Emerson EWC20D4 TV DVD Combo User Manual

OWNER’S
MANUAL
“EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.”
COLOR TV/DVD
EWC20D4 (20 inch)
SUPPLIED ACCESSORIES
Remote Control Unit
Batteries
Owner’s Manual
Owner's Manual
INSTRUCCIONES
EN ESPAÑOL INCLUIDAS.
As an ENERGY STAR ®
Partner, our company has
determined that this product meets
the ENERGY STAR ® guidelines for
energy efficiency. ENERGY STAR ®
is a U.S. registered mark.
NE221UD
2 AA Batteries
0EMN02487
If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-256-2487.
Or visit our WEB SITE at http://www.funai-corp.com
Please read before using this equipment
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
CAUTION
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.
Accessoires- Ne placez pas cette TV/DVD sur une table
roulante, un support, un trépied, une console ou une table
instable. Cette TV/DVD risquerait de tomber, pouvant
gravement blesser quelqu'un et l'appareil même pourrait
être sérieusement endommagé. N'utilisez qu'une table
roulante, un support, un trépied, une console ou une table
recommandé par le fabriquant, ou vendu avec la TV/DVD.
Pour n'importe quelle installation de l'appareil, on devra
suivre les instructions du fabriquant et l'on devra utiliser les
accessoires d'installation recommandés par le fabriquant.
L'ensemble combiné de l'appareil avec une table roulante
devra être déplacé avec précaution. Des arrêts brusques,
une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de
l'appareil/table roulante.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug TV/DVD from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recommended by
the TV/DVD manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this TV/DVD near waterfor example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8.Accessories-Do not place this TV/DVD on an unstable cart,
stand, tripod, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
TV/DVD. Any mounting of the
PORTABLE CART WARNING
AVERTISSEMENT POUR UNE
appliance should follow the manu- TABLE
ROULANTE PORTATIVE
facturer’s instructions and should use
a mounting accessory recommended
by the manufacturer. An appliance
and cart combination should be
moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appli- S3126A
ance and cart combination to overturn.
9. Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/DVD on a bed, sofa, rug, or other similar surface. This
TV/DVD should never be placed near or over a radiator or
heat register. This TV/DVD should not be placed in a builtin installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions
have been adhered to.
10.Power Sources-This TV/DVD should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For TV/DVDs intended to operate from battery
power, or other sources, refer to the operating instructions.
11.Grounding or Polarization-This TV/DVD is equipped
with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
–2–
EN
0C28
F IGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECT RICAL CODE
ANTE NNA
L EAD I N
WI RE
GROUND
CLAMP
A NTENNA
DI SCHARG E UN I T
(NEC SECTION 8 10 -2 0)
EL ECT RI C
SE RV I CE
EQ U I PM EN T
G RO UNDI NG CO NDUCT ORS
(NEC SECTION 8 10 -2 1)
G RO UND CL AM PS
NEC - NATI O NAL EL ECTRI CAL CO DE
POWER SERVI C E G RO UNDI NG
EL EC TR O DE SYST EM
(NEC ART 2 50 , PART H)
S2 8 9 8 A
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
19.Damage Requiring Service-Unplug this TV/DVD from
the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV/DVD, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)
14.Lightning-For added protection for this TV/DVD receiver
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TV/DVD due to lightning and
power-line surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
b. If liquid has been spilled, or objects have fallen into the
TV/DVD.
c. If the TV/DVD has been exposed to rain or water.
d. If the TV/DVD does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV/DVD to its normal operation.
e. If the TV/DVD has been dropped or damaged in any way.
f. When the TV/DVD exhibits a distinct change in performance-this indicates a need for service.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.
21.Safety Check-Upon completion of any service or repairs to
this TV/DVD, ask the service technician to perform routine
safety checks to determine that the TV/DVD is in proper
operating condition.
22.Heat-This TV/DVD product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the TV/DVD.
18.Servicing-Do not attempt to service this TV/DVD yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
–3–
EN
0C28
PRECAUTIONS
LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to service this device, due to possible eye injury.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
–4–
EN
0C28
LOCATION
SYMBOLS USED IN THIS MANUAL
For safe operation and satisfactory performance of
your TV/DVD, keep the following in mind when
selecting a place for its installation:
• Shield it from direct sunlight and keep it away from
sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the TV/DVD near strong magnetic fields.
• Avoid moving TV/DVD to locations where temperature differences are extreme.
The following symbols below appear in some headings and notes in this manual, with the following
meanings
TV
: Description refers to TV operation (in the TV mode).
DVD-V
: Description refers to playback of DVD video discs
(in the DVD mode).
CD
: Description refers to playback of audio CDs
(in the DVD mode).
MP3
: Description refers to playback of MP3 discs
(in the DVD mode).
QUICK
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting
•
•
•
it from an AC wall outlet. Grasp it by the plug.
If, by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the
TV/DVD disc loading tray.
Do not place anything directly on top of the unit.
WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD
which has moisture, it may damage the DVD and
TV/DVD. Therefore when the condensation occurs
inside the unit, turn POWER on and allow at least 2
hours for the unit to dry out.
–5–
EN
0C28
TABLE OF CONTENTS
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . .5
C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C OPERATING CONTROLS AND FUNCTIONS . . .8
INSTALLING THE BATTERIES . . . . . . . . . . .9
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTIONS . . . . . . .10
CONNECTING TO EXTERNAL INPUT JACKS .11
CONNECTING TO AN AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS,
MD DECK OR DAT DECK (for DVD only) . .11
CONNECTING TO A DOLBY DIGITAL
DECODER (for DVD) . . . . . . . . . . . . . . . . . . .12
TV SECTION
C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .13
SELECTING THE LANGUAGE . . . . . . . . . . .13
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . .13
DELETING (OR ADDING) CHANNEL . . . . .14
C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .15
WATCHING A TV PROGRAM . . . . . . . . . . . .15
DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15
PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .16
CLOSED CAPTION SYSTEM . . . . . . . . . . . .16
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .17
DVD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .19
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .19
DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .19
C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .22
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .22
TITLE / CHAPTER SEARCH . . . . . . . . . . . . .22
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .22
MARKER SETUP SCREEN . . . . . . . . . . . . . .22
C SPECIAL PLAYBACK FUNCTION . . . . . . . .23
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23
C PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .24
MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .24
TRACK SELECTION . . . . . . . . . . . . . . . . . . .24
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .24
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .24
C CHANGING THE SETTINGS . . . . . . . . . . . .25
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .25
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .25
STEREO SOUND MODE . . . . . . . . . . . . . . . .25
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .25
BLACK LEVEL SETTING . . . . . . . . . . . . . . .25
VIRTUAL SURROUND . . . . . . . . . . . . . . . . .25
C THE ON-SCREEN INFORMATION . . . . . . .26
C CHANGING THE DVD SETUP ITEMS . . . .27
LANGUAGE SETTING . . . . . . . . . . . . . . . . .27
DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .28
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .28
PARENTAL CONTROL . . . . . . . . . . . . . . . . .29
C TROUBLESHOOTING GUIDE . . . . . . . . . . .30
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .32
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .32
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .33
C ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .20
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .20
GENERAL FEATURES . . . . . . . . . . . . . . . . . .20
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .20
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .20
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
STEP BY STEP PLAYBACK . . . . . . . . . . . . .21
FAST FORWARD/REVERSE SEARCH . . . . .21
SLOW FORWARD / SLOW REVERSE . . . . .21
–6–
EN
0C28
FEATURES
TV Mode
DVD Mode
• 181 channel capability PLL frequency synthesiz•
•
er tuner with direct station call
(A converter may be necessary to view scrambled cable
channels.)
Infrared remote control
Trilingual on screen menu display selectable in
English, Spanish, or French
¡Dolby Digital sound
This TV/DVD can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby Digital
decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
¡Random playback for audio CD and MP3
¡Sleep Timer
The Sleep Timer function enables you to shut off the power
without pressing POWER after a desired time period.
This TV/DVD can shuffle the order of tracks to play them
in random order.
¡Program playback for audio CD and MP3
¡Closed Caption Decoder
You may view specially labeled (cc) TV programs,
movies, news, etc. with either a dialogue caption or text
display added to the program.
You can program the order of tracks to play them in any
desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto Shut Off Function
If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the TV/DVD will turn itself
off automatically.
¡Screen saver/Auto power-off functions
The screen saver program starts when there is no input
from the TV/DVD for five minutes in the stop mode.
When the screen saver program is activated for 15 minutes, the power is automatically turned off.
¡V-CHIP
Enables parents to prevent their children from watching
inappropriate material on TV.
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound mode,
if different languages and modes are available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This TV/DVD automatically detects if the loaded disc is
DVD, audio CD or MP3 on disc.
¡On-screen display
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡Search
Chapter search / Title search / Track search / Time search
¡Repeat
Chapter / Title / Track / Group / All / A-B
¡Marker
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which the
play was stopped.
¡Virtual Surround
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
–7–
EN
0C28
OPERATING CONTROLS AND FUNCTIONS
[Fig. 1]
TV/DVD FRONT PANEL
VIDEO
L−AUDIO−R
POWER
VOLUME
CHANNEL
STOP
SKIP
PLAY
SKIP
PAUSE
OPEN/
CLOSE
−SEARCH−
HEADPHONE
1
2
POWER PICTURE SELECT
16
1
2
3
4
5
6
7
8
9
11
10
SKIP
OPEN/
CLOSE
CH.
