Use & care guide | Electrolux 318 200 937 (0411) Rev. A Oven User Manual

Use & Care Guide
Built-In Wall Oven
31 8 2 0 0 9 3 7 ( 0 411 ) R e v. A
2 Finding Information
MAKE A RECORD FOR FUTURE USE
Brand_______________________________________________________________
Purchase Date______________________________________________________
Model Number______________________________________________________
Serial Number______________________________________________________
NO
TE
NOTE
See the Features page later in this manual for the location of your product’s serial
QUESTIONS?
For toll-free telephone support in the U.S. and Canada:
1-877-4ELECTROLUX (1-877-435-3287)
For online support and internet product information:
www.electrolux.com
©2004 Electrolux Home Products, Inc.
Post Office Box 212378, Augusta, Georgia 30917, USA
All rights reserved. Printed in the USA
Finding Information
TABLE OF CONTENTS
Finding Information ........................................... 2
Make a Record for Future use .......................... 2
Questions? ........................................................ 2
Safety ................................................................... 4
Important Safety Instructions .............................. 4
Feature Overview ................................................ 7
Your Wall Oven ................................................. 7
Getting Started ................................................... 8
Oven Vent Location ........................................... 8
Installing Oven Rack Supports ........................... 8
Removing and Replacing Oven Racks .............. 8
Arranging Oven Racks ...................................... 8
Setting oven controls ........................................ 9
Control Pads Functions ..................................... 9
Setting the Clock .............................................. 10
Setting Continuous Bake
or 12 hours Energy Saving .............................. 11
Setting the Kitchen Timer .................................. 11
Setting Oven Lockout Feature ......................... 12
Setting Temperature Display ............................ 12
Setting Silent Control Operation ....................... 13
Adjusting Oven Temperature ........................... 13
Cooking Instructions ....................................... 14
Preheating ...................................................... 14
Baking ............................................................. 15
Baking Problems ............................................. 16
Convection Baking .......................................... 17
Setting Timed Bake or
Timed Convection Bake ................................... 19
Seting Delayed Timed Bake or
Delayed Timed Convection Bake .................... 20
Broiling ............................................................ 21
Convection Roasting ....................................... 23
Care & Cleaning ................................................ 24
Using the Self-Clean Feature ........................... 24
Starting Self-Cleaning Cycle ............................ 25
To Start Delayed Self-Cleaning Cycle .............. 26
General Cleaning ............................................ 27
Care and Cleaning of Stainless Steel ............... 28
To Remove and Replace Oven Door .............. 28
Special Door Care Instructions ........................ 28
To Remove the “Hidden Bake” Element Cover 29
Oven Light ...................................................... 29
Solutions to Common Problems ..................... 30
Oven Controls Beeps and Display F1 to F10 .. 30
F8 Is Displayed ............................................... 30
Installation ....................................................... 30
Entire Oven Does Not Operate ................... 30-31
Oven Light Does Not Operate ......................... 31
Self-Clean Cycle Does Not Work ..................... 31
Oven Smokes Excessively During Broiling ...... 31
Soil Not Completely Removed After
Self-Cleaning Cycle Is Completed.................... 32
Poor Baking Results ........................................ 32
Flames Inside Oven Or Smoke From Vent ....... 32
Notes .................................................................. 33
Warranty Information ....................................... 36
3
4 Safety
IMPORTANT SAFETY INSTRUCTIONS
Please read all safety instructions before using your new Electrolux wall oven.
WARNING
To reduce the risk of fire, electrical shock, or injury when using your wall oven, follow basic
precautions including the following:
• Remove all tape and packaging wrap before using the appliance. Destroy the carton and
plastic bags after unpacking the appliance. Never allow children to play with packaging
material. Do not remove the wiring label and other literature attached to the back of the wall
oven. Do not remove model/serial number plate.
• Proper Installation—Be sure your appliance is properly installed and grounded by a qualified
electrician or installer in accordance with the National Electrical Code ANSI/NFPA No. 70
(U.S.A.) or CSA C22.1, PART 1 (Canada)—latest editions and local code requirements. Install
only per installation instructions provided in the literature package for this appliance.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how
to disconnect the electrical power to the appliance at the circuit breaker or fuse box in case of
an emergency.
Electronic controllers can be damaged by cold temperatures. When you use
your appliance for the first time, or if it has not been used for a long period of time, make sure
that it has been exposed to a temperature above 0°C/32°F for at least 3 hours before connecting
it to the power supply.
• User Servicing—Do not repair or replace any part of the appliance unless specifically
recommended in the manuals. All other servicing should be done only by a qualified technician
to reduce the risk of personal injury and damage to the appliance.
• Never modify or alter the construction of the appliance by removing panels, wire covers, or any
other part of the product.
• Remove the oven door from any unused appliance if it is to be stored or discarded.
Stepping, leaning, sitting or pulling down on the door of this appliance can
result in serious injuries and may also cause damage to the appliance. Do not allow children
to climb or play around the appliance.
• Storage in or on Appliance—Flammable materials should not be stored in an oven.
This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as
well as flammable liquids. Do not store explosives, such as aerosol cans, in or near the
appliance.
Do not use the oven for storage.
Do not store items of interest to children in the cabinets above an
appliance. Children climbing on the oven can be seriously injured.
Safety
To reduce the risk of tipping of the appliance. The appliance must be
secured by properly install anti tip device. To check if devices are installed properly open the
oven door and verify that the anti-tip device are engaged see installation instructions.
• Do not leave children alone—Children should not be left alone or unattended in the area
where an appliance is in use. They should never be allowed to sit or stand on any part of
the appliance.
• DO NOT TOUCH INTERIOR OVEN ELEMENTS OR INTERIOR SURFACES OF THE WALL
OVEN UNTIL THEY HAVE COOLED. The oven heating elements may be hot even though the
elements are dark in color. Areas near the elements may become hot enough to cause burns.
During and after use, do not touch, or let clothing or other flammable materials touch these
areas until they have had sufficient time to cool. Among these areas are the oven vent
openings, the surfaces near these openings, oven door and window.
