Eiki LC-XD25 Projector User Manual

Multimedia Projector
MODEL
LC-XD25
Owner's Manual
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease
of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid
crystal display (LCD) technology.
◆ Compact Design
◆ Multilanguage Menu Display
This projector is designed compact in size and
weight. It is easy to carry and work anywhere
you wish to use.
◆ Compatibility
The projector widely accepts various video and
computer input signals including: Computers,
6 C o l o r s y s t e m s ( PA L , S E C A M , N T S C,
NTSC4.43, PAL-M, and PAL-N), Component
video, S-video and RGB scart.
◆ Logo Function
◆ Simple Computer System Setting
The projector has the Multi-scan system to
conform to almost all computer output signals
quickly. (p.27)
The digital zoom function expands (to approx.
16 times of the screen size) or compresses
(to approx. a half of the screen size) the
image size, allowing you to focus on crucial
information during the presentation. (p.36)
◆ Blackboard Function
Blackboard* can be used as a projection
screen.
*The board color is limited to Green. (p.32, 40)
◆ Colorboard Function
◆ Auto setup Function
This function enables Input search, Auto
Keystone correction and Auto PC adjustment
by simple pressing the AUTO SETUP button on
the top control. (p.46)
The Power management function reduces
power consumption and maintains the lamp life.
(p.51)
◆ Lamp Control
Brightness of the projection lamp can be
selected. (p.52)
◆ Security Function
◆ Quick Termination
immediately after turning off the projector
without waiting for the termination of the
cooling fan rotation.
The projector provides a switchable interface
terminal. You can use the terminal as computer
input or monitor output conveniently. (p.50)
◆ Power Management
This enables you to get the close color image
to the color image projected on a white screen.
T h e AC p ow e r c o r d c a n b e u n p l u g g e d
The Logo function allows you to customize the
screen logo with the Logo functions. (p.48-49)
You can capture an image for the screen logo,
choose a logo between provided and captured.
◆ Switchable Interface Terminal
◆ Digital Zoom (for Computer)
Operation menu is available in 16 languages:
English, German, French, Italian, Spanish,
Portuguese, Dutch, Swedish, Finnish, Polish,
Hungarian, Romanian, Russian, Chinese,
Korean, and Japanese. (p.45)
The Security function helps you to ensure the
security with the Key lock (p.53) and the PIN
code lock (p.19, 53, 54) functions. You can lock
the operation on the projector and the remote
control. Also you can prevent unauthorized
persons from using the projector.
◆ Closed Caption
Closed Caption is a function that displays
the audio portion of a TV program as text on
the screen. The closed captioning service is
available mainly in the U.S. (p.56)
✔ Notes:
•The On-Screen Menu and figures in this
manual may differ slightly from the product.
•The contents of this manual are subject to
change without notice.
Table of Contents
Features and Design . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . 3
To the Owner . . . . . . . . . . . . . . . . . . . 4
Safety Instructions . . . . . . . . . . . . . . 5
Air Circulation
6
Installing the Projector in Proper
Position
6
Moving the Projector
6
Compliance . . . . . . . . . . . . . . . . . . . . 7
Part Names and Functions . . . . . . . . 8
Front
Back
8
8
Bottom
8
Rear Terminal
Top Control
Remote Control
9
10
11
Remote Control Battery Installation
Operating Range
12
12
Installation . . . . . . . . . . . . . . . . . . . . . 13
Positioning the Projector
Adjustable Foot
13
13
Using the ferrite core
14
Connecting the AC Power Cord
14
Connecting to a Computer
Connecting to Video Equipment
15
16
Connecting to Component Video
and RGB (Scart) Equipment
17
Basic Operation . . . . . . . . . . . . . . . . . 18
Turning On the Projector
Turning Off the Projector
How to Operate the On-Screen Menu
Menu Bar
Zoom and Focus Adjustment
Auto setup function
Keystone Correction
Sound Adjustment
Remote Control Operation
18
20
21
22
23
23
23
24
24
Computer Input . . . . . . . . . . . . . . . . . 26
Input Source Selection
Computer System Selection
Auto PC Adjustment
Manual PC Adjustment
Image Level Selection Image Level Adjustment
Screen Size Adjustment
26
27
28
29
31
33
34
Video Input . . . . . . . . . . . . . . . . . . . . . 37
Input Source Selection (Video)
Input Source Selection
(S-video, Component, RGB Scart 21-pin)
Video System Selection
Image Level Selection Image Level Adjustment
Screen Size Adjustment
37
38
39
40
42
44
Setting . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting
45
Maintenance and Cleaning . . . . . . . . 57
Warning indicator
Cleaning the Air Filter
Attaching the Lens Cover
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
Resetting the Lamp Counter
57
58
58
59
59
60
62
Appendix . . . . . . . . . . . . . . . . . . . . . . 63
Troubleshooting
Menu Tree
Indicators and Projector Condition
Compatible Computer Specifications
Technical Specifications
Optional Parts
Configurations of Terminals
63
66
69
70
71
72
73
Dimensions
PIN Code Number Memo
73
74
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its
respective corporation.
To the Owner
Before operating this projector, read this manual
thoroughly and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in better condition
for a considerable time.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the "Troubleshooting" section on
pages 63-65 of this manual. If the problem still persists,
contact the dealer where you purchased the projector or
the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO R E D U C E T H E R I S K O F E L E C T R I C
S H O C K , D O N OT R E M OV E C OV E R ( O R
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
T H I S S Y M B O L I N D I C AT E S T H AT T H E R E A R E
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
The symbol mark and recycling systems described below apply to
EU countries and do not apply to countries in other areas of the
world.
Your product is designed and manufactured with high quality
materials and components which can be recycled and/or reused.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their end-oflife, should
be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this
chemical symbol means that the battery or accumulator contains
a heavy metal at a certain concentration. This will be indicated as
follows: Hg: mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems for
used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment
we live in!
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
Safety Precaution
WARNING:
–THIS APPARATUS MUST BE EARTHED.
–TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
– This projector produces intense light from the projection
lens.Do not stare directly into the lens, otherwise, eye
damage could result. Be especially careful that children
do not stare directly into the beam.
– Install the projector in a proper position. If not, it may
result in a fire hazard.
– Provide appropriate space on the top, sides and rear
of the projector cabinet for allowing air circulation
and cooling the projector. Minimum clearance must
be maintained. If the projector is to be built into a
compar tment or similarly enclosed, the minimum
distances must be maintained. Do not cover the
ventilation slot on the projector. Heat build-up can
reduce the service life of your projector, and can also be
dangerous.
SIDE and TOP
REAR
0.7'(20cm)
1.5'(50cm)
3'(1m)
3'(1m)
– If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
– Do not project the same image for a long time. The
afterimage may remain on the LCD panels by the
characteristic of panel.
CAUTION
Do not set the projector in greasy, wet, or smoky
conditions such as IN a kitchen to prevent A
Breakdown or a disaster. If The PROJECTor comes
in contact with oil or chemicals, IT may become
deteriorated.
CAUTION
Not for use in a computer room as defined in the Standard
for the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard
for Protection of Electronic Computer/Data Processing
Equipment.
NOTE:
This LCD projector is not designated as Transportable
Equipment.
This product is evaluated as movable equipment used on
tabletop.
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them
for later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and power line surges.
This projector should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of power supplied, consult your authorized
dealer or local power company.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything to
rest on the power cord. Do not locate this projector where
the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
Do not place this projector on an unstable cart, stand,
or table. The projector may fall, causing serious injury
to a child or adult, and serious damage to the projector.
Use only with a car t or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer's instructions,
a n d s h o u l d u s e a m o u n t i n g k i t a p p r ove d by t h e
manufacturers.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a.When the power cord or plug is damaged or frayed.
b.If liquid has been spilled into the projector.
c.If the projector has been exposed to rain or water.
d.If the projector does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the projector to normal operation.
e.If the projector has been dropped or the cabinet has
been damaged.
f.When the projector exhibits a distinct change in
performance-this indicates a need for service.
An appliance and car t combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and car t
combination to overturn.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation, to ensure reliable operation of
the equipment and to protect it from overheating.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety
checks to determine that the projector is in safe operating
condition.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed near
or over a radiator or heat register.
NOTE FOR CUSTOMERS IN THE US
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
MERCURY AND MUST BE RECYCLED OR
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of airconditioning equipment.
OR FEDERAL LAWS.
DISPOSED OF ACCORDING TO LOCAL, STATE
Safety Instructions
Air Circulation
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked
or covered.
Installing the Projector in Proper
Position
Install the projector properly. Improper Installation may
reduce the lamp life and cause a fire hazard.
20˚
Do not tilt the projector more than
20 degrees from side to side.
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
–Do not put any flammable object or spray can near
the projector, hot air is exhausted from the ventilation
holes.
–Keep the exhaust vent at least 3' (1 m) away from any
objects.
–Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
–Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also cause fire
hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
20˚
Do not point the projector up to
project an image.
Do not point the projector down to
project an image.
Do not put the projector on either
side to project an image.
CAUTION
Choose the running speed of cooling fans in the fan
control setting according to the altitude in which
the projector is being used (p.55). Failure to do so
may affect the projector life.
Moving the Projector
When moving the projector, replace the lens cover and
retract the adjustable foot to prevent damage to the lens
and cabinet. When the projector is not in use for an
extended period, put it into the supplied carrying case
with the lens side up to protect the projector. The carrying
case (supplied) is intended for protection against dust
and scratches on surface of the cabinet, and it is not
designed to protect an appliance from external forces. Do
not transport the projector by courier or any other transport
service with this case, otherwise the projector can be
damaged.
When handling the projector, do not drop, bump, subject it
to strong forces, or put other things on the cabinet.
Air intake Vent
Exhaust Vent
(Hot air exhaust)
Exhaust Vent (Hot air exhaust)
Air Intake Vent
Exhaust Vent (Hot air exhaust)
USE CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by using a courier or
transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the
projector through a courier or transport service, consult
your dealer for their information.
–Do not put the projector in a case before the projector
is cooled enough.
Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
: LC-XD25
Trade Name
: EIKI
Responsible party : EIKI International, Inc.
Address
: 30251 Esperanza Rancho Santa Margarita CA 92688-2132
Telephone No.
: 800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the
plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable
to insert the plug into the outlet, contact your electrician.
GROUND
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of
the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating,
marked thus
. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse
cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse
covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow . . . . . . . Earth
Blue . . . . . . . . . . . . . . . . . Neutral
Brown . . . . . . . . . . . . . . . . Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol
or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED.
ASA
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
Part Names and Functions
Front
q Speaker
w Infrared Remote Receiver
e Focus Lever
r Lens
t Zoom Lever
yLens Cover
(See page 58 for attaching.)
CAUTION
w
q
er t
y
u
Do not turn on a projector with lens cover
attached. High temperature from light beam
may damage lens cover and result in fire
hazard.
u Air Intake Vent (front and bottom)
Back
o
!0
o
o
!1 !2
i Power Cord Connector
o Exhaust Vent
CAUTION
Hot air is exhausted from the exhaust vent. Do not
put heat-sensitive objects near this side.
