BreatheAudio BA-6640 Quick start manual
Add to my manuals2 Pages
BreatheAudio BA-6640 is a versatile 6-source, 6-zone audio system designed to distribute music throughout your home. With its powerful 40W amplifier, you can enjoy high-quality audio in up to 12 zones. Connect various audio sources like CD players, streaming devices, or turntables to the system, and easily control them using the included keypads. The BA-6640 also features IR emitter outputs, allowing you to control your devices wirelessly. Enjoy a customized audio experience in every room with the BreatheAudio BA-6640.
advertisement
BA-6640 Elevate 6.6 Six Source, Six Zone Audio System
Quick Start Guide
The new Elevate 6.6 whole-home audio system is the perfect 6 source, 6 zone audio system for any home. Jazz up the kitchen, do the salsa on the patio, and let the kids listen to. . .what ever kids listen to these days. . .in the living room, and so on. You can choose music from six audio sources in up to 12 zones throughout the home.
Providing music for the entire family is easy with the Elevate 6.6.
Step 1 Check your Elevate 6.6 System for its contents which are:.
Qty Description
1
6
BA-6640M 6 source, 6 zone amplifier
BA-6640KP Keypads with white, ivory, almond and black inserts and trim plates
1
1
6
1
1
BA-6640AP Allport connection hub
BA-6640APC Allport cable
BA-VEC Visible LED IR emitters
BA-NC1 Network cable
BA-PC2-NA Power cable, 2 wire, North America
Step 2 Terminate the zone speaker wires into the back of the BA-6640AP Allport connection hub. The speaker terminations are labeled zones 1 - 6 L-,L+ and R-,
R+, fig. 1.
Step 3 Plug the zone CAT5 cables into the RJ45 ports on the back of the Allport, fig. 2. Note that the CAT5 plug in order is irrelevant to the operation of the system.
Step 4 Install the Allport into any dual gang low-voltage mounting ring.
Step 5 Plug the BA-6640M amplifier into an AC power source. This activates important internal protective circuitry. When the amplifier is plugged in and the power button is pressed the blue Stand By LED should be lit.
Fig. 1 Fig. 2
L-
L+
R-
R+
L-
L+
R-
R+
L-
L+
L-
L+
R-
R+
L-
L+
R-
R+
L-
L+
R-
R+
L-
L+
R-
R+
L-
L+
R-
R+
L-
L+
R-
R+
Step 6 Plug the Allport Cable into the back of the BA-6640 amplifier and into the face of the Allport, fig. 3. Connect the Network Cable at the Network connection on the Allport and at the back of the BA-6640 amplifier, fig. 4.
Fig. 3 Fig. 4
CONNECT TO
BA-6640EZP
SPEAKER AND DATA SIGNALS
NETWORK
ALL PORT CONNECTION
Step 7 Connect the audio source equipment into the appropriate audio RCA connections at the back of the BA-6640. This connection is made using standard stereo
RCA cables.
Step 8 For each source 1 - 6 plug in one of the included BA-VEC IR emitters into the appropriate IR output 1 - 6 and attach the emitter mouse end to the IR receiver window of the corresponding source equipment. This enables wireless IR communication from the source remote control to the through each of the keypads.
Step 9 At the back of each keypad, set the correct zone number using the Zone Address rotary switch, fig. 5. Note that if you are using the BA-6640XS expander system, that the settings for zones 7 - 12 are settings 7 - C on the rotary switch. Each keypad must have its own unique zone setting. Once set and plugged in, the keypad should be fully functional.
Fig. 5
D
E
01
3
4
5
A
B
89
7
6
Elevate 6.6 Specifications
Zones 1-6 Power Amplifier Outputs
Continuous Average Output Power
Two channels driven 30-20kHz @1% THD
Rated Distortion (1/2 power)
Rated Impedance
Damping Factor
Frequency Response (20-20kHz)
Zones 1-4 Preamplifier Outputs
Variable output
Fixed output
Impedance
Source Inputs 1-6 input Impedance
Input Sensitivity for rated power
Input Overload
Emitter Outputs
Source Outputs
Sum Outputs
Output Drive Current
Output Drive Voltage
Compatible with single and dual emitters
System
System On
External Mute
40W (20W x 2)
0.40%
6 Ohms
50+
±2 dB
0-600mV
600mV
600 Ohms
10K
300mV RMS
3V RMS
100mA
12V
6
2
12V @ 50mA
3-12V DC
Zone Trigger Outputs
Output Power
Outputs
Power Requirements
Power Supply
Power Consumption all channels driven to full-rated power
Cower Consumption average operating conditions
Power Consumption no signal
USA Safety Listing (UL 6500)
Canada Safety Listing (CAN/CSA E60065.00)
CE Listing/SEMKO (EN60065, EN55013,
EN55020, EN6100-3-2, EN6100-3-3/A1)
Physical Specifications
Unit Size Millimeters
Unit Size Inches
Shipping Size Millimeters
Shipping Size Inches
Unit Weight Kilograms
Unit Weight Pounds
Shipping Weight Kilograms
Shipping Weight Pounds
Keypad Size Millimeters
Keypad Size Inches
BreatheAudio reserves the right to change specifications without notice.
12V @ 50mA
6 (zones 1-6)
120VAC/240VAC 50/60Hz
340VA (290W)
50VA (40W)
30VA (12.5W)
88 H x 430 W x 325 D
3 1/2 H x 17 W x 12 3/4 D
290 x 540 x 440
11 3/8 x 21 1/4 x 17 3/8
7.8
17.0
12.7
28.0
107.2 H x 41.5 W x 32.5 D
4 1/4 H x 1 5/8 W x 1 1/4 D
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project