Owner`s manual | Emerson EWC09D5 B, EWC09D5 TV DVD Combo User Manual

OWNER’S
MANUAL
“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”
9-INCH COLOR TV/DVD
EWC09D5
EWC09D5 B
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-256-2487.
Or visit our WEB SITE at http://www.EmersonAudioVideo.com
Please read before using this equipment
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.
Accessoires- Ne placez pas cet appareil sur une table
roulante, un support, un trépied, une console ou une table
instable. Cet appareil risquerait de tomber, pouvant gravement blesser quelqu'un et l'appareil même pourrait être
sérieusement endommagé. N'utilisez qu'une table roulante,
un support, un trépied, une console ou une table recommandé par le fabriquant, ou vendu avec l'appareil. Pour
n'importe quelle installation de l'appareil, on devra suivre
les instructions du fabriquant et l'on devra utiliser les accessoires d'installation recommandés par le fabriquant.
L'ensemble combiné de l'appareil avec une table roulante
devra être déplacé avec précaution. Des arrêts brusques,
une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de
l'appareil/table roulante.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug the unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recommended by
the unit manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this unit near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and
the like.
8.Accessories-Do not place this unit on an unstable cart,
stand, tripod, bracket, or table. The unit may fall, causing
serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the unit.
Any mounting of the appliance
PORTABLE CART WARNING
AVERTISSEMENT POUR UNE
should follow the manufacturer’s
TABLE ROULANTE PORTATIVE
instructions and should use a mounting accessory recommended by the
manufacturer. An appliance and cart
combination should be moved with
care.
Quick stops, excessive force, and
uneven surfaces may cause the appli- S3126A
ance and cart combination to overturn.
9. Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
10.Power Sources-This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other
sources, refer to the operating instructions.
11.Grounding or Polarization-This unit is equipped with a
polarized alternating-current line plug(a plug having one
blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
–2–
EN
F IGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECT RICAL CODE
ANTE NNA
L EAD I N
WI RE
GROUND
CLAMP
A NTENNA
DI SCHARG E UN I T
(NEC SECTION 8 10 -2 0)
EL ECT RI C
SE RV I CE
EQ U I PM EN T
G RO UNDI NG CO NDUCT ORS
(NEC SECTION 8 10 -2 1)
G RO UND CL AM PS
NEC - NATI O NAL EL ECTRI CAL CO DE
POWER SERVI C E G RO UNDI NG
EL EC TR O DE SYST EM
(NEC ART 2 50 , PART H)
S2 8 9 8 A
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
19.Damage Requiring Service-Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the unit, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. (Fig. A)
14.Lightning-For added protection for this unit receiver during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the unit due to lightning and power-line
surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
b. If liquid has been spilled, or objects have fallen into the
unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performancethis indicates a need for service.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.
21.Safety Check-Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safety checks to determine that the unit is in proper operating
condition.
22.Heat-This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
17.Object and Liquid Entry-Never push objects of any kind
into this unit through openings as they may touch dangerous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the
unit.
18.Servicing-Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
–3–
EN
PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
–4–
EN
LOCATION
WARNING
For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:
• Shield it from direct sunlight and keep it away from
sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
• Install the unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving the unit to locations where temperature differences are extreme.
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a unit which has
moisture, it may damage the DVD and the unit.
Therefore when the condensation occurs inside the
unit, turn the unit on and allow at least 2 hours for the
unit to dry out.
SYMBOLS USED IN THIS MANUAL
The following symbols below appear in some headings and notes in this manual, with the following
meanings
TV
: Description refers to TV operation (in the TV mode).
DVD-V
: Description refers to playback of DVD video discs
(in the DVD mode).
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting
•
•
•
CD
: Description refers to playback of audio CDs
(in the DVD mode).
it from an AC wall outlet. Grasp it by the plug.
If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the unit disc
loading tray.
Do not place anything directly on top of the unit.
QUICK
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
SUPPLIED ACCESSORIES
Remote Control Unit
Batteries
Owner’s Manual
Owner’s
Manual
(NE221UD)
Indoor Antenna
(0EMN00723 or
0EMN01183)
2 AA Batteries
Matching Adapter
Car Battery Cord
(1813641 or 1780258
or UCPGANTPK004)
(WPC0202GA001
or WPC0202HHH01)
(1EMN20217)
Carrying Bag
(1EMN20243)
*Only EWC09D5 B
• If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800256-2487.
• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.
–5–
EN
TABLE OF CONTENTS
STEP BY STEP PLAYBACK . . . . . . . . . . . . .20
FAST FORWARD / FAST REVERSE . . . . . . .20
SLOW FORWARD / SLOW REVERSE . . . . .20
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . .5
C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .5
C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C OPERATING CONTROLS AND FUNCTIONS . . .8
INSTALLING THE BATTERIES . . . . . . . . . . .9
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTION . . . . . . . .10
INDOOR ANTENNA . . . . . . . . . . . . . . . . . . .10
CONNECTING TO EXTERNAL INPUT JACKS .11
MOBILE CONNECTION . . . . . . . . . . . . . . . .11
CONNECTING TO A STEREO AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS
(for DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CONNECTING TO A DOLBY DIGITAL
DECODER (for DVD) . . . . . . . . . . . . . . . . . . .13
TV SECTION
C TV OPERATION AND SETTINGS . . . . . . . . .14
SET UP FOR THE FIRST TIME . . . . . . . . . . .14
WATCHING A TV PROGRAM . . . . . . . . . . . .14
PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15
DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .15
CHANNEL RESETTING . . . . . . . . . . . . . . . . .16
MENU LANGUAGE . . . . . . . . . . . . . . . . . . . .17
DVD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .18
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .18
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . .18
C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .21
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .21
TITLE / CHAPTER SEARCH . . . . . . . . . . . . .21
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .21
MARKER SETUP SCREEN . . . . . . . . . . . . . .21
C SPECIAL PLAYBACK FUNCTION . . . . . . . .22
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .22
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .22
C CHANGING THE SETTINGS . . . . . . . . . . . .23
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .23
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .23
STEREO SOUND MODE . . . . . . . . . . . . . . . .23
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .24
BLACK LEVEL SETTING . . . . . . . . . . . . . . .24
VIRTUAL SURROUND . . . . . . . . . . . . . . . . .24
C THE ON-SCREEN INFORMATION . . . . . . .25
C CHANGING THE DVD SETUP ITEMS . . . .26
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . .26
LANGUAGE SETTING . . . . . . . . . . . . . . . .26
DISPLAY SETTING . . . . . . . . . . . . . . . . . . .27
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . .27
PARENTAL CONTROL . . . . . . . . . . . . . . . .28
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . .28
C TROUBLESHOOTING GUIDE . . . . . . . . . . .29
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .31
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .31
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .32
C ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .19
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .19
GENERAL FEATURES . . . . . . . . . . . . . . . . . .19
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .19
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .19
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
–6–
EN
FEATURES
¡Screen saver/Auto power-off functions
TV Mode
The screen saver program starts when there is no input
from the unit for 5 minutes in the stop mode. After the
screen saver program is activated for 15 minutes, the
power automatically turns off.
• 181 channel capability PLL frequency synthesizer tuner with direct station call
(A converter may be necessary to view scrambled
cable channels.)
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
• Infrared remote control
• Trilingual on screen menu display selectable in
¡Selecting a camera angle
English, Spanish, or French
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Sleep Timer
Allows you to have the unit automatically turn off at a
desired time.
¡Choices for audio language and sound mode
You can select the desired audio language and sound mode,
if different languages and modes are available on a disc.
¡Auto Shut Off Function
If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the TV will turn itself off
automatically.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This unit automatically detects if the loaded disc is DVD
or Audio CD.
¡On-screen display
DVD Mode
¡Dolby Digital sound
This unit can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby Digital
decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
¡Random playback for Audio CD
This unit can shuffle the order of tracks to play them in
random order.
¡Program playback for Audio CD
You can program the order of tracks to play them in any
desired order.
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡Search
Chapter search / Title search / Track search / Time search
¡Repeat
Chapter / Title / Track / All / A-B
¡Marker
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which the
play was stopped.
¡Virtual Surround
¡Bit rate indication
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡DRC (Dynamic range control)
You can control the range of sound volume.
NOTE:
• We do not recommend the use of universal remote controls. Not all of the functions may be controlled with
a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer of the universal remote control.
–7–
EN
OPERATING CONTROLS AND FUNCTIONS
[Fig. 1]
FRONT PANEL
[Fig. 3]
REAR VIEW
DC 13.2V
ANT.
VIDEO
L
AUDIO
R
POWER
VOLUME
CHANNEL
STOP
SKIP
PLAY
SKIP
PAUSE
OPEN/CLOSE HEADPHONE
COAXIAL
SEARCH
1 2
3
4
5
6
7 8 9 10 11 12 13 14
37
38
39
40
7. Remote Sensor Window
8. C STOP Button [page 19]
Stops operation of the disc.
REMOTE CONTROL [Fig. 2]
9. H SKIP Button [page 21]
Plays back from the beginning of the current
chapter or track.
OPEN/
POWER PICTURE SELECT CLOSE
E SEARCH Button (Front Panel)
4
13
[page 20]
34
36
During
playback or in the pause mode, press and
1
2
3
hold button down for a few seconds to change
CH.
6
reverse playback speed.
4
5
6
16
10. B PLAY Button [page 19]
7
8
9
Starts playback of the disc contents.
VOL.
