Electrolux 67160 KF-N Cooktop User Manual

67160 KF-N
User manual
Ceramic glass
induction hob
2
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional
design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
In addition to this you find environmental and energy saving aspects as an integral part of our products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a
safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
3
The following symbols are used in this user information:
Warning! This must be read! Important advice for the safety of persons and
information on avoiding damage to the appliance
General information and advice
2
Information on environmental protection
1
z
Dangerous voltage
Contents
3
Contents
Operating Instructions
4
Safety instructions
4
Description of the Appliance
Cooking surface layout
Control panel layout
Touch Control sensor fields
Displays
Residual heat indicator
Operating the appliance
Switching the appliance on and off
Setting the heat setting
Switching the double ring cooking zone on and off
Switching the STOP+GO function on and off
Using the automatic warm-up function
Locking/unlocking the control panel
Using the child safety device
Switching the power function on and off
Using the timer
Automatic switch off
Tips on Cooking and Frying
Cookware
Cookware for induction cooking zones
Tips on energy saving
Examples of cooking applications
Cleaning and Care
6
6
6
7
8
8
9
9
9
10
10
11
12
13
14
15
18
19
20
21
22
23
24
What to do if …
25
Disposal
27
Installation Instructions
Safety instructions
Assembly
Rating Plate
Guarantee/Customer Service
28
28
30
35
36
Service
39
4
Operating Instructions
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not
covered by the warranty.
Correct use
• This appliance is not intended for use by children or other persons whose
physical, sensory or mental capabilities or lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of
food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appliance on,
we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered
service engineers.
• Built-in appliances may only be used after they have built in to suitable builtin units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric
shock.
• Repairs to the appliance must only be carried out by trained registered service
engineers.
Safety instructions
5
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep their upper body at least 30 cm
from induction cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal, such as knives, forks,
spoons and saucepan lids on the cooking surface, as they can get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic
and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or
frying pans to boil dry.
• The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered.
6
Description of the Appliance
Description of the Appliance
Cooking surface layout
Induction cooking zone 1400 W
with power function 2500 W
Induction cooking zone 2200 W
with power function 3100 W
Double ring cooking zone 700/1700 W
Control panel
Single cooking zone 1200 W
Control panel layout
Power function with
pilot light
Lock
with pilot light
STOP+GO
with pilot light
On/Off
with power indicator
Cooking zone indicators
Timer function
Display
Heat setting selection
Timer display
Timer
Connection
double ring cooking zone
with power indicator
Description of the Appliance
7
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals.
Touch the sensor fields from above, without covering other sensor fields.
Sensor field
On / Off
Increase settings
Decrease settings
Timer
Increase settings
Reduce settings
Lock
Power
Stop+Go
Double ring switch
Function
To switch the appliance on and off
Increasing heat setting
Decreasing heat setting
Timer selection
To increase Timer time
To reduce Timer time
Locking/unlocking the control panel
Switching the power function on and
off
To switch the Keep Warm setting on/
off
Switches outside ring
on and off
8
Description of the Appliance
Displays
Display
Keep warm setting
2-6
Heat settings
Heating setting plus
decimal point
Automatic warm up
function
Fault
Pan detection
Residual heat
Child safety device
Power
Automatic switch off
Description
Cooking zone is switched off
Keep warm setting/STOP+GO function
is set
Heat setting is set
Intermediate heat setting is set
Automatic warm-up function is
activated
Malfunction has occurred
Cookware is unsuitable or too small or
no cookware has been placed on the
cooking zone
Cooking zone is still hot
Lock/child safety device is engaged
Power function is switched on
Switch off is active.
Residual heat indicator
1
3
Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator
.
Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in
the base of the cookware. The glass ceramic is merely heated by the residual
heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of
the electronics.
Operating the appliance
9
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Switch on
Switch off
3
Control panel
Touch for 2 seconds
Touch for 1 second
Display
/
/ none
Pilot light
lights up
goes out
After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
Increase
Decrease
Switch off
3
Control panel
Touch
Touch
Touch and at the same time
The keep warm setting
lies between
and
Display
to /
to
. It is used to keep food warm.
10
Operating the appliance
Switching the double ring cooking zone on and off
With the double ring cooking zone the heating surface can be matched to the
size of the cookware.
