Epson SD-DSP7B Network Router User Manual

Epson SD-DSP7B Network Router User Manual
Specialized Interface Modules
P7 IBM Interface
Superior printing performance while maintaining
your current IBM® hardware investment.
Epson’s exclusive Connect-It™ interface technology enables
you to upgrade to an Epson POS printer, improving the
printing speed and performance of your existing IBM system.
The Connect-It interface is an integrated, low-cost module
that converts the protocol of your IBM terminals to the
Epson ESC/POS® command set.
•IBM Model 3/4® emulation and 4610 Native mode support
• Legacy system investment protection
• No external power supply needed
• Uses existing IBM printer cable
• Stored graphic logos in non-volatile printer memory
• Easy installation
Ease of use
Epson printers with Connect-It
interfaces are easy to install. Simply
disconnect your old printer and
connect your new Epson printer to
the existing IBM interface cable and
you’re ready to print. It doesn’t get
any easier than that!
Standard functional operation
The Epson P7 module uses a microcontroller to convert IBM printer
operations into Epson ESC/POS
codes. Power supplied by the IBM
host machine is transformed into the
voltage required by the Epson printer. The Epson P7 module supports
model 3/4 and 4610 Native mode
printer commands, status requests,
and diagnostics.
Electronic journal option
Save time, resources, and money.
The electronic journal captures all
transaction data and stores them
electronically. This allows remote
retrieval by the host or back office
computer for processing and
archiving. No need to waste time
purchasing, replacing or storing
paper journal rolls.
Ready for the future
Epson technology is a wise investment in your future point-of-sale
solution. Today, Epson printers with
Connect-It interfaces will significantly improve your printing performance. And tomorrow, Epson printers will be ready to move to your
next POS terminal by simply replacing the modular interface. Designed
to support the leading industry
standards, your Epson printers will
continue to deliver a high quality,
reliable and cost-effective migration
path to your future POS system.
Specialized Interface Modules
P7 Modules
Connect-It Interface Specifications
Systems SupportedIBM 4683, 4684, 4693, 4694, SurePOS 700
Protocol & CommandsIBM SI/O protocol and commands are converted to ESC/POS
ConnectivityStandard P7 interface
Power SupplyUses existing IBM terminal power supply
Connector16-pin SEMCON-type, compatible with existing IBM printer cable
Electronic Journal Option*2 MB (approximately 6½ rolls of journal)
*Larger capacities available on request
To find out more about our line of Connect-It Interfaces, talk to your Epson Sales Representative.
Epson America, Inc. • 3840 Kilroy Airport Way • Long Beach, CA 90806 • (562) 290-5304 •
©2008 Epson America, Inc. Epson and ESC/POS are registered trademarks and Epson Exceed Your Vision is a registered logomark of
Seiko Epson Corporation. Connect-It is a trademark of Epson America, Inc. All other trademarks are property of their respective owners.
Specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF