Epson 61P/81P Projector User Manual

BL01628-201
DIGITAL CAMERA
EN
Before You Begin
FINEPIX JX500 Series
First Steps
Owner’s Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM digital camera and
the supplied software. Be sure
that you have read and understood its contents and the
warnings in “For Your Safety”
(P ii) before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety and operating instructions should be read before the
appliance is operated.
• Retain Instructions: The safety and operating
instructions should be retained for future
reference.
• Heed Warnings: All warnings on the appliance and in the operating instructions
should be adhered to.
• Follow Instructions: All operating and use
instructions should be followed.
Installation
Power Sources: This video product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your appliance dealer or local
power company. For video products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization: This video product
is equipped with a polarized alternatingcurrent line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
ii
Alternate Warnings: This video product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of
fire or electric shock.
Power-Cord Protection: Power-supply cords
should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
Accessories: Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
Ventilation: Slots and openings in the cabinet
are provided for ventilation, to ensure reliable
operation of the video product and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never be blocked by placing the
video product on a bed, sofa, rug, or other An appliance and cart
combination should
similar surface.
be moved with care.
This video product should not be placed in a
Quick stops, excesbuilt-in installation such as a bookcase or rack
sive force, and uneven
unless proper ventilation is provided or the
surfaces may cause
manufacturer’s instructions have been adthe appliance and cart
hered to. This video product should never be
combination to overturn.
placed near or over a radiator or heat register.
Attachments: Do not use attachments not
recommended by the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video
product near water—for example, near a
bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, and the like.
For Your Safety
Antennas
Outdoor Antenna Grounding: If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and builtup static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Ground Clamp
Antenna Lead
in Wire
mally follow the operating instructions. Adjust only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the video
Object and Liquid Entry: Never push objects
product to its normal operation.
of any kind into this video product through
openings as they may touch dangerous volt- When the video product exhibits a distinct
age points or short out parts that could result change in performance—this indicates a
in a fire or electric shock. Never spill liquid of need for service.
any kind on the video product.
Replacement Parts: When replacement parts
Use
Cleaning: Unplug this video product from the
wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the
video product due to lightning and powerline surges.
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or
other hazards.
Safety Check: Upon completion of any service
or repairs to this video product, ask the service technician to perform safety checks to
Service
Antenna
Electric Service
Servicing: Do not attempt to service this video determine that the video product is in proper
Discharge Unit
Equipment
product yourself as opening or removing cov- operating condition.
(NEC SECTION
ers may expose you to dangerous voltage or
810-20)
other hazards. Refer all servicing to qualified
Ground Clamps
Grounding service personnel.
Conductors Damage Requiring Service: Unplug this video
Power Service Grounding
(NEC SECTION product from the wall outlet and refer servicElectrode System (NEC ART
810-21) ing to qualified service personnel under the
250. PART H)
following conditions:
Power Lines: An outside antenna system • When the power-supply cord or plug is
should not be located in the vicinity of overdamaged.
head power lines or other electric light or • If liquid has been spilled, or objects have
power circuits, or where it can fall into such
fallen into the video product.
power lines or circuits. When installing an • If the video product has been exposed to
outside antenna system, extreme care should
rain or water.
be taken to keep from touching such power • If the video product has been dropped or
lines or circuits as contact with them might
the cabinet has been damaged.
be fatal.
If the video product does not operate nor-
iii
For Your Safety
Be sure to read these notes before use
WARNING
Safety Notes
• Make sure that you use your camera correctly. Read these safety
notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
WARNING
CAUTION
This icon indicates that death or serious injury can result if the
information is ignored.
This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
WARNING
Unplug from
power socket
Avoid exposure
to water
iv
If a problem arises, turn the camera off, remove the battery, and
disconnect and unplug the AC power adapter. Continued use of
the camera when it is emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can cause a fire or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera. If water
or foreign objects get inside the camera, turn the camera off,
remove the battery, and disconnect and unplug the AC power
adapter. Continued use of the camera can cause a fire or electric shock. Contact your FUJIFILM dealer.
Do not use in
the bathroom or
shower
Do not
disassemble
Do not touch
internal parts
Do not use the camera in the bathroom or shower. This can cause
a fire or electric shock.
Never attempt to change or take apart the camera (never open
the case). Failure to observe this precaution can cause fire or
electric shock.
Should the case break open as the result of a fall or other accident,
do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the
damaged parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and take the product to the
point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and
do not place heavy objects on the connection cord. These actions
could damage the cord and cause a fire or electric shock. If the
cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the
camera while you are walking or driving a vehicle. This can
result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from
the lightning discharge.
Do not use the battery except as specified. Load the battery as
shown by the indicator.
Do not heat, change or take apart the battery. Do not drop or subject
the battery to impacts. Do not store the battery with metallic products. Any of these actions can cause the battery to burst or leak
and cause fire or injury as a result.
Use only the battery or AC power adapters specified for use with this
camera. Do not use voltages other than the power supply voltage
shown. The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or
clothing, flush the affected area with clean water and seek medical
attention or call an emergency number right away.
For Your Safety
WARNING
CAUTION
Do not use the charger to charge batteries other than those specified here. The supplied battery charger is for use only with the
type of battery supplied with the camera. Using the charger to
charge conventional batteries or other types of rechargeable
batteries can cause the battery to leak fluid, overheat or burst.
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
fire or electric shock.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
Do not use in the presence of flammable objects, explosive gases,
or dust.
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small children. If a child swallows a memory card, seek medical attention or call an emergency number.
CAUTION
Unplug from
power socket
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fire.
Using a flash too close to a person’s eyes may temporarily affect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your finger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric
shock. Contact your FUJIFILM dealer to request internal cleaning every two years. Please note that this service is not free
of charge.
Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock.
Remove your fingers from the flash window before the flash fires.
Failure to observe this precaution could result in burns.
Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fire.
Keep the flash window clean and do not use the flash if the window
is obstructed. Failure to observe these precautions could cause
smoke or discoloration.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fire or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fire or electric
shock.
v
For Your Safety
■ Charging the Battery
Charge the battery in the supplied battery
charger. Charging times will increase at ambient temperatures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt to
The following describes the proper use of charge the battery at temperatures above
batteries and how to prolong their life. Incor- 40 °C (+104 °F); at temperatures below 0 °C
rect use can shorten battery life or cause leak- (+32 °F), the battery will not charge.
age, overheating, fire, or explosion.
Do not attempt to recharge a fully charged
Li-ion Batteries
battery. The battery does not however need
Read this section if your camera uses a to be fully discharged before charging.
rechargeable Li-ion battery.
The battery may be warm to the touch immeThe battery is not charged at shipment. diately after charging or use. This is normal.
Charge the battery before use. Keep the bat■ Battery Life
tery in its case when not in use.
At normal temperatures, the battery can be
■ Notes on the Battery
recharged about 300 times. A noticeable deThe battery gradually loses its charge when crease in the length of time the battery will
not in use. Charge the battery one or two hold a charge indicates that it has reached
days before use.
the end of its service life and should be reBattery life can be extended by turning the placed.
The Battery and Power Supply
Note: Check the type of battery used in
your camera and read the appropriate
sections.
camera off when not in use.
Battery capacity decreases at low temperatures; a depleted battery may not function at
when cold. Keep a fully charged spare battery in a warm place and exchange as necessary, or keep the battery in your pocket or
other warm place and insert it in the camera
only when shooting. Do not place the battery in direct contact with hand warmers or
other heating devices.
vi
■ Storage
Performance may be impaired if the battery is
left unused for extended periods when fully
charged. Run the battery flat before storing it.
If the camera will not be used for an extended
period, remove the battery and store it in a
dry place with an ambient temperature of
from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of
temperature.
■ Cautions: Handling the Battery
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not expose to flame or heat.
• Do not disassemble or modify.
• Use with designated chargers only.
• Do not drop or subject to strong physical
shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become
warm to the touch after extended use. This
is normal.
AA Alkaline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA
alkaline or rechargeable AA Ni-MH batteries. Information on compatible battery
types may be found elsewhere in the camera
manual.
■ Cautions: Handling the Batteries
• Do not expose to water, flame, or heat, or
store in warm or humid conditions.
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not disassemble or modify the batteries
or battery casing.
• Do not subject to strong physical shocks.
• Do not use batteries that are leaking, deformed, or discolored.
• Keep out of reach of infants and small children.
• Insert in the correct orientation.
For Your Safety
• Do not mix old and new batteries, batteries
with different charge levels, or batteries of
different types.
• If the camera will not be used for an extended period, remove the batteries. Note that
the camera clock will be reset.
• The batteries may be warm to the touch
immediately after use. Turn the camera
off and allow the batteries to cool before
handling.
• Battery capacity tends to decrease at low
temperatures. Keep spare batteries in a
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
• Fingerprints and other stains on the battery
terminals can impair battery performance.
Thoroughly clean the terminals with a
soft, dry cloth before inserting them in the
camera.
If the batteries leak, clean the battery
compartment thoroughly before inserting new batteries.
If fluid from the battery comes into
contact with skin or clothing, flush
the affected area with water. If fluid
enters your eyes, immediately flush the
affected area with water and seek
medical attention. Do not rub your eyes.
Failure to observe this precaution could
result in permanent visual impairment.
■ Ni-MH Batteries
The capacity of Ni-MH batteries may be
temporarily reduced when new, after long
periods of disuse, or if they are repeatedly
recharged before being fully discharged. This
is normal and does not indicate a malfunction. Capacity can be increased by repeatedly
discharging the batteries using the discharge
option in the camera setup menu and recharging them using a battery charger (sold
separately).
Q CAUTION: Do not use the discharge option
with alkaline batteries.
The camera draws a small amount of current
even when off. Ni-MH batteries that have
been left in the camera for an extended period may be drawn down to the point that
they no longer hold a charge. Battery performance may also drop if the batteries are run
down in a device such as a flashlight. Use the
discharge option in the camera setup menu
to discharge Ni-MH batteries. Batteries that
no longer hold a charge even after repeatedly being discharged and recharged have
reached the end of their service life and must
be replaced.
AC Power Adapters (Available Separately)
This section applies to all camera models.
Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
• If the adapter causes radio interference,
reorient or relocate the receiving antenna.
Ni-MH batteries can be recharged in a battery charger (sold separately). Batteries may
become warm to the touch after charging.
Refer to the instructions provided with the
charger for more information. Use the charger with compatible batteries only.
Ni-MH batteries gradually lose their charge
when not in use.
■ Disposal
Dispose of used batteries in accord with local
regulations.
vii
For Your Safety
Using the Camera
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
Take Test Shots
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to ensure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profits incurred as a result
of product malfunction.
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system
cannot be used in ways that infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, entertainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Handling
To ensure that images are recorded correctly,
do not subject the camera to impact or physical shocks while images are being recorded.
viii
Liquid Crystal
In the event that the LCD monitor is damaged,
care should be taken to avoid contact with liquid crystal. Take the urgent action indicated
should any of the following situations arise:
• If liquid crystal comes in contact with your
skin, clean the area with a cloth and then
wash thoroughly with soap and running
water.
• If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
Electrical Interference
This camera may interfere with hospital or
aviation equipment. Consult with hospital
or airline staff before using the camera in a
hospital or on an aircraft.
Color Television Systems
NTSC (National Television System Committee)
is a color television telecasting specification
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera file
format in which information stored with phoAlthough the display is manufactured using tographs is used for optimal color reproducextremely high-precision technology, it may tion during printing.
contain pixels that are always lit or that do not
IMPORTANT NOTICE:
light. This is not a malfunction, and images reRead Before Using the Software
corded with the product are unaffected.
