Emerson Process Management CW_10 Modem User Manual

Product Data Document
420ds9b
July 10, 2007 - Page Bristol® ControlWave®
CW_10 and CW_30 CPU Kits
ControlWave
CW_10 CPU Kit
CW_30 CPU Kit
CW_35 CPU Kit
CW_31 CPU Kit
as IEC 61131-3 programming, Ethernet, IP and FTP
communication, support for 56 bit encrypted User
Name/Password security sign-on and multiple user
access levels. It also offers much greater execution
speed, lower power consumption and a larger and
more flexible memory model.
Overview
•
Faster performance allows more demanding
applications
•
More memory allows larger applications and
data storage
•
Lower power consumption minimizes solar and
battery requirements
•
ControlWave Designer offers increased
programming flexibility
•
Historical data is maintained on application
download for higher data integrity
The new CPU products, named CW_10, CW_30,
CW_35 and CW_31 (generically CW_XX), are
intended to offer a cost-effective upgrade path to the
ControlWave architecture for existing 33XX systems
by allowing you to maintain your investment in I/O,
wiring, cabinets and enclosures, communication
infrastructure and application program development.
The CW_XX CPUs are direct replacements for the
33XX CPUs. You can easily remove the existing
CPU and communication cards and replace them
with the new ControlWave architecture cards.
•
CW_XX dual Ethernet option allows network
segmentation without expensive external
routers
•
Enhanced security protection
•
Buffered communication ports enhance
throughput and allow multiple slave ports
•
150 MHz, ARM CPU
The CW_XX CPUs support all of the commonly
used analog, discrete and counter I/O cards, as
well as modems and radios currently installed in the
RTUs. Communication compatibility is maintained
through the same use of BSAP and Modbus protocols as were used in the 33XX.
•
Real-time clock
•
Conforms to DPC3330, 3335 and RTU3310
chassis design
•
Supports most existing 33XX I/O cards
•
ControlWave Designer IEC 61131-3
programming
•
ControlWave Designer ACOLL III function block
library
•
16MB of Flash storage memory
Introduced initially in 1988, the 3330, 3335 and
3310 have retained their status as the RTU of
choice by many loyal customers. However, with the
growing popularity of Bristol® ControlWave®, from
Emerson Process Management, the latest generation hybrid PLC/RTU products, customers have
expressed interest in an inexpensive migration path
to allow them to realize all of the benefits of the
new ControlWave technology without replacing their
entire SCADA system.
Benefits
The ControlWave architecture offers several advantages over existing 3310/3330/3335s including
increased compatibility with industry standards such
Remote Automation Solutions
www.EmersonProcess.com/Remote
Features
Product Data Document
420ds9b
July 10, 2007 - Page •
Permit access to onboard FLASH RAM (33XX
has FLASH for boot project only)
•
Optional one or two 10/100 Mbit Ethernet ports
•
ControlWave Upgrade Kits
•
Ethernet port isolation: 500 Vdc
•
One 3 pin Utility Port for Flash downloading
system flashware
CW_10 MFIB with four serial ports
•
System Watchdog relay on CW_10 MFIB
•
CW_30 with two BIP serial ports
•
•
CW_35 with two serial ports
LED status indicators – 6 failure status LEDs,
Watchdog and Idle and communication LEDs
•
CW_31 with one Ethernet port
Memory
•
New Communication card or 3310 MFIB for high
speed ports & IP/PPP serial communication
•
Program execution: 4 MB SD RAM
•
CPU speed increase of up to 1000%
•
Data Memory : 1 MB SRAM battery backed
memory
•
New Protocols – DNP3.0 & CIP
•
File and Historical Archive memory: 16 MB onboard flash
Software Migration
In order to preserve most of your ACCOL program
development time and expense, the ACCOL Translator utility will allow application program conversion
to ControlWave Designer IEC 1131 Structured Text.
For most applications, the ACCOL Translator will
reduce the conversion effort by up to 80% vs. rewriting the program.
To properly take advantage of the ACCOL Translator, one must know ACCOL, ControlWave Designer,
understand the ACCOL application and have access
to the ACCOL source file. Once the application is
translated, it typically requires some degree of editing, depending on the complexity of the program,
and thorough testing prior to deployment on-site.
Emerson Process Management can provide you
with training to do the translation or you can rely on
our Application Support Group to do the translation
for you.
Specifications
CW_10, CW_30, and CW_35 CPU
CW_10 Serial Communication Ports
•
4 Serial communication ports: Located on the
MFIB: 9 pin ‘D’ connectors with standard 33XX
pin out
•
Ports A & C: RS232 – 115.2 K baud
•
Port B: Configurable Modem/RS485 – 115.2
K baud. Supports all existing 3310 private and
switched network modems
•
Port D: RS485 – 115.2 K baud, multi-drop up to
32 nodes
•
ESD protection on RS 485 ports - IEC 801
CW_30 and CW_35 Serial Communication Ports
•
2 Serial communication ports: BIP ports. (On
CW_30 only BIP ports extended from CPU
board and mounted on an external bracket)
•
BIP ports are configurable RS232/RS485
– 115.2 K baud
•
BIP ports are 9 pin ‘D’ connectors with standard
33XX pin out
ESD protection on RS 485 ports - IEC 801
•
32 bit, 150 MHz ARM processor
•
•
Memory battery backup: 7000 hours
•
Optional one or two independent 10/100 BaseT ports with RJ-45 connectors (CW_30 and
CW_35 only)
CW_30 and CW_35 Serial Communication Card
Remote Automation Solutions
www.EmersonProcess.com/Remote
•
2 port and 4 port serial communication cards
available
Product Data Document
420ds9b
July 10, 2007 - Page •
2 port comm card supports existing comm
options (MIB, TIB, RDI, 1200/9600B Modems)
on port B
•
Configurable RS232/RS485 – 115.2 K baud
•
Serial ports are 9 pin ‘D’ connectors with
standard 33XX pin out
•
ESD protection on RS 485 ports - IEC 801
ControlWave Upgrade Kits
Ordering Information
3310 Upgrade Kits
CW_10 Kit - 12 Vdc
includes CPU & MFIB: 396807-01-1-EXCH
CW_10 Kit - 24 Vdc
includes CPU & MFIB: 396807-02-0-EXCH
Keypad/Display Support
The CW_10, CW_30, and CW_35 CPUs support
the local 33XX local and remote Keypad/Display
units via existing display interface connections. The
CW_30 and CW_35 also support the ControlWave
2-button and 25 button Display/Keypad units via
standard Cat-5 cable with RJ-45 connectors.
