Emerson 3-9000-763 Computer Accessories User Manual

Quick Start Manual
P/N 3-9000-763, Rev C
March 2013
Daniel ™ MeterLink™ Software v1.10
for Daniel Gas and Liquid Ultrasonic Flow Meters
Software License Agreement
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE INSTALLING AND USING THE
SOFTWARE. IF YOU DO NOT AGREE WITH THE TERMS OF THE AGREEMENT, YOU ARE NOT PERMITTED TO USE THE SOFTWARE
AND MUST RETURN THE SOFTWARE AND INSTALLATION GUIDE TO THE PLACE WHERE YOU OBTAINED IT, IF APPLICABLE.
Daniel Measurement and Control, Inc. (“DANIEL”) provides this software (“Program”) and installation guide (collectively, “Daniel
MeterLink(TM) product”) for your use. You assume responsibility for the acquisition of a machine(s) and associated equipment
compatible with the Program, and for installation, use, and results obtained from the Program. DANIEL grants to you a nontransferable, non-exclusive license to: (a) install and use the Program provided to you to run on any number of your machines and
(b) copy the Program for backup purposes. You must reproduce and include the copyright notice or any other proprietary notice on
any copy of the Program. YOU MAY NOT REVERSE ENGINEER, USE, COPY OR MODIFY ANY PROGRAM OR RELATED MATERIALS
OR ANY COPY OR MODIFICATION, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS LICENSE. IF YOU
TRANSFER POSSESSION OF THE DANIEL METERLINK(TM) PRODUCT OR ANY COPY OF THE DANIEL METERLINK(TM) PRODUCT
TO ANOTHER PARTY, WITHOUT DANIEL'S PRIOR WRITTEN CONSENT, YOUR LICENSE IS AUTOMATICALLY TERMINATED. No
license, express or implied, is granted under any intellectual property directly or indirectly owned by DANIEL which does not
specifically read on the Daniel MeterLink(TM) product as provided hereunder, nor shall any license, except the license specifically
granted herein, be implied in law, implied in equity, or exist under the doctrine of patent exhaustion. The Daniel MeterLink(TM)
product accompanying this Agreement whether on disk, downloaded or on any other media or in any other form are licensed, not
sold, to you by DANIEL for use only under the terms of this Agreement, and DANIEL reserves all rights not expressly granted to you.
The terms of this Agreement will govern any software upgrades provided by DANIEL that replace and/or supplement the original
Daniel MeterLink(TM) product, unless such upgrade is accompanied by a separate license in which case the terms of that license will
govern.
1.
TITLE AND COPYRIGHT: Title to and ownership of the Daniel MeterLink(TM) product shall at all times remain with DANIEL or its
licensors and is protected by United States copyright laws and international treaty provisions. Your right to use the same is at all
times subject to the terms and condition of this Agreement. DANIEL may, from time to time, revise or update the program and/or
installation guide and, in so doing, incurs no obligation to furnish such revisions or updates to you.
2.
TERM: You may terminate this license at any time by destroying the media on which the Program was furnished and the
installation guide together with all copies in any form. In addition, the Program installed on the machine(s) must be uninstalled or
rendered unusable. This license will also terminate upon conditions set forth elsewhere in this Agreement or if you fail to comply
with any term or condition of this Agreement. You agree upon such termination to destroy the media on which the Program was
furnished and the installation guide together with all copies in any form and to uninstall or render unusable the Program installed
on the machine(s).
3.
LIMITED WARRANTY: DANIEL warrants the media on which the Program is furnished to be free from defects in materials and
workmanship under normal use for a period of ninety (90) days from the date of delivery to you as evidenced by a copy of your
invoice. However, DANIEL does not warrant that the functions contained in the Program will meet your requirements or that the
operation of the Program will be uninterrupted or error free. THE DANIEL METERLINK(TM) PRODUCT IS PROVIDED“AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION. The above Limited Warranty is void if the
failure of the Program has resulted from accident, abuse or misapplication.
4.
