Eizo L778 Speaker User Manual

SAFETY SYMBOLS
PRECAUTIONS
1. Introduction
1-1. Features
1-2. Package Contents
1-3. Controls &
Connectors
2. CABLE CONNECTION
2-1. Before Connecting
2-2. Connecting the
Signal Cable
2-3. Connecting Two PCs
to the Monitor
2-4. Sound Connections
3. ScreenManager
3-1. How to use the
ScreenManager
3-2. ScreenManager
Adjustments and Settings
3-3. FineContrast
3-4. Useful Functions
4. ADJUSTMENT
4-1. Screen Adjustment
4-2. Color Adjustment
4-3. Sound Setting
4-4. Power-save Setup
5. MAKING USE OF USB
(Universal Serial Bus)
6. ATTACHING AN ARM
7. TROUBLESHOOTING
8. CLEANING
9. SPECIFICATIONS
10. GLOSSARY
This manual is checked under the browser settings
shown below. Text size can change for another one
through browser setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European
APPENDIX/ANHANG/ANNEXE
About TCO'03 (Applicable white)
About TCO'99 (Applicable black
and silver)
FCC Declaration of Conformity
Hinweis zur Ergonomie / Recycle
Auskunft / Hinweise zur Auswahl
des richtigen Schwenkarms für
Ihren Monitor
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or property
or product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2004 EIZO NANAO
CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the
prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information
confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt of
said information. Although every effort has been made to ensure that this manual provides up-to-date
information, please note that EIZO monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered
mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager is a trademark of EIZO NANAO CORPORATION.
ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION.
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
is a trademark of SRS labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
PRECAUTIONS
IMPORTANT!
●
●
This product has been adjusted specifically for use in the region to which it was originally shipped.
If operated outside the region to which it was originally shipped, the product may not perform as
stated in the specifications.
To ensure personal safety and proper maintenance, please read this section and the caution
statements on the unit (refer to the figure below).
[Location of the Caution Statements]
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or
equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or
removing covers may result in fire, electric shock, or equipment
damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or
spillage into the cabinet may result in fire, electric shock, or equipment damage. If
an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have
the unit checked by a qualified service engineer before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result
in injury or equipment damage.If the unit falls, disconnect
the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a
damaged unit may result in fire or electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
● Do not place outdoors.
● Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
● Do not place in a dusty or humid environment.
● Do not place in a location where the steam comes directly on the screen.
● Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away from babies
and children.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may
result in fire or electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
●
●
The unit is designed for use with a specific voltage only. Connection to
another voltage than specified in this User's Manual may cause fire, electric
shock, or equipment damage.
Do not overload your power circuit, as this may result in fire or electric
shock.
Handle the power cord with care.
●
●
Do not place the cord underneath the unit or other heavy objects.
Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may
result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user's manual of the arm
stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to come unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do
not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock. When reattaching the tilt stand, please use the same screws and
tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the
skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms
result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with
the cord attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
●
●
●
Do not place any objects on the ventilation slots.
Do not install the unit in a closed space.
Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment
damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended
period, disconnect the power cord from the wall socket
after turning off the power switch for the safety and the
power conservation.
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the
stable luminosity, use of a monitor in lower brightness is recommended.
The screen may have defective pixels. These pixels may
appear as slightly light or dark area on the screen. This is
due to the characteristics of the panel itself, and not the
product.
The backlight of the LCD panel has a fixed life span. When the screen becomes
dark or begins to flicker, please contact your dealer.
Do not press on the panel or edge of the frame strongly, as
this may result in damage to the screen. There will be prints
left on the screen if the pressed image is dark or black. If
pressure is repeatedly applied to the screen, it may
deteriorate or damage your LCD panel. Leave the screen
white to decrease the prints.
When the screen image is changed after displaying the same image for extended
periods of time, an afterimage may appear. Use the screen saver or timer to avoid
displaying the same image for extended periods of time.
When the monitor is cold and brought into a room or the
room temperature goes up quickly, dew condensation may
occur inside and outside the monitor. In that case, do not
turn the monitor on and wait until dew condensation
disappears, otherwise it may cause some damages to it.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen
as this may result in damage to the panel. Do not attempt to brush with tissues as
this may scratch the LCD panel.
1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
●
●
●
Dual inputs compliant (DVI-D and D-Sub mini 15 pin connecters)
DVI Digital input (TMDS) compliant
[Horizontal scanning frequency]
Analog: 24.8 - 80 kHz
Digital: 31 - 64 kHz
[Vertical scanning frequency]
Analog: 50 - 75 Hz
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
●
●
●
❍
●
●
●
●
[Resolution]
1280 dots x 1024 lines
Auto Screen Adjustment function incorporate
FineContrast modes, to select the most suitable mode for screen display
The EIZO LCD Utility Disk enclosed (See readme.txt in the CD-ROM for details.)
The utility software "ScreenManager Pro for LCD" (for Windows) to control a monitor form a PC
with a mouse and a keyboard
Build-in speaker system
The ArcSwing Stand enables to adjust the monitor height and monitor angle freely
USB supported
BrightRegulator function incorporated
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
● LCD Monitor
● User's Manual (in the CD-ROM)
● Power Cord
● Setup Guide
● Signal Cable (FD-C39)
● ScreenManager Quick Reference
● Signal Cable (MD-C87)
● LIMITED WARRANTY
● EIZO USB Cable (MD-C93)
● Mounting Screws (M4 x 12 mm, 4 pcs)
● EIZO LCD Utility Disk
●
●
Stereo mini-jack Cable (2 pcs)
Please retain the packing materials for future transference.
