Eltax Cinema DVD Home Theatre System Vision DVD Home Theatre System DVD Player User Manual

Instruction Manual
Cinema DVD Home Theatre System
Vision DVD Home Theatre System
PRECAUTIONS
A lightning bolt with an arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
PROTECT YOURSELF!
Record the model and serial numbers for this
unit while it is easy to see them. These numbers
are located on the back of the unit's cabinet.
Retain this information for future reference.
Model No.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO AVOID THE DANGER OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. NEVER
OPEN THE CABINET, AS DANGEROUS HIGH
VOLTAGES ARE CONTAINED INSIDE. ONLY
A QUALIFIED SERVICE TECHNICIAN SHOULD
ATTEMPT TO OPEN THE CABINET.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, AND FULLY INSERT INTO ELECTRICAL
SOCKET.
CAUTION: This DVD receiver unit employs
a laser system. To prevent direct exposure to
the laser beam, do not open the enclosure.
Visible laser radiation is present when enclosure is open. DO NOT STARE INTO BEAM.
Additionally, the use of controls or adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To ensure proper use of this product, please
read this owner's manual carefully and retain
for future reference. Should the unit require
maintenance, contact an authorized service
location, or contact .
Cinema
Vision
Serial No. _________________________
Retain this information for future reference.
WARNING
RISK OF ELECTRICSHOCK
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). THERE IS NO USER SERVICE
ABLE PART INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1
IMPORTANT-SAFETY INFORMATION
2
CAUTION: Is it important that you read and follow all of
the instructions in this booklet and any marked on the
unit itself. Retain this booklet for future reference.
Accessories--- Never place this product on an unstable
platform, stand, cart, wall mount, shelf, or
table. The product may fall, causing serious personal
injury to persons and pets, as well as seriously
damaging the product. Use only with a stable platform,
stand, cart, wall mount, shelf, or table that has been
recommended by or sold with the product .
Any mounting of the product should follow the
manufacturer's instructions, and use a mounting
accessory recommended by the manufacturer.
This unit while positioned on some type of cart must
be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and
cart combination to overturn.
Attachments---Use only attachment srecommended by , as they may cause hazards.
Cleaning--- Always unplug this unit from the wall
electrical outlet before cleaning. Do not use liquid or
aerosol cleaners; use a damp cloth for cleaning.
Lightning--- For added product protection during
a lightning storm or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and/or disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power-line surges.
Object and Liquid Entry--- Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on or into the product.
Outdoor Antenna Grounding--- If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide protection against voltage surges and
built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size or grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
Overloading---Do not overload wall outlets, extension cords, or integral convenience receptacles, as
this may result in a fire or electric shock.
Power - Cord Protection - Power - supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the product.
Power Lines---An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
Power Sources---This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For products intended to
operate from battery power or other sources, refer to
the operating instructions. This DVD home theater
operates on 230V AC/50Hz. Do not turn off unit
immediately after turning on; wait at least 10 seconds.
Replacement Parts--- If replacement parts are
required, be sure the service technician has used
replacement parts specified by or have
the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Safety Check---Upon completion of any service
or repairs to this product, ask the service technician
to perform safety checks to determine that the
product is in proper operating condition.
Servicing--- Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
TV System---This unit is compatible with television
sets featuring either the NTSC or PAL color system.
Ventilation---Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation and protection from overheating. These
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided. Never place this product near
a heat source, such as heat registers, stoves,
radiators, or any other product that produces heat.
Water and Moisture---Do not use this product near
sources of water and moisture, such as bath tub, wash
bowl, kitchen sink, or wash machine; in a wet, damp
basement; or near a swimming pool or similar
locations. If moisture condensation occurs, remove
any disc, connect the unit's power cord to a wall outlet,
turn the unit on, and leave it on for two to three hours.
By then, the unit will have warmed up and evaporated
any moisture.
TABLE OF CONTENTS
Precaution ................................................ 1
System Setup............................................19
Safety Information .................................... .2
DVD Menu Setup ...................................... 19
Table of Contents .......................................3
Language Setup......................................................19
About Your DVD Player ............................ 4
Best Location..........................................................4
To Obtain a Clear Picture......................................... 4
Playable Discs........................................................4
Video Setup............................................................21
Audio Setup............................................................22
More Audio Setup....................................................23
Rating Setup...........................................................24
Digital Audio Output ................................................4
Mp3 function.............................................25
Laser-Head Over-Current Protection System ............4
JPEG files................................................ 26
Use of Disc ...............................................5
Trouble shooting....................................... 26
Handling.................................................................5
Technical specifications ................ 27
Cleaning.................................................................5
Storing...................................................................5
Front and Back panels .. .............................6
Front Panel.............................................................6
Back Panel.............................................................6
Remote Control..........................................7
Operating the remote control.......................8
Connecting Devices...................................,9
Speakers..................................................10
Arrangement of speakers...........................10
Connecting speakers.................................11
Connecting antenna..................................12
Connecting power supply...........................13
Playing the radio.......................................14
Basic DVD operation.................................15
Functions.................................................16
3
ABOUT YOUR
DVD PLAYER
The following will help you get the most enjoyment from your DVD receiver system.
BEST LOCATION
The unit should be placed on a firm, flat surface, away from VCRs, stereos, radios, or large
speakers, as the magnetic flux from these devices may cause distortion in the sound and a poor
picture. If placed in a cabinet, be sure there is at least 1 " of free space completely around the unit
for proper ventilation.
TO OBTAIN A CLEAR PICTURE
A DVD receiver is a precision device. If the optical pick-up lens and disc drive parts become dirty
or worn down, picture quality will become poor. To obtain a clear picture, regular inspection and
maintenance are recommended every 1,000 hours of use, depending on the operating environment.
Contact dealer for details.
