Specifications | Epson 5350 Projector User Manual

COLOUR TELEVISION
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
AV-29V314
AV-29V334
AV-21C314
AV-21D314
AV-21W314
AV-21Y314
AV-21V314
AV-21V334
AV-25V314
AV-25V334
Knowing your TV’s features ....................................................... 3
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture .............................................................. 9
Advanced setting for picture ..................................................... 11
Basic setting for sound ............................................................. 12
Advanced setting for sound ..................................................... 13
Favorite channel and video setting .......................................... 14
Customized setting .................................................................. 15
TV channel presetting .............................................................. 17
Additional preparation .............................................................. 20
Troubleshooting ....................................................................... 22
Specifications ........................................................................... 23
INSTRUCTIONS
GGT0051-001A-E
GGT0051-001A-E(01-10)
1
6/21/04, 9:17 AM
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF THIS TV.
1 Operate only from the power source indicated on the rear of the TV.
2 Avoid damaging the power cord and mains plug. When unplugging the
TV, grasp the mains plug. Do not pull on the power cord.
3 Never block or cover the ventilation openings.
Never install the TV where good ventilation is unattainable.
When installing this TV, leave spaces for ventilation around the TV of
more than the minimum distances as shown.
7 If you are not going to use this TV for a long period of time, be sure to
disconnect the AC plug from the AC socket.
8 The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
WARNING: <AV-21W314/AV-21Y314 only>
A REMOVABLE PLASTIC COVER IS FIXED TO THE
TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO
PREVENT THIS COVER FROM BEING ACCIDENTALLY
SWALLOWED BY BABIES OR CHILDREN, REMOVE IT
FROM THE TELEVISION AND STORE IT IN A SAFE
PLACE. IF THE COVER IS SWALLOWED SEEK THE
ADVICE OF A DOCTOR IMMEDIATELY.
15 cm
10 cm
10 cm
15 cm
4 Do not allow objects or liquid into the cabinet openings.
5 In the event of a fault, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
6 The surface of the TV screen is easily damaged. Be very careful with it
when handling the TV. Should the TV screen become soiled, wipe it
with a soft dry cloth. Never rub it forcefully. Never use any cleaner or
detergent on it.
2
GGT0051-001A-E(01-10)
2
6/21/04, 9:17 AM
Knowing your TV’s features
Main features
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
AI ECO
TV detects the brightness of your room and automatically adjust the picture brightness to a
suitable level for a better eye care.
AI VOLUME
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
change of the volume when selecting different TV channel.
VNR
You can reduce the picture noise when viewing noisy TV programmes or video sources.
WHITE BALANCE
You can choose one of three tones of white to match the video source such as movie,
sports, etc. Changing WHITE BALANCE affects the appearance of all other colours on the
screen.
CHILD LOCK
To prevent accidental operation by your child, you can disable the control buttons on the
TV.
5
Function
*PICTURE BOOSTER
*ECO
*BASS
AV-29V314
AV-25V314
AV-21V314
AV-21W314
AV-21C314
AV-21Y314
AV-21D314
–
_
_
–
_
_
–
_
–
–
_
–
–
_
–
–
–
–
_
–
–
_
–
–
–
*CINEMA SURROUND
*SOUND TURBO
PICTURE TILT
_
_
_
_
_
–
_
_
_
_
_
–
_
_
–
_
_
–
–
_
–
–
_
–
–
COMPRESS (16:9)
_
_
_
_
_
–
–
_
Model No.
No.
1
2
3
4
5
AV-25V334
AV-21V334
3
4
AV-29V334
1
2
Confirm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. The
model number is indicated at the rear of your TV. When you press a button concerned to a function that is
not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is
not available for your TV, it is not displayed in the menu.
3
GGT0051-001A-E(01-10)
3
6/21/04, 9:17 AM
Remote control buttons and basic functions
1
2
3
4
5
6
7
8
No. Press
POWER
MENU/OK
5/∞/2/3
CHANNEL -/+
VOLUME -/+
TV/VIDEO
MUTING
9
Ä
DISPLAY
0~9, -/-RETURN +
To
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
Select and adjust menu function.
Select the desired channel number.
Adjust the volume level.
Select TV or video terminal input.
Turn off the volume.
Press this button again to resume the volume.
Display the programme number or video terminal number and PR list (channel list) on the
screen.
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are
indicated with coloured mark.
Select the programme number. For two digits programme number, press -/--, then press the
number button.
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
4
GGT0051-001A-E(01-10)
4
6/21/04, 9:17 AM
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
To
Operation
Display the MENU
Press the MENU/OK button
MENU
Note
2.
To exit the MENU,
press the DISPLAY
button
or choose
EXIT menu.
8
3
3
Display the top
menu
to
Press 5/∞ buttons
to choose a Press ∞ button
menu title. Then press MENU/OK display the next page
for more functions.
button .
Display the 2nd
menu
Press 5/∞ buttons
to choose a
menu title. Then press MENU/OK
button .
Display the 3rd
menu
Press 5/∞ buttons
to choose a
menu title. Then press MENU/OK
button .
