Dynex DX-LDVD19-10A Flat Panel Television User Manual

DX-LDVD19-10A_09-0340.book Page 1 Tuesday, April 28, 2009 4:43 PM
19" LCD TV/DVD Combo
DX-LDVD19-10A
USE R GU IDE
DX-LDVD19-10A_09-0340.book Page ii Tuesday, April 28, 2009 4:43 PM
ii
Dynex DX-LDVD19-10A
19" LCD TV/DVD Combo
Contents
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Removing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Removing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front and side panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Programming a universal remote control to work with your TV . . . . . . . . . .7
Making connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Connecting an antenna or cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting a camcorder or game . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting an HDMI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting a component video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . .10
Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
11
11
11
12
12
12
Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the computer image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding or skipping channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up a favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the DTV signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Listening to audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning on Auto Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
14
15
15
16
16
16
Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Changing parental control settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DX-LDVD19-10A_09-0340.book Page iii Tuesday, April 28, 2009 4:43 PM
iii
Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Downloading rating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Selecting the menu language and transparency . . . . . . . . . . . . . . . . . . . . . . . 21
Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DVD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Advanced playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
JPEG disc playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Screen saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DVD system setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Care and handling of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
DX-LDVD19-10A_09-0340.book Page iv Tuesday, April 28, 2009 4:43 PM
iv
DX-LDVD19-10A_09-0340.book Page 1 Tuesday, April 28, 2009 4:43 PM
1
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children climb on or play with entertainment system
furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
•
Use only a wall mount rated for the weight of your TV and that has been recommended
by this TV manufacturer, listed in this manual, or otherwise listed by an independent
laboratory as suitable for your TV. One size of wall mount does not fit all.
•
Follow all instructions supplied by the TV and wall mount manufacturers.
•
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
DX-LDVD19-10A_09-0340.book Page 2 Tuesday, April 28, 2009 4:43 PM
2
DX-LDVD19-10A
Important safety instructions
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
This symbol indicates that
dangerous voltage constituting a
risk of electric shock is present
within your TV. This label is located
on the back of your TV.
This symbol indicates that there are
important operating and
maintenance instructions in the
literature accompanying your TV.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete
outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to S3125A
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
The wall plug is the disconnecting device. The plug must remain
readily operable.
An apparatus with a three-prong, grounding-type plug is a Class I
apparatus, which needs to be grounded to prevent possible
electric shock. Make sure that you connect the Class I television to
a grounding-type, three-prong outlet.
Important safety instructions
17 Remote control batteries should not be exposed to excessive heat
such as sunshine, fire, or the like.
18 The apparatus should not be exposed to dripping or splashing,
and no objects filled with liquids, such as vases, should be placed
on the apparatus.
Warnings
Electric shock hazard
To reduce the risk of electric shock, do not remove any cover or expose
the device to rain or moisture. No user-serviceable parts are inside.
Refer servicing to qualified service technicians.
Lightning
For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
• If the LCD panel is broken, make absolutely sure that you do not
touch the liquid in the panel. This may cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service
technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, personal injury, or other
hazards.
Safety check
After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.
Cautions
Damage requiring service
Unplug this TV from the power outlet and refer servicing to qualified
service personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled or objects have fallen into your TV.
• If your TV has been exposed to rain or water.
DX-LDVD19-10A_09-0340.book Page 3 Tuesday, April 28, 2009 4:43 PM
Installing the stand
DX-LDVD19-10A
• If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore your TV to its normal
operation.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in performance.
Attachments
Use only attachments recommended by Dynex.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
1
2
3
Mobile telephone warning
To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.
End of life directives
Your TV contains tin-lead solder and a fluorescent lamp containing a
small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at www.eia.org to
find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors, which
provide exceptionally sharp video quality. Occasionally, a few
non-active pixels may appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely affect the performance
of your TV, and are not considered defects.
Installing the stand
To install the stand:
1 Position the base stand with the Front label positioned facing the
LCD screen.
3
4
5
7
6
Front
1 Antenna lead-in wire
2 Grounding clamp
3 Antenna discharge unit
4 Grounding conductors
2 Push the TV onto the base until the clips snap into place.
3 Secure the base to the TV with four (4) ST4x8 screws.
Screws
5 Ground clamps
Screws
Power service grounding electrode
6 system
7 Electric service equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
guidance for correct grounding. Specifically, it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.
Removing the stand
If you intend to mount your TV on a wall or other vertical surface, you
must remove the stand.
Warning: Before attempting removal of the stand, unplug the AC power
cord.
Cautions:
Read these instructions thoroughly before attempting this installation.
DX-LDVD19-10A_09-0340.book Page 4 Tuesday, April 28, 2009 4:43 PM
4
DX-LDVD19-10A
Make sure that you handle your TV very carefully when attempting
removal of the stand. If you are not sure of your ability to do this, or to
use the tools necessary to complete this job, refer to a professional
installer or service personnel. The manufacturer is not responsible for
any damages or injuries that occur due to mishandling or improper
assembly.
TV components
TV components
Front and side panels
When using a table or bench as an aid to assembly, make sure that you
place the TV on a soft cushion or covering to prevent accidental
scratching or damage to your TV’s finish.
MENU
INPUT
VOL +
VOL -
CH +
CH -
POWER
The speaker is not intended to support the weight of your TV. Do not move
or handle your TV by the speaker. This can cause damage to your TV
that is not covered by the manufacturer’s warranty.
Removing the stand
To remove the stand from the stand column:
1 Lay your TV face down on a table or bench. Make sure that you
put down a soft cushion or cloth so that your TV is not scratched.
2 Adjust the stand so that the angle between the stand and the TV
is 90°.
3 Remove the two (2) M4 screws that secure your TV to the stand,
then pull the stand off the TV.
Remove screws
#
Component
Description
1
MENU
Press to open the on-screen menu.
2
INPUT
Press to select the video input source.
3
VOL+/VOL-
Press to increase or decrease the volume.
4
CH+/CH-
Press to go to the next or previous channel
in the channel list.
5
POWER
6
Power indicator
Lights blue when your TV is turned on.
Lights red when your TV is in standby mode.
Not lit when the power cord is unplugged.
7
Remote sensor
Receives signals from the remote control. Do
not block.
Installing a wall-mount bracket
If you want to attach the TV to a wall-mount bracket (not provided), you
should first remove the stand.
To attach your TV to a wall-mount bracket:
Warning: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of hazards, do not perform any
servicing other than that contained in the operating instructions
unless you are qualified to do so.
• Secure the wall-mount bracket to the back of your TV using the
four M4 screws provided with the bracket.
button Press to turn on your TV. Press again to put
your TV in standby mode.
DX-LDVD19-10A_09-0340.book Page 5 Tuesday, April 28, 2009 4:43 PM
TV components
DX-LDVD19-10A
PC AUDIO IN
HDMI
Back
##
Component
Description
9
(Component)
AUDIO IN jacks
Connect the audio output (L and R) from a
component device to these jacks. For more
information, see “Connecting a component
video device” on page 10.
10
Headphone jack
Plug headphones into this jack.
11
ANT/CABLE IN jack Connect the 75 ohm cable from an antenna
or cable box to this jack.
VIDEO IN SERVICE
VGA IN
Remote control
R AUDIO IN L
POWER
INPUT
DVD
OPEN/CLOSE
CCD
MTS/SAP
SLEEP
PICTURE
1
2
3
4
5
6
0
GUIDE
Y
Pb
COMPONENT IN
S-VIDEO IN
7
9
8
CH+
RECALL
MUTE
Pr
R AUDIO IN L
5
ANT/CABLE IN
VOL
-
ENTER
MENU
INFO
CHCH.LIST FAVORITE
TITLE
##
Component
Description
1
HDMI jack
Connect an HDMI device, such as a cable
box or DVD player, to this jack. An HDMI
cable carries both video and audio, so you
do not need to make an audio connection.
For more information, see “Connecting an
HDMI device” on page 9.
2
PC AUDIO jack
VGA jack
Connect the video output from your
computer to this jack. For more
information, see “Connecting a computer”
on page 10.
4
SERVICE
For firmware update only.
5
VIDEO IN jack
Connect the video output from an AV
device to this jack. For more information,
see “Connecting a VCR” on page 9.
6
AUDIO IN jacks
Connect the audio output (L and R) from an
AV device to these jacks. For more
information, see “Connecting a VCR” on
page 9.
7
S-VIDEO jack
Connect an S-Video device to this jack.
S-Video does not carry an audio signal, so
you will need to connect audio cables from
the device to the AUDIO IN jacks.
8
COMPONENT IN
jacks
Connect a component video device to
these jacks. For more information, see
“Connecting a component video device” on
page 10.
DISPLAY
REV
ZOOM
EXIT
SETUP
SUBTITLE
PREV
NEXT
31
33
32
34
MENU
STOP
PLAY/ENTER
PAUSE
SLOW
35
37
36
38
ZOOM
ANGLE
Connect the audio output from your
computer to this jack. For more
information, see “Connecting a computer”
on page 10.
3
VOL
+
T.SEARCH
39
AUDIO
PROGRAM REPEAT
A-B
40
41
42
10+
43
#
Button
Description
1
POWER
Press to turn on your TV. Press again to put
your TV in Standby mode.
2
INPUT
Press to select the input source.
3
CCD
Press to turn closed captioning on or off. For
more information, see “Using closed
captioning” on page 20.
DX-LDVD19-10A_09-0340.book Page 6 Tuesday, April 28, 2009 4:43 PM
6
DX-LDVD19-10A
Using the remote control
#
Button
Description
#
Button
Description
4
MTS/SAP
Press to select the audio mode. For analog
channels, you can select STEREO, SAP
(secondary audio program), or MONO.
For digital channels, you can select the audio
track (if more than one track is available). For
more information, see “Adjusting the sound”
on page 14.
