Eizo S2100 Switch User Manual

PRECAUTIONS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Off Timer Settings
2-5 Screen Size Selection
2-6 Power Indicator/EIZO Logo Display Setting
2-7 Locking Buttons
2-8 Setting Adjustment menu Display
2-9 Viewing Information/Setting Language
2-10 Setting BrightRegulator
2-11 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
3-2 Connecting Peripheral USB Devices
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm (Option)
5-2 Cleaning
5-3 Specifications
5-4 Glossary
5-5 Preset Timing
How to Setup
Please read the Setup Manual (separate volume)
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them
carefully.
WARNING
Failure to abide by the information in a WARNING
may result in serious injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION
may result in moderate injury and/or property or
product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2005 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager is a trademark of EIZO NANAO CORPORATION.
FlexScan, ScreenManager and EIZO are registered trademarks of EIZO NANAO CORPORATION.
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Product specification may vary with sales areas.
Confirm the specification in the manual wrriten in language of the region of purchase.
PRECAUTIONS
IMPORTANT
• This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specified in the specifications.
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on
the monitor.
[Location of Caution Statement]
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment
damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in
fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into
the cabinet may result in fire, electric shock, or equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit
checked by a qualified service engineer before using it again.
PRECAUTIONS
1
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
• Do not place in a dusty or humid environment.
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
2
PRECAUTIONS
WARNING
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire
or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm
stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to become unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
PRECAUTIONS
3
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
4
PRECAUTIONS
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
The screen may have defective pixels. These pixels may appear as slightly light or dark areas on the screen. This is due
to the characteristics of the panel itself, and not the product defect.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints
left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate
or damage your LCD panel. Leave the screen white to decrease the prints.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause damage to the monitor.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
PRECAUTIONS
5
CONTENTS
PRECAUTIONS ...................................................... 1
2-7
Locking Buttons ............................................ 18
● To lock operation [Adjustment Lock]................. 18
LCD Panel................................................................... 5
2-8
To use the monitor comfortably ............................... 5
Setting Adjustment menu Display................ 19
● To update menu settings
[Menu Size/Menu Position/Menu Off Timer/
Chapter 1 Features and Overview ..................... 7
1-1
Features ............................................................ 7
1-2
Buttons and Indicators.................................... 7
1-3
Functions and Basic Operation...................... 8
Translucent/Orientation] ................................... 19
2-9
Viewing Information/Setting Language ....... 20
● To check settings, usage time, etc. .................. 20
● To set a language to be displayed
[Language] ....................................................... 20
2-10 Setting BrightRegulator ................................ 20
Chapter 2 Settings and Adjustments .............. 10
● [BrightRegulator] to set “Enable” or “Disable” for
BrightRegulator................................................. 20
2-1
Utility Disk ...................................................... 10
● Disk contents and software overview ............... 10
2-11 Resumption of Default Setting ..................... 20
● To reset color adjustment [Reset] ..................... 20
● To use ScreenManager Pro for LCD ................ 10
2-2
● To reset all settings [Reset] .............................. 20
Screen Adjustment .........................................11
Digital Input ...........................................................11
Chapter 3 Connecting Cables .......................... 21
Analog Input .........................................................11
3-1
2-3
Color Adjustment ........................................... 14
Simple adjustment [FineContrast mode] .......... 14
● FineContrast Mode ........................................... 14
● To select FineContrast mode name.................. 14
Advanced Adjustments [Adjustment menu] ..... 15
● To select an appropriate mode for images ....... 15
Connecting Two PCs to the Monitor ............ 21
● To set auto-switching of input signals
[Input Signal] .................................................... 22
3-2
Connecting Peripheral USB Devices ........... 22
Chapter 4 Troubleshooting............................... 23
● To set/adjust color ............................................ 16
2-4
Off Timer Settings .......................................... 16
● To set monitor power-off time [Off Timer] ......... 16
2-5
Screen Size Selection.................................... 17
Chapter 5 Reference ......................................... 25
5-1
Attaching an Arm (Option) ............................ 25
5-2
Cleaning.......................................................... 26
5-3
Specifications ................................................ 27
5-4
Glossary ......................................................... 29
5-5
Preset Timing ................................................. 31
● To change screen size [Screen Size] ............... 17
● To adjust brightness of non-display area
[Border Intensity] .............................................. 17
2-6
Power Indicator/EIZO Logo Display Setting
......................................................................... 18
● To turn off the Power indicator while a screen is
displayed [Power Indicator Setting] .................. 18
● To display EIZO logo
[EIZO Logo Appearing Function] ...................... 18
6
CONTENTS
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1
•
•
•
•
•
•
•
•
•
•
•
•
Features
Dual-input compliant (DVI-I and D-sub mini 15-pin connectors)
DVI digital input (TMDS) compliant
Horizontal scan frequency: Analog: 24 - 80 kHz, Digital: 31 - 76 kHz
Vertical scan frequency: Analog: 49 - 76 Hz (1600 × 1200: 49 - 61 Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
Resolution: 1600 dots × 1200 lines
Compatible with frame synchronization mode (59 - 61 Hz)
Smoothing (soft - sharp) function for adjustment of enlarged images
BrightRegulator function incorporated
FineContrast mode to allow the best mode for screen display
The utility software “ScreenManager Pro for LCD” (for Windows) to control
the monitor from a PC with mouse/keyboard is included (refer to the EIZO
LCD Utility Disk).