Return to the
previous menu
Press the DISPLAY button
Choose the setting
of a function
Press 5/∞ buttons
to choose
a function. Then press the 2/3
buttons
to change the setting.
Adjust the effect
level of a function
Press 5/∞ buttons
to choose
a function. Then press the 2/3
buttons
to adjust the effect
level.
2
3
2
3
2
3
3
8.
3
3
–
2
Press the MENU/OK
button
to exit from
the menu.
3
Display the sub
Press the 5/∞ buttons
to
menu of a function. choose a function. Then press
MENU/OK buttons
to display
the sub menu.
2
–
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
2nd menu
MENU
Top menu
MENU
2nd menu
Top menu
Top menu
INPUT
2nd menu
EXT. INPUT
DISPLAY
PICTURE
PICTURE MODE
*If you want to PICTURE SETTING
adjust PICTURE WHITE BALANCE
SETTING menu,
PICTURE
you must set
PICTURE MODE FEATURES
menu to USER.
Location 3rd menu
P.16
–
P.16
–
P.9
–
P.10
–
P.10
–
–
VNR
FAVORITE CH SETTING
VIDEO SETTING
COLOUR SYSTEM
PICTURE BOOSTER
COMPRESS (16:9)
PICTURE TILT
SOUND
AI VOLUME
P.13
–
*If you want to SOUND MODE
P.12
–
adjust
EQUALIZER
P.13
–
EQUALIZER
P.12
–
menu, you must BALANCE
SOUND TURBO
P.12
–
set SOUND
MODE menu to CINEMA SURROUND P.13
–
USER.
SUPER BASS
P.12
–
FEATURES
OFF TIMER
P.15
–
CHILD LOCK
P.15
–
AI ECO SENSOR P.11
–
INSTALL
AUTO PROGRAM P.17
–
EDIT/MANUAL
P.17
DELETE, MOVE,
MANUAL,INSERT
LANGUAGE
P.15
LANGUAGE
BLUE BACK
P.11
–
AUTO SHUTOFF
P.16
–
VIDEO-2 SETTING P.16
–
AI ECO DISPLAY P.11
–
EXIT
–
–
–
Location
–
–
–
–
–
P.15
P.14
P.14
P.9
P.10
P.11
P.11
–
–
–
–
–
–
–
–
–
–
–
P.17P.18
P.15
–
–
–
–
–
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
5
GGT0051-001A-E(01-10)
5
6/21/04, 9:17 AM
TV buttons and functions
The illustrations shown below is for AV-29V334 and
AV-21C314 series only, which are used for explanation
purpose.
Your TV may not look exactly the same as illustrated.
Front of the TV
AV-29V334
!
9
V
L/MONO
8 7
R
MENU
OK
IN (VIDEO-3)
CHANNEL
6 5
VOLUME
43 2
1
POWER
TV/VIDEO
EXIT
AV-21C314
!
9
8
7
6
MENU
CHANNEL
VOLUME
4
2
POWER
V
L / MONO
IN (VIDEO-2)
R
OK
VIDEO-1
INPUT
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
INPUT
OUTPUT
How to operate the menus with the TV button
TV button
OVER
Y/
V
BASS
SPEAKER L
/MONO CB
OUT
L/
CR
R
R
& %
3
4
5
6
7
8
9
Ä
Å
Ç
É
OUTPUT
S
V
1
2
Ñ
Ö
AV-21C314
AV-29V334
1
No. Button/terminal Description
Page
L (main power) Press to turn on or turn off the TV’s main power.
–
POWER lamp
Indicate the TV is being turned on or off.
–
No colour: TV’s main power is being turned off.
Red:
TV’s main power is being turned on.
Note: When you turn off the power switch while TV is in standby
mode, the light of power lamp will be off in 10 -15 seconds.
ECO sensor
–
Remote control sensor
–
TV/ VIDEO
Press to select TV or video mode.
–
VOLUME -/+
Press to adjust the volume level.
–
CHANNEL -/+
Press to select the desired channel.
–
MENU
Press to display the menu.
–
IN (VIDEO-3)
Video and audio input jacks for VIDEO-3 mode.
20
Headphone jack.
20
Aerial socket.
7
OUTPUT
Video and audio output jacks. (The component video
signal cannot be output.)
20
COMPONENT
Video or component video, and audio input jacks for
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
the “VIDEO-2 SETTING” function (see page 16).
20
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1
mode
7
BASS SPEAKER Twin Port Bass Blaster Unit output terminal.
21
OUT
MONO
$
V
V
L
L/
R
R
R
%
#
#
"
V
MONO
MENU
L
"
Work as same as the button on the
remote control unit
MENU/OK button
CHANNEL -/+ ∞/5 button
VOLUME -/+ 2/3 button
6
GGT0051-001A-E(01-10)
6
6/21/04, 9:17 AM
Note
To display main menu and exit
menu after finish setting.
To select menu function.
To adjust the desired function.
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
VIDEO-1
INPUT
1
Connecting the aerial cable.
