Epson 1170 II Printer User Manual

BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 1
Blu-ray Disc Player
XV-BP10
XV-BP11
For customer use:
INSTRUCTIONS
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT2101-001A
[J]
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION:
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from over heating.
The openings shall never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product
shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instruction have been adhered to.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover or cabinet. There
are no user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: CLASS 3B VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
CAUTION
CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO THE BEAM.
ADVARSEL KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSAETTELSE FOR STRÅLING.
ADVARSEL KLASSE 3B SYNLIG OG USYNLIG LASERTSRÅLING NÅR DEKSEL ÅPENS.
UNNGÅ EKSPONERING FOR STRÅLEN.
VARNING
KLASS 3B SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR
ÖPPNAD. STRÅLEN ÄR FARLIG.
VARO
AVATTAESSA OLET ALTTIINA LUOKAN 3B NÄKYVÄÄ JA NÄKYMÄTÖNTÄ
LASERSÄTEILYLLE VARO ALTISTUMISTA SÄTEELLE.
VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG KLASSE 3B, WENN
ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
CAUTION: The apparatus shall not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
2
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.
Check the specification page of this owner’s manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the
cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains
cord plug. When installing the product, ensure that the plug
is easily accessible.
FCC WARNING: This equipment may generate or use
radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is
made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the product is operated in a residential installation. This
product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this product does cause harmful interference to radio or
television reception, which can be determined by turning
the product off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
As an ENERGY STAR® Partner, JVC has
determined that this product or product
models meet the ENERGY STAR® guidelines for energy efficiency.
• When power off mode, power consumption is under
0.01W.
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 3
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Introduction
IMPORTANT SAFETY INSTRUCTIONS
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus.
When a cart is used, use caution when moving the cart/product combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the product has been exposed to rain or moisture, does not operate normally, or has been
dropped.
3
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 4
Notes on Copyrights
Because AACS (Advanced Access Content
System) is approved as content protection system for BD format, similar to use of CSS (Content
Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase
as those restrictions may be adopted and/or
changed by AACS after the production of this
product.
Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for
BD format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark
and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,
or this product, please contact an authorized
Customer Service Center.
Many BD-ROM/DVD discs are encoded with copy
protection. Because of this, you should only connect your player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected discs.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs,
CDs and other materials may subject you to civil
and/or criminal liability.
Licenses
Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and
DTS-HD Master Audio | Essential are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights
Reserved.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
“x.v.Color” is a trademark of Sony Corporation.
“Blu-ray Disc” is a trademark.
“BONUSVIEW” is trademark of Blu-ray Disc
Association.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the
personal and non-commercial use of a consumer to
(i) encode video in compliance with the AVC
Standard and VC-1 Standard (“AVC/VC-1 Video”)
and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and noncommercial activity and/or was obtained from a
video provider licensed to provide AVC/VC-1 Video.
No license is granted or shall be implied for any
other use. Additional information may be obtained
from MPEG LA, LLC. See http://www.mpegla.com.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Electric Industrial Co. Ltd and Sony
Corporation.
4
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 5
Contents
About the
Operations . . . . . . . . . . . . . . . . . .21-28
Symbol Display . . . . . . . . . . . . .6
General playback features . . . . . . . . . . .21-23
Symbols Used in this Manual . . . . . . . . . . . . .6
If a disc menu screen is displayed . . . . . . . .24
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . .6
Enlarge the playback image . . . . . . . . . . . . .24
Moisture Condensation . . . . . . . . . . . . . . . . .6
Time Search . . . . . . . . . . . . . . . . . . . . . . . .24
Handling the Unit . . . . . . . . . . . . . . . . . . . . . .6
Skip Search . . . . . . . . . . . . . . . . . . . . . . . . .24
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . .7
Marker Search . . . . . . . . . . . . . . . . . . . . . . .24
Regional Code . . . . . . . . . . . . . . . . . . . . . . .7
Watching from a different angle
BD-ROM Disc Features . . . . . . . . . . . . . . . . .8
Last Scene Memory . . . . . . . . . . . . . . . . . . .24
Compatibility Notes . . . . . . . . . . . . . . . . . . . .9
Using Color (R, G, B, Y) Buttons
Certain System Requirements . . . . . . . . . . . .9
Screen Saver . . . . . . . . . . . . . . . . . . . . . . .25
Language setting . . . . . . . . . . . . . . . . . . . . . .9
Changing content list view . . . . . . . . . . . . . .25
Resetting the Player . . . . . . . . . . . . . . . . . . .9
Displaying Disc Information On-Screen . . . .25
Using a USB Flash Drive . . . . . . . . . . . . . . .10
Playing a DVD VR Format Disc . . . . . . . . . .26
Using the Home Menu . . . . . . . . . . . . . . . . .10
Playing an Audio CD or MP3/WMA files . . . .27
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . .11
Viewing a Photo file . . . . . . . . . . . . . . . . . . .28
Introduction
Introduction . . . . . . . . . . . . . . . . . .6-12
. . . . . . . . .24
. . . . . . . .25
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . .11
Remote Control . . . . . . . . . . . . . . . . . . . . . .12
Reference . . . . . . . . . . . . . . . . . . .29-33
Remote Control Operation . . . . . . . . . . . . . .12
Language Codes . . . . . . . . . . . . . . . . . . . . .29
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . .29
Installation and Setup . . . . . . . . .13-20
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .30
HDMI connection . . . . . . . . . . . . . . . . . . . .13
Specifications . . . . . . . . . . . . . . . . . . . . . . .31
Connections to Your TV . . . . . . . . . . . . . . . .14
This unit’s Audio Output Specifications . . . . .32
Connecting to an Amplifier . . . . . . . . . . . . . .15
Open source software notice . . . . . . . . . . . .33
Resolution Setting . . . . . . . . . . . . . . . . . . . .16
Initial Settings . . . . . . . . . . . . . . . . . . . . . . .17
- General Operation . . . . . . . . . . . . . . . .17
- [DISPLAY] Menu . . . . . . . . . . . . . . . . .17
- [LANGUAGE] Menu
- [AUDIO] Menu
. . . . . . . . . . . . . .18
. . . . . . . . . . . . . . . . . .18
- [LOCK] Menu (Parental Control) . . . . . .19
- [OTHERS] Menu . . . . . . . . . . . . . . . . .20
5
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 6
Introduction
To ensure proper use of this product, please read
this owner’s manual carefully and retain for future
reference.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
This manual provides information on the operation
and maintenance of your player. Should the unit
require service, contact an authorized service location.
About the
Symbol Display
“
“ may appear on your TV display during operation and indicates that the function explained in this
owner’s manual is not available on that specific
media.
Symbols Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols are applicable only to the disc represented by
the symbol.
ALL All discs listed below
BD BD-ROM disc
DVD DVD-Video, DVD-R/RW, +R/+RW in Video
mode or VR mode and finalized
AVCHD DVD-R/RW, +R/+RW in AVCHD format
ACD Audio CDs
MP3 MP3 files
WMA WMA files
PHOTO Photo files
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or
anti-static spray intended for older vinyl records.
