Electrolux 12830 Washer/Dryer User Manual

132984010.qxd
24/06/2005
16:30
Pagina
1
LAVAMAT TURBO 12830
Washer-dryer
Instruction Booklet
12830
PREWASH
WASH
1200
900
700
500
RINSE HOLD
PREWASH
RINSE
TIME
SAVER
DRYING
TIME
DELAY
START
STAIN
SENSITIVE
START
PAUSE
REMAINING
TIME
DELICATE SPIN
95
EXTRA RINSE
SOFTENERS
SPIN
DEL. RINSE
DRYING
WOOL
SILK
END
DOOR
OFF
SPIN
DRAIN
COLD
30
40
COLD
30
DELICATES
40
COTTONS
LINEN
ECONOMY
60
50
40
30
DRYING
60
EASY
CARES
50
40
EASY IRON
DRYING
40
PERFEKT IN FORM UND FUNKTION
132984010.qxd
24/06/2005
16:30
Pagina
2
Dear customer,
Please read these operating instructions carefully and pay particular
attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and
pass it on to any future owners.
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct
functioning of the appliance.
This symbol guides you, step by step, in the operation of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of the appliance.
Tips and information about economical and ecological use of the
machine are marked with the clover symbol.
Should any problems arise, this booklet provides instructions on how to
solve them by yourself; see section “Something not working?”.
If this information is not sufficient, please contact our nearest SERVICE
CENTRE (address and telephone numbers are indicated on the enclosed
leaflet).
Printed on recycled paper.
People who think ecologically, act accordingly....
2
132984010.qxd
24/06/2005
16:30
Pagina
3
Contents
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tips for environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Main features of your washer-dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programme selector dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programme Option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PREWASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
STAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SENSITIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
START/PAUSE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SPIN SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RINSE HOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TIME SAVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DRYING TIME button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DELAY START button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Programme progress display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cancelling a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Altering a programme which is running. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Opening the door after the programme has started. . . . . . . . . . . . . . . . . 16
Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Before the first wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Preparing the wash cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Sorting out and preparing the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Weight of laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Types of fabric and care labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
Detergents and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
Which detergent? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
And in which form?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Fabric conditioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3
132984010.qxd
24/06/2005
16:30
Pagina
4
Contents
Preparing the drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Garments not suitable for drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Drying symbols on garment labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Duration of the drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Modification of the drying time or degree of drying. . . . . . . . . . . . . . . . . . . 24
Fibre residue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Additional drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
How to wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Add detergent and additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Selection of the desired wash programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selection of the desired options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selection of the SPIN SPEED or RINSE HOLD option . . . . . . . . . . . . . . . . . . . 26
Selection of the EXTRA RINSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Selection of the DELAY START option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Starting the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
At the end of the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Automatic washing and drying (NON-STOP programme) . . . . . . . . . . . . 30
How to dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Drying only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Programme charts: wash and special programmes . . . . . . . . . . . . . . . 31-32
Programme chart: timed drying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Consumption data for timed drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
After each wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Periodical cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Drain pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Emergency emptying out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Frost precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Something not working? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-41
Unsatisfactory washing results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4
132984010.qxd
24/06/2005
16:30
Pagina
5
Contents
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-45
Standard Guarantee Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
European Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Instructions for installation and electrical connection. . . . . . . . . . . . . . . 48
Safety instructions for the installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Front view and side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Installation on a suspended floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Water drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Permanent connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5
132984010.qxd
24/06/2005
16:30
Pagina
6
Safety instructions
Your safety is of paramount importance, please ensure you read this
instruction book before installing or using this appliance.
General safety
• Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause injury or
serious malfunctioning. Contact your local AEG/ELECTROLUX Service
Force Centre.
• Never start the machine if the mains cable is damaged or the control
panel or worktop are damaged allowing inner components to be
accessible.
• Unplug the appliance before carrying out any cleaning or maintenance operations.
• Never pull the mains cable to remove the plug from the socket;
always take hold of the plug itself.
• During high temperature wash programmes and during the drying
cycle, the door glass may get hot.
• Let the water cool down before carrying out emergency emptying or
before opening the door in an emergency.
Installation
• Follow the installation instructions carefully.
• Carry out a first wash without laundry (COTTONS 60, with half the
amount of detergent) in order to remove any manufacturing residue
from the tub and the drum.
6
132984010.qxd
24/06/2005
16:30
Pagina
7
Safety instructions
Child safety
• This appliance is designed to be operated by adults. Children should not
be allowed to tamper with the controls or play with the appliance.
• Pets and children have been known to climb into washing machines.
Please check the drum before use.
• Keep all packaging well away from children.
• Keep all detergents in a safe place out of children’s reach.
• When disposing of the appliance, cut off the mains cable, and destroy
the plug. Disable the door catch to prevent young children being
trapped inside.
During use
• Always unplug the appliance and turn off the water tap after use.
• This appliance is designed for domestic use only. If the machine is
used for any other purposes or is not used correctly, the manufacturer accepts no responsibility for any possible damage that might occur.
• For safety reasons, the appliance must not be modified.
• Use only detergents suitable for washing machines and follow the
manufacturer’s instructions.
• Garments which have been in contact with flammable solvents
should not be machine washed.
• Dyes and bleaching agents may only be used if specifically permitted
by the manufacturer of these products. We cannot be held liable for
any damage.
7
132984010.qxd
24/06/2005
16:30
Pagina
8
Disposal
Packaging materials
The materials marked with the symbol
are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in
appropriate collection containers.
Machine
Use authorised disposal sites for your old appliance. Help to keep your
country tidy!
The symbol
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of
this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Tips for environmental protection
To save water, energy and to help protect the environment, we recommend
that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order
to save detergent, water and time (the environment is protected too!).
• Use the energy saving programme (Economy) when washing
normally soiled garments.
• The machine works more economically if it is fully loaded (for both
washing and drying cycles).
• When small loads are washed, use only half to two thirds of the recommended amount of detergent.
8
132984010.qxd
24/06/2005
16:30
Pagina
9
• The machine will consume less energy if the laundry is adequately
spun before being dried.
• With adequate pre-treatment, stains and limited soiling can be
removed; the laundry can then be washed at a lower temperature.
Main features of your washer-dryer
• Programme and temperature setting using the programme selector.
• Stain programme for effectively treating stained washing.
• Energy saving programme (Economy) for normally soiled cotton
items.
• Speed for the final spin can be reduced to 900, 700 or 500 rpm.
• RINSE HOLD: the laundry is left immersed in the final rinse water to
prevent creasing.
• DELAY START (delayed start): programme start can be delayed by
30 minutes to 23 hours (e.g. to times with a more economical power
rate).
• Programme progress display showing the programme steps selected
and the programme phase which is running.
• Because of its gentle washing action, the special wool cycle washes
your garments with extreme care.
• The drying programmes will enable you to have dry and soft laundry in a short time.
• 3-compartment drawer for detergent and fabric softener.
• Unbalance detection device: to prevent vibration during spinning.
