User manual | Electrolux LU4 9QQ Air Conditioner User Manual

electrolux EXP09CS1WI contents i
Electrolux Major Appliances
Addington Way
Luton
Bedfordshire
LU4 9QQ
telephone:
web:
Congratulations
Congratulations and thank you for choosing our portable
air conditioner. We are sure you will find your new portable
air conditioner a pleasure to use and a great asset to
your comfort. Before you use the portable air conditioner,
we recommend that you read through the whole user
manual, which provides the description of the portable air
conditioner and its functions.
To avoid the risks that are always present when you use
an electric appliance, it is important that the portable air
conditioner is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards. For
future reference, please store this manual in a safe place.
0870 5 950 950
www.electrolux.com
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say
“Oh! How did you know? That’s exactly what I wanted!” That’s the kind of
feeling that the designers at Electrolux seek to evoke in everyone who
chooses or uses one of our products. We devote time, knowledge, and a
great deal of thought to anticipating and creating the kind of appliances that
our customers really need and want.
This kind of thoughtful care means innovating with insight. Not design for
design’s sake, but design for the user’s sake. For us, thoughtful design means
making appliances easier to use and tasks more enjoyable to perform, freeing
our customers to experience that ultimate 21st century luxury, ease of mind.
Our aim is to make this ease of mind more available to more people in more
parts of their everyday lives, all over the world. So when we say we’re thinking
of you, you know we mean just that.
Contents
• Important safety instructions • Operating conditions
• Included
• Using the remote control • Installation and removal of exhaust hose
• Installation of window kit • Cool mode
• Dehumidification mode
• Fan mode • Ventilation mode
• To change air flow direction
• Turbo cool operation
• Off 1 hr timer
• Timer operation
• Plasmacluster operation
• Manual operation
• Drainage
• Maintenance
• Before calling for service
• Warranty
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Information on disposal for users
• If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.
• This air conditioner uses R410A refrigerant.
© Copyright 2006 Electrolux Home Products Pty Ltd
TINSEA519JBRZ
Print code: EPORTACUMAN
Issue date: Jun 06
user manual
portable air conditioners
(EXP09CS1WI)
Plasmacluster is a trademark of SHARP Corporation
2
5
5
6
7
9
13
13
14
15
15
16
16
17
18
18
19
20
21
22
ii contents electrolux EXP09CS1WI
electrolux EXP09CS1WI contents iii
Front view
Remote control
1
1
Air Outlet
2
Vertical louvers
1 1
1
2
3
2
4
Horizontal louvers
4
Remote control signal receiver window
5
MANUAL Button
6
OPERATION Lamp (red)
7
TIMER Lamp (orange)
8
PLASMACLUSTER Lamp (blue)
9
Air inlet
Display
Display
4 2 DISPLAY
On/Off Button
4 2DISPLAY
On/Off Button
5
6
7
8
9
9
2 Display
Display
Transmitter
Transmitter
3 1 ON/OFF
Button
Button
13 1ON/OFF
1
3
1 Transmitter
Transmitter
9
Rear view
2
2
3
4
5 2
6
7 3
8 4
9 5
10 6
11 7
12 8
13 9
14 10
11
15
12
13
14
15
3
DISPLAY
On/Off On/Off
DISPLAY
6 4 PLASMACLUSTER
Button
Button Button
4 6 4PLASMACLUSTER
52
TEMPERATURE
ButtonsButtons
TEMPERATURE
7
OFF
1 HR Button
7 5OFF
15HR
Button
6
7 3 6 PLASMACLUSTER
PLASMACLUSTER
8 6Button
MODE
Button Button Button
8 MODE
84
9 59 7TIMER
OFF
1TIMER
HR
Button
OFF
1ON
HRButton
Button
9 7ON
Button
106
7
11
MODE
Button
8 FAN
MODE
Button
10Button
Button
10 8FAN
8
12
9 9TIMER
TIMER
ON
Button
TIMER
ON Button
Button
11 9OFF
TIMER
OFF
11
Button
13
10
14
1110CANCEL
FAN
10 Button
FAN Button
12
CANCEL
Button
12
Button
15
12
TIMER
OFF Button
11 Button
TIMER
OFF Button
13
SWING
Button
13
1311SWING
14
CANCEL
Button
12 Button
CANCEL
Button
14
RESET
Button
14
1512RESET
ON/OFF
Button
ON/OFF
ButtonButtons
5 3 TEMPERATURE
5 3TEMPERATURE
Buttons
SWING
Button
13 Cool
SWING
Button
15
TURBO
Cool
Button
15 13TURBO
Button
10
11
12
13
10 Exhaust air outlet
11 Exhaust adapter
12 Exhaust hose
13 Remote control hook
14
15
16
14 Air filters
17
18
16
17
16
18
15 Drainage nozzle and stopcock
16 Power supply cord hooks
17
19 18
17
19
18
17 Drainpipe nozzle and stopcock
17
18
19
20
NOTE: Actual unit may vary slightly from above illustration.
18 Power supply cord
19 Power plug
20 Casters (4)
16
16
16
Remote control display
19
RESET
Button Button
14 RESET
15
TURBO
Cool Button
15 TURBO
Cool Button
16 SYMBOLS
MODE SYMBOLS
MODE
20
16
20
21 20
22
21
19
14
22
: DEHUMIDIFICATION
: COOL : COOL
: DEHUMIDIFICATION
MODE
SYMBOLS
: FAN
: VENTILATION
16
MODE
SYMBOLS
: FAN
: VENTILATION
: COOL: COOL: DEHUMIDIFICATION
: DEHUMIDIFICATION
17 COOL
TURBOSYMBOL
COOL SYMBOL
17
20 TURBO
21
FAN : FANSYMBOL
: VENTILATION
: VENTILATION
18 :PLASMACLUSTER
SYMBOL
18
22 PLASMACLUSTER
FAN SYMBOLS
SPEED SYMBOLS
19 FAN19SPEED
17 TURBO
COOL COOL
SYMBOL
17 TURBO
SYMBOL
21
Manual setting
: AUTO : AUTO
: Manual: setting
18 PLASMACLUSTER
SYMBOL
18 PLASMACLUSTER
SYMBOL
22
20
TEMPERATURE
ANDCOUNT
TIMER COUNT
20 19TEMPERATURE
AND TIMER
FAN
SYMBOLS
19 SPEED
FAN SPEED
SYMBOLS
DOWN INDICATOR
DOWN INDICATOR
: AUTO: AUTO
: Manual
setting setting
: Manual
21 TRANSMITTING
21 TRANSMITTING
SYMBOLSYMBOL
20 TEMPERATURE
AND TIMER
COUNTCOUNT
20 ON/TIMER
TEMPERATURE
AND
22
TIMER
ON/TIMER
OFF TIMER
SYMBOL
22 TIMER
OFF SYMBOL
DOWNDOWN
INDICATOR
INDICATOR
21
TRANSMITTING
SYMBOL
21 TRANSMITTING
SYMBOL
22
TIMER
ON/TIMER
OFF SYMBOL
22 TIMER
ON/TIMER
OFF SYMBOL
electrolux EXP09CS1WI contents i
Electrolux Major Appliances
Addington Way
Luton
Bedfordshire
LU4 9QQ
telephone:
web:
Congratulations
Congratulations and thank you for choosing our portable
air conditioner. We are sure you will find your new portable
air conditioner a pleasure to use and a great asset to
your comfort. Before you use the portable air conditioner,
we recommend that you read through the whole user
manual, which provides the description of the portable air
conditioner and its functions.
