Electrolux 5041 Dishwasher User Manual

152976 17/1
15-09-2001
9:10
Pagina 1
FAVORIT 5041
Dishwasher
Operating instructions
152976 17/1
15-09-2001
9:10
Pagina 2
Dear Customer
Please read these user instructions carefully.
Above all please observe the safety instructions on the first few pages of
these user instructions! Please keep these user instructions for later reference.
Pass them on to any subsequent owner of the appliance.
The warning triangle and/or specific words (Warning!, Caution!, Important!)
are used to highlight instructions that are important for your safety or for the
function of the appliance. It is imperative that these instructions are
observed.
The numbered instruction steps lead you step by step through the operation
of the appliance.
Next to this symbol you receive additional information and practical tips on
using the appliance.
Tips and instructions for the economical and environmentally friendly use of
the appliance are marked with a clover leaf.
In the event of a malfunction, these operating instructions contain
information on how to rectify faults yourself, see "What to do, if..." section.
For further assistance contact your local AEG Service Force Centre, see the
chapter "Service & Spare Parts".
2
Printed on paper manufactured with environmentally sound processes.
He who thinks ecologically acts accordingly...
152976 17/1
15-09-2001
9:10
Pagina 3
Contents
Safety instructions
4
Disposing of packaging and old machines
Disposing of the packaging
Disposing of your old machine
Economical and ecological dishwashing
6
6
6
6
Description of the appliance
The inside of the appliance
Control panel
7
7
7
Before use
Before using your dishwasher for the first time
Setting the water hardness range
Filling with special salt
The rinse aid
8
8
8
9
10
Loading cutlery and dishes
The cutlery basket
The lower basket
The upper basket
Adjusting the height of the upper basket
Use of detergent
Bio programmes and compact powders
12
13
13
14
15
16
17
Washing programmes
18
Operating instructions
20
Maintenance and cleaning
Internal and external cleaning
Cleaning the filters
22
22
22
What do do, if...
24
Service & Spare Parts
26
Guarantee Conditions
27
European Guarantee
28
Hints for test centres
29
Technical data
30
Installation and connection instructions
Fitting under a counter
Levelling
Connecting to the water supply
Water outlet connection
Protection against flooding
Electrical connection
31
31
31
32
32
33
34
3
152976 17/1
15-09-2001
9:10
Pagina 4
Safety instructions
The safety of AEG electrical appliances conforms to accepted rules of technology and
the Appliance Safety Act. We as manufacturers, however, see ourselves as being
obliged to familiarise you with the following safety instructions.
Using your dishwasher for its intended purpose
●
Only use your dishwasher for machine washing of household crockery. If your
machine is misused or used for any purposes other than that for which it is
intended, the manufacturer cannot be held liable for any damage caused.
●
For safety reasons, you should not convert or modify your dishwasher in any way.
Before using your dishwasher for the first time
●
Check your dishwasher for any transport damage. Never connect a damaged
machine. If your dishwasher is damaged, you should contact your supplier.
●
Your dishwasher must be correctly installed and connected. Please read the
section on "Installation" to make sure you know all about this.
●
Before using your dishwasher for the first time, do not forget that the nominal
voltage and current type indicated on the rating plate of your machine must be
the same as the nominal voltage and current type at the installation site. The
necessary electrical fusing is also given on the rating plate.
Child safety
4
●
Packaging parts (e.g. foils, styrene foam) may be dangerous for children, who
could be suffocated! You should therefore keep all packaging well away from
children.
●
Children may not recognise the dangers of improper use of electrical appliances.
You should therefore ensure proper supervision during operation and not allow
your children to play with your dishwasher.
●
Detergents may have a caustic effect on eyes, mouth and throat and may even
cause suffocation! Keep all detergents in a safe place out of children’s reach.
●
The water in your dishwasher should not be used for drinking. Detergent residues
may still be present in your machine. Keep children well away from your
dishwasher when its door is open.
152976 17/1
15-09-2001
9:10
Pagina 5
Your dishwasher in day-to-day use
●
Never operate your dishwasher if the electrical supply lead, inlet hose or drain
hose, control panel, worktop or plinth are damaged.