COMPONENT
(VIDEO-2)
INPUT
OUTPUT
S
(1)
VHF/UHF outdoor aerial
OVER
Matching aerial
adapter (supplied)
To audio
output
To RF
output
V
Y/
V
V
To video
output
L/
MONO CB
L/
R
CR
R
MONO
L
R
(2)
To S-video
output
VCR
To aerial input
VHF/UHF outdoor aerial
Rear of TV
The illustration shown is just a sample. It may not be same as your TV.
(3)
75-ohm coaxial cable (not supplied)
2
Connecting the compatible main plug to the AC
outlet.
3
Inserting batteries into the remote control.
Insert two batteries by following the + and polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• It the remote control does not work properly, fit new
batteries. The supplied batteries are for testing, not regular use.
4
Turn on the TV by pressing the main
power button.
JVC logo appears on the screen.
Indoor aerial
Matching
aerial
adapter
(supplied)
Rod aerial
Aerial holder
Rear of AV-21V314
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with the aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
7
GGT0051-001A-E(01-10)
7
6/21/04, 9:17 AM
Setting up your TV (continued)
5
Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following setps as below:
LANGUAGE
EDIT
AUTO PROGRAM
AUTO PROGRAM
ENGLISH
PR
7
8
9
10
11
12
13
SETUP TOUR RESTART?
CH 12
22%
OK
■
RESTART
NO
CH/CC
CH 09
CH 11
CH 13
■
BACK ■
BACK ■
OK
OK
OK
.
• Press 5/∞ button to
select your desired
language, then press
MENU/OK button.
• TV will start searching
for the channels.
To stop AUTO
PROGRAM, press
MENU/OK button.
• Press the red button to
cancel the SETUP TOUR
RESTART function.
If you want to make initial
settings again when the
next time you turn on the
TV, press the MENU/OK
button to activate the
SETUP TOUR RESTART
function.
MOVE
3
.
■INSERT
■DELETE
■MANUAL
• To complete the initial
setting, press the
MENU/OK button. To
edit the channel list,
see page 17.
If the JVC logo does not appear, use LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are
located in the INSTALL menu.
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
8
GGT0051-001A-E(01-10)
8
7/1/04, 5:56 PM
Basic setting for picture
COLOUR SYSTEM
PICTURE MODE
You can select the appropriate colour system when the picture is
not clear or no colour appears.
Press the COLOUR SYSTEM button to select a setting.
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
You can choose the desired picture setting with one-touch.
Press the PICTURE MODE button to select a setting.
SOFT
BRIGHT
STANDARD
USER
To operate this function with a menu:
❇ MENU
PICTURE menu
PICTURE FEATURES menu
COLOUR SYSTEM
For the colour system in each country or region, see the table
below:
Area
Asia, Middle
East
Europe
Oceania
Africa
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
China, Vietnam, etc.
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
Egypt, Morocco, etc.
System
PAL
PAL
PAL
SECAM
NTSC
SECAM
PAL
PAL
PAL
PAL
PAL
PAL
SECAM
Softens contrast and sharpness.
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting as you like.
Select USER and adjust following items in the
PICTURE SETTING menu. (CONTRAST, BRIGHT,
SHARP, COLOUR, TINT*)
*TINT can only be adjusted in NTSC system.
To operate this function with a menu:
❇ MENU
PICTURE menu
PICTURE MODE
To return the USER setting to the default, press the blue button
when the PICTURE SETTING menu appears.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
9
GGT0051-001A-E(01-10)
9
6/21/04, 9:17 AM
Basic setting for picture (continued)
Adjusting the picture – USER
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
1 Select the USER in PICTURE MODE under PICTURE menu.
❇ MENU
USER
PICTURE menu
PICTURE MODE
the setting.
CONTRAST
BRIGHT
SHARP
COLOUR
TINT*
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
❇ MENU
2 Select the PICTURE SETTING in PICTURE menu, then adjust
❇ MENU
WHITE BALANCE
PICTURE menu
2 : Lower contrast
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
PICTURE SETTING
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
NORMAL
COOL
WARM
PICTURE menu
Normal white balance.
Bluish white.
Reddish white.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due
to the low signal reception.
Press the PICTURE BOOSTER button to select the desired
mode.
HIGH
LOW
OFF
Perform at maximum level.
Perform at minimum level.
Cancel the function
To operate this function with a menu:
❇ MENU
PICTURE menu
PICTURE BOOSTER
PICTURE FEATURES menu
10
GGT0051-001A-E(01-10)
10
WHITE BALANCE
6/21/04, 9:17 AM
Advanced setting for picture
2 Press the 5/∞ buttons until the picture become level. Then
AI ECO SENSOR (ECO)
You can adjust TV screen contrast according to the brightness of
your room.
Press the ECO button to select the desired mode.
1
2
OFF
Mild contrast (recommended).
Even contrast.
Cancel the function.
To operate this function with a menu:
❇ MENU
FEATURES menu
AI ECO SENSOR
You can display the graphic of AI ECO SENSOR on the screen.