!0 Lamp Cover
!1 Top Controls and Indicators
i ✽
Bottom
!2 Terminals and Connectors
u
!3
u
!3 Adjustable Foot
!4 Air Filter
!4
✽ Kensington Security Slot
u
This slot is for a Kensington lock used to
deter theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.
o
Part Names and Functions
Rear Terminal
q
w
e
r
t
u
y
q SERVICE PORT
t VIDEO IN
This jack is used to service the projector.
Connect the composite video output from video
equipment to VIDEO jack. (p16)
w COMPUTER IN 1 / S-VIDEO IN
/ COMPONENT IN
Connect output signal from a computer, RGB
scar t 21-pin video output, S-video output,
or component video output to this terminal.
(p.15-17)
When the cable is of the longer variety, it
is advisable to use this ter minal and not
COMPUTER IN 2 / MONITOR OUT.
e COMPUTER IN 2 / MONITOR OUT
This terminal is switchable and can be used for
input from a computer or output the incoming
RGB analog signal from COMPUTER IN1
/S-VIDEO IN / COMPONENT IN terminal to the
other monitor.
Set the terminal up as either Computer input
or Monitor output properly. (Used for Monitor
out, this terminal outputs only incoming RGB
signal from COMPUTER IN 1/S-VIDEO IN /
COMPONENT IN terminal.) (p15, 17, 50)
y AUDIO IN
Connect the audio output from video equipment
connected to w or t to this jack. (When
the audio output is monaural, connect it to L
(MONO) jack.) (p.16)
u COMPUTER/ COMPONENT AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to w or
e to this jack. (p15, 17)
r AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack.
(p15 - 17)
This terminal outputs sound from AUDIO IN
terminal (y or u).
Part Names and Functions
Top Control
y
t
o
r
e
w
i
q
u
q SELECT button
y LAMP REPLACE indicator
–Execute the selected item. (p.21)
–Expand or compress the image in Digital zoom
mode. (p.36)
w POINT (ed) buttons
–Select an item or adjust the value in the
On-Screen Menu. (p.21)
–Pan the image in Digital zoom + mode.
(p.36)
e AUTO SETUP button
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (p.23, 46).
r POWER ON/STAND-BY button
Turn the projector on or off. (p.18, 20)
tWARNING indicator
Emit a red light when the projector detects
an abnormal condition. This also blinks red
when the internal temperature of the projector
exceeds the operating range. (p.57, 69)
10
Turn yellow when the life of the projection lamp
draws to an end. (p.60, 69)
uMENU button
Open or close the On-Screen Menu. (p.21)
i POINT (7 8) buttons
–Select an item or adjust the value in the
On-Screen Menu. (p.21)
–Pan the image in Digital zoom + mode.
(p.36)
–Adjust the volume level. (p.24)
o POWER indicator
–Lights red when the projector is in stand-by
mode.
–Lights green during operations.
–Blinks green in the Power management mode
(p.51).
Part Names and Functions
Remote Control
q POWER ON/STAND-BY button
e
w
Turn the projector on or off. (p.18, 20)
w VIDEO button
q
Select VIDEO input source. (p.24, 37)
e COMPUTER button
Select COMPUTER input source. (p.24, 26, 38)
r MENU button
Open or close the On-Screen Menu. (p.21)
t Point ed 7 8 (VOLUME + / –) buttons
!5
r
t
!4
y
!3
u
– Select an item or adjust the value in the OnScreen Menu. (p.21)
– Pan the image in Digital zoom + mode. (p.36)
– Adjust the volume level. (Point 7 8 buttons) (p.24)
y SELECT button
– Execute the selected item. (p.21)
– Expand or compress the image in Digital zoom mode. (p.36)
u D.ZOOM ed buttons
Zoom in and out the images. (p.25, 36)
i FREEZE button
Freeze the picture. (p.24)
o NO SHOW button
Temporarily turn off the image on the screen. (p.25)
!2
!0 LAMP CONTROL button
!1
!1 MUTE button
Select the lamp mode. (p.25, 52)
Mute the sound. (p.24)
!2 P-TIMER button
Operate the P-timer function. (p.25)
!3 IMAGE button
Select the image level. (p.25, 31, 40)
!4 AUTO PC button
io
!0
Automatically adjust the computer image to its optimum
setting. (p.25, 28)
!5 KEYSTONE button
Correct the keystone distortion. (p.23, 47)
To ensure safe operation, please observe the following
precautions:
–Do not bend, drop or expose the remote control to
moisture or heat.
–For cleaning, use soft dry cloth. Do not apply benzene,
thinner, spray or any chemical material.
11
Part Names and Functions
Remote Control Battery Installation
1
Open the battery
compartment lid.
2
Install new batteries
into the compartment.
3
Replace the
compartment lid.
Two AA size batteries
For correct polarity
(+ and –), be sure
battery terminals are in
contact with pins in the
compartment.
To ensure safe operation, please observe the following precautions:
●Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture or heat.
●Do not drop the remote control.
●If the battery has leaked on the remote control, carefully wipe the case clean and install new
batteries.
●Risk of explosion if a battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions.
Operating Range
Point the remote control toward the
projector (Infrared Remote Receiver)
when pressing any button. Maximum
operating range for the remote control is
about 16.4' (5 m) and 60° in front of the
projector.
12
16.4'
(5 m)
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set horizontally to the flat screen.
✔ Notes:
•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
•The values shown below are approximate and may vary from the actual sizes.
(Inch Diagonal)
32.8' (10.0 m)
A:B = 6:1
26.9' (8.2 m)
300" Max. Zoom
17.7' (5.4 m)
13.4' (4.1 m)
Min. Zoom
200"
8.9' (2.7 m)
246"
150"
3.6' (1.1 m)
100"
A
162"
123"
81"
40"
(Center)
B
Screen Size
(W x H) mm
4 : 3 aspect ratio
40"
100"
813 x 610
2032 x 1524
3048 x 2286
4064 x 3048
6096 x 4572
Zoom (max)
3.6' (1.1 m)
8.9' (2.7 m)
13.4' (4.1 m)
17.7' (5.4 m)
26.9' (8.2 m)
Zoom (min)
4.3' (1.3 m)
10.8' (3.3 m)
16.4' (5.0 m)
22.0' (6.7 m)
32.8' (10.0 m)
150"
200"
300"
Adjustable Foot
Projection angle can be adjusted up to 10.0 degrees with
the adjustable foot.
1
Lift the front of the projector and push the foot lock
latch on the projector.
2
Release the foot lock latch to lock the adjustable foot
and rotate the adjustable foot to adjust the position and
tilt.
3
To retract the adjustable foot, lift the front of the
projector and push and undo the foot lock latch.
Keystone distortion of the projected image can be
corrected by menu operation. (p.23, 47)
Foot Lock Latch
Adjustable Foot
13
Installation
Using the ferrite core
Before using the AC Power Cord, attach the ferrite core
(supplied) as shown in the figure. The Power Cord with
ferrite core must be used for RF interference suppression.
Ferrite Core
0.39" (10 mm)
AC Power Cord
Connecting the AC Power Cord
Keep closing until
it makes a clicking
sound.
This projector uses nominal input voltages of 100-120
V or 200-240 V AC. This projector automatically selects
the correct input voltage. It is designed to work with
single-phase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not
plug into any other type of power system.
Consult your authorized dealer or service station if you
are not sure of the type of power being supplied.
Connect the projector with all peripheral equipment
before turning the projector on. (See pages 15-17 for
connection.)
CAUTION
The AC outlet must be near this equipment and must be easily
accessible.
Connect the AC power cord (supplied) to the
projector.
✔ Note:
Unplug the AC power cord when the projector is not in use.
When this projector is connected to an outlet with the AC
power cord, it is in Stand-by mode and consumes a little
electric power.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada
For Continental Europe
For the U.K.
Ground
To power cord
connector on your
projector.
14
To the AC outlet.
(120 V AC)
To the AC outlet.
(200 - 240 V AC)
To the AC outlet.
(200 - 240 V AC)
Installation
Connecting to a Computer
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• Audio Cables (Mini Plug: stereo)
( Not all the cables are supplied with this projector.)
Audio Output
Monitor Output
Monitor Output
or
Monitor Input
External Audio Equipment
VGA cable
VGA cable
Audio cable
(stereo)
Audio Input
COMPUTER IN 1
/ S-VIDEO IN
/COMPONENT IN
COMPUTER IN 2/ This terminal is switchable.
Set up the ter minal as
MONITOR OUT
either Computer input or
Monitor output. (See Page
50.)
Audio cable
(stereo)
AUDIO OUT
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
✔ Notes:
•Input sound to the COMPUTER / COMPONENT AUDIO IN terminal when using the COMPUTER IN 1
/S-VIDEO IN / COMPONENT IN and the COMPUTER IN 2 / MONITOR OUT terminal as input.
•When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN /
COMPONENT IN and not the COMPUTER IN 2/MONITOR OUT.
Unplug the power cords of both the projector and external equipment from the AC outlet before
connecting cables.
15
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-VIDEO Cable
• S-VIDEO-VGA Cable
• Audio Cable (RCA x 2, Mini Plug: stereo)
(Not all the cables are supplied with this projector.)
S-video Output
Composite Video and Audio Output
(R) (L)
(R) (L) (Video)
External Audio Equipment
S-video
cable
Audio cable
(stereo)
Video and audio cable
Audio Input
S-videoVGA cable
COMPUTER IN 1/ (R) (L)
S-VIDEO IN
/COMPONENT IN
(R) (L) (Video)
AUDIO IN VIDEO IN
Audio cable
(stereo)
AUDIO OUT
(stereo)
✔ Notes:
•When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
•See page 72 for ordering optional parts.
Unplug the power cords of both the projector and external equipment from the AC outlet before
connecting cables.
16
Installation
Connecting to Component Video and RGB (Scart) Equipment
Cables used for connection
• Audio Cables (Mini Plug :stereo)
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Not all the cables are supplied with this projector.)
Audio Output
RGB Scart
21-pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
External Audio Equipment
Component
cable
Scart-VGA
cable
Audio cable
(stereo)
ComponentVGA cable
Audio cable
(stereo)
COMPUTER IN 1/S-VIDEO IN/COMPONENT IN
Audio Input
AUDIO OUT
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
✔ Notes:
•When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
•See page 72 for ordering optional parts.
Unplug the power cords of both the projector and external equipment from the AC outlet before
connecting cables.
17
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
2
Connect the projector’s AC power cord into an AC
outlet. The POWER indicator becomes red. Open the
lens cover.
3
Press the POWER ON/STAND-BY button on the
top control or on the remote control. The POWER
indicator becomes green and the cooling fans start
to operate. The preparation display appears on the
screen and the count down starts.
4
After the countdown, the input source that was
selected the last time and the Lamp mode status icon
(see page 52) appears on the screen.
5
If there is no signal input when start on the projector,
or the current signal is missed while operating the
projector, the Video/PC selection window will be
displayed on the screen, please move the pointer to
input source desired by pressing the Point ed buttons
and press the SELECT button. And then follow the
input signal guidance window to correct the signal and
connection.