• Wear Proper Apparel—Loose-fitting or hanging garments should never be worn while using the
appliance. Do not let clothing or other flammable materials contact hot surfaces.
Never use your appliance for warming or heating the room.
• Do Not Use Water or Flour on Grease Fires—Smother the fire with a pan lid, or use baking
soda, a dry chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become
too hot.
• Use Only Dry Pot holders—Moist or damp pot holders on hot surfaces may result in burns
from steam. Do not let the pot holders touch the hot heating elements. Do not use a towel or
other bulky cloth instead of a pot holder.
• Do Not Heat Unopened Food Containers—Build-up of pressure may cause the container to
burst and result in injury.
IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN
• Use Care When Opening an Oven Door—Stand to the side of the appliance when opening the
door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.
• Keep Oven Vent Ducts Unobstructed. The wall oven is vented at the upper control panel or at
the center trim depending of the model. Touching the surfaces in this area when the wall oven
is operating may cause severe burns. Also, do not place plastic or heat-sensitive items near
the oven vent. These items could melt or ignite.
• Placement of Oven Racks. Always place oven racks in desired location while oven is cool.
Remove all utensils from the rack before removing rack. If rack must be moved while oven is
hot, use extreme caution. Use pot holders and grasp the rack with both hands to reposition.
Do not let pot holders contact the hot oven element or interior of the oven.
• Do not use the broiler pan without its insert. The broiler pan and grid allow dripping fat to
drain and be kept away from the high heat of the broiler.
5
6 Safety
IMPORTANT SAFETY INSTRUCTIONS
• Do not cover the broiler grid or oven bottom with aluminum foil. Exposed fat and grease
could ignite.
• Do not touch a hot oven light bulb with a damp cloth. Doing so could cause the bulb to
break. Disconnect the appliance or shut off the power to the appliance before removing and
replacing the bulb.
IMPORTANT INSTRUCTIONS FOR CLEANING YOUR
OVEN
• Clean the appliance regularly to keep all parts free of grease that could catch fire. Exhaust
fan ventilation hoods and grease filters should be kept clean. Do not allow grease to
accumulate. Greasy deposits in the fan could catch fire. Refer to the hood manufacturer's
instructions for cleaning.
SELF CLEANING OVENS
• Clean in the self-cleaning cycle only the parts of the appliance listed in this Owner's Guide.
Before using the self-cleaning cycle of the appliance, remove the broiler pan, oven racks and
any utensils stored in the appliance. Also the side rails of the oven racks must be removed for
the self-clean function to operate.
• Do not clean the oven door gasket. The door gasket is essential for a good seal. Care should
be taken not to rub, damage or move the gasket.
• Do not use oven cleaners. No oven cleaner or oven liner protective coating of any kind should
be used in or around any part of the appliance
The health of some birds is extremely sensitive to the fumes given off during
the self-clean cycle of any wall oven. Move birds to another well ventilated room.
IMPOR
TANT SAFETY NO
TICE
IMPORT
NOTICE
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of
California to publish a list of substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires businesses to warn customers of
potential exposure to such substances.
NO
TE
NOTE
Save these important safety instructions for future reference.
Feature Overview
YOUR WALL OVEN
CONVECTION FAN
OVEN VENT
CONTROL PANEL
OVEN DOOR LATCH
BROILING ELEMENT
OVEN RACK SLIDERS
OVEN RACK SUPPORT
OVEN RACKS
OVEN LIGHT
HIDDEN BAKE
ELEMENT COVER
GLASS OVEN DOOR
DOOR HANDLE
BROILER PAN COVER
BROILER PAN
7
8 Getting Started
BEFORE SETTING OVEN CONTROLS
Oven Vent Location
Installing Oven Rack Supports
The oven is vented under
upper control panel.
When the oven is on, warm
air is released through the
vent. This venting is
necessary for proper air
circulation in the oven and
good baking results.
ALWAYS INSTALL OVEN RACK
SUPPORT BEFORE TURNING ON
THE OVEN (WHEN THE OVEN IS
COOL).
To install oven rack support, insert
the support tabs in the holes located
on the oven inside side as shown
below. To remove the oven rack
support for a self-clean cycle, pull up
the support to disengage the tabs
from the oven. If the rack supports are
not removed, the self-clean cycle
won’t start. Always remove the left
side support first.
Oven Vent
Warm Air
Removing and Replacing Oven
Racks ALWAYS ARRANGE OVEN
RACKS WHEN THE OVEN IS COOL
(PRIOR TO OPERATING THE OVEN).
Always use oven mitts when using the
oven.
To remove an oven rack, pull the rack
forward. Lift up the rack off the oven rack
slider. To replace an oven rack, place
the rack on the slider and fit the sliders
pin into the pinhole located at the 2 front
corner of the rack.
Installed on
sliders
To remove
from sliders
To place on
sliders
Pull oven rack forward and lift it
up of the oven rack slider.
Arranging Oven Racks ALWAYS ARRANGE OVEN
Rack positions
7
5
3
1
6
RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING
THE OVEN).
To bake on a single rack, place the rack in position 3. To bake
on 2 racks, place the racks in position 2 and 7. To bake on 3 racks,
place the racks in position 1, 3 and 7.
4
2
RECOMMENDED RACK POSITIONS FOR BROILING, BAKING
& ROASTING
Food
Rack Position
Broiling meats, chicken or fish
6 or 7
Cookies, cakes, pies & muffins
5 or 6
Frozen pies, angel food cake, yeast, bread,
casseroles, small cuts of meat or poultry
2
Turkey, roast or ham
1
Note: Always use caution when removing food.
Setting Oven Controls
9
CONTROL PAD FUNCTIONS
Read the instructions carefully before using the oven. For satisfactory use of your oven,
become familiar with the various functions of the oven as described below. Note: The
graphics on your timer may look like one of those shown. Both are operating the same way.
Roast
Bake Convection PadConvection
Used to select the
Pad- Used to
convection baking mode.
select the
convection
roasting mode.
Bake Pad- Used to Broil Pad- Used
to select the
enter the normal
variable broil
baking mode
mode.
temperature.
