User guide | Ericsson 3213 Telephone User Manual

User Guide
Dialog 3213
System telephone for MD110, release BC7-BC10
Welcome
Welcome to the User Guide for the Dialog 3213 telephone in the
Ericsson Enterprise business communication system MD110,
release BC7-BC10.
It is a state-of-the-art business communications system. Its alliance
of features and facilities effectively improves communications for
virtually any kind of organization.
To take full advantage of these advanced features and facilities there
is a line of telephones, designed for ease of use in every situation.
Your phone is equipped with programmable keys for single-key
access to frequently used functions and numbers. Step-by-step
instructions in the display assist your actions on the phone. Only
a selected number of display images, however, are shown in the
User Guide for your reference.
Function descriptions that do not include speaking in the handset, are described off-hook, if nothing else is stated. Instead of
pressing the ”Clear-key”, you can always replace the handset.
Some markets use differing codes for some functions. In this
guide, all functions are described using the most common code
for every specific function. As a note the markets and their
differing code is shown.
The User Guide describes the facilities of the Ericsson Enterprise
communication system and the Dialog 3213 telephone as they
are programmed at delivery from the factory. There may be some
differences in the way your phone is programmed. Please consult
your system administrator if you need further information.
Note: Dialog 3213 is a system telephone, i.e. it can only
be used for an Ericsson private branch exchange that
supports this type of telephone.
2
Dialog 3213
Table of Contents
Table of Contents
page
Description ................................................4
Incoming Calls ..........................................6
Outgoing Calls ..........................................8
During Calls ............................................11
When You Receive a Busy Tone ............17
Call Forwarding ......................................21
Internal Messages ..................................32
Voice Mail ..............................................34
Information ............................................37
Abbreviated Numbers ............................39
Call Metering ..........................................44
Group Facilities ......................................46
Other Useful Facilities ............................48
Paging (optional) ....................................57
Authority ................................................62
Programming and Adjustments ..............67
Audible Signals ......................................76
Visible Signals ........................................78
Display Information ................................79
Option Unit/Vocabulary ..........................83
Installation ..............................................84
Labels ....................................................87
Index ......................................................88
EN/LZT 102 2553 RE
© Ericsson Enterprise AB 2001
All rights reserved. No parts of this publication may be reproduced,
stored in retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying,
recording or otherwise, without prior written permission of the publisher.
Dialog 3213
3
Description
Description
1
16
2
Dialog 3213
MD110
MD110
ABC
3
4
5
6
7
6
8
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
11
12
13
9
14
Program
10
Menu
•
15
•
•
•
•
6
•
Transfer
•
Inquiry
•
Access 2
•
Access 1
•
17
MD110
Program
ABC
•
Menu
DEF
•
GHI
JKL
MNO
PQRS
TUV
WXYZ
•
•
•
•
4
Transfer
•
Inquiry
•
Access 2
•
Access 1
•
1
Display
3x40 characters. See section ”Display information”.
2
Soft keys
The functions depend on the traffic state. When you are requested
to ”(see display)”, press the required key to access the function.
3
Programming
See section ”Programming”.
Dialog 3213
Description
Dialog 3213
4
Callback
See section ”When you receive a busy tone”. Function can be
removed or moved to other programmable function key by
system administrator.
5
Diversion (follow-me)
See section ”Call forwarding”. Function can be removed or moved to
other programmable function key by system administrator.
6
Programmable function keys
See section ”Programming”.
7
Programmable function key/Headset key
Normally a programmable function key as described at 6.
With Option unit DBY 410 02 (optional accessory) installed under
the telephone, the key is dedicated to be programmed by the
system administrator as the Headset key. See section "Other
useful facilities/Headset”.
8
Transfer
See section ”During calls”.
9
Triple access line
For handling calls. Access 1 and 2 are available both for incoming
and outgoing calls. Inquiry can only be used for outgoing calls.
10
Menu key
When the telephone is in idle state, press to switch between ”idle
message” and soft key descriptions.
11
Volume control
See section ”Adjustments”.
12
Mute
a) To switch the microphone on or off during a call.
b) To switch off the ringing signal in idle state or when ringing.
See sections ”During calls” and “Audible signals”.
13
Loudspeaker on/off
See section ”During calls”.
14
Clear
To disconnect calls, exit a function or clear the display in programming.
Can always be pressed instead of replacing the handset.
15
Optional key panel
With 17 dual-function programmable keys.
One or two panels can be connected.
16
Handset
Supplied with hearing aid function as standard.
17
Optional pull-out leaf for easy guide
See inside of the back cover.
5
Incoming Calls
Incoming Calls
Answer calls
A ringing signal and a flashing lamp indicate an incoming call.
On Access 1
Normally you will receive calls on the Access 1 line.
Lift the handset
On any other line key
Lift the handset
Press the flashing line key
Handsfree
Press the flashing line key
You are connected to the caller via the loudspeaker and
microphone.
Press to terminate a handsfree call
6
Dialog 3213
Incoming Calls
On another extension
You can answer a call to a phone in another room:
Call the ringing extension
14:25
LNR
CAW
12FEB 2001
CUP
2222
INT
Note: The display image might differ from the above.
8
Press
Notes:
- You can also press CUP (see display) or On-hold/Pick-up
(function key pre-programmed by you).
- France-press 4; Sweden-press 6
Answer a second call during an ongoing call
If your telephone is pre-programmed with a ”Free on 2nd access”
key, you can receive another call, if this function is activated.
Free on 2nd Access
Press to activate / deactivate
When Free on 2nd access is active the lamp is lit.
Note: Function key pre-programmed by system administrator.
You have an ongoing call on Access 1, when the Access 2 key
flashes to indicate a new incoming call:
Access 2
Press to answer
The first call is put on hold.
Access 1
Press to switch back to the first call
The second call is put on hold. You are connected to the first caller.
Press to terminate the connected call
Note: If the calling party has activated Call waiting, you
can receive a second call even if Free on 2nd access is
not activated.
Dialog 3213
7
Outgoing Calls
Outgoing Calls
Make calls
How to make internal and external calls:
Lift the handset and proceed depending on call type:
Internal calls
Dial the extension number
External calls
0
Dial the digit or digits to get an external line
Dial tone.
Note: The particular digit or digits used in your office,
e.g. 0 or 00.
Dial the external number
or
Press to end the call
Note: If you receive a queue tone when the digit or digits
to get an external line are dialled (optional function Least
Cost Routing is used in the system), keep waiting.
Once a line becomes free you will receive a dial tone.
If a warning tone is heard, the selected line is marked
“Expensive”.
8
Dialog 3213
Outgoing Calls
Handsfree
With the handset on hook:
Dial the number
You are connected via the loudspeaker and microphone.
Press to terminate a handsfree call
Note: You can make your calls faster by using common
abbreviated numbers and by using your own programmed
abbreviated numbers. See section ”Abbreviated numbers”.
Individual external line
To make a call on a specific external line:
*0*
#
Press
Dial the individual external line number and press
Dial the digit or digits to get an external line and the
external number
Last external number redial
When you initiate an external call the system automatically
stores all the dialled digits, irrespective of whether the call
was successful or not.
Lift the handset
***
Press to redial the saved number
The last external number is automatically redialled.
Notes:
- You can also press LNR (soft key). LNR is only available
if shown in display.
- Finland and Sweden-press * * 0
Dialog 3213
9
Outgoing Calls
Save external number
When you make an external call, you can save the number in
order to redial the same number easily. Any previously saved
number is erased.
To save an external number:
Redial
Press before you finish the call
Note: Function key pre-programmed by system
administrator.
Redial number
Lift the handset
Redial
Press to redial the number
Note: Function key pre-programmed by system
administrator.
10
Dialog 3213
During Calls
During Calls
Group listening (loudspeaking)
This function lets other people in your room listen to your telephone conversation. You speak in the handset while the other
party´s voice is heard on the loudspeaker.
During an ongoing conversation:
Press to switch between loudspeaker and handset
When the key lamp is lit, the other party´s voice is heard on the
loudspeaker.
Note: You can adjust the volume, See section ”Adjustments”.
From loudspeaking to handsfree
Replace the handset
Handsfree conversation.
From handsfree to loudspeaking
Lift the handset and press
Press to end the call
Dialog 3213
11
During Calls
From handset to handsfree
Press and replace the handset
Handsfree conversation.