LIMITATIONS OF REMEDIES: DANIEL's entire liability and your exclusive remedy shall be the replacement of any media not
meeting DANIEL's “Limited Warranty”. IN NO EVENT SHALL DANIEL BE LIABLE TO YOU FOR ANY DAMAGES ARISING OUT OF
ANY CAUSE WHAT SO EVER (WHETHER SUCH CAUSES ARE BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER
TORT, PATENT INFRINGEMENT OR OTHERWISE), INCLUDING ANY LOST PROFITS, LOST SAVINGS OR INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PROGRAM EVEN IF DANIEL HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY.
5.
GOVERNING LAW: This Agreement, and all matters concerning its construction, interpretation, performance or validity, shall be
governed by the laws of the State of Texas, excluding its conflict laws.
6.
EXPORT RESTRICTIONS: You shall comply fully with all laws, regulations, decrees and orders of the United States of America that
restrict or prohibit the exportation (or re-exportation) of technical data and/or the direct product of it to other countries,
including, without limitation, the U.S. Export Administration Regulations.
7.
U.S. GOVERNMENT RIGHTS: The Daniel MeterLink(TM) product is provided with “RESTRICTED RIGHTS”. Use, duplication or
disclosure by the U.S. Government is subject to restrictions set forth in the Federal Acquisition Regulations and its Supplements.
8.
GENERAL: You may not sublicense, assign, or transfer the license or the Program and installation guide without the prior written
consent of DANIEL. Any attempt otherwise to sublicense, assign or transfer any of the rights, duties, or obligations hereunder
without such consent is void. THE PROGRAM IS NOT FOR USE IN ANY NUCLEAR AND RELATED APPLICATIONS. You accept the
program with the foregoing understanding and agree to indemnify and hold harmless DANIEL from any claims, losses, suits,
judgments and damages, including incidental and consequential damages, arising from such use, whether the cause of action be
based in tort, contract or otherwise, including allegations that DANIEL's liability is based on negligence or strict liability. To the
extent that a third party owns and has licensed to DANIEL any portion of the program, such third party owner shall be a
beneficiary of this Agreement, and shall have the right to enforce its rights under this Agreement independently of DANIEL.
Should you have any question concerning this Agreement, please contact your DANIEL representative or sales office. YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND
CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN
US WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS
BETWEEN US RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. YOU AGREE THAT DANIEL MAY AUDIT YOUR
FACILITY TO CONFIRM COMPLIANCE WITH THE FOREGOING PROVISIONS.
™
Daniel MeterLink system requirements
1
Daniel MeterLink™ system
requirements
Installation system requirements
Software requirements
®
Windows XP Service Pack 2 or later
Windows Vista
®
™
Windows 7 (Ultimate, Home Premium and Professional 32- and 64-bit editions)
®
Windows 8 ("basic", Pro and Enterprise 32- and 64-bit editions)
™
®
Microsoft Excel 2000 or later version (log file(s) are CSV format if Excel 2000 or later is not available)
®
Microsoft XML parser v2.6 or above
Internet Explorer 5.01 or later
Note
Daniel CUI should not be run simultaneously with Daniel MeterLink™
Hardware
PC with a 133MHz Pentium or higher processor (300MHz recommended)
One serial port available for remote/local connection (for on-line operations)
One Ethernet port available for remote/local connection (for on-line operations)
One parallel port for connection to a local printer, or a connection to a network printer (optional)
100MB of free hard disk space
Super VGA monitor (at least 1024x768 resolution)
®
Windows -compatible printer (optional), modem (remote connection only) and mouse (i.e.
Mouse, Trackball or Touchpad)
Quick Start Manual
1
Install Daniel MeterLink
2
Install Daniel MeterLink
Software installation
Procedure
1.
Insert the CD in the appropriate drive.
2.
Follow the installation wizard instructions to complete the software installation.
3.
Use the tables below for your operating system.
Make sure you have administrative rights before proceeding. If you are not sure, continue
and the installation program will inform you if you don’t and abort the installation. Consult
your system administrator for assistance.