●
If there is a fault, first turn the water tap off. Then switch off your machine and
pull the plug out of the socket. If there is a fixed connection, switch off or
unscrew the fuse(s).
●
Never pull the plug out of the socket by the cable - always hold the plug.
●
Dishwasher repairs should only be performed by trained personnel.
Improper repairs may seriously endanger the user. If your dishwasher needs to be
repaired, you should contact your local AEG Service Force Centre or your retailer.
●
Never place any solvents in your dishwasher or you may cause an explosion!
●
Do not rest or sit on the open door as the machine could tilt.
●
Before using special dishwasher salt, detergent or rinse-aid, make sure that the
manufacturer of these products expressly specifies their use in domestic
dishwashers.
●
Always turn off the water tap when your dishwasher is left unattended for any
length of time, e.g. when you are away on holiday.
●
Only transport the dishwasher in an upright position. Tipping it upside down
during transport could cause salty water to leak into the internal compartment
and lead to the formation of rust.
5
152976 17/1
15-09-2001
9:10
Pagina 6
Disposing of packaging and old machines
Disposing of the packaging
Our dishwashers require effective protective packaging in transit, though we always
confine ourselves to what is absolutely necessary.
Warning! Packaging parts (e.g. foils, styrene foam) may be dangerous for
children and can cause suffocation. You should therefore keep all
packaging well away from children.
All packaging materials used are environmentally compatible and reusable.
The cardboard parts are produced from recycled paper, and the wood is untreated.
The plastics are marked as follows:
>PE< for polyethylene, e.g. packaging foils.
>PS< for polystyrene, e.g. padding (essentially CFC-Free).
>POM< for polyoxymethylene, e.g. plastic clamps.
Give the packaging for reuse to your local recycling centre. Your local Council will
give you its address.
Disposing of your old machine
When your machine finally reaches the end of its life and you withdraw it from
service, you should render it unserviceable before having it disposed of.
Warning! Children at play could lock themselves in your machine (and
suffocate) or otherwise endanger their lives. Therefore pull out the main
plug and detach and discard the electrical supply lead.
Disable the door lock so that the door no longer closes.
Marking of plastic parts for graded recycling: all plastic parts in your machine are
marked with internationally standardised abbreviations (e.g. <PS> for polystyrene).
When your machine is disposed of, this enables plastic waste to be sorted into
individual types for environmentally conscious recycling.
Check with your local Council or Environmental Health Office to see if there are
facilities in your area for recycling the appliance.
Economical and ecological dishwashing
●
Ensure that the water softener is correctly adjusted.
●
Do not pre-rinse under running water.
●
Select the wash programme to suit the nature and degree of the soiling on the
dishes.
Do not use more detergent, special salt or rinse aid than is recommended in these
operating instructions and by the manufacturer of the respective product.
●
6
152976 17/1
15-09-2001
9:10
Pagina 7
Description of the appliance
The inside of the appliance
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Water hardness adjustment
Levelling spacers
Upper basket stop
Salt container
Large filter
Detergent dispenser
Control panel
Rating plate
Rinse aid dispenser
Central filter
Lower spray arm
Upper spray arm
Upper basket
Worktop
14
1
2
3
13
12
11
4
10
5
6
9
8
7
IN68
Control panel
1. ON/OFF indicator light
4. Programme guide
2. ON/OFF push button
5. Door handle
3. BIO 50° push button
6. Programme selector dial
7
152976 17/1
15-09-2001
9:10
Pagina 8
Before use
Before using your dishwasher for the first time
1. Ensure that the electrical and water connections comply with the installation
instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour 1 litre of water inside the salt container and then fill with salt.
5. Fill the rinse-aid dispenser.
6. Run a "Rinse and Hold" programme.
Setting the water hardness range
The dishwasher is equipped with a water softener designed to remove minerals and
salts from the water supply, which would have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, German, French degrees and PPM
(parts per Million).
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener should be adjusted.
