Instruction manual | Electrolux 6430 Refrigerator User Manual

I
N
F
O
INSTALLATION AND INSTRUCTION MANUAL
REFRIGERATOR
2222682-53
ER 6430 U
CONTENTS
Instructions for the User
Instructions for the Installer
Important Safety Instructions
3
Technical Specifications
13
Description of the Appliance
4
Installation
13
Positioning
Operation
4
Before use
Setting the temperature
Fresh food refrigeration
The door shelves
Normal Operating Sounds
4
4
4
5
5
Health and Safety guidelines
6
Defrosting
6
Maintenance and Cleaning
7
Internal cleaning
Periodic cleaning
Changing the light bulb
When the appliance is not in use
7
7
7
7
Something Not Working?
8
Service and Spare Parts
9
Customer Care Department
9
Electrolux Service Force
10
Guarantee Conditions
12
Electrical Connection
14
Building-in Instructions
15
Grid preparation
Door reversal
Building in the appliance under a worktop
Fitting the plinth
2
13
15
15
16
20
IMPORTANT SAFETY INSTRUCTIONS
These warnings are provided in the interests of your safety. Ensure that you understand them all
before installing or using this appliance. Your safety is of paramount importance. If you are unsure
about any of the meanings of these warnings contact the Customer Care Department.
Prior to Installation
■
General Safety
Check the appliance for transport damage. Under
no circumstance should a damaged appliance be
installed. In the event of damage please contact
your retailer.
■
■
Installation
■
■
■
■
■
■
This appliance is heavy. Care should be taken
when moving it.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Ensure that the appliance does not stand on the
electrical supply cable.
Important: if the supply cable is damaged, it must
be replaced by authorised service or qualified personnel using a special cable of the same type.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall, but leaving the required
distance for ventilation, as stated in the installation instructions.
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow
the refrigerant to settle.
■
■
■
During Use
■
■
■
■
■
The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
During transportation and installation of the appliance, be certain that none of the components of
the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
- avoid open flames and sources of ignition.
- thoroughly ventilate the room in which the
appliance is situated.
■
■
Before cleaning, always switch off the appliance
and disconnect from the electrical supply.
When unplugging always pull the plug from the
mains socket, do not pull on the cable.
Servicing
■
■
Child Safety
■
This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs. It
is not intended for commercial or industrial use.
Containers with flammable gases or liquids can
leak at low temperatures. Do not store any containers with flammable materials, such as spray
cans, fire extinguisher refill cartridges etc. in the
refrigerator.
Maintenance and Cleaning
Refrigerant
■
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by authorised technicians.
Take utmost care when handling your appliance so as not to cause any damages to the
cooling unit with consequent possible fluid
leakages.
The appliance must not be located close to
radiators or boilers.
Avoid prolonged exposure of the appliance to
direct sunlight.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.
Do not allow children to tamper with the controls
or play with the product.
There is a risk of suffocation! Keep packaging
material away from children!
This product should be serviced by an authorised
engineer and only genuine spare parts should be
used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service
Force Centre.
At the end of the Appliance Life
■
■
3
When disposing of your appliance use an authorised disposal site.
Remove the plug and ensure that any locks or
catches are removed, to prevent young children
being trapped inside.
DESCRIPTION OF THE APPLIANCE
➀
➁
➂
➃
➄
Dairy compartment
Bottle storage shelf
➄
Salad bins
Storage shelves
Thermostat control
➀
➃
➂
➁
OPERATION
Before use
When altering the temperature setting, allow 24
hours for the temperature to stablise before making
further changes.
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda
(5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Important
If the fridge is not defrosting correctly, it is possible that because a very low temperature has
been selected, the motor is working continuously, which prevents the defrost cycle from
operating.
During prologed periods of abnormally hot
weather, if the thermostat is set on too high a
number, the cooling system may operate continuously and the fridge cooling plate may not
defrost. Turning the knob to a lower number
will cause the automatic defrosting to resume.