29
INFO
Press to display information about the
current program. For more information, see
“Displaying additional information” on page
13.
30
EXIT
Press to close the on-screen menu.
31
ZOOM
Press to select the aspect ratio of the picture.
You can select Normal, Zoom, Wide,
Cinema, or Auto Zoom. For more
information, see “Adjusting the TV picture”
on page 13.
5
Numbers
Press to enter channel numbers or the
parental control password.
6
RECALL
Press to go to the last viewed channel.
7
CH+/CHVOL+/VOL–
Press CH+ or CH- to go to the next or
previous channel in the channel list. For more
information, see “Selecting a channel” on
page 12.
Press VOL+ or VOL- to increase or decrease
the volume.
32
SUBTITLE
Press to turn on DVD sub-titles and select the
subtitle language.
33
SETUP
Press to open the DVD General Setup Page.
Press twice to open the DVD Preference Page.
34
NEXT
Press to go to the next chapter on a DVD.
Press to go to the previous chapter on a DVD.
8
ENTER
Press to confirm selections in an on-screen
menu or to open a submenu.
35
PREV
36
PAUSE
Press to pause DVD playback.
9
MENU
Press to open the on-screen menu.
37
STOP
Press to stop DVD playback.
10
CH.LIST
Press to open the channel list. For more
information, see “Selecting a channel” on
page 12.
38
SLOW
Press to play a DVD in slow motion. Each time
this button is pressed, the setting changes.
11
FAVORITE
Press to display the favorite channel list. For
more information, see “Setting up a favorite
channel list” on page 15.
39
T.SEARCH
Press to display the DVD search menu.
40
ZOOM
Press to zoom in on the DVD picture.
41
A-B
Press to replay a selected portion of the DVD.
12
TITLE
Press to display the DVD title menu (when
available).
42
REPEAT
13
DISPLAY
Press to cycle through information about the
DVD, including Time Elapsed, Time
Remaining, Chapter Elapsed, Chapter
Remaining, and Display off.
Press to repeat a DVD chapter. Press again to
repeat a DVD title. Press again to repeat the
entire DVD. Press again to cancel.
43
DVD 10+
If a chapter or track number is over 10, press
this button, then press the number for last
digit in the chapter or track number.
14
REV
Press to fast reverse a DVD.
15
FWD
Press to fast forward a DVD.
16
MENU
Press to go to the root menu on a DVD.
17
PLAY/ENTER
Press to play a DVD.
18
, , , and
Arrow keys
Press to navigate in the on-screen DVD
menus.
19
ANGLE
Press to change the viewing angle of a DVD
(when available).
20
AUDIO
Press to select the audio track of a DVD.
21
PROGRAM
Press to program DVD playback.
22
OPEN/CLOSE
Press to eject the DVD.
23
DVD
Press to go to DVD mode.
24
PICTURE
Press to select the picture mode. You can
select Vivid, Standard, Energy Savings,
Theater, Sports, or Custom. For more
information, see “Adjusting the picture” on
page 13.
25
SLEEP
Press to set the sleep timer. For more
information, see “Setting the sleep timer” on
page 21.
• (Dot) Press to enter a digital sub-channel.
26
27
28
GUIDE
MUTE
Press to display EPG OSD of the channel,
including program name. channel number,
program description, channel label and
program show time.
Press to turn off the sound. Press again to
turn on the sound. Does not affect
headphones.
Using the remote control
Installing remote control batteries
To install remote control batteries:
1 Open the battery compartment cover by pressing the release
button.
2 Insert two AA batteries into the battery compartment. Make sure
that the + and – symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the cover.
Notes:
Do not mix different types of batteries.
Do not mix old and new batteries.
Remove batteries when they no longer have a charge. Chemicals may leak
into the battery compartment. Battery chemicals can cause a rash. If
chemicals leak, clean the battery compartment with a cloth.
DX-LDVD19-10A_09-0340.book Page 7 Tuesday, April 28, 2009 4:43 PM
Using the remote control
Remove the batteries if you do not intend to use the remote control for an
extended amount of time.
Do not dispose of batteries in a fire. Dispose of them as hazardous waste.
Aiming the remote control
To use the remote control:
• Point the remote control towards the remote sensor on the front
of your TV. The remote control’s range is about 26 ft. (8 m).
DX-LDVD19-10A
7
Programming a universal remote control
to work with your TV
You can operate your TV with a new or existing universal remote
control.
To program a universal remote control:
1 Find the code for your universal remote control by identifying its
model (or your set-top box’s remote control manufacturer and
model) on the charts below, then make note of the numbered
code below it. You will use the numbered code to program your
remote control to work with your TV.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
RCA
RCU807
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8
115
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Set-top box manufacturer and model
Notes:
Comcast
M1057
Dish
Network
VIP508,
VIP622
Do not expose the remote control to shock or liquids.
Do not use the remote control in an area with high humidity.
0463
720
Motorola
DRC800
0463
TIVO
DirectTV
Series 3, HD RC23
0091
10463
Do not place the remote control in direct sunlight.
Do not place objects, such as furniture, between the remote control and
the remote sensor.
Codes for other remote controls are available online at:
www.dynexproducts/universalcontrolcodes.aspx
Tips:
The remote control may not work if direct sunlight or bright light shines on
the remote sensor. Either move your TV or change the angle at which
you use the remote control.
• The brand name is often visible on the front of the universal remote
control, and the model number is often visible on the back.
• If your universal remote control isn’t listed on the chart, refer to your
universal remote control’s instructions and try codes for the brands
Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need
to try several codes before finding a match.
2 Follow your universal remote control’s instructions to enter the
code you found in Step 1.
Tips:
• If your universal remote control has a code search feature, run a code
search to identify a code that matches your TV. See your universal
remote control’s instructions for details.
• If your universal remote control has a “Learn” feature, you can
manually program it using your TV remote to “teach” the commands
one at a time. See your universal remote control’s instructions for
details.
3 If all else fails, you must use a different universal remote control
that can operate both your set-top box and your TV. Five such
remotes are listed on the chart, but many other compatible
models are available in the market.
For more help, call technical support for your universal remote
control or set-top box manufacturer, or call the Dynex Customer
Care Center at 1-800-305-2204.
DX-LDVD19-10A_09-0340.book Page 8 Tuesday, April 28, 2009 4:43 PM
8
DX-LDVD19-10A
Making connections
Making connections
Cautions:
Check the terminals for position and type before making any connections.
Loose connections can result in image or color problems. Make sure that
all connections are tight and secure.
The external audio/video equipment shown in these illustrations may be
different from your equipment. If you have questions, refer to the user
manual that came with your equipment.
Always turn the power off when connecting external equipment.
2 Depending on the jacks available on the satellite TV receiver (set
top box), connect a cable from the outgoing jacks on the satellite
box to the corresponding jacks on the back of your TV. The
connection can be to the HDMI, component video, S-Video, or AV
jack.
3 If you use a component video, S-Video, or AV cable, connect audio
cables to the corresponding jacks on the back of your TV and on
the staellite box.
4 Turn on your TV, then press INPUT to select VIDEO mode for the
type of connection you use.
5 Select the channel you want with the remote control for the
cable box.
+'0 ,
Connecting the power
To connect the power:
Back of TV
• Plug the AC cord into an AC power outlet.
/
Cable box
Wall antenna outlet
Bronze wire - do not bend
75 ohm RF coaxial wire
VHF antenna
UHF antenna
Turn clockwise to tighten
Bronze wire - do not bend
Single-family dwellings or houses
Connect to wall antenna jack for
outdoor antenna.
2 Connect the other end of the cable to the ANT/CABLE IN jack on
the back of your TV.
Notes:
Use a 75 ohm cable to eliminate interference and noise from radio waves.
Do not bundle the 75 ohm cable with the power cord or other cables.
If the antenna is not installed correctly, contact qualified service personnel
to correct the problem.
To improve picture quality in a poor signal area, purchase and install a
signal amplifier.
Connecting a cable TV or satellite box
If you subscribe to a cable TV service from a local provider you can watch
cable TV programming. The TV cannot display TV programming unless a
TV tuner device or cable TV converter box is connected to the TV.
For further information regarding cable TV service, contact your local
cable TV service provider(s).
To connect to a cable TV or satellite TV box:
1 Connect the incoming cable from the satellite wall jack to the
SATELLITE IN jack on the satellite box.
Component video cables
5 $ 8 ' ,2 ,1
6 9 ,' ( 2 ,1
ANT/CABLE IN
Multi-family dwellings or apartments
Connect to wall antenna outlet.
<
3E
& 2 0 3 2 1 ( 1 7,1
1 Connect one end of a 75 ohm cable (not included) to the RF OUT
jack on the antenna or on the cable or satellite TV box.
3U
To connect an antenna, cable TV, or satellite TV box:
$ 8 ' ,2 ,1 /
Connecting an antenna or cable TV
5
Always unplug the AC power cord from the AC power outlet when you will
not be using your TV for an extended period of time.
S-Video cable
Your TV should only be operated from the power source indicated on the
label.
HDMI cable
9 ,' ( 2 ,1
Notes:
DX-LDVD19-10A_09-0340.book Page 9 Tuesday, April 28, 2009 4:43 PM
Making connections
DX-LDVD19-10A
Connecting a camcorder or game
1 Make sure that your TV’s power cord is unplugged and the VCR is
turned off.
2 Connect a 75 ohm RF wire to the ANT OUT jack on your VCR and
to the ANT/CABLE IN jack on your TV (1), then switch the output
of the VCR to 3 or 4 and tune your TV to the same channel.
To connect a VCR (option 2):
1 Make sure that your TV’s power cord is unplugged and the VCR is
turned off.
2 Connect an AV cable to the AV VIDEO OUT jack on the VCR.
Tip: Some game consoles have an HDMI connector, which can be used for
a better picture.