Select the AI ECO DISPLAY in the INSTALL menu, then choose
ON or OFF.
❇ MENU
INSTALL menu
AI ECO DISPLAY
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the earth’s magnetic force.
1 Select the PICTURE TILT in the PICTURE FEATURES menu
under PICTURE menu, then press MENU/OK button.
❇ MENU
PICTURE menu
PICTURE FEATURES menu
press the MENU/OK button.
COMPRESS (16:9)
You can convert a normal picture (4:3 aspect ratio) into a wide
picture (16:9 aspect ratio).
Select the COMPRESS (16:9) in the PICTURE FEATURES menu
under PICTURE menu, then choose ON or OFF.
❇ MENU
PICTURE menu
COMPRESS (16:9)
PICTURE FEATURES menu
BLUE BACK
You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent, or when there is
no input from an antenna.
Select the BLUE BACK in the INSTALL menu, then choose ON or
OFF.
❇ MENU
INSTALL menu
BLUE BACK
PICTURE TILT
The following display appears.
PICTURE TILT
If you wish to continue viewing the poor picture, cancel the BLUE
BACK function.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
BACK ■
OK
.
GGT0051-001A-H(11-20)
11
11
6/17/04, 11:23 AM
Basic setting for sound
SOUND MODE
SOUND SYSTEM
You can select an appropriate sound system when abnormal
sound occurs even when the picture appears normally.
Press the SOUND SYSTEM button to select a setting.
B/G
I
D/K
❇ MENU
M
This function is not available in video mode.
For the sound system in each country or region, see the table below:
Area
Asia, Middle
East
Europe
Oceania
Africa
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
China, Vietnam, etc.
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
Egypt, Morocco, etc.
B/G
D/K
I
B/G
M
D/K
D/K
B/G
I
B/G
I
B/G
B/G
DYNAMIC
MUSIC
NEWS
SOUND menu
Press the BASS button to select ON or OFF.
To operate this function with a menu:
You can change this sound setting as you like.
Select USER and adjust the frequencies in EQUALIZER
(100, 300, 1K, 3K, 8K Hz).
For details, see “EQUALIZER” on page 13.
Emphasize on both vocal sound and music.
Emphasize on music effect.
Emphasize on vocal sound.
BALANCE
You can adjust the volume balance between the left and right
speakers.
Select the BALANCE in SOUND menu, then adjust the setting.
❇ MENU
SOUND menu
SUPER BASS
Press the SOUND TURBO to select ON or OFF.
To operate this function with a menu:
❇ MENU
SOUND menu
SOUND TURBO
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
12
12
BALANCE
SOUND TURBO
For attaching the Twin Port Bass Blaster unit, please see in page
21.
GGT0051-001A-H(11-20)
SOUND MODE
You can enjoy the emphatic low and high frequency levels.
You can enjoy powerful bass sound with the Twin Port Bass
Blaster unit.
SOUND menu
USER
System
SUPER BASS (BASS)
❇ MENU
You can choose the desired sound setting.
Select the SOUND MODE in SOUND menu, then choose the
setting.
6/17/04, 11:23 AM
Advanced setting for sound
CINEMA SURROUND
EQUALIZER
You can enjoy an enhanced sound for wider audience.
Press the CINEMA SURROUND button to select a setting.
Cancel the function.
Listen to sound with less wider audience effect.
Listen to sound with more wider audience effect.
Listen to mono sound with stereo effect.
To operate this function with a menu:
SOUND MODE
❇ MENU
USER
SOUND menu
EQUALIZER
The following display appears.
CINEMA SURROUND
IIIIIIIIIIII
If you use CINEMA SURROUND and SOUND TURBO together,
volume distortion might occurs.
IIIIIIIIIIIIIIIIIIIIIIIII
EQUALIZER
If slight volume distortion occurs when you select HIGH mode,
change the setting to LOW mode. The CINEMA SURROUND
effect will be less noticeable.
IIIIIIIIIIIIIIIIIIIIIII
SOUND menu
SOUND menu
2 Select the EQUALIZER in SOUND menu.
IIIIIIIIIIIIIIIII
❇ MENU
❇ MENU
IIIIIIIIIIII
OFF
LOW
HIGH
MONO
You can adjust the sound level of each frequencies when selecting
USER mode in SOUND MODE.
1 Select the USER in SOUND MODE under SOUND menu.
100
300
1K
3K
8K Hz
BACK ■
OK
.
3 Select and adjust the desired frequencies.
4 Press the MENU/OK button to exit the menu.
Adjust high frequency will affect higher pitch sound and vice versa.
AI VOLUME
You can adjust the volume of all the channels and video inputs to
the same level automatically.
Select the AI VOLUME in SOUND menu, then choose ON or OFF.
❇ MENU
SOUND menu
AI VOLUME
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
13
GGT0051-001A-H(11-20)
13
6/17/04, 11:23 AM
Favorite channel and video setting
4 Select the desired item that you wish to adjust.
To register the favorite channel
You can register and recall 4 favorite channels by using the
colour buttons (red, green, yellow, blue).
