User guide | Epson 3 Printer User Manual

Title page
Nortel Communication Server 1000
IP Phone 2001
User Guide
Revision history
Revision history
August 2005
Standard 4.00. This document is up-issued to support
Nortel Communication Server 1000 Release 4.5.
February 2005
Standard 3.00. This document is up-issued to support the 8.x
Firmware Upgrade for IP Phones.
September 2004
Standard 2.00. This document is up-issued to support
Nortel Communication Server 1000 Release 4.0.
June 2004
Standard 1.00. This document is issued to support Nortel
Communication Server 1000 Release 4.0.
3
Revision history
4
Contents
Contents
About the Nortel IP Phone 2001 . . . . . . . . . . . . . . . . . . . . . . 9
Basic features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Telephone controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Telephone display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Call features and Flexible Feature Codes . . . . . . . . . . . . . . . 14
Security features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting the components . . . . . . . . . . . . . . . . . . . . . . . . 16
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting the components of the phone . . . . . . . . . . . . . . . 16
Configuring options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the Telephone Option menu . . . . . . . . . . . . . . . . . . . . . 18
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the display screen contrast . . . . . . . . . . . . . . . . 21
Selecting a language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Selecting date/time format . . . . . . . . . . . . . . . . . . . . . . . . 22
Selecting local dialpad tone . . . . . . . . . . . . . . . . . . . . . . . 23
Selecting a Ring type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Viewing telephone information . . . . . . . . . . . . . . . . . . . . . 24
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using off-hook dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using on-hook dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using Predial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Activating Ring Again . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using Speed Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Making a System Speed Call . . . . . . . . . . . . . . . . . . . . . . . . . 32
5
Contents
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
While on an active call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Placing a call on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Transferring a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using Timed Reminder Recall . . . . . . . . . . . . . . . . . . . . . . . . 35
Using Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Recording a Calling Party Number . . . . . . . . . . . . . . . . . . . . . 38
Tracing a malicious call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
While away from your desk . . . . . . . . . . . . . . . . . . . . . . . . . 40
Using Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Using Internal Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using Remote Call Forward . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Securing your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Talking with more than one person . . . . . . . . . . . . . . . . . . 46
Setting up a conference call . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Using Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Working without interruption . . . . . . . . . . . . . . . . . . . . . . . 49
Using Make Set Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Additional calling features . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Using Call Page Connect to make an announcement . . . . . . 50
Charging a call or charging a forced call . . . . . . . . . . . . . . . . 51
Using Enhanced Override . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Using Forced Camp-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Overriding a busy signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using Privacy Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using Radio Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
6
Contents
Additional phone features . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Using Virtual Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Logging in to Virtual Office . . . . . . . . . . . . . . . . . . . . . . . . 61
Using Virtual Office on your remote telephone . . . . . . . . . . . . 62
Using Virtual Office on your office telephone . . . . . . . . . . 64
Logging out of Virtual Office . . . . . . . . . . . . . . . . . . . . . . . 65
Troubleshooting Virtual Office . . . . . . . . . . . . . . . . . . . . . 66
Using Media Gateway 1000B . . . . . . . . . . . . . . . . . . . . . . . . . 68
Using Test Local Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Using Resume Normal Mode . . . . . . . . . . . . . . . . . . . . . . 69
Troubleshooting MG 1000B . . . . . . . . . . . . . . . . . . . . . . . 70
Using Hospitality features . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Configuring Automatic Wake-Up . . . . . . . . . . . . . . . . . . . . . . 71
Using External Server Applications . . . . . . . . . . . . . . . . . . 73
Flexible Feature Codes (FFCs) . . . . . . . . . . . . . . . . . . . . . . 74
Terms you should know . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
7
Contents
8
About the Nortel IP Phone 2001
About the Nortel IP Phone 2001
The Nortel IP Phone 2001 brings voice and data to the desktop by
connecting directly to a Local Area Network (LAN) through an Ethernet
connection.
Note 1: All features are not available on all telephones. Consult your
system administrator to verify which features are available for your
use.
Note 2: In this guide, soft key labels display directly above the
soft key.
Basic features
The IP Phone 2001 supports the following features:
•
four soft keys (self-labeled) providing access to a maximum of
ten features
Note: Some IP Phone 2001 phones are not configured to support soft
key functionality. Consult your system administrator.
•
multi-field LCD display screen
•
speaker for on-hook dialing or on-hook listening
•
volume control bar for adjusting ringer, speaker, and handset volume
•
two specialized fixed keys:
— Services
— Message (Inbox)
•
three call processing fixed keys:
— Line
— Hold
— Goodbye
•
automatic network configuration
9
About the Nortel IP Phone 2001
Figure 1 illustrates the IP Phone 2001.
Figure 1: IP Phone 2001
Telephone controls
Note: Some IP Phone 2001 phones come with optional key caps.
Text in parenthesis indicates labels appearing on the key caps. For
example, (Goodbye).
Use the Volume control bar to adjust the
volume of the ringer, handset, and speaker.
Press the right side of the rocker bar to
increase volume; press the left side to
decrease volume.
(Line)
10
Use the Line (DN) key to access the single
line and activate on-hook dialing. No status
icon or LED is provided.
About the Nortel IP Phone 2001
Use the Goodbye key to terminate an
active call.
(Goodbye)
(Hold)
Press the Hold key to put an active call
on hold. Press the Line (DN) key to return to
the caller on hold.
Press the Message (Inbox) key to access
your voice mailbox.
(Msg/Inbox)
Use the Navigation keys to scroll through
menus and lists appearing on the LCD
display screen.
(Services)
Press the Services key and use the
Navigation keys to access the following
items:
•
Telephone Options:
— Volume adjustment
— Contrast adjustment
— Language
— Date/Time
— Local DialPad Tone
— Set Information
— Ring type
•
Password Admin:
— Station Control Password
•
Virtual Office Login and Virtual Office
Logout (if Virtual Office is configured)
11
About the Nortel IP Phone 2001
Note 1: Press the Services key to exit
from any menu or menu item.
Continued
Note 2: The Password Admin menu is
not available on all IP Phone 2001
phones. Consult your system
administrator.
Soft keys (self-labeled) are located
below the LCD screen. The LCD screen
above the key changes, based on the
active feature.
Note: When a triangle appears before a
key label, the feature is active.
When a message has been left for the
user, the Message waiting indicator
flashes. Also, this indicator flashes when
the telephone ringer is ON.