SLEEP
+100
5
Hit to change to DVD mode when TV mode.
0
+10
17
SKIP
V.SURR
MUTE
11.
SKIP
G Button [page 21]
9
35
Plays back from the beginning of the next chapter
19
11
or track.
18
10
PLAY
REV
FWD
SEARCH D Button (Front Panel)
STOP
[page 20]
8
DISC
PAUSE SLOW
MENU
During playback or in the pause mode, press and
12
33
hold button down for a few seconds to change forDISPLAY
ward playback speed.
32
ENTER
23
31
SETUP
TITLE
RETURN
12. F PAUSE Button [page 20]
20
30
Pauses the current disc operation.
21
A-B
CLEAR SEARCH MODE REPEAT
13. A OPEN/CLOSE Button [page 19]
29
22
AUDIO SUBTITLE ANGLE
MODE
Hit to insert a disc into or remove it from the tray.
15
28
14. HEADPHONE Jack
27
24
To connect headphone (not supplied) for personal
25
26
listening.
15. MODE Button [pages 22-24]
1. Disc loading tray
Activates program playback or random playback
2. VIDEO input Jack [page 11]
mode when playing CDs.
Connect to the video output jack of a video
16. Number Button
camera or VCR.
TV Mode: [page 14]
3. AUDIO L/R input Jacks [page 11]
Hit two digits to directly access the desired channel.
Connect to the audio output jacks of a video
Remember to hit [0] before a single digit channel.
camera or VCR.
+100 Button–
4. POWER Button [page 14]
Hit to select cable channels which are higher than
Hit to turn the power on and off.
99.
DVD Mode: [page 21]
5. VOLUME (VOL.) K / L Buttons
Hit to enter the desired number.
Press to control the volume level for the DVD and TV.
+10 Button–
6. CHANNEL (CH.) K / L Buttons [page 14]
Hit to enter the desired numbers which are higher
Press to select memorized channel.
than 9.
Press to change to TV mode when in DVD mode.
EN
–8–
17. SLEEP Button [page 15]
Sets the sleep timer.
18. REV h Button [page 20]
Hit to fast reverse the Disc. Hit [PAUSE F], then hit
this button to begin slow motion playback. Hit this
button repeatedly to change the reverse speed of slow
motion.
FWD g Button [page 20]
Hit to fast forward the Disc. Hit [PAUSE F], then
hit this button to begin slow motion playback. Hit
this button repeatedly to change the forward speed
of slow motion.
19. V.SURR (VIRTUAL SURROUND) Button
[page 24]
Hit to set virtual surround on/off.
20. SETUP Button [pages 16, 26-28]
Hit to enter or exit the setup menu of TV or
DVD.
21. TITLE Button [page 19]
Displays the title menu.
22. CLEAR Button [pages 21-22]
Hit to clear or cancel a setting currently entered.
23. DISPLAY Button
TV Mode:
Hit to display the channel number on the screen.
If you hit it again, the channel number will disappear.
DVD Mode: [page 25]
Displays the current status on the TV screen.
24. SEARCH MODE Button [page 21]
Hit to locate a desired point.
25. AUDIO Button [page 23]
Hit to select a desired audio language or sound
mode.
26. SUBTITLE Button [page 23]
Hit to select a desired subtitle language.
27. REPEAT Button [page 22]
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE Button [page 24]
Hit to change the camera angle to see the sequence
being played back from a different angle
(if available).
29. A-B Button [page 22]
Repeats playback of a selected section.
30. RETURN Button [page 21, 24]
Returns to the previous screen in the setup menu.
31. ENTER Button [pages 14, 19]
Hit to accept a setting.
32. K / L / s / B Buttons
TV Mode: [page 14]
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode: [page 19]
Press to select a menu item.
33. DISC MENU Button [page 19]
Calls up the DVD menu.
34. SELECT Button [pages 11, 19]
Hit to change to TV mode, external input mode or
DVD mode.
NOTE: When you select the DVD mode by this
button, press [PLAY O] or [OPEN/CLOSE A]
first. Otherwise, the DVD features are not operated.
35. MUTE Button
Mutes the sound.
(Volume level display turns LIGHT RED from
LIGHT BLUE.)
Hit it again or press [VOL. X / Y] to restore sound.
36. PICTURE Button [page 15]
Hit to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook
to avoid breaking a wire before you connect to
a standard AC outlet.
38. COAXIAL Jack (DVD Audio Only)
Connect to the digital input of an external
amplifier or decoder.
39. ANT(ENNA). Jack
Connect to an antenna, cable system, or satellite
system.
40. DC 13.2V Jack
Connect to the Car Battery Cord.
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing
the cover on the remote unit in the direction of the
arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated
in the battery compartment. Reversed batteries
may cause damage to the device.
• Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
• Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.
EN
–9–
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
Cables used here are commercially available.
[ANTENNA CONNECTION]
[CATV/SATELLITE CONNECTION]
CATV Box or
Satellite Box *
VHF/UHF
75-ohm
Coaxial Cable
OR
DC 13.2V
OUT
VHF
IN
ANT.
From Cable System or
Satellite Antenna
COAXIAL
UHF
VHF
VHF
or
or
UHF
UHF
VHF/UHF
Combiner
ANT.
OR
Adaptor
Flat twinlead cable
75-ohm
Coaxial Cable
From Cable System
[Fig. 4]
*Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
NOTE:
• Before plugging the an antenna into the ANT. jack of the unit, check that the
pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin
into the ANT. jack of the unit.
VHF/UHF COMBINED ANTENNA
A VHF UHF 75 ohm combination antenna can be
connected to ANT. jack of the unit.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
Bent pin
Cable
Plug
(Needs to be straightened)(Straight pin)
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to the unit without a converter box.
CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown above.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the remote control of this unit.
NOTE:
• For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack
before moving the unit.
INDOOR ANTENNA
The Indoor Antenna (supplied) is detachable. Insert the stem of the antenna into the
hole on the upper-back portion of the unit. Connect the Indoor Antenna to the unit
as shown in the diagram. For the best reception, fully extend the Indoor Antenna
and make the necessary adjustments. (Avoid touching the top section when adjusting.)
NOTE:
• The connection of an Indoor antenna may not always give acceptable TV
reception.
Indoor Antenna
(Supplied)
Flat twin-lead cable
ANT.
COAXIAL
ANT.
– 10 –
Matching
Adapter
(Supplied)
DC 13.2V
[Fig. 5]
EN
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the AUDIO/VIDEO output jacks of another source to the AUDIO L/R and
VIDEO jacks of this unit.
Then hit [SELECT] until “AUX” appears on the screen.
AUX
VIDEO
ex.
VCR or video camera, etc.
L
AUDIO
R
POWER
To the Audio output jacks
(OUT)
Audio Cable
(IN)
(commercially available)
VIDEO
L
AUDIO
To the Video output jack
(OUT)
Video Cable
(commercially available)
R
[Fig. 6]
(IN)
NOTE:
• When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural
VCR (another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.
MOBILE CONNECTION
WARNING: The driver should never watch the unit while operating a motor vehicle.
CAUTION:
• When used in moving vehicle, be sure that the unit is secure at all the times to prevent injury.
Consult a professional installer.
• If you use the unit with the vehicle’s engine off, recharge the vehicle’s battery after about every
•
•
•
4 hours of use to prevent it from running down. After you finish using the unit be sure you
unplug the car-battery cord from the cigarette-lighter socket.
Do not use this unit while driving.
Do not leave this unit in a car.
This unit is not designed for use in a car.
To the vehicle's
cigarette-lighter socket
VHF/UHF Combination
Mobile Antenna
(Not supplied)
Car battery cord
(Supplied)
ANT.
DC13.2V
DC 13.2V
ANT.
COAXIAL
1) The supplied indoor antenna is adequate when your
vehicle is stationary. For best reception on the road,
use a high-quality VHF/UHF mobile TV antenna.
2) Attach the car battery cord to the DC13.2V(12V)
connector on the back of the unit. Then, connect the
other end to your vehicle’s cigarette-lighter socket.
NOTES:
• Be sure your vehicle has a 13.2-volt (12-volt), negative-ground electrical system.
• Be sure you use only the supplied car battery cord.
Using another cord could damage the unit.
• Be sure the socket is free of ashes and other debris.
• Be sure to push the car battery cord’s plug completely
into the cigarette-lighter socket.
• Always unplug the car battery from the cigarettelighter socket before you unplug it from the unit.
• You must disconnect the car battery cord from the unit
before you can use the AC power.
• Be sure to replace the fuse with only the same type, 6A, 250V.
EN
– 11 –
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH
DIGITAL INPUT JACKS (for DVD)
Use an audio coaxial digital cable (commercially available) for the audio connections.
Connect to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.
ex.
MD deck, DAT deck, etc.
DC 13.2V
To Coaxial digital
Audio input jack
ANT.
COAXIAL
COAXIAL
(IN)
Audio coaxial digital cable
(commercially available)
(OUT)
To COAXIAL jack
(Only DVD AUDIO OUT)
[Fig. 7]
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner’s Manuals for the components to be connected to the unit.
• Set DOLBY DIGITAL to “OFF” for audio output in the setup mode. Playing a unit using incorrect settings
may generate noise distortion, and may also damage the speakers. (Refer to page 27 to set DOLBY
DIGITAL to “OFF”.)