3330 Upgrade Kits
CW_30 CPU, 2 serial, without Ethernet:
396807-03-8-EXCH
CW_30 CPU, 2 serial, with one Ethernet:
396807-04-6-EXCH
Environmental Specifications
•
Operating Temperature range: -40 to 70oC (-40
to 158oF), storage up to 85oC
•
Relative Humidity: 15-95% non-condensing
•
Vibration: 1.0g for 10-150 Hz - 0.5g for 150Hz to
2000Hz
•
RFI Susceptibility: 3V/m – 80 MHz to 1000Mhz
(EN50082-2)
Power Consumption
CW_30 CPU, 2 serial, with two Ethernet:
396807-05-4-EXCH
CW_30 - 2 Port Enhanced Comm Board:
396807-06-2-EXCH
CW_30 - 4 Port Enhanced Comm Board:
396807-07-0-EXCH
3335 Upgrade Kits
•
CPU without Ethernet: 2 watt
•
CPU with 1 Ethernet: 3 watt
•
CPU with 2 Ethernet: 4 watt
•
MFIB (Watchdog off): 1 watt
CW_35 - 2 Port Enhanced Comm Board
•
MFIB (Watchdog on): 1.9 watt
•
CW_XX 2 port comm.: 0.5 watt
•
CW_XX 4 port comm.: 1 watt
Hazardous Area Approvals
•
FM approved as non-incendive for operation in
Class I, Division 2 hazardous areas
CW_35 CPU, 2 serial, with two Ethernet
www.EmersonProcess.com/Remote
396807-12-7-EXCH
CW_35 - 4 Port Enhanced Comm Board
396807-11-9-EXCH
3331 Upgrade Kit
CW_31 CPU, 2 serial, one Ethernet
Remote Automation Solutions
396807-09-7-EXCH
396807-10-0-EXCH
Product Data Document
420ds9b
July 10, 2007 - Page ControlWave Upgrade Kits
Selection Item Descriptions And Specifications
Communications
2 BIP ports (RS232/ 485 jumper selectable) replacements - full serial async ports - No
sync comm
CW_10
CW_30/35
N/A
Yes
1 or 2 10/100 Ethernet ports
Yes
4 built-in serial asynchronous ports on MFIB - 1 RS232 and 3 selectable RS232/ 485
Yes
4 port communications board - no synchronous ports supported
N/A
Yes
Communications Options
Selectable RS232/ 485 ports
Yes
Yes
Support for RDI
Yes
Yes
Support for TIB
Yes
Yes
Support for 1200 baud modem
Yes
Yes
Support for 9600 baud modem
Yes
Yes
Support for MIB
Yes
Support for fiber modem
Yes
Support for external CDMA and GSM/ GPRS Modems
Yes
Yes
Analog Input - 4, 8 points
Yes
Yes
Analog Output - 2, 4 points
Yes
Yes
Low Level Analog Inputs - 4 points
Yes
Yes
Discrete Inputs - 4, 8, 16 points
Yes
Yes
Discrete Output - 4, 8, 16 points
Yes
Yes
High Speed Counter - 4, 8 points
Yes
Yes
Honeywell XMTR Interface Board
No
No
BBSTI Board - as justified
No
No
Check Before Operate
No
No
High Speed Analog
No
No
I/O Boards Supported
© 2007 Remote Automation Solutions, division of Emerson Process Management. All rights reserved.
Bristol, Inc., Bristol Babcock Ltd, Bristol Canada, BBI SA de CV and the Flow Computer Division , are wholly owned subsidiaries of Emerson Electric Co. doing business as Remote Automation Solutions (“RAS”), a division of Emerson Process Management. FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow and Helicoid are trademarks of RAS. AMS,
PlantWeb and the PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a trademark and service mark of the Emerson Electric Co. All other marks are property of their
respective owners.
The contents of this publication are presented for informational purposes only. While every effort has been made to ensure informational accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. RAS reserves the right to modify or improve the designs or
specifications of such products at any time without notice. All sales are governed by RAS’ terms and conditions which are available upon request. RAS does not assume responsibility for
the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any RAS product remains solely with the purchaser and end-user.
Emerson Process Management
Remote Automation Solutions
Watertown, CT 06795 USA
Mississauga, ON 06795 Canada
Worcester WR3 8YB UK
T 1 (860) 945-2200
T 1 (905) 362-0880
T 44 (1) 905-856950
Website: www.EmersonProcess.com/Remote