1-3. Controls & Connectors
Front
(1) Sensor* 1
(2) Speaker
(3) ScreenManager ®
(4) Input Signal Selection Button
(5) Mode Button* 2
(6) Auto Adjustment Button
(7) Enter Button
(8) Control Buttons (Left, Down, Up, Right)
(9) BrightRegulator Button* 1 * 2
(10) Power Button
(11) Power Indicator* 3
Blue
Operation
Yellow Power saving
Off
Power off
*1 When using the BrightRegulator function, the sensor detects the surrounding brightness. Refer to
Bright Regulator Function.
*2 Directly pressing the Mode button allows you to select a FineContrast Mode. The ScreenManager
Main Menu and the FineContrast/BrightRegulator Menu cannot be displayed at the same time.
*3 Regarding the power indicator for the "Off Timer", see Off Timer function.
Rear and Side
(12) USB Downstream port
(13) Security Lock Slot* 4
(14) ArcSwing Stand *5
(15) Head Phone jack
(16) Power Connector
(17) DVI-D connector (DVI)
(18) External line in (stereo mini-jack)
(19) D-Sub mini 15 pin Input Connector (D-SUB)
(20) External line in (stereo mini-jack)
(21) USB upstream Port (1 Port)
*4 Allows for connection of a security cable. This lock supports Kensington's MicroSaver security
system. For further information, please consult:
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel.: 800-650-4242, x3348, Intl: 650-572-2700, x3348
Fax: 650-572-9675
http://www.kensington.com
*5 The LCD monitor can be used with an optional arm stand by removing the stand.
(See 6. ATTACHING AN ARM)
2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency)
in accordance with the charts below.
●
When your computer and display support VESA DDC, the suitable resolution and the refresh rate are
set by just plugging your display into the computer without any manual settings.
Analog Input
Resolution Frequency
Dot Clock
Remarks
640 × 480
67 Hz
Apple Macintosh
640 × 480
~ 75 Hz
VGA, VESA
720 × 400
70 Hz
VGA TEXT
800 × 600
~ 75 Hz
VESA
832 × 624
75 Hz
Apple Macintosh
1024 × 768
~ 75 Hz
1152 × 864
75 Hz
VESA
1152 × 870
75 Hz
Apple Macintosh
1280× 960
60 Hz
VESA
1280 × 960
75 Hz
Apple
Macintosh
1280 × 1024
~ 75 Hz
VESA
135 MHz (Max.)
VESA
Digital Input
Resolution Frequency
Dot Clock
Remarks
640 × 80
60Hz
VGA
720 × 400
70Hz
VGA TEXT
720 × 480
60Hz
800× 600
60Hz
VESA
1024 × 768
60Hz
VESA
1280 × 1024
60Hz
VESA
108 MHz (Max.)
VESA Safe Mode
2-2. Connecting the Signal Cable
●
Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor and the other end of
the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable
Signal Cable (MD-C87 enclosed)
Connector of the PC
Video Output Connector /
D-Sub mini 15 pin
Input Connector
(monitor) / D-Sub mini 15
pin
Video Output Connector /
Signal Cable (MD-C87 enclosed) + Adapter* D-Sub 15 pin
Input Connector
(monitor) / D-Sub mini 15
pin
PC
●
Standard graphics card
Power Macintosh G3 (Blue &
White) / Power Mac G4 (VGA)
●
Macintosh
●
*Macintosh Adapter (Optional)
Digital Input
Signal Cable
Connector of the PC
PC
Signal Cable (FD-C39 enclosed) Video Output Connector/ DVI
Input Connector (monitor) / DVI
●
●
●
Digital graphics board
Power Mac G4/G5 (DVI)
The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector).
2. Plug the power cord into the power connector on the rear of the monitor. Then, plug
the other end of the cord into a power outlet.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may
result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
3. Adjust the "height", "front and back position" and "angle" of the monitor.
Grip both side of the center part of the monitor and move slowly (refer to
the right figure.)
(1) Adjust the height of the monitor. To heighten, push the monitor
backward. To lower, pull the monitor forward.
(2) Adjust the position and angle of the monitor.
(3) If necessary, fine adjust the height of the monitor.
4. Turn on the monitor's Power button and then turn on the PC's power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the 7. TROUBLESHOOTING for advice.
Whenever finished, turn off the PC and the monitor.
●
When turning on the monitor, the kind of the input signal (Signal 1 or 2/Analog or Digital) is
●
●
displayed for a few seconds on the right top corner of the screen.
Adjust brightness of the screen depending on the brightness of your environment. The
"BrightRegulator function" enables to adjust the brightness of the screen automatically depending
on the surrounding brightness.
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
Bright Regulator Function
BrightRegulator function adjusts the brightness of the screen automatically depending on the surrounding
brightness. The brightness of backlight is adjusted as the sensor on the upper side of the monitor detects the
surrounding brightness (Default: this function is set "Disable".)
[How to switch the setting]
1. Push the BrightRegulator Button on the contol panel.
2. The current setting will be appear on the left corner of the screen. During the appearance, pushing the
BrightRegulator button allows you to change the setting.
●
Do not block the sensor when using this function.
ScreenManager Pro for LCD
When using the software, ScreenManager Pro for LCD (for Windows), connect the upstream port of the
monitor to the downstream port of the USB compliant PC or another hub with the USB cable.
After connecting the USB cable, the USB function can be set up automatically. For further details about
the "ScreenManager Pro for LCD", refer to the readme.txt in the CD-ROM.
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin connector on the
back of the monitor.
Selecting the Active Input
The Input Signal Selection Button on the control panel can be used to select either DVI or D-SUB as the
active input at any time. Every time the button is pressed, the input changes. When switching the signal,
the kind of the input signal (Analog or Digital) is displayed for a few seconds on the right top corner of the
screen.
●
The sound from the speaker is also switched when switching the input signal.