To connect a camcorder or game:
1 Make sure that your TV’s power cord is unplugged and the
camcorder or game is turned off.
2 Connect an AV cable to the AV OUT VIDEO, AUDIO-L, and
AUDIO-R jacks on the camcorder or game.
AV cable
To VIDEO IN and
AUDIO-L and R jacks
Pr
R AUDIO IN L
Camcorder or game
3 Connect the other end of the cable to the VIDEO IN, AUDIO-L,
and AUDIO-R jacks on the back of your TV.
ANT/CABLE IN
Video cable
AUDIO-L and R cables
S-Video cable
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
Y
Pb
COMPONENT IN
S-VIDEO IN
2
To S-VIDEO IN jack
Note: Cables are often
color-coded to connectors
Connect yellow to yellow,
red to red, and white to
white.
S-VIDEO IN
R AUDIO IN L
VIDEO IN
Back of TV
Back of TV
VIDEO IN
To connect a VCR (option 1):
R AUDIO IN L
Connecting a VCR
9
To play from a camcorder or game:
1
1 Turn on your TV, then press INPUT to select Composite mode.
2 Turn on the camcorder or game, and set it to the correct output
mode. See the camcorder’s or game’s user guides for more
information.
Connecting an HDMI device
75 ohm RF wire
3 Connect the other end of the cable to the VIDEO IN jack on the
back of your TV.
For a better picture, you can connect an S-Video cable to the
S-VIDEO Out jack on the VCR and to the S-VIDEO IN jack on your
TV.
4 Connect an audio cable to the AV AUDIO OUT jacks on the VCR.
5 Connect the other end of the cable to the AUDIO IN L and R jacks
on the back of your TV.
To connect an HDMI device:
1 Make sure that your TV’s power cord is unplugged and the HDMI
device is turned off.
2 Connect an HDMI cable to the HDMI OUT jack on the HDMI
device.
HDMI
VCR
HDMI cable
To play from the VCR (option 2):
1 Turn on your TV, then press INPUT to select Composite or
S-Video input mode.
2 Turn on the VCR, insert a videotape, then press PLAY on the VCR.
Back of TV
Device with HDMI output
HDMI
3 Connect the other end of the cable to the HDMI jack on the back
of your TV.
To play from the HDMI device:
1 Turn on your TV, then press INPUT select HDMI.
2 Turn on the HDMI device, and set it to the correct output mode.
See the HDMI device’s user guide for more information.
Note: If the external device has DVI output only, use a DVI-to-HDMI
adapter to connect to the HDMI jack, then connect an audio cable to
the PC AUDIO IN jack.
DX-LDVD19-10A_09-0340.book Page 10 Tuesday, April 28, 2009 4:43 PM
10
DX-LDVD19-10A
Turning on your TV for the first time
Connecting a component video device
To connect a component video device:
1 Make sure that your TV’s power cord is unplugged and the
component video device is turned off.
2 Connect a component video cable to the COMPONENT OUT jacks
on the component video device.
Y
Pb
COMPONENT IN
Pr
R AUDIO IN L
Audio cables
Component video cables
S-VIDEO IN
Back of TV
To play video from a computer:
1 Turn on your TV, then press INPUT to select VGA.
2 Turn on the computer, then check the image on your TV. There
may be noise associated with the resolution, vertical pattern,
contrast, or brightness in VGA mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to
another rate, or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or consult the
manufacturer of the PC graphic card.
Resolution
VGA
640x480
31.5
60
SVGA 800x600
37.9
60
XGA
Note: Cables are
often color-coded
to connectors.
Component video device
3 Connect the other end of the component video cable to the
COMPONENT IN jacks on the back of your TV.
4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the
component device.
5 Connect the other end of the audio cable to the
COMPONENT AUDIO-R and AUDIO-L jacks on the back of
your TV.
To play from a component device:
1 Turn on your TV, then press INPUT to select Component.
2 Turn on the component video device and set it to the correct
output mode. See the component video device’s user guide for
more information.
Connecting a computer
Tip: Some computers have an HDMI connector, which can be used for a
better picture.
To connect a computer:
1 Make sure that your TV’s power cord is unplugged and the
computer is turned off.
2 Connect a VGA cable (not provided) to the VGA jack on the
computer, then connect the other end of the cable to the VGA IN
jack on the back of your TV.
Back of TV
VGA IN
Computer
PC AUDIO IN
Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable.
Line freq Frame freq
(KHz)
(Hz)
Mode
1024x768 48.4
60
1280x720 45
60
1280x768 47.45
60
1360x768 47.7
60
Note: All above listed are subject to VESA criteria.
Turning on your TV for the first
time
To turn on and configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected the antenna to the TV, and connected the AC
power.
2 Press POWER , then wait several seconds. The power indicator
LED turns blue and the TV turns on.
3 Select the signal source for your TV.
• Press INPUT to open the signal source menu, then press
CH+ or CH- to select the source. Options include:
• TV
• Composite
• S-Video
• Component
• DVD
• VGA
• HDMI
• Press ENTER/VOL+ to confirm.
4 Select the TV signal source for your TV and auto scan for
channels.
• Press MENU, then press VOL+/VOL- to highlight
CHANNELS.
• Press ENTER/VOL+. The Channels menu opens.
D-Sub cable (analog RGB)
AUDIO
PICTURE
CHANNELS
SETTINGS
Channels
Auto Channels Search
Add/Skip Channels
Favorites
Audio cable (stereo mini plugs)
Channel Labels
Channel Strength
Audio Only
3 Connect an audio cable to the AUDIO OUT jack on the computer,
then connect the other end of the cable to the PC AUDIO IN jack
on the back of your TV.
Note: The audio cable should have a stereo mini plug.
Off
CH+
VOL
-
VOL
+
CH-
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
DX-LDVD19-10A_09-0340.book Page 11 Tuesday, April 28, 2009 4:43 PM
Understanding the basics
DX-LDVD19-10A
• Press CH+/CH- to highlight Auto Channels Search, then
press ENTER/VOL+ The Auto Channels Search sub-menu
opens.
PICTURE
Channels
AUDIO
CHANNELS
SETTINGS
Auto Channels Search
Choose your TV source
Antenna
Cable
Start
0
Analog Channels
0
Digital Channels
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
11
Understanding the basics
Turning your TV on or off
To turn your TV on or off (standby mode):
1 Plug the power cord into an AC power outlet.
2 Press (power). Your TV turns on.
3 Press again to turn off your TV. When you turn off your TV, it
goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To
completely disconnect power, unplug the power cord.
CH-
• Press CH+/CH- to select Antenna or Cable, then press
ENTER. A checkmark appears in the circle next to your
choice.
• Press CH+/CH- to highlight START, then press
ENTER/VOL+. The TV automatically scans and memorizes
all the active, available channels in your area.
5 Set the volume of your TV by pressing VOL+ or VOL-.
6 Set the menu language of your TV.
• Press MENU, then press VOL+/VOL- to highlight SETTINGS.
• Press ENTER/CH-. The Settings menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Note: If your TV does not receive an input signal for several minutes, it
automatically goes into standby mode.
On-screen menu overview
Picture menu
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
Settings
CH+
VOL
-
Parental Controls
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Closed Caption
Time
Audio menu
Menu Settings
Input Labels
Computer Settings
AUDIO
PICTURE
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
CHANNELS
On
Equalizer
• Press CH+/CH- to highlight Menu Settings, then press
ENTER/VOL+. The Menu Settings menu opens.
Custom
Equalizer Mode
Equalizer Setting
Balance
L5
MTS/SAP
Mono
Audio Language
PICTURE
AUDIO
CHANNELS
SETTINGS
Audio
English
SETTINGS
CH+
Settings
Menu Settings
Transparency
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
0
EXIT EXIT
10
Language
English
Channel menu
PICTURE
AUDIO
CHANNELS
SETTINGS
Channels
CH+
VOL
-
PREVIOUS
CH-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Auto Channels Search
Add/Skip Channels
7 Press CH- to highlight Language, then press ENTER/VOL+ to
open the menu.
8 Press CH+/CH- to select the language you want. Options include:
• English
• French
• Spanish
9 Select the channel you want by pressing CH+/CH- to go to the
next or previous channel, or directly by pressing the number
buttons.
Favorites
Channel Labels
Channel Strength
Audio Only
Off
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Settings menu
PICTURE
AUDIO
CHANNELS
SETTINGS
Settings
Parental Controls
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
CH+
VOL
-
VOL
+
CH-
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
DX-LDVD19-10A_09-0340.book Page 12 Tuesday, April 28, 2009 4:43 PM
12
DX-LDVD19-10A
Understanding the basics
Digital sub-channels
Notes:
Depending on the signal source selected, you may see different options on
your screen. The above menus are shown in TV mode.
Menu items that are not selectable are grayed out. Menus in this manual
are described in TV mode, unless otherwise indicated.
The illustrations and screens shown in the manual are for explanation
purposes and may vary from the actual screens on your TV.
Navigating the menus
Press to display the main menu.
A digital TV signal transmits more data than an analog signal. This
increase in data provides a better picture and sound with less static and
interference. The increased data capacity also lets broadcasters fit
several channels into the same bandwidth as an analog signal.
Broadcasters may use these sub-channels to transmit a variety of
information, such as weather forecasts, foreign languages, and
commercials. A digital sub-channel is indicated by the main channel
number, followed by a dot, then the sub-channel number. For example,
5.1 indicates sub-channel 1 of main channel 5.
Adjusting the volume
To adjust the volume:
CH+
VOL
-
ENTER
Press to select menu items, to adjust selected
items, or move on-screen cursor left or right.
VOL
+
• Press VOL+ or VOL– to increase or decrease the volume.
• Press MUTE to temporarily turn off all sound (except the
headphones). Press MUTE again to restore the sound.
Adjusting basic settings
CH-
To adjust basic settings:
CH+
VOL
-
ENTER
VOL
+
Press to select the menu items.