Note
The Daniel MeterLink installation program is also available for download from the Daniel
Measurement and Control, Inc. website: http://www.daniel.com/um2.htm
Windows® XP installation
®
Install Daniel MeterLink on Windows XP
Start > Run > Browse. Locate directory for Setup.exe> Click OK.
Browse to locate the directory for Setup.exe> Click OK.
®
Windows opens the setup file. Click Next.
Click the radio button to accept the License Agreement terms.
Click Next and select Complete Setup type.
Click Next and follow the instructions on the screen to complete the installation.
Windows® Vista installation
®
Install Daniel MeterLink on Windows Vista
Start > Computer. Locate CD drive containing the disk.
Double-click Setup.exe to begin the installation.
You will receive a message An unidentified program wants access to your computer, select Allow - I
trust this program. I know where it's from or I've used it before.
®
Windows opens the setup file. Follow the instruction on the screen.
Click the radio button to accept the License Agreement terms.
Click Next and select Complete Setup type.
Click Next and follow the instructions on the screen to complete the installation.
2
Daniel MeterLink
Install Daniel MeterLink
Windows® 7 installation
®
Install Daniel MeterLink on Windows 7
Start>All Programs>Accessories>Run.
Browse to locate the directory for Setup.exe> Click OK.
Windows® opens the setup file. Click Next.
Click the radio button to accept the License Agreement terms.
Click Next and select Setup type (Complete setup is recommended).
Click Next and follow the instructions on the screen to complete the installation.
Click Next and follow the instructions on the screen to complete the installation.
Windows® 8 installation
®
Install Daniel MeterLink on Windows 8
Start>All Programs>Accessories>Run.
Browse to locate the directory for Setup.exe> Click OK.
Windows® opens the setup file. Click Next.
Click the radio button to accept the License Agreement terms.
Click Next and select Setup type (Complete setup is recommended).
Click Next and follow the instructions on the screen to complete the installation.
Quick Start Manual
3
Install a direct connection driver
3
Install a direct connection driver
If an Ethernet connection is unavailable, install the standard communications cable
between two computers driver or the Daniel Direct Connection driver.
®
Configure a direct connection on Windows XP
Start>Control Panel > Printers and Other Hardware.
Double-click the Phone and Modem Options icon. If prompted, enter the required data in the Location Information dialog
(country/region, area code, carrier code, number to dial for an outside line, and tone dialing).
Select Modems >ADD (Delete existing drivers for the COM port you want to use.
Select the check box Don't detect my modem; I will select it from a list > click Next.
Select Standard Modem Types (in Manufacturer field).
Select Communications cable between two computers (in Models field) > click Next.
Choose Selected ports (only select the port you want to use to communicate with Daniel MeterLink.)
Click Finish to close the wizard.
The Communications cable between two computers driver now displays in the Modem list.
Click OK to close the dialog. This completes the driver installation.
®
Configure a direct connection on Windows Vista
Start > Control Panel.
Double-click Phone and Modems Options icon. If prompted, enter the required data in the Location Information dialog
(country/region, area code, carrier code, number to dial for an outside line, and tone dialing).
Select Modems>Add (Delete existing drivers for the COM port you want to use.) A message may appear “Windows needs
your permission to continue. Select Continue to proceed.”
Select the check box Don't detect my modem; I will select it from a list > Click Next.
Click Have Disk.
Under Copy manufacturer's files from: enter default installation directory, e.g., C:\Program Files\Daniel\Daniel MeterLink.
Click Browse, if necessary, to search for the Daniel MeterLink installation directory > Click OK.
From the Models field, select Daniel Direct Connection > click Next.
Click Selected ports (only select the port you want to use to communicate with Daniel MeterLink.) > Click Next.
Click Finish to close the wizard.
The Communications cable between two computers driver now displays in the Modem list. Multiple instances of the
driver will appear, if it was installed for multiple COM ports.
Click OK to close the dialog. This completes the driver installation.
4
Daniel MeterLink
Install a direct connection driver
®
Configure a direct connection on Windows 7
Start>Control Panel Select Small icons for View by. Note: If you have a touch screen monitor, swipe from the right edge of the
monitor to display the Start charm.
Click thePhone and Modem icon.
