User`s guide | Epson 4800 Printer User Manual

E
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Unpacking
As you unpack your camera, check to make sure that all items shown below are
included. If anything is missing, contact your original retailer.
Digital camera
Rechargeable lithium ion
battery (NP-90)
Charger unit (BC-90L)
To attach the strap to the camera
Attach strap
here.
* The shape of the power cord
plug varies according to country
or geographic area.
Power cord
USB cable
Strap
AV cable
CD-ROM
2
Quick Start Guide
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of Photo Transport or
YouTube Uploader for CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
3
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
... 2
... 3
... 9
. . 11
❚❙ Quick Start Basics
14
What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . 15
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
❚ To charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
❚ To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . 19
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
❚ Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
❚ To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❚ To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
❚ To turn power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
❚ To turn off the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
..
..
..
..
24
25
28
29
❚ To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
❚ To delete specific files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❚ To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
❚ Auto Focus Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
❚❙ Snapshot Tutorial
33
Selecting the Exposure Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size)
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO)
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance)
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . .(EV Shift)
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash)
Changing the Control Panel Date/Time Style . . . . . . . . . . . . . . . . . . . . . .
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
..
..
..
..
..
..
..
..
..
33
35
36
41
42
43
44
46
46
❚ Optical Zoom/Digital Zoom Switch Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
❚
❚
❚
❚
Using Normal-speed Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using High Speed CS and Prerecord CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Speed CS Shooting Using the Mechanical Shutter Only . . . . . .(F CS) . . .
Specifying the Method for Saving Continuous Shutter Images. . . . . . . . . . . . . .
4
49
51
55
56
Contents
❚ Continuous Shutter Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
❚❙ Recording Movies
59
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
❚ Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Recording a High-definition Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording a High Speed Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Prerecord Movie . . . . . . . . . . . . . . . . . . . . . . . .(Prerecord (Movie))
Recording a Movie for YouTube . . . . . . . . . . . . . . . . . . . . . (For YouTube)
Shooting a Snapshot while Shooting a Movie . . . . . . . . . . . . . . . . . . . . . .
❚❙ Using BEST SHOT
..
..
..
..
..
62
62
64
66
67
68
What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
❚ Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
To shoot with BEST SHOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
❚ Creating Your Own BEST SHOT Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Shooting with High Speed Night Scene
. . . . . . . .(High Speed Night Scene/High Speed Night Scene and Portrait)
Shooting with High Speed Anti Shake . . . . . . . .(High Speed Anti Shake)
Digitally Correcting for Overexposure
and Underexposure . . . . . . . . . . . . . . . . . . . . . . . . (High Speed Lighting)
Configuring the Camera to Help You Better Time
Your Shots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lag Correction)
Isolating Moving Subjects . . . . . . . . . . . . . . . . . . . . . (Multi-motion image)
. . 72
. . 74
. . 75
. . 76
. . 78
❚ Basic Multi-motion image Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Shooting with Priority on Subject Faces . . . . (High Speed Best Selection)
Shooting an Image in Accordance
with Subject Movement . . . . . . . . . . . . . . . . . (Move Out CS/Move In CS)
Using the Situation-specific CS Scenes . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Situation-specific High Speed Movie Scenes . . . . . . . . . . . . . .
❚❙ Advanced Settings
. . 80
. . 81
. . 86
. . 88
89
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (REC) . . 91
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . . 91
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . . 94
Reducing the Effects of Camera and Subject Movement . . . . (Anti Shake) . . . 95
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area) . . . 96
Using the Auto Focus Assist Light . . . . . . . . . . . . . . . . . . .(AF Assist Light) . . . 98
Shooting with Face Detection . . . . . . . . . . . . . . . . . . . . . .(Face Detection) . . . 98
Shooting with Continuous Auto Focus . . . . . . . . . . . . . . . . (Continuous AF) . . . 99
Changing the Continuous Shutter Mode . . . . . . . . . . . . . . . . . . . . . . . (CS) . . 100
Configuring the Continuous Shutter Image
Save Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Save CS Images) . . 100
❚ Turning Digital Zoom On or Off . . . . . . . . . . . . . . . . . . . . . . .(Digital Zoom) . . 101
❚ Assigning Functions to the [4] and [6] Keys . . . . . . . . . . . . . . . (L/R Key) . . 101
❚
❚
❚
❚
❚
❚
❚
❚
❚
5
Contents
❚
❚
❚
❚
❚
Shooting with Quick Shutter . . . . . . . . . . . . . . . . . . . . . . . . . (Quick Shutter) . .
Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid) . .
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review) . .
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help) . .
Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . . (Memory) . .
102
102
103
103
104
Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . 105
❚
❚
❚
❚
❚
❚
❚
❚
❚
❚
Specifying Snapshot Image Quality . . . . . . . . . . . . (T Quality (Snapshot)) . .
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . .(» Quality (Movie)) . .
Setting the High Speed Movie Frame Rate . . . . . . . . . . . . (HS » Speed) . .
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .(Metering) . .
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . .
Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity) . .
Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter) . .
Controlling Image Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . (Sharpness) . .
Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation) . .
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Contrast) . .
❚❙ Viewing Snapshots and Movies
105
105
106
106
106
107
107
107
107
107
108
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Viewing Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
❚ Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
❚ Dividing Up a CS Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
❚ Copying a CS Group Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Viewing Snapshots and Movies on a TV Screen . . . . . . . . . . . . . . . . . . . . . 115
❚ Viewing High-quality Movies on a Hi-Vision Television . . . . . . . . . . . . . . . . . . . 117
❚❙ Other Playback Functions
(PLAY) 120
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . 120
❚ Transferring Music from Your Computer to Camera Memory . . . . . . . . . . . . . . 122
Creating a Snapshot of Movie Frames . . . . . . . . . . . . . (MOTION PRINT)
Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . (Movie Editing)
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance)
Adjusting the Brightness of an Existing Snapshot . . . . . . . . .(Brightness)
Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . (DPOF Printing)
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . (Protect)
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation)
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize)
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Trimming)
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy)
Dividing Up a Continuous Shutter Group . . . . . . . . . . . . . .(Divide Group)
Combining CS Images into a Single Still Image . . . . . . . . (CS Multi Print)
Editing a CS Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (CS Frame Edit)
6
.
.
.
.
.
.
.
.
.
.
.
.
.
123
124
126
127
127
128
130
130
131
131
132
132
132
Contents
❚❙ Printing
133
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Connecting Directly to a PictBridge Compatible Printer . . . . . . . . . . . . . . . 133
Using DPOF to Specify Images to be Printed and
the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
❚❙ Using the Camera with a Computer
141
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . 142
❚
❚
❚
❚
❚
❚
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . .
Transferring Images from Your Computer to Camera Memory. . . . . . . . . . . . .
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
143
147
148
149
150
151
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
❚ Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . 152
❚ Transferring Images Automatically and Managing Them
on Your Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
❚ Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
❚ Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . . 156
❚ User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Using an Eye-Fi Wireless SD Memory Card to Transfer Images . (Eye-Fi) . 156
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
❚❙ Other Settings
(Set Up) 161
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . (Screen)
Turning off Eye-Fi Card Communication . . . . . . . . . . . . . . . . . . . . (Eye-Fi)
Auto Image Orientation Detection and Rotation . . . . . . . . . .(Auto Rotate)
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds)
Specifying the File Name Serial Number Generation Rule . . . . . (File No.)
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time)
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . (Timestamp)
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust)
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style)
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language)
Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep)
Configuring Auto Power Off Settings . . . . . . . . . . . . . . . (Auto Power Off)
Configuring [r] and [p] Settings . . . . . . . . . . . . . . . . . . . (REC/PLAY)
Configuring USB Protocol Settings . . . . . . . . . . . . . . . . . . . . . . . . . (USB)
Selecting the Screen Aspect Ratio and
Video Output System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Video Out)
Selecting the HDMI Terminal Output Method . . . . . . . . . . .(HDMI Output)
Configuring a Startup Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Startup)
7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
161
161
162
162
163
163
164
165
165
166
166
167
167
168
. 168
. 169
. 169
Contents
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . (Format) . 170
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . (Reset) . 170
❚❙ Configuring Monitor Screen Settings
171
Turning Display Information On and Off . . . . . . . . . . . . . . . . . . . . . . (Info) . 171
Using the On-screen Histogram to Check Exposure . . . . . . (+Histogram) . 171
❚ How to Use the Histogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
❚❙ Appendix
173
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
❚
❚
❚
❚
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To replace the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180
181
181
182
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
❚ To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Computer System Requirements for Bundled Software . . . . . . . . . . . . . . . 184
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
❚ Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
❚ Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . 194
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
8
Contents
General Guide
The numbers in parentheses indicate the pages where each item is explained.
. Camera
Front
Back
1234
5 6
8
9 bk bl bm bn bo bp
bq
7
1 Mode dial (pages 25, 33) blBack lamp
(pages 23, 26, 44)
2 Zoom controller
(pages 25, 46, 114)
bm[0] (Movie) button
(page 59)
3 Shutter button (page 25)
4 Flash (page 44)
bnMovie mode switch
(page 59)
5 Microphones (page 60)
6 Front lamp
boStrap hole (page 2)
(pages 94, 98)
bpTerminal cover
(pages 115, 117, 134,
7 Lens
144, 153)
8 Monitor screen
(pages 11, 171)
bq[USB/AV] port
(pages 115, 134, 144,
9 [ON/OFF] (Power)
(page 23)
153)
bkÕ (Continuous Shutter) br[HDMI OUT] HDMI
(page 49)
br
cm clck bt bs
output (Mini) (page 117)
9
bs[MENU] button
(page 89)
bt[p] (PLAY) button
(pages 23, 28)
ck[SET] button (page 35)
clControl button
([8] [2] [4] [6])
(pages 29, 35, 44, 89,
171)
cm[r] (REC) button
(pages 23, 25)
Bottom
cnBattery/memory card slots (pages 17, 21, 181, 182)
coSpeaker
cpTripod hole
Use this hole when attaching to a tripod.
cn
cp co
. Charger Unit
1+7- Contacts
2[CHARGE] Lamp
3AC jack
1 2
3
10
Monitor Screen Contents
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
7Remaining snapshot memory capacity
123456789
(pages 53, 83)
bk 8Number of recordable CS images
cm
bl
(pages 53, 83)
cl
bm 9Snapshot image size/Quality (pages 36, 105)
ck
bkISO sensitivity (page 41)
bt
blWhite balance setting (page 42)
bn bmExposure compensation (page 43)
bnFlash (page 44)
bs
br bqbpbo
boDate/Time (page 46)
bpTimestamp indicator (page 164)
1 Focus mode (page 91)
bqMovie quality (HD/STD movie) (pages 59, 62)/
Recording speed (high speed movie) (page 62)
2 Metering mode (page 106)
3 Continuous Shutter mode
brFocus frame (pages 26, 96)
(page 49)
bsBattery level indicator (page 18)
btHistogram (page 171)
4 Self-timer mode (page 94)
5 Image deterioration indicator ckFocal distance (Converted to 35 mm film
(page 47)
6 Exposure mode (page 33)
format.) (page 47)
clAnti Shake (page 95)
cmFace Detection (page 98)
NOTE
• The semi-transparent gray frame on the monitor screen indicates the area that is
recorded when shooting a movie. The area within the frame is recorded for a
movie.
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not
correct, the setting will turn orange when you half-press the shutter button.
11
. Movie Recording
12 3
4
5
6
1Recording mode (page 59)
2Audio recording disabled (page 62)
3Remaining movie memory capacity (page 59)
4Movie recording time (page 59)
5Movie recording in progress (page 59)
6 Movie quality (HD/STD movie) (pages 59, 62)/
Recording speed (high speed movie) (page 62)
. Snapshot Viewing
12 3 4
bs
br
bq
bp
5
6
7
8
9
bo bn bm bl bk
1File type
2Protect indicator (page 128)
3Snapshot image size (page 36)
4Folder name/file name (page 158)
5Snapshot image quality (page 105)
6ISO sensitivity (page 41)
7Aperture value
8Shutter speed
9Date/time (page 165)
bkExposure compensation (page 43)
blMetering mode (page 106)
bmWhite balance setting (page 126)
bnFlash (page 44)
boBattery level indicator (page 18)
bpContinuous Shutter mode (page 49)
bqHistogram (page 171)
brExposure mode (page 33)
bsFocal distance (Converted to 35 mm film
format.) (page 47)
12
. Movie Playback
12 3 4
5
6
7
9
8
1No audio data available
2File type
3Protect indicator (page 128)
4Folder name/file name (page 158)
5Movie recording time (page 108)
6Movie quality/speed (pages 59, 62, 62)
7YouTube (page 66)
8Date/time (page 165)
9Battery level indicator (page 18)
. CS Image Viewing
1
4
2
1Current image number/number of images in the
group (page 109)
2CS group icon (page 109)
3Playback guide (page 109)
4CS speed (page 109)
3
13
Quick Start Basics
What is a digital camera?
A digital camera stores images on a memory card, so you can record and
delete them a countless number of times.
Record
Play
Delete
You can use the images you record in a variety of different ways.
Store images on your
computer.
Print images.
14
Attach images to e-mail.
Quick Start Basics
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following three main functions.
High Speed CS/Prerecord CS
Now you can shoot up to 30 continuous highresolution images at the amazing speed of
40 images per second (maximum). Prerecord CS
pre-records images to ensure you are almost never
too late with the shutter button.
See page 51 for more information.
High Speed Movie
Movies can be recorded at up to 1000 frames per
second. This makes it possible to clearly view
phenomena that are invisible to the human eye, in
slow motion.
See page 62 for more information.
HD Movie Recording
You can record movies in high-quality HD.
(1280x720 pixels 30 fps)
1280x720 pixels
See page 62 for more information.
15
Quick Start Basics
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
under “To charge the battery” to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-90) for
power. Never try to use any other type of battery.
To charge the battery
1.
Aligning the positive + and
negative - terminals of the battery
with those of the charger unit, load
the battery into the charger unit.
2.
Plug the charger unit into a
household power outlet.
[CHARGE] lamp
About 200 minutes are required to
reach full charge. The [CHARGE]
lamp will go out when charging is
complete. Unplug the power cord
from the power outlet and then
remove the battery from the charger.
Lamp Status
Description
Lit Red
Charging
Flashing Red
Abnormal ambient temperature, charger problem, or
battery problem (page 180)
Off
Charging complete
16
Quick Start Basics
Other Charging Precautions
• Use the special charger (BC-90L) to charge the special lithium ion battery (NP-90).
Never use any other type of charger device. Attempting to use a different charger
can result in unexpected accident.
• A battery that is still warm due to normal use may not charge fully. Give the battery
time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the charger into an outlet that is further away from the TV or
radio.
• Actual charging time depends on current battery capacity and charging conditions.
To load the battery
1.
Open the battery cover.
Slide the battery cover slider towards OPEN
and then open it as indicated by the arrows in
the illustration.
2.
Load the battery.
With the EXILIM logo on the
battery facing downwards (in the
direction of the lens), hold the
stopper next to the battery in the
direction indicated by the arrow
as you slide the battery into the
camera. Press the battery in until
the stopper secures it in place.
Stopper
Battery contacts
EXILIM logo
Front
17
Back
Quick Start Basics
3.
Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
• For information about how to replace the
battery, see page 181.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
Remaining Power
High
Battery Indicator
Indicator Color
Cyan
Low
*
*
* Amber
*
*
Red
*
Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when
is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about one day with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
165).
• See page 201 for information about battery life and memory capacity.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (Flash Off) for the flash setting
(page 44).
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 166, 167).
• Select “Off” for “Continuous AF” (page 99).
• Avoid unnecessary optical zoom operations.
18
Quick Start Basics
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 166). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
1.
Press [ON/OFF] to turn on the
camera.
[ON/OFF]
Zoom controller
2.
Use [8], [2], [4], and [6] to select
the language you want and then
press [SET].
3.
Use [8] and [2] to select a date style and then press [SET].
Example: July 10, 2012
YY/MM/DD * 12/7/10
DD/MM/YY * 10/7/12
MM/DD/YY * 7/10/12
4.
Set the date and the time.
Use [4] and [6] to select the setting you want to
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, slide
the zoom controller.
5.
After setting the date and time, use [4] and [6]
to select “Apply” and then press [SET].
19
Quick Start Basics
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 166
– Date and time: Page 165
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 194.
Supported Memory Cards
– SD Memory Card
– SDHC Memory Card
Use one of the above types of memory card.
• Use only SD cards that are compliant with the SD Card
Association specification.
. Memory Card Handling Precautions
Certain types of cards can slow down processing speeds, and even can make it
impossible to store High Quality movies correctly. Also, use of certain types of
memory cards slows down data transfer and increases the time it takes to record
movie data, which can result in movie frames being dropped. The Y indicator on the
monitor screen turns yellow to indicate that frames are being dropped. In order to
avoid problems such as these, use of an Ultra High Speed Type SD memory card is
recommended. Note, however that CASIO makes no guarantees about the operation
of any Ultra High Speed Type SD memory card used with this camera.
20
Quick Start Basics
To load a memory card
1.
Press [ON/OFF] to turn off the
camera and then open the battery
cover.
Slide the battery cover slider towards
OPEN and then open it as indicated by
the arrows in the illustration.
2.
Load a memory card.
Positioning the memory card so its front
is facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you hear
it click securely into place.
Front
Front
3.
Back
Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
• For information about how to replace
the memory card, see page 182.
IMPORTANT!
• Never insert anything besides a supported memory card (page 20) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the battery, and contact your retailer or nearest CASIO
authorized service center.
21
Quick Start Basics
To format (initialize) a new memory card
You need to format a new memory card before using it for the first time.
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “Format” and then press [6].
3.
Use [8] and [2] to select “Format” and then press [SET].
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD or SDHC memory card, formatting on a computer can
result in non-conformity with the SD format, causing problems with compatibility,
operation, etc.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
22
Quick Start Basics
Turning the Camera On and Off
To turn power on
To enter the REC mode, press [ON/OFF] (Power) or
[r] (REC). To enter the PLAY mode, press [p]
(PLAY).
The back lamp will light (green) momentarily and the
camera will turn on. If you are entering the REC mode,
the lens will extend from the camera at this time.
• Take care to ensure that nothing is restricting or
coming into contact with the lens as it extends.
Holding the lens with your hand so it cannot extend
creates the risk of malfunction.
• Pressing [p] (PLAY) while in the REC mode
switches to the PLAY mode.
• The Sleep function or Auto Power Off (pages 166,
167) will turn off power automatically if you do not
perform any operation for a preset amount of time.
[ON/OFF] (Power)
Back lamp
[p] (PLAY)
[r] (REC)
To turn off the camera
Press [ON/OFF] (Power).
• You can configure the camera so power does not turn on when you press [r]
(REC) or [p] (PLAY). You also can configure the camera to turn off when you
press [r] (REC) or [p] (PLAY) (page 167).
23
Quick Start Basics
Holding the Camera Correctly
Your images will not come out
Horizontal
Vertical
clearly if you move the camera
when you press the shutter
button. When pressing the
shutter button, be sure to hold
the camera as shown in the
illustration, and keep it still by
pressing your arms firmly
against your sides as you shoot.
Holding the camera still,
Hold the camera so the flash is above the lens.
carefully press the shutter button
and take care to avoid all
movement as the shutter
releases and for a few moments after it releases. This is especially important when
available lighting is low, which slows down the shutter speed.
NOTE
• Hold the camera securely in your left hand, with
Flash
your fingers around the grip on the right front of the
Front lamp
camera.
• Take care that your fingers and the strap do not
cover any of the areas indicated in the illustration.
• To protect against accidentally dropping the
camera, attach the wrist strap and make sure it is
around your fingers or wrist while you are operating
the camera.
• Never swing the camera around by its strap.
Lens
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
• When the “Auto Rotate” setting is turned on, the camera will detect whether it is
being held vertically or horizontally when a snapshot image is shot. When you
display an image shot with the camera held vertically, the image is rotated
automatically 90 degrees when displayed on the monitor screen (page 162).
24
Quick Start Basics
IMPORTANT!
• Take care to ensure that your fingers are not blocking or
are not too close to the flash. Fingers can cause unwanted
shadows when using the flash.
To shoot a snapshot
The following procedure describes how to shoot a single snapshot. For information
about shooting a series of shots (Continuous Shutter), see page 49.
1.
Press [r] (REC) to turn on the camera.
2.
Set the mode dial to t (Auto).
Auto icon
Monitor screen
Shutter button
Mode dial
[r] (REC)
Remaining snapshot memory
capacity (page 194)
3.
Point the camera
at the subject.
• You can zoom the
image, if you want.
Zoom controller
25
w Wide Angle
z Telephoto
Quick Start Basics
4.
Half-press the shutter button to focus the image.
When focus is complete, the camera will beep, the back lamp will light green, and
the focus frame will turn green.
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not
correct, the setting will turn orange when you half-press the shutter button.
Focus frame
Back lamp
ISO sensitivity
Aperture value
Shutter speed
Half-press
Press lightly
until the button
stops.
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed
at. Mastering how much pressure is required
for a half-press and a full-press of the shutter
button is an important technique for goodlooking images.
Beep, beep (Image is in focus.)
5.
Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
Full-press
Snap (Image is recorded.)
26
Quick Start Basics
Recording a Movie
[0] (Movie)
Press [0] (Movie) to start movie recording. Press [0] (Movie)
again to stop movie recording. See the following pages for
details.
Standard movie (STD movie): page 59
High-definition movie (HD movie): page 62
High speed movie (HS movie): page 62
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Point the camera at the
subject and try to focus again.
. If the subject is not in the center of the frame...
“Focus lock” (page 93) is a technique you can use when you want to shoot an image
in which the subject to be focused on is not within the focus frame in the center of the
screen.
27
Quick Start Basics
Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 108.
• For information about images recorded using continuous shutter (CS), see page
109.
1.
Press [p] (PLAY) to enter the
PLAY mode.
• This will display one of the snapshots
currently stored in memory.
• Information about the displayed
snapshot also is included (page 12).
• You also can clear the information to
[p] (PLAY)
view only the snapshot (page 171).
