msec average access time. (Drive requires 230 Vac, SO or 60 Hz.) 11/34 11/3S 11/4S FS +2SU 2 RSX-11 D RSTS/E lAS RJPOS-AA RJP05-AB Single access 88 million byte disk drive and control unit. Expandable to 8 RPOS drives. One disk pack included 1.24Usec/byte transfer rate, 28M sec average access time. Drive requires 230 Vac. 11/CPU 2SU + FS RJPOS-BA RJP05-BB 88 million byte disk drive and control unit. Expandable to 8 RPOS drives. One disk pack included. Dual access (2 Unibus controls) 1.24Msec/byte transfer rate. 28M sec average access time. Drive requires 230 Vac. two 11/CPU 4SU 1+ 1 RWP04-AA RWP04-AB 44 million word disk pack drive and control unit. Expandable to a total of 8 RP04 disk pack drives. 2.S usec/ word transfer rate, 28 msec average access time. 11/70 (11/70) + FS 1 RWP04-BA RWP04-BB 44 million word disk pack drive (with dual access) and 2 PDP-11/70 control units. Expandable to a total of 8 RP04 disk pack drives. 2.S usec/ word transfer rate, 28 msec average access time. 11/70 (11/70) + FS = Description Prerequisite VRK11J-AA VRK11J-AB 2.4 million byte disk cartridge drive and control unit. Expandable to a total of 8 RKOS DECpack disk drives. 11 Msec/word transfer rate, 70Msec average access time (60Hz.) VRK11J-BA VRK11J-BB (ita/ 230v) 27 per control System @+5V Software RT-11 RSX-11S RSX-11M RSX-11D RSTS/E lAS 16 RSX-11 M RSX-11D MUMPS-11 (Q2) RSTS/E lAS 16 RSX-11 M RSX-11D MUMPS-11 (Q2) RSTS/E lAS RSX-11D RSTS/E lAS RSX-11D RSTS/E lAS Option Number = 230v) Mtng Code Bus Load Amps (11170) +2SU + FS per control System @+5V Software Description Prerequisite RWP04-CA RWP04-CB 44 million word disk pack drive (with dual access) and 2 control units; 1 for the PDP-11170 and 1 for the other PDP-11. Expandable to a total of 8 RP04 disk pack drives. 2.S usec/word transfer time, 28 msec average access time. 11170 RWPOS-AA RWP05-AB Single access 88 million byte disk pack drive and control. Expandable to 8 RP drives. One disk pack included. 1.24Msec/byte transfer rate, 28M sec average access time. Drive requires 230 Vac. 11170 (11170) + FS 16 RWPOS-C Dual access kit plus Unibus control. RPOS 11/CPU (RPOS) 2SU 16 RWPOS-CA RWP05-CB 88 million byte disk pack drive and control unit. Expandable to 8 RPOS drives one disk pack included. Dual access controls (1 11170 & 1 Unibus) 1.24Msec/byte transfer rate. 28M sec average access time. Drive requires 230 Vac. RWPOS-UA RJP06 to RWP06 upgrade. RJP06 RPOS-AA RP05-AB Single access 88 million byte disk pack drive and one pack. 1.24Msec/ byte transfer rate. 28M sec average access time. Drive requires 230 Vac. RJPOS-A, or RWPOS-A FS RPOS-BA RP05-BB Dual access 88 million byte disk pack drive and one pack. 1.24Msec/byte transfer rate. 28Msec average access time. Drive requires 230 Vac. RJPOS-B, or RWPOS-B FS (ital RSX-11D RSTS/E lAS 16 RSX-11M & RSX-11D MUMPS-11 (Q2) RSTS/E lAS RSX-11M & RSX-11D MUMPS-11 (Q2) RSTS/E lAS RSX-11M & RSX-11D MUMPS-11 (Q2) RSTS/E RPOS-C RPOS Dual access kit. RPOS (RPOS) RJP06-AA RJP06-AB Single access 176 million byte disk pack drive and control. Expandable to 8 RP drives. One disk pack included. 1.24Msec/byte transfer rate. 28Msec average access time. Drive requires 230 Vac. 11/CPU 2SU + FS RJP06-BA RJP06-BB 176 million byte disk pack drive and control. Expandable to 8 RP drives. One disk pack included. Dual access (2 UNIBUS controls) 1.24Msec/byte transfer rate. 28Msec average access time. Drive requires 230 Vac. two 11170 4SU + FS RJP06-C Dual access kit plus UNIBUS control. RP06 11/CPU (RP06) 2SU RP06-AA RP06-BB Single access 176 million byte disk pack drive and one pack. 1.24nanosec/ byte transfer rate. 28Msec average access time. Drive requires 230 Vac. RJP06-A, or RWP06-A FS RSX-11M RSX-11D lAS RSTS/E MUMPS RP06-BA RP06-BB Dual access 176 million byte disk pack drive and one pack. 1.24nanosec/byte transfer rate. 28Msec average access time. Drive requires 230 Vac. RJP06-B, or RWP06-B FS RSX-11M RSX-11D lAS RSTS/E MUMPS 28 16 RSX-11M & RSX-11D lAS RSTS/E MUMPS 1+ 1 16 RSX-11M & RSX-11D lAS RSTS/E MUMPS 1 16 Option Number (ital = 230v) Description Prerequisite Mtng Code (RP06) Bus Load Amps System @+SV Software RP06-C Dual access kit. RP06 RP06-U RP05 to RP06 upgrade kit. RP05-AA RWP06-AA RWP06-AB Single access 176 million byte disk pack drive control. Expandable to 8 RP drives. One disk pack included. 1.24Usec/ byte transfer rate. 28Msec average access time. Drive requires 230 Vac. 11170 (11170) + FS RWP06-BA RWP06-BB 176 million byte disk pack drive and ~ontrol. Expandable to 8 RP drives. One disk pack included. Dual access (2-11170 controls). 1.24nanosec/byte transfer rate. 2.8Msec average access time. Drive requires 230 Vac. two 11170 (two 11170) + FS 1+ 1 RSX-11M & RSX-11D lAS RSTS/E MUMPS RWP06-CA RWP06-CB 176 million byte disk pack drive and control. Expandable to 8 RP drives. One disk pack included. Dual access (1-11170 & 1 UNIBUS) 1.24Usec/byte transfer rate. 2.8Msec average access time. Drive requires 230 Vac. 11170 & 11/CPU (11170) 1+ 1 RSX-11M & RSX-11D lAS RSTS/E MUMPS RWP06-C Dual access kit plus 11170 control. RP06 11170 (RP06) (11170) RPR02-AM RPR02-BM 20 million byte disk pack drive rebuilt from an RP02. Expandable to 8 drives, 35Usec average seek time, 12.5Usec avg. rotational latency. 6.4 microseconds per word transfer rate. 11/CPU FS RSTS/E(CTS/E) RSX-11D & RSX-11M RT11 lAS MUMPS RPR11-AA RPR11-AB 20 million byte disk pack drive rebuilt from an RP02 and a new control unit built by DEC. 35 Msec avg. seek-time, 12.5 Msec avg. rotational latency. 11/CPU FS+ CAB RSTS/E (CTS/E) RSX-11D & RSX-11M RT11 lAS MUMPS RX11-AA RX11-AD Single 256K byte floppy disk drive and control. 18Usec/byte transfer rate, 483 millisecond average access time. Industry compatible preformatted diskette recording medium. 11/CPU PAN RX11-BA RX11-BD Dual drive version of above. 16 2 RSX-11M RSX-11D lAS RSTS/E MUMPS 1.5 EXPANSION DISK DRIVES RS03-AA RS03-AD 256K word fixed head disk drive. 4 or 8 usec/word transfer rate, 8.5 msec average time. RJS03, RJS04, RWS03, or RWS04 CAB RSX-11M RSX-11D RSTS/E lAS RS04-AA RS04-AD 512K word fixed head disk drive. 4 usec/word transfer rate, 8.5 msec average access time. RJS03, RJS04, RWS03, or RWS04 CAB RSX-11M RSX-11 D RSTS/E lAS VRK05-FA VRKOS-FB 5.0 million byte disk drive with non-removable media (60 Hz). RK11J-AA RK11J-AB PAN RK05F-FC RKOSF-FD (same as above) (50 Hz). RK11J-BA RK11J-BB PAN 29 Option Number = 230v) Mtng Code Bus Load ·Amps @+5V System Software Description Prerequisite 2.S million byte disk drive with removable cartridge. 11 Msec/word transfer rate. 7Msec average access time (60 Hz). RK11J-AA RK11J-AB (same as above) (SO Hz). RK11J-BA RK11J-BB S million byte disk drive with nonremovable media (60 Hz). RK11J-AA RK11J-AB PAN RT-11 RSX-11A RSX-11M RSX-11D RSTS/E lAS 20 million word moving head disk pack drive. 7.S usec/word transfer rate, 42 msec average access time. RP11 FS RSX-11M RSX-11D RSTS/E lAS 44 million word moving head disk pack drive. 2.S usec/word transfer rate, 28 msec average access time. RJP04-A, or RWP04-A FS RSX-11D RSTS/E lAS 44 million word moving head disk pack drive with dual access. 2.S usec/word transfer rate, 28 msec average time. RJP04-B, RWP04-B, or RWP04-C FS RSX-11D RSTS/E lAS PR11 High-speed paper tape reader and control unit. 300 characters/sec. 11/CPU PAN SPC H722 Transformer required for 230 Vac. SO Hz operation of PC11-A or PR11. Mounts on cabinet back. 11/CPU (ital RKOSJ-AA RKOSJ-AB RKOSJ-BA RKOSJ-BB RKOSF-FA RKOSF-FB RKOSF-FC RKOSF-FD RP03-AS RP03-BS RP04-AA RP04-AB RP04-BA RP04-BB PAN Same as RKOSF-FA, FB (SO Hz). + 1.S CAPS-11 RT-11 DOS/BATCH RSX-11D RSTS/E lAS TERMINALS Option Number (ita I = 230v) Description Prerequisite Mtng Code Bus Load Amps @+5V System Software LOCAL TERMINALS LA36-CE LA36-CF LA36-CH LA36-CJ DECwriter II. Hardcopy terminal, 30 cps, 60 Hz, 20mA. DL11-Aor equivalent. (all) DECwriter II. Hardcopy terminal, 30 cps. DL 11-A or equivalent. (all) (all) REMOTE TERMINAL ADAPTOR LAXX-KG EIA/CCITT adaptor for LA36 DECwriter. DL 11-B or equiv. VTS2 DECscope video terminal. 110 to 9600 baud, switch selectable. Separate numeric keypad. 20mA interface. DL 11-A or equiv. 30 FS (all) Option Number (ital 230v) Description Prerequisite VT52-AA VT52-AB DECscope video terminal; 75 to 9600 baud (switch selectable); full duplex operation; 24 lines x 80 character displayable ASCII subset; 20mA current loop. DL11-W, DLVII, FS or equiv. VT52-AE VT52-AF same as above except EIA interface. VT61-AA VT61-AB • DECscope video terminal; 75 to 9600 baud. • (switch selectable); 24 lines x 80 character, • 7 x 8 dot matrix display; 128 character full ASCII; reverse video capability; block mode and character mode transmission; forms mode capability; off-line editing; direct cursor addressing and reading; self-test feature, 20mA. VT61-AC VT61-AD same as above except EIA 202 modem control. VT61-AE VT61-AF same as above except Standard EIA. VT61-A8 VT61 with 20mA, 230V, 50 Hz. DL11 VT61-AC VT61 with EIA 202 modem control, 115 V, 60 Hz. DL 11 VT61-AD VT61 with EIA 202 modem control, 230V, 50 Hz. DL 11 VT61-AE VT61 with standard EIA, 115V, 60 Hz. DL 11 VT61-AF VT61 with standard EIA, 230V, 50 Hz. DL11 = Mtng Code Bus Load Amps @ +5V System Software DL11-W, DLVII, FS or equiv. NOTES: 1 - Local terminals are designed for direct connection to a computer through any 20 mA interface of the appropriate baud rate. These interfaces include the following listed in the Communications section of this price list: DH11, DJ11-AA, DJ11-AC, DL11-A, DL11-C, DM11-DA. 2 - Remote terminals connect to computers via telephone lines to EIA/CCITT standard interfaces. The Communications section of this price list contains information on the following EIA/CCITT interfaces: DH11, DJ11-AA, DL11-B, DL11-D, DL11-E, DM11-DB, DM11-DC. 3 - Remote terminal and data set characteristics (baud rate, etc.) must be matched by the data set and interface at the computer site. COMMUNICATIONS Option Number Description Prerequ isite Mtng Code Bus Load Amps @ +5V System Software ASYNCHRONOUS INTERFACES (FIXED) DL 11-Al,2 Current Loop (20mA) Serial Line Interface. 8-bit character size; 2 stop bits. (Specify speed from Group 1 or 3). 11/CPU SPC 1.8 (all) DL11-8 1,2 EIA/CCITT Serial Line Interface. 25 (7.5m) cable for connection to leased line modem. Does not provide Direct Distance. Dial modem control. 8-bit character size, 2 stop bits. (Specify speed from Group 1 or 3.) 11/CPU SPC 1.8 RSX-11 M RSX-11 D RSTS/E lAS DL11-C Current Loop (20mA) Serial Line Interface with customer specifiable speed, character size, parity and stop bit size. 11/CPU SPC 1.8 NOTES: 1 - If speed is not specified, the DL 11 will be configured for 300 baud. 2 - When ordered as an add-on to an existing unit, specify the unit type (CPU or expander box) and serial number so the proper power-harness type can be supplied. 31 Bus Load Amps Option Number Description Prerequisite Mtng Code DL 11-D EIA/CCITT Serial Line Interface with customer specifiable speed, character size, parity, and stop bit size. Includes 25' (7.5m) cable for connection to leased line modem. (Does not provide Direct Distance Dial modem control.) 11/CPU SPC 1 1.8 DL 11-E Direct Distance Dial Modem Control EIA/CCITT Serial Line Interface with customer specifiable speed, character size, parity and stop bit size. Includes 25' (7.5m) cable for connection to modem. 11/CPU SPC 1 1.8 DL11-W Equivalent of DL 11-A, B, C, D plus the line frequency clock. Clock and features are DPP switch selectable. 11/04 11/34 SPC @+SV RSX-11M RSX-11 D RSTS/E lAS RT-11 RSX-11S RSX-11 D RSX-11M RSTS/E ASYNCHRONOUS INTERFACES (PROGRAMMABLE) DC11-AA Dual clock and system unit mounting for two DC11-DA full-duplex interface module sets. Line speed is program selectable: 110, 134.5, 150,300 baud. (These are typical 103 modem speeds.) 11/CPU SU 0.2 DC11-AB Same as DC11-AA but for 110, 300, 1200, 1800 baud. (Typical 202 modem speeds.) 11/CPU SU 0.2 DC11-AC Same as DC11-AA but for 110, 150,600, 1200 baud. (Typical European speeds.) 