0 Thru 9 number
pads- Used to
enter temperature
and times.
Preheat PadUsed to select
the preheat
mode.
Lock Pad- Used
to disable all
oven function.
Start- Used to start
all oven functions.
Not used with Oven
Light.
Clean Pad- Used
to select the selfcleaning mode.
Oven Light- Used Clock Pad- Used Kitchen Timer ON/OFF
to turn the oven
to set the time of Pad- Used to set or
light on and off.
cancel the minute timer.
day.
The minute timer does
not start or stop cooking.
Cancel- Used to
cancel any function
previously entered
except the time of day
and minute timer.
Push Cancel pad to
stop cooking.
Start Time Pad- Used to set
the desired start time for
baking or cleaning. Can be
used with BAKE or CLEAN
cycles to program a delayed
bake cycle.
Cook Time PadUsed to enter the
length of the cooking
time.
Cancel pad
10 Setting Oven Controls
SETTING THE CLOCK
The
or
pad is used to set the clock. The clock may be set for 12 or 24 hour time of
day operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
timer in the display will flash with "PF" (power failure, See Figure 1). Note: The clock
cannot be set when the oven is on.
When PF appears in the display, press
or
. No sound will be heard, but after 10
seconds a beep will sounds and PF will disappear.
To set the clock (example below for 1:30):
1. Press
2. Press
or
. "CLO" will appear in the display (Figure 2).
pads to set the time of day to 1:30 (Figure 3). "CLO" will
appear in the display. Press
Setting Oven Controls
11
SETTING CONTINUOUS BAKE OR 12 HOUR ENERGY SAVING
The
or
and
or
pads control the Continuous Bake or 12 Hour Energy
Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature
that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes.
The oven can be programmed to override this feature for Continuous Baking.
To set the control for Continuous Bake or 12 Hour Energy Saving
1. Press and hold
or
for 8 seconds (Figure1). "12Hr" or "- -Hr" will appear
in the display and the control will beep once.
or
2. Press
Figure 1
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12Hr" in the display indicates the control is
set for the 12 Hour Energy Saving mode and "- -Hr" indicates the control is set
for the Continuous Bake feature (Figures 2 and 3).
3. Press
or
Figure 2
to accept the change (Figure 4; display will return to time of
day) or press
or
to reject the change.
Figure 3
Figure 4
SETTING THE KITCHEN TIMER
The
or
pad controls the Timer feature. The Timer serves as an extra timer in the
kitchen that will beep when the set time has run out. It does not start or stop cooking. The
Timer feature can be used during any of the other oven control functions.
To set the Timer (example for 5 minutes):
1. Press
or
. "0:00" will appear in the display (Figure 5).
2. Press the number pads to set the desired time in the display (example
Press
or
Note: If
).
Figure 5
. The time will begin to count down with "5:00" (Figure 6).
or
is not pressed the timer will return to the time of day.
3. When the set time has run out, "End" will show in the display (Figure 7). The
clock will sound with 3 beeps every 15 seconds until
or
Figure 6
is pressed.
To cancel the Timer before the set time has run out:
Press
or
. The display will return to the time of day.
Figure 7
12 Setting Oven Controls
SETTING OVEN LOCKOUT FEATURE
The
or
pad controls the Oven Lockout feature. The Oven Lockout feature
automatically locks the oven door and prevents the Warmer Drawer from being turned on.
It does not disable the clock, Timer, electric and gas surface burners, Warmer Zone or
the interior oven lights.
To activate the Oven Lockout feature:
1. Press and hold
or
for 3 seconds (Figure 1).
2. After 3 seconds a beep will sound and "DOOR LOCKED" will flash on the
control panel. Once the oven door is locked the "DOOR LOCKED" indicator will
stop flashing and remain on.
Figure 1
To reactivate normal oven operation:
1. Press and hold
or
for 3 seconds. A beep will sound. The "DOOR
LOCKED" will continue to flash until the oven door has completely unlocked
(See Figure 1).
2. The range is again fully operational.
SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:
The
or
and
or
pads control the Fahrenheit or Celsius temperature display
modes. The oven control can be programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to
Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius. Press
Figure 2
Figure 3
or
(figure 2)
and hold for 7 seconds; "550°" will appear in the display and a beep will sound.
If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 3).
If "C" appears, the display is set to show temperatures in Celsius (Figure 4).
2. Press
or
to switch between Fahrenheit or Celsius display modes. The
display will show either "F" (Figure 3) or "C" (Figure 4).
3. Press
change.
Figure 4
or
to accept the change or Press
or
to reject the
Setting Oven Controls
13
SETTING SILENT CONTROL OPERATION
The
or
and
or
pads control the Silent Control operation feature. The Silent
Control operation feature allows the oven control to be operated without sounds or beeps
whenever necessary. If desired the control can be programmed for silent operation and later
returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control
operation:
1. To tell if your range is set for normal or silent operation press and hold
or
Figure 1
for 7 seconds. "0:00" will appear in the display (Figure 1).
2. Press
or
to switch between normal sound operation and silent
operation mode. The display will show either ":SP" (Figure 2) or ":--" (Figure 3).
Figure 2
If ":SP" appears (Figure 2), the control will operate with normal sounds and
beeps. If ":- -" appears (Figure 3), the control is in the silent operation mode.
3. Press
or
to accept the change or press
or
to reject the change.
Figure 3
ADJUSTING OVEN TEMPERATURE
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is needed.
To adjust the oven temperature:
1. Press
or
for 8 seconds (Figure 4).
Figure 4
2. To increase the temperature use the number pads to enter the desired change.
(Example 30°F)
(Figure 5). The temperature may be increased as
much as 35°F (17°C). To decrease the temperature use the number pads to
enter the desired change. (Example -30°F)
and then Press
Figure 5
or
(Figure 6). The temperature may be decreased as much as 35°F (17°C).
3. Press
or
to accept the temperature change and the display will return to
the time of day (Figure 7). Press
or
Figure 6
to reject the change if necessary.