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
CH-
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
CH+
VOL
-
ENTER
VOL
+
Press to confirm your selection or enter a
sub-menu.
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH-
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Press to return to the previous screen.
Press to close the menu.
2 Press VOL+ or VOL– to highlight Settings, then press
ENTER/CH–. The Settings menu opens.
PICTURE
Selecting a channel
To select a channel:
• Press CH+ or CH- to go to the next or previous channel on the
memorized channel list.
• Press the number buttons to enter the analog or digital (main)
channel number you want, then wait for the channel to change,
or press ENTER to change the channel immediately.
• To select a digital sub-channel, press the number buttons to
select the main digital channel, then press the dot (.) button
to select the sub-channel. Wait for the channel to change, or
press ENTER to change the channel immediately.
Note: Button presses must be within three seconds of each other.
• Press RECALL to go to the last channel viewed.
• Press CH.LIST to display a list of memorized channels,
press CH+ or CH- select the channel you want from the list, then
press ENTER/VOL+ to go to that channel.
• Press FAVORITE to display a list of your saved favorite channels,
press CH+ or CH- to select the channel you want from the list,
then press ENTER/VOL+ to go to that channel.
Note: If either list has more than one page, press CH+ or CH- to scroll
through the pages.
AUDIO
CHANNELS
SETTINGS
Settings
Parental Controls
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
3 Press CH+ or CH– to highlight an option, then press
ENTER/VOL+ to enter the sub-menu. You can select:
• Parental Controls—Lets you control which
programs/movies your children can watch, based on industry
ratings.
• Closed Caption—Lets you turn closed captioning on or off.
Also lets you set closed caption options.
• Time—Lets you set the clock and the sleep timer.
• Menu Settings—Lets you set menu language and menu
transparency.
• Input Label—Lets you label a device connected to your
TV’s input jacks.
• Computer Settings—Lets you adjust picture settings to
optimize a computer display.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
DX-LDVD19-10A_09-0340.book Page 13 Tuesday, April 28, 2009 4:43 PM
Adjusting the picture
DX-LDVD19-10A
Displaying additional information
To display additional information:
• Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
• Digital mode information—Displays channel number,
station name, channel label (if preset), broadcast program
name, TV rating, signal type, audio information, resolution,
current time, and current program start and end times.
• Analog mode information—Displays channel number,
channel label (if preset), signal type, and audio information.
• Press GUIDE to display EPG OSD of the channel, including
program name. channel number, program description, channel
label, TV rating, digital closed caption, and program show time.
Channel Number
Channel label
Program name
WGBH-SD
TV-Rating
TV-14
Prev.
3-9 2010
11:00AM-12:00PM
• Color Temperature–Select Warm (increased red),
Normal, or Cool (increased blue).
• Backlight–Adjusts the overall brilliance of the
screen.
• Noise Reduction–Selects the noise reduction mode to
reduce picture noise (snow). Choose High, Middle,
Low, or Off.
• Advanced Contrast–Turn this On to optimize the
picture display for a more vivid image.
• Reset Picture Settings—Resets all picture settings to
factory default.
Note: You can only adjust Brightness, Contrast, Color Temperature, Tint,
and Sharpness if you set the Mode to Custom.
3 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the computer image
Program Name
2.1
13
Next
CS
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
“On-screen menu overview” on page 11.
2 Press MENU. The on-screen menu opens.
No Program Info
Digital closed caption
Program description
TV rating
Program
date
Program show time
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Adjusting the picture
Adjusting the TV picture
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
To adjust the picture:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed, then press ENTER/CH- . The Picture menu opens.
PICTURE
AUDIO
CHANNELS
3 Press VOL+ or VOL– to highlight Settings, then press
ENTER/CH–. The Settings menu opens.
SETTINGS
Picture
PICTURE
Custom
Mode
Settings
AUDIO
CHANNELS
SETTINGS
Computer Settings
Brightness
40
Parental Controls
Contrast
60
Closed Caption
Color
45
Time
Tint
R5
Menu Settings
Sharpness
+5
Input Labels
Computer Settings
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
2 Press CH+ or CH– to highlight an option, then press
ENTER/VOL+ to enter the sub-menu. You can select:
• Mode—Selects the picture mode - Vivid, Standard,
Energy Savings, Theater, Sports, or Custom. You can
also press PICTURE on the remote control to select the
picture mode.
• Brightness—Adjusts the brightness.
• Contrast—Adjusts the contrast.
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
• Advanced Video—Lets you set the following:
• Aspect Ratio–Select Normal, Zoom, Wide, Cinema,
or Auto Zoom.
• Overscan–Turn this On to adjust the picture’s
reproduction rate when receiving DVI signals in VIDEO
format. Available when the signal uses EIA timing
(480i/480p/720p/1080i/1080p).
4 Press CH+ or CH– to highlight Computer Settings, then press
ENTER/VOL+. The Computer Settings menu opens.
PICTURE
Settings
AUDIO
CHANNELS
SETTINGS
Computer Settings
Auto Adjust
H. Position
V. Position
50
50
Clock
Phase
Reset Computer settings
50
29
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
5 Press CH+ or CH– to highlight an option, press ENTER/VOL+ to
open the sub-menu, then press V0L+/- to adjust. You can select:
• Auto Adjust—Automatically adjusts the image settings,
such as position and phase
• H-Position—Moves the image right or left
DX-LDVD19-10A_09-0340.book Page 14 Tuesday, April 28, 2009 4:43 PM
14
DX-LDVD19-10A
Adjusting the sound
•
•
•
•
V-Position—Moves the image up or down
Clock—Adjust the clock setting of the picture
Phase—Adjusts the focus of stable images
Reset Computer Settings—Resets computer settings to
factory default
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the sound
Adjusting the sound
• STEREO—Select this option for programs broadcast in
stereo.
• SAP—Select this option to listen to a secondary audio
program, if available.
• Audio Language—(DTV channels only) Selects an
alternate audio language, if available. May include English,
French, or Spanish.
• Auto Volume— Equalizes the overall volume levels for all
channels.
• Reset Audio Settings—Resets all audio settings to factory
default.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
To adjust the sound:
1 Press MENU. The on-screen menu opens.
PICTURE
AUDIO
Changing channel settings
CHANNELS
SETTINGS
Picture
Automatically scanning for channels
Custom
Mode
To auto scan for channels:
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
1 Press MENU. The on-screen menu opens.
PICTURE
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
AUDIO
CHANNELS
SETTINGS
Picture
CH-
Custom
Mode
2 Press VOL+ or VOL– to highlight AUDIO, then press
ENTER/CH–. The Audio menu opens.
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
AUDIO
PICTURE
CHANNELS
SETTINGS
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Audio
On
Equalizer
Custom
Equalizer Mode
Equalizer Setting
Balance
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH-. The CHANNELS menu opens.
L5
MTS/SAP
Mono
Audio Language
English
PICTURE
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
AUDIO
CHANNELS
SETTINGS
Channels
CH-
Auto Channels Search
Add/Skip Channels
3 Press CH+ or CH– to highlight an option, press ENTER/VOL+ to
open the sub-menu, then press CH+/- to adjust. You can select:
• Equalizer—Select OFF for normal frequency response or
ON for optimized frequency response.
• Equalizer Mode—Selects the sound mode. You can select
Custom (for a customized sound mode), Standard,
Theater (for movies), Music (for musical programs), or
News (for news programs). You can also press AUDIO one or
more times to cycle through the available sound modes.
• Equalizer Setting—Lets you set custom audio settings
when you select Custom.
• Treble—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the high sounds. (available
when the equalizer is turned off).
• Bass—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the low sounds. (available
when the equalizer is turned off).
• Balance—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the balance between the left
and right audio channels.
• MTS/SAP—Only available for analog channels. Also
available by pressing MTS/SAP on the remote control.
Options include:
• MONO—Select this option if there is noise or static on
weak stereo broadcasts.
Favorites
Channel Labels
Channel Strength
Audio Only
Off
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
3 Press CH+ or CH– to highlight Auto Channels Search, then
press ENTER/VOL+. The Auto Channels Search sub-menu opens.
PICTURE
Channels
AUDIO
CHANNELS
SETTINGS
Auto Channels Search
Choose your TV source
Antenna
Cable
Start
0
Analog Channels
0
Digital Channels
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
4 Press CH+/CH- to select Antenna or Cable, then press ENTER.
A checkmark appears in the circle next to your choice.
5 Press CH+/CH- to highlight START, then press ENTER/VOL+.
The TV automatically scans and memorizes all the active,
available channels in your area.
DX-LDVD19-10A_09-0340.book Page 15 Tuesday, April 28, 2009 4:43 PM
Changing channel settings
DX-LDVD19-10A
All available channels are automatically preset in order. After the
search is completed, the first channel number displays on the
screen. This search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels on which
there is no broadcast or a poor signal. The channels found are
automatically saved.
15
Setting up a favorite channel list
You can create a favorite channel list so you can quickly browse through
your favorite channels by pressing FAVORITE, then selecting a channel
from the favorite channel list.
To set up the favorite channel list:
1 Press MENU. The on-screen menu opens.
Adding or skipping channels
You can delete channels from the channel list so that your TV skips the
channels when you press CH+/CH-. You can still tune to the hidden
channel by using the number buttons.
To hide a channel:
1 Press MENU. The on-screen menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
PICTURE
AUDIO
CHANNELS
SETTINGS
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
Tint
R5
Sharpness
+5
PICTURE
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
AUDIO
CHANNELS
SETTINGS
Channels
CH-
Auto Channels Search
Add/Skip Channels
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
Favorites
Channel Labels
Channel Strength
Audio Only
Off
CH+
PICTURE
AUDIO
CHANNELS
SETTINGS
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Channels
Auto Channels Search
3 Press CH+ or CH– to highlight Favorites, then press
ENTER/VOL+. The Favorites sub-menu opens.