9
132984010.qxd
24/06/2005
16:30
Pagina
10
Description of the appliance
Front view
Detergent drawer
Control panel
12830
PREWASH
WASH
1200
900
700
500
RINSE HOLD
PREWASH
RINSE
TIME
SAVER
STAIN
DRYING
TIME
DELAY
START
SENSITIVE
START
PAUSE
REMAINING
TIME
DELICATE SPIN
95
SOFTENERS
SPIN
DEL. RINSE
DRYING
WOOL
SILK
END
DOOR
OFF
SPIN
DRAIN
EXTRA RINSE
COLD
30
40
COLD
30
DELICATES
40
COTTONS
LINEN
ECONOMY
60
50
40
30
DRYING
60
EASY
CARES
50
40
EASY IRON
DRYING
40
Door
Drain pump
Adjustable feet
10
132984010.qxd
24/06/2005
16:30
Pagina
11
Description of the appliance
Control panel
C
D
E
F
G
12830
PREWASH
WASH
1200
900
700
500
RINSE HOLD
PREWASH
RINSE
TIME
SAVER
STAIN
DRYING
TIME
DELAY
START
SENSITIVE
START
PAUSE
REMAINING
TIME
A
B
C
D
E
F
G
H
J
=
=
=
=
=
=
=
=
=
B
95
DRAIN
SOFTENERS
SPIN
DEL. RINSE
DRYING
WOOL
SILK
END
H
OFF
SPIN
EXTRA RINSE
DOOR
A
DELICATE SPIN
COLD
30
40
COLD
30
DELICATES
COTTONS
LINEN
ECONOMY
60
50
40
30
DRYING
60
EASY
CARES
50
40
40
40
EASY IRON
DRYING
J
Option buttons
START/PAUSE button
Spin speed button
Time saver button
Drying time button
Delay start button
Display
Programme progress display
Programme selector dial
Programme selector dial
The programme selector determines the type of washing cycle (e.g. water
level, drum movement, number of rinses), the washing temperature and
enables the required drying programme to be selected according to the
type of laundry.
The selector dial is divided into 6 sections:
12830
• Cottons-Linen
COTTONS
DELICATE SPIN
OFF
LINEN
SPIN
• Easy Cares (synthetics)
95
ECONOMY
DRAIN
60
• Delicates
SOFTENERS
50
DEL. RINSE
40
• Wool/silk
(hand washing)
COLD
30
30
DRYING
WOOL
• Special programmes
40
EASY
60
SILK
CARES
COLD
50
30
40
• Reset programme O/OFF
40
40
EASY IRON
DELICATES
DRYING
The selector dial can be turned
either clockwise or anticlockwise.
Position ECONOMY corresponds to the ENERGY SAVING programme
for normally soiled laundry, extended washing time (cannot be combined with TIME SAVER). The washing temperature will decrease.
11
132984010.qxd
24/06/2005
16:30
Pagina
12
Description of the appliance
Position 40°C Easy iron.
In this position the laundry is gently washed and spun to avoid any
creasing. In this way ironing is easier.
Position COLD = cold wash
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on
and an acoustic signal can be heard. When they are pressed again, the
pilot lights go out.
When an incorrect option is selected, the button light flashes for 2 seconds, an acoustic signal sounds and in the display the Err message
appears.
PREWASH
The machine performs a prewash cycle. The prewash cycle ends with a
short spin in programmes for Cotton and Easy cares, and with emptying of the water without spinning for Delicates.
This option is not available with the wool programme and cannot be
used with STAIN option.
For use when washing heavily soiled laundry.
STAIN
To treat heavily soiled or stained laundry with stain remover (extended
main wash with time optimised stain action phase, not selectable for
wool or programmes with temperatures lower than 40°C).
This function cannot be used with PREWASH.
SENSITIVE
By depressing this button the washing intensity will be reduced. The
machine adds one rinse in the programmes for COTTONS and EASY
CARES. This option cannot be used with EASY IRON.
12
132984010.qxd
24/06/2005
16:30
Pagina
13
Description of the appliance
START/PAUSE button
This button has two functions:
a) Start
After having selected the required programme, press this button to start
the machine. The relevant pilot light stops flashing and remains static.
If you have selected the DELAY START option, the machine starts its
hourly countdown.
b) Pause
To interrupt a programme which is running, press the START/PAUSE
button: the information on the display remains lit and the
START/PAUSE pilot light starts to flash.
To restart the programme from the point at which it was interrupted,
press the START/PAUSE button again.
SPIN SPEED
Press this button to reduce the maximum speed of the final speed proposed
by the machine for the selected programme or to select RINSE HOLD option.
The maximum spin speed for cotton is 1200 rpm, for easy cares, wool
and delicates 900 rpm.
Important: By depressing the SPIN SPEED and DRYING TIME buttons at
the same time the machine will perform an extra rinse (see page 27).
RINSE HOLD
By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the pilot light END on the programme progress display illuminates, the
pilot light DOOR is red and the door is blocked to indicate that the water
must be emptied out.
To empty out water:
• select the DRAIN programme to empty out the water without spinning.
• select the SPIN/DELICATE SPIN programmes for spinning.
• select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to O/OFF
and then to the DRAIN, SPIN or DELICATE SPIN programmes.
The RINSE HOLD option cannot be selected for the automatic WASHING &
DRYING programme.
13
132984010.qxd
24/06/2005
16:30
Pagina
14
Description of the appliance
TIME SAVER
TIME
SAVER
By pressing this button the washing time is reduced. For
use when washing lightly soiled laundry.
This option is not available with wool and economy
programme.
Important: By depressing the TIME SAVER and SPIN SPEED buttons at
the same time for about 3 seconds the acoustic signal can be deactivated (see page 27).
DRYING TIME button
If you wish to carry out a timed programme of dryness push the button
until the drying time you want appears in the display according to the
fabrics (cotton or easy cares) you have to dry.
For COTTON and EASY CARES you can select a drying time from 10 minutes to 130 minutes.
DELAY START button
The wash programme can be delayed from 30, 60, 90 minutes and then
1 hour by 1 hour up to a maximum of 23 hours.
The button must be pressed after selecting the programme and
before pressing the START/PAUSE button.
The figures indicating the delay appear for about 3 seconds in the display. The duration of the selected wash programme is then displayed.
After depressing the START/PAUSE button, the machine starts its hourly
countdown.
To annul the preset delay, press the START/PAUSE button, then press the
DELAY START button until the symbol 0’ is displayed.
Then press the START/PAUSE button again to restart the programme.
Display
The display shows the following information:
• Duration of the selected programme (in minutes), calculated automatically on the basis of the maximum recommended load for each type
of fabric.
• Selected drying time (max. 130 minutes for cotton and easy cares).
After the programme has started, the time remaining is updated every
minute.
• When the programme has finished, a steadily lit zero is displayed.
• Delayed start, (23 hours max.) programmed using the special button.
14
132984010.qxd
24/06/2005
16:30
Pagina
15
Description of the appliance
The countdown is updated every hour and by 30 minutes the last 2 hours.
