Owner`s manual | Emerson EWC1901 TV VCR Combo User Manual

OWNER’S
MANUAL
“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”
COLOR TV/DVD
EWC20D5 A (20 inch)
SUPPLIED ACCESSORIES
Remote Control Unit
Batteries
Owner’s Manual
Owner's Manual
INSTRUCCIONES
EN ESPAÑOL INCLUIDAS.
NE221UD
2 AA Batteries
1EMN20223
If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-256-2487.
Or visit our WEB SITE at http://www.emersonaudiovideo.com
Please read before using this equipment
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.
Accessoires- Ne placez pas cette unit sur une table
roulante, un support, un trépied, une console ou une table
instable. Cette unit risquerait de tomber, pouvant gravement
blesser quelqu'un et l'appareil même pourrait être sérieusement endommagé. N'utilisez qu'une table roulante, un support, un trépied, une console ou une table recommandé par
le fabriquant, ou vendu avec la unit. Pour n'importe quelle
installation de l'appareil, on devra suivre les instructions du
fabriquant et l'on devra utiliser les accessoires d'installation
recommandés par le fabriquant. L'ensemble combiné de
l'appareil avec une table roulante devra être déplacé avec
précaution. Des arrêts brusques, une force excessive et des
surfaces inégales peuvent provoquer le renversement de
l'ensemble combiné de l'appareil/table roulante.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug unit from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recommended by
the unit manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this unit near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and
the like.
8.Accessories-Do not place this unit on an unstable cart,
stand, tripod, bracket, or table. The unit may fall, causing
serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the unit.
Any mounting of the appliance
PORTABLE CART WARNING
AVERTISSEMENT POUR UNE
should follow the manufacturer’s
TABLE ROULANTE PORTATIVE
instructions and should use a mounting accessory recommended by the
manufacturer. An appliance and cart
combination should be moved with
care.
Quick stops, excessive force, and
uneven surfaces may cause the appli- S3126A
ance and cart combination to overturn.
9. Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
10.Power Sources-This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other
sources, refer to the operating instructions.
11.Grounding or Polarization-This unit is equipped with a
polarized alternating-current line plug(a plug having one
blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
–2–
EN
F IGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECT RICAL CODE
ANTE NNA
L EAD I N
WI RE
GROUND
CLAMP
A NTENNA
DI SCHARG E UN I T
(NEC SECTION 8 10 -2 0)
EL ECT RI C
SE RV I CE
EQ U I PM EN T
G RO UNDI NG CO NDUCT ORS
(NEC SECTION 8 10 -2 1)
G RO UND CL AM PS
NEC - NATI O NAL EL ECTRI CAL CO DE
POWER SERVI C E G RO UNDI NG
EL EC TR O DE SYST EM
(NEC ART 2 50 , PART H)
S2 8 9 8 A
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
19.Damage Requiring Service-Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the unit, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. (Fig. A)
14.Lightning-For added protection for this unit receiver during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the unit due to lightning and power-line
surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
b. If liquid has been spilled, or objects have fallen into the
unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performancethis indicates a need for service.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.
21.Safety Check-Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safety checks to determine that the unit is in proper operating
condition.
22.Heat-This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
17.Object and Liquid Entry-Never push objects of any kind
into this unit through openings as they may touch dangerous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the
unit.
18.Servicing-Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
–3–
EN
PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to service this device, due to possible eye injury.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
–4–
EN
LOCATION
SYMBOLS USED IN THIS MANUAL
For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:
• Shield it from direct sunlight and keep it away from
sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top bottom of the unit. Do not place the unit on a
carpet because this will block the ventilation holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving unit to locations where temperature
differences are extreme.
The following symbols below appear in some headings and notes in this manual, with the following
meanings
TV
: Description refers to TV operation (in the TV mode).
DVD-V
: Description refers to playback of DVD-Video discs
(in the DVD mode).
CD
: Description refers to playback of Audio CDs
(in the DVD mode).
QUICK
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting
•
•
•
it from an AC wall outlet. Grasp it by the plug.
If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the unit disc
loading tray.
Do not place anything directly on top of the unit.
WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a unit which has
moisture, it may damage the DVD and unit.
Therefore when the condensation occurs inside the
unit, turn POWER on and allow at least 2 hours for
the unit to dry out.
–5–
EN
TABLE OF CONTENTS
FAST FORWARD / FAST REVERSE . . . . . . .21
SLOW FORWARD / SLOW REVERSE . . . . .21
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . .5
C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C OPERATING CONTROLS AND FUNCTIONS . . .8
INSTALLING THE BATTERIES . . . . . . . . . . .9
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTIONS . . . . . . .10
CONNECTING TO EXTERNAL INPUT JACKS .11
CONNECTING TO AN AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS,
MD DECK OR DAT DECK (for DVD only) . .11
CONNECTING TO A DOLBY DIGITAL
DECODER (for DVD) . . . . . . . . . . . . . . . . . . .12
TV SECTION
C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .13
SELECTING THE LANGUAGE . . . . . . . . . . .13
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . .13
DELETING (OR ADDING) CHANNEL(S) . . .14
C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .15
WATCHING A TV PROGRAM . . . . . . . . . . . .15
DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15
PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .16
CLOSED CAPTION SYSTEM . . . . . . . . . . . .16
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .17
TV RATING SET UP . . . . . . . . . . . . . . . . . .17
MPAA RATING SET UP . . . . . . . . . . . . . . .18
CHANGE ACCESS CODE . . . . . . . . . . . . . .17
DVD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .19
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .19
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . .19
C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .22
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .22
TITLE / CHAPTER SEARCH . . . . . . . . . . . . .22
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .22
MARKER SETUP SCREEN . . . . . . . . . . . . . .22
C SPECIAL PLAYBACK FUNCTION . . . . . . . .23
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23
C CHANGING THE SETTINGS . . . . . . . . . . . .24
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .24
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .24
STEREO SOUND MODE . . . . . . . . . . . . . . . .24
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .25
BLACK LEVEL SETTING . . . . . . . . . . . . . . .25
VIRTUAL SURROUND . . . . . . . . . . . . . . . . .25
C THE ON-SCREEN INFORMATION . . . . . . .26
C CHANGING THE DVD SETUP ITEMS . . . .27
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . .27
LANGUAGE SETTING . . . . . . . . . . . . . . . .27
DISPLAY SETTING . . . . . . . . . . . . . . . . . . .28
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . .28
PARENTAL CONTROL . . . . . . . . . . . . . . . .29
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . .29
C TROUBLESHOOTING GUIDE . . . . . . . . . . .30
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .32
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .32
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .33
C ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .20
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .20
GENERAL FEATURES . . . . . . . . . . . . . . . . . .20
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .20
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .20
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
STEP BY STEP PLAYBACK . . . . . . . . . . . . .21
–6–
EN
FEATURES
TV Mode
DVD Mode
• 181 channel capability PLL frequency synthesiz•
•
er tuner with direct station call
(A converter may be necessary to view scrambled cable
channels.)
Infrared remote control
Trilingual on screen menu display selectable in
English, Spanish or French
¡Dolby Digital sound
This unit can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby Digital
decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
¡Random playback for Audio CD
¡Sleep Timer
The Sleep Timer function enables you to shut off the power
without hitting [POWER] after a desired time period.
This unit can shuffle the order of tracks to play them in
random order.
¡Program playback for Audio CD
¡Closed Caption Decoder
You may view specially labeled (cc) TV programs, movies,
news, etc. with either a dialogue caption or text display
added to the program.
You can program the order of tracks to play them in any
desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto Shut Off Function
If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the unit will turn itself off
automatically.
¡Screen saver/Auto power-off functions
The screen saver program starts when there is no input
from the unit for 5 minutes in the stop mode. When the
screen saver program is activated for 15 minutes, the
power is automatically turned off.
¡V-CHIP
Enables parents to prevent their children from watching
inappropriate material on TV.
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound mode,
if different languages and modes are available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This unit automatically detects if the loaded disc is DVD,
Audio CD on disc.
¡On-screen display
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡Search
Chapter search / Title search / Track search / Time search
¡Repeat
Chapter / Title / Track / All / A-B
¡Marker
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which the
play was stopped.
¡Virtual Surround
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
–7–
EN
OPERATING CONTROLS AND FUNCTIONS
[Fig. 1]
FRONT PANEL
VIDEO
L–AUDIO–R
POWER
VOLUME
CHANNEL
STOP
SKIP
PLAY
SKIP
PAUSE
OPEN/
CLOSE
– SEARCH –
HEADPHONE
1
2
POWER PICTURE SELECT
16
1
2
3
4
5
6
7
8
9
11
10
SKIP
OPEN/
CLOSE
CH.
6
VOL.
5
V.SURR
MUTE
PLAY
DISC
MENU
SLOW
12
8
33
DISPLAY
ENTER
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
AUDIO
ANGLE
32
31
30
29
MODE
15
24
25
35
19
18
FWD
STOP
SETUP
7 8 9 10111213 14
9. SKIP H Button [page 22]
Plays back from the beginning of the current
chapter or track.
