Epson 8100 Projector User Manual

Projector
8100
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
 Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
Contents
Contents

About this manual. . . . . . . . . . . 1
Contents. . . . . . . . . . . . . . . . . . 2
Projector features. . . . . . . . . . . 3
Preparations. . . . . . . . . . . . . . . 3
Contents of package. . . . . . . . . . . . . . 3
Part names. . . . . . . . . . . . . . . . 4
Projector. . . . . . . . . . . . . . . . . . . . . . . 4
Control buttons. . . . . . . . . . . . . . . . . . 5
Ports. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote control. . . . . . . . . . . . . . . . . . 6
Setting up. . . . . . . . . . . . . . . . . 7
Arrangement. . . . . . . . . . . . . . . . . . . . 7
Connecting with your devices. . . . . . 10
Connecting with a power supply. . . . 12
Using the security bar and slot. . . . . 13
Using the cable cover. . . . . . . . . . . . 13
Remote control. . . . . . . . . . . . 14
Preparing for the remote control. . . . 14
Changing the frequency of remote control signal. . 15
Using as a simple PC mouse & keyboard. . 15
Power on/off . . . . . . . . . . . . . . 16
Turning on the power . . . . . . . . . . . . 16
Turn off the power. . . . . . . . . . . . . . . 17
Operating . . . . . . . . . . . . . . . . 18
Adjusting the volume. . . . . . . . . . . . . 18
Temporarily muting the sound. . . . . . 18
Selecting an input signal. . . . . . . . . . 18
Searching an input signal. . . . . . . . . 19
Selecting an aspect ratio. . . . . . . . . . 19
Adjusting the projection position. . . . 20
Adjusting the zoom. . . . . . . . . . . . . . 20
Adjusting the picture position . . . . . . 20
Adjusting the focus. . . . . . . . . . . . . . 21
Using the automatic adjustment feature . . 21
Correcting the keystone distortions . . 22
Using the magnify feature. . . . . . . . . 22
Freezing the screen . . . . . . . . . . . . . 23
Temporarily blanking the screen. . . . 23
Using the menu function. . . . . . . . . . 24
EASY MENU. . . . . . . . . . . . . . . 26
Aspect, D-zoom, Keystone ,
Picture mode, Brightness, Contrast,
Color, Tint, Sharpness, Whisper,
Mirror, Reset, Filter time,
Language, Go to Advanced Menu...

PICTURE Menu . . . . . . . . . . . . 28
Brightness, Contrast, Gamma,
Color temp, Color, Tint,
Sharpness, My memory
IMAGE Menu. . . . . . . . . . . . . . 31
Aspect, Over scan, V position,
H position, H phase, H size,
Auto adjust execute
INPUT Menu . . . . . . . . . . . . . . 33
Progressive, Video nr, Color space,
Component, Video format, Frame lock,
Computer in, Resolution
SETUP Menu. . . . . . . . . . . . . . 36
D-zoom, D-shift v, D-shift h,
Keystone , Whisper, Mirror,
Volume, Speaker, Audio
SCREEN Menu. . . . . . . . . . . . . 38
Language, Menu position, Blank,
Start up, MyScreen, MyScreen Lock,
Message, Source name
OPTION Menu. . . . . . . . . . . . . 42
Auto search, Auto on, Auto off,
Lamp time, Filter time, My button,
Service, Security
NETWORK Menu. . . . . . . . . . . 55
Setup, Projector name, e-shot,
Information, Service
C.C. (Closed Caption) Menu. . 60
Display, Mode, Channel
Maintenance. . . . . . . . . . . . . . 61
Replacing the lamp. . . . . . . . . . . . . . 61
Maintaining the air-filter. . . . . . . . . . . 63
Replacing the clock battery. . . . . . . . 65
Caring for the mirror and lens. . . . . . 66
Other care. . . . . . . . . . . . . . . . . . . . . 67
Troubleshooting . . . . . . . . . . . 68
Related messages . . . . . . . . . . . . . . 68
Regarding the indicator lamps . . . . . 69
Shutting the projector down . . . . . . . 70
Resetting all settings. . . . . . . . . . . . . 70
Phenomena that may be easy
to be mistaken for machine defects. . . 71
Specifications. . . . . . . . . . . . . 74
Projector features / Preparations
Projector features
This product realizes the large projection image of various image signals, even if
in a small space. This product can offer you convenience and various uses by the
following features.
ü T
he unique lens and mirror system realizes ultra short distance projection,
which gives you more various way of use.
ü The motorized lens door offers you very simple use of the projector.
ü This projector can be controlled and monitored via LAN connection.
Preparations
Contents of package
Please see the “Checking the contents” section in the User’s Manual (concise)
which is a book. Your projector should come with the items shown there. Contact
immediately your dealer if anything is missing.
NOTE • Keep the original packing materials, for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
Part names
Part names
Projector
(1) Control buttons
(See the following page.)
(2) Lamp cover (&61)
(3) Remote sensors (&14)
(4) Speaker (&37)
(5) Exhaust vents
(6) Lens door (&16, 66)
(7) Ports (&5, 10)
(8) AC inlet (&12)
(9) Power switch (&16)
(10) Security bar (&13)
(11) Intake vents
(12) Filter unit (&63)
(13) Elevator feet (&20)
(14) Battery cover (&65)
(15) Internal threads
These are threads for optional
mounting accessories.
(16) Lens (&16, 66)
(17) Mirror (&16, 66)
(1)
(6)
(2)
(7)
(3)
(8)
(4)
(9)
(5)
(12)
(10)
(11)
(5)
(13)
(15)
(14)
(13)
(16)
(6)
(17)
(6)
WARNING ►Be careful not to pinch your finger with the lens door, to
prevent an injury.
►Never look into the projection lens or mirror while the projection lamp lights,
since the projection lamp ray may cause a trouble on your eyes.
CAUTION ►Do not touch the lamp cover or approach the exhaust vents
while using the projector and for a while after use, to prevent a burn.
►Do not cover, block, or plug up the vents to keep normal ventilation. Do not
place anything that can stick or be sucked to the vents, around the intake vents.
Part names
Control buttons
(1) LAMP indicator (&69)
(2) TEMP indicator (&69)
(3) POWER indicator (&16, 17, 69)
(4) STANDBY/ON button (&16, 17)
(5) INPUT button (&18)
(6) FOCUS +/- buttons
when no menu is displayed (&21), or
Cursor ◄, ► buttons
when a menu is displayed (&24).
(7) MENU buttons
when no menu is displayed (&24), or
Cursor ▲, ▼ buttons
when a menu is displayed (&24).
Ports
(1)
(2)
(3)
LAMP
TEMP
POWER
STANDBY/ON
(4)
INPUT
(5)
(6)
MENU
FOCUS -
(7)
+ FOCUS
(&10, Technical's 3 to 6)
(1) Shutdown switch
(2) MONITOR OUT port
(3) Y, CB/PB, CR/PR
(Component video) ports
(4) COMPUTER IN2 port
(5) COMPUTER IN1 port
(6) LAN port
(7) CONTROL port
(1)
(8) USB port (&15)
(9) VIDEO port
(10) AUDIO IN3 (L,R) ports (&37)
(11) AUDIO OUT port
(12) AUDIO IN1 port (&37)
(13) AUDIO IN2 port (&37)
(14) S-VIDEO port
(15) Security slot (&13)
(2)
(3) (4)
(5)
COMPUTER IN2
MONITOR OUT
COMPUTER IN1
1
(7)
(8)
(6)
CONTROL
USB
S-VIDEO
Y
VIDEO
CB/PB CR/PR
L
2
AUDIO IN
R
(10)
(11)
AUDIO
OUT
(12)
(13)
(14)
AUDIO IN3
(9)
LAN
(15)
Part names
Remote control
(1) STANDBY/ON button (&16, 17)
(2) VIDEO button (&19)
(3) COMPUTER button (&18)
(4) SEARCH button (&19)
(5) ASPECT button (&19)
(6) AUTO button (&21)
(7) BLANK button (&23)
(8) MAGNIFY ON button (&22)
(9) MAGNIFY OFF button (&15, 22)
(10) HOME button (&15)
(11) END button (&15)
(12) PAGE UP button (&15)
(13) PAGE DOWN button (&15)
(14) VOLUME button (&18)
(15) MUTE button (&15, 18)
(16) FREEZE button (&23)
(17) MY BUTTON 1 button (&44)
(18) MY BUTTON 2 button (&44)
(19) KEYSTONE button (&22)
(20) FOCUS – button (&21)
(21) FOCUS + button (&21)
(22) D-ZOOM – button (&20)
(23) D-ZOOM + button (&20)
(24) POSITION button (&20, 22, 24)
(25) MENU button (&24)
(26) Cursor ▲/▼/◄/► buttons (&24, 25)
(27) ENTER button (&24, 25)
(28) ESC button (&24, 25)
(29) RESET button (&24, 25)
(30) Battery cover (&14)
(3)
(2)
(5)
(10)
(8)
(9)
(11)
(16)
(17)
(20)
(21)
(24)
(26)
(28)
VIDEO
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
FOCUS
MY BUTTON
1
+
-
POSITION
2
KEYSTONE
D-ZOOM
+
MENU
ENTER
ESC
RESET
(30)
Back of
the remote control
(4)
(1)
(6)
(7)
(12)
(14)
(15)
(13)
(19)
(18)
(23)
(22)
(25)
(27)
(29)
Setting up
Setting up
Arrangement
Install the projector in a stable, cool, dry and airy place, keeping a space of 30 cm
or more between the sides of the projector and other objects such as walls.
Refer to the following to decide the projection style. Ceiling mount and tabletop
use must be setup with the designated optional accessories. Ask your dealer for
details.
(3) Ceiling mount
(2) Tabletop use
Mirror protector
Tabletop use feet
(1) Usual use
NOTE • When installing the projector, confirm that there is nothing that blocks
the projection light between the projector and the screen.
• When installing the projector, check that the remote sensors are not exposed
to any strong ray (14).
CAUTION ►The designated optional accessory for the tabletop use
contains the tabletop use feet and mirror protector. Please see the manual
enclosed with the accessory.
• The tabletop use feet must be used for the tabletop use, otherwise the projector
can't stand or falls down broken.
• The mirror protector must be used to protect the lens door when the projector
falls to the table.
Setting up
Arrangement (continued)
Refer to the following for the projection distance.
The values shown in the table are calculated for a full size screen: 1024x768.
Table for 4:3 screen
(1)
A
A
C2
C1
B1
(2)
B2
B2
C2
C1
B1
B2
inch
cm
inch
cm
inch
48 * 0.5 *(0.2) 38.3
15
50
2.0
1 39.8
16
60
9.6
4 47.4
19
70 17.2
7 55.0
22
80 24.8
10 62.6
25
90 32.4
13 70.2
28
100 39.9
16 77.7
31
120 55.0
22 92.8
37
150 77.7
31 115.5
45
200 115.5
45 153.3
60
(±8%)
C1
cm
inch
24.4
10
25.2
10
28.9
11
32.6
13
36.2
14
39.9
16
43.6
17
50.9
20
62.0
24
80.4
32
Table for 16:9 screen
A
A
(3)
B1
C1
A
*
B1
C2
B2
B1
B2
C2
cm
inch
98.2
39
101.9
40
120.4
47
139.3
55
158.2
62
177.1
70
196.0
77
234.0
92
291.0
115
385.7
152
(±8%)
C1
inch
cm
inch
cm
inch
cm
inch
44 * 0.5 *(0.2) 38.3
15 33.6
13
50
5.4
2 43.2
17 37.3
15
60 13.7
5 51.5
20 43.5
17
70 22.0
9 59.8
24 49.6
20
80 30.2
12 68.0
27 55.7
22
90 38.5
15 76.3
30 61.8
24
100 46.6
18 84.4
33 67.9
27
120 63.1
25 100.9
40 80.1
32
150 87.8
35 125.6
49 98.4
39
200 129.0
51 166.8
66 129.0
51
C2
cm
inch
88.9
35
99.9
39
118.3
47
136.8
54
155.3
61
173.9
68
192.3
76
229.5
90
285.3
112
378.2
149
NOTE • It is recommended to adjust the screen size from 60 inch to 100 inch
diagonal. The screen image adjusted out of this range, either smaller or larger,
may be deteriorated.
• The screen position may be shifted after installation if the projector is
suspended on a ceiling or somewhere, since the body of this projector is made
of plastics. If readjustment is necessary, consult with your dealer or installater.
Setting up
Arrangement (continued)
WARNING ►Place the projector in a stable horizontal position. If the
projector falls or is knocked over it could cause injury and/or damage to the
projector. Using a damaged projector could then result in fire and/or electric
shock.
• Do not place the projector on an unstable, slanted or vibrational surface such
as a wobbly or inclined stand.
• Do not place the projector on its side or front position. To place the projector
on its rear position for the table top use, it is required to use the designated
optional parts. Consult with your dealer.
• Consult with your dealer before a special installation such as suspending from
a ceiling or somewhere else.
►Place the projector in a cool place, and ensure that there is sufficient
ventilation. The high temperature of the projector could cause fire, burns and/or
malfunction of the projector.
• Do not stop-up, block or cover the projector's vents.
• Keep a space of 30 cm or more around the projector from other objects such
as walls.
• Do not place the projector on metallic thing or anything weak in heat.
• Do not place the projector on carpet, cushions or bedding.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place anything near the lens door, lens, mirror, vents. or on the top of
the projector.
• Do not place anything that may be sucked into or stick to the vents on the rear
and bottom of the projector. This projector has some intake vents on the rear
and bottom.
►Do not place the projector anyplace where it may get wet. Getting the projector
wet or inserting liquid into the projector could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector in a bathroom or the outdoors.