• Alarm code indicating a fault in the machine operation (see page 38).
PREWASH
WASH
RINSE
EXTRA RINSE
SPIN
DRYING
Programme progress display
END
By selecting the wash programme, the pilot lights correDOOR
sponding to the various phases making up the programme
come on.
After the machine has started, only the running phase pilot light stays
on. When the programme has finished, the END pilot light comes on.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the O/OFF position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to O and then to the
DRAIN, SPIN or DELICATE SPIN programme.
Altering an option which is running
To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After selecting the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O/OFF and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE button again the machine restarts with the newly selected programme.
15
132984010.qxd
24/06/2005
16:30
Pagina
16
Description of the appliance
Opening the door after the programme has started
To open the door set the machine to PAUSE by pressing the START/PAUSE
button.
The DOOR light on the control panel beside the START/PAUSE button
indicates if the door can be opened:
• green light: the door can be opened;
• red light: the door cannot be opened;
The door can be opened if:
• the machine is not already heating or drying;
• the water level is not above the bottom edge of the door;
• the drum is not turning.
If you need to open the door, switch the machine off by turning the selector dial to position O/OFF, and wait about 3 minutes before opening the
door (pay attention to the temperature and the level of the water in the
tub).
16
132984010.qxd
24/06/2005
16:30
Pagina
17
Description of the appliance
Detergent dispenser drawer
Compartment for prewash or stain remover. The prewash detergent is added
at the beginning of the wash programme. The stain remover is added during the STAIN-Action phase in the main wash.
Compartment for powder or liquid detergent used for main wash.
It is emptied at the beginning of the wash cycle.
Compartment for liquid additives (fabric softener, starch).
It is emptied at the last rinse.
The quantity of additives must not exceed the “MAX” mark in the
drawer.
Before the first wash
Before your first wash, we recommend that you run a cotton cycle at
95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the
machine.
17
132984010.qxd
24/06/2005
16:30
Pagina
18
Preparing the wash cycle
Sorting out and preparing the laundry
• Sort out the laundry according to type of fabrics and care labels (see
“Types of fabric and care labels”).
• Empty pockets.
• Remove any metal parts (safety pins, clips, etc.).
• To prevent the laundry from getting damaged and forming bundles,
it is advisable to close zips, button up pillowcases and quilt covers and
tie up loose straps such as those of aprons.
• Turn double faced items inside out (sleeping bags, anoraks, etc.)
• Turn coloured knitted fabrics, woollens and fabrics with trim inside
out.
• Wash small and delicate items (baby socks, tights) inside a laundry net
or in a pillow case closed with a zip, or in larger socks.
• Treat curtains with special care. Remove all metal or plastic hooks or
put them in a net or a bag. We decline any responsibility in case of
damage.
• Whites and coloureds must be washed separately: white items can
loose their whiteness.
• New coloured fabrics often have excess dyes; it is advisable to wash
them separately for the first time.
• Wash small and large items together; this improves the washing result
and the laundry is better distributed during spinning.
• Shake out garments before putting them into the machine.
• Insert each garment separately.
18
132984010.qxd
24/06/2005
16:30
Pagina
19
Preparing the wash cycle
Weight of laundry
Sort of laundry
Approximate
dry weights
Bathrobes
1200 g
Work shirts
300-600 g
Quilt covers
700 g
Sheets
500 g
Blouses
100 g
Hand towels
200 g
Tea towels
100 g
Shirts
200 g
Pillowcases
200 g
Night-gowns/Pyjamas
200-250 g
Tablecloths
200-300 g
Underwear
250 g
Types of fabric and care labels
The labels on garments help you to select the most suitable wash programme. The laundry should be sorted out according to the type of fabric and the instructions indicated on care labels.
Temperatures indicated on labels are always maximum temperatures.
Cotton 95
Linen and cottons marked with this symbol can be washed at high temperatures.
Cotton 60
Linen and cottons marked with this symbol are colourfast and can be
washed at 60°C.
Cotton 40 30
Garments marked with these symbols have delicate colours, therefore
the washing temperature must not exceed these values.
Synthetics 40 60
Mixed and synthetic fabrics marked with these symbols require a gentle
wash programme and they must therefore be washed using the specific
programme.
19
132984010.qxd
24/06/2005
16:30
Pagina
20
Preparing the wash cycle
Delicates 40 30
Microfibres, synthetics or curtains marked with these symbols require a
very gentle treatment.
The DELICATES programme is suitable for this type of fabric.
40
30
Woollens and particularly delicate items
Fabrics such as wool, wool mix or silk marked with this symbol are particularly sensitive to machine washing.
The WOOL programme
is suitable for this type of fabric.
The wool wash cycle of this machine has been approved by Woolmark
for the washing of machine washable Woolmark products provided that
the garments are washed according to the instructions on the garment
label and those issued by the manufacturer of this machine. M9605.
If the label has the symbol
be machine washed!
20
(do not wash), the garments must not
132984010.qxd
24/06/2005
16:30
Pagina
21
Preparing the wash cycle
Detergents and additives
Which detergent?....
To ensure you obtain the best wash results from your appliance, it is
important to use the right detergent in your everyday wash, and only
detergents recommended for use in automatic machines.
To maintain the appearance of your clothes and household textiles and
to make them last longer you should use different types of detergent
for different washes, whether for whites, colours or delicates.
WHITES
We recommend the Ariel product range which is
biological and designed to provide excellent cleaning and stain removal even at low temperatures.
NON BIOLOGICAL
If you prefer to use a non biological detergent, which
does not contain enzymes we recommend Fairy. Fairy
provides good cleaning and stain removal.
COLOUREDS
For coloured items you should use a detergent which is
designed to clean while maintaining the original
colour. Ariel Color does not contain bleach and therefore helps to preserve colours.
DELICATE ITEMS
When washing delicates such as woollens, you
should use a product which is specially designed to
care for fine fabrics. Dreft Automatic is suitable for
woollens and other delicates.
LAUNDRY BLEACH
For additional stain removal you may wish to use a
product such as Ace Gentle Bleach which is used in
addition to your chosen detergent. Ace is suitable for all
washable fabrics including silks, woollens and coloureds.
STAIN REMOVER
For heavily soiled garments to be washed with STAINAction, you should use stain removers such as VANISH
In-Wash, Ecover Stain Salt and GloWhite Booster.
NEW
TOUGHER ON
STAINS
IN-WASH
STAIN REMOVER
FOR WHITES AND COLOURS
JUST ADD TO DETERGENT
21
132984010.qxd
24/06/2005
16:30
Pagina
22
Preparing the wash cycle
And in which form?
Not only are there different types of detergent, but they are also available
in different forms. Whether you chose a powder or liquid in traditional or
compact form is your own personal choice.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do not sprinkle
powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of the detergent
drawer marked with the symbol
, start the machine immediately
upon placing the detergent in the dispenser drawer.