• You can zoom in on the image by
sliding the zoom controller towards z (page 114). If you are recording a
snapshot that is very important to you, it is recommended that you zoom the
image and check its details after recording it.
2.
Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
[6]
[6]
[4]
[4]
NOTE
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
28
Quick Start Basics
Deleting Images
If memory becomes full, you can delete images you no longer need in order to free up
storage and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
• For information about images recorded using continuous shutter (CS), see page
110.
To delete a single file
1.
Press [p] (PLAY) to enter the PLAY mode and then
press [2] (
).
2.
Use [4] and [6] to scroll through the files until the one
you want to delete is displayed.
3.
Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
• If a CS group (page 109) is displayed when you perform the above procedure,
all of the images in the currently displayed CS group will be deleted.
29
Quick Start Basics
To delete specific files
1.
Press [p] (PLAY) to enter the PLAY mode and then press [2] (
2.
Use [8] and [2] to select “Delete Files” and then press [SET].
).
• This displays a file selection screen.
3.
Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
4.
Repeat step 3 to select other files, if you want. After you are finished
selecting files, press [MENU].
5.
Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 5 and then press [SET].
To delete all files
1.
Press [p] (PLAY) to enter the PLAY mode and then press [2] (
2.
Use [8] and [2] to select “Delete All Files” and then press [SET].
3.
Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
).
This will cause the message “There are no files” to appear.
30
Quick Start Basics
Snapshot Shooting Precautions
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded at the quality set for the image quality setting (page 105).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Other Precautions
• The slower the shutter speed, the greater the possibility that noticeable noise will
be generated in an image. Because of this, the camera automatically performs a
noise reduction at slow shutter speeds. The noise reduction process causes it to
take longer to record images at lower shutter speeds. The shutter speeds for which
noise reduction is performed depend on the camera setup and shooting conditions.
• A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any key operation while the image
recording operation is in progress.
• Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
B
31
Quick Start Basics
Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Subject that is too far away for light from the AF assist light to reach
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly, try using focus lock (page 93) or Manual Focus (page
91).
32
Quick Start Basics
Snapshot Tutorial
Selecting the Exposure Mode
Your camera has a variety of different exposure
modes. Before recording an image, rotate the mode
dial to select the exposure mode that suits the type of
image you are trying to record.
Mode dial
b BEST SHOT
Simply select one of a collection of built-in sample scenes and the camera sets
up automatically for beautiful images every time (page 68).
t Auto
Use this setting for easy image recording. This is the mode you normally should
use (page 25).
A A (Aperture Priority) mode
In this mode, you select the aperture and other settings
are adjusted accordingly.
1 Press [SET] to open the control panel.
2 Use [8] and [2] to select the fourth control panel
option from the top (aperture).
3 Use [4] and [6] to change the aperture setting.
Aperture value
S S (Shutter Speed Priority) mode
In this mode, you select the shutter speed and other
settings are adjusted accordingly.
1 Press [SET] to open the control panel.
2 Use [8] and [2] to select the fourth control panel
option from the top (shutter speed).
3 Use [4] and [6] to change the shutter speed setting.
Shutter speed
M M (Manual Exposure) mode
This mode gives you total control over aperture and
shutter speed settings.
1 Press [SET] to open the control panel.
2 Use [8] and [2] to select the fourth control panel
option from the top (aperture).
3 Use [4] and [6] to change the aperture setting.
4 Use [8] and [2] to select the fifth control panel
option from the top (shutter speed).
5 Use [4] and [6] to change the shutter speed
setting.
33
Aperture value
Shutter speed
Snapshot Tutorial
IMPORTANT!
• The aperture and shutter speed setting control panels both
have two-level displays. The upper level value is for
snapshots, while the lower value is for movies.
Value for
• You may not be able to achieve the brightness you want
snapshots
when shooting an image that is very dark or very bright. If
this happens, use the M mode to adjust the aperture or
Value for movies
shutter speed manually.
• “S Image AS” (page 95) does not work in the S mode and
M mode. You can, however, turn on “A Camera AS”, if
you like.
• In the S mode, ISO sensitivity (page 41) always operates according to its “AUTO”
setting. The ISO sensitivity setting cannot be changed while in the S mode.
• While A, S, or M is selected for the exposure mode, the flash will not fire if > (Auto
Flash) or ¥ (Red Eye Reduction) is selected as the flash mode. If you want the
flash to fire, select < (Flash On) as the flash mode.
• The displayed ISO sensitivity, shutter speed or aperture value will turn orange
when you half-press the shutter button if the image is overexposed or
underexposed.
34
Snapshot Tutorial
Using the Control Panel
The control panel can be used to configure camera settings.
1.
[8] [2] [4] [6]
In the REC mode, press [SET].
[SET]
2.
Use [8] and [2] to select the setting you want to change.
This will select one of the control panel icons and display its settings.*1
1Image size/Quality*2 (pages 36, 105)
2ISO sensitivity (page 41)
3White balance (page 42)
4EV shift (page 43)
5Not displayed in this mode
6Not displayed in this mode
7Not displayed in this mode
8Flash (page 44)
9Date/Time (page 46)
Control panel
*1 Items displayed in the control panel depend on the recording mode.
*2 Image quality cannot be changed using the control panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
1
2
3
4
5
6
7
8
9
This will apply the settings and return to the REC mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 89).
35
Snapshot Tutorial
Changing the Image Size (Size)
. Pixels
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
Pixel
. About image sizes
The size of an image indicates how many pixels it contains, and is expressed as
horizontal pixelsxvertical pixels.
10M (3648x2736) size image =
Approximately 10 million pixels
3648*
2736*
VGA (640x480) size image =
Approximately 300,000 pixels
640*
480*
36
* Unit: pixels
Snapshot Tutorial
Image Size Selection Tips
Note that larger images have more pixels, so they take up more memory space.
Large Number
of Pixels
More detail, but takes up more memory. Best
when you plan to print large-size prints (such
as A3 size).
Small Number
of Pixels
Less detail, but takes up less memory. Best
when you want to send images by e-mail, etc.
• For information about image size, image quality, and number of images that can be
stored, see page 194.
• For information about movie image size, see page 105.
• For information about resizing existing snapshots, see page 130.
. To select the image size
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the top control panel option (Image Size).
3.
Use [4] and [6] to select an image size and then press [SET].
37
Snapshot Tutorial
Image Size
(Pixels)
RAW+
Suggested Print
Size and
Application
Description
RAW+JPEG
(Select when you
want to process
image data
yourself.)
Saves the image as both normal JPEG data and
RAW image data. A 10M size image is stored
for the JPEG data. RAW image data is
unprocessed data output by the image sensor
and is saved in DNG (digital negative) format.
Though the image of such data is virtually
undeteriorated, it cannot be viewed on the
camera’s monitor screen or printed. After
transferring RAW image data to your computer,
you can use software that supports the generalpurpose DNG format to process the image and
convert it to image data that suits your particular
needs. Since both RAW image data and JPEG
data are saved by the camera, you can view the
JPEG version on the camera’s monitor screen.
10M
Poster Print
(3648x2736)
3:2
Poster Print
(3648x2432)
Good detail for better clarity even for images
cropped (page 131) from the original
16:9
HDTV
(3648x2048)
9M
A3 Print
(3456x2592)
7M
A3 Print
(3072x2304)
Good detail
4M
A4 Print
(2304x1728)
2M
3.5"x5" Print
(1600x1200)
Best when preserving memory capacity is
relatively more important than image quality.
VGA
(640x480)
Image files are smaller, which is better when
attaching images to e-mail. However, images
are relatively coarser.
E Mail
38
Snapshot Tutorial
• The initial factory default image size setting is 10M (10 million pixels).
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
• Available image sizes are limited for some functions as noted below.
This image size can be selected in the Single Shot mode only. This
image size cannot be selected in the High Speed CS, Normal Speed
CS, or F CS mode.
If “RAW+” is selected in the Single Shot Mode
RAW+
10M
Changes to this image
size automatically
Doing this
Entering the Normal Speed CS mode
10M
Entering the F CS mode
10M
Entering the High Speed CS mode
9M
This image size cannot be selected in the High Speed CS mode or when
using some BEST SHOT scenes*. Switching to the High Speed CS
mode or selecting some BEST SHOT scenes* while “10M” is selected
will cause the image size setting to change to “9M” automatically.
These image sizes cannot be selected in the High Speed CS or F CS
mode, or when using some BEST SHOT scenes*.
If “3:2” or “16:9” is selected in another mode
3:2,
16:9
Changes to this image
size automatically
Doing this
Entering the High Speed CS mode
9M
Selecting some BEST SHOT scenes*
9M
Entering the F CS mode
10M
39
Snapshot Tutorial
9M
This image size can be selected only in the High Speed CS mode or
when using some BEST SHOT scenes*. Switching to another mode
from the High Speed CS mode or selecting some BEST SHOT scenes*
while “9M” is selected will cause the image size setting to change to
“10M” automatically.
* Applicable BEST SHOT scenes: “Move In CS”, “Move Out CS”, “High Speed
Anti Shake”, “High Speed Night Scene”, “High Speed Night Scene and Portrait”,
“Multi-motion Image”, “High Speed Best Selection”, “Lag Correction”, “High
Speed Lighting”, “Expression CS”, “Baby CS”, “Child CS”, “Pet CS”, “Sports CS”
40
Snapshot Tutorial
Specifying ISO Sensitivity (ISO)
ISO sensitivity is a measure of sensitivity to light.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the second control panel option from the top
(ISO Sensitivity).
3.
Use [4] and [6] to select the setting you want and then press [SET].
AUTO
Adjusts sensitivity automatically according to conditions
ISO 100
Lower
sensitivity
ISO 200
Slow shutter speed
Less noise
Fast shutter speed (Set
for shooting in dimly lit
areas.)
Some coarseness
(increased digital
noise)
ISO 400
ISO 800
ISO 1600
Higher
ISO 3200 sensitivity
• In the S (shutter speed priority) mode, ISO sensitivity always operates
according to its “AUTO” setting. The ISO sensitivity setting cannot be changed
while in the S mode.
• The current ISO sensitivity setting is used when shooting a movie in the M
(manual exposure) mode.
• “S Image AS” (page 95) can be used only when the ISO sensitivity setting is
“AUTO”.
• An ISO setting of ISO 400 or greater is not supported when the “Image Size”
setting is “RAW+”. If the ISO setting is “ISO 400” or greater when you change
the “Image Size” setting to “RAW+”, an ISO setting of “ISO 200” will be used for
recording.
• Higher ISO sensitivity values tend to result in digital noise in images.
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take
relatively longer for the camera to finish recording an image after it is shot. You
will not be able to perform any key operation while image recording is in
progress.
41
Snapshot Tutorial
Adjusting White Balance (White Balance)
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the third control panel option from the top
(White Balance).
3.
Use [4] and [6] to select the shooting condition you want and then
press [SET].
‡ Auto WB
Configures the camera to adjust white balance automatically
¤ Daylight
For shooting outdoors on a clear day
' Overcast
For shooting outdoors on an overcast rainy day, in the
shade, etc.
“ Shade
For shooting on a clear day in the shade of trees or buildings
† Day White
Fluorescent
For shooting under white or day white fluorescent lighting
– Daylight
Fluorescent
For shooting under daylight fluorescent lighting
« Tungsten
For shooting under light bulb lighting
· Manual WB
For configuring the camera manually to suit a particular light
source.
Blank white
1 Select “· Manual WB”.
paper
2 Under the lighting conditions you plan to
use when shooting, point the camera at
a blank white piece of paper so it fills the
entire monitor screen and then press the
shutter button.
3 Press [SET].
The white balance setting is retained even
if you turn off the camera.
42
Snapshot Tutorial
• When “‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
Correcting Image Brightness (EV Shift)
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3EV
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the fourth control panel option from the top
(EV Shift).
• When A or S is selected as the exposure mode, the EV Shift is the fifth control
panel option from the top.
3.
Use [4] and [6] to adjust the exposure compensation value.
[6]: Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[4]: Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
To cancel exposure compensation, change
the EV value to 0.0.
4.
Exposure compensation value
Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
43
Snapshot Tutorial
Using Flash (Flash)
1.
In the REC mode, press [2] (
once.
2.
Use [4] and [6] to select the flash
setting you want and then press
[SET].
3.
)
Flash
[2] (
)
> Auto Flash
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
? Flash Off
Flash does not fire.
< Flash On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
¥ Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
Press the shutter button to shoot.
Back lamp
Flashes red while the flash is charging to indicate that image
recording is disabled.
• You will not be able to take another flash snapshot until the
lamp stops flashing red, which indicates that charging is
complete.
< indicates the flash will fire.
• For information about Flash Range, see page 199.
44
Snapshot Tutorial
NOTE
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too
close.
• Flash charging time (page 199) depends on operating conditions (battery
condition, ambient temperature, etc.).
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
• Select ? (Flash Off) for the flash setting when shooting in areas where flash
photography is prohibited.
• While A, S, or M is selected for the exposure mode, the flash will not fire if > (Auto
Flash) or ¥ (Red Eye Reduction) is selected as the flash mode. If you want the
flash to fire, select < (Flash On) as the flash mode.
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye.
Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from
the camera.
Other Useful Flash Features
• Changing the flash intensity (page 107)
45
Snapshot Tutorial
Changing the Control Panel Date/Time Style
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the bottom control panel option (Date/Time).
You can use [4] and [6] to select date or time display.
NOTE
• You can select either of two display styles (page 165) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
Shooting with Zoom
Your camera provides you with 10X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center portion of the image to enlarge it) for total zoom capabilities of
10X to 159.4X. The image deterioration point depends on the image size (page 48).
1.
In the REC mode, slide the zoom controller to zoom.
w Wide Angle
Zoom controller
z Telephoto
w (Wide Angle) : Reduces the size of the subject and broadens the range
z (Telephoto) : Enlarges the subject and narrows the range
2.
Press the shutter button to shoot the image.
46
Snapshot Tutorial
NOTE
• The higher the digital zoom factor, the coarser the recorded image. Note that the
camera also has a function that lets you record using digital zoom without image
deterioration (page 48).
• Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Digital zoom is disabled while “RAW+” is selected for the “Image Size” setting
(page 37).
• Both optical zoom and digital zoom are disabled during high speed movie
recording.
• Zooming with digital zoom only is possible during recording an HD or STD movie.
However, can zoom with optical zoom before you press [0] to start HD or STD
movie recording.
Optical Zoom/Digital Zoom Switch Point
If you hold the zoom controller towards z (Telephoto), the zoom operation will stop
when the optical zoom factor reaches its maximum. Momentarily releasing the zoom
controller and then holding it again towards z (Telephoto) will switch to digital
zoom, which you can use to set an even higher zoom factor.
• If you do want to use digital zoom, change the “Digital Zoom” setting to “On” (page
101).
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Focal distance
(Converted to 35 mm film format.)
Image deterioration indicator
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual
Focus.)
* Products marketed in some geographic areas display
inches and feet.
Zoom bar
47
Snapshot Tutorial
Undeteriorated digital zoom
Deteriorated image
quality range
Undeteriorated image
quality range
10X to 57X
1X
Optical/digital zoom switch point
* 10X optical zoom point
40X to 159.4X
Zoom pointer (Indicates current zoom.)
Deterioration point
• An image deterioration icon (Ù) will
Image
Maximum
Deterioration
appear on the monitor screen at the
Size
Zoom Factor
Point
point where image deterioration starts.
• The deterioration point depends on
10M
40X
10X
the current image size setting (page
3:2
40X
10X
36). The smaller the image size
16:9
40X
10X
setting, the higher the zoom factor you
can use before reaching the image
9M
40X
10X
deterioration point.
7M
47.5X
11.9X
• Though digital zoom generally causes
a deterioration of image quality, some
4M
63.3X
15.8X
digital zoom without image
2M
91X
22.8X
deterioration is possible with image
sizes of “7M” and smaller. The range
VGA
159.4X
57X
in which you can use digital zoom
without image deterioration is
indicated on the display. The
deterioration point depends on the
image size.
• When “HD/STD” is selected as the movie mode, minimal deterioration up to a
zoom factor of 57X is possible only for STD shooting.
• The zoom bar is not displayed while movie recording is in progress.
48
Snapshot Tutorial
Using Continuous Shutter
Pressing Õ (Continuous Shutter) toggles
between the Continuous Shutter mode and the
Single Shot mode (page 25).
Õ (Continuous Shutter)
Using Normal-speed Continuous Shutter
The number of consecutive images you can shoot is theoretically unlimited, as long
as there is memory available to store them. Also note that the maximum shooting
speed of Normal Speed CS is limited by the type of memory card you are using and
the camera setup.
1.
Set the mode dial to t (Auto).
2.
In the REC mode, press [MENU].
3.
Use [4] and [6] to select the “REC” tab.
4.
Use [8] and [2] to select “CS” and then press [6].
5.
Use [8] and [2] to select “Normal Speed CS”, and then press [SET].
6.
Press Õ (Continuous Shutter).
Normal Speed CS icon
• This will display Z (Normal Speed CS) and
surround the monitor screen with a yellow frame.
If this does not happen, press Õ again.
7.
Hold down the shutter button to shoot.
Images continue to be shot as long as you keep the
shutter button depressed and there is memory
available to store them. Releasing the shutter button
stops shooting.
49
Yellow frame
Snapshot Tutorial
IMPORTANT!
• For Normal Speed CS, adjustment of exposure, white balance, and Auto Focus is
performed for each CS image when the camera is configured with settings shown
below.
Exposure Mode
Auto, A (Aperture Priority) mode, S (Shutter Speed Priority)
mode
White Balance
Auto WB
Focus
Q Auto Focus, ´ Macro
• For Normal Speed CS, the ISO sensitivity, exposure, and shutter speed values that
appear on the monitor screen when you half-press the shutter button indicate the
values for the first CS image. Values for subsequent images are not displayed.
• You also can select a flash mode for Normal Speed CS shooting. When using the
flash, the CS interval will be affected by the time it takes for the flash to charge.
• Combining Normal Speed CS images into a CS group (page 109) manually on the
playback screen is not supported.
• You cannot specify the number of images shot per second (fps) with Normal Speed
CS.
• The number of images per second (fps) of Normal Speed CS varies slightly
depending on the type of memory card you are using and its current condition
(remaining capacity, fragmentation state, etc.).
• You cannot use Normal Speed CS in combination with Prerecord CS.
• “O Tracking” is not supported for the AF Area setting (page 96) while Normal
Speed CS is enabled. If you select “O Tracking” while Normal Speed CS is
enabled, the camera will automatically apply the “U Spot” AF Area setting.
• When shooting with Normal Speed CS in combination with the Self-timer when it is
set to “2 sec” or “10 sec”, once CS shooting starts it will continue until you press the
shutter button or until there is no more memory available to store images.
B
50
Snapshot Tutorial
Using High Speed CS and Prerecord CS
With High Speed CS, you can configure the camera to shoot at a speed of 1, 3, 5, 7,
10, 15, 30, or 40 images per second, as long as you keep the shutter button and there
is memory available to store the images. With Prerecord CS, half-pressing the shutter
button starts continual pre-recording of images to a temporary buffer. Then when you
press the shutter button the rest of the way down, the camera stores what is currently
in the buffer and starts real-time continuous shutter recording of new images. Realtime recording continues until you release the shutter button or until a total of up to
30 images (buffer images plus new images) are recorded. You can configure
Prerecord CS to specify how many of the 30 images are recorded in the buffer and
how many are recorded after you fully press the shutter button. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
Shutter button half-press
Shutter button full-press
Shutter button release
Recorded images (up to 30 images)
Pre-recorded images
Continuous recording of images until shutter
button released*
* You can record up to 30 images (pre-recorded buffer images plus real-time images) for
each Prerecord CS operation.
• You can specify 5, 10, 20, or 30 as the maximum number of shots for each
continuous shutter operation.
• You can specify anywhere from 0.75 seconds up to 30 seconds as the continuous
shutter shooting time, which is the amount of time of the pre-record buffer plus the
amount of time that continuous shutter recording is performed after the shutter
button is pressed all the way. The maximum shooting time depends on the
selected CS speed. You can select a CS speed in the range of 1 to 30 fps.
40 images per second
(40 fps)
You can shoot up to 30 images in 0.75 seconds.
One image per second
(1 fps)
You can shoot up to 30 images over 30 seconds.
• You can configure the mode so up to 25 images are pre-recorded to the buffer until
you fully press the shutter button.
• The minimum number of pre-recorded buffer images you can specify is three. Total
recording time depends on the current continuous shutter frames-per-second (fps)
setting.
• Specifying zero for the number of pre-recorded images disables Prerecord CS and
performs High Speed CS only (without pre-recording).
51
Snapshot Tutorial
1.
Set the mode dial to t (Auto).
2.
In the REC mode, press [MENU].
3.
Use [4] and [6] to select the “REC” tab.
4.
Use [8] and [2] to select “CS” and then press [6].
5.
Use [8] and [2] to select “High Speed CS”, and then press [SET].
6.
Press Õ (Continuous Shutter).
High Speed CS icon
• This will display Š (High Speed CS) and
surround the monitor screen with a yellow frame.
If this does not happen, press Õ again.
7.
Press [SET].
8.
Use [8] and [2] to select the fourth control
panel option from the bottom (High Speed CS
fps).
9.
Use [4] and [6] to select the continuous shutter
(CS) speed you want and then press [SET].
Yellow frame
CS speed
AUTO
The camera determines the CS speed by determining the
surrounding light level and automatically configuring a speed that
prevents underexposure.
1 to 40 fps
Enables specification of the number of CS images recorded per
second.
10.
Use [8] and [2] to select the third control panel
option from the bottom (Max CS shots).
11.
Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation and then press [SET].
12.
Use [8] and [2] to select the second control panel option from the
bottom (Prerecord CS shots).
52
Snapshot Tutorial
13.
Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero.
Shutter button full-press
Number of pre-record
images and pre-record
time (Not displayed when
“AUTO” is selected for
“High Speed CS fps”.)
14.