To avoid the risks that are always present when you use
an electric appliance, it is important that the portable air
conditioner is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards. For
future reference, please store this manual in a safe place.
0870 5 950 950
www.electrolux.com
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say
“Oh! How did you know? That’s exactly what I wanted!” That’s the kind of
feeling that the designers at Electrolux seek to evoke in everyone who
chooses or uses one of our products. We devote time, knowledge, and a
great deal of thought to anticipating and creating the kind of appliances that
our customers really need and want.
This kind of thoughtful care means innovating with insight. Not design for
design’s sake, but design for the user’s sake. For us, thoughtful design means
making appliances easier to use and tasks more enjoyable to perform, freeing
our customers to experience that ultimate 21st century luxury, ease of mind.
Our aim is to make this ease of mind more available to more people in more
parts of their everyday lives, all over the world. So when we say we’re thinking
of you, you know we mean just that.
Contents
• Important safety instructions • Operating conditions
• Included
• Using the remote control • Installation and removal of exhaust hose
• Installation of window kit • Cool mode
• Dehumidification mode
• Fan mode • Ventilation mode
• To change air flow direction
• Turbo cool operation
• Off 1 hr timer
• Timer operation
• Plasmacluster operation
• Manual operation
• Drainage
• Maintenance
• Before calling for service
• Warranty
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Information on disposal for users
• If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.
• This air conditioner uses R410A refrigerant.
© Copyright 2006 Electrolux Home Products Pty Ltd
TINSEA519JBRZ
Print code: EPORTACUMAN
Issue date: Jun 06
user manual
portable air conditioners
(EXP09CS1WI)
Plasmacluster is a trademark of SHARP Corporation
2
5
5
6
7
9
13
13
14
15
15
16
16
17
18
18
19
20
21
22
electrolux EXP09CS1WI front/rear view Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will provide
you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of
quality products that make your life more comfortable. You find some examples on the
cover in this manual. Please take a few minutes to study this manual so that you can take
advantage of the benefits of your new machine. We promise that it will provide a superior
User Experience delivering Ease-of-Mind. Good luck!
important
operating conditions/energy
safety instructions tips/inclusions
electrolux EXP09CS1WI
electrolux EXP09CS1WI
Important safety instructions
This manual explains the proper use of your new air
conditioner. Please read this manual carefully before using
the product. This manual should be kept in a safe place for
handy reference.
warning
warning
• Contact authorised service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young
children or infirmed persons without supervision.
• Young children should be supervised to ensure that they
do not play with the air conditioner.
• There are local council rules regarding maximum
allowable noise levels emitted by air conditioners.
• If the power cord is to be replaced, replacement work
shall be performed by authorised personnel only.
• Installation work must be performed in accordance with
the national wiring standards by authorised personnel only
(if applicable). Incorrect connection can cause overheating
and fire.
• Take care not to catch fingers on fan when adjusting
horizontal louvres.
Important notes
1. Do not operate unit without the air filter.
2. Do not operate unit near any heat source or open fire.
3. Do not expose the unit to direct sunlight.
4. Always store or move the unit in an upright position.
5. Do not cover the appliance when in operation or
immediately after use.
6. Always ensure that when the water pump drain hose is
fitted that the hose is run to an effective drain point.
7. Always drain condensate before storing unit.
To prevent injury to the user or other people and property
damage, the following instructions must be followed.
Incorrect operation due to ignoring instructions may cause
harm or damage.
The seriousness is classified by the following indications:
warning
This symbol indicates the possibility of death or
serious injury
This symbol indicates the possibility of injury or
damage to property
Meanings of symbols used in this manual are shown below:
This symbol indicates never to do this
This symbol indicates always do this
meaning
lug in power plug
P
properly
Otherwise, it may cause
electric shock or fire due to
excess heat generation
o not operate or stop
D
the unit by inserting or
pulling out the power
plug
It may cause electric shock or
fire due to heat generation
o not damage or use an
D
unspecified power cord
It may cause electric shock or
fire
If the power cord is damaged,
it must be replaced by the
manufacturer or an authorised
service centre or a similarly
qualified person in order to
avoid a hazard
o not modify power
D
cord length or share
the outlet with other
appliances
It may cause electric shock or
fire due to heat generation
o not operate with
D
wet hands or in damp
environment
It may cause electric shock
o not direct airflow at
D
room occupants
This could harm your health
lways ensure effective
A
earthing
Incorrect earthing may cause
electric shock
o not allow water to run
D
into electric parts
It may cause failure of unit or
electric shock
lways install circuit
A
breaker and a dedicated
power circuit
Incorrect installation may
cause fire and electric shock
nplug the unit if strange
U
sounds, smell, or smoke
comes from it
It may cause fire and electric
shock
o not use the socket if it
D
is loose or damaged
It may cause fire and electric
shock
o not open the unit
D
during operation
It may cause fire and electric
shock
Keep firearms away
It may cause fire
o not use the power
D
cord close to heating
appliances
It may cause fire and electric
shock
o not use the power
D
cord near flammable gas
or combustibles, such
as gasoline, benzene,
thinner, etc.
It may cause an explosion or
fire
entilate room before
V
operating air conditioner
if there is a gas leakage
from another appliance
It may cause explosion, fire
and burns
o not disassemble or
D
modify unit
It may cause failure and
electric shock
electrolux EXP09CS1WI
electrolux EXP09CS1WI
important safety
front/rear
instructions
view caution
meaning
hen the air filter is to be It may cause an injury
W
removed, do not touch
the metal parts of the unit
caution
meaning
It may cause failure of
appliance or accident
o not clean the air
D
conditioner with water
Water may enter the unit and
degrade the insulation. It may
cause an electric shock
o not place obstacles
D
around air-inlets or inside
of air-outlet
entilate the room well
V
when used together with
a stove, etc.