Height adjustable stand
Ultra slim bezel
Portrait/Landscape display available
1-2
Buttons and Indicators
Chapter 1 Features and Overview
7
8
Chapter 1 Features and Overview
To make useful settings/adjustments
Adjustment menu (Refer to below for operation)
Information/Language
Page 20
● [Information] to check settings, usage time, etc.
● [Language] to select Adjustment manu language.
Set the off timer
● [Off Timer] to set the monitor power off time
……………………………………… see page 16
Change the screen size
● [Screen Size] to change screen size
……………………………………… see page 17
● [Border Intensity] to change the brightness of nondisplayed area of image …………… see page 17
Locking Adjustment
Page 18
● [Adjustment Lock] to lock operation of the monitor
EIZO Logo Display Setting
Page 18
● [EIZO Logo Appearing Function] to display or not
to display the EIZO logo
Power Indicator Setting
● [Power Indicator Setting] to turn off the indicator
while the screen is displayed ……… see page 18
Connecting Cables
Page 21
● 3-1 Connecting Two PCs to the Monitor
● 3-2 Connecting Peripheral USB Devices
Adjustment menu settings
● [Menu Size/Menu Position/Menu Off Timer/
Translucent/Orientation] to change Adjustment
menu settings ……………………… see page 19
Resume the factory default settings
● [Reset] to reset all settings ………… see page 20
Connect two PCs
● [Input Signal] to set auto-switching of input signals
……………………………………… see page 21
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press
. The main menu appears.
(2) Select a function with
/
/
/
, and press
. The sub menu appears.
(3) Select a function with
/
/
/
, and press
. The adjustment/setting menu appears.
(4) Adjust the selected item with
/
/
/
, and press
. The setting is saved.
[Exiting Adjustment menu]
.
(1) Choose <Return> from the sub menu and press
(2) Choose <Menu Off> from the main menu and press
.
NOTE
• The Adjustment menu can also be exited by pressing
twice quickly.
• <Menu off> or <Return> can also be selected by pressing the
button twice in the Main menu or Sub menu.
Chapter 1 Features and Overview
9
Chapter 2 Settings and Adjustments
2-1
Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
● Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to
“readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures.
Item
Overview
For Windows
For Macintosh
○
○
A “readme.txt” or “Readme” file
Monitor information file (INF file)
Available for setting the best resolution
and refresh rate for the monitor.
○
−
Color Profiles (ICC Profiles)
Color profiles
○
○
Screen Adjustment Program
Available for easy adjustments of the
monitor screen following adjustment
patterns and procedures on the
screen.
○
○
A utility software program to control
monitor adjustments from a PC using
its mouse and keyboard.
(A PC must be connected to the
monitor with the supplied USB cable.)
Refer to the description later.
○
−
ScreenManager Pro for LCD (for
Windows) application software
WindowMovie Checker Software
WindowMovie is a function of
ScreenManager Pro for LCD.
For more information, refer to the
User’s Manual of ScreenManager Pro
for LCD on the disk.
User’s Manual of this monitor (PDF file)
● To use ScreenManager Pro for LCD
For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk.
To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable.
[Connection]
(1) Connect the USB port (downstream) of a USB compatible PC (or other USB hub) and the monitor’s USB port
(upstream) with the supplied USB cable.
Upstream
(2) The USB function is set up automatically upon connection of the USB cable.
10
Chapter 2 Settings and Adjustments
2-2
Screen Adjustment
Digital Input
Attention
• Wait 20 minutes or more from
monitor power on before starting
adjustments.