Setting the temperature
The temperature inside the refrigerator is regulated
by a thermostat with 6 temperature positions and one
«OFF» (O) position.
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat dial to the required position.
An intermediate position is usually the most suitable,
although the temperature will be affected by:
l Room temperature
l How often the door is opened
l How much food is stored
l Position of the appliance
In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
Fresh food refrigeration
To obtain the best performance, do not store warm
food or evaporating liquids in the refrigerator; do
cover or wrap the food, particularly if it has a strong
flavour.
4
Do not cover the shelves with any protective material,
such as paper, cardboard or plastic, which may
obstruct the air circulation through them.
To help you use your refrigerator correctly, here are
some more useful hints:
Raw meat (beef, pork, lamb & poultry): wrap in
polythene bags and place on top of the salad drawers.
Meat can only be stored safely in this way for one
or two days at the most.
Fruit & vegetables: these should be thoroughly
cleaned and placed in the bottom salad drawers.
Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.
The walls of the refrigerator are equipped with runners so that shelves can be positioned as desired.
D040
The door shelves
For more thorough cleaning, the butter shelf and the
bottle shelf can be removed by pulling them in the
directon of the arrows, then refitting them in position.
Normal Operating Sounds
You may hear faint gurgling or bubbling sounds when
the refrigerant is pumped through the coils below, to
the cooling evaporator.
When the compressor is on, the refrigerant is being
pumped round, and you will hear a whirring sound or
pulsating noise from the compressor. A thermostat
controls the compressor, and you will hear a faint
‘click’ when the thermostat cuts in and out.
5
HEALTH AND SAFETY GUIDELINES
Because of consumer demand, preservatives have been removed from many pre-prepared foods. This
together with the changes in shopping habits to a once-a-week shop, mean that safe handling and
storage of food is even more important than ever.
The following tips should help you to ensure that
the food in your home is in as perfect condition
as possible.
■
Keep the time between buying chilled food and
placing it in your fridge as short as possible. Tests
showed that the temperature of 1 litre of orange
juice rose to 22°C in an hour between the supermarket and home. It then took 11 hours to get
down to 7°C in the refrigerator.
■
Never allow spillages to dry and harden.
■
Store eggs in the egg rack provided in the refrigerator door. Discard any broken or chipped eggs.
■
Regularly check the refrigerator door seal to
ensure that it is clean and free from debris.
■
Keep the refrigerator door closed as much as possible.
■
Always wash your hands with soapy water and
dry them with a clean towel before handling food.
■
Do not push food together too much, try to allow
air to circulate around each item.
■
■
Cool cooked food as quickly as possible but do
NOT place in the refrigerator until cool. (Leave
food in a cool place in order that it can then be
placed in the refrigerator as soon as possible).
Keep work surfaces clean and avoid cross contamination by not using the same work surface or
knife, without washing them thoroughly in
between.
■
Do NOT mix raw and cooked meat, they must be
in separate containers. Take care not to let the
meat juices drip onto other food. If the meat does
drip, remove everything and clean thoroughly.
■
Do not store food uncovered.
■
Remove suspect food from your refrigerator and
clean (Refer to “Maintenance and Cleaning”).
DEFROSTING
The refrigerator automatically defrosts every time the
compressor stops. The water is discharged, via the
pipe, into a tray located beneath the appliance adjacent to the compressor, where it evaporates.
Important
To avoid defrost water overflowing and dripping
onto the food in the fridge, periodically clean
the water discharge hole (F) situated under the
salad bins. Use the special cleaner provided
(P) which you will find already inserted into the
discharge hole
P
S.I.011
6
F
MAINTENANCE AND CLEANING
Before any maintenance or cleaning work is carried
out, DISCONNECT the appliance from the ELECTRICITY supply.
Changing the light bulb
Should the interior light fail to work, first switch off the
appliance and disconnect from the electricity supply,
then replace the bulb as follows:
Warning
This appliance contains hydrocarbons in its
cooling unit maintenance and recharging must
therefore only be carried out by authorised
technicians.