PLAYABLE DISCS
This DVD receiver system will play the following types of discs: DVD, MP3, CD, CD-R,
and CD-RW with super-error correction ability. It is also capable of displaying picture CDs and digital
photo albums. It supports eight languages, up to 32 subtitles, and multi-angle viewing. It features
easy setup and operation with on-screen menus. It has full function CPU up grade able capability.
DIGITAL AUDIO OUTPUT
The unit's coaxial output capability enables you to connect an external six-channel AV amplifier
and processor with built-in Dolby Digital code and MPEG modulating capacity with just one
cord. This enables you to conveniently enjoy different DVD, CD, and Mp3 discs.
ANALOG AUDIO OUTPUT
4
Speaker system plug-and-play convenience through the built-in six-channel power amplifier
eliminates the use of an external power amplifier.
LASER-HEAD OVER-CURRENT
PROTECTION SYSTEM
To extend the service life of the laser head, the unit includes a unique laser-head over-current
protection system, ensuring a constant laser current.
USE OF DISCS
This page contains valuable information regarding the handling, cleaning, and storage of discs
played in this unit.
Handling
Do not touch the playback side of the disc.
Do not attach paper or tape to discs.
Do not stick or write anything on the surface. Protect against fingerprints.
Always hold a disc by the center and edge portions.
Cleaning
Fingerprints and dirt on the disc may cause picture and/or sound deterioration. Wipe the disc from
the center outward with a soft cloth. Always keep the disc clean.
If you cannot wipe the dirt off, lightly use a slightly moistened soft cloth and finish with a dry cloth.
Do not use any type of solvent such as: Paint thinner, benzene, commercially available cleaners or
anti-static spray for vinyl LPs.
Storing
Do not store discs in places subject to direct sunlight or near heat sources.
Do not store discs in places subject to moisture and dust.
Store discs vertically in a case. Stacking or placing objects on discs outside of their case may
cause warping.
NOTE: Is not responsible for damage that may occur to any disc that is operated
in this unit or not handled, cleaned, or stored as suggested above.
5
FRONT AND
BACK PANELS
Front Panel Functions
2
1
6
1 POWER
All connections must be checked before the
mains plug is inserted into the socket. Then
insert the mains plug carefully into the socket.
Press the POWER button on the front panel to
turn on the unit. When the power is turned on for
the first time, a short surge may disrupt the
function of other electronic equipment in the
same circuit. If so, connect the unit to a wall
socket of another circuit.
2. OPEN/CLOSE
This button is used to open and close the DVD
tray.
3. PLAY/PAUSE /AUTO
This button is used to start and pause playback
in DVD mode.
When the unit is in TUNER mode, the button can
be used to initiate an automatic channel search .
Back Panel Functions
1. ANTENNA
For connection of the supplied AM and FM
antennas.
2. AUX IN
For connection of external accessory
equipment, such as a CD player.
3. AUDIO OUT
For connection of an external amplifier if you
wish to hear the sound in another room.
4. VIDEO OUTPUT
5. S-VIDEO OUTPUT
6. REAR
For connection of rear speakers.
L
13
9
SW
COAXIAL
3
4
5
6
7
4. PREV/DOWN
This button is used to select the previous track
when the unit is in DVD mode.
In TUNER mode it can be used to initiate a
manual search at lower frequencies.
5. NEXT/UP
This button is used to select the next track when
the unit is in DVD mode.
In TUNER mode it can be used to initiate a
manual search at higher frequencies.
6. INPUT SIGNAL SOURCE
This button is used to select the input source.
Note: You may not hear any sound if the input
selected has not been connected to any unit.
7. VOLUME
This button is used to adjust the volume of all six
channels simultaneously.
7. FRONT/MAIN
For connection of front speakers.
8. CENTER/SUBWOOFER
For connection of center speaker and
subwoofer.
9. COAXIAL OUTPUT
10. 230V~50Hz
This unit is supplied with a power cord. Make
sure that the pins are dry before inserting the
plug into a wall socket. Do not pull the cord or
step on it.
11. SCART INPUT/OUTPUT
12. OPTICAL OUTPUT
13. OUTPUT FOR ACTIVE SUBWOOFER
For connection of an active subwoofer.
10
1
230V ~50Hz
R
VIDEO
S-VIDEO
OPTICAL
OUTPUT
2
3
4
5
12
11
6
7
8
REMOTE
CONTROLLER
7
OPERATING THE
REMOTE CONTROL
Battery Installation
1. Push down and out on the battery Compartment cover to remove it.
2. Insert the two " AAA " batteries into the battery
compartment of the remote control, making
sure the + and - signs on the batteries and
inside the battery compartment match up.
3. Replace the battery compartment cover.
8
Notes:
Do not mix batteries from different manufacturers, nor old ones with new.
If the remote control will not be used for an
extended period of time, remove the
batteries to prevent damage-causing
corrosion.
Remove dead batteries immediately to
prevent damage-causing corrosion.
If battery leakage occurs, wipe the battery
liquid from the battery compartment, then
replace both batteries.
Always replace both batteries at the same
time, using new, fully charged batteries.
Life expectancy of batteries may vary
depending on amount of use.
Using the Remote Control
Point the remote control at the remote sensor
on the DVD receiver. When the signal is
received from the remote, the unit will function
accordingly. The remote will operate to
approximately 16' from the remote sensor at an
angle of around 30 each direction.
Notes:
Do not direct the remote sensor toward
any light source, such as direct sunlight or
a strong fluorescent light, as it may cause
the unit to not operate correctly.
When other remote controls are used
nearby or when the remote is used near
equipment using infrared rays, interference
may occur.
Placing an object on the remote control
may cause it to inadvertently depress a
button, changing a function and shortening
battery life.