Water hardness
°dH
°TH
(german degrees) (french degrees)
PPM
Level
Use of salt
(parts per million)
0-4
0-8
0 - 80
0
NO
5 - 11
9 - 20
81 - 200
1
YES
12 - 22
21 - 40
201 - 400
2
YES
23 - 34
41 - 60
401 - 600
3
YES
35 - 45
61 - 80
601 - 800
4
YES
46 - 50
81 - 90
801 - 900
5
YES
If your water hardness is level 0 it is already soft and therefore there is
no need to use salt.
In this case adjust the water softener on level 1 without using salt.
8
152976 17/1
15-09-2001
9:10
Pagina 9
With a screwdriver turn the selector on the
upper front corner of the machine until the
level required corresponds with the marker.
3
4
To adjust the water softener
5
2
2
1
AA05
Filling with special salt
Caution! The packaging of dishwasher salt and detergents are often very similar. The
accidental filling of the salt compartment with detergent would ruin the water
softener. Each time you add salt, make sure the carton you have in your hand really
is salt.
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a dishwasher,
especially table salt, will damage the water softener.
Only fill with salt just before starting one of the washing programmes.
This will prevent any grains of salt or salty water, which may have been
spilled, remaining on the bottom of the machine for any period of
time, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of
the salt container.
LE
SA LT
SA LZ
SA L
SE
2. Pour 1 litre of water inside the container
(this is necessary only before filling with
salt for the first time).
3. Using the funnel provided, pour in the salt
until the container is full.
Do not worry if water overflows from the
unit when filling with salt, this is quite
normal.
SR14
4. Replace the cap making sure that there is
no trace of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
9
152976 17/1
15-09-2001
9:10
Pagina 10
When this has been done, all that is required is
to periodically top up the container with salt.
The salt cap has a refill indicator window in
the centre.
A green float is clearly visible when there is
salt inside the container and almost disappears
when the salt has finished reminding you to
add salt.
SR11
The rinse-aid
The rinse-aid ensures brilliant crockery and also helps it to dry. It is automatically
dosed in during the hot rinsing cycle. The storage compartment built in to the inside
of the door can hold about 110 ml of rinse-aid, which will be sufficient for between
16 and 40 dishwashing programmes, according to the dosage setting.
Filling up the rinse-aid
1. Open the container by turning the
lid (A) anticlockwise.
2. Add the rinse aid until the
container is completely full. The
indicator (B) will be completely
dark.
A
Ensure that the lid is closed after every refill.
BR01
Top up with rinse aid when the indicator (B)
becomes clear.
Clean up any rinse aid spilt during filling with
an absorbent cloth to avoid excess foaming
during the next wash.
B
10
m
a
BR03
x 6 5 4 3
2 1
Attention! Do not put liquid detergent in
the rinse aid compartment.
152976 17/1
15-09-2001
9:10
Pagina 11
Adjusting the dose
The correct dosage of the rinse-aid should be regulated on the basis of the shine and
drying results.
For this purpose, set the quantity of liquid by
means of the six-position selector (C) located
on the inside of the filler opening (minimum
quantity is position 1, maximum quantity is
position 6).
m
a
x
6 5 4 3
2 1
Use the tip of a screwdriver to rotate the
selector. If drops of water or white marks
remain on the crockery after it has been
washed, increase the dosage. If the crockery
comes out with whitish, sticky streaks, reduce
the dosage.
C
BR02
11
152976 17/1
15-09-2001
9:10
Pagina 12
Loading cutlery and dishes
Sponges, household cloths and any object that can absorb water must not
be washed in the dishwasher.
For washing in the dishwasher the following cutlery/dishes
are not suitable:
●
Cutlery with wooden, horn, china or
mother of pearl handles.
●
Plastic items that are not heat resistant.
●
Older cutlery with cement that is not
temperature resistant.
●
Bonded cutlery items or dishes.
●
Pewter or copper items.
●
Lead crystal glass.
●
Steel items subject to rusting.
●
Wooden platters.
●
Items made from synthetic fibres.
are of limited suitability:
●
Only wash stoneware in the dishwasher
if it is specifically marked as being
dishwasher-safe by the manufacturer.
●
Glazed patterns may fade if machine
washed frequently.
●
Silver and aluminium parts have a
tendency to discolour during washing.