Press to end the call
From handsfree to handset
Lift the handset
Conversation via the handset.
Mute
Press to switch the microphone on or off
When the lamp is lit, the person on the line cannot hear
what is being said in your room.
12
Dialog 3213
During Calls
Inquiry
You have speech connection on Access 1 and want to make an
inquiry to an internal or external party.
Inquiry
Press
Note: You can also press Access 2.
Call the second party
The first party is put on hold (the Access 1 key lamp flashes slowly).
When the other party answers you can switch between the calls
(refer back), transfer the call, create a conference and end one of
the calls.
Press to end the inquiry call
The second party is disconnected.
Access 1
Press to return to the first party
Refer back
The key lamp flashes for the call put on hold.
Access 1
Inquiry
Press to put second party on hold
First party is connected.
Press to put first party on hold
Second party is connected.
Press to terminate the connected call
Dialog 3213
13
During Calls
Transfer
You want to transfer an ongoing call.
Inquiry
Press
Call the second party
Transfer
Press before or after answer
The ongoing call is transferred.
Note: If you have put more than one call on hold, the last
call that was put on hold will be transferred. If the dialled
extension is busy or transfer is not allowed, your phone
will ring again.
Conference
With this procedure you can include up to seven parties in a
conference. Only the conference leader can admit participants.
During the conference a tone will be heard every 15th second.
You have an ongoing conversation (Access 1) and want to establish
a telephone conference. You will become the conference leader.
Inquiry
Press
Note: You can also press Access 2.
Call the second party
Wait for answer.
3
Press to establish a conference
Note: You can also press: CONF (see display) or
Conference (function key pre-programmed by you).
Repeat the procedure to add more conference members
Replace the handset to leave the conference
14
Dialog 3213
During Calls
On hold
You can temporarily put the ongoing call on hold. Calls put on
hold can be resumed on your own telephone or another.
Individual
Press the ongoing call line key and replace the handset
The key lamp flashes slowly.
Press the line key again to resume the call
Common
8
Press
Notes:
- You can also press: CUP (see display) or On hold/Pick-up
(function key pre-programmed by you).
- France-press 4; Sweden-press 6
Replace the handset
The key lamp flashes slowly.
To resume the call on your own extension:
Press the line key
To resume the call on another extension:
Call the extension where the call was put on hold
8
Press
Notes:
- You can also press: CUP (see display) or On hold/Pick-up
(function key pre-programmed by you).
- France-press 4; Sweden-press 6
Dialog 3213
15
During Calls
Send caller identity code at transfer
When transferring a call you can send the caller´s identity code or
number to the receiver´s display.
You have speech connection with an external party on Access 1.
Inquiry
Press to put the call on hold
Note: You can also press Access 2.
*77*
#
Press
Dial the caller´s identity code or number and press
Call the second party
Transfer
Press before or after answer
The ongoing call is transferred with the caller´s identity code or
number.
Note: You can only use this function if the receiver´s telephone is programmed to handle identity codes. This
function is only available in newer versions of the telephone exchange.
Dialling during a connected call
When calling interactive tele services, e.g. telephone banks, you
need to use Dual Tone Multi Frequency (DTMF) signals. If your
exchange is not already programmed to automatically convert
your entered digits into DTMF signals, you need to activate the
function during the call.
During an ongoing call:
9
Press and dial the requested digits
Entered digits are transferred as DTMF signals.
Notes:
- You can also press ETE (see display).
- Finland-press 1 and dial the required digits.
16
Dialog 3213
When You Receive a Busy Tone
When You Receive a Busy Tone
Busy extension or external line
If you call an extension and receive a busy tone or get no
answer or all external lines are busy you can use these methods:
Automatic callback
If a called extension is busy or there is no answer:
14:25
EXTENSION BUSY
LNR
CAW
6
12FEB 2001
CUP
4444
INT
Press
Notes:
- You can also press: CAB (see display) or Callback
(function key pre-programmed by you).
- Finland and Sweden-press 5
Replace the handset to finish procedure
You are called back (recall ringing signal) when the ongoing call is
finished or the next time a new call is finished. You have to answer
within eight seconds, otherwise the Callback service is cancelled.
Lift the handset when you are called back
The system calls the extension.
Note: Callbacks can be activated on several extensions
at the same time. Callbacks from additional lines will
recall on the Access 1 line.
Dialog 3213
17
When You Receive a Busy Tone
If all external lines are busy (after dialling the digit or digits to get a line):
6
Press
Notes:
- You can also press: CAB (see display) or Callback
(function key pre-programmed by you).
- Finland and Sweden-press 5
#
Dial the external number and press
Replace the handset to finish procedure
When an external line becomes free you will be called back (recall
ringing signal). You have to answer within eight seconds,
otherwise the Callback service is cancelled.
Lift the handset when you are called back
The system calls the external number.
Note: Only one Callback can be activated on a busy
external line. Callbacks from additional lines will recall on
the Access 1 line.
Cancel any single callback
#37*
Press and dial the extension number
Note: To cancel a single Callback on a specific external
line, dial the digit or digits to get a line instead of the
extension number.
#
Press
Cancel all callbacks
#37#
Press
Press
18
Dialog 3213
When You Receive a Busy Tone
Activate call waiting
If you urgently wish to contact a busy extension or external line,
you can notify it by a call waiting signal.
5
Press
Notes:
- You can also press: CAW (see display) or Call waiting
(function key pre-programmed by you).
- France and Finland-press 6; Sweden-press 4
Keep handset off-hook. When the called extension or the external
line becomes free, it will be called automatically.
Note: The call waiting function might be blocked for use on
your extension (programmed by system administrator).
If call waiting is not allowed you will continue to receive a
busy tone.
Intrusion on a busy extension
You can intrude on an ongoing call on a busy extension.
4
Press
Note:
- You can also press: INTR (see display) or Intrusion
(function key pre-programmed by you).
- France and Sweden-press 8
Before the intrusion is executed a warning tone is sent to the
parties in the ongoing call. A three party call is established and a
warning tone is heard.
Note: The Intrusion function might be blocked for use on
your extension (programmed by system administrator).
If Intrusion is not allowed you will continue to receive a
busy tone.
Dialog 3213
19
When You Receive a Busy Tone
Intrusion on a busy external line
You can intrude on an ongoing call on a busy external line.
*44*
Press and dial the individual external line number
#
Press and dial the digit or digits to get an external line
Busy tone.
4
Press
Notes:
- You can also press: INTR (see display) or Intrusion
(function key pre-programmed by you).
- France and Sweden-press 8
Before the intrusion is executed a warning tone is sent to the
parties in the ongoing call. A three party call is established and a
warning tone is heard.
Note: The Intrusion function might be blocked for use on
your extension (programmed by system administrator).
If Intrusion is not allowed you will continue to receive
busy tone.
20
Dialog 3213
Call Forwarding
Call Forwarding
Diversion
If you do not want to be disturbed or will be out of the office, you
can have all calls to your extension diverted to a pre-programmed
answering position. During diversion you will hear a special dial
tone and the diversion lamp indicates that your triple access line
is diverted. You can still make calls as usual.
Diversion can be direct, on no answer, on busy or to another
information service facility.
Note: If your telephone is programmed with ”Multiple
Directory Diversion and Do not disturb” (ask your system
administrator), Diversion is ordered and cancelled simultaneously on all lines.
Order direct diversion from your own extension
The call is diverted to an individual position or up to three predetermined common answering positions (depending on the type
of the incoming call). Programmed by the system administrator.
Diversion
Press
Note: Function key pre-programmed by system administrator.
If you order diversion with the handset off-hook or the loudspeaker on, press the diversion key twice. You can also use
the procedure below.
*21#
Press
Note: U.K.-press * 2 #
Press
Note: Diversion can also be ordered and cancelled from
the answering position, use the same procedure as in
section ”Internal follow-me”.
Dialog 3213
21
Call Forwarding
Cancel direct diversion from your own extension
Diversion
Press
Note: Function key pre-programmed by system
administrator. You can also use the procedure below.
#21#
Press
Note: U.K.-press # 2 #
Press
Note: Diversion can also be ordered and cancelled from
the answering position, use the same procedure as in
section ”Internal follow-me”.