(This period of time is required to
stabilize the operation of internal
electronic components.)
When digital signals are input, images are displayed correctly based on the
preset data of the monitor.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the first time or when the settings of the PC in use are updated.
[Adjustment Procedure]
• Automatic Adjustment
1
Press
.
A message “Your setting will be lost if you press again now” appears for
five seconds.
2
Press
NOTE
• Auto adjustment is available using
. If satisfactory adjustment
cannot be obtained with this button,
perform advanced adjustments using
the Adjustment menu.
• Use “Screen Adjustment Program” on
the supplied EIZO LCD Utility Disk.
again while the message is displayed.
The Auto Adjustment function begins (showing a running status message)
to adjust clock, phase, display position, and resolution automatically.
If satisfactory adjustment cannot be obtained with the
button,
perform the adjustment following the procedure below. When the
screen is displayed correctly, go to step 5 “Range Adjustment”.
Attention
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (DOS prompt window, for
example) or when a black background
(wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
• Advaced Adjustment
3
NOTE
Run the Screen Adjustment Program.
Load the EIZO LCD Utility Disk on the PC, and start the Screen
Adjustment Program compatible with the PC in use.
After the program starts up, perform the adjustment in step 4 following the
instructions of the program.
• For how to start the Screen
Adjustment Program, refer to
“readme.txt” or the “Readme” file.
When you are using a Windows PC,
you can run the program directly from
the start menu of the disk.
• If no adjustment program is available
for your PC, display a checkerboard
pattern on the screen (see below) and
go to the following steps.
Chapter 2 Settings and Adjustments
11
4
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
.
The <Clock> menu appears.
(2) Adjust the clock with
or
, and press
NOTE
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
.
The adjustment is completed.
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press
Attention
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
.
The <Phase> menu appears.
(2) Adjust the phase with
or
, and press
.
The adjustment is completed.
● To correct screen position [Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Position> from the <Screen> menu, and press
.
The <Position> menu appears.
(2) Adjust the position with
/
/
/
to display the image
properly in the display area of the monitor.
12
Chapter 2 Settings and Adjustments
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock].”
(Clock → Phase → Position)
5
Adjust the signal output range
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Choose <Range Adjustment> from the <Screen> menu, and press
.
A message “Your setting will be lost it you press AUTO button” appears.
(2) Press
while the message is displayed.
The output range is adjusted automatically to display images with the
maximum color gradation.
All the adjustments using the “Screen Adjustment Program” are completed.
Attention
6
Change the smoothing setting.
● To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed, the characters or lines of
the displayed image may be blurred.
• [Smoothing] is disabled when the
screen is displayed with a resolution
of 1600 × 1200 or 800 × 600.
• Blurring is not eliminated completely
because the screen is enlarged display.
(1) Choose <Screen> from the Adjustment menu, and press
.
(2) Choose <Smoothing> from the <Screen> menu, and press
.
The <smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp)
with
or
, and press
.
The <smoothing> menu appears.
Chapter 2 Settings and Adjustments
13
2-3
Color Adjustment
Simple adjustment [FineContrast mode]
This function allows you to select the best display mode for monitor brightness,
etc.
● FineContrast Mode
An appropriate display mode is selectable out of five modes.
Mode
Purpose
Custom
Available for making desired setting.
sRGB
Suitable for color matching with sRGB compatible
peripherals.
Text
Suitable for displaying texts for word processing or
spreadsheets.
Picture
Suitable for displaying images such as photos or picture
images.
Movie
Suitable for playing back animated images.
FineContrast mode name
Example: Custom
Displays current mode.
NOTE
● To select FineContrast mode name
(1) Press
.
The FineContrast menu appears at the lower left of the screen.
(2) One of five modes is displayed in turn each time
to quit the operation.
(3) Press
14
Chapter 2 Settings and Adjustments
is pressed.
• The Adjustment menu and the
FineContrast mode name cannot be
displayed at the same time.
• This menu ends automatically when 2
seconds pass after the
button is
pressed.
Advanced Adjustments [Adjustment menu]
Attention
Independent setting and saving of color adjustment are available for each
FineContrast mode.
● To select an appropriate mode for images
✓: Adjustment/setting available
Icon
−: Factory setting
Function
FineContrast mode
Custom
sRGB
Text
Picture
Movie
Brightness
✓
✓
✓
✓
✓
Temperature
✓
−
✓
✓
✓
Gamma
✓
−
✓
−
−
Saturation
✓
−
✓
✓
✓
Hue
✓
−
✓
✓
✓
Gain
✓
−
−
−
−
Reset
✓
−
✓
✓
✓
Menu
Brightness
Description
To adjust the full screen
brightness as desired
Adjustment range
0 to 100%
• Perform [Range Adjustment] before
starting color adjustment for analog
input signals.