An oxygen shortage may occur
Operation without filters may
lways insert the filters
A
securely. Clean filter once cause failure
every two weeks
hen the unit is to be
W
cleaned, switch off,
and turn off the circuit
breaker
Do not clean unit when power
is on as it may cause fire and
electric shock, it may cause an
injury
o not use strong
D
detergent such as wax or
thinner – use a soft cloth
o not place a pet or
D
house plant where it will
be exposed to direct air
flow
This could injure the pet or
plant
o not place heavy object There is danger of fire or
D
electric shock
on the power cord and
ensure that the cord is
not compressed
o not use for special
D
purposes
Do not use this air conditioner
to preserve precision devices,
food, pets, plants, and
art objects. It may cause
deterioration of quality, etc.
Do not drink water
It contains contaminants and
could make you sick
Use caution when
Sharp edges could cause
injury
If water enters the
It could cause electric shock
and damage
top operation and close
S
the window in storm or
cyclone
Operation with windows
opened may cause wetting
of indoor and soaking of
household furniture
old the plug by the head
H
of the power plug when
taking it out
It may cause electric shock
and damage
Turn off the main
It may cause failure of product
or fire
power switch when
not using the unit for a
long time
drained from air
conditioner
unpacking and
installing
unit, turn the unit off at
the power outlet and
switch off the circuit
breaker. Isolate supply
by taking the powerplug out and contact
a qualified service
technician
Appearance may be
deteriorated due to change of
product colour or scratching of
its surface
important
operating safety
conditions/energy
instructions tips/inclusions
electrolux EXP09CS1WI
electrolux EXP09CS1WI
Points to keep in mind when using your air conditioner
Usage cautions
• Ventilate the room periodically during use, especially if using
gas appliances in conjunction with the air conditioner.
• Be sure to turn the unit off and disconnect the power supply
cord before performing any maintenance
or cleaning.
Warnings for use
• Do not splash or pour water directly onto the unit.
• Do not modify any part of this product.
Water can cause electrical shock or equipment damage.
• Do not insert anything into any part of the unit.
• Drainage should be performed whenever moving the air
• Ensure the power supply used has an appropriate
conditioner (see page 19). If any water remains in the tank, it
voltage rating. Only use a 220V – 240V, 50Hz,10A
may spill out while being moved.
mains electricity supply. Use of a power supply with an
• To ensure proper drainage, the drainage hose must have
improper voltage rating can result in damage to the unit
no kinks and must not be elevated during dehumidification
and possibly fire.
mode. If not, the drained water may spill out into the room.
• Always use a circuit breaker or fuse with the proper amp • The temperature around the drainage hose must not be
rating.
below freezing point when used. Drained water may freeze
Do not, under any circumstances, use wire, pins or other
inside the hose, causing water inside the unit to overflow
objects in place of a proper fuse.
into the room.
• In the event of any abnormality with the air conditioner
• Do not block the exhaust air outlet with obstacles.
(eg. a burning smell), turn it off immediately and
Cooling performance may be reduced or stop completely.
disconnect the power supply.
• Provide a residual current device (RCD) in order to protect
against electric shock in accordance with British Standard
and Wiring Rules.
• Exposure to direct airflow for an extended period of
time could be hazardous to your health. Do not expose
occupants, pets, or plants to direct airflow for extended
Warning for power supply cord
periods of time.
• This power plug must only be plugged into an
• Do not use this air conditioner for non-specified special
appropriate wall socket. Do not use in conjunction with
purposes (e.g. preserving precision devices, food, pets,
any extension cords.
plants, and art objects). Usage in such a manner could
• Push the power plug securely into the socket and make
harm such property.
sure it is not loose.
• Do not pull, deform, or modify the power supply cord,
Notes on operation
or immerse it in water. Pulling or misuse of the power
• Allow 3 minutes for the compressor to restart cooling.
supply cord can result in damage to the unit and cause
If you turn the air conditioner off and immediately restart it,
electrical shock.
allow three minutes for the compressor to restart cooling.
• If the supply cord is damaged, it must be replaced by
There is an electronic device in the unit that keeps the
the manufacturer or its service agent or a similarly
compressor turned off for three minutes
qualified person in order to avoid a hazard. Use only the
for safety.
manufacturer specified power cord for replacement.
• In the event of a power failure during use, allow 3 minutes
• This appliance must be earthed. This appliance is
before restarting the unit. After power is reinstated, restart
equipped with a cord having an earth wire. The plug
the air conditioner. If the power was off for less than three
must be plugged into an outlet that is properly installed
minutes, be sure to wait at least three minutes before
and earthed.
restarting the unit. If you restart the air conditioner within
three minutes, a protective device in the unit may cause
the compressor to shut off. This protective device will
prevent cooling for about 5 minutes. Any previous settings
will be cancelled and the unit will return to its initial
settings.
• Low temperature operation: Is your unit freezing up?
Freezing may occur when the unit is set close to 18°C in
low ambient temperature conditions, especially at night.
(only for UK)
In these conditions, a further temperature drop may cause
• This appliance is equipped with a cord that has a
the unit to freeze. Setting the unit to a higher temperature
earthed wire connected to an earthed pin. The plug
will prevent it from freezing.
must be plugged into a socket that is properly installed
• Dehumidification mode increases room temperature.
and earthed. Do not under any circumstances cut or
The unit generates heat during dehumidification mode
remove the square earthed pin from this plug.
and the room temperature will rise. Warm air will be blown
out from the Exhaust air outlet, but this is normal and
square earthed pin
does not indicate a problem with the unit.
• This air conditioner blows the warm air generated by the
unit outside the room via the exhaust hose while in cool
mode. Accordingly, the same amount of air as that blown
out will enter the room from outside through any openings
into the room.
electrolux EXP09CS1WI
electrolux EXP09CS1WI
operating conditions/included
front/rear view Operating conditions
Included
Exhaust hose (1)
• The air conditioner must be operated within the
temperature range indicated in the table below.
• Available for operation at condition of supply voltage
220V to 240V at 50Hz.
• A built-in safety device may cut off operation if the
temperature exceeds these limits.
• When cooling operation is performed at high room
temperature, the fan may run slightly slower.
Mode
Cool
Dehumidification
Room temperature
upper limit
lower limit
lower limit
Window exhaust adapter (1)
Remote control (1)
Insect guard net (1)
35°C
18°C
15°C
Energy efficiency tips
• Avoid direct sunlight
Close blinds, drapes or shades to keep out direct
sunlight while in cooling mode.
• Keep the filter clean
Keeping the filter clean greatly aids efficient operation.
A dirty filter blocks the flow of air, making your air
conditioner work harder and less efficiently.
See page 15 on how to clean the filter.
• Turn off unnecessary lights
Your air conditioner must remove the heat produced by
your lights or other heat-producing appliances. Turn off
any lights or appliances that are not in use.
• Turn off the air conditioner when no one is home
Use only when necessary. The less time the air
conditioner is used, the lower the running costs.
Location
• The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For safe and
secure positioning, place the unit on a smooth, level
floor strong enough to support the unit.
• The unit has casters to aid placement, but it should only
be rolled on smooth, flat surfaces. Use caution when
rolling on carpet surfaces. Do not attempt to roll the unit
over objects.