1 In TV mode, select a TV channel (PR01-99) you desired to register.
2 Press and hold a colour button for 3 seconds or more.
“FAVORITE CHANNEL ■ PROGRAMMED!” appears on the
screen and current channel is registered.
3 To register other favorite channels, repeat Step 1 to 2.
To recall the favorite channel, press the colour button.
When the TV is in menu mode, favorite channel function is not
available.
SHARP
COLOUR
5 Press the MENU/OK button to exit the menu.
To adjust the video setting (VIDEO SETTING)
You can adjust the picture and sound settings for video inputs.
1 Display the PICTURE menu and select VIDEO SETTING in
PICTURE FEATURES menu.
❇ MENU
PICTURE menu
PICTURE FEATURES menu
VIDEO SETTING
PICTURE FEATURES menu
❇ VIDEO SETTING
VIDEO STATUS
3 Select EFFECT, then press 2/3 button
VIDEO SETTING
to choose ON.
To cancel the settings, choose OFF.
VIDEO STATUS
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
SOUND MODE
EFFECT
FAVORITE CH SETTING
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING
menu, then choose the desired favorite channel.
❇ FAVORITE CH SETTING
BACK ■
to choose ON.
To cancel the settings, choose OFF.
BACK ■
OK
.
14
GGT0051-001A-H(11-20)
14
USER
ON
■RESET
.
4 Select the desired item that you wish to adjust.
FAVORITE CH SETTING
FAVORITE CHANNEL
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
SOUND MODE
EFFECT
VIDEO-1
OK
FAVORITE CHANNEL
3 Select EFFECT, then press 2/3 button
TINT
choose the desired video input.
You can adjust the picture and sound settings for the favorite channels.
1 Display the PICTURE menu and select FAVORITE CH
SETTING in PICTURE FEATURES menu.
PICTURE menu
BRIGHT
2 Select VIDEO STATUS in VIDEO SETTING menu, then
To adjust favorite channel setting
(FAVORITE CH SETTING)
❇ MENU
CONTRAST
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
■ PR 01
CONTRAST
BRIGHT
SHARP
COLOUR
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
USER
ON
TINT
5 Press the MENU/OK button to exit the menu.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
6/17/04, 11:23 AM
Customized setting
VNR
CHILD LOCK
You can reduce the noise.
Select the VNR in the PICTURE FEATURES menu under
PICTURE menu, then choose a setting of VNR function.
❇ MENU
PICTURE menu
PICTURE FEATURES menu
You can disable the front control buttons of the TV.
Select the CHILD LOCK in the FEATURES menu, then choose
ON or OFF.
❇ MENU
FEATURES menu
CHILD LOCK
VNR
OFF TIMER
OFF
AUTO
MIN
MAX
VNR is turned off.
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
You can set the TV to turn off automatically to standby mode after
a set time.
Press the OFF TIMER button to select a desired period of time.
OFF TIMER
If you select MAX, the picture becomes softer even if the original
picture is sharp.
0
120
10
LANGUAGE
You can choose your desired on screen display language.
Select the LANGUAGE in the INSTALL menu, then choose a
language.
❇ MENU
INSTALL menu
LANGUAGE
You can set the period of time
to a maximum of 120 minutes
in 10 minutes step.
BACK ■
OK
.
To operate this function with a menu:
❇ MENU
FEATURES menu
OFF TIMER
When the elapsed of time left one minute, “GOOD NIGHT!”
appears on the screen.
You can display the OFF TIMER menu again to confirm or
change the remaining time.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
15
GGT0051-001A-H(11-20)
15
6/17/04, 11:23 AM
Customized setting (continued)
EXT. INPUT (TV/VIDEO)
AUTO SHUTOFF
You can set the TV to turn off automatically when no signal is
received for about 15 minutes or longer after the end of a
broadcast.
Select AUTO SHUTOFF in INSTALL menu, then choose ON or
OFF.
❇ MENU
INSTALL menu
AUTO SHUTOFF
The AUTO SHUTOFF function does not turn off the TV’s main
power.
The AUTO SHUTOFF function is not available in video mode.
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
❇ MENU
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
ON
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting.
VIDEO
COMPONENT
INSTALL menu
VIDEO-2 SETTING
EXT. INPUT
DISPLAY
VIDEO-2 SETTING
❇ MENU
INPUT menu
OFF
PR LIST
Choose a TV channel or a VIDEO terminal.
1 Press the DISPLAY button to display the PR LIST.
2 Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
then press MENU/OK button.
PR LIST
If a normal video signal (composite video signal) is
input.
If a component video signal (Y/CB/CR) is input.
PR
AV
1
2
3
4
5
6
For connecting methods, see “Additional Preparation” on page
20.
CH/CC
■
■
■
■
CH 03
CH 05
CH 07
CH 09
CC 04
CC 05
OK
-7
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
INPUT menu
DISPLAY
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
16
GGT0051-001A-H(11-20)
To operate this function with a menu:
❇ MENU
+7
.
