Epson 475Wi Projector User Manual

Start Here
Install the Software
®
EPSON Perfection 4870 Pro
Wait! You must install your software before connecting the scanner to
your computer. The installation process may take several minutes. Be sure
to close all open programs and turn off any virus protection programs.
Unpack Your Scanner
4047109-00 XXX
1
The software works with Windows® 98, Me, 2000, and XP, and Macintosh® OS 8.6
to 9.x and OS X 10.2.x. Follow the steps below (for Windows), or the steps in the
next column (for Macintosh).
Make sure you have all the parts shown below for your EPSON® scanner:
Scanner cover/
transparency unit
CD-ROM with EPSON Scan
driver, software, and
electronic manuals
®
Adobe Photoshop
Elements 2.0 CD-ROM
LaserSoft® SilverFast®
CD-ROM
ArcSoft® Software Suite
CD-ROM
MonacoEZcolor™
CD-ROM
Then follow the instructions in section 3 to connect the scanner.
8
At the end of the installation, click Exit.
Macintosh
9
Register your scanner when prompted, then remove the CD-ROM.
Note: EPSON Scan does not support the UNIX® File System (UFS) for
Mac® OS X. You must install the software on a disk or in a partition that
does not have UFS.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Windows
1
1
®
Follow the on-screen instructions to install the software. If you are prompted
to restart, click Quit.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
Document mat
7
Note: If you don’t already have Adobe Photoshop or Photoshop Elements on
your computer, install Photoshop Elements from the CD-ROM included with
your scanner.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Scanner
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or DVD
drive. The installer starts automatically. At the first screen, click Next.
Then follow the instructions in section 3 to connect the scanner.
Connect the Scanner
Photoshop Elements
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive.
2
Double-click the
English folder.
3
Double-click the Install Photoshop Elements icon.
4
Follow the on-screen instructions to begin installation, and accept the
software license conditions. In Mac OS X, enter your administrator name and
password, then click OK.
or
CD-ROM icon and double-click the
2
Make sure US English is selected and click Next.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
5
When you’re asked for a serial number, enter the number printed on the
sticker attached to the CD-ROM sleeve.
4
When you see this screen, click the Adobe Photoshop Elements button.
6
When you see this screen, click the Install button.
After your software is installed, it’s time to connect your scanner.
1
Remove the sticker from the transportation lock. Use a coin to turn the lock
clockwise one-quarter turn to unlock the scanner carriage.
2
Remove the sticker from the back of the scanner.
Film holders
Click Adobe Photoshop
Elements
USB cable
®
Remove
sticker
™
Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire or iLink ),
you’ll need to purchase an IEEE 1394 cable (not included).
2
Remove all the packing tape, but leave the large stickers in place until you
are instructed to remove them.
5
IMPORTANT!
Leave the sticker
in place until you
are instructed to
remove it
3
4
5
Insert the hinges on the cover into the square
holes at the back of the scanner.
Follow the on-screen instructions to install the software.
Follow the on-screen instructions. When you’re asked for a serial number,
enter the number printed on the sticker attached to the CD-ROM sleeve.
8
When you’re finished, click Quit.
If you don’t have Acrobat Reader,® eject the CD-ROM and repeat
steps 1 to 3. Then select Adobe Acrobat Reader to install it.
9
If you don’t have Acrobat Reader, you can install it from the CD-ROM.
Open the Adobe Acrobat Reader folder. Then double-click the Reader
Installer icon to install it.
3
Connect the cable for the built-in transparency unit (scanner cover). Make
sure the notch and arrow on the connector are facing up.
4
Connect either the USB cable that came with the scanner or an optional
IEEE 1394 (FireWire) cable. Do not connect both cables.
Remove the CD-ROM and install the scanner software as described below.
Remove the CD-ROM and continue with the following instructions to install
the scanner software.
Scanner Software
1
Remove the sticker, then slide the
transportation lock to the unlocked position.
Attach the document mat. Hold the top of the
document mat and slide it down gently along
the document cover. Make sure the tabs on
the bottom and sides of the document mat fit
in the slots on the document cover.
7
Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The
installer starts automatically. If it doesn’t start, do the following:
•
Windows XP: Click Start, click My Computer, then double-click the
EPSON CD-ROM icon.
•
Windows 98, Me, and 2000: Double-click
double-click the EPSON CD-ROM icon.
My Computer, then
2
At the language selection screen, select your preferred language.
3
When you see the antivirus software message, click Continue.
4
Read the license agreement, then click Agree to continue.
5
At the Software Installation screen, click Install. The software installs
automatically.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
Double-click the
EPSON CD-ROM icon, if necessary.
2
Double-click the EPSON icon.
3
At the language selection screen, select your preferred language.
4
When you see the antivirus software message, click Continue.
5
Read the license agreement, then click Agree to continue.
6
At the Software Installation screen, click Install. Enter your administrator
name and password, if necessary.
If you’re using USB
Plug the square end of the USB cable into the scanner’s USB port. Then
plug the flat end into any available USB port on your computer or hub.
Note: Your scanner may not work correctly if you use a USB cable other
than the one supplied by EPSON or if you connect your scanner through
more than one hub.
Click Install
Click Install
6
Close the cover.
6
At the end of the installation, click Exit.
7
Register your scanner when prompted, then remove the CD-ROM.
Note: If you’re installing on Macintosh OS 8.6 to 9.x, you may see a prompt
to update your Carbon Library. After the CarbonLib installation is complete
and you’ve restarted your system, double-click the
EPSON icon, then
follow the steps above to continue the installation.
Turn over
Start Here
Install the Software
®
EPSON Perfection 4870 Pro
Wait! You must install your software before connecting the scanner to
your computer. The installation process may take several minutes. Be sure
to close all open programs and turn off any virus protection programs.
Unpack Your Scanner
4047109-00 XXX
1
The software works with Windows® 98, Me, 2000, and XP, and Macintosh® OS 8.6
to 9.x and OS X 10.2.x. Follow the steps below (for Windows), or the steps in the
next column (for Macintosh).
Make sure you have all the parts shown below for your EPSON® scanner:
Scanner cover/
transparency unit
CD-ROM with EPSON Scan
driver, software, and
electronic manuals
®
Adobe Photoshop
Elements 2.0 CD-ROM
LaserSoft® SilverFast®
CD-ROM
ArcSoft® Software Suite
CD-ROM
MonacoEZcolor™
CD-ROM
Then follow the instructions in section 3 to connect the scanner.
8
At the end of the installation, click Exit.
Macintosh
9
Register your scanner when prompted, then remove the CD-ROM.
Note: EPSON Scan does not support the UNIX® File System (UFS) for
Mac® OS X. You must install the software on a disk or in a partition that
does not have UFS.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Windows
1
1
®
Follow the on-screen instructions to install the software. If you are prompted
to restart, click Quit.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
Document mat
7
Note: If you don’t already have Adobe Photoshop or Photoshop Elements on
your computer, install Photoshop Elements from the CD-ROM included with
your scanner.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Scanner
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or DVD
drive. The installer starts automatically. At the first screen, click Next.