Number of remaining images
and remaining recording time
after the shutter button fullpress (Not displayed when
“AUTO” is selected for “High
Speed CS fps”.)
Press [SET].
• The approximate number of recordable CS images will appear on the monitor
screen.
Number of recordable CS images (If you are not performing
Prerecord CS, the allowable continuous shutter time also is displayed.)
Remaining snapshot memory capacity
15.
Half-press the shutter button.
This will cause the camera to start pre-recording images.
• The camera will not emit a shutter sound when you half-press the shutter
button while Prerecord CS is selected.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
16.
When you are ready to shoot, press the shutter button the rest of the
way down.
This will record the images in the pre-record buffer and start recording new
images in real-time. Images continue to be shot as long as you keep the shutter
button depressed.
17.
Real-time shooting will stop when you release the shutter button or
after the maximum number of shots is reached.
18.
Save the CS images (page 56).
53
Snapshot Tutorial
NOTE
• Note the following when selecting a High Speed CS speed (fps) setting.
– Use a higher High Speed CS speed (fps) setting when shooting a fast-moving
subject.
– Use a slower High Speed CS speed (fps) setting when shooting a slower-moving
subject.
• Note the following when selecting a High Speed CS maximum number of shots
setting.
– The greater the number of shots, the longer it takes to save them after shooting
is complete.
• Note the following when specifying a Prerecord CS shots setting.
– A setting that results in a Prerecord CS operation that takes at least 0.3 seconds
is recommended because there is a minimal lag from about 0.1 seconds to 0.3
seconds between the point you decide to shoot and the point that the shutter
button is fully depressed.
54
Snapshot Tutorial
High Speed CS Shooting Using the Mechanical Shutter Only
(F CS)
Due to the characteristics of the CMOS imaging element, shooting fast-moving
subjects with High Speed CS may cause the subject to become distorted. If this
happens, try shooting with F CS (Full pixels Continuous Shutter), which uses the
mechanical shutter only and eliminates the problems caused by the CMOS imaging
element characteristics. Note that the following settings are available when shooting
with F CS.
CS Speed (frames per second): 1 fps, 3 fps, 5 fps, 7 fps, 10 fps
Maximum Number of Shots: 5, 10, 20
Also, note that F CS does not support Prerecord CS.
1.
Set the mode dial to t (Auto).
2.
In the REC mode, press [MENU].
3.
Use [4] and [6] to select the “REC” tab.
4.
Use [8] and [2] to select “CS” and then press [6].
5.
Use [8] and [2] to select “F CS”, and then press [SET].
6.
Press Õ (Continuous Shutter).
• This will display á (F CS) and surround the monitor screen with a yellow
frame. If this does not happen, press Õ again.
7.
Press [SET].
8.
Use [8] and [2] to select the fourth control panel option from the
bottom (F CS fps).
9.
Use [4] and [6] to select the continuous shutter (CS) speed you want
and then press [SET].
Enables specification of the number of CS images recorded per second.
10.
Use [8] and [2] to select the third control panel option from the
bottom (Max CS shots).
55
Snapshot Tutorial
11.
Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation and then press [SET].
12.
Press the shutter button the rest of the way down.
Images continue to be shot as long as you keep the shutter button depressed.
13.
Image recording will stop when you release the shutter button or after
the maximum number of shots is reached.
14.
Save the CS images (page 56).
NOTE
• After shooting a group of images with F CS, it may take a few seconds before the
camera is ready to shoot again.
Specifying the Method for Saving Continuous Shutter Images
Use the procedure below to specify how images should be saved after a High Speed
CS operation.
1.
In the REC mode, press [MENU].
2.
Use [4] and [6] to select the “REC” tab.
3.
Use [8] and [2] to select “Save CS Images”, and then press [6].
4.
Use [8] and [2] to change the setting.
Normal (Batch)
All images that were shot are saved after the continuous shutter operation is
finished.
56
Snapshot Tutorial
Select & Save
After continuous shutter shooting is finished, the shot images are played back
at slow speed so you can select the images you want to save.
• When shooting with Prerecord CS, the first image saved when you press the
shutter all the way is indicated by an “S” mark so you can tell where the
continuous shutter operation started.
Mark
1While the shot images are playing back and an image
appears that you want to save, press the shutter
button. Each image that you select by pressing the
shutter button will have a mark appended to it.
2After selecting all of the images you want to save,
press [MENU].
Buttons Used for Image Selection
[4] [6]
During playback, these buttons change the playback
direction and playback speed.
While playback is paused, these buttons scroll forward or
back.
[SET]
Toggles between pause and play.
Shutter
button
Press all the way down to select an image for saving.
[MENU]
Saves the selected images and exits the image select
operation.
3Use [8] and [2] to select the save method you want and then press [SET].
Save All
: Saves all the images.
Save Selected : Saves selected images.
Back
: Returns to image selection.
Cancel Save : Does not save any of the images.
Always Ask
After continuous shutter shooting is finished, a prompt appears allowing you to
select Normal (Batch) or Select & Save.
Select the save method you want to use and then press [SET].
Save Selected : Saves selected images.
Save All
: Saves all the images.
Cancel Save : Does not save any of the images.
5.
Press [SET] to apply the setting.
57
Snapshot Tutorial
Continuous Shutter Precautions
• You can use the Manual Mode while a continuous shutter mode (High Speed CS,
Normal Speed CS, F CS) is selected. To do so, set the mode dial to “A”, “S”, or “M”.
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With High Speed CS and F CS, exposure and focus for the first image are applied
for successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• With High Speed CS and F CS, the flash setting automatically becomes ? (Flash
Off).
• Zoom is disabled during continuous shutter operations.
• The following image sizes cannot be selected while shooting with High Speed CS:
“RAW+”, “10M”, “3:2”, “16:9”. Entering the High Speed CS mode while any one of
these image sizes is selected will cause the image size setting to change to “9M”
automatically.
• The following image sizes cannot be selected while shooting with the F CS mode:
“RAW+”, “3:2”, “16:9”. Entering the F CS mode while one of the above is selected
will cause the image size setting to change to “10M”.
• The “RAW+” image size setting cannot be selected while shooting with Normal
Speed CS. Entering the Normal Speed CS mode while the “RAW+” image size is
selected will cause the image size setting to change to “10M”.
• With High Speed CS and F CS, the maximum number of images that can be
recorded during each session is limited, regardless of how much memory card
storage capacity is available.
High Speed CS
F CS
Specified maximum number of continuous shutter shots
(Max CS shots)
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Triple Self-time cannot be used in the High Speed CS mode.
• The Self-timer cannot be used in the Prerecord CS mode.
58
Snapshot Tutorial
Recording Movies
To record a movie
The following procedure explains how to record a standard (STD) movie.
See the pages indicated below for more information about movies.
High-definition movie (HD movie): page 62
High speed movie (HS movie): page 62
[0] (Movie)
1.
Set the mode dial to t (Auto).
2.
In the REC mode, set the movie
mode switch to ³ (HD/STD).
3.
Press [MENU].
4.
Use [4] and [6] to select the “Quality” tab.
5.
Use [8] and [2] to select “» Quality” and then press [6].
6.
Use [8] and [2] to select “STD” (Standard),
and then press [SET].
Movie mode
switch
• Recording is performed with an aspect ratio of
4:3, an image size of 640x480 pixels, and a
frame rate of 30 frames per second (STD Movie).
Image size setting cannot be changed.
• The semi-transparent gray frame on the monitor
screen indicates the area that is recorded when
shooting a movie. The area within the frame is
recorded for a movie.
7.
Press [0] (Movie).
This will start recording and display Y on the
monitor screen.
Movie recording includes stereo audio.
8.
Semi-transparent gray
frame
Remaining recording time
(page 195)
Press [0] again to stop recording.
Movie recording also will stop automatically if
memory becomes full before you press [0].
• The maximum size allowed for a single movie file
is 4GB. Movie recording stops automatically
when a file becomes 4GB.
59
Recording time
Recording Movies
Shooting with BEST SHOT
With BEST SHOT (page 68), you can select the sample scene that matches the type
of movie you are trying to shoot and the camera will change its setup accordingly, for
beautiful movies every time. Selecting the “Natural Green” BEST SHOT scene, for
example, will shot images with vivid green trees and grass.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
HD and STD movie recording (page 95). Note, however, that this does not prevent
image blur due to subject movement.
Audio
Your camera has built-in microphones that can be used to record audio (stereo)
during movie recording.
. Recording Precautions
The camera also records audio. Note the following points when
Microphones
shooting a movie.
– Take care that the microphones are not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to record.
– Operating camera buttons while shooting can cause
button noise to be picked up in the audio.
• When shooting with the “HS” movie mode at a frame rate
setting of “30-120 fps” or “30-240 fps”, audio is recorded only while the camera is
shooting at 30 fps. Audio is not recorded at any other frame rates.
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• Shooting movies for long periods in areas where temperature is relatively high can
cause digital noise (dots of light) to appear in the movie image. A rise in the
camera’s internal temperature also may force movie recording to stop
automatically. If this happens, stop recording and allow the camera to cool down,
which should cause normal operation to resume.
• Shooting a movie using the camera’s built-in memory will cause movie frames to
be dropped. Always use a high speed memory card (not built-in memory) for movie
recording.
• Use of certain types of memory cards slows down data transfer and increases the
time it takes to record movie data, which can result in movie frames being dropped.
The Y indicator on the monitor screen turns yellow to indicate that frames are
being dropped. In order to avoid problems such as these, use of an Ultra High
Speed Type SD memory card is recommended. Note, however that CASIO makes
no guarantees about the operation of any Ultra High Speed Type SD memory card
used with this camera.
60
Recording Movies
NOTE
• Only digital zoom is enabled during HD or STD movie recording. Zoom is disabled
during high speed movie recording. To use optical zoom for HD movie, STD movie,
or high speed movie recording, perform the zoom operation before you press [0] to
start recording.
• The zoom bar is not displayed while movie recording is in progress.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
• Continuous AF is disabled while movie recording is in progress (page 99).
• Face Detection is disabled during movie (HD, STD, high speed) recording.
• During movie (HD, STD, high speed) recording, focus is fixed at the position where
it was when recording started. To focus an image, half-press the shutter button for
Auto Focus or focus manually before you press [0] to start recording.
• You can record with the A (Aperture Priority) mode, S (Shutter Speed Priority), or M
(Manual Exposure) mode even when recording a movie (HD, STD, high speed).
Set the mode dial to “A”, “S”, or “M”, configure exposure settings, and then press
[0] to start recording.
• With high speed movie recording, the exposure is fixed at the value in effect when
recording was started. The exposure value that is applied is affected by selecting
the A, S, or M exposure mode, by the shutter speed, and by the ISO sensitivity (in
case of the M mode only). Note that the setting range of the shutter speed depends
on the current high speed movie recording speed (fps).
• When using the “Prerecord (Movie)” and “For YouTube” BEST SHOT scenes, the
exposure mode is always t (Auto). The A, S, and M exposure modes are
disabled.
• The following BEST SHOT scenes are always shot using high speed movie. The
current movie mode switch setting is ignored.
“Child High Speed Movie”, “Pet High Speed Movie”, “Sports High Speed Movie”
61
Recording Movies
Recording a High-definition Movie
This camera supports recording of high-definition (HD) movies. The aspect ratio of an
HD movie is 16:9, the image size is 1280x720 pixels, and the frame rate is 30 fps.
Image quality and image size settings cannot be changed.
1.
Set the mode dial to t (Auto).
2.
In the REC mode, set the movie mode switch to ³ (HD/STD).
3.
Press [MENU].
4.
Use [4] and [6] to select the “Quality” tab.
5.
Use [8] and [2] to select “» Quality” and then press [6].
6.
Use [8] and [2] to select “HD”, and then press [SET].
7.
Record the movie the same way as you would a normal movie (page
59).
Press [0] to start and stop recording.
Recording a High Speed Movie
This camera supports recording of high speed movies at a maximum speed of
1000 fps. The aspect ratio of movies recorded with this mode depends on the frame
rate (recording speed).
• When shooting with the “HS” movie mode at a frame rate setting of “30-120 fps” or
“30-240 fps”, audio is recorded only while the camera is shooting at 30 fps. Audio is
not recorded at any other frame rates.
1.
Set the mode dial to t (Auto).
2.
In the REC mode, set the movie mode switch to © (HS).
3.
Press [MENU].
4.
Use [4] and [6] to select the “Quality” tab.
62
Recording Movies
5.
Use [8] and [2] to select “HS » Speed” and then press [6].
6.
Use [8] and [2] to select the frame rate (recording speed) you want
and then press [SET].
A fast frame rate (such as 1000 fps) will result in a smaller image size.
7.
Frame Rate
Image Size (Pixels)
120 fps
640x480
240 fps
448x336
420 fps
224x168
1000 fps
224x64
30-120 fps
640x480
30-240 fps
448x336
* fps (frames per second) is
a unit of measurement
indicating the number of
images recorded or
played back per second.
Record the movie the same way as you would a normal movie (page
59).
Press [0] to start and stop recording.
• When “30-120 fps” or “30-240 fps” is selected as the frame rate, recording
always starts with a frame rate of 30 fps. You can switch the frame rate
between 30 fps and 120 fps or between 30 fps and 240 fps only while recording
is in progress. Audio is recorded only while shooting at a 30 fps. Use [4] and
[6] or press [SET] to switch speeds.
NOTE
• The higher the frame rate (speed), the more lighting is required when shooting.
When shooting a high speed movie, shoot in a well-lit environment.
• When recording certain types of movies, the image that appears on the monitor
screen may be smaller than normal. When recording a high speed movie, there are
black bands along the top, bottom, left, and right of the screen.
• When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
• Monitor screen content switching is disabled during high speed movie recording.
63
Recording Movies
Using Prerecord Movie (Prerecord (Movie))
With this feature, the camera pre-records up to five seconds of whatever is happening
in front of the lens in a buffer that is continually updated. Pressing [0] saves the
pre-recorded action (buffer contents) followed by real-time recording. Real-time
recording continues until you stop it. Prerecord Movie can be used when shooting a
standard (STD) movie, a high-definition (HD) movie, or a high speed (HS) movie.
• When using Prerecord Movie in combination with high speed movie, the buffer will
store two seconds of pre-recording instead of the usual five.
[0]
[0]
Movie
Real-time recording start
Real-time recording end
5-second prerecorded part (from the buffer)
* Approximately two seconds for high speed movie
. To set up the camera to shoot with Prerecord Movie
1.
In the REC mode, select the movie mode you want to use by setting the
movie mode switch to ³ (HD/STD) or © (HS).
2.
Set the mode dial to b.
3.
Press [SET].
4.
Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and
then press [SET].
This causes ‰ (Prerecord (Movie)) to appear on the monitor screen, indicating
that the camera is prerecording to its buffer.
64
Recording Movies
. To shoot a Prerecord Movie
1.
After using the above procedure to set up the camera for Prerecord
Movie, point the camera at the subject.
2.
When you are ready to record, press [0].
This will save the approximately five seconds of action that was prerecorded in
the buffer before you pressed [0] (two seconds if you are using high speed
movie) and start real-time recording.
3.
Press [0] again to stop recording.
• To turn off Prerecord Movie recording, set the mode dial to t (Auto).
• When shooting with the high speed movie “30-120 fps” and “30-240 fps”
setting, you cannot change the speed (fps) setting while the camera is prerecording to the buffer in step 1 of the above procedure. You can change the
speed (fps) setting after you press [0] to start real-time recording.
NOTE
• While the camera is set up for shooting with Prerecord Movie, pressing the shutter
button will not shoot a snapshot unless movie recording is in progress. With highdefinition (HD) and standard (STD) movie, you can shoot still images while realtime
movie recording is in progress.
• When shooting with Prerecord Movie in combination with high speed movie,
pressing the [4] or [6] key will not change the EV shift or white balance setting,
even if “EV Shift” or “White Balance” is assigned for the “L/R Key” function. To
change the EV shift or white balance setting in this case, use the control panel.
B
65
Recording Movies
Recording a Movie for YouTube (For YouTube)
The “For YouTube” scene records movies in a format that is optimal for uploading to
the YouTube movie site, which is operated by YouTube, LLC. “For YouTube” can be
used when shooting a standard (STD) movie, a high-definition (HD) movie, or a high
speed (HS) movie.
1.
In the REC mode, set the movie mode switch to ³ (HD/STD) or ©
(HS).
Select the movie mode you want to use.
2.
Set the mode dial to b.
3.
Press [SET].
4.
Use [8], [2], [4], and [6] to select the “For YouTube” scene and then
press [SET].
This causes Ê to appear on the monitor screen.
5.
Record the movie.
The movie file will be stored in a camera folder named “100YOUTB”.
• Installing YouTube Uploader for CASIO from the CD-ROM that comes with
your camera simplifies uploading of movie files you recorded with the “For
YouTube” scene to YouTube (page 148).
• To exit “For YouTube”, set the mode dial to t (Auto).
NOTE
• Movies recorded with the “For YouTube” scene are stored in a special folder to
make them easy to locate for uploading (page 159). “For YouTube” movies are
shot using the image size, recording speed, and quality settings configured in the
Movie Mode (page 59).
• Snapshots cannot be shot (regardless of whether you are recording or not) while
the “For YouTube” scene is selected.
66
Recording Movies
Shooting a Snapshot while Shooting a Movie
1.
While a movie is being recorded,
press the shutter button.
Movie recording continues after the
snapshot is recorded.
Number of recordable snapshots
NOTE
• You can shoot up to 10 snapshots per movie. The number of snapshots is also
limited by the amount of free space available on the memory card.
• Note that the flash cannot be used when shooting a Snapshot in Movie.
• A snapshot cannot be shot during recording of the following types of movies.
High speed movie, some BEST SHOT scenes (Child High Speed Movie, Pet High
Speed Movie, Sports High Speed Movie, For YouTube)
• You cannot use Snapshot in Movie to shoot a snapshot when recording with
“Prerecord (Movie)” while the movie is being pre-recorded to the buffer before you
press [0]. You will be able to shoot snapshots during real-time movie recording,
which starts when you press [0].
• The size of the snapshot is “2M” if any one of the following settings is selected as
the image size before movie recording is started: “10M”, “3:2”, “16:9”, “9M”, “7M”,
“4M”, “2M”. If “VGA” is selected as the image size, the size of the snapshot is
“VGA”.
• The shooting range when shooting a snapshot while movie recording is in progress
is narrower than that of the Single Shot Mode.
• Snapshots shot with Snapshot in Movie cannot be focused individually. The focus
will be the same as the movie being recorded.
67
Recording Movies
Using BEST SHOT
What is BEST SHOT?
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
Some Sample Scenes
Portrait
High Speed
Night Scene
Scenery
High Speed
Night Scene and
Portrait
To shoot with BEST SHOT
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
This will display a menu of BEST SHOT scenes.
• The initial default selection is “Expression CS”.
3.
b
Use [8], [2], [4], and [6] to move the
boundary to the scene you want to select.
• The scene menu has multiple pages. Use [8]
and [2] to scroll between menu pages.
• You can access information about the
currently selected scene. See page 69 for
details.
• To return to normal snapshot recording, set
the mode dial to t (Auto).
Currently selected scene
(with boundary)
Scene name
Scene number
68
Using BEST SHOT
4.
Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
• The settings of the scene you selected remain in effect until you select a
different scene.
• To select a different BEST SHOT scene, repeat the above procedure from
step 2.
5.
Press the shutter button (if you are shooting a snapshot) or [0] (if you
are shooting a movie).
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then slide the zoom controller in
either direction.
• To return to the scene menu, slide the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET]. To return to the scene
information screen for the currently selected BEST SHOT scene, press [SET]
again.
69
Using BEST SHOT
. BEST SHOT Precautions
• BEST SHOT scene images were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Snapshot shooting is disabled while the following BEST SHOT scenes are being
used.
“Child High Speed Movie”, “Pet High Speed Movie”, “Sports High Speed Movie”,
“Prerecord (Movie)”, “For YouTube”
• Movie recording is disabled while the following BEST SHOT scenes are being
used.
“Lag Correction”, “High Speed Lighting”, “High Speed Anti Shake”, “High Speed
Best Selection”, “Multi-motion Image”, “Move Out CS”, “Move In CS”
• Normal Speed CS and F CS shooting is disabled while the following BEST SHOT
scenes are being used. High Speed CS is always used with these scenes.
“Expression CS”, “Baby CS”, “Child CS”, “Pet CS”, “Sports CS”
• HD movie and STD movie recording are disabled (and high speed movie is always
enabled) while the following BEST SHOT scenes are being used.
“Child High Speed Movie”, “Pet High Speed Movie”, “Sports High Speed Movie”
• Shooting with a BEST SHOT scene automatically shoots with the mode setting that
is configured for that scene, regardless of whether the camera’s current REC mode
setting is Single Shot or continuous shutter (CS) setting.
• The “10M”, “3:2”, “16:9” image sizes cannot be selected while shooting with some
BEST SHOT scenes*. Selecting some BEST SHOT scenes* while any one of
these image sizes is selected will cause the image size setting to change to “9M”
automatically.
* “High Speed Anti Shake”, “High Speed Night Scene”, “High Speed Night Scene
and Portrait”, “Move Out CS”, “Move In CS”, “Multi-motion Image”, “High Speed
Best Selection”, “Lag Correction”, “High Speed Lighting”, “Expression CS”,
“Baby CS”, “Child CS”, “Pet CS”, “Sports CS”
• When the movie mode is HD/STD, movies are recorded using the settings of the
selected BEST SHOT scene. For high speed movie recording, BEST SHOT scene
settings are ignored and movie recording is performed as it normally is.
70
Using BEST SHOT
Creating Your Own BEST SHOT Setups
You can save up to 999 camera setups as user BEST SHOT scenes for instant recall
whenever you need them.
1.
On the BEST SHOT scene menu, select the scene named BEST SHOT
(Register User Scene).
2.
Use [4] and [6] to select the snapshot whose setup you want to save.
3.
Use [8] and [2] to select “Save”, and then press [SET].
Your BEST SHOT scene will be assigned the name “Recall User Scene”, along
with a scene number.