1. Unscrew the light cover and then pull it outward
by pressing as shown in the figure. Unscrew the
bulb and replace it with a new 15 watt bulb (available from your nearest Electrolux Service Force
centre).
Internal cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHLY PERFUMED CLEANING PRODUCTS OR WAX POLISHES, TO CLEAN THE INTERIOR AS THESE WILL DAMAGE THE SURFACE
AND LEAVE A STRONG SMELL.
Clean the drain hole of the water trough at regular
intervals and make sure that the drain hole is never
obstructed, so that the defrost water may flow freely.
D411
2. Replace the light cover by sliding it into its original
position and replacing the screw.
Important
Do not use abrasive products.
When the appliance is not in use
When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all foods
and clean the appliance, leaving the door ajar to prevent unpleasant smells.
Periodic cleaning
The appliance is equipped with a ventilation grid.
Keep clean to guarantee good ventilation and good
working order of the appliance.
An accumulation of dust will affect the performance
of the appliance and cause excessive electricity consumption.
The structure of the appliance permits cleaning of the
rear zone close to the wall, using a vacuum cleaner.
1. Remove the plinth (1), then the ventilation grid (2);
2. Carefully pull the air deflector out (3), checking
that there is no water left from the defrosting.
3
S.I.013
7
2
1
SOMETHING NOT WORKING?
Before contacting your local Service Force Centre check the following points.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
Symptom
Solution
No power to appliance
- Check there is power at the socket.
- Check there is not a power cut by checking the household lights.
- Check the fuse has not blown.
The light does not come on
- Ensure that the bulb is correctly fitted.
- Replace the bulb if it has blown.
- Check the door light switch is not jammed.
The temperature in the fridge or freezer section is too
high
- Check the ambient temperature is within the appliances
operating limits of 10˚C to 38˚C.
- Check the thermostat is turned to the correct setting relative to ambient conditions.
The compressor runs continuosly
- Adjust the thermostat control knob to give correct temperature control. See page 4.
- Check that the door is closed.
- Large quantities of food have recently been placed in
the cabinet and/or door is frequently opened.
- Check that air ventilation is not obstructed.
Excessive frost and ice has built up
- Ensure the door is not left open.
- Check that nothing is preventing the door from closing.
- Is the door gasket intact and clean.
Noise
- Refer to normal operating sounds.
Water under the salad bins
- Check the drain hole is not blocked. (see Maintenance
and Cleaning).
If after the above checks, there is still a fault, call your local Service Force Centre.
In-guarantee customers should ensure that the above checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for any in-guarantee service calls.
8
SERVICE AND SPARE PARTS
In the event of your appliance requiring service, or if
you wish to purchase spare parts please contact
your local Electrolux Service Force Centre by
telephoning:
0870 5 929929
Your telephone call will be automatically routed to
the Service Centre covering your post code area.
The addresses are listed on the following pages.
Before calling out an engineer, please ensure you
have read the details under the heading “Something
Not Working” and have the model number and purchase date to hand.
Please note that it will be necessary to provide
proof of purchase for any in-guarantee service
calls. In-guarantee customers should ensure that
the checks under the heading “Something Not
Working” have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown.
CUSTOMER CARE DEPARTMENT
For general enquiries concerning your Electrolux
appliance or for further information on Electrolux
products please contact our Customer Care
Department by letter or telephone as follows:
Customer Care Department
Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 950 950 (*)
(*) calls to this number may be recorded for training
purposes.