Diversion when there is no answer
*211#
Press to order
Note: Finland and Norway-press * 6 1 #
The incoming call is diverted after 3 signals.
Press
#211#
Press to cancel
Note: Finland and Norway-press # 6 1 #
Press
22
Dialog 3213
Call Forwarding
Diversion when caller receives a busy tone
*212#
Press to order
Note: Finland and Norway-press * 6 7 #
Press
#212#
Press to cancel
Note: Finland and Norway-press # 6 7 #
Press
Diversion to another information service facility
*218#
Press to order
Press
#218#
Press to cancel
Press
Dialog 3213
23
Call Forwarding
Internal follow-me
All calls to your extension are diverted to an extension of your
choice (within the private network). During follow-me you will hear
a special dial tone and the diversion lamp indicates that your
triple access line has follow-me. You can still make calls as usual.
Note: If your telephone is programmed with ”Multiple
Directory Diversion and Do not disturb” (ask your system
administrator), Internal follow-me is ordered and
cancelled simultaneously on all lines.
Order from your own extension
Lift the handset
Diversion
Press and dial the answering position number
Note: Function key pre-programmed by system
administrator.
Diversion
Press to order
Replace the handset
Note: You can also use the procedure below.
*21*
Press and dial the answering position number
Note: U.K.-press * 2 * No.
#
Press
Cancel from your own extension
Diversion
Press
Notes:
- Function key pre-programmed by system administrator.
- You can also use the procedure below.
#21#
Press
Note: U.K.-press # 2 #
24
Dialog 3213
Call Forwarding
Redirect from answering position
*21*
Press and dial your own extension number
Note: U.K.-press * 2 * No.
*
#
Press and dial the diversion number
Press to redirect
Calls are diverted to the answering position.
Note: Internal follow-me must be ordered from your own
extension before you can redirect from answering position.
Cancel from answering position
#21*
Press and dial your own extension number
Note: U.K.-press # 2 * No.
#
Dialog 3213
Press
25
Call Forwarding
External follow-me
If external follow-me is allowed you can have all calls to your
extension diverted to an external number of your choice.
A special dial tone will be heard. You can still make calls as usual.
Order
*22#
Press and dial the digit or digits to get an external line and
the external number
#
Press
Cancel
Diversion
Press
Note: Function key pre-programmed by system
administrator. You can also use the procedure below.
#22#
Press
Press
Bypass diversion
If bypass diversion is allowed from your extension, you can
bypass an activated diversion/follow-me on a specific extension.
*60*
Press and dial the extension number
#
26
Press and wait for answer
Dialog 3213
Call Forwarding
Personal number (optional)
With this function you can be reached on your normal office telephone number even if you are in another room, out of the office,
at home, etc.
Depending on the functionality of your office exchange, you can
have either one individual single search profile or you can choose
between five individual search profiles. A search profile can be
designed to fit the situation, i.e. In the office, On travel, At home,
etc. Both internal or external telephone numbers can be used in
a profile.
On your request, the search profiles are programmed or modified
by the system administrator. See section “To design and order
your search profiles”.
When the function is activated, incoming calls are transferred to
different telephones or back-up services in your decided order.
If an answering position in the profile is busy, the call can be
transferred to another predefined position in the profile, i.e. Voice
mail or a colleague. You can activate the function from your own
office telephone or when out of the office, by using the Direct
Inward System Access function (DISA).
To activate or change to another profile from your
office telephone
*10*
(1-5)
#
Press
Dial the search profile digit
Press
The display shows the chosen search profile digit.
Note: If the operator is included in the activated profile
as an answering position, always inform the operator if
you are absent. Use the Absence information function or
call the operator. If Voice Mail is included in the activated
profile, always update your greeting with absence
information.
Dialog 3213
27
Call Forwarding
To cancel from your office telephone
#10#
Press
Press
To activate or change to another profile from an
external telephone
The external telephone must be of push button type provided
with hash (#) and star (*) keys or a mobile telephone adapted for
dial tone pulses (DTMF).
Call the DISA function at your office
Dial tone.
*75*
*
Enter the authorization code and press
#
Dial your own extension number and press
Dial tone.
*10*
*
(1-5)
#
Press
Press
Dial your own extension number and press
Dial the search profile digit
Press and replace the handset
Note: If the operator is included in the activated profile
as an answering position, always inform the operator if
you are absent. Use the Absence information function or
call the operator. If Voice Mail is included in the activated
profile, always update your greeting with absence
information.
28
Dialog 3213
Call Forwarding
To cancel from an external telephone
The external telephone must be of push button type provided
with hash (#) and star (*) keys or a mobile telephone adapted for
dial tone pulses (DTMF).
Call the DISA function at your office
Dial tone.
*75*
Press
*
Enter the authorization code and press
#
Dial your own extension number and press
Dial tone.
#10*
#
Press
Dial your own extension number and press
Replace the handset
To design and order your search profiles
The search profiles are installed or changed by the system
administrator. In order to set up your profiles, copy the setting
form, fill in your new or changed profiles and give it to your
system administrator.
Note: If Personal Screen Call Server is connected to your
system, you can edit the profiles via your Intranet. See
instructions for the server!
Important notes when designing your search profiles:
• Avoid a ringing time longer than 45 seconds for your profiles
Usually the caller hangs up after 3-6 ringing signals. If you need a
longer ringing time, the maximum time is 60 sec.
• Consider the time you need to react and answer on each
answering position in your profiles
You might need up to 15 seconds to react and answer on a desk
or cordless telephone and 20-25 seconds for a mobile telephone.
Dialog 3213
29
Call Forwarding
• There must be an answering position at the end of every profile
(voice mail or operator/secretary)
If not, calls might end up unanswered.
• Consider what should happen when you are busy on a telephone
The available options are:
• Activate Free on 2nd (if available)
• Diversion to Voice mail
• Diversion to the operator
• If an answering machine, a FAX or other answering service is used
as an early answering position, it might interrupt the searching
Disconnect the answering service, or design the ringing times so
they do not affect the searching.
• If your system admits just one single personal profile, design
the profile only with your 2-3 most frequently used positions
If you add more numbers, there is a risk that the caller hangs up
before a late position is called.
• If your system admits 1-5 personal profiles, design the different
profiles to fit your most used positions
Make sure you use as few answering positions as possible for
each profile. Profile examples:
• In office
• At home
• On travel
• Absent/not reachable
Example:
How to fill in your setting form for search profiles:
Profile 1
In office
Search Type of telephone or Telephone number Ringing time
order answering position*
(seconds)
1
2
3
Desk
Cordless
Voice Mail
1234
5234
10
15
* Examples: Desk, Cordless, Mobile, External, Voice Mail, Operator, etc.
Profile 2
At home
Search Type of telephone or Telephone number Ringing time
order answering position*
(seconds)
1
2
3
30
External
Mobile
Voice Mail
222222
0706666666
20
25
Dialog 3213
Call Forwarding
Setting form for search profiles
Name: ..............................................................
Telephone No:..................................................
Profile 1
Department: ......................
Account:............................
......................
Search Type of telephone or Telephone number Ringing time
order answering position*
(seconds)
1
2
3
4
* Examples: Desk, Cordless, Mobile, External, Voice Mail, Operator, etc.
Profile 2
......................
Search Type of telephone or Telephone number Ringing time
order answering position*
(seconds)
1
2
3
4
Profile 3
......................
Search Type of telephone or Telephone number Ringing time
order answering position*
(seconds)
1
2
3
4
Profile 4
......................
Search Type of telephone or Telephone number Ringing time
order answering position*
(seconds)
1
2
3
4
Profile 5
......................
Search Type of telephone or Telephone number Ringing time
order answering position*
(seconds)
1
2
3
4
Dialog 3213
31
Internal Messages
Internal Messages
Manual message waiting (MMW)
If the called extension does not answer you can initiate a message
waiting indication on that extension (if this function is allowed).
Answer
Message
Press
Note: Function key pre-programmed by system
administrator.
A call is initiated to the extension that requested message waiting.
Checking the party that requested MMW
Program
Message
Press
The program key lamp turns on and all other lamps turn off.
Press
Note: Function key pre-programmed by system
administrator.
The number that requested message waiting is shown in the display.