Direct or indirect export, in whole or in part,
of licensed software without the permission
Trademark Information
xD-Picture Card and E are trademarks of of the applicable governing bodies is proFUJIFILM Corporation. The typefaces included hibited.
herein are solely developed by DynaComware
Taiwan Inc. Macintosh, QuickTime, and Mac
OS are trademarks of Apple Inc. in the U.S.A.
and other countries. Windows 7, Windows
Vista, and the Windows logo are trademarks
of the Microsoft group of companies. Adobe
and Adobe Reader are either trademarks
or registered trademarks of Adobe Systems
Incorporated in the U.S.A. and/or other
countries. The SDHC and SDXC logos are
trademarks of SD-3C, LLC. The HDMI logo is a
trademark. YouTube is a trademark of Google
Inc. All other trade names mentioned in
this manual are the trademarks or registered
trademarks of their respective owners.
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information on specific topics, consult the sources below.
Table of Contents .............................P
.............................P xi
The “Table of Contents” gives an
overview of the entire manual. The
principal camera operations are listed here.
Troubleshooting ............................ P 86
Having a specific problem with the
camera? Find the answer here.
Warning Messages and Displays ..... P 91
Find out what’s behind that flashing
icon or error message in the display.
Memory Cards
Pictures can be stored in an optional SD, SDHC, and SDXC memory cards (P 9), referred to in this manual as “memory cards”.
ix
Frequently-Used Buttons
■ Turning the Camera on in Playback Mode
y When the camera is
off, playback can be
started by pressing the
a button for about a
second.
■ Silent Mode
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
x
■ Taking Pictures During Playback
y To return instantly to shooting mode,
press the shutter button halfway.
Shoot
View
■ Deleting Pictures
y Press the selector up (b)
to display deletion options.
Table of Contents
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS ..................................ii
Safety Notes ..................................................................iv
About This Manual ...........................................................ix
Frequently-Used Buttons .................................................x
Before You Begin
Symbols and Conventions.................................................1
Supplied Accessories .........................................................1
Parts of the Camera ..........................................................2
Camera Displays ...............................................................4
Shooting ........................................................................4
Playback.........................................................................5
First Steps
Inserting the Battery and a Memory Card.......................6
Compatible Memory Cards ...............................................9
Charging the Battery ......................................................11
Turning the Camera on and Off ......................................13
Shooting Mode ..............................................................13
Playback Mode ...............................................................13
Basic Setup ......................................................................15
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode ......16
Viewing Pictures .............................................................19
More on Photography
Shooting Mode ................................................................20
Choosing a Shooting Mode ............................................20
Shooting Mode Options .................................................21
r PANORAMA...........................................................23
Focus Lock ........................................................................26
d Exposure Compensation ..........................................28
F Macro Mode (Close-ups) ...........................................29
N Using the Flash (Intelligent Flash) ............................30
h Using the Self-Timer .................................................32
b Intelligent Face Detection .......................................33
n Face Recognition ......................................................34
Adding New Faces ..........................................................34
Viewing, Editing, and Deleting Existing Data .................36
Adding Faces Automatically ...........................................36
More on Playback
Playback Options.............................................................38
I Favorites: Rating Pictures .........................................38
Playback Zoom ...............................................................39
Multi-Frame Playback ....................................................40
A Deleting Pictures......................................................41
b Image Search............................................................42
k PhotoBook Assist .....................................................43
Creating a PhotoBook.....................................................43
Viewing Photobooks ......................................................44
Editing and Deleting Photobooks ...................................44
Viewing Panoramas ........................................................45
xi
Table of Contents
Movies
Menus
Recording Movies ............................................................46
Viewing Movies ...............................................................48
Using the Menus: Shooting Mode ..................................61
Using the Shooting Menu...............................................61
Shooting Menu Options .................................................61
A SHOOTING MODE....................................................61
N ISO........................................................................61
O IMAGE SIZE ............................................................62
T IMAGE QUALITY .....................................................63
P FINEPIX COLOR .......................................................63
D WHITE BALANCE ....................................................64
R CONTINUOUS .........................................................64
b FACE DETECTION ....................................................65
F AF MODE ...............................................................65
n FACE RECOGNITION .................................................65
P PANORAMA MODE .................................................65
F MOVIE AF MODE ....................................................66
W MOVIE MODE .........................................................66
Connections
Viewing Pictures on TV ...................................................49
Printing Pictures via USB ................................................50
Printing the DPOF Print Order.........................................52
Viewing Pictures on a Computer ....................................54
Windows: Installing MyFinePix Studio ...........................54
Macintosh: Installing FinePixViewer...............................56
Connecting the Camera ..................................................58
xii
Table of Contents
Using the Menus: Playback Mode ..................................67
Using the Playback Menu ...............................................67
Playback Menu Options..................................................67
k PHOTOBOOK ASSIST ................................................67
b IMAGE SEARCH ......................................................67
A ERASE ...................................................................67
i MOVIE EDIT ...........................................................68
j MARK FOR UPLOAD TO ............................................69
I SLIDE SHOW ..........................................................70
D PROTECT ................................................................71
G CROP.....................................................................71
O RESIZE ...................................................................72
C IMAGE ROTATE .......................................................72
i ERASE FACE RECOG. ................................................73
K PRINT ORDER (DPOF) ..............................................73
The Setup Menu ..............................................................74
Using the Setup Menu....................................................74
Setup Menu Options ......................................................75
F DATE/TIME ............................................................75
N TIME DIFFERENCE ...................................................75
L a ......................................................75
o SILENT MODE.........................................................75
R RESET....................................................................76
K FORMAT ................................................................76
A IMAGE DISP. ...........................................................76
B FRAME NO. ............................................................77
G OPERATION VOL. ....................................................77
H SHUTTER VOLUME ..................................................77
e SHUTTER SOUND ....................................................78
I PLAYBACK VOLUME ................................................78
J LCD BRIGHTNESS ....................................................78
E LCD MODE .............................................................78
M AUTO POWER OFF...................................................78
L DIGITAL IS ..............................................................78
m BLINK DETECTION ...................................................79
D DIGITAL ZOOM .......................................................80
p MOVIE ZOOM TYPE .................................................80
O BACKGROUND COLOR ..............................................81
c GUIDANCE DISPLAY ................................................81
Q VIDEO SYSTEM .......................................................81
S DATE STAMP ..........................................................81
xiii
Table of Contents
Technical Notes
Troubleshooting
Optional Accessories .......................................................82
Printing ........................................................................82
Computer Related..........................................................82
Audio/Visual .................................................................82
Accessories from FUJIFILM..............................................83
Caring for the Camera .....................................................84
Storage and Use .............................................................84
Water and Sand.............................................................84
Condensation ................................................................84
Cleaning .........................................................................85
Traveling ........................................................................85
Problems and Solutions ..................................................86
Warning Messages and Displays ....................................91
xiv
Appendix
Tips and Tricks..................................................................95
Memory Card Capacity ....................................................98
FinePix JX550 - JX590 ....................................................98
FinePix JX500 - JX540 ....................................................99
Specifications ................................................................100
Before You Begin
Symbols and Conventions
The following symbols are used in this manual:
Q : This information should be read before use to ensure correct operation.
R : Additional information that may be helpful when using the camera.
P: Other pages in this manual on which related information may be found.
Menus and other text in the LCD monitor are shown in bold. In the illustrations in this manual, displays may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
NP-45A or NP-45B
rechargeable battery
• Strap
• User Guide/
Basic Manual
AC power adapter *
USB cable
CD-ROM (contains
this manual)
Attaching the Strap
Attach the strap as
shown.
* Shape of adapter varies with region of sale.
1
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor up
d (exposure compensation) button (P 28)
b (delete) button (P x)
Move cursor left
F (macro) button (P 29)
MENU/OK button
Move cursor right
N (flash) button (P 30)
Move cursor down
h (self-timer) button (P 32)
* Illustrations in this manual may be simplified for explanatory purposes.
2
Before You Begin
Parts of the Camera
1 Self-timer lamp ............................................................ 32
2 Flash ............................................................................. 30
3 Shutter button .............................................................. 18
4 Lens and lens cover
5 Microphone .................................................................. 46
6 LCD monitor .................................................................... 4
7 W (zoom out) button ...............................................17, 39
8 ON/OFF button ............................................................. 13
9 T (zoom in) button...................................................17, 39
10 a (playback) button .................................................. 19
11 Strap eyelet .................................................................... 1
*Press and hold the DISP/BACK button until o is displayed.
Before You Begin
12 t (movie recording) button ........................................ 46
13 DISP (display)/BACK button .....................................5, 15
o (silent mode) button* ............................................... X
14 Battery-chamber cover ................................................... 6
15 USB multi-connector .........................................49, 50, 58
16 Speaker......................................................................... 48
17 Tripod mount
18 Memory card slot ............................................................ 7
19 Battery chamber ............................................................. 6
20 Battery latch ................................................................6, 8
3
Parts of the Camera
Camera Displays
The following types of indicator may be displayed during shooting and playback. Indicators vary with camera settings.
■ Shooting
P
9
DATE
800
N
12/31/2050
10 : 00 AM
-1 2 3
250
F4.5
1 Shooting mode ............................................................. 20
2 Intelligent Face Detection indicator .............................. 33
3 Continuous shooting mode ........................................... 64
4 Silent mode indicator ................................................3, 75
5 Date stamp ................................................................... 81
6 Movie mode.................................................................. 47
4
7 Number of available frames .......................................... 98
8 Sensitivity ..................................................................... 61
9 Image size/Image quality ........................................62, 63
10 Focus warning .........................................................18, 91
11 FINEPIX color ................................................................ 63
12 White balance............................................................... 64
13 Battery level ................................................................... 5
14 Exposure compensation ................................................ 28
15 Shutter speed/Aperture
16 Date and time ............................................................... 15
17 Blur warning............................................................31, 91
18 Focus frame .................................................................. 26
19 Self-timer indicator ...................................................... 32
20 Macro (close-up) mode................................................. 29
21 Flash mode ................................................................... 30
Before You Begin
Parts of the Camera
■ Playback
100-0001
400
4:3N
4:3
N
YouTube
12 / 31 / 2050 10 : 00 AM
-1 2 3
1 / 250
F4.5
1 Playback mode indicator..........................................19, 38
2 Intelligent Face Detection indicator .........................33, 65
3 Silent mode indicator ................................................3, 75
4 Gift image..................................................................... 38
5 Frame number .............................................................. 77
6 Mark for upload to ........................................................ 69
7 Photobook assist........................................................... 43
8 Favorites ....................................................................... 38
9 DPOF print indicator ..................................................... 52
10 Protected image ........................................................... 71
Battery Level
Battery level is shown as follows:
Indicator
D (white)
C (white)
B (red)
A (blinks red)
Description
Battery partially discharged.
Battery more than half discharged.
Low battery. Charge as soon as possible.
Battery exhausted. Turn camera off and charge battery.
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
• Shooting: Indicators displayed/indicators hidden/best framing
• Playback: Indicators displayed/indicators hidden/I favorites
Before You Begin
5
First Steps
Inserting the Battery and a Memory Card
Insert the battery and memory card as described below.
1 Open the battery-chamber cover.
R Be sure the camera is off before opening the
battery-chamber cover.
Q Do not open the battery-chamber cover
when the camera is on. Failure to observe
this precaution could result in damage to
image files or memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
2 Insert the battery.
Align the orange stripe on the battery with
the orange battery latch and slide the battery into the camera, keeping the battery
latch pressed to one side. When inserting
the battery, be sure that the battery is secured by the orange battery latch. If the battery is not securely latched, the camera may
not turn on or may turn off without warning.
Orange stripe
Battery latch
The camera uses an NP-45A/NP-45B rechargeable battery.
Q Insert the battery in the correct orientation. Do NOT use force or attempt to insert
the battery upside down or backwards. The battery will slide in easily in the correct orientation.
6
Inserting the Battery and a Memory Card
3 Insert the memory card.
Holding the memory card in the
orientation shown at right, slide it in
until it clicks into place at the back
of the slot.
Q Be sure card is in the correct orientation; do not insert at an angle or use
force.
