Electrolux 70168 TK Refrigerator User Manual

Professional Powered Speakers
EUROLIVE
B215D/B212D
B210D/B208D
EUROLIVE D Series — 550/200-Watt
2-Way PA Speaker Systems
with 15"/12"/10"/8" Woofer and
1.35" Aluminum-Diaphragm
Compression Driver
High-power 2-way PA sound
reinforcement speaker systems for
live and playback applications
• B215D/B212D: 550-Watts
• B210D/B208D: 200-Watts
Ultra-compact lightweight systems
deliver excellent sound even at
extreme sound pressure levels
Revolutionary Class-D amplifier
technology yields enormous power,
incredible sonic performance and
super-light weight
Internal switch-mode power
supply for noise-free audio, superior
transient response and very low
power consumption
Integrated sound processor for
ultimate system control and speaker
protection with active variable
high-pass filter
Extremely powerful, handmade
long-excursion driver provides
incredibly deep bass and
acoustic power
• B215D: 15"
• B212D: 12"
• B210D: 10"
• B208D: 8"
State-of-the-art 1.35" aluminumdiaphragm compression driver for
exceptional high-frequency
reproduction
Ultra-wide dispersion via
large-format exponential horn
Finally, great-sounding active
loudspeakers that won’t break your back
or bank account!
Thanks to our revolutionary
Class-D amplifier technology and
internal switch-mode power supplies,
EUROLIVE D Series loudspeakers provide
a much better power-to-weight ratio
than competing active speakers. Put
simply, you get all the power without
the backbreaking weight. And the sound
quality of these lightweight loudspeakers
exceeds that of our extremely popular
EUROLIVE B212A and B215A systems —
plus we’ve included two 200-Watt models,
the B210D (10") and B208D (8") for less
demanding applications.
Due to their high-efficiency design,
they crank out 550/200 of the cleanest,
punchiest audio Watts you’ve ever
heard from a compact loudspeaker
system. The integrated sound processor
provides total system control, along with
dependable protection of the LF and HF
transducers, thanks to the built-in active
high-pass filter, which virtually eliminate
distortion — even at extreme operating
levels. In addition, all four models feature
an Ultra-Low Noise (ULN) Mic/Line input
with LEVEL control and a dedicated 2-band
EQ (bass/treble) for easy control.
Intelligent by design
One of the coolest things about
active loudspeakers is the lack of backbreaking racks of amps, crossovers and
EQs that are often required to make
passive speaker systems sound almost
as good. But that comes with a trade-off
— that extra weight is transferred to the
loudspeaker, making it difficult for a single
user to heave all that mass onto the top
of a speaker stand.
Continued on next page
Page 2 of 5
EUROLIVE
B215D/B212D
B210D/B208D
Built-in ultra-low noise Mic/Line input
with Volume control and Clip LED
Dedicated 2-band EQ
Additional Line output allows linking
of additional speaker systems
Versatile trapezoidal enclosure
design allows different positioning:
• Stand mounting with
35-mm pole socket
BEHRINGER’s D Series’ “IntelligentDesign” merges the best features of active
loudspeakers with significantly lower
weight by using switch-mode power
supplies and Class-D amplifier topology.
Hidden deep inside each enclosure
is the equivalent of an active 2-way
electronic crossover, graphic EQ,
parametric EQ, mic preamp, limiter
and two Class-D power amplifiers, yet
overall weight is less than comparable
loudspeaker systems! These components
work together seamlessly to provide
optimum sound quality — and it all takes
place automatically, without you having to
touch a single knob.
Class-D Amplifier Technology delivers
high power with low weight.