6
VOL.
5
V.SURR
MUTE
PLAY
DISC
MENU
SLOW
12
8
33
DISPLAY
ENTER
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
AUDIO
ANGLE
32
31
30
29
MODE
15
24
25
35
19
18
FWD
STOP
SETUP
7 8 9 10111213 14
9. SKIP H Button [page 22]
Plays back from the beginning of the current
chapter or track.
SEARCH (REV) E Button (Front Panel)
[page 21]
During playback or in the pause mode, press and
hold button down for a few seconds to change
reverse playback speed.
10. PLAY Button [page 20]
Starts playback of the disc contents.
Press to change to DVD mode when TV mode.
+10
REV
23
20
21
22
6
7. Remote Sensor Window
8. STOP Button [page 20]
Stops operation of the disc.
9
0
PAUSE
5
13
34
+100
SLEEP
17
4
[Fig. 2]
REMOTE CONTROL
4
36
3
SUBTITLE
28
27
26
1. Disc loading tray
2. VIDEO input Jack [page 11]
Connect to the video output jack of a video
camera or VCR.
3. AUDIO L/R input Jacks [page 11]
Connect to the audio output jacks of a video
camera or VCR.
4. POWER Button [page 13]
Press to turn the power on and off.
5. VOLUME K/L (VOL. m/n) Buttons
Press to control the volume level for the DVD and TV.
6. CHANNEL K/L (CH. K/L) Buttons [page 13]
Press to select memorized channel.
Press to change to TV mode when DVD mode.
11. SKIP G Button [page 22]
Plays back from the beginning of the next chapter
or track.
SEARCH (FWD) D Button (Front Panel)
[page 21]
During playback or in the pause mode, press and
hold button down for a few seconds to change forward playback speed.
12. PAUSE Button [page 21]
Pauses the current disc operation.
13. OPEN/CLOSE Button [page 20]
Press to insert discs into or remove them from the
tray.
14. HEADPHONE Jack
To connect headphone (not supplied) for personal
listening.
15. MODE Button [pages 23-25]
Activates program playback or random playback
mode when playing CDs or MP3.
16. Number Buttons
TV Mode: [page 15]
Press two digits to directly access the desired channel.
Remember to press 0 before a single digit channel.
+100 Button
Press to select cable channels which are higher than 99.
DVD Mode: [page 22]
Press to enter the desired number.
+10 Button
Press to enter the desired numbers which are greater
than 9.
–8–
EN
0C28
TV/DVD REAR VIEW
[Fig. 3]
COAXIAL
37
ANT.
38 39
17. SLEEP Button [page 16]
Press SLEEP to display the sleep timer and start the
function. The shut off time can be determined by the
number of times you press this button. (0, 30, 60,
90, or 120 minutes)
18. REV h Button [page 21]
Press to view the DVD picture in fast reverse
motion. Press PAUSE, then press this button to begin
slow motion playback. Press this button repeatedly
to change the reverse speed of slow motion.
FWD g Button [page 21]
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.
19. V.SURR (VIRTUAL SURROUND) Button
32. Arrow Buttons
TV Mode: [page 13]
Press to select a setting mode from the menu on the
TV screen.
Press to select or adjust from a particular menu.
DVD Mode: [page 20]
Use when making settings while watching the
display on a TV screen.
33. DISC MENU Button [page 20]
Displays the menus in the DVD.
34. SELECT Button [page 20]
Press to change to TV mode, external input mode or
DVD mode.
Press to set virtual surround on/off.
20. SETUP Button [pages 13,27-29]
Press to enter or exit the TV menu or DVD setup
mode.
21. TITLE Button [page 20]
Displays the title menu.
22. CLEAR Button [pages 22-24]
Resets a setting.
23. DISPLAY Button
TV Mode:
Press to display the channel number on the screen.
If you press it again, the channel number will disappear.
DVD Mode: [page 26]
Displays the current status on the TV screen for
checking purposes.
24. SEARCH MODE Button [page 22]
Press to locate a desired point.
25. AUDIO Button [page 25]
Press to select a desired audio language or sound
mode.
26. SUBTITLE Button [page 25]
Press to select a desired subtitle language.
27. REPEAT Button [page 23]
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE Button [page 25]
Press to change the camera angle to see the sequence
being played back from a different angle.
29. REPEAT A-B Button [page 23]
Repeats playback of a selected section.
30. RETURN Button [page 25]
Returns to the previous operation in the DVD setup
mode.
31. ENTER Button [pages 13, 20]
Press to accept a setting.
35. MUTE Button
Press MUTE to turn off the sound portion of the TV
program. (Volume level display turns LIGHT RED
from LIGHT BLUE.) Press MUTE again or press
VOL. m or nto restore sound.
36. PICTURE Button [page 15]
Press to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to
a standard AC outlet.
38. COAXIAL digital audio out Jack (DVD Audio
Only) [pages 11, 12]
Connect to the digital input of an external
amplifier or decoder.
39. ANT. in Jack
Connect to an antenna, cable system, or satellite system.
[page 25]
NOTE: When you select the DVD mode by this
button, press PLAY or OPEN/CLOSE first.
Otherwise, the DVD features are not operated.
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
NOTES
¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.
–9–
EN
0C28
PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Satellite Box or
Cable Box
OUT
(Not supplied)
IN
VHF/UHF Antenna
(Not supplied)
From Cable System or
Satellite Dish
VHF Antenna
(Not supplied)
UHF Antenna
(Not supplied)
From
Cable System
COAXIAL
or
75-ohm Coaxial
Cable (Not supplied)
VHF/UHF
or Combiner
(Not supplied)
ANT.
ANT.
or
Flat twin-lead cable
[Fig. 4]
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Bent pin
NOTE:
Before plugging the antenna into the ANT. IN jack of the TV/DVD,
check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT. IN jack of the TV/DVD.
VHF/UHF COMBINED ANTENNA
Cable Plug
(Needs to be straightened)(Straight pin)
CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITE BOX
A VHF UHF 75 ohm combination antenna can be
connected to ANT terminal.
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown here.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the TV/ DVD Remote Control.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your TV/DVD without a converter box.
Use the TV/ DVD Remote Control to select channels.
TO VIEW A SCRAMBLED/UNSCRAMBLED
CHANNEL
1.Set the TV/DVD channel selector to the output
channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)
2.Select the channel to view at your Cable Converter
Box or Satellite Box.
– 10 –
EN
0C28
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on an another
source (VCR or video camera), use the audio/video
input jacks on the front of the TV/DVD.
Connect the audio/video output
jacks of another source to the
AUX
AUDIO L/R and VIDEO jacks of
this TV/DVD. Then press SELECT
until "AUX" appears on the screen.
NOTE:
• When you connect a monaural VCR (another
source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will
output in both L and R channel equally.
[Front of the TV/DVD]
To the
[Another source] audio output jacks
VIDEO
Audio/Video
cables
(not supplied)
VIDEO
L−AUDIO−R
L–AUDIO–R
etc.
To the video
output jack
[Fig. 5]
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
COAXIAL
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
ANT.
[Fig. 6]
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 28 to set DOLBY
DIGITAL to OFF.)
– 11 –
EN
0C28
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to
a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality
surround sound as enjoyed in movie theaters.
Use audio coaxial digital cables available at retail for the audio connections.
Front speaker
(left)
Center
speaker
Dolby Digital decoder
Surround
speaker
(left)
Front speaker
(right)
COAXIAL
To COAXIAL DIGITAL
AUDIO INPUT jack
Surround
speaker
(right)
ANT.
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
Subwoofer
[Fig. 7]
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
(See page 28 to set DOLBY DIGITAL to ON.)
• Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup
mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the
speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
– 12 –
EN
0C28
TV SECTION
SET UP FOR USE
CHANNEL SET UP
SELECTING THE LANGUAGE
TV
TV
Plug the TV/DVD power cord into a
standard AC outlet.
NOTE:
• If some digits appear in the corner of
the screen, press POWER without
unplugging the power cord.
You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the TV/DVD channel selector to the
output channel of the cable box or satellite box (Ex
CH3). Then select the channel to be viewed on the
Cable Box or Satellite Box.
Make sure ...
• Press POWER to turn on the TV/DVD.
NOTE: This function effects only the language on
the screen menu and not the audio source.
Make sure ...
• Press POWER to turn on the TV/DVD.
1
Plug in the TV/DVD power cord
1
2
Select “LANGUAGE”
Press SETUP on the remote control.
Press Arrow (K/L) to point to
“LANGUAGE”.
3
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using ENTER.
4
Select “CHANNEL SET UP”
Press SETUP on the remote control.
Press Arrow (K/L) to point to
“CHANNEL SET UP”.
Then, press ENTER.
Exit the Language mode
Press SETUP to return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press SETUP, press Arrow (K/L) to point to
“IDIOMA [ESPAÑOL]” or “LANGAGE
[FRANÇAIS]”, then press ENTER, then press
SETUP on the remote control.
2
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Begin auto ch programming
Press Arrow (K/L) to point to
“AUTO CH PROGRAMMING”.
Then, press ENTER.
The tuner scans and memorizes all
the active channels in your area.
