Electrolux 8228226-02 Vacuum Cleaner User Manual

822 82 26-02
Table of Contents
Dags att njuta av livet
Time to Enjoy Life
Functional Description
For Your Own Safety
Preparations Before Use
Knappar och display
Buttons and Display
Vacuuming Programmes
Välja språk
Changing the Message Display Language
Status Messages
Questions and Answers
Frågor och svar
Trilobiter, en klass leddjur som levde för ca 250–560 miljoner år
sedan. Många levde av att dammsuga havsbotten på smådjur
och partiklar. Ryggsidan var hård och är den kanske mest kända
av de fossiler du kan se i väggar, trappor och golv av sten. Detta
urgamla djur är inspirationskälla till Trilobites futuristiska design.
Trilobite – a class of arthropods that lived on earth about 250-560
million years ago. Many received nourishment by vacuuming the
ocean beds for small animals and particles. Their backs were
hard, and they are perhaps the most well known fossils we know
today, and can often be observed embedded in stone in walls,
staircases and floors. This ancient creature has served as a source
of inspiration for the futuristic design of Trilobite.
Tömning/rengöring av filterkassett
Emptying and Cleaning the Dust Collector
Cleaning the Roller
Accessories/After-Sales Service
Tekniska data
Technical Specifications
Let me take the strain out of cleaning. Just leave me on the floor.
I will vacuum for you. Automatically.
My built-in, advanced sensors scan the room when I vacuum.
I charge myself and switch off when the job is done. Just leave
me to do the job.
Time to enjoy life
Let me vacuum the kitchen when you are surfing the net in the
other room. And I will take care of the room when you cook in the
kitchen. Let me vacuum a room each day when you go to work. I
will take care of spilled rice and sugar. I am Trilobite – your personal
vacuum cleaner. I do the vacuuming so you can do other things, as
often as you want, and without taking up your time.
“ I am Trilobite – your personal vacuum
cleaner. I do the vacuuming so you can
do other things”
Of course you’re impatient and want to switch me on right away.
No problem. All you need to do is to:
1. Charge me as shown on page 24.
2. Place me as shown on page 20.
3. Press the start button,
(upper right button).
4. Confirm by pressing the
button (lower right button).
But before starting, read the precautions on page 22-23!
Functional Description
Drive wheel
Filter lid
lock button
Place the charger close to a wall.
This way, Trilobite will find the
charger in the Wall Mapping mode.
Start Trilobite directly from the
charger or face it towards a wall
at a distance of 0.5 m. Start
vacuuming (see page 27).
NOTE! To make it easier to find the
charger, start Trilobite towards a
wall close to the charger.
Rating plate
Terminal for
manual charging
Terminals for
connection to
Roller cover
lock button
Wall mapping
Trilobite starts by first travelling
along the walls of the room to
establish the size of the room.
Battery charger
Self-adhesive magnet strip
In the Vacuum Cycle, Trilobite
moves through the room at its own.
Flexible bumper
Vacuum programmes
Trilobite has three vacuum programmes:
“Normal” Trilobite first plots the room by following the walls
(wall mapping) and then vacuums all open surfaces.
“Quick” The same as Normal, however without Wall
Trilobite vacuums an area of about one square
metre twice.
Refer to page 27 for more information on how to proceed
and when to use the different programmes.
Starting vacuuming
You will probably use the Normal programme most of the time.
This programme starts with Trilobite approaching a wall and
then mapping the walls in the room by left turns.Trilobite first
travels one full circumference of the room continually turning
left. Depending on the size and layout of the room, wall mappping may last for up to 15 minutes (25 minutes if it has found
the charger). After this,Wall Mapping ends, and vacuuming
Main cleaning program
During the main cleaning sequence,Trilobite moves freely all
over the room.Trilobite “sees” its way around with the help of
harmless ultrasound.This is the same technique that is used by
bats for navigation in the dark, for instance, and for foetal diagnosis in hospitals.When it discovers an object in its path,
Trilobite stops a few centimetres in front of it and then changes
direction.Trilobite can handle most obstacles. However, if it gets
stuck, it will continue with its cleaning program if you release it
within 20 minutes, put it back down on the floor within 30
seconds and press the “Continue Cleaning” button.
If Trilobite locates the charger during Wall Mapping (or by
chance during Quick vacuuming), it will return to the charger
unit whenever the battery charge falls below a specific level.