Left-overs, e.g. egg white, egg yolk and
mustard often cause discolouring and
staining on silver. Therefore always
clean left-overs from silver immediately,
if it is not to be washed straight after
use.
●
Some types of glass can become dull
after a large number of washes.
Attention!
When buying new dishes, ensure that they are dishwasher safe.
Before placing dishes in the machine, remove any scraps of food, to avoid clogging
the filters and consequently reducing the performance.
Do not load very small items which can fall through the baskets.
Open the door and slide out the baskets.
12
152976 17/1
15-09-2001
9:10
Pagina 13
The cutlery basket
Long bladed knives stored in an upright position are a potential
hazard.
Long and/or sharp items of cutlery such as carving knives must be
positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as knives.
Cutlery should be placed in the removable
cutlery basket with the handles facing
downwards.
If the handles protrude from the bottom of
the basket, obstructing the lower spray arm,
load the cutlery with the handles facing
upwards.
Mix spoons with other cutlery to prevent them
from sticking together.
2
1
For best results we recommend to use the
cutlery grids provided (if the size and the
dimensions of the cutlery allow it).
UI80
The lower basket
The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the edge of the basket,
ensuring that the upper spray arm can turn freely.
UI59
UI13
13
152976 17/1
15-09-2001
9:10
Pagina 14
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates up to 25 cm in
diameter), salad bowls, cups and glasses; these
should be arranged as shown in the pictures.
Glasses with long stems can be placed upsidedown in the cup racks.
Arrange items on and underneath the cup
racks so that water can reach all surfaces.
Light items (plastic bowls etc.) should be
loaded in the upper basket and arranged so
they do not move.
US64
In case that plates are loaded in the
upper basket:
load them starting from the rear positions of
the basket; tilting them slightly forwards and
avoiding the front positions near the door.
US71
Before closing the door, ensure that the spray arms can rotate freely.
14
152976 17/1
15-09-2001
9:10
Pagina 15
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in diameter) you can load
them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the
upper basket outwards and slide the
basket out.
A
2. Refit the basket in the higher position
and replace the stops (A) in their
original position.
Attention!
When the top basket is in the higher
position it will only take plates up to
20 cm in diameter and you will not be
able to use the cup racks.
RC01
After loading your machine always close the door, as an open door can
be a hazard.
15
152976 17/1
15-09-2001
9:10
Pagina 16
Use of detergent
Attention!
Only use detergents specifically designed for use in dishwashers.
If using powder detergents proceed as follows:
1. Open the dispenser lid by pulling the
catch (D).
2. Add the detergent according to the
recommended quantity given in the
"Washing programmes" chart.
Min = 15 g
Max = 30 g D
3. Always close the lid.
M
M IN
AX
4. If the programme has a prewash add the
required detergent over the lid of the
dispenser. Follow the recommended
quantity of detergent given in the
"Washing programmes" chart.
DE17
If using detergent in tablets proceed as
follows:
1. For all programmes; place 1 tablet
inside the detergent dispenser.
2. Always close the lid.
3. For all programmes with prewash;
place a portion of a further tablet
on the lid of the detergent dispenser.
DE02
At the end of any washing programme the lid is always open, ready for the next
wash.
Attention!
Since not all detergents are the same, you should also consult the instructions
on the packet.
16
152976 17/1
15-09-2001
9:10
Pagina 17
Remember that insufficient quantities of detergent will produce poor
washing results whereas an excessive amount of detergent does not
improve washing results and is also wasteful.
Using no more than the correct amount of detergent also contributes
to reducing pollution.
BIO programmes and compact powders
On the basis of their chemical composition, dishwasher detergents can be classified
into two groups:
- conventional, alkaline detergents with caustic components:
- low-alkaline compact powders with natural enzymes.
The enzymes in low-alkaline compact powders have a dirt-dissolving effect and are
also biodegradable. These enzymes deploy their full dirt-dissolving power within a
temperature range of 40-50°C. In BIO washing programmes, the temperature range
and duration of the heating phases are precisely matched to the dirt-dissolving
properties of the enzymes.