If the projector is locked with a PIN code, PIN code
Input Dialog Box appears. Enter the PIN code as
instructed on the next page.
16
The preparation display disappears after 30
seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See page 52 for Lamp mode.)
Video / PC selection window
Input signal guidance window
No signal
Current Input setting:Video
Is signal processed correctly?
Is cable connected properly?
Video / PC selection window
✔ Notes:
•When the Input Search function is set On1 or On2, the
input signal will be searched automatically (p.46)
•When the Logo select function is off, the logo is not
shown on the screen. (p.48)
•When the "Countdown off" or "Off" is selected in the
Display function, the countdown is not shown on the
screen. (p.47)
Input signal guidance window
No signal
•During the countdown period, all operations are
invalid.
Current Input setting:RGB
•When the "Off" is selected in the Display function,
the Video/PC selection window and the input signal
guidance window are not shown on the screen. (p.47)
Is signal processed correctly?
18
Is cable connected properly?
Basic Operation
To Enter a PIN code
PIN Code Input Dialog Box
Select a number by pressing the Point ed buttons, and
then press the Point 8 button to fix the number and move
the pointer. The number changes to "✳". If you fixed
an incorrect number, move the pointer to the number
you want to correct by pressing the Point 7 button, and
then select the correct number by pressing the Point ed
buttons.
Repeat this step to complete entering a four-digit number.
"1234" is set as the initial PIN code at the factory.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point 8 button. Press the SELECT
button so that you can start to operate the projector.
If you entered an incorrect PIN code, "PIN code" and the
number (✳✳✳✳) turns red. Enter the correct PIN code all
over again.
After the OK icon
disappears, you can
operate the projector.
What is PIN code?
PIN (Personal Identification Number) code that allows the
person who knows it to operate the projector. Setting a
PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the
PIN code lock function in the Setting on pages 53 and 54
for locking operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer
be started. Set a new PIN code with special care, write
it down in column on page 74 of this manual, and keep it
on hand. Should the PIN code be missing or forgotten,
consult your dealer or service center.
✔ Note:
If the PIN code number is not input for three minutes
after the PIN code dialog box appeared, the projector
is turned off automatically.
19
Basic Operation
Turning Off the Projector
1
Press the POWER ON/STAND-BY button on the
top control or on the remote control, and a message
"Power off?" appears on the screen.
2
Press the POWER ON/STAND-BY button again to
turn off the projector.The POWER indicator starts to
blink red, and the cooling fans keep running. (You can
select the level of fan quietness and rotation speed.
See page 55.)
At this time you can disconnect the AC power cord
even if the fans are still running.
3
The message disappears after 4 seconds.
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT OFF.
D O N O T O P E R AT E T H E P R O J E C T O R
CONTINUOUSLY WITHOUT REST.CONTINUOUS
USE MAY RESULT IN SHORTENTING THE LAMP
LIFE.TURN OFF THE PROJECTOR AND GIVE IT A
REST ABOUT AN HOUR IN EVERY 24 HOURS.
✔ Notes:
•When the On start function is on, this projector is turned on automatically by connecting the AC power
cord to an AC outlet. (p.51)
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING indicator blinks or emits a red light, see "Warning indicator" on page 57.
•While the POWER indicator is blinking, lamp is being cooled down and the projector cannot be turned
on. Wait until the POWER indicator stops blinking to be turned on again.
• The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector
is turned off.
• The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan cooling is completed, compared with the time
the AC power cord is immediately unplugged after the power-off.
20
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
1
Press the MENU button to display the On-Screen
Menu.
2
Press the Point 7 8 buttons to select a Menu icon to
adjust and press the Point ed buttons to select an
item to adjust.
3
Press the SELECT button to show the item data. To
adjust the data, press the Point 7 8 buttons. Refer to
the following pages for each adjustment.
Top Control
POINT buttons
(outer ring)
MENU button
SELECT button
Remote Control
MENU button
To close the On-Screen Menu, press the MENU button
again.
POINT buttons
✔ Note:
The selected item is not active until the SELECT
button is pressed.
SELECT button
Menu icon
On-Screen Menu
Menu bar
Pointer
(red framed )
Pointer (red framed )
Press the Point ed buttons to
move the pointer.
Item
SELECT
button
Item data
Press the Point 7 8
buttons to adjust the
value.
Quit
Exit this menu.
21
Basic Operation
Menu Bar
For detailed functions, see Menu Tree on pages 66-68.
For computer source
Guide Window
PC System Menu
Image Select Menu
Screen Menu
Setting Menu
Show the selected
Menu of the
On-Screen Menu.
Used to select
computer system.
(p.27)
Used to select an
image level among
D y n a m i c, S t a n d a r d ,
Real, Blackboard
(Green), Colorboard
and Image 1 ~ 4. (p.31)
Used to adjust size of
image. [Normal / True
/ Wide / Full / Custom
/ Digital zoom +/– ]
(p.34-36)
Used to set the
projector's operating
configurations.
(p.45-56)
Input Menu
PC Adjust Menu
Image Adjust Menu
Sound Menu
Used to select
input source
either Computer
or Video. (p.26)
Used to adjust
parameters to match
with input signal
format. (p.28-30)
Used to adjust computer
image.[Contrast /
Brightness / Color temp.
/ White balance (R/G/B)
/ Sharpness / Gamma]
(p.33-34)
Used to adjust the
volume or mute the
sound. (p.24)
✔ Note:
Items will be same as the items in video source
when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected.
For video source
Input Menu
Image Select Menu
Screen Menu
Used to select input
source either Video or
Computer. (p.37, 38)
Used to select an image level among
Dynamic, Standard, Cinema, Blackboard
(Green), Colorboard and Image 1 ~ 4. (p.40)
Used to set size of image
to Normal, Wide or
Custom. (p.44)
Same function as
menu for computer
source.
22
AV System Menu
Image Adjust Menu
Used to select system
of selected video
source. (p.39)
Used to adjust picture image.
[Contrast / Brightness / Color / Tint
/ Color temp. / White balance (R/G/
B) / Sharpness / Gamma / Noise
reduction / Progressive ] (p.42-43)
Same function
as computer
menu.
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Lever to adjust the projected picture
focus.
Auto setup function
Focus Lever
(Front)
Zoom Lever
(Rear)
Top Control
Auto setup function is provided to automatically execute
the setting of Auto setup (includes Input search, Auto PC
adj. and Auto Keystone functions) in the setting menu by
just pressing the AUTO SETUP button on the top control.
Refer to page 46 for the setting of the Auto setup function.
AUTO SETUP button
Keystone Correction
If a projected picture still has keystone distortion after
pressing the AUTO SETUP button on the top control,
correct the image manually as follows:
Press the KEYSTONE button on the remote control. The
keystone dialog box appears.
Correct keystone distortion by pressing the Point ed
buttons. Keystone adjustment can be memorized. (p.47)
Reduce the upper width
with Point e button.
Reduce the lower width
with Point d button.
•T h e a r r o w s a r e w h i t e w h e n t h e r e i s n o
correction.
•The direction of the arrow being corrected turns
red.
•T h e a r r o w s d i s a p p e a r a t t h e m a x i m u m
correction.
•I f you press the KEYSTONE button on the
remote control once more while the keystone
dialog box is being displayed, the keystone
adjustment is canceled.
• The adjustable range is limited depending
on the input signal.
Top Control
POINT ed buttons
Remote Control
KEYSTONE button
POINT ed buttons
23
Basic Operation
Sound Adjustment
Direct Operation
Top Control
Volume
VOLUME+/- buttons
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog
box appears on the screen for a few seconds.
Mute
Press the MUTE button on the remote control to
temporarily turn off the sound. To turn the sound back on,
press the MUTE button again or press the VOLUME +/–
buttons.
Mute function is also effective for AUDIO OUT jack.
Remote Control
VOL- button
VOL+ button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Sound Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to select, and then
press the SELECT button.
MUTE button
Approximate level
of the volume.
Volume
Press the Point 8 button to turn up the volume, and press
the Point 7 button to turn down the volume.
Mute
Press the Point 7 8 buttons to switch the mute function
On/Off. When the sound is turned off, “On” is displayed.
Press the Point 7 8 buttons again to turn the sound back
on.
Press the MUTE button to set the Mute function
On/Off. The display disappears after 4 seconds.
Sound Menu
Sound Menu
icon
Approximate level of
the volume.
Remote Control Operation
For some frequently used operations, using the remote
control is advisable.
Just pressing one of the buttons enables you to make the
operation, and no need for calling up the On-Screen Menu.
Exit the Sound Menu.
Remote Control
COMPUTER/
VIDEO buttons
COMPUTER/VIDEO buttons
Press the COMPUTER or VIDEO button on the remote
control to select the input source. For more detail, see
pages 26, 37 and 38.
FREEZE button
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
✔ Note:
See the next page for the other buttons.
24
Basic Operation
AUTO PC button
Remote Control
Press the AUTO PC button on the remote control to
operate the Auto PC function. For more detail, see page
28.
VOLUME +/- buttons
(See p.24.)
KEYSTONE button
(See p.23)
D.ZOOM buttons
POINT ed buttons
Press the D.ZOOM buttons on the remote control to zoom
in and zoom out the images. For more detail, see page
36.
AUTO PC button
IMAGE button
NO SHOW button
P-TIMER button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When a projected
image is captured and set as "User" in the Logo selection
(p.48), the screen changes each time you press the NO
SHOW button as follows.
NO SHOW button
D.ZOOM buttons
black out ➜ the captured image ➜ normal ➜
S ee the previous page for the other
buttons.
•••••
LAMP CONTROL button
✔ Note:
KEYSTONE button
For detail, see page 23.
IMAGE button
Press the IMAGE button on the remote control to select
a desired image level of the screen. For more detail, see
pages 31 and 40.
The message disappears after 4 seconds.
P-TIMER button
Press the P-TIMER button on the remote control. The
timer display "00 : 00" appears on the screen and the timer
starts to count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press
the P-TIMER button again, then the P-timer display
disappears.
P-Timer display
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control
to select the lamp mode for changing the brightness of the
screen.
Normal. . . normal brightness
Auto. . . . . brightness according with the input signal
Eco........... l o w e r b r i g h t n e s s r e d u c e s t h e l a m p
power consumption and extends the
lamp life.
25
Computer Input
Input Source Selection
Direct Operation
Remote Control
COMPUTER button
Choose either RGB or Computer 2 by pressing the
COMPUTER button on the remote control. Before using
COMPUTER button, correct input source should be
selected through Menu operation as described below.
COMPUTER button
RGB
Computer 2 ✳
✳✳ See Notes at the bottom of this page.
Menu Operation
1
Input Menu
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to either Computer 1 or Computer 2, and then
press the SELECT button.
3
After the Source Select Menu appeared for Computer
1, move the pointer to RGB and then press the
SELECT button.
Input Menu icon
M ove t h e p o i n t e r ( r e d
arrow) to Computer 1 and
press the SELECT button.
Computer
1
Source Select Menu
Move the pointer to RGB
and press the SELECT
button.
Input Menu
M ove t h e p o i n t e r ( r e d
arrow) to Computer 2 and
press the SELECT button.