NOTE
• You can create BEST SHOT setup for snapshots only. You cannot create a movie
BEST SHOT setup.
• You can check the settings of the currently selected BEST SHOT scene by
displaying the camera’s setting menus and looking at its settings.
• User snapshot scenes are assigned numbers in the sequence: U1, U2, and so on.
• The following are the settings that are saved for each user snapshot BEST SHOT
scene.
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting,
Flash Intensity, Color Filter, Sharpness, Saturation, Contrast
• User BEST SHOT scenes are stored in built-in memory (page 159) in the SCENE
folder (snapshots).
• Formatting the camera’s built-in memory (page 170) deletes all user BEST SHOT
scenes.
• Use the following procedure when you want to delete a user BEST SHOT scene.
1 Display the information screen (page 69) of the user BEST SHOT scene you
want to delete.
), select “Delete”, and then press [SET].
2 Press [2] (
71
Using BEST SHOT
Shooting with High Speed Night Scene
(High Speed Night Scene/High Speed Night Scene and
Portrait)
With High Speed Night Scene and High Speed Night Scene and Portrait, the camera
detects automatically whether it is being hand-held or on a tripod. If the camera
detects it is being hand-held, pressing the shutter button will record a series of
images and combine them in a way that minimizes image blur due to low light
conditions. If the camera detects it is on a tripod, it will shoot a single image using a
longer exposure time (instead of shooting and combining multiple images), which
results in an even clearer image. The flash is always disabled while “High Speed
Night Scene” is selected. If the night scene image you are shooting includes people,
use the “High Speed Night Scene and Portrait” BEST SHOT scene. The flash mode
setting becomes > (Auto Flash) when shooting with “High Speed Night Scene and
Portrait”.
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select “High Speed Night Scene” or “High Speed Night Scene and
Portrait” and then press [SET].
4.
When you are ready to shoot, press the shutter button.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears.
72
Using BEST SHOT
NOTE
• When holding the camera by hand while shooting with these BEST SHOT scenes,
make sure that the subjects remain as still as possible as the camera shoots the
series of images.
• Even when holding the camera by hand while shooting with “High Speed Night
Scene and Portrait”, under certain conditions the camera may shoot only a single
image instead of a series of images.
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• Movement while the camera is mounted on a tripod may cause the camera to
erroneously judge it is being hand held.
• If surroundings are extremely dark when shooting with “High Speed Night Scene”
or “High Speed Night Scene and Portrait”, the camera may not be able to shoot at
proper brightness due to insufficient exposure.
• When shooting with these BEST SHOT scenes, the “ISO Sensitivity” setting is fixed
at “AUTO”.
73
Using BEST SHOT
Shooting with High Speed Anti Shake
(High Speed Anti Shake)
When you press the shutter button while High Speed Anti Shake is enabled, the
camera records multiple images and automatically combines them in a way that
produces a final image with minimal blur. You can shoot with this feature to minimize
the effects of camera movement when shooting with optical anti shake does not
produce the desired results.
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select “High Speed Anti Shake” and then press [SET].
4.
When you are ready to shoot, press the shutter button.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• High Speed Anti Shake may not operate properly resulting in blurred images if the
camera is moved more than the allowable range or if the subject moves during
shooting.
• When shooting with this BEST SHOT scene, the “ISO Sensitivity” setting is fixed at
“AUTO”.
74
Using BEST SHOT
Digitally Correcting for Overexposure and Underexposure
(High Speed Lighting)
This BEST SHOT scene shoots a series of CS images using different exposure
settings and combines them into a final image to correct for overexposure or
underexposure of subjects of differing brightness.
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select “High Speed Lighting” and then press [SET].
4.
Press the shutter button to shoot.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• With this BEST SHOT scene, proper image combination will not be possible if a
subject is moving during shooting.
• With this BEST SHOT scene, the current Lighting setting (page 106) is ignored.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
75
Using BEST SHOT
Configuring the Camera to Help You Better Time Your Shots
(Lag Correction)
There always is some unavoidable time lag between the point you press the shutter
button and the point that the image is actually recorded. The “Lag Correction” feature
lets you configure the camera to lessen or even eliminate this lag to help you better
time your shots and get exactly the moment you want. With “Lag Correction”, you
half-press the shutter button and compose the image you want to shoot. Then when
you full-press the shutter button, the camera pre-records a total of 5 images, including
four images of action that happened before you fully pressed the shutter button. After
that, you can view the images on the monitor screen and select the one you want to
keep.
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select “Lag Correction” and then press [SET].
4.
With the camera pointed at the subject, half-press and hold the shutter
button.
The camera will start pre-recording images at this time.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
5.
When you are ready to shoot, press the shutter button all the way
down.
After pre-recording is complete, one of the five images will appear on the monitor
screen for about three seconds.
6.
If you want to view all five of the pre-recorded images, press [SET]
within about three seconds after a recorded image appears on the
monitor screen.
• If you do not press [SET] within three seconds, the image displayed in step 5
will be saved automatically as the final image.
76
Using BEST SHOT
7.
Use [4] and [6] to scroll through the pre-recorded images on the
monitor screen.
Use [4] and [6] to scroll through the pre-recorded images. Each image appears,
along with an indication of the timing when it was pre-recorded.
–0.4 sec.
–0.3 sec.
–0.2 sec.
–0.1 sec.
SHUTTER
(0.4*)
(0.3*)
(0.2*)
(0.1*)
(Full-press)
* Seconds prior to full-press of shutter button.
• The timing of the image you select here will be the timing of the image
displayed first in step 5 the next time you perform the above procedure. If you
select the image that was pre-recorded 0.3 seconds prior to full-press of the
shutter button, for example, the –0.3-second image will be displayed in step 5
the next time you perform the above procedure.
8.
To save the currently displayed image as the final images, press [SET].
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• The Self-timer cannot be used with this BEST SHOT scene.
• With this BEST SHOT scene, half-pressing the shutter button fixes focus and
exposure at their current levels.
• With this BEST SHOT scene, image recording will not be successful if you fullpress the shutter button without allowing enough time (at least 0.4 seconds) after
half-pressing it.
• Pay close attention to the subject when shooting. Failure to do so can cause
considerable lag from the instant you want to shoot until you actually full-press the
shutter button. This can cause image recording to be too late, even if you use this
function.
• The current “Review” setting (page 103) is ignored when shooting with this
function. Immediately after you full-press the shutter button, one of the five prerecorded images will appear on the display as in step 5 of the above procedure.
77
Using BEST SHOT
Isolating Moving Subjects (Multi-motion image)
Multi-motion image can be used to isolate a moving subject
within a series of multiple images and place them against a
stationary background. Use a tripod or some other means
to make sure that the camera is not moving or shaking
when shooting with Multi-motion image.
Basic Multi-motion image Procedure
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select “Multi-motion Image” and then press [SET].
4.
Hold down the shutter button to record.
5.
Release the shutter button.
Continuous Shutter shooting will stop and the resulting composite image will
appear on the monitor screen.
• The above procedure shoots multiple images and combines them
automatically into a final image. Do not move the camera until shooting is
complete.
• You can configure the maximum number of CS shots, the CS fps, and
Prerecord CS shots settings the same way as you configure the High Speed
CS setting (page 51). Note, however, that the maximum number of CS shots
for “Multi-motion Image” is 28 instead of 30.
78
Using BEST SHOT
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• The Self-timer cannot be used with this BEST SHOT scene.
• Shooting with “Multi-motion Image” assumes that the subject is moving and
changing positions. Trying to use it to shoot a subject that is moving while
maintaining the same location (such as a golf swing, a baseball swing, etc.) will
cause an error message to appear on the monitor screen and failure of image
recording, or will produce an image in which the shots of the subject are arranged
incorrectly.
• Multi-motion will not operate correctly if you shake or move the camera along with
the movement of the subject.
• If an error message appears on the monitor screen, either secure the camera so it
does not move or shoot against a different type of background.
• If not enough CS images are recorded, an error will be displayed before the
camera starts to place the isolated subject onto the stationary background. This
can be caused if you release the shutter button too soon when recording the
moving subject. Keep the shutter button fully depressed long enough to allow
recording of more images.
• Choose a shooting angle so the colors, shapes, and patterns of the moving subject
and the background are as different as possible.
• Avoid a shooting angle where the background is monotone or mono-pattern (such
as a clear blue sky).
• The camera may not be able to compose the final image if the intervals between
movements are so narrow the subject shots overlap. If this happens, increase the
interval by using the control panel to select a slower “High Speed CS fps” setting
(page 51).
79
Using BEST SHOT
Shooting with Priority on Subject Faces
(High Speed Best Selection)
With High Speed Best Selection, the camera automatically shoots a series of images,
and selects the best one based on facial image blur, and facial expression (whether
the subject is smiling or blinking).
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select “High Speed Best Selection” and then press [SET].
4.
Press the shutter button to shoot.
• This will cause the message “Busy... Please wait...” to appear. Do not move
the camera while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• If one or more of the faces are blurred in all of the images that are shot, they will be
blurred in the final image as well.
• The following conditions may make it impossible for the camera to determine if the
subject is blinking or smiling. This may result in a final image in which the subject is
blinking or not smiling.
– Faces that are partially or completely darkened by shadows, etc.
– Hair that is hiding or near the eyes
– Eye glasses
– Small faces
– Faces that are not looking directly at the camera
• Shooting a large group of people will cause processing of the image after shooting
to take longer.
80
Using BEST SHOT
Shooting an Image in Accordance with Subject Movement
(Move Out CS/Move In CS)
You can use these features to shoot an image automatically whenever the subject
moves into or moves out of a frame on the monitor screen. You also can configure the
camera to record images of what happened immediately before and after the subject
moves.
Move Out CS
Automatically records what happened immediately before and
after the subject moves outside of a boundary on the monitor
screen.
Move In CS
Automatically records what happened immediately before and
after the subject moves into a boundary on the monitor screen.
. To setup the camera
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select “Move Out CS” or “Move In CS” and then press [SET].
4.
Use [2] to select the fifth control panel option from the top
(boundary location), and then press [SET].
5.
Configure the boundary location and size
settings.
[8] [2] [4] [6]
Moves the boundary.
Zoom controller
Resizes the boundary.
6.
Press [SET].
7.
Press [2].
8.
Use [8] and [2] to select the fourth control panel option from the
bottom (High Speed CS fps).
Boundary
81
Using BEST SHOT
9.
Use [4] and [6] to select the continuous shutter
(CS) speed you want and then press [SET].
CS speed
AUTO
The camera measures light levels and configures the fastest
possible CS speed setting automatically.
1 to 40 fps
Enables specification of the number of CS images recorded per
second.
10.
Use [8] and [2] to select the third control panel
option from the bottom (Max CS shots).
11.
Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation and then press [SET].
12.
Use [8] and [2] to select the second control panel option from the
bottom (Prerecord CS shots).
13.
Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• You cannot set a value of “0” for the number of Prerecord CS buffer images.
Shutter button full-press
Number of pre-record
images and pre-record time
(Not displayed when “AUTO”
is selected for “High Speed
CS fps”.)
14.
Number of remaining images
and remaining recording
time after the shutter button
full-press (Not displayed
when “AUTO” is selected for
“High Speed CS fps”.)
Use [8] and [2] to select the bottom control panel option (Trigger
Sense).
82
Using BEST SHOT
15.
Use [4] and [6] to select the subject movement sensitivity, and then
press [SET].
• You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.
• Move Out CS Setting Guide
High : For a subject that moves out of the boundary quickly
Low : For a subject that moves out of the boundary slowly
• Move In CS Setting Guide
High : For a subject that moves into the boundary quickly or for a small subject
(relative to the boundary)
Low : For a subject that moves into the boundary slowly or for a large subject
(relative to the boundary)
• The approximate number of recordable CS
Number of recordable
images will appear on the monitor screen.
CS images
Remaining snapshot
memory capacity
. To shoot using Move Out CS
1.
Compose the image so the subject is within the boundary on the
monitor screen.
2.
Half-press the shutter button.
• The camera will adjust exposure and focus automatically.
3.
When the boundary on the monitor screen turns
green, press the shutter button the rest of the
way down.
At this time the camera will go into recording standby
and start pre-recording images and storing them in a
buffer, in accordance with the Prerecord CS shots
setting you configured in step 13 under “To setup the
camera” on page 81. After the buffer becomes full, new images keep being added
while older images are continually being deleted.
The camera will start saving images automatically the moment it detects that the
subject has moved out of the boundary.
• “0 AUTO” flashes on the monitor screen during recording standby and auto
recording.
83
Using BEST SHOT
4.
Image recording will continue until the end of the recording time is
reached.
• While the camera is in Move Out CS recording standby, you can cancel
standby by pressing the shutter button all the way down. You then will be able
to shoot images normally.
• To stop an ongoing real-time recording operation, press [SET].
5.
Save the CS images (page 56).
. To shoot using Move In CS
1.
Compose the image at a location where you expect the subject to enter
the boundary on the monitor screen.
2.
Half-press the shutter button.
• The camera will adjust exposure and focus automatically.
• In this case, use of manual focus (page 91) to preset a fixed focus is
recommended.
3.
When the boundary on the monitor screen turns
green, press the shutter button the rest of the
way down.
At this time the camera will go into recording standby
and start pre-recording images and storing them in a
buffer, in accordance with the Prerecord CS shots
setting you configured in step 13 under “To setup the
Boundary
camera” on page 81. After the buffer becomes full, new
images keep being added while older images are
continually being deleted.
The camera will start saving images to memory automatically the moment it
detects the subject has moved into the area within the boundary.
• “0 AUTO” flashes on the monitor screen during recording standby and auto
recording.
4.
Image recording will continue until the end of the recording time is
reached.
• While the camera is in Move In CS recording standby, you can cancel standby
by pressing the shutter button all the way down. You then will be able to shoot
images normally.
• To stop an ongoing real-time recording operation, press [SET].
84
Using BEST SHOT
5.
Save the CS images (page 56).
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• The Self-timer cannot be used with this BEST SHOT scene.
• Compose the image so the entire subject and its background are within the
boundary. Recording may not be performed correctly if there is little difference
between the subject and the part of the background enclosed by the boundary.
Also, Move Out CS may not record correctly if the subject is not in the center of the
boundary.
• Move In CS and Move Out CS do not operate correctly if you press the shutter
button all the way down. Be sure to half-press the shutter button. After images are
pre-recorded, press the shutter button the rest of the way down.
• After pressing the shutter button all the way to put the camera into record standby,
keep the camera still. Recording may not be performed correctly if you move the
camera during record standby.
• The sleep mode and Auto Power Off are disabled while the camera is in record
standby.
• The camera may not start recording automatically or camera power may turn off
when battery power is low. Always make sure that the battery is sufficiently
charged before using these features.
• To save all of the continuous shutter images, select “Save All” (page 56) as the
continuous shutter image save method. If you do, make sure that the memory card
loaded in the camera has enough free space to store them.
• Zoom is disabled, and focus and exposure are fixed while the camera is in
recording standby.
85
Using BEST SHOT
Using the Situation-specific CS Scenes
The High Speed CS capabilities provide you with a variety of BEST SHOT options to
suite exactly the type of image you are trying to record. Images continue to be shot as
long as you keep the shutter button depressed, with the shooting speed optimized
according to the BEST SHOT scene you are using.
Prerecord CS (page 51) pre-records images when you half-press the shutter button.
Then when you press the shutter button the rest of the way down, the camera stores
what is currently in the buffer and starts real-time continuous shutter shooting of new
images. Shooting continues until you release the shutter button or until a total of up to
30 images (buffer images plus new images) are shot. Some of the 30 images are of
action that occurred before you full-pressed the shutter button and some are after.
This helps to ensure you capture exactly the moment you want, even if your timing is
slightly off.
Shutter button half-press
Shutter button full-press
Shutter button release
Recorded images (up to 30 images)
Continuous recording of images until
shutter button released*
Pre-recorded images
* You can record up to 30 images (pre-recorded buffer images plus real-time images) for
each Prerecord CS operation.
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select the BEST SHOT scene you want to use and then press [SET].
The following are the settings for each BEST SHOT scene.
Scene Name
CS fps
Maximum CS Shots Pre-recorded Shots
Expression CS
3 fps
10 (3.3 seconds)
3 (1 second)
Baby CS
5 fps
10 (2 seconds)
3 (0.6 seconds)
Child CS
10 fps
20 (2 seconds)
5 (0.5 seconds)
Pet CS
15 fps
30 (2 seconds)
5 (0.3 seconds)
Sports CS
30 fps
30 (1 second)
10 (0.3 seconds)
* You can change the above settings if you want. See page 51 for details.
86
Using BEST SHOT
4.
Half-press and hold the shutter button to start pre-recording of images.
A preset number of images are pre-recorded. The pre-recorded images are
continually updated until you full-press the shutter button.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
• The camera will not emit shutter sounds as it pre-records images.
5.
Press the shutter button the rest of the way down.
This will save the pre-recorded images and start shooting new images in realtime. Images continue to be shot as long as you keep the shutter button
depressed.
6.
Shooting will stop when you release the shutter button or after the
maximum number of shots is reached.
7.
Save the CS images (page 56).
NOTE
• CS settings (“High Speed CS”, “Normal Speed CS”, “F CS”) are disabled and will
always be recorded as High Speed CS shots. Control panel operations, recording,
and precautions are the same as those that apply to High Speed CS (page 51).
Note, however, that the A, S, and M exposure modes cannot be used.
• Prerecord CS (pre-recording of images before the shutter button is full-pressed) is
not performed if you full-press the shutter button without half-pressing first.
Whenever possible, be sure to half-press the shutter button, compose the image,
and then full-press the shutter button.
87
Using BEST SHOT
Using the Situation-specific High Speed Movie Scenes
The High Speed Movie capabilities of the camera provide you with a variety of BEST
SHOT options to suite exactly the type of image you are trying to record.
1.
In the REC mode, set the mode dial to b.
2.
Press [SET].
3.
Select the BEST SHOT scene you want to use and then press [SET].
Scene Name
Frame Rate
Child High Speed Movie
120 fps
Pet High Speed Movie
240 fps
Sports High Speed Movie
420 fps
• You also can change the frame rate, if you want (page 63).
4.
Record the movie the same way as you would a normal movie (page
59).
Press [0] to start and stop recording.
• To return to normal snapshot recording, set the mode dial to t (Auto).
NOTE
• These BEST SHOT scenes always shoot using high speed movie. The current
movie mode switch setting is ignored.
• Precautions and the shooting procedure are the same as those for High Speed
Movie recording (page 62), except that the following functions are disabled.
– A, S, M exposure mode settings
– Prerecord Movie
– YouTube movie recording
88
Using BEST SHOT
Advanced Settings
The following are menu operations you can use to configure various camera settings.
Using On-screen Menus
. Example Menu Screen Operation
1.
In the REC mode, press [MENU].
[8] [2] [4] [6]
This will display the menu screen.
• Menu contents are different in the REC
mode and PLAY mode.
2.
Use [4] and [6] to select the tab where
the item you want to configure is located.
3.
Use [8] and [2] to select the menu item
you want, and then press [6].
4.
Use [8] and [2] to change the setting.
5.
After the setting is the way you want,
press [SET].
• Pressing [4] registers the selected setting
and returns to the menu.
• To configure settings on another tab after
pressing [4] to return to the menu, use [8]
to move the highlighting up to the tabs, and
then use [4] and [6] to select the tab you
want.
• Pressing [MENU] interrupts the menu
operation and exits the menu screen.
89
[MENU] [SET]
Example:
When “Self-timer” is
selected on the “REC” tab
Tabs
Items
Advanced Settings
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same as the one described under “Example Menu Screen Operation”
on page 89.
Use [4] and [6] to select the “REC” tab.
Procedure
[r] (REC) * [MENU] * REC Tab * Self-timer
Press
[r] (REC).
Press
[MENU].
Use [8] and [2] to select “Self-timer” and
then press [6].
90
Advanced Settings
REC Mode Settings (REC)
Selecting a Focus Mode (Focus)
Procedure
[r] (REC) * [MENU] * REC Tab * Focus
Settings
Q Auto
Focus
Type of Shot
General
recording
Focus Mode
Snapshot Movies
Automatic
Fixed
focal
point
´
Macro
Close ups
)
Infinity
Scenery and
other distant
subjects
W
Manual
Focus
When you want
to focus
manually
Automatic
Approximate Focus Range*1
Snapshot
Fixed
Approximately
distance
7 cm to 50 cm
*2
(2.8" to 19.7")
(First step zoom from
the Widest Angle
setting)
Fixed
Manual
Movies
Approximately 15 cm
to 9 (infinity)
(5.9" to 9)
(Wide Angle)
Infinity
Approximately 15 cm to
9 (infinity)*2 (5.9" to 9)
*1 The focus range is the distance from the lens surface.
*2 The focus range depends on the current optical zoom position.
91
Advanced Settings
To focus with manual focus
1.
On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2.
Watching the image on the monitor screen use
[4] and [6] to adjust focus.
• At this time the image that is within the boundary
will enlarge and fill the monitor screen, which aids
in focusing. If you do not perform any operation for
two seconds while the enlarged image is displayed,
the screen in step 1 will re-appear.
Yellow boundary
NOTE
• An Auto Macro feature detects how far the subject is from the lens and
automatically selects either Macro Focus or Auto Focus accordingly.
• Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
• In the case of movie recording, Auto Macro operates before you start recording.
After recording is started, however, focus is fixed.
• Whenever you perform an optical zoom operation while shooting with Auto Focus,
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell
you the focus range, as shown below. Note that the focus range is displayed
including the Auto Macro range only when shooting with Auto Focus.
Example: oo cm to 9
* oo is the actual focusing range value.
• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page
101) are disabled while Manual Focus is selected as the focus mode.
• Turning on “Face Detection” causes the focus mode to change automatically to Q
(Auto Focus). Changing the focus mode setting to anything other than Q (Auto
Focus) causes “Face Detection” to turn off automatically.