16
6/17/04, 11:23 AM
.
TV channel presetting
To register the TV channels automatically
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
You can register the TV channels into the TV’s channel list
automatically.
1 Display the INSTALL menu.
❇ MENU
EDIT
PR
7
8
9
10
11
12
13
INSTALL menu
2 Choose AUTO PROGRAM, then press the MENU/OK button.
3
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR list) automatically.
“SETUP TOUR RESTART?” appears.
To start the SETUP
TOUR
To skip the SETUP
TOUR
Press the MENU/OK button. Then proceed to
step 5 of “Setting up your TV” on page 8.
Press the Red button.
4 The EDIT menu appears.
To edit the channel
list
If a channel is not
registered
To exit the menu
Proceed to the Step 3 of “To edit the channel
list (PR LIST)” on page 18.
Proceed to the Step 3 of “To register the
TV channels manually” on this page.
Press the MENU/OK button.
For details of “SETUP TOUR”, see page 8.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s channel list manually.
1 Display the INSTALL menu.
❇ MENU
INSTALL menu
CH/CC
CH 09
CH 11
CH 13
■
BACK ■
OK
.
MOVE
3
■INSERT
■DELETE
■MANUAL
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
5
6
7
The sound system of the channel appears at the right of the
CH/CC number.
Press the 3 button to choose an appropriate sound system.
For details, see “SOUND SYSTEM” on page 12.
Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
Repeat step 5 until your desired TV channel appears
If the reception is poor
Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
8 Press the MENU/OK button to exit the menu.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
17
GGT0051-001A-H(11-20)
17
6/17/04, 11:23 AM
TV channel presetting (continued)
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR numbers will be
changed.
1 Display the INSTALL menu.
❇ MENU
INSTALL menu
2 Choose EDIT/MANUAL, then press the MENU/OK button.
❇ MENU
INSTALL menu
EDIT menu appears.
EDIT
PR
7
8
9
10
11
12
13
CH/CC
CH 09
CH 11
CH 13
■
BACK ■
OK
.
MOVE
3 Choose the PR number for which you will register a new TV
3
■INSERT
■DELETE
■MANUAL
3 Choose the channel which you want to change PR number, or
delete.
4 Do the following action:
To delete the
channel (DELETE)
You can add in the new channel in the TV channel list as you like.
You need to find the “CH/CC” number for the TV channel. Find the
“CH/CC” number corresponding to the channel number of the TV
channel from the attached sheet “CH/CC number list” on page 19.
1 Display the INSTALL menu.
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
To change the PR
number (MOVE)
To add in the new channel
(INSERT in the EDIT menu)
Press the 3 button. Then move it to the PR
number you want to use it for the channel.
Finally press the 2 button.
Press the yellow button.
5 Press the MENU/OK button to exit the menu.
channel. When you add a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to change the sound
system to M. Then proceed to the next step.
4 Press the green button, then press 5/∞ buttons to choose
“CC” or “CH”.
5 Press the number button to enter the remaining CH/CC
number.
The TV starts to search the TV channel, and the picture of the
TV channel appears. If the TV finds no TV channel, a noisy
picture appears.
When a TV channel has already been registered in PR99, using
the INSERT function deletes that TV channel.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
18
GGT0051-001A-H(11-20)
18
6/17/04, 11:23 AM
TV channel presetting (continued)
CH/CC number
When you want to use the INSERT
function on page 18, find the CH/CC
number corresponding to the channel
number of the TV channel from this table.
Channel No.
US
CCIR
OIRT
AUSTRALIA
Country
United States, Philippines, etc..
Middle East, Southeast Asia,
etc..
Eastern Europe, Russia,
Vietnam, etc..
Australia, etc..
Channel
CH
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
US
US-2
US-3
US-4
US-5
US-6
US-7
US-8
US-9
US-10
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
CCIR
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
OIRT
R1
R2
R6
R7
R8
R9
R10
R11
R12
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
AUSTRALIA
AU-0
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
AU-10
AU-11
CH
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
CCIR
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
OIRT
AUSTRALIA
CC
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
US
CCIR
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
S-9
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
OIRT
AUSTRALIA
AU-5
A
B
C
D
AU-5A
CC
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
US
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
CCIR
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
X
Y
Z
Z+1
Z+2
OIRT
R3
R4
R5
AUSTRALIA
AU-3
AU-4
A-5
A-4
A-3
A-2
A-1
19
GGT0051-001A-H(11-20)
19
6/17/04, 11:23 AM
Additional preparation
The illustrations shown in this section are for AV-29V334 and AV21C314 only, which are used for explanation purpose. Your TV
may not look exactly the same as illustrated.
Connecting to rear component/video input
terminal and output terminal
Rear of TV
Before connecting
• Read the manuals provided with the devices for the proper
connection.
• Turn off all the devices including the TV.
• Note that connecting cables are not supplied.