2-4. Sound Connections
●
●
Always switch the monitor and audio devices or computers off whenever connecting or disconnecting
any audio devices (computer or CD player) to the monitor.
Use the enclosed stereo mini-jack cable for connecting audio devices or computers to the monitor.
1. Connect the stereo mini-jack cable to the external line in of the monitor.
2. Connect the other side of stereo mini-jack cable to the line out of audio devices.
Sound control
Audio performance is available by connecting the headphone to the Headphone jack (When headphones
are connected, no sound can be heard from the speakers).
●
About the sound control, please refer to "Sound Setting".
3. ScreenManager
3-1. How to use the ScreenManager
ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast
mode easily.
●
Main Menu and FineContrast Menu cannot be activated at the same time.
1. Entering the ScreenManager
Press the Enter button once to display the main menu of the ScreenManager.
2. Making Adjustments and Settings
1. Select the desired sub menu icon using the Control buttons and press the Enter button. The sub menu
appears.
2. Use the Control buttons to select the desired setting icon and press the Enter button. The setting menu
appears.
3. Use the Control buttons to make all required adjustments and press the Enter button to save the settings.
3. Exiting the ScreenManager
1. To return to the main menu, select the <Return> icon or press the Down button twice, followed by the
Enter button.
2. To exit the ScreenManager, select <Exit> icon or press the Down button twice, followed by the Enter
button.
●
Double clicking the Enter Button at any time also exits the ScreenManager menu.
FineContrast Menu
Directly pressing the left or right button allows you to select the best suited mode for screen display from
5 FineContrast modes; Custom, Movie, Picture, Text and sRGB. To exit the menu, press the Enter
button.
3-2. ScreenManager Adjustments and Settings
The following table shows all the ScreenManager's adjustment and setting menus.
"*" indicates adjustments of analog input only.
Main menu
Screen
Sub menu
Reference
Clock
*
Phase
*
Position
* 4-1.Screen Adjustment
Range Adjustment
*
Smoothing
Brightness
Temperature
Gamma
Color (Custom)*
Saturation
1
Hue
4-2.Color Adjustment
Gain
C-Booster
Reset
Volume
Mute
Surround
Sound
Tone
4-3.Sound Setting
Balance
PowerSave
Reset
Others
Information
Input Signal
Set the input signal selection of automatic or
manual.
Off Timer
Set the monitor's Off Timer to on or off.
Menu Position
Adjust the menu position
Translucent
Set the transparency of the background.
Menu Off Timer
Set the menu displaying time.* 2
Reset
Return to the factory Default settings.
Information
Review the ScreenManager's settings, model name,
serial number and usage time.* 3
English, German, French, Spanish,
Italian, Swedish and Japanese
Language
Select the ScreenManager's language.
*1 The adjustable functions on the <Color> menu depend on the selected FineContrast mode. The
above table shows the sub menus when the "Custom" mode is selected ("4-2.Color Adjustment").
*2 The displaying time of the FineContrast Menu and BrightRegulator Menu cannot be changed.
*3 Due to the inspection on the factory, the usage time may not "0 hour" at shipping.
3-3. FineContrast
This function allows you to select the best suited mode for screen display.
To select the Mode
Directly pressing the left or right button allows you to select the best suited mode for screen display from 5
FineContrast modes; Custom, Movies, Picture, Text and sRGB.
Exit
Press the Enter button to exit the menu.
FineContrast Mode
Selectable FineContrast modes are as follows.
Custom To adjust the color settings according to your preference
Movie Animated images
Picture Photo or picture image
Text
Text on word processor or spreadsheet software
sRGB
To display the screen images based on those original colors (ex. over the Internet)
Color Adjustment of the Mode Settings
The detailed color settings of each mode can be adjusted by using the <Color> menu of the
ScreenManager. ("4-2. Color Adjustment")
3-4. Useful Functions
Adjustment Lock
Use the "Adjustment Lock" function to prevent any accidental changes.
●
●
Locked function
●
●
●
●
Unlocked function
●
●
Adjustments and settings in the ScreenManager
Auto Adjustment Button
Mode Button
BrightRegulator Button
Power Button
Input Signal Selection Button
Volume Control by Right/Left Control Button
Brightness adjustment by Up/Down Control Button
[How To lock]
1. Turn off the monitor's power by the Power button on the control panel.
2. Press on the Auto Adjustment button while turning on the monitor's power.
[How To unlock]
1. Turn off the monitor's power by the Power button on the control panel.
2. Hold down the Auto Adjustment button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after a predetermined
amount of time has lapsed. This function was created to reduce Afterimage characteristics that are
particular to LCD monitors when the monitor screen is left on for a long period without use.
[Procedure]
1. Select <Off Timer> in the ScreenManager <Others> menu.
2. Select "Enable" and press the Right and Left buttons to adjust the "On Period" (1 to 23 hours).
[Off Timer System]
PC
On Period (1H - 23H)
Last 15 min. in "On period"
"On period" expired
Monitor
Operation
Advance Notice*
1
Power Off
Power Indicator
Blue
Blue Flashing
Off
*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor
automatically enters the "Power Off" mode. To delay entering the "Power Off" mode, press the Power
button during the advance notice period. The monitor will continue to operate for an additional 90
minutes.
[Power Resumption Procedure]
Press the Power button to return to a normal screen.
●
The off timer function works while the PowerManager is active, but there is no advance notice before
the monitor's power is switched off.
EIZO Logo Appearing Function
When switching on the Power button on the control panel, the EIZO logo is displyed for a while. If you
desire to display or undisplay this logo, use this function. (Default is logo appearing.)
[To undisplay]
Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the
power back on.
[To display]
Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the
power back on.
Automatically Selecting the Input Signal Function
The monitor will automatically detect the inputted signal of either the connection for display. (Default: this
function is set ("Auto").)