SEARCH h Button (Front Panel)
[page 21]
During playback or in the pause mode, press and
hold button down for a few seconds to change
reverse playback speed.
10. PLAY O Button [page 20]
Starts playback of the disc contents.
Hit to change to DVD mode when TV mode.
+10
REV
23
20
21
22
6
7. Remote Sensor Window
8. STOP C Button [page 21]
Stops operation of the disc.
9
0
PAUSE
5
13
34
+100
SLEEP
17
4
[Fig. 2]
REMOTE CONTROL
4
36
3
SUBTITLE
28
27
26
1. Disc loading tray
2. VIDEO input Jack [page 11]
Connect to the video output jack of a video
camera or VCR.
3. AUDIO L/R input Jacks [page 11]
Connect to the audio output jacks of a video
camera or VCR.
4. POWER Button [page 13]
Hit to turn the power on and off.
5. VOLUME K/L (VOL. m/n) Buttons [page 15]
Press to control the volume level for the DVD and TV.
6. CHANNEL K/L (CH. K/L) Buttons [page 15]
Press to select memorized channel.
Press to change to TV mode when DVD mode.
11. SKIP G Button [page 22]
Plays back from the beginning of the next chapter
or track.
SEARCH g Button (Front Panel)
[page 21]
During playback or in the pause mode, press and
hold button down for a few seconds to change forward playback speed.
12. PAUSE F Button [page 21]
Pauses the current disc operation.
13. OPEN/CLOSE A Button [page 20]
Hit to insert a disc into or remove it from the tray.
14. HEADPHONE Jack
To connect headphone (not supplied) for personal
listening.
15. MODE Button [pages 23-24]
Activates program playback or random playback
mode when playing CDs.
16. Number Buttons
TV Mode: [page 14]
Hit two digits to directly access the desired channel.
Remember to hit [0] before a single digit channel.
+100 Button
Hit to select cable channels which are higher than 99.
DVD Mode: [page 22]
Hit to enter the desired number.
+10 Button
Hit to enter the desired numbers which are higher
than 9.
–8–
EN
REAR VIEW
[Fig. 3]
COAXIAL
37
17. SLEEP Button [page 16]
Hit to display the sleep timer and start the function.
The shut off time can be determined by the number
of times you hit this button. (0, 30, 60, 90 or 120
minutes)
18. REV h Button [page 21]
Hit to fast reverse the Disc. Hit [PAUSE F], then
hit this button to begin slow motion playback. Hit
this button repeatedly to change the reverse speed of
slow motion.
FWD g Button [page 21]
Hit to fast forward the Disc. Hit [PAUSE F], then
hit this button to begin slow motion playback. Hit
this button repeatedly to change the forward speed
of slow motion.
19. V.SURR (VIRTUAL SURROUND) Button
[page 25]
Hit to set virtual surround on/off.
20. SETUP Button [pages 13, 27-29]
Hit to enter or exit the setup menu of TV or DVD.
21. TITLE Button [page 20]
Displays the title menu.
22. CLEAR Button [pages 22-23]
Resets a setting.
23. DISPLAY Button
TV Mode:
Hit to display the channel number on the screen. If
you hit it again, the channel number will disappear.
DVD Mode: [page 26]
Displays the current status on the TV screen.
24. SEARCH MODE Button [page 22]
Hit to locate a desired point.
25. AUDIO Button [page 24]
Hit to select a desired audio language or sound
mode.
26. SUBTITLE Button [page 24]
Hit to select a desired subtitle language.
27. REPEAT Button [page 23]
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE Button [page 25]
Hit to change the camera angle to see the sequence
being played back from a different angle (if available).
29. REPEAT A-B Button [page 23]
Repeats playback of a selected section.
30. RETURN Button [page 22]
Returns to the previous screen in the setup menu.
31. ENTER Button [pages 13, 20]
Hit to accept a setting.
ANT.
38 39
32. K / L / { / B Buttons
TV Mode: [page 13]
Hit to select a setting mode from the menu on the
TV screen.
Hit to select or adjust from a particular menu.
DVD Mode: [page 20]
Press to select a menu item.
33. DISC MENU Button [page 20]
Displays the menus in the DVD.
34. SELECT Button [page 20]
Hit to change to TV mode, external input mode or
DVD mode.
NOTE: When you select the DVD mode by this
button, press [PLAY O] or [OPEN/CLOSE A]
first. Otherwise, the DVD features are not operated.
35. MUTE Button [page 15]
Hit to turn off the sound portion of the TV program.
(Volume level display turns LIGHT RED from
LIGHT BLUE.) Hit it again or hit [VOL. m / n] to
restore sound.
36. PICTURE Button [page 15]
Hit to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to
a standard AC outlet.
38. COAXIAL digital audio out Jack (DVD Audio
Only) [pages 11, 12]
Connect to the digital input of an external
amplifier or decoder.
39. ANT(ENNA). Jack
Connect to an antenna, cable system or satellite system.
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
NOTES:
¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.
–9–
EN
PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Satellite Box or
Cable Box
OUT
(Not supplied)
IN
VHF/UHF Antenna
(Not supplied)
From Cable System or
Satellite Dish
VHF Antenna
(Not supplied)
UHF Antenna
(Not supplied)
From
Cable System
COAXIAL
or
75-ohm Coaxial
Cable (Not supplied)
VHF/UHF
or Combiner
(Not supplied)
ANT.
ANT.
or
Flat twin-lead cable
[Fig. 4]
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Bent pin
NOTE:
Before plugging the antenna into the ANT. jack of the unit, check that the
pin is not bent. If it is bent, straighten the pin as illustrated, then plug the
pin into the ANT. jack of the unit.
VHF/UHF COMBINED ANTENNA
Cable Plug
(Needs to be straightened)(Straight pin)
CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITE BOX
A VHF UHF 75 ohm combination antenna can be
connected to ANT. jack.
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown here.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the TV/ DVD Remote Control.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your unit without a converter box. Use the
TV/ DVD Remote Control to select channels.
TO VIEW A SCRAMBLED/UNSCRAMBLED
CHANNEL
1.Set the unit channel selector to the output channel
of the Cable Converter Box or Satellite Box. (Ex.
CH3)
2.Select the channel to view on your Cable Converter
Box or Satellite Box.
NOTE:
• For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack
before moving the unit.
– 10 –
EN
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on another
source (VCR or video camera), use the audio/video
input jacks on the front of the unit.
Connect the audio/video output
jacks of another source to the
AUX
AUDIO L/R and VIDEO jacks of
this unit. Then hit [SELECT] until
"AUX" appears on the screen.
NOTE:
• When you connect a monaural VCR (another
source) to this unit, connect the Audio output jack
of the monaural VCR (another source) to the
AUDIO L jack of this unit. The audio will output in
both L and R channel equally.
[Front of the unit]
To the
[Another source] audio output jacks
VIDEO
To the video
output jack
L–AUDIO–R
etc.
Audio/Video
cables
(not supplied)
[Fig. 5]
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
COAXIAL
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(Only DVD AUDIO OUT)
ANT.
[Fig. 6]
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the unit.
• Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a unit using incorrect settings
may generate noise distortion and may also damage the speakers. (See page 28 to set DOLBY DIGITAL to
OFF.)
– 11 –
EN
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a
DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby
Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround
sound as enjoyed in movie theaters.
Use audio coaxial digital cables available at retail for the audio connections.
Front speaker
(left)
Center
speaker
Dolby Digital decoder
Surround
speaker
(left)
Front speaker
(right)
COAXIAL
To COAXIAL DIGITAL
AUDIO INPUT jack
Surround
speaker
(right)
ANT.
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(Only DVD AUDIO OUT)
Subwoofer
[Fig. 7]
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the unit.
• If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
(See page 28 to set DOLBY DIGITAL to ON.)
• Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup
mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
– 12 –
EN
TV SECTION
SET UP FOR USE
CHANNEL SET UP
SELECTING THE LANGUAGE
TV
TV
1
You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the unit channel selector to the output
channel of the cable box or satellite box (Ex CH3),
then select the channel to be viewed on the Cable
Box or Satellite Box.
Plug in the unit power cord
Plug the unit power cord into a standard
AC outlet.
NOTE:
• If any digits appear in the corner of
the screen, hit [POWER] without
unplugging the power cord.
Make sure ...
• Hit [POWER] to turn on the unit.
NOTE:
• This function effects only the language on the
screen menu and not the audio source.
2
Select “LANGUAGE”
Hit [SETUP] on the remote control.
K/L
L] to point to “LANPress [K
GUAGE”.
Make sure ...
• Hit [POWER] to turn on the unit.
1
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
2
3
Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using [ENTER].
4
Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
K/L
L] to point to “CHANPress [K
NEL SET UP”.
Then hit [ENTER].
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Begin auto ch programming
K/L
L] to point to “AUTO CH
Press [K
PROGRAMMING”.
Then hit [ENTER].
The tuner scans and memorizes all
the active channels in your area.