Do not glaze the front of the DVD receiver
with colored glass, as it may cause
interference with normal operation of the
controller.
Make sure there is no barrier between the
remote control and remote sensor, as it
could prevent the unit from receiving the
signal.
Do not spill water or put wet items on the
remote control.
Never disassemble remote control.
BATTERIES
INCORRECT USE OF BATTERIES MAY
CAUSE THEM TO LEAK, CORRODE OR EXP
LODE.
CONNECTING
DEVICES
CD
L
SW
COAXIAL
230V ~50Hz
R
VIDEO
OUTPUT
9
S-VIDEO
OPTICAL
Active
Subwoofer(Optional)
RECORDER
Connection terminals for this DVD receiver
are found on the rear panel. Read carefully
and follow the manufacturers' instructions
of any video and audio device being
connected to this unit.
Do not connect the power until all connections
have been properly completed.
Red terminal (marked R) is for connecting the
right channel. The white terminal (marked L)
is for connecting the left channel. The yellow
terminal is for video connection. Make sure
all connections are securely made. Improper
connections may cause noise, poor performance, or cause damage to the equipment.
Do not tie the AV cord with any other cords,
such as the power cord or speaker wires, as
it may result in poor picture and/or sound
quality.
ARRANGEMENT
OF SPEAKERS
SPEAKERS
The ideal surround sound speaker configuration may vary according to room size and wall
material. The figure below illustrates a typical
arrangement.
The configuration and arrangement of a
surround sound system's speakers is critical.
For maximum listening enjoyment, refer to the
Arrangement of Speakers section in this manual
prior to connecting speakers.
Hints:
Front or main speakers and central speaker
should be placed at the same level and in a way
that sound is oriented toward the listener's ears.
3D surround sound or rear speakers should
be placed 3' higher than the height of listener's
ears.
Subwoofer speaker may be placed anywhere
within the room, as its location produces little
effect on a listener's sensation to sound. To
obtain the optimum bass effect, a subwoofer is
recommended in home theater systems.
Surround Sound Speakers
Front or main right and left speakers;
center speaker
These three speakers provide extensive
sound imaging and augment the dynamic effect
of the audio. A movie's principal dialogue comes
through these speakers.
Rear or surround sound speakers
These two speakers provide 3-D dynamic
sound effects, and create an enveloping
atmosphere, as they add background sounds.
.
Subwoofer speaker
Provides rich and powerful bass, adding a
powerful dimension of realism.
10
Note: Audio recorded for the center speaker and
subwoofer will be assigned to the front and 3-D
rear speakers to obtain the optimum 3-D
surround sound effect.
1
3
4
5
2
6
1.TV set or screen
2. Front or main left speaker
3.Subwoofer
4.Center speaker
5.Front or main right speaker
7
6.3-D surround sound left speaker
7.3-D surround sound right speaker
8.Viewer's location
CONNECTING
SPEAKERS
This well-designed DVD receiver provides
optimum sound quality when the speakers used
are within the range of their rated impedance.
Connecting Speaker Cables
Important
The minimum impedance of the five speaker
terminals is 4 ohm; for the subwoofer, it is
8 ohm.
If you want to use only one speaker or listen
to monophonic music, do not parallel connect
individual speakers to the left and right
channel terminals. See the figure on the left
below.
1.Peel off approximately 1/ 2 " of cable
insulation
2.Tighten the wire end (#2 below)
3.Open cable terminal by pressing back on
tab
4.Insert wire end into terminal
5.Release tab; make sure wire is in terminal
securely
Note: To prevent damage to the circuit, care
should be taken to prevent short circuiting from
occurring at the positive and negative poles of
the speaker cord.
1
2
3
4
5
11
Subwoofer
Front-speaker
Center-speaker
翋秞眊
Front-speaker
L
SW
COAXIAL
230V ~50Hz
R
VIDEO
OUTPUT
S-VIDEO
OPTICAL
Surround-speaker
Surround-speaker
CONNECTING
ANTENNA
Radio signals may be difficult to receive in
some buildings and under certain conditions.
The provided antennas will help in their reception.
They are intended for indoor use only.
AM Loop Antenna
The placement of the AM loop antenna should
be in a direction that provides the clearest
reception. Keep as far as possible from DVD
receiver, TV set, and speaker and power cords.
If reception remains poor, an outdoor antenna
may be necessary.
12
To connect the AM loop antenna:
1.Hold down handle
2.Insert wire end into hole
3.Release handle
Position for best reception
FM Indoor Antenna
The FM antenna should be fully extended
and in a direction that provides the clearest
signal. Secure the antenna ends in a location
where distortion is a minimum. If reception
remains poor, an outdoor antenna may be
necessary.
AM
FM
1
2
3
Outdoor AM antenna
Coaxial cable(75 ohm)
FM
Coaxial cable (75 ohm)
Outdoor FM antenna
CONNECTING
POWER SUPPLY
Before plugging the power cord into the AC outlet, check to make sure all of the connections
have been properly completed. When they have been, carefully plug power cord into outlet.
Press the POWER button on the front panel to power the unit. The display panel will light.
When the unit is initially powered, a brief surge of electricity may cause interference with other
electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different
circuit.
BASIC OPERATION
Selecting Sound Source
1. Press any function button (DVD, TUNER,
TV , AUX) to select the desired sound source.
The appropriate symbol will appear in the display.
2. When the TUNER button is pressed,
the last station listened to will play.
Note: The desired program source will not play
unless it and the selected signal button coincide
with the active program source signal input.
Volume Control
The volume may be adjusted by either turning
the large volume knob on the front panel or
using the appropriate volume button on the
remote control.
Mute
Pressing the MUTE button temporarily mutes
every speaker. To resume audio, press MUTE
button again.