92
Advanced Settings
Using Focus Lock
Subject to be focused on
“Focus lock” is a technique you can use when you want to
compose an image in which the subject you want to focus
on is not within the focus frame in the center of the
screen.
• To use focus lock, select “U Spot” or “O Tracking” for
the Auto Focus area (page 96).
1.
Align the monitor screen’s focus frame with
the subject you want to focus on and then halfpress the shutter button.
2.
Keeping the shutter button half-pressed
(which maintains the focus setting), move the
camera to compose the image.
Focus frame
• When “O Tracking” is selected as the Auto Focus
area, the focus frame will move automatically and
follow the subject.
3.
When you are ready to shoot the image, press the shutter button the
rest of the way down.
NOTE
• Focus lock also locks exposure (AE).
93
Advanced Settings
Using the Self-timer (Self-timer)
Procedure
[r] (REC) *[MENU] * REC Tab * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
„ 10 sec
10-second Self-timer
‚ 2 sec
2-second Self-timer
• When shooting under conditions that slow down the shutter speed,
you can use this setting to prevent image blur due to camera
movement.
” X3
(Triple
Self-timer)
Shoots three images: one image 10 seconds after the shutter button
is pressed, and the next two images as soon as the camera is ready
after shooting the previous image. How long it takes for the camera to
get ready to shoot depends on the image size and quality settings,
whether or not a memory card is loaded in the camera, and the flash
charge condition.
Off
Self-timer is disabled.
• The front lamp flashes while the Self-timer countdown is in
progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
Front lamp
NOTE
• The Self-timer cannot be used together with the following features.
High Speed CS with Prerecord CS, some BEST SHOT scenes (Prerecord (Movie),
Move Out CS, Move In CS, Multi-motion Image, Lag Correction, Expression CS,
Baby CS, Child CS, Pet CS, Sports CS)
• The Triple Self-timer cannot be used together with the following features.
High Speed CS, Normal Speed CS, F CS, Movie, some BEST SHOT scenes (High
Speed Best Selection, For YouTube)
94
Advanced Settings
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
D Auto
Minimizes the effects of camera and subject movement
A Camera AS
Minimizes the effects of camera movement only
S Image AS
Minimizes the effects of subject movement only
F DEMO
Half-pressing the shutter button demonstrates the effect of “A
Camera AS”. However, the image is not recorded.
Off
Turns off all Anti Shake settings
NOTE
• “A Camera AS” only can be selected while recording with High Definition (HD)
and Standard (STD) movie.
• “S Image AS” is disabled while “S” or “M” is selected as the exposure mode.
• The ISO sensitivity setting (page 41) must be “AUTO” for “S Image AS” to work.
• Anti Shake is not supported while recording with High Speed Movie.
• Shooting while “D Auto” or “S Image AS” is selected can cause an image to
appear somewhat coarser than normal and can cause slight deterioration of image
resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• “A Camera AS” may not work properly when the camera is mounted on a tripod.
Either turn off Anti Shake or select “S Image AS”.
• When the image size setting is “RAW+” (page 37), this setting becomes “A
Camera AS” when the Anti Shake setting is “D Auto”, and “Off” when the Anti
Shake setting is “S Image AS”.
95
Advanced Settings
Specifying the Auto Focus Area (AF Area)
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “U Spot”.
U Spot
This mode takes readings of a small area in the center of the image.
This setting works well with focus lock (page 93).
I Multi
When you half-press the shutter button while this setting selected, the
camera will select the optimum Auto Focus area from among nine
possible areas. The focus frame of the area where the camera focuses
will be displayed in green.
— Free
You can move the focus frame by using [8], [2], [4], and [6] to move
the focus point and then pressing [SET]. To change the focus point
position, select “— Free” again and then use [8], [2], [4] and [6] to
select the position you want.
O
Tracking
When you half-press the shutter button while this setting is selected, the
focus frame will follow the movement of the subject.
96
Advanced Settings
“U Spot” or “O Tracking”
“I Multi”
Focus frame
Focus frame
“— Free”
*
[SET]
Focus point
Focus frame
• “O Tracking” cannot be used in combination with the following features.
Prerecord CS, Normal Speed CS, some BEST SHOT scenes (Move Out CS, Move
In CS, Multi-motion Image, Lag Correction, Expression CS, Baby CS, Child CS,
Pet CS, Sports CS)
• “— Free” or “I Multi” cannot be selected for the AF area while Face Detection is
enabled.
97
Advanced Settings
Using the Auto Focus Assist Light (AF Assist Light)
Procedure
[r] (REC) * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected
causes the front lamp to light, which provides illumination for
focusing in areas where lighting is dim. Leaving this function
turned off is recommended when shooting portraits from short
distances, etc.
Front lamp
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Shooting with Face Detection (Face Detection)
Procedure
[r] (REC) * [MENU] * REC Tab * Face Detection
When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
1.
Use [4] and [6] to select “On” and then press [SET].
2.
Point the camera at the subject(s).
The camera will detect human faces and display a
frame around each one.
3.
Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
4.
Press the shutter button the rest of the way down.
98
Advanced Settings
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– A face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion Image, For
YouTube, Prerecord (Movie), Lag Correction)
– Movie Mode (Including some BEST SHOT scenes that support High Speed
Movie recording)
– High Speed CS with Prerecord CS (Including some BEST SHOT scenes that
support High Speed CS recording)
• Changing the focus mode setting to anything other than Q (Auto Focus) while
“Face Detection” is turned on causes “Face Detection” to turn off automatically.
Shooting with Continuous Auto Focus (Continuous AF)
Procedure
[r] (REC) * [MENU] * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the
screen. If “— Free” is selected for the “AF Area” setting (page 96) when you halfpress the shutter button, focusing is performed for the area specified by “— Free”.
If “Face Detection” is turned on, focusing is performed in the area where a face is
detected.
99
Advanced Settings
Changing the Continuous Shutter Mode (CS)
Procedure
[r] (REC) * [MENU] * REC Tab * CS
Perform the following steps to change the continuous shutter mode.
Š High Speed CS
Enables shooting of up to 30 continuous shutter images at faster speeds than
Normal Speed CS. See page 51 for details.
Z Normal Speed CS
The number of consecutive images you can shoot is theoretically unlimited, as
long as there is memory available to store them. Also note that the maximum
shooting speed of Normal Speed CS is limited by the type of memory card you
are using and the camera setup. See page 49 for details.
á F CS
Supports continuous shutter recording of up to 20 images, using the mechanical
shutter only. See page 55 for details.
Configuring the Continuous Shutter Image Save Method
(Save CS Images)
Procedure
[r] (REC) * [MENU] * REC Tab * Save CS Images
See page 56 for details.
100
Advanced Settings
Turning Digital Zoom On or Off (Digital Zoom)
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
Select “On” when you want to use digital zoom (page 47).
• Digital zoom is disabled while shooting with the following feature.
– High speed movie recording
– “RAW+” image size
Assigning Functions to the [4] and [6] Keys (L/R Key)
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the seven functions listed below to the [4] and [6] keys.
Setting
[4]/[6] key operation
Q*´*)
Selecting a Focus Mode (page 91)
• W (Manual Focus) cannot be selected.
Metering
Changes the Metering Mode (page 106)
Self-timer
Sets the self-timer time (page 94)
Face Detection
Turns face detection on and off (page 98)
ISO
Specifying ISO Sensitivity (page 41)
White Balance
Adjusting White Balance (page 42)
EV Shift
Correcting Image Brightness (page 43)
Off
Cancels [4] and [6] key assignments
101
Advanced Settings
Shooting with Quick Shutter (Quick Shutter)
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without
waiting for Auto Focus. This will record the image using a high speed focus operation
that is much faster than Auto Focus.
On
Turns on Quick Shutter
• Some images may be out of focus when Quick Shutter is used.
Off
Turns off Quick Shutter so focus is performed using normal Auto Focus
before the image is recorded.
• If you fully press the shutter button while Quick Shutter is turned off,
images will continue to be shot without focusing.
• Whenever possible, take a little extra time to half-press the shutter
button in order to ensure proper focus.
NOTE
• At relatively high zoom factors, Quick Shutter will stop working and the camera will
switch over to standard Auto Focus.
• The Quick Shutter setting is enabled for the second and subsequent images of a
Normal Speed CS group.
Displaying the On-screen Grid (Grid)
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode
monitor screen for easy vertical and horizontal alignment
when composing images.
102
Advanced Settings
Turning on Image Review (Review)
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second
immediately after you press the shutter button to record it.
• Image review is available only when shooting single images. It does not work with
continuous shutter.
Using Icon Help (Icon Help)
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for
certain icons when you switch between REC functions.
Functions Supported by Icon Help
• Exposure mode
• Available options for the “L/R Key” setting
• Exposure warning when shutter button is half-pressed
103
Advanced Settings
Configuring Power On Default Settings (Memory)
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
This setting lets you specify which camera settings should be remembered by the
camera when it is turned off, and restored the next time the camera is turned on. To
have the camera remember a setting, you should enable the setting’s memory. Any
setting whose memory is disabled will be reset to its initial default any time the
camera is turned off.
Setting
Disabled (Initial Default Setting)
Flash
Auto
Focus
Q (Auto Focus)
ISO
Auto
White Balance
Auto WB
EV Shift
0.0
AF Area
Spot
Metering
Multi
Enabled
Setting at
power off
CS
High Speed CS
Self-timer
Off
Flash Intensity
0
Digital Zoom
On
MF Position
Position before manual focus was selected.
Zoom Position*
Full wide
* Optical zoom setting only.
104
Advanced Settings
Image Quality Settings (Quality)
Specifying Snapshot Image Quality (T Quality (Snapshot))
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
Fine
Gives image quality priority
Normal
Normal
Economy
Gives the number of images priority
• The “Fine” setting helps to bring out details when shooting dense tree branches or
leaves, a complex pattern, etc.
• Memory capacity (the number of images you can record) will be affected by the
quality settings you configure (page 194).
Movie Image Quality Settings (» Quality (Movie))
Procedure
[r] (REC) * [MENU] * Quality Tab * » Quality (Movie)
This setting can be used to specify HD or STD as the image quality for movie
recording when HD/STD is selected as the movie mode.
HD
Select this setting record high-definition (HD) movies (page 62). The aspect
ratio of movies recorded with this setting is 16:9.
STD
Use this setting for standard movie recording. Recording with this setting is
performed using an aspect ratio of 4:3, an image size of 640x480 pixels,
and a frame rate of 30 frames per second. Image quality and image size
settings cannot be changed.
105
Advanced Settings
Setting the High Speed Movie Frame Rate (HS » Speed)
Procedure
[r] (REC) * [MENU] * Quality Tab * HS » Speed
See page 62 for details.
Specifying the Metering Mode (Metering)
Procedure
[r] (REC) * [MENU] * Quality Tab * Metering
The metering mode determines what part of the subject is metered for exposure.
B Multi
Multi-pattern metering divides the image into sections and measures
the light in each section for a balanced exposure reading. This type
of metering provides error-free exposure settings for a wide range of
shooting conditions.
N Center
Weighted
Center weighted metering concentrates on the center of the focus
area to measure light. This type of metering is best when you want
some level of control over contrast.
˜ Spot
Spot metering takes readings at a very small area. Use this metering
method when you want exposure to be set according to the
brightness of a particular subject, without being affected by
surrounding conditions.
Optimizing Image Brightness (Lighting)
Procedure
[r] (REC) * [MENU] * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
On
Performs brightness correction.
Off
Does not perform brightness correction.
106
Advanced Settings
Specifying Flash Intensity (Flash Intensity)
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2
(least bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Using Built-in Color Filters (Color Filter)
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Controlling Image Sharpness (Sharpness)
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Controlling Color Saturation (Saturation)
Procedure
[r] (REC) * [MENU] * Quality Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least
saturated).
Adjusting Image Contrast (Contrast)
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and
dark) to –2 (least contrast between light and dark).
107
Advanced Settings
Viewing Snapshots and Movies
Viewing Snapshots
See page 28 for the procedure for viewing snapshots.
Viewing a Movie
1.
Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2.
Press [SET] to start playback.
Movie icon: »
Recording time
Image quality
Movie Playback Controls
Fast forward/fast
reverse
[4] [6] (Playback in progress.)
• Each press of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, press [2].
Play/pause
[SET]
1 frame forward/
back
[4] [6] (Playback paused.)
• Holding down either button scrolls continuously.
Volume adjustment
Press [2] and then press [8] [2]
• Volume can be adjusted only while movie playback is in
progress.
Information display
on/off
[8] (DISP)
Zoom
Slide the zoom controller in the direction of z ([).
• You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. You can zoom a movie
image up to 4.5 times normal size.
Stop playback
[MENU]
• Playback may not be possible for movies not recorded with this camera.
108
Viewing Snapshots and Movies
Viewing Continuous Shutter Images
Each time you perform a continuous shutter (CS) operation, the camera creates a CS
group that includes all of the images for that particular CS session. You can use the
following procedure to play back the images in a particular CS group.
1.
Press [p] (PLAY) and then use [4] and [6] to display the CS group
whose images you want to view.
Number of image files in
the CS group
CS group icon
First image in the CS group
2.
About one second after you select a CS group, high speed playback of
its images will start automatically.
• After playback of a CS Group is complete, the first image of the group will be
displayed on the monitor screen.
• Pressing [SET] will pause playback. While playback is paused, you can adjust
the playback speed, specify the playback direction, scroll forward or back,
zoom images, and delete images.
Current image number/number
of images in the group
CS speed
Playback guide
109
Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to
start image playback.
[4] [6]
During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is
zoomed.
[SET]
Toggles between pause and play.
Zoom
controller
Zooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image on
the monitor screen.
• Sliding the zoom controller towards z ([) while an image is not
zoomed will display a menu of images in the current CS group.
[MENU]
Exits CS group playback.
[8] (DISP)
Cycles through information display formats.
[2]
Displays the “CS Frame Edit” menu.
NOTE
• Multiple images shot using normal-speed continuous shutter are stored individually
and are not grouped. This means they can be displayed individually (page 28) but
not as a CS group.
Deleting Continuous Shutter Images
You can use the following procedures to delete images while playback is in progress
or paused.
. Deleting a Specific CS Group File
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.
Use [8] and [2] to select “Delete” and then press [SET].
110
Viewing Snapshots and Movies
3.
Use [4] and [6] to display the image you want to delete.
4.
Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
. Deleting Multiple Files in a CS Group
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.
Use [8] and [2] to select “Delete” and then press [SET].
3.
Use [8] and [2] to select “Delete Frames” and then press [SET].
• This displays a file selection screen.
4.
Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
5.
Repeat step 4 to select other files, if you want. After you are finished
selecting files, press [MENU].
6.
Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 6 and then press [SET].
111
Viewing Snapshots and Movies
. Deleting All Files in a CS Group
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.
Use [8] and [2] to select “Delete” and then press [SET].
3.
Use [8] and [2] to select “Del Group Images” and then press [SET].
4.
Use [8] and [2] to select “Yes”, and then press [SET].
Dividing Up a CS Group
Use the following to divide up a CS Group into individual images.
. Dividing Up a Specific CS Group
1.
While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2.
Use [4] and [6] to select the “PLAY” tab.
3.
Use [8] and [2] to select “Divide Group” and then press [6].
4.
Use [4] and [6] to display the CS group you want to divide up.
5.
Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
112
Viewing Snapshots and Movies
. Dividing Up All CS Groups
IMPORTANT!
• Once a CS group is divided, it cannot be regrouped.
1.
While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2.
Use [4] and [6] to select the “PLAY” tab.
3.
Use [8] and [2] to select “Divide Group” and then press [6].
4.
Use [8] and [2] to select “Divide All Groups” and then press [SET].
5.
Use [8] and [2] to select “Yes”, and then press [SET].
Copying a CS Group Image
Use the following procedure to copy an image in a CS group to a location outside of
the group.
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.
Use [8] and [2] to select “Copy”, and then press [SET].
3.
Use [4] and [6] to display the image you want to copy.
4.
Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize
113
Viewing Snapshots and Movies
Zooming an On-screen Image
1.
In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2.
Slide the zoom controller towards z ([) to
zoom.
Zoom factor
Image area
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. Slide the zoom controller
towards w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X,
Current display area
certain image sizes may not allow zooming up to
the full 8X.
• Pressing [SET] will lock the current zoom factor for the on-screen image. You
can then use [4] and [6] to scroll between images, using the same zoom
factor. Pressing [SET] again will unlock the zoom factor and allow you to use
[8], [2], [4] and [6] to move around the currently displayed images. This
function cannot be used while viewing CS group images or movies. Also, CS
group images and movies will not appear when you are scrolling images with
[4] and [6].
Displaying the Image Menu
1.
In the PLAY mode, slide the zoom controller
towards w (]).
Boundary
Use [8], [2], [4] and [6] to move the selection
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to
move the selection boundary to the image you want and
then press [SET].
• In the case of a movie or a continuous shutter (CS)
file, the first frame of the file will be displayed.
114
Viewing Snapshots and Movies
Viewing Snapshots and Movies on a TV Screen
1.
Use the AV cable that comes with the camera to connect it to the TV.
White
Yellow
TV
AV cable (bundled)
Red
Video
Terminal cover
Audio
USB/AV port
AUDIO IN jack (red)
AUDIO IN jack (white)
VIDEO IN jack (yellow)
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the AV cable connector,
connect the cable to the camera.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• Make sure that the camera is turned off before plugging
in or unplugging the cable. Check the user
documentation that comes with the TV for information
about requirements before plugging into or unplugging
from the TV.
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
115
Viewing Snapshots and Movies
3.
Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
• Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV
cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 168).
4.
Now you can display images and play back movies as you normally do.
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are
displayed on the TV screen. The camera’s monitor screen will show on-screen
information only (without any movie image).
• Before connecting to a TV to display images, be sure to configure the camera’s
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 167).
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
NOTE
• Audio is stereo.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [8] (DISP) to change the display contents.
116
Viewing Snapshots and Movies
Viewing High-quality Movies on a Hi-Vision Television
Use a commercially available HDMI cable to
connect the camera to the TV. For
information about playback, see page 115.
• Use a commercially available HDMI cable
that is marked with the logo shown to the
right.
HDMI connector
HDMI cable (commercially available)
HDMI output
(Mini)
HDMI input
Terminal
cover
HDMI mini connector
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for snapshot or movie playback, snapshots
or movies can be displayed on the TV screen. The camera’s monitor screen will
show on-screen information only.
• The following are disabled during HDMI connection.
– Image Menu display
– Menu operations (However, slideshow can be played.)
– Delete
– “CS Frame Edit” (CS group content editing) while playback of a CS group is in
progress or paused
– Movie editing while a movie is being played back
117
Viewing Snapshots and Movies
NOTE
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini
connector on one end, and a plug that is compatible with your TV’s HDMI
connector on the other end.
• Proper image and/or audio output and other operations may not be possible with
some devices.
• Connecting the camera to the HDMI connector of another device can damage both
the camera and the other device. Never connect two HDMI output connectors to
each other.
• Make sure that the camera is turned off before plugging in or unplugging the cable.
Check the user documentation that comes with the TV for information about
requirements before plugging into or unplugging from the TV.
• When cables are connected to both the USB/AV port and the HDMI output
connector, the HDMI output connector connection is given priority.
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s
monitor screen may not operate normally while the HDMI cable is connected.
• Audio is stereo.
• Some TVs may not be able to output images and/or audio correctly.
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
118
Viewing Snapshots and Movies
. Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
Auto
This setting will cause the format to change automatically in accordance
with the connected TV. Normally, you should use this mode.
1080i
1080i format output*
480p
480p format output
576p
576p format output
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output
method may be 576p when outputting to a digital TV in a PAL reception area that does
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed
automatically, change the setting to 576p.
• If an image does not appear when “Auto” is selected as the output method, try
changing this setting to something else.
Recording Camera Images to a DVD Recorder or Video Deck
Use the following method to connect the camera to the recording device using the
camera’s bundled AV cable.
– DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN
terminals.
– Camera: Connect the AV cable to the USB/AV port.
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. You can record movies by selecting “» Only” for the slideshow
“Images” setting (page 120).
For information about connecting a monitor to the recording device and about how to
record, see the user documentation that comes with the recording device you are
using.
119
Viewing Snapshots and Movies
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform
other playback operations.
For information about menu operations, see page 89.
Playing a Slideshow on the Camera (Slideshow)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All images except Z: All non-continuous shutter (CS) images
T Only: Snapshots only
» Only: Movies only
One Image: One single selected image (selected using [4] and [6])
Time
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, movies play from beginning to end.
When the slideshow reaches a movie file while “MAX” is selected, only the first
frame of the movie will displayed.
120
Other Playback Functions (PLAY)
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
• Patterns 2 through 4 have different background music, but they all use the
same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for those that
are part of a CS group), and the “Interval” setting is ignored.
• Movies that include audio are played back without background music. Movies
that do not include audio are played back with background music.
• The currently selected image change effect setting is disabled automatically
in following cases.
– When playing a slideshow for which “» Only” or “One Image” is selected
for the “Images” setting
– When the interval setting is “MAX”, 1 second, or 2 seconds
– Before and after playback of a movie
– During CS group playback (Except the Pattern 1 effect)
Off: No image change effect or background music
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one
image to another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
121
Other Playback Functions (PLAY)
Transferring Music from Your Computer to Camera Memory
You can replace the built-in slideshow background music with other music from your
computer.
Supported File Types:
• PCM format (16-bit, monaural / stereo) WAV files
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the music files you store in camera
memory are played back in name sequence.
1.
Connect the camera to your computer (pages 143, 152).
If you plan to save the music files to the camera’s memory card, make sure the
card is loaded in the camera.
2.
Perform one of the following operations to open the memory card or
built-in memory.
This will cause the camera to be recognized by your computer as a Removable
Disk (Drive).
• Windows
1 Windows 7 / Windows Vista: Start * Computer
Windows XP: Start * My Computer
Windows 2000: Double-click “My Computer”.
2 Double-click “Removable Disk”.
• Macintosh
1 Double-click the camera’s drive icon.
3.
Create a folder named “SSBGM”.