Switch on
Switch off
Touch
Touch
Control panel
for 1-2 seconds
for 1-2 seconds
Pilot light
lights up
goes out
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
Control panel
To switch on Touch
To switch off Touch
3
3
Display
heat setting that was previously
set (not automatic warm up
function)
Timer functions are not stopped by STOP+GO.
STOP+GO locks the whole control panel except the sensor field
.
Operating the appliance
11
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switches back to the cooking setting
that was originally set.
Step
1.
2.
3.
4.
3
Control panel
Setting the level
/
Place to one side for a moment
touch
touch in order to set the desired
cooking setting
Display
/
/
Æ until /
after 3 seconds
If during the automatic warm up a higher heat setting is selected, e.g. from
Á to Ã, the automatic warm up is adjusted.
The length of time that the automatic warm up function operates depends on
the heat setting selected.
Heat
setting
Length of the automatic
Length of the automatic
warm up
warm up
radiation element [min:sec] induction [min:sec]
v
0:30
0:10
1
1:00
0:10
2
1:40
0:10
2.
2:40
1:20
3
4:50
3:10
3.
5:30
4:20
4
6:30
5:50
4.
8:10
8:10
5
10:10
10:10
5.
12:20
10:30
6
2:30
2:00
6.
2:30
2:00
7
3:30
2:30
8
4:30
2:50
9
---
---
12
Operating the appliance
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked
at any time in order to prevent the settings being changed e.g. by wiping over
the panel with a cloth.
Switch on
Switch off
3
Control panel
Touch
Touch
Display
(for 5 seconds)
previously set heat setting
When you switch the appliance off, the locking function is automatically
switched off.
Operating the appliance
13
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step
Control panel
1.
Switch on appliance. (Do not set
a heat setting.)
2.
Touch for 4 seconds
The child safety device is switched on.
Display/Signal
Switching off the child safety device
Step
Control panel
1.
Switch on appliance. (Do not set
a heat setting.)
2.
Touch for 4 seconds
3.
Switch appliance off.
The child safety device is switched off.
3
Display/Signal
lights up
The child safety device can only be switched on and off, if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards.
Step
Control panel
Display/Signal
1.
Switch appliance on
2.
Touch for 4 seconds
lights up
Until the appliance is next switched off, it can used as normal. After switching
off the appliance, the child safety device is active again.
3
After overriding the child safety device, a heat setting or a function must be set
within approx. 10 seconds, otherwise the appliance automatically switches itself
off.
14
Operating the appliance
Switching the power function on and off
The power function makes more power available to the induction cooking zones,
e.g. to bring a large quantity of water to the boil quickly.
Switch on
Switch off
Control panel
Touch
Touch
Touch
Display
The power function remains activated for differing periods of time:
Cooking zone
diameter [mm]
210
145
3
Power time [min]
8
2
If the power function has ended, the cooking zones automatically switch back to
the heat setting set previously.
Power Management
The cooking zones of the cooking surface
have a maximum power available to them.
Two cooking zones make up a pair (see figure).
So that the Power function can always be
carried out, Power Management may reduce the power of the other cooking zone
in the pair
Example: heat setting 9 is selected on a
cooking zone. The Power function is
switched on for the cooking zone paired up
with it. The Power function is performed,
but heat setting 9 on one cooking zone and Power function on the other cooking zone of a pair exceeds the maximum output for both. Therefore Power Management reduces the first cooking zone that was switched on from 9 to 7, for
example, and the display for this cooking zone alternates between 9 and 7 and
then remains on the current maximum of 7. (Whether the display alternates between 9 and 7 or 9 and 6 or other values, depends on the appliance type and the
size of the cooking zone.)
Operating the appliance
15
Using the timer
3
3
Function
Condition
Automatic cut-out
a heat setting is set
Countdown timer
cooking zones not in use
Outcome after the
time has elapsed
acoustic signal
00 flashes
Cooking zone switches
off
acoustic signal
00 flashes
If a heat setting is set on this cooking zone in addition to a countdown timer,
the cooking zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step
3
3
1.
Control panel
Touch
once
Display
Pilot light of the first
cooking zone flashes
2.
Touch
once
Pilot light of the second
cooking zone flashes
3.
Touch
once
Pilot light of the third
cooking zone flashes
4.
Touch
once
Pilot light of the fourth
cooking zone flashes
If the pilot light is flashing more slowly, the heat setting can be set or modified.