Then follow the instructions in section 3 to connect the scanner.
Connect the Scanner
Photoshop Elements
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive.
2
Double-click the
English folder.
3
Double-click the Install Photoshop Elements icon.
4
Follow the on-screen instructions to begin installation, and accept the
software license conditions. In Mac OS X, enter your administrator name and
password, then click OK.
or
CD-ROM icon and double-click the
2
Make sure US English is selected and click Next.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
5
When you’re asked for a serial number, enter the number printed on the
sticker attached to the CD-ROM sleeve.
4
When you see this screen, click the Adobe Photoshop Elements button.
6
When you see this screen, click the Install button.
After your software is installed, it’s time to connect your scanner.
1
Remove the sticker from the transportation lock. Use a coin to turn the lock
clockwise one-quarter turn to unlock the scanner carriage.
2
Remove the sticker from the back of the scanner.
Film holders
Click Adobe Photoshop
Elements
USB cable
®
Remove
sticker
™
Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire or iLink ),
you’ll need to purchase an IEEE 1394 cable (not included).
2
Remove all the packing tape, but leave the large stickers in place until you
are instructed to remove them.
5
IMPORTANT!
Leave the sticker
in place until you
are instructed to
remove it
3
4
5
Insert the hinges on the cover into the square
holes at the back of the scanner.
Follow the on-screen instructions to install the software.
Follow the on-screen instructions. When you’re asked for a serial number,
enter the number printed on the sticker attached to the CD-ROM sleeve.
8
When you’re finished, click Quit.
If you don’t have Acrobat Reader,® eject the CD-ROM and repeat
steps 1 to 3. Then select Adobe Acrobat Reader to install it.
9
If you don’t have Acrobat Reader, you can install it from the CD-ROM.
Open the Adobe Acrobat Reader folder. Then double-click the Reader
Installer icon to install it.
3
Connect the cable for the built-in transparency unit (scanner cover). Make
sure the notch and arrow on the connector are facing up.
4
Connect either the USB cable that came with the scanner or an optional
IEEE 1394 (FireWire) cable. Do not connect both cables.
Remove the CD-ROM and install the scanner software as described below.
Remove the CD-ROM and continue with the following instructions to install
the scanner software.
Scanner Software
1
Remove the sticker, then slide the
transportation lock to the unlocked position.
Attach the document mat. Hold the top of the
document mat and slide it down gently along
the document cover. Make sure the tabs on
the bottom and sides of the document mat fit
in the slots on the document cover.
7
Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The
installer starts automatically. If it doesn’t start, do the following:
•
Windows XP: Click Start, click My Computer, then double-click the
EPSON CD-ROM icon.
•
Windows 98, Me, and 2000: Double-click
double-click the EPSON CD-ROM icon.
My Computer, then
2
At the language selection screen, select your preferred language.
3
When you see the antivirus software message, click Continue.
4
Read the license agreement, then click Agree to continue.
5
At the Software Installation screen, click Install. The software installs
automatically.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
Double-click the
EPSON CD-ROM icon, if necessary.
2
Double-click the EPSON icon.
3
At the language selection screen, select your preferred language.
4
When you see the antivirus software message, click Continue.
5
Read the license agreement, then click Agree to continue.
6
At the Software Installation screen, click Install. Enter your administrator
name and password, if necessary.
If you’re using USB
Plug the square end of the USB cable into the scanner’s USB port. Then
plug the flat end into any available USB port on your computer or hub.
Note: Your scanner may not work correctly if you use a USB cable other
than the one supplied by EPSON or if you connect your scanner through
more than one hub.
Click Install
Click Install
6
Close the cover.
6
At the end of the installation, click Exit.
7
Register your scanner when prompted, then remove the CD-ROM.
Note: If you’re installing on Macintosh OS 8.6 to 9.x, you may see a prompt
to update your Carbon Library. After the CarbonLib installation is complete
and you’ve restarted your system, double-click the
EPSON icon, then
follow the steps above to continue the installation.
Turn over
Start Here
Install the Software
®
EPSON Perfection 4870 Pro
Wait! You must install your software before connecting the scanner to
your computer. The installation process may take several minutes. Be sure
to close all open programs and turn off any virus protection programs.
Unpack Your Scanner
4047109-00 XXX
1
The software works with Windows® 98, Me, 2000, and XP, and Macintosh® OS 8.6
to 9.x and OS X 10.2.x. Follow the steps below (for Windows), or the steps in the
next column (for Macintosh).
Make sure you have all the parts shown below for your EPSON® scanner:
Scanner cover/
transparency unit
CD-ROM with EPSON Scan
driver, software, and
electronic manuals
®
Adobe Photoshop
Elements 2.0 CD-ROM
LaserSoft® SilverFast®
CD-ROM
ArcSoft® Software Suite
CD-ROM
MonacoEZcolor™
CD-ROM
Then follow the instructions in section 3 to connect the scanner.
8
At the end of the installation, click Exit.
Macintosh
9
Register your scanner when prompted, then remove the CD-ROM.
Note: EPSON Scan does not support the UNIX® File System (UFS) for
Mac® OS X. You must install the software on a disk or in a partition that
does not have UFS.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Windows
1
1
®
Follow the on-screen instructions to install the software. If you are prompted
to restart, click Quit.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
Document mat
7
Note: If you don’t already have Adobe Photoshop or Photoshop Elements on
your computer, install Photoshop Elements from the CD-ROM included with
your scanner.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Scanner
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or DVD
drive. The installer starts automatically. At the first screen, click Next.
Then follow the instructions in section 3 to connect the scanner.
Connect the Scanner
Photoshop Elements
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive.
2
Double-click the
English folder.
3
Double-click the Install Photoshop Elements icon.
4
Follow the on-screen instructions to begin installation, and accept the
software license conditions. In Mac OS X, enter your administrator name and
password, then click OK.
or
CD-ROM icon and double-click the
2
Make sure US English is selected and click Next.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
5
When you’re asked for a serial number, enter the number printed on the
sticker attached to the CD-ROM sleeve.
4
When you see this screen, click the Adobe Photoshop Elements button.
6
When you see this screen, click the Install button.
After your software is installed, it’s time to connect your scanner.
1
Remove the sticker from the transportation lock. Use a coin to turn the lock
clockwise one-quarter turn to unlock the scanner carriage.
2
Remove the sticker from the back of the scanner.
Film holders
Click Adobe Photoshop
Elements
USB cable
®
Remove
sticker
™
Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire or iLink ),
you’ll need to purchase an IEEE 1394 cable (not included).
2
Remove all the packing tape, but leave the large stickers in place until you
are instructed to remove them.
5
IMPORTANT!
Leave the sticker
in place until you
are instructed to
remove it
3
4
5
Insert the hinges on the cover into the square
holes at the back of the scanner.
Follow the on-screen instructions to install the software.
Follow the on-screen instructions. When you’re asked for a serial number,
enter the number printed on the sticker attached to the CD-ROM sleeve.