Program
Press to finish procedure
Cancel MMW at your own extension
#31#
Press
Press
32
Dialog 3213
Internal Messages
Order MMW to another extension
*31*
Press
Dial the extension number
#
Press
The message waiting key lights up on the called extension.
Cancel MMW to another extension
#31*
Press
Dial the extension number
#
Press
Message waiting (optional)
If assigned this function and your telephone is diverted to an
interception computer, a function key (programmed by the
system administrator) will flash when there are messages stored
for you in the computer. The messages will be printed out on a
printer connected to the computer.
To print out messages
Message
Press
The display shows the identity of the computer and the number
of messages stored for you.
If you find that the notification of message waiting is intrusive or
you want to shut off the notification:
#91#*
Dialog 3213
Press
Acknowledgement tone.
33
Voice Mail
Voice Mail
Integrated voice mail (optional)
This function allows you to leave a voice message to the caller
when you are unable to answer calls, e.g. when out of office, in a
meeting, etc. Then the caller can leave a message in your mailbox.
When back in office you can enter your mailbox and listen to
received messages.
You can choose to divert all incoming calls to your mailbox, or calls
when there is no answer, or calls when your telephone is busy.
When you enter your mailbox, you will hear recorded instructions
how to handle listening, recording, storing and deleting messages,
and how to change your security code.
To activate and deactivate your mailbox
For all incoming calls:
See Call Forwarding, section Internal Follow-me (function code 21).
Use the number to the voice mail system as the ”answering position
number”.
When incoming calls get no answer:
See Call Forwarding, section Diversion when there is no answer
(function code 211).
When incoming calls get a busy tone:
See Call Forwarding, section Diversion when caller receives a
busy tone (function code 212).
34
Dialog 3213
Voice Mail
To enter your mailbox
From your office telephone:
Dial the number to the voice mail system
Note: If a function key is programmed for your mailbox
and the key lamp is lit (= a new message is received),
you can also press this key.
If you are asked to enter your security code:
Enter your security code
Code at delivery = your extension number.
From another telephone:
Dial the number to the voice mail system
If you are asked to enter your security code (the used telephone
has a mailbox of its own):
#
Press
Enter your mailbox number
(normally your office extension number)
Enter your security code (if required)
To enter someone else´s mailbox
Dial the number to the voice mail system
If you are asked to enter your security code (the used telephone
has a mailbox of its own):
#
Press
Enter the mailbox number
(normally the office extension number of the person served)
Enter the security code of the person served (if required)
Dialog 3213
35
Voice Mail
To handle the mailbox
Recorded information on the line informs about the number of
new and stored messages. If you have too many messages
stored, you will first be asked to delete saved messages.
Recorded instructions ask you to press different digits in order to
listen to caller's messages, record your own greetings, change
your password or exit your mailbox, etc.
The following diagram gives an overview of the mailbox system
and the digits to be used.
Messages
Listen to the next message
Repeat the heard message
Start level
Delete the heard message
Return to start level
Exit the mailbox
Greeting
Listen to the current greeting
Record a new, end with
Listen to the recording
Leave the old greeting unchanged
Re-record the greeting
Store the greeting
Leave the old greeting unchanged
Security code
Enter a new code,1-6 digits
Only digits are allowed, no star ( )!
No security code
Repeat the new code
EXIT
36
Dialog 3213
Information
Information
Absence information (optional)
To be used during absence to inform callers about the reason
and time or date of your return. If you are authorized, you can
also enter absence information on another extension from your
own extension.
Order
Example:Back on September 15th (=0915).
*23*
(0-9)
Press
Enter the absence code
Note: The absence codes consist of one digit which
depends on the system connected to the exchange.
Contact your system administrator regarding your
available absence codes.
*0915
Press and enter the date (MMDD) or time (HHMM) of your return
Note: If no return time or date is needed, this step can
be excluded.
#
Press
The display shows the reason, and if entered, time or date of return.
Cancel
#23#
Press
Press
The programmed information is erased.
Dialog 3213
37
Information
Order for another extension
*230*
*
(0-9)
Press
Dial the extension number and press
Enter the absence code
*0915
Press and enter the date or time of the other person’s return
#
Press
The display on the other person's extension shows the reason,
and if entered, time or date of return.
Cancel for another extension
#230*
#
Press
Dial the extension number and press
Note: If the special dial tone is received, the authorization
code for the other extension is required. Add the code
and press # before pressing the Clear key.
Press
38
Dialog 3213
Abbreviated Numbers
Abbreviated Numbers
Common abbreviated numbers
By using abbreviated numbers, you can make calls simply by pressing
a few keys. The common abbreviated numbers consist of 1-5 digits
and are stored in the exchange (by the system administrator).
Lift the handset and dial the common abbreviated number
Individual abbreviated numbers
You can program up to ten frequently used telephone numbers
on the digit keys 0-9 and use them as individual abbreviated
numbers (if this function is allowed).
Note: In Finland up to nine numbers, keys 1-9.
To use
* * (0-9)
Press and dial the relevant digit
Note: Finland-press **(1-9); Sweden-press (0-9)#
Dialog 3213
39
Abbreviated Numbers
Program and alter individual abbreviated numbers
* 5 1 * (0-9)
Press and dial selected digit
Note: Finland-press *51*(1-9)
*
#
Press and dial the telephone number
Press
Note: The programmed number may consist of a
maximum of 20 digits plus a ”*”, which indicates the
second dial tone from the public network. The display
only shows the last 20 characters in a number.
Erase one programmed number
# 5 1 * (0-9)
Press and dial selected digit
Note: Finland-press #51*(1-9)
#
Press
Erase all programmed numbers
#51#
Press
Press
40
Dialog 3213
Abbreviated Numbers
Dial-by-name (optional)
By use of the Integrated Telephone Directory you can search for a
name, group, operator, etc. via your display and then call the
wanted person or group by use of a soft-key below the display.
DIR
Press (see display)
The display shows:
14:25
DEL
DEL
SP
SP
12FEB 2001
SRCH
EXIT
Press to delete the last entered character (see display)
Press to enter a space (see display)
SRCH
Press to search using the entered characters (see display)
EXIT
Press to return to the previous menu (see display)
Use the key pad to enter the characters of the name.
The characters above the keys show the key to be pressed.
Example:
Select characters by pressing digits repeatedly. The cursor is
moved automatically when you stop pressing.
ABC
Press a
1 time
2 times
3 times
digit
result A
result B
result C
When the requested character is shown on the display, wait for
the cursor to move to the next place.
The name must be entered as follows:
Family name - Space - Name
It is not necessary to enter all the characters, just as many to get
as close as possible to the requested name when you start to
search.
Note: If you want to specify the person’s first name, you
must enter the full family name before you can enter a
space.
Dialog 3213
41
Abbreviated Numbers
Example:
To search for Bob Smith:
7777
Press for S
6
Press for m
444
Press for i
The display shows:
14:25
SMI
DEL
SRCH
SP
12FEB 2001
SRCH
EXIT
Press to search (see display)
If SMI was sufficient to find Bob Smith, the display shows:
SMITH BOB
UP
54321
DOWN
DIAL
EXIT
If SMI gives a name close to Bob Smith, e.g. Ann Smith, scroll
down until you find the requested name.
UP
Press to scroll up trough the name list (see display)
DOWN
Press to scroll down trough the name list (see display)
DIAL
Press to dial the number displayed (see display)
BACK
Press to return to the previous menu (see display)
If there is additional information in the directory for the name
being displayed, this is shown under the name, e.g. company,
country, etc.
The display will inform if no name matches your search and show
the name alphabetically preceding the entered one.
42
Dialog 3213
Abbreviated Numbers
Dial by a function key
Press the function key
Head office
Program
Both telephone numbers and function codes can be
programmed on a function key.
Program
Press
Press the selected function key and dial the telephone
number or function code
Press the function key again
Program
Press to finish programming
Assign the key.
Verify and erase programmed number
Program
Press
Press the selected function key
The stored number is shown on the display.
Press if you want to erase the stored number
The stored number is erased.
Program
Dialog 3213
Press
43
Call Metering
Call Metering
Charging information
Charging information for your call can be shown in the local
currency in the display.
COST IN £
ETE
COST
14:25
3.25
12FEB 2001
COST
2222
TIMER
Press to display or hide the cost indication (see display)
Note: The cost indication is automatically displayed for
all charged calls, when the function is activated.