Click
Battery
Q SD/SDHC/SDXC memory cards can be locked, making
it impossible to format the card or to record or delete
images. Before inserting an SD/SDHC/SDXC memory
card, slide the write-protect switch to the unlocked
Write-protect switch
position.
4 Close the battery-chamber cover.
First Steps
7
Inserting the Battery and a Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera off and open the
battery-chamber cover.
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly. Use
your finger to hold it and gently release the card.
8
First Steps
Inserting the Battery and a Memory Card
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. A complete list of approved memory cards
is available at http://www.fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q Memory Cards
• Do not turn the camera off or remove the memory card while the memory card is being formatted
or data are being recorded to or deleted from the card. Failure to observe this precaution
could damage the card.
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all
memory cards after using them in a computer or other device. For more information
on formatting memory cards, see “K FORMAT” (P 76).
• Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions of
an SD/SDHC/SDXC memory card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory
card. Use a G card or better when shooting HD.
• Formatting a memory card in the camera creates a folder in which pictures are
stored. Do not rename or delete this folder or use a computer or other device to
edit, delete, or rename image files. Always use the camera to delete pictures; before
editing or renaming files, copy them to a computer and edit or rename the copies,
not the originals.
First Steps
9
Inserting the Battery and a Memory Card
Q Batteries
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not affix stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in “The Battery and Power Supply” (P vi).
• Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.
10
First Steps
Charging the Battery
The battery is not charged at shipment. Charge the battery before use. The
camera charges the battery internally.
1 Charge the battery.
Turn the camera off and connect the camera to the supplied AC power adapter using the supplied USB cable. Then plug the
AC power adapter into an indoor power
outlet.
Q Be sure the connectors are in the correct orientation and then insert them fully.
R The camera operates in external power mode if the camera is turned on while
plugged into AC power.
The Charging Indicator
The charging indicator is displayed in the center of the LCD monitor.
Charging indicator
a
Battery status
Battery charging.
s
Battery fault.
Action
—
Unplug the AC power adapter from the power
outlet and reinsert the battery in the correct
orientation (P
(P 86).
The charging indicator will disappear when charging completes.
First Steps
11
Charging the Battery
Charging via a computer
The battery can be charged by connecting the camera to a computer.
Turn the camera off and connect the supplied USB cable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not
use a USB hub or keyboard.
Q If the camera is turned on, charging is not available.
Q If the computer goes into sleep mode while charging, charging will stop. To
continue charging, disable sleep mode on the computer, and disconnect and
connect the USB cable.
Q Charging may be impossible depending on computer specifications, settings
or conditions.
12
First Steps
Turning the Camera on and Off
Shooting Mode
Press the ON/OFF button to turn the
camera on. The lens will extend and
the lens cover will open.
Playback Mode
To turn the camera on and begin
playback, press the a button for
about a second.
Press ON/OFF again to turn the camera
off.
Press the a button again or press
the ON/OFF button to turn the camera
off.
R Switching to Playback Mode
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
First Steps
R Switching to Shooting Mode
To exit to shooting mode, press the shutter button halfway. Press the a button
to return to playback.
13
Turning the Camera on and Off
Q Forcibly obstructing the lens could cause damage or product malfunction.
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.
Q The ON/OFF button does not completely end the supply of power to the camera.
R Auto Power Off
The camera will turn off automatically if no operations are performed for the length of
time selected for M AUTO POWER OFF (P 78).
14
First Steps
Basic Setup
A language-selection dialog is displayed the first time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the F DATE/TIME or L a options in
the setup menu; for information on displaying the setup menu, see page 74).
1 Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip
will be displayed the next time the camera is turned on.
START MENU
ENGLISH
FRANCAIS
DEUTSCH
SET
2 The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
NO
DATE/TIME NOT SET
2014
2013
YY. MM. DD
2012
2011
2010
SET
1. 1 12 : 00
AM
NO
R The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
First Steps
15
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode
This section describes how to take pictures in Q (scene recognition) mode.
The camera automatically analyzes the composition and adjusts settings appropriately.
1 Turn the camera on.
Press the ON/OFF button to turn the camera
on. Q shooting indicators will be displayed.
The g Icon
This icon indicates that the camera continuously searches for faces to select the
appropriate scene, increasing the drain on the battery.
Scene Icon
The camera selects the scene according to shooting conditions and the type of
subject: b PORTRAIT (portraits), c LANDSCAPE (landscapes), d NIGHT (poorly-lit landscapes), e MACRO (close ups), f NIGHT PORTRAIT (poorly-lit portraits), g BACKLIT PORTRAIT
(backlit portraits), a AUTO (all other scenes)
16
Taking Pictures in Q (Scene Recognition) Mode
2 Frame the picture.
Use the zoom buttons to frame the picture in the display.
Zoom out
Zoom in
Zoom indicator
Holding the Camera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from
the lens and flash.
Basic Photography and Playback
17
Taking Pictures in Q (Scene Recognition) Mode
3 Focus.
Press the shutter button halfway to focus.
R The lens may make a noise when the camera focuses; this
is normal.
Double
beep
If the camera is able to focus, it will beep twice.
If the camera is unable to focus, the focus frame will turn red, s will be displayed. Change the composition or use focus lock (P 26).
4 Shoot.
Smoothly press the shutter button the rest of the way
down to take the picture.
Click
R If the subject is poorly lit, the flash may fire when the picture is taken. For information on using the flash when
lighting is poor, see “N Using the Flash (Intelligent Flash)”
(P 30).
The Shutter Button
The shutter button has two positions. Pressing the shutter button halfway sets
focus and exposure; to shoot, press the shutter button the rest of the way down.
18
Basic Photography and Playback
Viewing Pictures
Pictures can be viewed in the LCD monitor. When taking important photographs, take a test shot and check the results.
1 Press the a button.
The most recent picture will be displayed.
2 View additional pictures.
Press the selector right to view pictures in
the order recorded, left to view pictures in
reverse order.
Press the shutter button to exit to shooting
mode.
Basic Photography and Playback
19
More on Photography
Shooting Mode
Choose a shooting mode according to the scene or type of subject.
Choosing a Shooting Mode
1 Press MENU/OK to display the shooting menu.
2 Highlight A SHOOTING MODE and press the
SHOOTING MENU
SHOOTING MODE
selector right to display shooting mode options.
SET
EXIT
3 Highlight the desired mode and press MENU/OK.
QSCENE RECOGNITION
Selects optimum
camera settings
for certain modes.
SET
CANCEL
4 Press DISP/BACK to exit to shooting mode.
20
Shooting Mode
Shooting Mode Options
Scene
Description
The camera automatically analyzes the composition and selects a scene
Q SCENE RECOGNITION
according to shooting conditions and the type of subject.
Choose for crisp, clear snapshots. This mode is recommended in most
B AUTO
situations.
Options for white balance and AF mode will be fully available and expoP PROGRAM AE
sure compensation can be adjusted manually.
The camera takes two shots: one without the flash and one with.
C NATURAL & N
Capture natural lighting under low-light conditions.
D NATURAL LIGHT
Choose for portraits.
L PORTRAIT
Choose for natural skin tones when taking portraits of infants.
D BABY MODE
The shutter is released automatically when Intelligent Face Detection
K SMILE&SHOOT
detects a smiling face.
Choose for daylight shots of buildings and landscapes.
M LANDSCAPE
Take up to three pictures and join them together to form a panorama.
r PANORAMA
Choose when photographing moving subjects.
N SPORT
Choose this mode for poorly lit twilight or night scenes.
O NIGHT
Choose this mode for slow shutter speeds when shooting at night.
H NIGHT (TRIPOD)
Slow shutter speeds are used to capture the expanding burst of light
P FIREWORKS
from a firework.
Choose this mode to record the vivid colors in sunrises and sunsets.
Q SUNSET
More on Photography
21
Shooting Mode
Scene
R SNOW
S BEACH
U PARTY
V FLOWER
W TEXT
22
Description
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
Capture indoor background lighting under low-light conditions.
Choose for vivid close-ups of flowers.
Take clear pictures of text or drawings in print.
More on Photography
Shooting Mode
■ r PANORAMA
In this mode, you can take up to three pictures and join them together to form
a panorama. Use of a tripod is recommended to assist in composing overlapping shots. The camera zooms all the way out and zoom remains fixed at the
widest angle until shooting is complete.
1 Select C AUTO for P PANORAMA MODE in the shooting menu (P 61).
2 Press the selector up to select a frame. Press the selector left or right to
highlight a pan direction and press MENU/OK.
3 Take a photograph. Exposure and white balance for the panorama are set
with the first shot.
4 Frame the next shot to overlap with the previous picture by superimposing y on + so that they form a solid circle (z). The camera will release the
shutter automatically.
Pan direction
1
END
2 3
CANCEL
Display after 1st shot
More on Photography
1
END
2 3
CANCEL
Shutter released
23
Shooting Mode
5 Take the last shot as described in Step 4.
R To end shooting and create a panorama after the first or second shot, press the
multi selector up after completing Step 3 or Step 4 and proceed to Step 6.
6 Press MENU/OK to save the picture.
R Saving a panorama may take a while.
Q Panoramas are created from multiple frames. The camera may in some cases be
unable to stitch the frames together perfectly.
Q The desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
For Best Results
For best results, be careful not to tilt the camera backward or forward or to either
side and try not to move the camera while y and + are aligned to form a solid circle.
Printing Panoramas
Depending on the page size and the size of the panorama, panoramas may print
with their edges cropped out or with wide margins at the top and bottom or at
both sides.
24
More on Photography
Shooting Mode
Framing Panoramas Manually
Follow the steps below if the desired results are not achieved with C AUTO selected for P PANORAMA MODE:
1 Select D MANUAL for P PANORAMA MODE in the shooting menu.
2 Select a frame and take the first shot.
3 Press MENU/OK to display a guide showing an edge of the picture you have just taken. Take
the next shot, framing it to overlap with the previous picture.
Guide
Display after 1st shot
Frame next shot
4 Repeat Step 3 to take the third shot and then press MENU/OK to display the completed panorama.
5 Press MENU/OK to save the picture.
More on Photography
25
Focus Lock
To compose photographs with off-center subjects:
1 Focus: Position the subject in the focus frame (U)
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
2 Recompose: Keep the button pressed halfway.
3 Shoot: Press the button all the way down.
26
More on Photography
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Subjects that show little contrast with the background
• Fast-moving subjects.
(for example, subjects in clothing that is the same color
• Subjects photographed through a window or other re- as the background).
flective object.
• Subjects positioned in front of or behind a high-contrast
• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a
light, such as hair or fur.
subject photographed against a backdrop of highly con• Insubstantial subjects, such as smoke or flame.
trasting elements).
More on Photography
27
d Exposure Compensation
To adjust exposure compensation when photographing very bright, very dark, or high-contrast
subjects, press the selector up (d). Press the selector up or down to choose an exposure compensation value and then press MENU/OK.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
R A d icon and exposure indicator are displayed at settings other than ±0. Exposure
compensation is not reset when the camera is turned off; to restore normal exposure control, choose a value of ±0.
R Turn the flash off when using exposure compensation.
R Exposure compensation is available only when P (PROGRAM AE) is selected for
shooting mode.
28
More on Photography
F Macro Mode (Close-ups)
For close-ups, press the selector left (F) and select
F. When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use
the zoom buttons to compose pictures (P 17).
To exit macro mode, press the selector left (F) and select
H.
OFF
OFF
R Use of a tripod is recommended to prevent blur caused by camera shake.
More on Photography
29
N Using the Flash (Intelligent Flash)
When the flash is used, the camera’s Intelligent Flash system instantly analyzes
the scene based on such factors as the brightness of the subject, its position
in the frame, and its distance from the camera. Flash output and sensitivity
are adjusted to ensure that the main subject is correctly exposed while preserving the effects of ambient background lighting, even in dimly-lit indoor
scenes. Use the flash when lighting is poor, for example when shooting at
night or indoors under low light.