12
About the Nortel IP Phone 2001
Telephone display
The IP Phone 2001 has two display areas:
•
The upper display area contains single-line information for items
such as the caller number, caller name, feature prompt strings,
user-entered digits, date and time information, and telephone
information.
•
The lower display area provides soft key label information.
Figure 2 shows the idle LCD screen.
Figure 2: IP Phone 2001 screen
13
About the Nortel IP Phone 2001
Call features and Flexible Feature Codes
System administration is required for call features and Flexible Feature
Codes (FFCs). Contact your system administrator to configure these
features and codes on your telephone.
Call features and FFCs must be assigned to your telephone and
supported by system software.
Security features
Your Station Control Password (SCPW) enables the following security
features:
•
Electronic Lock to prevent others from making calls from your
telephone.
•
Password-protected telephone features (for example,
Remote Call Forward).
Your initial SCPW is defined by your system administrator. Contact your
system administrator for detailed information.
To change your password (SCPW):
1. Press the Services key.
(Services)
2. Press the Navigation keys to scroll and
highlight Password Admin.
3. Press the Select soft key.
14
About the Nortel IP Phone 2001
4. Use the dialpad to enter your password
at the prompt.
5. Press the Navigation keys to scroll and
highlight New Password.
6. Press the Select soft key.
7. Use the dialpad to enter the new
password.
8. Press the Select soft key to accept the
new password.
Note: If you have been locked out of
your IP Phone 2001, or have forgotten
your SCPW, contact your system
administrator.
15
Connecting the components
Connecting the components
Before you begin
CAUTION
Damage to equipment
Do not plug the IP Phone 2001 into a
regular telephone jack. This results in
severe damage to the IP Phone. Consult
your system administrator to ensure that
you plug your telephone into a 10/
100BaseT Ethernet jack.
Connecting the components of the phone
1. Connect one end of the handset cord to the handset jack (identified
with a handset icon) on the back of the telephone. Connect the other
end to the jack on the handset.
2. Connect one end of the CAT-5 line cable to the LAN Ethernet port
located on the back of the telephone (identified with a LAN icon).
Plug the other end of the CAT-5 line cable into the IP network.
3. Contact your installation technician for the proper power option.
This telephone can be powered by an AC adapter or over a LAN.
4. Thread the cord around the strain relief, retaining hook, and channel
provided for a secure power connection.
5. Secure the telephone footstand to the telephone base.
16
Connecting the components
Figure 3: IP Phone 2001 connections
17
Configuring options
Configuring options
The IP Phone 2001 Services menu lists the following submenus:
•
The Telephone Option menu enables you or your system
administrator to configure telephone preferences. Figure 4 illustrates
the choices available in this menu.
•
The Password Admin menu enables you or your system
administrator to change the Station Control Password.
•
The Virtual Office Login and Test Local Mode (for Branch Office)
menus are listed when an IP Phone 2001 Class of Service is
configured for Virtual Office and Branch Office. For more information,
see page 60.
Note: The Password Admin, Virtual Office Login, and Test Local
Mode menus are not available on all IP Phone 2001 phones. Consult
your system administrator.
Figure 4: Telephone Option menu
Volume adjustment...
Local DialPad Tone
Contrast adjustment
Set Info
Language...
Ring type...
Date/Time...
Using the Telephone Option menu
Use the Telephone Option menu to access the following:
•
“Adjusting the volume” on page 20
•
“Adjusting the display screen contrast” on page 21
•
“Selecting a language” on page 21
•
“Selecting date/time format” on page 22
•
“Selecting local dialpad tone” on page 23
18
Configuring options
•
“Selecting a Ring type” on page 23
•
“Viewing telephone information” on page 24
When an option has a sublist, an ellipsis (...) appears after the option.
To use the Telephone Option menu:
1. Press the Services key.
(Services)
2. Press the Navigation keys to scroll and
highlight Telephone Option.
3. Press the Select soft key.
4. Press the Navigation keys to scroll and
highlight an option (for example,
Language...).
5. Press the Select soft key. The display
provides information required to adjust
your selection.
6. Choose one of the following:
or
— Press the Select soft key to save
changes and return to the
Telephone Option menu.
— Press the Cancel soft key to keep
existing configurations.
19
Configuring options
Adjusting the volume
To adjust the volume, press the Services key and select Volume
adjustment... from the Telephone Option menu. Choose one of the
following:
•
Ringer
•
Handset
•
On-hook dialing/listen
•
Buzzer
To adjust the volume:
1. Press the Navigation keys to scroll and
highlight one of the following:
—
Ringer
—
Handset
—
On-hook dialing/listen
—
Buzzer
2. Press the Select soft key.
3. Choose one of the following to increase
or decrease the volume:
— Press the Lower/Higher soft keys.
or
20
— Press the Navigation keys.
Configuring options
4. Choose one of the following:
— Press the Select soft key to save the
volume level and return to the
Telephone Option menu.
or
— Press the Cancel soft key to keep
existing configurations.
Adjusting the display screen contrast
To adjust the LCD display screen contrast, press the Services key and
select Contrast adjustment from the Telephone Option menu.
To adjust the display screen contrast:
1. To increase or decrease the display
contrast level, choose one of the
following:
— Press the Lower/Higher soft keys.
or
— Press the Navigation keys.
2. Choose one of the following:
or
— Press the Select soft key to save the
contrast level and return to the
Telephone Option menu.
— Press the Cancel soft key to keep
existing configurations.
Selecting a language
The display can show information in any of several languages. To choose
a language, press the Services key and select Language… from the
Telephone Option menu.
21
Configuring options
To select a language:
1. Press the Navigation keys to scroll and
highlight the desired language (for
example, German [Deutsche]).
Deutsche
2.
Choose one of the following:
— Press the Select soft key to save the
language and return to the
Telephone Option menu.
or
— Press the Cancel soft key to keep
existing configurations.
Selecting date/time format
There are several date/time formats, based on the 12-hour clock or the
24-hour clock. To select a date/time format, press the Services key and
select Date/Time… from the Telephone Option menu.
To select a date/time format:
1. Press the Navigation keys to scroll and
highlight the desired format. Sample
formats appear in the upper right–side of
the display area.
2. Choose one of the following:
or
— Press the Select soft key to save the
format and return to the
Telephone Option menu.
— Press the Cancel soft key to keep
existing configurations.