• The unit must be placed within reach of a properly rated
earthed socket.
• Never place any obstacles around the air inlet or outlet
of the unit.
• Allow at least 30 cm of space on either side from the
wall for efficient air-conditioning.
Battery (2)
(AAA.1.5V)
Hose clamp (1)
Suction disk (1)
Manual (1)
Included only together with “window kit”
Extension panel (1)
Foam seal (1)
Bracket (1)
Rain guard (2)
Foam seal (3)
(adhesive type) A
Foam seal (1)
(adhesive type) B
Rain guard (2)
Hose
clamp
(1)
Screw (8)
Exhaust cover (1)
Manual (1)
������� ��
������� ��
Adjustment panel (1)
Window panel (1)
Suggested tools for window kit installation
1. Screwdriver (medium size Phillips)
2. Tape measure or ruler
3. Knife or scissors
4. Saw (in the event that the window panel needs to be
cut down in size because the window is too narrow for
direct installation)
using
operating
the remote
conditions/energy
control electrolux
tips/inclusions
EXP09CS1WI
electrolux EXP09CS1WI
Using the remote control
How to use the remote control
Loading the batteries (use two AAA 1.5V) alkaline
batteries
1. Remove the battery cover at the back of the
remote control.
2. Insert batteries into the compartment, making sure
the
and
polarities are correctly aligned, as shown.
• Lines will appear on the display when batteries are
properly installed.
3. Reattach the battery cover.
4. Press the RESET button using a thin pointed implement.
Point the remote control towards the units signal receiver
window and press the desired button. A beep will sound
when the unit receives the signal.
• Make sure nothing, such as curtains, block the signal
receiver window.
• The remote control operates up to 7 meters away.
Battery
Battery cover
cover
Lines
Lines
Pointed
Pointed implement
implement
NOTES:
• Batteries should last approximately one year under
normal use.
• When replacing the batteries, always change both
batteries at the same time, and make sure they are the
same type.
• If the remote control does not operate normally after
replacing the batteries, press the RESET button using a
thin pointed implement.
• If you will not be using the unit for a prolonged period,
remove the batteries from the remote control.
• Do not use rechargeable batteries.
• Do not expose the signal receiver window to direct
sunlight. This may adversely affect its operation. If
necessary, close curtains to block out the sunlight.
• Use of a fluorescent lamp in the same room may interfere
with transmission of the signal.
• The unit may be affected by signals emitted from
other remote controllers for televisions, VCRs or other
equipment used in the same room.
• Do not leave the remote control exposed to direct sunlight
or near a heater. Protect the remote control from moisture
and shock which can discolour or damage it.
To prevent the remote control from being misplaced, hook it
������ ������� ����
to the unit when not in use.
When attached, to remove the remote control from the unit,
lift the remote control up slightly and pull it out from the
remote control hook.
Remote
������ control
�������hook
����
electrolux EXP09CS1WIelectrolux
installationEXP09CS1WI
and removal offront/rear
exhaust hose
view Installation and removal of exhaust hose
Installation without “window kit”
The exhaust hose must be installed or removed in
accordance with the usage mode.
Mode
Cool, fan, ventilation
Dehumidification
Exhaust hose
Install
Remove
The exhaust hose should be as short as possible for
operational efficiency; however, it must not be twisted or
bent.
Unacceptable
Installation of the exhaust hose
1. Attach the insect guard net to the exhaust adapter.
Push the insect guard net firmly to ensure that four
projections on the exhaust adapter fit into the four holes
on it.
Projection
Hole
Exhaust adapter
Exhaust hose
Extend
Acceptable
Insent
guard net
2. Attach the Exhaust adapter to the exhaust hose.
Extend one end of the exhaust hose and insert it into the
Exhaust adapter, and turn it (approx. three times) until it
stops.
Make sure they are securely attached afterwards.
Acceptable
Projection
Hole
3. Attach the exhaust hose adapter to the unit.
Insert the two projections on the exhaust hose adapter
into the two holes on the unit, and firmly attach them to
each other.
Removal of the exhaust hose
1. Remove the exhaust hose adapter from the unit.
Lift up and remove the exhaust hose adapter from the
unit by pushing down on the two projections.
Suction
disk
Projection
installation
operating conditions/energy
and removal of exhaust
tips/inclusions
hose electrolux
electrolux
EXP09CS1WI
EXP09CS1WI
Installation and removal of exhaust hose
Installation only together with “window kit”
The exhaust hose must be installed or removed in
accordance with the usage mode indicated in the
table below
Mode
Cool, fan, ventilation
Dehumidification
The exhaust hose should be as short as possible for operational efficiency; however, it must not be twisted or bent.
Unacceptable
Exhaust hose
Install
Remove
Installation of the exhaust hose
1. Attach the window exhaust adapter to the exhaust hose
• Extend one end of the exhaust hose and insert it into
the window exhaust adapter, and turn it (approx. three
times) until it stops.
• Make sure they are securely attached.
Acceptable
Window
exhaust
adapter
Extend
Acceptable
Exhaust hose
2. Attach the exhaust hose couple to the unit
• Insert the two projections on the exhaust hose couple
into the two holes on the unit, and firmly attach them
to each other.
Exhaust hose
couple
Projection
Removal of the exhaust hose
1. Remove the window exhaust adapter.
• Pull out and remove the window exhaust adapter by
pushing down the two “PUSH” markings, and slide
and close the exhaust cover in the window panel.
Hole
“PUSH”
3. Slide and open the exhaust cover on the window panel,
and attach the window exhaust adapter
• Surface of window exhaust adapter marked
“TOP” should be at the top when it is installed in a
doublehung sash window.
• Surface of window exhaust adapter marked “TOP”
should be on the window frame side when it is
installed in a sliding sash window.
“TOP”
2. Remove the exhaust hose couple from the unit.
• Lift up and remove the exhaust hose couple from the
unit by pushing down on the two projections.
Exhaust hose couple
Projection
electroluxelectrolux
EXP09CS1WI
EXP09CS1WI
installationfront/rear
of window
view
kit Installation of window kit
Window kit is not supplied to all markets
Installation in a double-hung sash window
1. Connect the rain guards to the insect guard net.
• Insert all three projections on each rain guard into the
holes in the insect guard net.
• Side “A” will now be uppermost, as indicated in the
diagram.
3. Cut the foam seal A (adhesive type) to the proper length
and attach it to the window sill
Hole
Foam seal A
(adhesive type)
Insect guard
net
“A”
Projection
4. Attach the window panel to the window sill
2. Attach the guard combined above to the window panel
• Push the insect guard net firmly to ensure that its
fourprojections fit into the holes in the window panel.
• Side “A” will now be at the top, as indicated in
thediagram.