Figure 7
14 Cooking Instructions
PREHEATING
The
or
pad controls the Preheat feature. The Preheat feature will bring the oven up
to temperature and then indicate when to place the food in the oven. Use this feature in
combination with the Bake pad when recipes call for preheating. Preheating is not
necessary when roasting or cooking casseroles. The oven can be programmed to preheat at
any temperature between 170°F to 550°F.
To set the Preheat temperature for 350°F:
1. Arrange the interior oven racks.
2. Press
Figure 1
or
3. Press
,
4. Press
or
. "- - - °" will appear in the display (Figure 1).
,
. "350°" will appear in the display (Figure 2).
. "PRE" will appear in the display as the oven heats and
reaches 350°F (Figure 3).
Figure 2
Figure 3
Note: After the oven has reached the desired temperature (this example, 350°F) the
control will beep and the "PRE" light will turn off and oven temperature will be
displayed (Figure 4). If the beep was missed, a quick glance at the display with
oven temperature showing in the oven display is a good way to check that the oven
has already reached the preheat temperature. Once the oven has preheated,
PLACE FOOD IN THE OVEN.
Press
or
when baking is complete or to cancel the preheat feature.
Figure 4
To change Preheat temperature while oven is preheating
(example changing from 350 to 425°F):
Figure 5
If it is necessary to change the preheat temperature while the oven is preheating to
the original temperature:
1. While preheating, press
Figure 6
or
,
,
. "425°" will appear in
. "PRE" will appear in the display as the oven heats and to
425°F (Figure 7). A beep will sound once the oven temperature reaches 425°F
and the display will show "425°" (Figure 8).
4. When baking is complete press
Figure 8
. "- - -°" will appear in the display (Figure 5).
2. Enter the new preheat temperature. Press
the display (Figure 6).
3. Press
Figure 7
or
or
.
Cooking Instructions
15
BAKING
The
or
pad controls normal baking. If preheating is necessary, refer to the Preheat
Feature for instructions. The oven can be programmed to bake at any temperature from 170°
F to 550° F (The sample shown below is for 350°F).
To set the Bake Temperature to 350°F:
1. Arrange interior oven racks and place food in oven.
2. Press
or
3. Press
,
4. Press
or
, "- - - °" will appear in the display (Figure 1).
,
(Figure 2). "350°" will appear in the display.
Figure 1
. A beep will sound once the oven temperature reaches 350°
F and the display will show "350°" (Figure 3).
Pressing
or
will cancel the Bake feature at any time.
Figure 2
To change the Bake Temperature (example changing from 350° to 425°F):
1. After the oven has already been set to bake at 350°F and the oven temperature
needs to be changed to 425°F, press
or
Figure 3
(Figure 4) and "- - - ° " will
show in the display.
2. Press
,
3. Press
or
,
(Figure 5). "425°" will appear in the display.
Figure 4
. "425°" will appear in the display (Figure 6).
Note: If the oven was recently heated from prior cooking and has remaining
heat, the bake element symbol may not show in the display immediately.
Figure 5
Figure 6
Air Circulation in the Oven
For good air circulation in the oven and best baking results, center pans as much as possible.
Allow 5.1 to 10.2cm (2” to 4”) around the utensil(s) for proper air circulation and be sure pans do
not touch each other, the door, sides or back of oven. The hot air must circulate around the pans
in the oven for even heat to reach all parts of the oven.
If using multiple pans, stagger as shown.
If using one pan, place in center of oven.
16 Cooking Instructions
Baking Problems
For best cooking results heat the oven when baking cookies, breads, cakes, pies or pastries,
etc... There is no need to preheat the oven for roasting meats or baking casseroles. The
cooking times and temperatures needed to bake a product may vary slightly from your previous
appliance.
Baking Problems and Solutions Chart
BakingProblems
Causes
Solutions
Cookies and biscuits
burn on the bottom.
•
Cookies and biscuits put into the
oven before the preheating time is
completed.
Oven rack overcrowded or rack
position too low.
Dark pan absorbs heat too fast.
•
Allow oven to preheat to the selected temperature before
placing food in oven.
•
Choose pan sizes that will permit 5.1 cm to 10.2 cm (2” to
4”) of air space on all sides when placed in the oven.
Use a medium-weight aluminum baking sheet.
•
•
•
Cakes put into the oven before
preheating time is completed.
Rack position too high or low.
Oven too hot.
•
•
•
Oven too hot.
Incorrect pan size.
Pan not centered in oven.
•
•
•
Set oven temperature 25°F/12°C lower than recommended.
Use pan size suggested in recipe.
Use proper rack position and place pan so there is 5.1 cm
to 10.2 cm (2” to 4”) of space on all sides of pan.
•
Range not level.
•
•
•
•
Pan too close to oven wall or rack
overcrowded.
Pan warped.
Place a marked glass measuring cup filled with water on
the center of the oven rack. If the water level is uneven, refer to the installation instructions for leveling the range.
Be sure to allow 5.1 cm to 10.2 cm (2” to 4”) of clearance on
all sides of each pan in the oven.
Do not use pans that are dented or warped.
•
Oven too cool.
•
•
Oven overcrowded.
•
•
Oven door opened too frequently.
•
•
•
Cakes too dark on
top or bottom.
Cakes not done in
the center.
•
•
•
•
Allow oven to preheat to the selected temperature before
placing food in the oven.
Use proper rack position for baking needs.
Set oven temperature 25°F/12°C lower than recommended.
Cakes not level.
Foods not done when
cooking time is up.
•
Set oven temperature 25°F/12°C higher than suggested
and bake for the recommended time.
Be sure to remove all pans from the oven except the ones
to be used for baking.
Open oven door only after shortest recommended baking
time.
Cooking Instructions
17
CONVECTION BAKING
The convection oven uses a fan located in the rear wall of the
oven to circulate heated air around the food to be cooked. The
controlled air flow pattern quickly seals the food surface
retaining the natural juices and flavour. This method of cooking
enables you to obtain the best culinary results when baking,
thawing, dehydrating and roasting foods.
Benefits of Convection Bake:
—Some foods cook up to 30% faster, saving time and
energy.