– 12 –
EN
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a
DOLBY DIGITAL Data stream from its COAXIAL jack. By hooking the unit up to a Dolby Digital decoder,
you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as
enjoyed in movie theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
Front speaker
(left)
Center
speaker
Front speaker
(right)
DC 13.2V
Dolby Digital decoder
(IN)
Surround
speaker
(left)
Surround
speaker
(right)
To Coaxial digital
Audio input jack
(OUT)
ANT.
COAXIAL
COAXIAL
Subwoofer
Audio coaxial
digital cable
(commercially
available)
To COAXIAL jack
(Only DVD AUDIO OUT)
[Fig. 8]
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner’s Manuals for the components to be connected to the unit.
• If connected to a Dolby Digital decoder, set DOLBY DIGITAL to “ON” for audio output in the setup mode.
(Refer to page 27 to set DOLBY DIGITAL to “ON”.)
• Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to “OFF” for audio output in the setup
mode. Playing a unit using incorrect settings may generate noise distortion, and may also damage the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
– 13 –
EN
TV SECTION
TV OPERATION AND SETTINGS
SET UP FOR THE
FIRST TIME
WATCHING A TV PROGRAM
TV
TV
1
1
Plug in the unit power cord
Plug the unit power cord into a standard
AC outlet.
NOTE:
• If some digits appear in the corner of
the screen, hit [POWER] without
unplugging the power cord.
2
2
3
4
Turn on the unit
Select the On Screen Language
– SET UP –
B LANGUAGE
[ENGLISH] ESP
3
FRA
AUTO PRESET
Begin auto preset
– SET UP –
LANGUAGE
[ENGLISH] ESP
Adjust sound
Press [VOL. X / Y] to adjust the volume.
Hit [MUTE] to instantly mute the sound.
Hit it again to restore the previous sound level.
Press [K / L] to point to “AUTO
PRESET”, then hit [ENTER].
The tuner scans and memorizes all
active channels in your area.
NOTES:
• The unit distinguishes between
standard TV channels and cable (CATV) channels.
• The unit may memorize TV channels as CATV
channels if reception condition is poor. If this happens, try “AUTO PRESET” action again when
reception conditions are better. Refer to “CHANNEL RESETTING” on page 16.
FRA
B AUTO PRESET
5
Select the channel number
Press [CH. K / L] to select your desired channel
number or press the Number buttons.
Note for using the Number buttons:
¡When selecting cable channels which are higher
than 99, hit +100 first, then press the last two digits. (Example: to select channel 125, first hit
[+100] then hit [2] and [5]).
¡You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
Hit [POWER] to turn on the unit.
Press [K / L] to point to “LANGUAGE”, then hit [ENTER] to
select “ENGLISH” or
“ESP”=Spanish or “FRA” =French.
“[ ]” indicate the selected language.
Turn on the unit
Hit [POWER] to turn on the unit.
NOTE:
• If you press [CH. K / L] in the
DVD mode, you can change the
TV channels.
Even if you turn off the unit in the
DVD mode, when you turn it on
again, it will go into the TV
mode.
20
TO WATCH CABLE OR SATELLITE
CHANNEL
• If the unit is connected to a cable box or satellite
box, press [CH. K / L] to select CH3 or CH4
according to the output channel setting of the
device, and select desired channel on that device.
After scanning
The tuner stops on the lowest memorized channel.
You can select the desired channel directly with the
Number buttons or [CH. K / L].
NOTE:
• Channel memory programming is NOT needed
when connected to a cable box or satellite box. Just
select the unit channel selector to the output channel of the cable box or satellite box (Ex CH3).
Then select the channel to be viewed on the Cable
Box or Satellite Box.
VOLUME
C CC C C C CCCCCCCCCC
TO WATCH EXTERNAL INPUT
• When an external equipment is connected to the
– 14 –
front AUDIO/VIDEO input jacks, press [SELECT]
or [CH. K / L] repeatedly until “AUX” appears on
the screen.
EN
PICTURE CONTROL
SLEEP TIMER
TV
The unit’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
Make sure ...
• The unit must be turned on.
1
Select “PICTURE CONTROL”
Select item you want to adjust
Press [K / L] until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
BRIGHT
Adjust the picture control
Press [s / B] to adjust to your desired level within
5 seconds.
NOTE:
• At step 3, the picture adjustment display will disappear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step 1.
s
B
BRIGHT
to decrease
to increase
brightness
brightness
CONTRAST
to decrease
to increase
contrast
contrast
COLOR
to pale
to brilliant
TINT
SHARPNESS
to purple
to soft
Call up the Sleep Timer Setting
2
Set sleep time
SLEEP 120 MINUTES
–PPPPPPPCPPPPPPP+
3
1
Hit [SLEEP] so that “SLEEP TIMER” appears.
Hit [SLEEP] repeatedly until your desired sleep time
appears.
Each additional hit will increase the
time by 30 minutes up to 120 minutes.
After 5 seconds, the Sleep Timer
setting will disappear automatically.
Hit [PICTURE].
2
TV
The Sleep Timer function turns off the unit without
using [POWER] after a desired period of time.
NOTE:
• When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
• To confirm the time left for sleep timer, hit
[SLEEP] once and the display appears for 10 seconds.
TO CANCEL THE SLEEP TIMER
Hit [SLEEP] to call up the Sleep Timer Setting. Hit
[SLEEP] repeatedly until “SLEEP 0 MINUTES”
appears.
to green
to clear
• If there is a power failure of any kind, the unit will
retain its memory for this feature.
DEGAUSSING
TV
This television has a degaussing circuit that will clear
up color errors on the TV screen that are caused by
any excess magnetism which happens to get too close
to the TV. This circuit is designed to operate once
when the set is first plugged in. If minor color
errors are seen in some locations on the screen,
please unplug the TV for approximately 30 minutes. When the TV is plugged back in, the degaussing circuit will operate once to clear them up. Repeat
this procedure any time the TV screen is accidentally
magnetized or when the TV is moved or relocated.
– 15 –
EN
ADDING/DELETING CHANNELS
CHANNEL RESETTING
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
TV
Make sure ...
• The unit power must be turned on.
1
RESETTING CHANNELS
1
- TV SETUP -
B CHANNEL SET UP
LANGUAGE [ENGLISH]
Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
Press [K / L] to point to “CHANNEL SET UP”, then hit [ENTER].
2
Select “CHANNEL SET UP”
Hit [SETUP].
Press [K / L] to point to “CHANNEL SET UP”, then hit [ENTER].
- TV SETUP -
B CHANNEL SET UP
LANGUAGE [ENGLISH]
2
Select “ADD/DELETE CH”
Press [K / L] to point to
“ADD/DELETE CH”, then hit
[ENTER].
– CHANNEL SET UP –
B ADD / DELETE CH (TV)
AUTO PRESET
Begin auto preset
Press [K / L] to point to “AUTO PRESET”, then hit
[ENTER].
The tuner scans and memorizes all the active channels in your area.
NOTES:
• The unit distinguishes between standard TV channels and cable(CATV) channels.
• The unit may memorize TV channels as CATV channels if reception conditions is poor. If this
happens, try “AUTO PRESET”
action again when reception conditions are better.
3
Enter the desired channel number
Press [K / L] until your desired
channel number appears (You can
also use the Number buttons or
[CH. K / L] to enter it).
08
ADD / DELETE
– CHANNEL SET UP –
ADD / DELETE CH (TV)
(Example: CH8)
B AUTO PRESET
3
4
Delete (or add) it from (into) memory
Hit [ENTER]. The channel number changes to light
red. The channel is deleted from memory.
After scanning
Added channel: Light blue.
Deleted channel: Light red.
The tuner stops on the lowest memorized channel.
• To delete another channel, repeat steps 3 and 4.
• If you hit [ENTER] again, the channel is memorized again.
5
Exit the channel setup mode
Hit [SETUP] to exit the menu.
NOTE:
• To confirm that channel(s) has been deleted or
added, hit [CH. K / L].
– 16 –
EN
MENU LANGUAGE
TV
1
Select “LANGUAGE”
Hit [SETUP].
Press [K / L] to point to “LANGUAGE”, then hit [ENTER] to
select “ENGLISH” or
“ESPAÑOL”= Spanish or
“FRANÇAIS”= French.
2
- TV SETUP -
CHANNEL SET UP
B LANGUAGE [ENGLISH]
Exit the Language mode
Hit [SETUP] to return to exit the menu.
NOTE:
• This function effects only the language on the
screen menu and not the audio source.
• If Spanish or French is selected accidentally,
1) Hit [SETUP].
2) Press [K / L] to point to “IDIOMA
[ESPAÑOL]” or “LANGAGE” [FRANÇAIS].
3) Hit [ENTER] to select your desired language.
4) Hit [SETUP] to exit the menu.
– 17 –
EN
DVD SECTION
ABOUT THE DISCS
PLAYABLE DISCS
Playable
discs
DVD-Video
Mark (logo)
Region code
Recorded
signals
Disc size
Digital video
(MPEG2)
12 cm
or
8cm
Digital audio
12 cm
or
8cm
Disc types
or
* 1,2,3,10
DVD-RW
DVD-R
-
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
* 1,3,4,5,6
8,9
DVD+RW
DVD+R
-
* 1,3,4,5,7,8,9
Audio CD
* 3,5
CD-RW
CD-R
-
Audio CD
Example
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
* 3,4,5,8,9
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all or
normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with
the DVD recorder. Refer to the manual accompanying the DVD recorder.
*7: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*8: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may not
play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.
*10: The number inside the symbol refers to a region of the world and a disc encoded in a specific region format can only be played back on unit with the same region code.