Moisture Condensation
Never operate this product immediately after moving
it from a cold location to a warm location. Leave it
for two or three hours without operating it. If you use
this product in such a situation, it may damage discs
and internal parts.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide
spray near the unit.
•
Wiping with strong pressure may damage the
surface.
•
Do not leave rubber or plastic products in contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
6
8/31/09
12:16 PM
Page 7
Playable Discs
Blu-ray Disc
- Discs such as movies that can be purchased or rented
- BD-R/RE discs that contain BDMV,
audio titles, MP3, WMA, or Photo files.
DVD-VIDEO
Discs such as movies that can be purchased or rented
• Some AVCHD format discs may not play, depending on the recording condition.
• AVCHD format discs need to be finalized.
• “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or “ALL”.
DVD-R
- Video mode and finalized only
- Supports the dual layer disc also
- AVCHD format
- DVD-R discs that contain audio titles,
MP3, WMA, or Photo files.
Notes:
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-R/RW,
+R/+RW) disc itself, some CD-R/RW
(or DVD-R/RW, +R/+RW) discs cannot be played
on the unit.
DVD-RW
- VR mode, Video mode and finalized
only
- AVCHD format
- DVD-RW discs that contain audio titles,
MP3, WMA, or Photo files.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). Doing so may result in
malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or
DVD-R/RW, +R/+RW) may not be playable.
DVD-R/RW, +R/+RW and CD-R/RW discs recorded using a personal computer or a DVD or CD
Recorder may not play if the disc is damaged or
dirty, or if there is dirt or condensation on the
player’s lens.
If you record a disc using a personal computer,
even if it is recorded in a compatible format, there
are cases in which it may not play because of the
settings of the application software used to create
the disc. (Check with the software publisher for
more detailed information.)
This player requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files)
and these require certain pre-existing conditions
to ensure compatible playback.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always be sought from the copyright owner.
This player supports 8 cm disc except Blu-ray
Disc.
+R
- Finalized disc only
- Supports the dual layer disc also
- AVCHD format
- DVD+R discs that contain audio titles,
MP3, WMA, or Photo files.
+RW
- Video mode and finalized only
- AVCHD format
- DVD+RW discs that contain audio titles,
MP3, WMA, or Photo files.
Audio CD
Audio CDs or CD-Rs/CD-RWs in audio
CD format that can be purchased
CD-R/CD-RW
CD-R/CD-RW discs that contain audio
titles, MP3, WMA, or Photo files.
AVCHD (Advanced Video Codec High Definition)
• This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
• The AVCHD format is a high definition digital video
camera format.
• The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than that
of the conventional image compressing format.
• Some AVCHD discs use the “x.v.Color” format.
• This player can playback AVCHD discs using
“x.v.Color” format.
Introduction
BD320-JN_BUSAJJK_OM_ENG
7
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 8
BD-ROM Disc Features
BD-ROM Discs can store 25 GB (single layer) or
50 GB (dual layer) on a single sided disc - about
5 to 10 times the capacity of a DVD.
BD-ROM Discs also support the highest quality HD
video available in the industry (up to 1920 x 1080) Large capacity means no compromise on video
quality. Furthermore, a BD-ROM disc has the same
familiar size and look as DVD.
• The following BD-ROM disc features are disc
dependent and will vary.
• Appearance and navigation of features will also
vary from disc to disc.
• Not all discs will have the features described
below.
• BD-ROM, Hybrid disc have both BD-ROM and
DVD (or CD) layers on one side. On such discs,
BD-ROM layer will be only played back in this
player.
Video highlights
The BD-ROM format for movie distribution supports
three highly advanced video codecs, including
MPEG-2, MPEG4 AVC (H.264), and SMPTE VC1.
HD video resolutions are also available:
• 1920 x 1080 HD
• 1280 x 720 HD
For High-Definition Playback
To view high-definition contents from BD-ROM discs,
an HDTV is required. Some discs may require HDMI
OUT for viewing of high-definition contents. Ability to
view high-definition contents in BD-ROM discs may
be limited depending on the resolution of your TV.
Graphic planes
Two individual, full HD resolution (1920x1080)
graphic planes (layers) are available, on top of the
HD video layer. One plane is assigned to videorelated, frame accurate graphics (like subtitles), and
the other plane is assigned to interactive graphic
elements, such as buttons or menus.
For both planes, various wipes, fades and scroll
effects may be available.
Graphic
Plane
HD Video
8
Menu sounds
When you highlight or select a menu option, sounds
can be heard such as button clicks or a voice-over
explaining the highlighted menu choice.
Multi-page/PopUp Menus
With DVD-Video, playback is interrupted each time a
new menu screen is accessed. Due to BD-ROM
disc’s ability to preload data from the disc without
interrupting playback, a menu can consist of several
pages.
You can browse through the menu pages or select
different menu paths, while the audio and video
remain playing in the background.
Interactivity
Certain BD-ROM Discs may contain animated
menus and/or trivia games.
User Browsable Slideshows
With BD-ROM Discs, you can browse through various still pictures while the audio remains playing.
Subtitles
Depending on what is contained on the BD-ROM
disc, you may be able to select different font styles,
sizes and colors for some subtitles. Subtitles may
also be animated, scrolled or faded in and out.
BD-J Interactive Capability
The BD-ROM format supports Java for interactive
functions. “BD-J” offers content providers almost
unlimited functionality when creating interactive
BD-ROM titles.
BD-ROM Disc Compatibility
This player supports only BD-ROM Profile 1.1.
• Discs supporting BONUSVIEW (BD-ROM version
1.1 Profile 1 version 1.1/Final Standard Profile)
that allows Virtual packages or Picture-in-Picture
functions to be used.
8/31/09
12:16 PM
Page 9
Compatibility Notes
Because BD-ROM are a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility problems, please contact an authorized Customer
Service Center.
Viewing high-definition content and up-converting
standard DVD content may require an HDMIcapable input or HDCP-capable DVI input on
your display device.
Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
Dolby TrueHD, Dolby Digital Plus and DTS-HD
are supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
You can use a USB Flash Drive that is used to
store some disc related information, including
downloaded on-line content. The disc you are
using will control how long this information is
retained.
Certain System Requirements
For high definition video playback:
High definition display that has HDMI input jack.
BD-ROM disc with high definition content.
HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For up-conversion of standard definition DVD, an
HDMI or HDCP capable DVI input on your display
device is required for copy protected content.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
An amplifier/receiver with a built-in (Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
Main, center, surround speakers and subwoofer
as necessary for chosen format.
Language setting
When turned on for the first time, select a language
for the [Setup] menu and on-screen display.
Introduction
BD320-JN_BUSAJJK_OM_ENG
1. Press HOME and the [Home Menu] appears.
2. Select [Setup] and press ENTER. The Setup
menu appears.
3. Use v / V to select [LANGUAGE] option then
press B.
4. Use v / V to select [Display Menu] option then
press B.
5. Use v / V to select the desired language then
press ENTER.
6. Press RETURN or HOME to exit the Setup
menu.
Resetting the Player
If you observe any of the following symptoms...
When the Player is plugged in, but the power will
not turn on or off.