11/CPU SU 0.2 DC11-AD Same as DC11-AA but for 50, 110, 134.5, 150 baud. 11/CPU SU 0.2 DC11-AE Same as DC11-AA but for 75, 110, 134.5,150 baud. 11/CPU SU 0.2 DC11-AG Same as DC11-AA but for 134.5, 150,300,1200 baud. 11/CPU SU 0.2 DC11-AH Same as DC11-AA but for 110, 134.5,600, 1200 baud. 11/CPU SU 0.2 DC11-AX Same as DC11-AA but for 110, 134.5,150 baud plus one customer defined baud rate above 600 baud. 11/CPU SU 0.2 DC11-DA Full Duplex Serial Module Set which implements one line. Each DC11-A accommodates two DC11-DA's. Includes EIA/CCITT termination suitable for direct use with 103 or 202 modems. Handles 5, 6, 7, a-bit characters with 1 or 2 stop bits. DC11-A (DC11-A) 2.0 32 System Software Option Number (ita/ =230v) Description Prerequisite Mtng Code Bus Load Amps @+5V System Software ASYNCHRONOUS MULTIPLEXERS (FIXED) DF01-A Originate-only Acoustic coupler in halfor full duplex. Used to connect terminals to ordinary telephone sets & public switched telephone network. Signaling rate up to 300 baud. Supplied with 7.5 ft. cable for connection to teletypewriter. DJ11-AA Asynchronous 16-Line Multiplexer for EIA/CCITT terminals or lines. Customer specifiable speed, character size, parity, and stop bits. Includes distribution panel with 16 DB 25P EIA/CCITT connectors. Not compatible with BA11-ES box. 11/CPU SU+ SM PAN DJ11-AB Asynchronous 16-Line Multiplexer for use with external signal conditioning equipment such as DC08 telegraph interfaces. Customer specifiable speed, character size, parity and stop bits. (No distribution panel.) Not compatible with BA11-ES box. 11/CPU SU DJ11-AC Asynchronous 16-Line Multiplexer for 20mA level conversion. Distribution panel includes 16 4-screw terminal strips for connection of terminals. Customer specifiable speed, character size, parity and stop bits. Not compatible with BA11-ES box. 11/CPU SU+ SM PAN 4.7 1 RSX-11M RSX-11D lAS 4.7 5.3 RSX-11M RSX-11D lAS RSX-11M RSX-11D RSTS/E lAS ASYNCHRONOUS MULTIPLEXERS (PROGRAMMABLE) DH11-AA DH11-AC Programmable Asynchronous 16-Line Multiplexer and mounting panel. Includes space for up to 4 DM11 line adapters (16 lines). Character length, stop bits, parity and baud rates (up to 9600 baud) are programmable on an individual line basis. Not compatible with BA11-ES box. 11/CPU 2 SU+ SM PAN 2 8.4 DH11-AB Programmable Asynchronous 16-Line Multiplexer with data cable for connection to DC08 telegraph line interface. Character length, stop bits, parity and baud rate (up to 9600 baud) are programmable on an individual line basis. (No level conversion/distribution panel.) Not compatible with BA11-ES box. 11/CPU 2 SU 2 8.4 DH11-AD Complete Programmable Asynchrono us 16-line multiplexer. EIA/CCITT only. Includes Direct Distance Dial modem control. Order BC05 cables. Not compatible with BA11-ES box. 11/CPU 2 SUi SM PAN 3 10.8 33 RSX-11M RSX-11D RSTS/E lAS Mtng Code Bus Load Amps 11/CPU 2 SUI SM PAN 2 B.6 RSX-11M RSX-11D RSTS/E lAS 16-line Modem Control Multiplexer for program operation of control leads for 103, 202, or equivalent data sets. DH11-AA or DH11-AC (DH11) 2.B RSX-11M RSX-11D RSTS/E lAS DM11-DA Line Adapter for four 20mA terminals. Includes cables. DH11-AA or DH11-AC (DH11) DM11-DB Line Adapter for four EIA lines (data only). Includes four 25' (7.5m) modem cables. DH11-AA or DH11-AC (DH11) DM11-DC Line Adapter for 4 EIA/CCITT lines which, when used with a DM11-BB, provides Direct Distance Dial modem control. Includes four 25' (7.5m) modem cables. B or 16-line asynchronous mix, programmable speeds on per-line basis, 50-9600 baud. DH11-AA or DH11-AC and DM11-BB (DH11) 11/CPU SPC (hex) SM PAN 2.2 Option Number Description Prerequisite DH11-AE Complete Programmable Asynchronous 16-line multiplexer. EIA/CCITT. Does not include Direct Distance Dial modem contro/. Order BC05 cables. Not compatible with BA11-ES box. DM11-BB DZ11-A @+5V RSX-11M RSX-11D RSTS/E lAS RSX-11M RSX-11D RSTS/E lAS RSX-11M RSX-11D RSTS/E lAS DZ11-B DZ11 :B-line EIA expander. DZ11-A SPC (hex) 2.2 DZ11-C DZ11 :B-Iine 20mA. 11/CPU SPC (hex) SM PAN 3.0 D211-D D211 :B-line 20mA expander. DZ11-C SPC (hex) 3.0 D211-E D211 :16-lines EIA. 11/CPU 2:SPC (hex) SM PAN 2 4.4 D211-F D211 :16-lines 20mA. 11/CPU 2:SPC (hex) SM PAN 2 6.0 DU11-DA Full/half Duplex Synchronous Interface. Programmable character sizes, transmission speeds up to 9600 baud, space character. Interfaces to Bell 201 and 20B Series modems or equivalent. 25' (7.6m) modem cable provided. Data set control included. Clock option for DU11 for use in local PDP-11 to PDP-11 connections without modems. Full/half Duplex NPR Synchronous Interface with programmable transmission speeds up to 10,000 baud. EIA/CCITT termination suitable for direct use with Bell Series 201 and 20B or equivalent modems. Data set control included. Not compatible with 11/05-K, 11/05-L, or SA 11-ES box. 11/CPU SPC DU11-DA (DU11) 11/CPU SU DFC11-A DQ11-DA 34 System Software 2 5.7 RSX-11M RSX-11D RSTS/E lAS Option Number (ital 230v) = Description -_._-------- System Mtng Bus Amps @+Sv Software Prerequisite Load Code ---------------------------------------------.-------- ADDITIONAL DISKS RK05K-11 Cartridge for RK05, (1.2 million words). RK05 (RK05) RP02-P Disk pack for RP03, (20 million words). RP03 (RP03) RP04-P Disk pack for RP04, (44 million words). RP04 (RP04) MAGNETIC TAPE UNITS Dual OECassette transport and control unit. 90,000 character storage capacity per reel. 11/CPU SM PAN + SPC TC11-GA TC11-GB Dual OECtape transport and control unit. Expandable to a total of 4 TU56 dual transports, within the included cabinet. 288K character storage per reel. 11/CPU CAB TMB11-EA TMB11-ED 9-track magnetic tape transport and control unit. Expandable to a total of 8 TU10 transports. 45 in/sec, 800 bpi (industry compatible). 11/CPU except LSI-11 or 11/03 SU CAB 5 RT-11,00S/ BATCH RSX-11M RSX-110 RSTS/E, lAS TMB11-FA TMB11-FD 7-track magnetic tape transport and control unit. Expandable to a total of 8 TU10 transports. 45 in/sec, 200,556, or 800 bpi program selectable (industry compatible). 11/CPU except LSI-11 or 11/03 SU CAB 5 RF11,00S/ BATCH RSX-11M RSX-110 RSTS/E, lAS TMB11-MA TMB11-MB TS03 with 7-inch reels, 12.5, PS, 800 bpi. PAN SU 5 RT-11,00S/ BATCH RSX-11M RSX-110 RSTS/E, lAS TS03-SA TS03-SB Nine-track, 800 bpi tape drive, add-on to the TMB11-MA, MB. TMB11-MA TMB11-MB CAB RT-11 RSX-11S RSX-11M RSX-110 RSTS/E lAS TJU16-EA TJU16-ED Switch selectable 800 or 1600 bpi 9-track magnetic tape transport and control unit. Expandable to a total of 8 TU16 transports. 45 in/sec. 11/CPU CAB +2SU RSX-11M RSX-110 RSTS/E lAS TJU16-EK TJU16-EN 800 bpi 9-track magnetic tape transport and control unit. Expandable to a total of 8 TU16 transports. 45 in/sec. 11/CPU CAB +2SU RSX-11M RSX-110 RSTS/E lAS TWU16-EA TWU16-ED Program selectable 1600/800 bpi 9track magnetic tape transport and control unit. Expandable to a total of 8 TU16 transports. 45 in/sec (industry compatible). 11/70 (11/70) + CAB RSX-11 D RSTS/E lAS 35 1.5 CAPS-11 RT-11 RSX-11M RSX-110 lAS TA11-AA TA11-AB RT-11 RSX-11S RSX-11M RSX-110 RSTS/E lAS Option Number (ital = 230v) Mtng Code Bus Load Amps @+SV System Software Description Prerequisite TWU16-EK TWU16-EN BOO bpi 9-track magnetic tape transport and control unit. Expandable to a total of B TU16 transports. 45 in/sec (industry compatible). 11/70 (11170) + CAB RSX-11D RSTS/E lAS TJU45-EA TJU45-EB Program selectable BOO or 1600 bpi, 9-track magnetic tape transport and control unit. Expandable to B TU45 transports. Tape speed 75 in/sec (industry compatible). 11/CPU CAB +2SU RSX-11M RSX-11D RSTS/E lAS TWU45-EA TWU45-EB Program selectable BOO or 1600 bpi, 9-track magnetic tape transport and control unit. Expandable to B TU45 transports. Tape speed 75 in/sec (industry compatible). 11170 (11170) + CAB RSX-11D RSTS/E lAS TC11 PAN RT-11 RSX-11A RSX-11M RSX-11D RSTS/E lAS EXPANSION TAPE DRIVES TU56 Dual DECtape transport. 2BBK character storage per reel. TU10-EE TU10-EJ 9-track tape transport. 45 in/sec, BOO bpi. TMA11 CAB RT-11 RSX-11M RSX-11D RSTS/E lAS TU10-FE TU10-FJ 7-track tape transport. 45 in/sec. 200,556, or BOO bpi program selectable. TMA11 CAB RT-11 RSX-11 M RSX-11D RSTS/E lAS TU16-EE TU16-EJ Switch selectable 800 or 1600 bpi 9-track magnetic tape transport. 45 in/sec. TJU16 or TWU16 CAB RSX-11M RSX-11D RSTS/E lAS TU45-EE TU45-EF Program selectable BOO or 1600 bpi, 9-track magnetic tape transport. Tape speed 75 in/sec. TJU45 or TWU45 CAB RSX-11M RSX-11D RSTS/E lAS LINE PRINTERS 1BOCps DECprinter I with interface, LA11-PA 132 column. LA11-PB LA1BO-PA or LA1BO-PB BC11S-25, M725B 60 Hz. LA11-PC 1BO CPS DECprinter I with interface, 132 column. LA11-PD LA 1BO-PC or LA 1BO-PD BC11 S-25, M725B 50 Hz. LA1BO-CA LA180-CD Receive only printer, 1BO char/sec. with electronic Head of Form, paper out switch, 6 part forms, 132 columns, paper out override, and a self-test mode. 25 foot cable. Asynchronous 20m A current loop interface. 11/CPU 11/CPU DL11-A, C or DLV11 36 FS Mtng Code Bus Load System Software Option Number (ital = 230v) Description Prerequisite LA1S0-EA LA1BO-ED Receive only printer, 180 char/sec. with electronic Head of Form, paper out switch, 6 part forms, 132 columns, paper out override, upper/lower case, and a self-test mode. 25 foot cable. Asynchronous EIA (RS232) interface (speeds may be limited by local transmission facilities) DL 11-B or DLV11 LA35-CE LA35-CF DECwriter receive only 20mA, 60 Hz. DL11-A or equivalent LA35-CH LA35-CJ DECwriter receive only 20mA, 50 Hz. DL11-Aor equivalent LP11-VA LP11-VD 132 column, 64 character printer and control unit. 300 lines/minute. 11/CPU FS + SPC 1.5 (all) LP11-WA LP11-WD 132 column, 96 character printer and control unit. 230 lines/minute. 11/CPU FS + SPC 1.5 (all) LP11-RA LP11-RB Heavy duty line printer and control unit, 132 columns, 64 characters, 1200 lines/minute. 11/CPU FS + SPC 1.5 (all) LP11-SA LP11-SB Heavy duty line printer and control unit. 132 columns, 96 characters, 900 lines/minute. 11/CPU FS + SPC 1 1.5 (all) LS11-A LS11-B 132 column, 64 character printer and control unit. 60 lines/minute. 11/CPU TT + SPC 1 1.5 CAPS-11 RT-11 RSX-11 M RSX-11 D RSTS/E lAS LV11-BA LV11-BB Electrostatic printer/plotter and control unit. 132 columns, 96 characters, 500 lines/minute. Plotting rate of 120,000 dots/ second. 11/CPU FS + SPC 1 1.5 CAPS-11 RT-11 DOS/BATCH RSX-11M RSX-11 D RSTS/E lAS Amps @+SV FS CARD READERS CD11-A CD11-B 1000 card/minute reader and control unit. SO column punched cards. 1000 card hopper capacity. 11/CPU TT+SU 2.5 RSX-11 D RSTS/E lAS CD11-EA CD11-EB 1200 card/minute reader and control unit. 80 column punched cards. 2250 card hopper capacity. 11/CPU FS+SU 2.5 RSX-11D RSTS/E lAS CM11-FA CM11-FB Mark sense and punched card reader 285 cards/minute. Includes control unit. 11/CPU TT + SPC 1 1.5 RSX-11D RSTS/E lAS CR11 CR11-A Punched card reader and control unit. 300 cards/ minute. 11/CPU TT + SPC 1 1.5 RT-11 RSX-11M RSX-11D RSTS/E lAS Note: The LV11 is supported as a line printer by the operating systems. For plot module. it is supported by BASIC and FORTRAN under RT11, or FORTRAN under DOS-BATCH. 37 Option Number = 230v) Mtng Code Bus Load Amps @+5V Description Prerequisite PC11-A High-speed paper tape reader/ punch and control unit. 300 characters/sec reading, 50 char/sec punching. 11/CPU PAN SPC DQ11-EA Full/half Duplex Synchronous NPR Interface to Bell System 303 or equivalent modems. Transmission speeds up to 1.0 megabaud. Data set control included. Not compatible with 11/05-K, 11/05-L, or BA11-ES box. 11/CPU SU DQ11-KA Crystal Clock option. Crystal in Hertz is 16 x baud rate for baud rates equal to or less than 250,000 baud and 2 x baud rate for baud rates greater than 250,000. For use with DQ11-DA or DQ11-EA when modem is not used. DQ11-EA or DQ11-DA (DQ11) DQ11-AB Error Detection option for DQ11-DA or DQ11-EA. Performs hardware CRC or LRC. DQ11-EA or DQ11-DA SU (must be adjacent to DQ11) 1.2 DQ11-BB Protocol option with provisions for character recogn ition and hardware sequence control for protocol handling. DQ11-AB (DQ11-AB) 1.6 DUP11-DA Single line, synchronous interface, up to 9600 bauds, double character buffered receive and transmit full or half duplex, byte or bit oriented protocols, CRC-16 generation and checking, CAC/CCITT generation and checking, interface to Bell 201, 208, 209 modems or equivalents, auto answering capability, modem control. 11/CPU SPC (hex) 1 3.6 DV11-AA Synchronous Communications Multiplexer. Includes basic logic, micro-processor, and modem control. 11/CPU 2SU 2 15 DV11-BA Distribution Panel and Line Cards for 8 lines. Maximum of 2 DV11-BAs may be used with a DV11-AA. Order BC05D-25 EIA cable. DV11-AA SMPAN (ita/ System Software PAPER TAPE + 1.5 5.7 AUTO DIAL INTERFACES DN11-AA System Unit Mounting and control for up to 4 DN11-DA Module sets. 11/CPU SU DN11-DA Module Set Interface to Bell 801 ACU. Includes 25' (7.5m) cable. A DN11-AA accommodates up to four DN11-DAs. DN11-AA (DN11-AA) 1.0 NETWORK LINK DMC11-AD DDCMP Microprocessor Module, full or half duplex, point to point, 8-bit bytes, 16-bit IUPR data transfer, for highperformance interconnection of PDP-11 computers up to 1 mega baud. 11/CPU SPC (hex) 1 4.0 DMC11-DA Remote line unit module, EIA CRC-16 block check, 19,200 bps. DMC11-AD SPC (hex) 1 2.5 38 CAPS-11 RT-11 DOS/BATCH RSX-11A RSX-11D RSTS/E lAS Option Number (ital 230v) = Description Prerequisite DMC11-MA Local line unit modules for DMC11-AO, CRC-16 block check, up to 6,000 ft. separation, NRZ 1,000,000 bps. OMC11-AD DMC11-MO Local line unit modules for DMC11-AD, CRC-16 block check, up to 18,000 ft. separation, NRZ, 56,000 bps. DMC11-AD BC03N-AO 100 ft. coaxial cable. OMC11-MA or DMC11-MO Mtng Code Bus Load Amps SPC (hex) 1 2.5 @+5V LINE SIGNAL CONDITIONERS AND ADAPTORS DF11-F TTL to 20m A active local Teletype loop. Connector is Amp Mate-N-Lok for connection with customer-supplied 22AWG, 2 twisted pair cable to local or remote (up to 1500' or 457m). Model 33 or 35 Teletype. DH11 DF DF11-G TTL to Bell System 301/303 Dataset Interface, signal levels, cable connector, and signal pinning compatible with the Bell 301/303 Datasets. Supplied with 25' (7.5) cable. Signalling rates to 250K baud. DP11 DF DF11-K TTL to active or passive 4-wire current mode (20m A) loop. Connector is Amp Mate-N-Lok for connection with customersupplied cable. Signalling rates up to 2400 baud, at distances up to 1500 feet (457m). OH11, DL 11 with DD11-B OF DF11-A TTL to EIA/CCITT voltage levels. 