8
When you’re finished, click Quit.
If you don’t have Acrobat Reader,® eject the CD-ROM and repeat
steps 1 to 3. Then select Adobe Acrobat Reader to install it.
9
If you don’t have Acrobat Reader, you can install it from the CD-ROM.
Open the Adobe Acrobat Reader folder. Then double-click the Reader
Installer icon to install it.
3
Connect the cable for the built-in transparency unit (scanner cover). Make
sure the notch and arrow on the connector are facing up.
4
Connect either the USB cable that came with the scanner or an optional
IEEE 1394 (FireWire) cable. Do not connect both cables.
Remove the CD-ROM and install the scanner software as described below.
Remove the CD-ROM and continue with the following instructions to install
the scanner software.
Scanner Software
1
Remove the sticker, then slide the
transportation lock to the unlocked position.
Attach the document mat. Hold the top of the
document mat and slide it down gently along
the document cover. Make sure the tabs on
the bottom and sides of the document mat fit
in the slots on the document cover.
7
Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The
installer starts automatically. If it doesn’t start, do the following:
•
Windows XP: Click Start, click My Computer, then double-click the
EPSON CD-ROM icon.
•
Windows 98, Me, and 2000: Double-click
double-click the EPSON CD-ROM icon.
My Computer, then
2
At the language selection screen, select your preferred language.
3
When you see the antivirus software message, click Continue.
4
Read the license agreement, then click Agree to continue.
5
At the Software Installation screen, click Install. The software installs
automatically.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
Double-click the
EPSON CD-ROM icon, if necessary.
2
Double-click the EPSON icon.
3
At the language selection screen, select your preferred language.
4
When you see the antivirus software message, click Continue.
5
Read the license agreement, then click Agree to continue.
6
At the Software Installation screen, click Install. Enter your administrator
name and password, if necessary.
If you’re using USB
Plug the square end of the USB cable into the scanner’s USB port. Then
plug the flat end into any available USB port on your computer or hub.
Note: Your scanner may not work correctly if you use a USB cable other
than the one supplied by EPSON or if you connect your scanner through
more than one hub.
Click Install
Click Install
6
Close the cover.
6
At the end of the installation, click Exit.
7
Register your scanner when prompted, then remove the CD-ROM.
Note: If you’re installing on Macintosh OS 8.6 to 9.x, you may see a prompt
to update your Carbon Library. After the CarbonLib installation is complete
and you’ve restarted your system, double-click the
EPSON icon, then
follow the steps above to continue the installation.
Turn over
Start Here
Install the Software
®
EPSON Perfection 4870 Pro
Wait! You must install your software before connecting the scanner to
your computer. The installation process may take several minutes. Be sure
to close all open programs and turn off any virus protection programs.
Unpack Your Scanner
4047109-00 XXX
1
The software works with Windows® 98, Me, 2000, and XP, and Macintosh® OS 8.6
to 9.x and OS X 10.2.x. Follow the steps below (for Windows), or the steps in the
next column (for Macintosh).
Make sure you have all the parts shown below for your EPSON® scanner:
Scanner cover/
transparency unit
CD-ROM with EPSON Scan
driver, software, and
electronic manuals
®
Adobe Photoshop
Elements 2.0 CD-ROM
LaserSoft® SilverFast®
CD-ROM
ArcSoft® Software Suite
CD-ROM
MonacoEZcolor™
CD-ROM
Then follow the instructions in section 3 to connect the scanner.
8
At the end of the installation, click Exit.
Macintosh
9
Register your scanner when prompted, then remove the CD-ROM.
Note: EPSON Scan does not support the UNIX® File System (UFS) for
Mac® OS X. You must install the software on a disk or in a partition that
does not have UFS.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Windows
1
1
®
Follow the on-screen instructions to install the software. If you are prompted
to restart, click Quit.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
Document mat
7
Note: If you don’t already have Adobe Photoshop or Photoshop Elements on
your computer, install Photoshop Elements from the CD-ROM included with
your scanner.
First you’ll install Adobe Photoshop Elements, then your scanner software.
Scanner
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite,
following the instructions included with each program.
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or DVD
drive. The installer starts automatically. At the first screen, click Next.
Then follow the instructions in section 3 to connect the scanner.
Connect the Scanner
Photoshop Elements
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive.
2
Double-click the
English folder.
3
Double-click the Install Photoshop Elements icon.
4
Follow the on-screen instructions to begin installation, and accept the
software license conditions. In Mac OS X, enter your administrator name and
password, then click OK.
or
CD-ROM icon and double-click the
2
Make sure US English is selected and click Next.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
5
When you’re asked for a serial number, enter the number printed on the
sticker attached to the CD-ROM sleeve.
4
When you see this screen, click the Adobe Photoshop Elements button.
6
When you see this screen, click the Install button.
After your software is installed, it’s time to connect your scanner.
1
Remove the sticker from the transportation lock. Use a coin to turn the lock
clockwise one-quarter turn to unlock the scanner carriage.
2
Remove the sticker from the back of the scanner.
Film holders
Click Adobe Photoshop
Elements
USB cable
®
Remove
sticker
™
Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire or iLink ),
you’ll need to purchase an IEEE 1394 cable (not included).
2
Remove all the packing tape, but leave the large stickers in place until you
are instructed to remove them.
5
IMPORTANT!
Leave the sticker
in place until you
are instructed to
remove it
3
4
5
Insert the hinges on the cover into the square
holes at the back of the scanner.
Follow the on-screen instructions to install the software.
Follow the on-screen instructions. When you’re asked for a serial number,
enter the number printed on the sticker attached to the CD-ROM sleeve.
8
When you’re finished, click Quit.
If you don’t have Acrobat Reader,® eject the CD-ROM and repeat
steps 1 to 3. Then select Adobe Acrobat Reader to install it.
9
If you don’t have Acrobat Reader, you can install it from the CD-ROM.
Open the Adobe Acrobat Reader folder. Then double-click the Reader
Installer icon to install it.
3
Connect the cable for the built-in transparency unit (scanner cover). Make
sure the notch and arrow on the connector are facing up.
4
Connect either the USB cable that came with the scanner or an optional
IEEE 1394 (FireWire) cable. Do not connect both cables.
Remove the CD-ROM and install the scanner software as described below.
Remove the CD-ROM and continue with the following instructions to install
the scanner software.
Scanner Software
1
Remove the sticker, then slide the
transportation lock to the unlocked position.
Attach the document mat. Hold the top of the
document mat and slide it down gently along
the document cover. Make sure the tabs on
the bottom and sides of the document mat fit
in the slots on the document cover.
7
Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The
installer starts automatically. If it doesn’t start, do the following:
•
Windows XP: Click Start, click My Computer, then double-click the
EPSON CD-ROM icon.
•
Windows 98, Me, and 2000: Double-click
double-click the EPSON CD-ROM icon.
My Computer, then
2
At the language selection screen, select your preferred language.
3
When you see the antivirus software message, click Continue.
4
Read the license agreement, then click Agree to continue.