In combination with low-alkaline compact powders, BIO washing programmes, at a
temperature as low as 50°C, therefore achieve the same cleaning results that would
otherwise be achievable only with 65°C programmes.
The lack of any caustic components in low-alkaline compact powders and the lower
cleaning temperature of BIO washing programmes are not only environmentally
friendly, but also care for your crockery.
17
152976 17/1
15-09-2001
9:10
Pagina 18
Washing programmes
Programmes
Type of soil
Type of load
Starting position Required
of the programme push buttons
selector
NORMAL 65°
WITH
PREWASH
Normal soil.
Crockery and cutlery
A
ON/OFF
NORMAL 65°
NO
PREWASH
Light soil.
Crockery and cutlery
B
ON/OFF
Normal soil.
Crockery and cutlery
A
BIO 50°
+
ON/OFF
Light soil.
Crockery and party
crockery
C
BIO 50°
+
ON/OFF
Partial load to be
completed later in the day.
This programme does not
require detergent.
D
ON/OFF
* BIO 50°
WITH
PREWASH
** QUICK
50°
RINSE AND
HOLD
** Testing programme for EN 50242 (see "Hints for Test Centres").
** This is a quick wash programme for a full load of lightly soiled dishes, glasses and
crockery (except pots) so that you may re-use them promptly. Due to the
shortness of this programme, no drying phase is provided.
18
152976 17/1
15-09-2001
9:10
Pagina 19
Recommended
quantity of
detergent
Approximate values *
Energy
Water
consumption consumption
in kWh
in litres
wash
prewash
Programme
duration in
minutes
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Active drying
25 g
5g
91 - 101
1,4
19
Main wash up to 65°C
1 cold rinse
1 hot rinse
Active drying
30 g
/
83 - 93
1,4
16
Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse
Active drying
25 g
5g
91 - 101
1,24
19
Main wash up to 50°C
1 cold rinse
1 hot rinse
30 g
/
33 - 43
1,1
16
/
/
8
0,1
10
Cycle description
1 cold rinse
(to avoid food scraps
from sticking to the
dishes).
* The times and consumption values are intended as a guide, and depend on the
pressure and temperature of the water and also by the variations of the power
supply.
19
152976 17/1
15-09-2001
9:10
Pagina 20
Operating instructions
1. Check the filters
Ensure they are clean and properly positioned (see "Maintenance and
cleaning").
2. Check that there is rinse aid and salt
3. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans, plates and
cutlery in it.
Pull the upper basket out and arrange the plates, saucers, glasses and
cups etc. in it.
Slide the baskets back into the machine.
4. Ensure that the spray arms can rotate freely.
5. Measure out detergent
Add the detergent into the dispenser according to the dosage quantity given in
the "Washing programmes" chart.
Close the detergent dispenser lid.
6. Close the dishwasher door
7. Set the programme
Turn programme selector dial clockwise until the programme marker on the
knob corresponds with the programme you wish to select on the control panel.
Select the temperature according to the instructions in the "Washing
programmes" chart (see "Required push buttons").
8. Start the programme
Open the water tap.
Depress the ON/OFF push button, the ON/OFF indicator light will come on and
the machine will start.
20
152976 17/1
15-09-2001
9:10
Pagina 21
9. At the end of the washing programme
The dishwasher will automatically stop.
The ON/OFF indicator light remains on until the ON/OFF push button is
depressed.
10. Switch off the dishwasher
Switch off the dishwasher by pressing the ON/OFF push button.
Wait 15/20 minutes before opening the dishwasher’s door; in this way you
will avoid burning yourself when removing the dishes and avoid also the
damage of the nearby furniture caused by the escape of steam.
Empty the lower basket first and then the upper one, this will avoid water
dripping from the upper basket onto the dishes in the lower one.
When the wash programme has finished, it is recommended that the
dishwasher is unplugged and the water tap turned off.
Interrupting a programme
●
A programme underway is interrupted when you open the door.
●
Close the door again. The programme will start again at the point it was
interrupted.
Caution!
In general it is not advisable to open the door while the machine is
working; if the door is opened however, a safety device ensures that the
machine stops.
Caution!
Opening the door could let very hot steam escape: you risk being
scalded! Open the door with great care.