AV-29V334
VIDEO-1
INPUT
AV-29V334
Camcorder or TV game
L/MONO
V
R
IN (VIDEO-3)
Headphones
VCR (for recording)
OVER
V
Y/
V
BASS
SPEAKER L
/MONO CB
OUT
L/
CR
R
R
Front of TV
MONO
L
DVD player
(component video signals)
R
Rear of TV
AV-21C314
VIDEO-1
INPUT
MENU
OK
VCR (for playing)
DVD player (composite signals)
OUTPUT
S
V
Connecting to front video input terminal
COMPONENT
(VIDEO-2)
INPUT
OUTPUT
VCR (for playing)
AV-21C314
MENU
V
L / MONO
IN (VIDEO-2)
R
OK
V
L/
R
V
MONO
L
VCR (for recording)
R
When you use VIDEO-1 INPUT, you should choose to connect
S-VIDEO or video input. If S-VIDEO connector and video input
are connected at the same time, no picture displays on the
screen and the message “PLEASE DISCONNECT VIDEO-1
CABLE!” appears. In this case, you should disconnect either SVIDEO or video input.
When connecting to COMPONENT (VIDEO-2) input, depending
on the connection, choose the appropriate video input using the
menu (see page 16).
20
GGT0051-001A-H(11-20)
20
6/17/04, 11:23 AM
.
Additional preparation (continued)
Attaching the Twin Port Bass Blaster Unit
<AV-29V334/AV-25V334/AV-21V334 only>
The Twin Port Bass Blaster Unit is packaged together with the TV.
Before you use the TV, mount the Twin Port Bass Blaster unit
correctly on the TV.
• The SUPER BASS (BASS) function do not work unless the
Twin Port Bass Blaster Unit is connected correctly to the TV.
For details on the SUPER BASS (BASS) function, see page
12.
1 Place the unit on top of the TV making sure that the mounting
pin on the bottom of the unit fits into the mounting hole on the
top of the TV.
• When you mount the unit, make sure that the mounting pin
fits properly into the mounting hole. Otherwise, it may slide
off the top of the TV. This may cause damage or cause
unexpected injury.
CAUTION:
The Twin Port Bass Blaster Unit is just placed on top of the TV
and is not held in place by a screw. When using the unit, pay
attention to the following cautions. Otherwise, the unit or TV may
fall over and be damaged, or cause unexpected injury.
• Do not rest your hands or elbows on the Twin Port Bass
Blaster Unit.
• Do not move the TV with the Twin Port Blaster Unit mounted
on top of the TV. Before you move the TV, be sure to remove
the unit.
• Do not move the TV by holding the Twin Port Bass Blaster
Unit.
2 Firmly insert the Twin Port Bass Blaster Unit connector into
the BASS SPEAKER OUT terminal.
VIDEO-1
INPUT
Twin Port
Bass Blaster
Unit
COMPONENT
(VIDEO-2)
INPUT
OUTPUT
S
OVER
Y /V
V
BASS
SPEAKER
L / MONO C B
OUT
L / MONO L
V
R
CR
R
R
21
GGT0051-001A-H(21-24)
21
6/17/04, 11:25 AM
Troubleshooting
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
• No picture,
no sound
• Deactivate the BLUE BACK function if it is turned
on.
• Choose the appropriate sound system. Refer to
“SOUND SYSTEM” on page 12.
• Snowy picture
• Check the aerial cable and its connection with the
TV.
• Stripes appear on
the picture
• Interference occurs caused by other devices such
as an amplifier, personal computer, or a hair drier.
Move such devices away from your TV.
• Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use a better directionality
antenna.
• Poor picture
• Choose the appropriate colour system. Refer to
“COLOUR SYSTEM” on page 9.
• Adjust the COLOUR or BRIGHT setting. Refer to
“Adjusting the picture - USER” on page 10.
• White and bright still • Inevitable phenomenon due to the nature of the
picture tube. This is not a malfunction.
image look as if it
were coloured
• Top of the image
from software
products or video
tape is distorted
• This is due to the condition of the video signal
whereby the image was not recorded properly.
This is not a malfunction.
• Poor sound
• Adjust the sound frequency properly. Refer to
“EQUALIZER” on page 13.
• Cannot operate the • The batteries may be exhausted. Replace with
remote control
new batteries (see page 7).
• Ensure that you are operating the remote less
than seven meters from the front of your TV.
• Cannot operate the • Press TV/VIDEO button to return to TV mode and
menus
try operating the menus.
• Cannot operate the • Deactivate the CHILD LOCK function if it is turned
front control buttons on (see page 15).
• TV is turned off
suddenly
• This may due to the AUTO SHUT OFF function is
activated. Press the POWER button to turn on the
TV.
• Colour patches
• This may due to the magnetized device such as a
appear at the corner speaker near to your TV. Keep the device apart
of the screen
from your TV. Alternately, you can also use the
magnetic-shielded speaker.
• Picture is tilted
• This may due to the earth magnetism. Refer to
“PICTURE TILT” on page 11 to correct the tilt.
• Image takes a short • Image required time to stabilize before display.
period to be
This is not a malfunction.
displayed
• TV may emitted
crackling sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling sound
is too frequent, request your service technician for
inspection.