Projection
Window panel
“A”
(A) If the inner width of the window is between 559mm and
609mm inclusive:
The window panel cannot be installed in windows less
than 559mm wide, as you will be unable to shut the
exhaust cover.
In such cases the exhaust cover will have to be removed
prior to installing the window panel.
• Remove the adjustment panel from the window panel,
and cut the window panel to the same width as the
window
• Open the window sash and place the window panel
on the window sill
• Secure the window panel to the window stool with 2
screws
Exhaust cover
Window
panel
Cut
Adjustment panel
Window panel
559mm - 609mm
Window sill
10 installation
operating conditions/energy
of window kit electrolux
tips/inclusions
EXP09CS1WI
electrolux EXP09CS1WI
Installation in a double-hung sash window (cont.)
(B) If the inner width of the window is between 609mm and
934mm inclusive:
• Open the window sash and place the window panel
on the window stool.
• Slide the adjustment panel to fit the window frame
width.
• Secure the window panel to the sill with 3 screws.
5. Cut the foam seals A and B (adhesive type) to the proper
length and attach it to the window panel
• Attach foam seal A to the window panel and extension
panel, and attach foam seal B to the adjustment panel.
Foam seal A
(adhesive type)
Adjustment panel
Foam seal B
(adhesive type)
609mm - 934mm
6. Close the window sash securely against the window
panel
(C) If the inner width of the window is between 934mm and
1219mm inclusive:
• Attach the extension panel to the adjustment panel. • Open the window sash and place the window panel
on the window stool.
• Slide the adjustment and extension panels to fit the
window frame width.
• Secure the window panel to the window stool with 4
screws.
7. Cut the foam seal to an appropriate length and seal the
opening between the top of the inner window sash and
the outer window sash
Extension panel
Foam seal
934mm - 1219mm
8. Attach a bracket with the screw
Bracket
electrolux
electrolux
EXP09CS1WI
EXP09CS1WI
installationfront/rear
of window
view
kit 11
Installation in a sliding sash window
1. Connect the rain guards to the insect guard net
• Insert all three projections on each rain guard into the
holes in the insect guard net.
• Side “A” will now be uppermost, as indicated in the
diagram.
3. Cut the foam seal A (adhesive type) to the proper length
and attach it to the window frame
Foam seal A
(adhesive type)
“A”
Insect guard net
Hole
Rain guard
Projection
4. Install the window panel into the window frame
2. Attach the guard combined with insect guard net to the
window panel
• Push the insect guard net firmly to ensure that its four
projections fit into the holes in the window panel.
• Side “A” will now be at the top, as indicated in the
diagram, when it is installed in the window.
Window
panel
“A”
Projection
(A) If the inner height of the window is between 559mm and
609mm inclusive:
The window panel cannot be installed in windows less
than 559mm high, as you will be unable to shut the
exhaust cover.
In such cases the exhaust cover will have to be removed
prior to installing the window panel.
• Remove the adjustment panel from the window panel,
and cut the window panel to the same height as the
window.
• Open the window sash and place the window panel
on the window frame.
• Secure the window panel to the window frame with 2
screws.
Exhaust cover
Window
panel
Cut
Adjustment panel
Window
panel
559mm - 609mm
12 installation
operating conditions/energy
of window kit electrolux
tips/inclusions
EXP09CS1WI
electrolux EXP09CS1WI
Installation in a sliding sash window (cont.)
(B) If the inner width of the window is between 609mm and
934mm inclusive:
• Open the window sash and place the window panel
on the window stool.
• Slide the adjustment panel to fit the window frame
width.
• Secure the window panel to the sill with 3 screws.
5. Cut the foam seals A and B (adhesive type) to the proper
length and attach it to the window panel
• Attach foam seal A to the window panel and extension
panel, and attach foam seal B to the adjustment panel.
Foam seal B
(adhesive type)
Adjustment
panel
609mm - 934mm
Foam seal A
(adhesive type)
C) If the inner width of the window is between 609mm and
934mm inclusive:
• Attach the extension panel to the adjustment panel.
• Open the window sash and place the window panel
on the window stool.
• Slide the adjustment and extension panels to fit the
window frame width.
• Secure the window panel to the window stool with 4
screws.
6. Close the window sash securely against the window
panel
Extension panel
7. Cut the foam seal to an appropriate length and seal the
opening between the top of the inner window sash and
the outer window sash
934mm - 1219mm
Foam seal
8. Attach a bracket with the screw
Bracket
electrolux EXP09CS1WI installation of window kit 13
Cool mode
Dehumidification mode
Install the exhaust hose (see page 7-8, turn the drainage
nozzleDrainage
to the CLOSE
position, and check the drainage
nozzle
nozzle is covered with the stopcock.
“CLOSE position”
Drainage
nozzle
Stopcock
(Upper)
In this mode, the air conditioner dehumidifies the room
“CLOSE position”
Stopcock (Upper)
Drainage nozzle
1. Remove the exhaust hose (see page 7-8).
2. Turn the drainage nozzle to the OPEN position.
Drainage nozzle
“CLOSE position”
Stopcock (Upper)
Stopcock (Upper)
“OPEN position”
1. Press the MODE
button
to selectFAN
COOL mode.
DEHUM
VENT
COOL
3. Pull the stopcock (upper) out from the drainage nozzle.
• When the stopcock (upper) is Drainage
removed, anozzle
small amount
of water may be dischargedHose
from the
drainage nozzle.
clamp
(Upper)
lways perform this procedureStopcock
with the unit
turned
VENT
COOL DEHUM FAN • A
off. Drain water will squirt out if attempted during
2. Press the ON/OFF button to start operation.
operation.
• The red OPERATION lamp on the unit will illuminate.
4. Insert the hose clamp into a standard commerciallyMake sure they are securely attached.
available hose (12.7mm
inner diameter, 16.7mm outer
Drain hose
“OPEN position”
3.Press the TEMPERATURE button to set the desired
diameter).
VENT
COOL DEHUM FAN
temperature.
COOL DEHUM
COOL DEHUM
FAN
FAN
VENT
VENT
• The temperature can be set within the range of
18°C to 32°C.
2
Hose clamp
3
Drainage nozzle
COOL DEHUM
FAN
Stopcock (Upper)
VENT
Drain hose
1
4 FAN button to set the desired fan speed.
4. Press the
AUTO
QUIET
LOW
DEHUM FAN
COOL QUIET
AUTO
LOW
HIGH
VENT
HIGH
AUTO
QUIET
LOW
To turn off
Press the ON/OFF button again.
• The red OPERATION lamp on the unit will turn off.
NOTES:
• To minimise noise it is recommended that during cooling
mode the drainage nozzle should remain in the CLOSE
position.
• To prevent water saturation ensure that stopcocks are
always fitted when not using separate drainage.
COOL D
5. Attach the hose to the
drainage
nozzle,
and
secure
it
“OPEN position”7
with the hose clamp.