Do not open the door during the hot phase: this may cause hot water to
escape.
21
152976 17/1
15-09-2001
9:10
Pagina 22
Maintenance and cleaning
Internal and external cleaning
Do not under any circumstances use furniture care products or aggressive
cleaners.
If necessary, clean the controls only with a soft cloth and clean warm water.
The spray arms do not need cleaning.
Occasionally check the internal containers, door seal and water inlet for soiling,
clean if necessary.
We recommend every 3 months to run a 65°C wash programme without dishes using
detergent.
Cleaning the filters
(after each wash)
Scraps of food may accumulate in the drain filter (A) and should be removed
by rinsing the filter under running water.
To remove the drain filter
-
simply pull it out by the handle
Once cleaned, refit the filter by pushing it back to its
original position until it engages.
A
MA04
MA19
22
152976 17/1
15-09-2001
9:10
Pagina 23
Cleaning the large filter
(every week)
If necessary clean the large filter (B) on the both sides under running water, using a
brush.
To remove the large filter
1. Remove the spray arm by pulling it
upwards on one side.
90°
B
C
2. Turn the column (C) anticlockwise by
90° and then slide out the filter.
MA05
3. Once cleaned refit it following the
above instructions in reverse order.
4. Ensure the filter is in its original
position, the handle of the drain filters
should be pointing towards the front
of the appliance.
MA20
MA21
MA18
Under no circumstances must the dishwasher be used without
filters.
23
152976 17/1
15-09-2001
9:10
Pagina 24
What to do, if...
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer.
Before contacting your local Service Force Centre, please carry out the checks listed
below.
Important: If you call out an engineer to a fault listed below or to repair a fault
caused by incorrect use or installation a charge will be made even if
the appliance is in guarantee.
Symptom
...the programme does not
start
...the machine does not fill
with water
...the machine will not
drain
...the machine is noisy
...the door is difficult to
close
Possible cause
Remedy
The door has not been
properly closed.
Close the door.
The plug is not properly
inserted in the power
socket.
Insert the plug.
There is a power failure.
Check the fuse.
The water tap is closed.
Open the water tap.
The mains water supply has
been cut off.
Wait for the supply to be
restored.
The inlet hose may be
squashed or bent.
Reposition the hose
correctly.
The inlet hose may be
blocked.
Switch off the water
supply and clean the
filter.
The drain hose may be
squashed or bent. The drain
hose extension is not
correct.
Reposition the drain hose
correctly. Follow the
instructions for
connecting to the waste.
The sink may be blocked.
Clear any blockages.
Dishes are rattling against
each other.
The spray arms are
knocking against the
dishes.
Load correctly crockery,
cutlery, pots and pans.
Refer to "Loading cutlery
and dishes"
The dishwasher is not level,
or not properly built-in.
Refer to "Installation"
instructions.
Once you have checked the possible causes listed above, switch on the dishwasher
and start a wash programme, if the fault persists contact the Service Force Centre.
24
152976 17/1
15-09-2001
9:10
Pagina 25
...the wash results are not satisfactory
Visible lime deposits or white film on the dishes
●
Check that the right level of the water softener is set.
●
Check that there is salt.
The dishes are not quite dry
●
The rinse aid has run out or too little is being used.
The dishes are not clean
●
The baskets are too full.
●
The dishes have not been arranged properly.
●
The spray arms do not rotate because of incorrect loading of the baskets.
●
The filters are clogged.
●
The filters are not in position.
●
Not enough detergent has been used or it is unsuitable.
●
The detergent is old or has gone hard.
●
The salt container cap is not properly closed.
●
The washing programme is too gentle.
25
152976 17/1
15-09-2001
9:10
Pagina 26
Service & Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare
parts, contact your local AEG Service Force Centre by telephoning
08705 929 929
Your call will be automatically routed to the Service Centre covering your post code
area.
Help us to help you
Please determine your type of enquiry before writing or telephoning.
When you contact us we need to know,
1
2
3
4
5
Your name, address and post code
Your telephone number
Clear and concise details of the fault code
Date of purchase
●
●
Mod.