✔ Notes:
•When the Input Search function is set On1 or On2,
the input signal will be searched automatically (p.46)
•Computer 2 is not displayed when the COMPUTER
IN 2/MONITOR OUT terminal is set as Monitor out.
(p.50)
•Computer 2 (COMPUTER IN 2 / MONITOR OUT) can
accept only RGB signal.
26
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA,
WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal
source, this projector automatically detects the signal format and tunes to project a proper image without any
additional setting. (Signal formats provided in this projector is shown on page 70)
One of the following messages may appear when:
Auto
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The message "Auto" is displayed on the
PC System Menu icon and the Auto PC
Adjustment function works to display proper
images. If the image is not projected properly,
a manual adjustment is required. (p.29-30)
-----
There is no signal input from computer. Check
the connection between your computer and
the projector. (See "Troubleshooting" on pages
63-65.)
Mode 1
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
stored in Mode 1 ~ 5. (p.29-30)
SVGA 1
PC Systems provided in this projector is
chosen. The projector chooses a proper
system provided in the projector and displays it.
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC System Menu
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the PC System Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to the system that you want to set, and then
press the SELECT button.
The PC System Menu icon
Selected system is displayed.
Systems on this dialog
box can be selected.
Custom Mode (1 ~ 5) set in the
PC Adjust Menu. (p.30)
27
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and
Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.
Direct Operation
Remote Control
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control
unit.
Menu Operation
AUTO PC button
PC Adjust Menu
Auto PC Adj.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to PC Adjust Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to Auto PC Adj. item and then press the
SELECT button twice.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can
be memorized in this projector. Once parameters are
memorized, the setting can be done just by selecting Mode
in the PC System Menu (p.27). See "Store" on page 30.
✔ Notes:
•Fine sync, Total dots, Horizontal, and Vertical of some
computers cannot be fully adjusted with this Auto PC
Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required. (p.29-30)
•The Auto PC Adjustment cannot be operated when
480i, 575i, 480p, 575p, 720p,1035i, or 1080i is
selected in the PC System Menu. (p.27)
28
PC Adjust Menu icon
Move the red framed pointer to the
Auto PC Adj. item and press the
SELECT button.
"Please wait..." message appears
while Auto PC adjustment is in
process.
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this
projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal
formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted.
It allows you to recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the PC Adjust Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box. Press the Point 7 8 buttons to adjust the
value.
PC Adjust Menu
PC Adjust Menu icon
Move the red framed
pointer to an item and press
the SELECT button.
Fine sync
Eliminate flicker from the image displayed. Press the Point
7 8 buttons to adjust the value. (From 0 to 31.)
Total dots
Status (Stored/Free)
of the selected Mode.
Selected Mode
Adjust the number of total dots in one horizontal period.
Press the Point 7 8 buttons to adjust number to match
your PC image.
Horizontal
Press the Point 7 8 buttons to adjust the horizontal picture
position.
Vertical
Press the Point 7 8 buttons to adjust the vertical picture
position.
Press the Point 7 8
buttons to adjust the
value.
Press the SELECT
button at this item to
adjust other items.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Adjust clamp level. When the image has dark bars, try this
adjustment.
Press the SELECT button
at the Current mode item to
show the information of the
connected computer.
29
Computer Input
Display area H
Adjust the horizontal area displayed by this projector.
Press the Point 7 8 buttons to decrease/increase the
value.
Display area V
Adjust the vertical area displayed by this projector. Press
the Point 7 8 buttons to decrease/increase the value.
Reset
Move the red framed
pointer to an item and
press the SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box appears and then
select [Yes]. All adjustments return to their previous
figures.
This Mode has stored parameters.
Mode free
To clear adjusted data
To clear the stored data, move the red framed pointer to
the Mode free item and then press the SELECT button.
Move the red arrow pointer to the Mode that you want to
clear and then press the SELECT button.
Store
To store adjusted data, move the red framed pointer to the
Store item and then press the SELECT button. Move the
red arrow pointer to any of Mode 1 to 5 in which you want
to store and then press the SELECT button.
Quit
Vacant Mode
Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
To store adjusted data
Exit the PC Adjust Menu.
Close this dialog box.
✔ Note:
Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected in
the PC System Menu (p.27).
30
Computer Input
Image Level Selection
Direct Operation
Remote Control
Select an image level among Dynamic, Standard, Real,
Blackboard (Green), Colorboard, Image 1, Image 2, Image
3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
Picture level suitable for viewing picture in a bright room.
IMAGE button
IMAGE button
Dynamic
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. This mode assists to enhance the image
projected on a blackboard. This is mainly effective on a
green colored board, not truly effective on a black colored
board.
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Standard
Real
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
Image 1 ~ 4
User preset image in the Image Adjust Menu. (p.34)
31
Computer Input
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Select Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the level that you want to set and then press
the SELECT button.
Dynamic
Image Select Menu icon
Image Select Menu
Move the red framed
pointer to the level and
press the SELECT button.
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. See above for further description.
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors. Press the SELECT button
to choose the color.
Image 1 ~ 4
User preset image in the Image Adjust Menu. (p.34)
32
The level being selected.
Computer Input
Image Level Adjustment
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Adjust Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to adjust, and then
press the SELECT button. The level of each item is
displayed. Adjust each level by pressing the Point 7 8
buttons.
Image Adjust Menu
Image Adjust Menu icon
Move the red framed
pointer to the item to be
selected and then press
the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast and the
Point 8 button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust the image darker and
the Point 8 button to adjust the image brighter. (From 0 to
63.)
Selected Image level
Color temp.
Press the Point 7 button or the Point 8 button for Color
temp. level that you want to select. (XLow, Low, Mid, or
High)
Press the Point 7 8
buttons to adjust the
value.
White balance (Red)
Press the Point 7 button to lighten the red tone and the
Point 8 button to deepen the red tone. (From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten the green tone and the
Point 8 button to deepen the green tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten the blue tone and the
Point 8 button to deepen the blue tone. (From 0 to 63.)
Sharpness
Press the Point 7 button to soften the image and the Point
8 button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8 buttons to obtain better balance of
contrast. (From 0 to 15.)
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box appears and then
select [Yes]. All adjustments returns to their previous
figures.
✔ Note:
After adjusting any of the White balance
Red, Green, or Blue, the Color temp
changes to "Adj.".
33
Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point ed buttons and press the SELECT button. A
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in the
Image Level Selection on page 31.
Move the red framed
pointer to any of
Image 1 to 4 where
you want to set
and then press the
SELECT button.
Quit
Exit the Image Adjust Menu.
Screen Size Adjustment
Store item
Press the SELECT
button at this
item to store the
adjusted data.
The confirmation
box appears,
then select [Yes].
This projector has the picture screen resize function, which
enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Screen Menu icon.
2
Press the Point ed buttons and move the red framed
pointer to the function that you want to select and then
press the SELECT button.
Screen Menu
Screen Menu icon
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768 ),
this projector enters panning mode automatically. Pan the
image with Point ed 7 8 buttons. When adjusted, the
arrows turn red. When reached to the correction limit, the
arrows disappear.
✔ Notes:
•This Screen Menu, except for "Normal" and "Custom",
cannot be operated when 720p(HDTV), 1035i (HDTV),
or 1080i (HDTV) is selected in the PC System Menu
(p.27).
•The projector cannot display any resolution higher
than 1600x1200. If your computer’s screen resolution
is higher than it, reset the resolution to the lower
before connecting to the projector.
•The image data in other than XGA (1024x768) is
modified to fit the screen size in initial mode.
•True, Full, and Digital zoom +/– cannot be selected
when 480i, 575i, 480p, or 575p is selected in the PC
System Menu (p.27).
34
Move the red framed pointer
to the function and press the
SELECT button.
Computer Input
Wide
Provide the image to fit wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16:9.
Full
Provide the full screen image.
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom" is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V...................Adjust the Horizontal/Vertical
screen scale.
H&V............................When set to "On", the aspect ratio
is fixed. The "Scale V" appears
dimmed and becomes unavailable.
Adjust the "Scale H", then the
screen scale is automatically
modified based on the aspect
ratio.
Position H/V............... Adjust the Horizontal/Vertical
screen position.
Common....................Save the adjusted scale to all
the inputs. Press the SELECT
button at Common to display a
confirmation box. To save the
scale, press the SELECT button at
"Yes", When Custom is selected,
the saved scale is used.
Reset..........................Reset the all adjusted values.
Press the SELECT button at
Reset to display a confirmation
box. To reset, press the SELECT
button at "Yes".
Press the SELECT button at
Common or Reset, to display
a confirmation box.
✔ Notes:
• When no signal is detected, "Normal" is set
automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V
is limited depending on the input signal.
35
Computer Input
For zooming in and out the images
Digital zoom +
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message "D. zoom +" is displayed.
Press the SELECT button to expand the image size. And
press the Point ed 7 8 buttons to pan the image. The
Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM e button on the remote control.
Digital zoom –
When Digital zoom – is selected, the On-Screen Menu
disappears and the message "D. zoom –" is displayed.
Press the SELECT button to compress image size.
A projected image can be also compressed by pressing
the D.ZOOM d button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM ed buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment or select an input source
from the Input Source Selection (p.26) again, or adjust the
screen size with the D.ZOOM ed buttons.
✔ Notes:
•The panning function may not operate properly if the
stored Mode in the PC Adjust Menu is used. (p.30)
•The minimum compression ratio can be limited
depending on the input signal or when the Keystone
function is working or when the Custom is selected for
the screen size.
• True, Full, and Digital zoom +/– cannot be selected
when 480i, 575i, 480p, or 575p is selected in the PC
System Menu (p.27).
•Digital zoom +/- cannot be selected when Full or True
is selected.
36
Remote Control
POINT buttons
SELECT button
D.ZOOM + button
D.ZOOM - button
Video Input
Input Source Selection (Video)
Direct Operation
Remote Control
VIDEO button
Choose Video by pressing the VIDEO button on the
remote control.
Video
Input Menu icon
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to Video and then press the SELECT button.
Input Menu
Move the pointer to
Video and press the
SELECT button.
✔ Note:
When the Input Search function is set On1 or On2,
the input signal will be searched automatically (p.46)
37
Video Input
Input Source Selection (S-video, Component, RGB Scart 21-pin)
Direct Operation
Choose S-video, Component or RGB(Scart) by pressing
the COMPUTER button on the remote control.
Before using COMPUTER button, correct input source
should be selected through Menu operation as described
below.
Remote Control
COMPUTER button
COMPUTER button
✔ Note:
S-video
The operations in the figure are processed when the
Input Search function is set to "Off".
✳
Computer 2
Component
✳
Computer 2
RGB(Scart)
✳
Computer 2
✳ See Notes at the bottom of this page.
Menu Operation
1
Input Menu
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to Computer 1 and then press the SELECT
button.
3
After the Source Select Menu appeared for Computer
1, move the pointer to S-video, Component or RGB
(Scart) and then press the SELECT button.
S-video
When S-video input signal is connected
to the COMPUTER IN 1/S-VIDEO IN/
COMPONENT IN jack with a S-VIDEOVGA cable, select S-video.