Once the batteries have been charged,Trilobite goes to work
again until the room has been vacuumed.When the work is
done,Trilobite returns to the charger.
If Trilobite cannot find the charger during Wall Mapping and
the battery voltage becomes too low, it will stop somewhere
in the room.
Trilobite navigates using ultrasound. During Wall Mapping, it
receives information about the size of the room.Wall mapping
serves as the basis for the estimated duration for independent
vacuuming in the Normal vacuuming mode.
NOTE! Trilobite is not fully charged upon delivery. Before
using it the first time, connect it to the battery charger. (Refer
page 24.) A full battery charge requires approximately two
Battery charger
Put the battery charger on the floor, connect it to the mains
and place it with its rear side facing the wall. Allow a free space
of 0.2 metres on the right side of the charger.When Trilobite
has completed Normal vacuuming, it returns to the charger.
The batteries are then charged and it is ready for more work.
Magnetic strips
The magnetic strips serve as “virtual walls” and are important
for correct operation. Use them to e.g., block door and wall
openings and staircases. (Refer to page 25.)
NOTE! Be sure to block staircases, landings, etc. with the magnetic
strips. If you do not do this, Trilobite can pass over e.g., a staircase
landing and cause injuries and damage to property.
A magnetic strip that has once been removed has poorer adhesive
capability.We therefore strongly recommend that you attach the
necessary strips once and for all. Never reuse a magnetic strip on
a stair or in any other important application where safety is an
important parameter. If you nonetheless choose to let the magnetic strip lie unfastened on the floor, make sure that the side
with the adhesive (with the protective paper backing) faces
downwards! Use a pair of scissors or a knife to trim the magnetic strip to the correct length. See page 9 in the user instructions
to see how the magnetic strip should be fitted. Magnetic strips
are available in a range of lengths and versions, see page 32.
Emptying the dust collector
Empty the dust collector when the dust collector icon lights
in the display. Be sure to empty the dust collector if it is not
completely full.The light indicator may be due to e.g., a
blocked filter.
For Your Own Safety
Trilobite is a machine that moves by itself. It is tempting
to prying children’s fingers and is at work when nobody is
around...With this in mind, it is important to read the
following before you put it to work.
Before vacuuming
Only use Trilobite for normal household vacuuming.
Do not use Trilobite to vacuum
• outdoors
• attics or basements
• bathrooms, washing rooms or other wet rooms
• ventilation rooms, inside false ceilings, etc.
• staircases
• tabletops, shelves, etc.
• warehouses, industrial buildings, etc.
Risk of falling
Trilobite cannot sense level differences. Because of this, it might
easily travel down a stairway or fall off a terrace, balcony, attic,
etc. It may even start climbing up inclines, e.g., slides in
children’s rooms. Consequently, be sure to close all doors and
“box” it in with magnetic strips. (Available as after sales item.)
Do not leave children alone with Trilobite. Children are curious
and Trilobite is exciting. If a child by mistake starts the machine,
he/she could become scared, run away with the risk of injuries.
Magnetic strips
Do not install magnetic strips close to magnetic objects, since
the magnetic fields generated by them may affect the function
of the magnetic strips. Consequently, move magnetic objects to
another place in the room.
Carpet wear
In exceptional cases,Trilobite’s brush roller may cause certain
carpet types to wear quickly.
Loose objects on tables, etc.
Trilobite automatically stops two centimetres in front of e.g.,
chairs, tables and pedestals. However, there is a chance Trilobite
can catch suspended electric cords, tablecloths, belts, cords, etc.
In the worst case,Trilobite will pull objects off tables and
cabinets or down your walls.
Objects on the floor
Put away small objects on the floor, which might be vacuumed
by Trilobite.
Never use Trilobite to:
• Vacuum rooms with lit candles, lamps, etc.
• Vacuum rooms with open fire or embers in an open fireplace without
• Vacuum rooms where curtains or other textiles can become stuck to
e.g., electric radiators
• Vacuum combustible substances such as petrol, white spirit, thinner, etc.
• Vacuum glowing cigarette butts
Because Trilobite can build up static electricity, never use it in
rooms where the air contains:
• Combustible gasses, such as petrol, white spirit, thinner, etc.
• Gasses from hairspray or deodorants
Do not spray the Trilobite with fragrances when it is operating.
While cleaning
Risk of personal injury
When Trilobite is working, somebody could stumble over it.