13
PLAYING THE RADIO
Tuner button
Number button
14
Positioning
1.Press TUNER button to select desired wave
band (AM or FM).
2.Press UP or DOWN button to find a station.
The frequency will change with each press.
When a station's signal is received, it will
appear in the display.
3.To lock onto a station quickly, hold the UP
or DOWN button for two seconds. The unit
will start automatic tuning. When a station
is found, automatic tuning stops.
4.To add a station to memory, press the MEMO
button. The memory storage number will
blink for four seconds in the display. Press
MEMO again to store the station.
Automatic Tuning
This unit will store up to 50 individual AM or
50 individual FM radio stations in its memory.
1.Press the >> button. The word AUTO
will appear in the display and the automatic
tuning mode is activated.
2. Stations will be stored in ascending order
until 50 stations of that particular wave band
have been saved. When a station is stored, the
memory storage number, as well as the
station's frequency, will flash for four
seconds in the display.
3. When the total number of stations reaches
50, in a particular wave's (AM or FM) memory,
no further station in that wave band will be saved.
Memory number
Wave band
Station frequency
5. To reduce noise when an FM-stereo program
has been received, press the MONO button.
The word STEREO will disappear from the
display. The program is now heard in
monographic form, reducing the noise. To
resume stereo play, press the MONO button
again.
To Play Preset Stations
1.Press the TUNER button to select the
desired wave band.
2.Press the PRE/TUN button.
3.Press any of the numbered buttons to
select the desired station's memory number.
For example, to play the station at memory
#5, simply press the 5 button; for memory
#17, press the 1 button followed by the 7
button.
4.Stations in the memory function may also
be accessed by pressing the UP or DOWN
button.
BASIC DVD
OPERATION
Once the unit is connected to a television
set and any other accessory equipment, you
are ready to enjoy the excitement of DVD videos
or your favorite CDs and MP3 files.
Once it has read the disc, the unit automatically will begin playback. When playing a DVD,
the DVD title or menu will appear. CD tracks are
played in sequence.
To play a DVD video disc:
Turn on the TV and select the A/V mode. If
the set features an SCART connection, be sure
the SCART mode is selected from the TV menu.
Turn on amplifier, if connected. Select AC-3 or
DVD mode.
Note:
It is possible to damage a disc if it is not
placed correctly on the guides in the disc tray.
This may also cause the DVD player to
malfunction. Do not force or place anything
other than a 5 " DVD or CD onto the disc tray.
Never move the DVD player during playback ,
as this may cause damage to the disc as well as
the player. To open and close the disc tray, only
use the OPEN/CLOSE key found on both the
remote control and on the unit's front panel.
To play an audio disc:
Turn on the audio system and choose the
input source that is connected to the DVD player.
Set the SPDIF OUTPUT to SPDIF OFF from the
SETUP MENU display if you don't have the
proper equipment for Dolby Digital surround
sound.
PLAY
REMOTE CONTROL
PLAY
1. Press the POWER key on front panel.
DISC LOADING appears on screen.
POWER
LOADING
FRONT PANEL
Press PAUSE key:
PAUSE
REMOTE CONTROL
PAUSE
FRONT PANEL
If there is no disc, NO DISC shown on screen:
NO DISC
5. PREV/NEXT playback
Press
key or key , play previous or next
track. To resume normal playback, press PLAY key.
Press PREV key:
2. Press the OPEN/CLOSE key. The disc
tray will open.
OPEN/CLOSE
OPEN
REMOTE CONTROL
Press NEXT key:
FRONT PANEL
OPEN/CLOSE
REMOTE CONTROL
3. Place the disc on the disc tray. Be sure
play side is face down on the tray.
4. Press OPEN/CLOSE key to close tray.
The disc tray will close. The disc type will
appear in the upper-left-hand corner of the
screen.
REMOTE CONTROL
6.Fast Forward/Reverse Playback
The unit features both fast forward and fast
reverse playback. Either mode will speed up:
2x,4x,8x,16x.
15
BASIC DVD
OPERATION
2X
FUNCTIONS
Screen Display
While a disc is playing, the status of various
functions may be checked, such as the tile, track
number, and several time categories.
1. Press the DISPLAY key once and the title
appears along with the chapter and how much
time has played.
2X
DISP
To activate either function, simply press the
key or key on the remote control. The
speed changes each time the key is pressed.
To resume normal playback, press the PLAY key.
TT 01/02 CH 02/ 28
00:21:05
2. Press the DISPLAY key again and the
remaining time for that particular title appears.
TITLE REMAIN
16
Memory Playback
This unit allows the viewer to stop playback,
then later continue playback from that exact disc
location. Press the STOP key to halt playback.
The unit then will memorize the location where
playback was stopped. To resume watching,
press the PLAY key and the unit will
resume playback from the exact location where
playback was stopped. (Exclude Mp3 DISC)
When you play DVD discs, press MENU or
TITLE key return menu and title, the unit then
will memorize the location, To resume watching
press the PLAY key and the unit will resume
playback from the exact location.
PLAY
01ㄩ44ㄩ34
3. Press the DISPLAY key again and the total
elapsed time for that particular chapter appears.
CHAPTER ELAPSED
00ㄩ05ㄩ29
4. Press the DISPLAY key again and the
total remaining time for that particular chapter
appears.
CHAPTER REMAIN
00ㄩ07ㄩ36
Slow Motion
This DVD receiver has the ability to play
discs in slow motion in either forward or reverse
direction. Each time the SLOW key is pressed,
the speed will slow from forward slow speed1/ 2,
to 1/ 4, to 1/ 8, to 1/ 16 to reverse slow speed 1/ 2,
to 1/ 4, to 1/ 8, to 1/ 16, to normal speed. To
resume normal playback, press the PLAY key.
SLOW
5. Press the DISPLAY key again and the
display turns off.