When the display window is not working.
When the Player does not operate normally.
You can reset the Player as follows:
Press and hold the STANDBY/ON button for more
than five seconds. This will force the Player to
power off. Press the STANDBY/ON button again
to turn the Player back on.
Unplug the power cord and then plug the power
cord again after more than five seconds.
9
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 10
Using a USB Flash Drive
Using the Home Menu
This unit can play the music and photo files contained on the USB Flash Drive.
From the Home Menu screen you can access all the
Media for playback and setting of the unit.
Insert/Remove a USB Flash Drive
1. Press HOME and the [Home Menu] appears.
USB Flash Drive
Inserting a USB Flash Drive
Insert straight-in until it fits into place.
Removing a USB Flash Drive
Withdraw the USB Flash Drive carefully.
Notes:
This unit supports only USB Flash Drive with
FAT16 or FAT32 format.
Do not extract the USB Flash Drive during operation (play, etc.).
A USB Flash Drive which requires additional program installation when you have connected it to a
computer is not supported.
USB Flash Drive: USB Flash Drive that support
USB1.1 and USB2.0.
Music files (MP3/WMA) and photo files
(JPEG/PNG) can be played. For details of operations on each file, refer to relevant pages.
Regular back up is recommended to prevent data
loss.
If you use a Card Reader, USB extension cable
or USB HUB, the USB Flash Drive may not be
recognized.
Some USB Flash Drives may not work with this
unit.
Digital camera and mobile phone are not supported.
USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
When take off an active device connecting to USB
port, please take it off after switching off the unit.
When connecting with a USB cable, use the USB
2.0 cable those length is less than 1 m.
Using the USB Flash Drive
1. Connect a USB Flash Drive.
2. Press HOME on the Remote Control.
3. Select [Music] or [Photo] option then press
ENTER.
4. Select [USB] then press ENTER.
[MUSIC] or [PHOTO] menu appears.
Details for the menu are on pages 27-28.
10
2. Use b / B to select the desired option then
press ENTER.
[Movie] – Start video media’s playback or displays the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu. (page 28)
[Music] – Displays [MUSIC] menu. (page 27)
[Setup] – Displays [Setup] menu. (page 17)
Note:
When a disc and USB Flash Drive have the contents, it can choose those menus.
About Setup menu:
Menus
Buttons
Operations
Moves the cursor.
Activates the selected item.
Closes the menu.
Tip:
If you select the [Photo] or [Music] option when a
USB Flash Drive is connected and a disc is inserted
simultaneously, the menu for selecting a media will
appear. Select a media then press ENTER.
For example:
Note:
The unit will be in stop mode then the [Home Menu]
will appear if you press HOME during playback.
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 11
a
b
c
d
e
f
g
h
i
a 1/' (STANDBY/ON) Button
Switches the unit ON or OFF.
f USB Port
Connect a USB Flash Drive.
b Disc Tray
Insert a disc here.
g N / X (PLAY / PAUSE)
Starts playback.
Pause playback temporarily, press again to exit
pause mode.
c Z (OPEN/CLOSE)
Opens or closes the disc tray.
Introduction
Front Panel
h x (STOP)
Stops playback.
d Display Window
Shows the current status of the player.
i . / > (SKIP)
Go to next or previous file/track/chapter.
e Remote Sensor
Point the Remote Control here.
Rear Panel
a
b
c d
e
a AC Power Cord
Plug into the power source.
d DIGITAL AUDIO OUT (COAXIAL)
Connect to digital (coaxial) audio equipment.
b HDMI OUT (Type A)
Connect to TV with HDMI inputs. (Interface for
digital audio and video)
e 2CH AUDIO OUT (Left/Right)
Connect to a TV with 2 channel audio inputs.
c VIDEO OUT
Connect to a TV with video inputs.
11
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Remote Control
Page 12
OPEN/CLOSE (Z): Opens and
closes the disc tray.
0-9 numerical buttons: Select
numbered options in a menu.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
a
b
JVC TV Control Buttons:
• TV STANDBY/ON (1/'): Turn
the TV on or off.
• INPUT: Switch the TV’s input
source between the TV and
other input sources.
• CH (+/-): Scan up or down
through memorized channels.
• VOL (+/-): Adjust the volume of
the TV.
• MUTING: Temporarily turns TV
sound OFF, press again to
restore.
c
b
m / M (SCAN): Search
backward or forward.
X (PAUSE/STEP): Pauses
playback.
a
STANDBY/ON (1/'): Switches
the player ON or OFF.
RESOLUTION: Sets the output
resolution for HDMI OUT jack.
: This button is not available.
SUBTITLE: Selects a
subtitle language.
SUBTITLE ON/OFF: Switches
the subtitle on or off.
TITLE/POP-UP: Displays the
DVD title menu or BD-ROM’s
popup menu, if available.
d Color (R, G, B, Y) buttons: Use
to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO] and [MUSIC] menu.
SEARCH: Displays or exits the
search menu.
ZOOM: Displays or exits the
[Zoom] menu.
x (STOP): Stops playback.
DISC MENU: Accesses menu on
a disc.
Direction buttons: Select an
option in the menu.
ENTER ( ): Acknowledges
menu selection.
Remote Control Operation
Point the Remote Control at the remote sensor and
press the buttons.
Caution
• Do not put the batteries in the place where young
children can reach.
12
AUDIO: Selects an audio language or audio channel.
REPEAT: Repeat a desired section.
N (PLAY): Starts playback.
c HOME: Displays or exits the
[Home Menu].
DISPLAY: Displays or exits OnScreen Display.
MARKER: Marks any point during playback.
. / > (SKIP): Go to next or
previous chapter / track / file.
d
RETURN (O): Exits or closes
the menu, or resumes playback.
The resume play function may
work depending on the BD-ROM
disc.
Remote Control Battery Installation
Remove the battery cover on
the rear of the Remote Control,
and insert a R03 (size AAA)
battery with
and
matched
correctly.
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 13
Installation and Setup
HDMI connection
HDMI compatible TV
HDMI
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable.
1. Connect the HDMI jack on the player to the HDMI
jack on a HDMI compatible TV or monitor (H).
2. Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
Notes:
You must select a HDMI audio output and a
maximum sampling frequency that your TV
accepts using [HDMI] and [Sampling Freq.]
options on the setup menu (see page 18).
If a connected HDMI device does not accept the
audio output of the unit, the HDMI device’s audio
sound may be distorted or may not output.
Tips:
• When you use HDMI connection, you can change
the resolution for the HDMI output. (Refer to
“Resolution Setting” on page 16.)
Rear of the player
Additional Information for HDMI
When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly with
non-HDCP device.
- This player does not playback and TV screen is
changed to black screen.
• Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on the
[Setup] menu (see page 17).
Cautions
Changing the resolution when the connection has
already been established may result in malfunctions. To solve the problem, turn off the player and
then turn it on again.
When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this
case, check the the HDMI connection, or disconnect the HDMI cable.
If there is noise or lines on the screen, please
check the HDMI cable (length is generally limited
to 15ft).
Installation and
Setup
H
13
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 14
Connections to Your TV
Tip:
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the player’s AUDIO OUT jack to
the phono in jack (record player) of your audio
system.
– Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Rear of TV
VIDEO
INPUT
AUDIO INPUT
L
A
R
V
Video Connection
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable (V).
Audio (Left/Right) Connection
Connect the left and right AUDIO OUT jacks of the
player to the audio left and right IN jacks on the TV
using the audio cables (A).
14
Rear of the
player
8/31/09
12:16 PM
Page 15
Connecting to an Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
Note:
Since many factors affect the type of audio output,
see “The unit’s Audio Output Specifications” on page
32 for details.
Connecting to an Amplifier via 2 Channel
Audio Output
Connect the Left and Right 2CH AUDIO OUT jacks
on the player to the audio left and right in jacks on
your amplifier, receiver, or stereo system, using
audio cables (A).
Connecting to an Amplifier via Digital Audio
Output (Coaxial)
1. Connect the player’s DIGITAL AUDIO OUT jack
to the corresponding in jack (COAXIAL X) on
your amplifier. Use an optional digital (coaxial X)
audio cable.
Notes:
You must select a digital audio output and a maximum sampling frequency that your Amplifier (or
AV receiver) accepts using [SPDIF], [HDMI] and
[Sampling Freq.] options on the [Setup] menu
(see page 18).
With digital audio connection (SPDIF or HDMI),
Disc Menu button sounds of BD-ROM may not be
heard if the [SPDIF] or [HDMI] option is set to
[Primary Pass-Thru].
If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
To see the audio format of the current disc in the
on-screen display, press AUDIO.
Installation and
Setup
BD320-JN_BUSAJJK_OM_ENG
Rear of the player
2. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 18.)
Connecting to an Amplifier via HDMI Output
1. Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier. Use an
HDMI cable (H1).
2. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 18.)
H1
Tip:
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using an HDMI cable (H2) if
your amplifier has HDMI output jack.
A
X
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video Receiver that supports one or more of
the audio formats supported by your player. Check
the receiver manual and the logos on the front of the
receiver. (PCM Stereo, PCM Multi-Ch, Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS and/or
DTS-HD)
HDMI OUTPUT
L
HDMI INPUT
R
AUDIO INPUT
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
H2
HDMI
HDMI compatible TV
15
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 16
Resolution Setting
5. Use v / V to select the desired resolution then
press ENTER to confirm your selection.
The player provides several output resolutions for
HDMI OUT jack.
You can change the resolution using [Setup] menu
or pressing the RESOLUTION button in stop mode.
Available resolution according to
connection and media format
Note:
Since several factors affect the resolution of video
output, see “Available resolution according to the
resolution setting” on this page.
Auto – If the HDMI OUT jack is connected for
TVs providing display information (EDID), automatically selects the resolution best suited to the
connected TV.
1080p – Outputs 1080 lines of progressive
video.
1080i – Outputs 1080 lines of interlaced video.
720p – Outputs 720 lines of progressive video.
480p – Outputs 480 lines progressive video.
480i – Outputs 480 lines of interlaced video.
How to check the current resolution
using RESOLUTION button
Press RESOLUTION button in stop mode. The
current resolution appears in the display window
(1080p, etc.) You can change the resolution also by
pressing RESOLUTION button repeatedly.
RESOLUTION button
How to change the resolution using
Setup menu
1. Press HOME and the Home Menu appears.
2. Select [Setup] and press ENTER. The Setup
menu appears.
3. Use v / V to select [DISPLAY] option then press
B to move to the second level.
4. Use v / V to select the [Resolution] option then
press B to move to the third level.
16
HDMI OUT connection
• For the 480i resolution setting, real output resolution of HDMI OUT will change to 480p.
• If you select a resolution manually and then connect the HDMI jack to TV and your TV does not
accept it, the resolution setting is set to [Auto].
• If you select a resolution that your TV does not
accept, the warning message will appear. After
resolution change, if you cannot see the screen,
please wait 20 seconds and the resolution will
automatically revert back to the previous resolution.
• If the [1080p Display Mode] option is set to
[24 Hz], the 1080p video output frame rate may be
automatically set to either 24Hz or 60Hz depending both on the capability and preference of the
connected TV and based on the native video
frame rate of the content on the BD-ROM disc.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 480i resolution.
Note:
Depending on your display, some of the resolution
settings may result in the picture disappearing or an
abnormal picture appearing. In this case, press
HOME key then RESOLUTION repeatedly until the
picture re-appear.
Available resolution according to the
resolution setting
Resolution Setting
HDMI OUT
480i
480p
480p
480p
720p
720p
1080i
1080i
1080p / 24Hz
1080p / 24Hz
1080p / 60Hz
1080p / 60Hz
8/31/09
12:16 PM
Page 17
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on
each Setup menu item, see pages 17 to 20.
TV Aspect Ratio
[4:3 Letter Box] – Select when a standard 4:3
TV is connected. Displays theatrical images with
masking bars above and below the picture.
[4:3 Pan Scan] – Select when a standard 4:3 TV
is connected. Displays pictures cropped to fill your
TV screen. Both sides of the picture are cut off.
To display and exit the Menu:
Press HOME and the Home Menu appears. Select
[Setup] then press ENTER, and Setup menu
appears.
Press RETURN or HOME to exit the Setup menu.
[16:9 Original] – Select when a 16:9 wide TV is
connected. The 4:3 picture is displayed with an
original 4:3 aspect ratio, with black bars appearing at the left and right sides.
To go to the next level:
Press B on the Remote Control.
[16:9 Full] – Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally
(in a linear proportion) to fill the entire screen.
To go back to the previous level:
Press b on the Remote Control.
Resolution
General Operation
Sets the output resolution of HDMI video signal.
Refer to “Resolution Setting” on page 16 for details
about the resolution.
1. Press HOME and the Home Menu appears.
2. Select [Setup] and press ENTER. The Setup
menu appears.
Installation and
Setup
BD320-JN_BUSAJJK_OM_ENG
1080p Display Mode
When the resolution is set to 1080p, select [24Hz]
for smooth presentation of film material
(1080p/24Hz) with an HDMI-equipped display
compatible with 1080p/24Hz input.
3. Use v / V to select the desired option then press
B to move to the second level. The screen
shows the current setting for the selected item,
as well as alternate setting(s).
Notes:
• When you select [24Hz], you may experience
some picture disturbance when the video switches
video and film material. In this case, select [60Hz].
• Even when [1080p Display Mode] is set to [24Hz],
if your TV is not compatible with 1080p/24Hz, the
actual frame frequency of the video output will be
60 Hz.
• If you want to set the 1080p/24Hz, set the resolution setting to [1080p] and [1080p Display Mode]
option to [24Hz].
4. Use v / V to select the second desired option
then press B to move to the third level.
HDMI Color Setting
5. Use v / V to select the desired setting then
press ENTER to confirm your selection. Some
items require additional steps.
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
6. Press RETURN or HOME to exit the Setup
menu.
[YCbCr] – Select when connecting to an HDMI
display device.
[DISPLAY] Menu
[RGB] – Select when connecting to an DVI display device.