:This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording Format)
NOTE:
• This player cannot play the DVD-RW that supports CPRM (Contents Protection for Recordable Media).
• This player cannot play the DVD-R discs recorded in VR mode (Video Recording Format).
UNPLAYABLE DISCS
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3
¡ On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
¡ Any other discs without compatibility indications
¡
– 18 –
EN
PLAYING A DISC
BASIC PLAYBACK
DVD-V
GENERAL FEATURES
CD
DVD-V
Getting started
¡Turn on the power of amplifier and any other com-
ponents, if necessary.
1 Hit [POWER].
¡The power will turn on.
2 Hit [OPEN/CLOSE A] to open disc loading
tray.
3 Place the chosen disc in the tray, with the
label facing up.
DVD may contain menus to navigate the disc and access
special features. Press appropriate the Number buttons
or use [K / L / s / B] to highlight your selection in the
DVD main menu and hit [ENTER] to confirm.
NOTES:
¡Select DVD mode by hitting [SELECT]. Then press
[PLAY O] or [OPEN/CLOSE A] before you operate the DVD functions.
¡Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DISC MENU
DVD-V
1 Hit [DISC MENU].
¡The DVD main menu will appear.
2 If the feature is not available,
4 Hit [PLAY O].
¡The tray will close automatically and playback will
symbol
may appear on the TV screen.
then start from the first chapter or track of the disc.
the disc tray manually or hitting
[OPEN/CLOSE A] also starts playback.
¡If the playback does not start automatically, hit
[PLAY O].
¡When you playback a DVD which features a title
menu, it may appear on the screen. In this case, refer
to “TITLE MENU”.
3 If disc menu is available on the disc, audio
¡Closing
language, subtitle options, chapters for the
title and other options will appear for selection.
4 Press [K / L / s / B] to select an item and
hit [ENTER] to confirm selection.
TITLE MENU
5 Hit [STOP C] to stop playback.
NOTES:
¡When the DVD mode has been switched to the TV
mode, the DVD mode shuts down first and then the
TV picture and sound appears in about 4 seconds.
Similarly, when [POWER] is hit to turn off in the
DVD mode, this mode shuts down first and then the
unit’s power is turned off.
¡A “prohibited icon” may appear at
the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc.
¡With DVDs that use titles for playback program signals, playback may start from the second title or it
may skip these titles.
¡During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a malfunction.
DVD-V
1 Hit [TITLE].
¡The title menu will appear.
2 If the feature is not available,
symbol
may appear on the TV screen.
3 Press [K / L / s / B] to select an item and
hit [ENTER] to confirm selection.
CALLING UP A MENU SCREEN
DURING PLAYBACK
¡Hit [DISC MENU] to call up the DVD menu.
¡Hit [TITLE] to call up the title menu.
NOTE:
¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
– 19 –
EN
FAST FORWARD /
FAST REVERSE
RESUME
DVD-V
CD
DVD-V
1 During playback, hit [STOP C].
CD
1 During playback, press
¡Resume message will appear on the TV screen.
[FWD g] or [REV h ].
2 Hit [PLAY O], playback will resume from the
¡“ g 1” or “h 1” appears on the screen.
point at which playback was stopped.
2 To select another speed, repeat step 1 until
¡To cancel resume, hit [STOP C] twice.
¡If the unit is turned off, resume function will be can-
celled.
your required speed appears on the screen.
¡For DVDs, fast forward/reverse search speed is dif-
ferent depending on the disc. Approximate speed is
1 (×2), 2 (×8), 3 (×50) and 4 (×100).
¡For Audio CDs, approximate speed is ×16.
¡When you use buttons on the front panel, press and
hold [SEARCH h / g] for a few seconds.
PAUSE
DVD-V
CD
3 To return to normal playback, hit [PLAY O].
1 During playback, hit [PAUSE F].
¡Playback will pause and sound will be muted.
SLOW FORWARD /
SLOW REVERSE
2 To continue playback, hit [PLAY O].
DVD-V
STEP BY STEP PLAYBACK
1 During playback, hit [PAUSE F].
2 Press [FWD g] or [REV h ].
DVD-V
¡“
1 During playback, hit [PAUSE F].
1” or “
1” appears on the screen.
3 To select another speed, repeat step 2 until
¡Playback will pause and sound will be muted.
your required speed appears on the screen.
¡Slow forward or reverse speed varies with the disc.
2 The disc goes forward by one frame each
Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).
time [PAUSE F] is hit.
¡When you use buttons on the front panel, press and
3 To exit step by step playback, hit [PLAY O].
hold [SEARCH h / g] for a few seconds.
4 To return to normal playback, hit [PLAY O].
– 20 –
EN
SEARCH FUNCTION
TRACK SEARCH
TIME SEARCH
CD
DVD-V
There are three ways to begin playback on an Audio
CD at a specific track.
CD
1 During playback, hit [SEARCH MODE] three
times (CD: twice) to display the Time Search
on the TV screen.
Using the Number buttons
2 Within 30 seconds, enter a desired disc
1 Press the Number buttons to enter the
time using the Number buttons.
desired Track Number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), hit a single number (eg.
track 3, hit [3]).
¡Playback will start at the specified time.
¡Hit [CLEAR] to erase the incorrect input.
¡When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0 - : - -”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
¡To play track 26, hit [+10], [2], [6].
Using [SEARCH MODE]
1 Hit [SEARCH MODE].
¡The Track search display appears.
MARKER SETUP SCREEN
DVD-V
2 Within 30 seconds, select a desired track
number using the Number buttons.
¡For single digits hit [0] first, if the total track of the
disc is more than 10.
CD
Use markers to memorize your favorite places on a
disc.
¡Playback will start at the selected track.
1 Hit [SEARCH MODE] four times (CD: three
Using [SKIP H / G ]
During playback, hit [SKIP G] to move the next
track. Hit it repeatedly to skip subsequent tracks. Hit
[SKIP H ] to go back to beginning of the current
track. Hit it repeatedly to go to the previous tracks.
¡If [SKIP H / G ] is pressed while the playback is
paused, the playback will be paused again after skipping to the next track.
NOTE:
¡[SKIP H / G ] are not operative when playback
is stopped.
times) during playback.
¡The display screen and Markers will appear on the
TV screen.
2 Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,
or 10 and ensure that “- - - - : - - : - -”
appears in the display.
3 When you reach the desired point, hit
[ENTER].
¡The title or track and elapsed playing time will
appear in the TV screen.
TITLE / CHAPTER SEARCH
4 To return to the Marker later, hit [SEARCH
MODE] four times (CD: three times) during
playback and [s / B] to choose the desired
marker, then hit [ENTER].
DVD-V
1 Hit [SEARCH MODE] once for the Chapter
search, twice for the Title search during
playback.
_ /2
2 Enter the desired chapter/title number using
the Number buttons.
¡Playback will start at the selected chapter or title.
¡Hit [CLEAR] to erase the incorrect input.
¡For single digits hit [0] first, if the total chapter or
NOTES:
¡Operations which erase all Markers:
– Opening the disc tray
– Turning off the power
– Hitting [SELECT]
– Selecting “AC” at step 2 and hitting [ENTER]
¡To clear a marker:
– Press [s / B], position the cursor on to the marker number and hit [CLEAR].
¡You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to exit.
title of the disc is more than 10.
– 21 –
EN
SPECIAL PLAYBACK FUNCTION
REPEAT
PROGRAM
REPEAT is available only during playback.
CD
REPEAT TITLE / CHAPTER
DVD-V
1 In stop mode, hit [MODE].
¡The “PROGRAM” screen will appear.
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
OFF
(repeat off)
NOTES:
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
CD
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
TRACK
(current track repeat)
ALL
(entire disc repeat)
OFF
(repeat off)
NOTES:
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during A-B
repeat playback.
A-B REPEAT
2 Press [▲ / ▼] to select a track, then hit
[ENTER].
¡Hit [CLEAR] to erase the
TOTAL 1: 03: 30
most recently entered program.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4 Hit [PLAY O] to play the programmed tracks.
NOTES:
¡While the program is being played back, the STOP
works as follows.
¡Hit [STOP C] once and then [PLAY O] again,
playback will restart from the point where
[STOP C] was hit. (Program continued)
¡Hit [STOP C] twice and then [PLAY O] again,
playback will restart from the track in the usual
way. (Program canceled)
¡Up to 99 tracks can be entered.
¡To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
¡If you like to repeat the current track in the program,
hit [REPEAT] several times until “
TRACK”
appears during playback. If you like to repeat the
entire program hit [REPEAT] several times until
“ ALL” appears during playback.
RANDOM PLAYBACK
DVD-V
CD
CD
1 Hit [A-B] at your chosen starting point.
¡“
You may determine the order in which tracks will play.
This shuffles the playing order of tracks instead of
playback in the sequence.
A-” appears briefly on the TV screen.
2 Hit [A-B] again at your chosen end point.
¡“
A-B” appears briefly on the TV screen, and the
repeat sequence begins.
1 In stop mode, hit [MODE] twice.
¡“RANDOM” screen appears.
RANDOM
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
3 To exit the sequence, hit [A-B].
NOTES:
¡The A-B repeat section can only be set within the
current title (for DVDs) or current track (for Audio
CDs).
¡A-B repeat is not available with some scenes in DVD.
¡To cancel the A point which was set, hit [CLEAR].
¡A-B repeat playback does not function during title,
chapter, track or all repeat playback.