This may especially happen when Trilobite is returning to the
charger – in this case it is quiet as a whisper.With this in mind,
make sure everybody in your home knows that Trilobite is
Do NOT sit or stand on Trilobite!!!
NOTE! Do not allow Trilobite to vacuum liquids, since this
may severely damage the machine.
After vacuuming
Only allow an Electrolux service centre to replace the batteries
since the use of incorrect batteries may cause overheating. Do
not under any circumstances heat the batteries!
Cleaning the filter unit
Carefully empty the filter unit. Dust collected in the unit can
cause allergic reactions in sensitive persons. (Use only original
Electrolux micro filters for a snug fit.)
Be especially careful if there is a chance Trilobite has
vacuumed rat poison, detergent, disease carriers, etc.
Please also pay attention to the fact that Trilobite may have
vacuumed e.g., insects or spiders.
Tip: Empty the filter unit in a plastic bag, while ensuring the bag fits
tightly around the unit.
Make sure small children cannot start Trilobite by accident.
Preparations Before Use
Push the Trilobite unit with its rear against the
battery charger’s contact plate. Press it in
securely. Keep it pressed in until you hear
an acknowledging signal (this may take a
few seconds). This is particularly important
if the batteries are entirely – or almost entirely
– discharged.
An audible signals
sounds and the battery
symbol in the display
light when charging
commences. Trilobite
becomes fully charged
in about two hours at
which time “Ready”
lights in the display.
The battery
charger is placed
along a wall with a
free margin of 0.2
m to the right of
the charger.
Charging status
Battery indicator
Affixing the magnetic strip
5. Clean the surface with the
1. Room with a
enclosed cleaning pad.
Allow to dry.
6. Pull of the protective padding.
NOTE! Do not
place the
magnetic strip
at an angle of
less than 90°.
7. Affix the magnetic strip.
Warning! Credit cards, etc.
held in the immediate vicinity
may become demagnetised.
3. Rooms with doorsteps
2. Room with
wall openings
The battery indicator on Trilobite’s display shows the battery capacity during
vacuuming and charging.
Normal, Timer: Auto
Start vacuuming?
4. Rooms with doorsteps
You may well develop a personal affection to Trilobite and
appriciate its intelligence.To get the best from your Trilobite,
we recommend you consider following.
Charging (see also picture “Charging status”)
Check the battery indicator before vacuuming starts. Refer to
the lower, right picture.
A. Charge your Trilobite before vacuuming
B. You can commence vacuuming. But your Trilobite will need
to find the charger soon.
C.You don´t need a charger in the room to start vacuuming
Avoid interrupting the charging process. If unavoidable, pull the
machine away from the charger and press the On/Off button.
Vacuuming can also be started while Trilobite is still being
charged. If the power to the charger is interrupted for more
than 30 seconds during charging, and you have not manually
placed Trilobite in the charger, it will leave it, take a spin on the
floor and then connect with the charger again.
Move the furniture
Trilobite picks its way around furniture, whether freestanding
or placed flush against a wall. However, cleaning is both quicker
and more effective if you move the furniture slightly before it
is time to start cleaning. Of course, you do not need to move
heavy furniture such as sofas. On the other hand, chairs can be
conveniently placed on top of tables, a standard lamp can be
moved out of the way onto an armchair, loose rugs can be
shifted. But don’t complicate matters more than you need to!
Normally, all you need to do is to put Trilobite on the floor
and let it get on with the job of cleaning.
Loose objects
Trilobite cannot distinguish between dust, coins, rings and
expensive jewellery. Before starting Trilobite, be sure to put
away small, loose objects you do not want to lose.
Also make sure there are no cords or other objects on the floor
that may prevent Trilobite from moving freely in the room.
For your own safety
Before vacuuming, read “For your own safety” on page 22-23!
Rooms with a staircase
Trilobite cannot see staircases or other level differences.To prevent it from falling down the stairs, block access to the staircase
with a magnetic strip as shown in picture 1.
Rooms with wall openings
Trilobite is able to vacuum rooms with wall openings or walls
placed at odd angles. However, this will take longer than usual.
It is a good idea to vacuum one room at a time and separate
the rooms using magnetic strips as shown in picture 2.
Rooms with doorsteps
Always fit magnetic strip on the floor in front of the doorstep
in the room you will be vacuuming. See picture 3 an 4.
Magnetic strips and carpets
If the carpet has a pile depth of less than 15 mm, the magnetic
strip can be placed under it with maintained functionality. If the
strip is fitted on top of the carpet, be sure it is securely attached.