Refer to “To adjust color gradation
automatically” on page 12.
• The FineContrast mode cannot be
changed during color adjustment. Set
the FineContrast mode in advance
with
.
• Wait 20 minutes or more from
monitor power on before starting the
color adjustment.
(It takes about 20 minutes for stable
operation of internal electronic
components.)
• Choose [Reset] from the Color menu
to revert to the default setting (factory
setting) of the color tone of the
FineContrast mode selected.
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
NOTE
• You can also adjust the brightness by pressing
after adjustment.
Press
Temperature To select a color
temperature
or
.
4000K to 10000K in units of 500K
(including 9300K).
NOTE
• The values shown in the Kelvin (K) are available only as
reference.
• The setting automatically turns “OFF” if a value under 4,000K
or over 10,000K is set.
Gamma
To set a gamma value
1.8/2.0/2.2
NOTE
• The Adjustment menu and the
FineContrast mode name cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of FineContrast mode.
NOTE
• Digital signal input is recommended for gamma value setting.
Saturation
To adjust color saturation
–128 to 127
Setting the minimum (–128) turns
the image to a monochrome
screen.
Attention
• This function does not enable to display every color gradation.
Hue
To change the flesh color,
etc.
–32 to 32
Attention
• This function does not enable to display every color gradation.
Gain
To adjust red, green, and
0 to 100%
blue to a desired color tone Adjust the respective brightness of
respectively
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• Values shown in percentage are available only as reference.
• The <Temperature> setting invalidates this setting. The
<Gain> setting returns to the default setting.
Chapter 2 Settings and Adjustments
15
Menu
Reset
Description
Adjustment range
To reset the color
settings of the selected
FineContrast mode to the
default settings.
Select [Reset].
● To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Select a desired function from the <Color> menu, and press
.
The selected function menu appears.
(3) Adjust the selected item with
/
/
/
, and press
.
The adjustment is completed.
2-4
Off Timer Settings
● To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a specified time
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
[Off Timer System]
Timer
ON time (1H - 23H)
Monitor
Operating
Last 15 min. in “ON time” Advance
“ON time” expired
Notice*1
Power Off
Power Indicator
Blue
Attention
Flashing blue
Off
*1 When
is pressed during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Off Timer> from the <Others> menu, and press
.
.
The <Off Timer> menu appears.
(3) Select “Enable” with
or
.
(4) Set a monitor ON time (1 to 23 hours) with
The Off Timer setting is completed.
[Resumption Procedure]
.
Press
16
Chapter 2 Settings and Adjustments
or
, and press
.
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.
2-5
Screen Size Selection
● To change screen size [Screen Size]
This function allows you to change the screen size when a low-resolution image
is displayed.
Menu
Function
Displays an image in full screen. Images are distorted in
Full (default setting) some cases because the vertical rate is not equal to the
horizontal rate.
Enlarged
Displays an image in full screen. In some cases, a blank
horizontal or vertical border appears to equalize the
vertical rate and the horizontal rate.
Normal
Displays images with the specified resolution.
Example: Image size 1280 × 1024
Full
(Default setting)
Enlarged
Normal
(1600×1200)
(1500×1200)
(1280×1024)
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Screen Size> from the <Others> menu, and press
.
The screen size setting window appears.
(3) Select “Full,” “Enlarged,” or “Normal” with
or
, and press
.
The screen size setting is completed.
● To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal”
or “Enlarged” mode.
Border
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Border Intensity> from the <Others> menu, and press
.
The <Border Intensity> menu appears.
(3) Adjust border intensity with
or
, and press
.
The border intensity adjustment is completed.
Chapter 2 Settings and Adjustments
17
2-6
Power Indicator/EIZO Logo Display
Setting
● To turn off the Power indicator while a screen is displayed
[Power Indicator Setting]
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Power Indicator> from the <Others> menu, and press
.
The <Power Indicator> menu appears.
(3) Select “Disable” with
or
, and press
.
The Power Indicator setting is completed.
● To display EIZO logo [EIZO Logo Appearing Function]
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
[Procedure]
(1) Press
to power off the unit.
(2) Press
again while pressing
.
The EIZO logo does not appear on the screen.
[Resetting]
(1) Press
to power off the unit.