PLAY
2 Hit [PLAY O] to start random playback.
NOTE:
¡If you like to repeat the current track in the random
selection, hit [REPEAT] several times until “
TRACK” appears during playback. If you like to
repeat the entire random selection hit [REPEAT] several times until “ ALL” appears during playback.
EN
– 22 –
CHANGING THE SETTINGS
SUBTITLE LANGUAGE
AUDIO LANGUAGE
DVD-V
DVD-V
The unit allows you to select a language for subtitles
during DVD (if available) playback.
The unit allows you to select a language during DVD
(if multi languages are available) playback.
1 Hit [SUBTITLE] during playback.
¡The subtitle language will be
1.ENG/6
1 Hit [AUDIO] during playback.
1.ENG Dolby D 3/2.1ch 48k/3
displayed on the display bar at
the top of the screen.
2 Hit [AUDIO] repeatedly to select your
2 Hit [SUBTITLE] repeatedly to select your
desired language.
desired subtitle language.
3 To turn off subtitles, hit [SUBTITLE] repeatedly until OFF appears.
NOTES:
¡Some discs allow audio language setting/subtitle
language setting on the disc menu. (Operation varies
between discs, so refer to the manual accompanying
the disc.)
¡If the desired language is not shown after hitting
[SUBTITLE] several times, the disc does not have
subtitles in that language.
¡When “NOT AVAILABLE” appears on the TV
screen, it means no subtitle is
recorded on the scene.
NOTE:
¡Hitting [AUDIO] may not work on some DVDs
with multiple audio languages (e.g. DVDs which
allow audio language setting on the disc menu).
STEREO SOUND MODE
CD
1 Hit [AUDIO] repeatedly during playback to
select between “STEREO”, “L-CH” or “R-CH”.
STEREO
NOT AVAILABLE
¡If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, “---” will be displayed instead.
(Refer to page 26.)
¡STEREO - both right and left channels are active
(stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTE:
¡If the Virtual Surround setting is ON, the sound
mode will be fixed to “STEREO” and can not be
changed.
– 23 –
EN
CAMERA ANGLE
VIRTUAL SURROUND
DVD-V
Some DVDs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the “
” icon appears on the
screen.
DVD-V
CD
You can enjoy surround-sound effect over two speakers on this unit.
1 Press [V.SURR] once or [MODE] twice
(CD: once) during playback.
1 Hit [ANGLE] during playback.
¡If the “ANGLE ICON” setting
OFF
1/8
is “OFF” in the “DISPLAY”
menu, the “
” icon will not
appear. (Refer to page 27.)
2 Hit [ENTER] to set it “1” (Natural effect), “2”
(Emphasized effect) or “OFF”.
3 Press [V.SURR] or [MODE] to exit.
¡You can also exit the menu by hitting [RETURN].
2 Hit [ANGLE] repeatedly to select your
desired angle.
¡The selected angle will be displayed on the display
NOTE (for CD play only):
¡Virtual Surround will not be effective if the sound
mode is set to something other than STEREO.
bar at the top of the screen.
BLACK LEVEL SETTING
DVD-V
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Hit [MODE] during playback.
OFF
2 Hit [ENTER] to switch “ON / OFF”.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
3 Press [MODE] twice or [RETURN] to exit.
NOTE:
¡The setting will be saved even if the unit is turned
off.
– 24 –
EN
THE ON-SCREEN INFORMATION
DVD-V
CD
You can check the information about the current disc by hitting [DISPLAY].
For DVD-Vs
For Audio CDs
1 Hit [DISPLAY] during playback to show current Chapter.
¡The elapsed and remaining
9/49
1 Hit [DISPLAY] during playback to show the
current Track.
¡The elapsed and remaining playing time of the cur-
0:00:00 -0:03:30
playing time of the current
chapter will be displayed.
rent track will be displayed.
2 Hit [DISPLAY] again to show current Title.
¡The elapsed and remaining
1/3 0:00:00 - 1:23:45
Track.
¡The elapsed and remaining playing time of the total
track will be displayed.
1/3
4/12 0:13:45 - 0:45:40
T
0:00:00 - 1:23:45
repeat setting will be displayed.
¡If you are playing a dual layered disc, the layer number will also be displayed (L0: Layer 0 is playing.
L1: Layer 1 is playing).
4 Hit [DISPLAY] again to exit.
T
2 Hit [DISPLAY] again to show current Total
playing time of the current title
will be displayed.
3 Hit [DISPLAY] again.
¡The bit rate and the current
4/12 0:03:21 - 0:02:15
3 Hit [DISPLAY] again to exit.
NOTE:
¡When you are playing a disc in PROGRAM or
RANDOM mode, “ PROGRAM”
(or RANDOM) will be
displayed at step 2.
PROGRAM
– 25 –
EN
CHANGING THE DVD SETUP ITEMS
Language
CUSTOM MENU
DVD-V
You can change the DVD player’s settings.
1 Hit [SETUP] twice in STOP mode so that the
DVD SETUP menu appears.
¡Hit [L] to select “CUSTOM”
SETUP
then hit [ENTER].
QUICK
CUSTOM
INITIALIZE
NOTE:
¡If the menu does not appear, hit [PLAY O] first,
then hit [STOP C]. Make sure the disc is in STOP
mode, then slowly hit [SETUP] twice.
2 Select the desired item.
¡Press [K / L] to select the desired item then hit
[ENTER] to confirm.
Refer to the pages below to set up each item.
SETUP
CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
A
P 26 A
P 27 B
P 27 C
P 28 D
Step 3
Step 3
Step 3
Step 3
LANGUAGE SETTING
Follow steps 1 to 2 in the “CUSTOM MENU” section
above.
3 Press [K / L] to select the desired item then
hit [ENTER].
AUDIO:
Sets the audio language.
AUDIO
SUBTITLE
SUBTITLE:
DISC MENU
Sets the subtitle language.
DISC MENU:
Sets the language for DVD menu.
SETUP
LANGUAGE
ORIGINAL
OFF
ENGLISH
4 Press [K / L] to select a setting then hit
[ENTER].
¡If “OTHER” is selected on the
“AUDIO”, “SUBTITLE” or
“DISC MENU” screen, press
four-digit number to enter the
code for the desired language.
(Refer to the language code
list.)
¡Only the languages supported
by the disc can be selected.
SETUP
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SETUP
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP
Code Language
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
5 Hit [SETUP] to exit the menu.
NOTES:
¡Language Setting for Audio and Subtitle are not
valid for some discs due to default setting of the
disc. In this case, set them by hitting [AUDIO] and
[SUBTITLE]. (Refer to page 23.)
¡If you select a language that is not supported by the
disc, subtitle will automatically be set OFF and the
first item of the audio languages will be automatically set.
Code
L-N
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a language that has a 3 letter language
code, the code will be displayed every time you change
the AUDIO or SUBTITLE language setting above. If
you choose any other languages, ‘---’ will be displayed
instead. (3 letter language code is written in bracket.)
– 26 –
EN
B
C
DISPLAY SETTING
AUDIO SETTINGS
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD
Follow steps 1 to 2 in the “CUSTOM MENU” section on page 26.
Follow steps 1 to 2 in the “CUSTOM MENU” section on page 26.
3 Press [K / L] to select the below items then
3 Press [K / L] to select the below items then
hit [ENTER].
hit [ENTER].
TV MODE: QUICK
¡Press [K / L] for an item
selection, then hit [ENTER].
¡Select “4:3 LETTER BOX”
for black bars to appear on top and bottom of the
screen.
¡Select “4:3 PAN & SCAN” for a full height picture
with both sides trimmed.
¡The default setting is “4:3 LETTER BOX”.
SETUP
DISPLAY
TV MODE
STILL MODE
ANGLE ICON
AUTO POWER OFF
4:3 LETTERBOX
AUTO
ON
ON
STILL MODE:
¡Press [K / L] for an item
selection, then hit [ENTER].
¡Select “AUTO” normally.
¡If you select “FIELD”, the picture in the still mode
will be stabilized.
¡If you select “FRAME”, the picture in the still
mode will be highly defined.
ANGLE ICON:
¡Hit [ENTER] repeatedly to turn Angle icon “ON” or
“OFF”.
¡The default setting is “ON”.
AUTO POWER OFF:
¡Hit [ENTER] repeatedly to turn Auto Power off
“ON” or “OFF”.
¡The default setting is “ON” and the screen saver program starts when there is no input from the unit for 5
minutes in the stop mode. After the screen saver program is activated for 15 minutes, the power is automatically turned off.
SETUP
DISPLAY
TV MODE
STILL MODE
ANGLE ICON
AUTO POWER OFF
4:3 LETTERBOX
AUTO
ON
ON
DRC (Dynamic Range Control):
¡To compress the range of soft
to loud sound.
¡The default setting is “ON”.
SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
ON
DOWN SAMPLING:
¡ON : Output in 48 kHz. (default)
¡OFF : Output the original
sound.
When playing disc with copyright Protection
¡If you select “OFF”, copyright protection will be
activated and sound will be down sampled at 48kHz.
SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DOLBY DIGITAL: QUICK
Set to “ON” when the unit is
connected to a Dolby Digital
Decoder.
¡ON : Output a Dolby Digital signal
(default)
¡OFF : Convert the Dolby Digital to PCM
(2 channel stereo)
SETUP
ON
ON
ON
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
ON
4 Hit [SETUP] to exit the menu.
4 Hit [SETUP] to exit the menu.
TV SETUP MENU IN DVD MODE
¡Language setting for on-screen menus is only available in TV SETUP menu. You can access it by hitting
[SETUP] in DVD mode (Refer to “MENU LANGUAGE” on page 17.
