Emprex DVDRW-2016SA Network Card User`s manual


Add to my manuals
19 Pages

advertisement

Emprex DVDRW-2016SA Network Card User`s manual | Manualzz

16X DVD Writer

Supports DVD+/-RW, and DVD-RAM writing

(SATA Interface)

User’s Manual

C L AS S 1 L A S E R P R O D U C T

A P P A R E I L A L A S E R D E C L A S S E 1

L A S E R K L A S S E 1

L U O K A N 1 L A S E R L A I T E

P R O D U I T L A S E R

C A T E G O R I E 1

CAUTION

CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

VORSICHT

KLASSE 3B SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN

GEOFFNET. NICHT IN DEN STRAHL SEHEN.

ATTENTION

RADIATION DU FAISCEAU LASER VISIBLES ET INVISIBLES DE CLASSE 3B

EN CAS D'OUVERTURE. EVITER TOUTE EXPOSITION AUX RAYONS.

Copyright Statement

It is a criminal offence, under applicable copyright laws, to make unauthorised copies of copyright-protected material, including computer programs, films, broadcasts and sound recordings. This equipment should not be used for such purposes.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can emit radio frequency energy and, if not installed or used in accordance with the instructions, may cause interference to radio communications. However, television reception interference can be determined by turning the equipment off and on. The user is encouraged to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FOR EUROPE

“The drive is in conformity with the EMC directive and low-voltage directive.”

WEEE LOGO

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Table of Contents

INTRODUCTION 6

S

YSTEM

R

EQUIREMENTS

7

INSTALLATION 8

H

ARDWARE

I

NSTALLATION

D

RIVER

I

NSTALLATION

Windows Environment

S

OFTWARE

P

ACKAGE

Installation Under Windows Environment

8

9

9

9

9

CONNECTION & OPERATION 10

F

RONT

P

ANEL

10

R

EAR

V

IEW

11

DVD REGIONAL CODE 13

R

EGION

P

LAYBACK

C

ONTROL

M

ANAGEMENT

13

R

EGIONAL

C

ODES

13

About This Drive 14

TECHNICAL DATA 15

INTRODUCTION

Welcome to a multimedia world of ReWritable technology with DVD burning capabilities. This multiformat recordable drive presents you more backup choices other than acting as a CD-R/RW drive and as a

DVD-ROM reader. The drive supports DVD Forum’s DVD-R/RW/RAM standard as well as that of DVD+RW Alliance’s DVD+R/RW enabling excellent compatibility, simple, quick recording of both CD/DVD formats, huge capacity storage, and theater-quality playback.

The bundled application software offers the creation fun of video, photos, and music editing in addition to basic data backup. You can record up to

8.5 GB, 4 hours of TV shows or movies with high-quality MPEG2 video/AC-3 sound effect, and even more appealing, author your own

DVD movies – from capture to editing and burning.

Handy, easy to use with rich function, this DVD Writer is an ideal model to enjoy the fascinating digital entertainment on your desktop and here are some more important features:

16X DVD+R, 16X DVD-R, 8X DVD+R Double Layer, and 6X DVD-

R Dual Layer writing, 8X DVD+RW, 6X DVD-RW, and 5X DVD-

RAM rewriting, and 16X DVD-ROM reading

48X CD-R writing, 24X CD-RW rewriting, and 48X CD-ROM reading

Adopts “MTKSuperLink” technology to prevent buffer underrun errors for CD & DVD writing

Supports writing modes of TAO, DAO, SAO and packet writing

Compatible with most existing DVD-ROM drives and DVD video players

Bundled with an extensive application software package

6

System Requirements

For IBM compatible PCs, the system requirements recommended are as follows:

Pentium III, 800MHz or above with at least 256MB of memory

Minimum 2GB free Hard Disk space

SATA host interface supporting ATAPI MMC command

Operating system: Microsoft Windows 98SE/ME/2000/XP

One SATA port

7

INSTALLATION

Hardware Installation

To connect this drive to your PC, you will need one SATA port for the

SATA drive.

1. With the power to your PC disconnected, remove the PC’s top cover.

2. Insert the drive into one of the free 5¼" bays available for disk drives and secure it with screws to your PC.

3. Connect the 7-pin Signal & 15-pin Power Segment Key cable from your hard disk to the back of the DVD Writer drive.

4. If you have a sound card that can be connected to this drive, you can also connect Audio-Out of the drive to Audio-In of the sound card with a 4-pin audio cable.

‹

Please make sure to connect Pin 1 from Audio-Out of the

Writer to Pin 1 from Audio-In of the sound card.

5. Reinstall the casing on your PC, and reconnect the power supply.

8

Driver Installation

Windows Environment

This DVD writer is a Plug & Play device and there is no need to install driver. Windows 98SE/ME/2000/XP can automatically detect the drive and load the appropriate driver.

Software Package

The bundled package combines software for 1) DVD/CD recording 2)

DVDs/VCDs authoring 3) Packet Writing 4) VCD playback, which gives you the complete solution for making audio/data CDs/DVDs of different formats, editing video and authoring DVD movies. The user-friendly interface simplifies the recording process and guides you through the creation in an easy and innovative way. No matter you are a novice or an experienced user; this is your best recording tools with the writer.

Installation Under Windows Environment

1. Insert the application CD and the installation program will run automatically. Then follow the on-screen procedures.

Or

2. Run:\setup.exe on the application CD.

9

CONNECTION & OPERATION

Front Panel

1 2 3 4

Place the disc in the tray here, and then press the Close/Eject button or lightly push the tray to close it.

2. LED Indicator (Green color)

Flashes “green” while verifying, reading or writing discs.