●
Connecting Two PCs to the Monitor
When the one computer is switched off or entering the power saving mode, the monitor will
automatically display the other signal.
Use the ScreenManager to switch the input signal manually.
[Procedure]
1. Select <Input Signal> in the <Others> menu.
2. Select <Manual>.
4. ADJUSTMENT
4-1. Screen Adjustment
●
Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments.
The monitor displays the digital input image correctly based on its pre-setting data.
Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for
adjusting the screen to its proper position. There is only one correct position for each display mode. It is
also recommended to use the ScreenManager function when first installing the display or whenever
changing the system. For convenience, an easy set-up Program installed on the utility disk to assist in the
set-up procedure is provided.
Adjustment Procedure
1. Press the Auto Adjustment button on the control panel.
The message "Your setting will be lost, if you press again now." appears and remains on the screen for 5
seconds. While the message is on the screen, press the Auto Adjustment button again to automatically
adjust the clock, phase and screen position. If you do not wish to do adjust the screen, do not press the
Auto Adjustment button again.
●
The Auto adjustment function is intended for use on the Macintosh and on AT-compatible PC
running Windows. It may not work properly in either of the following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The background color for the
"wall paper" or "desktop" pattern is set to black.
If the appropriate screen cannot be made by using the Auto Adjustment button, adjust the screen
through the following procedures.If the appropriate screen can be made, proceed to step 4.
2. Run the "Screen Adjustment Program".
Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD
Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program
can be directly run from the menu screen of the CD-ROM.)
●
If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop
pattern to that as shown in the diagram on the following.
3. Adjust by using <Screen> menu in the ScreenManager.
(1) Vertical bars appear on the screen
→
Use the <Clock> adjustment.
Select the <Clock> and eliminate the vertical bars by using the Right and Left of the Control buttons.
Do not continuously press the Control buttons, as the adjustment value will change quickly and make it
difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear,
proceed to <Phase> adjustment as follows.
(2) Horizontal flickering, blurring or bars appear on the screen.
→
Use the <Phase> adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the Right and Left
buttons.
●
Horizontal bars may not completely disappear from the screen depending on the PC.
(3) The screen position is incorrect.
→
Use the <Position> adjustment.
The correct displayed position of the monitor is decided because the number and the position of the
pixels are fixed. The <Position> adjustment moves the image to the correct position.
Select <Position> and adjust the position of the upper left corner of the image by using the Up, Down,
Right and Left buttons in order to align the screen.
If vertical bars of distortion appear after finishing the <Position> adjustment, return to <Clock>
adjustment and repeat the previously explained adjustment procedure. ("Clock" → "Phase" →
"Position")
4. Adjust the output signal range (Dynamic Range) of the signal.
→
Use the <Range Adjustment> of <Screen> menu.
This controls the level of output signal range to display the whole color gradation (256 colors).
[Procedure]
Press the Auto Adjustment button on the control panel while displaying the <Range Adjustment> menu to
automatically adjust the range. The screen blanks for a moment and adjusts the color range to display the
whole color gradation of the current output signal.
5. To smooth the blurred texts of the enlarged screen of the lower resolutions.
→
Switch the <Smoothing> setting.
Select the suitable level from 1 - 5 (Soft - Sharp).
Select <Smoothing> in the <Screen> menu and adjust by using the Right and Left buttons.
●
Since the displayed image is enlarged, the blurred texts may not be necessarily lost completely.
4-2. Color Adjustment
Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the
ScreenManager.
In the analog input, perform the <Range Adjustment> before making the color adjustments.
Adjustment Items
The adjustable items and displayed icons on the <Color> menu depend on the selected FineContrast mode.
" * ": Settable/Adjustable " - ": Fixed at the factory
Icons
Functions
FineContrast Modes
Custom sRGB Text Picture Movie
Brightness
*
*
*
*
*
Temperature
*
-
*
*
*
Gamma
*
-
*
-
-
Saturation
*
-
*
*
*
Hue
*
-
*
*
*
Gain
*
-
-
-
-
C-Booster
*
-
-
*
*
Reset
*
-
*
*
*
●
●
●
Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow
the monitor to warm up for at least 20 minutes before making adjustments.)
Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the
default settings.
The values shown in percentages represent the current level within the specific adjustment. They are
available only as a reference tool. (To create a uniform white or black screen, the percentages for each
will probably not be the same.)
Adjustment Contents
Menu
Function Descriptions
To set the brightness of the screen
Adjustable range
0 ~ 100 %
Brightness
●
●
When <BrightRegulator> is set "Enable", brightness of the screen automatically adjusted
depending on the surrounding brightness based on the manual brightness adjustment.
Directly pressing the up and down control buttons also can adjust the brightness.
To set the color temperature
Temperature
●
●
Gamma
Saturation
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature
setting. (The color temperature's setting turns "OFF".)
To set the gamma value
●
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K) Default
setting is off (normal white)
1.8/2.0/2.2
If setting the gamma value, the using the monitor in the digital signal input is recommended.
To change the saturation
-128 ~ 124
Setting the minimum level (-128) turns the image
to the monochrome.
●
Using <Saturation> adjustment may not obtain proper tone reproduction.
To change the flesh color, etc.
Hue
●
Using <Hue> adjustment may not obtain proper tone reproduction.
0 ~ 100%
By adjusting the red, green and blue color tones
for each mode, custom colors can be defined.
Display a white or gray background image and
adjust the <Gain>.
To change each color
(red, green and blue)
Gain
●
●
-32 ~ 32
The values shown in the percentage are available only as a reference tool.
Setting the <Temperature> invalidates the <Gain> adjustment. <Gain> setting returns to the
defaul.
To emphasize the displayed image.