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO CH PROGRAMMING
Exit the Language mode
Hit [SETUP] to return to TV mode.
NOTE: If for some reason the menu is in Spanish or
K/L
L] to point to “IDIOMA
French, press [K
[ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then
hit [ENTER], then hit [SETUP] on the remote control.
3
After scanning
The tuner stops on the lowest memorized channel.
• When AUTO CH PROGRAMMING is activated where there is
no TV signal input, “NO TV
SIGNALS” will appear on the
display after the completion of
the channel scanning.
• The unit may recognize CATV channels to be TV
channels by the receiving conditions. In this case,
try auto ch programming again in the fine receiving conditions.
– 13 –
NO TV SIGNALS
EN
DELETING (OR ADDING)
CHANNEL(S)
TV
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1
Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
K /L
L] to point to “CHANPress [K
NEL SET UP”.
Then hit [ENTER].
2
Select “ADD/DELETE CH”
K /L
L] to point to
Press [K
“ADD/DELETE CH”.
Hit [ENTER].
3
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
Enter the desired channel number
K /L
L] until your desired
Press [K
channel number appears. (You can
08
also press the number buttons or
L] to enter it)
[CH. K /L
(Example: CH8)
• You must precede single-digit
channel numbers with a zero (Example: 02 ... 09).
• When selecting cable channels which are higher
than 99, hit +100 first, then hit the last two digits.
(Example: to select channel 125, first hit +100,
then press 2 and 5).
ADD / DELETE
4
Delete (or add) it from (or into) memory
Hit [ENTER]. The channel number changes to light
red. The channel is deleted from memory.
• To delete another channel, repeat steps [3] to [4].
• If you hit [ENTER] again, the channel is memorized again.
Added channel: Light blue
Deleted channel: Light red
5
Exit the channel setup mode
Hit [SETUP] to return to TV mode.
NOTE: To confirm that channel(s) has been deleted
L].
or added, press [CH. K /L
– 14 –
EN
TV OPERATION
WATCHING A TV PROGRAM
PICTURE CONTROL
TV
1
TV
Turn on the unit
Hit [POWER] to turn on the unit.
2
Select the channel number
L] to select your desired channel numPress [CH. K/L
ber or press the number buttons.
Notes for using the number buttons on the remote
control:
• You must precede single-digit channel numbers
with a zero (Example: 02 ... 09).
• When selecting cable channels which are higher
than 99, hit +100 first, then press the last two digits. (Example: to select channel 125, first hit +100,
then press 2 and 5).
Remember:
¡If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4, then the
channel to be viewed must be selected on the cable
box or satellite box.
The unit’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
Make sure ...
• unit power must be turned on.
1
Select “PICTURE CONTROL”
Hit [PICTURE] on the remote control.
2
Select item you want to adjust
K/L
L] until desired control is displayed.
Press [K
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
BRIGHT
–PPPPPPPCPPPPPPP+
3
Adjust sound
Y] to adjust the volPress [VOL. X/Y
ume.
3
VOLUME
20
C CC C C C CCCCCCCCCC
NOTE:
L] in the DVD mode, you can
• If you press [CH. K/L
change the TV channels.
Even if you turn off the unit in the DVD mode,
when you turn it on again, it will go into the TV
mode.
Adjust the picture control
Press [s / B] to adjust to your desired level within 5
seconds.
NOTE:
• At step 3, the picture adjustment display will disappear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step 1.
COLOR
s
to decrease
brightness
to decrease
contrast
to pale
B
to increase
brightness
to increase
contrast
to brilliant
TINT
SHARPNESS
to purple
to soft
to green
to clear
BRIGHT
DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this unit away from the appliance. If the color is still not correct, disconnect
power cord from AC outlet then reconnect it after
30 minutes.
CONTRAST
• If there is a power failure of any kind, the unit will
retain its memory for this feature.
– 15 –
EN
SLEEP TIMER
TV
The Sleep Timer function enables you to shut off the power
without hitting [POWER] after a desired time period.
1
Make sure ...
• unit power must be turned on.
Set “SLEEP TIMER”
Hit [SLEEP] on the remote control.
You may change the sleep time
with hitting [SLEEP] repeatedly.
The timer is set up to 120 minutes,
30 minutes each time SLEEP is
pressed.
NOTE:
If the unit displays a black box on
the TV screen, this means that the
unit is set to the TEXT mode. To
clear screen, select [CAPTION1],
[CAPTION2] or [OFF].
1
SLEEP 120 MINUTE
Select “CAPTION”
Hit [SETUP] on the remote control.
K / L] to point to “CAPPress [K
TION”.
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
To cancel the sleep timer:
Hit [SLEEP] repeatedly until “SLEEP 0 MINUTE”
is displayed.
NOTES:
• When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
• To view the time left for sleep timer, hit [SLEEP]
once when SLEEP display disappears. After 10
seconds, display will disappear again.
2
Hit [ENTER] until your desired caption menu
appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
CLOSED CAPTION SYSTEM
TV
You can view specially labeled (cc) TV programs,
movies, news, etc. with either a dialogue caption or
text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news while captioning
the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can
watch half screen text information if you want.
1-2: You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is used,
usually for a second language if available.
Select your desired caption menu
3
Exit the caption setting mode
Hit [SETUP] to return to TV mode.
NOTE:
• Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
TO CANCEL THE CLOSED CAPTION
SYSTEM
Repeat steps 1 to 2, select [OFF] using ENTER. Hit
[SETUP] on the remote control to return to TV
mode.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
• Automobile ignition noise
• Electric motor brush noise
• Weak snowy reception on TV screen
• Multiplex signal reception displaying picture
ghosts or airplane flutter.
– 16 –
EN
V-CHIP SET UP
TV
V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels and Emergency Broadcast
System signals), then denies access to programming
if the program’s rating meets the limitations you
select. In this case, “PROTECTED PROGRAM by
...” message appears on the TV screen.
To block ratings, follow the steps below.
• Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).
V-CHIP SET UP
Make sure ...
• The unit must be turned on.
1
Select “V-CHIP SET UP”
Hit [SETUP].
Press [K / L] to select “V-CHIP
SET UP”, then hit [ENTER].
- TV SETUP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Selection
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
Rating Category Explanations
Appropriate for all children
Appropriate for children seven and older
General Audience
Parental Guidance suggested.
Unsuitable for children under 14
TV-MA
Mature audience only
NOTE:
• When you select a rating and set
it to [BLOCK], the higher ratings
will be blocked automatically.
The lower ratings will be available for viewing.
• When you set the lowest rating to
[VIEW], all other ratings will automatically be
available for viewing.
5
TV–Y
TV–Y7 (
)
B TV–G
TV–PG (DLSV)
TV–14 (DLSV)
TV–MA ( LSV)
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
TV–Y
B TV–Y7 (
TV–G
TV–PG (
TV–14 (
TV–MA (
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
Setting “Sub-Ratings”
When you select the ratings of TVY7, TV-PG, TV-14 or TV-MA you
will have the option of setting sub
rating categories.
Press [K / L] to select a rating with
sub-ratings you wish to block, then
hit [ENTER] twice.
Press [K / L] to select a sub-rating,
then hit [ENTER] to set it to
[BLOCK] or [VIEW].
)
)
)
)
TV–Y7
B FV
TV–PG
2
Enter Access code
ACCESS CODE
Press the Number buttons to
enter the access code.
• For the first time set-up or in
the event the unit has lost
power, enter the default code of 0000.
3
B D
L
S
V
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
_ _ _ _
Select the desired item
Press [K / L] to select “TV RATING”, “MPAA
RATING” or “CHANGE CODE”, then hit [ENTER].
Refer to the pages below to set up each item.
P 17 A Step 4
P 18 B Step 4
P 18 C Step 4
Selection
Rating Category Explanations
TV-Y7
FV
Fantasy Violence
TV-PG, TV-14, TV-MA
D
Suggestive Dialog (TV-PG, TV-14 only)
L
Coarse Language
S
Sexual Situation
V
Violence
– V-CHIP SET UP –
B
A
TV RATING
MPAA RATING
CHANGE CODE
TV RATING SET UP
6
Follow steps 1 to 3 in the “V-CHIP SET UP” section above.
4
NOTE:
• The blocked sub-ratings will
appear next to the rating category
in the “TV RATING” menu.
Blocking TV programs
Press [K / L] to select a rating
that you wish to block.
Hit [ENTER] repeatedly to set it
to [BLOCK] or [VIEW].
B TV–Y
TV–Y7 (
TV–G
TV–PG (
TV–14 (
TV–MA (
)
)
)
)
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
TV–Y
TV–Y7 (
)
TV–G
B TV–PG (DLSV )
TV–14 (DLSV )
TV–MA ( LSV )
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
NOTE:
• To change the rating, the TV must
be turned to an unprotected program. If “PROTECTED PROGRAM by ...” appears on the screen, please change
the channel to a station that is not protected.
PROTECTED PROGRAM
by TV-Y
– 17 –
EN
B
C
MPAA RATING SET UP
Follow steps 1 to 3 in the “V-CHIP SET UP” section
on page 17.
4
Selection
G
PG
PG-13
R
4
G
PG
PG–13
B R
NC–17
X
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
NC-17
Rating Category Explanations
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
X
Mature audience only
• When you select a rating and set it to [BLOCK],
•
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
When you set the lowest rating to [VIEW], all
other ratings will automatically be available for
viewing.
5
Follow steps 1 to 3 in the “V-CHIP SET UP” section on page 17.
Select your desired item
Press [K / L] to point to your
desired item, then hit [ENTER] to
select [BLOCK] or [VIEW].
CHANGE ACCESS CODE
Enter New code
Press the Number buttons to
enter your desired access code in
the “NEW CODE” space, then
enter the same code in the “CONFIRM CODE” space. When completed, the menu will return to “V-CHIP SET UP”.
• Make sure you enter exactly the same new code in
the “CONFIRM CODE” space as one in the
“NEW CODE” space. If they are different, the
“NEW CODE” space is cleared for redoing.
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
5
Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
NOTE:
• Your personal access code will be erased and will
return to the default (0000) when a power failure
occurs or when you turn off the power using a
wall switch. If you have forgotten the code, unplug
the power cord for 10 seconds to restore the access
code to 0000.
Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
– 18 –
EN
DVD SECTION
ABOUT THE DISCS
PLAYABLE DISCS
Playable
discs
DVD-Video
Mark (logo)
Recorded
signals
Disc size
Digital video
(MPEG2)
12 cm
or
8cm
Digital audio
12 cm
or
8cm
Region code
Disc types
or
* 1,2,3,10
DVD-RW
DVD-R
-
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
* 1,3,4,5,6
8,9
DVD+RW
DVD+R
-
* 1,3,4,5,7,8,9
Audio CD
* 3,5
CD-RW
CD-R
-
Audio CD
Example
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
* 3,4,5,8,9
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all or
normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with
the DVD recorder. Refer to the manual accompanying the DVD recorder.
*7: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*8: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may not
play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.
*10: The number inside the symbol refers to a region of the world and a disc encoded in a specific region format can only be played back on unit with the same region code.
:This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording Format)
NOTE:
• This player cannot play the DVD-RW that supports CPRM (Contents Protection for Recordable Media).
• This player cannot play the DVD-R discs recorded in VR mode (Video Recording Format).
UNPLAYABLE DISCS
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3
¡ On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
¡ Any other discs without compatibility indications
¡
– 19 –
EN
PLAYING A DISC
BASIC PLAYBACK
DVD-V
GENERAL FEATURES
CD
DVD-V
Getting started
¡Turn on the power of amplifier and any other com-
ponents, if necessary.
1 Hit [POWER].
¡The power will turn on.
2 Hit [OPEN/CLOSE A] to open disc loading
tray.
3 Place the chosen disc in the tray, with the
label facing up.
DVD may contain menus to navigate the disc and access
special features. Press appropriate the number buttons
s/B
B] to highlight your selection in the DVD
or [K/L/s
main menu and hit [ENTER] to confirm.
NOTES:
¡Select DVD mode by hitting [SELECT] on the
remote control. Then hit [PLAY O] or
[OPEN/CLOSE A] before you operate the DVD
functions.
¡Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DISC MENU
DVD-V
1 Hit [DISC MENU] on the remote control.
¡The DVD main menu will appear.
4 Hit [PLAY O].
¡The tray will close automatically and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, hit
[PLAY O].
¡When you playback a DVD which features a title
menu, it may appear on the screen. In this case, refer
to “TITLE MENU”.
2 If the feature is not available,
symbol
may appear on the TV screen.
3 If disc menu is available on the disc, audio
language, subtitle options, chapters for the
title and other options will appear for selection.
4 Press [K/L/s / B] to select an item and hit
5 Hit [STOP] to stop playback.
[ENTER] to confirm selection.
NOTES:
¡When the DVD mode has been switched to the TV
mode, the DVD mode shuts down first and then the
TV picture and sound appears in about 4 seconds.
Similarly, when POWER is pressed to turn off in the
DVD mode, this mode shuts down first and then the
unit’s power is turned off.
¡A “prohibited icon” may appear at
the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc.
¡With DVDs that use titles for playback program signals, playback may start from the second title or it
may skip these titles.
¡During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a malfunction.
TITLE MENU
DVD-V
1 Hit [TITLE] on the remote control.
¡The title menu will appear.
2 If the feature is not available,
symbol
may appear on the TV screen.
3 Press [K/L/s / B] to select an item and hit
[ENTER] to confirm selection.
CALLING UP A MENU SCREEN
DURING PLAYBACK
¡Hit [DISC MENU] to call up the DVD menu.
¡Hit [TITLE] to call up the title menu.
NOTE:
¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
EN
– 20 –
FAST FORWARD /
FAST REVERSE
RESUME
DVD-V
CD
DVD-V
1 During playback, hit [STOP C].
CD
1 During playback, press [FWD g] or
¡Resume message will appear on the TV screen.
[REV h ].
2 Hit [PLAY O], playback will resume from the
¡“ g 1” or “h 1” appears on the screen.
point at which playback was stopped.
2 To select another speed, repeat step 2 until
¡To cancel resume, hit [STOP C] twice.
¡If unit is turned off, resume function will be can-
¡For DVDs, fast forward/reverse search speed is dif-
celled.
your required speed appears on the screen.
ferent depending on the disc. Approximate speed is
1 (×2), 2 (×8), 3 (×50) and 4 (×100).
¡For Audio CDs, approximate speed is ×16.
¡When you press buttons on the front panel, press and
hold [SEARCH h / g] for a few seconds.
PAUSE
DVD-V
CD
3 To return to normal playback, hit [PLAY O].
1 During playback, hit [PAUSE F].
¡Playback will pause and sound will be muted.
SLOW FORWARD /
SLOW REVERSE
2 To continue playback, hit [PLAY O].
DVD-V
STEP BY STEP PLAYBACK
1 During playback, hit [PAUSE F].
DVD-V
2 Press [FWD g] or [REV h ].
¡“
1 During playback, hit [PAUSE F].
1” or “
1” appears on the screen.
3 To select another speed, repeat step 2 until
¡Playback will pause and sound will be muted.
your required speed appears on the screen.
2 The disc goes forward by one frame each
¡Slow forward or reverse speed varies with the disc.
time [PAUSE F] is pressed.
3
Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).
To exit step by step playback, hit [PLAY O].
¡When you press buttons on the front panel, press
and hold [SEARCH h / g] for a few seconds.
4 To return to normal playback, hit [PLAY O].
– 21 –
EN
SEARCH FUNCTION
TRACK SEARCH
TIME SEARCH
CD
DVD-V
There are three ways to begin playback on an Audio
CD at a specific track.
CD
1 During playback, hit [SEARCH MODE] three
times (CD: twice) to display the Time Search
on the TV screen.
Using the number buttons on the remote control
2 Within 30 seconds, enter a desired disc
1 Press the number buttons to enter the
time using the number buttons.
desired track number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, hit [3]).
¡Playback will start at the specified time.
¡Hit [CLEAR] to erase the incorrect input.
¡When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0 - : - -”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
¡To play track 26, hit [+10], [2], [6].
Using SEARCH MODE
MARKER SETUP SCREEN
1 Hit [SEARCH MODE].
¡The Track search display appears.
DVD-V
CD
2 Within 30 seconds, select a desired track
number using the number buttons.
¡For single digits hit [0] first, if the total track of the
Use markers to memorize your favorite places on a
disc.
disc is more than 10.
1 Hit [SEARCH MODE] four times (CD: three
¡Playback will start at the selected track.
times) during playback.
Using SKIP H / G
During playback, hit [SKIP G] to move the next
track. Hit it repeatedly to skip subsequent tracks. Hit
[SKIP H] to go back to beginning of the current
track. Hit it repeatedly to go to the previous tracks.
¡If [SKIP H / G] is pressed while the playback is
paused, the playback will be paused again after skipping to the next track.
NOTE:
¡[SKIP H / G] are not operative when playback
is stopped.
¡The display screen and Markers will appear on the
TITLE / CHAPTER SEARCH
4 To return to the Marker later, hit [SEARCH
TV screen.
2 Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,
or 10 and ensure that “- - - - : - - : - -”
appears in the display.
3 When you reach the desired point, hit
[ENTER].
¡The title or track and elapsed playing time will
appear in the TV screen.
MODE] four times (CD: three times) during
s / B] to choose the desired
playback and [s
marker, then hit [ENTER].
DVD-V
1 Hit [SEARCH MODE] once for the Chapter
search, twice for the Title search during
playback.
_/2
2 Enter the desired chapter/title number using
the number buttons.
NOTES:
¡Opening the disc tray, turning off the power hitting
[SELECT], or selecting AC at step 2 and hitting
[ENTER] will erase all Markers.
s / B] to select a cursor
¡To clear a marker, press [s
on to the marker number to be cleared and hit
[CLEAR].