If the Close/Eject button doesn’t work properly and the disc tray can’t be opened, you can insert a paper clip or a small rod into this hole for manual ejection.

Please make sure to power off the system before you do that.

4. Close/Eject button

This button is used to open and close the disc tray. If the tray is closed, pressing the button will eject it.

NOTE: The front panel is subject to change without notice.

10

Rear View

The rear panel from left to right contains the following:

DC Power Connector, 15-pin

By plugging the computer’s power supply cable here, you can connect the drive and your computer system.

Interface Connector, 7-pin

Plug one end of the 7-pin SATA cable here to connect the 7-pin SATA connector on the motherboard.

Figure: SATA Interface Connector

11

Analog line out connector, 4-pin

This connector allows you to connect the drive to your sound card with a 4pin audio cable.

1 2 3 4

Figure: Analog Audio Output Connector

Digital output connector, 2-pin

If your sound card has a digital audio IEC958 format connector, you can connect it to this digital audio output connector with a 2-pin audio cable.

Figure: Digital Output Connector

12

DVD REGIONAL CODE

Region Playback Control Management

All DVD Video Playback systems have “Region Playback Control” (RPC) which is required by Hollywood movie industry and defined by DVD

Forum. You can only play DVD-Video discs with the same regional code as your DVD-Video Playback system.

As for DVD-ROM drives, one kind of the DVD-Video Playback system, there are 2 types:

RPC Phase 1 (as RPC1): RPC1 drives do not have built-in hardware support for region management. DVD-ROM drives of this kind do not play a part in controlling the playback region. It solely depends on the decoder.

RPC Phase 2 (as RPC2): RPC2 drives maintain the regional code change count information in hardware, and in general, the regional code of such drives can be changed up to 5 times by end users under some software decoder. (e.g. PowerDVD)

Regional Codes

Region 1: Canada, U.S.

Region 2: Japan, Europe, South Africa, and Middle East, Egypt

Region 3: Southeast Asia and East Asia

Region 4: Australia, New Zealand, Pacific Islands, Central America,

Mexico, South America, and the Caribbean

Region 5: Eastern Europe, Indian subcontinent, Africa, North Korea, and Mongolia

Region 6: China

13

About This Drive

This DVD Writer is also a RPC2 DVD-ROM drive and the first regional code will depend on the DVD title you play. You are allowed to modify the regional code 5 times (including the initial one). After the fifth alteration, the regional code will be locked and only those DVD titles of the same regional code could be played afterwards, so set the code carefully.

14

TECHNICAL DATA

Interface SATA/ATAPI

Disc Capacity

DVD+/-R, DVD+/-RW:

Single layer 4.7GB

Double layer 8.5GB

DVD-RAM:

4.7GB

CD-R/RW:

74min/650MB, 80min/700MB

Media supported for Writing DVD+R, DVD+R DL, DVD-R, DVD-R DL,

DVD-RAM, DVD+RW, DVD-RW, CD-R,

CD-RW, HS CD-RW, US CD-RW

Applicable Formats DVD+/-R, DVD-RAM, DVD+/-RW, DVD+/-

R DL, DVD-ROM, DVD-Video,

CD-DA, CD-ROM, CD-ROM XA, CD-Extra,

CD-I, Mixed-Mode CD, Video CD, Photo

CD, CD-Text, Bootable CD, CD-R,

CD-RW, Multi-Session

Writing modes Track at Once, Disc at Once, Session at

Once, Multi-Session, VariablePacket

Writing,

Multi-track Reservation

Writing Speed

DVD+R: max. 16X

DVD-RAM: max. 5X

DVD+R DL: max. 8X

DVD-R DL: max. 6X

DVD+RW:

DVD-RW:

CD-R:

max. 8X max. 6X max. 48X

Reading Compatibility CD Audio, CD-Extra, CD-ROM/XA, CD-I,

Photo CD, Video CD, CD-Text, DVD-ROM,

DVD +/-R, DVD +/-RW, DVD-RAM

15

Reading Speed

DVD+/- R:

max. 12X,

DVD-RAM

: max. 5X

DVD+/-RW:

max. 8X

DVD

+/-R DL: max. 8X

CD-R: max. 48X

CD-RW: max. 32X

CD-ROM: max. 48X

DVD-ROM: max. 16X

Data Transfer Rate

CD -- Read

CD-ROM/CD-R: 7200KB/sec (up to 48X)

CD-RW: 4800KB/sec (up to 32X)

CD -- Writ e

CD-R: 7200KB/sec (up to 48X)

CD-RW: 3600KB/sec (up to 24X)

DVD -- Read

DVD-ROM: 21632KB/sec (up to 16X)

Access time

Data buffer

Disc loading

DVD -- Writ e

DVD+R: 21632KB/sec (up to 16X)

DVD-R: 21632KB/sec (up to 16X)

DVD-RAM: 6760KB/sec (up to 5X)

DVD+R DL: 10816KB/sec (up to 8X)

DVD-R DL: 8112KB/sec (up to 6X)

DVD+RW: 10816KB/sec (up to 8X)

DVD-RW: 8112KB/sec (up to 6X)

DVD:

CD:

160ms (16X)

130ms (48X)

2MB

(motorized)

Dimensions (WxHxD) 148.6 x 41.8 x 177 mm

16

Mounting Method

Temperature

Operating

Non-operating

Humidity

Operating

Non-operating

Horizontal

5°C to 45°C

-20°C to 60°C

8% ~ 80%RH

5% ~ 95%RH

17

18

3100553670

Version 1.0

Nov. 2006

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement