1
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for one year from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel
Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service center.
Channel Vision products are not intended for use in medical, lifesaving, life sustaining or critical environment applications. Channel Vision customers using or selling Channel Vision products for use in such applications do so at their own risk and agree to fully indemnify
Channel Vision for any damages resulting from such improper use or sale.
w w w . c h a n n e l v i s i o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax email: techsupport@channelvision.com
500-261 rev B
6026
Color IR Illuminated Camera
1 0
Model 6026
Hole
Ceiling/Wall
Side view
5.16”
5.59”
Front view
2
Coax extension
(not included)
Power
Video
(BNC connector)
2.20”
2.44”
2-Conductor power supply extension
(not included)
Crimp-on splice connectors
(not included)
To Monitor or
Video distribution
Power supply
(included)
Installation:
h Attach the camera mount to a wall or ceiling using the 3 screws provided.
h Drill a hole in the wall or ceiling for wiring (see diagram).
h If necessary, attach the camera’s video output to a coax extension that is long enough to reach your monitor or video distribution equipment.
h If necessary, cut the connector off of the end of the power supply and splice in an extension using crimp-on connectors.
Features:
1/3” High Resolution CCD
540 Lines Of Resolution
0 Lux Sensitivity
3.6mm Lens
Power Supply Included
3-Axis Concealed Cable Bracket
Waterproof (IP68)
Sun Shield Included
Specifications:
Image Sensor:
Camera Lens:
Resolution:
Effective Pixels:
S/N Ratio:
Min Illumination:
Power Supply:
Power Consumption:
Video Output:
White Balance:
Auto Electronic Shutter:
Scanning System:
Synchronous System:
Gamma Characteristic:
Waterproof criterion:
Dimensions:
Operating Temp:
1/3” High Resolution CCD
3.6mm
540 lines
768 x 494
More than 48 dB
0.02 LUX @ F1.2 (Before IR is activated)
12VDC regulated
315 mA (total)
Camera: 95mA, LEDs: 220mA
1 Vp-p @ 75 ohms
Automatic
1/60s~1/100,000s
Interlaced 2:1
Internal, Negative Sync.
0.45
IP 68
2.44”Dia. x 5.16”L (without sunshield)
-10°C to 50°C (14°F to 122°F)
Specifications subject to change without notice.
3