The Phone and Modem Options dialog appears. Select the Modems tab. Click Add to start the installation wizard.
On the first page of the wizard, select the check box “Don't detect my modem; I will select it from a list”. Click Next to
continue.
On the second page of the wizard, select Have Disk.
Enter the installation directory for Daniel MeterLink™ under “Copy manufacturer's files from”: option. The default installation directory is typically C:\Program Files\Daniel\Daniel MeterLink. Click Browse, if necessary to search for the Daniel
MeterLink™ installation directory. Click Daniel Direct Connection. Click Open to continue.
The Add Hardware Wizard displays. Under the Models list, select Daniel Direct Connection and click Next to continue.
Click Selected ports (only select the port you want to use to communicate with Daniel MeterLink) > Click Next.
Click Finish to close the wizard. This completes the driver installation.
®
Configure a direct connection on Windows 8
Start>Control Panel Select Small icons for View by. Note: If you have a touch screen monitor, swipe from the right edge of the
monitor to display the Start charm.
Click thePhone and Modem icon.
The Phone and Modem Options dialog appears. Select the Modems tab. Click Add to start the installation wizard.
On the first page of the wizard, select the check box “Don't detect my modem; I will select it from a list” and click Next to
continue.
On the second page of the wizard, select Have Disk.
™
Enter the installation directory for Daniel MeterLink under “Copy manufacturer's files from”: option. The default installation directory is typically C:\Program Files\Daniel\Daniel MeterLink. Click Browse, if necessary to search for the Daniel
MeterLink installation directory. Click Daniel Direct Connection. Click Open to continue.
The Add Hardware Wizard displays. Under the Models list, select Daniel Direct Connection and click Next to continue.
Click Selected ports (only select the port you want to use to communicate with Daniel MeterLink) > Click Next.
Click Finish to close the wizard. This completes the driver installation.
Quick Start Manual
5
™
Configure the Daniel MeterLink meter directory
4
Configure the Daniel MeterLink™
meter directory
Create a meter directory
If your meter has not previously been configured, Daniel MeterLink will create a meter
directory record named “New Meter” with default settings.
1.
Open the Meter Directory using the File>Meter Directory menu or use the Meter
Directory icon
.
2.
Create a new record by selecting Insert, Insert Duplicate, or Add from the File pull-down
menu.
3.
Enter a meter name, short description, and meter type.
4.
Use the Direct, Modem, Ethernet check boxes for the desired communication
method.
5.
Edit the connection properties for each connection method selected by clicking the
button enabled at the bottom of the dialog.
Note
Daniel MeterLink provides detailed Online Help and context-sensitive help on any page or menu item
activated by pressing F1.
6
Daniel MeterLink
™
Configure the Daniel MeterLink meter directory
Quick Start Manual
7
™
Configure the Daniel MeterLink meter directory
8
Daniel MeterLink
™
Configure the Daniel MeterLink meter directory
Quick Start Manual
9
P/N 3-9000-763
Rev C
2013
Daniel Measurement and Control, Inc.
11100 Brittmoore Park Drive
Houston, TX 77041 USA
T +1 713-467-6000
F +1 713-827-4805
USA Toll Free 1 888-356-9001
Daniel Measurement Services, Inc.
T +1 713-827-6413
www.Daniel.com
Europe: Stirling, Scotland, UK
T +44-1786-433400
Middle East Africa: Dubai, UAE
T +971-4-811-8100
Asia Pacific: Singapore
T +65-677-8211
This product is a core component of the PlantWeb
digital plant architecture.
©2013 Daniel Measurement and Control, Inc., All rights reserved.
The Emerson logo is a trademark and service mark of Emerson
Electric Co. Daniel Measurement and Control, Inc., and Daniel
Measurement Services, Inc., (Daniel) are Emerson Process
Management business units. The Daniel name and logo are
trademarks of Daniel Industries, Inc. The Senior, Junior, Simplex,
MeterLink, SeniorSonic, JuniorSonic, and DanPac are trademarks of
Daniel Industries, Inc. All other trademarks are property of their
respective owners.
Download PDF

advertising