¡You can mark up to 10 points.
¡Playback will start at the selected chapter or title.
¡Hit [CLEAR] to erase the incorrect input.
¡For single digits hit [0] first, if the total chapter or
5 Press [SEARCH MODE] or [RETURN] to
exit.
title of the disc is more than 10.
– 22 –
EN
SPECIAL PLAYBACK FUNCTION
REPEAT
PROGRAM
CD
REPEAT is available only during playback.
REPEAT TITLE / CHAPTER
You may determine the order in which tracks will play.
DVD-V
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
OFF
(repeat off)
NOTES:
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
CD
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
TRACK
(current track repeat)
ALL
(entire disc repeat)
OFF
(repeat off)
NOTES:
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during repeat AB playback.
REPEAT A-B
DVD-V
2 Press [▲ / ▼] to select a track, then hit
[ENTER].
¡Hit [CLEAR] to erase the
TOTAL
most recently entered program.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4 Hit [PLAY O] to play the programmed tracks.
NOTES:
¡While the program is being played back, the STOP
works as follows.
¡Hit [STOP C] once and then [PLAY O] again,
playback will restart from the point where STOP
was pressed. (Program continued)
¡Hit [STOP C] twice and then [PLAY O] again,
playback will restart from the track in the usual way.
(Program canceled)
¡Up to 99 programs can be entered.
¡To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
¡If you like to repeat the current track in the program,
hit [REPEAT] repeatedly until “
TRACK”
appears during playback. If you like to repeat the
entire program hit [REPEAT] repeatedly until “
ALL” appears during playback.
RANDOM PLAYBACK
CD
CD
1 Hit [REPEAT A-B] at your chosen starting
point.
¡“
1 In stop mode, hit [MODE].
¡The PROGRAM screen will appear.
A-” appears briefly on the TV screen.
2 Hit [REPEAT A-B] again at your chosen end
This shuffles the playing order of tracks instead of
playback in the sequence.
1 In stop mode, hit [MODE] twice.
¡RANDOM screen appears.
RANDOM
CD-DA
point.
¡“
A-B” appears briefly on the TV screen, and the
repeat sequence begins.
TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
PLAY
3 To exit the sequence, hit [REPEAT A-B].
NOTES:
2 Hit [PLAY O] to start random playback.
¡The repeat A-B section can only be set within the
NOTE:
current title (for DVDs) or current track (for Audio
¡If you like to repeat the current track in the random
CDs).
selection, hit [REPEAT] repeatedly until “
¡Repeat A-B is not available with some scenes in DVD.
TRACK” appears during playback. If you like to
¡To cancel the A point which was set, hit [CLEAR].
repeat the entire random selection hit [REPEAT]
¡Repeat A-B playback does not function during title,
repeatedly until “ ALL” appears during playback.
chapter, track or all repeat playback.
EN
– 23 –
CHANGING THE SETTINGS
SUBTITLE LANGUAGE
AUDIO LANGUAGE
DVD-V
DVD-V
The unit allows you to select a language for subtitles
during DVD disc (if available) playback.
The unit allows you to select a language during DVD
disc (if multi languages are available) playback.
1 Hit [SUBTITLE] during playback.
¡The subtitle language will be
1.ENG/6
1 Hit [AUDIO] during playback.
1.ENG Dolby D 3/2.1ch 48k/3
displayed on the display bar at
the top of the screen.
2 Hit [AUDIO] repeatedly to select your
2 Hit [SUBTITLE] repeatedly to select your
desired language.
desired subtitle language.
3 To turn off subtitles, hit [SUBTITLE] repeatedly until OFF appears.
NOTES:
¡Hitting [SUBTITLE] may not work on some DVDs
with multiple subtitle languages. In this case, set it
on the disc menu. (Operation varies between discs.
Refer to the manual of the disc.)
¡If the desired language is not shown after hitting
[SUBTITLE] several times, the disc does not have
subtitles in that language.
NOT AVAILABLE
¡When “NOT AVAILABLE”
appears on the TV screen, it
means no subtitle is recorded
on the scene.
¡If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 27.)
NOTE:
¡Hitting [AUDIO] may not work on some DVDs
with multiple audio languages (e.g. DVDs which
allow audio language setting on the disc menu).
STEREO SOUND MODE
CD
1 Hit [AUDIO] repeatedly during playback to
select between STEREO, L-CH or R-CH.
STEREO
¡STEREO - both right and left
channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTE:
¡If the Virtual Surround setting is ON, the sound mode
will be fixed to STEREO, and can not be changed.
– 24 –
EN
CAMERA ANGLE
VIRTUAL SURROUND
DVD-V
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the (
) icon appears on the
screen.
DVD-V
CD
You can enjoy surround-sound effect over two speakers on this unit.
1 Press [V.SURR] once or [MODE] twice
(CD: once) during playback.
1 Hit [ANGLE] during playback.
OFF
¡If the “ANGLE ICON” set-
1/8
ting is “OFF” in the DISPLAY SETTING menu, the
(
) icon will not appear. (Refer to page 28.)
2 Hit [ENTER] to set it 1 (Natural effect) or 2
(Emphasized effect) or OFF.
3 Press [V.SURR] or [MODE] to exit.
2 Hit [ANGLE] repeatedly to select your
desired angle.
¡The selected angle will be displayed on the display
You can also exit the menu by hitting [RETURN].
NOTE (for CD play only):
¡Virtual Surround will not be effective if the sound
mode is set to something other than STEREO.
bar at the top of the screen.
BLACK LEVEL SETTING
DVD-V
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Hit [MODE] during playback.
OFF
2 Hit [ENTER] to switch ON/OFF.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
3 Press [MODE] twice or [RETURN] to exit.
NOTE:
¡The setting will be saved even if the unit is turned
off.
– 25 –
EN
THE ON-SCREEN INFORMATION
DVD-V
CD
You can check the information about the current disc by hitting [DISPLAY].
For DVD-Vs
For Audio CDs
1 Hit [DISPLAY] during playback to show current Chapter.
current Track.
¡The elapsed and remaining
¡The elapsed and remaining
playing time of the current
chapter will be displayed.
9/49
3 Hit [DISPLAY] again.
¡The bit rate and the current
1/3
T
2 Hit [DISPLAY] again to show current Total
Track.
¡The elapsed and remaining
0:00:00 - 1:23:45
4/12 0:13:45 - 0:45:40
T
playing time of the total track
will be displayed.
T
3 Hit [DISPLAY] again to exit.
L1
repeat setting will be displayed.
¡If you are playing a dual layered disc, the layer number will also be displayed (L0: Layer 0 is playing.
L1: Layer 1 is playing).
4 Hit [DISPLAY] again to exit.
4/12 0:03:21 - 0:02:15
playing time of the current
track will be displayed.
0:00:00 -0:03:30
2 Hit [DISPLAY] again to show current Title.
¡The elapsed and remaining
playing time of the current
title will be displayed.
1 Hit [DISPLAY] during playback to show the
NOTE:
¡When you are playing a disc in PROGRAM or RANDOM mode, “ PROGRAM (or RANDOM)” will
be displayed at step 2.
PROGRAM
– 26 –
EN
CHANGING THE DVD SETUP ITEMS
Language
CUSTOM MENU
DVD-V
You can change the DVD player’s settings.
1 Hit [SETUP] twice in STOP mode so that the
DVD SETUP menu appears.
¡Hit [L] to select
SETUP
“CUSTOM”then hit [ENTER].
QUICK
CUSTOM
INITIALIZE
NOTE:
¡If the menu does not appear, hit [PLAY O], [STOP
C]. Then slowly hit [SETUP] twice.
2 Select the desired item.
¡Press [K / L] to select the desired item then hit
[ENTER] to confirm.
Refer to the pages below to set up each item.
SETUP
CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
A
P 27 A
P 28 B
P 28 C
P 29 D
Step 3
Step 3
Step 3
Step 3
LANGUAGE SETTING
Follow steps 1 to 2 in the “CUSTOM MENU” section
above.
3 Press [K / L] to select the desired item then
hit [ENTER].
AUDIO:
Sets the audio language.
SUBTITLE:
Sets the subtitle language.
DISC MENU:
Sets the language for DVD menu.
SETUP
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
4 Press [K / L] to select a setting then hit
[ENTER].
¡If “OTHER” is selected on
the “AUDIO”, “SUBTITLE”
or “DISC MENU” screen,
press four-digit number to
enter the code for the desired
language. (Refer to the language code list.)
¡Only the languages supported
by the disc can be selected.
SETUP
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SETUP
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP
Code Language
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
5 Hit [SETUP] to exit the menu.
NOTES:
¡Language Setting for Audio and Subtitle are not
valid for some discs due to default setting of the
disc. In this case, set them by hitting [AUDIO] and
[SUBTITLE]. (Refer to page 24.)
¡If you select a language that is not supported by the
disc, subtitle will automatically be set OFF, and first
item of the audio languages will be automatically set.