17
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 18
[LANGUAGE] Menu
[PCM Stereo] – Select if you connect this unit’s
HDMI OUT or DIGITAL AUDIO OUT jack to a
device with two-channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only) – Select if you
connect this unit’s HDMI OUT jack to a device
with multi-channel digital decoder.
[DTS Re-Encode] – Select if you connect this
unit’s HDMI OUT or DIGITAL AUDIO OUT jack to
a device with DTS decoder.
Display Menu
Select a language for the [Setup] menu and onscreen display.
Disc Menu / Disc Audio / Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original] – Refers to the original language in
which the disc was recorded.
[Other] – Press ENTER to select another language. Use number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list on page 29.
[Off] (for Disc Subtitle) – Turn off Subtitle.
Note:
Depending upon the disc, your language setting
may not work for some discs.
[AUDIO] Menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
Note:
Since many factors affect the type of audio output,
see “The unit’s Audio Output Specifications” on page
32 for details.
[Primary Pass-Thru] – Select if you connect this
unit’s DIGITAL AUDIO OUT and HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
Notes:
• When [HDMI] option is set to [PCM Multi-CH], the
audio may output as PCM Stereo if the PCM
Multi-Ch information is not detected from HDMI
device with EDID.
• If the [HDMI] or [SPDIF] option is set to
[DTS Re-Encode], the DTS Re-encode audio is
outputted for BD-ROM discs with secondary audio
and the original audio is outputted for the other
discs (like [Primary Pass-Thru]).
Sampling Freq. (Only for SPDIF audio)
[192KHz] – Select this if your A/V Receiver or
Amplifier is capable of handling 192 KHz signals.
[96KHz] – Select this if your A/V Receiver or
Amplifier is NOT capable of handling 192 KHz
signals. When this choice is made, this unit automatically converts any 192 KHz signals to
96 KHz so your system can decode them.
[48KHz] – Select this if your A/V Receiver or
Amplifier is NOT capable of handling 192 KHz
and 96 KHz signal. When this choice is made,
this unit automatically converts any 192 KHz and
96 KHz signals to 48 KHz so your system can
decode them.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
HDMI / SPDIF (Digital Audio Output)
Select the output sound format when a device
equipped with an HDMI or Digital Audio input jack is
connected to the HDMI OUT or DIGITAL AUDIO
OUT jack on this player.
When a disc encoded in Dolby Digital or Dolby
Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a
lower volume without losing clarity of sound. Set
DRC to [On] for this effect.
Note:
The DRC setting can be changed only when a disc
is not inserted or the unit is in complete stop mode.
18
8/31/09
12:16 PM
Page 19
[LOCK] Menu (Parental Control)
DVD Rating DVD
Use the v / V / b / B buttons to select [LOCK] settings in the [Setup] menu.
The [LOCK] settings affect only BD and DVD playback. Set the password and have to input it to validate the [LOCK] settings.
Blocks playback of rated disc based on their content. (Not all discs are rated.)
1. Select [DVD Rating] on the [LOCK] menu then
press B.
2. To access this option, you must input the password you have created. If you have not yet
entered password, you will be prompted to do so.
Input a password and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR or
b to delete a number one by one.
3. Select a rating from 1 to 8 using the v / V buttons.
Password
You can create, change or delete the password.
1. Select [Password] option on the [LOCK] menu
then press B.
2. Use number buttons on the remote control to
input the 4-digit password.
To create new password, press ENTER when the
[New] option is highlighted. Input new password
and press ENTER. Enter it again and press
ENTER to verify.
To change the password, press ENTER when the
[Change] option is highlighted, then input old
password and press ENTER. Input new password
and press ENTER. Enter it again and press
ENTER to verify.
To delete the password, select [Delete] option
then press ENTER, then input password and
press ENTER. The password is deleted.
Tip:
If you make a mistake before pressing ENTER,
press CLEAR or b to delete a number one by one.
[Rating 1-8] – Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
[Unlock] – If you select unlock, parental control
is not active and the disc plays in full.
Installation and
Setup
BD320-JN_BUSAJJK_OM_ENG
4. Press ENTER to confirm your rating selection.
BD Rating
BD
Set an age limit for BD-ROM viewing.
1. Select [BD Rating] on the [LOCK] menu then
press B.
2. Follow step 2 as shown above (DVD Rating).
3. Use number buttons to input an age limit for
BD-ROM viewing.
[255 Year(s)] – All BD-ROM can be played.
[0-254 Year(s)] – Prohibits play of BD-ROM with
corresponding ratings recorded on them.
4. Press ENTER to confirm your selection.
If you forget your password
Area Code
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 29.
2. Select [LOCK] t [Password] option in the
[Setup] menu.
1. Select [Area Code] on the [LOCK] menu then
press B.
3. Use Number buttons to enter the 6-digit number
“210499”.
The password is cleared.
2. Follow step 2 as shown above (DVD Rating).
3. Select an area code using v / V buttons then
press ENTER to confirm your selection.
19
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 20
[OTHERS] Menu
Skin
Changes the background of the initial screen.
Initialize
You can reset the player to its original factory settings or initialize the BD storage.
1. Select [Initialize] option then press B.
2. Press v / V to select the desired option then
press ENTER.
The confirm message will appear.
[Factory Set] – If you need to, you can reset the
player to all its factory settings. Some options
cannot be reset. (Rating, Password and Area
Code, etc.)
[BD Storage Clear] – Deletes the BD contents
from the connected USB Flash Drive. The files
(such as music or photo file) stored in the USB
Flash Drive except BD contents are not erased.
3. Use b / B to select [Yes] or [No] then press
ENTER.
20
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 21
Operations
General playback features
1. Load your chosen disc in the tray, with the playback side down.
2. Start playback using the HOME menu (see page 10).
Buttons
Operations
OPEN / CLOSE (Z)
Opens or closes the disc tray.
ALL
N (PLAY)
Starts the playback.
ALL
ENTER
Acknowledges the selection on the menu screen (Disc
menu, Title menu, POP-UP menu, etc.).
BD
x (STOP)
Stops the playback.
ALL
The unit records the stopped point, depending on the
disc. “Xx” appears on the screen briefly. Press
N (PLAY) to resume playback (from the scene point).
If you press x (STOP) on the remote control again or
unload the disc (“x” appears on the screen.), the unit
will clear the stopped point. (Xx = Resume Stop, x =
Complete Stop)
Notes:
• The resume point may be cleared when a button is
pressed (for example; STANDBY/ON, OPEN/CLOSE,
etc).
• On BD-Video discs including BD-J, the resume play
function does not work.
• On BD-Video, DVD and AVCHD discs, if you press
x (STOP) on the front panel in Resume Stop mode
and [Movie] is highlighted on the [Home] menu, the
unit will resume playback (from the scene point).
• On BD-ROM interactive title, the unit will be in
Complete Stop mode if you press x (STOP) once during playback.
BD
MP3
During playback, press X (PAUSE) to pause playback.
Tip: During Audio CD or MP3/WMA playback, press
X (PAUSE) once again to resume playback.
ALL
Press X (PAUSE) repeatedly to play Frame-by-Frame.