122
Other Playback Functions (PLAY)
4.
Double-click the “SSBGM” folder you created and copy the
background music file to it.
• See the user documentation that comes with your computer for information
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory
card loaded in the camera, the files on the memory card take priority.
• See page 159 for information about camera folders.
5.
Disconnect the camera from the computer (pages 145, 154).
Creating a Snapshot of Movie Frames (MOTION PRINT)
Procedure
[p] (PLAY) * Movie Screen * [MENU] * PLAY Tab *
MOTION PRINT
1.
Use [4] and [6] to scroll
through the movie frames
and display the one you
want to use as the image
of the MOTION PRINT
image.
Holding down [4] or [6]
scrolls at high speed.
2.
9 frames
1 frame
Use [8] and [2] to select either “9 frames” or “1 frame” and then
press [SET].
• When “9 frames” is selected, the frame you select in step 1 will be in the center
of the MOTION PRINT image.
• Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
123
Other Playback Functions (PLAY)
Editing a Movie on the Camera (Movie Editing)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
} Cut
(To-Point Cut)
Cuts everything from the beginning of the movie up to the
current location.
~ Cut
(Point-To-Point Cut)
Cuts everything between two points.
¡ Cut
(From-Point Cut)
Cuts everything from the current location to the end of the
movie.
1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
During playback, changes the playback
[4] [6] direction and playback speed. While
playback is paused, scrolls forward or back.
[SET]
Toggles between pause and play.
124
Cut range (yellow)
Other Playback Functions (PLAY)
3.
Press [2] to display the editing menu and specify one or two cut
points.
} Cut
(To-Point Cut)
While the frame you want the cut to be up to is
displayed, press [2].
1While the frame you want the first (From) cut to be is
~ Cut
(Point-To-Point Cut)
displayed, press [2].
2Select another frame.
3While the frame you want the second (To) cut to be
is displayed, press [2].
¡ Cut
(From-Point Cut)
4.
While the frame you want the cut to be from is
displayed, press [2].
Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
• You also can start a movie editing operation while the movie you want to edit is
playing back. When playback reaches a frame where you want a cut point to be,
press [SET] to pause playback. Next, press [2] to display the menu of editing
options. Perform editing using the same procedures as described above.
125
Other Playback Functions (PLAY)
Adjusting White Balance (White Balance)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
White Balance
You can use the white balance setting to select a light source type for a recorded
image, which will affect the colors of the image.
¤ Daylight
Outdoors, fair weather
' Overcast
Outdoors, cloudy to rain, in tree shade, etc.
“ Shade
Very high temperature light, such as building shade, etc.
† Day White
White or day white fluorescent lighting, without suppressing
color cast
Fluorescent
– Daylight
Fluorescent
Daylight fluorescent lighting, while suppressing color cast
« Tungsten
Suppressing of the appearance of light bulb lighting
Cancel
No white balance adjustment
NOTE
• You also can adjust the white balance when recording images (page 42).
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
126
Other Playback Functions (PLAY)
Adjusting the Brightness of an Existing Snapshot
(Brightness)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Selecting Images for Printing (DPOF Printing)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing
See page 136 for details.
127
Other Playback Functions (PLAY)
Protecting a File Against Deletion (Protect)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
On
Protects specific files.
1 Use [4] and [6] to scroll through the files
until the one you want to protect is displayed.
2 Use [8] and [2] to select “On” and then
press [SET].
An image that is protected is indicated by the
› icon.
3 To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, select
“Off” instead of “On” in step 2 above.
All Files:
On
Protects all files.
1 Use [8] and [2] to select “All Files: On” and then press [SET].
2 Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in
step 1 above.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 170).
NOTE
• Performing the above procedure while a CS group is displayed will protect all the
images in the CS group. You can protect individual images in a CS group by
performing the above procedure while the image is displayed.
. To protect a specific image in a CS group
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.
Use [8] and [2] to select “Protect” and then press [SET].
128
Other Playback Functions (PLAY)
3.
Use [4] and [6] to scroll through images until one you want to protect
is displayed.
4.
Use [8] and [2] to select “On” and then press [SET].
This will protect the image and display the › icon.
• To unprotect an image, select “Off” in step 4 and then press [SET].
5.
After you are finished, select “Cancel” and then press [SET] to exit this
operation.
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 170).
. To protect all the images in a CS group
1.
While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2.
Use [4] and [6] to select the “PLAY” tab.
3.
Use [8] and [2] to select “Protect” and then press [SET].
4.
Use [4] and [6] to display the CS group you want to protect.
5.
Use [8] and [2] to select “On” and then press [SET].
This will protect all the images in the group and display the › icon.
• To unprotect all of the images in the group, select “Off” in step 5 and then press
[SET].
6.
Press [MENU].
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 170).
129
Other Playback Functions (PLAY)
Rotating an Image (Rotation)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation
1.
Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.
When the displayed image is at the orientation you want, press
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You
cannot rotate individual component image in a CS group.
• Rotation of movie images is not supported.
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu
screen.
Resizing a Snapshot (Resize)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can resize an image to one of three sizes:
5M, 2M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
130
Other Playback Functions (PLAY)
Cropping a Snapshot (Trimming)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need, and
save the result in a separate file. The original snapshot is
also retained.
Zoom factor
Represents
snapshot area
Use the zoom controller to zoom the image to the size you
want, use [8], [2], [4], and [6] to display the portion of
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image will
have an aspect ratio of 4:3.
• The recording date of the cropped image will be the
same as the recording date of the original snapshot.
Part of snapshot that is
currently displayed
Copying Files (Copy)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a
memory card to built-in memory.
Built-in *
Card
Copies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It cannot be
used to copy a single file.
Card *
Built-in
Copies a single file on the memory card to camera built-in camera
memory. Files are copied to the folder in built-in memory whose
name has the largest serial number.
• You cannot copy a continuous shutter (CS) group image (page
113).
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].
NOTE
• You can copy snapshots or movies you recorded with this camera.
131
Other Playback Functions (PLAY)
Dividing Up a Continuous Shutter Group (Divide Group)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Divide Group
See page 112 for details.
Combining CS Images into a Single Still Image
(CS Multi Print)
Procedure
[p] (PLAY) * Display CS group. * [MENU] * PLAY Tab *
CS Multi Print
1.
Use [8] and [2] to select “Create”.
• You can use [4] and [6] to select a different CS group, if you want.
2.
Press [SET].
This converts the CS group to a 10M (3648x2736) image with up to 30 CS
frames (5 vertical x 6 horizontal).
• This camera may not be able to correctly convert a CS group image with
another camera.
• The recording date of the converted image will be the same as the recording
date of the original CS group.
• When converting a CS group whose images have been rotated by the
“Rotation” feature to a CS Multi Print image, the arrangement of the images in
the CS Multi Print will be different from that of normal (unrotated) CS images.
Editing a CS Image (CS Frame Edit)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * CS Frame Edit
See the following pages for details.
DPOF Printing: page 137
Protect: page 128
Copy: page 113
Delete: page 110
132
Other Playback Functions (PLAY)
Printing
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print
images directly from a memory card. For details, see the user
documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible
Printer
You can print on a printer that supports PictBridge (page
133).
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
• You can specify which images you want to print, the number of copies, and date
stamp settings before printing (page 136).
Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [6].
3.
Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
133
Printing
. Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to
your printer’s USB port.
USB cable
USB/AV port
Large connector
USB
Small connector
USB port
Terminal cover
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown
in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
• Make sure that the camera is turned off before plugging in or
unplugging the cable. Check the user documentation that
comes with the printer for information about requirements
before plugging into or unplugging from the printer.
134
Printing
. To print
1.
Turn on the printer and load paper.
2.
Turn on the camera.
This will display the print menu screen.
3.
Use [8] and [2] to select “Paper Size”, and then press [6].
4.
Use [8] and [2] to select a paper size and then press [SET].
• The following are the available paper sizes.
3.5"x5", 5"x7", 4"x6", A4, 8.5"x11", By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about
paper settings.
5.
Use [8] and [2] to specify the print option you want.
1 Image
: Prints one image. Select and then press [SET]. Next, use [4]
and [6] to select the image you want to print.
DPOF Printing : Prints multiple images. Select and then press [SET]. With this
option, images will be printed in accordance with DPOF settings
(page 136).
• To toggle date stamping on and off, slide the zoom controller. The date stamp
will be printed when “On” is indicated on the monitor screen.
6.
Use [8] and [2] to select “Print” and then press [SET].
Printing will start and the message “Busy... Please wait...” will appear on the
monitor screen. The message will disappear after a short while, even though
printing is still being performed. Pressing any camera button will cause the
printing status to re-appear. The print menu screen will re-appear when printing is
complete.
• If you selected “1 Image”, you can repeat the procedure from step 5, if you
want.
7.
After printing is complete, turn off the camera and disconnect the USB
cable from the printer and camera.
135
Printing
Using DPOF to Specify Images to be Printed and the Number
of Copies
. Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home
printer that supports DPOF or take the memory card to a professional print
service.
• Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
• Some professional print services may not support DPOF.
. Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * Select images
1.
Use [4] and [6] to scroll through the files until the image you want to
print is displayed.
2.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to date stamp the image, slide the zoom controller. This will cause
“On” to be displayed, meaning the image will be date stamped.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3.
Press [SET].
136
Printing
. Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * All images
1.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• Note that the specified number of copies will be printed for all of the images in
any CS group included with the images.
• If you want to date stamp the image, slide the zoom controller. This will cause
“On” to be displayed, meaning the image will be date stamped.
2.
Press [SET].
NOTE
• You can specify the number of copies for a specific image (page 137) or for all of
the images in a CS group (page 138) by performing the above procedure while an
image in the group is displayed.
. To specify the number of copies for a specific image in a CS group
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.
Use [8] and [2] to select “DPOF Printing” and then press [SET].
3.
Use [8] and [2] to select “Select images” and then press [SET].
4.
Use [4] and [6] to scroll through images until one you want to print is
displayed.
137
Printing
5.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to date stamp the image, slide the zoom controller. This will cause
“On” to be displayed, meaning the image will be date stamped.
• Repeat steps 4 and 5 to configure settings for other images, if you want.
6.
Press [SET].
. To configure the same DPOF settings for all the images in a CS
group
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.
Use [8] and [2] to select “DPOF Printing” and then press [SET].
3.
Use [8] and [2] to select “Frame all” and then press [SET].
4.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to date stamp the image, slide the zoom controller. This will cause
“On” to be displayed, meaning the image will be date stamped.
5.
Press [SET].
138
Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “00” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
. Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
Configuring camera settings
Configure DPOF settings (page 136).
You can turn date stamping on and off each time you print. You can configure
settings so some images include the date stamp and some don’t.
Configure the Camera’s Timestamp setting (page 164).
• The camera’s Timestamp setting imprints the date into a snapshot when you
shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date
stamped with the camera’s Timestamp function. Doing so can cause the two
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date
stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service.
139
Printing
. Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association
(CIPA). You can connect the camera directly to a printer that supports
PictBridge, and perform image selection and printing using the
camera monitor screen and controls.
• PRINT Image Matching III
Using image editing software and printing on a printer that supports
PRINT Image Matching III makes it possible to use information about
shooting conditions that is recorded with the image, and produce
exactly the type of image you want. PRINT Image Matching and
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
• Exif Print
Printing on a printer that supports Exif Print (Exif 2.2) uses
information about shooting conditions recorded with the image to
enhance printed image quality. Contact your printer manufacturer
for information about models that support Exif Print, printer upgrades, etc.
140
Printing
Using the Camera with a Computer
Things you can do using a computer...
You can perform the operations described below while the camera is connected to a
computer.
Save images to a
computer and view
them there
• Save images and view them manually
(USB connection) (pages 143, 152).
• Transfer images to a computer
automatically over a wireless LAN for
viewing (Eye-Fi) (page 156).
Transfer images
stored on your
computer to
camera memory
In addition to images, you also can transfer
screen shot images from your computer to
the camera (Photo Transport*) (page 150).
Play back and edit
movies
• You can play back movies (pages 147,
155).
• To edit movies, use commercially
available software as required.
* Windows only
The procedures you need to perform when using the camera with your computer and
when using the bundled software are different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 142.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
152.
141
Using the Camera with a Computer
Using the Camera with a Windows Computer
Install the required software in accordance with the version of Windows you are
running and what you want to do.
When you want to
do this:
Operating System
Version
Install this software:
Save images to a
Windows 7 / Windows
computer and view
Vista / Windows XP / Installation not required.
them there manually Windows 2000
See
page:
143
Play movies
Installation not required.
• Windows Media Player,
which is already installed
on most computers, can be
used for playback.
Windows 7 / Windows
• If your computer is running
Vista / Windows XP /
Windows 2000 and does
Windows 2000
not have DirectX 9.0c or
higher installed, download
DirectX from the Microsoft
DirectX site and install it on
your computer.
Edit movies
Windows 7 / Windows –
• Use commercial software
Vista / Windows XP /
as required.
Windows 2000
Upload movie files
to YouTube
Windows 7 / Windows
Vista / Windows XP
YouTube Uploader for
(SP2/SP3) /
CASIO*
Windows 2000 (SP4)
148
Transfer images to
the camera
Windows 7 / Windows
Vista / Windows XP / Photo Transport 1.0*
Windows 2000
150
View the User’s
Guide
Windows Vista /
Windows XP
(SP2/SP3) /
Windows 2000 (SP4)
149
Adobe Reader 8
(Not required if already
installed.)
147
–
* YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of
Windows OS.
142
Using the Camera with a Computer
. Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the
“Read me” file that comes with each application for details. Information about
computer system requirements also can be found under “Computer System
Requirements for Bundled Software” on page 184 of this manual.
. Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to
run.
• Operation under a dual-processor environment is not supported.
• Operation may not be possible under certain computer environments.
Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
. To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [6].
3.
Use [8] and [2] to select “Mass Storage”, and then press [SET].
143
Using the Camera with a Computer
4.
Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.
USB port
USB cable
Large connector
USB/AV port
Small connector
Terminal
cover
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the
camera if you connect via a USB hub. Always connect
directly to the computer’s USB port.
5.
Turn on the camera.
6.
Windows 7 / Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
Windows 2000 users: Doubleclick “My Computer”.
144
Using the Camera with a Computer
7.
Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
8.
Right-click the “DCIM” folder.
9.
On the shortcut menu that appears, click “Copy”.
10.
Windows 7 / Windows Vista users: Click “Start” and then
“Documents”.
Windows XP users: Click “Start” and then “My Documents”.
Windows 2000 users: Doubleclick “My Documents” to open it.
• If you already have a “DCIM” folder in “Documents” (Windows 7 /
Windows Vista) or “My Documents” (Windows XP / Windows 2000), the next
step will overwrite it. If you want to keep the existing “DCIM” folder, you need to
change its name or move it to a different location before performing the next
step.
11.
Windows 7 users: On the “Documents” “Organize” menu, select
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select
“Paste”.
Windows XP / Windows 2000 users: On the “My Documents” “Edit”
menu, select “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” (Windows 7 / Windows Vista) or “My Documents” (Windows XP /
Windows 2000) folder. You now have a copy of the files that are in camera
memory on your computer.
12.
After you finish copying images, disconnect the camera from the
computer.
Windows 7, Windows Vista, Windows XP
On the camera, press [ON/OFF] to turn off the camera. After making sure that the
back lamp is unlit, disconnect the camera from the computer.
Windows 2000
Click card services in the task tray on your computer screen, and disable the
drive number assigned to the camera. Next, after making sure that the back lamp
is unlit, press the camera’s [ON/OFF] button to turn off the camera and
disconnect the camera from your computer.
145
Using the Camera with a Computer
. To view images you copied to your computer
1.
Double-click the copied “DCIM” folder to open it.
2.
Double-click the folder that contains the images you want to view.
3.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 159.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component
images in the CS group. A CS group cannot be viewed as a CS image on a
computer.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
146
Using the Camera with a Computer
Playing Movies
Windows Media Player, which is already installed on most computers, can be used
for movie playback. To play back a movie, first copy the movie to your computer and
then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Windows 7 / Windows Vista / Windows XP / Windows 2000
CPU
: Pentium 4 3.2 GHz or higher
Required Software : Windows Media Player, DirectX 9.0c or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Try upgrading Windows Media Player to the latest version.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal of a TV or
computer and play back movies that way.
147
Using the Camera with a Computer
Uploading Movie Files to YouTube
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your
camera simplifies uploading of movie files you recorded with the “For YouTube”
scene to YouTube.
. What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload
movies and view movies uploaded by others.
. To install YouTube Uploader for CASIO
1.
On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.
2.
After reading the information about installation conditions and system
requirements for installation in the “Read me” file, install YouTube
Uploader for CASIO.
. To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights)
unless you yourself own the copyright or you have obtained the permission of the
applicable copyright holder(s).
• The maximum file size for each upload is 1024MB or 10 minutes of playing time.
1.
Record the movie you want to upload using the “For YouTube” scene
(page 66).
2.
If it isn’t already, connect your computer to the Internet.
3.
Connect the camera to your computer (page 143).
4.
Turn on the camera.
YouTube Uploader for CASIO will start up automatically.
• If this is the first time you are using the application, configure the YouTube user
ID and network environment settings, and then click the [OK] button.
148
Using the Camera with a Computer
5.
The left side of the display will have an area for inputting a title,
category, and other information required for uploading to YouTube.
Enter the required information.
6.
The right side of the display shows a list of movie files in camera
memory. Select the check box next to the movie file you want to
upload.
7.
When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button to exit the application.
Viewing User Documentation (PDF Files)
1.
Start up your computer, and place the bundled CD-ROM into its CDROM drive.
Normally, this should cause the menu screen to appear automatically. If your
computer does not display the menu screen automatically, navigate to the CDROM on your computer and then double-click the “AutoMenu.exe” file.
2.
On the menu screen, click the “Language” down arrow button and then
select the language you want.
3.
Click “Manual” to select it and then click “Digital Camera”.
IMPORTANT!
• You must have Adobe Reader or Adobe Acrobat Reader installed on your
computer in order to view the contents of a PDF file. If you do not already have
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the
bundled CD-ROM.
149
Using the Camera with a Computer
Transferring Images from Your Computer to Camera Memory
If you want to transfer images from your computer to the camera, install Photo
Transport on your computer from the CD-ROM that comes with the camera.
. To install Photo Transport
1.
On the CD-ROM menu screen, select “Photo Transport”.
2.
After reading the information about installation conditions and system
requirements for installation in the “Read me” file, install Photo
Transport.
. To transfer images to the camera
1.
Connect the camera to your computer (page 143).
2.
On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3.
Drag the file(s) you want to transfer to the [Transfer] button.
4.
Follow the instructions that appear on the display to complete the
transfer.
• The details of the instructions that appear on the display and the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
Transfer Data
• Only image files with the following extensions can be transferred to the camera:
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when
transferred.)
• Certain types of images may not be able to be transferred.
• You cannot transfer movies to the camera.
150
Using the Camera with a Computer
. To transfer computer screen captures to the camera
1.
Connect the camera to your computer (page 143).
2.
On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3.
Display the screen whose screen capture you want to transfer.
4.
Click the [Capture] button.
5.
Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture
and then hold down the mouse button. Keeping the mouse button depressed,
drag the pointer down to the lower right corner of the area and then release the
mouse button.
6.
Follow the instructions that appear on the display.
This will send an image of the area you selected to the camera.
• The transfer operation converts screen captures to JPEG format.
• The instructions that appear on the display and details about the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
. About settings and help
Click the [Settings] button when you want to change the Photo Transport setup. For
help about operation procedures and troubleshooting, click the Photo Transport
[Help] button.
User Registration
You can perform user registration over the Internet. To do so, of course, you need to
be able to connect to the Internet with your computer.
1.
On the CD-ROM menu screen, click the “Register” button.
• This starts up your Web browser and accesses the user registration website.
Follow the instructions that appear on your computer screen to register.
151
Using the Camera with a Computer
Using the Camera with a Macintosh
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
When you want to
do this:
Operating
System Version
Save images to your
Macintosh and view
them there manually
OS 9
Save images to your
Macintosh
automatically/
Manage images
OS 9
Use commercially available
software.
OS X
Use iPhoto, which comes bundled
with some Macintosh products.
Play movies
OS 9 / OS X
You can playback with QuickTime,
which comes bundled with your
operating system.
OS X
Install this software:
See
page:
Installation not required.
152
155
155
Connecting the Camera to Your Computer and Saving Files
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6)
only. Use the standard USB driver that comes with your supported operating
system.
. To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [6].
3.
Use [8] and [2] to select “Mass Storage”, and then press [SET].
152
Using the Camera with a Computer
4.
Turn off the camera and then use the USB cable that comes with the
camera to connect it to your Macintosh.
USB port
USB cable
Large connector
USB/AV port
Small connector
Terminal
cover
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera
if you connect via a USB hub. Always connect directly to
the computer’s USB port.
5.
Turn on the camera.
The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
153
Using the Camera with a Computer
6.
Double-click the camera’s drive icon.
7.
Drag the “DCIM” folder to the folder to which you want to copy it.
8.
After the copy operation is complete, drag the drive icon to Trash.
9.
On the camera, press [ON/OFF] to turn off the camera. After making
sure that the green back lamp is unlit, disconnect the camera from the
computer.
. To view copied images
1.
Double-click the camera’s drive icon.
2.
Double-click the “DCIM” folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 159.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component
images in the CS group. A CS group cannot be viewed as a CS image on a
computer.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
154
Using the Camera with a Computer
Transferring Images Automatically and Managing Them on
Your Macintosh
If you are running Mac OS X, you can manage snapshots using iPhoto, which comes
bundled with some Macintosh products. If you are running Mac OS 9, you will need to
use commercially available software.
Playing a Movie
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Mac OS X 10.3.9 or higher
Required Software : QuickTime 7 or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Change the movie image quality setting to “STD”.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal of a TV or
Macintosh and play back movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
155
Using the Camera with a Computer
Viewing User Documentation (PDF Files)
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems
Incorporated website and install Acrobat Reader.
1.