Timer
You can measure the elapsed time of your call.
14:25
START
RST
12FEB 2001
DATE
2222
EXIT
TIMER
Press to activate the timer (see display)
START
Press to start the timer function (see display)
The display changes and the elapsed time is shown.
STOP
Press to stop the timer function (see display)
EXIT
Press to exit the timer function (see display)
Note: Timer can be activated when your telephone is
idle, ready for dialling, during an outgoing call or when in
speech connection.
44
Dialog 3213
Call Metering
Other functions
These functions are also available, during timer mode:
DATE
Press to show date (see display)
TIME
Press to display time measurement (see display)
RST
Dialog 3213
Press to clear time measurement (see display)
45
Group Facilities
Group Facilities
Call pick-up group
People working in a team can have their telephones programmed
by the system administrator to form Call Pick-up groups.
In a Call Pick-up group, any member can answer any individual
call to group members.
8
Press to answer
Notes:
- You can also press PICK (see display).
- Finland and Sweden-press 0
- One Call Pick-up group can serve as an alternative to
another group. Calls to the alternative group can only
be answered when there are no calls to your own group.
Common bell group
Calls are signalled on a common bell.
8
Press to answer
Notes:
- You can also press PICK (see display).
- Finland and Sweden-press 0
46
Dialog 3213
Group Facilities
Group hunting
As a member of a group of extensions that is called by a
common number, you can temporarily leave the group.
*21*
Press and dial your own extension number
Note: U.K.-press * 2 * No.
#
Press
To re-enter the group
#21#
Press
Note: U.K.-press # 2 #
Press
Dialog 3213
47
Other Useful Facilities
Other Useful Facilities
Account code (optional)
This function is used to charge a call to an account number or to
prevent unauthorised calls from your telephone. The account
code can have 1 to 15 digits.
*61*
Press
Note: Finland and Norway-press * 7 1 *
#
Enter the account code and press
Dial tone.
Note: You can also press ACO (see display), enter the
account code and press ENTER (see display).
Dial the digit or digits to get an external line and the
external number
Ongoing external call
When used to charge a call it is also possible to connect an
ongoing external call to an account code. During the call:
Access
*61*
Press the line key to put the ongoing call on hold
Press
Note: Finland and Norway-press * 7 1 *
#
Enter the account code and press
Dial tone.
Note: You can also press ACO (see display), enter the
account code and press ENTER (see display).
Access
48
Press the line key for the call put on hold
Dialog 3213
Other Useful Facilities
Immediate speech connection
You automatically answer a call without lifting the handset or
pressing any keys. The function can be permanently active or
activated by use of a function key (programmed by system
administrator).
Permanently active
Program the ringing option with ”Immediate speech connection
with single tone burst”, option 6, on the Access line key.
See section ”Programming”.
Activated on a function key
Automatic answer
Press to order or cancel
Note: Function key pre-programmed by system administrator.
The incoming call is signalled with a tone burst. When the key
lamp is lit you can use this function.
General cancellation
The following features can be simultaneously cancelled:
•
•
•
•
•
Callback (all Callbacks are cancelled).
Diversion/Internal and External Follow-me.
Manual message waiting/Message diversion.
Do not disturb.
Flexible night service.
Order
#001#
Press
Press
Dialog 3213
49
Other Useful Facilities
Night service
When the exchange is in night service mode, all your incoming
calls to the operator are transferred to a selected extension or
group of extensions. The exchange is equipped with four different
night service modes:
Common night service
All incoming calls to the operator are transferred to one specific
extension. Answer the call in the normal way.
Individual night service
Selected external calls to the operator are transferred to one
specific extension. Answer the call in the normal way.
Universal night service
All incoming calls to the operator are transferred to a universal
signalling device, e.g. the common bell. Answer the call as
descibed in section ”Common bell group”.
Flexible night service
This function permits you to order an external line and connect it
directly to your telephone. Ask your operator for the external line
numbers.
To order flexible night service
*84*
*
#
Press and dial the digit or digits to get a line
Press and dial the external line number
Press
Cancel
#84#
Press and dial your own extension number
Press
50
Dialog 3213
Other Useful Facilities
Hot line
Ask your system administrator if you require this function.
Delayed hot line
When the handset of the delayed hot-line telephone is lifted or
when the line key is pressed, a timer is started. If no digit is
pressed before time out, a call is automatically generated to a
specific extension or external line. If a digit is pressed before time
out the telephone works as an ordinary telephone.
Note: This function is only available in newer versions of
the telephone exchange.
Direct hot line
The same function as described above, but no delay. Only hot
line calls can be placed from this line. To be used e.g. as alarm
phone, door phone etc.
Alarm extension
An extension can be programmed by system administrator as
an alarm extension. A call to an alarm extension obtains automatic
intrusion if the extension is busy. Up to seven calling parties may be
connected at the same time.
Emergency state
In the event of an emergency the operator can switch the
exchange into emergency state, during which only
pre-programmed extensions are permitted to make calls.
Data communication
Your telephone can be used together with a PC as an integrated
voice and data terminal. Contact your system administrator if you
require this function.
Dialog 3213
51
Other Useful Facilities
Additional directory number
You can be assigned (programmed by system administrator) one
or more additional directory numbers (lines) on free function keys.
To answer, make calls and use functions on the additional directory
lines, use the same procedure as for triple access lines if nothing
else is stated. However, you have to press the additional line key
after lifting the handset.
Example:
To make a call on an additional directory line:
Lift the handset
Additional line
Press
Note: Function key pre-programmed by system administrator.
Dial the extension number
Multiple represented directory number
Your extension number can be multiple represented on other
digital system telephones, i.e. the number is represented as a key
on these telephones. Your incoming calls can be answered on
any of these telephones by just pressing your dedicated key.
In idle state this key can be assigned to call your number by just
pressing the key. Contact your system administrator if you require
this function.
52
Dialog 3213
Other Useful Facilities
Malicious call tracing
If you are disturbed by malicious external incoming calls, you can
request a number tracing from the network provider.
You can invoke tracing during or after an ongoing conversation.
The external line can be held for a limited period of time.
Order
During an ongoing conversation:
*39#
Press
Note: You can also press MCT (see display) or Mal. Call
Tracing (function key pre-programmed by system
administrator).
The system acknowledges with different tones whether the
tracing request was accepted or rejected.
Headset
If your telephone is equipped with Option unit DBY 410 02, the
following headset functions are available.
Note: How to install Option unit and headset, see
installation instruction provided with the Option unit.
Activate/Deactivate the headset
Headset
Press the headset key to activate/deactivate the headset
Note: Function key pre-programmed by system administrator.
See section ”Desciption”. All calls can be handled via the headset.
Answer calls
Press the flashing line key to answer
Press to terminate a headset call
Dialog 3213
53
Other Useful Facilities
Make calls
Dial the number
Press to terminate the call
Headset to handset
Lift the handset
Handset to headset
Headset
Press the headset key
Note: Function key pre-programmed by system administrator.
Headset with loudspeaking
Press to toggle between headset with or without loudspeaking
Headset to handsfree
Press
Headset
Press the headset key
Note: Function key pre-programmed by system administrator.
Handsfree to headset
Headset
Press the headset key
Note: Function key pre-programmed by system administrator.
54
Dialog 3213
Other Useful Facilities
Direct Inward System Access (DISA) (optional)
If you are assigned to use this function and you are working
externally, you can call your office and get access to an external
line in order to make business calls. The business call will be
charged your office extension number or an account number.
You will just be charged for the call to the office.
The external telephone must be of push button type provided
with hash (#) and star (*) keys or a mobile telephone adapted for
dial tone pulses (DTMF).
After a completed DISA call you must hang up before a new
DISA call can be made.
Depending on the type of authorization code and if an account
code is used, different procedures must be used:
With common authorization code
Call the DISA function at your office
Dial tone.
*72*
#
Press
Enter the authorization code and press
Dial tone.
Dial the external number
With individual authorization code
Call the DISA function at your office
Dial tone.
*75*
Press
*
Enter the authorization code and press
#
Dial your own extension number and press
Dial tone.
Dial the external number
Dialog 3213
55
Other Useful Facilities
Name and number log (optional)
With this function all unanswered calls to your telephone will be
logged. By use of the soft keys under the display you can browse
the log, make calls to logged numbers and delete logged numbers.