¡“CHANNEL SETUP” menu is not operative in DVD mode although it is displayed on the screen.
Press [SELECT] to move to TV mode first, then follow steps in “CHANNEL RESETTING” on page 16.
– 27 –
EN
D
PARENTAL CONTROL
IF YOU FORGET THE PASSWORD
Parental Control limits the disc viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alternative scenes from being played by your children.
1 Hit the number buttons [4], [7], [3], [7] at
step 3 . Then enter your new password.
¡Password will be cleared and parental level will be
set to “ALL”.
PARENTAL LEVEL
2 Proceed with steps 4 to 6 again.
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s ratings exceed the level you set.
Follow the steps 1 to 2 in the “CUSTOM MENU”
section on page 26.
DVD-V
This allows you to return all selections of SETUP
(except for “PARENTAL” and menu language) to
their default settings.
3 Enter your four-digit password then hit
[ENTER].
SETUP
INITIALIZE
PARENTAL
PASSWORD
1 Hit [SETUP] twice in STOP mode so that the
Enter current password.
“INITIALIZE” menu appears.
2 Press [K / L] to select “INITIALIZE” then hit
4 Press [K / L] to select “PARENTAL LEVEL”
[ENTER].
then hit [ENTER].
SETUP
PARENTAL LEVEL
ALL
PASSWORD CHANGE
3 Select “YES” then hit [ENTER] twice.
5 Press [K / L] to select the desired level
All the settings (except for
“PARENTAL” and menu
language) will be cleared.
¡To cancel the initialization,
select “NO”.
then hit [ENTER].
SETUP
SETUP
QUICK
CUSTOM
INITIALIZE
PARENTAL
PARENTAL
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
SETUP
INITIALIZE
Initialize?
NO
YES
4 Hit [SETUP] to exit the menu.
6 Hit [SETUP] to exit the menu.
NOTES:
¡When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the password.
¡To change the password, press [K / L] to select “PASSWORD CHANGE” at step 4 then hit [ENTER]. Enter
the four-digit password, then hit [ENTER].
¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡Record the password in case you forget it.
CONTROL LEVELS
¡ALL
All parental lock is cancelled.
¡Level 8
DVD software of any grade (adult/general/children)
can be played back.
¡Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
¡Level 1
Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.
– 28 –
EN
TROUBLESHOOTING GUIDE
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the player,
consulting the following checklist.
Problem
No power.
The unit does not respond to
the remote control.
Corrective Action
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
• You have to be within 23 feet of the unit.
• Check if the correct mode is selected. If not switch the mode by hitting [SELECT], whichever you need.
TV Mode
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
Problem
No Picture or Sound
Bars On Screen
Picture Distorted or Blurred
Picture Rolls Vertically
Lines or Streaks in Picture
No Color
Poor Reception on Some Channels
Ghosts in Picture
Weak Picture
Sound OK, Picture Poor
Picture OK, Sound Poor
Different color marks on screen.
Corrective Action
Try
a
new
channel,
if
OK,
then possible station trouble.
•
Make
sure
the
power
is
turned
on.
•
• Hit [SELECT] on the remote control to select TV mode. Then try
other TV feature.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for broken pin of the antenna cable.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust “COLOR” control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust “CONTRAST” & “BRIGHT” control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust “CONTRAST” & “BRIGHT” control.
• Try a new channel, if OK, then possible station trouble.
• Check for local interference.
• Magnetism from nearby appliances and geomagnetism might affect the
color of the TV picture. Move the unit away from the appliances, the
unit can repair itself automatically. If you want to repair immediately,
unplug the unit power cord, then plug it in again 30 minutes or so later.
EN
– 29 –
DVD Mode
Problem
No picture
Disc cannot be played
No sound
No DTS audio is output
Distorted picture
Audio or subtitle language
does not match the set up
The camera angle cannot be
changed
Audio or subtitle language cannot
be changed
“Prohibited icon” appears on the
screen, prohibiting an operation
CD sound dropout
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Corrective Action
• Insert a correct video disc that plays on this unit.
• Hit [SELECT] on the remote control to select DVD mode. Next, press
[PLAY O] or [OPEN/CLOSE A]. Then, try other DVD feature.
• Insert the disc.
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control level.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio. This is not a malfunction.
• There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
• The selected language is not available for audio or subtitles on the
DVD.
This is not a malfunction.
• The DVD does not contain sequences recorded from different camera
angles. This is not a malfunction.
• The DVD does not contain audio source or subtitles in the selected
language. This is not a malfunction.
• That operation is prohibited by the unit or the disc.
This is not a malfunction.
• Scratched disc. Replace the disc with an unscratched one.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
– 30 –
EN
MAINTENANCE
CABINET CLEANING
SERVICING
• Wipe the front panel and other exterior surfaces of
• Should your unit become inoperative, do not try to
•
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed surfaces.
correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power
cord and please call our help line at 1-800-2562487 to locate an Authorized Service Center.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
• If the player still does not perform properly when it is operated while referring to the relevant sections and to
“TROUBLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty.
Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup
unit.
DISC HANDLING
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.
• Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it
is not used.
– 31 –
EN
SPECIFICATIONS
GENERAL SPECIFICATIONS
Sound output:
TV
CRT :
Television system:
Channel coverage:
VHF:
UHF:
CATV:
Tuning System:
Channel access:
ELECTRICAL SPECIFICATIONS
9 inch in-line gun,
90˚ deflection tube
NTSC-M
TV Standard
2 ~ 13
14 ~ 69
2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
OTHER SPECIFICATIONS
Terminals
Antenna input:
Video input:
Audio L/R input:
Headphone:
Coaxial digital
audio output
(only DVD):
Remote control:
Operating
temperature:
Power requirement :
Power consumption :
(Maximum)
Dimensions:
DVD
Discs:
DVD video, Audio CD
Output signal format: NTSC color
2 speakers, 1W, 8 ohm
Weight:
VHF/UHF/CATV
75 ohm unbalanced (F-type)
RCA connector [ 1
RCA connector [ 2
1/8" stereo (3.5 mm)
One pin jack,
500m Vpp (75 ohm)
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
AC 120V/60Hz
DC 13.2V
AC 55W / DC 60W
H:12-1/4" (311mm)
W:10-7/8" (276mm)
D:12-1/2" (318mm)
17.6 lbs. (8.0 kg)
• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will be English.
– 32 –
EN
INDICE
■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 33
PANEL FRONTAL DE LA UNIDAD . . . . . . . . . . . . . . . 33
MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 33
VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 34
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 34
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 34
LA ANTENA INTERIOR . . . . . . . . . . . . . . . . . . . . . . . . 35
CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 35
CONEXIÓN MOVIL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
CONEXIÓN A UN AMPLIFICADOR ESTÉREO
EQUIPADO CON TOMAS DE ENTRADA DIGITAL
(Para DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CONEXCIÓN A UN DECODIFICADOR DOLBY
DIGITAL (Para DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
SECCIÓN DE TV
■ FUNCIONES Y AJUSTES DE TV . . . . . . . . . . . . . . . . . 37
AJUSTES PARA LA PRIMERA VEZ . . . . . . . . . . . . . . . 37
MIRANDO UN PROGRAMA DE TV. . . . . . . . . . . . . . . 37
SECCIÓN DE DVD
■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 38
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 38
MENÚ DE DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
REANUDACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CONTROLES DE
OPERACIÓN Y FUNCIONES
PANEL FRONTAL DE
LA UNIDAD
Consulte la figura 1 de la página 8
MANDO A DISTANCIA
Consulte la figura 2 de la página 8
VISTA POSTERIOR
9. Botón H SKIP
Reproduce desde el inicio del capítulo o canción actual.
Botón h SEARCH (panel frontal)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción hacia atrás.
10. Botón B PLAY
Inicia la reproducción del contenido del disco.
Presione para cambiar a un modo de DVD cuando
esta en el modo de televisor.
11. Botón SKIP G
Reproduce desde el inicio del siguiente capítulo o
canción.
Botón SEARCH g (panel frontal)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción en avance.
12. Botón F PAUSE
Hace una pausa en la operación del disco.
13. Botón A OPEN/CLOSE
Presione para insertar un disco en la bandeja o
retirarlo de ella.
14. Toma HEADPHONE
Para conectar auriculares (no suministrados) y
escuchar en privado.
15. Botón MODE
Activa el modo de reproducción programada o el
modo de reproducción aleatoria cuand se reproducen
CDs.
16. Botones numérios
Modo del televisor:
Presione dos dígitos para tener acceso directamente
al canal deseado.
Recuerde presionar [0] antes de elegir un canal de
un solo dígito.
Botón +100
Presione para seleccionar canales de televisión por
cable cuyo número sea superior a 99.
Modo DVD:
Presione para introducir el número deseado.
Botón +10
Presione para introducir números superiors a 9.
17. Botón SLEEP
Ajusta el temporizador de dormir.
Consulte la figura 3 de la página 8
1. Bandeja de carga del disco
2. Toma de entrada VIDEO
Conecte aquí la toma de salida de vídeo de una
videocámara o de una videograbadora.
3. Tomas de entrada AUDIO L/R
Conecte aquí las tomas de salida de audio de una
videocámara o de una videograbadora.
4. Botón POWER
Presione para encender y apagar la unidad.
5. Botones VOLUME (VOL.) K / L
Presione para controlar el nivel del volumen para el
DVD y el televisor.