3
- TV SETUP -
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO CH PROGRAMMING
After scanning
The tuner stops on the lowest memorized channel.
• When AUTO CH PROGRAMMING is activated
where there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of the channel scanning.
• The TV/DVD may recognize TV channels to be
CATV channels by the receiving conditions. In this
case, try auto ch programming again in the fine
receiving conditions.
– 13 –
EN
0C28
DELETING (OR ADDING)
CHANNEL
TV
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1
Select “CHANNEL SET UP”
Press SETUP on the remote control.
Press Arrow (K/L) to point to
“CHANNEL SET UP”.
Then, press ENTER.
2
Select “ADD/DELETE CH”
Press Arrow (K/L) to point to
“ADD/DELETE CH”.
Press ENTER.
3
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
Enter the desired channel number
Press Arrow (K/L) until your
desired channel number appears.
08
(You can also use the number buttons or CHANNEL(CH.) K/L to
enter it) (Example: CH8)
• You must proceed single-digit
channel numbers with a zero (Example: 02 ... 09).
• When selecting cable channels which are higher
than 99, press +100 first, then, press the last two
digits. (Example: to select channel 125, first press
+100, then press 2 and 5).
ADD / DELETE
4
Delete (or add) it from (into) memory
Press ENTER. The channel number changes to light
red. The channel is deleted from memory.
• To delete another channel, repeat steps [3] and [4].
• If you press ENTER again, the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
5
Exit the channel setup mode
Press SETUP to return to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press CHANNEL(CH.) K/L.
– 14 –
EN
0C28
TV OPERATION
WATCHING A TV PROGRAM
PICTURE CONTROL
TV
1
TV
Turn on the TV/DVD
Press POWER to turn on the TV/DVD.
2
Select the channel number
Press CHANNEL(CH.) K/L to select your desired
channel number, or press the number buttons.
Notes for using the number buttons on the remote
control:
• You must proceed single-digit channel numbers
with a zero (Example: 02 ... 09).
• When selecting cable channels which are higher
than 99, press +100 first, then, press the last two
digits. (Example: to select channel 125, first press
+100, then press 2 and 5).
Remember:
¡If the TV/DVD is connected to a cable box or
satellite box, the TV/DVD must be on CH3 or
CH4, then the channel to be viewed must be selected on the cable box or satellite box.
The TV/DVD’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
Make sure ...
• TV/DVD power must be turned on.
1
Select “PICTURE CONTROL”
Press PICTURE on the remote control.
2
Select item you want to adjust
Press Arrow (K/L) until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
BRIGHT
–PPPPPPPCPPPPPPP+
3
Adjust sound
Y to
Press VOLUME(VOL.) X/Y
adjust the volume.
3
VOLUME
20
C CC C C C CCCCCCCCCC
NOTE:
• If you press CHANNEL(CH.) K/L in the DVD
mode, you can change the TV channels.
Even if you turn off the TV/DVD in the DVD
mode, when you turn it on again, it will go into the
TV mode.
Adjust the picture control
Press Arrow (s / B) to adjust to your desired level
within 5 seconds.
NOTE:
• At step [3], the picture adjustment display will disappear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step [1].
COLOR
s
to decrease
brightness
to decrease
contrast
to pale
B
to increase
brightness
to increase
contrast
to brilliant
TINT
SHARPNESS
to purple
to soft
to green
to clear
BRIGHT
DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.
CONTRAST
• If there is a power failure of any kind, the unit will
retain its memory for this feature.
– 15 –
EN
0C28
SLEEP TIMER
TV
The Sleep Timer function enables you to shut off the power
without pressing POWER after a desired time period.
1
Set “SLEEP TIMER”
Press SLEEP on the remote control.
You may change the sleep time
with pressing SLEEP repeatedly.
The timer is set up to 120 minutes,
30 minutes each time SLEEP is
pressed.
NOTE:
If the TV/DVD displays a black
box on the TV screen, this means
that the TV/DVD is set to the
TEXT mode. To clear screen, select
[CAPTION1], [CAPTION2] or
[OFF].
Make sure ...
• TV/DVD power must be turned on.
1
SLEEP 120 MINUTE
To cancel the sleep timer:
Press SLEEP repeatedly until “SLEEP 0 MINUTE”
is displayed.
NOTES:
• When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
• To view the time left for sleep timer press SLEEP
once when SLEEP display disappears. After 10
seconds, display will disappear again.
CLOSED CAPTION SYSTEM
Select “CAPTION”
Press SETUP on the remote control.
Press K or L to point to “CAPTION”.
2
Select your desired caption menu
Press ENTER until your desired
caption menu appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
Exit the caption setting mode
Press SETUP to return to TV mode.
TV
You can view specially labeled (cc) TV programs,
movies, news, etc. with either a dialogue caption or
text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies and news while captioning
the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can
watch half screen text information if you want.
1-2: You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is used,
usually for a second language if available.
TO CANCEL THE CLOSED CAPTION
SYSTEM
Repeat steps [1] and [2], select [OFF] using ENTER.
Press SETUP on the remote control to return to TV
mode.
WHEN THE CLOSED CAPTION MODE
IS ON
The On-Screen Display will disappear after 5 seconds.
• This is also true when MUTE is pressed.
• If there is a power failure of any kind, the unit will
retain its memory for this feature.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
• Automobile ignition noise
• Electric motor brush noise
• Weak snowy reception on TV screen
• Multiplex signal reception displaying picture
ghosts or airplane flutter.
– 16 –
EN
0C28
V-CHIP SET UP
• When you select a rating category and turn it
TV
V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels, and Emergency Broadcast
System signals), then denies access to programming
if the program’s rating meets the limitations you
select. In this case, “PROTECTED PROGRAM by
...” message appears on the TV screen.
To block ratings, follow the steps below.
• Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).
TV RATING SET UP
Make sure ...
• TV/DVD power must be turned on.
1
Select “V-CHIP SET UP”
Press SETUP on the remote control.
Press Arrow (K/L) to point to “VCHIP SET UP”.
Then, press ENTER.
2
- TV SETUP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
3
4
Selection
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
Rating Category Explanations
Appropriate for all children
Appropriate for children seven and older
General Audience
Parental Guidance suggested.
Unsuitable for children under 14
TV-MA
Mature audience only
When you select TV-Y7, TV-PG, TV-14, or TV-MA
and you press ENTER, the sub-ratings will appear
on the TV screen.
If you select the rating category (example: TV-PG)
and turn it [BLOCK] or [VIEW], the sub-ratings
(example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW]
individually when the rating category is set to
[BLOCK].
To set the sub-ratings individually, follow the steps
below.
• When you select [TV-Y7]:
Press Arrow (K/L) to select
“FV” (Fantasy Violence).
Then, press ENTER to select
[BLOCK] or [VIEW].
• When you select [TV-PG], [TV-14] or [TV-MA]:
Press Arrow (K/L) to select
“D”(Suggestive Dialog),
“L”(Coarse Language),
“S”(Sexual Situation), or
“V”(Violence). Then, press
ENTER to select [BLOCK] or [VIEW].
NOTE: When you select [TV-MA], “D” does not
appear on the TV screen.
• The sub-ratings which set to
[BLOCK] appears next to the rating category in the TV RATING
menu.
TV–Y7
B FV
Input Access code
ACCESS CODE
Press the number buttons to enter 4digit access code. The default code
is 0000.
_ _ _ _
TV–PG
Select “TV RATING”
Press Arrow (K/L) to point to “TV
RATING”.
Then, press ENTER.
•
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
When you turn “TV-Y” to [VIEW], the all ratings
will turn to [VIEW] automatically.
– V-CHIP SET UP –
B
TV RATING
MPAA RATING
CHANGE CODE
[BLOCK]
[BLOCK]
[BLOCK]
B D
L
S
V
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
B TV–Y
TV–Y7 (
)
TV–G
TV–PG (DLSV )
TV–14 (DLSV )
TV–MA ( LSV )
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
Select your desired item
Press Arrow (K/L) to point to your
desired item.
Then, press ENTER to select
[BLOCK] or [VIEW].
B TV–Y
TV–Y7 (
TV–G
TV–PG (
TV–14 (
TV–MA (
)
)
)
)
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
5
Exit the V-Chip setting mode
Press SETUP on the remote control to return to original mode.
– 17 –
EN
0C28
MPAA RATING SET UP
CHANGE ACCESS CODE
Make sure ...
• TV/DVD power must be turned on.
To change access code, follow the steps.
1
1
Select “V-CHIP SET UP”
Press SETUP on the remote control.
Press Arrow (K/L) to point to “VCHIP SET UP”.
Then, press ENTER.
2
- TV SETUP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Enter 4-digit access code
3
3
– V-CHIP SET UP –
B
NC-17
Rating Category Explanations
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
X
Mature audience only
4
_ _ _ _
Select “CHANGE CODE”
– V-CHIP SET UP –
B
TV RATING
MPAA RATING
CHANGE CODE
Enter 4-digit access code
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
5
Press Arrow (K/L) to point to your
desired item.
Then, press ENTER to select
[BLOCK] or [VIEW].
• When you select the rating category and turn it [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.
• When you turn “G” to [VIEW], the all ratings will
turn to [VIEW] automatically.