Code
L-N
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a language that has a 3 letter language
code, the code will be displayed every time you change
the AUDIO or SUBTITLE language setting above. If
you choose any other languages, ‘---’ will be displayed
instead. (3 letter language code is written in bracket.)
– 27 –
EN
B
C
DISPLAY SETTING
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
Follow steps 1 to 2 in the “CUSTOM MENU” section on page 27.
3 Press [K / L] to select the below items then
AUDIO SETTINGS
Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD
discs.
Follow steps 1 to 2 in the “CUSTOM MENU” section on page 27.
3 Press [K / L] to select the below items then
hit [ENTER].
TV MODE: QUICK
TV MODE
4:3 LETTERBOX
¡Press [K / L] for an item
STILL MODE
AUTO
ANGLE ICON
ON
selection, then hit [ENTER].
AUTO POWER OFF ON
¡Select “4:3 LETTER BOX”
for black bars to appear on top and bottom of the
screen.
¡Select “4:3 PAN & SCAN” for a full height picture
with both sides trimmed.
¡The default setting is “4:3 LETTER BOX”.
SETUP
STILL MODE:
TV MODE
4:3 LETTERBOX
¡Press [K / L] for an item
STILL MODE
AUTO
ANGLE ICON
ON
selection, then hit [ENTER].
AUTO POWER OFF ON
¡Select “AUTO” normally.
¡If you select “FIELD”, the picture in the still mode
will be stabilized.
¡If you select “FRAME”, the picture in the still
mode will be highly defined.
SETUP
hit [ENTER].
DISPLAY
DISPLAY
ANGLE ICON:
¡Hit [ENTER] repeatedly to turn Angle icon “ON” or
“OFF”.
¡The default setting is “ON”.
DRC (Dynamic Range Control):
¡To compress the range of soft
to loud sound.
¡The default setting is “ON”.
SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
ON
DOWN SAMPLING:
DRC
ON
¡ON : Output in 48 kHz.
DOWN SAMPLING
ON
DOLBY DIGITAL
ON
(default)
¡OFF : Output the original
sound.
When playing disc with copyright Protection
¡If you select “OFF”, copyright protection will be
activated and sound will be down sampled at 48kHz.
SETUP
AUDIO
DOLBY DIGITAL: QUICK
DRC
ON
Set to “ON” when the unit is
DOWN SAMPLING
ON
DOLBY
DIGITAL
ON
connected to a Dolby Digital
Decoder.
¡ON: Output a Dolby Digital signal (default)
¡OFF: Convert the Dolby Digital to PCM
(2 channel stereo)
AUTO POWER OFF:
¡Hit [ENTER] repeatedly to turn Auto Power off
“ON” or “OFF”.
¡The default setting is “ON” and the screen saver program starts when there is no input from the unit for
5 minutes in the stop mode. After the screen saver
program is activated for 15 minutes, the power is
automatically turned off.
SETUP
AUDIO
4 Hit [SETUP] to exit the menu.
4 Hit [SETUP] to exit the menu.
TV SETUP MENU IN DVD MODE
• Language setting for on-screen menus is only available in TV SETUP menu. You can access it by hitting
[SETUP] in DVD mode (Refer to “SELECTING THE LANGUAGE” on page 13).
• “CHANNEL SET UP” menu is not operative in DVD mode although it is displayed on the screen.
Press [SELECT] to move to TV mode first, then follow steps in “CHANNEL SET UP” on page 13.
– 28 –
EN
D
PARENTAL CONTROL
IF YOU FORGET THE PASSWORD
Parental Control limits the disc viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alternative scenes from being played by your children.
1 Hit the number buttons [4], [7], [3], [7] at
step 3 . Then enter your new password.
¡Password will be cleared and parental level will be
set to “ALL”.
PARENTAL LEVEL
2 Proceed steps 4 to 6 again.
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s ratings exceed the level you set.
INITIALIZE
Follow steps 1 to 2 in the “CUSTOM MENU” section on page 43.
DVD-V
3 Enter your four-digit password then hit
This allows you to return all selections of SETUP
(except for “PARENTAL” and menu language) to
their default settings.
[ENTER].
SETUP
PARENTAL
PASSWORD
Enter current password.
1 Hit [SETUP] twice in STOP mode so that the
“INITIALIZE” menu appears.
4 Press [K / L] to select “PARENTAL LEVEL”
2 Press [K / L] to select “INITIALIZE” then hit
then hit [ENTER].
SETUP
[ENTER].
PARENTAL
PARENTAL LEVEL
CHANGE
QUICK
CUSTOM
INITIALIZE
3 Select “YES” then hit [ENTER] twice.
5 Press [K / L] to select the desired level
All the settings (except for
“PARENTAL” and menu language) will be cleared.
¡To cancel the initialization,
select “NO”.
then hit [ENTER].
SETUP
SETUP
ALL
PARENTAL
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
6 Hit [SETUP] to exit the menu.
SETUP
INITIALIZE
Initialize?
NO
YES
4 Hit [SETUP] to exit the menu.
NOTES:
¡When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the
password.
¡To change the password, press [K / L] to select
“CHANGE” at step 4 then hit [ENTER]. Enter the
four-digit password, then hit [ENTER].
¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡Record the password in case you forget it.
CONTROL LEVELS
¡ALL
All parental lock is cancelled.
¡Level 8
DVD software of any grade (adult/general/children)
can be played back.
¡Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
¡Level 1
Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.
– 29 –
EN
TROUBLESHOOTING GUIDE
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, consulting the following checklist.
Problem
No power
No operation by infrared remote
control
Corrective Action
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
• You have to be within 23 feet of the unit.
• Check if the correct mode is selected. If not switch the mode by hitting [SELECT] on the remote control,whichever you need.
TV Mode
Problem
No Picture or Sound
Bars On Screen
Picture Distorted or Blurred
Picture Rolls Vertically
Lines or Streaks in Picture
No Color
Poor Reception on Some Channels
Ghosts in Picture
Weak Picture
Sound OK, Picture Poor
Picture OK, Sound Poor
Different color marks on screen
Corrective Action
Try
a
new
channel,
if
OK,
then possible station trouble.
•
Make
sure
the
power
is
turned
on.
•
• Hit [SELECT] on the remote control to select TV mode. Then try
other TV feature.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust COLOR control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Check for local interference.
• Magnetism from nearby appliances and geomagnetism might affect
the color of the TV picture. Move the unit away from the appliances,
the unit can repair itself automatically. If you want to repair immediately, unplug the unit power cord, then plug it in again 30 minutes or
so later. This automatically resets the unit.
– 30 –
EN
Closed Caption Problem
The unit is showing captions
that are misspelled.
Possible Remedy
• You are watching a live broadcast and spelling errors made by the
• closed captioning production company may pass through uncorrected.
• A prerecorded program will not show any misspelled words because
• of the normal time available for editing the captions.
The unit will not show the text
• Captions that are delayed a few seconds behind the actual dialogue
in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies
what is being said.
• can display a dialogue to a maximum of 220 words per minute. If a
• dialogue exceeds that rate, selective editing is used to insure that the
• captions remain up-to-date with the current TV screen dialogue.
The captions are scrambled with
• Interference caused by building, power lines, thunderstorms, etc.
white boxes on the TV screen.
• may cause scrambled or incomplete captions to appear.
The program guide listed a TV show • Broadcasters may at times use a time compression process to the
as being closed captioned but none • actual program so that additional advertising time can be given.
of the captions were displayed.
• Since the decoder cannot read the compressed information,
• captions will be lost.
The unit screen shows a black
• You are in the TEXT mode. Select CAPTION mode or CAPTION
box on certain channels.
• [OFF].
DVD Mode
Problem
No picture
Disc cannot be played
No sound
No DTS audio is output
Distorted picture
Audio or subtitle language
does not match the set up
The camera angle cannot be
changed
Audio or subtitle language cannot
be changed
“Prohibited icon” appears on the
screen, prohibiting an operation
CD sound dropout
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Corrective Action
• Insert a correct video disc that plays on this unit.
• Hit [SELECT] on the remote control to select DVD mode. Next, hit
[PLAY O] or [OPEN/CLOSE A]. Then, try other DVD feature.
• Insert the disc.
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control level.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio. This is not a malfunction.
• There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
• The selected language is not available for audio or subtitles on the
DVD.
This is not a malfunction.
• The DVD does not contain sequences recorded from different camera
angles. This is not a malfunction.
• The DVD does not contain audio source or subtitles in the selected
language. This is not a malfunction.
• That operation is prohibited by the unit or the disc.
This is not a malfunction.
• Scratched disc. Replace the disc with an unscratched one.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
– 31 –
EN
MAINTENANCE
CABINET CLEANING
SERVICING
• Wipe the front panel and other exterior surfaces of
• Should your unit become inoperative, do not try to
•
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed surfaces.
correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power
cord and please call our help line at 1-800-2562487, to locate an Authorized Service Center.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
• If the unit still does not perform properly when it is operated, while referring to the relevant sections and to
“TROUBLESHOOTING GUIDE” in this Owner's Manual, the laser optical pickup unit may be dirty. Consult
your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• Handle the discs so that fingerprints and dust do
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.
not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it
is not used.