If other timer functions are set, after a few seconds the shortest remaining time
of all the timer functions is displayed and the corresponding pilot light flashes.
16
Operating the appliance
Setting the time
Step
1.
Control panel
Indicator
Select
cooking zone Pilot light for the cooking zone selected
flashes
2.
Touch or
00 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
1.
Control panel
Indicator
Select
cooking zone Pilot light of cooking zone selected flashes faster
Time remaining is displayed
2.
Touch
The time remaining counts backwards to
00.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
1.
Control panel
Indicator
Select
cooking zone Pilot light of the selected cooking zone
flashes faster
Time remaining is displayed
2.
Touch or
01 to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Operating the appliance
17
Displaying the time remaining for a cooking zone
Step
1.
Control panel field
Display
Select cooking zone Pilot light of the cooking zone selected
flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
Control panel field
1.
Touch
Acoustic signal stops.
Acoustic signal
Acoustic signal to acknowledge.
18
Operating the appliance
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for
longer than approx. 10 seconds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off automatically. is displayed. Before being used again, the cooking zone must be set to
.
Heat setting
v, 1 - 2
3-4
5
6-9
Switches off after
6 hours
5 hours
4 hours
1.5 hours
Tips on Cooking and Frying
19
Tips on Cooking and Frying
3
Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures
and not browning foods too much.
20
Tips on Cooking and Frying
Cookware
• You can recognise good cookware from the bottoms of the pans. The bottom
should be as thick and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can
leave discolorations on the glass ceramic surface which are difficult or impossible to remove.
Tips on Cooking and Frying
21
Cookware for induction cooking zones
Cookware material
Cookware material
Suitable
Steel, enamelled steel
yes
Cast iron
Stainless steel
3
3
yes
if appropriately labelled by the manufacturer
Aluminium, copper, brass
---
Glass, ceramic, porcelain
---
Cookware for induction cooking zones is labelled as suitable by the manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is heated
within a short time.
• ... a magnet sticks to the bottom of the cookware.
Certain cookware can make noises when being used on induction cooking zones.
These noises are not a fault in the appliance and do not affect operation in any
way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom of the
cookware up to a certain point. However the magnetic part of the bottom of the
cookware must have a minimum diameter depending on the size of the cooking
zone.
Diameter of cooking zone
[mm]
210
145
3
Minimum diameter of dish base
[mm]
180
120
The cookware must be placed centrally on the cooking zone.
22
Tips on Cooking and Frying
Tips on energy saving
2
2
Place cookware on the cooking zone before it is switched on.
If possible, always place a lid on the cookware.
Tips on Cooking and Frying
23
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
Cookingprocess
suitable for
0
Residual heat, Off position
V
Keeping
Keeping cooked foods warm
food warm
1-2
Melting
Hollandaise sauce,
melting butter, chocolate,
gelatine
Solidifying Fluffy omelettes, baked eggs
Cooking
time
Tips/Hints
as required
Cover
5-25 mins.
Stir occasionally
10-40 mins.
Cook with lid on
2-3
Simmering on low
heat
Simmering rice and milkbased dishes
Heating up ready-cooked
meals
25-50 mins.
Add at least twice as
much liquid as rice, stir
milk dishes part way
through cooking
3-4
Steaming
Braising
Steaming vegetables, fish
braising meat
20-45 mins.
With vegetables add only
a little liquid (a few tablespoons)
Steaming potatoes
20-60 mins.
Use only a little liquid, e.
g.: max. ¼ l water for
750 g potatoes
Cooking larger quantities of
food, stews and soups
60-150 mins.
Up to 3 l liquid plus ingredients
6-7
Gentle
Frying
Frying escalopes, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
Steady frying
Turn halfway through
cooking
7-8
Heavy
Frying
Hash browns, loin steaks,
steaks, Flädle (pancakes for
garnishing soup)
5-15 mins.
per pan
Turn halfway through
cooking
9
Boiling
Searing
Deep
frying
Boiling large quantities of water, cooking pasta, searing meat (goulash,
pot roast), deep frying chips
4-5
Boiling
The power function is suitable for heating large quantities of liquid.
24
Cleaning and Care
Cleaning and Care
1
1
Take care! Risk of burns from residual heat.
Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid.
1
Warning! Residues from cleaning agents will damage the appliance. Remove
residues with water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1.
2.
3.
4.
Place a scraper on the glass ceramic surface at an angle.