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Off
AUDIO
PICTURE
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
Channels
CHANNELS
SETTINGS
Favorites
CH-
Ch 3.0
Ch 10.1 WCAU-DT
Ch 13.0
Ch 14.2 ATSC-2
Ch 19.0
3 Press CH+ or CH– to highlight Add/Skip Channels, then press
ENTER/VOL+. The Add/Skip Channels sub-menu opens.
Ch 5.1 KPI-DT
Ch 11.1 MBC DTV
Ch 14.1 ATSC-3
Ch 14.3 ATSC-3
Ch 23.0
CH+
VOL
-
PICTURE
Channels
AUDIO
CHANNELS
SETTINGS
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Add/Skip Channels
Ch 3.0
Ch 10.1 WCAU-DT
Ch 13.0
Ch 14.2 ATSC-2
Ch 19.0
Ch 5.1 KPI-DT
Ch 11.1 MBC DTV
Ch 14.1 ATSC-3
Ch 14.3 ATSC-3
Ch 23.0
4 Press CH+ or CH– to highlight the channel you want to add to
your favorites list, then press ENTER. The channel is added to the
list.
Notes:
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
4 Press CH+/CH– or VOL+/VOL- to highlight the channel you
want to skip (the default is to show the channel), then press
ENTER to remove the check mark from the channel.
Notes:
If the list has more than one page, press CH+ or CH– to scroll through the
pages.
To add a channel that is being skipped, repeat Steps 1 to 4 and press
ENTER to return the checkmark to the channel.
5 Press EXIT to close the menu.
If the list has more than one page, press CH+ or CH– to scroll through the
pages.
To remove a channel from your favorites list, repeat Steps 1 to 4 and press
ENTER to remove the checkmark from the channel.
5 Press EXIT to close the menu.
6 To select a channel in your favorites list, press FAVORITE, press
CH+/CH- to highlight the channel, then press ENTER/VOL+.
DX-LDVD19-10A_09-0340.book Page 16 Tuesday, April 28, 2009 4:43 PM
16
DX-LDVD19-10A
Changing channel settings
Adding or changing a channel label
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
To label a channel:
1 Press MENU. The on-screen menu opens.
Checking the DTV signal strength
You can check the DTV signal strength to determine if you need to
adjust your antenna or digital cable input. The higher the signal
strength, the less likely you are to experience picture degradation.
To check the DTV signal strength:
1 Press MENU. The on-screen menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
PICTURE
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
CHANNELS
SETTINGS
Custom
Mode
CH+
VOL
-
AUDIO
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
EXIT EXIT
CHCH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
PICTURE
AUDIO
CHANNELS
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
SETTINGS
Channels
PICTURE
Add/Skip Channels
CHANNELS
SETTINGS
Auto Channels Search
Favorites
Add/Skip Channels
Channel Labels
Favorites
Channel Strength
Channel Labels
Audio Only
Off
Channel Strength
Audio Only
CH+
VOL
-
AUDIO
Channels
Auto Channels Search
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
Off
EXIT EXIT
CHCH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
3 Press CH+ or CH– to highlight Channel Labels, then press
ENTER/VOL+. The Channel Labels sub-menu opens.
PICTURE
Channels
AUDIO
CHANNELS
SETTINGS
Channel Labels
3 Press CH+ or CH– to highlight Channel Strength, then press
ENTER/VOL+. The Channel Strength screen opens displaying the
signal strength of the channel.
4 Press EXIT to close the menu.
Listening to audio only
2.1
To listen to audio only:
1 Press MENU. The on-screen menu opens.
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
4 Press CH+ or CH– to select the channel you want to label, then
press VOL+ or VOL– to go to the channel label field.
5 Press CH+ or CH– to select the number or symbol you want,
then press VOL+ to go to the next character. You can use as many
as ten characters to label a channel.
6 When you have finished entering a label, press ENTER to
confirm.
Notes:
To change a character, press VOL+ or VOL– to go to the character you
want to change, then press CH+ or CH– to select a new character.
Repeat Steps 4 to 6 to label additional channels.
7 Press MENU to exit to the previous menu or EXIT to close the
menu.
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Channels
Auto Channels Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
Off
CH+
VOL
-
VOL
+
CH-
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
DX-LDVD19-10A_09-0340.book Page 17 Tuesday, April 28, 2009 4:43 PM
Setting parental controls
DX-LDVD19-10A
3 Press CH+ or CH– to highlight Audio Only, press ENTER/VOL+
to open sub-menu, then press CH+/- to select On.
4 Press EXIT to close the menu.
Notes:
If Audio Only is set to On, the backlight should automatically turn off 5
seconds after last remote command. If the backlight is off, pressing
POWER on the remote control will turn off the TV. Pushing any other
button turns on the backlight and the button’s function is ignored.
audio only is still set to on, the backlight will automatically turn off 5s
after last remote command. When a channel is not Audio Only and the
backlight is turned off, pressing any button other than Power on the
remote control turns on the backlight and Audio Only is automatically
set to Off.
The Audio Only setting of a channel is not remembered. When you change
to another channel, change input, or if you cycle the power, it will be
set to Off.
Turning on Auto Zoom
Auto Zoom automatically adjusts the aspect ratio of the picture, based
on TV size and TV program.
To turn on Auto Zoom:
17
Setting parental controls
Parental controls let you prevent your children from watching
inappropriate material on TV. When set, parental controls read the
rating of the program (with some exceptions, such as news and sports)
and deny access to programs that exceed the ratings level you select. To
watch programs that exceed the selected rating, you must enter a
password.
Changing parental control settings
To change parental control settings:
1 Press MENU. The on-screen menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
1 Press MENU. The on-screen menu opens.
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH– The Settings menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
PICTURE
Brightness
40
Contrast
60
Color
45
Parental Controls
Tint
R5
Closed Caption
Sharpness
+5
Time
AUDIO
CHANNELS
SETTINGS
Settings
Menu Settings
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
Input Labels
CH-
Computer Settings
CH+
2 Press VOL+ or VOL– to highlight CHANNELS, then press
ENTER/CH–. The CHANNELS menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
3 Press CH+ or CH– to highlight Parental Controls, then press
ENTER/VOL+. The Enter Password screen opens.
Channels
Auto Channels Search
AUDIO
PICTURE
Add/Skip Channels
Favorites
Settings
Channel Labels
Parental Controls
Channel Strength
Closed Caption
Audio Only
Off
CHANNELS
SETTINGS
Enter Password
Time
Menu Settings
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
Input Labels
CH-
Computer Settings
3 Press CH+ or CH– to highlight Auto Zoom, press ENTER/VOL+
to open sub-menu, then press CH+/- to select On.
4 Press EXIT to close the menu.
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
PICTURE
Settings
AUDIO
CHANNELS
SETTINGS
Parental Controls
Button Lock
Off
Block Unrated TV
Off
USA Parental Locks
Canadian Parental Locks
Change Password
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
5 Press CH+ or CH– to highlight an option, then press
ENTER/VOL+ to enter the sub-menu. Options include:
DX-LDVD19-10A_09-0340.book Page 18 Tuesday, April 28, 2009 4:43 PM
18
DX-LDVD19-10A
Setting parental controls
• Button Lock—Set to On to lock the buttons on the front of
the TV.
• Block Unrated TV—Set to On to block TV programs that
are not rated.
• USA Parental Locks—Select this sub-menu to change US
parent lock settings. See “Setting parental control levels” on
page 18.
• Canadian Parental Locks—Select this sub-menu to
change Canadian parent lock settings. See “Setting parental
control levels” on page 18.
• Change Password—Select this option to change the
password. See “Setting or changing the password” on
page 18.
• RRT5—Select this option to download ratings. See
“Downloading rating information” on page 19.
6 Press EXIT to close the menu.
Setting or changing the password
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
PICTURE
Settings
AUDIO
CHANNELS
Button Lock
Off
Block Unrated TV
Off
USA Parental Locks
Canadian Parental Locks
Change Password
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
5 Press CH+ or CH– to highlight Change Password, then press
ENTER/VOL+. The Change Password screen opens.
CHANNELS
AUDIO
PICTURE
Settings
Off
Block Unrated TV
1 Press MENU. The on-screen menu opens.
SETTINGS
Parental Controls
Button Lock
To set the parental control password:
SETTINGS
Parental Controls
Off
Enter New Password
USA Parental Locks
Confrim New Password
Canadian Parental Locks
Change Password
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
CH+
VOL
-
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
6 Enter the new password.
7 Enter the new password again, to confirm.
8 Press EXIT to close the menu.
CH+
VOL
-
VOL
+
CH-
Custom
Mode
EXIT EXIT
CH-
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Settings
Setting parental control levels
You can set parental controls for the U.S. and Canada. The following
procedure shows how to set controls for U.S. TV ratings. You use similar
steps for controlling U.S. movie and Canadian TV ratings.
To set parental controls:
1 Press MENU. The on-screen menu opens.
Parental Controls
Closed Caption
Time
PICTURE
Menu Settings
AUDIO
CHANNELS
SETTINGS
Picture
Input Labels
Computer Settings
Custom
Mode
Brightness
40
Contrast
60
Color
45
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
3 Press CH+ or CH– to highlight Parental Controls, then press
ENTER/VOL+. The Enter Password screen opens.
Tint
R5
Sharpness
+5
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
AUDIO
PICTURE
CHANNELS
SETTINGS
Settings
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
Parental Controls
Closed Caption
Enter Password
Time
PICTURE
Menu Settings
AUDIO
CHANNELS
SETTINGS
Settings
Input Labels
Parental Controls
Computer Settings
Closed Caption
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
Time
CH-
Menu Settings
Input Labels
Computer Settings
CH+
VOL
-
VOL
+
CH-
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
DX-LDVD19-10A_09-0340.book Page 19 Tuesday, April 28, 2009 4:43 PM
Setting parental controls
DX-LDVD19-10A
3 Press CH+ or CH– to highlight Parental Controls, then press
ENTER/VOL+. The Enter Password screen opens.