Alternatively the detergent is measured into the specially designed dosing
device* which should be placed on top of the laundry, and at the back of
the machine drum.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also known) are available
in liquid or powder form, and generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most economical usage. Pour the
detergent directly into the dispenser drawer, or alternatively measure the
detergent into the specially designed dosing device* which should be
placed on top of the laundry, and at the back of the machine drum.
* If you use a dosing device in a washer dryer, please ensure the dosing
device/ball is removed before carrying out a drying programme.
FABRIC CONDITIONERS
These are ideal for improving “softness”, and also reduce static cling on
easy-cares and make ironing easier. They are available in two types:
• For example Lenor liquid fabric softener, for use in the
washing machine/washer dryer. The liquid fabric
softener should be poured into the compartment
marked with the symbol . Follow the manufacturer’s dosage instructions and never exceed the MAX
level.
• Bounce conditioning sheets for use in a tumble dryer. We recommend the conditioning sheets are
pinned (using a safety pin) to an article of laundry
and placed in the tumble dryer.
22
132984010.qxd
24/06/2005
16:30
Pagina
23
Preparing the drying cycle
As a dryer, the machine works on the condensation principle.
Therefore, the water tap must be open and the drain hose must
drain water into a sink or into the drain pipe, even during the drying cycle.
Load
Sort of laundry
max. load
(dry weight)
Linen and cottons
3 kg
Easy cares
2 kg
Warning:
Loads of washed laundry exceeding these values must be divided
before being dried, otherwise poor results will be obtained.
Garments not suitable for drying
• Particularly delicate items such as synthetic curtains, woollen and silk,
garments with metal inserts, nylon stockings, bulky garments such as
anoraks, bedcovers, quilts, sleeping bags and duvets must not be
machine dried.
• Garments padded with foam-rubber or materials similar to foamrubber must not be machine dried; they represent a fire hazard.
• Also, fabrics containing residues of setting lotions or hair sprays, nail
solvents or similar solutions must not be machine dried in order to
avoid the formation of harmful vapours.
23
132984010.qxd
24/06/2005
16:30
Pagina
24
Preparing the drying cycle
Drying symbols on garment labels
Always look at the garment label to check whether garments can be
machine dried.
The following symbols refer to drying:
Machine drying is usually possible
Normal drying (normal temperature)
Gentle drying (reduced temperature)
Do not machine dry
Duration of the drying cycle
The drying time can vary according to
• the final spin speed;
• the required degree of drying (extra dry, cupboard dry or iron dry);
• the type of laundry;
• the size of load.
The usual drying times for the timed programmes are indicated in the programme chart (pag. 33). As you become more familiar with the appliance,
you will discover the drying times that best suit your needs according to
the various type of fabric. It is a good idea to make a note of these times.
Modification of the drying time (just in case of washing + drying)
If you wish to modify the drying time when a drying programme is running, first depress START/PAUSE button to set the machine to PAUSE. After
modifying the time or degree, depress START/PAUSE again to continue the
programme.
Fibre residue
After drying fluffy fabrics, such as new towels, it is advisable to perform
the DEL. RINSE programme to be sure that any residue that may remain
in the tub is completely removed and does not stick to garments dried
afterwards.
After each drying cycle the filter should be checked and cleaned.
Additional drying
Should the laundry still be too wet at the end of the programme, set
another short drying time.
Warning! To prevent the formation of creases or shrinking of fabrics, avoid excessive drying.
24
132984010.qxd
24/06/2005
16:30
Pagina
25
How to wash
Max. load
- cottons
- easy cares and delicates
- wool, silk and
(handwash)
6 kg
2.5.kg
2 .kg
Load the laundry
Open the door.
Place the laundry in the drum, one item at a time. Distribute laundry as
evenly as possible. Close the door.
Add detergent and additive
Pull the drawer
out till it stops.
Pour the main
wash detergent
into compartment .
If you wish to
perform a prewash, a STAINAction programme, pour detergent or stain remover into compartment .
Important!
Do not use normal detergent for the STAIN-Action programme,
always use a STAIN remover.
Pour the fabric softener into compartment
“MAX” mark.
Close the drawer gently, pushing it fully in.
without exceeding the
25
132984010.qxd
24/06/2005
16:30
Pagina
26
How to wash
Selection of the desired wash programme
Turn the programme selector dial
to the desired position: the lights
corresponding to the different
phases making up the selected
programme light up.
The display shows the duration of
the programme.
12830
PREWASH
WASH
RINSE
DELICATE SPIN
95
DRAIN
EXTRA RINSE
SOFTENERS
SPIN
DEL. RINSE
DRYING
WOOL
SILK
END
DOOR
OFF
SPIN
COLD
30
40
COLD
30
DELICATES
ECONOMY
60
50
40
30
DRYING
60
EASY
CARES
50
40
40
40
EASY IRON
DRYING
TIME
SAVER
Selection of the desired options
The options available depend on the degree of soiling
of the laundry. The corresponding light comes
PREWASH
on.
COTTONS
LINEN
STAIN
SENSITIVE
Selection of the spin speed or RINSE HOLD option
It is possible to select a lower spin speed by means of
the relevant button; the light corresponding to the
selected speed comes on.
When selecting the RINSE HOLD option, the laundry is
left immersed in the final rinse water.
1200
900
700
500
RINSE HOLD
If the spin speed is not reduced , the final spin speed will be as follows:
- cottons, linens
1200 r.p.m.
- easy cares
900 r.p.m.
- delicates
900 r.p.m.
- wool/silk
(hand washing)
900 r.p.m.
26
132984010.qxd
24/06/2005
16:30
Pagina
27
How to wash
EXTRA RINSE
This appliance is designed for saving water. However, for people with
a very delicate skin (allergic to detergents) it may be necessary to
rinse the laundry using an extra quantity of water (extra rinse).
The extra rinse is available only with the cotton, easy care and delicates.
Selection of the EXTRA RINSE option
Press simultaneously SPIN SPEED and DRYING TIME buttons for about
3 seconds: the EXTRA RINSE light in the programme progress display
comes on.
This function stays permanently on. To remove it press SPIN SPEED
and DRYING TIME buttons again until the EXTRA RINSE light comes
off.
Selection of the DELAY START option
To delay starting of a programme, press the DELAY START button
before starting the machine. The figures corresponding to the
selected delay will be displayed for about 3 seconds, after which the
duration of the selected programme will appear on the display.
When the START/PAUSE button is pressed, the selected delay will
appear again on the display and the machine starts its countdown.
Selection of the NO BUZZER option
Press simultaneously TIME SAVER and SPIN SPEED buttons s for about
3 seconds: the acoustic signal is deactivated at the end of the cycle,
when selecting the programmes and in case of an incorrect option
selection .
By depressing these 2 buttons again the acoustic signal is reactivated.
27
132984010.qxd
24/06/2005
16:30
Pagina
28
How to wash
Starting the programme
1. Check that the water tap is open.
DOOR
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start at the end of the countdown.
At the start of the programme, if the “END” light blinks for few seconds, the acoustic signal sounds and on the display appears E40, that
indicates that the door is open. Close the door and press the
START/PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry or cancel the delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Cancel the delay time: press the START/PAUSE button. Press the
DELAY START button until on the display appears 0’, if you wish to
cancel it. Press the START/ PAUSE button again to let the programme restart.