FUNCTIONS
N/P
This DVD receiver supports video output of
various systems, including auto, NTSC, and PAL.
The picture will blink and become colourless
when the wrong system is selected. (NTSC for
North America, PAL for Europe). For more
information on output format, refer to the TV
set's manufacturer's instructions.
Language
The unit has the capability to show movies in
one of eight languages.
1. Press the AUDIO key. The language
menu will appear. Select the desired language
by pressing the AUDIO key.
AUDIO
Subtitles
The unit has the capability to display subtitles
in any of 32 different languages.
1. Press the SUBTITLE key. The subtitle
menu will appear. Select the desired language
by pressing the SUBTITLE key.
AUDIO 1/8 AC-3 2CH ENGLISH
Note: The disc being played must be multi-language encoded.
SUBTITLE 02/08 ENGLISH
SUBTITLE
2. To remove the subtitles from view, press
the SUBTITLE key until they disappear.
SUBTITLE OFF
Note: The disc being played must be multisubtitle encoded.
Camera Angle
The ability to change the camera angle allows
viewer to play director and watch a movie from
different perspectives.
1. Press the ANGLE key on the remote control.
With each press, the camera angle changes.
2. The key may be pressed only when the
flashing angle icon appears in the unit's display
panel.
ANGLE
1/4
Note: Camera angle may be changed only in
discs with multi-angle capability encoded
into them.
LOCATING A TITLE
DVD discs are normally divided into titles,
which are then sub-divided into chapters. A
specific title can be easily found with this unit.
Specific titles can be found using either the title
menu function, if the DVD disc contains a title
menu, or through its unique title number.
Title Menu Function
1. Press the TITLE key. The title menu will
appear on the TV screen.
2. Press the appropriate scroll key to select
the desired title. A title may also be located by
pressing its assigned number with the number
buttons.
3. Press the ENTER key . This will start
playback from chapter 1 of the selected title.
Note:
Some discs do not respond to this function. If
different instructions appear on the TV screen,
follow those instructions. The Instructions given
here describe the basic procedure. Procedures
may vary depending on the content of the DVD
disc. When playing a VCD2.0 disc, TITLE key
can be used to return to menu.
17
FUNCTIONS
Time
This DVD receiver can display various data
regarding the disc being played. Press the
DISP button for the following.
1. Press once, the number of titles and
chapters in each title appears
TITLE 01/02 CHAPTER 06/28
DISP
REPEAT
TITLE
The repeat mode changes each time the
REPEAT key is pressed (i.e., from title repeat
to chapter repeat, all repeat , to repeat off.)
.
2. Press again, the time of a selected title
appears.
REPEAT
ALL
TITLE 01/02 TIMEㄜㄜ:ㄜㄜ:ㄜㄜ
DISP
18
MENU: MENU/PBC
With the PBC function on, choosing a song
on a CD can only be done when at the main
menu. With the PBC function off, song selections
can be made by entering the relevant number
keys. The menu content of the disc will appear
when the MENU button is pressed while a DVD
disc is playing.
AMP Volume up/down Adjustment
Press the CH.SEL button on the remote control, TV
OSD appears:
VOL_L +00db
Press CH.SEL twice, OSD Appears:
VOL_R +00db
MENU
AUDIO
SUBTITLES
PLAY
Press CH.SEL thrice to seven times the OSD
converts in turn of RF, LS, RS, CN and SW;
VOL_RS +00db
VOL_LS +00db
VOL_C +00db
Repeat Play
This DVD receiver allows repeated playback
of specific titles, chapters/tracks, or segment.
It even allows switching between two items that
are being repeated.
1. Select the item to repeat.
2. Press the REPEAT key.
REPEAT
CHAPTER
VOL_SW +00db
Press CH.SEL continually it goes in cycle.
Press the VOL+ or VOL- button on the remote
control to change the Volume value of ALL, LF, RF,
LS, RS, CN or SW separately.
MONO/
CH.SEL
VOL_L +00db
FUNCTIONS
Zoom
A picture may be enlarged up to four times
during either playback or slow motion through
the unit's zoom function. Press the ZOOM key
once and it enlarges the image 2x, press a
second time and the image enlarges 3x. A
third press enlarges the image 4x. A forth
press enlarges the image 1/2x, a fifth press
enlarges it1/3x, a sixth press enlarges it1/4x . To
return to normal-size playback, press the ZOOM
key a seventh time. Enlargement takes place
in the center of the picture.
Volume and Mute
The volume on this DVD receiver is easily
controlled with the remote control by pressing
either the VOL + key to raise the volume or the
VOL- key to lower it. By pressing the MUTE
key, no audio will be heard. To reinstate the audio,
press the MUTE key again.
Program
Allows you to program specific tracks in a
desired order of play. Press PROG key and
program menu w i ll appear on the screen, set up
the program play in number key. Th en scroll to
START . Press ENTER key to program play. To
exit the Programmed play mode, press the
PROG button again.
DVD Menu Setup
By pressing the SETUP key on the remote
control, the main setup menu appears.
1. After accessing the setup menu, press the
scroll key for up or down movement to select a
desired item. Once an item is selected, press
the PLAY key to confirm your entry and to move
to the Sub-entry.
2. Use the left or right scroll key to move the
pointer and the up or down scroll key to select
the Desired option. Once an item is selected,
press the ENTER key to confirm your selection.
This completes the setup of the selected
function.
19
SYSTEM SETUP
SETUP
Language
Video
Audio
More Aud
Rating
Press
item.
With the unit in DVD mode
and stopped, press
SETUP and the following
setup menu will appear on
the TV screen:
to go to the next
A. Press ENTER to activate a
submenu.
B. Press SETUP to exit the
setup menu.