—Multiple rack baking.
—No special pans or bakeware needed.
Convection notes:
1. Batch cooking is more convenient with better results.
2. Defrosting is quicker in convection mode when compared
to regular radiant cooking.
3. Remember to use tested recipes with times adjusted for
convection baking/roasting when using the convection
mode. Times may be reduced by as much as 30% when
using the convection feature.
Foods for CONVECTION BAKE pad
*Decrease normal cook time by:
Frozen foods, pies, ................. 15-25 %
pastries and pizza
Refrigerator biscuits ............... 15-30 %
Rolls & Breads ........................ 20-25%
Fresh Pies/Pastries ................ 10-20 %
Begin with the maximum reduction in cook times and
adjust as needed.
*Recommended reduction in cook times based on
brands of food items tested. Cook times may vary with
your specific brand of food item.
Setting Convection Bake
The
or
pad controls the Convection Bake feature. Use the Convection Bake
feature when cooking speed is desired. The oven can be programmed for Convection baking
at any temperature between 300° F (149° C) to 550° F (288° C).
Convection baking uses a fan to circulate the oven's heat evenly and continuously within the
oven. This improved heat distribution allows for fast, even cooking and browning results. It
also gives better baking results when using 2 or 3 racks at the same time. Breads and
pastries brown more evenly. Most foods cooked in a standard oven will cook faster and
more evenly with Convection Bake.
General Convection Bake Instructions
1. When using Convection Bake, decrease your normal cooking times as shown aside.
Adjust the cook time for desired doneness as needed. Time reductions will vary
depending on the amount and type of food to be cooked. Biscuits should be baked on
pans with no sides or very low sides to allow heated air to circulate around the food.
Food baked on pans with a dark finish will cook faster.
2. Preheating is not necessary when cooking casseroles with Convection Bake.
3. When using Convection Bake with a single rack, place oven rack in position 2 or 3. If
cooking on multiple racks, place the oven racks in positions 2 and 7.
18 Cooking Instructions
To set the oven for Convection Bake and temperature to 350°F:
1. Arrange interior oven racks and place food in oven.
Figure 1
2. Press
3.
or
Press
4. Press
Figure 2
Figure 3
or
,
. "350°" will appear in the display (Figure 2).
. "PRE" and the fan icon will appear in the display (Figure 3)
until the oven reaches 350° F. A beep will sound once the oven temperature
reaches 350° F and the display will show "350°"and the fan icon (Figure 4).
Note: The convection fan will start AS SOON AS the oven is set for Convection
Bake. The oven icon will show a rotating fan within the square. This rotating fan icon
indicates when the Convection Fan is operating (See rotating fan in Figure 4).
Press
Figure 4
,
. "- - -°" will appear in the display (Figure 1).
or
to stop Convection Bake or cancel Convection Bake at any time.
Cooking Instructions
SETTING TIMED BAKE OR TIMED CONVECTION BAKE
The
(or
) or
(or
) and
(or
) pads control the Timed Bake feature. The
automatic timer of the Timed Bake feature will turn the oven OFF after cooking for the desired
amount of time you selected.
To program the oven to begin baking immediately and to shut off
automatically: (example below to BAKE at 350°F for 30 minutes):
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
3. Press
or
, "- - - °" will appear in the display (Figure 1).
4. Press
,
,
(Figure 2). "350°" will appear in the display. Min.
temperature is 170°F bake and 300°F for convection bake.
5. Press
or
."350°" will appear in the display (See Figure 3).
6. Press
or
. "0:00" and "350°" will appear in the display (Figure 4).
7. Enter the desired baking time by Pressing
,
. "30:00" and "350°" will
appear in the display (Figure 5). Note: Baking time can be set for any amount of
time between 1 minute to 11 hours and 59 minutes.
8. Press
or
. (Figure 6). Once the Timed Bake feature has started, the
current time of day will appear in the display.
Note: After the Timed Bake feature has activated, press
or
to display the
bake time remaining in the Timed Bake mode. Once Timed Bake has started
baking, a beep will sound when the oven temperature reaches the set temperature.
Press
19
20 Cooking Instructions
The
(or
) or
(or
),
(or
) and
(or
) pads control the Delayed
Time Bake feature. The automatic timer of the Delayed Time Bake will turn the oven on and
off at the time you select in advance. NOTE: If your clock is set for normal 12 hour display
mode the Delayed Time Bake feature can never be set to start more than 12 hours in
advance.
To program the oven for a delayed BAKE start time and to shut off
automatically (example for baking at 350°F, starting at 5:30 and baking
for 30 minutes):
1. Be sure that the clock is set with the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
3. Press
or
. "- - -°" will appear in the display (Figure 1).
4. Press
,
,
(Figure 2). "350°" will appear in the display.
5. Press
or
. "350°" will stay in the display. (Figure 3).
6. Press
or
. "0:00" and "350°" will appear in the display (Figure 4).
7. Enter the desired baking time using the number pads by Pressing
,
.
"30:00" and "350°" will appear in the display (Figure 5). Note: Baking time can
be set for any amount of time from 1 minute to 11 hours and 59 minutes.
8
Press
9. Press
or
. "350°" will show (Figure 6).
Cooking Instructions
BROILING
Broiling is a method of cooking tender cuts of meat by direct heat under the
broil element of the oven.
Preheating
Preheating is suggested when searing rare steaks. (Remove the broiler pan
before preheating. Foods will stick if placed on hot metal.) To preheat, set the
control(s) to BROIL as instructed in this manual. Wait for the element to
become red-hot, usually about 2 minutes. Preheating is not necessary when
broiling meats well-done.
To Broil
Broil one side until the food is browned; turn and cook on the second side.
Season and serve. Always pull the rack out to the "stop" position before turning
or removing food.
Broiling Tips
The broiler pan and it grid allow dripping grease to drain and be kept away from
the high heat of the broiler.
Broiling Times
Use the following table for approximate broiling times. Increase or decrease
broiling times, or move the broiling pan to a different rack position to suit for
doneness. If the food you are broiling is not listed in the table, follow the
instructions provided in your cookbook and watch the item closely.