(2) Press
again while pressing
.
The logo appears again.
2-7
Locking Buttons
● To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked
(Enter button) Adjustments/settings using
Adjustment menu
(Auto adjustment button)
•
Buttons that cannot
be locked
•
(Power button)
•
•
(Input signal selection button)
(Mode button) FineContrast mode name selection
•
/
•
[Procedure]
(1) Press
to turn off the unit.
(2) Press
again while pressing
(Control buttons) Brightness adjustment
.
The screen is displayed with the adjustment lock.
[Unlocking]
(1) Press
to turn off the unit.
(2) Press
again while pressing
.
The screen is displayed with the adjustment lock released.
18
Chapter 2 Settings and Adjustments
NOTE
• The logo appears with the default
setting.
2-8
Setting Adjustment menu Display
● To update menu settings [Menu Size/Menu Position/
Menu Off Timer/Translucent/Orientation]
Menu Size
Change the Adjustment menu size using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Size> from the <Menu Settings> menu, and press
The <Menu Size> menu appears.
(4) Select “Enlarged” using
or
, and press
.
The menu size setting is completed.
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Position> from the <Menu Settings> menu, and press
.
The <Menu Position> menu appears.
(4) Select a menu position with
/
/
/
, and press
.
The menu position setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
NOTE
• The display time of the FineContrast
mode name remains unchanged.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
(3) Choose <Menu Off Timer> from the <Menu Settings> menu,
and press
.
.
The <Menu Off Time> menu appears.
(4) Choose “Enable” with
or
.
(5) Choose an Off Time (15/30/45/60 seconds) with
and press
.
or
,
The menu off timer setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Translucent> from the <Menu Settings> menu, and press
.
The <Translucent> menu appears.
(4) Adjust the transparency for menu display with
or
, and press
.
The transparency setting is completed.
Orientation
The orientation of the Adjustment menu can be turned 90 degrees.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Orientation> from the Others menu, and press
.
.
The <Orientation> menu appears.
(3) Select “Landscape” or “Portrait” with
or
, and press
.
The orientation setting is completed.
Chapter 2 Settings and Adjustments
19
2-9
Viewing Information/Setting Language
● To check settings, usage time, etc.
[Information]
This function allows you to check settings, model name, serial number, and
usage time of the monitor.
(1) Choose <Information> from the Adjustment menu, and press
.
The <Information> menu appears.
(2) Then, press
to check settings, etc.
NOTE
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
● To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese
.
(1) Choose <Language> menu from the Adjustment menu, and press
The <Language> menu appears.
(2) Select a language with
/
/
/
, and press
.
The language setting is completed.
2-10 Setting BrightRegulator
● [BrightRegulator] to set “Enable” or “Disable” for
BrightRegulator.
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose < BrightRegulator> from the <Others> menu, and press
.
The BrightRegulator setting window appears.
(3) Select “Enable” or “Disable” with
or
, and press
.
The BrightRegulator setting is completed.
2-11 Resumption of Default Setting
● To reset color adjustment [Reset]
NOTE
Resume the default settings (factory settings) for color adjustment.
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu, and press
.
.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and press
.
The reset operation is completed.
● To reset all settings [Reset]
Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and press
The reset operation is completed.
20
Chapter 2 Settings and Adjustments
.
.
• For default settings, refer to “Main
default settings (factory settings)” on
page 28.
Chapter 3 Connecting Cables
3-1
Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
DIV-I connector
(SIGNAL1)
Attention
• When using an optional signal cable
(FD-C16), be sure to connect the
D-sub mini 15-pin connector to the
PC, and the DVI-I connector to the
monitor. Wrong connection may
result in no picture display.
D-sub mini
15-pin Connector
(SIGNAL2)
PC 1
PC 2
D-sub mini 15-pin
D-sub mini
15-pin
Signal cable
(FD-C16 option)
Signal cable
(supplied
MD-C87)
D-sub mini 15-pin
Analog
Signal cable
(supplied
MD-C87)
Analog
Analog
Example 2
Signal cable
(supplied with
FD-C39)
Digital
Example 1
DVI
Selecting input signal
Input Signal Selection button
Switch the input signal with
. Input signal switches each time
is
pressed. When the signal is switched, the active signal type (Analog or Digital)
appears at the top right corner of the screen for two seconds.
Chapter 2 Settings and Adjustments
21
● To set auto-switching of input signals [Input Signal]
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor
automatically displays signals of another PC.