A function key must be programmed by the system administrator.
The key lamp is switched on and will flash when new unanswered
calls have been logged, since last time the key was activated.
Your telephone must be idle and unlocked to be able to browse
the log.
To browse the number log
Press
Number log
Note: Function key pre-programmed by system
administrator.
The key lamp is switched off and the display shows the number
of stored numbers, time, date, name and number of the last
unanswered call:
STORED NUMBERS: 2
14:25
12FEB 2001
BOB SMITH
NEXT
DEL
DIAL
NEXT
DEL
56
12345
EXIT
Press to show the next logged number (see display)
Press to delete the displayed number (see display)
DIAL
Press to call the displayed number (see display)
EXIT
Press to exit (see display)
Dialog 3213
Paging
Paging (optional)
Persons equipped with a wireless paging receiver or assigned to
a lamp signal, can be paged from a telephone set. Depending on
the type of paging system it is possible to send digit messages or
voice messages to the paged person.
Paging can also be initiated and answered during an ongoing
call. Make an Inquiry call and proceed according to the
appropriate procedure for the type of connected paging system.
You can then either return to the ongoing call or transfer the
paging call to the person that was put on hold. If this person is
an external subscriber, your exchange must be programmed for
this function.
If you receive a congestion tone when paging, this indicates that
the paged person has his paging receiver in the charging rack
and is probably out of the office.
Paging receivers without a display and paging
via lamp signals
To initiate
When there is no answer or a busy tone, keep the handset off hook:
7
Press
Wait for an answer with the handset off hook.
If you want to start paging without calling the person:
*81*
#
Dialog 3213
Press
Dial the extension number and press
Wait for an answer with the handset off hook.
57
Paging
To answer
From any telephone within the system and within the
predetermined paging time:
*82*
#
Press
Dial your own extension number and press
Or if only one paging call is permitted at the time:
*82#
Press
Paging receivers with a display
To initiate
When there is no answer or a busy tone, keep the handset off hook:
7
Press and replace the handset
Wait for the paged person to call back.
If you want to start paging without calling the person:
*81*
#
Press
Dial the extension number and press
Wait for the acknowledgement tone.
Replace the handset
Wait for the paged person to call back.
58
Dialog 3213
Paging
If you want to send a digit message code:
*81*
Press
*
Dial the extension number and press
#
Dial the message code (1-10 digits) and press
Wait for the acknowledgement tone.
Replace the handset
If expected, wait for the paged person to call back.
To answer
From the nearest telephone within the system: Call the extension
number shown in the display of your paging receiver. If zeros are
shown it indicates that you are being paged from an external
subscriber. To answer:
*82*
#
Press
Dial your own extension number and press
Or if only one paging call is permitted at the time:
*82#
Dialog 3213
Press
If a message code is shown in the display, take the appropriate
action.
59
Paging
Paging receivers with voice message
To initiate
When there is no answer or a busy tone, keep the handset off hook:
7
Press
Leave your message after the tone. Just before the predetermined
speech time is ended, a warning tone will be heard.
If you want to start paging without calling the person:
*81*
#
Press
Dial the extension number and press
Leave your message after the tone. Just before the predetermined
speech time is ended, a warning tone will be heard.
To answer
If your paging receiver has bothway voice connection, press
the answer button to speak. If no bothway connection exists,
take the appropriate action according to the message or answer
the paging in the same way as paging without a voice message.
60
Dialog 3213
Paging
Alarm paging
To initiate
*810*
#
Press
Dial the extension number and press
Wait for the acknowledgement tone.
Replace the handset
If you want to send an alarm message code:
*810*
Press
*
Dial the extension number and press
#
Dial the message code (1-5 digits) and press
Wait for the acknowledgement tone.
Replace the handset
To acknowledge an alarm
You must acknowledge the alarm to be terminated:
*820*
#
Press
Dial your own extension number and press
To acknowledge an alarm for another extension:
*820*
Dialog 3213
Press
*
Dial the other extension number and press
#
Dial your own extension number and press
61
Authority
Authority
Data privacy
Data privacy allows you to make a call without any disturbances, i.e.
intrusion. This function is automatically cancelled when the call is finished.
Order
Lift the handset
*41#
Press and dial the number
Do not disturb, DND
When you activate DND, calls to your extension are not indicated.
Outgoing calls can be made as usual.
DND
Press to activate or deactivate DND (see display)
Note: You can also press DND (function key pre-programmed
by system administrator) or use the procedure below.
*27#
Dial to activate
Special dial tone.
or
#27#
Dial to deactivate
Press to finish activation/deactivation
Note: If your telephone is programmed with ”Multiple
Directory Diversion and Do not disturb” (ask your system
administrator), DND is ordered and cancelled simultaneously on all lines. (This function is only available in newer
versions of the telephone exchange).
62
Dialog 3213
Authority
Group do not disturb
If your extension is defined as a master extension (programmed
by system administrator), you can mark a group of extensions as
Group do not disturb. The group can be bypassed by you.
Order
*25*
Press and dial the group number
Note: Germany and South Africa-press * 2 8 * No.
#
Press
Special dial tone.
Press
Cancel
#25*
Press and dial the group number
Note: Germany and South Africa-press # 2 8 * No.
#
Press
Bypass
*60*
Press and dial the extension number
#
Dialog 3213
Press
The call is made to the specified extension in the group.
63
Authority
Authorization code, common (optional)
If you are assigned to use a common authorization code (1 to 7
digits) you can temporarily change any used telephone within the
exchange to the authority level connected to this code. You can
use the code for one call only or you can open the phone for
some calls and lock it when leaving the phone.
To use for a single call
*72*
#
Press
Enter authorization code and press
Verification tone.
Note: You can also press AUTH (see display), enter the
code and press ENTER (see display).
Dial the digit or digits to get an external line and the
external number
To open an extension for some calls
#73*
#
Press
Enter authorization code and press
Verification tone.
Note: You can also press OPEN (see display), enter the
code and press ENTER (see display).
To lock an extension
*73*
#
Press
Enter authorization code and press
Verification tone.
Note: You can also press LOCK (see display), enter the
code and press ENTER (see display).
64
Dialog 3213
Authority
Authorization code, individual (optional)
If you are assigned to an individual authorization code (1 to 7
digits, affiliated to your own extension) you can lock your own
extension to a common authority level, e.g. when out of the
office. You can also temporarily change any other used telephone
within the exchange to the same authority level as you have on
your own phone.
The individual code can be changed from your own extension.
To lock your telephone
*76*
#
Press
Enter authorization code and press
Verification tone.
Note: You can also press LOCK (see display), enter the
code and press ENTER (see display).
To make calls with your authority level when your
telephone is locked
*75*
#
Press
Enter authorization code and press
Verification tone.
Note: You can also press AUTH (see display), enter the
code and press ENTER (see display).
Dial the digit or digits to get an external line and the
external number
Dialog 3213
65
Authority
To open your telephone
#76*
#
Press
Enter authorization code and press
Verification tone.
Note: You can also press OPEN (see display), enter the
code and press ENTER (see display).
To assign your own authority level to another telephone
*75*
*
Press
Enter authorization code and press
Verification tone.
Note: You can also press AUTH (see display), enter the
code and press ENTER (see display).
#
Dial your own extension number and press
Verification tone.
Dial the digit or digits to get an external line and the
external number
To change your individual authority code
*74*
66
Press
*
Enter old authorization code and press
#
Enter new authorization code and press
Verification tone.
Dialog 3213
Programming and Adjustments
Programming and Adjustments
Programming of functions
Frequently used functions and telephone numbers can be
programmed on the function keys for easy access. When you
want to use the function, just press the key. Certain functions
must be pre-programmed by the system administrator.
Program or change a function
Program
Press
Press selected function key
Note: If the key is already programmed, the number or
function will be displayed.
Enter telephone number or a function code according to
the list on the next page
Note: If a wrong number is entered, press the Clear key
to erase it, and then enter the number again.
Press the function key again
Program
Press to finish programming
Remove the transparent cover and write the function name or
telephone number beside the key.
Note: To erase a programmed function, press the Clear
key, instead of the telephone number or function code, in
the sequence above.