9
To contact your local Service Force Centre telephone 08705 929 929
CHANNEL ISLANDS
GUERNSEY
Guernsey Electricity
PO Box 4
Vale, Guernsey
Channel Islands GY1 3AD
JERSEY
Jersey Electricity Company
Haut De L’orme
Rue De Haut De L’orme
Trinity
Jersey
Channel Islands JE3 5FG
SCOTLAND
ABERDEEN
54 Claremont Street
Aberdeen AB10 6RA
AUCHTERMUCHTY
33a Burnside
Auchtermuchty
Fife KY14 7AJ
ISLE OF LEWIS
KELSO
ORKNEY
PERTH
(OWN SALES)
SHETLAND
BLANTYRE
Unit 5
Block 2
Auchenraith Ind. Estate
Rosendale Way
Blantyre G72 0NJ
(OWN SALES)
SHETLAND
(OWN SALES)
DUNOON
EDINBURGH
GLASGOW
INVERNESS
ISLE OF ARRAN
93 Irish Street
Dumfries
DG1 2 PQ
7 Hill Street
Dunoon
Argyll
PA23 7AL
(OWN SALES)
Unit 3BI
Smithton Ind. Estate
Smithton
Inverness IV2 7WL
Arran Domestics
The Douglas Centre
Brodick
Isle of Arran KA27 8AJ
ISLE OF BARRA
J Zerfah
244 Bruernish
Isle of Barra
Western Islands HS9 5QY
ISLES OF BUTE
Walker Engineering
Glenmhor
Upper Serpentine Road
Rothesay
Isle of Bute PA20 9EH
2, 6 & 8 Woodmarket
Kelso
Borders
TD5 7AX
Unit 356a
Dukesway Court
Dukesway
Gateshead NE11 0BH
GRIMSBY
7 King Street
Kirkwall
Orkney
KW15 1JF
15 Hainton Avenue
Grimsby
N. E. Lincs
DN32 9AS
HULL
Scottish Hydro Electric
Central Warehouse
Inveralmond
Perth PH1 3AF
Unit 1
Boulevard Industrial Estate
Hull
HU3 4AY
LEEDS
64-66 Cross Gates Road
Cross Gates
Leeds
LS15 7YS
3-4 Carlton Place
Lerwick
Shetland
ZE1 0PW
Bolts Shetland
26 North Road
Lerwick
Shetland ZE1 0PE
NEWTON AYCLIFFE Unit 23
Northfield Way
Aycliffe Industrial Park
Newton Aycliffe
DL5 6EJ
Leask Electrical
Harisdale
Symbister, Whalsay
Shetland ZE2 9AA
Pennine House
Roman Ridge Road
Sheffield
S9 1GB
NORTH WEST
NORTHERN IRELAND
BELFAST
Unit 12
Dumbryden Ind. Estate
2 Dumbryden Road
Edinburgh
EH14 2AB
Unit 4
Wellington Road
Bishopriggs
Glasgow G64 2SA
GATESHEAD
NORTH EAST
SHEFFIELD
WHALSAY
DUMFRIES
ND Macleod
16 James Street
Stornoway
Isle of Lewis PA87 2QW
Owenmore House
Kilwee Business Park
Dunmurry
Belfast
BT17 0HD
BIRKENHEAD
1 Kelvin Park
Dock Road
Birkenhead
CH41 1LT
CARLISLE
Unit 7
James Street Workshops
James Street
Carlisle
Cumbria
CA2 5AH
WALES
CARDIFF
Unit 4
Guardian Industrial Estate ISLE OF MAN
Clydesmuir Road
Cardiff
CF2 2QS
South Quay Ind. Estate
Douglas
Isle of Man
IM1 5AT
CLYWD
Unit 6-7 Coed Parc
Abergele Road
Rhuddlan
Clwyd
LL18 5UG
BOLTON
Unit B
Central Industrial Estate
St Marks Street
Bolton
BL3 6NR
DYFED
Unit 9
St. Clears Business Park
Tenby Road
St. Clears
Carmarthen
SA33 4JW
PRESTON
Unit 250
Dawson Place
Bamber Bridge
Preston
Lancashire PR5 8AL
STOCKPORT
OSWESTRY
Plas Ffynnon Warehouse
Middleton Road
Oswestry
SY11 2PP
Unit 20 Haigh Park
Haigh Avenue
Stockport
SK4 1QR
10
To contact your local Service Force Centre telephone 08705 929 929
MIDLANDS
BIRMINGHAM
66 Birch Road East
Wyrley Trading Estate
Witton
Birmingham
B6 7DB
BOURNE
Pinfold Road
Bourne
PE10 9HT
BRIDGNORTH
68 St. Mary’s Street
Bridgnorth
Shropshire
WV16 4DR
GLOUCESTER