• Do not place anything containing liquid near the projector.
CAUTION ►Avoid placing the projector in smoky, humid or dusty place.
Placing the projector in such places could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector near humidifiers, smoking spaces or a kitchen.
►Position the projector to prevent light from directly hitting the projector's remote
sensor.
Setting up
Connecting with your devices
Before connecting them, make sure that the devices are suitable to connect with
this projector, and prepare the required signal cables and adapters. Consult your
dealer if the accessory that is not included in this product is required. Refer to the
following for connection. If you want to use the cable cover, see the Using the
cable cover (13).
PCs
USB-A
RS-232C
RGB OUT
AUDIO
OUT
AUDIO
OUT
RGB OUT
LAN
AUDIO IN
Monitor
RGB IN
COMPUTER IN2
MONITOR OUT
COMPUTER IN1
1
CONTROL
USB
S-VIDEO
Y
CB/PB CR/PR
VIDEO
L
2
AUDIO IN
LAN
AUDIO
OUT
Speakers
(with an amplifier)
R
AUDIO IN3
Y
CB/PB CR/PR
COMPONENT VIDEO OUT
L
R
AUDO OUT
VIDEO
OUT
L
R
AUDO OUT
S-VIDEO
OUT
L
R
AUDO OUT
VCR/DVD
players
WARNING ►Use only the accessories contained in this product or
recommended by your dealer. Do not modify the projector or accessories.
►For the cable with a ferrite core only at one end, connect the end with the core
to the projector. The cables may be required a specific length or a ferrite core by
the regulations.
►Be careful not to damage the cables. Route the cables so that they are not
likely to be walked on or pinched by items placed upon or against them.
CAUTION ►Do not connect or disconnect the projector with devices while
they are connected to a power supply, except for the cases directed by the
manuals.
►Be careful not to set a connector into a wrong port or with a wrong way.
(continued on next page)
10
Setting up
Connecting your devices (continued)
NOTE • Be sure to read the manuals for devices before connecting them to the
projector, and make sure that all the devices are suitable to be connected with this
product. Before connecting to a PC, check the signal level, the signal timing, and the
resolution.
- Be sure to consult to the administrator of the network. Do not connect LAN port to any
network that might have the excessive voltage.
- Some signal may need an adapter to input this projector.
- Some PCs have multiple screen display modes that may include some signals which
are not supported by this projector.
- Although the projector can display signals with resolution up to UXGA (1600X1200),
the signal will be converted to the projector’s panel resolution before being displayed.
The best display performance will be achieved if the resolutions of the input signal and
the projector panel are identical.
• While connecting, make sure that the shape of the cable's connector fits the port to
connect with. And be sure to tighten the screws on connectors with screws.
• When connecting a laptop PC to the projector, be sure to activate the PC’s external
RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT
display.) For details on how this is done, please refer to the instruction manual of the
corresponding laptop PC.
• When the picture resolution is changed on a PC depending on an input, automatic
adjustment function may take some time and may not be completed. In this case,
you may not be able to see a check box to select “Yes/No” for the new resolution on
Windows. Then the resolution will go back to the original. It might be recommended to
use other CRT or LCD monitors to change the resolution.
• In some cases, this projector may not display a proper picture or display any picture on
screen. For example, automatic adjustment may not function correctly with some input
signals. An input signal of composite sync or sync on G may confuse this projector, so
the projector may not display a proper picture.
About Plug-and-Play capability
Plug-and-Play is a system composed of a PC, its operating system and peripheral
equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-andPlay can be used by connecting this projector to a PC that is VESA DDC (display data
channel) compatible.
• Take advantage of this feature by connecting an RGB cable to the COMPUTER IN1
port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of
connection is attempted.
• Please use the standard drivers in your PC as this projector is a Plug-and-Play monitor.
11
Setting up
Connecting with a power supply
Before connection, confirm that the power
outlet is suitable for this projector and the
power cord.
Then follow the procedure below for
connection.
AC Inlet
the end of the power cord with the
1. Insert
socket into the AC inlet of the projector.
the other end of the power cord into
2. Plug
a power outlet.
Power cord
(with the socket)
WARNING ►Be careful of operation for a power supply not to cause an
electric shock or a fire.
• Do not handle the power cord with the wet hand.
• Use this product with only the type of power supply indicated on the projector.
• Use a power outlet that is close to the projector and easily accessible.
• Connect firmly the power cord not to result in loose connection. Do not use a
loose or unsound power outlet.
• Do not overload the outlet, since overloading can result in a risk of fire or
electric shock.
• Use only the power cord contained in this product unless it is damaged. If it is
damaged, consult your dealer to get new one. Do not modify the power cord.
12
Setting up
Using the security bar and slot
This projector has the security bar for a
commercial anti-theft chain or wire up to 10
mm in diameter, and also the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
NOTE • These are not provided as
comprehensive theft preventions but
supplemental measures.
Security slot
Security bar
WARNING ►Do not place the anti-theft chain or wire near the projector’s
exhaust vents, since the chain or wire heated by the hot exhaust gas may cause
a burn.
►Do not use the security bar or slot for the purpose of fall prevention, since
these are not designed for it.
Using the cable cover
Utilize the cable cover as the guard and blind for the connecting parts.
the signal cables and the
1. Connect
power cord to the projector first.
Cable cover
the cable cover to the
2. Attach
projector, uniting the interlocking
parts.
the screw to fix the cable
3. Tighten
cover.
the other ends of the
4. Connect
cables to other devices, and plug
the power cord to the power outlet.
Screw
Interlocking parts
Screw driver
CAUTION ►Be careful not to pinch the cables in the cable cover, to
prevent damage to the cables.
13
Remote control
Remote control
Preparing for the remote control
The accessory remote control needs batteries. Use the
batteries included in this product or two new batteries of
the specified type: HITACHI MAXELL, part number LR6
or R6P. Follow the following procedure.
the battery cover in the back of the remote
1. Remove
control.
the batteries into the battery holder, according to
2. Put
the polarity markings (+) and (-) inside the holder.
3. Put the battery cover back to the former state.
NOTE • Try changing the batteries when the
remote control malfunctions.
• This remote control works with the remote
sensors on the projector using infrared light
(Class 1 LED). The active sensor senses the
remote control signal assigned within 60 degrees
to right and left, and within 3 meters.
• The remote control signal reflected in the
screen or the like may be available.
• Prevent the remote sensors from being hit by
a strong ray. It may cause malfunction of the
projector and remote control.
Remote sensors
30º 30º
3m
(approx.)
WARNING ►Be careful of handling a battery, as a battery can cause explosion,
cracking or leakage, which could result in a fire, an injury, and environment pollution.
• Use only the specified and new battery. Do not use a battery with damage, such
as a scratch, a dent, rust or leakage. Do not mix a new battery with used one.
• When a battery leaked, wipe the leakage out well with a waste cloth. If the
leakage adhered to your body, immediately rinse it well with water. When a battery
leaked in the battery holder, replace the batteries after wiping the leakage out.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Do not work on a battery; for example recharging or soldering.
• Do not keep the batteries put into the remote control when the remote control
is not used for a long while. Keep a battery in a dark, cool and dry place. Never
expose a battery to a fire or water.
• Obey the local laws on disposing a battery.
14
Remote control
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control
does not function properly, attempt to change the signal frequency.
In order to set the Mode, please keep pressing the combination of
two buttons listed below simultaneously for about 3 seconds.
(2)
(1) Set to Mode 1:NORMAL... MUTE and RESET buttons
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE item of
the OPTION Menu (46) of the projector to be controlled should be
set to the same mode as the remote control.
VIDEO
COMPUTER
SEARCH
ASPECT
MAGNIFY
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
MY BUTTON
1
FOCUS
+
KEYSTONE
2
D-ZOOM
-
POSITION
(1)
+
MENU
ENTER
ESC
RESET
Using as a simple PC mouse & keyboard
The accessory remote control works as a simple mouse
and keyboard of the PC, when the projector's USB port
(B type) connects with the PC's USB port (A type) port
via a mouse cable.
(1) HOME key: Press HOME button.
(2) END key: Press END button.
(3) PAGE UP key: Press PAGE UP button.
(4) PAGE DOWN key: Press PAGE DOWN button.
(5) Mouse left button: Press ENTER button.
(6) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.
(7) ESC key: Press ESC button.
(8) Mouse right button: Press RESET button.
WARNING ►Improper use of the simple mouse &
keyboard function could damage your equipment. While
using this function, please connect this product only
to a PC. Be sure to check your PC’s manuals before
connecting this product to the PC.
USB port
USB
VIDEO
(1)
MAGNIFY
(2)
COMPUTER
ASPECT
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
(5)
SEARCH
FOCUS
MY BUTTON
1
+
-
POSITION
2
ESC
(4)
KEYSTONE
D-ZOOM
+
MENU
ENTER
(7)
(3)
(6)
RESET
(8)
NOTE • When the simple mouse & keyboard function of this product does not work
correctly, please check the following.
- When a USB cable connects this projector with a PC having a built-in pointing device
(e.g. track ball) like a notebook PC, open BIOS setup menu, then select the external
mouse and disable the built-in pointing device, because the built-in pointing device may
have priority to this function.
- Windows 95 OSR 2.1 or higher is required for this function. And also this function may
not work depending on the PC’s configurations and mouse drivers.
- You cannot do things like press two buttons at once (for instance, pressing two buttons
at the same time to move the mouse pointer diagonally).
- This function is activated only when the projector is working properly. This function is
not available while the lamp is warming up (the POWER indicator blinks green), and
while adjusting the volume and display, correcting for keystone, magnifying the screen,
using the BLANK function, or displaying the menu screen.
15
Power on/off
Power on/off
Turning on the power
Turn on the projector and the connected devices. Turn on the projector ahead of
other connected devices, unless mentioned in the manuals.
For this projector, follow the procedure below.
the side marked " I " of the power
1. Press
switch, as the power-on position.
The POWER indicator lights up in orange.
● For a couple of seconds after the POWER
indicator lights up, wait to use the control
buttons (on the projector and remote control).
The buttons may not work soon.
POWER indicator
STANDBY/ON button
LAMP
TEMP
POWER
STANDBY/ON
INPUT
that there is nothing that the lens
2. Confirm
door hits while opening.
Then, press the STANDBY/ON button (on
the projector or remote control).
The lens door opens, the projection lamp
lights up, and the POWER indicator begins to
blink green.
Power
switch
When the projector starts completely, the indicator
STANDBY/ON button
will turn steady green.
To display the picture, select an input signal according to the section “Selecting an
input signal” (18).
NOTE • When the AUTO ON of the OPTION Menu is set to the TURN ON,
and the power was turned off by the power switch last time, turning the power
switch on makes the projection lamp light on without pushing the STANDBY/
ON button (42).
WARNING ►Never look into the projection lens or mirror while the projection
lamp lights, since the projection lamp ray may cause a trouble on your eyes.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
CAUTION ►Be careful not to pinch your finger with the lens door, as it may
cause an injury.
16
Power on/off
Turn off the power
Turn the projector off after turning off the other connected devices, unless
mentioned in the manuals. For this projector, follow the procedure below.
the STANDBY/ON button (on the
1. Press
projector or remote control).
The “Power off?” dialog appears on the
screen for about 5 seconds.
that there is nothing that the lens
2. Confirm
door hits while closing.
Then press the STANDBY/ON button again
while the message appears.
The projection lamp goes off, the lens door
closes, and the POWER indicator begins to
blink orange.
● For cooling the projector down, wait for the
POWER indicator to stop blinking and turn
steady orange.
The projector can be turned off without
waiting for cooling down. However, the
manufacture recommends cooling the
projector down enough.
Do not turn the projector on for about 10
minutes or more after turning it off to prevent
shortening its life.
POWER indicator
STANDBY/ON button
LAMP
TEMP
POWER
STANDBY/ON
INPUT
Power
switch
STANDBY/ON button
the side marked " " of the power switch, as the power-off position.
3. Press
The POWER indicator goes off.
When you will not use the projector for a long while, unplug and separate the
power cord from the power outlet, for safety purposes.
NOTE • Use the shutdown switch (70) only when the projector is not turned
off by normal procedure.
• Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
CAUTION ►Be careful not to pinch your finger with the lens door, to
prevent an injury.
►Do not touch the lamp cover or approach the exhaust vents while using the
projector and for a while after use, to prevent a burn.
17
Operating
Operating
VOLUME button
Adjusting the volume
1.
the ▲/▼ cursor buttons to adjust the volume.
2. Use
To close the dialog and complete the operation, press the VOLUME
VIDEO
Press VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the volume.
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
button again. Even if you do not do anything, the dialog will
automatically disappear after a few seconds.
-
MY BUTTON
1
FOCUS
+
-
2
KEYSTONE
D-ZOOM
POSITION
●W
hen is selected for current picture input port, the volume adjustment
is disable. Please see AUDIO item of SETUP Menu (37).
Temporarily muting the sound
1.
COMPUTER
ASPECT
+
MENU
ENTER
ESC
RESET
▲/▼ button
Press MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
To restore the sound, press the MUTE or VOLUME button. Even if you do
not do anything, the dialog will automatically disappear after a few seconds.
●W
hen is selected for current picture input port, the sound is always
muted. Please see AUDIO item of SETUP Menu (37).
● When is selected to VIDEO, S-VIDEO or COMPONENT port, the
C.C. (Closed Caption) is automatically activated if the C.C. is set to
AUTO in the DISPLAY of the C.C. Menu and the input signal from the
port supports the C.C. feature (60).
MUTE button
VIDEO
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
MY BUTTON
1
FOCUS
+
-
2
KEYSTONE
D-ZOOM
POSITION
+
MENU
ENTER
Selecting an input signal
ESC
INPUT button on the projector.