5
At the Software Installation screen, click Install. The software installs
automatically.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
Double-click the
EPSON CD-ROM icon, if necessary.
2
Double-click the EPSON icon.
3
At the language selection screen, select your preferred language.
4
When you see the antivirus software message, click Continue.
5
Read the license agreement, then click Agree to continue.
6
At the Software Installation screen, click Install. Enter your administrator
name and password, if necessary.
If you’re using USB
Plug the square end of the USB cable into the scanner’s USB port. Then
plug the flat end into any available USB port on your computer or hub.
Note: Your scanner may not work correctly if you use a USB cable other
than the one supplied by EPSON or if you connect your scanner through
more than one hub.
Click Install
Click Install
6
Close the cover.
6
At the end of the installation, click Exit.
7
Register your scanner when prompted, then remove the CD-ROM.
Note: If you’re installing on Macintosh OS 8.6 to 9.x, you may see a prompt
to update your Carbon Library. After the CarbonLib installation is complete
and you’ve restarted your system, double-click the
EPSON icon, then
follow the steps above to continue the installation.
Turn over
If you’re using IEEE 1394 (FireWire)
Plug one end of the IEEE 1394 cable (not included) into the scanner’s
IEEE 1394 port. Then plug the other end into the IEEE 1394 (FireWire or
iLink) port on your computer.
Managing Color Data
More Scanning Options
Questions?
Here are more ways to get the most out of your scanner and software:
Here’s where to look for answers:
•
•
Quick Guide
Use the SilverFast Ai Job Manager for high-capacity batch scanning.
Organize all your photos into albums which you can easily archive to CD or
display in slideshows using ArcSoft PhotoBase.™
See your Quick Guide for instructions on using DIGITAL ICE Technology,
scanning film and text, and basic troubleshooting.
On-Screen Reference Guide
You can use MonacoEZcolor™ and your device software to provide accurate color
data among all your computer input and output devices such as your scanner,
monitor, digital camera, and printer. Here are the basic steps you need to take to
manage color for scans that you will print. See your MonacoEZcolor online
guides for detailed instructions.
5
6
1
Plug the scanner’s power cord into an electrical outlet.
Double-click the Perfection 4870 Reference Guide icon on your desktop.
If you didn’t install it, insert the scanner software CD-ROM in the CD-ROM or
DVD drive. At the Custom Installation screen, select Scanner Reference Guide
only, then click Install. You must have Microsoft® Internet Explorer, Netscape®
Navigator (versions 5.0 or later), or Apple® Safari™ (version 1.0 or later) to
read the Reference Guide.
First you need to use the Create Printer Profile option in MonacoEZcolor to
create profiles for your scanner and printer.
On-Screen Help for EPSON Scan
You must create profiles for each type of print media and settings.
Make sure the cover is closed, then press the P power button on the front of
the scanner to turn it on.
Print an RGB Target with the printer, type of paper, and settings you will use
when printing images.
•
Stitch individual photos into wide panoramas or tall views with ArcSoft
PanoramaMaker.™
Click the Help button or question mark that appears on the screen when you’re
using these programs.
EPSON Technical Support
2
Open Adobe Photoshop Elements and choose Full Color Management Optimized for Print under the Color Settings.
EPSON provides technical assistance 24 hours a day through the electronic
support services and automated telephone services described below:
3
Select File > Import > SilverFast (Epson). Then prescan your image and
adjust the marquee.
•
World Wide Web
From the Internet, you can reach EPSON Support at
http://support.epson.com.
4
Click the General tab, then click the Option (or Options) button. Click the
CMS tab.
•
5
For the Input -> Internal setting, select Image Color Matching (ICM) in
Windows or ColorSync in Macintosh.
Automated Telephone Services
To use Automated Telephone Services, you must have a touch tone
telephone and call (800) 922-8911. Your EPSON SoundAdvice Express
Code is 70490. Use it to quickly select your scanner in SoundAdvice.
6
For the Internal -> Output setting, select <RGB>.
7
For the Scanner (Reflective), select the scanner profile you created with
MonacoEZcolor in step 1. For the Internal setting, select a working space
that has a wide color gamut, such as Adobe RGB (1998).
SM
The scanner turns on and the indicator light flashes green. It stops flashing
and turns green when the scanner is ready.
Getting the Most
From Your Scanner
The following sections contain overviews of how to get the most out of your
professional scanner and its software. For detailed instructions, see the
electronic or printed manuals for each software application. The SilverFast
CD-ROM also contains useful QuickTime® tutorials.
Enhancing Your Photos
EPSON Scan includes several features to improve your scans, including
DIGITAL ICE™ Technology, Color Restoration, and Dust Removal (for film).
For details on using these features, see your Quick Guide booklet or on-screen
Perfection 4870 Reference Guide.
Before and After DIGITAL ICE for Photo Print
Before and After Color Restoration
Before and After Dust Removal
8
Create unique artistic creations or effects with your scanned images using
Photoshop Elements or PhotoStudio.
•
Scan documents and save them as files that you can edit with Word® or
other word processing applications, using ABBY® FineReader.® See your
Quick Guide booklet or the ABBYY FineReader User’s Guide or Help for
instructions.
Make sure the Embed ICC profile box is checked to save the settings in
your scan, then click OK.
9
Click Scan to scan your image.
10
Click File > Print Preview. Click the Show More Options box, then select
Color Management from the drop-down box. Select the printer profile you
created in step 1 for the paper you’re going to print on.
11
•
Click Print, check your settings in your printer software (making sure that
color management is turned off and all the settings are the same as you set
them when creating your printer profile with MonacoEZcolor), close your
printer software, and then click OK to print your image.
Problems?
First, check the indicator light on the scanner.
Before you call, please have the following information ready:
•
•
•
•
•
Product name (EPSON Perfection 4870 Pro)
Product serial number (located on the back of the scanner)
Proof of purchase (such as a store receipt) and date of purchase
Computer configuration
Description of the problem
Software Technical Support
Warming up or scanning.
Software
Telephone*/Fax*
Internet and E-mail
Green
Ready to scan.
EPSON Scan
U.S.: (562) 276-4382
support.epson.com
Flashing red
Make sure both transportation locks are unlocked.
Canada: (905) 709-3839
Try restarting your computer and turning the
scanner off and then on again.
6:00 AM to 6:00 PM, Pacific
Time, Monday to Friday
If the red light is still flashing, contact your dealer or
EPSON.
Off
Make sure the scanner is connected to your
computer and turned on.
Scanning 48-bit Images
If your problem is listed here, try these suggestions.
To obtain images in the full 48-bit color depth that your scanner offers, you can
scan into ArcSoft PhotoStudio® with EPSON Scan. You can also scan an image
with the stand-alone SilverFast application.
The New Hardware Wizard Click Cancel and follow the steps in “Install the
appears on your screen.
Software” on the other side of this sheet.
Disconnect the scanner before installing the
software.
1
Raise the scanner lid and place your photo face down on the glass. Make
sure the document mat is in place on the scanner lid.
The scanner makes a
grinding noise when it is
turned on.