E-NR (product number)
F-NR (serial number)
This information can be found on
the rating plate located on the right
inside edge of the door.
No.
Prod.
..
......
..
......
Ser.
No.
...
......
E- NR ...... F-NR ......
Customer Care
For general enquiries concerning your AEG appliance, or for further information on
AEG products, you are invited to contact our Customer Care Department by letter or
telephone at the address below or visit our website at www.aeghome.co.uk
Customer Care Department
AEG
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel.: 08705 350 350 (*)
26
* calls to this number may be recorded for training purposes
152976 17/1
15-09-2001
9:10
Pagina 27
Guarantee Conditions
AEG offer the following guarantee to the first purchaser of this appliance:
1. The guarantee is valid for 12 months commencing when the appliance is handed
over to the first retail purchaser, which must be verified by purchase invoice or
similar documentation.
The guarantee does not cover commercial use.
2. The guarantee covers all parts or components which fail due to faulty
workmanship or faulty material. The guarantee does not cover appliances where
defects or poor performance are due to misuse, accidental damage, neglect,
faulty installation, unauthorised modification or attempted repair, commercial
use or failure to observe requirements and recommendations set out in the
instruction book.
This guarantee does not cover such parts as light bulbs, removable glassware or
plastic.
3. Should guarantee repairs be necessary the purchaser must inform the nearest
customer service office (AEG’s service or authorised agent). AEG reserves the right
to stipulate the place of the repair (i. e. the customer’s home, place of installation
or AEG workshop).
4. The guarantee or free replacement includes both labour and materials.
5. Repairs carried out under guarantee do not extend the guarantee period for the
appliance. parts removed during guarantee repairs become the property of AEG.
6. The purchaser’s statutory rights are not affected by this guarantee.
27
152976 17/1
15-09-2001
9:10
Pagina 28
European Guarantee
If you should move to another country within Europe then your guarantee moves
with you to your new home subject to the following qualifications:
●
The guarantee starts from the date you first purchased your product.
●
The guarantee is for the same period and to the same extent for labour and parts
as exist in the new country of use for this brand or range of products.
●
This guarantee relates to you and cannot be transferred to another user.
●
Your new home is within the European Community (EC) or European Free Trade
Area.
●
The product is installed and used in accordance with our instructions and is only
used domestically, i. e. a normal household.
●
The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care Centre, listed below, to
give them details of your new home. They will then ensure that the local Service
Organisation is aware of your move and able to look after you and your appliances.
28
France
Senlis
+33 (0)3 44 62 29 29
Germany
Nürnberg
+49 (0)911 323 2600
Italy
Pordenone
+39 (0)1678 47053
Sweden
Stockholm
+46 (0)8 738 79 10
UK
Slough
+44 (0)1753 219899
Ireland
Dublin
+353 (0)14090753
152976 17/1
15-09-2001
9:10
Pagina 29
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container
and with rinse aid the rinse aid dispenser.
Test standard
EN 50242
Reference programme
- BIO 50° WITH PREWASH
Load
12 standard place settings
Rinse aid selector
position 5
Detergent dosage
- 25 g in the dispenser
- 5 g on the dispenser lid
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
29
152976 17/1
15-09-2001
9:10
Pagina 30
Technical data
Technical specifications
Dimensions
Width
Height with worktop
Height without worktop
Max depth
Max depth with open door
Electrical connection
Motor rating during wash
Power of heating element
Overall power
Water supply pressure
Capacity
60 cm
85 cm
82 cm
61 cm
115,2 cm
220/240 V - 50 Hz
200 W
2100 W
2300 W
Minimum
Maximum
50 kPa (0.5 bar)
800 kPa (8 bar)
12 place settings
This appliance complies with the following E.E.C. Directives:
- 73/23/CEE of 19/02/73 (Low Voltage Directive) and subsequent
modifications;
- 89/336/CEE of 03/05/89 (Electromagnetic Compatibility Directive) and
subsequent modifications.
30
152976 17/1
15-09-2001
9:10
Pagina 31
Installation and connection instructions
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can
install it under a close fitting sink unit or a
pre-existing top, providing the dimensions of
the recess correspond to those shown in the
picture.