Electric Range Broiling Table Recommendations
Food
Item
Steak 1" thick
Pork Chops 3/4" thick
Chicken - Bone In
Chicken - Boneless
Fish
Shrimp
Hamburger 1" thick
Rack
Position
Temp
Setting
5 or 6
5 or 6
5 or 6
4
5 or 6
5 or 6
4
5 or 6
4
550° F
550° F
550° F
450° F
450° F
500° F
550° F
550° F
550° F
Cook Time
1st side
2nd side
6:00
7:00
8:00
20:00
8:00
13:00
5:00
9:00
10:00
4:00
5:00
6:00
10:00
6:00
n/a
n/a
7:00
8:00
Doneness
Rare
Medium
Well
Well
Well
Well
Well
Medium
Well
NO
TE
NOTE
DO NOT use the pan without its grid. DO NOT cover the grid with foil. The exposed grease could ignite.
Should an oven fire occur, close the oven door and turn off the oven. If the fire
continues, throw baking soda on the fire or use fire extinguisher. DO NOT put water or flour on
the fire. Flour may be explosive.
21
22 Cooking Instructions
Setting Broil
To set the oven to broil at the default setting (550°F):
1. Place the broiler pan insert on the broiler pan. Then place the food on the broiler
pan insert. DO NOT use the broiler pan without the insert. DO NOT cover the
broiler insert with foil. The exposed grease could ignite.
2. Arrange the interior oven rack and place the broiler pan on the rack. Be sure to
center the broiler pan directly under the broiler element. Make sure the oven
door is in the broil stop position (See Figure 1).
3. Press
or
. "550°" will appear (Figure 2).
4. If a lower broil temperature is desired (minimum broil temperature setting is
400°F), press the desired temperature before continuing to step 5.
5. Press
or
. The oven will begin to broil. "550°" will stay in the display
(Figure 3).
6. Broil on one side until food is browned; turn and cook on the second side.
Season and serve. Note: Always pull the rack out to the stop position before
turning or removing food.
7. To cancel broiling or if finished broiling press
or
(Figure 4).
Note: To change temperature after the oven has begun, cancelled the control and
reset it at the desired temperature following steps 3 to 5.
Broiler Clean-Up Tips:
To make cleaning easier, line the bottom of the broiler pan with aluminum foil.
DO NOT cover the broiler grid with foil.
To prevent grease from baking on, remove the broiler pan from the oven as soon
as cooking is completed. Use hot pads because the broiler pan is extremely
hot. Pour off grease. Soak the pan in HOT, soapy water.
Clean the broiler pan as soon as possible after each use. If necessary, use
soap-filled steel wool pads. Heavy scouring may scratch the grid.
Cooking Instructions
23
CONVECTION ROASTING
When convection roasting, use the broiler pan and grid, and the roasting rack. The broiler pan
will catch grease spills and the grid will help prevent spatters. The roasting rack will hold the
meat.
To prevent food from contacting the broil element and to prevent grease
spattering, DO NOT use the roasting rack when broiling.
1. Place oven rack on next-bottom rack position.
2. Place the grid in the broiler pan. The roasting rack fits on the grid allowing the
heated air circulate under the food for even cooking and helps to increase
browning on the underside. Make sure the roasting rack is securely seated
on the grid in the broiler pan. DO NOT use the broiler pan without the grid or
cover the grid with aluminum foil.
3. Position food (fat side up) on the roasting rack.
4. Place the broiler pan on the oven rack. Note: Always pull the rack out to the
stop position before removing food.
Roasting
Rack
Grid
Broiler
Pan
NOTE: For best convection roasting results, always use the broiler pan, grid and
roasting rack.
Setting Convection Roast
The
or
pad controls the Convection Roast feature. The oven can be programmed
to Convection Roast at any temperature between 300°F (149°C) to 550°F (288°C) (The
example below is for 350°F).
To Set the Convection Roast and temperature to 350°F:
1. Arrange interior oven racks and place food in oven.
2. Press
or
. "---°" will appear in the display ( Figure 1).
Figure 1
3. Press
,
4. Press
or
,
. "350°" will appear in the display (Figure 2).
. "350°" will remain on and the convection fan icon will show in
the display (Figure 3).
5. Press
or
Figure 2
to stop Convection Roasting or cancel convection roast at any
time.
Figure 3
24 Care & Cleaning
USING THE SELF-CLEAN FEATURE
Adhere to the Following Cleaning
Precautions:
Do Hand
Clean
Frame
Do NOT
Hand Clean
Door Gasket
• Allow the oven to cool before cleaning.
• Wear rubber gloves when cleaning any exterior parts of the
oven manually.
During the self-cleaning cycle, the outside of the wall oven can
become very hot to the touch. DO NOT leave a small children
unattended near the appliance.
Before cleaning any part of the oven, be sure the oven is turned
off or else push CANCEL pad. Wait until the oven is cool.
Do Hand Clean Door Area
which out of the Door Gasket
The health of some birds is extremely sensitive
to the fumes given off during the self-clean cycle of any wall oven.
Move birds to another well ventilated room.
DO NOT use commercial oven cleaners or oven protective coatings in or around any part of the
self-cleaning oven. DO NOT clean the oven door gasket. The gasket on the oven door is essential
for a good seal. Care should be taken not to rub, damage or move the gasket. DO NOT use any
cleaning materials on the gasket. Doing so could damage it. DO NOT use aluminum foil to line
the oven bottom. This may affect cooking or foil could melt and damage the oven surface.
A self-cleaning oven cleans itself with high temperatures (well above cooking temperatures)
which eliminate soil completely or reduce it to a fine powdered ash you can whisk away with
damp cloth.
Preparing the Oven for Self-Cleaning
1. Remove any excess spillovers in the oven cavity before starting the self-cleaning cycle. To
clean, use hot soapy water and a cloth. Large spillovers can cause smoke or a fire when
subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content
(such as tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may
leave a dull spot even after cleaning.
2. Clean any soil from the oven frame and the door liner (see illustration). These areas heat
sufficiently during a self-clean to burn soil on. Clean with hot soapy water.