Press the selector right (N) and choose from the following flash modes:
P
AUTO FLASH
According to
shooting conditions
Option
AUTO/K
AUTO/
(AUTO FLASH)
FLASH)
N/L
(FORCED FLASH)
FLASH)
Description
The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
P
The flash does not fire even when the subject is poorly lit. Use of a tripod is
(SUPPRESSED FLASH
FLASH)) recommended.
O/M
Capture both the main subject and the background under low light (note that
(SLOW SYNCHRO)
SYNCHRO) brightly lit scenes may be overexposed).
30
More on Photography
N Using the Flash (Intelligent Flash)
R If the flash will fire, p will be displayed when the shutter button is pressed halfway.
At slow shutter speeds, k will appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
R The flash may fire several times with each shot. Do not move the camera until
shooting is complete.
R The flash may cause vignetting.
K RED EYE REDUCTION / L FORCED FLASH / M RED EYE & SLOW
J icon indicates that Intelligent Face Detection is on and will be used
to minimize “red-eye” caused by the flash reflecting from the retinas of
portrait subjects.
More on Photography
31
h Using the Self-Timer
To use the self-timer, press the selector down (h)
and choose from the following options:
OFF
OFF
Option
T (OFF)
S (10 SEC)
R (2 SEC)
32
Description
Self-timer off.
The shutter is released ten seconds after the shutter button is pressed. Use for
self-portraits. The self-timer lamp on the front of the camera blinks while the
timer counts down.
The shutter is released two seconds after the shutter button is pressed. Use to
reduce blur caused by the camera moving when the shutter-release button is
pressed. The self-timer lamp will blink as the timer counts down.
More on Photography
b Intelligent Face Detection
Intelligent Face Detection sets focus and exposure for human faces anywhere
in the frame, preventing the camera from focusing on the background in
group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK
to display the shooting menu and select ON for
b FACE DETECTION. Faces can be detected with
the camera in vertical or horizontal orientation; if
a face is detected, it will be indicated by a green
border. If there is more than one face in the frame,
the camera will select the face closest to the center;
other faces are indicated by white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than
the portrait subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the
area indicated by the green border when the picture is taken.
More on Photography
33
n Face Recognition
The camera can store information on the face and personal
details (name, relationship, and birth date) of portrait subjects and assign these subjects priority for Intelligent Face
Detection or display their names and other information
during playback.
Happy Birthday!
Adding New Faces
Follow the steps below to add faces to the face recognition database.
1 Select REGISTER.
Select REGISTER for n FACE RECOGNITION in the shooting menu.
R To disable face recognition, select OFF.
2 Take a photograph.
After checking that the subject is facing the camera,
frame the subject using the guides and take the photograph.
R If an error is displayed, take the photograph again.
34
REGISTER FACE
CAPTURE THE FACE
ALONG WITH THE GUIDLINE
CANCEL
More on Photography
n Face Recognition
3 Enter face recognition data
Press MENU/OK to display face recognition data and enter the following information:
• NAME: Enter a name of up to 14 characters and press MENU/OK.
• BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.
• CATEGORY: Choose the option that describes your relationship to the subject and press MENU/OK.
R If you attempt to zoom in on the face of a person indicated by a green border
in the face recognition database on their birthday, the camera will display their
name and the message “Happy Birthday!”
R If D BABY MODE is selected in the shooting mode and Intelligent Face Detection is on, the camera will display the age of a 3 year old or younger child.
More on Photography
35
n Face Recognition
Viewing, Editing, and Deleting Existing Data
Follow the steps below to view, edit, or delete face recognition data.
1 Select VIEW & EDIT for n FACE RECOGNITION.
2 Select a face.
3 View or edit face recognition data.
The name, category, or birth date can be edited as described in Step 3 of
“Adding New Faces” (P 34). To retake the photo, select REPLACING IMAGE
and shoot a new portrait as described above.
R To delete face recognition data for the selected subject, select ERASE.
Adding Faces Automatically
To automatically add frequently-photographed subjects to the face recognition database, select ON for AUTO REGISTRATION in the face recognition
menu. If the camera detects a face that has been photographed many times
without being added to the database, it will display a message prompting you
to create a new face recognition entry. Press MENU/OK and enter face recognition data.
R The camera may sometimes fail to recognize new faces automatically. If necessary,
faces can be added manually using the REGISTER option.
36
More on Photography
n Face Recognition
Face Recognition
The camera can store up to eight faces. If you attempt to add a ninth face, a confirmation dialog will be displayed; use VIEW & EDIT to make room for new faces by
deleting existing data. AUTO REGISTRATION is disabled if there are already data for
eight faces.
When Intelligent Face Detection (P 33) is on and the frame contains multiple subjects
from the face recognition database, the camera displays the name of the subject
that will be used to set focus and exposure (the subject shown by the green frame).
If no name is entered, the camera will show “---”. Subjects identified using face recognition but not used to set focus and exposure are shown by orange frames, other
subjects by white frames.
Q n FACE RECOGNITION may not function in the following:
-
the subject does not face front.
the face is not positioned within a frame.
the feature of the face varies (because of age or expression).
the subject is in back-lit or poorly light.
More on Photography
37
More on Playback
Playback Options
To view the most recent picture in the LCD monitor, press the a button.
100-0001
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during
playback.
I Favorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to five stars.
38
Playback Options
Playback Zoom
Press T to zoom in on pictures displayed in single-frame playback; press W to
zoom out. When the picture is zoomed in, the selector can be used to view
areas of the image not currently visible in the display.
Zoom indicator
Navigation window shows
portion of image currently
displayed in LCD monitor
Press DISP/BACK to exit zoom.
R The maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.
More on Playback
39
Playback Options
Multi-Frame Playback
Pressing W when a picture is shown full-frame in the LCD monitor displays the
current image with previous and following images in the background. Press
W to increase the number of images displayed to two, nine, or one hundred,
T to view fewer images.
100-0001
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.
40
More on Playback
A Deleting Pictures
To delete individual pictures, multiple selected
pictures, or all pictures, press MENU/OK, select
A ERASE (P 67), and choose from the options
below. Note that deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before proceeding.
PLAYBACK MENU
ERASE
BACK
FRAME
SELECTED FRAMES
ALL FRAMES
SET
Option
FRAME
SELECTED FRAMES
ALL FRAMES
Description
Press the selector left or right to scroll through pictures and press MENU/OK
to delete the current picture (a confirmation dialog is not displayed).
Highlight pictures and press MENU/OK to select or deselect (pictures that
are protected or in a print order are shown by S). When the operation is
complete, press DISP/BACK to display a confirmation dialog, then highlight
OK and press MENU/OK to delete the selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to
delete all unprotected pictures. Pressing DISP/BACK cancels deletion; note
that any pictures deleted before the button was pressed can not be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P 71).
R If a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
More on Playback
41
b Image Search
Search for pictures.
1 Select b IMAGE SEARCH in the playback menu (P 67), highlight one of
the following search criteria, and press MENU/OK:
• BY DATE: Search by date.
• BY FACE: Search for faces from the face recognition database.
• BY I FAVORITES: Search by rating.
• BY SCENE: Search by scene.
• BY TYPE OF DATA: Find all still pictures or all movies.
• BY UPLOAD MARK: Find all pictures selected for upload to a specified destination.
2 Select a search condition. Only pictures that match the search condition
will be displayed. To delete or protect selected pictures or to view the
search results in a slide show, press MENU/OK and choose A ERASE (P 41),
D PROTECT (P 71), or I SLIDE SHOW (P 70).
42
More on Playback
k PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
1 Select NEW BOOK for k PHOTOBOOK ASSIST in the playback menu
(P 67) and choose from the following options:
• SELECT FROM ALL: Choose from all available pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search
conditions (P 42).
R Neither photographs a or smaller nor movies can be selected for photobooks.
2 Scroll through the images and press the selector up to select or deselect.
To display the current image on the cover, press the selector down. Press
MENU/OK to exit when the book is complete.
R The first picture selected becomes the cover image. Press the selector down to
select a different image for the cover.
3 Select COMPLETE PHOTOBOOK (to select all photos or all photos matching the specified search conditions for the book, choose SELECT ALL). The
new book will be added to the list in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically deleted.
More on Playback
43
k PhotoBook Assist
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display
the book, then press the selector left or right to scroll through the pictures.
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions.
• EDIT: Edit the book as described in “Creating a PhotoBook” (P 43).
• ERASE: Delete the book.
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio software.
44
More on Playback
Viewing Panoramas
If you press the selector down when a panorama is displayed full frame, the
camera will play back the picture from left to right. To pause playback, press
the selector down; press the selector down again to resume. To delete the
panorama, press the selector up (b) when playback is paused. To exit to fullframe playback, press the selector up while panorama playback is in progress.
PLAY
STOP
More on Playback
PAUSE
45
Movies
Recording Movies
Press t to shoot a movie. During recording,
y REC and the time remaining will be displayed
in the LCD monitor and sound will be recorded via
the built-in microphone (be careful not to cover the
microphone during recording).
REC
12s
Time available is displayed
in monitor
To end recording, press the t button again. Recording ends automatically
when the movie reaches maximum length or memory is full.
Zoom adjustment
Zoom can be adjusted while recording is in progress. Select the type of zoom available for p MOVIE ZOOM TYPE in the setup menu. Selecting 2 OPTICAL blocks
sound being recorded when zooming.
46
Recording Movies
R Before recording, select a frame size using the W MOVIE MODE option in the
shooting menu. Select h 1280 (1280 × 720) for an aspect ratio of 16 : 9 (High Definition), f (640 × 480) to record standard definition movies, or g (320 × 240) for
longer movies.
R Focus, exposure, and white balance are adjusted automatically throughout recording. The color and brightness of the image may vary from that displayed before
recording begins.
R Sounds made by the camera may be recorded.
Q Do not open the battery-chamber cover during shooting or saving a movie on a
memory card. Failure to observe this precaution could prevent the movie from
being played back.
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
Q The temperature of the camera may rise if it is used to record movies for an extended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
Movies
47
Viewing Movies
During playback, movies are displayed in the LCD monitor
as shown at right. The following operations can be performed while a movie is displayed:
Option
Start/pause
playback
End playback/
delete
Description
Press the selector down to start playback. Press again to
pause.
Press the selector up to end playback. If playback is not in
progress, pressing the selector up will delete the movie.
Press the selector right to advance, left to rewind. If playback
Advance/
is paused, the movie will advance or rewind one frame
rewind
each time the selector is pressed.
Press MENU/OK to pause playback and display volume controls. Press the selector up or down to adjust the volume
Adjust volume
and press MENU/OK to exit. Volume can also be adjusted
from the setup menu.
100-006
PLAY
Q Do not cover the speaker during playback.
48
Movies
Connections
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
1 Turn the camera off and connect an optional A/V cable as shown below.
Connect yellow plug
to video-in jack
Insert into
USB multi-connector
Connect white
plug to audio-in jack
Q When connecting cables, be sure the connectors are fully inserted.
R Image quality may drop during movie playback.
R To view high definition movies on a high definition TV, the optional accessory
is required (P 82, 83).
2 Tune the television to the video input channel. See the documentation
supplied with the television for details.
3 Press the a button for about a second to turn the camera on. The camera
monitor turns off and pictures and movies are played back on the TV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
49
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected
directly to the printer as shown below and pictures can be printed
without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
1 Connect the supplied USB cable as shown and turn the printer on.
2 Turn the camera on.
3 Press the selector left or right to display a picture you wish to print.
4 Press the selector up or down to choose the number of copies (up to 99).
5 Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a
confirmation dialog when settings are complete.
50
Connections
Printing Pictures via USB
6 Press MENU/OK to start printing. Printing can be interrupted by pressing
DISP/BACK, but note that some printers may not respond immediately. If the
printer stops before printing is complete, turn the camera off and then on
again.