Off/Mode1/Mode2
C-Booster
●
●
Reset
To detect the brightness or darkness of the displayed image and raise the contrast of the
frequent gradation area.
Mode1 is soft effect and mode 2 is hard effect.
To return the color settings of the selected
mode to the default settings
Select the <Reset>.
4-3. Sound Setting
The sound from the speaker can be adjusted by using the <Sound> menu of the ScreenManager.
Menu
Volume
Function Descriptions
To adjust the volume
●
Adjustable range
0 ~ 30
Directly pressing the right and left button also displays the volume menu.
Mute
To mute the sound
On/Off
To add surrounding effect (SRS WOW) like acoustic sound or cleared sound. Off/Mode1/Mode2
Surrond
●
●
Mode 1 is soft effect and mode 2 is hard effect.
When selecting mode 2, the volume may be raised due to the surround effect.
Tone
To adjust the treble and bass
Treble: -15 ~ 15
Bass: -15 ~ 15
To adjust the output balance from the right and left speakers
-31 (Left) ~ 31 (Right)
To set up the sound output during the powersaving mode
On/Off
Balance
PowerSave
Reset
To return the sound settings f to the default settings
4-4. Power-save Setup
●
●
Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the
monitor from the power supply is recommended to save energy completely.
Even if the monitor is in a power saving mode, USB compliant devices function when they are
connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power
consumption of the monitor will change according to the connected devices even if the monitor is in a
power saving mode.
Analog Input
This monitor complies with the <VESA DPMS> standard and adopts a power saving method.
[Procedure]
1. Set the PC's power saving settings.
[Power Saving System]
PC
Monitor
Power Indicator
Operation
Operation
Blue
STAND-BY
Power saving SUSPEND Power saving
OFF
Yellow
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen.
Digital Input
This monitor complies with the "DVI DMPM".
[Procedure]
1. Set the PC's power saving settings.
[Power Saving System]
PC
On
Monitor
Power Indicator
Operation
Blue
Power saving Power saving
Yellow
Off mode
Yellow
Power saving
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen from the Power save mode of the PC.
Power on the PC to return a normal screen from the Off mode of the PC.
5. MAKING USE OF USB (Universal Serial
Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC
or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily
connected.
Required system environment
●
●
●
●
●
●
●
●
PC equipped with USB ports or another USB hub connected to the USB compliant PC
Windows 98/2000/Me/XP // Mac OS 8.5.1 or later
USB Cable (MD-C93, enclosed)
The USB hub function may not work properly depending on the PC or peripherals.
Please consult the manufacturer of each device about the USB support.
Using the USB Rev. 2.0 compatible PC or peripherals is recommended.
When the monitor is not on, the peripherals connected to the downstream ports will not operate.
Even if the monitor is in a power saving mode, the devices connected to the monitor's USB ports (both
the upstream and the downstream) will function.
The followings are procedures for the Windows 98/Me/2000/XP and Mac OS.
Connecting to the USB HUB
1. Connect the monitor to the PC with the signal cable first, then turn on the PC.
2. Connect the upstream port of the monitor to the downstream port of the USB
compliant PC or another hub by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
3. After setting up, the monitor's USB hub is available for connecting USB compliant
peripherals to the downstream ports of the monitor.
Connecting Examples
ScreenManager Pro for LCD (for Windows)
For further details about the "ScreenManager Pro for LCD (for Windows)", refer to the EIZO LCD Utility
Disk.
6. ATTACHING AN ARM
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the
LCD monitor.
●
●
●
If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers
before selecting.
❍ Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)
❍ Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as
a cable
❍ TÜV/GS approved arm or stand
Please connect cables after attaching an arm stand.
The portrait display is not recommended because it may not exploit the monitor's ability.
Setup Procedure
1. Lay the LCD monitor down. Do not scratch the panel.
2. Remove the tilt stand by loosening the screws.
(4 pcs of M4 x 12mm)
3. Attach an arm stand to the LCD monitor securely.
7. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
● No picture problems → See No.1 ~ No.2
● Imaging problems → See No.3 ~ No.10
● Other problems → See No.11 ~ No.14
● USB problems → See No.15 ~ No.16
Problems
Points to check with Possible Solutions
●
1. No picture
●
Indicator status: Off
●
●
●
Indicator status: Blue
●
●
●
Indicator status: Yellow
●
2. Error messages shown below will remain on the
screen for 40 seconds.
Check that the power cord is correctly
connected. If the problem persists, turn
off the monitor power for a few
minutes, then turn it back on and try
again.
Try pressing the Power button.
Try pressing the power of the
computer.
Check the "Brightness" setting.
Switch the signal input by pressing the
Input Signal Selection Button on the
front control panel.
Try pressing a key on the keyboard, or
clicking the mouse.
These messages appear when the signal is
not inputted correctly, even if the monitor
functions properly.
● When the image is displayed correctly
after a short time, there is no problem
with the monitor. (Some PCs do not
output the signal soon after powering
on.)
● Check that the signal cable is properly
connected to the PC or graphics board.
● Switch the signal input by pressing the
Input signal selection button on the
front control panel.
●
Whenever an error signal message appears, the signal
frequency will be displayed in red.
(Example)
3. Display position is incorrect.
●
●
●
Use the graphics board's utility
software to change the frequency
setting. (Refer to the manual of the
graphics board.)
Adjust the image position using the
<Position>.
If the problem persists, use the
graphics board's utility software to
change the display position if available.
4. Vertical bars of distortion appear.
●
Decrease the vertical bars using the
<Clock>.
5. Horizontal bars of distortion appear.
●
●
6. Letters and lines appear blurred.
●
7. The screen is too bright or too dark.
●
8. Afterimages appear.
9. The screen has defective pixels (e.g. slightly light or
dark).
●
●
●
10. Fingerprints remain on the screen.
Decrease the horizontal bars using the
<Phase>.