Always attach the magnetic strip on top of the step
(Figure 8) and never along its side (as shown in Figure 9
and 10).
Buttons and Display
Vacuuming Programmes
Dust collector full
Remaining time
Charger Found indicator
Battery indicator
Normal. Timer: Auto
Quick. Timer: 10min
Select programme?
Select programme?
Select programme?
Message display
Press the On/Off button for about one second to start and
stop Trilobite.
Information is shown in the display using status messages and
also by symbols.
(The battery capacity symbol is shown on page 24.)
The Stop button has two functions. Use it to cancel a command
or to stop Trilobite during vacuuming.
Press the Yes button to confirm a setting shown on the display.
Use the Next button to select items on the menu. Also use the
Next button as a “No” button when you do not want to select a
setting presented in the display.
Charger found
collector full
Normal vacuuming
When you start Trilobite it is ready to
start vacuuming using the Normal programme and automatic time calculation.
1. (When Trilobite is switched off and on the
floor or placed in the charger), press
2. Press
to start vacuuming.
3. If you want to select another programme,
4. If you would like to change the vacuuming
programme, press
(continue to “Quick
vacuuming” or “Spot vacuuming”).
5. If instead you would like to change the
time setting (this may be necessary when
vacuuming floor surfaces of 40 m2 or
more), press
again and confirm by
6. Use
to display “On” and then confirm
by pressing
7. Set the desired time by pressing
then confirm with
8. Press
to commence vacuuming.
NOTE! Never start Normal vacuuming at
distances under 0.5 m from a magnetic strip.
Vacuuming can always be interrupted by
. After this, pressing
recommences vacuuming, while pressing
will call up the menu.
Quick vacuuming
The Quick programme is identical with
Normal vacuuming except that wall
mapping is not included.Vacuuming
takes shorter time with the duration
preset to 10 minutes, however, the
vacuum result may be slightly inferior.
Spot vacuuming
Use Spot vacuuming to quickly vacuum
a limited area, e.g. if you have spilled
something.The area to be vacuumed is
approx. 1 m2 with Trilobite placed in the
centre of the area.The area is vacuumed
1. After you have switched on Trilobite, press
to change the programme and confirm
by pressing
2. Use
until “Quick” is displayed and
confirm by pressing
3. If you don’t want to change the time
setting, put Trilobite on the floor and start
vacuuming by pressing
4. If instead you would like to change the
time setting, press
until “On” is
displayed and confirm by pressing
5. Set the desired time by pressing
then confirm with
6. Put Trilobite on the floor and start
vacuuming by pressing
1. Switch on Trilobite, press
to change
the programme and confirm by pressing
2. Use
until “Spot” is displayed and
confirm by pressing
3. Put Trilobite in the centre of the area to
be vacuumed and start vacuuming by
NOTE! Vacuuming can always be interrupted by pressing
. After this, pressing
recommences vacuuming, while
will call up the menu.
NOTE! Vacuuming can always be interrupted by pressing
. After this, pressing
recommences vacuuming, while
will call up the menu.
Do not under any circumstances
vacuum liquids or lit or glowing objects, e.g.
cigarette butts.
Changing the
Message Display
Normal. Timer: Auto
Select time?
Select language?
Error Messages
Error: #7
See manual
Questions and Answers
Should I pay attention to anything special when I vacuum a
room for the first time?
Why does Trilobite sometime pause for approximately 10
seconds during vacuuming?
It is a good idea to be present when the room is vacuumed the first
time, for example to see if it takes unnecessary time for Trilobite to
navigate around furniture.
1. Trilobite uses two battery packs. It will briefly pause when
switching from one battery pack to the other.
Why does Trilobite stop completely during vacuuming?
Can I use Trilobite in a room with an activated alarm?
Yes, if it has a “pets monitoring” facility.
Can I hide the magnetic strips under e.g. a carpet?
Yes, as long as it not thicker than 15 mm.
It is possible to set the time duration for
Normal or Quick vacuuming.
Trilobite can show display messages in
English or Swedish.
1. Select the desired vacuum programme and
to confirm.
2. Use
until “On” is displayed and confirm
by pressing
3. Set the desired time duration using
confirm by pressing
. (For normal
vacuuming, this is the time vacuuming
lasts, i.e. not including wall mapping.)