Component
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with
a C o m p o n e n t - VG A C a bl e, s e l e c t
Component.
RGB (Scart)
38
When the input source is coming
from video equipment connected to
the COMPUTER IN 1/S-VIDEO IN/
COMPONENT IN terminal with a ScartVGA Cable, select RGB (Scart).
Input Menu icon
M ove t h e p o i n t e r ( r e d
arrow) to Computer 1 and
press the SELECT button.
Computer
1
Source Select Menu
Move the pointer to
S-video, Component or
RGB (Scart) and press the
SELECT button.
✔ Notes:
•W h e n t h e C O M P U T E R bu t t o n i s
pressed while the Input search function
is set to "On1" or "On2", the input
signal will be searched automatically
(p.46)
•When Monitor out is selected in the
Terminal function (p.50), Computer 2 is
not displayed.
Video Input
Video System Selection
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the AV System Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to the system that you want to select and then
press the SELECT button.
Video or S-video
Auto
The projector automatically detects incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, it
is necessary to select a specific broadcast signal format
among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and
PAL-N.
Component
AV System Menu (Video or S-video)
AV System Menu icon Selected system is displayed.
Move the pointer to a
system and press the
SELECT button.
AV System Menu (Component)
Auto
The projector automatically detects incoming video signal,
and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it
is necessary to select a specific component video signal
format among 480i, 575i, 480p, 575p, 720p, 1035i, and
1080i.
AV System Menu icon Selected system is displayed.
Move the pointer to a
system and press the
SELECT button.
✔ Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
39
Video Input
Image Level Selection
Direct Operation
Remote Control
Select an image level among Dynamic, Standard, Cinema,
Blackboard (Green), Colorboard, Image 1, Image 2, Image
3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
IMAGE button
IMAGE button
Dynamic
Standard
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1 ~ 4
User preset image in the Image Adjust Menu (p.43).
40
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
Video Input
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Select Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the level that you want to set and then press
the SELECT button.
Dynamic
Image Select Menu icon
Image Select Menu
Move the red framed
pointer to the level and
press the SELECT button.
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
The level being selected.
Picture level with improved halftone for graphics.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. See above for further description.
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the
wall color from the preset four colors. Press the SELECT
button to choose the color.
Image 1 ~ 4
User preset image in the Image Adjust Menu. (p.43)
41
Video Input
Image Level Adjustment
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Adjust Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to adjust, and then
press the SELECT button. The level of each item is
displayed. Adjust each level by pressing the Point 7 8
buttons.
Image Adjust Menu
Image Adjust Menu icon
Move the red framed
pointer to the item to be
selected and then press
the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast and the
Point 8 button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust the image darker and
the Point 8 button to adjust the image brighter. (From 0 to
63.)
Color
Press the Point 7 button to lighten the color and the Point
8 button to deepen the color. (From 0 to 63.)
Tint
Press the Point 7 8 buttons to obtain a proper color.
(From 0 to 63.)
Color temp.
Press the Point 7 8
buttons to adjust the
value.
Press the SELECT
button at this item to
display other items.
Press the Point 7 button or the Point 8 button for Color
temp. level that you want to select. (XLow, Low, Mid, or
High)
White balance (Red)
Press the Point 7 button to lighten the red tone and the
Point 8 button to deepen the red tone. (From 0 to 63.)
White balance (Green)
Press the SELECT
button at this item to
display previous items.
Press the Point 7 button to lighten the green tone and the
Point 8 button to deepen the green tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten the blue tone and the
Point 8 button to deepen the blue tone. (From 0 to 63.)
✔ Notes:
•The Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N.
•After adjusting any of the White balance Red, Green, or Blue, the Color temp. changes to "Adj.".
42
Video Input
Sharpness
Press the Point 7 button to soften the image and the Point
8 button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8 buttons to obtain better balance of
contrast. (From 0 to 15.)
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following to get smoother images.
Off . . . . disabled.
L1 . . . . lower reduction
L2 . . . . higher reduction
Progressive
Interlaced video signal can be displayed in a progressive
picture. Select one of the following.
Off . . . . disabled.
L1 . . . . Select "L1" for an active picture.
L2 . . . . Select "L2" for a still picture.
Film . . . Select "Film" for watching a film. With this
function, the projector reproduces pictures
faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box appears and then
select [Yes]. All adjustments returns to their previous
figures.
Store
Store item
Image Level Menu
Move the red framed pointer
to an image item to be set
and then press the SELECT
button.
T h e c o n f i r m a t i o n b ox
appears and then select
[Yes].
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point ed buttons and press the SELECT button. A
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in the
Image Level Selection on page 40.
Quit
Exit the Image Adjust Menu.
✔ Note:
Noise reduction and Progressive cannot be selected
when 480p, 575p, 720p, 1035i, or 1080i is selected.
(p.39)
43
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Screen Menu icon.
2
Press the Point ed buttons and move the red framed
pointer to the function that you want to select and then
press the SELECT button.
Normal
Provide the image at a normal video aspect ratio of 4:3.
Screen Menu
Screen Menu icon
Move the red framed pointer to a
function and press the SELECT
button.
Wide
Provide the image at a wide screen ratio of 16:9.
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom" is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V...................Adjust the Horizontal/Vertical
screen scale.
H&V............................When set to "On", the aspect ratio
is fixed. The "Scale V" appears
dimmed and becomes unavailable.
Adjust the "Scale H", then the
screen scale is automatically
modified based on the aspect
ratio.
Position H/V...............Adjust the Horizontal/Vertical
screen position.
Common....................Save the adjusted scale to all
the inputs. Press the SELECT
button at Common to display a
confirmation box. To save the
scale, press the SELECT button at
"Yes". When Custom is selected,
the saved scale is used.
Reset..........................Reset the all adjusted values.
Press the SELECT button at
Reset to display a confirmation
box. To reset, press the SELECT
button at "Yes".
Press the SELECT
button at Common
or Reset, to display a
confirmation box.
✔ Notes:
• Wide cannot be operated when 720p,
1035i, or 1080i is selected in the AV
System Menu (p.39).
• When no signal is detected, "Normal" is
set automatically and the Aspect dialog
box disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
44
Setting
Setting
This projector has Setting menu that allows you to set up
the other various functions described as follows:
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Setting Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to set and then press
the SELECT button. The Setting dialog box appears.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, or Japanese.
Setting Menu (Language)
Setting Menu icon
Set the red framed pointer
to the item and press the
SELECT button.
Press the SELECT
button at Language
item, the Language
Menu appears.
See the next pages for other items.
Press the SELECT
button at this item
to display the other
languages.
45
Setting
Auto setup
This function enables Input search, Auto Keystone
correction and Auto PC adjustment by pressing the AUTO
SETUP button on the top control. Settings for those
functions can be altered as follows:
Input search ✳
This function detects the input signal automatically. When
finding a signal, the search will stop. Use the Point 7 8
buttons to select one of the following.
Off . . . . . Input search does not work.
On1 . . . . Input search works under the situation below.
• When pressing the AUTO SETUP button on the top
control.
• When pressing the COMPUTER button or VIDEO
button on the remote control.
On2 . . . . Input search works under the situation below.
• When turning on the projector with pressing the
POWER ON/STAND-BY button on the top control or
on the remote control.
• When pressing the AUTO SETUP button on the top
control.
• W hen pressing the COMPUTER button or VIDEO
button on the remote control.
• When missing the current input signal.
✳
• If the No show or Freeze function is active, cancel it to
activate the Input search. It is also unavailable when
On-Screen menu is displayed.
•While Input Search is set On1 or On2, the status of
Input and Lamp mode are displayed every time the
signal is switched.
•The signal input from S-VIDEO can not be detected.
• If any of the COMPUTER or VIDEO button on the
remote control, or AUTO SETUP button on the top
control is pressed while Input search is on, Input
search will stop.
Auto PC Adj.
On . . . . . Enables Auto PC Adjustment when pressing
. the AUTO SETUP button on the top control.
Off . . . . . Disables Auto PC Adjustment.
Auto Keystone
Auto . . . . Always works and corrects keystone distortion
according to the projector's tilt.
Manual . . Works only when pressing the AUTO SETUP
button on the top control.
Off . . . . . Disables Auto Keystone.
46
Select Auto setup
and this box appears.
Choose the desired
setting for Input search,
Auto keystone and Auto
PC adj. with the Point 7
8 buttons.
✔ Notes:
•Input search, Auto PC Adj. and Auto
Keystone cannot be set "Off" at the
same time.
•Auto Keystone adjusts automatically
by pressing the AUTO SETUP button
either it is set on "Auto" or "Manual" in
setting menu.
•Au t o Ke y s t o n e c o r r e c t s ve r t i c a l
distortion only, not correct horizontal
distortion.
•The Auto Keystone cannot work when
Ceiling feature is set "On" in the Setting
menu (p.50).
•Pe r fe c t c o r r e c t i o n o f t h e i m a g e
distortion cannot be ensured with the
Auto setup function. If the distortion is
not corrected properly by pressing the
AUTO SETUP button, adjust manually
by pressing the KEYSTONE button
on the remote control or selecting
Keystone in the Setting menu (p.23,
47).
•Fine sync, Total dots, Horizontal and
Vertical position of some computers
cannot be fully adjusted with the Auto
PC Adjustment function. When the
image is not provided properly with
this operation, manual adjustments are
required (p.29–30).
Setting
Keystone
This function corrects distortion of a projected image.
Select either Store or Reset with the Point 7 8 buttons,
and then press the SELECT button. The keystone dialog
box appears. Correct keystone with the Point ed buttons.
(p.23)
Store . . . . . store the keystone correction even when the
AC power cord is unplugged.
Reset . . . . . reset the keystone correction when the AC
power cord is unplugged.
Blue back
Press the Point 7 8 buttons to switch On/Off. When this
function is "On", a blue image is displayed while the input
signal is not detected.
Display
Press the Point 7 8 buttons to switch On/Off. This function
decides to display On-Screen Displays.
On . . . . . . . . . . . . . Show all the On-Screen Displays.
Use this function when you want
to project images after the lamp
becomes bright enough. Factory
default setting is this mode.
Countdown off . . . . Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off . . . . . . . . . . . . . Do not show On-Screen Displays,
except;
●On-Screen Menu
●"Power off?" message
●P-Timer
●"No signal" message for Power management item
(p.51)
●"Please wait..." message
●Arrows for panning mode in the Screen Menu (p.34)
47
Setting
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with
Logo select, Capture, and Logo PIN code lock functions.
✔ Note:
When On is selected in Logo PIN code lock function,
Logo select and Capture functions cannot be
selected.
Logo select
Logo select
This function decides the start-up display as follows:
User . . . . the image you captured
Default . . the factory-set logo
Off . . . . . . countdown only
Capture
This function enables you to capture the image being
projected and use it for a start-up display or interval of
presentations.
After capturing the projected image, go to the Logo
select function and set it to "User". Then the captured
image is displayed when turning on the projector next
time or pressing the NO SHOW button. (p.25)
To capture the image, select [Yes]. To cancel the
Capture function, select [No].
Capture
✔ Notes:
•Before capturing an image, select Standard in the
Image Select Menu to capture a proper image.