7 After confirming that PRINTING has cleared from the camera display, turn
the camera off and disconnect the USB cable.
R Pictures can be printed from a memory card that has been formatted in the camera.
R If no pictures are selected, the camera will print one copy of the current picture.
R Page size, print quality, and border selections are made using the printer.
Printing the Date of Recording
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE).
Connections
51
Printing Pictures via USB
Printing the DPOF Print Order
The K PRINT ORDER (DPOF) option in the playback menu can be used to
create a digital “print order” for PictBridge-compatible printers (P 82) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is a standard that allows pictures to be
printed from “print orders” stored on a memory card. The information in
the order includes the pictures to be printed and the number of copies of
each picture.
1 Select playback mode and press MENU/OK to display the playback menu.
2 Highlight K PRINT ORDER (DPOF) and press MENU/OK.
3 Highlight one of the following options and press MENU/OK:
• WITH DATE s: Print the date of recording on pictures.
• WITHOUT DATE: Do not print the date of recording on pictures.
R Some printers do not support date printing. See the printer manual for details.
4 Press the selector left or right to display a picture you wish to add to or
remove from the print order.
52
Connections
Printing Pictures via USB
5 Press the selector up or down to choose the number of copies (up to 99).
To remove a picture from the print order, press the selector down until the
number of copies is zero.
6 Repeat Steps 4–5 to complete the print order and press MENU/OK when
settings are complete.
7 A confirmation dialog will be displayed. Press MENU/OK to save the print
order.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted containing a print order created by another camera,
a message will be displayed. Create a new print order as described above.
Connections
53
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
Windows: Installing MyFinePix Studio
1 Confirm that the computer meets the following system requirements:
Windows 7 (SP 1)/Windows Vista (SP 2)1
3 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better) 2
Windows XP (SP 3)1
2 GHz Pentium 4 or better
CPU
(2.4 GHz Core 2 Duo or better) 2
512 MB or more
RAM
1 GB or more
(1 GB or more) 2
Free disk space
2 GB or more
Supports DirectX 9 or later
Supports DirectX 7 or later
GPU
(recommended
recommended))
(required; performance not guaranteed with other GPUs)
GPUs)
Video
• 1024 × 768 pixels or more with 24-bit color or better
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
• Internet connection (broadband recommended) required to install
Other
.NET Framework (if necessary), to use auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
• Installation of .Net Framework 3.5 SP1 required to use upload picture feature
and MapViewer.
1 Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
2 Start the computer. Log in to an account with administrator privileges
before proceeding.
54
Connections
Viewing Pictures on a Computer
3 Exit any applications that may be running and insert the installer CD in a
CD-ROM drive.
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control”
dialog will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.
4 If prompted to install Windows Media Player or DirectX, follow the onscreen instructions to complete installation.
5 Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera” (P 58).
Connections
55
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
1 Confirm that the computer meets the following system requirements:
PowerPC or Intel (Core 2 Duo or better) *
Pre-installed copies of Mac OS X version 10.3.9–10.6. Mac OS X 10.7 is
OS
not supported. (visit http://www.fujifilm.com/support/digital_cameras/
compatibility/ for more information)
RAM
256 MB or more (1 GB or more) *
A minimum of 200 MB required for installation with 400 MB available when
Free disk space
FinePixViewer is running
Video
800 × 600 pixels or more with thousands of colors or better
Built-in USB port recommended. Operation is not guaranteed with other USB
Other
ports.
CPU
* Recommended when displaying HD movies.
2 After starting the computer and quitting any applications that may be running, insert the installer CD in a CD-ROM drive and double-click Installer
for Mac OS X.
3 An installer dialog will be displayed; click Installing FinePixViewer to start
installation. Enter an administrator name and password when prompted
and click OK, then follow the on-screen instructions to install FinePixViewer.
Click Exit to quit the installer when installation is complete.
56
Connections
Viewing Pictures on a Computer
4 Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software.
5 Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,
and select Preferences… from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other… in the
When a camera is connected, open menu, then select FPVBridge in the
“Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this camera opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera” (P 58).
Connections
57
Viewing Pictures on a Computer
Connecting the Camera
1 If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
R Windows users may require the Windows CD when starting the software for
the first time.
Q Loss of power during transfer could result in loss of data or damage to the memory card. Charge the battery before connecting the camera.
2 Turn the camera off and connect the
supplied USB cable as shown, making sure the connectors are fully inserted. Connect the camera directly
to the computer; do not use a USB
hub or keyboard.
3 Press the a button for about a second to turn the camera on. After starting MyFinePix Studio or FinePixViewer, follow the on-screen instructions
to copy pictures to the computer. To exit without copying pictures, click
Cancel.
58
Connections
Viewing Pictures on a Computer
For more information on using the supplied software, start the application
and select the appropriate option from the Help menu.
Q If a memory card containing a large number of images is inserted, there may be a
delay before the software starts and you may be unable to import or save images.
Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in
progress before turning the camera off or disconnecting the USB cable. Failure to
observe this precaution could result in loss of data or damage to the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server
using the supplied software in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection.
Connections
59
Viewing Pictures on a Computer
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After quitting the software and disconnecting the camera, drag
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control panel and use “Programs and
Features” (Windows 7/Windows Vista) or “Add or Remove Programs” (Windows XP) to
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may
be displayed; read the contents carefully before clicking OK.
60
Connections
Menus
Using the Menus: Shooting Mode
Using the Shooting Menu
To display the shooting menu, press MENU/OK in
shooting mode. Highlight items and press the selector right to view options, then highlight an option
and press MENU/OK. Press DISP/BACK to exit when settings are complete. The options available vary with
the shooting mode selected.
Shooting Menu Options
A SHOOTING MODE
Choose a shooting mode according to the type of subject (P 20).
(defaults to Q)
(defaults to AUTO)
N ISO
N ISO
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mottling may appear in pictures taken at high sensitivities.
100
Bright
Less noticeable
ISO
Scene
Noise (mottling)
3200
Dark
More noticeable
Option
Description
AUTO
Sensitivity is adjusted automatically in response to shooting conditions.
3200 / 1600 / 800 / 400 /
Sensitivity is set to the specified value, which is shown in the display.
200 / 100
61
Using the Menus: Shooting Mode
O IMAGE SIZE
O IMAGE
Choose the image size and aspect ratio at which pictures are recorded. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
(defaults to O 4:3)
O4:3
Size
Aspect ratio
Size Versus Aspect Ratio
Size
Option
O
P
Q
4 : 3: Pictures have the same
proportions as the camera
display.
3
Aspect ratio
3 : 2: Pictures have the same
proportions as a frame of
35 mm film.
2
4
62
Prints at sizes up to
34 × 25 cm (13.5 × 10 in.)
24 × 18 cm (9.5 × 7 in.)
17 × 13 cm (7 × 5 in.)
16 : 9: Suited for display on
High Definition (HD) devices.
9
3
16
Menus
Using the Menus: Shooting Mode
T IMAGE QUALITY
Choose how much image files are compressed.
Option
FINE
NORMAL
Description
Low compression. Select for higher image quality.
High compression. Select this option to store more pictures.
P FINEPIX COLOR
Enhance contrast and color saturation or take pictures in black and white.
Option
c STANDARD
a CHROME
b B&W
(defaults to N)
(defaults to c)
Description
Standard contrast and saturation. Recommended in most situations.
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens
and blues in landscapes.
Take pictures in black and white.
R Settings other than c STANDARD are shown by an icon in the LCD monitor.
R Depending on the subject, the effects of a CHROME may not be visible in the LCD monitor.
Menus
63
Using the Menus: Shooting Mode
D WHITE BALANCE
For natural colors, choose a setting that matches the light source.
Option
AUTO
i
j
k
l
m
n
(defaults to AUTO)
Description
White balance adjusted automatically.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the LCD monitor.
R CONTINUOUS
Capture motion in a series of pictures.
Option
ITOP 3
OFF
(defaults to OFF)
Description
The camera takes up to 3 pictures while the shutter button is pressed.
One photograph is taken each time the shutter button is pressed.
R Focus and exposure are determined by the first frame in each series.
R The flash turns off automatically. The previously selected flash mode is restored when OFF is
selected for R CONTINUOUS
CONTINUOUS..
R Frame rate varies with shutter speed.
R The number of pictures that can be recorded depends on the memory available.
64
Menus
Using the Menus: Shooting Mode
b FACE DETECTION
Choose whether the camera automatically detects and sets focus and exposure for human portrait subjects (P 33).
F AF MODE
This option controls how the camera selects the focus area. Regardless of the option selected,
the camera will focus on the subject in the center of the LCD monitor when macro mode is on.
Option
r CENTER
Description
The camera focuses on the subject in the center of the frame.
Position the subject in the center focus area and press the selector left. Focus will
x TRACKING
track the subject as it moves through the frame.
R Note that in x mode, the camera focuses continuously, increasing the drain on the batteries,
and that the sound of the camera focusing may be audible.
n FACE RECOGNITION
Add portrait subjects to the face recognition database. These subjects will be given priority
during Intelligent Face Detection, and their names and other information can be viewed during
playback (P 34).
P PANORAMA MODE
Choose how panoramas are framed (P 23).
Menus
(defaults to C)
65
Using the Menus: Shooting Mode
F MOVIE AF MODE
F MOVIE
This option controls how the camera selects the focus area for movies.
Option
r CENTER
u CONTINUOUS
(defaults to r)
Description
The camera focuses on the subject in the center of the frame.
The camera continuously adjusts focus to reflect changes in the distance to
subjects near the center of the frame.
R Note that in u mode, the camera focuses continuously, increasing the drain on the battery,
and that the sound of the camera focusing may be audible.
W MOVIE MODE
Choose a frame size for movies (P 47).
66
(defaults to h)
Menus
Using the Menus: Playback Mode
Using the Playback Menu
To display the playback menu, press MENU/OK in
playback mode. Highlight items and press the
selector right to view options, then highlight an
option and press MENU/OK. Press DISP/BACK to exit
when settings are complete.
Playback Menu Options
k PHOTOBOOK ASSIST
Create books from your favorite photos (P 43).
b IMAGE SEARCH
Search for pictures (P 42).
A ERASE
Delete all or selected pictures (P 41).
Menus
67
Using the Menus: Playback Mode
i MOVIE EDIT
Edit movies.
■ MOVIE TRIMMING
Remove opening or ending footage to create an edited copy of the current movie.
1 Display the desired movie.
2 Select i MOVIE EDIT in the playback menu, then select MOVIE TRIMMING. To remove
footage from the start of the copy, proceed to Step 3; otherwise, proceed to Step 4.
3 Press the selector down to begin playback and press it down again when the new opening
frame is reached.
4 Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,
proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).
5 Press the selector down to begin playback and press it down again when the new closing
frame is reached.
6 Press MENU/OK to save the copy.
■ MOVIE JOIN
Add existing footage to the end of the current movie to create an edited copy.
1 Display the desired movie.
2 Select i MOVIE EDIT in the playback menu, then select MOVIE JOIN.
3 Press the selector left or right to highlight a movie.
4 Press MENU/OK to add the highlighted footage to the end of the current movie and save the
resulting copy, or press DISP/BACK to exit without creating a copy.
R Both movies must have been recorded at the same frame size and frame rate and have a
combined file size of no more than 2 GB.
68
Menus
Using the Menus: Playback Mode
j MARK FOR UPLOAD TO
j MARK
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).
■ Selecting Pictures for Upload
1 Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and
movies for upload to Facebook.
2 Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press
DISP/BACK to exit when all the desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R During playback, selected pictures are indicated by j YouTube or j FACEBOOK icons.
■ RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the
operation is complete.
■ Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix
Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio and connecting the camera to a computer, see
“Viewing Pictures on a Computer” (P 54).
Menus
69
Using the Menus: Playback Mode
(defaults to MULTIPLE)
I SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at
any time by pressing MENU/OK.