Instead of operating relatively
continuously like Class AB circuits, Class-D
amps switch on and off thousands of
times per second, delivering power
only when needed. In other words, the
amplifier is either fully on or fully off,
which significantly reduces the power
losses in the output devices. This is easy in
theory and complex in practice, which is
why there are so many different Class-D
designs. Without boring you with terms
like PWM Generation and Gate Drivers,
let’s just say that to realize the benefits of
a Class-D design requires compensating
for a lot of potential problems that can
• Tilts on its side for use as
a floor monitor
Two ergonomically shaped handles
on B215D/B212D and one on the
B210D for easy carrying
Continued on next page
EUROLIVE B215D
High-quality components and
exceptionally rugged construction
ensure long life
LINK
OUTPUT
LINK
OUTPUT
Conceived and designed by
BEHRINGER Germany
INPUT
INPUT
Output Left
INPUT
Output Right
XENYX X2442USB
Keyboard
XM1800S
Electric Guitar
EPA900
EUROLIVE B120D
Page 3 of 5
EUROLIVE
B215D/B212D
B210D/B208D
cause audible distortion. BEHRINGER didn’t invent
Class-D technology, but our R&D Department has
been working for years to perfect our own version
with all the benefits of reduced weight and cool
running, and none of the drawbacks. That’s why
we invested over a solid year of research time
eliminating pitfalls like quantizing errors and
excess dead time, selecting just the right switching
frequency (and other equally tech-y terms).
And why we spent an equally long time testing
individual components to ensure they will stand up
to the rigors of the real world.
When combined with switching-mode power
supplies that replace heavy toroid transformers,
our new designs provide more dynamic punch
since the higher switching frequency reloads the
supply’s capacitors much faster. And, because
they are so much more efficient, the D Series runs
cooler and doesn’t require huge, heavy heat sinks.
The resulting speakers systems are much lighter,
making them easy to transport and set up. Our
no-compromise design means your D Series active
loudspeakers will deliver full power and incredible
fidelity all night long, with no need for rest cycles.
Instant PA system
With just a single D Series loudspeaker system
and a microphone or MP3 player, you can set
up an instant sound system. Thanks to the builtin preamp section, you just connect a dynamic
mic and raise and lower the volume with
the Level control. Plug in your sound source,
place the speaker on a tabletop or stand, and
power up. It’s just that easy. And if you need more
coverage, simply use the convenient LINK OUTPUT
XLR connector to add more active loudspeakers.
Stereo music system
You can even use two D Series enclosures for
stereo playback of your MP3, CD or old-skool
cassette deck without any additional hardware.
Just plug the appropriate stereo “breakout” adapter
into your deck’s output jack and run the cables to
the ¼" inputs on each loudspeaker. Set the Level
and EQ controls the same on both enclosures.
Voilà, instant party!
¼" input jack
for balanced
TRS and
unbalanced TS
connections
LEVEL control
with CLIP LED
for optimizing
input signal
level
MIC/LINE input
jack with internal
microphone
preamplifier for
balanced XLR
connections
EQ HIGH &
LOW shelving
equalization
controls cuts
or boosts the
treble (12kHz)
and bass (80Hz)
range by 15 dB
LINK OUTPUT
XLR jack lets you
connect additional
BEHRINGER active
loudspeaker
systems
Power LED
Marvelous monitoring
Low frequency response
Thanks to their trapezoidal
design, these cabinets can be laid on their
side providing the ideal angle for onstage
monitor wedge applications. Hookup is
simple, requiring only a single XLR or
¼" cable from the monitor send on your
mixing console and, of course, power.
Additional monitors can be chained
together via the XLR LINK OUTPUT jack
on the rear panel.
The EUROLIVE D Series was built with
extended low frequency handling in
mind. With a tuned port, internally braced,
injection molded enclosure, each model’s
custom-designed LF transducer (woofer)
really cranks out tight low end. Keep in
mind that bass response varies according
to LF transducer size, so the larger the
speaker, the more bass you will be able to
generate.
Custom-designed transducers
Accurate non-fatiguing midrange
and treble
Let’s face it; the transducers (woofers
and tweeters) are the only part of a
sound system you actually hear, so we
don’t cut any corners. While some of
our competitors are content to buy
off-the-shelf transducers and plug them
into their boxes, we custom-design and
build our transducers from scratch. Not
only do we wind our own voice coils,
we process the paper pulp into cones
and even machine our own backplates.
This enables us to control the quality,
and frankly, make better components,
like the long-excursion LF transducers
and state-of-the-art 1.35" compression
drivers we deploy in each and every
EUROLIVE enclosure.