22
Configuring options
Selecting local dialpad tone
Use the Local DialPad Tone option if you want the telephone dialing keys
to produce a sound when you press them. Your choices are:
•
Dual Tone Multi-Frequency (DTMF) sounds
•
a single tone
•
no sound.
To choose a local dialpad tone, press the Services key and select Local
DialPad Tone from the Telephone Option menu.
To select local dialpad tone:
1. Press the Navigation keys to scroll and
highlight one of the following dialpad
tones:
— None to disable all tones.
— Short Click to enable a single tone
for all keys.
— DTMF to turn on a separate DTMF
tone for each key.
2. Choose one of the following:
or
— Press the Select soft key to save the
tone selection and return to the
Telephone Option menu.
— Press the Cancel soft key to keep
existing configurations.
Selecting a Ring type
Use the Ring type option to configure the telephone’s ring tone. To
choose a ring type, press the Services key and select Ring type… from
the Telephone Option menu.
23
Configuring options
To select a ring type:
1. Press the Navigation keys to scroll and
highlight one of the ring types.
Ring type 3
2. Press the Play soft key to sample the
ring tone.
3. Choose one of the following:
or
— Press the Select soft key to save the
ring type and return to the
Telephone Option menu.
or
— Press the Stop soft key and use the
Navigation keys to select a different
ring type.
— Press the Cancel soft key to keep
existing configurations.
Viewing telephone information
The Set Info option displays the following telephone-specific information:
•
IP address
•
Hardware ID of the IP Phone
•
Current firmware version
To view telephone information, press the Services key and select Set
Info from the Telephone Option menu.
24
Configuring options
To view telephone information:
1. Press the Navigation keys to scroll
through the list containing telephone
information.
2. Press the Cancel soft key to return to
the Telephone Option menu.
25
Making a call
Making a call
This section describes the various methods that you can use to make a
call:
•
“Using off-hook dialing” on page 26
•
“Using on-hook dialing” on page 27
•
“Using Predial” on page 27
•
“Activating Ring Again” on page 29
•
“Using Last Number Redial” on page 30
•
“Using Speed Call” on page 31
•
“Making a System Speed Call” on page 32
Using off-hook dialing
Use the off-hook dialing option to dial the number after you have lifted the
handset.
1. Lift the handset.
2. Dial the number.
3. To terminate the call, choose one of the
following:
or
(Goodbye)
26
— Replace the handset into the cradle.
— Press the Goodbye key.
Making a call
Using on-hook dialing
Use on-hook dialing to dial the number before lifting the handset.
1. Leave the handset in the cradle.
2. Press the Line (DN) key.
(Line)
3. Dial the number when the dial tone
sounds.
4. When the called party answers, lift the
handset.
5. To terminate the call, choose one of the
following:
or
— Replace the handset into the cradle.
— Press the Goodbye key.
(Goodbye)
Using Predial
Use the Predial feature to enter, preview, and edit numbers before
dialing.
To use Predial:
1. Without selecting the Line (DN) key,
enter the number to be dialed.
27
Making a call
2. Press the Line (DN) key to dial the
number.
(Line)
3. Lift the handset when the called party
answers.
4. Choose one of the following to terminate
the call:
or
— Replace the handset into the cradle.
— Press the Goodbye key.
(Goodbye)
To edit a Predial number:
1. Without selecting the Line (DN) key,
enter the number to be dialed.
2. Choose one of the following:
— To erase all numbers, press the
Clear soft key. Re-enter numbers to
be dialed.
— To change numbers one-at-a-time,
press the Delete soft key to
backspace. Re-enter a new number.
3. Press the Line (DN) key to dial the
number.
(Line)
28
Making a call
Activating Ring Again
Use the Ring Again feature if you receive a busy tone or if there is no
answer. Your IP Phone rings when the person you called becomes
available. Ring Again automatically redials the number.
To activate Ring Again:
1. Dial a number and receive a busy tone
or no answer.
2. Choose one of the following:
— Press the Ring Again soft key.
or
— Enter the Ring Again Activate FFC.
To call a Ring Again party when you receive notification:
1. After receiving the notification tone,
lift the handset.
2. Press the Ring Again soft key to
automatically dial the number.
29
Making a call
To deactivate Ring Again before notification:
Choose one of the following:
— Before hearing the notification tone,
press the Ring Again soft key a
second time.
or
— Enter the Ring Again Deactivate
FFC.
Using Last Number Redial
Use the Last Number Redial feature to automatically redial the last dialed
number.
To use Last Number Redial with the handset:
1. Lift the handset.
2. Press the Line (DN) key.
(Line)
To use Last Number Redial without lifting the handset:
(Line)
30
(Line)
Without lifting the handset, press the Line
(DN) key twice (the last number dialed is
automatically redialed).
Making a call
Using Speed Call
Use the Speed Call feature to place internal and external calls by dialing a
one-, two-, or three-digit code.
To create a Speed Call number:
1. Press the Speed Call Controller soft
key. The triangular icon flashes,
indicating programming mode.
2. At the prompt:
— Enter a one-, two-, or three-digit
code (0-999).
— If required, enter the access code
(for example, “9”).
— Enter the telephone number
(internal, external, or long-distance
number).
3. Press the Speed Call Controller soft
key again to save the code and number.
The flashing icons turns off.
To make a Speed Call:
1. Lift the handset.
2. Press the Speed Call Controller soft
key.
31
Making a call
3. Dial the Speed Call code to
automatically dial the number.
Making a System Speed Call
Use the System Speed Call feature to dial Speed Call codes that override
dialing restrictions placed on your telephone.
To make a System Speed Call:
1. Lift the handset.
2. Choose one of the following:
or
— Press the System Speed Call
(SScUsr) soft key.
— Press the System Speed Call
Controller (SScCtl) key.
3. Dial the Speed Call code to
automatically dial the number.
32
Answering a call
Answering a call
Each incoming call causes the telephone to ring and the
Message Indicator lamp to flash.
To answer a call:
Lift the handset.
Note: Do not use the Line (DN) key to answer a call.
33
While on an active call
While on an active call
Use the following features during an active call:
•
“Placing a call on hold” on page 34
•
“Transferring a call” on page 34
•
“Using Timed Reminder Recall” on page 35
•
“Using Call Park” on page 36
•
“Recording a Calling Party Number” on page 38
•
“Tracing a malicious call” on page 38
Placing a call on hold
Use the Hold feature when talking on one line and another call arrives on
a second line. Retain the original call by putting it on hold and then
answer the second call.
To place a call on hold:
Press the Hold key.