Setup Menu
Language Setup
Select [Language] in the setup menu, and press ENTER to view the [Language] submenu:
Language
Press
to
select menu item:
Video
Audio
OSD Menu
English
Subtitle
English
Audio
English
DVD Menu
English
More Aud
Rating
A. Press ENTER or
to select
B. Press
to go back one menu item.
C. Press
or
repeatedly to return
to the setup menu.
SYSTEM SETUP
Language Setup
Select [OSD Menu] in the setup menu, and press ENTER or
Menu] submenu:
Language
Video
Audio
More Aud
OSD Menu
English
English
Subtitle
English
Deutsch
Audio
English
Français
DVD Menu
English
Espańol
Rating
Press
to change your selection.
A. Press ENTER to confirm your
selection.
B. Press SETUP to exit the setup
menu.
Select [Subtitle] in the setup menu, and press ENTER or
submenu:
Language
Video
OSD Menu
20
Audio
More Aud
to view the [OSD
to view the [Subtitle]
Rating
English
Press
to change your selection.
Note: Subtitle languages may vary from
disc to disc.
DVD Menu English
A. Press ENTER to confirm your
selection.
B. Press SETUP to exit the setup
menu.
Select [Audio] (Syncronisation) in the setup menu, and press ENTER or
to view
the [Audio] submenu:
Subtitle
English
English
Audio
English
German
French
Spanish
Auto
Off
Language
Video
Audio
More Aud
OSD Menu
English
Subtitle
English
Audio
English English
DVD Menu
English German
French
Spanish
Rating
Press
to change your selection.
Note: Audio languages may vary from
disc to disc.
A. Press ENTER to confirm your
selection.
B. Press SETUP to exit the setup
menu.
Select [DVD menu] (Menu language) in the setup menu, and press ENTER or
view the [DVD menu] submenu:
Language
Video
Audio
Subtitle
English
Audio
English
DVD Menu
English
More Aud
English
German
French
Spanish
to
Rating
Press
to change your selection.
Note: Menu languages may vary from
disc to disc.
A. Press ENTER to confirm your
selection.
B. Press SETUP to exit the setup
menu.
SYSTEM SETUP
Video setup
Select [Video] in the setup menu, and press ENTER to view the [Video] submenu:
Language
Press
to
select menu item:
Video
TV Shape
Audio
More Aud
Rating
A. Press ENTER or
to select one of the
options.
B. Press
to go back one item.
C. Press
or
repeatedly to return to
the setup menu.
4:3 PS
TV Syste m
NTSC
Video Outp ut
S-Video
Select [TV Shape] in the setup menu, and press ENTER or
Language
Video
Audio
More Aud
to view the [TV Shape] submenu:
Rating
TV Shape
4:3 PS
4:3 PS
TV System
NTSC
4:3 LB
Video Output
S-Video
16:9
Press
to change your selection.
A. Press ENTER to confirm your
selection.
B. Press SETUP to exit the setup
menu.
[4:3 PS] - Pan and Scan refer to pictures where parts of the picture have been cut off to fit the
entire screen.
[4:3 LB] - Letter Box refers to pictures where a black bar is visible at the top and at the bottom of
the screen.
[16:9] - Refers to a picture that fills up the entire screen of a widescreen TV.
Note: Not all DVD discs offers all these formats. If a format is not available, the disc will overwrite
your TV Shape settings and show the movie in the available format.
Select [TV system] in the setup menu, and press ENTER or
Language
Video
Audio
More Aud
to view the [TV system] submenu:
Rating
TV Shape
4:3 PS
TV System
NTSC
NTSC
Video Output
S-Video
PAL
AUTO
Press
to change your selection.
A. Press ENTER to confirm your
selection.
B. Press SETUP to exit the setup
menu.
[NTSC] - Select this if a NTSC signal is required to match the settings
on your TV set.
[PAL] - Select this if a PAL signal is required to match the settings on
your TV set.
[AUTO] - Select this if your TV set can transmit both NTSC and PAL
signals.
21
SYSTEM SETUP
Select [Video Output], and press ENTER or
the [Video Out] submenu:
to view
A. Press ENTER to confirm your selection.
B. Press SETUP to exit the setup menu.
Language
Video
TV Shape
TV System
Video Output
Note: Composite video outputs are always available.
[S-Video] - Select this if the unit is connected to your
TV set through an S-Video cable.
[RGB] - Select this if the unit is connected to your TV
set through a Scart cable.
Audio
More Aud
Rating
4:3 PS
NTSC
S-video
S-Video
RGB
Press
to change your selection.
Audi o Set up
22
The Audio menu allows you to set analog and digital audio outputs to match any external units.
For instance: If your unit is connected to a TV set through the analog stereo outputs, you must set the
analog outputs to "2 Channel" to be able to enjoy the sound in downmixed stereo.
You can set the audio format individually for each of the following inputs: Dolby Digital,
Mp3, CD and Others.
You must stop DVD playback to be able to make changes in the setup menu.
Dolby Digital settings:
Follow these instructions to set the analog and digital audio output formats for
Dolby Digital sound.
A
When the DVD has stopped, press SETUP.
B
Select Audio and press ENTER.
Language Video Audio More Aud Rating
C
Select Ac3 and press ENTER.
D
Set Analog Out to:
Analog Out Digital Out
PCM
5.1 Channel (Default): For Dolby Digital playback in the AC3
5.1 channel
PCM
Raw
Off
original format, i.e. sound through all outputs.
MP3/WMA
5.1 channel
PCM
Others
5.1 channel
PCM
2 Channel: For downmixing of a 5.1 signal, i.e. Stereo
sound.
5.1 channel
2 channel
E
Set Digital Out to:
Off
PCM (Default): For transmitting a 2-channel stereo
signal through the digital outputs (Optical/Coaxial) to e.g. a minidisc or a CD recorder.