6. Botones CHANNEL (CH.) K / L
Presione para seleccionar el canal memorizado.
Presione para cambiar a un modo de televisor
cuando esta en el modo de DVD.
7. Ventanilla del sensor del mando a distancia
8. Botón C STOP
Detiene la operación del disco.
18. Botón REV h
Presione para volver rápidamente en el disco.
Presione [PAUSE k] y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad de
retroceso de la cámara lenta.
Botón FWD g
Presione para avanzar rápidamente en el disco.
Presione [PAUSE k] y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad
de avance de la cámara lenta.
19. Botón V.SURR (envolvente virtual)
Presione para activar/desactivar el envolvente
virtual.
20. Botón SETUP
Presione para entrar o salir del menú de
configuración de televisor o DVD.
21. Botón TITLE
Visualiza el menú de títulos.
– 33 –
ES
22. Botón CLEAR
Para cancelar o borrar un ajuste entrado
actualmente.
23. Botón DISPLAY
Modo del televisor:
Presione para visualizar el número del canal en la
pantalla. Si presiona de nuevo, el número del canal
desaparecerá.
Modo de DVD:
Visualiza el estado actual en la pantalla del
televisor.
24. Botón SEARCH MODE
Presione para localizar un punto deseado.
25. Botón AUDIO
Presione para seleccionar un idioma de audio o un
modo de sonido deseado.
26. Botón SUBTITLE
Presione para seleccionar un idioma de subtítulos
deseado.
27. Botón REPEAT
Repite la reproducción del disco, título, capítulo o
pista actual.
28. Botón ANGLE
Presione para cambiar el ángulo de la cámara y ver,
desde un ángulo diferente, la secuencia que está
siendo reproducida (si existe).
29. Botón A-B
Repite la reproducción de una sección seleccionada.
30. Botón RETURN
Permite volver a la pantalla anterior en el modo de
configuración.
31. Botón ENTER
Presione para establecer un ajuste.
32. Botones K / L / { / B
Modo de televisor:
Presione para seleccionar un modo de ajuste desde
el menú que aparece en la pantalla del televisor.
Presione para seleccionar o ajustar desde un menú
particular.
Modo de DVD:
Presione para seleccionar un ítem de menú.
33. Botón DISC MENU
Muestra menú del DVD.
34. Botón SELECT
Presione para cambiar a un modo de televisor,
modo de entrada externa o modo de DVD.
NOTA: Cuando seleccione el modo DVD con este
botón, Presione primero [PLAY O] u
[OPEN/CLOSE A]. De lo contrario, las funciones
del DVD no se activarán.
35. Botón MUTE
Suprime la salida de sonido. (La visualización del
nivel del sonido cambia de ROJO CLARO a AZUL
CLARO.) Presione este botón de nuevo o
[VOL. m / n] para restaurar el sonido.
36. Botón PICTURE
Presione para entrar en el modo de ajuste de imagen.
37. Cable de alimentación
Conéctelo a una toma de CA convencional (120
V/60 Hz).
38. Toma COAXIAL (DVD Audio solamente)
Conecte a la entrada digital de un amplificador o
decodificador externo.
39. Toma ANT.
Conecte a una antena, sistema de televisión por
cable o sistema de satélite.
40. Toma DC 13,2V
Conecte en el cable de batería del coche.
NOTA: Retire el cable de alimentación del
gancho para evitar romperlo antes de conectarlo a
una toma de CA convencional.
PARA INSERTAR LAS PILAS
1) Abra la cubierta del compartimiento de las pilas
empujando la cubierta del mando a distancia en el
sentido de la flecha.
2) Inserte 2 pilas “AA” en el
compartimiento de las
pilas, en el sentido
indicado por las marcas de polaridad (+/-).
3) Vuelva a poner la cubierta.
[PRECAUCIONES DE LA PILA]
de respetar la polaridad correcta tal
• Asegúrese
como se indica en el compartimiento de pilas. Si
las pilas están invertidas puede provocar daños en
el equipo.
mezcle distintos tipos de pilas al mismo tiempo
• No
(por ejemplo, pilas alcalinas y de carbón cinc) o
pilas nuevas y viejas.
el equipo no se utiliza durante mucho tiempo,
• Si
saque las pilas para evitar daños o heridas de una
posible fuga de pilas.
trate de recargar pilas no diseñadas para recar• No
ga; pueden calentarse excesivamente y romperse.
PREPARACIÓN PARA LA
UTILIZACIÓN
CONEXIONES DE
ANTENA/CABLE
Consulte la figura 4 de la página 10
Nota para el instalador de sistemas CATV
Esta nota tiene la finalidad de llamar la atención del
instalador de sistemas CATV para que tenga en
cuenta el Artículo 820-40 del NEC, el cual
proporciona consejos para hacer una conexión a
tierra apropiada y, en particular, especifica que la
tierra del cable deberá estar conectada al sistema de
puesta a tierra del edificio, tan cerca del punto de
entrada del cable como sea posible.
NOTA:
Antes de enchufar la antena a la toma ANT. de la
unidad, compruebe que la clavija no esté doblada.
Si esta doblada, póngala derecha como se muestra
en la ilustración, y luego conéctela en la toma ANT.
de la unidad.
– 34 –
Clavija doblada
Cable Clavija
(Necesita enderezarse) (Clavija derecha)
ES
NOTA:
• Cuando conecte una videograbadora monofónica
(otra fuente) a esta unidad, conecte la toma de
salida de audio de la videograbadora monofónica
(otra fuente) a la toma AUDIO L de esta unidad. El
audio saldrá igualmente por los canales izquierdo y
derecho.
ANTENA COMBINADA DE VHF/UHF
La antena combinada de VHF/UHF de 75 ohmios
puede conectarse a la toma ANT.
ANTENA SEPARADAS DE VHF/UHF
En algunas zonas será necesario utilizar una antena
exterior.
TELEVISION POR CABLE SIN CAJA DE
CONVERTIDOR / DECODIFICADOR
Utilice esta conexión si su sistema de televisión por
cable se conecta directamente a su unidad sin una
caja de convertidor. Utilice el mando a distancia de la
unidad para seleccionar los canales.
CONEXIÓN MOVIL
ADVERTENCIA: El conductor nunca debe
mirar la unidad mientras conduce un
vehículo.
PRECAUCION:
TELEVISION POR CABLE CON CAJA
DE CONVERTIDOR/DECODIFICADOR
O CAJA DE SATÉLITE
• Cuando se utiliza en un vehículo en
Si su empresa de televisión por cable le suministra
una caja de convertidor, o si usted utiliza un sistema
de satélite, podrá utilizar la conexión básica mostrada
aquí.
La selección de los canales deberá hacerse con la caja
de convertidor o con la caja de satélite. Esto significa
que los canales no se podrán cambiar utilizando el
mando a distancia de la unidad.
NOTA:
• Para su seguridad y para evitar que se dañe
la unidad, desenchufe el cable de antena de la
toma ANT. antes de mover la unidad.
•
•
•
•
LA ANTENA INTERIOR
La antena interior (suministrada) es desmontable.
Inserte el vástago de la antena en el orificio de la
parte posterior superior de la unidad. Conecte la
antena interior a la unidad. Para obtener la mejor
recepción, extienda completamente la antena interior
y luego haga los ajustes necesarios. (Evite tocar la
sección superior cuando haga los ajustes.)
NOTA:
• La conexión de una antena interior puede no dar
siempre una recepción de TV aceptable.
movimiento, cerciórese que la unidad está
asegurada en todo momento para evitar que
sufra heridas. Consulte con un instalador
profesional.
Si utiliza la unidad con el motor del vehículo
parado, vuelva a cargar la batería del
vehículo después de unas 4 horas de uso
para evitar que se agote. Después de
terminar de utilizar la unidad cerciórese de
desenchufar el cable de batería de coche de
la toma del encendedor de cigarrillos.
No utilice esta unidad durante la conducción.
No deje la unidad en un coche.
Esta unidad no fue diseñado para utilizar en
un coche.
1) La antena interior entregada es adecuada cuando
el vehículo está estacionado. Para una mejor
recepción en la calle o carretera, utilice una antena
de TV móvil de VHF/UHF de alta calidad.
2) Enchufe el cable de batería de coche en el conector DC13,2 V (12V) en la parte trasera de la
unidad.
Para la toma del encendedor
de cigarrillos del vehículo.
Antena móvil con
combinación de
VHF/UHF (no entregada)
Consulte la figura 5 de la página 10
CONEXIÓN A TOMAS DE
ENTRADA EXTERNA
Cuando vea un programa grabado en otra fuente
(videograbadora o videocámara), utilice las tomas de
entrada de audio/vídeo de la parte delantera de la
unidad.
Conecte las tomas de salida de audio/vídeo de otra
fuente a las tomas AUDIO L/R y VIDEO de esta
unidad.
Después presione [SELECT] hasta que aparezca
"AUX" en la pantalla.
Cable de batería
de coche
(entregado)
ANT.
DC13.2V
DC 13.2V
ANT.
COAXIAL
Consulte la figura 6 de la página 11
– 35 –
ES
NOTAS:
• Cerciórese que su vehículo tiene un sistema eléctrico con tierra negativa de 13,2 voltios (12 voltios).
• Cerciórese de utilizar sólo el cable de batería de
coche entregado. El uso de otros cables puede
dañar la unidad.
• Cerciórese que la toma está limpia de cenizas y
otros restos.