Proceed as follows:
- Remove the machine’s worktop by
unscrewing the two rear retaining
screws, pull from the front and slide
out the rear slots, lifting the worktop.
- 600
820
570
600
IN05
Insert the machine after adjusting height and
levelling with the adjustable feet. When inserting the machine, ensure that the water
inlet and drain hoses are not kinked or squashed.
Levelling
Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door will
not catch on the levelling spacers on either side of the
cabinet.
If the door does not close correctly, loosen or tighten
the adjustable feet until the machine is perfectly level.
IN06
IN07
31
152976 17/1
15-09-2001
9:10
Pagina 32
Connecting the water supply
●
Your dishwasher should be connected to a cold water supply.
●
Never connect your dishwasher to open hot water appliances and continuous
flow heaters!
We advise you use a cold water supply because a hot water supply is not always
efficient with very soiled crockery as it shortens the washing programmes.
Avoid bends or kinks in the hose which could prevent or slow down the water supply.
If the machine is connected to new pipes or pipes which have not been used for a
long time, you should run the water for a few minutes before connecting the inlet
hose. This will prevent deposits of sand or rust clogging the inlet hose.
The water pressure must be within the limits given in the technical specifications.
Your dishwasher has been built in accordance with the valid regulations governing
water-consuming appliances and is equipped with safety devices which prevent used
water from flowing back into the drinking water mains.
Do not use, for connection, old hoses which been used in another appliance.
Water outlet connection
The end of the drain hose can be connected as follows:
1. To the sink outlet siphon, securing it if necessary with a clip.
2. Hooked over the edge of the sink using the special curved plastic guide provided.
3. To a wall outlet provided with vent-hole, minimum internal diameter 4 cm.
2
min 4 cm
3
18
min 30 cm
max 100 cm
max 100 cm
Ø
Ø
21
1
CS09
32
The waste connection must be at a height of between 30 cm (minimum) and 100 cm
(maximum) from the floor.
It makes no difference which way the drain hose faces, either to the right or left of
the dishwasher.
Avoid bending or kinking the hose as this could prevent or slow down the discharge
of water.
152976 17/1
15-09-2001
9:10
Pagina 33
Extension hoses
The necessary extension hoses can be obtained from specialist shops or from your
local Service Force Centre.
The extension hose must be no longer than 2 metres and its internal diameter must
be no smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used for connection to the waste
outlet must be no smaller than the diameter of the drain hose.
min 30 cm
max 100 cm
+ 2 m max
max 100 cm
Ø 18
Ø 21
Arrange the extension hose horizontally along the floor and allow it to rise only
where it is to be connected to the drain.
CS10
Protection against flooding
The machine is fitted with a device in the bottom of the machine to protect against
flooding. the device will operate if there are any water leaks in the machine however
it will only operate if the machine is on.
In case of intervention, turn off the water tap and call the Service Force Centre.
33
152976 17/1
15-09-2001
9:10
Pagina 34
Electrical connection
If the plug that is fitted to your appliance is not suitable for the socket, it must be
cut off and the appropriate plug fitted.
Important!
The wires on the mains lead are coloured in accordance with the following
code:
Green and Yellow
-Earth
Blue
-Neutral
Brown
-Live
If you fit your own plug, the colours of the wires in the mains lead of your appliance
may not correspond with the markings identifying the terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the terminal in the plug
which is marked with the letter "E" or the earth symbol
or coloured
green and yellow.
2. Connect the Blue (neutral) wire to the terminal in the plug which is
marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug which is marked
with the letter "L" or coloured red.
CE03
34
152976 17/1
15-09-2001
9:10
Pagina 35
The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI
fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is
indicated by the coloured insert at the base of the product.
A replacement cover/carrier must be obtained from your local Service Force Centre.
This appliance must be earthed.
The manufacturer declines any responsibility should this safety measure
not be observed.
Warning!
A cut-off plug inserted into a 13amp socket is a serious safety (shock)
hazard. Ensure that the cut-off plug is disposed of safely.
35
152976 17/1
15-09-2001
9:10
Pagina 36
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
© Electrolux Household Appliances Limited 2001
UK
152976 17/1