HEREFORD
HIGHAM FERRERS
101 Rycroft Street
Gloucester
GL1 4NB
Units 3 & 4
Bank Buildings
Cattle market
Hareford
HE4 9HX
30 High Street
Higham Ferrers
Northants
NN10 8PL
ILKESTON
Unit 2
Furnace Road
Ilkeston DE7 5EP
LEICESTER
Unit 7
Oaks Industrial Estate
Coventry Road
Narborough
Leicestershire
LE9 5GF
LINCOLN
Unit 8
Clifton Street
Stone Field Park
Lincoln
LN5 8LQ
NEWCASTLE
UNDER LYME
REDDITCH
TAMWORTH
WORCESTER
BECKENHAM
11a Gardner Ind. Estate
Kent House Lane
Beckenham
Kent BR3 1QZ
CHELMSFORD
Hanbury Road
Widford Ind. Estate
Chelmsford
Essex
CM12 3AE
COLINDALE
Unit 3
Sterling Park
Claymore
Tamworth
B77 5DQ
Units 1 & 2
Northbrooks Close
Gregorys Mill Ind. Estate
Worcester
WR3 8BP
Unit 14
Capitol Park
Capitol Way
Colindale
London NW9 0EQ
ELTHAM
194 Court Road
Mottingham
Eltham
London SE9 4EW
ENFIELD
284 Alma Road
Enfield
London
EN3 7BB
GRAVESEND
Unit B4
Imperial Business Estate
West Mill
Gravesend
Kent
DA11 0DL
IPSWICH
Unit 6C
Elton Park Business Centre
Hadleigh Road
Ipswich
IP2 0DD
LETCHWORTH
16-17 Woodside Ind. Park
Works Road
Letchworth
Herts
SG6 1LA
LONDON
2 - 4 Royal Lane
Yiewsley
West Drayton
Middlesex
UB7 8DL
18-21 Croft Road
Brampton Ind. Estate
Newcastle under Lyme
Staffordshire
ST5 0TW
13 Thornhill Road
North Moons Moat
Redditch
Worcestershire
B98 9ND
SOUTH EAST
LONDON & EAST ANGLIA
MAIDENHEAD
Reform Road
Maidenhead
Berkshire
SL6 8BY
MOLESEY
10 Island Farm Avenue
West Molesey
Surrey
KT8 2UZ
NEWBURY
9 Pipers Court
Berkshire Drive
Thatcham
Berkshire
RG19 4ER
NORWICH
2b Trafalgar Street
Norwich
NR1 3HN
SUNBURY
Unit 1a
The Summit
Hanworth Road
Sunbury on Thames
TW16 5DB
11
ASHFORD
Unit 2
Bridge Road Business Centre
Bridge Road
Ashford
Kent TN23 1BB
FLEET
Unit 1
Redfields Ind. Estate
Church Crookham
Fleet
Hampshire GU13 0RD
HAYWARDS
HEATH
21-25 Bridge Road
Haywards Heath
Sussex RH16 1UA
TONBRIDGE
Unit 30
Deacon Trading Estate
Morley Road
Tonbridge
TN9 1RA
SOUTH WEST
BARNSTAPLE
Main Road
Fremington
Barnstaple
North Devon EX31 2NT
BOURNEMOUTH 63-65 Curzon Road
Bournemouth
Dorset
BH1 4PW
BRIDGEWATER
6 Herswell Business Park
Salmon Parade
Bridgwater
Somerset TA6 5PY
BRISTOL
11 Eldon Way
Eldonwall Trading Estate
Bristol
BS4 3QQ
EMSWORTH
266 Main Road
Southbourne
Emsworth
PO10 8JL
ISLE OF WIGHT
Unit 8
Enterprise Court
Ryde Business Park
Ryde
Isle of Wight PO33 1DB
NEWTON ABBOT Unit 2
Zealley Ind. Estate
Kingsteignton
Newton Abbot
TQ12 3TD
REDRUTH
Unit 7D
Pool Ind. Estate
Druids Road
Redruth
Cornwall TR15 3RH
GUARANTEE CONDITIONS
Standard guarantee conditions
We, Electrolux, undertake that if within 12 months of the date of purchase this Electrolux appliance or any part
thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair
or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:
■
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
■
The appliance has been used for normal domestic purposes only, and in accordance with the manufactuer's
instructions.