Even if your particular application
doesn’t include booming bass, you’ll
love the sheer accuracy of these
loudspeakers. Over a year of design
went into a exponential horn/aluminum
dome compression driver combination
that could do justice to loud hard rock
or dance music — yet could also satisfy
audiophiles with its musical timbre and
attention to detail. For spoken word,
singing or acoustical instruments, they are
un-matched for being able to articulate
complex harmonic details. In fact, many
customers think it’s the most naturalsounding speaker they’ve ever heard at
anywhere near the price.
Continued on next page
Page 4 of 5
EUROLIVE
B215D/B212D
B210D/B208D
the speakers to their maximum with
no distortion — and without speaker
damage, thanks to active internal
protection circuits. Put simply, they will
astound you with their massive punch,
smooth mids and articulate top-end!
Processor controlled output
Which speaker do I need?
Dynamic processing is one of the best ways to
maximize output without sacrificing sound quality.
The D Series’ built-in circuitry automatically adjusts
program content, allowing the loudspeaker to
operate at extreme levels. It accomplishes this by
reducing bass output slightly as you approach the
limit of the transducers. This frees up LF amp and
transducer resources, so that higher overall volume
can be realized. It’s like having a tiny soundman
inside each cabinet constantly monitoring and
changing output parameters. By making subtle
changes to the crossover frequency and the audio
content, the system is able to crank out more sound
— without the slightest hint of distortion.
As you’ve probably noticed, we make
these active loudspeakers in four different
woofer sizes. Which one is right for you?
Well, let’s start with your application.
Is it spoken word in a hotel ballroom?
Hard rock in a park? A folk singer or a
drum ‘n’ bass DJ? Loud enough for an
18-year old or loud enough for your
grandmother? A huge auditorium or
a tiny club?
Physics are physics and a 15" low
frequency transducer has almost 40%
more surface area with which to move
air than a 12". A 12" has 30% more area
than a 10", and a 10" has 35% more than
an 8". So the easiest answer is “Whether to
choose one speaker cabinet over another
depends on your bass requirements.”
If you’re addressing a small meeting,
or demoing the latest “slice-o-chop-ovegamatic” at the swap meet or county
fair, the B208D might be all the speaker
you’ll need. But if you’re providing disco
to the masses at a standing room only
nightclub — or you just need to crank
it up louder, then the B215D may be a
better choice.
Continued on next page
Massive power to size ratio
Cutting-edge technology and high-fidelity
speakers are not all it takes to get your message
across — you need power, and lots of it. At the
heart of each EUROLIVE D Series loudspeaker are
two high-current amplifiers with a total output of
550-Watts for the B212D/B215D and 200-Watts
for the B210D/B208D. They’re capable of driving
Ergonomically
shaped carry
handles on each
side of enclosure
for easy transport
of system. Two
handles on
B212D/B215D,
one on B210D
State-of-the-art
1.35" aluminumdiaphragm
compression driver
for exceptional
high-frequency
reproduction
Ultra-wide
dispersion and
large format horn
Impact
resistant,
molded
enclosure.
Trapezoid shape
allows use as
a powered
monitor wedge
Extremely
powerful
15"/12"/10"/8"
long-excursion
LF transducer
provides incredibly
deep bass and
acoustic power
Rubber feet
for stacking
enclosure on
structures or
subwoofers
B215D
13⁄8" (35-mm) pole
socket for standard
speaker stands
B212D
B210D
B208D
Page 5 of 5
EUROLIVE
B215D/B212D
B210D/B208D
As you can see, “Bass requirements”
isn’t quite as easy an answer as it sounds.
The larger a room’s cubic volume, the
more energy is required to achieve
a given level of bass. In other words,
when playing the same tune in a big room
versus a small room, big room = less bass;
small room = more bass. Confused yet?
We suggest that you consult your
BEHRINGER dealer for more advice on
this subject, which is also a good time
to do a listening test —against their
competition and against each other.
Judge for yourself. And then own
BEHRINGER with money to spare.