Adjust the blurred lines using
<Smoothing>.
Adjust the <Brightness> (The
backlight of the LCD monitor has a
fixed life span. When the screen
becomes dark or begins to flicker,
please contact your dealer.).
Do you use the screen saver or timer
when displaying the same image for
extended periods of time?
Afterimages are particular to LCD
monitors. Avoid displaying the same
image for extended periods of time.
This is due to the characteristics of the
panel itself, and not the LCD product.
Leaving the screen white may solve
the problem.
●
11. The Main menu of ScreenManager does not
operate.
●
12. The FineContrast mode does not operate.
●
13. The Auto Adjustment Button does not operate.
14. Frequency does not change after installing
"Monitor information file" in the attached utility
disk on Windows 98/2000/Me/XP.
●
●
●
15. PC is hung up. / The peripherals connected to the
downstream ports do not operate.
●
The adjustment lock is probably on.
To unlock: turn the LCD monitor off.
Then, while pressing the Auto
Adjustment button, turn the power on.
Check that the Main menu of
ScreenManager is not activated.
The adjustment lock is probably on.
To unlock: turn the LCD monitor off.
Then, while pressing the Auto
Adjustment button, turn the power on.
Use the graphics board's utility
software to change the input signal
frequency.
Check that the USB cable is correctly
connected.
Check the downstream ports by
connecting the peripherals to other
downstream ports. If the problem is
solved by doing this, contact an EIZO
dealer. (For details, refer to the manual
of the PC.)
Try executing the following method.
●
●
Restarting the PC
Connecting the PC and peripherals
directly
If the problem is solved by doing this,
contact an EIZO dealer.
●
●
16. USB function cannot be setup.
●
Check that the USB cable is correctly
connected.
Check that the PC and OS are USB
compliant. (For verification of USB
support, consult the manufacturer of
each system.)
Check the PC's BIOS setting for USB.
(For details, refer to the manual of the
PC.)
8. CLEANING
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
●
Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or
other strong solvents, as these may cause damage to the cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray
wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.)
LCD Panel
●
●
The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.
If necessary, stubborn stains can be removed by moistening part of a cloth with water to enhance
its cleaning power.
9. SPECIFICATIONS
L578
LCD Panel
43 cm (17.0 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing
Angle: H: 178°, V: 178° (CR ≥ 10)
Dot Pitch
0.264 mm
Horizontal Scan Frequency
Analog: 24.8 ~ 80 kHz (Automatic)
Digital: 31 ~ 64 kHz
Vertical Scan Frequency
Analog: 50 ~ 75 Hz (Automatic)
Digital: 59 ~ 61 Hz (VGA Text: 69 ~ 71 Hz)
Resolution
1280 dots x 1024 lines
Dot Clock (max.)
Analog: 135 MHz, Digital: 108 MHz
Display Colors
16 million colors (max.)
Display Area
337 mm (H) x 270 mm (V) (13.3" (H) x 9.1" (V))
Power Supply
100 - 120/200 - 240 VAC ±10%, 50/60 Hz, 0.9/0.5 A
Power Consumption
Max.: 50 W (with USB hub)
Power Saving Mode: Less than 2 W (for single signal input without USB)
Input Connector
DVI-D, D-Sub mini 15 pin
Analog Input Signal (Sync) Separate, TTL, Positive/Negative
Analog Input Signal (Video) 0.7 Vp-p / 75 Ω Positive
Input Signal (Digital)
TMDS (Single Link)
Signal registration
26 (Factory preset (analog) : 21)
Plug & Play
VESA DDC 2B
Amplifier Output (max.)
2W+2W
Line input
Input impeadance 47 k Ω (typ.)
Headphone output level
5 mW + 5 mW at Amplifier output 2 W + 2 W
Dimensions
441 mm (W) x 274.5 ~ 423.5 mm (H) x 200 mm (D)
(17.4" x 10.8" ~16.7" x 7.9")
Dimensions (without stand)
441 mm (W) x 335 mm (H) x 55 mm (D)
(17.4" x 13.2" x 2.2")
Weight
5.6 kg (12.4 lbs.)
Weight (without stand)
3.7 kg (8.2 lbs.)
USB standard
Rev. 2.0 complied self-powered hub
USB port
Upstream port x 1
Downstream port x 2
Communication Speed
480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Power Supply
Downstream: 500 mA for each (max.)
Temperature
Operating: 0°C ~ 35°C (32°F ~ 95°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC
NRTL/C-TÜV, FCC-B, TCO'03* 1 , TCO'99* 2 , EPA ENERGY STAR Program,
TÜV/Rheinland Ergonomics Approved
200-240 VAC
CE, CB, TÜV Rheinland/GS, TCO'03* 1 , TCO'99* 2 , EPA ENERGY STAR
Program, TÜV/Rheinland Ergonomics Approved
*1 Applicable to white color version only.
*2 Applicable to black color version and silver color version only.
L778
LCD Panel
48 cm (19.0 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing
Angle: H: 178°, V: 178° (CR ≥ 10)
Dot Pitch
0.294 mm
Horizontal Scan Frequency
Analog: 24.8 ~ 80 kHz (Automatic)
Digital: 31 ~ 64 kHz
Vertical Scan Frequency
Analog: 50 ~ 75 Hz (Automatic)
Digital: 59 ~ 61 Hz (VGA TEXT: 69 ~ 71 Hz)
Resolution
1280 dots x 1024 lines
Dot Clock (max.)
Analog: 135 MHz, Digital: 108 MHz
Display Colors
16 million colors (max.)