DVD
. / > (SKIP)
During playback, press . or > to go to the next
chapter/track/file or to return to the beginning of the current chapter/track/file.
Press . twice briefly to step back to the previous
chapter/track/file.
ALL
m / M (SCAN)
During playback, press SCAN (m or M) repeatedly
to select the required scan speed.
- DVD, BD, AVCHD: 5 steps,
- Audio CD, MP3, WMA: 3 steps
ALL
While the playback is paused, press SCAN M repeatedly to play in slow motion (4 steps, forward only).
DVD
X (PAUSE)
Discs
DVD
Operation
DVD ACD
WMA AVCHD
BD
AVCHD
BD
AVCHD
Continued t
21
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 22
General playback features (Continued)
Buttons
Operations
TITLE/POP-UP
If the current DVD or BD-ROM disc has a menu, the Title DVD
menu or Popup menu appears on the screen. Depending
on the disc, the menu may not be available.
BD
AVCHD
DISC MENU
The menu appears on the screen. Depending on the
disc, the menu may not be available.
DVD
BD
AVCHD
REPEAT
Playing repeatedly:
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD, BD, AVCHD: Chapter/Title/Off
Audio CD, MP3, WMA: Track/All/Off
Note:
If you press > once during Repeat Chapter/Track
playback, the repeat playback cancels.
DVD
MP3
Repeating a specific portion (A-B):
During playback, press REPEAT to select [A-] at the
beginning of the portion you wish to repeat and press
ENTER at the end of the portion.
To return to normal playback, press REPEAT repeatedly
to select [Off].
Note:
You cannot select a portion less than 3 seconds.
DVD
AVCHD
BD
ACD
Playing in random order:
During playback, press REPEAT repeatedly to select a
Random (
) or Random All (
All) mode icon.
The tracks or files will be played in random order. To
return to normal playback, press REPEAT repeatedly to
delete the mode icons.
ACD
MP3
WMA
Tip: When you are using the repeat, A-B repeat or random functions in the [MUSIC] menu, refer to the mode
icons as shown below.
Track – The current track or file will be played back
repeatedly.
All – All the tracks or files will be played back repeatedly.
– Selected portion will be repeated continually.
(Audio CD only)
– The tracks or files will be played back in random
order.
All – All the tracks or files will be played back
repeatedly in random order.
To cancel the A-B repeat, repeat or Random playback,
press CLEAR.
ACD
MP3
WMA
Discs
BD
ACD
WMA AVCHD
Continued t
22
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 23
General playback features (Continued)
Operations
SUBTITLE
During playback, press SUBTITLE repeatedly to select a DVD
desired subtitle language.
Note:
Some discs allow you to change subtitle selections only
via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose the
appropriate subtitle from the selections on the disc
menu.
BD
AVCHD
SUBTITLE ON/OFF
During playback, press SUBTITLE ON/OFF to switch
the subtitle on or off.
DVD
BD
AVCHD
AUDIO
During playback, press AUDIO repeatedly to hear a different audio language or audio track.
Notes:
• Some discs allow you to change audio selections only
via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose the
appropriate audio from the selections on the disc
menu.
• Immediately after you have switched sound, there
may be a temporary discrepancy between the display
and actual sound.
• On BD-ROM disc, the multi audio format (5.1CH or
7.1CH) is displayed with [MultiCH] in the on-screen
display.
DVD
BD
AVCHD
Notes on general features:
•
•
•
When you turn on the player or replace a disc, the player returns to the initial default setting. Depending
on a disc, a specific type of audio the disc has is output.
Depending on the pre-recorded contents of the BD-ROM, some functions may not be available or may be
operated differently than other media.
Some noise could be heard for a while when turning on the player. The noise is occurred by mechanical
operations of the player but it is not a malfunction.
Operation
Discs
Buttons
23
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 24
If a disc menu screen is displayed
DVD
BD
AVCHD
Use b / B / v / V buttons to select the title/chapter
you want to view, then press ENTER to start playback.
Enlarge the playback image
AVCHD
BD
1. During playback or pause mode, press ZOOM to
display the [Zoom] menu.
2. Use green or yellow buttons to zoom in or out
the picture. You can move through the zoomed
picture using v V b B buttons.
3. To return to the normal picture size, press yellow
button repeatedly to fully zoom out the picture.
Press RETURN to exit the [Zoom] menu.
Note:
This function may not work on some disc or titles.
Time Search DVD
BD
AVCHD
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. For example, to
find a scene at 2 hours, 10 minutes, and
20 seconds, enter “21020” and press ENTER. If
you enter the wrong numbers, press CLEAR to
remove the numbers you entered. Then input the
correct numbers.
4. Press ENTER to confirm. Playback starts from
the selected time.
Note:
This function may not work on some disc or titles.
Skip Search DVD
BD
AVCHD
You can skip the playback 15 seconds forward or
backward using the search menu.
1. During playback, press SEARCH and the search
menu appears on the screen.
2. Press b / B to skip the playback forward or
backward.
Tip:
You can select a point that you want to skip by
pressing and holding b / B button.
Note:
This function may not work on some disc or titles.
24
BD
AVCHD
To enter a Marker
The menu screen may be displayed first after loading
a disc which contains a menu.
DVD
Marker Search DVD
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press a number button to select a marker number that you want to recall. Playback starts from
the marked scene.
OR
Press V to highlight a marker number. Use b / B
to select a marked scene that you want to recall
or clear.
Press ENTER and playback starts from the
marked scene. Press CLEAR and the marked
scene is erased from the search menu.
Notes:
• This function may not work on some disc or
titles.
• All marked points are cleared if you press
x (STOP) twice (complete stop), the title is
changed or unload the disc.
Watching from a different angle
BD
DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different camera angle during playback.
1. Press DISPLAY during playback.
2. Press v / V to select the angle icon then use
b B to select desired angle.
Last Scene Memory DVD
BD
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Notes:
• Settings are stored in memory for use any time.
• This unit does not memorize settings of a disc if
you switch off the unit before commencing to
play it.
• Last Scene Memory function for a previous disc
is erased once a different disc is played.
• This function may not work depending on the
disc.
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 25
Using Color (R, G, B, Y) Buttons BD
These buttons are available only during BD-J
contents playback. Use the appropriate buttons as
indicated by the display. Depending on the disc
contents, the functions of each button may differ.
Screen Saver
The screen saver appears when you leave the player in Stop mode for about five minutes. If the Screen
Saver is displayed for five minutes, the unit automatically turns itself off.
Displaying Disc Information
On-Screen DVD BD AVCHD
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback information.
The items displayed differ depending on the disc
type or playing status.
Changing content list view MP3 WMA
third
push
first
push
second
push
Note:
The equalizer will be disappeared when you change
the music contents list view.
2. During BD-ROM or DVD playback, you can
select an item by pressing v / V and change or
select the setting by pressing b / B.
Title/Track – Current title/track number/total
number of titles/tracks.
Chapter – Current chapter number/total number of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Notes:
• If no button is pressed for a few seconds, the onscreen display disappears.
• A title number cannot be selected on some discs.
• An item may not be available on some discs or
titles.