(Hold)
To retrieve a call on hold:
Press the Line (DN) key.
(Line)
Transferring a call
Use the Transfer feature to redirect a call to the appropriate person.
34
While on an active call
To use the Transfer feature to direct a call to a third party:
1. Press the Transfer soft key. The other
party is on hold and a dial tone sounds.
2. Dial the DN number to which the call is
transferred.
3. When that number rings or a person
answers, press the Transfer soft key to
connect the calling party.
To return to the original call, if the transfer is incomplete:
(Line)
If the person called is not available,
press the Line (DN) key to reconnect to
the original call.
Using Timed Reminder Recall
Use the Timed Reminder Recall feature to receive a reminder tone when
a transferred call is not answered.
To activate Timed Reminder Recall:
1. Press the Transfer soft key. The call is
put on hold.
2. Dial the number to which the call is being
transferred.
35
While on an active call
3. Choose one of the following to start the
recall timer:
or
— Press the Transfer soft key again.
— Replace the handset before the
extension answers.
If the transfer is complete, the recall
timer stops.
If the transferred call is not answered, your telephone rings:
1. Lift the handset to reconnect to the
original caller.
2. Choose one of the following:
— Press the Transfer soft key and
repeat the transfer (to a different
DN).
(Goodbye)
— If the transfer is picked up while you
are on the line, press the Goodbye
key to complete the transfer.
Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line and, when
configured network-wide, can be used across networks. A System Park
Extension can be configured to automatically park most calls.
36
While on an active call
To park a call on the System Park DN or your own DN:
During an active call, press the Park soft key
twice.
Note: By default, the call is parked on
your DN unless a System Park is
enabled to automatically park calls on
the system.
To park a call on a DN other than the System Park DN or your
own DN:
1. Press the Park soft key.
2. Dial the DN where you want to park the
call.
3. Press the Park soft key.
To retrieve a parked call:
1. Lift the handset.
2. Press the Park soft key.
37
While on an active call
3. Dial the DN where you parked the call.
Note: If a parked call is not retrieved
within a specified time period, it rings
back to your telephone or the attendant.
Recording a Calling Party Number
Use the Calling Party Number feature to record a caller’s number, or to
charge a call to an account number, during an established call.
To record a caller’s number for accounting purposes:
1. Press the Call Party soft key. The caller
is placed on hold.
2. Dial a charge account number or the
caller’s number.
Note: For information on using the
Charge key, see “Charging a call or
charging a forced call” on page 51.
3. Press the Call Party soft key to return to
the call.
Tracing a malicious call
Use the Call Trace feature to trace nuisance calls within your system.
Note: This is not a default feature. Contact your system administrator
to configure this feature on your telephone.
38
While on an active call
To activate Call Trace:
1. Choose one of the following:
— Press the Transfer soft key.
— Press the Conference soft key.
2. Dial the SPRE code followed by 83 or
enter the Call Trace FFC to
automatically reconnect.
Note: Contact your system administrator
for the Call Trace feature SPRE code.
39
While away from your desk
While away from your desk
Use the following features when you are away from your desk;
•
“Using Call Forward” on page 40
•
“Using Internal Call Forward” on page 41
•
“Using Remote Call Forward” on page 42
•
“Securing your telephone” on page 44
Using Call Forward
Use the Call Forward feature to direct incoming calls to ring on another
line (DN). If the telephone is in the process of ringing, that call cannot be
forwarded.
To forward your calls or change the forward number:
1. Press the Forward soft key.
2. Dial the DN where you want to forward
your calls.
3. Press the Forward soft key.
To deactivate Call Forward:
Press the Forward soft key.
40
While away from your desk
To reinstate Call Forward to the same number:
Press the Forward soft key twice.
Using Internal Call Forward
Use Internal Call Forward to accept only calls originating at internal DNs
to ring at another DN. Calls originating outside your telephone system still
ring at your telephone. Current incoming calls cannot be forwarded.
To activate Internal Call Forward:
1. Lift the handset and enter the Internal
Call Forward Activate FFC.
2. Dial the DN to which your internal calls
will be forwarded.
3. Hang-up.
To deactivate Internal Call Forward:
Lift the handset and enter the Internal
Call Forward Deactivate FFC.
41
While away from your desk
Using Remote Call Forward
Use Remote Call Forward (from any phone other than your own) to
forward your calls to any DN.
To activate Remote Call Forward:
1. Lift the handset.
2. If calling from a telephone outside the
system, dial your direct system access
number and wait for dial tone.
3. Dial the Remote Call Forward Activate
FFC to activate the feature.
4. Dial your Station Control Password. A
dial tone sounds.
5. Choose one of the following:
— Dial your DN.
— To forward calls to the previous
call forward telephone number,
press the # key. (Do not perform
steps 6 and 7).
6. Dial the number to which calls are being
forwarded. If calls are forwarded to an
invalid number, a fast busy signal
sounds.
42
While away from your desk
7. Press the # key.
To deactivate Remote Call Forward:
1. Lift the handset.
2. If calling from a telephone outside the
system, dial the direct system access
number and wait for the dial tone.
3. Dial the Remote Call Forward
Deactivate FFC.
4. Dial your Station Control Password.
5. After hearing the dial tone, dial your DN.
6. Press the # key.
43
While away from your desk
Securing your telephone
The Electronic Lock feature is controlled using your Station Control
Password. To change your Station Control Password, please refer to
“Security features” on page 14.
To lock your telephone:
1. Lift the handset.
2. Dial the Electronic Lock Activate FFC.
3. Dial your Station Control Password.
4. Choose one of the following:
— If dialing locally, press the Goodbye
key.
(Goodbye)
— If dialing the FFC remotely, dial your
DN.
To unlock your telephone:
1. Lift the handset.
2. Dial the Electronic Lock Deactivate
FFC.
44
While away from your desk
3. Dial your Station Control Password.
4. Choose one of the following:
— If dialing locally, press the Goodbye
key.
(Goodbye)
— If dialing the FFC remotely, dial your
DN.
45
Talking with more than one person
Talking with more than one
person
Use the following features to enable conversations between more than
two people:
•
“Setting up a conference call” on page 46
•
“Using Group Call” on page 47
Setting up a conference call
Use the Conference feature to set up a conference call. The maximum
number of people the conference feature supports is either three or six,
depending on the configuration of your telephone.
To set up a conference call:
1. While on a call, press the Conference
soft key to place the party on hold. You
receive dial tone.