Remove residues by sliding the blade over the surface.
Wipe the appliance with a damp cloth and a little washing up liquid.
Rub the appliance dry using a clean cloth.
Remove
immediately
when the appliance has
cooled down
sugar, food containing sugar
yes
---
plastics, tin foil
yes
---
limescale and water rings
---
yes
fat splashes
---
yes
shiny metallic discolouration
---
yes
Type of dirt
using
a scraper*
cleaner for glass ceramic or stainless steel*
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops
3
3
Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
Scratches or dark stains on the glass ceramic that cannot be removed do not
however affect the functioning of the appliance.
What to do if …
25
What to do if …
Problem
The appliance cannot be
switched on or is not operating
Possible cause
Remedy
More than 10 seconds have
Switch the appliance on again.
passed since the appliance was
switched on
The lock is switched on
Switch off the lock (See the
section “Locking/unlocking the
control panel”)
The child safety device is
switched on
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch off has been Remove any objects (pan,
triggered
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
STOP+GO is activated
The residual heat indicator is
not displaying anything
Switching off STOP+GO
The cooking zone was only on If the cooking zone is supfor a short time and is there- posed to be hot, call the Cusfore not hot
tomer Service Department.
The automatic warm up func- There is still residual heat on
tion is not switching itself on the cooking zone
The highest heat setting is set
Let the cooking zone cool
down
The highest heat setting has
the same power as the automatic warm up function
Acoustic signal sounds repeat- One or more sensor fields have Uncover sensor field
edly, appliance switches off
been covered for longer than
10 seconds
Acoustic signal sounds when
appliance is switched off
The control panel is wholly or
partly covered by objects.
Remove objects.
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic signal sounds
The On/Off sensor field has
been covered up, e.g. by a
cloth
Do not place any objects on
the control panel
Display is switching between
two heat settings
Power management is reducing the power of this cooking
zone
See the section “Switching the
power function on and off”
26
What to do if …
Problem
flashes
Possible cause
Remedy
Unsuitable cookware
Use suitable cookware
No cookware on the cooking
zone
Place cookware on the cooking
zone
The diameter of the bottom of Move onto a smaller cooking
the cookware is too small for zone
the cooking zone
Use suitable cookware
is lit
Overheating protection for the Switch off the cooking zone.
cooking zone has been trigSwitch the cooking zone on
gered
again
Automatic switch off has been Switch off the cooking zone.
triggered
Switch the cooking zone on
again
and number are displayed
1
3
Electronics fault
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system)
If after switching on again,
is displayed again, call the customer service department
If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
Disposal
27
Disposal
2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The
plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community
waste disposal facilities.
2
Old appliance
W
The symbol
on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you
purchased the product.
28
Installation Instructions
Installation Instructions
1
z
Safety instructions
Warning! This must be read!
The laws, ordinances, directives and standards in force in the country of use are
to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example drawers
may only be installed with a protective floor directly underneath the appliance.
The cut surfaces of the worktop are to be protected against moisture using a
suitable sealant.
The sealant seals the appliance to the work top with no gap.
When building in, protect the underside of the appliance from steam and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot
cookware may be knocked off the rings when doors and windows are opened.
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by installing correctly.
• The appliance must be connected to the electrical supply by a qualified electrician.
Installation Instructions
z
29
Risk of injury from electrical current.
• Loose and inappropriate plug and socket connections can make the terminal
overheat.
• Have the clamping connections correctly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate mains
cable of type H05BB-F Tmax 90°C(or higher) or an equivalent type must be
used.
• If this appliance’s mains cable is damaged, it must be replaced by a special cable (type H05BB-F Tmax 90°C; or higher) or an equivalent type. The latter is
available from the Customer Care Department.
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening
width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.
Sticking on the seal
• Clean the worktop around the cut-out area.
• Stick the single-sided adhesive sealing tape provided on the underside of the
hob around the outside edge ensuring that it is not stretched. The two ends
of the tape should join in the middle of one side. After trimming the tape (allow it to overlap by 2-3 mm), press the two ends together.
30
Assembly
Assembly
Assembly
31
32
Assembly
Assembly
33
34
Assembly
35
Rating Plate
67160KF-N
55GADDAAU
949 592 945
230 V
50 Hz
Induction 3,6 kW
6,5 kW
AEG - ELECTROLUX
36
Guarantee/Customer Service
Guarantee/Customer Service
European Guarantee
This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for
the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:
• The appliance guarantee starts from the date you first purchased the appliance which will be evidenced
by production of a valid purchase document issued by the seller of the appliance.