(p.32, 40.)
•A signal from a computer can be captured up to
XGA (1024x768). A signal from video equipment
can be captured except for 720p, 1035i, and 1080i.
•When capturing the image that has been adjusted
by the Keystone function, the adjustment data is
automatically reset and the projector captures an
image without keystone adjustment.
•When the Logo PIN code lock function is "On",
Capture menu cannot be selected.
•When star ting to capture a new image, the
previously stored image is cleared even if you
cancel the capturing.
•"User" cannot be selected when the image is not
captured.
48
Select [Yes] to capture the
projected image.
Select [Yes] to stop
capturing.
Setting
Logo PIN code lock
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off . . . . . . the screen logo can be changed freely from
the Logo select menu. (p.48)
On . . . . . . the screen logo cannot be changed without
the Logo PIN code.
If you want to change the Logo PIN code lock setting,
enter a Logo PIN code along the following steps. The
initial Logo PIN code is set "4321" at the factory.
To Enter the Logo PIN code
Select a number by pressing the Point 54 buttons. And
then press the Point button to fix the number and move
the pointer. The number changes to "✳". If you fixed
an incorrect number, move the pointer to the number
you want to correct by pressing the Point button, and
then select the correct number by pressing the Point 54
buttons.
Logo PIN code lock Dialog Box
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point button. Press the SELECT
button so that you can change the Logo PIN code lock
setting.
If you entered an incorrect Logo PIN code, "Logo PIN
code" and the number (✳✳✳✳) turns red. Enter a correct
Logo PIN code all over again.
To Change the Logo PIN code
After a correct Logo PIN code is entered, the
following dialog box appears.
Select On/Off by pressing the Point buttons or
change the Logo PIN code.
Logo PIN code can be changed to your desired four-digit
number. Select "Logo PIN code change" with the Point 4
button and press the SELECT button. Set a new Logo PIN
code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to relevant instructions of the PIN code lock
function on pages 53 and 54.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO. MEMO ON PAGE 74, AND
KEEP IT SECURELY. SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO
LONGER BE OPERATED.
49
Setting
Ceiling
Ceiling
When this function is "On", the picture is top/bottom and
left/right reversed. This function is used to project the
image from a ceiling mounting the projector.
Rear
When this function is "On", the picture is left/right reversed.
This function is used to project the image to a rear
projection screen.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the
back of the projector is switchable for computer input
or monitor output. (See page 9) Select Computer 2 or
Monitor Out with the Point 7 8 buttons.
Computer 2 . . . . . . computer input
Monitor Out . . . . . . monitor out
Terminal function is not available when selecting Computer
2 to the input source. Change the input source to the
others (Computer1 or Video) so that the Terminal function
will be available. (p.26, 37, 38)
Standby mode
This function is available when the projector is turned off
and in Stand-by. It is recommended to use Eco under
normal condition.
Normal . . . . . . . . . n o r m a l p ow e r c o n s u m p t i o n i n
Stand-by condition.
Eco . . . . . . . . . . . . lower power consumption than
Normal mode in Stand-by condition.
50
Rear
Setting
Power management
For reducing power consumption as well as maintaining
the lamp life, the Power management function turns off the
projection lamp when the projector is not used for a certain
period.
When the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display with
"No signal" appears. The countdown starts to turn off the
lamp.
Power management
Time left before Lamp is off.
Select one of the operations:
Ready. . . . . . . . When the lamp has been fully cooled
down, the POWER indicator changes
to green blinking. In this condition, the
projection lamp is turned on if the input
signal is reconnected or any button
on the top control or remote control is
pressed.
Shut down . . . . When the lamp has been fully cooled
down, the power is turned off.
Off . . . . . . . . . . Power management function is off.
Press the SELECT button
at Power management and
this box appears. Choose
one of three settings with
the Point buttons, and
go to the timer with the
Point 54 buttons and set
time with the Point buttons.
Then set the countdown timer with the Point buttons.
✔ Note:
Factory default is " Ready, 5 min".
On start
On start
When this function is "On", the projector is automatically
turned on just by connecting the AC power cord to a wall
outlet.
✔ Note:
Be sure to turn the projector off properly (see "Turning
Off the Projector" on page 20). If the projector is
turned off in the incorrect sequence, the On start
function does not operate properly.
51
Setting
Lamp control
This function allows you to change brightness of the
screen.
Normal . . . . . normal brightness
Auto . . . . . . . brightness according with the input
signal
Eco��������������� lower brightness reduces the lamp
power consumption and extends the
lamp life.
✔ Note:
Lamp mode cannot be changed for a while after
turning on the projector. Lamp needs some time to
stabilize after the power is turned on. Stored lamp
mode will be active after the lamp is stabilized.
Remote control
This projector provides two different remote control codes:
the factory-set initial code (Code 1) and the secondary
code (Code 2). This switching function prevents remote
control interference when operating several projectors or
video equipment at the same time.
When operating the projector in "Code 2", both the
projector and the remote control must be switched to
"Code 2".
To change the code for the projector:
Select either "Code 1" or "Code 2" in this Setting Menu.
To change the code for the remote control:
Press and hold both the MENU and IMAGE buttons
together for 5 seconds or more. After changing the code,
make sure the remote control operates properly.
✔ Note:
If the batteries are removed from the remote control
for a long period of time, the remote control code will
be reset.
52
Remote control
Press and hold
MENU and IMAGE
buttons for more
than 5 seconds.
Setting
Security (Key lock and PIN code lock settings)
Key lock
This function allows you to use Key lock and PIN code lock
function to set the security for the projector operation.
Key lock
This function locks operation of the top control or the
remote control.
It is useful to prevent operation by an unauthorized
person.
. . . . . . not locked.
. . . . . . lock the operation of the top
control. To unlock, use the
remote control.
. . . . . . lock the operation of the remote
control. To unlock, use the top
control.
Select Key lock. Choose one of
the alternatives with the Point
54 buttons and select [Yes] to
activate it.
If the top control accidentally becomes locked and you
do not have the remote control or there is something
wrong with your remote control, contact the dealer
where you purchased the projector or the service
center.
PIN code lock
This function prevents the projector from being
operated by an unauthorized person and provides the
following settings for security options.
PIN code lock
Off . . . . . the projector is not locked with a PIN code.
On1 . . . . require to enter a PIN code every time
turning on the projector.
On2 . . . . require to enter a PIN code to operate
the projector once the power cord is
disconnected; as long as the AC power
cord is connected, the projector can be
operated without a PIN code.
Whenever to change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. The "1234" is set as the initial PIN
code at the factory.
When the projector is locked
with the PIN code, the PIN
code lock mark appears on the
menu bar.
53
Setting
To Enter the PIN code
Enter a PIN code
Select a number by pressing the Point ed buttons. And
then press the Point 8 button to fix the number and move
the pointer. The number changes to "✳". If you fixed an
incorrect number, move the pointer to the number you want
to correct by pressing the Point 7 button, and then select
the correct number by pressing the Point ed buttons.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point 8 button. Press the SELECT
button so that you can change the following PIN code lock
settings.
If you entered an incorrect PIN code, "PIN code" and the
number (✳✳✳✳) turns red. Enter a correct PIN code all
over again.
The input numbers change to "✳
" for security.
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point 7 8 buttons and
then move the red framed pointer to "Quit" with the Point d
button. Press the SELECT button to close the dialog box.
To Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Move the pointer to "Set" by pressing
the Point 8 button. And then press the
SELECT button.
Change the PIN code lock setting
Select "PIN code change" with the Point d button, and
press the SELECT button to display the New PIN code
input dialog box.
Select a number by pressing the Point ed buttons. And
then press the Point 8 button to fix the number and move
the pointer. Repeat it to complete entering a four-digit
number. After entering the four-digit number, move the
pointer to "Set" by pressing the Point 8 button. Then press
the SELECT button.
caution:
when you have changed THE PIn code, write
down the new pin code in column of the
pin code no. memo on page 74, and keep it
securely. If you forget your PIN code, the
projector can no longer be started.
Select a desired setting with the
Point 7 8 buttons.
Change the PIN code
Select PIN code change and press
the SELECT button. The New
PIN code input dialog box appears.
The input numbers are being
displayed for confirmation.
54
Setting
Fan
This function provides the following alternatives in the
cooling fans' operation after turning off the projector. (p.20)
L1 . . . . . . normal operation
L2 . . . . . . slower and lower-sound than the normal
operation (L1), but it takes longer to cool the
projector down.
✔ Note:
Setting “Fan control” to On1 or On2 affects L2
operation in “Fan.”
Fan control
Fan control
This projector provides Fan control function in the Setting
menu.
Choose the running speed of cooling fans from the
following options according to the ground elevation under
which you use the projector.
Off................ Normal speed. Set this function to “Off” when
using the projector in non-high altitude
environment.
On 1............. Faster than Off mode. Select this mode
when using the projector in high altitudes
(about 1,200 meters or more above the sea
level) where the fans have less cooling
effect.
On 2............. Faster than On 1 mode. Select this mode
when using the projector in higher altitudes
than above where the fans have lesser
cooling effect.
✔ Note:
• The fan noise becomes louder in On 1 and On2.
• Failure to set the running speed of cooling fans
properly may affect the projector life.
55
Setting
Closed Caption
Closed Caption
Closed Caption is a function that displays the audio portion
of a TV program as text on the screen.If the input signal
contains closed captions, you can turn on the feature and
switch the channels. Press the Point buttons to select
CC1, CC2, CC3 or CC4.
If the closed caption is not clear, you can change the text
from Color to White.
✔ Notes:
The Closed Caption is available only under the
situation below.
• When the input signal is NTSC of composite and
S-VIDEO, and the system is set according to the
signal or set on "Auto".
• The system must be set on NTSC or Auto in Video
System Selection. (P.39)
• The icon of Closed Caption is displayed in gray
while it is not available.
• The closed caption is unavailable when On-Screen
menu and P-Timer are displayed.
Lamp counter
This function is used to reset the lamp replacement
counter. When replacing the projection lamp, reset the
lamp replacement counter by using this function. See
page 62 for operation.
Factory default
✔ Note:
Do not reset the Lamp replacement counter without
implementation of lamp replacement. Be sure to
reset the Lamp replacement counter only after
replacing the lamp.
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, and the lamp
counter to the factory default settings.
Quit
Exit the Setting Menu.
56
Select [Yes] to
activate it.
Maintenance and Cleaning
Warning indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance.
T h e projector is shut dow n a n d t h e WA R N I N G
indicator is blinking red.
Top Control
When the temperature inside the projector reaches a
certain level, the projector is automatically shut down to
protect the inside of the projector. The POWER indicator
is blinking while the projector is being cooled down. When
the projector has cooled down sufficiently (to its normal
operating temperature), it can be turned on again by
pressing the POWER ON/STAND-BY button.
WARNING
blinking red
✔ Note:
After the temperature inside the projector returns
to normal, the WARNING indicator still continues
to blink. When the projector is turned on again, the
WARNING indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to
be ventilated? Check the installing condition to see if
ventilation slots are not blocked.
– Is the projector not installed near the ventilation duct of
air-conditioning equipment which may be hot? Install
the projector away from the ventilation duct of airconditioning equipment.