2. Dial the number of the person you want
to add to the conference call. You can
talk privately to the person you are
adding at this time.
3. Press the Conference soft key a second
time to conference all parties together.
46
Talking with more than one person
If the person you attempt to add to the conference is unavailable:
1. Press the Goodbye key.
(Goodbye)
2. Press the Line (DN) key to return to your
original call.
(Line)
Using Group Call
Use the Group Call feature to automatically call members of a predefined
group, one at a time, until they all answer.
To call group members:
1. Lift the handset.
2. Enter the Group Call FFC.
— The feature automatically calls all
group members.
— The telephone numbers of the group
members display as they answer.
— When a person in your group is on a
conference call or another group
call, they are not connected to your
group call.
— After everyone in the group has
answered, only the person who
made the group call can put the call
on hold.
47
Talking with more than one person
To answer a Group Call:
Lift the handset.
Note: When you answer a Group Call, three 10-second tones notify
you that there is a group call on your extension.
To end a Group Call:
Press the Goodbye key.
(Goodbye)
48
Note: When the person who made the
group call disconnects, the call
terminates for all members of the group.
However, the members of the Group Call
can disconnect from the call and not
affect other members on the call.
Working without interruption
Working without interruption
This section describes the Activating Make Set Busy feature, which
provides uninterrupted work time.
Using Make Set Busy
Use the Make Set Busy feature to make your telephone appear busy to all
callers.
To activate Make Set Busy:
1. Lift the handset.
2. Enter the Make Set Busy Activate FFC.
To deactivate Make Set Busy:
1. Lift the handset.
2. Enter the Make Set Busy Deactivate
FFC.
49
Additional calling features
Additional calling features
The following calling features are available on some IP Phone 2001
phones. Contact your system administrator to find out if they are available
to you:
•
“Using Call Page Connect to make an announcement” on page 50
•
“Charging a call or charging a forced call” on page 51
•
“Using Enhanced Override” on page 54
•
“Using Forced Camp-on” on page 55
•
“Overriding a busy signal” on page 56
•
“Using Privacy Release” on page 56
•
“Using Radio Page” on page 57
Using Call Page Connect to make an
announcement
Use the Call Page Connect feature to make an announcement over a
paging system.
To use Call Page:
1. Lift the handset.
2. Dial the Page Trunk Access Code to
complete the connection to the page
system.
3. Make your announcement.
50
Additional calling features
4. Press the Goodbye key.
(Goodbye)
Charging a call or charging a forced call
Use the Call Charge feature to charge a call to a specific account. The
Forced Charge feature charges long-distance calls from a telephone
restricted to local calls.
To charge a call before you dial:
1. Lift the handset.
2. Choose one of the following:
— Press the Charge soft key.
— Dial the Call Detail Recording FFC.
3. Dial the charge account number.
4. When the dial tone sounds, dial the
number.
To charge a call in progress:
1. Choose one of the following:
or
— Press the Transfer soft key.
— Press the Conference soft key.
51
Additional calling features
2. Choose one of the following:
— Press the Charge soft key.
— Dial the Call Detail Recording FFC.
3. Dial the charge account number.
4. Press the Line (DN) key to return to the
call.
(Line)
To charge a call to an account when you transfer a call:
1. Press the Transfer soft key. The call is
placed on hold.
2. Dial the Call Detail Recording FFC.
3. Dial the charge account number.
4. After the dial tone, dial the number to
where the call is to be transferred.
52
Additional calling features
5. Press the Transfer soft key when you
hear the telephone ring.
Note: You can talk privately to the
person at the transfer number before you
press the Transfer key.
To charge a call to an account when you add someone to a
conference call:
1. Press the Conference soft key. The call
is placed on hold.
2. Dial the Call Detail Recording FFC.
3. Dial the charge account number.
4. Dial the number of the person you want
to add to the conference.
5. Press the Conference soft key.
53
Additional calling features
Using Enhanced Override
Use the Enhanced Override feature to override an active call after you
attempt a Forced Camp-on. Use Enhanced Override to make a simple
call or a consultation call, such as placing a call on hold and calling
another party.
To use Enhanced Override:
You receive a busy signal after dialing a
telephone number:
1. Enter the Override FFC to initiate a
Forced Camp-on.
— If either person on the call
disconnects at this time, you
receive an overflow (fast busy/
engaged) signal.
2. Enter the Override FFC again.
— The other two persons on the call
receive an override tone and a
conference call is established
between the three of you. If anyone
disconnects, the other two persons
remain connected.
To disconnect Enhanced Override:
Press the Goodbye key.
(Goodbye)
54
Additional calling features
Using Forced Camp-on
Use the Forced Camp-on feature to automatically ring another telephone
(internal or external) immediately after that telephone disconnects from its
current call.
To use Forced Camp-on:
You receive a busy signal after dialing a
telephone number.
1. Enter the Override FFC to initiate a
Forced Camp-on.
Note: The person you called receives a
tone. You receive a ring/ringback signal
or a busy/engaged signal, depending on
the options chosen. You are now
camped-on to the number you dialed.
2. Hang–up the telephone.
3. When the person you called finishes
their call, your telephone automatically
dials the number. Both telephones ring.
To answer a call camped-on to your extension:
When the telephone rings, lift the
handset.
Note: You can program your telephone
for either Camp-on or Call Waiting, but
not both.
55
Additional calling features
Overriding a busy signal
Use the Override feature to override a busy signal and interrupt another
call.
To override a busy/engaged signal:
You dial a telephone number and receive a
busy signal.
Enter the Override FFC.
The people in the targeted call receive a tone
for approximately one second. After the
Override feature joins you to their call, a
short tone repeats every 16 seconds.
To end the connection:
Press the Goodbye key.
(Goodbye)
Using Privacy Release
Use the Privacy Release feature to enable one or more people who share
your DN to join a call.
To use Privacy Release on an established call:
Press the Privacy Release soft key during a
call.
A person joins the call by pressing the
shared number (DN) key on their telephone
(Multiple Appearance DN feature).
56
Additional calling features
Using Radio Page
Use the Radio Page feature to page a person and stay on the line until
they answer. The paged person answers the call after entering a special
Page Meet–me code from any telephone.
To use Automatic Preselection (Meet–me page):
1. Lift the handset.
2. Dial the Radio Paging Access FFC.
The paging tone sounds (two beeps
followed by a dial tone).
3. Dial the number of the party you want to
page. After dialing, the ringback tone
sounds.