RAW: For transmitting the raw 5.1 channel digital bitstream signal through the digital outputs
(Optical/Coaxial) to e.g. an external digital surround receiver.
Off: For deactivation of the digital outputs.
F
Press SETUP to save and exit the setup menu.
SYSTEM SETUP
MP3/WMA settings
Follow these instructions to set the digital output signal
Language Video Audio More Aud Rating
when you wish to play Mp3 tracks.
(Note: The analog format is locked to stereo):
Analog Out
Digital Out
A.
When the disc has stopped, press SETUP.
PCM
5.1 channel
Ac3
PCM
5.1 channel
MP3/WMA
B.
Select Audio and press ENTER.
PCM
5.1 channel
Others
C.
Select MP3 and press ENTER.
D.
Set Digital out to:
PCM (default): For transmitting a 2-channel stereo
signal through the digital outputs (Optical/Coaxial)
to e.g. a minidisc or a CD recorder.
Off: For deactivation of the digital outputs.
Language Video Audio More Aud Rating
E.
Press SETUP to save and exit the setup menu.
Analog Out
Digital Out
Others Others
PCM
5.1 channel
AC3
Follow these instructions to set the analog and digital
PCM
5.1 channel
MP3/WMA
output signals when you wish to play other audio tracks:
PCM
5.1 channel
Others
A. When the disc has stopped, press SETUP.
B. Select Audio and press ENTER.
C. Select Others and press ENTER.
D. Set Analog Out to:
5.1 Channel (Default): For Dolby Digital playback in the original format, i.e. sound
through all outputs.
2 Channel: For downmixing of a 5.1 signal, i.e. stereo sound.
E. Set Digital Out to:
PCM (Default): For transmitting a 2-channel stereo signal through the digital
outputs (Optical/Coaxial) to e.g. a minidisc or a CD recorder.
RAW: For transmitting the raw 5.1 channel digital bitstream signal through the
digital outputs (Optical/Coaxial) to e.g. an external digital surround receiver.
Off: For deactivation of the digital outputs.
F.
Press SETUP to save and exit the setup menu.
PCM
Raw
Off
5.1 channel
2 channel
Off
PCM
Raw
Off
5.1 channel
2 channel
Off
23
More Audio Setup
In the More Audio menu the following settings can be made: Prologic,
Subwoofer, Test Tone, DRC and LPCM settings.
Prologic settings:
This unit features an integrated Dolby Prologic decoder that can give you a
virtual surround sound experience.
A.
When the disc has stopped, press SETUP.
Language Video
B.
Select and press ENTER.
Prologic
C.
Select Prologic and press ENTER.
Subwoofer
D.
Select the desired Prologic setting and press enter.
Test Tone
OFF (Default): The Dolby Prologic decoding function will
DRC
always be deactivated.
LPCM
ON: Dolby Prologic will always be activated.
E.
Press SETUP to save and exit the setup menu.
Subwoofer settings:
In the setup menu it must be indicated whether a subwoofer is connected to the
system or not (indicated by the figure 1 in 5.1):
A.
When the disc has stopped, press SETUP.
B.
Select More Audio and press ENTER.
C.
Select Subwoofer and press ENTER.
Language Video
D.
Select the desired subwoofer setting and press ENTER.
ON (Default): A passive or an active subwoofer is connected Prologic
Subwoofer
to the unit for reproduction of LFE (Low Frequency Effect)
Test Tone
signals.
DRC
OFF: No subwoofer is connected to the unit.
LPCM
E.
Press SETUP to save and exit the setup menu.
Audio
More Aud
On
On
Off
Off
96k
On
Audio
On
On
Off
Off
96k
Rating
Off
More Aud
On
Off
Rating
SYSTEM SETUP
Test tone settings
The test tone can manually be set to right front
speaker, left front speaker, center speaker, right
rear and left rear speakers.
A.
When the disc has stopped, press SETUP.
B.
Select More Audio and press ENTER.
C.
Select Test Tone and press ENTER.
D.
Select the desired test tone setting and
press ENTER.
E.
Press SETUP to save and exit the setup
menu.
DRC settings
DRC stands for Dynamic Range Compression.
A.
When the disc has stopped, press SETUP.
B.
Select More Audio and press ENTER.
C.
Select Test Tone and press ENTER.
D.
Select the desired test tone setting and press
ENTER.
ON: Compresses the sound effects in a movie
in relation to speech.
OFF (Default): The sound will remain
Uncompressed.
E.
Press SETUP to save and exit the setup menu.
24
LPCM settings
A.
When the disc has stopped, press
SETUP.
B.
Select More Audio and press ENTER.
C.
Select LPCM and press ENTER.
D.
Select the desired LPCM setting and
press ENTER.
E.
Press SETUP to save and exit the setup
menu.
Language Video
Prologic
Subwoofer
Test Tone
DRC
LPCM
Language Video
Audio
More Aud
On
On
Off
Off
96k
Off
On
Audio
More Aud
Prologic
Subwoofer
Test Tone
DRC
LPCM
Rating
Off
Left
Center
Right
Left Surr
Right Surr
On
On
Off
Off
96k
Prologic
Subwoofer
Test Tone
DRC
LPCM
Language Video
More Aud
Audio
On
On
Off
Off
96k
Rating
Rating
96k
48k
Rating Setup
Rating includes Password, Rating, Last Memory and
Language Video Audio
Reset.
Password locks the rating setting. There is no
Password
---factory-set password. You can enter your own password. Rating
8. Adult
It must contain four numbers. The default password is Last Memory On
8888 in case you forget your own password.
LOAD Factory Reset
Rating can be set as you please, and depending on the
level, certain movies will be blocked.
Note: Not all movies can be locked this way.
Last Memory allows you to start where you stopped the movie last time.