Dialog 3213
67
Programming and Adjustments
Verify a programmed number or function
Program
Press
Press selected function key
The stored number or function is displayed.
Program
Press
Functions and required data
Function
Function code or Associated number
Most
common
Finland
France
Sweden
4
6
6
4
4
6
Call pick up:
Group
Individual
Call waiting
On hold, common
Conference
Dial by a function key
Extension No.
Flexible night service
* 8 4 * 0 * + External line number + #
Intrusion on busy
extension
4
8
No. + 8
5
8
3
6
No. + 4
No. + 6
8
8
Functions that need to be programmed by the system
administrator:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
68
Additional lines
Automatic callback
Dedicated intercom link
Diversion
Do not disturb
External line
Free on 2nd access
Immediate speech connection
Individual external line
Last external number redial
Malicious call tracing
Manual message waiting
Multiple representation
Name and number log
Dialog 3213
Programming and Adjustments
Programming of ringing signals
You have 6 programmable ringing signals on your telephone.
The different signals can be programmed on access lines,
additional lines and multiple represented lines.
Program
Press
Access 1
Press the corresponding line key
A digit (0-6) is shown in the display.
(0-6)
Select the ringing signal you want to use according to the
list below
0 = Silent.
1 = Periodic ringing signal.
2 = Delayed periodic ringing signal.
3 = One muted ringing signal.
4 = One muted delayed ringing signal.
5 = Immediate speech connection with single tone burst
controlled by function key.
6 = Immediate speech connection with single tone burst.
Note: Options 5 and 6 are not available for multiple
represented lines.
Access 1
Press
Program
Press to finish programming
Press to clear the display during programming
To verify a ringing signal
Dialog 3213
Program
Press
Access 1
Press the corresponding line key
A digit (0-6) is shown in the display.
Program
Press to finish programming
69
Programming and Adjustments
Programming of ringing signal tone character
There are 10 different programmable ringing signal tone characters on
your telephone, each corresponding to a digit between 0 and 9.
Note: If you use melodies to signal incoming calls, this will
replace the tone character. See section "Melody ringing".
Program
(0-9)
Program
Press
The current tone character is displayed.
Press the corresponding digit
The telephone rings with the chosen character.
Press to finish programming
Handset and loudspeaker volume
Use the volume keys to change the volume of the handset or
loudspeaker during a call. Adjust handset listening volume in
handset mode. Adjust loudspeaker volume in monitor mode.
Press to change the volume
Ringing signal volume
Use the volume keys to adjust the ringing signal volume
when the telephone is idle or ringing. Adjusted volume is stored.
Press to change the volume
70
Dialog 3213
Programming and Adjustments
Mute ringing signal
You can supress the ringing signal for an incoming call.
Note: This function is only available in newer software
versions of your telephone. If the Mute key lamp is turned
on when you press the key in idle state, your telephone
supports this function.
Press to supress the ringing signal
The ringing signal is switched off for the current call.
Silent ringing
If you do not want to be disturbed by the ringing signal but still
want to be able to answer an incoming call, you can switch off
the ringing signal. Incoming calls are only indicated by a flashing
access line lamp and display information.
Note: This function is only available in newer software
versions of your telephone. If the Mute key lamp is turned
on when you press the key in idle state, your telephone
supports this function.
Press to switch off the ringing signal
The Mute key lamp is switched on to indicate silent ringing.
The ringing signal will automatically be switched on the next time
you lift the handset or press any key.
Dialog 3213
71
Programming and Adjustments
Melody ringing
If you want personal melodies when your telephone rings, you can
program one melody to signal an internal call, a second melody for
an external call and a third melody to signal a callback call.
Note: This function is only available in newer software
versions of your telephone. If you can enter “Melody
mode”, your telephone supports this function.
*7
Press and hold simultaneously to enter melody mode
Melody Mode
If there is a stored and activated melody for internal calls (Access
1 key), external calls (Access 2 key) or callback calls (Inquiry key),
the corresponding key lamp is switched on.
In melody mode you can:
• Program new melodies
• Edit or delete stored melodies
• Activate or deactivate stored melodies
#
Press to exit melody mode
Note: If you do not press any key within 30 seconds,
melody mode is automatically cancelled.
Program a new melody, edit or delete a current melody
Program
Press
Program Melody
72
Dialog 3213
Programming and Adjustments
Press the key for the requested type of call:
If there is a current melody, the melody is played and the last 19
notes or signs are displayed.
Access 1
Press for internal calls
or
Access 2
Press for external calls
or
Inquiry
Press for callback calls
To edit the current melody:
Move the cursor to the right of the position to be edited
Keep pressed to go to the beginning or to the end.
Press to erase the note to the left of the cursor
Keep pressed to erase all the notes.
To enter a new melody or new notes, see section “To enter notes”.
To store the current melody:
Press the flashing line key (Access 1 or Access 2 or Inquiry)
Program
Press
The current melody is stored.
Note: The melody is not activated, see section “Activate or
deactivate a stored melody”.
To delete the current melody:
Press and hold until no notes are displayed
Press the flashing line key (Access 1 or Access 2 or Inquiry)
Program
Dialog 3213
Press
73
Programming and Adjustments
Activate or deactivate a stored melody
A stored melody has to be activated in melody mode to be heard
when you get an incoming call.
To activate (in melody mode):
Press the key for the requested type of call (Access 1 or
Access 2 or Inquiry)
The corresponding key lamp is switched on:
Access 1 key = Internal calls
Access 2 key = External calls
Inquiry key = Callback calls
Note: If you want to return to an ordinary ringing singnal
but keep the melody stored, just press the key for the
requested type of call again. When key lamp is off the
stored melody is deactivated.
#
Press to exit melody mode
To enter notes
In melody mode, the keypad is used to enter notes, pauses, etc.
A maximum of 40 notes can be programmed for incoming calls,
and 20 notes for recalls.
1c 2 d 3 e
4f 5g 6a
7 b 8 +c 9 +d
*
0
#
74
This is how the keys are used:
Press to insert notes (1-9)
Note: A short press gives a short note, a long press gives
a long tone (displayed by a capital letter), +c and +d means
the higher octave.
Press to insert a short pause (p)
Hold to get a long pause (P). Repeat to get a longer pause (pp...p).
Press to get a higher octave for the inserted note
A + is shown in front of the note to indicate the higher octave.
Example: 30 to get +e
Press to increase or decrease the pitch for the inserted note
Press once for sharp pitch, twice for flat pitch and three times to
get the normal pitch.
Dialog 3213
Programming and Adjustments
Press to move the cursor to the left or to the right
Keep pressed to go to the beginning or to the end.
Press to listen to the entered notes
Press to erase the note to the left of the cursor
Keep pressed to erase all the notes.
Melody example:
James Bond theme programmed for Internal calls:
C d d D D pp C C C C #d #d #D #D pp D D D ##A G pppp G F G
12222**111
12#2#2#2#
**2226##5
****545
Enter the notes
Grey digit = Long press.
Note: The # key (to get a sharp or flat tone) is pressed
after the note, but is displayed before the note.
When the first 19 positions are entered, the display shows (only
last entered 19 positions can be shown):
Program Intern
CddDDppCCCC#d#d#D#D<
When all the notes are entered, the display shows (only last
entered 19 positions are shown):
Program Intern
#D#DppDDDbAGppppGFG<
Note: The flat A (##A) is shown as bA, i.e. b is used to
show both the note b and the flat sign.
Dialog 3213
75
Audible Signals
Audible Signals
The following different tones and signals are sent from the
exchange to your telephone.
Tone characteristics
The tones shown in this section are the most used tones
worldwide. Many markets use a differing tone for one or more
situations. If you get a tone that is not described or you cannot
identify, ask your system administrator.
Dial tone
Special dial tone
Ringing tone or
Queue tone
every 4th second
Busy tone
Congestion tone
Number unobtainable
tone
Call waiting tone
Intrusion tone *
Conference tone
every 15th second (to all parties)
Verification tone
Warning tone,
expensive route
* Intrusion tone is only available on newer versions of the telephone exchange.
76
Dialog 3213
Audible Signals
Ringing signals
Three different ringing signals inform you about the type of the
incoming call. The signals shown in this section are the most
used signals worldwide. Many markets use signals that are
adapted for the local standards. If you get a signal that is not
described or you cannot identify, ask your system administrator.