■
The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not
authoried by us.
■
All service work under this guarantee must be undertaken by an Electrolux Service Force Centre.
■
Any appliance or defective part replaced shall become the Company's property.
■
This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
■
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
■
Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside
the United Kingdom.
■
Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.
■
Products of Electrolux manufacture which are not marketed by Electrolux.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:
■
The guarantee starts from the date you first purchased your product.
■
The guarantee is for the same period and to the same extent for labour and parts as exists in the new
country of use for this brand or range of products.
■
This guarantee relates to you and cannot be transferred to another user.
■
Your new home is within European Community (EC) or European Free Trade Area.
■
The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.
■
The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your
new home. They will then ensure that the local Service Organisation is aware of your move and able to look
after you and your appliance.
France
Germany
Italy
Sweden
UK
Senlis
Nurenberg
Pordenone
Stockholm
Slough
+33
+49
+39
+46
+44
(0)
(0)
(0)
(0)
(0)
44 62 22 22
911 323 2600
1678 47053
20 78 77 50
1753 219898
12
TECHNICAL SPECIFICATIONS
DIMENSIONS
Height
Width
Depth
81,5
59,6
54
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
AVERAGE DAILY UNITS ELECTRICITY (*)
220-240 V / 50 Hz
70 W
0,47 kWh
GROSS CAPACITY
142 l
NET CAPACITY
140 l
cm
cm
cm
(*)This figure is based on standard test results in accordance with European Standard EN153. Actual consumption will depend on how the appliance is used and where it is located.
INSTALLATION
Positioning
This appliance should only be installed at a location
where the ambient temperature corresponds to the
climate classification indicated on the rating plate,
which is located on the inside left of the appliance.
The following table shows which ambient temperature
is correct for each climate classification.
SN
+10°C to +32°C
ST
+18°C to +38°C
The appliance should be located in a dry atmosphere,
out of direct sunlight and away from continuous heat
and extreme temperature, e.g. not next to a boiler or
radiator, or in a very cold room e.g. an outhouse. If
these temperatures are exceeded i.e. warmer or colder, then the appliance may not operate correctly.
For building-in and door reversal instructions please
refer to the relevant instructions on the following
pages.
13
ELECTRICAL CONNECTION
This appliance complies with the E.E.C. Directive
No. 87/308 of 2.6.87 relative to radio interference
suppression.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability
should this safety measure not be
observed.
This appliance complies with the following
E.E.C. Directive:
If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the
appropriate plug fitted.
- 73/23 EEC of 19.2.73 (Low Voltage Directive)
and subsequent amendments.
- 89/336 EEC of 3.5.89 (Electromagnetic
- Compatibility Directive) and subsequent amendments.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be
plugged into a 13amp socket in another part of your
home.
Please ensure that when the appliance is
installed it is easily accessible for the engineer
in the event of breakdown.
Important
The wires in the mains lead are coloured in
accordance with the following code:
GREEN & YELLOW
- Earth
- Neutral
- Live
13 AMP. FUSE
13 AMP
Green and Yellow
Blue
Brown
If you fit your own plug, the colours of the wires in
the mains lead of your appliance, may not correspond with the markings identifying the terminals in
your plug, proceed as follows:
Connect the Green and the Yellow (earth) wire to
the terminal in the plug which is marked with the letter «E» or the earth symbol
, or coloured green
and yellow.