4. Put Trilobite on the floor and start
vacuuming by pressing
1. To change the display language, switch on
Trilobite and press
2. The display will ask whether you want to
change the programme. Ignore this and
3. The display will ask whether you want to
change the time setting. Ignore this and
4. The display will ask whether you want to
change the language. Press
5. Press
to select the desired language
and confirm by pressing
Trilobite will now show display messages
in the selected language.
Status Messages
When you select a function, a status
message is shown on the display for
about seven seconds. After this, the name
of the function is shown again. It is of
course possible to change or confirm a
displayed function even while the status
message is shown.
Error Messages
The only faults that you can rectify
yourself are the ones listed below. In the
event of other error messages, recharge
and restart your Trilobite. If it still does
not start, contact our Customer Service
on 020-53 53 50.
The errors you can correct yourself are
presented below:
5. Check roller.
Is something stuck? Is it incorrectly
6 Check casters.
Is something stuck?
7 Check bumper.
Verify its spring action. Is something stuck
preventing it from moving?
12 Trilobite is stuck.
Move it and switch it on again. Also see
Normal Vacuuming on page 4.
15 Check dust cassette.
In most cases, the filter unit has probably
not been set or it is incorrectly set.
16 Check charger.
Is the charger connected to the mains?
Are the terminals on the charger and
Trilobite properly connected to each other?
21 Moisture on the circuit board.
Let the machine dry out for 12 hours.
Then try restarting it.
1. Check that it has been sufficiently charged. See page 24.
2. Did it find the charger during wall mapping?
3. The time duration for vacuuming may need to be increased.
See page 28.
Why does Trilobite crackle while vacuuming?
What is the purpose of the audible signals?
This sound is produced by the navigation system.
They confirm that a command or measure has been correctly
received or to advice a problem.
Why do I need to replace the filter so often?
Trilobite operates at different speeds. Is something wrong?
Not at all. The speed varies depending e.g. on the layout and
furniture in the room.
Is it all right to always leave Trilobite connected to the charger
when it is not is use?
The filter is actually one of the most important components in the
machine. It collects all dust, even very small dust particles (this is
why you should also use original Electrolux filters). Just like a dust
bag becomes full, so does the filter. There is no dust bag in the
Trilobite, but the filter is always a necessity.
If Trilobite starts to smell bad, what could this be due to?
Probably the dust filter was not replaced.
Yes, but make sure children cannot start it by mistake.
Is it necessary to switch off Trilobite before charging it?
How can I know whether I have placed Trilobite correctly
during manual battery charging?
What should I do when an error message is displayed?
The error messages you can correct yourself are shown on page 28.
In all other cases, contact Customer Service by calling 020-53 53 50.
What is the Cable Protection System?
A battery symbol lights in the display and you hear an audible signal.
This is simply a system that prevents Trilobite from getting stuck in
electric cords on the floor.
Why doesn’t it charge?
What is the Trilobite Stairsafe system?
1. Check that Trilobite is correctly connected to the charger
(see the question above).
2. Check that the charger has been connected to the mains.
This is a safety measure that prevents Trilobite from falling down
staircases when they have been cordoned off with the magnetic
Is it dangerous to touch the charging terminals?
Do I need to vacuum myself also?
No. They have no power in the output mode and carry max. 28 V in
the input mode.
Sometimes this may necessary no matter which vacuum programme
you use, especially in corners or along the walls in the room.
Emptying and Cleaning the Dust Collector
1. Press the button on the rear
2. ... lift off the lid.
3. Take out the dust collector.
side of Trilobite, and ...
4. Remove the grille with the
opening facing up.
5. Empty the collector (preferably in a plastic bag fit snugly
around the unit).
NOTE! Do not knock the
collector against hard
surfaces to empty it.
6. Insert a new filter and
replace the grille.
7. Replace the motor filter for
8. Replace the dust collector.
9. Replace the lid, and ...
each tenth time the dust
collector filter is replaced.
Attach the filter with the
cut-off corners facing to
the right.
10. ... push down on the lid. If
the lid cannot be properly
closed, the dust collector is
most likely set incorrectly.
Cleaning the Roller
1. Check the roller each time
the dust collector is
emptied. Begin by lifting
Trilobite by the handle.
2. Turn Trilobite upside down
and put it on a soft surface
with the display facing you.
3. Push the locking knob to
the right.
4. Raise the cover.
5. Lift the roller by the end
without a drive belt.
Remove it by holding it
at an angle and pulling
6. Clean the roller. Use a pair
of scissors to cut away
strings, threads, etc.