– 32 –
EN
SPECIFICATIONS
GENERAL SPECIFICATIONS
TV
CRT :
20 inch in-line gun,
90˚ deflection tube
Television system:
NTSC-M
TV Standard
Closed caption system: §15.119/FCC
Channel coverage:
VHF:
2 ~ 13
UHF:
14 ~ 69
CATV:
2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System:
181 channel
frequency synthesized
tuning system
Channel access:
Direct access keyboard,
programmable
scan and up/down
ELECTRICAL SPECIFICATIONS
Sound output:
OTHER SPECIFICATIONS
Terminals
Antenna input:
Video input:
Audio L/R input:
Headphone:
Coaxial digital
audio output
(only DVD):
Remote control:
Operating
temperature:
Power requirements:
Power consumption
(Maximum) :
Dimensions :
DVD
Discs:
DVD-Video, Audio CD
Output signal format: NTSC color
2 speakers, 1W, 8 ohm
Weight :
VHF/UHF/CATV
75 ohm unbalanced (F-type)
RCA connector [ 1
RCA connector [ 2
1/8" stereo (3.5 mm)
One pin jack,
500m Vpp (75 ohm)
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
AC 120V, 60Hz
80W
H:20-3/16" (514mm)
W:20-3/16" (512mm)
D:19-13/16" (503mm)
46.3lbs (21.0kg)
• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will be English.
– 33 –
EN
INDICE
■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 34
PANEL FRONTAL DE LA UNIDAD . . . . . . . . . . . . . . . 34
MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 34
VISTA POTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 35
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 35
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 35
CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 36
CONEXIÓN A UN AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA DIGITAL, PLATINA
MD O PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . 36
CONEXCIONA UN DECODIFICADOR DOLBY
DIGITAL (Para DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
SECCIÓN DE TV
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 37
SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 37
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SECCIÓN DE DVD
■ REPRODUCCIÓN DE UN DVD DE VIDEO O UN
CD DE AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 38
CONTROLES DE
OPERACIÓN Y FUNCIONES
PANEL FRONTAL DE
LA UNIDAD
Consulte la figura 1 de la página 8
MANDO A DISTANCIA
Consulte la figura 2 de la página 8
VISTA POSTERIOR
Consulte la figura 3 de la página 9
1. Bandeja de carga del disco
2. Toma de entrada VIDEO
Conecte aquí la toma de salida de vídeo de una
videocámara o de una videograbadora.
3. Tomas de entrada AUDIO L/R
Conecte aquí las tomas de salida de audio de una
videocámara o de una videograbadora.
4. Botón POWER
Presione para conectar y desconectar la
alimentación.
5. Botones VOLUME K/L (VOL.m/n)
Presione para controlar el nivel del volumen para el
DVD y el televisor.
6. Botones CHANNEL K/L (CH. K/L)
Presione para seleccionar el canal memorizado.
Presione para cambiar a un modo de televisor
cuando esta en el modo de DVD.
7. Ventanilla del sensor del mando a distancia
8. Botón STOP C
Detiene la operación del disco.
9. Botón SKIP H
Reproduce desde el inicio del capítulo o canción actual.
Botón SEARCH (REV) h (panel frontal)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción hacia atrás.
10. Botón PLAY O
Inicia la reproducción del contenido del disco.
Presione para cambiar a un modo de DVD cuando
esta en el modo de televisor.
11. Botón SKIP G
Reproduce desde el inicio del siguiente capítulo o
canción.
Botón SEARCH g (panel frontal)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción en avance.
12. Botón PAUSE F
Hace una pausa en la operación del disco.
13. Botón OPEN/CLOSE A
Presione para insertar un disco en la bandeja o
retirarlo de ella.
14. Toma HEADPHONE
Para conectar auriculares (no suministrados) y
escuchar en privado.
15. Botón MODE
Activa el modo de reproducción programada o el
modo de reproducción aleatoria cuand se reproducen
CDs.
16. Botones de números
Modo del televisor:
Presione dos dígitos para tener acceso directamente
al canal deseado.
Recuerde presionar [0] antes de elegir un canal de
un solo dígito.
Botón +100
Presione para seleccionar canales de televisión por
cable cuyo número sea superiors a 99.
Modo DVD:
Presione para introducir el número deseado.
Botón +10
Presione para introducir números superiors a 9.
17. Botón SLEEP
Presione para visualizar el temporizador para dormir
y activar la función. La hora de apagado puede
determinarse por el número de veces que usted pulsa
el botón. (0, 30, 60, 90 o 120 minutos)
18. Botón REV h
Presione para volver rápidamente en el disco.
Presione [PAUSE F] y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad en
avance de la cámara lenta.
Botón FWD g
Presione para avanzar rápidamente en el disco.
Presione [PAUSE F] y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad
de avance de la cámara lenta.
19. Botón V.SURR (envolvente virtual)
Presione para activar/desactivar el envolvente
virtual.
20. Botón SETUP
Presione para entrar o salir del menú de
configuración de televisor o DVD.
– 34 –
ES
21. Botón TITLE
Visualiza el menú de títulos.
22. Botón CLEAR
Repone un ajuste.
23. Botón DISPLAY
Modo del televisor:
Presione para visualizar el número del canal en la
pantalla. Si lo presiona de nuevo, el número del
canal desaparecerá.
Modo de DVD:
Visualiza el estado actual en la pantalla del televisor.
24. Botón SEARCH MODE
Presione para localizar un punto deseado.
25. Botón AUDIO
Presione para seleccionar un idioma de audio o un
modo de sonido deseado.
26. Botón SUBTITLE
Presione para seleccionar un idioma de subtítulos
deseado.
27. Botón REPEAT
Repite la reproducción del disco, título, capítulo o
pista actual.
28. Botón ANGLE
Presione para cambiar el ángulo de la cámara y ver,
desde un ángulo diferente, la secuencia que está
siendo reproducida (si existe).
29. Botón A-B REPEAT
Repite la reproducción de una sección seleccionada.
30. Botón RETURN
Permite volver a la pantalla anterior en el modo de
configuración.
31. Botón ENTER
Presione para establecer un ajuste.
32. Botones K / L / { / B
Modo de televisor:
Presione para seleccionar un modo de ajuste desde
el menú que aparece en la pantalla del televisor.
Presione para seleccionar o ajustar desde un menú
particular.
Modo de DVD:
Presione para seleccionar un ítem de menú.
33. Botón DISC MENÚ
Muestra menú del DVD.
34. Botón SELECT
Presione para cambiar a un modo de televisor,
modo de entrada externa o modo de DVD.
NOTA: Cuando seleccione el modo DVD con este
botón, Presione primero [PLAY O] u
[OPEN/CLOSE A]. De lo contrario, las
funciones del DVD no se activarán.
35. Botón MUTE
Presione para apagar el sonido de un programa de
TV. (La visualización del nivel del sonido cambia de
ROJO CLARO a AZUL CLARO.) Presione de
nuevo este botón o [VOL m / n] para restaurar el
sonido.
36. Botón PICTURE
Presione para entrar en el modo de ajuste de imagen.
37. Cable de alimentación
Conéctelo a una toma de CA convencional (120
V/60 Hz).
NOTA: Retire el cable de alimentación del gancho
para evitar romperlo antes de conectarlo a
una toma de CA convencional.
38. Toma de salida de audio digital COAXIAL
(audio de DVD solamente)
Conecte a la entrada digital de un amplificador o
decodificador externo.
39. Toma de entrada ANT.
Conecte a una antena, sistema de televisión por
cable o sistema de satélite.
PARA INSERTAR LAS PILAS
1) Abra la cubierta del compartimiento de las pilas
empujando la cubierta del mando a distancia en el
sentido de la flecha.
2) Inserte 2 pilas "AA" en el compartimiento de las
pilas, en el sentido indicado por las marcas de
polaridad (+/-).
3) Vuelva a poner la cubierta.
NOTAS:
• No mezcle pilas alcalinas y de manganeso.
• No mezcle pilas viejas y nuevas.
PREPARACIÓN PARA LA
UTILIZACIÓN
CONEXIONES DE
ANTENA/CABLE
Consulte la figura 4 de la página 10
Nota para el instalador de sistemas CATV
Esta nota tiene la finalidad de llamar la atención del
instalador de sistemas CATV para que tenga en
cuenta el Artículo 820-40 del NEC, el cual
proporciona consejos para hacer una conexión a
tierra apropiada y, en particular, especifica que la
tierra del cable deberá estar conectada al sistema de
puesta a tierra del edificio, tan cerca del punto de
entrada del cable como sea posible.
NOTA:
Antes de enchufar la antena a la toma ANT. de la
unidad, compruebe que la clavija no esté doblada.
Si esta doblada, póngala derecha como se muestra
en la ilustración, y luego conéctela en la toma ANT.
de la unidad.