5
ACCESS CODE
Press the number buttons to enter
your desired access code in the
NEW CODE space. Then, enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
• If you enter wrong code, repeat step 4, making
sure you enter the same new code exactly in the
confirm code space.
Select your desired item
G
PG
PG–13
B R
NC–17
X
Enter 4-digit access code
Press Arrow (K/L) to point to
“CHANGE CODE".
Then, press ENTER.
TV RATING
MPAA RATING
CHANGE CODE
4
Selection
G
PG
PG-13
R
- TV SETUP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Press the number buttons. The
default code is 0000.
_ _ _ _
Select “MPAA RATING”
Press Arrow (K/L) to point to
“MPAA RATING”.
Then, press ENTER.
2
ACCESS CODE
Press the number buttons. The
default code is 0000.
Select “V-CHIP SET UP”
Press SETUP on the remote control.
Press Arrow (K/L) to point to “VCHIP SET UP”.
Then, press ENTER.
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
Exit the V-Chip setting mode
Press SETUP on the remote control to return to original mode.
NOTE:
• If you unplug the power code or power failure
occurs, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
Exit the V-Chip setting mode
Press SETUP on the remote control to return to original mode.
– 18 –
EN
0C28
DVD SECTION
ABOUT THE DISCS
PLAYABLE DISCS
DISC TYPES
The following discs can be played back on this TV/DVD.
[DVD]
Data on a DVD is divided into sections called "titles", and
then into subsections called "chapters", each of which is
given a title or chapter number. Playback conditions are
preset on some DVD video discs, and these playback conditions take priority over user operations on this
TV/DVD. If a function you selected does not run as
desired, refer to the manual accompanying the disc.
¡DVD video
¡DVD-R/RW*
¡DVD+R/RW*
¡Audio CD
¡CD-R/RW*
¡MP3*
* Depending on the types or the writing method of the
medium some discs can not be played.
• Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs
made on personal computers, or on DVD recorders may
not be played back properly due to the factors such as
scratches, dirt or special properties of the disc.
• Discs made on personal computers may not be played
back properly due to the different environment or the
settings of the application you use. We recommend
always to use the standardized, rightly formatted discs.
(Please contact the sales agency for more detail).
This TV/DVD conforms to the NTSC color system. You
cannot play discs recorded in other color systems such as
PAL or SECAM.
¡Some discs include region codes as shown below.
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
[AUDIO CD]
Data on an audio CD is divided into sections called
“tracks”, each of which is given a track number.
Example
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
¡The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format
can only be played back on TV/DVD with the same
region code.
The following discs cannot be played back on this
TV/DVD.
¡DVD with region codes other than 1 or ALL
[MP3]
Data on an MP3 is divided into sections called "groups",
and then into subsections called "tracks", each of which is
given a group or track number.
¡DVD-ROM
¡DVD-RAM (Never play back, otherwise malfunc-
Example
Group 1
tion may result.)
¡CD-ROM
Track 1
Track 2
Track 3
Group 2
Track 4
Track 5
Track 6
¡VSD
¡CDV (Only plays back the audio part.)
¡CD-G (Only plays back the sound.)
¡CD-I (Never play back, otherwise malfunction
may result.)
¡SACD
¡Photo CD (Never play back, otherwise malfunc-
tion may result.)
¡Video CD (Never play back, otherwise malfunc-
tion may result.)
Any other discs without compatibility indications.
– 19 –
EN
0C28
PLAYING A DISC
BASIC PLAYBACK
DVD-V
GENERAL FEATURES
CD
Getting started
¡Turn on the power of amplifier and any other com-
ponents, if necessary.
1 Press POWER.
¡The power will turn on.
2 Press OPEN/CLOSE to open disc loading
DVD may contain menus to navigate the disc and
access special features. Press appropriate number buttons or use Arrow (L/K/B/s) to highlight your selection in the DVD main menu and press ENTER to confirm.
NOTES
¡Select DVD mode by pressing SELECT on the
remote control. Then, press PLAY or OPEN/CLOSE
before you operate the DVD functions.
¡Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
tray.
3 Place the chosen disc in the tray, with the
label facing up.
DISC MENU
DVD-V
1 Press DISC MENU on the remote control.
¡The DVD main menu will appear.
2 If the feature is not available,
4 Press PLAY.
¡The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, press
PLAY.
¡When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to “TITLE MENU”.
symbol
may appear on the TV screen.
3 If disc menu is available on the disc, audio
language, subtitle options, chapters for the
title and other options will appear for selection.
4 Press Arrow (L/K/B/s) to select an item,
and ENTER to confirm selection.
5 Press STOP to stop playback.
TITLE MENU
NOTES
¡When the DVD mode has been switched to the TV
mode, the DVD mode shuts down first and then TV
picture and sound appears in about 4 seconds.
Similarly, when POWER is pressed to turn off in the
DVD mode, this mode shuts down first and then the
TV/DVD’s power is turned off.
¡A “prohibited icon” may appear at
the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc.
¡With DVDs that use titles for playback program signals, playback may start from the second title, or it
may skip these titles.
¡During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a malfunction.
DVD-V
1 Press TITLE on the remote control.
¡The title menu will appear.
2 If the feature is not available,
symbol
may appear on the TV screen.
3 Press Arrow (L/K/B/s) to select an item,
and ENTER to confirm selection.
CALLING UP A MENU SCREEN
DURING PLAYBACK
For DVD-Vs
¡Press DISC MENU to call up the DVD menu.
¡Press TITLE to call up the title menu.
NOTE
¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
EN
– 20 –
0C28
FAST FORWARD/REVERSE
SEARCH
RESUME
DVD-V
CD
DVD-V
1 During playback, press STOP.
¡Resume message will appear on the TV screen.
MP3
1 During playback, press FWD g or REV h
repeatedly to select the required forward or
reverse speed: x2, x8, x50, x100.
2 Press PLAY, playback will resume from the
point at which playback was stopped.
¡To cancel resume, press STOP twice.
¡If turn off the TV/DVD, resume function will be
¡For audio CDs, the speed is fixed at ×16.
¡For MP3, the speed is fixed at ×8.
2 To return to normal playback, press PLAY.
cancelled.
Note for using buttons on the main unit:
During playback, press and hold down the SKIP G /
SEARCH g or SKIP H /SEARCH h on the
TV/DVD for a few seconds to begin Search in x2
speed. Press and hold down again to change speed to
x8. Repeat this procedure to change to x50 and x100.
PAUSE
DVD-V
CD
CD
1 During playback, press PAUSE.
¡Playback will pause and sound will be muted.
SLOW FORWARD /
SLOW REVERSE
2 To continue playback, press PLAY.
DVD-V
1 During playback, press PAUSE.
STEP BY STEP PLAYBACK
2 Press FWD g or REV h .
DVD-V
3 Press FWD g or REV h repeatedly to
1 During playback, press PAUSE.
select the required speed: 1/16, 1/8, 1/2 of
the normal playback.
¡Playback will pause and sound will be muted.
4 To return to normal playback, press PLAY.
2 The disc goes forward by one frame each
time PAUSE is pressed.
3 To exit step by step playback, press PLAY.
Note for using buttons on the main unit:
Press PAUSE, then, press and hold down the SKIP G
/ SEARCH g or SKIP H/SEARCH h on the
TV/DVD for a few seconds to begin Search in 1/16
speed of the normal playback. Press and hold down
again to change speed to 1/8. Repeat this procedure to
change to 1/2.
– 21 –
EN
0C28
SEARCH FUNCTION
TRACK SEARCH
TIME SEARCH
CD
DVD-V
There are three ways to begin playback on an Audio
CD at a specific track.
CD
1 During playback, press SEARCH MODE
three times (CD: twice) to display the Time
Search on the TV screen.
Using the number buttons on the remote control
2 Within 30 seconds, enter a desired disc
1 Press the number buttons to enter the
desired track number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
time using the number buttons.
¡Playback will start at the specified time.
¡Press CLEAR to erase the incorrect input.
(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6.
MARKER SETUP SCREEN
DVD-V
Using SEARCH MODE
1 Press SEARCH MODE.
¡The Track search display appears.
CD
Use markers to memorise your favorite places on a
disc.
2 Within 30 seconds, select a desired track
1 Press SEARCH MODE four times (CD: three
number using the number buttons.
¡For single digits press 0 first.
¡Playback will start at the selected track.
times) during playback.
¡The display screen and Markers will appear on the
TV screen.
Using SKIP H G
During playback, press SKIP G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.
¡If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the
next track.
NOTE
¡SKIP H G are not available when playback is
stopped.
2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “- : - - : - -”
appears in the display.
3 When reaches the desired point, press
ENTER.
¡The title or track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press SEARCH
MODE four times (CD: three times) during
playback and Arrow (s/ B) to choose the
desired marker, then press ENTER.
TITLE / CHAPTER SEARCH
DVD-V
1 Press SEARCH MODE once for the Chapter
search, twice for the Title search during
playback.
NOTES
¡Opening the disc tray or turning off the power or
select AC at step 2 and press ENTER will erase all
Markers.
¡To clear a marker, using Arrow (s/ B), position the
cursor on to the marker number to be cleared and
press CLEAR.
¡You can mark up to 10 points.
/2
5 Press SEARCH MODE or RETURN to exit.
2 Enter the desired chapter/title number using
the number buttons.
¡Playback will start at the selected chapter or track.