1. Press
Each time you press the button, the projector switches its input
RESET
INPUT button
port from the current port as below.
INPUT
COMPUTER IN 1  COMPUTER IN 2
VIDEO S-VIDEO COMPONENT (Y, CB/PB, CR/PR)

MENU

● While TURN ON is selected for AUTO SEARCH item in OPTION
Menu (42), the projector will keep checking the ports in above order
repeatedly till an input signal is detected.
COMPUTER button on the remote control.
1. Press
Each time you press the button, the projector switches its input
COMPUTER button
port from the current port as below.
COMPUTER IN 1
COMPUTER IN 2
● While TURN ON is selected for AUTO SEARCH item in OPTION
Menu, the projector will keep checking every port sequentially till an
input signal is detected (42). If COMPUTER button is pushed when
VIDEO, S-VIDEO or COMPONENT port is selected, the projector will
check COMPUTER IN1 port first.
VIDEO
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
FOCUS
MY BUTTON
1
+
-
POSITION
(continued on next page)
2
KEYSTONE
D-ZOOM
+
MENU
ENTER
ESC
18
COMPUTER
ASPECT
RESET
Operating
Selecting an input signal (continued)
VIDEO button
VIDEO button on the remote control.
1. Press
Each time you press the button, the projector switches its input
VIDEO
port from the current port as below.
COMPUTER
ASPECT
MAGNIFY
COMPONENT (Y, CB/PB, CR/PR)  S-VIDEO  VIDEO
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
MY BUTTON
1
FOCUS
+
-
2
KEYSTONE
D-ZOOM
+
● While TURN ON is selected for AUTO SEARCH item in OPTION Menu, the projector
will keep checking every port sequentially till an input signal is detected (42). If
VIDEO button is pushed when COMPUTER IN1 or COMPUTER IN2 port is selected,
the projector will check COMPONENT port first.
POSITION
MENU
ENTER
ESC
RESET
Searching an input signal
SEARCH button on the remote control.
1. Press
The projector will start to check its input ports as below in order to
SEARCH button
find any input signals.
When an input is found, the projector will stop searching and
display the image. If no signal is found, the projector will return to
the state selected before the operation.
VIDEO
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
COMPUTER IN 1  COMPUTER IN 2
VIDEO S-VIDEO COMPONENT (Y, CB/PB, CR/PR)
FREEZE

-
MY BUTTON
1
FOCUS
+
-
2
KEYSTONE
D-ZOOM

POSITION
+
MENU
● While TURN ON is selected for AUTO SEARCH item in OPTION Menu (42), the
projector will keep checking the ports in above order repeatedly till an input signal is
detected.
ENTER
ESC
Selecting an aspect ratio
1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the mode
for aspect ratio in turn.
RESET
ASPECT button
 For a computer signal
NORMAL  4:3  16:9
VIDEO
COMPUTER
ASPECT
MAGNIFY
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
F
or a video signal, s-video signal or component video signal
4:3  16:9  14:9
SEARCH
-
FOCUS
MY BUTTON
1
+
-
POSITION
2
KEYSTONE
D-ZOOM
+
MENU
ENTER
ESC
RESET
 For no signal
4:3 (fixed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
19
Operating
Adjusting the projection position
This projector has four elevator feet in the bottom. Use them to adjust the
projection position.
UTER
UTER
IN2
IN1
COMP
LAN
1
AUDIO
OUT
COMP
UTER
OUT
EO
S-VID
COMP
AUDIO
USB
ROL
CONT
2
IN
R
CR/P
B
CB/P
R
Y
L
IN3
VIDEO AUDIO
max. 43 mm
Elevator feet
CAUTION ►Do not lengthen the elevator feet to 43 mm or more. The foot
lengthened exceeding the limit may come off from the projector, and result in an injury.
►Tilt the projector with these elevating feet only.
►Do not tilt the projector over 5 degrees, when it is suspended from a ceiling or
somewhere.
Adjusting the zoom
VIDEO
COMPUTER
ASPECT
Press the D-ZOOM + or D-ZOOM – button on the remote
control to display D-ZOOM dialog on screen.
Use the D-ZOOM + and D-ZOOM – buttons to adjust the
picture size.
To finish the operation, do not touch these buttons for a few
seconds until the dialog is disappeared.
● If you want to expand a part of the image, use the magnify
function (22).
MAGNIFY
0
BLANK
HOME
PAGE UP
END
PAGE DOWN
VOLUME
ON
MUTE
OFF
FREEZE
-
MY BUTTON
1
FOCUS
+
-
2
KEYSTONE
D-ZOOM
POSITION
+
MENU
ENTER
ESC
RESET
D-ZOOM – button
Adjusting the picture position
● This is a function to shift the position of the shrunken picture
by the zoom function.
● The function is not available, if any menu is displayed on
screen.
● The function is not available, if the D-ZOOM is adjusted to
100 (full screen) on its dialog.
AUTO
D-ZOOM + button
VIDEO
Press the POSITION button on the remote control while no
menu is on screen, to display the D-SHIFT dialog on screen.
Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
Press the POSITION button again to finish this operation.
SEARCH
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
FOCUS
MY BUTTON
1
+
-
POSITION
2
KEYSTONE
D-ZOOM
+
MENU
ENTER
ESC
RESET
POSITION button
Operating
Adjusting the focus
VIDEO
COMPUTER
SEARCH
ASPECT
Press the FOCUS + or FOCUS – button on the remote control,
or FOCUS + or FOCUS – button on the projector while no
menu is on screen, to display the FOCUS box on screen.
Use the FOCUS + and FOCUS – buttons to adjust the screen
focus. After the focus adjustment, wait for a while until the
FOCUS box is disappeared, if you want to display any other
menu on screen by pushing the MENU button on the projector.
AUTO
BLANK
FOCUS + button
MAGNIFY
HOME
PAGE UP
END
PAGE DOWN
VOLUME
ON
MUTE
OFF
FREEZE
-
MY BUTTON
1
FOCUS
+
KEYSTONE
2
D-ZOOM
-
POSITION
+
MENU
ENTER
ESC
RESET
FOCUS – button
Using the automatic adjustment feature
AUTO button on the remote control.
1. Press
Pressing this button performs the following.
F
or a computer signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its maximum
size prior to attempting to use this feature. A dark picture
may still be incorrectly adjusted. Use a bright picture when
adjusting.
AUTO button
VIDEO
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
FOCUS
MY BUTTON
1
+
-
POSITION
2
KEYSTONE
D-ZOOM
+
MENU
ENTER
F
or a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT Menu (34). The vertical position
and horizontal position will be automatically set to the default.
ESC
RESET
 For a component video signal
The vertical position, horizontal position and horizontal phase will be
automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input. When this
function is performed for a video signal, a certain extra such as a line may
appear outside a picture.
● The items adjusted by this function may vary when the FINE or DISABLE is
selected for the AUTO ADJUST item of the SERVICE item in the OPTION
Menu (45).
21
Operating
Correcting the keystone distortions
VIDEO
KEYSTONE button on the remote
1. Press
control. A dialog will appear on the screen
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
to aid you in correcting the distortion.
2.
COMPUTER
KEYSTONE button
FREEZE
-
Use the ▲/▼ cursor buttons to adjust the
keystone correction.
MY BUTTON
1
FOCUS
+
-
2
KEYSTONE
D-ZOOM
POSITION
+
MENU
ENTER
ESC
RESET
To close the dialog and complete this operation, press KEYSTONE button
again. Even if you do not do anything, the dialog will automatically disappear
after a few seconds.
● The adjustable range of this correction will vary among inputs. For some
input, this function may not work well.
● This function will be unavailable when Transition Detector is on (51).
Using the magnify feature
the ON button of MAGNIFY on the remote control.
1. Press
The “MAGNIFY” indication will appear on the screen and
the projector will go into the MAGNIFY mode. When the ON
button of MAGNIFY is pressed first after the projector is
started, the picture will be zoomed twice. The indication will
disappear in several seconds with no operation.
2.
MAGNIFY
ON/OFF button
VIDEO
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
FOCUS
MY BUTTON
1
2
KEYSTONE
D-ZOOM
Use the ▲/▼ cursor buttons to adjust the zoom level. The picture of video,
s-video or component video signal can be zoomed in up to 2 times, and the
one of computer signal can be zoomed in up to 4 times.
To move the zoom area, press the POSITION button in the MAGNIFY mode,
then use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the
zoom area, press the POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the
OFF button of MAGNIFY on the remote control.
-
+
-
POSITION
+
MENU
ENTER
ESC
RESET
● The projector automatically exits from the MAGNIFY mode when the input
signal is changed or when the display condition is changed.
● In the MAGNIFY mode, the keystone distortion condition may vary, it will be
restored when the projector exits from the MAGNIFY mode.
NOTE • The zoom level can be finely adjusted. Closely watch the screen to
find the level you want.
22
Operating
Freezing the screen
1.
Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen (however,
the indication will not appear when the TURN OFF is selected
for the MESSAGE item in the SCREEN Menu (41)), and
the projector will go into the FREEZE mode, which the picture
is frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
FREEZE button
VIDEO
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
MY BUTTON
1
FOCUS
+
-
2
KEYSTONE
D-ZOOM
POSITION
+
MENU
ENTER
● The projector automatically exits from the FREEZE mode when one of the
projector’s buttons or remote control buttons of STANDBY/ON, SEARCH,
COMPUTER, VIDEO, BLANK, AUTO, VOLUME, MUTE, KEYSTONE,
MENU, MAGNIFY and MY BUTTON1/2 (except MY MEMORY or PICTURE
MODE is assigned to) (44) is pressed.
● If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
ESC
RESET
Temporarily blanking the screen
BLANK button on the remote control.
1. Press
The BLANK screen will be displayed instead of the screen of
input signal. Please refer to BLANK item in SCREEN Menu
(38).
To exit from the BLANK screen and return to the input signal
screen, press BLANK button again.
● The projector automatically returns to the input signal screen
when one of the projector’s buttons or the remote control
buttons (except ASPECT, POSITION, MAGNIFY or FREEZE
button, also except MY BUTTON1/2 if MY MEMORY or
PICTURE MODE is assigned to (44)) is pressed.
BLANK button
VIDEO
COMPUTER
ASPECT
MAGNIFY
SEARCH
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
ON
MUTE
OFF
FREEZE
-
FOCUS
MY BUTTON
1
+
-
POSITION
2
KEYSTONE
D-ZOOM
+
MENU
ENTER
ESC
RESET
NOTE • The sound is not connected with the BLANK screen function.
If necessary, set the volume or mute first.
• If you want to make the screen blank and the sound muted at the same time,
use AV Mute function that is required to be assigned to one of the MY BUTTON
on the remote in advance (44).
23
Operating
Using the menu function
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, NETWORK, C.C. and
EASY MENU.
EASY MENU consists of functions often used, and the other menus are classified
into each purpose and brought together as the Advanced Menu.
Each of these menus is operated using the same methods. The basic operations
of these menus are as follows.
VIDEO
COMPUTER
SEARCH
ASPECT
MAGNIFY
AUTO
BLANK
HOME
PAGE UP
VOLUME
END
PAGE DOWN
MUTE
ON
OFF
FREEZE
FOCUS
-
TEMP
MENU button
MY BUTTON
1
2
KEYSTONE
ENTER button MENU button
Cursor buttons
LAMP
POWER
+
-
D-ZOOM
POSITION
+
MENU
STANDBY/ON
ENTER
ESC
INPUT
RESET
ESC button
RESET button
ME
LU
AU
TO
TE
VO
TO
NE
MU
YS
KE
E DO
PAG
+
2
ME
NU
M
OO
TT
ON
D-Z
BU
1
-
T
SE
+
S
RE
CU
ION
ES
C
PO
SIT
EN
TE
R
FO
+ FOCUS
-
FOCUS -
MY
AUDIO
OUT
ZE
1
2
IN
EE
LAN
Y
IN1
AUDIO
D
TER
S-VIDEO
EN
COMPU
MAG
NIF
IN2
R
CR/P
B
CB/P
R
Y
L
IN3
VIDEO AUDIO
ON
TER
OUT
OFF
TER
USB
FR
COMPU
COMPU
OL
CONTR
AS
PE
HO
CT
ME
VID
WN
EO
PA
GE
CO
UP
MP
UT
ER
SE
AR
CH
BL
AN
K
MENU
the MENU button on the remote control or the projector.
1. Press
The Advanced Menu or EASY MENU, which has priority just after powered
on will appear.
If you want to move the menu position, use the cursor buttons after pressing
the POSITION button. While the projector is displaying any menu, the MENU
button on the projector works as the cursor buttons.
In the EASY MENU
you want to change it to the Advanced Menu,
2. Ifselect
the Go to Advanced Menu...
the ▲/▼ cursor buttons to select an item to
3. Use
operate.
4. Use the ◄/► cursor buttons to operate the item.
EASY MENU
(continued on next page)
24
Operating
Using the menu function (continued)
In the Advanced Menu
the ▲/▼ cursor buttons to select a menu.
2. Use
If you want to change it to the EASY MENU, select
EASY MENU.
Then press the ► cursor button, or ENTER button to
select an item. The lower layer menu of the selected
item will appear.
Advanced Menu
the ▲/▼ cursor buttons to select an item to operate.
3. Use
Then press the ► cursor button, or ENTER button to progress. The operation
menu of the selected item will appear.
4. Use the ▲/▼ cursor buttons to operate the item.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
● When you want to reset the operation, press RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE, H
PHASE, VOLUME) cannot be reset.
● In the Advanced Menu, when you want to return to the previous display, press
the ◄ cursor button or ESC button on the remote control.