On the CD-ROM, open the “Manual” folder.
2.
Open the “Digital Camera” folder and then open the folder for the
language whose user’s guide you want to view.
3.
Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is for English.)
User Registration
Internet registration only is supported. Visit the following CASIO website to register:
http://world.casio.com/qv/register/
Using an Eye-Fi Wireless SD Memory Card to Transfer Images
(Eye-Fi)
Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it
possible to transfer image data automatically to a computer via wireless LAN.
1.
Configure LAN access point, transfer destination and other settings for
the Eye-Fi card in accordance with the instructions that come with the
Eye-Fi card.
2.
After configuring settings, load the Eye-Fi card into the camera and
record.
Images you record are sent by wireless LAN to your computer, etc.
• For full details, see the user documentation that comes with the Eye-Fi card.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
156
Using the Camera with a Computer
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or
turn off Eye-Fi card communication (page 161) when on an aircraft or in any other
location where use of wireless communication is limited or prohibited.
• Loading an Eye-Fi card will cause the Eye-Fi indicator
to
appear on the monitor screen. Its transparent or not transparent
appearance indicates the communication status as shown below.
Transparent
Access point cannot be found or no transferable
image data exists.
Not transparent
Image transfer in progress
• A communication icon
will appear on the monitor screen while image data
transfer is in progress.
• The camera’s Auto Power Off (page 167) function is disabled while image data
transfer is in progress.
• A confirmation message will appear on the monitor screen if you try to turn off the
camera while image data transfer is in progress. Follow the instructions in the
messages (page 191).
• Transfer of a large number of images can take some time to complete.
• The original images remain on the Eye-Fi card after the image data transfer.
• Recording a movie to an Eye-Fi card may result in movie frames being dropped.
• Proper Eye-Fi card data communication may not be possible due to camera
settings, battery level, or operating conditions.
157
Using the Camera with a Computer
Files and Folders
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder
Structure” (page 159).
Name and Maximum Number Allowed
Example
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
File
CIM G0026.JPG
Serial number
(4 digits)
Extension
Folders
Folders are named from 100CASIO to
100th folder name:
999CASIO.
100CASIO
There can be up to 900 folders in memory.
• BEST SHOT has a scene named “For
Serial number (3 digits)
YouTube” that optimizes movie settings for
recording movies for upload to YouTube.
Images recorded with the YouTube scene are
stored in a folder named “100YOUTB”.
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see pages 12 and 13.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
158
Using the Camera with a Computer
Memory Card Data
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
DCF is a standard that makes it possible to view and print images recorded on one
manufacturer’s camera on DCF-compliant devices produced by other manufacturers.
You can transfer DCF-compliant images recorded with another camera to this
camera and view them on this camera’s monitor screen.
. Memory Folder Structure
100CASIO *1
CIMG0001.JPG
CIMG0002.AVI
DCIM Folder
Recording Folder
Image File
Movie File
101CASIO *1
102CASIO *1
Recording Folder
Recording Folder
MISC
AUTPRINT.MRK
DPOF File Folder
DPOF File
DCIM
RAW
RAW Image Folder
RAW Image Record Folder
100CASIO *3
3
CIMG001.DNG * RAW Image File
SCENE *2
Snapshot BEST SHOT User Setup Folder
SSBGM
SSBGM001.WAV
SSBGM002.WAV
Background Music Folder
Background Music File
Background Music File
STARTING.JPG *2
Startup Image File
*1 The BEST SHOT “For YouTube” scene sets up the camera for recording movies that
are optimized for uploading to YouTube. Images recorded with the “For YouTube”
scene are stored in a folder named “100YOUTB”.
*2 This folder or file can be created in built-in memory only.
*3 RAW image data is stored with the same file name in a folder with the same folder
name as the corresponding JPEG memory that is recorded at the same time.
159
Using the Camera with a Computer
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 159 in order for the camera to be able to recognize them correctly.
• You also can use a PC card adapter or a memory card reader/writer to access
camera files directly from the camera’s memory card.
160
Using the Camera with a Computer
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
For information about menu operations, see page 89.
Adjusting Monitor Screen Brightness (Screen)
Procedure
[MENU] * Set Up Tab * Screen
With this setting, the camera detects available light levels and
Auto 2/ automatically adjusts the brightness of the monitor screen accordingly.
Auto 1 “Auto 2” changes monitor screen brightness relatively more quickly than
“Auto 1” when surrounding light is bright.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1
Bright setting for outdoor use, etc. Brightness that is greater than 0.
0
Normal monitor screen brightness for indoor use, etc.
Turning off Eye-Fi Card Communication (Eye-Fi)
Procedure
[MENU] * Set Up Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 156).
161
Other Settings (Set Up)
Auto Image Orientation Detection and Rotation (Auto Rotate)
Procedure
[MENU] * Set Up Tab * Auto Rotate
On
Automatically rotates snapshots shot with the camera held vertically 90
degrees.
Off
Images not rotated automatically.
The camera automatically detects whether a snapshot image was shot in portrait or
landscape orientation and displays it accordingly. Auto rotation is not performed for
movies.
Configuring Camera Sound Settings (Sounds)
Procedure
[MENU] * Set Up Tab * Sounds
Startup
Half Shutter
Shutter
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Operation
= Operation
Specifies the sound volume. This setting is also used as the
audio level during video output (page 115).
= Play
Specifies the volume of movie audio output. This volume
setting is not used during video output (from the USB/AV port)
(page 115).
• Setting a volume level of 0 mutes output.
162
Other Settings (Set Up)
Specifying the File Name Serial Number Generation Rule
(File No.)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 158).
Continue
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered by the camera, numbering of new files will start from the
largest sequential number in the memory card file names plus 1.
Reset
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the memory card
file names plus 1.
Configuring World Time Settings (World Time)
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1.
Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2.
Use [8] and [2] to select “City” and then press [6].
• To change the “World” setting to summer time, use [8] and [2] to select
“DST” and then select “On”. Summer time is used in some geographical areas
to advance the current time setting by one hour during the summer months.
163
Other Settings (Set Up)
3.
Use [8], [2], [4], and [6] to select the geographic area you want and
then press [SET].
4.
Use [8] and [2] to select the city you want and then press [SET].
5.
Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 165).
Time Stamping Snapshots (Timestamp)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2012, 1:25 p.m.
Date
2012/7/10
Date&Time
2012/7/10 1:25pm
Off
No stamping of date and/or time
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 139).
• Stamping is performed in accordance with the date and time settings (page 165)
and the display style settings (page 165).
164
Other Settings (Set Up)
Setting the Camera’s Clock (Adjust)
Procedure
[MENU] * Set Up Tab * Adjust
[8] [2]
Change the setting at the cursor location
[4] [6]
Move the cursor between settings
Zoom
controller
Toggles between 12-hour and 24-hour format
When the date and time settings are what you want, select “Apply” and then press
[SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 163) before setting the time and date. If
you set the time and date while the wrong city is selected for your Home City, the
times and dates of all of the World Time cities (page 163) will be wrong.
Specifying the Date Style (Date Style)
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: July 10, 2012
YY/MM/DD
12/7/10
DD/MM/YY
10/7/12
MM/DD/YY
7/10/12
• This setting also affects the control panel date format as shown below (page 35).
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
165
Other Settings (Set Up)
Specifying the Display Language (Language)
Procedure
[MENU] * Set Up Tab * Language
. Specify the display language you want.
1 Select the tab on the right.
2 Select “Language”.
3 Select the language you want.
1
• Camera models sold in certain geographic areas
may not support display language selection.
23
Configuring Sleep State Settings (Sleep)
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During movie recording and playback
– During Move Out CS or Move In CS auto record standby
– When both sleep and Auto Power Off are turned on, Auto Power Off takes
priority.
166
Other Settings (Set Up)
Configuring Auto Power Off Settings (Auto Power Off)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS group playback
– During movie recording and playback
– During Move Out CS or Move In CS auto record standby
Configuring [r] and [p] Settings (REC/PLAY)
Procedure
[MENU] * Set Up Tab * REC/PLAY
Power On
Camera turns on whenever [r] (REC) or [p] (PLAY) is
pressed.
Power On/Off
Camera turns on or off whenever [r] (REC) or [p] (PLAY) is
pressed.
Disable
Camera does not turn on or off when [r] (REC) or [p] (PLAY)
is pressed.
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC
mode or [p] (PLAY) in the PLAY mode.
• Change this setting to “Power On” or “Power On/Off” before connecting to a TV for
image viewing.
167
Other Settings (Set Up)
Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Mass Storage
Select this setting when connecting to a computer (pages 143,
152). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
images from the camera to a computer.
PTP
(PictBridge)
Select this setting when connecting to a printer that supports
PictBridge (page 133).
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC Video system used in Japan, the U.S., and other countries
PAL
Video system used in Europe and other areas
4:3
Normal TV screen aspect ratio
16:9
Wide screen aspect ratio
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are
displayed on the TV screen. The camera’s monitor screen will show on-screen
information only (without any movie image).
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
168
Other Settings (Set Up)
Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
• See page 119 for details.
Configuring a Startup Image (Startup)
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p]
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
• Formatting built-in memory (page 170) will delete the current startup image setting.
• You can select the first snapshot of a CS group as the startup image. If you want to
select another image within a CS group, you need to first divide up the CS group or
use the CS Frame Edit feature to make a copy of the image outside of the CS
group.
169
Other Settings (Set Up)
Formatting Built-in Memory or a Memory Card (Format)
Procedure
[MENU] * Set Up Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– BEST SHOT user setups
– Startup screen
• Formatting a memory card will delete the following data.
– Protected images
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause
the camera to stop operating normally.
Resetting the Camera to Factory Defaults (Reset)
Procedure
[MENU] * Set Up Tab * Reset
See page 185 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language, video output
170
Other Settings (Set Up)
Configuring Monitor Screen Settings
Turning Display Information On and Off (Info)
Each press of [8] (DISP) will cycle through display settings that display or hide onscreen information and the control panel. You can configure separate settings for the
REC mode and PLAY mode.
Information on,
control panel on
Information on,
control panel on,
histogram on
Displays setting information and the control panel.
• While A, S, or M is selected as the exposure mode, the
aperture and shutter speed specified for snapshots are
displayed.
Displays setting information and the
control panel, and a histogram (page 171)
on the left side of the display. Also
Histogram
displays the remaining movie recording
time in place of the remaining snapshot
capacity, as well as a movie image quality icon.
• While A, S, or M is selected as the exposure mode, the
aperture and shutter speed specified for movies are
displayed.
Information off,
control panel off
Hides setting information and the control panel.
• The control panel is not displayed and display information settings cannot be
changed during movie recording.
Using the On-screen Histogram to Check Exposure
(+Histogram)
Displays a histogram on the monitor screen which you can use to
check the exposure of an image before you shoot it. You also can
display the histogram in the PLAY mode for information about the
exposure levels of images.
Histogram
NOTE
• A centered histogram does not necessarily guarantee optimum exposure. The
recorded image may be over-exposed or under-exposed, even though its
histogram is centered.
• Due to the limitations of exposure compensation, you may not be able to achieve
an optimum histogram configuration.
• Use of the flash and certain shooting conditions can cause the histogram to
indicate exposure that is different from the actual exposure of the image when it is
shot.
• The histogram cannot be displayed during high speed movie recording.
171
Configuring Monitor Screen Settings
How to Use the Histogram
A histogram is a graph that represents the lightness of an image in terms of the
number of pixels. The vertical axis indicates the number of pixels, while the horizontal
axis indicates lightness. If the histogram appears too lopsided for some reason, you
can use EV shift to move it left or right in order to achieve better balance. Optimum
exposure can be achieved by EV shifting so the graph is as close to the center as
possible. For snapshots, you can even display individual histograms for R (red), G
(green), and B (blue).
Example Histograms
A histogram towards the left side results when the
overall image is dark. A histogram that is too far to
the left may result in “black out” of the dark areas
of an image.
A histogram towards the right side results when
the overall image is light. A histogram that is too
far to the right may result in “white out” of the light
areas of an image.
An overall well-balanced histogram results when
the overall image is at optimal lightness.
172
Configuring Monitor Screen Settings
Appendix
Precautions during Use
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile
or other vehicle, or while walking. Looking at the monitor while in motion creates
the risk of serious accident.
. Flash
• Never use the flash unit in areas where flammable or explosive gas may be
present. Such conditions create the risk of fire and explosion.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so
can interfere with the driver’s vision and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of
loss of eyesight.
. Monitor Screen
• Should the monitor screen ever become cracked, never touch any of the liquid
inside the monitor screen. Doing so creates the risk of skin inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse your
mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately
rinse with clean water for at least 15 minutes and contact your physician.
. Connections
• Never plug any devices that are not specified for use with this camera into
connectors. Connecting a non-specified device creates the risk of fire and electric
shock.
. Transport
• Never operate the camera inside of an aircraft or anywhere else where operation of
such devices is restricted. Improper use creates the risk of serious accident.
173
Appendix
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor, or while it
is overheating creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to protect yourself against burn
injury.
3. Contact your dealer or nearest CASIO authorized service center.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside the camera
creates the risk of fire and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present. Particular care is required when
using the camera where it is raining or snowing, near the ocean or other body of
water, or in a bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other rough
treatment creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and creates the risk
of fire and electric shock.
. Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so creates the risk
of electric shock, burn injury, and other personal injury. Be sure to leave all internal
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized
service center.
174
Appendix
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by transferring it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure as
described in the documentation that comes with the camera. Incorrectly replacing
the battery can result in corruption or loss of data in camera memory.
. Rechargeable Battery
• Use only the specified charger unit or the specified device to charge the battery.
Attempting to charge the battery by an unauthorized means creates the risk of
battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing so can
damage the battery, and cause deterioration of its performance and loss of service
life.
• The battery is intended for use with a CASIO Digital Camera only. Use with any
other device creates the risk of the battery damage, or deterioration of battery
performance and service life.
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Make sure the battery is oriented correctly when it is connected to the charger
unit.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.)
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never
place the battery into a microwave oven, heater, high-pressure generating
device, etc.
• Should you ever notice leakage, strange odor, heat generation, discoloration,
deformation, or any other abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera or charger unit and keep it away
from open flame.
175
Appendix
• Do not use or leave the battery under direct sunlight, in an automobile parked in the
sun, or in any other area subject to high temperatures. Doing so can damage the
battery, and cause deterioration of its performance and loss of service life.
• If battery charging does not end normally within the specified charging time, stop
charging anyway and contact your local CASIO authorized service center.
Continued charging creates the risk of battery overheating, fire, and explosion.
• Battery fluid can damage your eyes. Should battery fluid get into your eyes
accidentally, immediately rinse them with clean tap water and then consult a
physician.
• Be sure to read the user documentation that comes with the camera and special
charger unit before using or charging the battery.
• If a battery is to be used by young children, make sure that a responsible adult
makes them aware of the precautions and proper handling instructions, and make
sure that they handle the battery correctly.
• Should fluid from a battery accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin
irritation.
. Battery Life
• Battery continuous operation times provided in this manual represent the
approximate amount of time before the camera turns off due to low battery power
when being powered by the special battery under normal temperature (23°C
(73°F)). They do not guarantee that you will be able to achieve the indicated level
of operation. Actual battery life is greatly affected by ambient temperature, battery
storage conditions, the amount of time spent in storage, etc.
• Leaving the camera on can run down the battery and cause the low battery
warning to appear. Turn off the camera whenever you are not using it.
• The low battery warning indicates that the camera is about to turn off due to low
battery power. Charge the battery as soon as possible. Leaving a low or dead
battery in the camera can lead to battery leakage and data corruption.
176
Appendix
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Using a battery that is low
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 191). Perform the action indicated by the message that appears.
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near an air conditioner or in other areas subjected to extreme temperature or
humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
177
Appendix
. Caring for your camera
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. Charger Unit Handling Precautions
-
0 Never plug the power cord into an outlet whose voltage rating is different from
that marked on the power cord. Doing so creates the risk of fire, malfunction,
and electric shock.
0 Take care to protect the power cord against damage and breaking. Never place
heavy objects onto the power cord, or expose it to intense heat. Doing so can
damage the power cord, creating the risk of fire and electric shock.
0 Never try to modify the power cord, or subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire, malfunction, and electric shock.
0 Never plug in or unplug the power cord while your hands are wet. Doing so
creates the risk of electric shock.
0 Do not plug the power cord into an outlet or extension cord that is shared by
other devices. Doing so creates the risk of fire, malfunction, and electric shock.
0 Should the power cord ever become damaged (to the point that internal wires
are exposed or cut), immediately contact your original retailer or a CASIO
authorized service center to request repair. Continued use of a damaged power
cord creates the risk of fire, malfunction, and electric shock.
• The charger unit becomes slightly warm during charging. This is normal and does
not indicate malfunction.
• Unplug the power cord from the power outlet when you are not using the charger
unit.
• Never use detergent to clean the power cord (especially the plug).
• Never cover the charger unit with a blanket, etc. Doing so creates the risk of fire.
178
Appendix
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
. Copyrights
Except for your own personal enjoyment, unauthorized use of use of snapshots or
movies of images whose rights belong to others, without the permission of the right
holder, is forbidden by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your
own personal enjoyment. Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site, or any other Internet
site, or otherwise distributing them to third parties without the permission of the
copyright holder is strictly prohibited by copyright laws and international treaties. For
example, uploading or distributing on the Internet images of TV programs, live
concerts, music videos, etc. that were photographed or recorded by you may infringe
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held
liable for use of this product in any way that infringes on the copyrights of others or
that violates copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not used within the text of this
manual.
• The SDHC logo is a trademark.
• Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista,
Windows 7, and DirectX are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.
• Adobe and Reader are trademarks or registered trademarks in the United States
and other countries of Adobe Systems Incorporated.
• YouTube, the YouTube logo, and “Broadcast Yourself” are trademarks or
registered trademarks of YouTube, LLC.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
• EXILIM, Photo Transport, and YouTube Uploader for CASIO are registered
trademarks or trademarks of CASIO COMPUTER CO., LTD.
• All other company or product names mentioned herein may be registered
trademarks or trademarks of their respective companies.
179
Appendix
Any and all unauthorized commercial copying, distribution, and copying of the
bundled software over a network are prohibited.
This product contains PrKERNELv4 Real-time OS of eSOL
Co., Ltd. Copyright © 2007 eSOL Co., Ltd.
PrKERNELv4 is a registered trademark of eSOL Co., Ltd. in
Japan.
This product’s YouTube upload functionality is included under license from YouTube,
LLC. The presence of YouTube upload functionality in this product is not an
endorsement or recommendation of the product by YouTube, LLC.
Power Supply
Charging
If the [CHARGE] lamp flashes red...
• Charging cannot be performed because ambient temperature or the temperature of
the charger is too hot or too cold. Leave the camera in a location whose
temperature is within the range where charging can be performed. When the
camera returns to a temperature where charging can be performed, the [CHARGE]
lamp will light red.
• Check if the charger and battery contacts are dirty. If contacts are dirty, wipe them
clean with a dry cloth.
If problems continue to occur after you perform the above steps, it could mean that
the battery is faulty. Contact your nearest CASIO authorized service center.
180
Appendix
To replace the battery
1.
Open the battery cover and
remove the current battery.
Stopper
With the monitor screen side of the
camera facing upwards, slide the
stopper in the direction indicated by
the arrow in the illustration. After the
battery pops out, pull it the rest of the
way out of the camera.
2.
Load a new battery.
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 5°C to
35°C (41°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
181
Appendix
Using the Camera in another Country
. Precautions during Use
• The bundled charger is designed for operation with any power supply in the range
of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord
plug depends on each country or geographic area. Before taking the camera and
charger along on a trip, check with travel agent about the power supply
requirements in your destination(s).
• Do not connect the charger to a power supply through a voltage converter or
similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-90) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
Using a Memory Card
See page 20 for information about supported memory cards and how to load a
memory card.
To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
• Never remove a card from the camera while the
back lamp is flashing green. Doing so can cause
the image save operation to fail and even
damage the memory card.
182
Appendix
. Using a Memory Card
• SD memory cards and SDHC memory cards have a
write protect switch. Use the switch when you need to
Write enabled
guard against accidentally deleting data. Note,
however, if you write protect an SD memory card you
must then turn write protection off whenever you want
Write disabled
to record to it, format it, or delete any of its images.
• If a memory card starts to behave abnormally during
image playback, you can restore normal operation by
reformatting it (page 170). However, it is recommended that you always take along
multiple memory cards whenever using the camera far away from the home or
office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.)
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
• Use the format function (page 170) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
183
Appendix
Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. Be sure to
check the requirements for the particular application you are trying to use. Note that
the values provided here are minimum requirements for running each application.
Actual requirements are greater, depending on the number of images and the sizes of
the images being handled.
0 Windows
YouTube Uploader for CASIO
Operating System : Windows 7 / Windows Vista / Windows XP (SP2/SP3) /
Windows 2000 (SP4)
Other
: Sufficient memory to run the operating system
Computer configuration that enables playback of movies on the
YouTube site
Computer configuration that enables upload of movies to the
YouTube site
Photo Transport 1.0
Operating System
: Windows 7 / Windows Vista / Windows XP / Windows 2000
Memory
: At least 64MB
Hard Disk Drive Space : At least 2MB
Adobe Reader 8
Operating System
: Windows Vista / Windows XP (SP2/SP3) / Windows 2000
(SP4)
CPU
: Pentium III Class
Memory
: At least 128MB
Hard Disk Drive Space : At least 180MB
Other
: Internet Explorer 6.0 or higher installed
For details about the minimum system requirements for each software application,
see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes
bundled with the camera.
184
Appendix
Reset Initial Default Settings
The tables in this section show the initial default settings that are configured for menu
items (displayed when you press [MENU]) after you reset the camera (page 170).
Menu items depend on whether the camera is in the REC mode or PLAY mode.