U. S. TV ratings (content-based)
FV
Fantasy violence.
V
Violence.
Settings
S
Sexual situations.
Parental Controls
L
Strong language.
D
Suggestive dialog.
AUDIO
PICTURE
Closed Caption
CHANNELS
SETTINGS
Enter Password
Time
19
Menu Settings
Input Labels
Computer Settings
U.S. movie (MPAA) ratings
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
PICTURE
Settings
AUDIO
CHANNELS
None
Not rated.
G
General audiences.
PG
Parental guidance suggested.
PG-13
Suitable for children 13 and older.
R
Parental guidance suggested for children
under 17.
SETTINGS
Parental Controls
Button Lock
Off
Block Unrated TV
Off
NC-17
Not suitable for children under 17.
X
Adults only.
USA Parental Locks
Canadian Parental Locks
Canadian English ratings
Change Password
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
5 Press CH+ or CH– to highlight USA Parental Locks, then press
ENTER/VOL+. The Parental Controls - USA Parental Locks screen
opens.
Note: Select Canadian Parental Locks to set Canadian controls.
PICTURE
Settings
AUDIO
CHANNELS
TV Ratings
FV
L
S
ALL
None
G
PG
PG-13
R
NC-17
X
Exempt programming.
C
Suitable for all children.
C8+
Suitable for children 8 and older.
G
General audiences.
PG
Parental guidance suggested.
14+
Suitable for children 14 and older.
18+
Adults only.
SETTINGS
Canadian French ratings
Parental Controls USA Parental Locks
MPPA Rating
E
EXIT EXIT
CH-
V
D
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
E
Exempt programming.
G
General audiences.
8 ans+
Suitable for children 8 and older.
13 ans+
Suitable for children 13 and older.
16 ans+
Suitable for children 16 and older.
18 ans+
Adults only.
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
6 Press CH+ or CH– select the rating you want to block, then press
ENTER to block that rating. A checkmark appears when a rating
is blocked.
Note: When you block a rating, that rating and all other higher ratings
are blocked.
7 Press EXIT to close the menu.
Downloading rating information
You can download rating information to use when setting parental
controls.
To download rating information:
1 Press MENU. The on-screen menu opens.
U.S. TV ratings (age-based)
TV-Y
All children.
TV-Y7
Suitable for children 7 and older.
TV-G
General audiences.
TV-PG
Parental guidance suggested.
TV-14
Parental guidance strongly suggested.
TV-MA
Mature audiences only.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
VOL
-
VOL
+
CH-
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
DX-LDVD19-10A_09-0340.book Page 20 Tuesday, April 28, 2009 4:43 PM
20
DX-LDVD19-10A
Using closed captioning
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Settings
Parental Controls
Using closed captioning
Closed captioning helps the hearing impaired with the broadcast
program, as well as helping children learn how to read. A built-in
decoder displays the audio portion of a program as text on the screen
when this option is selected.
Closed Caption
Turning closed captioning on or off
Time
Menu Settings
Input Labels
To turn closed captioning on or off:
Computer Settings
1 Press MENU. The on-screen menu opens.
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
3 Press CH+ or CH– to highlight Parental Controls, then press
ENTER/VOL+. The Enter Password screen opens.
AUDIO
PICTURE
CHANNELS
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
SETTINGS
Settings
Tint
R5
Sharpness
+5
Parental Controls
Closed Caption
CH+
Enter Password
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Time
Menu Settings
Input Labels
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
Computer Settings
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Settings
Parental Controls
Closed Caption
Time
Menu Settings
PICTURE
Settings
AUDIO
CHANNELS
SETTINGS
Parental Controls
Input Labels
Computer Settings
Button Lock
Off
Block Unrated TV
Off
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
USA Parental Locks
Canadian Parental Locks
3 Press CH+ or CH– to highlight Closed Caption, then press
ENTER/VOL+. The Closed Caption menu opens.
Change Password
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
5 Press CH+ or CH– to highlight RRT5 Settings, then press
ENTER/VOL+.
If the program is broadcast with RRT5 rating information, the
information is downloaded automatically and can be used for
parental controls.
Note: If you forget your password or the wrong password is accidentally
set, enter 9443 as the password. This will enable you to regain control.
PICTURE
Settings
AUDIO
CHANNELS
SETTINGS
Closed Caption
Mode
CC Off
Analog Caption
Off
Digital Caption
Off
Digital CC Settings
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
4 Press CH+ or CH– to highlight an option, press ENTER/VOL+ to
open the sub-menu, then press CH+/- to set up. Options include:
• Mode—Select CC On,CC Off, or CC On Mute.
• Analog Caption—For analog programming. Options
include:
• CC1–Standard CC display.
• CC2 to CC4–For other modes of video related broadcast
information.
• Text1–For a program guide or other information
displayed by broadcasters.
• Text2 to Text4–For additional modes of information
displayed by broadcasters.
• Off–Turns analog captions off.
• Digital Caption—For digital programming. Select CS1,
CS2, CS3, CS4, CS5, CS6, or Off.
DX-LDVD19-10A_09-0340.book Page 21 Tuesday, April 28, 2009 4:43 PM
Adjusting time settings
DX-LDVD19-10A
• Digital CC Settings—To change digital closed caption
settings. Options include:
• Style–Select either Automatic or Custom. When you
select automatic, the others are disabled and cannot be
adjusted.
• Size–To select the size of the caption displayed.
• Font–To select the font of the caption displayed.
• Text Color–To select the text color or the opacity of the
text box of caption display. Select a color and one of the
opacity options.
• Text Opacity–To specify the opacity for the text color.
• Background Color–To select a background color.
• Background Opacity–To select the opacity for the
background color.
• Edge Effect–To select the edge effect.
• Edge Color–To select the edge color.
5 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Tip: You can also press CCD to turn closed captioning on or off.
Adjusting time settings
Setting the clock
To set the clock:
1 Press MENU. The on-screen menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
4 Press CH+ or CH– to highlight Date/Time, then press
ENTER/VOL+. The Date/Time menu opens.
PICTURE
Settings
Time
AUDIO
SETTINGS
CHANNELS
Date/Time
Mode
Custom
Time Zone
Pacific
Daylight Savings
Off
2008
Year
May
Month
22
Day
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
5 Press CH+ or CH– to highlight an option. Options include:
• Mode–Press ENTER/VOL+ to open the sub-menu, then
press CH+/– to select Custom or Auto. To set the time
manually, select Custom. When Auto is selected, the time is
set automatically and cannot be adjusted.
• Time Zone–Press ENTER/VOL+ to enter the menu, then
press CH+ or CH– to select your time zone: Eastern,
Central, Mountain, Pacific, Alaska, Hawaii, Atlantic, or
Newfoundland.
• Daylight Savings–To set daylight saving time, press
ENTER/VOL+ to open menu, then press CH+/- to select On
or Off.
• Year–Press VOL+ or VOL– to select the correct year.
• Month–Press VOL+ or VOL– to select the correct month.
• Day–Press VOL+ or VOL– to select the correct day.
• Hour–Press VOL+ or VOL– to select the hour, minute, and
AM/PM options, then press CH+ or CH– to set.
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Setting the sleep timer
You can specify the amount of time you want your TV to wait before it
automatically turns off.
CH-
To set the sleep timer:
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
1 Press MENU. The on-screen menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
PICTURE
AUDIO
CHANNELS
SETTINGS
Settings
Parental Controls
Closed Caption
Time
Menu Settings
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
Input Labels
CH+
VOL
-
Computer Settings
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
3 Press CH+ or CH– to highlight Time, then press ENTER/VOL+.
The Time menu opens.
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Settings
PICTURE
Settings
AUDIO
CHANNELS
SETTINGS
Parental Controls
Closed Caption
Time
Time
Date/Time
Menu Settings
Sleep Timer
Off
Input Labels
Computer Settings
CH+
VOL
-
VOL
+
CH-
CH+
VOL
-
VOL
+
CH-
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
21
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
DX-LDVD19-10A_09-0340.book Page 22 Tuesday, April 28, 2009 4:43 PM
22
DX-LDVD19-10A
Adjusting menu settings
3 Press CH+ or CH– to highlight Time, then press ENTER/VOL+.
The Time menu opens.
Off
AUDIO
CHANNELS
SETTINGS
5 Minutes
10 Minutes
15 Minutes
30 Minutes
45 Minutes
Off
60 Minutes
90 Minutes
120 Minutes
180 Minutes
240 Minutes
PICTURE
Settings
Time
Date/Time
Sleep Timer
3 Press CH+ or CH– to highlight Menu Settings, then press
ENTER/VOL+. The Menu Settings menu opens.
PICTURE
Settings
Transparency
CHANNELS
0
SETTINGS
10
Language
CH+
VOL
-
AUDIO
Menu Settings
English
CH+
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
VOL
-
CH-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
4 Press CH– to highlight Sleep Timer, then press ENTER/VOL+.
The Sleep Timer setting box opens.
5 Press CH+ or CH– to select the time interval that you want your
TV to remain on, then press ENTER to confirm the setting. A
checkmark appears next to the setting you selected.
Note: To turn off the sleep timer, select Off.
4 Press CH+ or CH– to highlight an option. Options include:
• Transparency–Press VOL+ or VOL– to adjust how
transparent the TV menu appears.
• Language–Press ENTER/VOL+ to enter the sub-menu,
then press CH+/- to select the menu language from
English, French, or Spanish.
5 Press EXIT to close the menu.
6 Press EXIT to close the menu.
Note: You can also press SLEEP on the remote control to set the sleep
timer.
Labeling an input source
You can add a label to an input source to make it easier to identify.