MENU button on the remote control again to close the menu and
5. Press
complete this operation. Even if you do not do anything, the dialog will
automatically disappear after about 10 seconds.
25
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons. Then
perform it according to the following table.
Item
Description
ASPECT
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE Menu (31).
D-ZOOM
Using the ◄/► buttons adjusts the zoom.
See the D-ZOOM item in SETUP Menu (36).
KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
See KEYSTONE
item in SETUP Menu (36).
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
DAYTIME ó WHITEBOARD ó BOARD(GREEN)
PICTURE MODE
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME
COLOR TEMP
#2 MID DEFAULT
#3 LOW DEFAULT
#1 HIGH DEFAULT
#4 Hi-BRIGHT-1 DEFAULT
#5 Hi-BRIGHT-2 DEFAULT
#2 MID DEFAULT
#6 Hi-BRIGHT-3 DEFAULT
GAMMA
#1 DEFAULT
#2 DEFAULT
#3 DEFAULT
#4 DEFAULT
#4 DEFAULT
#5 DEFAULT
#6 DEFAULT
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to GAMMA (28) and
COLOR TEMP (29) items in PICTURE Menu.
• When this function is performed, a certain extra such as a line
may appear.
(continued on next page)
26
EASY MENU
EASY MENU (continued)
Item
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
WHISPER
MIRROR
RESET
Description
Using the ◄/► buttons adjusts the brightness.
See BRIGHTNESS item in PICTURE Menu (28).
Using the ◄/► buttons adjusts the contrast.
See CONTRAST item in PICTURE Menu (28).
Using the ◄/► buttons adjusts the strength of whole color.
See COLOR item in PICTURE Menu (29).
Using the ◄/► buttons adjusts the tint.
See TINT item in PICTURE Menu (29).
Using the ◄/► buttons adjusts the sharpness.
See SHARPNESS item in PICTURE Menu (30).
Using the ◄/► buttons turns off/on the whisper mode.
See WHISPER item in SETUP Menu (36).
Using the ◄/► buttons switches the mode for mirror status.
See MIRROR item in SETUP Menu (36).
Performing this item resets all of EASY MENU items except FILTER
TIME and LANGUAGE.
Pressing the RESET button or the ► button displays a dialog. To
reset, select RESET using the ▲ button performs resetting.
FILTER TIME
The usage time of the air-filter is shown in the menu.
Performing this item resets the filter time which counts usage time
of the air-filter.
Pressing the RESET button or the ► button displays a dialog. To
reset the filter time, select RESET using the ▲ button performs
resetting.
See FILTER TIME item in OPTION Menu (43).
LANGUAGE
Using the ◄/► buttons changes the display language.
See LANGUAGE item in SCREEN Menu (38).
Go to
Advanced Menu...
Select Go to Advanced Menu… on the menu, and press the ►
or ENTER button to use the menu of PICTURE, IMAGE, INPUT,
SETUP, SCREEN, OPTION, NETWORK or C.C..
27
PICTURE Menu
PICTURE Menu
From the PICTURE Menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the
item. Then perform it according to the following table.
Item
BRIGHTNESS
CONTRAST
Description
Using the ▲/▼ buttons adjusts the brightness.
Light ó Dark
Using the ▲/▼ buttons adjusts the contrast.
Strong ó Weak
Using the ▲/▼ buttons switches the gamma mode.
#1 DEFAULT � #1 CUSTOM � #2 DEFAULT � #2 CUSTOM
�
�
#3 DEFAULT
#6 CUSTOM
�
�
#3 CUSTOM
#6 DEFAULT
�
�
#5 CUSTOM � #5 DEFAULT � #4 CUSTOM � #4 DEFAULT
To adjust CUSTOM
GAMMA
Selecting a mode whose name includes
CUSTOM and then pressing the ► button
or the ENTER button displays a dialog to
aid you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the ◄/► buttons, and
adjust the level using the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as below.
No pattern ð Gray scale of 9 steps
Ramp  Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the test
pattern (Gray scale of 9 steps), except the darkest in the left end.
If you want to adjust the 2nd tone from left end on the test pattern
use the equalizing adjustment bar “1”. The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• When this function is performed, lines or other distortion may appear.
(continued on next page)
28
PICTURE Menu
PICTURE Menu (continued)
Item
Description
Using the ▲/▼ buttons switches the color temperature mode.
#1 HIGH DEFAULT � #1 HIGH CUSTOM � #2 MID DEFAULT
�
�
#2 MID CUSTOM
#6 Hi-BRIGHT-3 CUSTOM
�
�
#3 LOW DEFAULT
#6 Hi-BRIGHT-3 DEFAULT
�
�
#3 LOW CUSTOM
#5 Hi-BRIGHT-2 CUSTOM
�
�
#5 Hi-BRIGHT-2 DEFAULT � #4 Hi-BRIGHT-1 CUSTOM � #4 Hi-BRIGHT-1 DEFAULT
To adjust CUSTOM
COLOR TEMP
Selecting a mode whose name includes
CUSTOM and then pressing the ► button or the
ENTER button displays a dialog to aid you in
adjusting the OFFSET and GAIN of the selected
mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern ð Gray scale of 9 steps
Ramp  Gray scale of 15 steps
• When this function is performed, lines or other distortion may
appear.
COLOR
Using the ▲/▼ buttons adjusts the strength of whole color.
Strong ó Weak
• This item can be selected only for a video signal, s-video, or
component video signal.
TINT
Using the ▲/▼ buttons adjusts the tint.
Greenish ó Reddish
• This item can be selected only for a video signal, s-video, or
component video signal.
(continued on next page)
29
PICTURE Menu
PICTURE Menu (continued)
Item
SHARPNESS
Description
Using the ▲/▼ buttons adjusts the sharpness.
Strong ó Weak
• There may be some noise and/or the screen may flicker for a
moment when an adjustment is made. This is not a malfunction.
This projector has 4 memories for adjustment data (for all the items
of PICTURE Menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or
ENTER button performs each function.
LOAD-1 ó LOAD-2 ó LOAD-3 ó LOAD-4
MY MEMORY
30
SAVE-4 óSAVE-3 ó SAVE-2 ó SAVE-1
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may flicker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using MY BUTTONs. Please
see MY BUTTON item in OPTION Menu (44).
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data being stored of a memory will be
lost by saving a new data into the memory.
IMAGE Menu
IMAGE Menu
From the IMAGE Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the item.
Then perform it according to the following table.
Item
Description
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL ó 4:3 ó 16:9
ASPECT
For a Video signal, S-video signal or Component video signal
4:3 ó 16:9 ó 14:9
For no signal
4:3 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
OVER SCAN
Using the ▲/▼ buttons adjusts the over-scan ratio.
Large (It reduces picture) ó Small (It magnifies picture)
• This item can be selected only for a video, s-video and component
video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
V POSITION
Using the ▲/▼ buttons adjusts the vertical position.
Up ó Down
• Over-adjusting the vertical position may cause noise to appear
on the screen. If this occurs please reset the vertical position to the
default setting.
Pressing RESET button when V POSITION is selected will reset V
POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends
on OVER SCAN (above) setting. It is not possible to adjust when
OVER SCAN is set to 10.
(continued on next page)
31
IMAGE Menu
IMAGE Menu (continued)
Item
Description
H POSITION
Using the ▲/▼ buttons adjusts the horizontal position.
Left ó Right
• Over-adjusting the horizontal position may cause noise to appear
on the screen. If this occurs please reset the horizontal position to
the default setting. Pressing RESET button when H POSITION is
selected will reset H POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends on
OVER SCAN (31) setting. It is not possible to adjust when OVER
SCAN is set to 10.
H PHASE
Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
Right ó Left
• This item can be selected only for a computer signal or component
video signal.
H SIZE
Using the ▲/▼ buttons adjusts the horizontal size.
Large ó Small
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment by
pressing the RESET button during this operation.
Executing this item performs the automatic adjustment feature.
For a computer signal
The vertical position, the horizontal position and the horizontal
phase (31, 32) will be automatically adjusted. Make sure that the
application window is set to its maximum size prior to attempting to
use this feature. A dark picture may still be incorrectly adjusted. Use
a bright picture when adjusting.
AUTO ADJUST
EXECUTE
32
For a video signal and s-video signal
The video format best suited for the respective input signal will
be selected automatically. This function is available only when
the AUTO is selected for the VIDEO FORMAT item in the INPUT
Menu (34). The vertical position and horizontal position will be
automatically set to the default.
For a component video signal
The vertical position, horizontal position and horizontal phase will
be automatically set to the default.
• The automatic adjustment operation requires approx. 10 seconds.
Also please note that it may not function correctly with some input.
When this function is performed for a video signal, a certain extra
such as a line may appear outside a picture.
• The items adjusted by this function may vary when the FINE or
DISABLE is selected for the AUTO ADJUST item of the SERVICE
item in the OPTION Menu (45).
INPUT Menu
INPUT Menu
From the INPUT Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to execute
the item. Then perform it according to the following
table.
Item
Description
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó TURN OFF
PROGRESSIVE
• This function is performed only for an interlaced signal at the
VIDEO or S-VIDEO input, and for 525i (480i) or 625i(576i) signal at
the COMPONENT VIDEO input.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH ó MID ó LOW
VIDEO NR
• This function is performed only for the VIDEO or S-VIDEO input,
and for 525i (480i) or 625i(576i) signal at the COMPONENT VIDEO
input.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the ▲/▼ buttons switches the mode for color space.
AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
COLOR SPACE
COMPONENT
• This item can be selected only for a computer signal or component
video signal except SCART RGB signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Using the ▲/▼ buttons switches the function of the COMPONENT
(Y, CB/PB, CR/PR) port.
COMPONENT ó SCART RGB
When the SCART RGB is selected, COMPONENT (Y, CB/PB, CR/
PR) and VIDEO ports will function as a SCART RGB port. A SCART
cable is required for a SCART RGB input to the projector. For your
reference, see the TECHNICAL part.
(continued on next page)
33
INPUT Menu
INPUT Menu (continued)
Item
Description
VIDEO FORMAT
The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2) Using the ▲/▼ buttons switches the mode
for video format.
AUTO ó NTSC ó PAL ó SECAM
N-PAL ó M-PAL ó NTSC4.43
• This item is performed only for a video signal
from VIDEO port or S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
FRAME LOCK
Set the frame lock function on/off for each port.
(1) Using the ▲/▼ buttons to select one of
following ports.
COMPUTER (IN)1 ó COMPUTER (IN)2
(2) Using the ◄/► buttons to turns the
frame lock function on/off.
TURN ON ó TURN OFF
• This item can be performed only on a signal with a vertical
frequency of 50 to 60 Hz.
• When the TURN ON is selected, a moving pictures are displayed
more smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select TURN OFF.
COMPUTER IN
The computer input signal type for COMPUTER IN1 and IN2 ports
can be set.
(1) Use the ◄/► buttons to select the input
port to be set.
COMPUTER (IN)1 ó COMPUTER (IN)2
(2) Use the ▲/▼ buttons to select the
computer input signal type.
SYNC ON G ON ó SYNC ON G OFF
Selecting SYNC ON G ON allows reception of sync on G signal.
• When SYNC ON G ON is selected, the picture may be distorted
with certain input signals. In such a case, remove the signal
connector first and select SYNC ON G OFF on the menu, and then
reconnect the signal.
(continued on next page)
34
INPUT Menu
INPUT Menu (continued)
Item
Description
The resolution for the COMPUTER IN1 and IN2 input signals can
be set on this projector.
(1) In the INPUT Menu select the RESOLUTION using the ▲/▼
buttons and press the ► button.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu, select
the resolution you wish to display using
the ▲/▼ buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
(3) STANDARD
Pressing the ► or ENTER button when
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and
horizontal size and automatically select
an aspect ratio.
RESOLUTION
STANDARD
↓
(3) CUSTOM
(3)-1 To set a custom resolution use the
CUSTOM
▲/▼ buttons to select the CUSTOM
↓
and the CUSTOM RESOLUTION
box will be displayed. Set the
horizontal (HORZ) and vertical
(VERT) resolutions using the ▲/▼
/◄/► buttons. It is not guaranteed
to work this function properly on any
resolutions.
(3)-2 To save the setting place the
cursor on the right-most digit and
press the ► button.
The horizontal and vertical positions,
clock phase and horizontal size will
be automatically adjusted.
(3)-3 To revert back to the previous
resolution without saving changes
place the cursor on the left-most
digit and press the ◄ button.
The screen will then return to the
RESOLUTION menu displaying the
previous resolution.
• For some pictures, this function may not work well.
35
SETUP Menu
SETUP Menu
From the SETUP Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or the ENTER button to execute the
item. Then perform it according to the following table.
Item
D-ZOOM
Description
Using the ▲/▼ buttons adjusts the zoom.
Large ó Small
D-SHIFT V
Using the ▲/▼ buttons adjusts the vertical picture position.
Up ó Down
• The function is not available, if the D-ZOOM is adjusted to 100 (full
screen) on its dialog.
D-SHIFT H
Using the ▲/▼ buttons adjusts the horizontal picture position.
Right ó Left
• The function is not available, if the D-ZOOM is adjusted to 100 (full
screen) on its dialog.
KEYSTONE
WHISPER
Using the ▲/▼ buttons corrects the vertical keystone distortion.
Shrink the top of the image ó Shrink the bottom of the image
• The adjustable range of this function will vary with the type of input
signal. For some input, this function may not work well.
• This function will be unavailable when the Transition Detector is
on (51).
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When WHISPER is selected, acoustic noise and screen brightness
are reduced.
Using the ▲/▼ buttons switches the mode for mirror status.