Note: The paged person can use any
telephone to enter a Radio Paging
Answer FFC, plus their own DN
number.
(Goodbye)
4. If your call goes unanswered for a preset
time period and a 15-second high
pitched tone sounds followed by silence,
press the Goodbye key or replace the
handset.
57
Additional calling features
To use Automatic Post selection:
The called party is either busy on the telephone or away from the desk.
To page the called party, there is no need to redial the number of the
called party.
1. Press the Radio Page soft key. A
special dial tone sounds.
2. Dial the Radio Paging Access FFC.
The ringback tone sounds.
Note: The paged person can use any
telephone to enter a Radio Paging
Answer FFC, plus their own DN
number.
(Goodbye)
3. If your call goes unanswered for a preset
time period and a 15-second highpitched tone sounds followed by silence,
press the Goodbye key or replace the
handset.
To answer a Radio Page:
If you carry a Radio Pager, a page indicates that someone dialed your
line (DN). If the Radio Page system is configured up to function in Meet–
me mode, you can answer the page call from any telephone.
1. Lift the handset.
2. Dial the Radio Page Answer FFC. The
paging tone sounds.
58
Additional calling features
3. Dial your own DN to connect to the
paging caller. If the caller has hung up,
a steady, high-pitched (Number
Unavailable) tone sounds.
59
Additional phone features
Additional phone features
The following phone features are available on some IP Phone 2001
phones. Contact your system administrator to find out if they are available
to you.
•
“Using Virtual Office” on page 60
•
“Using Media Gateway 1000B” on page 68
Using Virtual Office
When you are away from your office telephone, use the Virtual Office
feature to transfer calls and all of your telephone's features to a remote
telephone.
Note 1: Consult your system administrator to verify if the Virtual
Office feature is available for your use.
Note 2: When designated as the office telephone, the IP Phone 2001
can be activated for Virtual Office by the IP Phone 2002, IP Phone
2004, IP Softphone 2050, or another IP Phone 2001.
Note 3: When used as the remote telephone, the IP Phone 2001 can
activate only an IP Phone 2001 for Virtual Office.
This section provides more information on the following topics:
•
“Logging in to Virtual Office” on page 61
•
“Using Virtual Office on your remote telephone” on page 62
•
“Using Virtual Office on your office telephone” on page 64
•
“Logging out of Virtual Office” on page 65
•
“Troubleshooting Virtual Office” on page 66
60
Additional phone features
Logging in to Virtual Office
To activate Virtual Office on your office telephone from your
remote telephone:
1. Press the Services key.
2. Press the Navigation keys to scroll and
highlight Virtual Office Login.
3. Press the Select soft key.
4. Enter your User ID (for example, your
DN including the access code) at the
prompt.
Note: This must be an ESN number.
5. Press the Select soft key.
61
Additional phone features
6. At the prompt, enter the home Station
Control Password (SCPW).
Note 1: If the User ID is not found
locally, the message “Locating Remote
Server” displays.
Note 2: After three failed login attempts,
wait one hour before attempting to log in
again.
A successful login transfers all the
features, time, date, and tones to your
remote telephone from your office
telephone.
Using Virtual Office on your remote
telephone
Figures 5 to 8 illustrate IP Phones logged on to an IP Phone 2001 using
Virtual Office.
Figure 5: Logged on to an IP Phone 2001 using an
IP Phone 2001
62
Additional phone features
Figure 6: Logged on to an IP Phone 2001 using an
IP Phone 2002
Figure 7: Logged on to an IP Phone 2001 using an
IP Phone 2004
63
Additional phone features
Figure 8: Logged on to an IP Phone 2001 using an
IP Softphone 2050
On the displays of IP Phone 2002 and 2004, and IP Softphone 2050, the
feature keys remain empty (except for the appearance of your DN) as
your IP Phone 2001 does not support feature keys.
A User information line appears on all displays listing the number of your
office telephone.
Using Virtual Office on your office telephone
When activated for Virtual Office by a
remote telephone, your office telephone
is logged out and is no longer
operational.
A Logged Out message displays on your
telephone alerting you that your office
telephone is being used for
Virtual Office.
64
Additional phone features
To regain operation of a telephone being used for Virtual Office:
Choose one of the following:
1. To completely disconnect your office
telephone from the remote telephone:
or
a. Press the Home soft key.
b. Enter your User ID and password
(this logs the office telephone back
on to your office network).
2. To use your office telephone as the
remote telephone for Virtual Office,
press the Virtual soft key to log in to
another IP Phone.
Logging out of Virtual Office
To log out from a remote telephone:
1. Press the Services key.
(Services)
2. Press the Navigation keys to scroll and
highlight Virtual Office Logout.
3. Press the Select soft key.
65
Additional phone features
Troubleshooting Virtual Office
Virtual Office can display error messages on-screen. The following table
lists error messages and actions to correct the causes.
Table 1: Troubleshooting Virtual Office (Part 1 of 3)
Displayed Message
Probable Cause
Action
Busy, try again
Remote IP Phone is
active (not idle).
Wait for remote
telephone to become
idle and try again.
ACD IP Phone is
logged in.
Log out of ACD IP
Phone before
initiating Virtual
Office from another
IP Phone.
Make-Set-Busy is
inactive on ACD IP
Phone.
Configure Make-SetBusy active on ACD
IP Phone.
Incorrect User ID
entered.
Enter correct User ID.
User ID is not in
Gatekeeper
database.
Notify system
administrator.
Invalid ID (2)
Incorrect User ID
entered.
Enter correct User ID.
Invalid ID (3)
Incorrect User ID
entered.
Enter correct User ID.
User ID in
Gatekeeper database
points to originating
Call Server.
Notify system
administrator.
Invalid ID (1)
66
Additional phone features
Table 1: Troubleshooting Virtual Office (Part 2 of 3)
Displayed Message
Probable Cause
Action
Locked from Login
Three failed attempts
to enter the correct
Station Control
Password.
Wait one hour for the
lock to clear
automatically, or
notify system
administrator to clear
lock.
Permission Denied
(1)
Remote telephone
has no Station
Control Password.
Notify system
administrator.
Permission Denied
(3)
Incorrect User ID
entered.
Enter correct User ID.
Remote telephone
has no Station
Control Password.
Notify system
administrator.
Incorrect User ID
entered.
Enter correct User ID.