OUTPUT POWER
AUDIO INPUTS
POWER SUPPLY
Low-frequency range
XLR (servo-balanced)
Sensitivity
-40 dBu to +4 dBu
Input impedance
20 kΩ
Voltage (Fuses)
B208D/B210D
RMS @ 1% THD
Peak power
135 W @ 8 Ω
160 W @ 8 Ω
B212D/B215D
RMS power
Peak power
280 W @ 8 Ω
450 W @ 8 Ω
High-frequency range
B208D/B210D
RMS @ 1% THD
Peak power
38 W @ 8 Ω
42 W @ 8 Ω
¼" TRS jack (servo-balanced)
Sensitivity
-40 dBu to +4 dBu
Input impedance
20 kΩ
Level control
Input Trim
Max. input level
Link
Connector
–∞ to + 30 dB
+22 dBu
65 W @ 8 Ω
100 W @ 8 Ω
XLR connector
SPEAKER POWER CAPACITY
Woofer
B212D
Size
12"
RMS @ 1% THD
250 W @ 8 Ω
Peak power handling 1000 W @ 8 Ω
B215D
Size
15"
RMS @ 1% THD
250 W @ 8 Ω
Peak power handling 1000 W @ 8 Ω
Tweeter
B212D/B215D
RMS @ 1% THD
30 W @ 8 Ω
Peak power handling 120 W @ 8 Ω
B208D/B210D
Frequency response
Crossover frequency
Sound pressure level
Limiter
Dynamic equalizer
65 Hz to 20 kHz
24 kHz
max. 113 dB SPL @ 1 m
Optical
Processor-controlled
B208D
Dimensions (HxWxD) 14.70 x 8.00 x 9.80"
249 x 205 x 372 mm
Weight
14.70 lbs / 6.70 kg
65 Hz to 20 kHz
2.4 kHz
max. 125 dB SPL @ 1 m
Optical
Processor-controlled
B210D
Dimensions (HxWxD) 18.30 x 11.50 x 9.60"
464 x 292 x 244 mm
Weight
18.80 lbs / 8.50 kg
B212D
B215D
Frequency response
Crossover frequency
Sound pressure level
Limiter
Dynamic equalizer
55 Hz to 20 kHz
1.9 kHz
max. 126 dB SPL @ 1 m
Optical
Processor-controlled
EQUALIZER
HIGH
LOW
12 kHz / ±15 dB
80 Hz / ±15 dB
For service, support or more information contact the BEHRINGER location nearest you:
Europe
Tel.: +49 2154 9206 4149
Singapore
Tel.: +65 6845 1800
Fax: +49 2154 9206 4199
Fax: +65 6214 0275
USA/Canada Tel.: +1 425 672 0816
Australia
Tel.: +61 03 9877 7170
Fax: +1 425 673 7647
Fax: +61 03 9877 7870
120 V, 60 Hz (T 6.3 A H 250 V)
240 V~, 50 Hz (T 3.15 A H 250 V)
230 V~, 50 Hz (T 3.15 A H 250 V)
100 V~, 50-60 Hz (T 6.3 A H 250 V)
max. 600 Watts
Standard IEC receptacle
DIMENSIONS/WEIGHT
B212D
Frequency response
Crossover frequency
Sound pressure level
Limiter
Dynamic equalizer
120 V, 60 Hz (T 4.0 A H 250 V)
240 V~, 50 Hz (T 2.0 A H 250 V)
230 V~, 50 Hz (T 2.0 A H 250 V)
100 V~, 50-60 Hz (T 4.0 A H 250 V)
max. 300 Watts
Standard IEC receptacle
B212D/B215D
USA / Canada
UK / Australia
Europe
Japan
Power consumption
Mains connection
LOUDSPEAKER SYSTEM DATA
B212D/B215D
RMS power
Peak power
B208D/B210D
USA / Canada
UK / Australia
Europe
Japan
Power consumption
Mains connection
Dimensions (HxWxD) approx. 21.70 x 13.60 x 10.60"
approx. 550 x 345 x 270 mm
Weight
31.9 lbs / 14.5 kg
B215D
Dimensions (HxWxD) approx. 27.2 x 17.3 x 13.2"
approx. 690 x 440 x 335 mm
Weight
45.2 lbs / 20.54 kg
Please note these specifications are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not
to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon
request of the owner.
Japan
Tel.: +81 3 5281 1180
Fax: +81 3 5281 1181
©2011 Red Chip Company Ltd. Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which
may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00401