MIRROR
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (51) will be displayed when
projector is restarted after the power switch is turned off.
VOLUME
Using the ▲/▼ buttons adjusts the volume.
High ó Low
(continued on next page)
36
SETUP Menu
SETUP Menu (continued)
Item
SPEAKER
Description
Using the ▲/▼ buttons turns on/off the built-in speaker.
TURN ON ó TURN OFF
When TURN OFF is selected, the built-in speaker does not work.
Allocates the audio ports.
(1) Choose a picture input port using the
▲/▼ buttons.
QUIT ó COMPUTER (IN)1 ó COMPUTER (IN)2
AUDIO
VIDEO ó S-VIDEO ó COMPONENT
(2) Select the audio port to be interlocked
with the input port using the ◄/►
buttons.
1ó2ó3ó
• When is selected for an input, the audio will not be output if the
input is chosen as a display source.
• When is selected to VIDEO, S-VIDEO or COMPONENT port,
the C.C.(Closed Caption) is automatically activated, if the C.C. is
set to AUTO in the DISPLAY menu of the C.C. Menu and the signal
from the input port supports the C.C. feature (60).
37
SCREEN Menu
SCREEN Menu
From the SCREEN Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the item.
Then perform it according to the following table.
Item
Description
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
LANGUAGE
MENU POSITION
ENGLISH � FRANÇAIS � DEUTSCH � ESPAÑOL � ITALIANO
�
�
TÜRKÇE
NORSK
�
�
POLSKI
NEDERLANDS
�
�
SUOMI
PORTUGUÊS
�
�
РУССКИЙ � SVENSKA � 뼑鞵 � 㐕储Ё᭛ � ㅔԧЁ᭛ � ᣣᧄ⺆
Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press MENU button on the remote control or
keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the BLANK screen.
The BLANK screen is a screen for the temporarily blanking feature
(23). It is displayed by pressing BLANK button.
MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK
BLANK
MyScreen
ORIGINAL
BLUE, WHITE,
BLACK
Feature
Screen can be registered by the MyScreen item
(40).
Screen preset as the standard screen.
Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the plain black screen after several minutes.
(continued on next page)
38
SCREEN Menu
SCREEN Menu (continued)
Item
Description
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF
MyScreen
START UP
ORIGINAL
TURN OFF
Feature
Screen can be registered by the MyScreen item
(40).
Screen preset as the standard screen.
Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (38) after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the TURN ON is selected to the MyScreen PASSWORD of
SECURITY item in OPTION Menu (48), the START UP is fixed to
MyScreen.
(continued on next page)
39
SCREEN Menu
SCREEN Menu (continued)
Item
Description
MyScreen
This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
1. Selecting this item displays a dialog
titled “MyScreen”. It will ask you if
you start capturing an image from
the current screen.
Please wait for the target image to be displayed, and press the
ENTER button when the image is displayed. The image will
freeze and the frame for capturing will appear.
To stop performing, press the RESET or ESC button.
2. Using the ▲/▼/◄/► buttons adjusts
the frame position.
Please move the frame to the position
of the image which you want to use.
The frame may not be able to be
moved for some input signals.
To start registration, press the ENTER
button.
To restore the screen and return to
the previous dialog, press the RESET
or ESC button.
Registration takes several minutes.
When the registration is completed, the registered screen and
the following message are displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.”
• This function cannot be selected when the TURN ON is selected
to the MyScreen Lock item (below).
• This function cannot be selected when TURN ON is selected to
the MyScreen PASSWORD of SECURITY item in OPTION Menu
(48).
MyScreen Lock
Using the ▲/▼ buttons turns on/off the MyScreen lock function.
TURN ON ó TURN OFF
When the TURN ON is selected, the MyScreen item is locked. Use
this function for protecting the current MyScreen.
• This function cannot be selected when TURN ON is selected to
the MyScreen PASSWORD of SECURITY item in OPTION Menu
(48).
(continued on next page)
40
SCREEN Menu
SCREEN Menu (continued)
Item
Description
MESSAGE
Using the ▲/▼ buttons turns on/off the message function.
TURN ON ó TURN OFF
When the TURN ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“Searching…” while searching for the input
“Detecting…” while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while the projector is in the FREEZE mode.
• If the projector goes into the FREEZE mode while the TURN OFF
is selected, the picture on screen is frozen without any messages,
which is not a malfunction (23).
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN Menu to
select SOURCE NAME and press the ► button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be named
and press the ► button. Right side of the
menu is blank until a name is specified.
The SOURCE NAME dialog will be displayed.
(3) The current name will be displayed on the
first line. Use the ▲/▼/◄/► buttons and the
ENTER or INPUT button to select and enter
characters. The RESET button can be used
to erase 1 character at a time. Also if you
move the cursor to DELETE or ALL CLEAR on
screen and push the ENTER or INPUT button,
1 character or all characters will be erased. The
name can be a maximum of 16 characters.
(4) To change an already inserted character,
press the (▲) button to move the cursor to the
first line, and use the ◄/► buttons to move
the cursor on the character to be changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (3) above.
(5) To finish entering text, move the cursor to the SAVE on screen
and press the ENTER or INPUT button. To revert to the previous
name without saving changes, move the cursor to the CANCEL on
screen and press the ENTER or INPUT button.
41
OPTION Menu
OPTION Menu
From the OPTION Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the item,
except for the items LAMP TIME and FILTER TIME. Then
perform it according to the following table.
Item
AUTO SEARCH
Description
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON  TURN OFF
When the TURN ON is selected, detecting no signal automatically
cycles through input ports in the following order. The search is
started from the current port. Then when an input is found, the
projector will stop searching and display the image.
COMPUTER IN1  COMPUTER IN2
VIDEO  S-VIDEO  COMPONENT
AUTO ON
Using the ▲/▼ buttons turns on/off the AUTO ON function.
TURN ON  TURN OFF
When set to the TURN ON, the lamp in projector will be
automatically turned on without the usual procedure (16), only
when the projector is supplied with the power after the power was
cut while the lamp was on.
• This function does not work as long as the power has been
supplied to the projector while the lamp is off.
• After turning the lamp on by the AUTO ON function, if neither input
nor operation is detected for about 30 minutes, the projector is
turned off, even though the AUTO OFF function (43) is disabled.
(continued on next page)
42
OPTION Menu
OPTION Menu (continued)
Item
Description
Using the ▲/▼ buttons adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
AUTO OFF
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted to the CONTROL port during the corresponding time,
projector will not be turned off.
Please refer to the section “Turning off the power” (17).
LAMP TIME
The lamp time is the usage time of the lamp, counted after the last
resetting. It is shown in the OPTION Menu.
Pressing RESET button or the ► button displays a dialog.
To reset the lamp time, select RESET using the ▲ button.
RESET ï CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Replacing the lamp"
(61).
FILTER TIME
The filter time is the usage time of the air-filter, counted after the
last resetting. It is shown in the OPTION Menu.
Pressing the RESET button or the ► button displays a dialog.
To reset the filter time, select the RESET using the ▲ button.
RESET ï CANCEL
• Please reset the filter time only when you have cleaned or replaced
the air-filter, for a suitable indication about the air-filter.
• For the air-filter cleaning, see the section "Maintaining the air-filter"
(63).
(continued on next page)
43
OPTION Menu
OPTION Menu (continued)
Item
Description
This item is to assign one of the following functions to MY BUTTON 1 and 2
on the remote control (6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then
using the ▲/▼ buttons sets one of the following functions to the chosen
button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT (Y, CB/PB, CR/PR)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays the INPUT -INFORMATION- (46) or NETWORK
-INFORMATION- (59) or nothing.
The displayed dialog is switched as below every time the MY BUTTON is
pushed.
When an input signal is found:
INPUT -INFORMATION-  NETWORK -INFORMATION-  OFF
MY BUTTON
SERVICE
When an input signal is not found:
NETWORK -INFORMATION-  OFF
• MY MEMORY: Loads one of adjustment data stored (30).
When more than one data are saved, the adjustment changes every time
the MY BUTTON is pushed.
When no data is saved in memory, the dialog
"No saved data" appears.
When the current adjustment is not saved
to memory, the dialog as shown in the right
appears.
If you want to keep the current adjustment, please press the ◄ button to
quit. Otherwise loading a data will lose the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (26).
• FILTER RESET: Displays the filter time reset confirmation dialogue (43).
• VOLUME+: Set the volume up.
• VOLUME-: Set the volume down.
• AV MUTE: Turns the picture and audio on/off.
• e-SHOT: Displays the e-SHOT menu (58).
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or the
ENTER button to execute the item.
FAN SPEED  AUTO ADJUST  GHOST  FILTER MESSAGE  KEY LOCK  FOCUS LOCK
FACTORY RESET  I NFORMATION  REMOTE FREQ.  REMOTE RECEIV.
(continued on next page)
44
OPTION Menu
OPTION Menu (continued)
Item
Description
FAN SPEED
Using the ▲/▼ buttons the rotation speed of the
cooling fans. The HIGH is the mode for use at
highlands etc. Note that the projector is noisier when
the HIGH is selected.
HIGH ó NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode.
When the DISABLE is selected, the H/V.POSITION,
H.SIZE and H.PHASE will be set to the default value
if the automatic adjustment function is executed.
FINE ó FAST ó DISABLE
FINE: Finer tuning including H.SIZE adjustment.
FAST: F
aster tuning, setting H.SIZE to prearranged data for the
input signal.
• Depending on conditions, such as input image, signal cable to
the projector, environment around the projector, etc., the automatic
adjustment may not work correctly. In such a case, please
choose DISABLE to disable the automatic adjustment, and make
adjustment manually.
SERVICE
(continued)
GHOST
1. Select a color element of ghost using the ◄/►
buttons.
2. Adjust the selected element using the ▲/▼ buttons to
disappear ghost.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for the interval to
show the message for cleaning up the air-filter.
50h ó 100h ó 200h ó 300h ó 400h ó 500h
TURN OFF ó 800h ó 700h ó 600h
After choosing an item except TURN OFF, the
message “REMINDER *** HRS PASSED AFTER THE
LAST FILTER CHECK” will appear after the timer
reaches the interval time set by this feature (68).
When the TURN OFF is chosen, the message will not appear.
Utilize this feature to keep the air-filter clean, setting the suitable
time according to your environment of this projector.
• Please check and clean the air-filter periodically, even if there is no
message. If the air-filter becomes to be blocked by dust or others,
the internal temperature will rise, which could cause malfunction, or
reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector
and the condition of the air-filter.
(continued on next page)
45
OPTION Menu
OPTION Menu (continued)
Item
Description
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When
TURN ON is selected, the buttons on the projector except the
STANDBY/ON button are locked.
TURN ON ó TURN OFF
• Please use to avoid a mischief and touching accidentally. This
function does not have any effect on the remote control.
FOCUS LOCK
Use the ▲/▼ buttons turns on/off the focus lock feature. When
TURN ON is selected, the FOCUS +/- buttons on the remote and
projector are disabled.
TURN ON ó TURN OFF
• Please use the function to avoid a mischief and touching accidentally.
REMOTE RECEIV.
(1) Select a remote sensor using ▲/▼ buttons.
1:FRONT ó 2:TOP
(2) Switch it using the ENTER or INPUT button.
(off) ó (on)
• A sensor cannot be turned off when the other one is off. Always at
least one sensor is on.
SERVICE
(continued)
REMOTE FREQ.
Use the ▲/▼ button to change the projector's remote sensor setting.
1:NORMAL ó 2:HIGH
Items with a checkmark are on. The factory
default setting is for both 1:NORMAL and 2:HIGH
to be on. If the remote control does not function
correctly set this to either only 1 or only 2 (15).
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled “INPUT -INFORMATION-”.
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock
function is working (34).
• This item can't be selected for no signal and sync out.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By
this function, all the items in all of menus will collectively return to
the initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE, SECURITY and NETWORK settings are not reset.
RESET ï CANCEL
46
(continued on next page)
OPTION Menu
OPTION Menu (continued)
Item
Description
This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1 Use the ▲/▼ buttons on the OPTION
Menu to select SECURITY and press the
► button. The ENTER PASSWORD box
will be displayed.
The factory default PASSWORD is 4910.
This PASSWORD can be changed (1.2 Changing the PASSWORD
(below)).
• It is strongly recommended the factory default PASSWORD to be
changed as soon as possible.
SECURITY
1.1-2 Use the ▲/▼/◄/► buttons to enter
the registered PASSWORD. Move the
cursor to the right side of the ENTER
PASSWORD box and press the ► button
to display the SECURITY menu.
If an incorrect PASSWORD is input the
ENTER PASSWORD box will be displayed again. If incorrect
PASSWORD is input 3 times the projector will turn off. Afterwards the
projector will turn off every time an incorrect PASSWORD is input.
1.2 Changing the PASSWORD
1.2-1 Use the ▲/▼ buttons on the SECURITY
menu to select SECURITY PASSWORD
CHANGE and press the ► button to display
the ENTER NEW PASSWORD box.
1.2-2 Use the ▲/▼/◄/► buttons to enter the new PASSWORD.
1.2-3 Move the cursor to the right side of the
ENTER NEW PASSWORD box and
press the ► button to display the NEW
PASSWORD AGAIN box, enter the same
PASSWORD again.
1.2-4 Move the cursor to the right side of the NEW
PASSWORD AGAIN box and press the ►
button and the NOTE NEW PASSWORD
box will be displayed for about 20 seconds,
please make note of the PASSWORD
during this time.
Pressing the ENTER button will close the NOTE NEW PASSWORD
box.
• Please do not forget your PASSWORD.
(continued on next page)
47
OPTION Menu
OPTION Menu (continued)
Item
Description
1.3 If you have forgotten your PASSWORD
1.3-1 Follow the procedure in 1.1-1 to display the
ENTER PASSWORD box.