Priority setting
Function
Auto
When either PC is turned off or enters
the power-saving mode, the monitor
automatically displays signals of
another PC.
Manual
The monitor does not detect the PC’s
signals automatically. Select an active
input signal with
.
[Input signal setting]
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
.
The <Input Signal> menu appears.
(3) Select “Auto” or “Manual” with
or
, and press
.
The Input Priority setting is completed.
3-2
Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
● Required System Environment
(1) A PC equipped with a USB port or another USB hub connected to
a USB compatible PC
(2) Windows 98/Me/2000/XP or Mac OS 8.5.1 or later
(3) Supplied EIZO USB cable (MD-C93)
● Connection Procedure (Setup of USB Function)
(1) Connect the monitor first to a PC using the signal cable, and run
the PC.
(2) Connect the supplied USB cable between the downstream USB
port of a USB compatible PC (or another USB hub) and the
monitor’s upstream USB port.
(3) When the USB function setup is completed, the monitor functions
as a USB hub allowing connection to various peripheral USB
devices through its downstream USB ports.
The USB function is set up automatically upon connection of the
USB cable.
22
Chapter 3 Connecting Cables
Attention
• This monitor may not work depending
on PC, OS or peripheral devices to be
used.
For USB compatibility of peripheral
devices, contact their manufactures.
• If the Main Power switch of the
monitor is not turned on, the
connected downstream peripheral
devices do not work.
• Even if the monitor enters the sleep
mode, all the devices connected
to the USB ports (upstream and
downstream) work. (Therefore the
monitor power consumption varies
with connected devices even in the
sleep mode.)
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems → See No.3 - No.11.
• Other problems → See No.12 - No.18.
Problems
1.
2.
Possible cause and remedy
No picture
• Power indicator does not light.
• Check whether the power cord is connected correctly. If
the problem persists, turn off the monitor, and then turn it
on again a few minutes later.
• Power indicator is lighting blue.
• Power indicator is lighting yellow.
•
•
•
•
The message below appears.
• This message appears when no signal is input.
(This is displayed for about 40 seconds.)
This message appears when the signal is not input
correctly even when the monitor functions properly.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with
.
• The message below shows that the input signal is
out of the specified frequency range. (Such signal
frequency is displayed in red.)
Example:
• Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
Check brightness setting.
Turn on the PC.
Switch the input signal with
.
Operate the mouse or keyboard.
3.
Display position is incorrect.
• Adjust image position so that it is displayed properly
within the display area using the <Position> adjustment.
• If the problem persists, use the graphics board’s utility
software if available to change the display position.
4.
Vertical bars appear on the screen or a part of the
image is flickering.
• Adjust using <Clock> from <Screen> menu at the
Adjustment menu.
5.
Whole screen is flickering or blurring.
• Adjust using <Phase>.
6.
Characters are blurred.
• Adjust using <Smoothing>.
7.
Upper part of the screen is distorted as shown
below.
• This is caused when both composite sync (X-OR)
signal and separate vertical sync signal are input
simultaneously. Select either composite signal or
separate signal.
Chapter 4 Troubleshooting
23
Problems
Possible cause and remedy
8.
The screen is too bright or too dark.
• Adjust <Brightness>. (The LCD monitor backlight has a
fixed life span. When the screen becomes dark or begins
to flicker, contact your local dealer.)
9.
Afterimages appear.
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
10. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen.
failure.
11. Interference patterns or fingerprints remain on the • Leave the monitor with a white screen. The symptom
screen.
may disappear.
12. Noise appears on the screen.
• Select 1 to 4 in <Signal Filter> from the <Screen> menu
to change the mode.
13. The [Smoothing] icon on the Adjustment menu
[Screen] cannot be selected.
• <Smoothing> is disabled with a resolution of 1600 ×
1200 or 800 × 600
• <Smoothing> cannot be selected when the resolution is
doubled with <Screen Size> menu. (Example: 640 × 480
is enlarged to 1280 × 960)
14. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function.
15. The
button does not function.
button does not function when digital signal is
• The
input.
• Check whether the buttons are lockd.
• This function works correctly when an image is fully
displayed over the Windows or Macintosh display area.
It does not work properly when an image is displayed
only on a part of the screen (DOS prompt window, for
example) or when a black background (wallpaper, etc.) is
in use.
This function does not work correctly with some graphics
boards.
16. Frequency does not change after the utility disk is
installed on Windows 98/Me/2000/XP.
• Change the input signal frequency using the graphics
board’s utility software.