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
. REC Mode
“REC” Tab
Focus
Q (Auto Focus)
Grid
Off
Self-timer
Off
Review
On
Anti Shake
A Camera AS
Icon Help
On
AF Area
U Spot
AF Assist Light
On
Face Detection
Off
Continuous AF
Off
CS
High Speed CS
Memory
Save CS Images
Normal (Batch)
Digital Zoom
On
L/R Key
Off
Quick Shutter
Off
Flash: On / Focus:
Off / ISO: Off /
White Balance:
Off / EV Shift: Off /
AF Area: On /
Metering: Off / CS:
On / Self-timer:
Off / Flash
Intensity: Off /
Digital Zoom: On /
MF Position: Off /
Zoom Position: Off
Flash Intensity
0
Color Filter
Off
Sharpness
0
Saturation
0
Contrast
0
“Quality” Tab
T Quality
(Snapshots)
» Quality
(Movies)
HS » Speed
Normal
HD
240 fps
Metering
B Multi
Lighting
Off
185
Appendix
“Set Up” Tab
Screen
Auto 2
Adjust
–
Eye-Fi
On
Date Style
–
Auto Rotate
On
Language
–
Sleep
1 min
Sounds
Startup: Sound 1 /
Half Shutter:
Sound 1 /
Shutter: Sound 1 /
Operation:
Sound 1 /
= Operation:
...//// /
= Play: ...////
Auto Power Off 5 min
REC/PLAY
Power On
USB
Mass Storage
Video Out
–
HDMI Output
Auto
Startup
Off
Format
–
Reset
–
Protect
–
Rotation
–
Resize
–
MOTION PRINT 9 frames
Trimming
–
Movie Editing
–
Copy
–
White Balance
–
Divide Group
–
Brightness
–
CS Multi Print
–
DPOF Printing
–
CS Frame Edit
–
File No.
Continue
World Time
Home
Timestamp
Off
. PLAY Mode
“PLAY” Tab
Slideshow
Images: All images /
Time: 30 min /
Interval: 3 sec /
Effect: Pattern 1
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
186
Appendix
When things don’t go right...
Troubleshooting
Problem
Possible Cause and Recommended Action
Power Supply
Power does not
turn on.
1)The battery may not be loaded correctly (page 17).
2)The battery may be dead. Charge the battery (page 16). If the
battery goes dead soon after being charged, it means the
battery has reached the end of its life and needs to be
replaced. Purchase a separately available CASIO NP-90
rechargeable lithium ion battery.
The camera
suddenly powers
down.
1)Auto Power Off may have activated (page 167). Turn power
back on.
2)The battery may be dead. Charge the battery (page 16).
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Power will not turn
off. Nothing
happens when a
button is pressed.
Remove the battery from the camera and then reload them.
Image Recording
Image is not
recorded when the
shutter button is
pressed.
1)If the camera is in the PLAY mode, press [r] (REC) to enter
the REC mode.
2)If the flash is charging, wait until the charge operation
finishes.
3)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Auto Focus does
not focus properly.
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)The subject you are shooting may not be a type that is
compatible with Auto Focus (page 32). Use manual focus
(page 91).
4)You may be moving the camera when shooting. Try shooting
with Anti Shake or use a tripod.
5)You may be pressing the shutter button all the way without
waiting for Auto Focus. Half-press the shutter button and
allow enough time for Auto Focus to focus.
187
Appendix
Problem
Possible Cause and Recommended Action
The subject is out
of focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The flash does not
fire.
1)If ? (Flash Off) is selected as the flash mode, change to
another mode (page 44).
2)If the battery is low, charge it (page 16).
3)If a BEST SHOT scene that uses ? (Flash Off) is selected,
change to a different flash mode (page 44) or select a
different BEST SHOT scene (page 68).
The ? (Flash Off)
icon flashes red on
the monitor screen
and the flash does
not fire.
The flash unit may be malfunctioning. Contact a CASIO
authorized service center or your original retailer. Note that
though the flash will not fire, you still can use the camera for
non-flash shots.
Camera powers
down during Selftimer countdown.
The battery may be low. Charge the battery.
The monitor screen 1)You may be using Manual Focus and have not focused the
image is out of
image. Focus the image (page 91).
focus.
2)You may be using ´ (Macro) for scenery or portraits. Use
Auto Focus for scenery and portrait shots (page 91).
3)You may be trying to use Auto Focus or ) (Infinity) when
shooting a close-up shot. Use the ´ (Macro) for close ups
(page 91).
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)You may be attempting to shoot in a dark location with ?
(Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
44) or use lights for illumination.
3)Lighting (page 106) may be enabled for snapshots, which can
cause an increase in digital noise. Use a light or some other
means to illuminate the subject.
4)Shooting movies for long periods in areas where temperature
is relatively high can cause digital noise (dots of light) to
appear in the movie image. If this happens, move to a cooler
environment or turn off the camera and allow it to cool down,
which should cause normal operation to resume.
188
Appendix
Problem
Possible Cause and Recommended Action
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
, charge the
battery as soon as possible (page 18).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright,
the faces of people
in the image are
dark.
Not enough light is reaching the subjects. Change the flash
mode setting to < (Flash On) for daylight synchro flash (page
44), or adjust EV shift to the + side (page 43).
Night shots come
out bad.
Use the following BEST SHOT scenes (page 68) when shooting
at night.
• High Speed Night Scene (for shooting night scenery only)
• High Speed Night Scene and Portrait (for shooting people
against night scenery)
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Change the flash mode setting to <
(Flash On) for daylight synchro flash (page 44), or adjust EV
shift to the + side (page 43).
Digital zoom will
not go up to the
maximum value.
The digital zoom setting may be turned off. Turn on digital zoom
(page 101).
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 177).
3)Focus is fixed during movie recording.
Movie recording
suddenly stops.
The camera’s protection function may have activated because
camera temperature is too high. Wait until the camera
temperature drops to normal levels.
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
189
Appendix
Problem
Possible Cause and Recommended Action
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
Note that you cannot edit the following types of snapshots.
edited (with White
• Snapshots created using MOTION PRINT
Balance,
• CS group snapshots
Brightness, Resize, • Movies
Trimming,
• Snapshots recorded with another camera
Rotation).
File Deletion
A file cannot be
deleted.
The file may be protected. Unprotect the file (page 128).
Other
The wrong date
and time are
displayed, or the
wrong date and
time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 165).
The messages on
the display are in
the wrong
language.
The wrong display language is selected. Change the display
language setting (page 166).
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)The wrong USB communication protocol is selected. Select
the correct USB communication protocol in accordance with
the type of device you are connecting (pages 143, 152).
3)If the camera is not turned on, turn it on.
4)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
190
Appendix
Problem
Possible Cause and Recommended Action
Language selection 1)You did not configure initial settings after purchasing the
screen appears
camera or the camera may have been left with a dead
when the camera is
battery. Configure the correct settings (pages 19, 166).
turned on.
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 170). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory
defaults when I
remove the
camera’s battery.
Load the camera’s battery and reconfigure the time and date
settings (page 19). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera’s setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
Display Messages
B
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery is low.
Battery power is low.
Camera not in
standby.
Re-frame the image.
The camera could not go into auto record standby for some
reason during a Move Out CS or Move In CS operation.
Compose the image again with the boundary aligned
correctly (page 81).
Cannot find the file.
The image you specified with the slideshow “Images”
setting cannot be found. Change the “Images” setting (page
120) and try again.
Cannot register any
more files.
You are attempting to save a user BEST SHOT scene in
the “SCENE” folder when the folder already contains 999
user scenes.
191
Appendix
There is something wrong with the memory card. Turn off
the camera, remove the memory card and then reload it
into the camera. If this message re-appears when you turn
the camera back on, format the memory card (page 170).
Card ERROR
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
Check connections!
You are attempting to connect the camera to a printer while
the camera’s USB settings are not compatible with the USB
system of the printer (page 133).
Files could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
Folder cannot be
created.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 29).
Images are being
transferred.
Stop transfer and
turn off power?
You are attempting to turn off power while image data is
being transferred using the Eye-Fi card (page 156).
LENS ERROR
This message appears and the camera turns off whenever
the lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
LENS ERROR 2
The Anti Shake unit of the camera may be malfunctioning.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
Load paper!
The printer ran out of paper while printing.
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. When shooting with Prerecord CS,
this message indicates that there is not enough memory
capacity to record all of the pre-recorded images. Delete
files you no longer need (page 29).
192
Appendix
Printing Error
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Record Error
Image compression could not be performed for some
reason during image data storage. Shoot the image again.
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
The card is locked.
The LOCK switch of the SD or SDHC
memory card loaded in the camera is in the
locked position. You cannot store images to
or delete images from a memory card that is
locked.
There are no files.
There are no files in built-in memory or on the memory
card.
There are no
printing images.
Set up DPOF.
There are currently no files specified for printing. Configure
the required DPOF settings (page 136).
There is no image to
register.
The setup you are trying to save is for an image that cannot
be saved as a user BEST SHOT scene.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 170).
This file cannot be
played.
The file you are trying to access is corrupted or is a type
that cannot be displayed by this camera.
LOCK
This message will appear part way through an operation
This function cannot
when you attempt to use a function that is not allowed in
be used.
combination with another function.
193
Appendix
Number of Snapshots/Movie Recording Time
Snapshot
Image Size
(Pixels)
RAW+
(10M:
3648x2736)*3
10M
(3648x2736)
3:2
(3648x2432)
16:9
(3648x2048)
9M
(3456x2592)
7M
(3072x2304)
4M
(2304x1728)
2M
(1600x1200)
VGA
(640x480)
Image Quality
Approximate
Image File
Size
Built-in Memory
(Approx. 85.9MB*1)
Snapshot
Recording Capacity
SD Memory Card
(1GB*2) Snapshot
Recording
Capacity
Fine
21.8 MB
4
47
Normal
18.8 MB
5
56
Economy
17.7 MB
5
60
Fine
6.4 MB
13
151
Normal
3.38 MB
25
285
Economy
2.27 MB
36
424
Fine
5.6 MB
15
172
Normal
2.97 MB
28
324
Economy
2.0 MB
41
481
Fine
4.59 MB
18
210
Normal
2.46 MB
34
391
Economy
1.67 MB
49
576
170
Fine
5.66 MB
15
Normal
3.0 MB
28
321
Economy
2.02 MB
41
476
Fine
4.3 MB
19
224
Normal
2.31 MB
36
417
Economy
1.67 MB
49
576
Fine
2.5 MB
33
385
Normal
1.4 MB
59
687
Economy
1.0 MB
82
962
Fine
1.36 MB
61
707
Normal
890 KB
92
1080
Economy
570 KB
144
1687
Fine
430 KB
190
2236
Normal
290 KB
282
3314
Economy
240 KB
341
4005
194
Appendix
Movies
Movie
Mode
HD/STD
Image Quality
(Pixels) / (Audio)
Approximate Data
Rate (Frame Rate)
Built-in Memory SD Memory
(Approx.
Card (1GB*2)
85.9MB*1) Movie
Movie
Recording
Recording
Capacity
Capacity
File Size
of
1-minute
Movie
HD (1280x720)
(Stereo)
30 Megabits/second
(30 frames/second)
23 seconds
4 minutes
20 seconds
225 MB
STD (640x480)
(Stereo)
10 Megabits/second
(30 frames/second)
1 minute
9 seconds
12 minutes
44 seconds
75 MB
120 fps (640x480)
(No audio)
50 Megabits/second
(120 frames/second)
14 seconds
2 minutes
38 seconds
375 MB
240 fps (448x336)
(No audio)
50 Megabits/second
(240 frames/second)
14 seconds
2 minutes
38 seconds
375 MB
50 Megabits/second
(420 frames/second)
14 seconds
2 minutes
38 seconds
375 MB
25 Megabits/second
(1000 frames/second)
28 seconds
5 minutes
14 seconds
187.5 MB
30-120 fps
(640x480)
(Audio recording at
30 fps only)
12.5 Megabits/second
(30 frames/second)
50 Megabits/second
(120 frames/second)
55 seconds*4
10 minutes
93.7 MB*4
15 seconds*4
30-240 fps
(448x336)
(Audio recording at
30 fps only)
6.25 Megabits/second
(30 frames/second)
50 Megabits/second
(240 frames/second)
1 minute
48 seconds*4
19 minutes
46.8 MB*4
57 seconds*4
420 fps (224x168)
(No audio)
HS
Maximum
File Size
1000 fps (224x64)
(No audio)
Maximum
Movie
Size: 4GB
195
Appendix
Movie
Mode
Approximate Data
Rate (Frame Rate)
Built-in Memory
(Approx.
85.9MB*1) Movie
Recording
Capacity
SD Memory
Card
(Maximum
recording time
per recording)
YouTube (HS120)
(640x480)
(No audio)
50 Megabits/second
(120 frames/second)
14 seconds
2 minutes
30 seconds
YouTube (HS240)
(448x336)
(No audio)
50 Megabits/second
(240 frames/second)
14 seconds
1 minute
15 seconds
YouTube (HS420)
(224x168)
(No audio)
50 Megabits/second
(420 frames/second)
14 seconds
42 seconds
18 seconds
18 seconds
55 seconds*4
10 minutes*4
6.25 Megabits/second
(30 frames/second)
50 Megabits/second
(240 frames/second)
1 minute
48 seconds*4
10 minutes*4
YouTube (HD)
(1280x720)
(Stereo)
30 Megabits/second
(30 frames/second)
23 seconds
4 minutes
20 seconds
YouTube (STD)
(640x480)
(Stereo)
10 Megabits/second
(30 frames/second)
1 minute
9 seconds
10 minutes
Image Quality
(Pixels) / (Audio)
Maximum
File Size
YouTube (HS1000)
(224x64)
(No audio)
25 Megabits/second
Maximum (1000 frames/second)
YouTube
Movie Size:
Capture YouTube (HS30-120) 1024 MB 12.5 Megabits/second
x
480)
(30 frames/second)
(640
(or
Mode
(Audio recording at
10 minutes) 50 Megabits/second
30 fps only)
(120 frames/second)
YouTube (HS30-240)
(448x336)
(Audio recording at
30 fps only)
196
Appendix
*1 Built-in memory capacity after formatting
*2 The above values are based on use of a PRO HIGH SPEED SD memory card
(Panasonic Corporation). The number of images you can save depends on the type of
memory card you are using.
*3 RAW+ is the total file size of the RAW file and 10M (3648x2736) JPEG file. The image
quality setting applies to the JPEG file only.
*4 Recordable time when the entire movie is recorded at 30 fps. Recording time is shorter
if the 30 fps frame rate is switched to 120 fps or 240 fps during recording.
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 1GB.
• The time it takes to play back a high speed movie will be different from the time it takes to
record it. If you record a 240 fps high speed movie for 10 seconds, for example, it will
take 80 seconds to play it back.
197
Appendix
Specifications
File Format
Snapshots:
RAW (DNG*), JPEG (Exif Version 2.2); DCF 1.0 standard;
DPOF compliant
* DNG file format is one type of RAW image file, and it is
recommended by Adobe Systems for use as a standard
image file format.
Movies:
Motion JPEG AVI, IMA-ADPCM audio (stereo)
Recording Media
Built-in Memory (Image Storage Area: 85.9MB)
SD/SDHC
Recorded Image Sizes Snapshot:
RAW, 10M (3648x2736), 3:2 (3648x2432),
16:9 (3648x2048), 9M (3456x2592), 7M (3072x2304),
4M (2304x1728), 2M (1600x1200), VGA (640x480)
Movies:
HD (1280x720 30 fps), HS120 (640x480 120 fps),
HS240 (448x336 240 fps), HS420 (224x168 420 fps),
HS1000 (224x64 1000 fps), HS30-120 (640x480 30-120 fps
switchable), HS30-240 (448x336 30-240 fps switchable),
STD (640x480 30 fps)
Image Deletion
1 file; selected files; all files
1 CS group; 1 image in CS group; selected images in CS group
(with memory protection feature)
Effective Pixels
10.1 Megapixels
Imaging Element
Size: 1/2.3-inch square pixel high-speed CMOS
Total Pixels: 10.62 Megapixels
Lens/Focal Distance
(Snapshot)
F3.2 (W) to 5.7 (T) f = 4.3 to 43.0 mm
(equivalent to 24 to 240 mm in 35 mm format)
11 lenses in 10 groups, including aspherical lens.
Zoom
10X optical zoom, 4X digital zoom (40X in combination with
optical zoom)
57.0X maximum HD Zoom (in combination with optical zoom,
VGA size)
Focusing
Contrast Detection Auto Focus
• Focus Modes:
Auto Focus, Macro Focus, Infinity, Manual Focus
• AF Area:
Spot, Multi, Free, Tracking; with AF assist light
Approximate Focus
Range (Snapshot)
(From Lens Surface)
Auto Focus: 15 cm to 9 (5.9" to 9) (Wide Angle)
Macro Focus:
7 cm to 50 cm (2.8" to 19.7") (First step zoom from the Widest
Angle setting)
Infinity: 9 (Wide Angle)
Manual Focus: 15 cm to 9 (5.9" to 9) (Wide Angle)
* Range is affected by optical zoom.
Metering
Multi-pattern, center weighted, and spot by imaging element
198
Appendix
Exposure Control
Program AE, Aperture Priority AE, Shutter Speed Priority AE,
Manual Exposure
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
Shutter
CMOS electronic shutter, mechanical shutter
Shutter Speed
Snapshot (Auto): 1 to 1/2000 second
Snapshot (Aperture Priority AE): 1 to 1/2000 second
Snapshot (Shutter Speed Priority AE): 30 to 1/2000 second
Snapshot (Manual Exposure): 30 to 1/2000 second
* May differ due to the camera setup or shooting conditions.
* 1/40000-second shutter speed is possible only with High
speed Continuous Shutter, shutter speed priority AE or
manual exposure.
Aperture Value
F3.2 (W) to F7.5 (W) (When used with ND filter); aperture
changed by optical zoom or recording mode
White Balance
Auto, Daylight, Overcast, Shade, Day White Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity
(Standard Output
Sensitivity)
Snapshots:
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600,
ISO 3200 equivalent
Movies:
Auto (Movie when Manual Exposure mode: ISO 100, ISO 200,
ISO 400, ISO 800, ISO 1600, ISO 3200)
Self-timer
Approximate Trigger Times:
10 seconds, 2 seconds, Triple Self-timer
(Trigger time setting depends on CS mode being used.
Available settings depend on the REC mode being used.)
Flash Modes
Auto, Off, On, Red-eye reduction
Flash Range
0.4 m to 3.6 m (1.3' to 11.8') (Wide Angle)
(ISO Sensitivity: Auto) 0.5 m to 2.0 m (1.6' to 6.6') (Telephoto)
* Range is affected by optical zoom.
Flash Intensity
Adjustment
–2, –1, 0, +1, +2
Flash Charging Time
Approximately 5 seconds maximum
Movie Recording
Minimum Illumination
24 lx (HD/STD movie)
Recording
Snapshot, Normal Speed Continuous Shutter, High Speed
Continuous Shutter, Prerecord (Continuous Shutter),
F Continuous Shutter, BEST SHOT, Face detection, Self-timer,
High speed movie (For “30-120 fps” and “30-240 fps”, audio
recording supported during 30 fps recording only), HD Movie,
STD Movie, Prerecord (Movie), YouTube Capture Mode, CMOS
shift image stabilization
Monitor Screen
3.0-inch TFT color LCD (Super Clear LCD)
230,400 (960x240) dots
Viewfinder
Monitor Screen
199
Appendix
Timekeeping
Functions
Built-in quartz digital clock
Date and Time: Recorded with image data
Auto Calendar: To 2049
World Time
162 cities in 32 time zones
City name, date, time, summer time
Input/Output
Terminals
USB/AV port, Hi-Speed USB compatible
HDMI output (Mini)
Microphones
Stereo
Speaker
Monaural
Power Requirements
Rechargeable lithium ion battery (NP-90) x1
200
Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of Shots (CIPA) (Operating Time)*1
Continuous Playback
(Snapshots)*2
520 shots
5 hours
Approximate continuous movie recording time
(High speed movie)*3
3 hours
Approximate continuous movie recording time (HD Movie)*3
3 hours 10 minutes
• Battery: NP-90 (Rated Capacity: 1950 mAh)
• Recording Medium: 1GB SD memory card (PRO HIGH SPEED (Panasonic
Corporation))
• Measurement Conditions
*1 Approximate number of shots (CIPA) (Operating Time)
In accordance with CIPA (Camera and Imaging Products Association) standards
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and
full telephoto every 30 seconds, during which two images are shot with flash; power
turned off and back on every time 10 images are shot.
*2 Approximate playback time
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds
*3 Approximate time using a 16GB SDHC memory card for a repeated cycle of 10 minutes
recording followed by deletion of the recorded file.
• The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
• Frequency of flash, zoom, High Speed Continuous Shutter, and Auto Focus usage,
and the time the camera is on greatly affects recording time and number of shots
values.
Power Consumption
3.7 V DC, Approximately 3.4 W
Dimensions
105 (W) x 63.2 (H) x 29.9 (D) mm
(4.1" (W) x 2.5" (H) x 1.2" (D))
(29.0 mm (1.14") thick excluding projections)
Weight
227 g (8.0 oz) (including battery and memory card)
183 g (6.5 oz) (excluding battery and memory card)
201
Appendix
. Rechargeable lithium ion battery (NP-90)
Rated Voltage
3.7 V
Rated Capacitance
1950 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
Dimensions
34.0 (W) x 52.3 (H) x 10.9 (D) mm
(1.34" (W) x 2.06" (H) x 0.43" (D)) (excluding projections)
Weight
Approximately 42 g (1.5 oz)
. Charger unit (BC-90L)
Input Power
100 to 240 V AC, 200 mA, 50/60 Hz
Output Power
4.2 V DC, 1000 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Supported Battery Type
Rechargeable lithium ion battery (NP-90)
Charging Time
200 minutes
Dimensions
57 (W) x 24 (H) x 96 (D) mm
(2.2" (W) x 0.94" (H) x 3.8" (D)) (excluding projections)
Weight
Approximately 70 g (2.5 oz)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
202
Appendix
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MF
MA1003-B
Download PDF

advertising