Display Area
376 mm (H) x 301 mm (V) (14.8" (H) x 11.9" (V))
Power Supply
100-120/200-240 VAC ±10%, 50/60 Hz, 0.9/0.55 A
Power Consumption
Max.: 55 W (with USB hub)
Power Saving Mode: Less than 2 W (for single signal input without USB)
Input Connector
DVI-D, D-Sub mini 15 pin
Analog Input Signal (Sync) Separate, TTL, Positive/Negative
Analog Input Signal (Video) 0.7 Vp-p / 75 Ω Positive
Input Signal (Digital)
TMDS (Single Link)
Signal registration
26 (Factory preset (analog) : 21)
Plug & Play
VESA DDC 2B
Amplifier Output (max.)
2W+2W
Line input
Input impeadance 47 k Ω (typ.)
Headphone output level
5 mW + 5 mW at Amplifier output 2 W + 2 W
Dimensions
483 mm (W) x 288 ~ 441 mm (H) x 200 mm (D)
(19.0" x 11.3" ~17.4" x 7.9")
Dimensions (without stand)
483 mm (W) x 370 mm (H) x 60 mm (D)
(19.0" x 14.6" x 2.36")
Weight
7.1 kg (15.7 lbs)
Weight (without stand)
5.3 kg (11.7 lbs.)
USB standard
Rev. 2.0 complied self-powered hub
USB port
Upstream port x 1
Downstream port x 2
Communication Speed
480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Power Supply
Downstream: 500 mA for each (max.)
Temperature
Operating: 0°C ~ 35°C (32°F ~ 95°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC
NRTL/C-TÜV, FCC-B, TCO'03* 1 , TCO'99* 2 , EPA ENERGY STAR Program,
TÜV/Rheinland Ergonomics Approved
200-240 VAC
CE, CB, TÜV Rheinland/GS, TCO'03* 1 , TCO'99* 2 , EPA ENERGY STAR
Program, TÜV/Rheinland Ergonomics Approved
*1 Applicable to white color version only.
*2 Applicable to black color version and silver color version only.
Default settings
Brightness
100%
BrightRegulator
Disable
FineContrast Mode
Custom
Surround
Mode2
Input Signal
Auto
Off Timer
Menu Off Timer
Disable
45 seconds
Language
Dimensions
L578
English
mm (inches)
L778
mm (inches)
Pin Assignment
DVI-D Connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
TMDS Data 2-
11
TMDS Data 1/3 Shield
21
NC
2
TMDS Data 2+
12
NC
22
TMDS Clock shield
3
TMDS Data 2/4 Shield
13
NC
23
TMDS Clock +
4
NC*
14
+5V Power
24
TMDS Clock -
5
NC
15
Ground (return for +5V, Hsync
and Vsync)
C1
Analog Red
6
DDC Clock (SCL)
16
Hot Plug Detect
C2
Analog Green
7
DDC Data (SDA)
17
TMDS Data 0-
C3
Analog Blue
8
Analog Vertical Sync
18
TMDS Dat 0+
C4
Analog Horizontal Sync
9
TMDS Data 1-
19
TMDS Data 0/5 Shield
10
TMDS Data 1+
20
NC
C5
Analog Ground
(analog R, G, & B return)
(*NC: No Connection)
D-Sub mini 15 pin connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
Red video
6
Red ground
11
Ground Shorted
2
Green video
7
Green ground
12
Data (SDA)
3
Blue video
8
Blue ground
13
H. Sync
4
Ground
9
No pin
14
V. Sync
5
No pin
10
Ground Shorted
15
Clock (SCL)
USB Port
No. Signal
Series B
Series A
Upstream
Downstream
Signal
1
VCC
Cable power
2
- Data
Serial data
3
+ Data
Serial data
4 Ground Cable Ground
10. GLOSSARY
Clock
With the analog input signal display, the analog signal is converted to a digital signal by the LCD
circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number
clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some
vertical bars of distortion are displayed on the screen.
DVI
(Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with
the signal transition method "TMDS". There are two kinds of DVI connectors. One is DVI-D
connector for digital signal input only. The other is DVI-I connector for both digital and analog
signal inputs.
DVI DMPM
(DVI Digital Monitor Power Management)
The Power management system for the digital interface. The "Monitor ON" status (operation
mode) and the "Active Off" status (power-saving mode) are indispensable for the DVI-DMPM as
the monitor's power mode.
Gain Adjustment
Adjusts each color parameter for red, green and blue. The color of the LCD monitor is displayed
through the color filter of the LCD panel. Red, green and blue are the three primary colors. The
colors on the monitor are displayed by combining these three colors. The color tone can change by
adjusting the illumination amount passed through each color's filter.
Gamma
Generally, the relationship that the light intensity values of a monitor change nonlinearly to the
input signal level is called "Gamma Characteristic". On the monitor, low gamma values display the
whitish images and high gamma values display the high contrast images.
Phase
The phase adjustment decides the sampling timing point for converting the analog input signal to a
digital signal. Adjusting the phase after the clock adjustment will produce a clear screen.
Range Adjustment
The Range Adjustment controls the level of output signal range to display the whole color
gradation.
Resolution
The LCD panel consists of a fixed number of pixel elements which are illuminated to form the
screen image. The EIZO L578/L778 display panel consists of 1280 horizontal pixels and 1024
vertical pixels. At a resolution of 1280 x 1024, all pixels are displayed as a full screen.
sRGB
(Standard RGB)
"International Standard for Red, Green, and Blue color space" A color space was defined with the
aim of the color matching between applications and hardware devices, such as monitors, scanners,
printers and digital cameras. As a standard default space, sRGB allows Internet users to closely
match colors.
Temperature
Color Temperature is a method to measure the white color tone, generally indicated in degrees
Kelvin. At high temperatures the white tone appears somewhat blue, while at lower temperatures it
appears somewhat red. Computer monitors generally give best performance at high temperature
settings.