17. USB function cannot be set up.
• Check whether the USB cable is connected correctly.
• Check whether the PC and OS are USB compliant. (For
USB compliance of the respective devices, consult their
manufacturers.)
• Check the PC’s BIOS setting for USB when using
Windows 98/Me/2000/XP. Refer to the manual of the PC
for details.)
18. The PC does not work/USB devices connected to
the monitor do not work.
Check whether the USB cable is connected correctly.
• Change the cable connection to another USB port. If the
PC works normally with this port change, contact your
local dealer. (Refer to the manual of the PC for details.)
• Try the following:
• Reboot the PC.
Connect the PC directly to the peripheral devices.
When the devices work normally without being connected
to the monitor (USB hub), contact your local dealer.
24
Chapter 4 Troubleshooting
5-1
Attaching an Arm (Option)
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1
Hold the upper and lower centers of the stand joint cover, and
slide sideways to remove it.
2
Attention
• When using another manufacturer’s
arm or stand, confirm the following in
advance.
• Clearance between the holes of the
arm fixing screws: 100 mm × 100
mm (VESA compliant)
• Strong enough to support weight of
the monitor unit (except the stand)
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
3
Remove the stand. (Prepare a screwdriver.)
Unscrew the two screws (M4 × 10mm) securing the unit and the stand
with the screwdriver.
4
Attach the monitor to the arm or stand.
Secure the stand to the monitor with four screws (M4 × 12mm) using a
screwdriver.
Fixing screws: M4 × 12mm 4 pcs
Chapter 5 Reference
25
5-2
Cleaning
Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning
paper.
• Remove persistent stains gently with a cloth dampened with little water, and
then clean the LCD panel again with a dry cloth for better finishing.
26
Chapter 5 Reference
Attention
• Never use any solvents or chemicals,
such as thinner, benzene, wax,
alcohol, and abrasive cleaner, which
may damage the cabinet or LCD
panel.
NOTE
• Optional ScreenCleaner is
recommended for cleaning the panel
surface.
5-3
Specifications
LCD Panel
21.3-inch (540 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Vertical 178°, Horizontal 178° (CR: 10 or more)
Dot Pitch
0.270 mm
Horizontal Scan Frequency
Analog: 24 - 80 kHz (Automatic)
Digital: 31 - 76 kHz
Vertical Scan Frequency
Analog: 49 - 76 Hz (Automatic)
(1600 × 1200: 49 - 61 Hz)
Digital: 59 - 61 Hz
(VGA TEXT: 69 - 71 Hz)
Resolution
1600 dots × 1200 lines
Max. Dot Clock
Analog: 162 MHz
Digital: 162 MHz
Max. Display Colors
16.77 million colors
Display Area (H × V)
432 mm × 324 mm
Power Supply
100 - 120 VAC ±10% 50/60 Hz, 0.7 A
200 - 240 VAC ±10% 50 Hz, 0.4 A
Power Consumption
Max.:70 W (USB device connected)
Power saving mode: 2 W or less (for single signal input with no USB device
connected)
Power switch Off: 1 W or less
Input Signal Connectors
DVI-I connector, D-sub mini 15-pin connector
Analog Input Signal (Sync)
a) Separate, TTL, positive/negative
b) Composite, TTL, positive/negative
Analog Input Signal (Video)
Analog, positive (0.7 Vp-p/75 Ω)
Digital Signal Transmission
System
TMDS (Single Link)
Video Signal Memory
Analog signal: 45 (preset: 22)
Digital Signal: 10 (preset: 0)
Plug & Play
VESA DDC 2B
Dimensions (Main unit)
465 mm (W) × 453 - 535 mm (H) × 208.5 mm (D) (18.3” (W) × 17.8”-21.1” (H) × 8.2” (D))
Dimensions (without stand)
465 mm (W) × 361 mm (H) × 64 mm (D) (18.3” (W) × 14.2” (H) × 2.52” (D))
Weight (Main unit)
9.7 kg (21.4 lbs)
Weight (without stand)
6.7 kg (14.8 lbs)
Environmental Conditions
Operating temperature: 0 °C - 35 °C
Storage temperature: –20 °C - 60 °C
Relative humidity: 30% - 80% (no condensation)
USB
Standard
Rev. 2.0 compliant
Port
Upstream port × 1, Downstream port × 2
Transmission rate
480 Mbps (High speed)
12 Mbps (Full speed)
1.5 Mbps (Low speed)
Supply current
Downstream: Max. 500 mA/1 port
Chapter 5 Reference
27
Main default settings (factory settings)
BrightRegulator
Enable
Smoothing
3
FineContrast Mode
Custom
Screen Size
Full
Input Signal
Auto
Off Timer
Disabled
Setting
Language
Size
Normal
Off Timer
45 seconds
English
Outside Dimensions
unit : mm (inch)
28
Chapter 5 Reference
• D-sub mini 15-pin connector
3
4
5
10
15
9
1
2
8
7
6
14 13 12 11
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
Red
6
Red ground
11
(Short-circuited to pin 10)
2
Green
7
Green ground
12
Data (SDA)
3
Blue
8
Blue ground
13
H. Sync
4
Ground
9
NC
14
V. Sync
5
NC
10
Ground
15
Clock (SCL)
• USB port
Upstream
Downstream
Contact No.