• The appliance guarantee is for the same period and to the same extent for labour and parts as exists in
your new country of residence for this particular model or range of appliances.
• The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred
to another user.
• The appliance is installed and used in accordance with instructions issued by Electrolux and is only used
within the home, i.e. is not used for commercial purposes.
• The appliance is installed in accordance with all relevant regulations in force within your new country of
residence.
The provisions of this European Guarantee do not affect any of the rights granted to you by law.
Guarantee/Customer Service
37
www.electrolux.com
p
t
b
Albania
+35 5 4 261 450
Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/
Belgien
+32 2 363 04 44
Bergensesteenweg 719, 1502 Lembeek
Èeská republika
+420 2 61 12 61 12
Budìjovická 3, Praha 4, 140 21
Danmark
+45 70 11 74 00
Sjællandsgade 2, 7000 Fredericia
Deutschland
+49 180 32 26 622
Muggenhofer Str. 135, 90429 Nürnberg
Eesti
+37 2 66 50 030
Mustamäe tee 24, 10621 Tallinn
España
+34 902 11 63 88
Carretera M-300, Km. 29,900
Alcalá de Henares Madrid
France
www.electrolux.fr
Great Britain
+44 8705 929 929
Addington Way, Luton, Bedfordshire
LU4 9QQ
Hellas
+30 23 10 56 19 70
4 Limnou Str., 54627 Thessaloniki
Hrvatska
+385 1 63 23 338
Slavonska avenija 3, 10000 Zagreb
Ireland
+353 1 40 90 753
Long Mile Road Dublin 12
Italia
+39 (0) 434 558500
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Latvija
+37 17 84 59 34
Kr. Barona iela 130/2, LV-1012, Riga
Lithuania
+3702780607
Žirmūnų 67, LT-09001 Vilnius
Luxembourg
+352 42 431 301
Rue de Bitbourg, 7, L-1273 Hamm
Magyarország
+36 1 252 1773
H-1142 Budapest XIV,
Erzsébet királyné útja 87
Nederland
+31 17 24 68 300
Vennootsweg 1, 2404 CG Alphen aan den Rijn
Norge
+47 81 5 30 222
Risløkkvn. 2 , 0508 Oslo
Österreich
+43 18 66 400
Herziggasse 9, 1230 Wien
Polska
+48 22 43 47 300
ul. Kolejowa 5/7, Warszawa
Portugal
+35 12 14 40 39 39
Quinta da Fonte - Edificio Gonçalves Zarco
- Q 35
2774 - 518 Paço de Arcos
Romania
+40 21 451 20 30
Str. Garii Progresului 2, S4, 040671 RO
Schweiz/Suisse/
Svizzera
+41 62 88 99 111
Industriestrasse 10, CH-5506 Mägenwil
Slovenija
+38 61 24 25 731
Electrolux Ljubljana d.o.o.
Gerbièeva 98, 1000 Ljubljana
Slovensko
+421 2 43 33 43 22
Electrolux Slovakia s.r.o., Electrolux
Domáce spotrebièe SK, Seberíniho 1, 821
03 Bratislava
Suomi
www.electrolux.fi
Sverige
+46 (0)771 76 76 76
Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm
38
Guarantee/Customer Service
p
t
b
Türkiye
+90 21 22 93 10 25
Tarlabaþý caddesi no : 35 Taksim
Istanbul
Ðîññèÿ
+7 495 937 7837
129090 Ìîñêâà, Îëèìïèéñêèé ïðîñïåêò, 16,
ÁÖ „Îëèìïèê“
Óêðà¿íà
+380 44 586 20 60
04074 Êè¿â, âóë.Àâòîçàâîäñüêà,
2a, ÁÖ „Àëêîí“
Service
39
Service
In the event of technical faults, please first check whether you can remedy the
problem yourself with the help of the operating instructions (section “What to
do if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
In order to be able to assist you quickly, we
require the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by the appliance
– three digit letter-number combination for glass ceramic
So that you have the necessary reference numbers from your appliance at hand,
we recommend that you write them in here:
Model description:
.....................................
PNC:
.....................................
S No:
.....................................
867 200 993-N-250408-01
Subject to change without notice
www.electrolux.com