• Depending on room condition, approximately 28
litres of water per day (24 hours) will be dehumidified.
Prepare some kind of bucket of appropriate size to
collect drain water, or take some
appropriate
Hose
clamp measure
6 so that drain
to drain the water outside of the room,
HIGH
water will not overflow or soak your room.
• Set the hose sloping downwards for easier drainage.
Moreover, do not bend the hose at any point, nor allow COOL
the end to be submerged
in water.
Drain hose
7
6
7
6
COOL
14 dehumidification/fan
mode electrolux
EXP09CS1WI
FANposition”
VENT
COOL DEHUM
“OPEN
Dehumidification mode (cont.)
Fan mode
Hose clamp
6.Press the MODE button to select DEHUMIDIFICATION
mode.
DEHUM
FANsimply
VENT
COOL
In this mode,
the air
conditioner
circulates the
air without cooling it
Turn the drainage nozzle to the CLOSE position, and check
the drainage nozzle is covered with the stopcock.
COOL DEHUM FAN
VENT
1. Press the MODE button to select FAN mode.
Drain hose
7.
Press the ON/OFF button to start operation.
• The red OPERATION lamp on the unit will illuminate.
• The temperature cannot be set.
• The fan speed is preset to AUTO and cannot be
VENT
COOL DEHUM FAN
changed.
COOL DEHUM
FAN
VENT7
COOL DEHUM
2.
3.
FAN
VENT
Press the ON/OFF button to start operation.
• The red OPERATION lamp on the unit will illuminate.
• The temperature cannot be set.
Press the FAN button to set the desired fan speed.
VENT
COOL DEHUM FAN
COOL
DEHUM
FAN
VENT
2
6
To turn off
Press the ON/OFF button again.
• The red OPERATION lamp on the unit will turn off.
1
3
To turn off
Press the ON/OFF button again.
• The red OPERATION lamp on the unit will turn off.
The unit generates heat during dehumidification mode and
the room temperature will rise. Install the exhaust hose if
you do not want the room temperature to rise. This will help
to slightly drop the room temperature, but dehumidification
performance will become less effective than when operating
without the exhaust hose.
2
1
3
COOL DEHUM FAN
VENT
electrolux EXP09CS1WI ventilation mode/air flow direction 15
Ventilation mode
To change air flow direction
In this mode, the air conditioner ventilates the2air
to outdoors COOL DEHUM FAN
VENT
Install the exhaust hose (See Page 7-8), turn the drainage
nozzle to the CLOSE position, and check the drainage
nozzle is covered with the stopcock (upper).
1
1. Press the MODE button to select VENT mode.
3
COOL DEHUM
2.
3.
FAN
VENT
Press the ON/OFF button to start operation.
• The red OPERATION lamp on the unit will illuminate.
• The temperature cannot be set.
Press the FAN button to set the desired fan speed.
• Although the louvres are closed and no air blows
out into the room, the external ventilation fan speed
changes.
QUIET
LOW
Up/down air flow direction
1. Press the ON/OFF button to start operation.
• The red OPERATION lamp on the unit will illuminate.
2. Press the SWING button on�the remote control.
• The horizontal louvres will swing continuously.
3.Press the SWING button again when the horizontal
louvres are at the desired position.
• The horizontal louvres will�stop moving.
• The adjusted position will be memorized and the same
�
position will be set automatically
when operated the
next time.
�
�
�
�
�
�
�
�
�
HIGH
NOTE
• During VENTILATION mode, UP/DOWN
air flow
direction
����������
�������
cannot be changed.
���������� �������
2
���������� �����
1
3
Left/right air flow direction
Hold the vertical louvre as shown in the diagram below and
adjust the air flow direction.
�������� �������
To turn off
Press the ON/OFF button again.
• The red OPERATION lamp on the unit will turn off.
�
�������� �������
�������� �������
Never attempt to adjust the horizontal louvres manually.
• Manual adjustment of the horizontal louvres can cause
the unit to malfunction when the remote control is used
for adjustment.
• When the horizontal louvres are positioned at the lowest position in the COOL or DEHUMIDIFICATION
mode for an extended period of time, condensation may result.
Do not adjust the vertical louvres to the extreme left or right
in the COOL mode with the fan speed set to “QUIET (
)”
for an extended period of time.
Condensation may form on the louvres.
16 turbo cool operation/off timer electrolux EXP09CS1WI
Turbo cool operation
Off 1 hr timer
In this operation, the air conditioner fan works at
extra high speed with a setting temperature of 15°C
1. Press the TURBO cool button during cooling mode.
• The remote control will display “
”.
• The temperature display will go off.
When the OFF 1 HR TIMER is set, the unit will
automatically turn off after one hour
1. Press the OFF 1HR button.
• The remote control displays “
”.
• The orange TIMER lamp on the unit will illuminate.
• The unit will stop operating after one hour.
1
1
To cancel
Press the TURBO cool button again.
• TURBO cool operation is also cancelled when the mode is
changed, or when the unit is turned off.
NOTES:
• You cannot set the temperature or fan speed during
TURBO cool operation.
• The fan returns to the HIGH speed setting after the unit
has run for 30 minutes in TURBO cool mode.
• The extra high fan speed may automatically slow down
to protect the unit.
1
CANCEL
1
CANCEL
1
CANCEL
To cancel
Press the CANCEL button.
• The orange TIMER lamp on the unit will turn off.
Alternatively, turn the unit off by pressing the ON/ OFF
button.
• The red OPERATION lamp and the orange TIMER lamp
on the unit will turn off.
NOTES:
• The OFF 1 HR TIMER operation has priority over TIMER
ON and TIMER OFF operations.
• If the OFF 1 HR TIMER is set while the unit is not
operating, the unit will operate for an hour at the formerly
set condition before turning off.
• If you wish to operate the unit for another hour before the
OFF 1 HR TIMER is activated, press the OFF 1 HR TIMER
button again during operation.
1
electrolux EXP09CS1WI timer operation 17
Timer operation
Timer off
The unit will turn off automatically according to your setting.
Timer duration can be set from a minimum of half an hour
(30 minutes) to a maximum of 12 hours.
Up to 10 hours, you can set in half-hour (30-minute) increments
and from 10 to 12 hours, you can set in 1-hour increments.
Point the remote control at the signal receiver window on the unit.
1.Press the TIMER OFF (
) button and set the time
as desired.
• The time setting will change as you press the button
as follows.
0.5h 1.0h 1.5h
10h
11h 12h
Hold the button down to speed through the settings.
• The orange TIMER lamp on the unit will illuminate.
• The unit will emit a beep when it receives the signal.
• Once set, the time setting will countdown and show
the remaining time.
1
0.5h
1.0h
1.5h
10h
11h
12h
Timer on
The unit will turn on automatically according to your setting.