5,000 K: Slightly reddish white.
6,500 K: Warm-white tone, similar to white paper or daylight.
9,300 K: Slightly bluish white.
TMDS
(Transition Minimized Differential Signaling)
A signal transition method for the digital interface.
VESA DPMS
(Video Electronics Standards Association - Display Power Management Signaling)
The acronym VESA stands for "Video Electronics Standards Association", and DPMS stands for
"Display Power Management Signaling". DPMS is a communication standard that PCs and
graphics boards use to implement power savings on the monitor side.
APPENDIX/ANHANG/
ANNEXE
Preset Timing Chart for Analog input
Timing-Übersichten für Analog Eingang
Synchronisation des Signaux pour Analog numerique
Based on the signal diagram shown below 20 factory presets have been registered in the monitor's
microprocessor.
Der integrierte Mikroprozessor des Monitors unterstützt 20 werkseitige Standardeinstellungen (siehe
hierzu die nachfolgenden Diagramme).
25 signaux ont été enregistrés en usine dans le microprocesseur du moniteur, conformément au diagramme
de synchronisation ci-dessous.
Mode
Dot Clock
MHz
Sync Polarity
H
V
Frequencies
fH: kHz fV: Hz
VGA Graphic
320 × 200
25.2
Nega
Posi
31.5
70.1
VGA
640 × 480
25.2
Nega
Posi
31.5
60.0
VGA Text
720 × 400
28.3
Nega
Posi
31.5
70.1
Macintosh
640 × 480
30.2
Posi
Posi
35.0
66.7
Macintosh
832 × 624
57.3
Posi
Posi
49.7
74.6
Macintosh
1152 × 870
100.0
Nega
Nega
68.7
75.1
Macintosh
1280 × 960
126.2
Posi
Posi
74.8
74.8
VESA
640 × 480
31.5
Nega
Nega
37.9
72.8
VESA
640 × 480
31.5
Nega
Nega
37.5
75.0
VESA
800 × 600
36.0
Posi
Posi
35.2
56.3
VESA
800 × 600
40.0
Posi
Posi
37.9
60.3
VESA
800 × 600
50.0
Posi
Posi
48.1
72.2
VESA
800 × 600
49.5
Posi
Posi
46.9
75.0
VESA
1024 × 768
65.0
Nega
Nega
48.4
60.0
VESA
1024 × 768
75.0
Nega
Nega
56.5
70.1
VESA
1024 × 768
78.8
Posi
Posi
60.0
75.0
VESA
1152 × 864
108.0
Posi
Posi
67.5
75.0
VESA
1280 × 960
108.0
Posi
Posi
60.0
60.0
VESA
1280 × 1024
108.0
Posi
Posi
64.0
60.0
VESA
1280 × 1024
135.0
Posi
Posi
80.0
75.0
[Applicable to white cabinet version only.]
Congratulations!
The display you have just purchased carries the TCO'03 Displays label. This means that your
display is designed, manufactured and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high performance product,
designed with the user in focus that also minimizes the Impact on our natural environment.
Some of the features of the TCO'03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in order to improve the working environment for the user and
to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
● Energy-saving mode after a certain time - beneficial both for the user and environment
● Electrical safety
● Emissions
Electromagnetic fields
● Noise emissions
Ecology
● The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
● Restrictions on
❍ chlorinated and brominated flame retardants and polymers
❍ heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
[Applicable to black cabinet version and silver cabinet version only.]
Congratulations!
You have just purchased a TCO'99 approved and labelled product! Your choice has provided you
with a product developed for professional use. Your purchase has also contributed to reducing
the burden on the environment and also to the further development of environmentally adapted
electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of
goods and services to the environment. The main problem, as far as computers and other electronics equipment are
concerned, is that environmentally harmful substances are used both in the products and during their manufacture.
Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these
potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity
generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive
waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby
consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO'99 scheme which provides for international and environmental
labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and
magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be
prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to
in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of inactivity,
shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and
magnetic fields, physical and visual ergonomics and good usability.
You will find a brief summary of the environmental requirements met by this product on the right. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): development@tco.se
Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet,
using the address: http://www.tco-info.com/
Environmental Requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of
flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive
damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been
found in human blood and researchers fear that disturbances in foetus development may occur.
The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain
flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed
circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays.
Cadmium damages the nervous system and is toxic in high doses.
The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the
electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in
high doses.
The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that
mercury is not present in any of the electrical or electronics components associated with the labelled unit.
CFCs (freons)
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break
down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of
ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system
and in higher doses, causes lead poisoning.
The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem Videosignal, 1280
Punkte x 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced.
Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu
verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom
Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des
Zubehörs sind in der zugehörenden Bedienungsanleitung angegeben.
b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht
höher als die Augenhöhe eines Benutzers in sitzender Position ist.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe
der Bildschirmmitte über dem Boden zwischen 135 - 150 cm beträgt.
d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min.
nach hinten =/> 5°).
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ± 180°). Der
maximale Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten
Position kippsicher sein.
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem
Partner MIREC GmbH & Co. KG. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der
Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu
erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter
der Internet-Adresse: www.eizo.de.
Recycling Information for customers in Switzerland:
All recycling information is placed in the SWICO's website.
http://www.swico.ch
Recycling-Information für Kunden in der Schweiz:
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes SWICO.
http://www.swico.ch
Renseignements de recyclage pour les clients en Suisse:
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I'UNION DE BRAN CHE
SWICO.
http://www.swico.ch
Recycling Information for customers in USA:
All recycling information is placed in the EIZO Nanao Technologies, Inc's website.
http://www.eizo.com/contact/index.html
Återvinnings information för kunder i Sverige:
All information om återvinning finns på Eizo Nordics hemsida:
www.eizo.se