Make sure both transportation locks are unlocked.
2
In Windows or Mac OS 9.x, use Acquire in
PhotoStudio with Epson Perfection 4870
selected as the source.
You see a message about
a HI-SPEED USB device
in Windows XP.
Click the x in the corner of the message to close it.
Your scanner will work correctly.
You see an error message
when you try to scan, or
the scanner doesn’t scan.
Make sure the scanner is connected to your
computer, plugged into a power source, and the
power switch is turned on.
Note: If you have the full version of
Photoshop (6.0 or later), you can scan
48-bit images directly with SilverFast or
EPSON Scan.
To Speak to a Customer Service Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM,
Pacific Time, Monday to Friday. Toll or long distance charges may apply.
Flashing green
Note: See your electronic SilverFast manual and movies on the SilverFast
CD-ROM for detailed color space and color management information. To view the
manual and movies, you’ll need Adobe Acrobat Reader and QuickTime 6.0 or
later. Acrobat Reader is included on your CD-ROM.
In Mac OS X, open the stand-alone
SilverFast application (SF-App) and
scan a 48-bit file. Open the image in
PhotoStudio for editing.
•
Make sure both transportation locks are unlocked.
ABBYY FineReader (510) 226-6719
Sprint
fax: (510) 226-6069
www.abbyyusa.com
Adobe Photoshop
Elements
(206) 675-6126
www.adobe.com/support
6:00 AM to 5:00 PM, Pacific
Time, Monday to Friday
(pay support)
techdocs@adobe.com
ArcSoft application (510) 440-9901
software
8:30 AM to 5:30 PM, Pacific
Time, Monday to Friday
support@abbyyusa.com
www.arcsoft.com/
techmain.htm
support@arcsoft.com
www.SilverFast.com
LaserSoft ImagingTM (941) 383-7496
SilverFast
9:00 AM to 5:30 PM, Eastern support@SilverFast.com
Time, Monday to Friday
(pay support)
fax: (941) 387-7574
Monaco SystemsTM (978) 749-9944
www.monacosys.com/
support.html
MonacoEZcolor
9:00 AM to 5:00 PM, Eastern
support@monacosys.com
Time, Monday to Friday
* Toll or long distance charges may apply.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. EPSON Perfection is a registered trademark
and SoundAdvice is a service mark of Epson America, Inc.
DIGITAL ICE is a trademark of Kodak.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their
respective owners. EPSON disclaims any and all rights in those marks.
© 2003 Epson America, Inc. 11/03
CPD-16660
Printed in Singapore XXXXXX XX.XX-XX
If you’re using IEEE 1394 (FireWire)
Plug one end of the IEEE 1394 cable (not included) into the scanner’s
IEEE 1394 port. Then plug the other end into the IEEE 1394 (FireWire or
iLink) port on your computer.
Managing Color Data
More Scanning Options
Questions?
Here are more ways to get the most out of your scanner and software:
Here’s where to look for answers:
•
•
Quick Guide
Use the SilverFast Ai Job Manager for high-capacity batch scanning.
Organize all your photos into albums which you can easily archive to CD or
display in slideshows using ArcSoft PhotoBase.™
See your Quick Guide for instructions on using DIGITAL ICE Technology,
scanning film and text, and basic troubleshooting.
On-Screen Reference Guide
You can use MonacoEZcolor™ and your device software to provide accurate color
data among all your computer input and output devices such as your scanner,
monitor, digital camera, and printer. Here are the basic steps you need to take to
manage color for scans that you will print. See your MonacoEZcolor online
guides for detailed instructions.
5
6
1
Plug the scanner’s power cord into an electrical outlet.
Double-click the Perfection 4870 Reference Guide icon on your desktop.
If you didn’t install it, insert the scanner software CD-ROM in the CD-ROM or
DVD drive. At the Custom Installation screen, select Scanner Reference Guide
only, then click Install. You must have Microsoft® Internet Explorer, Netscape®
Navigator (versions 5.0 or later), or Apple® Safari™ (version 1.0 or later) to
read the Reference Guide.
First you need to use the Create Printer Profile option in MonacoEZcolor to
create profiles for your scanner and printer.
On-Screen Help for EPSON Scan
You must create profiles for each type of print media and settings.
Make sure the cover is closed, then press the P power button on the front of
the scanner to turn it on.
Print an RGB Target with the printer, type of paper, and settings you will use
when printing images.
•
Stitch individual photos into wide panoramas or tall views with ArcSoft
PanoramaMaker.™
Click the Help button or question mark that appears on the screen when you’re
using these programs.
EPSON Technical Support
2
Open Adobe Photoshop Elements and choose Full Color Management Optimized for Print under the Color Settings.
EPSON provides technical assistance 24 hours a day through the electronic
support services and automated telephone services described below:
3
Select File > Import > SilverFast (Epson). Then prescan your image and
adjust the marquee.
•
World Wide Web
From the Internet, you can reach EPSON Support at
http://support.epson.com.
4
Click the General tab, then click the Option (or Options) button. Click the
CMS tab.
•
5
For the Input -> Internal setting, select Image Color Matching (ICM) in
Windows or ColorSync in Macintosh.
Automated Telephone Services
To use Automated Telephone Services, you must have a touch tone
telephone and call (800) 922-8911. Your EPSON SoundAdvice Express
Code is 70490. Use it to quickly select your scanner in SoundAdvice.
6
For the Internal -> Output setting, select <RGB>.
7
For the Scanner (Reflective), select the scanner profile you created with
MonacoEZcolor in step 1. For the Internal setting, select a working space
that has a wide color gamut, such as Adobe RGB (1998).
SM
The scanner turns on and the indicator light flashes green. It stops flashing
and turns green when the scanner is ready.
Getting the Most
From Your Scanner
The following sections contain overviews of how to get the most out of your
professional scanner and its software. For detailed instructions, see the
electronic or printed manuals for each software application. The SilverFast
CD-ROM also contains useful QuickTime® tutorials.
Enhancing Your Photos
EPSON Scan includes several features to improve your scans, including
DIGITAL ICE™ Technology, Color Restoration, and Dust Removal (for film).
For details on using these features, see your Quick Guide booklet or on-screen
Perfection 4870 Reference Guide.
Before and After DIGITAL ICE for Photo Print
Before and After Color Restoration
Before and After Dust Removal
8
Create unique artistic creations or effects with your scanned images using
Photoshop Elements or PhotoStudio.
•
Scan documents and save them as files that you can edit with Word® or
other word processing applications, using ABBY® FineReader.® See your
Quick Guide booklet or the ABBYY FineReader User’s Guide or Help for
instructions.
Make sure the Embed ICC profile box is checked to save the settings in
your scan, then click OK.
9
Click Scan to scan your image.
10
Click File > Print Preview. Click the Show More Options box, then select
Color Management from the drop-down box. Select the printer profile you
created in step 1 for the paper you’re going to print on.
11
•
Click Print, check your settings in your printer software (making sure that
color management is turned off and all the settings are the same as you set
them when creating your printer profile with MonacoEZcolor), close your
printer software, and then click OK to print your image.