Option
NORMAL
FADE-IN
NORMAL g
FADE-IN g
MULTIPLE
Description
Press selector left or right to go back or skip ahead one frame. Select FADE-IN
for fade transitions between frames.
As above, except that camera automatically zooms in on faces selected with
Intelligent Face detection.
Display several pictures at once.
R The camera will not turn off automatically while a slide show is in progress.
70
Menus
Using the Menus: Playback Mode
D PROTECT
Protect pictures from accidental deletion.
1 Select D PROTECT in the playback menu.
2 Highlight one of the following options and press MENU/OK:
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card is formatted (P
( 76).
G CROP
Create a cropped copy of the current picture.
1 Display the desired picture.
2 Select G CROP in the playback menu.
3 Use the zoom buttons to zoom in and out and use the selector to scroll the picture until the
desired portion is displayed.
4 Press MENU/OK to display a confirmation dialog.
5 Press MENU/OK again to save the cropped copy to a separate file.
R Larger crops produce larger copies; all copies have an aspect ratio of 4 : 3. If the size of the final
copy will be a, OK will be displayed in yellow.
Menus
71
Using the Menus: Playback Mode
O RESIZE
Create a small copy of the current picture.
1 Display the desired picture.
2 Select O RESIZE in the playback menu.
3 Highlight a size and press MENU/OK to display a confirmation dialog.
4 Press MENU/OK to save the resized copy to a separate file.
R The sizes available vary with the size of the original image.
C IMAGE ROTATE
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD
monitor.
1 Display the desired picture.
2 Select C IMAGE ROTATE in the playback menu.
3 Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclockwise.
4 Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it
is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures (P
( 71).).
R The camera may not be able to rotate pictures created with other devices.
72
Menus
Using the Menus: Playback Mode
i ERASE FACE RECOG.
Remove face recognition links from the current image. When this option is selected, the camera will zoom in on an area in the current picture that it has matched with a face in the face
recognition database. If the match is not correct, press MENU/OK to remove the link to the face
recognition database.
R Face recognition links can not be removed from copies with a size of a or smaller.
K PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 52).
Menus
73
The Setup Menu
Using the Setup Menu
1 Display the setup menu.
1.1 Press MENU/OK to display the menu for the current mode.
1.2 Press the selector left to highlight the tab for the current menu.
1.3 Press the selector down to highlight X.
SET-UP
SET
SET
EXIT
Tab
1.4 Press the selector right to place the cursor in the setup menu.
2 Adjust settings.
Highlight items and press the selector right to view options, then highlight an option and press MENU/OK. Press DISP/BACK to exit when settings
are complete.
74
Menus
The Setup Menu
Setup Menu Options
F DATE/TIME
Set the camera clock (P 15).
N TIME DIFFERENCE
(defaults to h)
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between local time and your home time zone:
1 Highlight g LOCAL and press the selector right.
2 Use the selector to choose the time difference between local time and your home time zone.
3 Press MENU/OK.
To switch between local time and your home time zone, highlight g LOCAL or h HOME and
press MENU/OK.
Option
h HOME
g LOCAL
Description
Switch to the time currently selected for F DATE/TIME (see above).
Switch to local time. If this option is selected, g and the time and date will
be displayed in yellow for three seconds each time the camera is turned on.
La
Choose a language (P 102).
(defaults to ENGLISH)
(defaults to OFF)
o SILENT MODE
Select ON to disable the speaker and flash in situations in which camera sounds or lights may be
unwelcome (note that the flash will still fire in C mode).
Menus
75
The Setup Menu
R RESET
Reset all settings except F DATE/TIME, N TIME DIFFERENCE, O BACKGROUND COLOR,
and Q VIDEO SYSTEM to default values.
1 Highlight R RESET and press the selector right to display a confirmation dialog.
2 Highlight OK and press MENU/OK.
K FORMAT
This option will format the memory card.
Q All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
A IMAGE DISP.
Choose how long pictures are displayed in the LCD monitor after shooting.
Option
3 SEC
1.5 SEC
ZOOM (CONTINUOUS)
OFF
(defaults to 1.5 SEC)
Description
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).
Colors may differ slightly from those in the final image.
Pictures are displayed until the MENU/OK button is pressed.
Pictures are not displayed after shooting.
R OFF has no effect in continuous shooting mode.
76
Menus
The Setup Menu
(defaults to CONT.)
B FRAME NO.
New pictures are stored in image files named using a four-digit file
Frame number
number assigned by adding one to the last file number used. The file
100-0001
number is displayed during playback as shown at right. B FRAME NO.
controls whether file numbering is reset to 0001 when a new memory Directory
File
card is inserted or the current memory card is formatted.
number
number
Option
CONTINUOUS
RENEW
Description
Numbering continues from the last file number used or the first available
file number, whichever is higher. Choose this option to reduce the number of pictures with duplicate file names.
Numbering is reset to 0001 after formatting or when a new memory card
is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P
( 93).
R Selecting R RESET ((P 76) sets B FRAME NO. to CONTINUOUS but does not reset the file
number.
R Frame numbers for pictures taken with other cameras may differ.
G OPERATION VOL.
(defaults to c)
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF
(mute) to disable control sounds.
H SHUTTER VOLUME
(defaults to c)
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute)
to disable the shutter sound.
Menus
77
The Setup Menu
e SHUTTER SOUND
Choose the sound made by the shutter.
(defaults to i)
I PLAYBACK VOLUME
Adjust the volume for movie playback.
(defaults to 7)
J LCD BRIGHTNESS
Control the brightness of the display.
(defaults to 0)
R When a shooting mode option other than P (PROGRAM AE) is selected, display brightness is
automatically adjusted during shooting regardless of a option selected for J LCD BRIGHTNESS in response to ambient lighting conditions.
E LCD MODE
Choose whether the display automatically dims to save power.
(defaults to U ON)
(defaults to 2 MIN)
M AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned
off manually. Note that in some situations the camera turns off automatically even when OFF
is selected.
(defaults to OFF)
L DIGITAL IS
When AUTO is selected, image stabilization is performed to reduce blur when the subject is
poorly lit.
78
Menus
The Setup Menu
(defaults to ON)
m BLINK DETECTION
Choose ON to activate blink detection. If an option other than OFF is selected for A IMAGE
DISP. (P
( 76)
76), a warning will be displayed if the camera detects subjects who may have blinked
when the picture was taken. If ZOOM (CONTINUOUS) is selected, you can press the f button
to zoom in on these subjects.
BLINK DETECTION
BLINK DETECTION
FACE ZOOM
STORE
NEXT
STORE
ERASE
ERASE
R Blink detection is not performed if the camera fails to detect a face or when OFF is selected
for A IMAGE DISP..
DISP..
Menus
79
The Setup Menu
(defaults to OFF)
D DIGITAL ZOOM
If ON is selected, pressing T button at the maximum optical zoom position will trigger digital
zoom, further magnifying the image.
The Zoom Indicator
W
T
DIGITAL ZOOM on
Optical zoom
W
Digital zoom
T
DIGITAL ZOOM off
Optical zoom
Q Digital zoom produces lower quality images than optical zoom.
R Digital zoom can not be used when shooting in Q mode.
p MOVIE ZOOM TYPE
Choose the zoom type when recording movies.
(defaults to 1)
R Digital zoom produces lower quality images than optical zoom.
R Optical zoom blocks sound being recorded when zooming.
80
Menus
The Setup Menu
O BACKGROUND COLOR
Choose a color scheme.
c GUIDANCE DISPLAY
Choose whether to display tool tips.
(defaults to ON)
Q VIDEO SYSTEM
Choose a video mode for connection to a TV.
Option
NTSC
PAL
Description
Select this mode for connection to video devices in North America, the Caribbean, parts of Latin America, and some East Asian countries.
Select this mode for connection to video devices in the United Kingdom and
much of Europe, Australia, New Zealand, and parts of Asia and Africa.
(defaults to OFF)
S DATE STAMP
To add shooting date and time, choose T + U. To add only shooting date, choose T. When
OFF is selected, no information will be added to the pictures.
Q Added shooting date and time can not be deleted from the pictures. To take pictures without
date and time, select OFF for S DATE STAMP.
STAMP.
Q When the camera clock is not set, setting dialog will be displayed. Set the date and time ((P 15).).
Q When using S DATE STAMP,
STAMP, selecting WITHOUT DATE for K PRINT ORDER (DPOF) is
recommended (P
( 52).).
Q Date and time can not be added to the movies and the panoramas.
Menus
81
Technical Notes
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other
manufacturers.
DIGITAL CAMERA
■ Printing
FINEPIX JX500 Series
A/V cable (optional)
USB cable
(supplied)
PictBridge-compatible
printer *
Printer
TV *
SD/SDHC/SDXC
memory card
*
■ Computer Related
USB cable (supplied)
SD card slot or card reader
Computer *
* Available separately.
82
■ Audio/Visual
HDMI cable
(sold separately)
HDP-L1
HD player
HDTV *
Optional Accessories
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_
cameras/index.html.
Rechargeable NP-45A: Additional large-capacity NP-45A rechargeable
Li-ion batteries batteries can be purchased as required.
Battery
chargers
BC-45W: Replacement battery chargers can be purchased
as required. The BC-45W charges an NP-45A/NP-45B
battery in about 120 minutes at +20 °C (+68 °F).
A/V cable
AV-C1: Use for viewing pictures on TV.
AV-C1
HD players
HDP-L1 (requires HDMI cable, available from third-party suppliers): Connect to a High Definition (HD) TV to view photographs
and movies from SD/SDHC memory cards.
Technical Notes
83
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
If the camera will not be used for an
extended period, remove the battery
and memory card. Do not store or
use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very
high temperatures, such as in a
closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields,
such as near a broadcasting antenna, power line, radar emitter, motor,
transformer, or magnet
• in contact with volatile chemicals
such as pesticides
• next to rubber or vinyl products
84
■ Water and Sand
Exposure to water and sand can also
damage the camera and its internal
circuitry and mechanisms. When
using the camera at the beach or
seaside, avoid exposing the camera
to water or sand. Do not place the
camera on a wet surface.
■ Condensation
Sudden increases in temperature,
such as occur when entering a heated
building on a cold day, can cause condensation inside the camera. If this
occurs, turn the camera off and wait
an hour before turning it on again. If
condensation forms on the memory
card, remove the card and wait for the
condensation to dissipate.
Technical Notes
Caring for the Camera
Cleaning
Use a blower to remove dust from the lens and LCD monitor, then gently wipe
with a soft, dry cloth. Any remaining stains can be removed by wiping gently
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lenscleaning fluid has been applied. Care should be taken to avoid scratching the
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile chemicals.
Traveling
Keep the camera in your carry-on baggage. Checked baggage may suffer
violent shocks that could damage the camera.
Technical Notes
85
Troubleshooting
Problems and Solutions
Power and Battery
Problem
The camera does not
turn on.
The battery runs down
quickly.
The camera turns off
suddenly.
Charging is slow.
The battery does not
charge. / Battery fault
icon s is displayed.
86
Solution
• The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery
(P 6).
• The battery is inserted incorrectly:
incorrectly: Reinsert in the correct orientation (P
(P 6).
• The battery-chamber cover is not latched
latched:: Latch the battery-chamber cover (P
(P 6).
• The battery is cold
cold:: Warm the battery by placing it in a pocket or other warm place and reinsert
it in the camera immediately before taking a picture.
• There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
• Q is selected for shooting mode
mode:: Select B mode to reduce the drain on the battery
(P 20).
• x TRACKING is selected for F AF MODE:
MODE: Select a different AF mode ((P
P 65).
• The battery has been charged many times
times:: The battery has reached the end of its charging
life. Purchase a new battery.
Charge the battery (P
(P 11) or insert a fully-charged spare battery ((P
P 6).
Charge the battery at room temperature (P
(P vi).