25' (7.5m) cable with DB25P 25-pin male data set plug. Signalling rates up to 9600 baud. DH11, DP11 DF H312-A Null Modem allows direct connection of any peripheral having an EIA interface. May be used with a DL11-B, DL 11-0, DL11-E, DM11-DB, or DU11-DA with DFC11. H313-A Teletype Dataset Adaptor converts DIGITAL supplied TTY output for use with Bell 103 Dataset or equivalent. LT33 TT TELEGRAPH INTERFACES H316-A H316-B Dual Telegraph Line Interface for two common carrier or private telegraph circuits. Supplied with two 25' (7.5m) cables. Data rates from 10 to 500 bps. DL11, OL 11-A DC08-CS Telegraph Line Interface Panel. Accommodates up to 16 DC08-CM Dual-Line Adapters. Consists of wired system unit, rack, and control modules. DH11-AB, DJ11-AB DC08-CM One Dual Telegraph Terminal and Receive Line Adapter. Implements 2 transmit and receive telegraph line interfaces in the DC08-CS. DC08-CS 793 79S-A Power Supply to provide power to the transmit side of telegraph line. DC08-CS 39 CAB 0.2 System Software Option Number (ital 230v) = Description Prerequisite DC08-EB Telegraph Line Current Adjustment Panel. Provides line current monitoring and adjustment for 32 telegraph receive and transmit lines. DC08-CS 893 Fuse Panel; provides individual line fuses for each of 32 telegraph lines (receive and transmit). 793 DC08-D Distribution Panel; provides individual terminal blocks to facilitate connection of 32 telegraph lines. DC08-CS Amps @+5V System Software SPC 1.5 RSX-11D RSTS/E lAS DF 2.8 DF 2.8 Mtng Code Bus Load COMMUNICATIONS ACCESSORIES M405 Clock Card. Required for non-standard speed. Second M405 for an additional speed. DH11 BC04R-12 4 Spade Lugs to male Amp Mate-N-Lok connector. 25' (7.5m) Cable with Cinch DB23S socket and DB25P plug. 10' (3m) Cable with Cinch DB25S socket and DB25P plug. DJ11-AC BC05D-25 BC05D-10 959-A Eight 8-pin Male Mate-N-Lok connectors with pins. 959-B Eight 8-pin Female Mate-N-Lok connectors with pins. DJ11-AA DJ11-AA ARITHMETIC OPTION KG11-A Communications Arithmetic Option. Computes Cyclic Redundancy Check (CRC), Longitudinal Redundancy Check (LRC), and Block Check Characters (BCC). DP11 or DU11 ACOUSTIC COUPLERS AND INTEGRAL MODEMS DF11-BA Originate-Only Integral Modem (103-type) for use with a remote terminal. 25' (7.5) cable and connector provided for connection with Bell System Data Access Arrangement CDT or to private wireline channels. Signaling rate up to 300 baud. DF11-BB Answer-Only Integral Modem (103-type) for use with central computer. 25' (7.5m) cable and connector provided for connection with Bell System Data Access Arrangement CDT or CBS or to private wireline channels. Signaling rate up to 300 baud. DH11, DC11, DL11 with DD11-B NOTES: 1 - DJ11-A baud rates must be selected in four line groups from the following speeds: 75, 110, 134.5, 150,300,600, 1200, 1800, 2400, 4800, 9500. Character size, parity, and stop bits should be specified from the choices listed in point 5 below. 2 - DL11-A and DL11-B require specification of baud rate from group 1 or 3 in the table below. 3 - DL11-C, DL11-D and DL11-E customers must select baud rate, character size, stop bits and parity. CHARACTER SIZE 5, 6, 7, 8 PARITY-None, Odd, Even STOPS BITS-1, 1.5, 2 DL11 BAUD RATES Group 1 :110 Group 2: 134.5 Group 3:50, 75, 150, 300, 600, 1200, 1800, 2400 Group 4: 200, 300, 600, 1200, 2400, 4800, 7200, 9600 40 INTERFACE EQUIPMENT Option Number (ital = 230v) Description Prerequisite Mtng Code Bus Load Amps @+SV System Software 2 4 RT-11 GENERAL PURPOSE INTERFACES AR11 Analog Real-Time Subsystem; includes 10-bit AID, 16-channel multiplexer, sample and hold, two 10-bit D/A's, scope control, and crystal clock with programmable frequencies. Normally used with BC11-20 or BC08R cables and H322 distribution panel. 11/CPU SPC (hex) DR11-B Director Memory Access Interface. Moves data directly between user's device and memory (NPR operation). Includes word count, current address, and data registers. 11/CPU SU 3.2 DR11-C General Purpose Digital Interface. Permits bidirectional 16-bit parallel transfers between the user's device and the UNIBUS. Includes all necessary interrupt, address, and control signals and allrequired cable connectors. 11/CPU SPC 1.5 DR11-K General Purpose Digital Interface. Permits bidirectional 16-bit parallel transfers between the user's device and the UNIBUS. Each line can generate an interrupt. Includes all necessary interrupt, address, and control signals and all required cable connectors. 11/CPU SPC (hex) 2.5 DR11-KT DR11-K plus two BC08R-8 plus H322. 11/CPU SPC (hex) SM PAN 2.5 DR11-L Two word input UNIBUS interface. 11/CPU SPC 1.5 DR11-M Two word output UNIBUS interface. 11/CPU SPC 1.5 H322 Distribution Panel. Distributes signals from two 40-pin Berg connectors to nine 10-screw terminal strips. AR11 or DR11-K SM PAN INTERFACE MODULES M105 Address Selector Module, 4 addresses. MOD 0.3 M783 UNIBUS Transmitter Module, 12 drivers. MOD 0.2 M784 UNIBUS Receiver Module, 16 receivers. MOD 0.2 M785 UNIBUS Transceiver Module, 8 drivers and 8 receivers. MOD 0.3 M786 General Purpose Interface Module 16-bit Flip-Flop Register with bus receivers and transmitters. MOD M920 UNIBUS Connector Module. Used to interconnect System Units. MOD M7821 Interrupt Control Module, 2 interrupts. MOD 41 MOUNTING HARDWARE Option Number (ital = 230v) Prerequisite Mtng Code Cabinet with a single sliding drawer extension mounting box. Provides mounting space for 9 System Units. Includes power supply which provides 3 (+5V) Regulators (75 amps) and power for up to 64K words of core memory. 11/CPU CAB Rack Mountable Extension Mounting Box. Provides mounting space for 5 Systems Units. 11/CPU PAN Description Bus Load Amps @+5V CABINETS & EXTENSION MOUNTING BOXES H960-0H H960-DJ BA11-KE BA11-KF H720-F H720-E Power Supply for BA11-ES. Provides 22 amps at +5V, and 10 amps at -15V. H744 +5V regulator, provides 25 amps. H952-AA End Panel for standard cabinet. H957-FA End Panel (right side) for short cabinet. 11/35 (BA11-ES) (22) (11/35) (25) H957-FB End Panel (left side) for short cabinet. H952-HA Free-standing table. H960-CA Standard POP-11 Cabinet, 72:' (1.8m) high. Includes fans,),)ower distribution panel, extension feet, and front bezel panels. 11/CPU CAB H961-A Free-standing Cabinet, 72" (1.8m) high. Includes fans and front bezel panels. 11/CPU CAB H967-CA Short POP-11 Cabinet, 50" (1.3m) high. Includes fans, power distribution panel extension feet, and front bezel panels. 11/CPU CAB H960-CB H967-CB (75) FS SYSTEM UNITS BB11 Blank Mounting Panel for custom interface design and mounting System Units. 11/CPU SU 0011-A Peripheral Mounting Panel. Includes UNIBUS Connector Module M920. Accommodates up to 4 small peripheral controllers. 11/CPU SU 0011-B Peripheral Mounting Panel. Includes UNIBUS Connector Module M920. Accommodates up to 4 small peripheral controllers of 2 OF11s with OL 11s and 2 small peripheral controllers. Not compatible with BA11-ES box. 11/CPU SU 0011-C Four-slot backplane for 11/04 or 11/34. 11/04 11/34 SU 0011-0 Nine-slot backplane for 11/04 or 11/34. 11/04 11/34 Dual SU 11/CPU SU UNIBUS EXTENSION HARDWARE OB11-A UNIBUS Repeater. Allows an additional 18 unit loads and an additional 50 ft (15.2m) of UNIBUS to be added. (Note: The OB11-A provides capacity for an additional 20 unit loads but itself uses 2 unit loads.) 42 2.2 System Software Option Number (ital = 230v) Description Prerequisite Electronic switch allows the switchselectable connection of one UNIBUS to either of two additional UNIBUSes. Provides manual operation. BC11A-02 2 ft UNIBUS cable. (0.6m) 11/CPU BC11A-05 5 ft UNIBUS cable. (1.5m) 11/CPU 12 ft UNIBUS cable. (2.6m) Bus Load Amps @ +SV System Software PAN DT03-FM DT03-FP 1 Mtng Code BC11A-8F 8 BC11A-10 10 ft UNIBUS cable. (3m) 11/CPU BC11A-15 15 ft UNIBUS cable. (4.5m) 11/CPU BC11A-25 25 ft UNIBUS cable. (7.6m) 11/CPU 11/CPU SPARE PARTS & MAINTENANCE KITS Several spare parts kits are provided for the customer who requires minimum down time or for those performing their own maintenance. Complete circuit boards are available in some kits for simple, plug-in replacement of a faulty board. A full set of circuit boards also aids in troubleshooting and isolating a hardware malfunction. Individual electrical components are available in Spare Parts Kit SP11-KF. This kit is for the customer planning to do his own board repair. KM11-A Maintenance Module light and switch card for examination of machine states. 11/CPU SP11-KE Spare parts for KD11-B 11/05 SP11-KF Spare parts for KD11-A 11/35 SP11-KG 11/05 Components spares 11/05 SP11-MC Spare modules for MM11-K/L/M/S and MF11-L MM11-K, -L, -M, -S, orMF11-L SP11-PB Spare Parts for H720-E and H720-F H720-E or H720-F SP11-PC Power supply assembly spares 11/35/45 or /50 SP11-PE Spare parts for H740 H740 SP11-PS Power supply spare parts H720 SP11-PT H740 power supply spare parts 115V H740 SP11-UM 1105-K 4K to 8K upgrade memory kit 11/05-K 55-9081-03 Transparent overlay for KM11 to check RK11. KM11-A 55-9081-05 Transparent overlay for KM11 to check TM11. KM11-A 55-9081-12 Transparent overlay for KM11 to check KD11-A. KM11-A 11/35 43 CPU SOFTWARE PRODUCTS The PDP-11 software products listed here are furnished under a license for use on a single computer system and can be copied (with the inclusion of DIGITAL's copyright notice) only for use in such system, except as may otherwise be provided in writing by DIGITAL. The first license for any software product must be ordered at the full standard list price for the software including all applicable services. The second and following licenses for a particular software product may be ordered with or without the applicable services. The basic OEM license (no services) includes a copy of the binary system and (in some cases) partial sources required to generate the binary system, and a set of manuals and documentation for the system. A list of the specific components of the binary system and of the documentation may be found in the appropriate Software Product Description. The option numbers listed here refer to the binary, source, or listing software package for the product. In most cases, where source and listings are available, they are licensed separately and require the execution of a source license agreement in addition to a license to use the binary software package. For a complete description of any of the PDP-11 software products listed here (including a detailed statement of any included software support and training and optional software maintenance) refer to the DIGITAL Software Product Description for that software product. The Software Product Description is the official description of the software product. A brief description is given here for each software product, including the software support category, and minimum hardware required to operate. Information for software products is given under the following headings: Option Number An option number, similar to hardware products, is used to identify and order the software product. Note that all software numbers begin with the letter Q. Distribution Medium and Format In many instances, the binary package for the software product is available on more than one physical distribution medium. (The license fee in all cases includes the cost of the medium itself). The second letter after the dash in the option number identifies the distribution medium. Each software product is available only on those media specifically listed for that product. 8-Paper tape C-DECtape D-Magtape (9-track) E-DECpack (RK05 disk cartridge) F-Magtape (7-track) N-DECassette Where the listing or source tape is also available, its option number is specified. Description A summary description of the software product. Software Support Category The software product includes, in the license fee, at minimum, the service specified for the category indicated. A-On-site installation, and one year Software Performance Reporting (SPR) Service, remedial service within the first 90 days. 8-0ne year Software Performance Reporting (SPR) Service. C-AII services, if available, at a fee. For a complete description of the included and optional software support and services for a product, refer to the Software Product Description. CASSETTE BASED SOFTWARE CAPS-11 DESCRIPTION: CAPS-11 (Cassette Programming System) is a system using magnetic tape DECassettes as a file structured medium. The system supplies a true operating system environment at prices lower than high-speed paper-tape systems. 45 SOFTWARE COMPONENTS: Monitor, relocating assembler, linker, editor, debugging tool, and PIP file utility program. MINIMUM HARDWARE: PDP-11, SK memory, console terminal, and TA11 dual DECassette system. PREREQUISITE SOFTWARE: None. Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion of Digital's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by Digital. Source and/or listing options are only available after the purchase of at least one full-support binary license and after a source license agreement is in effect. The following key (N,R) represents the distribution media for the product and must be specified at end of "Q" number i.e., QJ1S0-AN binaries on Cassette. = N - Cassette (TU60) R - Microfiche STANDARD OPTIONS QJ1S0-A-Single-use license, binaries, documentation, Support Services (media: N). SOURCE/LISTING OPTIONS QJ1S0-E-AII sources (media: N). QJ1S0-F-Listings (media: R). Additional Services QJ1'SO-S-lnstallation Service (media: Z). Support Category B, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy Software Updates, if any, released by Digital during the one (1) year period following installation, will be provided to the customer on the standard distribution media listed in the SPD as the then current warranty update price. After the first year, updates, if any, will be made available according to then prevailing Digital policies. DISK OPERATING SYSTEMS RT-11 DESCRIPTION: RT-11 is a high-performance Foreground/Background (F/B) operating system designed for the single user involved in program development and/or Real-Time applications. It is small, fast, easy-to-use, learn, and modify. Two responsive, interactive monitors are provided, a Foreground/Background monitor, and an even smaller single-job monitor. SOFTWARE COMPONENTS: F/B monitor, single-job monitor, editor, MACRO assembler, linker, librarian, debugging tool, and PIP utility program. MINIMUM HARDWARE: PDP-11, SK memory (16K memory for F/B), and console terminal; plus TC11 dual DECtape system; or RK11 DECpack disk system with TA11 dual DECassette system or PC11 high-speed paper tape reader/punch. PREREQUISITE SOFTWARE: None Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion of DIGITAL's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by DIGITAL. Standard options with no support services are only available after the purchase of one supported license and after either an OEM Agreement or End-User Waiver of Support Agreement is in effect. When a software license is ordered without support services, the category of support applicable to such software is Category C. Source and/or listing options are only available after the purchase of at least one supported binary license and after a source license agreement is in effect. STANDARD OPTIONS QJ003-A- Single-use license for RT-11, binaries, documentation, support services (media: B, C, D, E, F, N, Y) QJ926-A- Single-use license for RT-11 and FORTRAN/RT-11, binaries, documentation, support services (media: C, D, E, F, Y) QJ003-C- Single-use license for RT-11, binaries, documentation, no support services (media: B, C, D, E, F, N, Y) 46 SOURCE/LISTING OPTIONS QJ003-E- All sources (media: C, 0, E, F, Y) QJ003-F- Listings (media: R) UPGRADE OPTIONS The following option is available as an upgrade kit from DOS/BATCH. QJ260-A- Single-use license for RT-11 and FORTRAN/RT-11, binaries, documentation, support services (media: B, C, E, N) UPDATE OPTIONS Users of RT-11 Version 2B or earlier may purchase the following. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ003-HQJ926-HQJ003-N- RT-11 binaries, documentation, no support services (media: B, C, 0, E, F, N, Y) RT-11 and FORTRAN/RT-11 binaries, documentation, no support services (media: C, D, E, F, Y) RT-11 source update (media: C, 0, E, F, Y) Additional Services QJ003-S- Consulting Service (media: Z) Training Credits 1, Consult the latest Educational Services Catalog for available courses. Support Category A, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. DOS/BATCH-11 DESCRIPTION: DOS/BATCH-11 is both a keyboard oriented program development system, and a batch oriented job processing system. It includes an ANSI standard FORTRAN IV compiler and object time system, and a Batch Command language (BCl). SOFTWARE COMPONENTS: Monitor, editor, MACRO assembler, linker, librarian, debugging tool, PIP file utility program, FORTRAN IV compiler and object time system; File compare, verify and dump programs: Magtape EBCDIC to ASCII conversion, disk initializer, and device-to-device fast copy program. MINIMUM HARDWARE REQUIRED: PDP-11 E1 0 System or 16K System Memory PDP-11 Central Processor RF11 256K word fixed-head disk system, or RK11 1.2M word removable cartridge DECpack disk (16K memory minimum), or RP11 C 20M word disk pack (24K memory minimum and magnetic tape) BM792-YB or MR11-DB Bootstrap Console Device TM11 Magnetic Tape or TC11 DECtape Unit KW11 lor KW11 P Clock Prerequisite Software: None Ordering Information STANDARD OPTIONS QJ250-AQJ250-DQJ252-AQJ252-DQJ035-AQJ035-D- Single-use license, binaries and documentation for Monitor, System Programs, FORTRAN Compiler and OTS, Support Services (media: C, 0, E, F) Single-use license only for DOS/BATCH w/FORTRAN, no Support Services (media: Z) Single-use license, binaries and documentation for Monitor and System Programs, Support Services (media: C, 0, E, F). Single-use license only, no Support Services (media: Z). Single-use license, binaries and Support Services (media: C, D, E, F). Single-use license only, no Support Services (media: Z). 47 SOURCE AND LISTING OPTIONS Customer must first purchase a DOS/BATCH-11 single-use license (QJ250 or QJ252), then may order: QJ252-EQJ252-FQJ253-EQJ253-F- Sources for Monitor and System Programs (media: C, D, E, F). Listings of Monitor and System Programs (media: R). Sources for Device Drivers (media: C, D, E,F). Listings of Device Drivers (media: R). Customer must first purchase a DOS/BATCH-11 single-use license (QJ250 or QJ035), then may order: QJ031-EQJ031-FQJ033-EQJ033-F- Sources for the FORTRAN Compiler (C, D, E, F). Listings of FORTRAN Compiler (media: R). Sources for FORTRAN OTS (media: C, D, E, F) Listings of FORTRAN OTS (media: R). UPDATE OPTIONS Update for customers with either DOS-11, BATCH-11 or DOS/BATCH-11: Prerequisite Software: DOS or BATCH version 9-20C or 8.08 or 8.02 or 4. QJ250-H- Single-user license, binaries and documentation for Monitor, System Programs, FORTRAN Compiler and OTS, no Support Services (media: C, D, E, F). Additional Services Three extended software maintenance contracts are offered to DOS/BATCH-11 customers. INFORMATION UPDATE SERVICE This service provides the subscribers with monthly issues of the "Software Dispatch" and Software Performance Report (SPR) Services for a period of one year starting with the date of subscription. Support Category A; Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, update policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year updates, if any, will be made available according to then prevailing DIGITAL policies. MULTI-USER TIME-SHARED OPERATING SYSTEM RSTS!E DESCRIPTION: RSTS/E (Resource Sharing Time-Sharing System/Extended) provides versatile and rapid system access to up to 32 simultaneous users, through the BASIC-PLUS language. BASIC-PLUS is an extended version of Dartmouth BASIC, and combines with the RSTS/E monitor and utility programs to provide full interactive computing services for multiple users. SOFTWARE COMPONENTS: Monitor, utility routines, and BASIC-PLUS language processor. MINIMUM HARDWARE REQUIRED: Although not necessarily a recommended configuration, the minimum hardware configuration on which a RSTS/E system can be generated and operated consists of one of each of the following: • • • • • • PDP-11/34, PDP-11/35, PDP-11/40 with KE11-E, or PDP-11/45, or PDP-11170 32K words (BASIC-PLUS only) of parity memory with KT11 Memory Management KW11 Clock ROM Bootstrap for Disk! Tape Console terminal: LA30, LA36, VT05, VT50, LT33 or LT35 One of the following disk systems: 1. 2. 3. 4. 5. 6. RK11 Disk cartridge controller (includes RK05 drive) with additional RK05 drive RJP04 (or RWP04 for 11/70 only) Disk pack controller (includes RP04 drive) RP11 Disk pack controller (includes RP03 drive) RPR11 Disk pack controller (includes RPR02 drive) RF11 Fixed-head disk controller (includes RS11 drive) with additional RS11 drive RK11 Disk cartridge controller (includes RK05 drive) and RF11 Fixed-head disk controller (includes RS11 drive) 7. RK11 Disk cartridge controller (includes RK05 drive) and RJS03/RJS04 (or RWS03/RWS04 for 11170) Fixedhead disk controller (includes RS03/RS04 drive) 48 • One of the following magnetic tape systems (not required for dual RK11 disk systems): 1. TJU16 (or TWU16 for 11170) Magnetic tape controller (includes TU16 transport) 2. TM11/TMA11 Magnetic tape controller (includes 7- or 9-track TU10 transport or TS03 transport) 3. TC11 DECtape controller (includes TU56 dual transport) Ordering Information STANDARD OPTIONS QR430-AQR430-CQR430-D- Single-use license, binaries, documentation, support services (media: C, D, E, F, P) Single-use license, binaries, documentation, no support services (media: C, D, E, F, P) Single-use license only (media: Z) SOURCE/LISTING OPTIONS QR430-FQR432-FQR433-F- Listings (media: R) Monitor and SYSGEN Listings (media: R) BASIC-PLUS, all run-time systems listings (media: R) UPGRADE OPTIONS The following option is available as an upgrade kit from RSTS-11 and requires previous purchase of one license with support services. QR400-H- Single-use license, binaries, documentation, support services (media: C, D, E, F) UPDATE OPTIONS Users of RSTS/E whose license does not include free updates under warranty, whose warranty has expired, or whose Standard Program Update Service has expired, may purchase the following. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QR430-H- Binaries, documentation (media: D, E, F, P) MISCELLANEOUS OPTIONS QR430-G- BASIC-PLUS and User's manuals (media: Z) Support Category A, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, updates will be supplied at no charge. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. MULTI-FUNCTION TIME-SHARED, REAL-TIME, & BATCH OPERATING SYSTEM lAS DESCRIPTION: lAS (Interactive Application System) is a multi-function, multi-language operating system capable of supporting timesharing, real-time and batch programming concurrently. It supports up to 16 interactive terminals and versions of BASIC, FORTRAN, COBOL, and MACRO assembler. SOFTWARE COMPONENTS: Executive, MACRO assembler, editor, task builder (linker and overlay builder), debugging tool, file utilities, and text output utility (RUNOFF). MINIMUM HARDWARE REQUIRED: One operator terminal (from Terminals section) One user terminal (from Terminals section) 64K words of memory (128K bytes) One processor system: • PDP-11170 • PDP-11/45 with KT11-C memory management option, one bootstrap One of the following mass storage packages: • RK11 disk cartridge controller (includes one RK05 drive) with two additional RK05 drives • RPR11 disk pack controller (includes one RPR02 drive) with one of the following: 1. TMA 11 magnetic tape controller (includes one 9-track TU1 0 drive) 2. TJU16/TWU16 magnetic tape controller (includes one TU16 drive) • RP11 disk pack controller (includes one RP03 drive) with one of the following: 1. TMA 11 magnetic tape controller (includes one 9-track TU1 0 drive) 2. TJU16/TWU16 magnetic tape controller (includes one TU16 drive) 49 • RJP04/RWP04 disk pack controller (includes one RP04 drive) with one of the following: 1. TMA 11 magnetic tape controller (includes one 9-track TU1 0 drive) 2. TJU16/TWU16 magnetic tape controller (includes one TU16 drive) A 96K word, PDP-11!70 system configured with an RP04 disk is recommended for support of a 10 to 12 terminal user environment, executing both batch and interactive users. The 64K word, PDP-11/45 system is the minimum for support of a two terminal system running either interactive or batch tasks. This system provides only a 20K to 24K word user area depending on which device handlers are memory resident. STANDARD OPTIONS QR300-AQR300-C- Single-use license, binaries, documentation and modules, support services (media: D, E) Single-use license, binaries, documentation, no support services (media: D, E) SOURCE/LISTING OPTIONS QR300-MQR301-MQR302-M- All Program Sources plus listings on Microfiche (media: D, E) Monitor Sources plus listings on Microfiche (media: D, E) Utility Sources plus listings on Microfiche (media: D, E) UPGRADE OPTIONS The following options are available as an upgrade kit from RSX-11 D. The no-support option is available only after the purchase/conversion of at least one full-support license. QR303-AQR303-C- Single-use license, binaries, key source modules, documentation, support services (media: D, E) Single-use license, binaries, key source modules, documentation, no support services (media: D, E) UPDATE OPTIONS Users of lAS, Version 1 whose warranty has expired, or whose Standard Update Service has expired, may purchase the following. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QR300-H- Binaries, documentation (media: D) Users of lAS whose license does not include free updates under warranty, and whose warranty has not expired, may purchase the following. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QR300-W- Binaries, documentation (media: D) MISCELLANEOUS OPTIONS QR300-G- Pre-delivery kit (media: Z) Additional Services None. Support Category A, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. REAL-TIME MULTI-PROGRAMMING SYSTEMS RSX-11D DESCRIPTION: RSX-11D is a real-time disk based multi-programming system for the PDP-11/35, PDP-11/45 and PDP-11!70, utilizing hardware memory management and protection. Installed tasks run concurrently, at one of 250 software priority levels, are event driven, and dynamically scheduled. A background BATCH capability and FORTRAN compiler and object-time system are included. SOFTWARE COMPONENTS: Executive, MACRO assembler, line editor, task builder (linker and overlay builder), debugging tool, PIP file utility program; file exchange program. FORTRAN compiler and object-time system. MINIMUM HARDWARE REQUIRED: • One console Terminal (from Terminals section) • 48K words of memory 50 • One of the following Processor systems: PDP-11/35, KE11-E, KT11-D, one bootstrap, one clock PDP-11/40, KE11-E, KT11-0, one bootstrap, one clock PDP-1/45, KT11-C, one bootstrap, one clock PD-11170 • One system disk RK11 (one RK05 drive) RPR11 (one RP02 drive) RP11 (one RP03 drive) RJP04/RWP04 (one RP04 drive) • One of the following: An additional RK05 drive TMA 11/TM11 (one 9-track TU1 0 drive) TMA11/TM11 (one 7-track TU1 0 drive) TJU16/TWU16 (one TU16 drive) Optional Software Supported Other software available under separate license agreement are: COBOL, a PDP-11 ANSI 74 Compiler FORTRAN IV-PLUS, a high performance FORTRAN Compiler RSX-11 D/2780 Emulator Package Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion of Digital's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by Digital. Binary Options with no support services are only available after the purchase of at least one full-support license and after either an "OEM Agreement" or End-User "Waiver of Support Agreement" is in effect. When a software license is ordered without services, the category of support applicable to such software is Category C. Source and/or listing options are only available after the purchase of at least one full-support binary license and after a source license agreement is in effect. The following key (D, E, F, P, R, Z) represents the distribution media available for binaries on 9-track Magtape. at the end of the "Q" number, i.e., QJ580-AD = th~ product and must be specified o - 9-track Magnetic Tape Kit (TU10 & TU16) DECpack Kit 7-track Magnetic Tape Kit 9-track Magtape (TU16) Microfiche Z - No Hardware Dependency E F P R - STANDARD OPTIONS QJ580-A- Single-use license, binaries, selected source modules, support services, documentation (media: D, QJ580-C- Single-use license, binaries, selected source modules, no support services, documentation (media: D, E, F) E, F) SOURCE/LISTING OPTIONS Microfiche listings of updates are provided automatically, at no extra charge, to those customers who have purchased microfiche and are within the first year following installation or are subscribers to the Standard Binary Program Update Service. QJ580-EQJ583-EQJ584-EQJ585-EQJ580-FQJ583-FQJ584-FQJ585-F- All Program Sources (media: 0, E, F)* Utility Program Sources (media: D, E, F)* FORTRAN IV Compiler Sources (media: D, E,F)* Exec., Drivers, File System, FORTRAN OTS Sources (media: D, E, F)* All Program Listings (media: R) Utility Program Listings (media: R) FORTRAN IV Compiler Listings (media: R) Exec., Drivers, File System, FORTRAN IV OTS Listings (media: R) • Includes listings on microfiche. 51 UPGRADE OPTIONS The following options are available as an upgrade kit from RSX-11 M to RSX-11 D. The no-support option is available only after purchase/conversion of at least one full-support license. QP580-AQP580-C- Single-use license, binaries, key source modules, support services, documentation (media: D, E, F) Single-use license, binaries, key source modules, no support services, documentation (media: D, E, F) UPDATE OPTIONS Users of RSX-11 D, Version 4 whose Standard Binary Program Update Services have expired, may purchase the following: QJ580-HQJ580-NQJ580-N- Update of binaries, key source modules, documentation, no support services (media: D, E, F) Update of all Program Sources (media: D, E,F)* Update of all Program Listings (media: R) MISCELLANEOUS OPTIONS QJ580-G- Predelivery kit (media: Z) Additional Services After the first year, two extended software maintenance contracts are offered: INFORMATION SERVICE This contract service provides the subscriber with monthly issues of the "RSX-11 D Dispatch" (System newsletter) and the Software Performance Reporting (SPR) Service for a period of one year, starting with the date of subscription to the contract. QJ580-2- Information Service (media: Z). STANDARD BINARY PROGRAM UPDATE SERVICE This one year contract includes the information service as well as providing the subscriber with software updates, at no additional charge, as they become available during the subscription period. QJ580-3- Standard Binary Program Update Service (media: D, E, F, Pl. Support Category A, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing Digital policies. RSX-11M DESCRIPTION: RSX-11 M is a real-time disk-based operating system that provides event-driven multi-programming operation. Up to ten concurrent tasks may be run in 16K of memory, with any number in larger configurations. RSX-11 M is a program and file compatible subset of RSX-11 D. An ANSI standard FORTRAN IV compiler and runtime system is included. SOFTWARE COMPONENTS: Executive, MACRO assembler, task builder (linker and overlay builder), editor, on-line debugger, librarian, PIP file utility program; file verification, dump, and exchange programs; FORTRAN IV compiler and run-time system. MINIMUM HARDWARE REQUIRED • • • • Any PDP-11 processor (Except LSI-11, and PDP-11/03) One Console Terminal (from Terminals section) One Clock-Line frequency or Programmable One Bootstrap-System device and distribution medium device And (for RK05 DECpack distribution medium) • 16K words of memory • RK11 (one RK05 drive) • One of the following: One additional RK05 drive TC11 (one DECtape drive) TA11 (dual cassette tape drive) * Includes listings on microfiche. 52 RX11 TMA11/TM11 * TMA11 * TJU16/TWU16 * (one (one (one (one RX01 floppy disk drive) 9-track TU10 tape drive) 9-track TS03 tape drive) 9-track TU16 tape drive) Or (for Magnetic Tape distribution medium) • 24K words of memory • One Disk RK11 (one (one RPR11 (one RP11 (one RJ P04/RWP04 RK05) RPR02 drive) RP03 drive) RP04 drive) • One Magnetic tape drive TMA11/TM11 TMA11 TJU16/TWU16 (one 9-track TU10 drive) (one 9-track TS03 drive) (one TU16 drive) Ordering Information STANDARD OPTIONS QJ620-GQJ620-AQJ625-AQJ620-CQJ625-C- RSX-11 M Pre-delivery Documentation Kit (media: Z). Single-use license, binaries, key source module, support services, and documentation (media: C, D, E, N, V). Single-use license, binaries, key source modules, support services and documentation. This option is for RPR02, RP03, or RP04 disk-based systems (media: D). Single-use license, binaries, key source modules, no support services, and documentation (media: C, D, E, N, V). Single-use license, binaries, key source modules, no support services, and documentation. This option is for RPR02, RP03, or RP04 disk-based systems (media: D). UPDATE OPTIONS The following options are offered as Version 1 to Version 2 updates. QJ620-HQJ620-HQJ621-NQJ622-N- 9-Track Magnetic Tape Update Kit (media: D). RK05 DECpack Update Kit (media: E). Utility Source Updates (media: E). FORTRAN Compiler and Runtime System Source Updates (media: E). SOURCE AND LISTING OPTIONS QJ621-EQJ622-EQJ620-FQJ621-FQJ622-FQJ623-F- Utility Sources (media: D, E). FORTRAN IV Compiler and Runtime System Sources (media: D, E). Executive and I/O Drivers Listings (media: R). Utility Listings (media: R). FORTRAN IV Compiler and Runtime System Listings (media: R). All Listings (media: R). Additional Services After the first year, two extended software maintenance contracts are offered: Information Service This contract service provides the subscriber with monthly issues of the "RSX-11 M Software Dispatch" (system newsletter) and the Software Performance Reporting (SPR) service for a period of one year, starting with the date of subscription to the contract. Training Credits Three training credits are included with the supported Binary license. Support Category A; Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. • Note: Although the Magnetic tape drives will function in a 16K system, the recommended minimum is 24K words of memory. The REQUIRED minimum for Magnetic tape as the distribution medium is 24K. 53 Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing Digital Policies. Updates do not include installation or any other software service. Microfiche listings of updates are provided automatically, at no extra charge, to those customers who have purchased microfiche and are within the first year following installation or who are subscribers to the Standard Binary Program Update Service. RSX-11S DESCRIPTION: RSX-11 S is a memory based real-time operating system designed to operate in a PDP-11 processor with a minimum of 8K words of real memory. The system is not dependent upon any mass storage media for execution. RSX-11S is based on the RSX-11M Version 2 disk based operating system and is fully subset compatible with it. The I/O driver interface is identical. Device drivers written to execute under RSX-11 S without change. The opposite is also true. Further, any application program that executes under RSX-11S will execute under RSX-11M Version 2 or RSX-11 D Version 6 without change following a relink of the object program. As a memory based system, RSX-11S does not support a file system, non-resident tasks, checkpointing (rollin/ rollout) or program development. It provides a run time environment for execution of tasks on a memory based processor with a modest complement of peripherals. Program development and system generation for RSX-11S requires a host RSX-11 M Version 2 system. Tasks written in MACRO-11, FORTRAN IV or FORTRAN IV-PLUS must be assembled or compiled and subsequently linked on the host system and transported to the target RSX-11S system for execution. If tasks are written in FORTRAN, a minimum of 16K words of memory is required for the RSX-11S target system. Transportability of tasks between the RSX-11M host and the RSX-11S target is provided via the File Exchange Utility (FLX) on the host system and the On-Line Task Loader (OTL) on the target system. RSX-11 S requires, as a prerequisite, an RSX-11 M Version 2 operating system for host support and system generation. The software components contained in the RSX-11S distribution kit includes the following: Storage Components Monitor Console Routine-RSX-11 M Subset On-line Task Loader System Image Preservation Program File Control Services (FCS) for record devices (does not include directory support) MINIMUM HARDWARE REQUIRED Any PDP-11 Processor with 8K words of Memory including the LSI-11 and PDP-11/03 KW11-L or KW11-P Clock Hardware Bootstrap Loader One of the following load devices: TA 11 PR11 PC11 TC11 TM11/TMA11 TJU16/TWU16 RX11 Cassette Tape Paper Tape Reader Paper Tape Reader/Punch DECtape Magtape (TU10 and TS03 drives) Magtape Floppy Disk STANDARD OPTIONS QJ640-AQJ640-C- Single-use license, binaries, sources, documentation, support services (media: C, D, E, N, V). Single-use license, binaries, sources, documentation, no support services (media: C, D, E, N. V). Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL Policies. 