1.3-2 While the ENTER PASSWORD box is
displayed, press and hold the RESET
button for about 3 seconds or press and
hold the INPUT and ► buttons on the
projector for about 3 seconds.
The 10-digit Inquiring Code will be displayed.
• If there is no key input for about 55 seconds while the Inquiring Code is
displayed the menu will close. If necessary repeat the process from 1.3-1.
1.3-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD
will be sent after your user registration information is confirmed.
2. Using the MyScreen PASSWORD Function
SECURITY
(continued)
The MyScreen PASSWORD function can be used to prohibit access to the
MyScreen function and prevent the currently registered MyScreen image
from being overwritten.
2.1 Turning on the MyScreen PASSWORD Function
2.1-1 Use the ▲/▼ buttons on the SECURITY
menu to select MyScreen PASSWORD
and press the ► button to display the
MyScreen PASSWORD on/off menu.
2.2 Setting the PASSWORD
2.2-1 Display the MyScreen PASSWORD on/off menu using the procedure
in 2.1-1.
2.2-2 Use the ▲/▼ buttons on the MyScreen
PASSWORD on/off menu to select TURN ON.
The ENTER PASSWORD box (small) will be
displayed.
2.2-3 Use the ▲/▼/◄/► buttons to enter the
PASSWORD.
Move the cursor to the right side of the ENTER
PASSWORD box (small) and press the ►
button to display the PASSWORD AGAIN box,
enter the same PASSWORD again.
(continued on next page)
48
OPTION Menu
OPTION Menu (continued)
Item
Description
2.2-4 Move the cursor to the right side of the
PASSWORD AGAIN box and press the
► button to display the PASSWORD for
about 20 seconds, please make note of the
PASSWORD during this time.
Pressing the ENTER button will return to
MyScreen PASSWORD on/off menu.
When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock menu will be unavailable.
• The START UP setting will be locked on MyScreen (and the menu will
be unavailable).
Turning the MyScreen PASSWORD off will allow normal operation of
these functions.
• Please do not forget your MyScreen PASSWORD.
2.3 Turning the PASSWORD off
2.3-1 Follow the procedure in 2.1-1 to display the MyScreen PASSWORD
on/off menu.
SECURITY
(continued)
2.3-2 Select TURN OFF to display the ENTER PASSWORD box (large).
Enter the registered PASSWORD and the screen will return to the
MyScreen on/off menu.
If an incorrect PASSWORD is input the menu will close. If necessary
repeat the process from 2.3-1.
2.4 If you have forgotten your PASSWORD
2.4-1 Follow the procedure in 2.1-1 to display the MyScreen PASSWORD
on/off menu.
2.4-2 Select TURN OFF to display the ENTER
PASSWORD box (large). The 10-digit
Inquiring Code will be displayed inside the
box.
2.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD
will be sent after your user registration information is confirmed.
3. Using the PIN LOCK Function
PIN LOCK is a function which prevents the projector from being used unless
a registered Code is input.
3.1 Registering the PIN Code
3.1-1 Use the ▲/▼ buttons on the SECURITY menu
to select PIN LOCK and press the ► button
or the ENTER button to display the PIN LOCK
on/off menu.
(continued on next page)
49
OPTION Menu
OPTION Menu (continued)
Item
Description
3.1-2 Use the ▲/▼ buttons on the PIN LOCK
on/off menu to select TURN ON and the
PIN BOX will be displayed.
SECURITY
(continued)
3.1-3 Input a 4 part PIN Code using the ▲, ▼,
◄, ►, COMPUTER and INPUT buttons.
A PIN Code again box will appear. Reenter
the same PIN Code. This will complete the
PIN Code registration.
• If there is no key input for about 55 seconds while the PIN BOX or the
PIN Code again box are displayed the menu will close. If necessary
repeat the process from 3.1-1.
Afterwards, anytime the projector is restarted after AC power is turned off
the PIN BOX will be displayed. Enter the registered PIN Code.
The projector can be used after entering the registered PIN Code. If an
incorrect PIN Code is input the PIN BOX will be displayed again.
If an incorrect PIN Code is input 3 times the projector will turn off.
Afterwards the projector will turn off every time an incorrect PIN Code is
input. The projector will also turn off if there is no key input for about 5
minutes while the PIN BOX is displayed.
This function will activate only when the projector is started after AC
power is turned off.
• Please do not forget your PIN Code.
3.2 Turning Off the PIN LOCK Function
3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu.
Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be
displayed.
Enter the registered PIN Code to turn the PIN LOCK function off.
If an incorrect PASSWORD is input 3 times, the projector will be shut
down.
3.3 If you have forgotten your PIN Code
3.3-1 While the PIN BOX is displayed, press and
hold the RESET button for 3 seconds or
press and hold the INPUT and ► buttons
for 3 seconds. The 10-digit Inquiring Code
will be displayed.
• If it passes for about 5 minutes after the PIN BOX is displayed the
projector will turn off.
3.3-2 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD
will be sent after your user registration information is confirmed.
(continued on next page)
50
OPTION Menu
OPTION Menu (continued)
Item
Description
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started
to supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting
has been changed.
• Keystone adjustment feature has been prohibited as long as the Transition
Detector function is ON.
4.1 Turning On the Transition Detector Function
4.1-1 U se the ▲/▼ buttons on the SECURITY
menu to select TRANSITION DETECTOR and
press the ► or the ENTER button to display
the TRANSITION DETECTOR on/off menu.
Select TURN ON and the current angle and
mirror setting will be recorded.
• This feature may not function properly if the projector is not in a stable
position when TURN ON is selected.
SECURITY
(continued)
4.1-2 W hen the projector is turned on, if this
function is set to TURN ON and if the setting
condition of the projector (normal use or
ceiling mounted or tabletop use) or mirror
setting is changed from previous record, the
Transition Detector alarm will be displayed
and the projector will not display the input
image.
Set the Transition Detector off in the SECURITY menu to display the input
signal.
If the Transition Detector alarm is displayed for about 5 minutes the lamp
will turn off. This function will activate only when the projector is started
after turning off the AC power.
4.2 Setting the Transition Detector PASSWORD
4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select TRANSITION
DETECTOR and press the ► or the ENTER button to display the
TRANSITION DETECTOR on/off menu.
4.2-2 Use the ▲/▼ buttons on the TRANSITION
DETECTOR on/off menu to select TURN
ON. The ENTER PASSWORD box (small)
will be displayed.
4.2-3 Use the ▲/▼/◄/► buttons to enter a
PASSWORD. Move the cursor to the right
side of the ENTER PASSWORD box (small)
and press the ► button to display the
PASSWORD AGAIN box, enter the same
PASSWORD again.
(continued on next page)
51
OPTION Menu
OPTION Menu (continued)
Item
Description
4.2-4 M ove the cursor to the right side of the
PASSWORD AGAIN box and press the
► button to display the PASSWORD for
about 20 seconds, please make note of the
PASSWORD during this time.
Pressing the ENTER button will return to the TRANSITION DETECTOR
on/off menu.
• Please do not forget your Transition Detector PASSWORD.
4.3 Setting the Transition Detector off
4.3-1 Follow the procedure in 4.1-1 to display the TRANSITION DETECTOR
on/off menu.
SECURITY
(continued)
4.3-2 Select TURN OFF to display the ENTER PASSWORD box (large).
Enter the registered PASSWORD and the screen will return to the
TRANSITION DETECTOR on/off menu. If an incorrect PASSWORD is
input the menu will close. If necessary repeat the process from 4.3-1.
4.4 If you have forgotten your PASSWORD
4.4-1 Follow the procedure in 4.1-1 to display the TRANSITION DETECTOR
on/off menu.
4.4-2 Select TURN OFF to display the ENTER
PASSWORD box (large). The 10-digit
Inquiring Code will be displayed inside the
box.
4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD
will be sent after your user registration information is confirmed.
(continued on next page)
52
OPTION Menu
OPTION Menu (continued)
Item
Description
5. Using the MY TEXT PASSWORD function
This item allows you to display your own message (MY TEXT) on the START
UP screen and INPUT-INFORMATION. It can be protected by a password to
prevent it from being overwritten.
5.1 Writing the MY TEXT
SECURITY
(continued)
(1) Use the ▲/▼ buttons on the SECURITY menu
to select the MY TEXT WRITING menu and
press the ► button. The MY TEXT WRITING
dialog will be displayed.
(2) The current MY TEXT will be displayed on the first 3
lines. If not yet written, the lines will be blank.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter
characters. The RESET button can be used to erase 1 character at a time. Also if
you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER
or INPUT button, 1 character or all characters will be erased. The MY TEXT can
be input up to 24 characters on each line.
(3) To change an already inserted character, press
the ▲/▼ button to move the cursor to one of
the first 3 lines, and use the ◄/► buttons to
move the cursor on the character to be changed.
After pressing the ENTER or INPUT button, the
character is selected. Then, follow the same
procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the
SAVE on screen and press the ENTER or INPUT
button. To revert to the previous MY TEXT
without saving changes, move the cursor to the
CANCEL on screen and press the ENTER or
INPUT button.
• The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to TURN OFF.
5.2 Displaying the MY TEXT
(1) Use the ▲/▼ buttons on the SECURITY menu
to select the MY TEXT DISPLAY menu and
MY TEXT DISPLAY on/off
press the ► button to display the MY TEXT
menu
DISPLAY on/off menu.
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY
on/off menu to select on or off.
TURN ON ó TURN OFF
When it is set TURN ON, the MY TEXT will be
displayed on the START UP screen. Whichever
is selected, the MY TEXT will be displayed on the
INPUT-INFORMATION- when the INFORMATION
on the SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the TURN OFF.
(continued on next page)
53
OPTION Menu
OPTION Menu (continued)
Item
Description
5.3 Turning on the MY TEXT PASSWORD
The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten.
SECURITY
(continued)
54
5.3-1 Turning on the MY TEXT PASSWORD function
(1) Use the ▲/▼ buttons on the SECURITY menu
to select the MY TEXT PASSWORD menu and
press the ► button to display the MY TEXT
MY TEXT PASSWORD
PASSWORD on/off menu.
5.3-2 Setting the MY TEXT PASSWORD
(1) Display the MY TEXT PASSWORD on/off menu
using the procedure in 5.3-1
(2) Use the ▲/▼ buttons on the MY TEXT
ENTER PASSWORD BOX
PASSWORD menu to select TURN ON. The
(small)
ENTER PASSWORD BOX (small) will be
displayed.
(3) Use the ▲/▼/◄/► buttons to enter the
PASSWORD. Move the cursor to the right side of
the ENTER PASSWORD BOX (small) and press
the ► button to display the PASSWORD AGAIN PASSWORD AGAIN BOX
BOX, and then enter the same PASSWORD
again.
(4) Move the cursor to the right side of the
PASSWORD AGAIN BOX and press ► button to
display the PASSWORD for about 20 seconds,
then please make note of the PASSWORD
NOTE PASSWORD BOX
during this time.
Pressing the ENTER button on the remote control
or INPUT button on the projector will return to the
MY TEXT PASSWORD on/off menu. When the
PASSWORD is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit
changing the DISPLAY setting.
• The MY TEXT WRITING menu will be unavailable, which can prevent the
MY TEXT from being overwritten.
5.3-3 Turning the MY TEXT PASSWORD off
(1) Follow the procedure in 5.3-1 to display the MY
TEXT PASSWORD on/off menu.
(2) Select TURN OFF to display the ENTER
PASSWORD BOX (large). Enter the registered
ENTER PASSWORD BOX
PASSWORD and the screen will return to the
(large)
MY TEXT PASSWORD on/off menu.
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat
the process from 5.3-3(1)
5.3.4 If you have forgotten your PASSWORD.
(1) Follow the procedure in 5.3-1 to display the MY TEXT PASSWORD
on/off menu.
(2) Select TURN OFF to display the ENTER PASSWORD BOX (large). The
10 digit inquiring code will be displayed inside the box.
(3) Contact your dealer with the 10 digit inquiring code. Your PASSWORD
will be sent after your user registration information is confirmed.
NETWORK Menu
NETWORK Menu
Remember that incorrect network settings on this projector
may cause trouble on the network. Be sure to consult with
your network administrator before connecting to an existing
access point on your network.
Select “NETWORK” from the main menu to access the
following functions.
Select an item using the ▲/▼ cursor buttons on the projector or remote control,
and press the ► cursor button on the projector or remote control, or ENTER
button on the remote control to execute the item. Then perform it according to the
following table.
See the User’s Manual - Network Guide for details of NETWORK operation.
NOTE • The factory default setting for DHCP is OFF. If your network has
DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and DEFAULT
GATEWAY automatically, please set DHCP to ON. ( Network Settings of
the User’s Manual - Network Guide)
• If you are not utilizing SNTP ( Date/Time Settings of the User’s Manual
- Network Guide), then you must set the DATE AND TIME (56) during the
initial installation.
Item
Description
Selecting this item displays the SETUP Menu
for the network.
Use the ▲/▼ buttons to select an item, and
the ► or ENTER button on the remote control
to perform the item.
SETUP
Use the ▲/▼ buttons to turn DHCP on/off.
ON  OFF
Select OFF when the network does
DHCP
(Dynamic
not have DHCP enabled.
Host
• When the “DHCP” setting changes to “ON”, it takes a
Configuration
little time to obtain IP address from DHCP server.
Protocol)
• Auto IP function will be assigned an IP address if the
projector could not obtain an IP address from server
even if DHCP is “ON”.
(continued on next page)
55
NETWORK Menu
NETWORK Menu (continued)
Item
Description
Use the ▲/▼/◄/► buttons to
enter the IP ADDRESS. This
function can only be used when
DHCP is set to OFF.