¡Press CLEAR to erase the incorrect input.
¡For single digits press 0 first.
– 22 –
EN
0C28
SPECIAL PLAYBACK FUNCTION
REPEAT
PROGRAM
REPEAT is available only during playback.
CD
REPEAT TITLE / CHAPTER
DVD-V
To activate the repeat function, press REPEAT
during playback.
¡The repeat mode changes as described below every
time you press the button.
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
OFF
(repeat off)
NOTES
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.
1 In stop mode, press MODE.
¡The PROGRAM screen will appear.
2 Press Arrow (▲/▼) to select a track, then
press ENTER.
¡Press CLEAR to erase the
TOTAL
most recently entered program.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4 Press PLAY to play the programmed tracks.
REPEAT TRACK
CD
To activate the repeat function, press REPEAT
during playback.
¡The repeat mode changes as described below every
time you press the button.
TRACK
(current track repeat)
You may determine the order in which tracks will play.
ALL
(entire disc repeat)
OFF
(repeat off)
NOTES
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during repeat AB playback.
NOTES
¡While the program is being played back, the STOP
works as follows.
¡Press STOP once and then PLAY again, playback
will restart from the point where STOP was pressed.
(Program continued)
¡Press STOP twice and then PLAY again, playback will
restart from the track in the usual way. (Program cleared)
¡Up to 99 programs can be entered.
¡If you like to repeat the current track in the program,
press REPEAT repeatedly until
TRACK appears
during playback. If you like to repeat the entire program press REPEAT repeatedly until
ALL
appears during playback.
RANDOM PLAYBACK
REPEAT A-B
DVD-V
CD
CD
1 Press REPEAT A-B at your chosen starting
This shuffles the playing order of tracks instead of
playback in the sequence.
point.
¡
A- appears briefly on the TV screen.
2 Press REPEAT A-B again at your chosen
1 In stop mode, press MODE twice.
¡RANDOM screen appears.
RANDOM
CD [AUDIO]
end point.
¡
A-B appears briefly on the TV screen, and the
repeat sequence begins.
TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
PLAY
3 To exit the sequence, press REPEAT A-B.
NOTES
2 Press PLAY to start random playback.
¡The repeat A-B section can only be set within the cur- NOTE
rent title (for DVDs), or current track (for audio CDs). ¡If you like to repeat the current track in the random
¡Repeat A-B is not available with some scenes in DVD.
selection, press REPEAT repeatedly until
¡To cancel the A point which was set, press CLEAR.
TRACK appears during playback. If you like to
repeat the entire random selection press REPEAT
¡Repeat A-B playback does not function during title,
repeatedly until
ALL appears during playback.
chapter, track or all repeat playback.
EN
– 23 –
0C28
PLAYING A MP3 DISC
MP3 PLAYBACK
TRACK SELECTION
MP3
MP3
When a CD with MP3 files is in the TV/DVD, the
MP3 menu will appear on the TV screen in stop mode.
1 Press SEARCH MODE during playback.
¡The FILE LIST will appear.
1 In stop mode, press Arrow (K/L) to select
2 Select a desired track using Arrow
(K/L/s/B).
the desired group track.
¡If a group is selected, press B
or ENTER to go on to the
track selection screen. Press
Arrow (K /L ) to choose a
track, then press ENTER.
¡If a track is selected, press
ENTER to start playing
tracks. Starting from the one you’ve just chosen the
subsequent tracks will be played.
¡Choose FIRST PLAY to start playback from the
beginning of the listed tracks.
¡Press TITLE to return to the first item.
¡Press B when you want to go to the next hierarchy.
¡Press s when you want to go back to the previous
hierarchy.
3 Press PLAY to start playback.
NOTES
¡Press SEARCH MODE to exit.
¡Some selections may take a while to be recognized.
PROGRAM
MP3
2 Press STOP to stop playback.
NOTES
¡Folders are known as Groups; files are known as
Tracks.
¡MP3 files are accompanied by 3 icon.
¡Maximum of 255 folders can be recognized.
¡Maximum of 512 files can be recognized.
¡Up to 8 hierarchies can be created.
This TV/DVD recommends the use of files recorded at
the below specifications:
¡Sampling frequency: 44.1kHz or 48kHz
¡Constant bit rate: 112kbps ~ 320kbps.
This feature allows you to program an MP3 disc to
play in a desired sequence.
1 In stop mode, press MODE.
¡The PROGRAM screen will appear.
2 Select a desired track using Arrow
(K/L/s/B). Then, press ENTER.
¡Press B when you want to go to the next hierarchy.
¡Press s when you want to go back to the previous
hierarchy.
¡Press CLEAR to erase the most recently entered pro-
gram.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4 Press PLAY to start programmed playback.
RANDOM PLAYBACK
MP3
1 In stop mode, press MODE twice.
¡RANDOM screen appears.
2 Press PLAY to start random playback.
– 24 –
EN
0C28
CHANGING THE SETTINGS
SUBTITLE LANGUAGE
CAMERA ANGLE
DVD-V
DVD-V
The TV/DVD allows you to select a language for subtitles during DVD disc (if available) playback.
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the (
) icon appears on the
screen.
1 Press SUBTITLE during playback.
2 Press SUBTITLE repeatedly to select your
desired subtitle language.
¡The subtitle language will be displayed on the dis-
play bar at the top of the screen.
1 Press ANGLE during playback.
¡The selected angle will be displayed on the display
bar at the top of the screen.
2 Press ANGLE repeatedly to select your
3 To turn off subtitles, press SUBTITLE
desired angle.
repeatedly until OFF appears.
NOTES
¡Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
¡If the desired language is not shown after pressing
SUBTITLE several times, the disc does not have
subtitles in that language.
¡If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 27.)
AUDIO LANGUAGE
BLACK LEVEL SETTING
DVD-V
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Press MODE during playback.
ON
2 Press ENTER to switch ON/OFF.
DVD-V
The TV/DVD allows you to select a language during
DVD disc (if multi language available) playback.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
3 Press MODE twice or RETURN to exit.
VIRTUAL SURROUND
1 Press AUDIO during playback.
2 Press AUDIO repeatedly to select your
DVD-V
desired language.
NOTE
¡Pressing AUDIO may not work on some DVDs with
multiple audio languages (e.g. DVDs which allow
audio language setting on the disc menu).
CD
MP3
You can enjoy stereophonic visual space on your existing stereo system.
1 Press V.SURR once or MODE twice
(CD/MP3: once) during playback.
STEREO SOUND MODE
OFF
CD
1 Press AUDIO repeatedly during playback to
select between STEREO, L-CH or R-CH.
¡STEREO - both right and left channels are active
2 Press ENTER to set it 1 (Natural effect) or 2
(Emphasized effect) or OFF.
(stereo)
3 Press V.SURR or MODE or RETURN to exit.
L-CH - only left channel is active
NOTE (for CD play only)
R-CH - only right channel is active
¡Virtual Surround will not be effective if the sound
NOTE
mode is set to something other than STEREO.
¡If the Virtual Surround setting is ON, the sound
mode will be fixed to STEREO, and can not be
EN
– 25 –
changed.
0C28
THE ON-SCREEN INFORMATION
DVD-V
CD
MP3
You can check the information about the current disc by pressing DISPLAY on the remote control.
For DVD-Vs
For audio CDs
1 Press DISPLAY during playback to show
1 Press DISPLAY during playback to show the
current Chapter.
current Track.
¡The elapsed and remaining playing time of the cur-
¡The elapsed and remaining
playing time of the current
chapter will be displayed.
9/49
rent track will be displayed.
0:00:00 -0:00:00
2 Press DISPLAY again to show current Total
2 Press DISPLAY again to show current Title.
¡The elapsed and remaining playing time of the cur-
Track.
¡The elapsed and remaining playing time of the cur-
rent title will be displayed.
rent total track will be displayed.
3 Press DISPLAY again.
¡The BIT RATE and the current repeat setting will be
3 Press DISPLAY again to exit the display.
displayed.
¡If you are playing a dual layered disc, the layer num-
ber will also be displayed (L0: Layer 0 is playing.
L1: Layer 1 is playing).
4 Press DISPLAY again to exit the display.
For MP3
1 Press DISPLAY during playback.
¡The name of the file currently in play will be displayed.
2 Press DISPLAY again to show the track
number, the repeat status, and the playback
status at the top of the screen.
¡
will be displayed when repeat play has been
selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat
3 Press DISPLAY again to exit the display.
– 26 –
EN
0C28
CHANGING THE DVD SETUP ITEMS
LANGUAGE SETTING
DVD-V
Language options are not available with some discs.
1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,
then SETUP twice.
SETUP
QUICK
CUSTOM
INITIALIZE
2 Press Arrow L to select “CUSTOM”, then
press ENTER.
¡CUSTOM mode will appear.
3 Press Arrow (K/ L) to select “LANGUAGE”,
then press ENTER to confirm.
SETUP
CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
4 Press Arrow (K/ L) to select the next items,
then press ENTER.
AUDIO:¡Sets the audio language.
SUBTITLE:¡Sets the subtitle language.
DISC MENU:¡Sets the language for DVD menu.
5 Press Arrow (K/ L) to select a setting, then
press ENTER.
¡If OTHER is selected on the AUDIO, SUBTITLE or
DISC MENU screen, press four-digit number to
enter the code for the desired language. (Refer to the
language code list.)