54 COMMUNICATIONS AND NETWORK OPTIONS DECNET/IAS DESCRIPTION: DECNET/IAS extends the capabilities of the lAS operating system by enabling lAS systems to be interconnected with other DECNET systems. DECNET/IAS can be used as a component of distributed networks, resource sharing networks, and communications networks. MINIMUM HARDWARE REQUIRED: Any valid lAS system configuration with: • 8K words additional dedicated memory • one or more of the following communications devices: DL 11-C asynchronous interface, 20mA current loop DL 11-E asynchronous interface with modem control DV11 synchronous multiplexor DU11 low-speed synchronous interface DP11 low-speed synchronous interface DQ11-DA, NPR synchronous interface DA11-B UNIBUS link, local cable DA11-AL UNIBUS link, long cable • no more than a system total of 124K words of memory if any of the following communication devices are included: DV11 DQ11-DA DA11-B DA11-AL PREREQUISITE SOFTWARE: lAS operating system, Version 1.1 or later. Support Category B-Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion of DIGITAL's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by DIGITAL. Standard options with no support services are only available after the purchase of one supported license and after either an OEM Agreement or End-User Waiver of Support Agreement is in effect. When a software license is ordered without support services, the category of support applicable to such software is Category C. If a network includes any DECNET software package with Category C support, then the support classification for all DECNET software in that network reverts to Category C. Source and/or listing options are only available after the purchase of at least one supported binary license and after a source license agreement is in effect. The following key (D, E, F, R, Z) represents the distribution media for the product and must be specified at the end of the "Q" number, i.e., QR680-AD binaries on 9-track magnetic tape. = 9-track Magnetic Tape (TU10) = RK Disk (DEC pack) D E F R= Z = =7-track = Magnetic Tape Microfiche No hardware dependency STANDARD OPTIONS QR680-AQR680-C- Single-use license, binaries, some source modules, documentation, support services (media: D, E, F) Single-use license, binaries, some source modules, documentation, no support services (media: D, E, F) SOURCE/LISTING OPTIONS QR680-EQR680-F- All sources (media: D, E, F) Listings (media: R) 55 MISCELLANEOUS OPTIONS QR680-G- Pre-delivery kit (media: Z) Additional Services QR680-S- Installation Services (media: Z) DECNET-11D DESCRIPTION: DECNET-11 D extends the capabilities of the RSX-11 D operating system by enabling RSX-11 D systems to be interconnected with other DECNET systems. DECNET-11 D can be used as a component of dist'ributed networks, resource sharing networks, and communications networks. MINIMUM HARDWARE REQUIRED Any valid RSX-11D system configuration with: • 8K words additional dedicated memory • no more than a system total of 124K words of memory • one or more of the following communications devices: DL 11-C asynchronous interface, 20mA current loop DL 11-E asynchronous interface with modern control DV11 synchronous multiplexor DU11 low-speed synchronous interface DP11 low-speed synchronous interface DQ11-DA, NPR synchronous interface DA11-B UNIBUS link, local cable DA11-AL UNIBUS link, long cable PREREQUISITE SOFTWARE: RSX-11D operating system. Version 6B or later. Support Category B, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. Ordering Information If a network includes any DECNET software package with Category C support, then the support classification for all DECNET software in that network reverts to Category C. Source and/or listing options are only available after the purchase of at least one supported binary license and after a source license agreement is in effect. The following key (D, E, F, R, Z) represents the distribution media for the product and must be specified at the end of the "Q" number, i.e., QP680-AD binaries on 9-track magnetic tape. = D E F R Z = 9-track MagnetiC Tape (TU10) = RK Disk (DECpack) = 7-track Magnetic Tape = Microfiche = No hardware dependency STANDARD OPTIONS QP680-AQP680-C- Single-use license, binaries, some source modules, documentation, support services (media: D, E, F) Single-use license, binaries, some source modules, documentation, no support services (media: D, E, F) SOURCE/LISTING OPTIONS QP680-EQP680-F- All sources (media: D, E, F) Listings (media: R) MISCELLANEOUS OPTIONS QP680-G- Pre-delivery kit (media: Z) Additional Services QP68D-SQP680-3- Installation Services (media: Z) Standard Binary Program Update Service (media: D, E, F) 56 DECNET-11M DESCRIPTION: DECNET-11M extends the capabilities of the RSX-11M operating system by enabling RSX-11M systems to be interconnected with other DECNET systems. DECNET-11M can be used as a component of distributed networks. MINIMUM HARDWARE REQUIRED Any valid RSX-11 M system configuration with: • 5K words additional dedicated memory • one or more of the following communications devices: DL 11-C asynchronous interface. 20mA current loop DL 11-E asynchronous interface with modem control DU11 low-speed synchronous interface DP11 low-speed synchronous interface DQ11-DA NPR synchronous interface DA11-B UNIBUS link, local cable DA11-AL UNIBUS link, long cable PREREQUISITE SOFTWARE: RSX-11 M operating system. Version 2 Source and/or listing options are only available after the purchase of at least one supported binary license and after a source license agreement is in effect. The following key (D, E, F, R, Z) represents the distribution media for the product and must be specified at the end of the "Q" number, i.e., QJ680-AD binaries on 9-track magnetic tape. = D E F R = 9-track Magnetic Tape = RK Disk (DECpack) = 7-track Magnetic Tape = Microfiche Z = No hardware dependency STANDARD OPTIONS QJ680-AQJ680-C- Single-use license, binaries, documentation, support services (media: D, E, F) Single-use license, binaries, documentation, no support services (media: D, E, F) SOURCE/LISTING OPTIONS QJ680-EQJ680-F- All sources (media: D, E, F) Listings (media: R) UPDATE OPTIONS Users of DECNET-11 M, Version 1, whose warranty has expired, or whose Standard Program Update Service has expired, may order under license the following software update at the then current charge for such update. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ680-H- Binaries, documentation (media: D, E, F) Users of DECNET-11 M, Version 1, whose license does not include free updates under warranty, and whose warranty has not expired, may order under license the following software update for the then current media charge. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ680-W- Binaries, documentation (media: D, E, F) MISCELLANEOUS OPTIONS QJ680-G- Pre-delivery kit (media: Z) Additional Services QJ680-S- Installation Services (megia: Z) Support Category B, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. 57 DECNET-11S DESCRIPTION: DECNET-11S extends the capabilities of the RSX-11S operating system by enabling RSX-11S systems to be intreconnected with other DECNET systems. DECNET-11S can be used as a component of distributed networks, resource sharing networks, and communications networks. MINIMUM HARDWARE REQUIRED Any valid RSX-11S system configuration with: • 8K words additional dedicated memory • PDP-11/04 - 11170 CPU • one or more of the following communications devices: DL 11-C asynchronous interface, 20mA current loop DL 11-E asynchronous interface with modem control DU11 low-speed synchronous interface DP11 low-speed synchronous interface DQ11-DA NPR synchronous interface DA11-B UNIBUS link, local cable DA11-AL UNIBUS link, long cable PREREQUISITE SOFTWARE: RSX-11 S operating system, Version 1. Source and/or listing options are only available after the purchase of at least one supported binary license and after a source license agreement is in effect. The following key (D, E, F, R, Z) represents the distribution media for the product and must be specified at the end binaries on 9-track magnetic tape. of the "Q" number, i.e., QJ690-AD = D E F R Z = 9-track Magnetic Tape = RK Disk (DECpack) = 7-track Magnetic Tape = Microfiche = No hardware dependency STANDARD OPTIONS QJ690-AQJ690-C- Single-use license, binaries, documentation, support services (media: D, E, F) Single-use, license, binaries, documentation, no support services (media: D, E, F) SOURCE/LISTING OPTIONS QJ690-F- Listings (media: R) UPDATE OPTIONS Users of DECNET-11S, Version 1, whose warranty has expired, or whose Standard Program Update Service has expired, may order under license the following software update at the then current charge for such update. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ690-H- Binaries, documentation (media: D, E, F) Users of DECNET-11s, Version 1, whose license does not include free updates under warranty, and whose warranty has not expired, may order under license the following software update for the then current media charge. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ690-W- Binaries, documentation (media: D, E, F) MISCELLANEOUS OPTIONS QJ690-G- Pre-delivery kit (media: Z) Additional Services QJ960-S- Installation Services (media: Z) Support Category B, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. 58 RSX-11 0/2780 DESCRIPTION: The RSX-11 D/2780 runs as a privileged task under a suitably equipped RSX-11 D system (Version 6A or later), providing emulation of an IBM 2780 remote batch terminal. It will support transmission and reception from/to card reader and line printer, and/or mass storage devices, such as disk and magnetic tape. MINIMUM HARDWARE REQUIRED: Any valid RSX-11D system with at least 56K words of memory DP11 or DU11 Synchronous Line Interface KG11-A Communications Arithmetic Element. PREREQUISITE SOFTWARE: RSX-11D Version 6A or later is required. (Not included in the RSX-11D/2780 license.) Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion of DIGITAL's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by DIGITAL. The following key represents the distribution media available for the product and must be specified at end of "Q" number, i.e., QPD70-AC binaries on DECtape. F-7-track Magtape C-DECtape R-Microfiche D-9-track Magtape (TU10) Z-No hardware dependency E-RK Disk (DECpack) = STANDARD OPTIONS QPD70-A- Single-use license; binaries; documentation, support services (RSX-11 0 not included) (media: C, 0, E, F). QPD70-D- Single-use license; documentation, no support services (media: Z) SOURCE/LISTING OPTIONS QPD70-EQPD70-F- RSX-11 0/2780 Sources* (media: C, 0, E, F). RSX-11 0/2780 Listings* on Michofiche (media: R). UPDATE OPTIONS QPD70-H- Binaries, documentation, no support services (media: C, 0, E, F). Support Category A; Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, update policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. RSX-11M/2780 DESCRIPTION: The RSX-11 M/2780 runs as a privileged task under a suitably equipped RSX-11 M system (Version 1 or later), providing emulation of an IBM 2780 remote batch terminal. It will support transmission and reception from/to card reader and line printer, and/or mass storage devices, such as disk and magnetic tape. MINIMUM HARDWARE REQUIRED: Any valid RSX-11M system with at least 16K words of memory DP11 or DU11 Synchronous Line Interface KG11 CRC/LRC Arithmetic Unit PREREQUISITE SOFTWARE: RSX-11 M Version 1 or later is required. (Not included in the license.) Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion of DIGITAL's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by DIGITAL. The following key represents the distribution media available for the product and must be specified at end of "Q" number, i.e., QJD68-AC binaries on DECtape. = C-DECtape D-9-track magtape (TU10) E-RK disk (DECpack) F-7-track magtape N-Cassette (TU60) R-Microfiche Z-No hardware dependency STANDARD OPTIONS QJD68-A- Single-use license; binaries, documentation, support services (RSX-11 M not included) (media: C, 0, QJD68-D- Single-use license; documentation, no support services (media: Z). E, F, N). 59 SOURCE/LISTING OPTIONS QJD68-EQJD68-F- RSX-11 M/2780 Sources* (media: C, D, E, F, N). RSX-11 M/2780 Listings* on Microfiche (media: R). Support Category A; Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, update policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. RT-11/2780 DESCRIPTION: RT-11/2780 (COS-350/2780) provides emulation of an IBM 2780 remote batch terminal. It runs under the RT-11 Foreground/Background monitor on a suitably equipped RT-11 (version 2B or later) or COS-350 system. MINIMUM HARDWARE REQUIRED: Any valid RT-11 Foreground/Background system configuration (except LSI-11 based systems) with: • • • • • • at least 16K words of memory for 2780 operation in the background at least 24K words of memory for 2780 operation in the foreground KW11-L Line Frequency Clock a disk device KG11-A Communications Arithmetic Element DP11, DU11, or DUP11 Synchronous Line Interface (NOTE: The line interface must have a higher priority than the RX11 floppy disk, should one be present on the system) OR, Anyone of the following DEC Datasystem configurations: • DS352 RX11 Floppy-based system • DS354 RK11 DECpack-based system • DS356 RPR11 Disk pack-based system with: • at least 32K bytes of memory for 2780 operation in the background • at least 48K bytes of memory for 2780 operation in the foreground A DU11 Synchronous Line interface and KG11 Communications Arithmetic Element are included in the COS350/2780 package. (NOTE: The line interface must have a higher priority than the RX11 floppy disk on the DS352 and DS356 systems.) PREREQUISITE SOFTWARE: RT-11 operating system, Version 2B or later OR, COS-350 System Software, Version 1 or later Ordering Information Source and/or listing options are only available after the purchase of at least one supported binary license and after a source license agreement is in effect. The following key (C, D, E, N, R, Y, Z) represents the distribution media for the product and must be specified at the end of the "Q" or "DS" number, i.e., QJD63-AD = binaries on 9-track magnetic tape. C = D = E = F = R= Y = Z = DECtape 9-track Magnetic Tape RK Disk (DECpack) 7-track Magnetic Tape Microfiche Floppy Disk No hardware dependency STANDARD OPTIONS QJD63-A- Single-use license, binaries, documentation, support services (RT-11 not included) (media: C, D, E, QJD63-D- Single-use license only, no support services (media: Z) F, Y) RESTRICTED STANDARD OPTIONS DS3CC-A- Single-use license, binaries, documentation, communications subsystem, support services (media: E, Y) for COS-350 systems only DS3CC-D- Single-use license only, with communications subsystems, no support services (media: Z) for COS-350 systems 01 ny 60 SOURCE/LISTING OPTIONS QJD63-EQJD63~F~ All sources (RT-11 not included) (media: C, D, E, F, Y) Listings (RT-11 not inc!uded) (media: R) Support Category A, for initial installation, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Subsequent licenses can be purchased with Category C support. Sources have Category C support. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to the then prevailing DIGITAL policies. RSTS!E-2780 DESCRIPTION: The RSTS/E-2780 Emulator runs as a user job under a suitably equipped RSTS/E or CTS-500/E system, providing emulation of an IBM 2780 Remote Batch Terminal. It will support transmission and reception from/to card reader and line printer, and/or mass storage devices, such as disk and magnetic tape. MINIMUM HARDWARE REQUIRED: • Any valid RSTS/E (CTS-500/E) configuration with sufficient memory for the expected number of users, plus 8K words of memory to accommodate the Emulator. • DP11, DU11, or DUP11 Synchronous Line Interface (DUP11 supported by modifying five locations in DU-11 version of 2780 software during installation) • KG11-A Communications Arithmetic Element PREREQUISITE SOFTWARE: One of the following operating systems: • RSTS/E Operating System, Version 6A • CTS-500/E Operating System, Version 2 Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion 'of DIGITAL's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by DIGITAL. Standard options with no support services are only available after the purchase of one supported license and after either an OEM Agreement or End-User Waiver of Support Agreement is in effect. When a software license is ordered without support services, the category of support applicable to such software is Category C. Source and/or listing options are only available after the purchase of at least one supported license and after a source license agreement is in effect. The following key (C, D, E, F, R, Y, Z) represents the distribution media for the product and must be specified at the end of the "Q" number, i.e., QPD10-AD binaries on 9-track magnetic tape. C D E F R Y Z = DECtape = 9-track MagnetiC Tape = RK Disk (DECpack) = 7-track Magnetic Tape = Microfiche = Flexible Diskette = No hardware dependency = STANDARD OPTIONS QPD10-AQDP10-D- Single-use license, binaries, documentation, support services (media: C, D, E, F) Single-use license, binaries, documentation, no support services (media: Z) Support Category A, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. 61 DATA SERVICES OPTIONS RMS-11K DESCRIPTION: RMS-11 K provides keyed access record management services for RSTS/E, RSX-11 M and lAS operating systems. As an extension to the basic RMS-11 sequential and relative file organizations, RMS-11K enables multi-key access via indexes. RMS-11 K run time services are available via COBOL V3, MACRO-11, and BASICPLUS-2. Utilities are provided for define, copy, convert, back-up, restore, and display (file definition) functions. SOFTWARE COMPONENTS: RMS-11 K run time services, and utilities as defined above. MINIMUM HARDWARE: Any valid PDP-11 configuration with memory management which supports the base operating system (RSTS/E, RSX-11 M, or lAS) and optional language processors, plus 4K words (overlaid) or 12K words (not overlaid) for RMS-11 K. PREREQUISITE SOFTWARE: RSTS/E V6B, or RSX-11 M V3.0, or lAS V2.0 or later version. OPTIONAL SOFTWARE: COBOL V3.0, BASIC-PLUS-2, MACRO-11. Ordering Information STANDARD OPTIONS FOR RSTS/E SYSTEMS: QP900-AQP900-C- Single-use license, binaries, documentation, support services (media: C, D, E, F, P) Single-use license, binaries, documentation, no support services (media: C, D, E, F, P) FOR RSX-11M SYSTEMS: QP901-AQP901-C- Single-use license, binaries, documentation, support services (media: C, D, E, N, Y) Single-use license, binaries, documentation, no support services (media: C, D, E, N, Y) FOR lAS SYSTEMS: QP902-AQP902-C- Single-use license, binaries, documentation, support services (media: D, E) Single-use license, binaries, documentation, no support services (media: D, E) Support Category A, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. DBMS-11 DESCRIPTION: DBMS-11 is a generalized data base management system for the high end PDP-11 systems. DBMS-11 is a CODASYL implementation, providing comprehensive data base functionality for PDP-11 COBOL programs and other languages which support a CALL facility, such as FORTRAN IV/lAS, FORTRAN-lV-PLUS, BASIC-PLUS-2, and MACRO-11. DBMS-11 provides separate language facilities for the description of data and the access or manipulation of data. This separation of data description provides for the integration of all data and data descriptions and relations into a data base which is common to all application programs sharing the data. SOFTWARE COMPONENTS: Data Description Language (DDL, both SCHEMA and SUB-SCHEMA), COBOL Data Manipulation Language processor (DML), Data Base Utilities, and run-time systems. MINIMUM HARDWARE: PDP-11!70 with 128K words, TWU16 magnetic tape controller and transport, RP04, 5 or 6 disk, and a line printer. PREREQUISITE SOFTWARE: lAS V1.1 or later version. Ordering Information STANDARD OPTIONS QP375-AQP375-C- Single-use license, binaries, documentation, support services (media: D). Single-use license, binaries, documentation, no support services (media: D). Support Category A, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. 63 LANGUAGES OPTIONS APL-11/RSTS/E DESCRIPTION: APL-11 is a mathematically structured programming language featuring many operators whose actions generalize to arrays of arbitrary order. Some of the APL-11 features include Chaining, Immediate Mode Editing, dynamically variable user workspace, symbol table size, and APL-10 compatibility. SOFTWARE COMPONENTS: APL-11 Interpreter. MINIMUM HARDWARE: A valid RSTS/E configuration, with additional memory of at least 22K words. PREREQUISITE SOFTWARE: RSTS/E (QR430). QJ906-AC QJ906-AD QJ906-AE QJ906-AF QJ906-AP QJ906-AY DECtape Magtape (9-tr) RK Disk (DECpack) Magtape (7-tr) Magtape (9-tr) "MASSBUS only" Floppy Disk APL-11/RT-11 DESCRIPTION: APL-11 is a mathematically structured programming language featuring many operators whose actions generalize to arrays of arbitrary order. Some of the APL-11 features include Chaining, Immediate Mode Editing, dynamically variable user workspace, symbol table size, and APL-10 compatibility. SOFTWARE COMPONENTS: APL-11 Interpreter MINIMUM HARDWARE: A valid RT-11 configuration, with additional memory of at least 22K words. PREREQUISITE SOFTWARE: RT-11 (Q5003). QJ907-AC QJ907-AD QJ907-AE QJ907-AF QJ907-AP QJ907-AY DECtape Magtape (9-tr) RK Disk (DECpack) Magtape (7-tr) Magtape (9-tr) "MASSBUS only" Floppy Disk BASIC-11 Version 2.0/1AS DESCRIPTION: BASIC-11 Version 2.0 is a DEC standard BASIC implemented as an incremental interactive Interpreter and compatible with PDP-11 Basic Language Processors for BASIC/PTS, BASIC/CAPS, and BASIC/RT-11. Features include strings, chaining, overlay support, virtual memory (direct access files, and a "CALL" statement for assembly language routine interfacing. SOFTWARE COMPONENTS: BASIC-11 Version 2.0 Language Processor. MINIMUM HARDWARE: A valid lAS configuration. PREREQUISITE SOFTWARE: lAS (QP210). QP240-AD QP240-AE QP240-AF QP240-CD QP240-CE QP240-CF Magtape (9-tr) DECpack Magtape (7-tr) Magtape (6-tr) DECpack Magtape (7-tr) Additional Systems License without Services. BASIC-11 Version 2.0/RSX-11M DESCRIPTION: BASIC-11 Version 2.0 is a DEC standard BASIC implemented as an incremental interactive Interpreter and compatible with PDP-11 BASIC Language Processors for BASIC/PTS, BASIC/CAPS, and BASIC/RT-11. Features include strings, chaining, overlay support, virtual memory (direct access files, and a "CALL" statement for assembly language routine interfacing. SOFTWARE COMPONENTS: BASIC-11 Version 2.0 Language Processor. MINIMUM HARDWARE: A valid RSX-11M configuration. PREREQUISITE SOFTWARE: RSX-11 M (QJ620). QP240-AD QP240-AE QP240-AF QP240-CD QP240-CE QP240-CF Magtape (9-tr) DECpack Magtape (7-tr) Magtape (6-tr) DECpack Magtape (7-tr) Additional Systems License without Services. 65 BASIC/CAPS DESCRIPTION: BASIC/CAPS is a single user Dartmouth standard BASIC language processor utilized from DECassettes. It is an extension of BASIC-PTS including all BASIC/PTS features with chaining capability and standard DECassette file support. SOFTWARE COMPONENTS: BASIC/CAPS language processor. MINIMUM HARDWARE: PDP-11, BK memory, console terminal, and TA11 dual DECassette system. PREREQUISITE SOFTWARE: CAPS-11 (QJ1BO). Ordering Information QJ910-AN- Single-user license*; binaries on Cassette, manual QJ910-EN- Sources on Cassette; (requires license*) QJ910-FZ- Listing; (requires license*) Support Category B, one year Software Performance Reporting (SPR) Service. Update Policy Any future updates will be available at the prevailing handling and service charges. BASIC/RT-11 DESCRIPTION: BASIC/RT-11 is a single-user Dartmouth standard BASIC language processor implemented as an incremental compiler and is an extension of BASIC/PTS and BASIC/CAPS. It includes all of the extended features of BASIC/PTS and BASIC/CAPS, as well as a direct access file capability. SOFTWARE COMPONENTS: BASIC/RT-11 language processor. MINIMUM HARDWARE: Any RT-11 system with BK of memory (16K of memory for strings support). PREREQUISITE SOFTWARE: RT-11 (QJ003). Ordering Information This software is furnished under a license for use on a single CPU and can be copied and modified (with inclusion of DIGITAL's copyright notice) only for use on such CPU, except as may otherwise be provided in writing by DIGITAL. Standard options with no support services are only available after the purchase of one supported license and after either an OEM Agreement or End-User Waiver of Support Agreement is in effect. When a software license is ordered without support services, the category of support applicable to such software is Category C. Source and/or listing options are only available after the purchase of at least one supported binary license and after a source license agreement is in effect. The following key (B, C, D, E, F, N, R, Y) represents the distribution media for the product and must be specified at the end of the "Q" number, i.e., QJ920-AD binaries on 9-track magnetic tape. B Paper Tape C DECtape D = 9-track Magnetic Tape RK Disk (DECpack) E F = 7-track Magnetic Tape N = Cassette R = Microfiche Y Floppy Disk = = = = = STANDARD OPTIONS QJ920-AQJ920-C- Single-use license, binaries, documentation, support services (media: B, C, D, E, F, N, Y) Single-use license, binaries, documentation, no support services (media: B, C, D, E, F, N, Y) SOURCE/LISTING OPTIONS QJ920-EQJ920-F- All sources (media: C. E. Y) Listings (media: R) UPDATE OPTIONS Users of BASIC/RT-11 whose license does not include free updates under warranty, whose warranty has expired, or whose Standard Binary Program Update Service has expired, may purchase the following. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ920-HQJ920-N- Binaries, documentation (media: B, C, D, E, F, N, Y) Source update (media: C, E, Y) 66 Support Category B, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. BASIC/PTS DESCRIPTION: BASIC/PTS is a single user Dartmouth standard BASIC language processor, implemented as an incremental compiler to provide exceptional execution speed while retaining the interactive nature of BASIC. Features include optional string capability and a "CALL" statement for easy interface of assembly language routines. SOFTWARE COMPONENTS: BASIC/PTS language processor. MINIMUM HARDWARE: PDP-11, 8K memory teletypewriter with paper tape I/O. PREREQUISITE SOFTWARE: None. Ordering Information QJ900-AB- Single-user license*; binaries on paper tape, manual Customers must first purchase a BASIC/PTS binary package, then may order: QJ900-EB- Sources on paper tape (requires Iicense*) QJ900-FZ- Listings on paper (requires license*) SUPPORT CATEGORY B-One year Software Performance Reporting (SPR) Service. UPDATE POLICY Any future updates will be available at the prevailing handling and service charges. BASIC-11 Version 2.0/RSX-11D DESCRIPTION: BASIC-11 Version 2.0 is a DEC standard BASIC implemented as an incremental interactive interpreter and compatible with PDP-11 BASIC language processors for BASIC/PTS, BASIC/CAPS, and BASIC/RT-11. Features include strings, chaining, overlay support, virtual memory (direct access) files, and a "CALL" statement for assembly language routine interfacing. SOFTWARE COMPONENTS: BASIC-11 Version 2.0 language processor. MINIMUM HARDWARE: A valid RSX-11D configuration. PREREQUISITE SOFTWARE: RSX-11D (QJ580). QP240-AD QP240-AE QP240-AF QP240-CD QP240-CE QP240-CF Magtape (9-tr) DECpack Magtape (7-tr) Magtape (6-tr) DECpack Magtape (7-tr) Additional System License without Services BAS I C-PLU S-2/RSTS/E DESCRIPTION: BASIC-Plus-2 is a superset of the RSTS/E BASIC-Plus, BASIC-11/IAS-RSX, BASIC/RT-11 and Dartmouth BASIC languages. Extended features over RSTS/E BASIC-Plus include, common, ISAM (Indexed Sequential Access Method), Record I/O, interactive debugging, block mode terminal support, and a "CALL" statement. SOFTWARE COMPONENTS: BASIC-Plus-2 language processor. MINIMUM HARDWARE: A valid RSTS/E configuration. PREREQUISITE SOFTWARE: RSTS/E (QR430). QJ916-AD QJ916-AE QJ916-AF QJ916-CD QJ916-CE QJ916-CF Magtape (9-tr) DECpack Magtape (7-tr) Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Services BASIC-PLUS-2/IAS DESCRIPTION: BASIC-Plus-2 is a superset of the RSTS/E BASIC-Plus, BASIC-11/IAS-RSX, BASIC/RT-11 and Dartmouth BASIC languages. Extended features over RSTS/E BASIC-Plus include, common, ISAM (Indexed Sequential Access Method), record I/O, interactive debugging, block mode terminal support, and a "CALL" statement. 