IP
ADDRESS • The IP ADDRESS is the number that identifies this
projector on the network. You cannot have two devices
with the same IP ADDRESS on the same network.
• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET
MASK
SETUP
(continued)
Use the ▲/▼/◄/► buttons to
enter the same SUBNET MASK
used by your PC. This function
can only be used when DHCP is
set to OFF.
• The SUBNET MASK ”0.0.0.0” is prohibited.
Use the ▲/▼/◄/► buttons to
enter the DEFAULT GATEWAY
(a node on a computer network
DEFAULT
that serves as an access point to
GATEWAY
another network) address.
This function can only be used when DHCP is set to
OFF.
DNS
SERVER
Use the ▲/▼/◄/► buttons to
input the DNS SERVER address.
The DNS SERVER is a system
to control domain names and IP
addresses on the Network.
Use the ▲/▼ buttons to enter the
TIME DIFFERENCE.
Set the same TIME DIFFERENCE
TIME
as the one set on your PC. If
DIFFERENCE unsure, consult your IT manager.
Use the ◄ button to return to
the menu after setting the TIME
DIFFERENCE.
DATE
AND
TIME
(continued on next page)
56
Use the ▲/▼/◄/► buttons to
enter the Year (last two digits),
Month, Date, Hour and Minute.
• The projector will override this setting and retrieve
DATE AND TIME information from the Time server
when SNTP is enabled. ( Date/Time Settings of the
User’s Manual - Network Guide)
NETWORK Menu
NETWORK Menu (continued)
Item
PROJECTOR
NAME
Description
(1) Use the▲/▼ buttons on the NETWORK Menu to select the
PROJECTOR NAME menu and press the ► button. The
PROJECTOR NAME dialog will be displayed.
(2) The current PROJECTOR NAME
will be displayed on the first 3 lines.
If not yet written, the lines will be
blank.
Use the ▲/▼/◄/► buttons and
the ENTER or INPUT button to
select and enter characters. The
RESET button can be used to
erase 1 character at a time. Also if
you move the cursor to DELETE or
ALL CLEAR on screen and push
the ENTER or INPUT button, 1
character or all characters will be
erased.
The PROJECTOR NAME can be
input up to 64 characters.
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first 3
lines, and use the ◄/► buttons to
move the cursor on the character
to be changed. After pressing
the ENTER or INPUT button, the
character is selected. Then, follow
the same procedure as described at
the item (2) above.
(4) To finish entering text, move the
cursor to the SAVE on screen
and press the ENTER or INPUT
button. To revert to the previous
PROJECTOR NAME without saving
changes, move the cursor to the
CANCEL on screen and press the
ENTER or INPUT button.
(continued on next page)
57
NETWORK Menu
NETWORK Menu (continued)
Item
Description
Selecting this item displays the e-SHOT
menu.
The application software “PJTransfer”
is required to store image(s) into the
projector.
Use the ▲/▼ buttons to select an item which is a still image by the
e-SHOT ( e-SHOT (Still Image Transfer) Display of the User’
s Manual - Network Guide) and the ► or ENTER button to display
the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
e-SHOT
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ or ESC button on the remote control.
To erase the image displayed and its source file in the projector.
(1) Press the RESET button on the
remote control while displaying
an image to display the e-SHOT RESET menu.
(2) Press the ENTER button on the remote control or the INPUT
button on the projector to perform to erase.
To stop erasing, press the ESC button on the remote control or
the ◄ button on the projector.
(continued on next page)
58
NETWORK Menu
NETWORK Menu (continued)
Item
Description
Selecting this item displays the NETWORK -INFORMATION- dialog
for confirming the network settings.
INFORMATION
• The PROJECTOR NAME is displayed.
• Nothing (blank) is shown in the “PROJECTOR NAME” field until
you setup the item (57).
• When the voltage level of the battery for the built in clock
decreases, the set time may become incorrect even though accurate
date and time are input. Replace the battery suitably (65).
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
“0.0.0.0” when DHCP is ON and the projector has not gotten
address from DHCP server.
Executing this item restarts and initializes the network functions.
Choose the RESTART using the button ►.
Then use the button ▲ to execute.
SERVICE
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART, NETWORK Menu may not be controlled
approx. 30 seconds.
59
C.C. (Closed Caption) Menu
C.C. (Closed Caption) Menu
The closed caption setting can be changed through C.C. Menu
in the advance menu. Please select the item that you will change
using ▲/▼ cursor buttons.
• The C.C. (Closed Caption) is the function that displays a
transcript or dialog of the audio portion of a video, files or other
presentation or other relevant sounds. It is required to have NTSC
format video or 525i(480i) Component video source supporting
C.C. feature to utilize this function.
Item
Description
Select Closed Caption DISPLAY setting from
following options using ▲/▼buttons.
TURN OFF ó TURN ON ó AUTO
DISPLAY
MODE
TURN OFF: Closed Caption is OFF
TURN ON: Closed Caption is ON
AUTO: Closed Caption automatically displays when the
volume is muted.
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue, narration,
and / or sound effects of a television program or other video sources. The
Closed Caption availability is depending upon broadcaster and/or content.
• The caption is available if the video source is NTSC format and
the video format selection is AUTO or NTSC on the INPUT Menu,
when either VIDEO or S-VIDEO is selected as input port.
• The caption is also available if 525i(480i) video signal is input from
COMPONENT port, when it is selected as input port.
• It may not work properly, depending on equipment or signal
source. In this case, please turn off the Closed Caption.
Select Closed Caption MODE setting from
following options using ▲/▼buttons.
CAPTIONS ó TEXT
CAPTIONS: Display Closed Caption
TEXT: D
isplay Text data, which is for additional information such as
news reports or a TV program guide. The information covers the
entire screen. Not all of the C.C. program has Text information.
Select Closed Caption CHANNEL from following options using
▲/▼buttons.
1ó2ó3ó4
CHANNEL
60
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some
channel might be used for secondary language or empty.
Maintenance
Maintenance
Replacing the lamp
The projection lamp has finite product life that is different in each lamp. Please replace the
lamp as soon as possible when the pictures appear dark, or when the color tone is poor.
Using the lamp for long periods of time may make the lamp burned out or broken.
Preparation of a spare lamp and early replacement are recommended. To prepare the new
lamp, call your dealer and tell the type number: 456-8100
the projector off and unplug the power cord from the power outlet.
1. Turn
And cool the projector down by leaving it for about 45 minutes as it is.
When the projector is mounted on a ceiling or somewhere over your head, or when the
lamp may have been broken, be sure to refer replacement to your dealer or service person,
since it may be dangerous.
Only in case of replacement by yourself, follow the following procedure.
the screw (marked by arrow) of the
2. Loosen
lamp cover, and then slide the lamp cover to
Lamp cover
the side to remove it.
the 2 screws (marked by arrows) of
3. Loosen
the lamp, and slowly pick up the lamp by the
handles.
the new lamp, with cautions not to
4. Insert
touch the inside of the lamp house. When
inserting, pay attention to the socket position
first, and to the pins for positioning next.
firmly the 2 screws of the lamp that
5. Tighten
are loosened in the previous process to lock
Screw
it in place.
the lamp cover into place and firmly
6. Slide
tighten the screw of the lamp cover.
in and restart the projector (12, 16).
7. Plug
Then, reset the lamp time (which is the time
Pin for
positioning
Socket
Lamp house
(inside of the
lamp cover)
counter for the lamp use).
(1) Press the ▲ or ▼ button on the projector
or the MENU button on the remote control.
The “EASY MENU” appears.
Screw
(2) Point at the “Go to Advanced Menu …”
Pin for positioning
in the menu using the ▲ or ▼ button, then
press the ► button. “MENU” appears.
(3) Pointed at the “OPTION” in the left column using the ▲ or ▼ button, then press
the ► button. The cursor moves to the right column.
(4) Pointed at the “LAMP TIME” using the ▲ or ▼ button, then press the ► button.
A dialog appears.
(5) Press the ▲ button to select the “RESET” on the dialog. It performs resetting the
lamp time.
61
Maintenance
Replacing the lamp (continued)
NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
WARNING ►The projector uses a high-pressure mercury glass lamp. The
lamp can break with a loud bang, or burn out, if jolted or scratched, handled
while hot, or worn over time. Note that each lamp has a different lifetime, and
some may burst or burn out soon after you start using them. In addition, when
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and
for gas containing mercury to escape from the projector’s vent holes.
About disposal of a lamp: This product contains a mercury lamp; do not put it in a
trash. Dispose of it in accordance with environmental laws.
• For lamp recycling, go to www.lamprecycle.org (in the US).
• For product disposal, contact your local government agency or www.eiae.org
(in the US) or www.epsc.ca (in Canada).
For more information, call your dealer.
• If the lamp should break (it will male a loud bang when it does), unplug the
power cord from the outlet, and make sure to request a replacement lamp from
your dealer. Note that shards of glass could damage the projector’s internals,
or cause injury during handling, so please do not try to clean the projector or
replace the lamp yourself.
• If the lamp should break (it will male a loud bang when it does), ventilate the
room well, and make sure not to breathe the gas that comes out of the projector
vents or get it in your eyes or mouth.
• Before replacing the lamp, turn the projector off and unplug the power cord,
then wait for at least 45 minutes for the lamp to cool sufficiently. Handling the
lamp while hot can cause burns, as well as damaging the lamp.
• Never unscrew except the appointed (marked by an arrow) screw.
• Do not open the lamp cover while the projector is suspended from a ceiling
or somewhere over your head. This is dangerous, since if the lamp’s bulb has
broken, the shards will fall out when the cover is opened. In addition, working
in high places is dangerous, so ask your local dealer to have the lamp replaced
even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp replacing,
make sure that the screws are screwed in firmly. Loose screws could result in
damage or injury.
• Use only the lamp of the specified type.
• If the lamp breaks soon after the first time it is used, it is possible that there
are electrical problems elsewhere besides the lamp. If this happens, contact
your local dealer or service representative.
• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• Using the lamp for long periods of time, could cause it dark, not to light up or
to burst. When the pictures appear dark, or when the color tone is poor, please
replace the lamp as soon as possible. Do not use old (used) lamps; this is a
cause of breakage.
62
Maintenance
Maintaining the air-filter
Please check and clean the air-filter periodically, for keeping normal ventilation.
When the indicators or a message prompts you to clean the air-filter, comply with
it as soon as possible.
When it is damaged or too soiled, replace the filter unit. To prepare the new filter
unit, call your dealer and tell the type number: QD60122
the projector off and unplug the power cord
1. Turn
from the power outlet. And cool the projector
2.
3.
down by leaving it for a while as it is.
Use the vacuum cleaner on and around the filter
unit.
Slide the filter unit upward to take it off from the
projector.
Filter unit
the vacuum cleaner on the intake vents of
4. Use
the projector.
the vacuum cleaner on the cover side of the
5. Use
filter unit. Do not vacuum the air-filter directly,
since the cleaner may inhale the air-filter.
When the air-filter is damaged or too soiled,
prepare the new filter unit.
Intake vents
sure that there is the air-filter inside, then
6. Make
slide the filter cover into place.
7. Plug in and restart the projector (12, 16).
Then, reset the filter time (which is the time counter for the air-filter use).
(1) Press the ▲ or ▼ button on the projector or the MENU button on the
remote control. The “EASY MENU” appears.
(2) Point at the “FILTER TIME” in the menu using the ▲ or ▼ button, then
press the ► button. A dialog appears.
(3) Press the ▲ button to select the “RESET” on the dialog. It performs
resetting the filter time.
(continued on next page)
63
Maintenance
Maintaining the air-filter (continued)
NOTE • A filter unit of specified type will come with the replacement lamp
for this projector. Replacing the filter unit at the same time with the lamp is
recommended.
• Please reset the filter time only when you have cleaned the air-filter, for a
suitable indication about the air-filter.
• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.
WARNING ►Before taking care of the air-filter, make sure the power switch
is off and the power cable is not plugged in, then allow the projector to cool
sufficiently. Taking care of the air-filter in a high temperature state of the projector
could cause an electric shock, a burn or malfunction to the projector.
►Use only the air-filter unit of the specified type. Do not use the projector
without the air-filter or the filter cover. It could result in a fire or malfunction to the
projector.
►Clean the air-filter periodically. If the air-filter becomes clogged by dust or the
like, internal temperatures rise and could cause a fire, a burn or malfunction to
the projector.
64
Maintenance
Replacing the clock battery
This projector has internal clock that uses a battery. When the clock of the network
function does not work correctly, please try solution by replacement of the battery:
HITACHI MAXELL, part number CR2032.
the projector off and unplug the power cord
1. Turn
from the power outlet. And cool the projector
Battery cover
down by leaving it for a while as it is.
Place gently the projector upside down.
2.
the battery cover.
3. Remove
Turn the battery cover in the direction indicated
Close
as “OPEN” till it unlocks using a coin or
something similar. When finishing turning the
battery cover, pick its knob to remove it.
Open
Take the old battery out.
Press the metal claw of the battery holder. Then
Metal claw
the battery will come up. Remove it.
CLO
SE
OPE
N
4.
the new battery into the battery holder,
5. Put
according to the polarity markings (-) inside the
holder, so that the side marked (+) of the battery
is facing upward. Push the battery into the
battery holder fully to fix.
the battery cover into place, then turn it in
6. Put
the direction indicated as “CLOSE” until it fixed,
using a coin or something similar.
NOTE • The internal clock will be initialized by removing the battery. For
setting the clock, see the User's Manual - Network Guide.
WARNING ►Be careful of handling a battery, as a battery can cause
explosion, cracking or leakage, which could result in a fire, an injury, and
environment pollution.