– Is the air filter clean? Clean the air filter periodically.
(p.58)
T h e projector is shut dow n a n d t h e WA R N I N G
indicator emits a red light.
When the projector detects an abnormal condition, it is
automatically shut down to protect the inside and the
WARNING indicator becomes red. In this case, disconnect
the AC power cord and reconnect it, and then turn the
projector on once again for check. If the projector cannot
be turned on and the WARNING indicator emits a red light,
disconnect the AC power cord and contact the service
station for check and repair.
Top Control
WARNING
lights red
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER THE
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.
57
Maintenance and Cleaning
Cleaning the Air Filter
Air filter prevent dust from accumulating on the optical elements inside the projector. Should the air filter
become clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat
build up and adversely affect the life of the projector. Clean the air filter following the steps below.
1
Turn off the projector, and disconnect the AC power
cord from the AC outlet.
2
Remove the air filter by pulling the latch horizontally.
3
Clean the air filter with a brush or rinse it softly.
4
When cleaning the air filter by rinsing, dry it well.
Replace the air filter properly. Make sure that the air
filter is fully inserted.
CAUTION
Do not operate the projector with the air filter
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put anything into the air intake vent. It may
result in malfunction of the projector.
Air filter
Pull horizontally and remove.
RECOMMENDATION
We recommend avoiding dusty/smoky
environments when operating the projector. Usage
in these environments may cause a poor image
quality.
When using the projector under dusty or smoky
conditions, dust may accumulate on a lens, LCD
panels, or optical elements inside the projector. This
condition may degrade the quality of a projected image.
When the symptoms above are noticed, contact your
authorized dealer or service station for proper cleaning.
Attaching the Lens Cover
When moving this projector or while not using it over an
extended period of time, replace the lens cover.
A t t a c h t h e l e n s c ove r a c c o r d i n g t o t h e fo l l ow i n g
procedures.
1
2
Pass the string through a hole of the lens cover.
3
Attach the string with lens cover to the filter cover at
the bottom of the projector.
Turn over the projector.
58
Lens Cover
String for the lens cover.
Maintenance and Cleaning
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projection lens with a cleaning
cloth that contains a small amount of non-abrasive
camera lens cleaner, or use lens cleaning paper or
a commercially available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvent, or other harsh chemicals might
scratch the surface.
3
When the projector is not in use, replace the lens
cover.
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projector body with a soft, dry cleaning
cloth. When it is heavily soiled, use a small amount of
mild detergent and finish with a soft, dry cleaning cloth.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvent, or other harsh chemicals might
scratch the surface.
3
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.
59
Maintenance and Cleaning
Lamp Replacement
When the life of the projection lamp of this projector draws
to an end, the LAMP REPLACE indicator emits a yellow
light. If this indicator lights yellow, replace the lamp with a
new one promptly.
Top Control
This indicator is yellow
when the life of the
projection lamp draws to
an end.
CAUTION
Allow a projector to cool, for at least 45 minutes before you open the Lamp cover. The inside of the
projector can become very hot.
CAUTION
For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass
bulb! The glass can shatter and may cause injury.
CAUTION
When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may
be broken.
If replacing the lamp of a projector which has been installed on the ceiling, you should always
assume that the lamp is broken, and you should stand to the side of the lamp cover, not underneath
it. Remove the lamp cover gently. Small pieces of glass may fall out when the lamp cover is opened. If
pieces of glass get into your eyes or mouth, seek medical advice immediately.
Refer to the next page for replacing a lamp.
60
Maintenance and Cleaning
Follow these steps to replace the lamp.
Lamp Cover
1
Turn off the projector and disconnect the AC power
cord. Allow the projector to cool for at least 45
minutes.
2
Loosen the screw with a screwdriver, slide and open
the lamp cover.
3
Loosen 3 screws of the lamp with a screwdriver and
pull out the lamp upwards vertically by grasping the
handles.
4
Replace the lamp with a new one and tighten the 3
screws back into position. Make sure that the lamp is
set properly. Replace the lamp cover and tighten the
screw.
5
Connect the AC power cord to the projector and turn
on the projector.
6
Reset the lamp replacement counter.
See "Resetting the Lamp Counter" on the next page .
Screw
Handles
Screw
Screw
Screw
Lamp
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give
the following information to the dealer.
●Model No. of your projector
●Replacement Lamp Type No.
:LC-XD25
:POA-LMP129
(Service Parts No. 610 341 7493)
61
Maintenance and Cleaning
Resetting the Lamp Counter
Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement
counter is reset, the LAMP REPLACE indicator stops lighting.
1
Turn the projector on, press the MENU button to
display the On-Screen Menu. Press the Point buttons to move the red framed pointer to the Setting
Menu icon.
2
Press the Point 54 buttons to move the red framed
pointer to the Lamp counter function and then press
the SELECT button. The first dialog box appears and
shows the total accumulated time of the lamp usage
and the reset option. If you select "Reset", a "Lamp
replacement counter Reset?" message appears.
Select [Yes] to continue.
3
Another confirmation dialog box appears, select [Yes]
to reset the Lamp replacement counter.
To reset the lamp counter, move the
pointer to Reset and then press the
SELECT button. “Lamp replacement
counter Reset?” dialog box is displayed.
✔ Note:
Do not reset the Lamp replacement counter without
implementation of lamp replacement. Be sure to reset
the Lamp replacement counter only after replacing the
lamp.
Select [Yes] again
to reset the lamp
counter.
Select [Yes],
then another
confirmation
box appears.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the
same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar
lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up,
replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the
instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP
REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime
draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector
and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector's AC plug from the AC outlet immediately. Contact an authorized
service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that
there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation
holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector
except those who are authorized trained technicians and who are familiar with projector service. Inappropriate
attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in
an accident or injury caused by pieces of broken glass.
62
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described on
pages15-17.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the computer.
Problem
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait until the POWER indicator stops blinking to turn on the
projector again. The projector can be turned on after the POWER
indicator turns red. (See page 20)
– Check the WARNING indicator. If the WARNING indicator lights
red, the projector cannot be turned on. (See page 57)
– Check the projection lamp. (See page 60)
– Unlock the Key lock function. (See page 53)
The initial display is not shown.
– Make sure "Off" or "Countdown off" are not chosen at display
function.(see page 47)
The initial display is not same as
– Make sure "User" or "Off" are not chosen at Logo (select) as the
default set. (see page 48)
the default set.
Input signal switches
automatically. (or does not
switch automatically)
– Make sure Input search function is adjusted properly. (See page
46)
Image is out of focus
– Adjust the focus of the projector. (See page 23)
– Provide proper distance between the projector and the projection
screen. (See page 13)
– Check the projection lens to see if it needs cleaning. (See page 59)
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. If this occurs, leave
the projector off and wait until condensation evaporates.
No image
– Check the connection between your computer or video equipment
and the projector. (See pages 15-17)
– See if the input signal is correctly output from your computer. For
some laptop computers, you may need to change the setting for the
monitor output when connecting to a projector. See your computer’s
instruction manual for the setting.
– It takes about 30 seconds to display an image after turning on
the projector. See if the selected system is corresponding to your
computer or video equipment. (See pages 27 and 39)
– Select a correct input source once again through menu operation.
(See pages 26, 37 and 38)
– Make sure the temperature is not out of the specified operating
temperature (41°F ~ 95°F (5°C ~ 35°C)).
63
Appendix
Image is Left/Right reversed
Image is Top/Bottom reversed
– Check the Ceiling/Rear function. (See page 50)
– Check the Ceiling function. (See page 50)
No sound
– Check audio cable connections from the audio input source.
– Adjust the audio source.
– Press the VOLUME + button. (See page 24)
– Press the MUTE button. (See page 24)
– Is the image projected? You will hear the sound only when the
image is projected.
The color is strange.
– Check the Input signal, color system,video system or computer
system mode.
– Make sure the "Blackboard" or "Colorboard" is not selected on
Image select menu. (see pages 31, 32, 40, 41)
Some displays are not seen
during operations
– Check the Display item. (See page 47)
Auto PC adjustment function
does not work.
– Check the Input signal. Auto PC function can not work when
480p,575p.720p,480i,575i,1035i or 1080i is selected. (see Page 28)
The setting does not remain after
turning off power.
– Make sure you selected "Store" after adjusting setting. Some
settings can not be stored if not registered with "Store". (see pages
30, 43)
Power management does not
work.
– Power management function can not work while "Freeze" or "No
Show" function is running. (see pages 24, 25)
Capture function does not work.
– Check the connection and the input signal to see if there is signal.
Auto setup does not work
properly.
– Make sure "Off" is not selected at any function of "Auto setup". (see
page 46)
– Make sure "On" is not selected at the Ceiling function.(see page
50)
Auto keystone does not work
properly even when the projector
is tipped.
– Make sure the Auto keystone function is not set to "Manual". Press
the AUTO SETUP button on the top control.(see page 23, 46)
The image is distorted or runs
off.
PIN code dialog box appears at
the start-up
– Check PC adjustment menu or Screen menu and adjust them.
(see pages 29-30, 34-35)
– PIN code lock is being set. Input a PIN code (1234 or numbers you
have set). (See pages 19, 53 and 54)
Computer 2 cannot be selected
– Select Computer 2 at the Terminal function. (See page 50)
The Terminal function cannot be
– The Terminal function cannot be selected after Computer 2 is
selected. Select other input source such as Computer 1 or Video
with the COMPUTER button or the VIDEO button on the remote
control so that the Terminal function can be selected.
selected
64
Appendix
The Remote Control does not
work.
– Check the batteries.
– Make sure there is no obstruction between the projector and
remote control.
– Make sure you are not too far from the projector when using the
remote control. Maximum operating range is 16.4' (5 m).
– Make sure the code of the remote control is conformed to that of
the projector. (See page 52)
– Unlock the Key lock function for the remote control. (See page 53)
Indicator blinks or lights.
– Check the status of the projector with referring to "Indicators and projector Condition". (see page 69)
The exclamation mark appears
on the screen.
– Your operation is invalid. Operate correctly.
The Top Control does not work
– Unlock the Key lock function for the top control of the projector. (See
page 53)
Unable to unlock the Logo PIN
code lock, Security key lock or
Security PIN code lock.
– Contact the dealer where you purchased the projector or the
service center.
WARNING:
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Give the model number and explain about the problem. We will advise you
how to obtain service.
The CE Mark is a Directive
c o n fo r m i t y m a r k o f t h e
European Community (EC).
This symbol on the nameplate means
t h e p r o d u c t i s L i s t e d by U n d e r w r i t e r s
Laboratories Inc. It is designed and
manufactured to meet r igid U.L. safety
standards against risk of fire, casualty and
electrical hazards.
65
Appendix
Menu Tree Computer Input/Video Input
Computer 1
Input
RGB
Go to System (1)
S-video
Go to System (3)
Component
Go to System (2)
RGB (Scart)
Quit
Computer 2
Go to System (1)
Video
Go to System (3)
Sound
Sound
Volume
0 - 63
Mute
On/Off
Quit
Computer Input
System (1)
Mode 1
Mode 2
SVGA 1
----
PC Adjust
Auto PC Adj.