67 SOFTWARE COMPONENTS: BASIC-Plus-2 language processor. MINIMUM HARDWARE: A valid lAS configuration. PREREQUISITE SOFTWARE: lAS (QP210). QJ916-AD QJ916-AE QJ916-AF QJ916-CD QJ916-CE QJ916-CF Magtape (9-tr) DECpack Magtape (7-tr) Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Services BASIC-PLUS-2!RSX-11 M DESCRIPTION: BASIC-Plus-2 is a superset of the RSTS/E BASIC-Plus, BASIC-11/IAS-RSX, BASIC/RT-11 and Dartmouth BASIC languages. Extended features over RSTS/E BASIC-Plus include, common, ISAM (Indexed Sequential Access Method), record I/O, interactive debugging, block mode terminal support, and a "CALL" statement. SOFTWARE COMPONENTS: BASIC-Plus-2 language processor. MINIMUM HARDWARE: A valid RSX-11M configuration. PREREQUISITE SOFTWARE: RSX-11M (QJ620). QJ916-AD QJ916-AE QJ916-AF QJ916-CD QJ916-CE QJ916-CF Magtape (9-tr) DECpack Magtape (7-tr) Magtape (9-tr) DECpack Magtape (7 -tr) Additional System License without Services COBOL-11!RSTS!E DESCRIPTION: COBOL-11 is an ANSI-74 language processor, and is a well defined language for commercial applications. Compilation and execution of COBOL programs on the PDP-11 are characterized by a high rate of throughput and efficient memory utilization. The COBOL compiler accepts source input from cards, consoles, disks and library files. SOFTWARE COMPONENTS: COBOL-11 Compiler, COBRG (Cobol Report Generator), Sort-11. MINIMUM HARDWARE: A valid RSTS/E configuration. PREREQUISITE SOFTWARE: RSTS/E (QR430). QP010-AC QP010-AD QP010-AF QP010-AE QP010-CC QP010-CD QP010-CE QP010-CF DECtape Magtape (9-tr) Magtape (7-tr) DECpack DECtape Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Support COBOL-11!IAS DESCRIPTION: COBOL-11 is an ANSI-74 language processor, and is a well defined language for commercial applications. Compilation and execution of COBOL programs on the PDP-11 are characterized by a high rate of throughput and efficient memory utilization. The COBOL compiler accepts source input from cards, consoles, disks and library files. SOFTWARE COMPONENTS: COBOL-11 Compiler, COBRG (Cobol Report Generator), Sort-11. MINIMUM HARDWARE: A valid lAS configuration. PREREQUISITE SOFTWARE: lAS (QP210). QP010-AC QP010-AD QP010-AF QP010-AE QP010-CC QP010-CD QP010-CE QP010-CF DECtape Magtape (9-tr) Magtape (7-tr) DECpack DECtape Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Support 68 COBOL-11/RSX-11 D DESCRIPTION: COBOL-11 is an ANSI-74 language processor, and is a well defined language for commercial applications. Compilation and AXAr.lJtion of r.OROI programs on the POP-11 are characterized by a high rate of throughput and efficient memory utilization. The COBOL compiler accepts source input from cards, consoles, disks and library files. SOFTWARE COMPONENTS: COBOL-11 Compiler, COBRG (Cobol Report Generator), Sort-11. MINIMUM HARDWARE: A valid RSX-11 D configuration. PREREQUISITE SOFTWARE: RSX-11 D (QJ580). QP010-AC QP010-AD QP010-AF QP010-AE QP010-CC QP010-CD QP010-CE QP010-CF DECtape Magtape (9-tr) Magtape (7-tr) DECpack DECtape Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Support FOCAL/PTS DESCRIPTION: FOCAL/PTS is an easy-to-Iearn, interactive computer language ideal for scientists and students who need simplicity as well as power. It allows calculations to be performed immediately in response to a user command; or the stringing of commands to form a program. Double preCision arithmetic is supported. SOFTWARE COMPONENTS: FOCAL/PTS language processor. MINIMUM HARDWARE: PDP-11, 4K memory, teletypewriter with paper tape I/O. PREREQUISITE SOFTWARE: None. Ordering Information QJ006-AB- Single use license; binaries on paper tape and manual QJ006-EC- Source on RT-11 format DECtape (requires license) QJ006-FZ- Listings on paper (requires license) SUPPORT CATEGORY B, one year Software Performance Reporting (SPR) Service. UPDATE POLICY Any future updates will be available at the prevailing handling and service charges. FORTRAN/RT-11 DESCRIPTION: FORTRAN/RT-11 is an extended superset of the ANSI standard FORTRAN IV language. Its features include: fast compile time, optimized output for fast execution, very efficient code generation, direct access 1/0, and plotting support (LVII). The compiler and run time system can be effectively utilized in a minimum of only 8K of memory. SOFTWARE COMPONENTS: FORTRAN/RT-11 Compiler and Run-Time System. MINIMUM HARDWARE: Any RT-11 system with 16K of memory for strings support. PREREQUISITE SOFTWARE: RT-11 (QJ003). Source and/or listing options are only available after the purchase of at least one supported license and after a source license agreement is in effect. STANDARD OPTIONS QJ980-A- Single-use license, binaries, documentation, support services (media: C, D, E, V). SOURCE/LISTING OPTIONS QJ980-EQJ980-F- All sources (media: C, D, E, V). Listings (media: R). UPDATE OPTIONS Users of FORTRAN/RT-11 whose warranty has expired, or whose Standard Program Update Service has expired, may purchase the following. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ980-HQJ980-N- Binaries, documentation (media: C, D, E, V). Source update (media: C, D, E, V). 69 Users of FORTRAN/RT-11 whose license does not include free updates under warranty, and whose warranty has not expired, may purchase the following. The update is distributed in source or binary form on the appropriate medium and includes no installation or other services unless specifically stated otherwise. QJ980-W- Binaries, documentation (media: C, D, E, V). Support Category B, Software Support will be provided as listed in the Software Support Categories Addendum to this SPD. Update Policy During the first year, Update Policy shall be in accordance with the Software Support Categories Addendum to this SPD. After the first year, updates, if any, will be made available according to then prevailing DIGITAL policies. FORTRAN IV/RT-11 EXTENSIONS DESCRIPTION: The FORTRAN/RT-11 extensions consist of: Graphic subroutines for the VT-11 AN VS60, VT55. A separately available package supports the LVII plotter. SOFTWARE COMPONENTS: FORTRAN/RT-11 extensions. MINIMUM HARDWARE: Any valid RT-11 configuration with at least 16K words of memory. OPTIONAL SUPPORTED HARDWARE: VT11A, VS60, VT55, LPS-11, AR11, DR11-K. PREREQUISITE SOFTWARE: RT-11 (QJ003). QJ980-AC QJ980-AD QJ980-AE QJ980-AR QJ980-AY DECtape Magtape (9-tr) DECpack Microfiche Floppy Disk ALL SOURCES QJ980-EC QJ980-ED QJ980-EE QJ980-EY DECtape Magtape (9-tr) DECpack Floppy Disk LISTINGS QJ980-FR Microfiche FORTRAN IV-PLUS/RSX-11D DESCRIPTION: FORTRAN IV-Plus is a superset of FORTRAN IV. FORTRAN IV-Plus conforms to ANSI-66 specifications with extensions. FORTRAN IV-Plus provides additional features over FORTRAN-IV, i.e., entry, include, parameter, open, close, and program statements. Integer 4 (32-Bit) data type removal of invariant do loops etc. SOFTWARE COMPONENTS: FORTRAN IV Plus Compiler. MINIMUM HARDWARE: Any valid RSX-11 D configuration. PREREQUISITE SOFTWARE: RSX-11 D (QJ580). QP100-AD QP100-AE Magtape (9-tr) TU10 DECpack SOURCES (OTS) QP101-ED QP101-EE Magtape (9-tr) TU10 DECpack LISTINGS (OTS) QP101-FR Microfiche FORTRAN IV-PLUS/lAS DESCRIPTION: FORTRAN IV-Plus is a superset of FORTRAN IV. FORTRAN IV-Plus conforms to ANSI-66 specifications with extensions. FORTRAN IV-Plus provides additional features over FORTRAN IV, i.e., entry, include, parameter, open, close, and program statements. Integer 4 (32-Bit) data type removal of invariant do loops etc. SOFTWARE COMPONENTS: FORTRAN IV-Plus Compiler. MINIMUM HARDWARE: Any valid lAS configuration. 70 PREREQUISITE SOFTWARE: lAS (QP210). QP100-AE QP100-AD Magtape (9-tr) TU10 DECpack SOURCES (OTS) QP101-ED QP101-EE Magtape (9-tr) TU10 DECpack LISTINGS (OTS) QP101-FR Microfiche FORTRAN IV-PLUS/RSX-11M DESCRIPTION: FORTRAN IV-Plus is a superset of FORTRAN IV. FORTRAN IV-Plus conforms to ANSI-66 specifications with extensions. FORTRAN IV-Plus provides additional features over FORTRAN IV, i.e., entry, include, parameter, open, close, and program statements. Integer 4 (32-8it) data type removal of invariant do loops etc. SOFTWARE COMPONENTS: FORTRAN IV-Plus Compiler. MINIMUM HARDWARE: Any valid RSX-11M configuration. PREREQUISITE SOFTWARE: RSX-11M (QJ620). QP100-AD QP100-EA Magtape (9-tr) TU10 DECpack SOURCES (OTS) QP101-ED QP101-EE Magtape (9-tr) TU10 DECpack LISTINGS (OTS) QP101-FR Microfiche FO RTRAN IVliAS DESCRIPTION: FORTRAN IV/lAS is an extended implementation of ANSI-66 FORTRAN. The following extensions are implemented in the language: • • • • • Encode and decode statements Print, type and accept I/O statements Optimized arithmetic and logical "if" statements Common subexpression elimination Overlay support for programs and data SOFTWARE COMPONENTS: FORTRAN IV Compiler. MINIMUM HARDWARE: Any valid lAS configuration. PREREQUISITE SOFTWARE: lAS (QP210). QP230-AC QP230-AD QP230-AE QP230-AF QP230-CC QP230-CD QP230-CE QP230-CF DECtape Magtape (9-tr) DECpack Magtape (7-tr) DECtape Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Support FORTRAN IV/RSX-11M DESCRIPTION: FORTRAN IV/RSX-11M is an extended implementation of ANSI-66 FORTRAN. The following extensions are implemented in the language: • • • • • Encode and decode statements Print, type and accept I/O statements Optimized arithmetic and logical "if" statements Common subexpression elimination Overlay support for programs and data SOFTWARE COMPONENTS: FORTRAN IV Compiler. MINIMUM HARDWARE: Any valid RSX-11M configuration. 71 PREREQUISITE SOFTWARE: RSX-11 M (QJ620). QP230-AC QP230-AD QP230-AE QP230-AF QP230-CC QP230-CD QP230-CE QP230-CF DECtape Magtape (9-tr) DECpack Magtape (7-tr) DECtape Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Support FORTRAN IV/RSX-11D DESCRIPTION: FORTRAN IV/RSX-11 D is an extended implementation of ANSI-66 FORTRAN. The following extensions are implemented in the language: • • • • • Encode and decode statements Print, type and accept 1/0 statements Optimized arithmetic and logical "if" statements Common subexpression elimination Overlay support for programs and data SOFTWARE COMPONENTS: FORTRAN IV Compiler. MINIMUM HARDWARE: Any valid RSX-11 D configuration. PREREQUISITE SOFTWARE: RSX-11 D (QJ580). QP230-AC QP230-AD QP230-AE QP230-AF QP230-CC QP230-CD QP230-CE QP230-CF DECtape Magtape (9-tr) DECpack Magtape (7-tr) DECtape Magtape (9-tr) DECpack Magtape (7-tr) Additional System License without Support FORTRAN IV/RSTS/E DESCRIPTION: FORTRAN IVIRSTSIE is an extended implementation of ANSI-66 FORTRAN. The following extensions are implemented in the language: • Encode and decode statements • Print, type and accept 1/0 statements • Optimized arithmetic and logical "if" statements • Common subexpression elimination • Overlay support for programs and data SOFTWARE COMPONENTS: FORTRAN IV Compiler. MINIMUM HARDWARE: Any valid RSTSIE configuration. PREREQUISITE SOFTWARE: RSTS/E (QR430). QR435-AC QR435-AD QR435-AE QR435-AF DECtape Magtape (9-tr) DECpack Magtape (7-tr) RPG II/RSTS/E DESCRIPTION: RGP II is a high level commercial programming language which allows an applications programmer to perform various functions beyond report generation. RPG II is a parameter driven language, versus COBOL and BASIC which are procedural. RPG II is used primarily as a Batch Processing Language. Features include "Conversion-Aid," Utilities, Data Files, Programs, and Inter-active Processing. SOFTWARE COMPONENTS: RGP II Compiler. MINIMUM HARDWARE: A valid RSTS/E configuration. PREREQUISITE SOFTWARE: RSTS/E (QR430). QP550-AC QP550-AD QP550-AE QP550-AF QP550-AY QP550-AZ DECtape Magtape (9-tr) DECpack Magtape (7-tr) Floppy Disk No hardware dependency 72 ~D~DD~D DIGITAL OEM PRODUCTS PARKER STREET, MAYNARD, MASSACHUSETTS 01754
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021