• Reinsert the battery in the correct orientation and make sure that the power connection is made
(P 6, 11).
• There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
• The battery has been charged many times
times:: The battery has reached the end of its charging
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
• The battery is too hot or too cold
cold:: Wait for the battery temperature to stabilize (P
(P 103).
Problems and Solutions
Menus and Displays
Problem
Menus and displays are
not in English.
Solution
Select ENGLISH for L a ((P
P 15, 75).
Shooting
Problem
•
•
•
No picture is taken when •
the shutter button is
•
pressed.
•
•
Solution
Memory is full:
full: Insert a new memory card or delete pictures ((P
P 7, 41).
Memory is not formatted:
formatted: Format the memory card (P
(P 76).
There is dirt on the memory card contacts
contacts:: Clean the contacts with a soft, dry cloth.
The memory card is damaged
damaged:: Insert a new memory card (P
(P 7).
The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery
(P 6).
The camera has turned off automatically
automatically:: Turn the camera on ((P
P 13).
The shutter button is pressed right after shooting a panorama:
panorama: Wait for a little while
then press the shutter button (P
(P 23).
The LCD monitor goes
dark after shooting.
The LCD monitor may darken while the flash charges. Wait for the flash to charge ((P
P 30).
The camera does not
focus.
• The subject is close to the camera
camera:: Select macro mode (P
(P 29).
• The subject is far away from the camera
camera:: Cancel macro mode (P
(P 29).
• The subject is not suited to autofocus
autofocus:: Use focus lock ((P
P 26).
Macro mode is not
Choose a different shooting mode ((P
P 20).
available
Intelligent Face Detection Intelligent Face Detection is not available in the current shooting mode:
mode: Choose a differis not available.
ent shooting mode (P
(P 20).
Troubleshooting
87
Problems and Solutions
Problem
No face is detected.
Wrong subject is
selected.
The flash does not fire.
Some flash modes are
not available.
The flash does not fully
light the subject.
Pictures are blurred.
88
Solution
• The subject’s face is obscured by sunglasses, a hat, long hair, or other objects:
objects: Remove
the obstructions.
• The subject’s face occupies only a small area of the frame
frame:: Change the composition so that
the subject’s face occupies a larger area of the frame ((P
P 26).
• The subject’s head is tilted or horizontal
horizontal:: Ask the subject to hold their head straight.
• The camera is tilted
tilted:: Keep the camera level (P
(P 17).
• The subject’s face is poorly lit
lit:: Shoot in bright light.
The selected subject is closer to the center of the frame than the main subject. Recompose the
picture or turn face detection off and frame the picture using focus lock (P
(P 26).
• The flash is not available in the current shooting mode
mode:: Choose a different shooting mode
(P 20).
• The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery
(P 6).
• The camera is in continuous mode
mode:: Select OFF for R CONTINUOUS ((P
P 64).
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 75).
• The flash is off (P): Choose a different flash mode ((P
P 30).
• The desired flash mode is not available in the current shooting mode
mode:: Choose a different
shooting mode (P
(P 20).
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 75).
• The subject is not in range of the flash
flash:: Position the subject in range of the flash (P
(P 102).
• The flash window is obstructed
obstructed:: Hold the camera correctly ((P
P 17).
• The lens is dirty
dirty:: Clean the lens ((P
P 85).
• The lens is blocked
blocked:: Keep objects away from the lens (P
(P 17).
• s is displayed during shooting and the focus frame is displayed in red:
red: Check focus
before shooting ((P
P 91).
• k is displayed during shooting:
shooting: Use the flash or a tripod (P
(P 31).
Troubleshooting
Problems and Solutions
Problem
Pictures are mottled.
Vertical lines appear in
pictures.
“Smear” in the form of
vertical purple or white
lines appears in the
display.
Solution
This is normal when slow shutter speeds are selected at high temperatures and does not indicate
a malfunction.
The camera has been used continuously at high temperatures. Turn the camera off and wait for
it to cool down.
Vertical purple or white lines may appear after the camera has been used continuously at high
temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD
image sensors and does not indicate a malfunction. These lines are recorded in movies but do not
appear in photographs. Avoid framing bright objects when filming movies.
Playback
Problem
Solution
Pictures are grainy.
The pictures were taken with a different make or model of camera.
Playback zoom is unavailThe pictures were created using O RESIZE or with a different make or model of camera.
able.
• Playback volume is too low:
low: Adjust playback volume (P
(P 78).
• The microphone was obstructed
obstructed:: Hold the camera correctly during recording ((P
P 17, 46).
No sound in movie
• The speaker is obstructed
obstructed:: Hold the camera correctly during playback ((P
P 48).
playback.
• When 2 OPTICAL is selected for p MOVIE ZOOM TYPE
TYPE,, zooming blocks
sound being recorded:
recorded: Select 1 DIGITAL for p MOVIE ZOOM TYPE ((P
P 46).
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the device with
deleted.
which it was originally applied (P
(P 71).
File numbering is
The battery-chamber cover was opened while the camera was on. Turn the camera off before
unexpectedly reset.
opening the battery-chamber cover (P
(P 13).
Troubleshooting
89
Problems and Solutions
Connections/Miscellaneous
Problem
No picture or sound.
No color
The computer does not
recognize the camera.
Pictures can not be
printed.
Only one copy is printed/
the date is not printed.
The camera is unresponsive.
The camera does not
function as expected.
No sound.
Date and time added by
S DATE STAMP
are not correct.
Solution
The camera is not properly connected
connected:: Connect the camera properly (P
(P 49).
An A/V cable was connected during movie playback:
playback: Connect the camera once movie playback has ended.
Input on the television is set to “TV”:
“TV”: Set input to “VIDEO”.
The camera is not set to the correct video standard:
standard: Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 81).
• The volume on the TV is too low:
low: Adjust the volume.
Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 81).
•
•
•
•
Be sure the camera and computer are correctly connected ((P
P 58).
• The camera is not properly connected
connected:: Connect the camera correctly (P
(P 50).
• The printer is off
off:: Turn the printer on.
The printer is not PictBridge compatible.
• Temporary camera malfunction:
malfunction: Remove and reinsert the battery (P
(P 6).
• The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery (P
(P 6).
Remove and reinsert the battery (P
(P 6). If the problem persists, contact your FUJIFILM dealer.
Turn silent mode off (P
(P 75).
The camera clock is not correctly set
set:: Reset the date and time (P
(P 15).
T + U or T is selected for S DATE STAMP option
option:: Added shooting date and time
Date and time are added
can not be deleted from the pictures. To take pictures without date and time, select OFF for
to the pictures.
S DATE STAMP ((P
P 81).
FinePixViewer can not be FinePixViewer does not support Mac OS X 10.7 or later. Use the application supplied with Mac OS X
installed or run.
or third-party software ((P
P 56).
90
Troubleshooting
Warning Messages and Displays
The following warnings are displayed in the LCD monitor:
Warning
B ((red
red))
A ((blinks
blinks red)
red)
k
Description
Low battery. Charge the battery ((P
P 11) or insert a fully-charged spare battery ((P
P 6).
Battery exhausted. Charge the battery (P
(P 11) or insert a fully-charged spare battery ((P
P 6).
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.
The camera can not focus. Try one of the following solutions:
s
• Use focus lock to focus on another subject at the same distance, then recompose the picture
(displayed in red with red
(P 26).
focus frame)
frame)
• Use macro mode to focus when taking close-ups (P
(P 29).
Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject
displayed in red
is dark, use the flash (P
(P 30).
FOCUS ERROR
Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again,
TURN OFF THE CAMERA
taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.
AND TURN ON AGAIN
• The memory card is not formatted or was formatted in a computer or other device
device::
Format the memory card using the K FORMAT option in the camera setup menu ((P
P 76).
CARD NOT INITIALIZED • The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 76). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
PROTECTED CARD
The memory card is locked. Unlock the card ((P
P 7).
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (P
(P 76).
Troubleshooting
91
Warning Messages and Displays
Warning
CARD ERROR
b MEMORY FULL
WRITE ERROR
READ ERROR
92
Description
The memory card is not formatted for use in the camera. Format the card (P
(P 76).
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts
with a soft, dry cloth. If the message is repeated, format the card ((P
P 76). If the message persists,
replace the card.
Incompatible memory card. Use a compatible card (P
(P 9).
Camera malfunction. Contact a FUJIFILM dealer.
The memory card is full and pictures can not be recorded or copied. Delete pictures or insert a
memory card with more free space.
• Memory card error or connection error
error:: Reinsert the card or turn the camera off and then
on again. If the message persists, contact a FUJIFILM dealer.
• Not enough memory remaining to record additional pictures
pictures:: Delete pictures or insert
a memory card with more free space.
• The memory card is not formatted
formatted:: Format the memory card (P
(P 76).
• The file is corrupt or was not created with the camera
camera:: The file can not be viewed.
• The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 76). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
Troubleshooting
Warning Messages and Displays
Warning
FRAME NO. FULL
Description
The camera has run out of frame numbers (current frame number is 999-9999). Format the
memory card and select RENEW for B FRAME NO. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for B FRAME NO. ((P
P 77).
PRESS AND HOLD
An attempt was made to choose a flash mode or adjust the volume with the camera in silent
THE DISP BUTTON TO
mode. Exit silent mode before choosing a flash mode or adjusting the volume ((P
P 75).
DEACTIVATE SILENT MODE
A search has returned more 5,000 results, or more than 999 frames were selected for deletion.
TOO MANY FRAMES
Perform a different search or select fewer pictures.
An attempt was made to delete or rotate to a protected picture. Remove protection and try
PROTECTED FRAME
again (P
(P 71).
a pictures can not be cropped.
a CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
An attempt was made to create a resized copy at a size equal to or larger than the original.
a CANNOT EXECUTE
Choose a smaller size.
CAN NOT ROTATE
An attempt was made to rotate a picture that can not be rotated.
F CAN NOT ROTATE Movies can not be rotated.
Troubleshooting
93
Warning Messages and Displays
Warning
NO CARD
INSERT A NEW CARD
NO CARD
DPOF FILE ERROR
CAN NOT SET DPOF
F CAN NOT SET DPOF
Description
No memory card inserted; insert a memory card.
The DPOF print order on the current memory card contains more than 999 images.
The picture can not be printed using DPOF.
Movies can not be printed using DPOF.
A connection error occurred while pictures were being printed or copied to a computer or other
COMMUNICATION ERROR
device. Confirm that the device is turned on and that the USB cable is connected.
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details).
PRINTER ERROR
To resume printing, turn the printer off and then turn it back on.
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If
RESUME?
printing does not resume automatically, press MENU/OK to resume.
An attempt was made to print a movie, a picture not created with the camera, or a picture in a
format not supported by the printer. Movies and some pictures created with other devices can
CANNOT BE PRINTED not be printed; if the picture is a still picture created with the camera, check the printer manual
to confirm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures
can not be printed.
94
Troubleshooting
Appendix
Tips and Tricks
The following tips and tricks will help you get the most from your camera.
Battery Performance
Choose the following settings for improved battery performance:
• b FACE DETECTION (P 33): OFF
• F AF MODE (P 65): r CENTER
• E LCD MODE (P 78): U POWER SAVE ON
The Self-timer
• To prevent blur caused by the camera moving when the shutter button is pressed,
use the two-second timer.
• To turn the timer off, press DISP/BACK.
95
Tips and Tricks
Intelligent Face Detection
When ON is selected for b FACE DETECTION (P 33), you can:
• Zoom in on faces when ZOOM (CONTINUOUS) is selected for A IMShooting
AGE DISP. (P 76).
• Zoom in on faces during slide shows (P 70) or by pressing the selector
Playback
down during playback.
• Search for faces using b IMAGE SEARCH (P 42).
• Crop the background from portraits using G CROP (P 71).
• Print one copy for each person in the photo.