Attempt to log in to a
remote IP Phone
2002, IP Phone 2004,
or IP Softphone 2050
from an
IP Phone 2001
(some restrictions
apply).
Go to an IP Phone
2002, IP Phone 2004,
or IP Softphone 2050
and try to log in
again, or consult your
system administrator.
Incorrect User ID
entered.
Enter correct User ID.
Remote telephone
does not have VOUA
Class of Service.
Notify system
administrator.
Permission Denied
(4)
Permission Denied
(5)
67
Additional phone features
Table 1: Troubleshooting Virtual Office (Part 3 of 3)
Displayed Message
Probable Cause
Action
Permission Denied
(6)
Incorrect User ID
entered.
Enter correct User ID.
Incorrect Station
Control Password
entered.
Select Retry, and try
again with the correct
Station Control
Password.
Server Unreachable
(1)
Network problem.
Notify system
administrator if
problem persists.
Server Unreachable
(2)
Network problem.
Notify system
administrator if
problem persists.
Using Media Gateway 1000B
This section provides more information on the following topics:
•
“Using Test Local Mode” on page 69
•
“Using Resume Normal Mode” on page 69
•
“Troubleshooting MG 1000B” on page 70
The Media Gateway 1000B (MG 1000B) telephone can operate in Normal
or Local Mode.
Normal Mode
The telephone registers with the Main Office and receives telephone
services from the Main Office. At any time during Normal Mode, you can
check local mode functionality (make and receive calls) by enabling Local
Mode and returning to Normal Mode. After testing, you can return to
Normal Mode by using the Resume Normal Mode command or by
waiting for 10 minutes.
68
Additional phone features
Local Mode
If the WAN connection goes down, the telephone loses communication
with the Main Office TPS. It then registers with the MG 1000B and
receives telephone services from the branch office. When in Local Mode,
the telephone displays “LOCAL MODE.”
Using Test Local Mode
Use Test Local Mode to check local mode functionality (make and receive
telephone calls). This is useful when provisioning has changed for an
IP Phone on an MG 1000B Controller.
1. Press the Services key.
(Services)
2. Press the Navigation keys to scroll and
highlight Test Local Mode.
3. Press the Select soft key (the telephone
resets and registers to the MG 1000B).
Using Resume Normal Mode
Use the Resume Normal Mode command to return to Normal Mode after
testing survival functionality.
Note: If the Resume Normal Mode command is not performed after
testing, the telephone automatically returns to Normal Mode in ten
minutes.
1. Press the Services key to access the
Services menu.
(Services)
69
Additional phone features
2. Using the Navigation keys, highlight
Resume Normal Mode.
3. Press the Select key (the telephone
registers back to the Main Office).
Troubleshooting MG 1000B
MG 1000B can display error messages on-screen. The following table
lists error messages and actions to correct the causes.
Table 2: Troubleshooting MG 1000B
Display Message
Probable Cause
Action
Local Mode
Test Local mode.
Press the Services
key, and then select
Resume Normal
Mode.
Network problem.
Contact system
administrator if
problem persists.
Gatekeeper unable to
find endpoint from
Branch User ID.
Notify system
administrator.
Branch User ID not
found in any
equipped Terminal
Number (TN).
Notify system
administrator.
Local Mode
Invalid ID (1)
Local Mode
Invalid ID (2)
70
Using Hospitality features
Using Hospitality features
Use the following Hospitality features for hotel operations.
Configuring Automatic Wake-Up
Use the Automatic Wake-Up feature to receive a timed reminder call.
From your telephone, you can program the system to automatically place
a call to yourself at a predetermined time. When you answer the call,
recorded music plays for up to 30 seconds, followed by a prerecorded
announcement or the attendant.
To enter the time for an Automatic Wake-Up call:
1. Lift the handset.
2. Dial the Automatic Wake-Up Request
FFC.
3. Dial the Automatic Wake-Up time in a
24-hour time format (hhmm). A tone
sounds to confirm the time.
Note: In a 24-hour time format, 7:30
a.m. is entered as 0730; 9:45 p.m. is
entered as 2145.
4. Press the Goodbye key.
(Goodbye)
71
Using Hospitality features
To quit an Automatic Wake-Up call:
1. Lift the handset.
2. Dial the Automatic Wake-Up Quit FFC.
3. Press the Goodbye key.
(Goodbye)
To verify the time for the Automatic Wake-Up call:
1. Lift the handset.
2. Dial the Automatic Wake-Up Verify
FFC.
3. Dial the Automatic Wake-Up time in
a 24-hour time format (hhmm). If your
query matches the preset time, a
confirmation tone sounds.
Note: In a 24-hour time format, 7:30
a.m. is entered as 0730; 9:45 p.m. is
entered as 2145.
4. Press the Goodbye key.
(Goodbye)
72
Using External Server Applications
Using External Server Applications
Use External Server Applications to access a variety of applications
directly from your IP Phone 2001. For more information about the
External Server Applications, consult the Nortel IP Phone External Server
Applications User Guide.
73
Flexible Feature Codes (FFCs)
Flexible Feature Codes (FFCs)
Use this table to keep track of the FFCs assigned by your system
administrator.
Table 3: FFCs
FFC
74
Feature
FFC
Feature
Automatic Wake-Up
Activate
Malicious Call Trace
Automatic Wake-Up
Deactivate
Pickup Ringing Number
Automatic Wake-Up Verify
Remote Call Forward
Activate
Call Detail Recording
Charge Account
Remote Call Forward
Deactivate
Electronic Lock Activate
Radio Paging Access
Electronic Lock Deactivate
Radio Paging Answer
Group Call
Station Control Password
Change
Internal Call Forward
Activate
Virtual Office Terminal
Log On
Internal Call Forward
Deactivate
Virtual Office Terminal
Log Off
Terms you should know
Terms you should know
Attendant
A telephone operator in your organization.
Calling Party Name Display
Information appearing on the LCD display screen such as the
caller’s name and telephone number. The system must have
CPND enabled.
Category 5 (Cat5)
Balanced 100 Ohm cable and associated connecting hardware
whose transmission characteristics are specified up to 100 MHz.
It is used by 10BaseT, 100BaseT4, and 100BaseTX installations.
The cable normally has four pairs of copper wire. Category 5 is
the most popular cable used in new installations today.
Communication Server 1000
Your office communication system.
Date/time display
The current date and time when the telephone is in an idle state.
Directory Number (DN)
A number consisting of one to seven digits for a telephone. Also
known as an extension number.
Fastbusy
A signal given to indicate that all outgoing lines are busy or an
error condition exists (for example, a misdialed number).
Feature display
An area that shows status information about the feature in use. It
also displays the name and status of the active session.
75
Terms you should know
Fixed key
The hard-labeled keys on your telephone.
Flexible Feature Codes (FFCs)
Specialized codes entered using the dialpad that enable features
(for example, Ring Again).
Goodbye key
A fixed key used to end an active call.
Indicator
An LCD or an LED that indicates the status of a feature by the
flash, wink, steady on, or off.
Information display
Any display of call activity, lists, prompts, and status of calls. On
the IP Phone 2001 this information area is a one-line by 24characters. If the text message exceeds this area, a scroll arrow
icon indicates that you must use the scroll keys to view the
remaining text.
Information line
A one-line by 24-character area which displays date and time or
application information.
Interrupted dial tone
A broken or pulsed dial tone, heard when you access some
features on your telephone.
Message (Inbox)
A fixed key on the IP Phone 2001 that connects to your voice
messaging system when the key is pressed.
76
Terms you should know
Message waiting indicator/Incoming call indicator
An LCD or an LED that indicates the status of a feature by the
flash, wink, steady on, or off.
Navigation keys
Keys used to scroll through menus and lists appearing on the
LCD display screen.
Off-hook
Any line selected to make a call or receive an incoming call.
The term off-hook is applied whether (a) the end-user lifts up the
handset, (b) the end-user presses a line key, (c) the call is
automatically answered at the telephone, or (d) a line is
automatically selected for an outgoing call.
Paging tone
A special tone heard when using the Radio Paging feature. You
hear two beeps followed by dial tone.
Ringback/ring tone
A sound indicating that a call you have made is ringing at its
destination.
Services key
A fixed key used to access options such as Telephone Options,
Password Admin, Virtual Office Login, Virtual Office Logout, Test
Local Mode, and Resume Normal Mode.
Shared Directory Number
A DN (extension) that is shared by two or more persons.
Special Prefix code (SPRE)
Special codes entered using the dialpad, followed by a two-digit
access code, that enable features (for example, Call Forward All
Calls requires entry of SPRE code + 74).
77
Terms you should know
Soft keys (self-labeled)
A set of keys programmed by your system administrator. These
four keys located directly below the display area have four
programmable layers. These keys are also used to configure
parameters in the Telephone Option menu.
Special dial tone
The three consecutive tones followed by dial tone that you hear
when accessing telephone features.
Station Control Password (SCPW)
Enables security features on your phone to prevent others from
making calls from your telephone and to prevent access to
protected features (for example, Remote Call Forward).
Status Messages
A message displayed to inform the user of important information.
A right arrow appears if more than one Status Message is
present. Examples of Status Messages include: Message
Waiting, All Lines Forwarded to: 6453, Do Not Disturb On, Ring
Again active, and Ringer is OFF.
System or Switch
Your office communication system.
Switchhook
A button that the handset presses down, disconnecting your call
when you replace the handset. The handset (when lifted)
releases the switchhook and you either answer an incoming call
or you receive a dial tone to make a call.
User Interface
Screen displays that interact with the end-user as a result of an
action or event.
78
Terms you should know
Volume control bar
A rocker bar you press to increase or decrease the volume of the
ringer, handset, headset, and the speaker.
79
Terms you should know
80
Index
Index
A
Enhanced Override 54
About the IP Phone 2001 9
External server applications 73
Answer a call 33
Attendant 75
F
Automatic Wake-Up 71
Fastbusy 75
Feature display 75
B
Fixed key 76
Basic features 9
Flexible Feature Code (FFC) 41,
42, 43, 47, 54, 76
C
Flexible Feature Codes (FFCs) 74
Call features and Flexible Feature
Codes 14
Forced Camp-on 55
Call Forward 40
Forward key 40
Call Page 50
G
Call Page Connect 50
Goodbye key 11, 76
Call Park 36
Group Call 47
Call party information 75
Calling Party Number 38
H
Charge a call or charge a forced
call 51
Hold 34
Conference call 46
Hospitality features 71
Contrast adjustment 21
Hold key 11
I
D
Indicator status 76, 77
Date/time display 75
Information display 76
Date/Time format 22
Information line 76
Direct system access 43
Internal Call Forward 41
Directory Number 75
Interrupted dial tone 76
DN 75
L
E
Language selection 21
Electronic Lock 44
Last Number Redial 30
81
Index
Line key 10
S
Local DialPad Tone 23
Secure your telephone 44
M
Services key 11, 77
Services menu 18
Make Set Busy 49
Shared Directory Numbers 77
Malicious call trace 38
Soft keys (self-labeled) 12, 78
Media Gateway 1000B 68
Special dial tone 78
Meet-me page 57
Special Prefix code (SPRE) 77
Message key 11, 76
Speed Call 31
Message waiting indicator 12, 77
Speed Call, System 32
N
Station Control Password 43
Navigation keys 11, 77
O
Station Control Password (SCPW)
78
Status Messages 78
Switchhook 78
Off-hook 77
System or Switch 78
Off-hook dialing 26
System Speed Call 32
On-hook dialing 27
Override 54
T
Override a busy signal 56
Telephone controls 10
P
Telephone display 13
Telephone information 24
Page Meet-me code 57
Timed Reminder Recall 35
Paging tone 77
Transfer a call 34
Predial feature 27
Privacy Release 56
R
U
User Interface 78
Radio Page 57
V
Record a Calling Party Number 38
Virtual Office 60
Remote Call Forward 42
Virtual Office login 61
Ring Again 29
Virtual Office logout 65
Ring type 23
Virtual Office on your office telephone 64
Ringback/ring tone 55, 77
82
Index
Virtual Office on your remote telephone 62
Volume adjustment 20
Volume control bar 10
83
Index
84
Nortel Communication Server 1000
IP Phone 2001
User Guide
Copyright © Nortel Networks Limited 2005
All Rights Reserved
Information is subject to change without notice. Nortel Networks reserves
the right to make changes in design or components as progress in
engineering and manufacturing may warrant.
Nortel, Nortel (Logo), the Globemark, This is the Way, This is Nortel
(Design mark), SL-1, Meridian 1, and Succession are trademarks of
Nortel Networks.
Document Number: NN-10300-048
Document Release: Standard 4.00
Date: August 2005
Produced in Canada
Internet address
http://www.nortel.com
Download PDF

advertising