To label an input source:
Adjusting menu settings
Selecting the menu language and
transparency
To select the on-screen menu language and menu transparency:
1 Press MENU. The on-screen menu opens.
1 Press MENU. The on-screen menu opens.
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
Tint
R5
Sharpness
+5
CH+
VOL
-
PICTURE
AUDIO
CHANNELS
SETTINGS
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Picture
Custom
Mode
Brightness
40
Contrast
60
Color
45
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
Tint
R5
Sharpness
+5
PICTURE
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
AUDIO
CHANNELS
SETTINGS
Settings
CH-
Parental Controls
Closed Caption
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
Time
Menu Settings
Input Labels
Computer Settings
CH+
VOL
-
PICTURE
AUDIO
CHANNELS
SETTINGS
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
CH-
Settings
Parental Controls
3 Press CH+ or CH– to highlight Input Labels, then press
ENTER/VOL+. The Input Labels menu opens.
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
PICTURE
CH+
VOL
-
VOL
+
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
Settings
AUDIO
CHANNELS
SETTINGS
Input Labels
CH-
Input
Component
Label
Custom
Custom
Reset Input Labels
CH+
VOL
-
VOL
+
CH-
MOVE
ENTER
SELECT
MENU
PREVIOUS
EXIT EXIT
DX-LDVD19-10A_09-0340.book Page 23 Tuesday, April 28, 2009 4:43 PM
DVD Playback
4 Press CH+ or CH– to highlight an option, then press VOL+ or
VOL– to change the setting. Options include:
• Input–To select the input to label.
• Label–To select the label. Options include:
• Custom–Select this option to input your own label.
• VCR
• DVD
• Set Top Box
• Satellite
• Cable Box
• Game
• PC
• Custom–To enter a custom label. Press VOL+ or VOL– to
move between fields and press CH+ or CH– to select the
number of symbol you want (up to ten) to label the input.
Press ENTER to confirm.
• Reset Input Labels–To reset all input labels to factory
default.
5 Repeat Step 4 to enter additional labels.
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
DVD Playback
Basic playback
To load and play a DVD:
1 Press DVD on the remote control to enter DVD mode.
2 When the TV displays “OPEN,” place a DVD in the disc slot with
the label facing the back of the TV.
The disc is loaded automatically after one to two seconds, then
the DVD player reads the DVD and displays the opening menu. (If
there is no disc placed in the DVD slot, “OPEN” will remain on the
screen.)
3 Press the cursor buttons on the remote control to select menu
options, then press PLAY/ENTER to start playback. You can also
press the digit buttons to select a menu option directly, though
some DVDs do not allow this during startup. During playback you
can:
• Press PAUSE to pause playback (still mode). The sound is
muted during still mode.
• Press PLAY/ENTER to resume normal playback.
to fast forward through the disc. Each time
• Press FWD
FWD
is pressed, the fast forward speed changes.
• Press PLAY/ENTER to resume normal playback.
to fast reverse through the disc. Each time
• Press REV
REV
is pressed, the fast reverse speed changes.
• Press PLAY/ENTER to resume normal playback.
to repeat the current chapter. If you press
• Press PREV
within two seconds of when the current chapter begins, it
will move to the last chapter until the start of the disc is
reached.
to skip the current chapter and play the next
• Press NEXT
one.
• Press STOP to stop playback. The TV screen shows the
start logo. With some discs, such as DVDs or CDs, the player
can resume playback from the point where it was stopped.
4 Press PLAY/ENTER to resume playback from the location where
the playback was stopped.
5 Press STOP twice to stop completely.
DX-LDVD19-10A
23
Advanced playback
All described functions can be activated by pressing the indicated
button on the remote control. These functions are for DVDs. If you play
other disc formats, the operation and on-screen display are different.
SUBTITLE—Press this to select a subtitle from the available
languages. The screen displays "SUBTITLE 01/XX", where "01" indicates
the ordinal number of the language, "XX" indicates the total number of
languages available. (The number of language available depends on
disc.) This function can select up to 32 languages, if available.
REPEAT—Press to repeat a portion of the DVD.
• Press once to repeat the current chapter (“CHAPTER” is be
displayed on screen).
• Press twice o repeat the current title (“TITLE” is displayed on the
screen).
• Press three times to repeat the entire DVD (“ALL” is displayed on
the screen).
• Press a fourth time to cancel the repeat function.
A-B—Press to repeat a selected portion of a DVD. Press once to set a
starting point, press again to set an end point and complete the set up.
The selected section will be repeated. Press a third time to cancel this
function.
ANGLE—When enjoying sports, concert, or theatre, press this key to
view the DVD from different angles (when available).
MENU—Press this key to display the DVD root menu.
DISPLAY—Pressing this key cycles through information about the
DVD, including Title Elapsed, Title Remaining, Chapter Elapsed, Chapter
Remaining, and Display off.
PROGRAM—Press to enter program mode, then press the number
buttons to select the program number that you want. When finished
move the cursor to select START, then press PLAY/ENTER to confirm
and start the program playback.
T.SEARCH—Press once to display the search menu for chapter search.
Enter a chapter number to go to that chapter. Press T-SEARCH twice for
time search. Enter hour, minute and second number to go to that spot.
Press the program number buttons to input the item you want, then
press PLAY/ENTER to confirm.
SLOW—Press to play a disc in slow motion. Each time the button is
pressed, the slow motion speed changes. Press PLAY/ENTER to resume
normal playback.
Note: This function does not work for CDs.
TITLE—Pressing this key displays the title menu on some DVDs. You
can then use the number buttons to select the item you prefer.
AUDIO—Press to cycle between Mono Left, Mono Right, Mix-Mono,
and Stereo audio modes.
JPEG disc playback
A JPEG disc contains JPEG (.jpg) format picture information that can be
decoded by software and displayed through the video output interface
or on the television screen.
This function has many applications. For example, you can save files
from a scanner or digital camera in the JPEG format, record these on a
CD-R disc and present them to an audience through this player.
The JPEG format is a convenient method to store images in a small
amount of memory space, and is ideal for archiving information.
When a disc containing standard JPEG picture files is inserted into the
player, a navigation menu is displayed automatically. Use the (up)
and (down) cursor buttons to select a file then press PLAY/ENTER to
begin a slide show.
DX-LDVD19-10A_09-0340.book Page 24 Tuesday, April 28, 2009 4:43 PM
24
DX-LDVD19-10A
DVD Playback
Press PREV or NEXT to move between pictures. Press PAUSE
to stop on the current picture. Press PLAY/ENTER to resume normal
playback.
Screen saver
This TV employs a screen saver mode to help protect the screen during
static video pictures. This can be turned off on the GENERAL SETUP page.
DVD system setup
Accessing the general DVD setup
To access the general DVD setup:
1 Press SETUP on the remote control. The General Setup Page
opens.
-- General Setup Page --(1/2)
Tv Display
4˖3 LB
Angle Mark On
Osd Lang
ENG
Caption
On
Screen Saver Off
Hdcd
Off
Last Memory Off
4˖3/Ps
4˖3/Lb
16˖9
2 Press SETUP twice. The Preference Page opens (when there is a
disc in the player, default cannot be selected).
..Preference Page --(2/2)
Parental
Password
Default
1 Kid Saf
2G
3 Pg
4 Pg 13
5 Pgr
6R
7 Nc17
8 Adult
3 Press the (up) and (down) cursor buttons to select an
option, then press to enter the sub-menu for that option.
4 Press the (up) and (down) cursor buttons to select an
option on the sub-menu, then press PLAY/ENTER to confirm.
5 Press SETUP repeatedly to exit the setup menus.
Making changes to the general DVD setup
To make changes to the general DVD setup:
• 4:3/PS (PS=Pan and Scan)–Select if you have a normal
aspect ratio (4:3) TV, although the NORMAL/LB (letter
box) is a more common choice. In PS mode, wide screen
material will fill the screen, but at the expense of
chopping off extreme left and right edges of the original
film picture. For this feature to work, the disc must be
specially coded. Such discs are uncommon.
• 4:3/LB (LB = Letter Box)–Select this if you have a
normal aspect ratio (4:3) TV. Widescreen material will be
shown in unaltered form, allowing the entire picture
area of the original film to be viewed without any side
cropping. Black bars will appear above and below the
picture.
• 16:9–Select this if you have a widescreen (16:9) TV.
Back bars may still appear above and below the picture,
even on a widescreen TV. This is because some film
directors prefer to use ultra widescreen aspect ratios,
such as 2.35:1. This will normally be indicated on the
DVD packaging.
• Angle Mark—Select On or Off. Lets you select a
particular camera angle when playing a DVD which offers
multiple angles.
• Osd Lang—Lets you select the on-screen display
language.
• Caption—Select On or Off. Lets you display or hide
the picture caption.
• Screen Saver—Select On or Off. Displays an animated
picture on the screen when the DVD player is idle for
more than three minutes.
• Hdcd—Select On or Off. When off, it will display CD by
reading HDCD, for HDCD playback, please choose 1X or 2X.
You can play normal CDs when “HDCD” is set to off. You can
play 44.1K CDs when HDCD is set to 1X, and 88.2K CDs when
HDCD is set to 2X to enhance the audio quality.
• Last Memory—Select On or Off. When this option is On,
your LCD TV/DVD combo remembers the DVD chapter you
were viewing when you turned the player off. When you turn
it back on, it starts playback at the chapter you were last
viewing.
3 Press SETUP repeatedly to exit the setup menus.
Making changes to the Preference Page
The Preference Page is only available when there is no disc in the player.
To make changes to the Preference Page:
1 Press SETUP twice on the remote control. The Preference Page
opens.
1 Press SETUP on the remote control. The General Setup Page
opens.