• Cerciórese de enchufar firmemente el cable de
batería de coche en la toma del encendedor de cigarrillos.
• Desenchufe siempre la batería del coche de la toma
del encendedor de cigarrillos antes de desenchufarlo de la unidad.
• Debe desconectar el cable de batería de coche de la
unidad antes de poder utilizar la electricidad de CA.
• Cerciórese de cambiar el fusible sólo por uno del
mismo tipo, 6A, 250V.
CONEXIÓN A UN
AMPLIFICADOR ESTÉREO
EQUIPADO CON TOMAS DE
ENTRADA DIGITAL (Para DVD)
Utilice un cable digital coaxial de audio (disponible en
el comercio) para hacer las conexiones de audio.
Conecte a un amplificador equipado con tomas de
entrada digital como platina MD o DAT.
Consulte la figura 7 de la página 12
NOTAS:
• La fuente de audio de un disco en un formato de
sonido envolvente Dolby Digital de 5,1 canales no
se puede grabar como sonido digital mediante una
platina MD o DAT.
• Asegúrese de apagar todos los componentes del
sistema antes de conector otro componente.
• Consulte los manuales del propietario de los
componentes que va a conectar a la unidad.
• Ponga DOLBY DIGITAL en “APDO.” para la
salida de audio en el modo de preparación. La
reproducción en una unidad utilizando ajustes
incorrectos puede provocar distorsión por ruido, y
también se pueden dañar los altavoces.
CONEXCIÓN A UN
DECODIFICADOR DOLBY
DIGITAL (Para DVD)
Si utiliza esta unidad para reproducir un disco DVD
en un formato de sonido envolvente Dolby Digital de
5,1 canales, la unidad dará salida a un flujo de datos
DOLBY DIGITAL desde su toma COAXIAL. Si
conecta la unidad a un decodificador Dolby Digital,
podrá disfrutar de una tonalidad más convincente y
real, con un sonido envolvente potente y de alta
calidad similar al de los cines.
Utilice cables digitales coaxiales de audio
(disponibles en el comercio) para hacer las
conexiones de audio.
Consulte la figura 8 de la página 13
NOTAS:
• Asegúrese de apagar todos los componentes del
sistema antes de conector otro componente.
• Consulte los manuales del propietario de los
componentes que vaya a conectar a la unidad.
• Si conecta un decodificador Dolby Digital, ponga
DOLBY DIGITAL en “ENC.” para la salida de
audio en el modo de preparación.
• A menos que se haga la conexión a un
decodificador Dolby Digital, ponga DOLBY
DIGITAL en “APDO.” para la salida de audio en el
modo de preparación. La reproducción en la unidad
utilizando ajustes incorrectos puede generar
distorsión de ruido, y también puede estropear los
altavoces.
Fabricado bajo licencia de Dolby
Laboratories. “Dolby” y el símbolo de la D
doble son marcas de fábrica de Dolby
Laboratories.
– 36 –
ES
MIRANDO UN PROGRAMA DE TV
SECCIÓN DE TV
TV
FUNCIONES Y AJUSTES
DE TV
1 Encienda la unidad
Presione [POWER] para encender la unidad.
AJUSTES PARA LA PRIMERA VEZ
2 Seleccione el número de canal
TV
1 Enchufe el cable eléctrico
Enchufe el cable de alimentación de la unidad en una
toma de CA.
NOTA:
• Si aparecen algunos dígitos en la esquina de la
pantalla, presione [POWER] sin desenchufar el
cable de la alimentación.
2 Encienda la unidad
Presione [POWER] para encender la unidad.
Presione [CH. K / L] para seleccionar su número de
canal o presione los botones numéricos.
Nota para el uso de los botones numéricos:
¡Cuando seleccione los canales de cable que sean
más altos que 99, presione primero [+100] y presione las últimas dos cifras. (Ejemplo: para seleccionar el canal 125, primero presione [+100] y
después presione [2] y [5]).
¡Debe colocar un cero antes de los números de
canal de una cifra. (Por ejemplo: 02, 03, 04, etc.)
3 Ajuste el sonido
3 Seleccione el idioma de la pantalla
Presione [K / L] para apuntar a “LANGUAGE”.
Luego, Presione [ENTER] para seleccionar
“ENGLISH” = inglés o “ESP” = español o “FRA” =
francés. “[ ]” indica el idioma seleccionado.
4 Inicie el preajuste automático
Presione [K / L] para apuntar a
“AUTOPRESELECCION”. Luego, presione
[ENTER]. El sintonizador explora y memoriza todos
los canales activos de su zona.
NOTAS:
• La unidad distingue entre los canales de TV
estándar y los canales de televisión por cable
(CATV).
• La unidad puede memorizar canales de TV como
canales de CATV si las condiciones de la recepción
no son buenas. Si pasa esto, vuelve a intentar la
acción “AUTOPRESELECCION” cuando las
condiciones de la recepción sean mejores.
Presione [VOL. X / Y] para ajustar el volumen.
Presione [MUTE] para silenciar inmediatamente el
sonido.
Vuelva a pulsar nuevamente para recuperar el nivel
de sonido anterior.
NOTA:
• Si presiona [CH. K / L] en el
modo DVD, puede cambiar los
canales de TV.
Incluso si apaga la unidad en el
C CC C C C
modo DVD, cuando vuelve a
encender, volverá al modo de TV.
VOLUMEN 20
CCCCCCCCCC
PARA VER CANALES DE CABLE O
SATELITE
• Si la unidad está conectada a una caja de cable o
caja de satélite, presione [CH. K / L] para seleccionar CH3 o CH4 de acuerdo con el ajuste de
canal de salida del equipo y seleccione el canal
deseado en ese equipo.
PARA VER LA ENTRADA EXTERNA
• Cuando hay un equipo conectado a las tomas de
5 Tras la exploración
El sintonizador se detiene en el canal memorizado más
bajo. Puede seleccionar el canal deseado directamente
con los botones numéricos o [CH. K / L].
NOTA:
• NO es necesaria la programación de memoria de
canal cuando se conecta a una caja de cable o caja
de satélite. Sólo seleccione el selector de canal de
la unidad al canal de salida de la caja de cable o
caja de satélite (por ejemplo, CH3) y seleccione el
canal a ver en la caja de cable o caja de satélite.
– 37 –
entrada AUDIO/VIDEO delanteras, presione repetidamente [SELECT] o [CH. K / L] hasta que
aparezca “AUX” en la pantalla.
ES
SECCIÓN DE DVD
REPRODUCCIÓN DE UN
DISCO
REPRODUCCIÓN BÁSICA
DVD-V
CD
Para empezar
¡Conecte el interruptor del amplificador y otros
equipos, si fuera necesario.
1 Presione [POWER].
¡La alimentación se conectará.
2 Presione [OPEN/CLOSE A].
¡La bandeja de carga del disco se abrirá.
3 Ponga el dlsco en la bandeja con el lado de
la eliguta hacia arriba.
NOTAS:
¡Cuando se cambió el modo de DVD al modo de
TV, el modo de DVD se desactiva primero y
aparece la imagen y sonido de TV después de unos
4 segundos. De la misma forma, cuando se pulsa
[POWER] para apagar en el modo de DVD, este
modo se desactiva primero y después se apaga la
electricidad.
¡Puede aparecer un “icono
prohibitivo” en la esquina superior derecha de la pantalla de TV
durante el funcionamiento,
avisándole que hubo una
operación prohibida en el DVD o el disco.
¡Con los DVD que utilizan títulos para las señales
de programa de reproducción, la reproducción
puede empezar del segundo título o puede saltar
estos títulos.
¡Durante la reproducción de un disco de dos capas,
las imágenes pueden parar durante un momento.
Esto se produce cuando la 1º capa cambia a la 2º
capa. Esto no es una avería.
MENÚ DE DISCO
DVD-V
1 Presione [DISC MENU].
¡Aparecerá el menú principal de DVD.
4 Presione [PLAY O].
¡La bandeja se cerrará automáticamente y la repro-
2 Si no existe la función, puede aparecer el
símbolo
ducción comenzará desde el primer capítulo o pista
del disco.
¡La reproducción también empieza cerrando manualmente la bandeja del disco o presionando
[OPEN/CLOSE A].
¡Si la reproducción no comienza automáticamente,
presione [PLAY O].
¡Cuando reproduzca un DVD que tenga grabado un
menú de títulos, el menú podrá aparecer en la
pantalla.
en la pantalla de TV.
3 Si existe un menú de disco en el disco, el
idioma de audio, opciones de subtítulos,
capítulos para el título y otras opciones
aparecerán para su selección.
4 Presione [K / L / s / B] para seleccionar un
ítem y presione [ENTER] para confirmar la
selección.
REANUDACIÓN
5 Presione [STOP C] para detener
la reproducción.
DVD-V
CD
1 Durante la reproducción, presione
[STOP C].
¡Aparecerá el mensaje de continuación en la pantalla
de TV.
2 Presione [PLAY O], la reproducción continuará desde el punto en el que se paró la
reproducción.
¡Para cancelar la continuación, presione dos veces
[STOP C].
¡Si se apaga la unidad, se cancelará la función de con-
tinuación.
– 38 –
ES
MEMO
– 39 –
ES
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does
not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE
PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN
THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest FUNAI Authorized Service Center or for general service procedure, please
call or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-256-2487
http://www.EmersonAudioVideo.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in Malaysia
1EMN20217
TD300UA ★★★★★
Download PDF

advertising