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.
PREWASH
WASH
RINSE
EXTRA RINSE
SPIN
DRYING
END
DOOR
Display
The time to the end of the programme decreases minute by
minute and appears on the display.
28
REMAINING
TIME
132984010.qxd
24/06/2005
16:30
Pagina
29
How to wash
At the end of the programme
The machine stops automatically. A zero appears on the display.
The END light comes on in the programme progress display, the
START/PAUSE light is off and the DOOR light is green.
Turn the selector dial to O/OFF.
If the RINSE HOLD option has been selected the RINSE HOLD light
remains lit and the DOOR light is red and the door is blocked to indicate that the water must be emptied out before opening the door
either
To empty out water:
• select the DRAIN programme to empty out the water without spinning.
• select the SPIN/DELICATE SPIN programmes for spinning.
• select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to O/OFF
and then to the DRAIN, SPIN or DELICATE SPIN programmes.
At the end of the programme the selector dial must be turned to position O/OFF.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleasant smells.
29
132984010.qxd
24/06/2005
16:30
Pagina
30
How to wash
Automatic washing and drying
(NON-STOP programme)
Warning! For NON-STOP programmes, it is also essential not to exceed
the maximum load sizes of 3 kg for cotton and 2 kg for easy cares.
Load the laundry.
Add detergent and additive.
Do not use a dosing device when carrying out automatic washing and
drying programme.
Select the wash programme.
Select the required options by means of the relevant buttons. If possible,
do not select a spin speed lower than that proposed by the appliance to
avoid a too long drying time so saving energy.
When automatically washing and drying it is not possible to select a spin
speed lower than 900 r.p.m. for cottons and 700 r.p.m. for easy cares.
Select the drying time.
Start the programme by depressing the START/PAUSE button.
At the end of the programme, turn the selector dial to O/OFF.
Remove the laundry.
How to dry
Drying only
Max. load
- cottons
3 kg
- easy cares
2 kg
During the drying programme the water tap must be open and the
drain hose must be correctly positioned.
Turn the programme selector dial to DRYING for cottons or easy cares.
If you wish to carry out the timed drying press the relevant button until
the time you want appears in the display.
Press the START/PAUSE button to start the programme.
At the end of the cycle turn the programme selector dial to O/OFF and
remove the laundry.
30
132984010.qxd
24/06/2005
16:30
Pagina
31
Programme chart
Wash programmes
Wash
Temp.
programme
Fabrics
Additional
functions
Consumption*
Max.
Energy
Water Duration
load
kWh
lt.
min.
Cotton and linen,
for example normally soiled work
White
95°-60°
garments, sheets,
Cottons
household linen,
underwear, towels.
STAIN
PREWASH
TIME SAVER
SENSITIVE
EXTRA RINSE
RINSE HOLD
SPIN SPEED
5 kg
1.90
47
141
Cotton and linen, for
example normally to
lightly soiled sheets
and household linen.
STAIN
PREWASH
SENSITIVE
EXTRA RINSE
RINSE HOLD
SPIN SPEED
6 kg
1.02
49
142
5 kg
1.10
44
120
2.5 kg 0.85
50
89
2.5 kg 0.55
53
58
52
57
ECONOMY
60°
60°-50° Coloured cotton or
Coloured
40°-30° linen fabric, shirts,
cottons
underwear, towels.
Synthetic fabrics,
60°-50°
underwear,
40°
coloured garments,
Easy cares
EASY
non-shrink shirts,
IRON
blouses.
STAIN
PREWASH
TIME SAVER
SENSITIVE
EXTRA RINSE
RINSE HOLD
SPIN SPEED
STAIN
PREWASH
TIME SAVER
SENSITIVE
EXTRA RINSE
RINSE HOLD
SPIN SPEED
STAIN
PREWASH
40°-30° Delicate fabrics, for TIME SAVER
Delicates
COLD example curtains. EXTRA RINSE
RINSE HOLD
SPIN SPEED
Wool/silk 40°-30 Wool, wool mixtures, silk and
COLD
handwash.
RINSE HOLD
SPIN SPEED
2 kg
0.35
In compliance with EC directive 92/75, the consumption figures indicated on the
energy label refer to the “ECONOMY 60°C” wash programme for cotton.
* The consumption data shown on this chart is to be used as a guide only, as it
may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature
for each wash programme.
31
132984010.qxd
24/06/2005
16:30
Pagina
32
Programme chart
Special programmes
Programme
Del.
Rinse
Consumption*
DescripAdditional Max.
Programme phases
Energy
Water Duration
tion
functions load
kWh
lt.
min.
This programme can 3 rinses with liquid
RINSE HOLD
be used for additive.
5 kg 0.05
45
23
SPIN SPEED
rinsing hand Short spin.
washed gar- (900 rpm max)
ments.
Hand washed
1 rinse with liquid
garments to
additive.
Softeners
be starched
Long spin.
or softened.
Drain
For emptying
out the last
rinse water in
programmes
with the Rinse
Hold option
Spin
Separate spin
Long spin.
for cottons.
Delicate
spin
O
/OFF
The water is emptied
out.
RINSE HOLD
5 kg
SPIN SPEED
/
SPIN SPEED 5 kg
Separate spin
for easy cares Short spin.
SPIN SPEED 2.5 kg
and delicate (900 rpm max)
fabrics.
For cancelling the
programme which
is running or to
switch the machine
off.
/
18
23
/
/
2
/
/
10
/
/
6
/
/
/
* The consumption data shown on this chart is to be used as a guide only, as
it may vary depending on the quantity and type of laundry, on the inlet
water temperature and on the ambient temperature.
32
132984010.qxd
24/06/2005
16:30
Pagina
33
Programme chart
Timed Drying
Degree of drying
Extra dry
Ideal for towelling
materials
Type of fabric
Cotton and
linen
(bathrobes,
bath towels
etc.)
Cotton and
linen (towels,
T-shirts,
bathrobes)
Cupboard dry (*)
Suitable for items to
Easy cares and
put away without
mixed fabrics
ironing
(jumpers,
blouses,
underwear,
household
linen)
Iron dry
Suitable for ironing
Cotton and
linen (sheets,
tablecloths,
shirts, etc.)
Max. load
Spin speed
Drying time
mins
3 kg
1200
95-105
1.5 kg
1200
50-60
3 kg
1200
85-95
1.5 kg
1200
45-55
2 kg
900
70-80
1 kg
900
35-45
3 kg
1200
70-80
1.5 kg
1200
40-50
(*) The CUPBOARD DRY drying programme for cotton is the reference programme for the Energy Label data, in compliance with standard EEC 92/75.
33
132984010.qxd
24/06/2005
16:30
Pagina
34
Consumption data for timed drying
The values shown in the chart have been obtained in laboratory tests.
They may vary when the appliance is used at home, but they can be
used as a guide.