Signal
Remarks
1
VCC
Cable power
2
– Data
Serial data
3
+ Data
Serial data
4
Ground
Cable ground
Option List
Cleaning Kit
5-4
EIZO ScreenCleaner
Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for image display.
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma
Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a highcontrast image.
Chapter 5 Reference
29
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to
adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that range
adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. The EIZO S2100
monitor consists of 1600 horizontal pixels and 1200 vertical pixels. At a resolution of 1600 × 1200, all pixels are
illuminated as a full screen (1:1).
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
30
Chapter 5 Reference
5-5
Preset Timing
The following table shows factory preset video timing.
Mode
Dot clock
VGA 640×480@60Hz
25.2 MHz
VGA 720×400@70Hz
28.3 MHz
Macintosh 640×
480@67Hz
Macintosh 832×
624@75Hz
Macintosh 1152×
870@75Hz
Macintosh 1280×
960@75Hz
30.2 MHz
57.3 MHz
100.0 MHz
126.2 MHz
PC-9801 640×400@56Hz
21.0MHz
PC-9821 640×400@70Hz
25.2 MHz
VESA 640×480@72Hz
31.5 MHz
VESA 640×480@75Hz
31.5 MHz
VESA 800×600@56Hz
36.0 MHz
VESA 800×600@60Hz
40.0 MHz
VESA 800×600@72Hz
50.0 MHz
VESA 800×600@75Hz
49.5 MHz
VESA 1024×768@60Hz
65.0 MHz
VESA 1024×768@70Hz
75.0 MHz
VESA 1024×768@75Hz
78.8 MHz
VESA 1152×864@75Hz
108.0 MHz
VESA 1280×960@60Hz
108.0 MHz
VESA 1280×1024@60Hz
108.0 MHz
VESA 1280×1024@75Hz
135.0 MHz
VESA 1600×1200@60Hz
162.0 MHz
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Frequency
Horizontal: kHz
Vertical: Hz
31.47
59.94
31.47
70.09
35
66.67
49.73
74.55
68.68
75.06
74.76
74.76
24.83
56.42
31.5
70.15
37.86
72.81
37.5
75
35.16
56.25
37.88
60.32
48.08
72.19
46.88
75
48.36
60
56.48
70.07
60.02
75.03
67.5
75
60
60
63.98
60.02
79.98
75.03
75
60
Attention
Polarity
Negative
Negative
Negative
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
Chapter 5 Reference
31
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according to
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in focus
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in order to improve the working environment for the user
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
● Energy-saving mode after a certain time - beneficial both for the user and environment
● Electrical safety
Emissions
● Electromagnetic fields
● Noise emissions
Ecology
● The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
● Restrictions on
● chlorinated and brominated flame retardants and polymers
● heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
32
Chapter 5 Reference
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan S2100
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
*
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclesed signal cable)
- Stereo mini-jack cable
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
33
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1600 ×
1200 RGB analog, 0,7 Vp-p und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus
ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte
Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
34
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem
Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der
Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren,
benutzen Sie bitte folgende Rufnummer: 02153-73 35 00. Weitere Informationen finden Sie auch unter der
Internet-Adresse: www.eizo.de.
Recycling Information for customers in Switzerland:
All recycling information is placed in the SWICO’s website.
http://www.swico.ch
Recycling-Information für Kunden in der Schweiz:
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes SWICO.
http://www.swico.ch
Renseignements de recyclage pour les clients en Suisse:
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION DE BRAN CHE
SWICO.
http://www.swico.ch
Recycling Information for customers in USA:
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.
http://www.eizo.com
Återvinnings information för kunder i Sverige:
All information om återvinning finns på Eizo Europe AB:s hemsida:
www.eizo.se
35