Fine sync.
0 - 31
Total dots
Horizontal
Vertical
Current mode
H-sync freq.
Clamp
V-sync freq.
Quit
Display area - H
Display area - V
Reset
Yes/No
Mode free
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Store
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Quit
66
✽Systems displayed in the System Menu vary depending the input
signal.
Appendix
Video Input
Image Select
Dynamic
System (2)
Auto
1080i
1035i
720p
575p
480p
575i
480i
System (3)
Auto
PAL
SECAM
NTSC
NTSC 4.43
Standard
Real
Blackboard (Green)
Colorboard
4 Colors
Image 1
Image 2
Image 3
Image 4
Image Adjust
Contrast
0 - 63
Brightness
0 - 63
Color temp.
High
PAL-M
PAL-N
Image Select
Low
Dynamic
Standard
Cinema
Blackboard (Green)
XLow
Colorboard
Adj.
Image 1
Red
0 - 63
Image 2
Green
Blue
0 - 63
Image 3
0 - 63
Image 4
Sharpness
0 - 15
Gamma
Reset
0 - 15
Store
Image 1
Mid
Yes/No
Image 2
Image 3
Image Adjust
Contrast
Brightness
0 - 63
Color
0 - 63
Tint
0 - 63
Color temp.
0 - 63
Red
High
Mid
Low
XLow
Adj.
0 - 63
Normal
Green
0 - 63
True
Blue
0 - 63
Wide
Full
Sharpness
0 - 15
Gamma
0 - 15
Off
Image 4
Quit
Quit
Screen
4 Colors
Custom
Scale
H/V
Noise reduction
H&V
On/Off
Position
H/V
Yes/No
Common
Reset
L1
L2
Progressive
Yes/No
L1
Quit
L2
Digital zoom +
Digital zoom –
Off
Reset
Store
Film
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Quit
67
Appendix
Screen
Setting
Normal
Wide
Custom
Scale
H/V
H&V
On/Off
Position
Common
H/V
Yes/No
Reset
Yes/No
Keystone
Blue back
Display
Logo
Quit
Setting
Setting
Language
On
Logo PIN code change
Quit
English
German
French
Quit
Italian
Spanish
Portuguese
Dutch
Swedish
Finnish
Polish
Hungarian
Romanian
Russian
Chinese
Korean
Japanese
Quit
Auto setup
Store/Reset
On/Off
On/Countdown off/Off
Logo select
Off
Default
User
Capture
Yes/No
Logo PIN code lock
Logo PIN code entry
Off
Input search
Off
On 1
Ceiling
On/Off
Rear
On/Off
Terminal
Computer 2/Monitor out
Standby mode
Eco/Normal
Power management
On start
Lamp control
Off
Ready
Shut down
Timer (1-30 Min.)
Quit
On/Off
Normal/Auto/Eco
Remote control
Code 1/Code 2
Security
Key lock
Off
Projector
Remote Control
Quit
PIN code lock
PIN code lock entry
Off
On1
On2
On 2
Auto PC adj.
Off
On
Auto Keystone
PIN code change
Off
Auto
Manual
Quit
Quit
Quit
Fan
L1/L2
Fan control
Off/On1/On2
Closed Caption
Off/CC1/CC2/CC3/CC4
Color/White
Lamp counter
Hour(s)
Reset
Quit
Factory default
Yes/No
Quit
Quit
68
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
Projector Condition
LAMP
POWER WARNING
REPLACE
red
red/green
yellow
The projector is off. (The AC power cord is unplugged.)
✽
The projector is preparing for stand-by or the projection lamp is
being cooled down. The projector cannot be turned on until cooling
is completed.
✽
The projector is ready to be turned on with the POWER ON/STANDBY button.
✽
The projector is operating normally.
✽
The projector is in the Power management mode.
✽
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled
down enough and the temperature returns to normal, the POWER
indicator lights red and the projector can be turned on. (The
WARNING indicator keeps blinking.)
✽
The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
indicator stops blinking. Check and clean the air filter.
✽
The projector detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the
projector. If the projector is turned off again, disconnect the AC
power cord and contact the dealer or the service center for service
and checkup. Do not leave the projector on. It may cause an electric
shock or a fire hazard.
• • • green
• • • red
• • • blinks green
• • • blinks red
• • • off
✽W hen the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.
When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp
replacement counter after replacing the lamp. See pages 60-62.
69
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned
and less than 140 MHz of Dot Clock.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN
RESOLUTION
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480i
575i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
70
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
––––––––
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
H-Freq.
(kHz)
V-Freq.
(Hz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
60.24
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
60.00
(Interlace)
50.00
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
86.96
(Interlace)
58.20
58.30
72.00
75.08
ON-SCREEN
RESOLUTION
DISPLAY
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA +1
SXGA +2
SXGA +3
MAC21
MAC
MAC
480p
575p
720p
720p
1035i
1080i
1080i
WXGA 1
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
WXGA 9
WXGA10
WXGA11
WUXGA 1
WUXGA 2
WSXGA+1
WXGA+1
WXGA+2
UXGA 1
UXGA 2
UXGA 3
UXGA 4
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1280 x 768
1280 x 768
1280 x 768
1280 x 800
1280 x 800
1280 x 800
1920 x 1200
1920 x 1200
1680 x 1050
1440 x 900
1440 x 900
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
H-Freq.
(kHz)
V-Freq.
(Hz)
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
63.979
65.346
65.121
68.68
75.00
80.00
31.47
31.25
37.50
45.00
33.75
33.75
28.125
48.36
47.70
48.36
56.16
47.776
60.289
68.633
49.600
41.200
49.702
74.556
74.038
65.290
55.935
74.918
75.00
81.25
87.5
93.75
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
86.00
(Interlace)
94.00
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
60.18
85.024
60.190
60.116
59.902
75.06
75.08
75.08
59.88
50.00
50.00
60.00
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
60.00
60.00
60.00
72.00
59.87
74.893
84.837
60.050
50.000
59.810
59.885
59.950
59.954
59.887
60.000
60.00
65.00
70.00
75.00
Appendix
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Foot Adjustment
Multi-media Projector
264 mm x 55 mm x 188 mm (Not including protrusion)
3.53lbs (1.6 kg)
0˚ to 10.0˚
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
0.63" TFT Active Matrix type, 3 panels
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
High Definition TV Signal
Scanning Frequency
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz
Optical Information
Projection Image Size (Diagonal)
Projection Lens
Throw Distance
Projection Lamp
Adjustable from 40" to 300"
F 1.77 ~ 1.99 lens with f 17.4 mm ~ 21.1 mm with manual zoom and focus
3.6' ~ 32.8' (1.1 m ~ 10.0 m)
175W
Interface
Video Input Jack
Audio Input Jacks
Computer Input 1/S-VIDEO /Component Input Terminal
RCA Type x 1
RCA Type x 2
Analog RGB (Mini D-sub 15 pin) Terminal x 1
Computer Input 2/Monitor Output Terminal
Computer/ Component Audio Input Jack
Service Port Connector
Audio Output Jack
Analog RGB (Mini D-sub 15 pin) Terminal x 1 (In/Out switchable)
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
Mini Jack (stereo) x 1 (Variable)
Audio
Internal Audio Amp
Built-in Speaker
1.0 W RMS
1 speaker, ø1.1" (28 mm)
Power
Voltage and Power Consumption
AC 100 ~ 120 V (2.7A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (1.5A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature
Storage Temperature
41˚F ~ 95˚F (5˚C ~ 35˚C)
14˚F ~ 140˚F (-10˚C ~ 60˚C)
Remote Control
Battery
Operating Range
Dimensions
Net Weight
AA or LR6 1.5 V ALKALINE TYPE x 2
16.4' (5 m)/±30˚
1.9" (W) x 0.87" (H) x 5.7" (D) (49 mm x 22 mm x 145.3 mm)
3.53 oz (100 g) (including batteries)
71
Appendix
Accessories
Owner's Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Lens Cover with String
PIN Code Label
Carry bag
Ferrite Core
● The specifications are subject to change without notice.
●LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD
panels.
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item and Model No.
to the sales dealer.
Model No.
COMPONENT-VGA Cable
: AH-98771
SCART-VGA Cable
: AH-98881
S-VIDEO-VGA Cable
: AH-98661
72
Appendix
Configurations of Terminals
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
4
5
10
15
3
9
14
2
8
13
1
7
12
6
11
1
Red (R/Cr/S-C) Input/R Output 9
5V / ---
2
Green (G/Y/S-Y) Input/G Output 10
Ground (Vert.sync.)
3
Blue (B/Cb/---) Input/B Output
11
Ground
4
-----
12
DDC data / ---
5
Ground (Horiz.sync.)
13
Horiz. sync. Input/Output (Composite H/V sync.Input)
6
Ground (Red)
14
Vert. sync. Input/Output
7
Ground (Green)
15
DDC clock / ---
8
Ground (Blue)
SERVICE PORT CONNECTOR
Terminal: Mini DIN 8-PIN
Serial
8
5
1
7 6
4 3
RXD
2 PJN_POW
2 1
3
PJN_DET
4
GND
5
-----
6
TXD
7
-----
8
-----
Dimensions
Unit: inch(mm)
10.39 (264)
2.17 (55)
Screw Holes for Ceiling Mount
Screw: M4
Depth: 0.315(8.0)
2.58 (65.5)
1.34 (33.9)
2.76 (70)
0.65 (16.6)
3.35 (85)
5.51 (140)
7.40 (188)
10˚ MAX
4.33 (110)
4.80 (122)
73
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No.
Factory default set No: 4 3 2 1*
*Should the four-digit number be
changed, the factory set number
will be invalid.
While the projector is locked with the PIN code....
Put the label below (supplied) on in a prominent place of
the projector's body while it is locked with a PIN code.
74
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : usa@eiki.com
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : canada@eiki.com
Deutschland & Österreich
Eastern Europe
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel : 06126-9371-0
Fax : 06126-9371-14
E-Mail : info@eiki.de
EIKI CZECH SPOL. s.r.o.
Nad Cementárnou 1163/4a
Paraha 4, Podolí
147 00
Czech Republic
Tel : +42 02 4141 0928
+42 02 4140 3095
Fax: +42 02 4140 9435
E-Mail : easterneurope@eiki.de
China
South East Asia
EIKI (Shanghai) Co., Ltd.
1. Dapu Road,
Golden Magnolia Plaza
#2109 Shanghai,
200023 China
Tel : 86-21-5396-0088
Fax : 86-21-5396-0318
E-mail : info@eiki-china.com
EIKI Industrial (M) Sdn Bhd
No. 3A-2C, 4th Floor, Jalan PJU 8/3A,
Perdana Business Centre,
Bandar Damansara Perdana,
47820 Petaling Jaya, Selangor
Malaysia
Tel : +603-7722-4362
Fax : +603-7722-4392
E-Mail : sales@eiki.my
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel :
+81-6-6311-9479
Fax :
+81-6-6311-8486
WorldWide Website
KT7BC
http://www.eiki.com
©2008 Eiki International, Inc.