Timer duration can be set from a minimum of half an hour
(30 minutes) to a maximum of 12 hours.
Up to 10 hours, you can set in half-hour (30-minute)
increments and from 10 to 12 hours, you can set in 1-hour
increments.
Point the remote control at the signal receiver window on
the unit.
1. Press the TIMER ON (
) button and set the time as
desired.
• The time setting will change as you press the button
as follows.
0.5h 1.0h 1.5h
10h
11h 12h
Hold the button down to speed through the settings.
• The orange TIMER lamp on the unit will illuminate.
• The unit will emit a beep when it receives the signal.
• Once set the time setting will countdown and show the
remaining time.
Select the mode, temperature, fan speed setting and
PLASMACLUSTER operation as desired.
• When the temperature is set with the TIMER ON, the
temperature will show in the display for 5 seconds and
then return to the countdown display.
• If you do not change the setting, the unit will operate
0.5husing
1.0hthe most
1.5h recent
10h setting.
11h 12h
1
1
0.5h
1.0h
1.5h
10h
11h
12h
Display shows the unit set to turn off in 2.5 hours.
To cancel
Press the CANCEL button.
• The orange TIMER lamp on the unit will turn off.
1
1
Display shows the unit set to turn on in 6.5 hours.
NOTES ON TIMER SETTING AND OPERATION
• The last time setting will be memorized and will appear
on the remote control display the next time you set the
TIMER OFF or TIMER ON.
• The TIMER OFF and TIMER ON can not be set
simultaneously.
Only the most recent TIMER setting will be valid.
• When the OFF 1 HR TIMER is set, the TIMER OFF and
TIMER ON settings are unavailable.
• If the OFF 1 HR TIMER is set while the TIMER OFF or
TIMER ON is activated, the TIMER ON or TIMER OFF
setting will be cancelled.
• If a power failure occurs while the TIMER OFF or TIMER
ON is set, the TIMER setting will be cancelled and will
not be retrieved even after the power is restored.
To cancel
Press the CANCEL button.
• The orange TIMER lamp on the unit will turn off.
18 plasmacluster/manual operation electrolux EXP09CS1WI
Plasmacluster operation
Manual operation
The Plasmacluster ion generator inside the air conditioner
will release positive and negative Plasmacluster ions into
the room. Approximately the same numbers of positive
and negative ions released into the air will reduce some
airborne mould, allergens and viruses.
Use this mode when the remote control is not available
1. Press the MANUAL button on the unit.
• The red OPERATION lamp on the unit will illuminate.
• If the unit has not been unplugged since its last
operation it will resume operation at its last settings.
• If the unit has been unplugged since its last operation,
it resumes operation in the cooling mode, set at 20°C
with the fan speed set to AUTO.
1. Press the PLASMACLUSTER button during operation.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp on the unit will
illuminate.
�
�
To turn off
Press the MANUAL button again.
• The red OPERATION lamp on the unit will turn off.
To cancel
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn off.
NOTES:
• Use of the PLASMACLUSTER function will be memorised
and it will be activated the next time you turn on the air
conditioner.
• To turn off the PLASMACLUSTER lamp, press the
DISPLAY button.
• PLASMACLUSTER operation cannot be set during
VENTILATION mode.
�
NOTES:
• If the MANUAL button is pressed during normal operation, the
unit will turn off.
• Upon starting MANUAL operation, the drainage pump inside the
unit runs for about a minute, which may produce an audible
gurgling sound.
electrolux EXP09CS1WI drainage 19
Drain hose
Drainage
Prepare for drainage and drain out water within the unit in
the following cases
If the unit stops operating and the TIMER and OPERATION
lamps and are blinking, this indicates that the water tank
inside the unit is full.
1. Make sure to turn the unit off.
2. Turn the drainage nozzle to the OPEN position.
Drainage
nozzle
Stopcock (Upper)
“OPEN position”
3. Pull the stopcock (upper) out from the drainage nozzle.
• When the stopcock (upper) is removed, a small
Drainage
amount of water may be discharged
from the drainage
nozzle
Hose clamp
nozzle.
4. Insert the hose clamp onto theStopcock
drain hose.
(Upper)
5. Attach the drain hose to the drainage nozzle, and secure
it with the hose clamp.
• Prepare for draining, as drain water will come out
through the drain hose
during
hoseoperation.
“OPENDrain
position”
Hose clamp
Drain hose
6. Press the MANUAL button on the unit twice.
• The water will drain out through the drain hose.
Maximum amount of water that may be drained out is
approximately 2 litres.
• The OPERATION and TIMER cool lamps will be
blinking.
7.When drainage water stops running out from the drain
hose, turn the unit off by pressing MANUAL button.
• This should take about one minute to complete.
8.Remove the drain hose from the drainage nozzle, and
replace the stopcock (upper).
• Keep the hose clamp for future use.
9. Turn the drainage nozzle to the CLOSE position.
Stopcock
Receptacle
(not supplied)
Drainpipe nozzle
Stopcock
Whenever the unit is moved (to prevent water within
the unit from spilling).
When the unit is not going to be used for a long time
1. Carry out the previous procedures from 1 to 5.
2. Press the MANUAL button on the unit.
• The water will drain out through the drain hose.
Maximum amount of water that may be drained out is
approximately 2 litres.
• The OPERATION lamps will illuminate.
3.When drainage water stops running out from the drain
hose, turn the unit off by pressing the MANUAL button.
• This should take about one minute to complete.
4.Remove the drain hose from the drainage nozzle, and
replace the stopcock (upper).
• Keep the hose clamp for future use.
5. Turn the drainage nozzle to the CLOSE position.
6.Remove the stopcock (lower) from the drainpipe nozzle,
and completely drain any water within the unit.
• Always prepare a receptacle to collect the water
before draining. Maximum amount of water that may
be drained out is approximately 0.2 litres.
7. Replace the stopcock (lower) to the drainpipe nozzle.
Stopcock
Receptacle
(not supplied)
Drainpipe nozzle
20 maintenance electrolux EXP09CS1WI
Maintenance
Be sure to switch off and disconnect the power from the
wall socket before performing any maintenance.
Cleaning the filters
If the filter is clogged with dust, the airflow will be reduced,
resulting in poor cooling performance.
The filter should be cleaned every two weeks.
1. Remove the filters
• Gently pull the filter handle to the right and slide the
filter out of the unit.
2. Clean the filters
• Use a vacuum cleaner to remove any dust. If the filters
are very dirty, wash them with detergent and rinse
carefully with clean luke warm water. Dry the filters in
the shade before reinstalling them.
3. Reinstall the filters
• Hold the filter handle and gently push the filter back
into place. Never operate the unit without the filter.
Doing so may result in serious damage to the unit.