• Feel a slight electric • This is due to the static electricity of the picture
shock when
tube and it will not harm the human body. This is
touching the TV
not a malfunction.
screen
22
GGT0051-001A-H(21-24)
22
6/17/04, 11:25 AM
Specifications
Model
TV RF system
Colour system
Channel and Frequencies
Power input
Power consumption
Screen size
(Measured diagonally)
Audio output
(Rated power output)
Speakers
External input/output
Dimension (W x H x D)
Weight
Accessories
AV-29V334
AV-29V314
AV-25V334
AV-25V314
AV-21V334
B/G, I, D/K, M
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
VHF low channel (VL) : 46.25 to 168.25 MHz
VHF high channel (VH) : 175.25 to 463.25 MHz
UHF channel (U) : 471.25 to 863.25 MHz
*Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
MAX: 215 W
MAX: 166 W
MAX: 173 W
MAX: 151 W
MAX: 143 W
AVG: 130 W
AVG: 109 W
AVG: 110 W
AVG: 102 W
AVG: 91 W
Picture tube: 727.4 mm Picture tube: 727.4 mm Picture tube: 649.0 mm Picture tube: 649.0 mm Picture tube: 546.9 mm
Visible area: 676.0 mm Visible area: 676.0 mm Visible area: 597.0 mm Visible area: 597.0 mm Visible area: 508.0 mm
7 W + 7 W + 13 W
10 W + 10 W
7 W + 7 W + 13 W
7W+7W
7 W + 7 W + 13 W
(6.5 x 13) cm X 2 + (6.5 x 13) cm X 2 (6.5 x 13) cm X 2 + (6.5 x 13) cm X 2 (6.5 x 13) cm X 2 +
(Ø 13) cm X 1
(Ø 13) cm X 2
(Ø 13) cm X 1
VIDEO-1: S-VIDEO input, VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input
VIDEO-3: VIDEO input, AUDIO L/R input
OUTPUT: VIDEO output, AUDIO L/R output
Headphone jack: Stereo mini jack (3.5 mm diameter)
812 X 584.2 X 520.5 mm 812 X 584.2 X 520.5 mm 728 X 549 X 481.5 mm 728 X 536 X 481.5 mm 649 X 478 X 473.5 mm
41 kg
41 kg
35 kg
33 kg
26.5 kg
• Remote control unit: RM-C1281 X 1
• AA/R6/UM-3 dry cell battery X 2
• Matching aerial adapter X 1
Design and specifications subject to change without notice.
23
GGT0051-001A-H(21-24)
23
6/17/04, 11:25 AM
Specifications (continued)
Model
TV RF system
Colour system
Channel and Frequencies
Power input
Power consumption
Screen size
(Measured diagonally)
Audio output
(Rated power output)
Speakers
AV-21V314
AV-21C314
AV-21W314
AV-21D314
AV-21Y314
B/G, I, D/K, M
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
VHF low channel (VL) : 46.25 to 168.25 MHz
VHF high channel (VH) : 175.25 to 463.25 MHz
UHF channel (U) : 471.25 to 863.25 MHz
*Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
MAX: 121 W
MAX: 88 W
MAX: 121 W
MAX: 91 W
MAX: 91 W
AVG: 81 W
AVG: 65 W
AVG: 81 W
AVG: 65 W
AVG: 65 W
Picture tube: 546.9 mm Picture tube: 547.5 mm Picture tube: 546.9 mm Picture tube: 548.1 mm Picture tube: 548.1 mm
Visible area: 508.0 mm Visible area: 505.0 mm Visible area: 508.0 mm Visible area: 508.0 mm Visible area: 508.0 mm
7W+7W
3W+3W
7W+7W
(6.5 x 13) cm X 2
(5 x 9) cm X 2
(6.5 x 13) cm X 2
3W+3W
(5 x 12) cm X 2
(6 x 12) cm X 2
External input/output
VIDEO-1: S-VIDEO input*, VIDEO input, AUDIO L/R input (*Except AV-21D314/AV-21Y314/AV-21C314)
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO** (Y/CB/CR) input
VIDEO-3**: VIDEO input, AUDIO L/R input (**Except AV-21Y314/AV-21C314)
OUTPUT: VIDEO output, AUDIO L/R output
Headphone jack: Stereo mini jack (3.5 mm diameter)
Dimension (W x H x D)
649 X 465.5 X 473.5 mm 502 X 476.5 X 471.6 mm 649 X 465.5 X 471.5 mm 598 X 468 X 478 mm 649 X 470.5 X 477.5 mm
Weight
24 kg
22 kg
24 kg
25 kg
20 kg
Accessories
• Remote control unit: RM-C1281 X 1
• AA/R6/UM-3 dry cell battery X 2
• Matching aerial adapter X 1
• Rod aerial X 1
Design and specifications subject to change without notice.
VICTOR COMPANY OF JAPAN, LIMITED
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
GGT0051-001A-H(21-24)
24
0604-FLE-JMT
6/17/04, 11:25 AM
Download PDF

advertising