LOAD Factory downloads the pre-programmed factory settings.
Note: All the settings you have made will be deleted.
More Aud
Rating
1:Kid Safe
2:G
3:PG
4:PG-13
5:PG-R
6:R
7:NC-17
8:Adult
MP3 FUNCTION
Mp3 is an audio compression method that applies level 3 of the international MPEG standard
whereby a sound signal is compressed at the ratio of 12:1.
It means that an Mp3 disc may contain up to 600 minutes of music, or up to 170 tracks, depending on
the sound quality.
How to play an MP3 disc
MP3 file menus
When you play an Mp3 disc, two to playback modes can be selected: FILE LIST and PROGRAM.
1.
2.
FILE LIST
A list of the tracks on the disc will be displayed. You mark them by moving the marking bar by
means of the arrow keys and select them by pressing ENTER.
PROGRAM
Press the PROG key. An empty list will be displayed where you can fill in the desired tracks by
Means of the number keys. Finally, press the PLAY key.
25
JPEG FILES
TROUBLE SHOOTING
JPEG is a compressed picture format used for picture
storage.
Even if pictures are compressed up to 15-20 times,
their quality remains outstanding. JPEG files are ideal
for storing of pictures as they are supported by most
types of software for picture processing, contain small
data and are easy to use. This DVD player can read
pictures in JPEG format on CD discs.
Press the relevant number key to select photo
display.
1. Insert the disc correctly, then the machine will start
searching for disc information.
2. Press a number key to select a photo.
A
ROOT
SMART NAV I
Root
PHOTO-01
PHOTO-02
PHOTO-03
PHOTO-04
PHOTO-05
0
1
2
3
4
5
B
SMART NAV I
ROOT
PHOTO-01
P-01
PHOTO-02
P-02
PHOTO-03
P-03
PHOTO-04
P-04
PHOTO-05
P-05
3. The function is only active in the photo displayed
when a number key has been pressed.
26
How to play by menu
1. Insert the disc, then the machine will start
searching for disc information and the photos will
be displayed automatically.
If you press stop, the main menu will be displayed.
2. Press a number key to select a photo. Press the
PLAY key to start. Press the SCROLL key to select
photos and then press PLAY.
3. In stop mode you press SCROLL to select other
photos.26
This handy trouble-shooting guide is
provided to save you time in case you experience
any inconvenience with this DVD player. If the
problem is not listed or if the provided solution
does not correct the problem please call our
customer support department .
Problem Possible Solution
No power
1. Check to ensure that the power plug is
securely in the wall outlet.
No sound
1. Check the connection between the DVD
player and the TV set, amplifier, or any
other unit it is connected to.
2.Check to ensure the TV and amplifier are
in the correct mode.
No picture
1. Check the connection between the DVD
player and the TV set or any other unit it
is connected to.
2.Check to make sure TV is turned on.
Disc does not play
1.Check to make sure the disc is loaded
correctly label side facing up on disc tray.
2.Check that disc is clean from dirt, dust,
fingerprints, and smudges.
3.Check to ensure disc is with in the guides
on the tray.
4.Check if parental lock function is on.
5.Make sure disc is for use in region
Remote does not work.
1. Check batteries; possibly replace.
2. Check to ensure there isn't any obstacles
between the remote sensor on the unit's
front panel and the remote control.
3.Be sure the remote is aimed at the remote
sensor.
Divided picture
1.Check that disc is clean and has no
scratches.
2. The unit is controlled by a micro computer,
which may need to be reset. Turn off the
unit's power, wait several seconds, then
turn back on.
No color picture
1. Check to see if the S connector is damaged (bent pin).
MP3 discs don't play
1. Use another software edition to re burn
disc, as the edition used may not be compatible with the player.
2. Use new editions of software such as Audio
station 4, "E asy CD Creator " , To ast
Titanium, etc.
3. Make sure MP3 file is not encoded with a
variable bit rate, such as provided by Real
Networks.
TECHNICAL
SPECIFICATIONS
DVD Player
TV System
Compatible Discs
Resolution Ratio
Video S/N Ratio
Frequency Response
Audio S/N Ratio
Degree of Distortion
D/A Converter
Video Out
S-Video Out
Audio Out
NTSC/PAL
DVD, CD, Mp3,
JPEG,CD-R, CD-RW
Greater Than 500 lines
65dB
fs (96KHz/24bit)
4Hz - 44KHz:+/-2dB
95dB
<0.01%
192KHz/24bit
1Vp-p
Y: 1Vp-p(75 )
C: 0.3Vp-p(75 );
2.0V
5.1 Channel,
Digital Audio Output
Connections
Coaxial
SCART,CVBS
S-Video, 2 Channel
Output
FM Tuner
Tuning Range
Remote Control
Transmitter
Signal Range
Power Source
General
Power Supply
Consumed Power
Size (WxHxD)
> 76dB
350mv, 47k
> 30dB (Normal)
Infrared Ray
Approximately 5m
2 " AAA " Batteries
AC 230/50Hz
60W
Because its products are subject to continuous
improvement, We reserves the right to modify
product design and/or specifications without
notice and without incurring any obligations.
87.5-108MHz
S/N Ratio
Monophonic
Stereo
Selectance
THD
Monophonic
Stereo
Frequency Response
Stereo Resolution
S/N Ratio
Input Sensitivity
Channel Seperation
>46dB
>46dB
>50dB (DIN)
50dB
2%
3%
30Hz-10kHz +/- 1dB
35dB (1kHz)
30dB (100Hz-10kHz)
AM Tuner
Tuning Range
S/N Ratio
THD
Amplifier
MAX Output Power:
5 x 20 W 4ohm musicpower
1 x 40 W 8ohm musicpower
522-1620KHz
35dB
3%
27
28