BROWN
BLUE
D207
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter «L» or colured
red.
The plug moulded onto the lead incorporates a fuse.
For replacement, use a 13amp BS1362 fuse. Only
ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier
is lost. The cover/carrier is indicated by the coloured
insert at the base of the plug.
A replacement cover/carrier must be obtained from
your local Electrolux Service Force Centre.
14
CORD CLAMP
BUILDING-IN INSTRUCTIONS
Before carrying out any work, remove the plug from
the power socket.
Grid preparation
Left door opening:
A
Remove the left side (A) of the grid cutting it from the
rear (see figure).
Right door opening:
B
Remove the right side (B) of the grid cutting it from
the rear (see figure).
DO002/2
To position the grid on the appliance proceed as follows:
Apply the grid to the base of the appliance by pushing
on to the clasps (a) until they click.
a
a
DO001
Door reversal
To reverse the opening direction of the door, proceed as shown
in the figures:
6
4
1
7
8
5
2
3
1
2
15
Attention
After completion of the door reversing operation, check that the door gasket adheres to the
cabinet. If the ambient temperature is cold (i.e.
in Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by
heating up the part involved with a normal
hairdryer on a low setting.
10
13
9
12
11
3
Building the appliance in under a worktop
1. The dimensions of the recessed installation area
must correspond with those indicated in the figure.
60
0
5
min50
.
600
DO013
2. Installation kit
1xB
2xC
1xA
12
1
16
2
1
2
1
2
3. Two cabinet securing brackets are supplied with
the installation pack. They need to be assembled
onto the cabinet prior to cabinet being pushed into
the Kitchen aperture.
- To fit these brackets remove the two screws at the
top left and right hand front corners of the cabinet.
- Position the two brackets as shown in the figure
and replace the two securing screws.
Right hand
bracket
Left hand
bracket
1/a
4. Push the appliance into place. The plug socket
necessary for connection of the appliance to the
electricity supply should be positioned, so that the
plug is not placed in the recess.
596
5. To adjust the height proceed as follows:
- Loosen or tighten the two front feet.
- The rear feet are adjusted by turning the screw in
the front kick plate to the left or right.
5
55 x
ma
-
2Li89
+
6. If necessary, pads are supplied for the rear feet to
make sliding the appliance in and out of the recess
easier. To fit the pads, press them onto the rear
feet.
If required, the dimensions of these pads can be
reduced by breaking them where marked.
II52
2/a
2
1
B
115°
3
4
17
7. Screw appliance into place and retain the cabinet
with screws through the securing brackets into the
worktop or adjacent woodwork as necessary.
5
8. To mount the furniture door proceed as shown in
the figures:
2
1
a
10
C
4
3
b
6
a
b
C
clic
C
clic
7
8
18
c
UPPER PART OF KITCHEN FURNITURE PANEL
1
a
=
=
LOWER PART OF KITCHEN FURNITURE PANEL
2
275
275
x
ma
b
9
1
45
°
9/a
2
=
3
10
=
11
10
12
19
100
9. Refit the covering strip.
A
13
Fitting the plinth
Important
For the efficient operation of the appliance, it is
important that the original ventilation grid is
used.
■
580
25
25
Important
The plinth must be positioned at a minimun distance of 25 mm from the door.
DO008
20
a = 100
b = 150
■
For an opening height dimension A=820 mm and a
plinth height dimension a=100 mm, the plinth may
be fitted without adjustments. The same applies to
an opening height dimension B=870 mm and a
plinth height dimension b=150 mm.
For plinth heights greater than a=100 mm, b=150
mm, a cut should be made in the plinth, 580 mm
wide, in the centre of the appliance position, leaving a remaining height of a=100 mm, b=150 mm.
Attach plinth to the kitchen units.
A = 820
B = 870
■
- 80
© Electrolux Household Appliances Limited 2000
Download PDF

advertising