3. Remove the broiler pan and insert, all utensils and any foil. These items can not withstand
high cleaning temperatures.
4. Oven racks and oven rack supports must be removed. If they are not removed the self-cleaning
cycle can not start and RR will appears in the display indicating that you must remove the
racks and racks supports. When the cycle has finished and the door can be opened replace
the oven the oven rack supports and oven racks.
Care & Cleaning
The
or
pad controls the Self-Cleaning feature. If you are planning to use the oven
directly after a self-clean cycle remember to allow time for the oven to cool down and the
oven door to unlock. This normally takes about one hour. So to self-clean for 3 hours will
actually take about 4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average
soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).
During the self-cleaning cycle, the outside of the range can become very hot
to the touch. DO NOT leave small children unattended near the appliance; they may be
burned if they touch the hot oven door surfaces.
To set the controls for a 3 hour Self-Cleaning cycle to start
immediately and shut off automatically:
1. Be sure the clock is set with the correct time of day and the oven door is
closed.
2. Press
or
. "CLn" will flash and "3:00" HR will show in the display
(Figure 1). The control will automatically clean for a 3 hour period (default selfcleaning cycle time). Note: If a 2 or 4 hour clean time is desired, press
for 2
hour or press
for a 4 hour clean time. Set the cleaning time based on the
amount of soil; light, medium or heavy (* See above).
3. Press
or
. The "DOOR LOCKED" icon will flash; and the letters "CLn"
will remain on in the display (Figure 2).
4. As soon as the control is set, the motor driven oven door lock will begin to
close automatically. Once the door has been locked the "DOOR LOCKED"
indicator light will stop flashing and remain on. Also, the oven icon will appear in
the display (Figure 3).
Note: Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed:
1. The time of day and "DOOR LOCKED" will remain on (Figure 4).
2. Once the oven has cooled down for 1 HOUR, and the "DOOR LOCKED" icon is
no longer displayed, the oven door can then be opened (Figure 5).
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive
smoke or fire in the oven:
1. Press
or
.
2. Once the oven has cooled down for approximately 1 HOUR and the "DOOR
LOCKED" icon is no longer displayed,the oven door can then be opened (Figure 5).
25
26 Care & Cleaning
TO START THE DELAYED SELF-CLEAN CYCLE
The
or
and
or
pads and length of clean cycle, controls the Delayed Self-
Clean operation. The automatic timer will turn the oven on and off at the time you select in
advance. Be sure to review TO START THE SELF-CLEAN CYCLE for recommended clean
times. NOTE: If your clock is set for normal 12 hour display mode the Delayed Time SelClean feature can never be set to start more than 12 hours in advance.
To set the control for the Self-Cleaning Cycle to start at a delayed
time and shut off automatically: (example 3 hour self-clean cycle to
start at 4:30):
1. Be sure the clock is set with the correct time of day and the oven door is
closed.
2. Press
or
. "CLn" and "3:00" HR will show in the display (Figure 1).
The control will automatically clean for a 3 hour period (default self-cleaning
Care & Cleaning
27
GENERAL CLEANING
Cleaning Various Parts of Your appliance
Before cleaning any part of the appliance, be sure all controls are turned OFF and the appliance
is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE.
REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER
Surfaces
How to Clean
Glass, Painted and Plastic Body
Parts and Decorative Trim
For general cleaning, use hot, soapy water and a cloth. For more difficult soils and builtup grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60
minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of
these materials; they can scratch.
Control Panel
Before cleaning the control panel, turn all controls to OFF. Lightly spray the control panel
with a liquid cleaner. Wipe with a soft cloth or paper towel. DO NOT use abrasive
cleaners or scouring pads. These can permanently damage the control panel surface.
Porcelain Enamel
Broiler Pan and Grid
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1
solution of clear water and ammonia. If necessary, cover difficult spots with an
ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp
cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean
cloth. Remove all cleaners or the porcelain may become damaged during future
heating.
Stainless Steel, Chrome
Decorative Trim, Oven Racks,
Oven Racks Support
Clean with hot, soapy water and a dishcloth. Rinse with clean water and a cloth. Cover
stubborn spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse.
Cleaners made especially for stainless steel are recommended. Be sure to rinse the
cleaners as bluish stains may occur during heating and cannot be removed.
Oven Racks
Oven racks and oven rack supports must be removed from the oven during the selfclean cycle for cleaning. If they are not removed, the self-clean cycle will not start. Clean
them as described above.
Oven Door
To clean oven door, wash with hot, soapy water and a clean cloth. DO NOT immerse
the door in water or clean the oven door gasket.
Oven Gasket
The oven gasket located on the front frame of the oven and visible when the door is
opened is essential for a good seal. Care should be taken not to rub, damage or
remove the gasket.
28 Care & Cleaning
CARE AND CLEANING OF STAINLESS STEEL
Special care and cleaning are required for maintaining the appearance of stainless parts.
Please refer to the table provided at the beginning of the General Care & Cleaning section
in this Use & Care Manual.
TO REMOVE AND REPLACE OVEN DOOR
1. Open the door to the fully opened position.
2. Pull up the lock located on each hinge support toward front of range. You may have to apply
a little upward pressure on the lock to pull it up.
3. Grasp the door by the sides, pull the bottom of the door up and toward you to disengage
the hinge supports.
Keep pulling the bottom of the door toward you while rotating the top of the door toward the
appliance to completely disengage the hinge levers.
4. Proceed in reverse to re-install the door. Make sure the hinge supports are fully engaged
before unlocking the hinge levers.
Removal of the Oven Door
Lock in normal
position
Lock engaged
for door removal
HINGE SLOT - Door removed
from the appliance
SPECIAL DOOR CARE INSTRUCTIONS
Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass may weaken its structure causing an
increased risk of breakage at a later time.
Care & Cleaning
29
30 Solutions to Common Problems
IMPOR
TANT
IMPORT
Before calling for service, review this list. It may save you both time and expense. This
list includes common experiences that are not the result of defective workmanship or
material in your cooktop.