• If BD interactive title is playing back, some setting information is displayed on the screen but
prohibited to be changed.
Operation
On the [MUSIC] and [PHOTO] menu, you can
change the content list view by pressing DISPLAY
repeatedly.
25
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 26
Playing a DVD VR Format Disc
This unit will play DVD-RW disc that is recorded
using the Video Recording (VR) format.
1. Insert a disc and close the tray.
The [MOVIE] menu appears on the TV screen.
2. Press b / B to select a title then press
N (PLAY) and playback starts.
You can use variable playback functions.
Refer to pages 21-25.
3. Press DISC MENU to move to the list menu.
Notes:
• On the [MOVIE] menu, use red or blue button to
move to the first or the last file or track and green
or yellow button to move to the previous or next
page.
• Unfinalized DVD-VR format discs may not be
played in this player.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. This unit cannot support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
26
8/31/09
12:16 PM
Playing an Audio CD or
MP3/WMA files ACD MP3
Page 27
MP3/WMA audio file requirement
WMA
File extensions: “.mp3”, “.wma”
The player can play Audio CDs and MP3/WMA files.
Before playing MP3/WMA files, read “MP3/WMA
audio file requirement” on right.
Sampling frequency: within 11 - 48 kHz (MP3),
within 8 - 48 kHz (WMA)
1. Insert Audio CD or a disc containing MP3/WMA
files, or connect the USB Flash Drive containing
MP3/WMA files
CD-R/RW, DVD-R/RW, +R/+RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
2. Press HOME and Home Menu appears.
3. Select [Music] then press ENTER.
The [MUSIC] menu appears on the TV screen.
Note:
When the USB Flash Drive is connected and a
disc is inserted simultaneously, the menu for
selecting a media will appear. Select a media
then press ENTER.
Example) Audio CD
4. Use v / V / b / B to select a track or file then
press N (PLAY). Playback starts.
You can use variable playback functions. Refer
to pages 21-25.
Bit rate: within 8 - 320 kbps (MP3, WMA)
Maximum Files/Folder:
Less than 2,000 (total number of files and folders)
Notes on MP3/WMA file
• Depending on the size and number of the
MP3/WMA files, it may take several minutes to
read the contents of the media.
• This unit cannot support the ID3 Tag embedded
in the MP3 file.
• The total playback time indicated on the screen
may not correct for VBR files.
Operation
BD320-JN_BUSAJJK_OM_ENG
5. To stop playback at any time, press x (STOP).
Tips:
• To go directly to any track or file and play, enter
the track/file number using the numbered
buttons (0-9).
• The playback may start automatically if the
Audio CD inserted.
• Use v/V/b/B to select a folder then press
ENTER and you can view the files in the folder.
If you want to move to the upper or lower
directory, use v/V to move to the desired directory.
• On the [MUSIC] menu, use red or blue button to
move to the first or the last file or track and
green or yellow button to move to the previous or
next page.
• The equalizer indicator is not coupled with the
music in play back.
• If there is impossible code to express in the file
name, it may be displayed as illegible.
27
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Viewing a Photo file
Page 28
PHOTO
This unit can play photo files. Before playing photo
files, read “Photo file requirement” on below.
1. Insert a disc containing photo files, or connect
the USB Flash Drive containing photo files.
Options during viewing a photo file
in full screen
You can use various options during viewing a picture
in full screen. Use v V b B to select an option and
use the options as described below.
a
2. Press HOME and Home Menu appears.
3. Select [Photo] then press ENTER.
The [PHOTO] menu appears on the TV screen.
Note:
When the USB Flash Drive is connected and a
disc is inserted simultaneously, the menu for
selecting a media will appear. Select a media
then press ENTER.
4. Use v / V / b / B to select a file and press ENTER.
The selected image is displayed in full screen.
5. To stop viewing at any time, press x (STOP).
The PHOTO menu appears.
Tips:
• To go directly to any file and play, enter the file
number using the numbered buttons (0-9).
• Use v/V/b/B to select a folder then press
ENTER and you can view the files in the folder.
If you want to move to the upper or lower directory, use v/V to move to the desired directory.
• On the [MUSIC] menu, use red or blue button to
move to the first or the last file or track and
green or yellow button to move to the previous or
next page.
• If there is impossible code to express in the file
name, it may be displayed as illegible.
• You can change the content list view by pressing
DISPLAY repeatedly.
• You can start the slide show by pressing
N (PLAY) while the [PHOTO] menu appears.
To start the slide show, choose the folder containing photo files or the photo file then press
N (PLAY).
28
b
c
d
e
f
g
h
a Use b B to advance to the previous or next file.
b Press ENTER to start or pause the slide show.
c Press ENTER to play or pause the background
music. This option is available after the background
music is selected using [Music Select] option.
d Selects the background music.
1) Press ENTER and the menu will appear.
2) Use v V b B to select a media or folder that
there are music file(s).
3) Press ENTER to confirm your selection.
e Press ENTER to rotate the picture clockwise.
This option is not available during slide show.
f Use green or yellow buttons to zoom in or out the
picture. You can move through the zoomed picture
using v V b B buttons. Press RETURN to exit the
[Zoom] menu and return to the normal picture size.
• The zoom function can be operated by the
ZOOM button on the remote control.
g Use v V to selects an option between [Effect] or
[Delay].
Use b B to adjusts and press ENTER to set the
selected option.
[Effects] – You can apply various effects when sliding photos.
OFF: Slide Show without any effect.
Random: Slide show effects are applied randomly.
Slide: Slides a photo from various direction.
Door: Photo will be appear like door opening.
Lattice: Photo will be appear from tiled pieces to
full screen image
[Delay] – You can set the photo delaying time while
Slide Show.
h Press ENTER to exit the option menu.
To appear the menu again, press ENTER.
Photo file requirement
File extensions: “.jpg”, “.jpeg”, “.png”
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
CD-R/RW, DVD-R/RW, +R/+RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder:
Less than 2,000 (total number of files and folders)
Notes on Photo file
Progressive and lossless compression photo
image files are not supported.
Depending on the size and number of the photo
files, it may take several minutes to read the
contents of the media.
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 29
Reference
Language Codes
Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and
[Disc Menu].
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6589
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Choose an Area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Code
Ethiopia
ET
Fiji
FJ
Finland
FI
France
FR
Germany
DE
Great Britain
GB
Greece
GR
Greenland
GL
Herd and Mcdonald Islands HM
Hong Kong
HK
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Reference
Area Codes
29
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 30
Troubleshooting
Symptom
Possible Cause
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet securely.
The power is on, but
the player does not
work.
• No disc is inserted.
• Insert a disc.
No picture.
• The TV is not set to receive video
signal output.
• Select the appropriate video input
mode on the TV.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The selected resolution is not capable with your TV.
• Select another resolution using
RESOLUTION button.
• The equipment connected with the
audio cable is not set to receive disc
signal output.
• Select the correct input mode of the
audio receiver so you can listen to
the sound from the player.
• The power of the equipment connected with the audio cable is turned off.
• Turn on the equipment connected
with the audio cable.
• The [AUDIO] options are set to the
wrong position.
• Set the [AUDIO] options to the correct position (see page 18).