Problems?
First, check the indicator light on the scanner.
Before you call, please have the following information ready:
•
•
•
•
•
Product name (EPSON Perfection 4870 Pro)
Product serial number (located on the back of the scanner)
Proof of purchase (such as a store receipt) and date of purchase
Computer configuration
Description of the problem
Software Technical Support
Warming up or scanning.
Software
Telephone*/Fax*
Internet and E-mail
Green
Ready to scan.
EPSON Scan
U.S.: (562) 276-4382
support.epson.com
Flashing red
Make sure both transportation locks are unlocked.
Canada: (905) 709-3839
Try restarting your computer and turning the
scanner off and then on again.
6:00 AM to 6:00 PM, Pacific
Time, Monday to Friday
If the red light is still flashing, contact your dealer or
EPSON.
Off
Make sure the scanner is connected to your
computer and turned on.
Scanning 48-bit Images
If your problem is listed here, try these suggestions.
To obtain images in the full 48-bit color depth that your scanner offers, you can
scan into ArcSoft PhotoStudio® with EPSON Scan. You can also scan an image
with the stand-alone SilverFast application.
The New Hardware Wizard Click Cancel and follow the steps in “Install the
appears on your screen.
Software” on the other side of this sheet.
Disconnect the scanner before installing the
software.
1
Raise the scanner lid and place your photo face down on the glass. Make
sure the document mat is in place on the scanner lid.
The scanner makes a
grinding noise when it is
turned on.
Make sure both transportation locks are unlocked.
2
In Windows or Mac OS 9.x, use Acquire in
PhotoStudio with Epson Perfection 4870
selected as the source.
You see a message about
a HI-SPEED USB device
in Windows XP.
Click the x in the corner of the message to close it.
Your scanner will work correctly.
You see an error message
when you try to scan, or
the scanner doesn’t scan.
Make sure the scanner is connected to your
computer, plugged into a power source, and the
power switch is turned on.
Note: If you have the full version of
Photoshop (6.0 or later), you can scan
48-bit images directly with SilverFast or
EPSON Scan.
To Speak to a Customer Service Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM,
Pacific Time, Monday to Friday. Toll or long distance charges may apply.
Flashing green
Note: See your electronic SilverFast manual and movies on the SilverFast
CD-ROM for detailed color space and color management information. To view the
manual and movies, you’ll need Adobe Acrobat Reader and QuickTime 6.0 or
later. Acrobat Reader is included on your CD-ROM.
In Mac OS X, open the stand-alone
SilverFast application (SF-App) and
scan a 48-bit file. Open the image in
PhotoStudio for editing.
•
Make sure both transportation locks are unlocked.
ABBYY FineReader (510) 226-6719
Sprint
fax: (510) 226-6069
www.abbyyusa.com
Adobe Photoshop
Elements
(206) 675-6126
www.adobe.com/support
6:00 AM to 5:00 PM, Pacific
Time, Monday to Friday
(pay support)
techdocs@adobe.com
ArcSoft application (510) 440-9901
software
8:30 AM to 5:30 PM, Pacific
Time, Monday to Friday
support@abbyyusa.com
www.arcsoft.com/
techmain.htm
support@arcsoft.com
www.SilverFast.com
LaserSoft ImagingTM (941) 383-7496
SilverFast
9:00 AM to 5:30 PM, Eastern support@SilverFast.com
Time, Monday to Friday
(pay support)
fax: (941) 387-7574
Monaco SystemsTM (978) 749-9944
www.monacosys.com/
support.html
MonacoEZcolor
9:00 AM to 5:00 PM, Eastern
support@monacosys.com
Time, Monday to Friday
* Toll or long distance charges may apply.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. EPSON Perfection is a registered trademark
and SoundAdvice is a service mark of Epson America, Inc.
DIGITAL ICE is a trademark of Kodak.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their
respective owners. EPSON disclaims any and all rights in those marks.
© 2003 Epson America, Inc. 11/03
CPD-16660
Printed in Singapore XXXXXX XX.XX-XX
If you’re using IEEE 1394 (FireWire)
Plug one end of the IEEE 1394 cable (not included) into the scanner’s
IEEE 1394 port. Then plug the other end into the IEEE 1394 (FireWire or
iLink) port on your computer.
Managing Color Data
More Scanning Options
Questions?
Here are more ways to get the most out of your scanner and software:
Here’s where to look for answers:
•
•
Quick Guide
Use the SilverFast Ai Job Manager for high-capacity batch scanning.
Organize all your photos into albums which you can easily archive to CD or
display in slideshows using ArcSoft PhotoBase.™
See your Quick Guide for instructions on using DIGITAL ICE Technology,
scanning film and text, and basic troubleshooting.
On-Screen Reference Guide
You can use MonacoEZcolor™ and your device software to provide accurate color
data among all your computer input and output devices such as your scanner,
monitor, digital camera, and printer. Here are the basic steps you need to take to
manage color for scans that you will print. See your MonacoEZcolor online
guides for detailed instructions.
5
6
1
Plug the scanner’s power cord into an electrical outlet.
Double-click the Perfection 4870 Reference Guide icon on your desktop.
If you didn’t install it, insert the scanner software CD-ROM in the CD-ROM or
DVD drive. At the Custom Installation screen, select Scanner Reference Guide
only, then click Install. You must have Microsoft® Internet Explorer, Netscape®
Navigator (versions 5.0 or later), or Apple® Safari™ (version 1.0 or later) to
read the Reference Guide.
First you need to use the Create Printer Profile option in MonacoEZcolor to
create profiles for your scanner and printer.
On-Screen Help for EPSON Scan
You must create profiles for each type of print media and settings.
Make sure the cover is closed, then press the P power button on the front of
the scanner to turn it on.
Print an RGB Target with the printer, type of paper, and settings you will use
when printing images.
•
Stitch individual photos into wide panoramas or tall views with ArcSoft
PanoramaMaker.™
Click the Help button or question mark that appears on the screen when you’re
using these programs.
EPSON Technical Support
2
Open Adobe Photoshop Elements and choose Full Color Management Optimized for Print under the Color Settings.
EPSON provides technical assistance 24 hours a day through the electronic
support services and automated telephone services described below:
3
Select File > Import > SilverFast (Epson). Then prescan your image and
adjust the marquee.
•
World Wide Web
From the Internet, you can reach EPSON Support at
http://support.epson.com.
4
Click the General tab, then click the Option (or Options) button. Click the
CMS tab.
•
5
For the Input -> Internal setting, select Image Color Matching (ICM) in
Windows or ColorSync in Macintosh.
Automated Telephone Services
To use Automated Telephone Services, you must have a touch tone
telephone and call (800) 922-8911. Your EPSON SoundAdvice Express
Code is 70490. Use it to quickly select your scanner in SoundAdvice.
6
For the Internal -> Output setting, select <RGB>.
7
For the Scanner (Reflective), select the scanner profile you created with
MonacoEZcolor in step 1. For the Internal setting, select a working space
that has a wide color gamut, such as Adobe RGB (1998).