¡Only the languages supported by the disc can be
selected.
6 Press SETUP to exit.
NOTE
¡Language Setting for Audio and Subtitle is not available with some discs. Then use the AUDIO and the
SUBTITLE button. Details are on page 25.
Language
Code Language
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
TO CHANGE THE ON-SCREEN MENUS
You can access the TV SETUP menu by pressing
SETUP from the DVD mode. Refer to “Selecting the
Language” on page 13 to changing the on-screen
menus.
Code
L-N
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Audio or Subtitle language setting on page 25. If
you choose any other languages, ‘---’ will be displayed
instead. (3 letter language code is written in bracket.)
– 27 –
EN
0C28
DISPLAY SETTING
AUDIO SETTINGS
DVD-V
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD
discs.
1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,
1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
then SETUP twice.
¡ If the menu does not appear, press PLAY, STOP,
then SETUP twice.
SETUP
SETUP
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
2 Press Arrow L to select “CUSTOM”, then
2 Press Arrow L to select “CUSTOM”, then
press ENTER.
¡CUSTOM mode will appear.
press ENTER.
¡CUSTOM mode will appear.
3 Press Arrow (K/ L) to select “AUDIO”, then
3 Press Arrow (K/ L) to select “DISPLAY”,
press ENTER to confirm.
then press ENTER to confirm.
SETUP
SETUP
CUSTOM
CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
LANGUAGE
DISPLAY
AUDIO
PARENTAL
4 Press Arrow (K/ L) to select the below
4 Press Arrow (K/ L) to select the below
items, then press ENTER.
TV MODE: QUICK
¡Press Arrow (K/L) for an item selection, then press
ENTER.
¡Select 4:3 LETTER BOX for a black bars appears
on top and bottom of the screen.
¡Select 4:3 PAN & SCAN for a full height picture
with both sides trimmed.
¡The default setting is 4:3 LETTER BOX.
STILL MODE:
¡Press Arrow (K/L) for an item selection, then press
ENTER.
¡Select “AUTO” usually.
¡If you select “FIELD”, the picture in the still mode
will be stabilized.
¡If you select “FRAME”, the picture in the still mode
will be highly defined.
ANGLE ICON:
¡Press ENTER repeatedly to turn Angle icon ON or
OFF.
¡The default setting is ON.
items, then press ENTER.
DRC (Dynamic Range Control):
¡To compress the range of sound volume.
¡The default setting is OFF.
DOWN SAMPLING:
¡Set to ON when outputting in 48 kHz.
¡The default setting is ON.
When playing disc with copyright Protection
¡If you select OFF, copyright protection will be activated and sound will be down sampled at 48kHz.
DOLBY DIGITAL: QUICK
Set to On when the unit is connected to a Dolby Digital
Decoder.
(ON: Output by Dolby Digital)
(OFF: Convert the Dolby Digital to PCM (2 channel
stereo))
¡The default setting is ON.
AUTO POWER OFF:
¡Press ENTER repeatedly to turn Auto Power off ON
or OFF.
¡The default setting is ON and it will turn the TV/DVD
to off automatically after 15 minutes of no use.
5 Press SETUP to exit.
5 Press SETUP to exit.
– 28 –
EN
0C28
PARENTAL CONTROL
DVD-V
Parental Control limits the disc viewing that exceed your settings. (with a password or playback will stop.)
This feature allows you to prevent discs with alternative scenes from being played by your children.
PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s ratings exceed the level you set.
CONTROL LEVELS
¡ALL
All parental lock is cancelled.
¡Level 8
DVD software of any grade (adult/general/children)
can be played back.
1 Press SETUP twice in STOP mode so that
the QUICK SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,
¡Levels 7 to 2
then SETUP twice.
Only DVD software intended for general use and
children can be played back.
SETUP
¡Level 1
Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.
QUICK
CUSTOM
INITIALIZE
2 Press Arrow L to select “CUSTOM”, then
press ENTER.
IF YOU FORGET THE PASSWORD
3 Press Arrow (K/ L) to select “PARENTAL”,
1 Press 4, 7, 3, 7 at step 4. Then enter your
then press ENTER.
SETUP
new password.
¡Password will be cleared and parental level will be
CUSTOM
set to ALL.
LANGUAGE
DISPLAY
AUDIO
PARENTAL
2 Follow Steps [5]-[7] again.
4 Enter your four-digit password then press
ENTER.
5 Press Arrow (K/ L) to select PARENTAL
LEVEL, then press ENTER.
6 Press Arrow (K/ L) to select the desired
level.
7 Press SETUP to exit
NOTES
¡When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the
password from the second time onward.
¡To change the password, press Arrow (K/L) to
select CHANGE at step 5, then press ENTER. Enter
the four-digit pass-word, then press ENTER.
¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡Record the password in case you forget it.
– 29 –
EN
0C28
TROUBLESHOOTING GUIDE
If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the
TV/DVD, consulting the following checklist.
Problem
No power
The TV/DVD does not respond to
the remote control.
Corrective Action
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
• You have to be within 23 feet of the TV/DVD.
• Check if the correct mode is selected. If not switch the mode by
pressing SELECT on the remote control,whichever you need.
TV Mode
Problem
No Picture or Sound
Bars On Screen
Picture Distorted or Blurred
Picture Rolls Vertically
Lines or Streaks in Picture
No Color
Poor Reception on Some Channels
Ghosts in Picture
Weak Picture
Sound OK, Picture Poor
Picture OK, Sound Poor
Different color marks on screen
Corrective Action
Try
a
new
channel,
if
OK,
then possible station trouble.
•
Make
sure
the
power
is
turned
on.
•
• Press SELECT on the remote control to select TV mode. Then try
other TV feature.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust COLOR control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Check for local interference.
• Magnetism from nearby appliances and geomagnetism might affect
the color of the TV picture. Move the TV/DVD away from the appliances, the TV/DVD can repair itself automatically. If you want to
repair immediately, unplug the TV/DVD power cord, then plug it in
again 30 minutes or so later.
– 30 –
EN
0C28
Closed Caption Problem
My TV is showing captions
that are misspelled.
Possible Remedy
• You are watching a live broadcast and spelling errors made by the
• closed captioning production company may pass through uncorrected.
• A prerecorded program will not show any misspelled words because
• of the normal time available for editing the captions.
My TV will not show the text
• Captions that are delayed a few seconds behind the actual dialogue
in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies
what is being said.
• can display a dialogue to a maximum of 220 words per minute. If a
• dialogue exceeds that rate, selective editing is used to insure that the
• captions remain up-to-date with the current TV screen dialogue.
My captions are scrambled with
• Interference caused by building, power lines, thunderstorms, etc.
white boxes on the TV screen.
• may cause scrambled or incomplete captions to appear.
My program guide listed a TV show • Broadcasters may at times use a time compression process to the
as being closed captioned but none • actual program so that additional advertising time can be given.
of the captions were displayed.
• Since the decoder cannot read the compressed information,
• captions will be lost.
My TV screen shows a black box
• You are in the TEXT mode. Select CAPTION mode or CAPTION
on certain channels.
• [OFF].
DVD Mode
Problem
No picture
Disc cannot be played
No sound
No DTS audio is output
Distorted picture
Audio or subtitle language
does not match the set up
The camera angle cannot be
changed
Audio or subtitle language cannot
be changed
“Prohibited icon” appears on the
screen, prohibiting an operation
CD sound dropout
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Corrective Action
• Connect the video cables firmly.
• Insert a correct video disc that plays on this TV/DVD.
• Press SELECT on the remote control to select DVD mode. Next,
press PLAY or OPEN/CLOSE. Then, try other DVD feature.
• Insert the disc.
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control level.
• Connect the audio cables firmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This TV/DVD does not support DTS audio. This is not a malfunction.
• There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
• The selected language is not available for audio or subtitles on the
DVD.
This is not a malfunction
• The DVD does not contain sequences recorded from different camera
angles. This is not a malfunction
• The DVD does not contain audio source or subtitles in the selected
language. This is not a malfunction.
• That operation is prohibited by the TV/DVD or the disc.
This is not a malfunction.
• Scratched disc. Replace the disc with unscratched one.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
– 31 –
EN
0C28
MAINTENANCE
CABINET CLEANING
SERVICING
• Wipe the front panel and other exterior surfaces of
• Should your TV/DVD become inoperative, do not
•
the TV/DVD with a soft cloth immersed in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/DVD. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and please call our help line at 1-800256-2487, to locate an Authorized Service Center.
IF THE LASER OPTICAL PICKUP UNIT IS DIRTY
• If the TV/DVD still does not perform properly when it is operated while referring to the relevant sections and
to "TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty.
Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup
unit.
DISC HANDLING
• Use discs which have the following logos on them.
(Optical audio digital discs.)
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.
• Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it
is not used.