OVEN CONTROL BEEPS AND DISPLAYS F1 THROUGH F10
• Electronic control has detected a fault condition. Push CANCEL pad to clear the
display and stop the display from beeping. Reprogram the oven. If a fault reoccurs,
record the fault number, push the CANCEL pad and contact an authorized servicer.
F8 IS DISPLAYED
• The door was left open and controls set for self-cleaning cycle. Close the door and
push both upper and lower oven CANCEL pads.
INSTALLATION
• Place oven rack in center of oven. Place a level on the oven rack. Contact installing
agent if rack and cabinet cutout flooring are not level.
• Kitchen cabinet misalignment may make oven appear to be not level. Be sure cabinets
are square and level. Contact cabinet maker to correct problem.
ENTIRE OVEN DOES NOT OPERATE
• When the oven is first plugged in, or when the power supply to the oven has been
interrupted, the display will flash. The oven cannot be programmed until the clock is
set.
• Be sure electrical cord is securely connected into the electrical junction box.
• Cord/plug is not installed and/or connected. Cord is not supplied with oven. Contact
your dealer, installing agent or authorized servicer.
• Service wiring not complete. Contact your dealer, installing agent or authorized
servicer.
• Power outage. Check house lights to be sure. Call your local electric company.
• Short in cord/plug. Replace cord/plug.
Solutions to Common Problems
• Controls are not set properly. See instructions to set the controls.
• House fuse has blown or circuit breaker has tripped immediately following installation.
• House fuse may not be fully engaged. Check fuse and screw or engage circuit breaker
securely.
OVEN LIGHT DOES NOT WORK
• Burned-out or loose bulb. Follow the instructions under Oven Light to replace or
tighten the bulb.
SELF-CLEANING CYCLE DOES NOT WORK
• Make sure the oven door is closed.
• Controls not set properly. Follow instructions under “Using the Self-Clean Feature”.
• Self-cleaning cycle was interrupted. Stop time must be set 2-4 hours past the start
time. Follow steps under "To Stop or Interrupt a Self-Cleaning Cycle.
OVEN SMOKES EXCESSIVELY DURING BROILING
• Oven door is closed. Door should be open during broiling.
• Meat too close to the broiler element. Reposition the rack to provide more clearance
between the meat and the broiler. Preheat broil element for quick searing operation.
• Meat not properly prepared. Remove excess fat from meat. Cut remaining fatty edges
to prevent curling, but do not cut into the lean.
• Grid on broiler pan wrong side-up. Grease does not drain into broiler pan. Always place
the grid on the broiler pan with the ribs up and the slots down to allow grease to drip
into the pan.
• Broiler pan used without grid or grid cover with aluminum foil. DO NOT use the broiler
pan without the grid or cover the grid with aluminum foil.
• Oven needs to be cleaned. Grease has built up on oven surfaces. Regular cleaning is
necessary when broiling frequently. Grease or food spatters cause excessive smoking.
31
32 Solutions to Common Problems
SOIL NOT COMPLETELY REMOVED AFTER SELFCLEANING CYCLE IS COMPLETED
• Failure to clean bottom, from top of oven, frame of oven or door area outside oven seal.
These areas are not in the self-cleaning area, but get not enough to burn on residue.
Clean these areas before the self-cleaning cycle is started. Burned on residue can be
cleaned with a stiff nylon brush and water or a nylon scrubber. Be careful not to
damage the oven gasket.
• Excessive spillovers in oven. Set the self-clean cycle for longer cleaning time.
POOR BAKING RESULTS
• Many factors affect baking results. See Baking for hints, causes and corrections. See
Adjusting Oven Temperature.
FLAMES INSIDE OVEN OR SMOKE FROM VENT
• Excessive spillovers in oven. This is normal, especially for high oven temperatures, pie
spillovers or for large amounts of grease on bottom of oven. Wipe up excessive
spillovers.
Notes
33
34 Notes
Notes
35
36 Warranty Information
WALL OVEN WARRANTY
Your wall oven is protected by this warranty
In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated
Industries, Inc. We authorize no person to change or add to any of our obligations under this warranty. Our obligations
for service and parts under this warranty must be performed by us or an authorized Electrolux Home Products North
America servicer. In Canada, your appliance is warranted by Electrolux Canada Corp.
*NORMAL
RESPONSIBILITIES
OF THE
CONSUMER
EXCLUSIONS
IF YOU NEED
SERVICE
This warranty applies only to products in ordinary household use, and the
consumer is responsible for the items listed below:
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided
with the appliance and in accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of
blown fuses, repair of loose connections or defects in house wiring.
4. Expenses for making the appliance accessible for servicing, such as removal of trim,
cupboards, shelves,etc., which are not a part of the appliance when it was shipped from
the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).
This warranty does not cover the following:
1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND
INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY
IMPLIED WARRANTY.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential
damages, so this limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or
for appliances not in ordinary household use. The consumer shall pay for such service
calls.
3. Damages caused by services performed by servicers other than Electrolux Home Products
North America or its authorized servicers; use of parts other than genuine Electrolux
Home Products parts; obtained from persons other than such servicers; or external
causes such as abuse, misuse, inadequate power supply or acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be
readily determined.
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on
the bill establishes the warranty period should service be required. If service is performed,
it is in your best interest to obtain and keep all receipts. This written warranty gives you
specific legal rights. You may also have other rights that vary from state to state. Service
under this warranty must be obtained by contacting Electrolux Home Products:
USA
1•800•944•9044
Electrolux Home Products
North America
P.O. Box 212378
Augusta, GA 30917
Canada
1•866•294•9911
Electrolux Home Products
North America
802, boul. L’ange-Gardien
L’Assomption, Québec
J5W 1T6
This warranty only applies in the 50 states of the U.S.A.,
Puerto Rico, and Canada. Product features or
specifications as described or illustrated are subject to
change without notice. All warranties are made by
Electrolux Home Products North America, a division of
White Consolidated Industries, Inc. In Canada, your
appliance is warranted by Electrolux Canada Corp.
Download PDF

advertising