Spin speed
Max
load
Water
litres
Energy
kWh
Duration
minutes
Cotton
Extra dry
1200
3 kg
29
2.50
95-105
Cotton
Cupboard dry
1200
3 kg
26
2.20
85-95
Easy cares
Cupboard dry
900
2 kg
20
1,20
70-80
Cotton
Iron dry
1200
3 kg
21
1.70
70-80
Degree of drying
34
132984010.qxd
24/06/2005
16:30
Pagina
35
Cleaning and maintenance
After each wash
At the end of the wash programme, pull the dispenser drawer out a little to let it dry.
Leave the door ajar to allow air to circulate.
If the machine is not used for a prolonged period:
Close the water tap and unplug the appliance.
Maintenance Wash
With the use of low temperature washes it is possible to get a build up
of residues inside the drum.
We recommend that a maintenance wash be performed on a regular basis.
To run a maintenance wash:
The drum should be empty of laundry.
Select the hottest cotton wash programme.
Use a normal measure of detergent, must be a powder (such as Ariel
Futur).
Periodical cleaning
Exterior
Clean the outside of the cabinet with soap and water only. Rinse with
clean water and dry.
Important: do not use methylated spirits, solvents or similar products
to clean the cabinet.
Detergent dispenser drawer
After a while, detergents and fabric softeners leave deposits in the
drawer.
Clean the drawer,
from time to time,
by rinsing it under
a running tap. To
remove the drawer from the
machine, press the
button in the rear
left-hand corner.
35
132984010.qxd
24/06/2005
16:30
Pagina
36
Cleaning and maintenance
To facilitate cleaning, the top part of the
additive compartment can be removed.
Detergent can also accumulate inside the
drawer recess: clean it with an old toothbrush.
Refit the drawer after cleaning.
Door seal
Regularly check to see, if there are deposits or
foreign objects in the rubber seal behind the
door and remove them.
Drain pump
The pump should be inspected regularly and particularly if
the machine does not empty and/or spin
the machine makes an unusual noise during draining due to objects
such as safety pins, coins etc. blocking the pump.
Proceed as follows:
Disconnect the appliance.
If necessary wait until the water has cooled down.
Open the pump door.
Place a container
close to the pump
to collect any
spillage.
Release the emergency emptying
hose, place it in
the container and
remove its cap.
When no more water comes out, unscrew the pump and remove it.
Always keep a rag nearby to dry up spillage of water when removing
the pump.
36
132984010.qxd
24/06/2005
16:30
Pagina
37
Cleaning and maintenance
Remove any
objects from the
pump impeller by
rotating it.
Put the cap back
on the emergency
emptying hose
and place the lat- P1097
ter back in its
seat.
Screw the pump fully in.
Close the pump door.
Water inlet filter
If you notice that the machine is taking longer to fill, check that the
filter in the water inlet hose is not blocked.
Turn off the water tap.
Unscrew the hose from the tap.
Clean the filter in the hose with a stiff brush.
Screw the hose back onto the tap.
Emergency emptying out
If the water is not discharged, proceed as follows to empty out the
machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the the pump door;
• place a bowl on the floor and place the end of the emergency
emptying hose into the bowl. Remove its cap. The water should drain
by gravity into the bowl. Whe the bowl is full, put the cap back on
the hose. Empty the bowl. Repeat the procedure until water stops
flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after having plugged it;
• screw the pump again and close the door.
37
132984010.qxd
24/06/2005
16:30
Pagina
38
Frost precautions
If the machine is installed in a place where the temperature could drop
below 0°C, proceed as follows:
• Close the water tap and unscrew the water inlet hose from the tap.
• Place the end of the emergency emptying hose and that of the inlet
hose in a bowl placed on the floor and let water drain out.
• Screw the water inlet hose back on and reposition the emergency
emptying hose after having put the cap on again.
By doing this, any water remaining in the machine is removed, avoiding
ice forming and consequently damage to the appliance.
When you use the machine again, make sure that the ambient temperature is above 0°C.
Something not working?
If during the spin cycle the machine makes an unusual
whistling noise, different from the noise made by traditional washing machines, this is due to a new type of
motor.
If water is not visible in the drum, this is due to
the modern technology of new washing
machines that use less water than traditional
machines.
Troubleshooting
If a problem arises, you can try to solve it yourself following the
instructions below.
If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be
charged even if requested within the guarantee period.
During machine operation the following alarm codes may be displayed:
- E10: problem with the water supply
- E20: problem with water draining
- E40: door open
At the same time the END light flashes and an acoustic signal sounds.
Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all checks, the problem persists, contact your local AEG/ELECTROLUX Service Force Centre.
38
132984010.qxd
24/06/2005
16:30
Pagina
39
Something not working?
Problem
Possible cause
The main electrical fuse or
the fuse in the plug has
blown.
The door is not properly
closed (E40).
The machine does not work
The plug is not connected.
The START button has not
been pressed.
The DELAYED START
option has been selected.
Solution
Replace the fuse.
Close the door; the click
of the lock should be heard.
Insert the plug.
Press the button.
Check the selected delay on
the display.
The water tap is closed (E10). Open the water tap.
The water inlet hose is
squashed or kinked (E10).
The machine does not fill
The machine fills then
empties immediately
Check the whole length of the
hose and remove the kink.
The small filter of the water Clean the filter.
inlet hose is clogged (E10).
The door is not properly
closed (E40).
Close the door.
The end of the drain hose
is too low.
Place the hose at the right
height (see Installation
section).
The drain hose is
squashed or kinked (E20).
Check the whole length of
the hose and remove the
kink.
The drain pump or the
drain hose are clogged (E20).
The machine does not
empty and/or does not spin The RINSE HOLD option
(stop with water in drum)
has been selected.
Clean the pump or check
the hose.
Empty out the water by
selecting the DRAIN or
SPIN programme.
The laundry is not evenly
Redistribute the laundry
distributed inside the drum. manually in the drum.
39
132984010.qxd
24/06/2005
16:30
Pagina
40
Something not working?
Problem
Possible cause
Solution
Too much detergent has
been used.
Measure detergent
according to the
manufacturer’s instructions.
An unsuitable detergent
has been used that
creates too much foam.
Use a suitable washing
machine detergent.
One of the connectors on
the water inlet hose is
There is water on the floor
leaking.
Check that the hose is
firmly screwed on at both
ends.
The drain pump has not
been properly screwed on
after cleaning.
Fully screw the pump into
place.
The cap on the emergency Replace the cap on the
emptying hose has not been emergency emptying hose
replaced after cleaning the after cleaning the pump.
pump.
The machine vibrates or is
noisy
The door will not open
The transit bolts have
not been removed.
Check that the machine
has been unpacked as
described in the Installation
section.
The feet have not been
adjusted.
Carefully level the machine.
There is little laundry in
the drum.
Correct operation of the
machine is not affected.
The programme is still
running and the drum
is turning.
Wait until the end of the
programme before opening
the door.
The water level is above the
bottom edge of the door.
Before opening the door,
the water must be emptied
out.