SM
The scanner turns on and the indicator light flashes green. It stops flashing
and turns green when the scanner is ready.
Getting the Most
From Your Scanner
The following sections contain overviews of how to get the most out of your
professional scanner and its software. For detailed instructions, see the
electronic or printed manuals for each software application. The SilverFast
CD-ROM also contains useful QuickTime® tutorials.
Enhancing Your Photos
EPSON Scan includes several features to improve your scans, including
DIGITAL ICE™ Technology, Color Restoration, and Dust Removal (for film).
For details on using these features, see your Quick Guide booklet or on-screen
Perfection 4870 Reference Guide.
Before and After DIGITAL ICE for Photo Print
Before and After Color Restoration
Before and After Dust Removal
8
Create unique artistic creations or effects with your scanned images using
Photoshop Elements or PhotoStudio.
•
Scan documents and save them as files that you can edit with Word® or
other word processing applications, using ABBY® FineReader.® See your
Quick Guide booklet or the ABBYY FineReader User’s Guide or Help for
instructions.
Make sure the Embed ICC profile box is checked to save the settings in
your scan, then click OK.
9
Click Scan to scan your image.
10
Click File > Print Preview. Click the Show More Options box, then select
Color Management from the drop-down box. Select the printer profile you
created in step 1 for the paper you’re going to print on.
11
•
Click Print, check your settings in your printer software (making sure that
color management is turned off and all the settings are the same as you set
them when creating your printer profile with MonacoEZcolor), close your
printer software, and then click OK to print your image.
Problems?
First, check the indicator light on the scanner.
Before you call, please have the following information ready:
•
•
•
•
•
Product name (EPSON Perfection 4870 Pro)
Product serial number (located on the back of the scanner)
Proof of purchase (such as a store receipt) and date of purchase
Computer configuration
Description of the problem
Software Technical Support
Warming up or scanning.
Software
Telephone*/Fax*
Internet and E-mail
Green
Ready to scan.
EPSON Scan
U.S.: (562) 276-4382
support.epson.com
Flashing red
Make sure both transportation locks are unlocked.
Canada: (905) 709-3839
Try restarting your computer and turning the
scanner off and then on again.
6:00 AM to 6:00 PM, Pacific
Time, Monday to Friday
If the red light is still flashing, contact your dealer or
EPSON.
Off
Make sure the scanner is connected to your
computer and turned on.
Scanning 48-bit Images
If your problem is listed here, try these suggestions.
To obtain images in the full 48-bit color depth that your scanner offers, you can
scan into ArcSoft PhotoStudio® with EPSON Scan. You can also scan an image
with the stand-alone SilverFast application.
The New Hardware Wizard Click Cancel and follow the steps in “Install the
appears on your screen.
Software” on the other side of this sheet.
Disconnect the scanner before installing the
software.
1
Raise the scanner lid and place your photo face down on the glass. Make
sure the document mat is in place on the scanner lid.
The scanner makes a
grinding noise when it is
turned on.
Make sure both transportation locks are unlocked.
2
In Windows or Mac OS 9.x, use Acquire in
PhotoStudio with Epson Perfection 4870
selected as the source.
You see a message about
a HI-SPEED USB device
in Windows XP.
Click the x in the corner of the message to close it.
Your scanner will work correctly.
You see an error message
when you try to scan, or
the scanner doesn’t scan.
Make sure the scanner is connected to your
computer, plugged into a power source, and the
power switch is turned on.
Note: If you have the full version of
Photoshop (6.0 or later), you can scan
48-bit images directly with SilverFast or
EPSON Scan.
To Speak to a Customer Service Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM,
Pacific Time, Monday to Friday. Toll or long distance charges may apply.
Flashing green
Note: See your electronic SilverFast manual and movies on the SilverFast
CD-ROM for detailed color space and color management information. To view the
manual and movies, you’ll need Adobe Acrobat Reader and QuickTime 6.0 or
later. Acrobat Reader is included on your CD-ROM.
In Mac OS X, open the stand-alone
SilverFast application (SF-App) and
scan a 48-bit file. Open the image in
PhotoStudio for editing.
•
Make sure both transportation locks are unlocked.
ABBYY FineReader (510) 226-6719
Sprint
fax: (510) 226-6069
www.abbyyusa.com
Adobe Photoshop
Elements
(206) 675-6126
www.adobe.com/support
6:00 AM to 5:00 PM, Pacific
Time, Monday to Friday
(pay support)
techdocs@adobe.com
ArcSoft application (510) 440-9901
software
8:30 AM to 5:30 PM, Pacific
Time, Monday to Friday
support@abbyyusa.com
www.arcsoft.com/
techmain.htm
support@arcsoft.com
www.SilverFast.com
LaserSoft ImagingTM (941) 383-7496
SilverFast
9:00 AM to 5:30 PM, Eastern support@SilverFast.com
Time, Monday to Friday
(pay support)
fax: (941) 387-7574
Monaco SystemsTM (978) 749-9944
www.monacosys.com/
support.html
MonacoEZcolor
9:00 AM to 5:00 PM, Eastern
support@monacosys.com
Time, Monday to Friday
* Toll or long distance charges may apply.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. EPSON Perfection is a registered trademark
and SoundAdvice is a service mark of Epson America, Inc.
DIGITAL ICE is a trademark of Kodak.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their
respective owners. EPSON disclaims any and all rights in those marks.
© 2003 Epson America, Inc. 11/03
CPD-16660
Printed in Singapore XXXXXX XX.XX-XX
If you’re using IEEE 1394 (FireWire)
Plug one end of the IEEE 1394 cable (not included) into the scanner’s
IEEE 1394 port. Then plug the other end into the IEEE 1394 (FireWire or
iLink) port on your computer.
Managing Color Data
More Scanning Options
Questions?
Here are more ways to get the most out of your scanner and software:
Here’s where to look for answers:
•
•
Quick Guide
Use the SilverFast Ai Job Manager for high-capacity batch scanning.
Organize all your photos into albums which you can easily archive to CD or
display in slideshows using ArcSoft PhotoBase.™
See your Quick Guide for instructions on using DIGITAL ICE Technology,
scanning film and text, and basic troubleshooting.
On-Screen Reference Guide
You can use MonacoEZcolor™ and your device software to provide accurate color
data among all your computer input and output devices such as your scanner,
monitor, digital camera, and printer. Here are the basic steps you need to take to
manage color for scans that you will print. See your MonacoEZcolor online
guides for detailed instructions.
5
6
1
Plug the scanner’s power cord into an electrical outlet.
Double-click the Perfection 4870 Reference Guide icon on your desktop.
If you didn’t install it, insert the scanner software CD-ROM in the CD-ROM or
DVD drive. At the Custom Installation screen, select Scanner Reference Guide
only, then click Install. You must have Microsoft® Internet Explorer, Netscape®
Navigator (versions 5.0 or later), or Apple® Safari™ (version 1.0 or later) to
read the Reference Guide.