– 32 –
EN
0C28
SPECIFICATIONS
GENERAL SPECIFICATIONS
TV
CRT :
20 inch in-line gun,
90˚ deflection tube
Television system:
NTSC-M
TV Standard
Closed caption system: §15.119/FCC
Channel coverage:
VHF:
2 ~ 13
UHF:
14 ~ 69
CATV:
2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System:
181 channel
frequency synthesized
tuning system
Channel access:
Direct access keyboard,
programmable
scan and up/down
ELECTRICAL SPECIFICATIONS
Sound output:
OTHER SPECIFICATIONS
Terminals
Antenna input:
Video input:
Audio L/R input:
Headphone:
Coaxial digital
audio output
(only DVD):
Remote control:
Operating
temperature:
Power requirements:
Power consumption
(Maximum) :
Dimensions :
DVD
Discs:
DVD video, Audio CD
Output signal format: NTSC color
Frequency response
(output jack)
DVD (linear sound): 20 Hz to 22 kHz
(sample rate: 48 kHz)
20 Hz to 44 kHz
(sample rate: 96 kHz)
CD:
20 Hz to 20 kHz
Signal-to-noise ratio
(S/N ratio)(output jack)
CD:
80 dB (EIAJ)
Dynamic range
(output jack)
DVD (linear sound): 85 dB
CD:
82 dB (EIAJ)
Total distortion factor
CD:
0.07% (EIAJ)
Wow and flutter:
Below the measurement
limitation (+/-0.001%
W PEAK) (EIAJ)
2 speakers, 1W, 8 ohm
Weight :
VHF/UHF/CATV
75 ohm unbalanced (F-type)
RCA connector [ 1
RCA connector [ 2
1/8” stereo (3.5 mm)
One pin jack,
500m Vpp (75 ohm)
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
AC 120V, 60Hz
80W
H:20-3/16”(513.5mm)
W:20-3/16”(512mm)
D:19-13/16”(503mm)
49.6lbs(21.0kg)
• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will be English.
– 33 –
EN
0C28
INDICE
■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 34
PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 34
MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 34
VISTA POTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 35
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 35
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 35
CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 36
CONEXIÓN A UN AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA DIGITAL, PLATINA
MD O PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . 36
CONEXCIONA UN DECODIFICADOR DOLBY
DIGITAL (Para DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TV SECTION
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 37
SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 37
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DVD SECTION
■ REPRODUCCIÓN DE UN DVD DE VÍDEO O UN
CD DE AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
REPRODUCCION BASICA . . . . . . . . . . . . . . . . . . . . . . 38
CONTROLES DE
OPERACIÓN Y FUNCIONES
PANEL FRONTAL DEL
TELEVISOR/DVD
Consulte la figura 1 de la página 8
MANDO A DISTANCIA
Consulte la figura 2 de la página 8
VISTA POSTERIOR
Consulte la figura 3 de la página 9
1. Bandeja de carga del disco
2. Toma de entrada VIDEO
Conecte aquí la toma de salida de vídeo de una
videocámara o de una videograbadora.
3. Tomas de entrada AUDIO L/R
Conecte aquí las tomas de salida de audio de una
videocámara o de una videograbadora.
4. Botón POWER
Púlselo para conectar y desconectar la alimentación.
5. Botones VOLUME K/L(VOL.m/n)
Púlselos para controlar el nivel del volumen para el
DVD y el televisor.
6. Botones CHANNEL K/L(CH. K/L)
Púlselo para seleccionar el canal memorizado.
Púlselo para cambiar a un modo de televisor cuando
esta en el modo de DVD.
7. Ventanilla del sensor del mando a distancia
8. Botón STOP
Detiene la operación del disco.
9. Botón SKIP H
Reproduce desde el inicio del capítulo o canción actual.
Botón SEARCH (REV) h (panel delantero)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción hacia atrás.
10. Botón PLAY
Inicia la reproducción del contenido del disco.
Púlselo para cambiar a un modo de DVD cuando esta
en el modo de televisor.
11. Botón SKIP G
Reproduce desde el inicio del siguiente capítulo o
canción.
Botón SEARCH (FWD) g (panel delantero)
Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción en avance.
12. Botón PAUSE
Hace una pausa en la operación del disco.
13. Botón OPEN/CLOSE
Púlselo para insertar discos en la bandeja o retirarlos
de ella.
14. Toma HEADPHONE
Para conectar auriculares (no suministrados) y
escuchar en privado.
15. Botón MODE
Activa el modo de reproducción programada o el
modo de reproducción aleatoria cuand se reproducen
CDs o MP3.
16. Botones de números
Modo del televisor:
Pulse dos dígitos para tener acceso directamente al
canal deseado.
Recuerde pulsar "0" antes de elegir un canal de un
solo dígito.
Botón +100
Púlselo para seleccionar canales de televisión por
cable cuyo número sea igual o superior al 100.
Modo DVD:
Púlselo para introducir el número deseado.
Botón +10
Púlselo para introducir los números deseados cuyo
número sea igual o superior al 10.
17. Botón SLEEP
Pulse el botón SLEEP para visualizar el temporizador
para dormir y activar la función. La hora de apagado
puede determinarse por el número de veces que usted
pulsa el botón. (0, 30, 60, 90 o 120 minutos)
18. Botón REV h
Presione para ver la imagena en DVD en retroceso
rápido. Presione PAUSE y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad en
avance de la cámara lenta.
Botón FWD g
Presione para avanzar rápidamente en el disco.
Presione PAUSE y presione este botón para empezar
la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad
de avance de la cámara lenta.
19. Botón V.SURR
Púlselo para activar/desactivar el envolvente virtual.
20. Botón SETUP
Púlselo para activar o salir del modo de menús de
televisor o preparación de DVD.
– 34 –
ES
0C28
21. Botón TITLE
Visualiza el menú de títulos.
22. Botón CLEAR
Repone un ajuste.
23. Botón DISPLAY
Modo del televisor:
Púlselo para visualizar el número del canal en la
pantalla. Si lo pulsa de nuevo, el número del canal
desaparecerá.
Modo de DVD:
Visualiza el estado actual en la pantalla del televisor
con fines de comprobación.
24. Botón SEARCH MODE
Púlselo para localizar un punto deseado.
25. Botón AUDIO
Púlselo para seleccionar un idioma de audio o un
modo de sonido deseado.
26. Botón SUBTITLE
Púlselo para seleccionar un idioma de subtítulos
deseado.
27. Botón REPEAT
Repite la reproducción del disco, título, capítulo o
pista actual.
28. Botón ANGLE
Púlselo para cambiar el ángulo de la cámara y ver,
desde un ángulo diferente, la secuencia que está
siendo reproducida.
29. Botón A-B REPEAT
Repite la reproducción de una sección seleccionada.
30. Botón RETURN
Vuelve a la operación anterior en el modo de
instalación del DVD.
31. Botón ENTER
Púlselo para establecer un ajuste.
32. Botones de flechas
Modo de televisor:
Púlselo para seleccionar un modo de ajuste desde el
menú que aparece en la pantalla del televisor.
Púlselo para seleccionar o ajustar desde un menú
particular.
Modo de DVD:
Se utiliza cuando se hacen ajustes mientras se
observa la visualización en una pantalla de televisor.
33. Botón DISC MENU
Visualiza menús en el DVD.
34. Botón SELECT
Púlselo para cambiar a un modo de televisor, modo
de entrada externa o modo de DVD.
NOTA: Cuando seleccione el modo DVD con
este botón, pulse primero PLAY u
OPEN/CLOSE. De lo contrario, las funciones del
DVD no se activarán.
35. Botón MUTE
Pulse el botón MUTE para apagar el sonido de un
programa de TV. (La visualización del nivel del
sonido cambia de ROJO CLARO a AZUL CLARO.)
Pulse de nuevo el botón MUTE o el botón VOL m o
n para restaurar el sonido.
36. Botón PICTURE
Presione para entrar en el modo de ajuste de imagen.
37. Cable de alimentaciónConéctelo a una toma de
CA convencional (120 V/60 Hz).
NOTA: Retire el cable de alimentación del gancho
para evitar romperlo antes de conectarlo a una
toma de CA convencional.
38. Toma de salida de audio digital COAXIAL
(DVD Audio solamente)
Conéctela a la entrada digital de un amplificador o
decodificador externo.
39. Toma de entrada ANT.
Conéctela a una antena, sistema de televisión por
cable o sistema de satélite.
PARA INSERTAR LAS PILAS
1) Abra la cubierta del compartimiento de las pilas
empujando la cubierta del mando a distancia en el
sentido de la flecha.
2) Inserte 2 pilas "AA" en el compartimiento de las
pilas, en el sentido indicado por las marcas de
polaridad (+/-).
3) Vuelva a poner la cubierta.
NOTAS:
• No mezcle pilas alcalinas y de manganeso.
• No mezcle pilas viejas y nuevas.
PREPARACIÓN PARA LA
UTILIZACIÓN
CONEXIONES DE
ANTENA/CABLE
Consulte la figura 4 de la página 10
Nota para el instalador de sistemas CATV
Esta nota tiene la finalidad de llamar la atención del
instalador de sistemas CATV para que tenga en
cuenta el Artículo 820-40 del NEC, el cual
proporciona consejos para hacer una conexión a
tierra apropiada y, en particular, especifica que la
tierra del cable deberá estar conectada al sistema de
puesta a tierra del edificio, tan cerca del punto de
entrada del cable como sea posible.
NOTA:
Antes de enchufar la antena a la toma ANT.IN del
televisor/DVD, compruebe que la clavija no esté
doblada. Si esta doblada, póngala derecha como se
muestra en la ilustración, y luego conéctela en la
toma ANT.IN del televisor/DVD.