The machine is heating the Wait until the end of the
water or drying the
heating or drying phase.
clothes.
In any case to open the
door the DOOR light must
green.
40
132984010.qxd
24/06/2005
16:30
Pagina
41
Something not working?
Problem
Possible cause
Solution
The unbalance detection
device that prevents
excessive vibration during
spinning has cut in.
If the laundry is not evenly
distributed inside the drum
at the beginning of the
spin cycle, the machine
detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, at a lower speed,
if the laundry is not evenly
distributed.
If, after about 15 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme.
The water tap is not open
(E10).
Open the water tap.
Spinning starts late or the
machine does not spin
The drain pump is clogged. Clean the pump.
The drying time of
Select the required function.
dryness has not been selected.
The machine will not dry or An appropriate drying time
the laundry is not dry
of dryness
enough
has not been chosen.
There is too much laundry
inside the appliance.
Select the appropriate
drying time suitable for
the required degree of
drying, according to the
type of fabric (cottons or
synthetics).
Reduce the load.
41
132984010.qxd
24/06/2005
16:30
Pagina
42
Something not working?
Unsatisfactory washing results
If the laundry looks grey and lime scale is found in the drum
• Too little detergent has been used.
• An unsuitable detergent has been used.
• Stubborn stains have not been treated prior to washing.
• The programme/temperature has not been correctly selected.
If grey stains remain on the laundry
• Laundry stained with ointments, grease or oil has been washed with
an insufficient amount of detergent.
• The temperature selected for the wash programme was too low.
• Fabric softener - especially the concentrated type - has come into
direct contact with the laundry. Wash these stains immediately and
pour fabric softener carefully.
Foam is still visible even after the last rinse
• Modern detergents often produce foam, even in the last rinse. However the laundry has been completely rinsed.
White residue is left on the laundry
• This is due to insoluble components in modern detergents and is
therefore not the result of insufficient rinsing. Shake or brush the
laundry. In future, it may be better to turn garments inside out before
washing them. Check the choice of detergent; try using liquid detergents.
42
132984010.qxd
24/06/2005
16:30
Pagina
43
Technical data
Height x Width x Depth
Depth with door opened
Height adjustment
Net weight
Load (depending on programme)
Use
Drum speed during washing
Drum speed during spinning
Water pressure
84x60x60 cm
101.5 cm
± 10 mm approx.
77 kg approx.
6 kg
domestic
max. 55 rpm
1200/900/700/500 rpm
0.05-0.8 MPa
This appliance complies with the following EC directives:
- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive
93 / 68 / EEC
- 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.
43
132984010.qxd
24/06/2005
16:30
Pagina
44
Service & Spare Parts
If after carrying out the necessary checks there is still a fault with your
appliance please contact your local AEG/ELECTROLUX Service Force Centre.
In guarantee customers should ensure that the suggested checks in
the “Troubleshooting” section have been made as the engineer will
make a charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
Service & Spare Parts
If you require a service engineer or wish to purchase spare parts, contact your local AEG/ELECTROLUX Service Force Centre, by telephoning:
08705 929 929
For the address of your local Service Force Centre and further
information about Service Force, please visit the website at
www.serviceforce.co.uk.
Help us to help you
Please determine your type of enquiry before telephoning. When you
contact us we need to know:
1.Your name, address and post code.
2.Your telephone number.
3.Clear and concise details of the fault.
- What is the fault?
- When does the fault occur?
- Does the multi-display issue an error-message (E and a number)?
4.The model, production number and production identification number.
5.Date of purchase.
Mod. L12830
Type P6347488
IPX4
Prod.No. 914601118 00
230-240V~50Hz 2050 W
10 A
Ser.No.
44
132984010.qxd
24/06/2005
16:30
Pagina
45
This information can be found on the rating plate, so you have these
numbers to hand we recommed you write them below.
Prod. No. . . . . . . . . . . . . . . . . . . . . . .
Ser.-No. . . . . . . . . . . . . . . . . . . . . . . .
Customer care
For general enquiries regarding your AEG/ELECTROLUX appliance, or
further information on AEG/ELECTROLUX products please contact our
Customer Care Department at the address below or visit our website at
www.aeg.co.uk. .
Customer Care Department
AEG/ELECTROLUX Major Appliances
Addington Way
Luton
Bedfordshire LU4 9QQ
Tel: 08705 350350*
* Calls to this number may be recorded for training purposes.
45
132984010.qxd
24/06/2005
16:30
Pagina
46
Standard Guarantee Conditions
We, AEG/ELECTROLUX, undertake that if within 12 months of the date
of the purchase this AEG/ELECTROLUX appliance or any part thereof is
proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF
CHARGE for labour, materials or carriage on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.
• The appliance has been used for normal domestic purposes only, and
in accordance with the manufacturer's operating and maintenance
instructions.
• The appliance has not been serviced, maintained, repaired, taken
apart or tampered with by any person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall
become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a
premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or
neglect, the replacement of any light bulbs or removable parts of
glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly
installed or calls to appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus
those which are subject to rental agreements.
• Products of AEG/ELECTROLUX manufacture which are not marketed
by AEG/ELECTROLUX.
46
132984010.qxd
24/06/2005
16:30
Pagina
47
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for
labour and parts as exists in the new country of use for this brand or
range of products.
• This guarantee relates to you and cannot be transferred to another
user.
• Your new home is within the European Community (EC) or European
Free Trade Area.
• The product is installed and used in accordance with our instructions
and is only used domestically, i.e. a normal household.
• The product is installed taking into account regulations in your new
country.
Before you move please contact your nearest Customer Care centre,
listed below, to give them details of your new home. They will then
ensure that the local Service Organisation is aware of your move and
able to look after you and your appliances.
France
Germany
Italy
Sweden
UK
Senlis
Nürnberg
Pordenone
Stockholm
Luton
+33 (0)3 44 62 29 29
+49 (0)800 234 7378
+39 (0)800 11 75 11
+46 (0)8 672 53 60
+44 (0)8705 350350
47
132984010.qxd
24/06/2005
16:30
Pagina
48
Instructions for installation and electrical connection
Safety instructions for the installer
• This appliance is heavy, care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in
doubt, do not use it and contact the retailer.
• All internal packing must be removed before using the appliance.
Serious damage may be caused to the machine or adjacent furniture
if the protective transit devices are not completely removed. Refer to
the relevant paragraph.
• Any electrical work required to install this appliance must be carried
out by a qualified electrician or competent person.
• Any plumbing work required to install this appliance must be carried
out by a qualified plumber or competent person.
• After having installed the machine, check that it is not standing on
its electrical supply cable.
• If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the adjustable feet and the floor.
• The installation should comply with local water authority and building regulations requirements.
• Should the appliance power supply cable need to be replaced, this
should be carried out by our Service Force Centre.