NOTE! Do not wash the
roller in water or other liquids.
7. Slide in the roller, take care
to secure the belt and rotate
it so that the teeth engage
8. Press the roller
9. Replace the lid. When the
three pegs in the picture are
placed correctly, the lid is in
the correct position.
10. Finally push down the lid
in place.
After-Sales Service
Technical Specifications
Declaration of conformity
(Sweden only)
Battery charger
Magnetic strips
Battery charger
To make vacuuming easier, you can purchase additional
chargers.Why not one for each room? Or one for your
weekend cottage? Order number: ZAC
Magnetic strips
You can also purchase additional magnetic strips.They come in
many different designs and with different surface coatings. For
more information, contact your dealer, our Customer Service
department, or visit our web site. Order number: ZE 110
Customer Service
Accessories, service, problems … No matter what type of
question you may have about your Trilobite, you are always welcome to contact our Customer Service on 020-53 53 50, on
weekdays between 8-11.30 and 13-16, or to get in touch via
E-post at: info.trilobite@electrolux.se
After you have purchased your Trilobite, please fill in the
information in the spaces below.This information can be found
on the rating plate underneath Trilobite. Please have this
information ready when you contact Customer Service.
Model name
350 mm
130 mm
5 kg
Noise level
approx 75 dBA
approx 90 W
Serial number:
max 0,4 m/sec.
Purchase date:
180° ultrasound
Trilobite is covered by the conditions in the Swedish Consumer
Protection Act ’91 and other EHL regulations. Please contact
your dealer or Customer Service for detailed information.
Quick stop
lift the machine
Dust collector
Vacuum duration
NOTE! Be sure to save the purchase receipt and the EHL insurance certificate.
Charging duration
1,2 l
approx 60 min/charge
Environmentally friendly Nickel-Metal hybrid
approx 2 hours
Filters come in 10+1 packages, i.e., 10 filters for the dust
collector and one motor protection filter (the latter should be
replaced for each tenth time the dust collector is emptied).The
filters are available from your dealer.You can also use our filter
subscription service (contact Customer Service) – or order them
from our web site. Order number: EF 110
The selection of accessories is continuously updated. Please
contact your dealer, Electrolux Customer service or visit our
web site for more information about new accessories.
Electrolux will not accept any responsibility for damage caused
by incorrect use or unauthorised modifications of the product.
Product designs and specifications are subject to change without
The products are protected by patents or registered designs.
Charger name
130 mm
160 mm
380 mm
0,8 kg
Input voltage
For more information on purchasing filters and other
accessories, please visit our web site at www.electrolux.se
or call 08-738 62 62 working days 07.30–17.00.
Output voltage
Cord length
Concerning Machinery Directive – 98/37/EC
Low Voltage Directive – 73/23/ECC
EMC-Directive – 89/336/ECC
Manufacturer: Electrolux Floor Care & Light Appliances
S-593 84 Västervik, SWEDEN
Declares that the automatic household vacuum cleaner Trilobite
with charger – ZA1 (machine) and ZAC (charger) conforms
with the productive requirements of the Machinery Directive
98/37/EC, the Low Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC.
It is further declared that the automatic household vacuum
cleaner Trilobite with charger – ZA1 (machine) and ZAC
(charger) conforms with the productive requirements of the
following harmonised European standards:
Machinery Directive: EN 292-1 (1992), EN 292-1 (1992) and A1
(1995), EN 1050 (1996).
Low Voltage Directive: EN 60335-1 (1994) and A11 (1995), A12
(1996), A1 (1996), A13 (1998), A15 (2000), EN 60335-2-2
(1995) and A1 (1998), A2 (2000) EN 61558-2-17 (1997).
EMC Directive: EN 55014-1 (1993) and A1 (1997), A2 (1999),
EN 55014-2 (1997), EN 61000-3-2 (1995), EN 61000-3-3
(1994), EN 55022 (1994) and A1 (1995) Class B.
Low Voltage tests and EMC-tests have been conducted by
authorised organisations.
Low Voltage tests: UL International DEMKO A/S, Lyskaer 8,
DK-2730 Herlev, DENMARK.
EMC-tests: SEMKO AB, Box 1103, S-164 22 Kista, SWEDEN.
Västervik 2001-09-28
AC 230-240 V, 50/60 Hz
max DC 28 V
Ola Carlsson, Platschef
60 W
180 cm