Clavija doblada
Cable
Clavija
(Necesita enderezarse) (Clavija derecha)
– 35 –
ES
NOTA:
• Cuando conecte una videograbadora monofónica
(otra fuente) a esta unidad, conecte la toma de
salida de audio de la videograbadora monofónica
(otra fuente) a la toma AUDIO L de esta unidad. El
audio saldrá igualmente por los canales izquierdo y
derecho.
ANTENA COMBINADA DE VHF/UHF
La antena combinada de VHF/UHF de 75 ohmios
puede conectarse al terminal ANT.
ANTENA SEPARADAS DE VHF/UHF
En algunas zonas será necesario utilizar una antena
exterior.
TELEVISION POR CABLE SIN CAJA DE
CONVERTIDOR / DECODIFICADOR
Consulte la figura 5 de la página 11
Utilice esta conexión si su sistema de televisión por
cable se conecta directamente a su televisor/DVD sin
una caja de convertidor. Utilice el mando a distancia
de la unidad para seleccionar los canales.
CONEXIÓN A UN
AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA
DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD)
TELEVISION POR CABLE CON CAJA
DE CONVERTIDOR/DECODIFICADOR
O CAJA DE SATÉLITE
Si su empresa de televisión por cable le suministra
una caja de convertidor, o si usted utiliza un sistema
de satélite, podrá utilizar la conexión básica mostrada
aquí.
La selección de los canales deberá hacerse con la caja
de convertidor o con la caja de satélite. Esto significa
que los canales no se podrán cambiar utilizando el
mando a distancia de la unidad.
PARA VER UN CANAL
CODIFICADO/DECODIFICADO
1) Ponga el selector de canales de la unidad en la
posición del canal de salida de la caja de
convertidor de televisión por cable o de la caja de
satélite. (Ej., CH3)
2) Seleccione el canal que va a ver en su caja de
convertidor de televisión por cable o caja de
satélite.
NOTA:
• Para su seguridad y para evitar que se dañe
la unidad, desenchufe el cable de antena de la
toma ANT. antes de mover la unidad.
Utilice un cable digital coaxial de audio de venta en
el comercio especializado para hacer las conexiones
de audio.
Consulte la figura 6 de la página 11
NOTAS:
• La fuente de audio de un disco en un formato de
sonido envolvente Dolby Digital de 5,1 canales no
se puede grabar como sonido digital mediante una
platina MD o DAT.
• Asegúrese de desconectar la alimentación de todos
los componentes antes de conectar otro
componente.
• Consulte los manuales del propietario de los
componentes que va a conectar a la unidad.
• Ponga DOLBY DIGITAL en OFF para la salida de
audio en el modo de preparación. La reproducción
en una unidad utilizando ajustes incorrectos puede
provocar distorsión por ruido, y también se pueden
dañar los altavoces.
CONEXIÓN A TOMAS DE
ENTRADA EXTERNA
Cuando vea un programa grabado en otra fuente
(videograbadora o videocámara), utilice las tomas de
entrada de audio/vídeo de la parte delantera de la
unidad.
Conecte las tomas de salida de audio/vídeo de otra
fuente a las tomas AUDIO L/R y VIDEO de esta
unidad. Después presione [SELECT] hasta que
aparezca "AUX" en la pantalla.
– 36 –
ES
CONEXCIONA UN
DECODIFICADOR DOLBY
DIGITAL (Para DVD)
SECCIÓN DE TV
Si utiliza esta unidad para reproducir un disco DVD
en un formato de sonido envolvente Dolby Digital de
5,1 canales, la unidad dará salida a un flujo de datos
DOLBY DIGITAL desde su toma de salida de audio
digital COAXIAL. Si conecta la unidad a un
decodificador Dolby Digital, podrá disfrutar de una
tonalidad más convincente y real, con un sonido
envolvente potente y de alta calidad similar al de los
cines.
Utilice cables digitales coaxiales de audio disponibles
en el comercio especializado para hacer las
conexiones de audio.
Consulte la figura 7 de la página 12
NOTAS:
• Asegúrese de desconectar la alimentación de todos
los componentes del sistema antes de conectar a
otro componente.
• Consulte los manuales del propietario de los
componentes que vaya a conectar a la unidad.
• Si conecta un decodificador Dolby Digital, ponga
DOLBY DIGITAL en ON para la salida de audio
en el modo de preparación.
• A menos que se haga la conexión a un
decodificador Dolby Digital, ponga DOLBY
DIGITAL en OFF para la salida de audio en el
modo de preparación. La reproducción en la unidad
utilizando ajustes incorrectos puede generar
distorsión de ruido, y también puede estropear los
altavoces.
Fabricado bajo licencia de Dolby
Laboratories. “Dolby” y el símbolo de la D
doble son marcas de fábrica de Dolby
Laboratories.
PREPARACIÓN PARA LA
UTILIZACIÓN
SELECCIÓN DE IDIOMA
TV
1
Enchufe el cable eléctrico
de la unidad
Enchufe el cable eléctrico de la unidad en
una toma de CA estándar.
NOTA:
• Si aparecen algunas cifras en la esquina
de la pantalla, presione [POWER] sin desenchufar
el cable eléctrico.
Asegúrese de que ...
• Presiona [POWER] para encender la unidad.
NOTA:
• Esta función afecta sólo el idioma en el menú de la
pantalla y no la fuente de audio.
2
Seleccione “LANGUAGE”
Presione [SETUP] en el mando a
distancia.
K / L] para señalar
Presione [K
“LANGUAGE”.
3
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
Seleccione “ENGLISH”, “ESPAÑOL” o “FRANÇAIS”
Seleccione “ENGLISH” = inglés, “ESPAÑOL” o
“FRANÇAIS” = francés con [ENTER].
4
Salga del modo de idioma
Presione [SETUP] en el mando a distancia para
volver al modo del televisor.
NOTA: Si, por alguna razón, el menú está en francés,
presione [SETUP] en el mando a distancia, presione
K / L] para señalar el “LANGAGE [FRANÇAIS]”,
[K
a continuación, presione [ENTER] y presione
[SETUP] en el mando a distancia.
– 37 –
ES
AJUSTE DE CANAL
SECCIÓN DE DVD
REPRODUCCIÓN DE UN
DISCO
TV
Puede programar el sintonizador para buscar todos
los canales que recibe en su localidad.
NOTA: El canal preparado NO es necesario cuando
esté conectado a una caja de cable o caja de satélite.
Sólo tiene que seleccionar con el selector de canal de
la unidad al canal de salida de la caja de cable o caja
de satélite (por ejemplo CA3). Seleccione el canal a
ver en la caja de cable o caja de satélite.
Asegúrese de que ...
• Presiona [POWER] para encender el la unidad.
1
DVD-V
CD
Para empezar
¡Conecte el interruptor del amplificador y otros
equipos, si fuera necesario.
1 Presione [POWER].
¡La alimentación se conectará.
Seleccione “AJUSTE DE CANAL”
Presione [SETUP] en el mando a
distancia.
K / L] para señalar
Presione [K
“AJUSTE DE CANAL”.
A continuación, presione [ENTER].
2
REPRODUCCIÓN BÁSICA
–TV PREP–
2 Presione [OPEN/CLOSE A].
¡La bandeja de carga del disco se abrirá.
B AJUSTE DE CANAL
AJUSTE DE V-CHIP
IDIOMA [ESPAÑOL]`
TITULO [OFF]
3 Ponga el dlsco en la bandeja con el lado de
Empiece el prefijado automático
la etiqueta hacia arriba.
K / L] para señalar
Presione [K
“AUTOPROGRAMACION DE
CA”.
A continuación, presione
[ENTER].
El sintonizador busca y memoriza todos los canales
activos en su localidad.
– AJUSTE DE CANAL –
AGREGAR/BORRAR (CATV)
B AUTOPROGRAMACION DE CA.
3
Después de buscar
El sintonizador se detiene en el canal memorizado
más bajo.
• Cuando se activa AUTOPROGRAMACION DE CA, donde no
hay entrada de señal del televisor,
aparecerá “NO HAY SEÑAL DE
TV” en la pantalla después de terminar la búsqueda de canales.
• La unidad puede reconocer los canales de TV de
cable para que sean canales de TV de antena con
las condiciones de recepción. En este caso, pruebe
nuevamente con el prefijado automático en las
condiciones de recepción fina.
NO HAY SEÑAL DE TV
4 Presione [PLAY O].
¡La bandeja se cerrará automáticamente y la
reproducción empezará después desde el primer
capítulo o pista del disco. Si la reproducción no
empieza automáticamente, presione [PLAY O].
¡Cuando reproduzca un DVD que tenga grabado un
menú de títulos, el menú aparecerá en la pantalla.
– 38 –
5 Presione [STOP] para detener
la reproducción.
ES
MEMO
– 39 –
ES
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does
not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE
PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN
THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest FUNAI Authorized Service Center or for general service procedure, please
call or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-256-2487
http://www.emersonaudiovideo.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in Malaysia
1EMN20223
T9014UQ ★★★★★
Download PDF

advertising