48
132984010.qxd
24/06/2005
16:30
Pagina
49
Dimensions of the appliance
Front view and side view
1015
605
12830
PREWASH
WASH
1200
900
700
500
RINSE HOLD
RINSE
TIME
SAVER
DRYING
TIME
DELAY
START
STAIN
SENSITIVE
START
PAUSE
REMAINING
TIME
95
SOFTENERS
DEL. RINSE
END
WOOL
SILK
COLD
30
40
COLD
30
DELICATES
40
COTTONS
LINEN
ECONOMY
60
50
40
30
DRYING
60
EASY
CARES
50
40
40
EASY IRON
DRYING
90
DOOR
OFF
SPIN
DRAIN
SPIN
DRYING
PREWASH
DELICATE SPIN
EXTRA RINSE
25
565
Rear view
335
40
170
70
Cold water
Power cable
Drain
45
85
49
132984010.qxd
24/06/2005
16:30
Pagina
50
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
Using the supplied
spanner, unscrew
and remove the 2
rear
bottom
screws. Slide out
the 2 plastic pins.
Lay the machine
on its back, taking P1129
P0001
care not to squash
the hoses. This can be avoided by placing one
1
of the corner packing pieces between the
machine and the floor.
2
Remove the polystyrene block from the
3
bottom of the machine and release the two
plastic bags.
Carefully slide out the left-hand bag
P1124
removing it towards the right and then
downwards.
Slide out the
right-hand bag
removing it
towards the left
and then upwards.
Set the machine
P1126
P1127
upright and
remove the
remaining rear
screw. Slide out
the relevant pin.
Plug the open
holes with the
plugs which you
will find in the
P1128
P0002
plastic bag containing the instruction booklet.
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.
50
132984010.qxd
24/06/2005
16:30
Pagina
51
Installation
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by
carpets, rugs etc.
• Before placing it on small tiles, apply a rubber coating.
• Never try to correct any unevenness in the floor by putting pieces of
wood, cardboard or similar materials under the machine.
• If it is impossible to avoid positioning the machine next to a gas
cooker or coal-burning stove, an insulating panel (85x57 cm) covered
with aluminium foil on the side facing the cooker or stove, must be
inserted between the two appliances;
• The machine must not be installed in rooms where the temperature
can drop below 0°C.
• The water inlet hose and the drain hose must not be kinked.
• Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.
Levelling
Carefully level by screwing the adjustable
feet in or out. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the
floor.
Installation on a suspended floor
Suspended wooden floors are particularly susceptible to vibration. To
help prevent vibration we recommend you place a waterproof wood
panel, at least 15 mm thick under the appliance, secured to at least 2
floor beams with screws. If possible install the appliance in one of the
corners of the room, where the floor is more stable.
51
132984010.qxd
24/06/2005
16:30
Pagina
52
Installation
Water inlet (cold water connection only)
Connect the hose to a tap with a 3/4” thread.
Installation should comply with local water
authority and building regulations’ requirements.
The inlet hose is provided with a water stop
device, which protects against damage
caused by water leaks in the hose which
could develop due to natural ageing of the
hose. This fault is shown by a red sector in
the window “A”. Should this occur, turn the
water tap off and refer to your Service Force
Centre to replace the hose.
Set the hose correctly by loosening the ring
nut. After positioning the inlet hose, be sure
to tighten the ring nut again to prevent
leaks.
Do not connect to a hot water supply.
A
P0352
Water drainage
TThis appliance is designed to be permanently plumbed into your home's drainage
system using one of the following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain
hose using the “U” piece” supplied.
“U” piece
supplied
P1199
Place the drain hose into
your standpipe, which
should have an internal
diameter of approximately
38mm thus ensuring there
is an air break between the
drain hose and standpipe.
30 cm (12")
38 mm (11.2”)
standpipe
diameter
P1074
52
24/06/2005
16:30
Pagina
53
Installation
Max. 90 cm (35.4”)
When discharging into a
3 pin
standpipe ensure that the top
of the standpipe is no more
than 90 cm (35.4'') and no less
than 60 cm (23.6'') above
floor level.
The drain hose may be extended to a maximum of 4 metres.
An additional drain hose and
joining piece is available from your local Service Force Centre. The joining
piece must have an internal diameter of 18 mm.
Min. 60 cm (23.6”)
132984010.qxd
2. Onto a sink outlet spigot.
If the outlet spigot
has not been used
before, remove any
blanking plug that
may be in place.
Push the drain hose
Loop
onto the spigot and
secure with a clip if
required, ensure a
loop is formed in the drain hose (see diagram) to prevent waste from the
sink entering the washing machine.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force
Centre. The joining piece must have an internal diameter of 18 mm.
If you intend the drain hose from the machine
to empty into a sink, make sure that the sink
is empty and the plug hole is not blocked. Use
the plastic “U -Piece” supplied.
Important
Before connecting up the machine to new pipework or to pipework that has
not been used for some time, run off a reasonable amount of water to flush
out any debris that may have collected in the pipes.
53
132984010.qxd
24/06/2005
16:30
Pagina
54
Installation
In the interest of the environment
Washing machines and dishwashers should be connected
to the FOUL drainage system,
the water will then be taken
to a sewage works for treatment before being discharged
safely into a river.
It is essential that these appliances are not connected to the
surface water drainage system
as this water is discharged
directly into a river or stream
and may cause pollution.
If you require any further
advice please contact your local
water authority.
SHOWER
BATH
SINK TOILET
BIDET
WASHING
MACHINE DISHWASHER
RAINWATER
'RUN-OFF'
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
RIVER
FOUL DRAIN
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
TREATED
DISCHARGE
RIVER
Electrical connections
13 AMP
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this safety measure
not be observed.
GREEN &YELLOW
13AMP FUSE
If the plug that is fitted to your appliance is
not suitable for your socket outlet, it must be
cut off and the appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of
to prevent the hazard of shocks in case it
BROWN
BLUE
should be plugged into a 13 Amp socket in
CORD CLAMP
another part of your home.
Important
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
54
132984010.qxd
24/06/2005
16:30
Pagina
55
Installation
If you fit your own plug, the colours of the wires in the mains lead of
your appliance may not correspond with the markings identifying the
terminals in your plug, proceed as follows:
Connect the green and yellow (earth) wire to the terminal in the plug
which is marked with the letter «E» or the earth symbol
or coloured
green and yellow.
Connect the blue (neutral) wire to the terminal in the plug which is
marked with the letter «N» or coloured black.
Connect the brown (live) wire to the terminal in the plug which is
marked with the letter «L» or coloured red.
The plug moulded on to the lead incorporates a fuse. For replacement, use
a 13 Amp BS1363/A fuse. Only ASTA or BSI approved fuses should be
used.
The plug must not be used if the fuse cover/carrier is lost. The
cover/carrier is indicated by the coloured insert at the base of the plug.
A replacement cover/carrier must be obtained from your local AEG Service
Centre.
The power supply cable must be easily accessible after installing the
machine.
Permanent connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This operation should only be performed by a qualified electrician.
55
132984010.qxd
24/06/2005
16:30
Pagina
56
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
132.984.010-01-0605
Subject to change without notice
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing
machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of
approx. USD 14 billion in more than 150 countries around the world.
© Electrolux plc 2005