����
Cleaning the unit and the remote control
Wipe with a soft, dry cloth or with a cloth moistened with
a mild soap. Carefully remove any residue by wiping with
a damp cloth and dry completely. Avoid splashing water
onto the unit. Water can dangerously damage the electrical
insulation. Never use harsh chemicals or abrasive cleaners
on any part of the unit. To avoid damaging the unit, do not
use hot water (not greater than 50°C) when cleaning.
Cleaning the insect guard net
The cooling performance may be reduced or stop
completely if the insect guard net becomes clogged with
dust.
Clean the insect guard net with a vacuum cleaner or
suchlike.
�����
Vacuum
�����������
Insect guard net
Maintenance after air conditioner season
1. Perform drainage to drain out water within the unit. (See
page 19 “When the unit is not used for a long time”).
2. Operate the unit in FAN or VENTILATION mode for about
half a day to thoroughly dry inside the unit.
3. Clean the filters, then reinstall them.
• Ensure that the unit is switched off and power supply is
disconnected to the unit prior to cleaning.
������ ����� ���
electrolux EXP09CS1WI before calling for service 21
Before calling for service
If the unit appears to be malfunctioning, check the following
points before calling for service.
Air conditioner does not operate at all
• Is the unit plugged in or is the plug loose?
• Has the fuse blown or has the circuit breaker tripped?
• Did you restart the unit within 3 minutes of a power
failure? If the power was off for less than 3 minutes when,
you restarted the air conditioner, a protective device may
cause the compressor to shut off, preventing cooling for
about 5 minutes.
• Are the OPERATION and TIMER lamps on the unit
blinking?
If so, the water tank inside the unit is full. It must be
drained. (See page 19)
Air conditioner does not cool properly
• Is the unit set to FAN, DEHUMIDIFICATION or VENTILATION
mode? Cooling does not take place in these modes.
Change the MODE setting.
• Are the filters clogged with dust?
Clean and refit the filters.
• Is the cooling coil frozen?
No air will blow out if the cooling coil is frozen.
Run the air conditioner in FAN mode with the fan speed
set to “HIGH” until all ice dissipates.
• Is the temperature set properly?
• Is the room exposed to direct sunlight?
Close the curtains or blinds to minimize solar energy heating the room.
• Is the exhaust hose too long?
For efficient operation, make the hose as short as
possible. The exhaust hose must not be twisted.
Sounds
• The unit may seem rather loud for the first 2 to 3 minutes
when turned on. This is the sound of the compressor
starting-up and is perfectly normal.
• A soft, swishing noise can be heard immediately after the
unit is turned on or off, and also during operation. This is
the sound of the refrigerant flowing inside the unit.
• A low buzzing noise is emitted when the unit is generating
Plasmacluster ions.
• This air conditioner evaporates water condensed during
cooling operation within the unit through the exhaust air
outlet. Although a water flowing sound may be heard, this
is normal.
• An audible gurgling sound may be heard for about a
minute upon starting MANUAL mode. This is the sound
of the drainage pump operating inside the unit.
• An audible gurgling sound may be heard when the unit is
operated on a gently sloping floor.
Place the unit on a level floor.
Timer does not work properly
• If a power failure occurs while the TIMER is set, the TIMER
setting will be cancelled and will not be retrieved even after
the power is restored. This is normal for this unit.
The unit fails to react to the remote control signal
• Check the batteries in the remote control.
Replace if necessary.
• Try to send the signal again with the remote control
pointed directly at the unit’s signal receiver window.
• Check whether the remote control batteries are
installed with the polarities properly orientated.
The discharged air has an odour
• This is the smell of ozone generated from the
Plasmacluster Ion generator. The ozone concentration
is very small, posing no adverse effect to your health.
The ozone discharged into the air rapidly decomposes,
and its density in the room will not increase beyond
acceptable levels .
22 warranty 22 electrolux EXP09CS1WI
Guarantee/Customer Service
Standard guarantee conditions
We, Electrolux, undertake that if within 12 months of the date
of the purchase this Electrolux appliance or any part thereof is
proved to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the same FREE
OF CHARGE for labour, materials or carriage on condition that:
• The appliance has been correctly installed and used only on the
electricity supply stated on the rating plate.
• The appliance has been used for normal domestic purposes
only, and in accordance with the manufacturer’s instructions.
• The appliance has not been serviced, maintained, repaired,
taken apart or tampered with by any person not authorised by
us.
• Electrolux Service Force Centre must undertake all service work
under this guarantee
• Any appliance or defective part replaced shall become the
Company’s property.
• This guarantee is in addition to your statutory and other legal
rights.
Exclusions
• Damage or calls resulting from transportation, improper use or
neglect, the replacement of any light bulbs or removable parts of
glass or plastic.
• Costs incurred for calls to put right an appliance which is
improperly installed or calls to appliances outside the United
Kingdom.
• Appliances found to be in use within a commercial environment,
plus those which are subject to rental agreements.
• Products of Electrolux manufacturer that are not marketed by
Electrolux
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to
purchase spare parts, please contact your local Service Force
Centre by telephoning
0870 5 929 929
Your telephone call will be automatically routed to the Service
Force Centre covering your postcode area.
For the address of your local Service Force Centre and further
information about Service Force, please visit the website at
www.serviceforce.co.uk
Before calling out an engineer, please ensure you have read
the details under the heading “Something not working” When
you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and postcode.
2. Your telephone number.
3. Clear concise details of the fault.
4. The model and Serial number of the appliance (found on the
rating plate).
5. The purchase date.
Please note a valid purchase receipt or guarantee documentation
is required for in guarantee service calls.
Customer Care
For general enquiries concerning your Electrolux appliance, or
for further information on Electrolux products please contact our
Customer Care Department by letter or telephone at the address
below or visit our website at www.electrolux.co.uk
Customer Care Department
Electrolux Major Appliances
Addington Way
Luton
Bedfordshire, LU4 9QQ
Tel: 08705 950 950 (*)
(*) Calls may be recorded for training
purposes
European Guarantee
This appliance is guaranteed by Electrolux in each of the countries
listed at the back of this user manual, for the period specified in
the appliance guarantee or otherwise by law. If you move from
one of these countries to another of the countries listed below the
appliance guarantee will move with
• The appliance guarantee starts from the date you first purchased
the appliance which will be evidenced by production of a valid
purchase document issued by the seller of the appliance.
• The appliance guarantee is for the same period and to the same
extent for labour and parts as exists in your new country of
residence for this particular model or range of appliances.
• The appliance guarantee is personal to the original purchaser of
the appliance and cannot be transferred to another user.
• The appliance is installed and used in accordance with
instructions issued by Electrolux and is only used within the
home, i.e. is not used for commercial purposes.
• The appliance is installed in accordance with all relevant
regulations in force
The provisions of this European Guarantee do not affect any of the
rights granted to you by law.
electrolux EXP09CS1WI front/rear view 23
24 operating conditions/energy tips/inclusions electrolux EXP09CS1WI
Download PDF

advertising