..Preference Page --(2/2)
Parental
Password
Default
-- General Setup Page --(1/2)
Tv Display
4˖3 LB
Angle Mark On
Osd Lang
ENG
Caption
On
Screen Saver Off
Hdcd
Off
Last Memory Off
4˖3/Ps
4˖3/Lb
16˖9
2 Press the (up) and (down) cursor buttons to select an
option, then press to enter the sub-menu for that option.
Options include:
• TV Display—When using the DVD with the internal TV,
select 4:3/LB. The following options apply only when the
DVD output is connected to an external TV:
1 Kid Saf
2G
3 Pg
4 Pg 13
5 Pgr
6R
7 Nc17
8 Adult
2 Press the (up) and (down) cursor buttons to select an
option, then press to enter the sub-menu for that option.
Options include:
• Parental—The parental control function works in
conjunction with the different censorship levels assigned to
DVDs. These levels help to control the types of DVDs that the
family watches. There are up to 8 censorship classes for DVDs.
Notes:
DX-LDVD19-10A_09-0340.book Page 25 Tuesday, April 28, 2009 4:43 PM
Troubleshooting
DX-LDVD19-10A
To change this setting you must enter your password. (The initial
password is 1234.)
Troubleshooting
Warning: Do not try to repair your TV yourself. Contact authorized service
personnel.
When parental controls are set to OFF, all discs may be viewed.
• Password—You can change your password by entering the
old, four digit password, then entering the new, four digit
password. You must confirm the new four digit password
before the new password can be used.
..Preference Page --(2/2)
Old Password
Parental
Password
Default
New Password
Change
• Default—Resets all settings (except password and parental
lock status) for this DVD player back to the manufacturers
original settings. Press ENTER to perform the reset.
3 Press SETUP repeatedly to exit the setup menus.
Playable discs
Discs
Label
Video and audio
Problem
Solution
No picture or sound
(the screen is not lit)
• Make sure that the power cord is plugged
into a power outlet.
• Press POWER on your TV or the remote
control.
• Try another channel. The problem could be
with the TV station.
Dark, poor, or no
picture (the screen is
lit), but sound is
good
• Select the correct picture mode. For more
information, see “Adjusting the picture” on
page 13.
• Adjust the brightness. For more
information, see “Adjusting the picture” on
page 13.
• Make sure that the antenna or cable TV is
connected correctly. For more information,
see “Connecting an antenna or cable TV” on
page 8.
No color, picture is
dark, or color is not
correct
• Adjust the color saturation. For more
information, see “Adjusting the picture” on
page 13.
Only noise (snow)
appears on the
screen
• Make sure that the antenna or cable TV is
connected correctly. For more information,
see “Connecting an antenna or cable TV” on
page 8.
• Try another channel. The problem could be
with the TV station.
Confirm Pwd
Note: If you forget your password or the wrong password is accidentally
set, enter 1369 as the password. This will enable you to regain control.
25
Contents
Size
DVD Video
Audio+Video
(moving picture)
12 cm
Audio CD
Audio
12 cm
Picture has dotted
lines or stripes
• Adjust the antenna.
• Move your TV away from noise sources,
such as cars, neon signs, or hair dryers.
JPEG
Video (picture)
12 cm
Picture has double
images
• Use a highly directional outdoor antenna or
change to cable or satellite TV.
Kodak CD
Video (picture)
12 cm
Picture has a few
bright or dark dots
• A few bright or dark dots on an LCD screen
is normal. It does not affect the operation of
this TV.
CD-R
Audio or Video
(moving picture)
12 cm
Good picture, no
sound
CD-RW
Audio or Video
(moving picture)
12 cm
• Increase the volume.
• Press MUTE to make sure that the sound is
not muted.
• Make sure that the audio mode is set to
STEREO or MONO. For more information,
see “Adjusting the sound” on page 14.
CD+G
Audio (picture)
12 cm
Audio noise or static
MPEG4
Audio+Video
(moving picture)
12 cm
• Move radio frequency communication
equipment, such as a cordless phone, away
from your TV.
Remote control
Support discs include: DVD, VCD, CD-R, CD-RW, HDCD, JPEG, CD+G,
MPEG-4, Kodak CD, and WMA.
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labelled as
above.
The performance of CD-R or CD-RW disc depends on the way the disc
was burned. In a few cases, their performance may not be consistent or
they may not even play.
This DVD Player is designed and manufactured according to the Region
Management Information that is recorded on a DVD disc. If the Region
number described on the DVD disc does not correspond to the Region
number of this DVD Player, this DVD player will not play that disc.
This Region number of this DVD Player is
1
Problem
Remote control
does not work
Solution
• Replace the batteries. For more
information, see “Installing remote control
batteries” on page 6.
• Make sure that the batteries are inserted
correctly. For more information, see
“Installing remote control batteries” on
page 6.
• Make sure that the power cord is plugged
into an AC power outlet.
DX-LDVD19-10A_09-0340.book Page 26 Tuesday, April 28, 2009 4:43 PM
26
DX-LDVD19-10A
General
Problem
Maintenance
Storing discs
Solution
Cannot tune to
one or more
channels
Password is lost
• The program you want to watch may be
blocked through the parental controls. For
more information, see “Setting parental
control levels” on page 18 or “Changing
parental control settings” on
page 17.
• The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. For more
information, see “Changing channel settings”
on page 14.
• On the Parental Controls menu (TV), enter
9443 for the password, then set a new
password. For more information, see “Setting
parental controls” on page 18.
• On the Parental menu (DVD setup) enter 1369
for the password, then set a new password. For
more information, see “DVD system setup” on
page 24.
Cannot access
some items
• If a setting or option is grayed out, it is not
available in the current input mode.
TV cabinet creaks
• When you are using your TV, the temperature
inside the cabinet increases. This causes the
cabinet to expand or contract, which produces
the creaking noise. This is not a malfunction.
Buttons do not
work
• Unplug the power cord for a few seconds,
then plug it back in and turn on your TV.
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Maintenance
Cleaning
• Before cleaning the screen, unplug your TV from the power
outlet.
• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.
• Do not spray insecticide liquid near your TV. Such chemicals may
cause damage and discoloration to the exposed surfaces.
Care and handling of discs
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so
that fingerprints do not get on the surface. Never stick paper or tape on
the disc.
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth. Wipe
the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
Servicing
Do not try to repair your TV/DVD combo yourself. There are no
user-serviceable parts inside. Turn off your TV/DVD combo, unplug the
power cord, then contact an authorized service center.
Specifications
Design and specifications are subject to change without notice.
Dimensions and weight are approximate.
Model
Picture/sound system
Audio output
External input ports
Power requirements
Power consumption
Temperature
Humidity
Dimensions
Weight
Accessories
19”
NTSC, ATSC, Clear QAM
≥ 3W+3W
AV input, PC input, S-VIDEO input, PC audio
input, YPbPr input, Antenna input, HDMI input,
AUDIO in, headphone, USB for Service
120 V~60 Hz
50 W
Working: +41°F~+95°F (+5°C~+35°C)
Storage: +5°F~113°F (-15°C~+45°C)
Working: 20%~80%
Storage: 5%~90%
18.5 × 7.5 × 15.2 inches
(47.1 × 19.0 × 38.5 cm)
10.8 lbs. (4.9 kg)
Remote control
Batteries (AA x 2)
Component cable
User Guide
Quick Start Guide
DX-LDVD19-10A_09-0340.book Page 27 Tuesday, April 28, 2009 4:43 PM
Legal notices
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
Notices
Specifications and features are subject to change without notice or
obligation.
For service and support call (800) 305-2204.
DX-LDVD19-10A
27
DX-LDVD19-10A_09-0340.book Page 28 Tuesday, April 28, 2009 4:43 PM
28
DX-LDVD19-10A
Legal notices
DX-LDVD19-10A_09-0340.book Page 29 Tuesday, April 28, 2009 4:43 PM
Legal notices
One-year limited warranty
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new
DX-LDVD19-10A (“Product”), that the Product shall be free of defects in the original
manufacture of the material or workmanship for a period of one (1) year from the date
of your purchase of the Product (“Warranty Period”). This Product must be purchased
from an authorized dealer of Dynex brand Products and packaged with this warranty
statement. This warranty does not cover refurbished product. If you notify Dynex during
the Warranty Period of a defect covered by this warranty that requires service, terms of
this warranty apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days) from the date you purchased the
Product. The purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship
of the Product is determined to be defective by an authorized Dynex repair center or
store personnel, Dynex will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable
products or parts. Products and parts replaced under this warranty become the property
of Dynex and are not returned to you. If service of products and parts are required after
the Warranty Period expires, you must pay all labor and parts charges. This warranty
lasts as long as you own your Dynex Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the
Product to the store you purchased it from. Make sure that you place the Product in its
original packaging or packaging that provides the same amount of protection as the
original packaging. If you purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that provides the same
amount of protection as the original packaging.
To obtain in-home warranty service for a television with a screen 30 inches or larger, call
1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will
have an Dynex-approved repair person dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the Product in the United States,
Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
• Accident
• Misuse
• Abuse
• Negligence
• Commercial use
• Modification of any part of the Product
• Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility authorized by Dynex to service
the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has been altered or removed
DX-LDVD19-10A
29
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST
BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Dynex:
For customer service please call 1-800-305-2204
www.dynexproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered
in some countries. All other products and brand names are trademarks of their
respective owners.
DX-LDVD19-10A_09-0340.book Page 30 Tuesday, April 28, 2009 4:43 PM
30
DX-LDVD19-10A
Legal notices
DX-LDVD19-10A_09-0340.book Page 31 Tuesday, April 28, 2009 4:43 PM
Legal notices
DX-LDVD19-10A
31
DX-LDVD19-10A_09-0340.book Page 1 Tuesday, April 28, 2009 4:43 PM
www.dynexproducts.com (800) 305-2204
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2009 Best Buy Enterprise Services, Inc. All rights reserved.
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective owners.
09-0340
ENGLISH