• The player is in reverse play, fast forward, slow motion or pause mode.
• Return to the normal playback.
• The disc is upside down.
• Insert the disc with the playback side
down.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the
disc type and regional code.)
• The rating level is set.
• Change the rating level.
• The disc was recorded on another
unit and was not finalized.
• Finalize the disc on that unit.
No sound.
The player does not
start playback.
The Remote Control
• The Remote Control is not pointed at
the remote sensor on the player.
does not work properly.
The system does not
function at all.
30
Correction
• Point the Remote Control at the
remote sensor of the player.
• The Remote Control is too far from
the player.
• Operate the Remote Control closer to
the player.
• A state is unstable.
• Unplug the power cord and then plug
the power cord again after more than
five seconds.
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 31
Specifications
General
Power requirements:
AC 120 V~, 60 Hz
Power consumption:
23W
Dimensions (W x H x D):
Approx. 16.9 x 1.4 x 7.9 inches (430 x 35 x 200 mm) without foot
Net Weight (Approx.):
4.6 lbs (2.1 kg)
Operating temperature:
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity:
5 % to 90 %
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A)
ANALOG AUDIO OUT:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
System
Laser:
Semiconductor laser, wavelength: 405nm / 650 nm
Signal system:
Standard NTSC Color TV system
Frequency response:
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Signal-to-noise ratio:
More than 100 dB (ANALOG OUT connectors only)
Harmonic distortion:
Less than 0.008%
Dynamic range:
More than 95 dB
Bus power supply:
DC 5 V
Accessories:
Video cable (1)
Audio cable (1)
Remote control (1)
Batteries (1)
Note: Design and specifications are subject to change without prior notice.
Reference
500 mA
31
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 32
The unit’s Audio Output Specifications
Jack/
Setting
Source
Analog Output
Stereo
SPDIF (DIGITAL AUDIO OUT)*5
PCM
Stereo
DTS
Re-encode*3, *6
Primary
Pass-Thru*1
Dolby Digital
PCM 2ch
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
PCM 2ch
DTS
Dolby Digital
Dolby TrueHD
PCM 2ch
PCM 2ch
DTS
Dolby Digital
DTS
PCM 2ch
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
PCM 2ch
DTS
DTS
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 5.1ch
PCM 2ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 7.1ch
PCM 2ch
PCM 2ch
DTS
PCM 2ch
PCM
Stereo
PCM
Multi-Ch*3
Jack/
Setting
Source
HDMI OUT
DTS
Re-encode*6
Primary
Pass-Thru *1, *2, *3
Dolby Digital
PCM 2ch
PCM 5.1ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
PCM 7.1ch
DTS
Dolby Digital Plus
Dolby TrueHD
Dolby TrueHD
PCM 2ch
PCM 7.1ch
DTS
DTS
PCM 2ch
PCM 5.1ch
DTS
DTS
DTS-HD
PCM 2ch
PCM 7.1ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 5.1ch
PCM 2ch
PCM 5.1ch
DTS
PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 7.1ch
DTS
PCM 7.1ch*4
Notes:
*1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI]
option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and
secondary audio.)
*2 This player automatically selects the HDMI audio according to the decoding capability of the connected
HDMI device even though [HDMI] option is set to [Primary Pass-Thru].
*3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option and [DTS Re-Encode] setting of the
[SPDIF] option cannot be set together. If you set the [HDMI] option to [PCM Multi-CH] or [Primary PassThru], the [SPDIF] option is set to [PCM Stereo] automatically. Also, if you set the [SPDIF] option to [DTS
Re-Encode], the [HDMI] option is set to [PCM Stereo] automatically.
*4 The LPCM audio recorded at 192kHz sampling frequency will be outputted as stereo sound.
*5 On the PCM audio output, the sampling frequency of SPDIF (DIGITAL AUDIO OUT) is limited to 96 kHz.
*6 If the [HDMI] or [SPDIF] option is set to [DTS Re-Encode], the audio output is limited to 48 kHz and 5.1
ch. If the [HDMI] or [SPDIF] option is set to [DTS Re-Encode], the DTS Re-Encode audio is outputted for
BD-ROM discs, and the original audio is outputted for the other discs (like [Primary Pass-Thru]).
• If [HDMI] option is set to [PCM Multi-CH] and [SPDIF] option is set to [Primary Pass-Thru] when the unit
plays back Dolby Digital Plus or TrueHD audio, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM 2ch”.
• If the HDMI connection is version 1.3 and Dolby Digital Plus/Dolby TrueHD is outputted from HDMI OUT
jack, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM 2ch” (When the HDMI and SPDIF are
connected simultaneously).
• The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD
while playback.
• The Dolby TrueHD audio recorded on some Blu-ray discs consists of Dolby Digital and TrueHD audio.
Dolby Digital audio is output through DIGITAL AUDIO OUT jacks and "DD" displays on the screen if
TrueHD audio is not output (for example, when [HDMI] is set to [PCM Stereo] and [SPDIF] is set to
[Primary Pass-Thru]).
• The analog 2 channel output connection is always output PCM 2CH sound.
32
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 33
Open source software notice
This product includes
•
•
•
•
•
•
•
•
•
•
Freetype library : copyright © 2003 The FreeType Project (www.freetype.org).
libpng library : copyright © 2004 Glenn Randers-Pehrson
Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and Mark Adler.
Expat library : copyright © 2006 expat maintainers.
OpenSSL library :
– cryptographic software written by Eric Young (eay@cryptsoft.com).
– software written by Tim Hudson (tjh@cryptsoft.com).
– software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)
libcurl library : Copyright © 1996 - 2008, Daniel Stenberg, daniel@haxx.se
boost C++ library : © Copyright Beman Dawes 1999-2003
UPnP SDK : Copyright © 2000-2003 Intel Corporation
Libnet : © 1998 - 2004 Mike D. Schiffman mike@infonexus.com
Libpcap
This product includes other open source software.
• Copyright © David L. Mills 1992-2006
• Copyright © 1998-2003 Daniel Veillard.
• Copyright © 1998, 1999 Thai Open Source Software Center Ltd.
• Copyright © 1990 The Regents of the University of California.
• Copyright © 1998-2005 The OpenSSL Project.
• Copyright © 1991, 1992 Paul Kranenburg <pk@cs.few.eur.nl>
• Copyright © 1993 Branko Lankester <branko@hacktic.nl>
• Copyright © 1993 Ulrich Pegelow <pegelow@moorea.uni-muenster.de>
• Copyright © 1995, 1996 Michael Elizabeth Chastain <mec@duracef.shout.net>
• Copyright © 1993, 1994, 1995, 1996 Rick Sladkey <jrs@world.std.com>
• Copyright © 1999,2000 Wichert Akkerman <wakkerma@debian.org
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
Reference
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
33
BD320-JN_BUSAJJK_OM_ENG
34
8/31/09
12:16 PM
Page 34
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 35
Reference
MEMO
35
BD320-JN_BUSAJJK_OM_ENG
8/31/09
12:16 PM
Page 36
XV-BP10 / XV-BP11
EN
0809SKMLGEEGL
P/N: MFL62026484