First you need to use the Create Printer Profile option in MonacoEZcolor to
create profiles for your scanner and printer.
On-Screen Help for EPSON Scan
You must create profiles for each type of print media and settings.
Make sure the cover is closed, then press the P power button on the front of
the scanner to turn it on.
Print an RGB Target with the printer, type of paper, and settings you will use
when printing images.
•
Stitch individual photos into wide panoramas or tall views with ArcSoft
PanoramaMaker.™
Click the Help button or question mark that appears on the screen when you’re
using these programs.
EPSON Technical Support
2
Open Adobe Photoshop Elements and choose Full Color Management Optimized for Print under the Color Settings.
EPSON provides technical assistance 24 hours a day through the electronic
support services and automated telephone services described below:
3
Select File > Import > SilverFast (Epson). Then prescan your image and
adjust the marquee.
•
World Wide Web
From the Internet, you can reach EPSON Support at
http://support.epson.com.
4
Click the General tab, then click the Option (or Options) button. Click the
CMS tab.
•
5
For the Input -> Internal setting, select Image Color Matching (ICM) in
Windows or ColorSync in Macintosh.
Automated Telephone Services
To use Automated Telephone Services, you must have a touch tone
telephone and call (800) 922-8911. Your EPSON SoundAdvice Express
Code is 70490. Use it to quickly select your scanner in SoundAdvice.
6
For the Internal -> Output setting, select <RGB>.
7
For the Scanner (Reflective), select the scanner profile you created with
MonacoEZcolor in step 1. For the Internal setting, select a working space
that has a wide color gamut, such as Adobe RGB (1998).
SM
The scanner turns on and the indicator light flashes green. It stops flashing
and turns green when the scanner is ready.
Getting the Most
From Your Scanner
The following sections contain overviews of how to get the most out of your
professional scanner and its software. For detailed instructions, see the
electronic or printed manuals for each software application. The SilverFast
CD-ROM also contains useful QuickTime® tutorials.
Enhancing Your Photos
EPSON Scan includes several features to improve your scans, including
DIGITAL ICE™ Technology, Color Restoration, and Dust Removal (for film).
For details on using these features, see your Quick Guide booklet or on-screen
Perfection 4870 Reference Guide.
Before and After DIGITAL ICE for Photo Print
Before and After Color Restoration
Before and After Dust Removal
8
Create unique artistic creations or effects with your scanned images using
Photoshop Elements or PhotoStudio.
•
Scan documents and save them as files that you can edit with Word® or
other word processing applications, using ABBY® FineReader.® See your
Quick Guide booklet or the ABBYY FineReader User’s Guide or Help for
instructions.
Make sure the Embed ICC profile box is checked to save the settings in
your scan, then click OK.
9
Click Scan to scan your image.
10
Click File > Print Preview. Click the Show More Options box, then select
Color Management from the drop-down box. Select the printer profile you
created in step 1 for the paper you’re going to print on.
11
•
Click Print, check your settings in your printer software (making sure that
color management is turned off and all the settings are the same as you set
them when creating your printer profile with MonacoEZcolor), close your
printer software, and then click OK to print your image.
Problems?
First, check the indicator light on the scanner.
Before you call, please have the following information ready:
•
•
•
•
•
Product name (EPSON Perfection 4870 Pro)
Product serial number (located on the back of the scanner)
Proof of purchase (such as a store receipt) and date of purchase
Computer configuration
Description of the problem
Software Technical Support
Warming up or scanning.
Software
Telephone*/Fax*
Internet and E-mail
Green
Ready to scan.
EPSON Scan
U.S.: (562) 276-4382
support.epson.com
Flashing red
Make sure both transportation locks are unlocked.
Canada: (905) 709-3839
Try restarting your computer and turning the
scanner off and then on again.
6:00 AM to 6:00 PM, Pacific
Time, Monday to Friday
If the red light is still flashing, contact your dealer or
EPSON.
Off
Make sure the scanner is connected to your
computer and turned on.
Scanning 48-bit Images
If your problem is listed here, try these suggestions.
To obtain images in the full 48-bit color depth that your scanner offers, you can
scan into ArcSoft PhotoStudio® with EPSON Scan. You can also scan an image
with the stand-alone SilverFast application.
The New Hardware Wizard Click Cancel and follow the steps in “Install the
appears on your screen.
Software” on the other side of this sheet.
Disconnect the scanner before installing the
software.
1
Raise the scanner lid and place your photo face down on the glass. Make
sure the document mat is in place on the scanner lid.
The scanner makes a
grinding noise when it is
turned on.
Make sure both transportation locks are unlocked.
2
In Windows or Mac OS 9.x, use Acquire in
PhotoStudio with Epson Perfection 4870
selected as the source.
You see a message about
a HI-SPEED USB device
in Windows XP.
Click the x in the corner of the message to close it.
Your scanner will work correctly.
You see an error message
when you try to scan, or
the scanner doesn’t scan.
Make sure the scanner is connected to your
computer, plugged into a power source, and the
power switch is turned on.
Note: If you have the full version of
Photoshop (6.0 or later), you can scan
48-bit images directly with SilverFast or
EPSON Scan.
To Speak to a Customer Service Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM,
Pacific Time, Monday to Friday. Toll or long distance charges may apply.
Flashing green
Note: See your electronic SilverFast manual and movies on the SilverFast
CD-ROM for detailed color space and color management information. To view the
manual and movies, you’ll need Adobe Acrobat Reader and QuickTime 6.0 or
later. Acrobat Reader is included on your CD-ROM.
In Mac OS X, open the stand-alone
SilverFast application (SF-App) and
scan a 48-bit file. Open the image in
PhotoStudio for editing.
•
Make sure both transportation locks are unlocked.
ABBYY FineReader (510) 226-6719
Sprint
fax: (510) 226-6069
www.abbyyusa.com
Adobe Photoshop
Elements
(206) 675-6126
www.adobe.com/support
6:00 AM to 5:00 PM, Pacific
Time, Monday to Friday
(pay support)
techdocs@adobe.com
ArcSoft application (510) 440-9901
software
8:30 AM to 5:30 PM, Pacific
Time, Monday to Friday
support@abbyyusa.com
www.arcsoft.com/
techmain.htm
support@arcsoft.com
www.SilverFast.com
LaserSoft ImagingTM (941) 383-7496
SilverFast
9:00 AM to 5:30 PM, Eastern support@SilverFast.com
Time, Monday to Friday
(pay support)
fax: (941) 387-7574
Monaco SystemsTM (978) 749-9944
www.monacosys.com/
support.html
MonacoEZcolor
9:00 AM to 5:00 PM, Eastern
support@monacosys.com
Time, Monday to Friday
* Toll or long distance charges may apply.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. EPSON Perfection is a registered trademark
and SoundAdvice is a service mark of Epson America, Inc.
DIGITAL ICE is a trademark of Kodak.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their
respective owners. EPSON disclaims any and all rights in those marks.
© 2003 Epson America, Inc. 11/03
CPD-16660
Printed in Singapore XXXXXX XX.XX-XX