Clavija doblada
Cable
Clavija
(Necesita enderezarse) (Clavija derecha)
ANTENA COMBINADA DE VHF/UHF
La antena combinada de VHF/UHF de 75 ohmios
puede conectarse al terminal ANT.
– 35 –
ES
0C28
ANTENA SEPARADAS DE VHF/UHF
En algunas zonas será necesario utilizar una antena
exterior.
TELEVICION POR CABLE SIN CAJA
DE CONVERTIDOR / DECODIFICADOR
Utilice esta conexión si su sistema de televisión por
cable se conecta directamente a su televisor/DVD sin
una caja de convertidor. Utilice el mando a distancia
del televisor/DVD para seleccionar los canales.
NOTA:
• Cuando conecte una videograbadora monofónica
(otra fuente) a este televisor/DVD, conecte la toma
de salida de audio de la videograbadora
monofónica (otra fuente) a la toma AUDIO L de
este televisor/DVD. El audio saldrá igualmente por
los canales izquierdo y derecho.
Consulte la figura 5 de la página 11
TELEVICION POR CABLE CON CAJA
DE CONVERTIDOR/DECODIFICADOR
O CAJA DE SATRLITE
Si su compañía de televisión por cable le suministra
una caja de convertidor, o si usted utiliza un sistema
de satélite, usted podrá utilizar la conexión básica
mostrada aquí.
La selección de los canales deberá hacerse con la caja
de convertidor o con la caja de satélite. Esto significa
que los canales no se podrán cambiar utilizando el
mando a distancia del televisor/DVD.
PARA VER UN CANAL
CODIFICADO/DECODIFICADO
1) Ponga el selector de canales del televisor/DVD
en la posición del canal de salida de la caja de
convertidor de televisión por cable o de la caja de
satélite. (Ej., CH3)
2) Seleccione el canal que va a ver en su caja de
convertidor de televisión por cable o caja de
satélite.
CONEXIÓN A TOMAS DE
ENTRADA EXTERNA
Cuando vea un programa grabado en otra fuente
(videograbadora o videocámara), utilice las tomas de
entrada de audio/vídeo de la parte delantera del
televisor/DVD.
Conecte las tomas de salida de audio/vídeo de otra
fuente a las tomas AUDIO L/R y VIDEO de este
televisor/DVD. Luego pulse SELECT hasta que
aparezca "AUX" en la pantalla.
CONEXIÓN A UN
AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA
DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD)
Utilice un cable digital coaxial de audio de venta en
el comercio especializado para hacer las conexiones
de audio.
Consulte la figura 6 de la página 11
NOTAS:
• La fuente de audio de un disco en un formato de
sonido ambiental Dolby Digital de 5,1 canales no
se puede grabar como sonido digital mediante una
platina MD o DAT.
• Asegúrese de desconectar la alimentación de todos
los componentes antes de conectar otro
componente.
• Consulte los manuales del propietario de los
componentes que va a conectar al televisor/DVD.
• Ponga DOLBY DIGITAL en OFF para la salida de
audio en el modo de preparación. La reproducción
en un televisor/DVD utilizando ajustes incorrectos
puede causar distorsión de ruido, y también se
pueden dañar los altavoces. (Consulte la página 28
para poner DOLBY DIGITAL en OFF.)
– 36 –
ES
0C28
CONEXCIONA UN
DECODIFICADOR DOLBY
DIGITAL (Para DVD)
TV SECTION
Si utiliza este televisor/DVD para reproducir un disco
DVD en un formato de sonido ambiental Dolby
Digital de 5,1 canales, el televisor/DVD dará salida a
un flujo de datos DOLBY DIGITAL desde su toma
de salida de audio digital COAXIAL. Conectando el
reproductor a un decodificador Dolby Digital, usted
podrá disfrutar de un ambiente más convincente y
real, con un sonido ambiental potente y de alta
calidad similar al de los cines.
Utilice cables digitales coaxiales de audio disponibles
en el comercio especializado para hacer las
conexiones de audio.
Consulte la figura 7 de la página 12
NOTAS:
• Asegúrese de desconectar la alimentación de todos
los componentes del sistema antes de conector a
otro componente.
• Consulte los manuales del propietario de los
componentes que vaya a conectar al televisor/DVD.
• Si conecta un decodificador Dolby Digital, ponga
DOLBY DIGITAL en ON para la salida de audio
en el modo de preparación. (Consulte la página 28
para poner DOLBY DIGITAL en ON.)
• A menos que se haga la conexión a un
decodificador Dolby Digital , ponga DOLBY
DIGITAL en OFF para la salida de audio en el
modo de preparación. La reproducción en el
televisor/DVD utilizando ajustes incorrectos puede
generar distorsión de ruido, y también puede
estropear los altavoces.
PREPARACIÓN PARA LA
UTILIZACIÓN
SELECCIÓN DE IDIOMA
TV
1
Enchufe el cordón de alimentación
del televisor/DVD
Enchufe el cordón de alimentación del
televisor/DVD en una toma de CA estándar.
NOTA:
• Si aparecen algunas cifras en la esquina de la pantalla, pulse el botón POWER sin desenchufar el
cordón de alimentación.
Asegúrese de que ...
• Pulse el botón POWER para encender el televisor/DVD.
NOTA: Esta función afecta sólo el idioma en el menú
de la pantalla y no la fuente de audio.
2
Seleccione “LANGUAGE”
Pulse el botón SETUP en el mando
a distancia.
Pulse el botón K o L para señalar
“LANGUAGE”.
3
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
Seleccione “ENGLISH”, “ESPAÑOL” o “FRANÇAIS”
Seleccione “ENGLISH”, “ESPAÑOL” o
“FRANÇAIS” con el botón ENTER.
Fabricado bajo licencia de Dolby
Laboratories. “Dolby” y el símbolo de la D
doble son marcas de fábrica de Dolby
Laboratories.
4
Salga del modo de idioma
Pulse el botón SETUP en el mando a distancia para
volver al modo del televisor.
NOTA: Si, por alguna razón, el menú está en español
o francés, pulse el botón SETUP en el mando a distancia, pulse el botón K para señalar el “IDIOMA
(ESPAÑOL)” o “LANGAGE (FRANÇAIS)”, a continuación, pulse el botón ENTER y pulse el botón
SETUP en el mando a distancia.
– 37 –
ES
0C28
AJUSTE DE CANAL
DVD SECTION
REPRODUCCIÓN DE UN
DVD DE VÍDEO O UN CD
DE AUDIO
TV
Puede programar el sintonizador para buscar todos
los canales que recibe en su localidad.
NOTA: El canal preparado NO es necesario cuando
esté conectado a una caja de cable o caja de satélite.
Sólo tiene que seleccionar con el selector de canal del
televisor/videograbadora al canal de salida de la caja
de cabe o caja de satélite (por ejemplo el canal CH3).
Seleccione el canal a ver en la caja de cable o caja de
satélite.
Asegúrese de que ...
• Pulse el botón POWER para encender el televisor/DVD.
1
DVD-V
CD
Para empezar
¡Conecte el interruptor del amplificador y otros
equipos, si fuera necesario.
1 Pulse el boton POWER.
¡La alimentación se conectará.
Seleccione “AJUSTE DE CANAL”
Pulse el botón SETUP en el mando
a distancia.
Pulse el botón K o L para señalar
“AJUSTE DE CANAL”.
A continuación, pulse el botón
ENTER.
2
REPRODUCCION BASICA
2 Pulse el botón OPEN/CLOSE.
–MENU–
¡La bandeja de carga del disco se abrirá.
B AJUSTE DE CANAL
AJUSTE DE V-CHIP
IDIOMA [ESPAÑOL]`
TITULO [OFF]
3 Ponga el dlsco en la bandeja con el lado
de la eliguta hacia arriba.
Empiece el prefijado automático
Pulse el botón K o L para señalar
“AUTOPROGRAMACION DE
CA”.
A continuación, pulse el botón
ENTER.
El sintonizador busca y memoriza
todos los canales activos en su localidad.
– AJUSTE DE CANAL –
AGREGAR/BORRAR (CATV)
B AUTOPROGRAMACION DE CA.
3
Después de buscar
4 Pulse el botón PLAY.
¡La bandeja se cerrará automáticamente y la
reproducción empezará luego desde el primer
capítulo o pista del disco. Si la reproducción no
empieza automáticamente, pulse PLAY.
¡Cuando reproduzca un DVD que tenga grabado un
menú de títulos, el menú aparecerá en la pantalla.
El sintonizador se detiene en el canal memorizado
más bajo.
• Cuando se activa AUTOPROGRAMACION DE
CA, donde no hay entrada de señal del televisor,
aparecerá “NO HAY SEÑAL DE TV” en la pantalla después de terminar la búsqueda de canales.
• El televisor/DVD puede reconocer los canales de
TV para que sean canales de TV de antena de cable
con las condiciones de recepción. En este caso,
pruebe nuevamente con el prefijado automático en
las condiciones de recepción fina.
– 38 –
5 Pulse el botón STOP para detener la reproducción.
ES
0C28
MEMO
– 39 –
ES
0C28
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does
not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE
PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE
UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest FUNAI Authorized Service Center or for general service procedure, please
call 1-800-256-2487 or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-256-2487
http://www.funai-corp.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in China
0EMN02487
T9004UE ★★★★★