Printing
96
Appendix
Tips and Tricks
Pro Tips
• To photograph backlit subjects, select C NATURAL & N for
A SHOOTING MODE (P 20) and position your subject in the
center of the frame.
• To photograph subjects that are in motion, select x TRACKING for F AF MODE (P 65).
• To photograph night scenes, raise sensitivity (P 61) and turn the
flash on (P 30).
Appendix
97
Memory Card Capacity
The following table shows the recording time or number of pictures available
at different image sizes. All figures are approximate; file size varies with the
scene recorded, producing wide variations in the number of files that can be
stored. The number of exposures or length remaining may not diminish at an
even rate.
■ FinePix JX550 - JX590
Medium
2 GB
O
Photographs
Movies*
T
O 4:3
O 3:2
O 16:9
P 4:3
P 16:9
Q 4:3
Q 16:9
h1280†
FINE
240
270
310
470
700
920
1680
4 GB
NORMAL
470
530
620
920
1340
1740
3040
9 min.
FINE
480
540
640
940
1400
1840
3360
NORMAL
950
1060
1250
1840
2690
3490
6080
18 min.
8 GB
FINE
970
1080
1280
1890
2810
3690
6720
NORMAL
1910
2130
2510
3680
5380
6980
12160
37 min.
f
27 min.
55 min.
111 min.
g
58 min.
116 min.
233 min.
* Individual movies can not exceed 2 GB in size or 29 minutes in length. If more than 2 GB are available, the camera will show the time remaining for a movie 2 GB in size.
† Use a G card or better when shooting HD movies.
98
Appendix
Memory Card Capacity
■ FinePix JX500 - JX540
Medium
2 GB
O
Photographs
Movies*
T
O 4:3
O 3:2
O 16:9
P 4:3
P 16:9
Q 4:3
Q 16:9
h1280†
FINE
270
310
360
530
700
1150
1680
4 GB
NORMAL
540
610
710
1030
1340
2140
3040
9 min.
FINE
550
620
730
1060
1400
2300
3360
NORMAL
1090
1220
1430
2060
2690
4290
6080
18 min.
8 GB
FINE
1110
1240
1470
2130
2810
4600
6720
NORMAL
2180
2440
2870
4120
5380
8580
12160
37 min.
f
27 min.
55 min.
111 min.
g
58 min.
116 min.
233 min.
* Individual movies can not exceed 2 GB in size or 29 minutes in length. If more than 2 GB are available, the camera will show the time remaining for a movie 2 GB in size.
† Use a G card or better when shooting HD movies.
Appendix
99
Specifications
System
Model
Effective pixels
CCD
Storage media
File system
File format
Image size (pixels)
Lens
Focal length
Digital zoom
100
Digital Camera FinePix JX500 Series
FinePix JX550 - JX590
16 million
FinePix JX500 - JX540
14 million
1/2.3 -in., square-pixel CCD with primary color filter
SD/SDHC/SDXC memory cards
Compliant with Design Rule for Camera File System (DCF)
(DCF),, Exif 2.3, and Digital Print Order
Format (DPOF)
• Still pictures:
pictures: Exif 2.3 JPEG (compressed) • Movies
Movies:: AVI-format Motion JPEG
FinePix JX550 - JX590
• O 4 : 3:
3: 4,608 × 3,440
• O 3 : 2:
2: 4,608 × 3,072
• O 16 : 9:
9: 4,608 × 2,592
• P 4 : 3:
3: 3,264 × 2,448
• P 16 : 9:
9: 3,072 × 1,728
• Q 4 : 3:
3: 2,304 × 1,728
• Q 16 : 9:
9: 1,920 × 1,080
FinePix JX500 - JX540
• O 4 : 3:
3: 4,288 × 3,216
• O 3 : 2:
2: 4,288 × 2,864
• O 16 : 9:
9: 4,288 × 2,416
• P 4 : 3:
3: 3,072 × 2,304
• P 16 : 9:
9: 3,072 × 1,728
• Q 4 : 3:
3: 2,048 × 1,536
• Q 16 : 9:
9: 1,920 × 1,080
Fujinon 5 × optical zoom lens, F3.5 (wide angle) – F6.3 (telephoto)
f=4.6 mm–23.0 mm (35-mm format equivalent: 26 mm–130 mm)
FinePix JX550 - JX590
Approx. 7.2 × (up to 36.0 × when combined with optical zoom)
FinePix JX500 - JX540
Approx. 6.7 × (up to 33.5 × when combined with optical zoom)
Appendix
Specifications
System
Aperture
Focus range
(distance from front of lens)
Sensitivity
F3.5/F8.0 (wide angle),
angle), F6.3/F15.0 (telephoto)
(telephoto);; uses Neutral Density (ND
(ND)) filter
Approx. 50 cm (1.6 ft.)–infinity (wide angle);
angle); 90 cm (2.9 ft.)–infinity (telephoto)
• Macro
Macro:: approx. 10 cm–80 cm/0.3 ft.–2.6 ft. (wide angle)
angle);; 80 cm–1.3 m/2.6 ft.–4.2 ft. (telephoto)
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200 (image size Q);
AUTO
Metering
256-segment throughhrough-tthehe-llens (TTL) metering
Exposure control
Programmed AE
Exposure compensation –2 EV – +2 EV in increments of 1/3 EV
Image stabilization
Digital image stabilization
Shutter speed
• AUTO mode:
mode: 1/4 s–
s–11/1,400 s
(combined mechanical and • Other modes:
modes: 8 s–1
s–1/1,400 s
electronic shutter)
Continuous
Up to 1.1 fps; max. 3 frames
Focus
• Mode
Mode:: Single AF, continuous AF
• Autofocus system:
system: Contrast-detect TTL AF
• Focus-area selection
selection:: CENTER, TRACKING
White balance
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, and incandescent
Self-timer
Off, 10 sec., 2 sec.
Appendix
101
Specifications
System
Flash
Flash mode
LCD monitor
Movies
Languages
CCD-metered auto flash control; effective range when sensitivity is set to AUTO is approx.
50 cm–4.5 m/1.6 ft.–14.7 ft. (wide angle),
angle), 90 cm–2.5 m/2.9 ft.–8.2 ft. (telephoto)
(telephoto);; effective
range in macro mode is approx. 30 cm–80 cm/0.9 ft.–2.6 ft. (wide angle)
angle),, 80 cm–1.2 m/2.6 ft.–
3.9 ft. (telephoto)
AUTO,, N, P, O (face detection off);
AUTO
off); K, L, P, M (face detection on)
FinePix JX580 - JX590 / JX520 - JX540
3.0-in. (7.6 cm),
cm), 230k-dot color LCD monitor; frame coverage approx. 96%
FinePix JX550 - JX560 / JX500 - JX510
2.7-in. (6.9 cm),
cm), 230k-dot color LCD monitor; frame coverage approx. 96%
Frame size 1,280 × 720, 640 × 480, 320 × 240; 30 fps; monaural sound
Arabic, Bulgarian, Simplified Chinese, Traditional Chinese, Czech, Danish, Dutch, English, Farsi,
Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Kazakh,
Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian,
Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
Input/output terminals
A/V OUT
NTSC or PAL output with monaural sound
(audio/video output)
Digital input/output
USB 1.1 Full-Speed; shares A/V OUT connector; MTP/PTP
Power supply/other
Power supply
NP-45A/NP-45B rechargeable battery
Battery life (approximate
Battery type
Approximate number of frames
number of frames that can
NP-45A/NP-45B (type supplied with camera)
170
be taken with a fully-charged
battery)
CIPA standard, measured in B (auto) mode using battery supplied with camera and SD memory card.
Note: Number of shots that can be taken with battery varies with battery charge level and will
Note:
decline at low temperatures.
102
Appendix
Specifications
Power supply/other
Charging time
Approx. 120 minutes (+20 °C/+68 °F)
Dimensions (W × H × D) FinePix JX580 - JX590 / JX520 - JX540
94.0 mm × 56.6 mm × 21.4 mm/3.7 in. × 2.2 in. × 0.8 in.,
excluding projections (minimum depth 19.4 mm/0.7 in.)
FinePix JX550 - JX560 / JX500 - JX510
94.0 mm × 56.6 mm × 21.3 mm/3.7 in. × 2.2 in. × 0.8 in.,
excluding projections (minimum depth 19.3 mm/0.7 in.)
Shooting weight
FinePix JX580 - JX590 / JX520 - JX540
Approx. 120 g/4.2 oz., including battery and memory card
FinePix JX550 - JX560 / JX500 - JX510
Approx. 113 g/3.9 oz., including battery and memory card
Weight
FinePix JX580 - JX590 / JX520 - JX540
Approx. 104 g/3.6 oz., excluding battery, accessories, and memory card
FinePix JX550 - JX560 / JX500 - JX510
Approx. 97 g/3.4 oz., excluding battery, accessories, and memory card
Operating conditions
• Temperature
Temperature:: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity
Humidity:: 10 % – 80 % (no condensation)
NP-45A/NP-45B rechargeable battery
Nominal voltage
DC 3.7 V
Nominal capacity
720 mAh
Operating temperature 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.5 in. × 0.2 in.
Weight
Approx. 15.5 g/0.5 oz.
Appendix
103
Specifications
AC power adapter
Rated input
Input capacity
Rated output
Operating temperature
Weight
100 V–240 V AC, 50/60 Hz
• 100 VV:: 10 VA
5.0 V DC, 1000 mA
0 °C – +40 °C/+32 °F – +104 °F
Approx. 42 g/1.5 oz., excluding battery
• 240 V:
V: 20 VA
Weight and dimensions may vary with the country or region of sale.
■ Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for
damages resulting from errors in this manual.
• Although the LCD monitor is manufactured using advanced high-precision technology, small bright points and anomalous colors may appear, particularly in the vicinity
of text. This is normal for this type of LCD monitor and does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,
electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images.
This is normal.
104
Appendix
Memo
105
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Please contact your local distributor for repairs and technical support. (see Worldwide
Network list)
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
QB
Option
AUTO
N
O
P
K
L
M
P
b OFF
N
b ON
h
F
H
F
✔
✔
✔
✔ ✔
✔ ✔
✔
✔
✔2
✔2
✔
✔
✔
✔
d
N
O
T
AUTO
3200
1600
800
400
200
100
O
P
Q
FINE
NORMAL
✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
L
✔
✔1
✔
✔
✔1 ✔
✔
✔1
✔
✔
✔ ✔
✔ ✔ ✔
✔ ✔
✔ ✔ ✔1
C D
Shooting Mode
Y K M r N OHPQR S U V WF
✔1 ✔
✔ ✔ ✔1
✔
✔ ✔ ✔
✔
✔ ✔
✔1
✔1
✔ ✔ ✔ ✔1 ✔ ✔ ✔
✔1 ✔
✔
✔ ✔ ✔1
✔
✔ ✔ ✔
✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔1
1
1
1
1
1
1
1
1
1
1
1
1
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔
✔ ✔
✔ ✔3 ✔ ✔
✔
✔ ✔
✔ ✔1 ✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Restrictions on Camera Settings
QB
Option
P
c
a
b
✔ ✔
✔
✔ ✔
ON
OFF
ON
OFF
r
x
✔ ✔
✔ ✔
✔1 ✔
✔
✔
✔
D
R
b
F
P
F ((F
F mode)
h1280
W
f
g
E
M
L
m
D
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Shooting Mode
L Y K M r N OHPQR S U
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔1
✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔1 ✔1 ✔1 ✔ ✔ ✔1 ✔ ✔ ✔ ✔
✔1 ✔1 ✔1 ✔1
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
C D
V WF
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔1 ✔1
✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔
✔
✔ ✔ ✔
✔ ✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
✔
✔
✔ ✔ ✔
✔
✔ ✔ ✔ ✔
1 Automatically optimized for selected shooting mode.
2 The camera automatically analyzes and selects macro mode ON/OFF.
3 Aspect ratio fixed at 4 : 3.
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