• Use only the specified and perfect battery. Do not use a battery with damage,
such as a scratch, a dent, rust or leakage.
• When a battery leaked, wipe the leakage out well with a waste cloth. If the
leakage adhered to your body, immediately rinse it well with water. When a battery
leaked in the battery holder, replace the batteries after wiping the leakage out.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Do not work on a battery; for example recharging or soldering.
• Keep a battery in a dark, cool and dry place. Never expose a battery to a fire or water.
• Obey the local laws on disposing a battery.
65
Maintenance
Caring for the mirror and lens
If the projection mirror or lens is flawed, soiled or fogged, it could cause
deterioration of display quality. Please take care of the mirror and lens, being
cautious of handling.
the projector off and unplug the power cord
1. Turn
from the power outlet. And cool the projector
2.
down by leaving it for a while as it is.
The lens door can be opened manually.
Please hold both side of the lens door and slowly
open it until it is locked with clicking sound.
UTER
COMP
UTER
COMP
softly the mirror and lens with a cleaning
3. Wipe
cloth for lens on the market, being careful not to
IN2
UTER
COMP
EO
S-VID
AUDIO
LAN
1
2
IN
R
CR/P
B
CB/P
R
Y
L
IN3
VIDEO AUDIO
UTER
COMP
UTER
COMP
IN2
UTER
COMP
IN1
EO
S-VID
AUDIO
Y
CB/P
B
CR/P
L
VIDEO AUDIO
LAN
1
AUDIO
OUT
OUT
USB
ROL
CONT
IN1
AUDIO
OUT
OUT
USB
ROL
CONT
2
IN
R
R
IN3
give any damage on the mirror and lens.
For around edge of the mirror and lens where
might be difficult to be wiped out, please use an
air blower for cameras on the market to clean up.
close the lens door properly, please take the
4. To
following procedure.
(1) Plug in the projector.
(2) Turn on the power switch.
Even though the lens door starts to close, it
Cleaning cloth
might not be closed properly.
(3) Press the STANDBY/ON button, so that the
lamp starts to light up.
(4) After the POWER indicator turns to steady
green, press the STANDBY/ON button twice to
turn off the projector.
The lens door will close properly.
Blower
NOTE • When the lens door is closed manually, it may not shut properly.
WARNING ►Before caring for the projection mirror and lens, turn the
projector off and unplug the power cord, then cool the projector sufficiently.
►Do not use a vacuum cleaner to clean the projection mirror or lens, since it
might give some damage.
►Do not use cleaners or chemicals other than those specified in this manual.
Especially the mirror has to be paid special attention, since these materials might
give serious damage on the mirror.
CAUTION ►Be careful not to pinch your finger with the lens door, to
prevent an injury.
66
Maintenance
Other care
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your dealer about once every year.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a
soft, dry cloth.
1.
2.
WARNING ►Before caring, make sure the power cord is not plugged in,
and then allow the projector to cool sufficiently. The care in a high temperature
state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so
dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in
a fire, an electric shock, and/or malfunction to the projector.
• Do not put anything containing water, cleaners or chemicals near the projector.
• Do not use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the
following. Incorrect care could cause not only an injury but adverse influence
such as discoloration, peeling paint, etc.
►Do not use cleaners or chemicals other than those specified in this manual.
►Do not polish or wipe with hard objects.
67
Troubleshooting
Troubleshooting
If an abnormal operation should occur, stop using the projector immediately.
WARNING ►Never use the projector if abnormal operations such as
smoke, strange odor, excessive sound, damaged casing or elements or cables,
penetration of liquids or foreign matter, etc. should occur. In such cases,
immediately turn off the power switch and then disconnect the power plug from
the power outlet. After making sure that the smoke or odor has stopped, contact
to your dealer or service company.
Otherwise if a problem occurs with the projector, the following checks and
measures are recommended before requesting repair.
If this does not resolve the problem, please contact your dealer or service
company. They will tell you what warranty condition is applied.
Related messages
When some message appears, check and cope with it according to the following
table. Although these messages will be automatically disappeared around several
minutes, it will be reappeared every time the power is turned on.
Message
Description
There is no input signal.
Please confirm the signal input connection, and the status
of the signal source.
The horizontal or vertical frequency of the input signal
is not within the specified range.
Please confirm the specs for your projector or the signal
source specs.
The internal temperature is rising.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After having confirmed the
following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air-filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set
FAN SPEED of the SERVICE item in the OPTION Menu to HIGH.
A note of precaution when cleaning the air-filter.
Please immediately turn the power off, and clean or change
the air-filter referring to the “Maintaining the air-filter” section
of this manual. After you have cleaned or changed the airfilter, please be sure to reset the filter time (43, 63).
68
Troubleshooting
Regarding the indicator lamps
When operation of the LAMP, TEMP and POWER indicators differs from usual,
check and cope with it according to the following table.
POWER
LAMP
TEMP
Description
indicator indicator indicator
Lighting
Turned
Turned The projector is in a standby state.
Please refer to the section “Power on/off”.
In Orange
off
off
Blinking
In Green
Turned
off
Turned
off
The projector is warming up.
Please wait.
Lighting
In Green
Turned
off
Turned
off
The projector is in an on state.
Ordinary operations may be performed.
Blinking
In Orange
Turned
off
Turned
off
The projector is cooling down.
Please wait.
Blinking
In Red
(discretionary)
(discretionary)
Blinking
In Red
or
Lighting
In Red
Lighting
In Red
Turned
off
Blinking
In Red
or
Lighting
In Red
Blinking
In Red
or
Lighting
In Red
Lighting
In Red
Turned
off
The lamp cover has not been properly fixed.
Please turn the power off, and allow the projector to cool down
at least 45 minutes. After the projector has sufficiently cooled
down, please make confirmation of the attachment state of the
lamp cover. After performing any needed maintenance, turn
the power on again. If the same indication is displayed after
the remedy, please contact your dealer or service company.
Blinking
In Red
The cooling fan is not operating.
Please turn the power off, and allow the projector to cool down at
least 20 minutes. After the projector has sufficiently cooled down,
please make confirmation that no foreign matter has become
caught in the fan, etc., and then turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
Turned
off
The lens door is not opened or closed properly.
One of the followings has been happened.
• The lens door is not opened properly, when the projector is turned on.
• The lens door is not closed properly, when the projector is turned off.
• The lens door position is shifted, while the projector is working.
Restart the projector, after confirming that there is nothing
that the lens door hits while opening or closing.
Blinking
In Red
Turned
off
The projector is cooling down. A certain error has
been detected.
Please wait until POWER indicator finishes blinking,
and then perform the proper measure using the item
descriptions below.
The lamp does not light, and there is a possibility that
interior portion has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of the
following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air-filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please change the lamp referring to the section “Lamp”.
Turned
off
(continued on next page)
69
Troubleshooting
Regarding the indicator lamps (continued)
POWER
LAMP
TEMP
indicator indicator indicator
Description
There is a possibility that the interior portion
has become heated.
Blinking
In Red
or
Lighting
In Red
Turned
off
Lighting
In Red
Please turn the power off, and allow the projector to cool down at least
20 minutes. After the projector has sufficiently cooled down, please make
confirmation of the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air-filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set
FAN SPEED of SERVICE item in OPTION menu to HIGH (45).
It is time to clean the air-filter.
Lighting
In Green
Simultaneous
blinking in Red
Lighting
In Green
Alternative
blinking in Red
Blinking in
Green for
approx. 3
seconds
Turned
off
Turned
off
Please immediately turn the power off, and clean or
change the air-filter referring to the section “Maintaining
the air-filter”. After cleaning or changing the air-filter,
please be sure to reset the filter timer.
After the remedy, reset the power to ON.
There is a possibility that the interior portion
has become overcooled.
Please use the unit within the usage temperature
parameters (5°C to 35°C).
After the treatment, reset the power to ON.
At least 1 Power ON schedule is saved to the
projector.
Please refer to “Schedule Settings” section of User’s
Manual-Network Guide.
NOTE • When the interior portion has become overheated, for safety purposes,
the projector is automatically shut down, and the indicator lamps may also be
turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.
After the projector has sufficiently cooled down, please make confirmation of the
attachment state of the lamp and lamp cover, and then turn the power on again.
Shutting the projector down
Only when the projector can not be turned off by usual
procedure (17), please push the shutdown switch using
a pin or similar, and disconnect the power plug from the
power outlet. Before turning it on again, wait at least 10
minutes to make the projector cool down enough.
Resetting all settings
Shutdown switch
MONITOR OUT
When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE
item in OPTION Menu (46) can reset all settings(except LANGUAGE, FILTER TIME,
LAMP TIME, FILTER MESSAGE, NETWORK settings and etc.) to the factory default.
70
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it
according to the following table.
Phenomenon
Cases not involving a machine defect
The electrical power cord is not plugged in.
Correctly connect the power cord.
The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Power does not
come on.
Please disconnect the power plug from the power outlet,
and allow the projector to cool down at least 10 minutes,
then turn the power on again.
12
12, 16
Either there is no lamp and/or lamp cover, or either
of these has not been properly fixed.
Please turn the power off and disconnect the power plug from
the power outlet, and allow the projector to cool down at least
45 minutes. After the projector has sufficiently cooled down,
please make confirmation of the attachment state of the lamp
and lamp cover, and then turn the power on again.
The signal cables are not correctly connected.
Correctly connect the connection cables.
Signal source does not correctly work.
Correctly set up the signal source device by referring to the
manual of the source device.
Neither sounds
nor pictures are
outputted.
Reference
page
The input changeover settings are mismatched.
Select the input signal, and correct the settings.
61
10
–
18, 19
The BLANK function for pictures and the MUTE
function for sounds are working.
The BLANK and MUTE, or AV Mute may be active. Refer
to the item “Sound does not come out” and “No pictures
are displayed” on the next page to turn off the MUTE and
BLANK functions.
18, 23
(continued on next page)
71
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Cases not involving a machine defect
The signal cables are not correctly connected.
Correctly connect the audio cables.
The MUTE function is working.
Sound does not
come out.
Restore the sound pressing MUTE or VOLUME button on
the remote control.
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu function
or the remote control.
The AUDIO/SPEAKER setting is not correct.
Correctly set the AUDIO/SPEAKER in SETUP Menu.
The lens door is not fully opened.
Turn the projector off, and then turn it on again to make sure
that the door is opened correctly.
The signal cables are not correctly connected.
Correctly connect the connection cables.
No pictures are
displayed.
The brightness is adjusted to an extremely low level.
Adjust BRIGHTNESS to a higher level using the menu
function.
The computer cannot detect the projector as a plug
and play monitor.
Make sure that the computer can detect a plug and play
monitor using another plug and play monitor.
The BLANK screen is displayed.
Press BLANK button on the remote control.
(continued on next page)
72
Reference
page
10
18
18
37
16, 66
10
27, 28
11
23
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Video screen
display freezes.
Cases not involving a machine defect
The FREEZE function is working.
Press FREEZE button to restore the screen to normal.
Color settings are not correctly adjusted.
Colors have a
faded- out
appearance, or
Color tone is
poor.
Perform picture adjustments by changing the COLOR
TEMP, COLOR, TINT and/or COLOR SPACE settings,
using the menu functions.
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240, REC709 or REC601.
The brightness and/or contrast are adjusted to an
extremely low level.
Pictures appear
dark.
Adjust BRIGHTNESS and/or CONTRAST settings to a
higher level using the menu function.
The whisper function is working.
Select NORMAL for WHISPER item in the SETUP Menu.
The lamp is approaching the end of its product
lifetime.
Replace the lamp.
Either the focus and/or horizontal phase settings are
not properly adjusted.
Pictures appear
blurry.
Adjust the focus using the focus ring, and/or H PHASE
using the menu function.
The lens or mirror is dirty or misty.
Clean the lens or mirror referring to the section “Caring for
the lens”.
Reference
page
23
27, 29,
33
33
27, 28
27, 36
61, 62
21, 32
66
NOTE • Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
73
Specifications
Specifications
Specifications
Item
Specifications
Product name
Liquid crystal projector
Liquid
Crystal
Panel
Panel size
1.6 cm (0.63 type)
Drive system TFT active matrix
Pixels
786,432 pixels (1024 horizontal x 768 vertical)
Lens
F=2.1 f=5.1 mm
Lamp
220 W UHB
Audio output
7W
Power supply
AC 100-120V/3.6A, AC 220-240V/1.5A
Power consumption
340W
Temperature range
5~35°C (operating)
Ports
COMPUTER IN1........................... D-sub 15 pin mini x 1
COMPUTER IN2........................... D-sub 15 pin mini x 1
Y, CB/PB, CR/PR (Component video)................... RCA x 3
S-VIDEO..............................................mini DIN 4 pin x 1
VIDEO................................................................ RCA x 1
MONITOR OUT............................. D-sub 15 pin mini x 1
AUDIO IN1.............................................. Stereo mini x 1
AUDIO IN2.............................................. Stereo mini x 1
AUDIO IN3 (L, R) .............................................. RCA x 2
AUDIO OUT............................................. Stereo mini x 1
CONTROL............................................... D-sub 9 pin x 1
USB................................................................ USB-B x 1
LAN................................................................... RJ45 x 1
Optional parts
Lamp: 456-8100
Filter unit: QD60122
Tabletop use kit: TT100
Soft case: CA100
* For more information, contact to your dealer.
Weight (mass)
5.8 kg (approx.)
Size
397 (W) x 131 (H) x 356 (D) mm
*Excluding protrusions. Please refer to the following
figure.
74
Specifications
Specifications (continued)
366
378
356
397
113
225
131
139
[unit: mm]
75