Internal ringing signal
External ringing signal
Recall signal
(automatic callback
reminder)
Dialog 3213
77
Visible Signals
Visible Signals
Lamp indications
78
Extinguished lamp
The function is not active.
Steady light
Function is active or supervised
line is busy.
Slowly flashing lamp
The line (or function) is put on hold.
Rapidly flashing lamp
An incoming call.
Light with short breaks
Ongoing call.
Dialog 3213
Display Information
Display Information
The display gives you feedback information such as time and
date, traffic state and connected telephone numbers. The following
displays show examples of the different states your telephone is in.
Idle telephone
When your phone is idle, the upper line shows general information.
The middle line shows your extension number. The lower line
presents lead texts for the soft keys.
14:25
OPEN
ACC
12FEB 2001
AUTH
2222
TIMER
Outgoing call
When you make an outgoing call on your telephone, the middle
line shows both the traffic state and dialled number.
14:25
12FEB 2001
CALLING
CAB
3333
TIMER
If the called party´s telephone is diverted, the middle line shows
the diversion information.
14:25
33333 DIV DIR.
CAB
12FEB 2001
55555
TIMER
The dialled number (3333) is directly diverted to number 5555.
Dialog 3213
79
Display Information
Incoming call
When you receive an incoming call the middle line flashes the
calling party´s extension number.
14:25
12FEB 2001
33333
If a diverting extension is calling, the middle line shows the
diversion information. The calling party´s number is flashing.
14:25
12FEB 2001
44444 DIV DIR.
22222
Number 22222 has dialled number 44444 and the call is directly
diverted to you.
80
Dialog 3213
Display Information
Soft keys
The soft keys are used to access different functions. Depending
on which traffic state and category of extension, the available
functions change.
The following abbreviations are used for the soft keys:
ACC
AUTH
CAB
CAW
CONF
COST
CUP
DATE
DEL
DIAL
DOWN
DND
ETE
EXIT
INTR
LNR
LOCK
MCT
NEXT
OPEN
PAG
PICK
RST
SP
SRCH
START/STOP
TIME
TIMER
UP
Dialog 3213
Account code
Authorization code
Callback
Call waiting
Conference (only shown when there is a party put on hold)
Display charging information
Call pick-up
Show date
Delete
Call the number displayed
Scroll down
Do not disturb
Dialling during a connected call (Push button tones, DTMF)
Exit the displayed menu
Intrusion
Last number redial
Lock the telephone
Malicious call tracing
Show next logged number
Unlock the telephone
Paging
Group call pick-up
Reset time measurement
Enter a space when writing names
Search
Start/Stop time measurement
Display time measurement
Timer
Scroll up
81
Display Information
Choice of language (optional)
One of the following languages can be chosen to be used for the
display information on your telephone.
Digit 0-9 = the language code:
0 English 1 French 2 German 3 Spanish 4 Italian
5 _______ 6 _______ 7 _______ 8 _______ 9 _______
Note: By default 5-9 are programmed for English. To be
changed locally to other languages.
To choose a language
*08*
(0-9)
#
82
Press
Enter the language code
Press
Dialog 3213
Option Unit/Vocabulary
Option Unit/Vocabulary
Option unit
The Option unit DBY 410 02 is an optional accessory, to be
installed under your telephone set. The following devices can be
installed via the Option unit:
•
Tape recorder
•
Extra bell or busy signal outside your door
•
Headset or conference unit
Note: Regarding the headset functions see section
”Other useful facilities”.
•
Second handset
Note: For people with impaired hearing the Option unit
offers the possibility to amplify the receiving volume in the
handset and headset.
Vocabulary
Additional lines
Idle message
Multiple
represented line
Triple access line
Dialog 3213
One or more additional extension numbers can be assigned to
your telephone, these are programmed on free function keys.
A message shown in the display when the telephone is idle.
This message is programmed by your system administrator.
Your extension number can be represented on a function key
on other extensions (two or more).
A collective name for the Access 1, Access 2 and Inquiry
lines. Access 1 and Access 2 forms your extension number
and are available both for incoming and outgoing calls.
Inquiry can only be used for outgoing calls.
83
Installation
Installation
Install stand and adapt telephone
Press to decrease angle
Pull to increase angle
Tiltable display
Adjustable angle
84
Dialog 3213
Installation
5
Install cables
4
2
4
4
124,2 mm
1
3
1
2
3
4
5
Cable to handset
Cable to exchange
Space for personal directory list(optional)
Wallmounting screw holes
Template holes for wallmounting of telephone (copy this page).
5
54 mm
53,8 mm
Wall mounting handset hook
5
Dialog 3213
85
Installation
Install keypanel
4
3
1
2
4
1
2
3
4
86
Remove the small plastic plate, marked DSS, i.e.
with a screwdriver and connect the cable
Attach key-panel unit
Secure with screws
Install stand
Dialog 3213
Labels
Labels
Copy these labels and use the copies for your own labelling.
Dialog 3213
MD110
Program
•
Menu
•
•
•
•
•
Dialog 3213
Transfer
•
Inquiry
•
Access 2
•
Access 1
•
87
Index
Index
Abbreviated numbers 39
Absence information 37
Account code 48
Additional directory number 52
Alarm extension 51
Alarm paging 61
Answer calls 6
Audible signals 76
Authority 62
Authorization code, common 64
Authorization code, individual 65
Automatic callback 17
Busy extension or external line 17
Bypass diversion 26
Call forwarding 21
Call metering 44
Call pick-up group 46
Call waiting 19
Charging information 44
Choice of language 82
Common abbreviated numbers 39
Common bell group 46
Conference 14
Data communication 51
Data privacy 62
Description 4
Dial by a function key 43
Dial-by-name 41
Dialling during a connected call 16
DISA 55
88
Display information 79
Diversion 21
Do not disturb, DND 62
DTMF signals 16
During calls 11
Conference 14
Conversation via the handset 12
DTMF signals 16
Handsfree conversation 12
Handsfree to loudspeaking 11
Hold 15
Inquiry 13
Loudspeaking to handsfree 11
Microphone on or off 12
Send caller´s identity code 16
Transfer 14
Emergency state 51
External follow-me 26
Functions and required data 68
General cancellation 49
Group do not disturb 63
Group facilities 46
Group hunting 47
Group listening (loudspeaking) 11
Handset and loudspeaker volume 70
Handset to handsfree 12
Handsfree to handset 12
Headset 53
Hot line 51
Immediate speech connection 49
Dialog 3213
Index
Incoming calls 6
Answer a second call 7
Handsfree 6
On Access 1 6
On another extension 7
On any other line key 6
Individual abbreviated numbers 39
Information 37
Inquiry 13
Installation 84
Integrated voice mail 34
Internal follow-me 24
Internal messages 32
Intrusion on a busy extension 19
Labels 87
Lamp indications 78
Language 82
Mailbox 36
Make calls 8
Malicious call tracing 53
Manual message waiting (MMW) 32
Melody ringing 72
Message waiting 33
Messages 32
Multiple represented directory number 52
Mute 12
Mute ringing signal 71
Name and number log 56
Night service 50
On hold 15
Option unit 83
Other useful facilities 48
Outgoing calls 8
External calls 8
Handsfree 9
Individual external line 9
Internal calls 8
Last external number redial 9
Save external number 10
Dialog 3213
Paging 57
Alarm paging 61
Paging receivers with a display 58
Paging receivers with voice message 60
Paging receivers without a display and
paging via lamp signals 57
Personal number 27
Programming and adjustments 67
Programming of functions 67
Programming of ringing signal tone
character 70
Programming of ringing signals 69
Put a call on hold 15
Redial number 9
Refer back 13
Ringing signal volume 70
Ringing signals 77
Send caller identity code at transfer 16
Setting form for search profiles 31
Short numbers 39
Silent ringing 71
Timer 44
Tone characteristics 76
Transfer 14
Visible signals 78
Vocabulary 83
Voice mail 34
Volume 70
When you receive a busy tone 17
Call waiting 19
Callback 17
Intrusion 19
89
Easy Guide
Copy this easy guide and put it in the optional pull-out leaf
underneath your telephone.
Note: This easy guide shows the most common function
codes. Differing codes for specific markets are not shown.
Easy Guide
Function
Automatic callback
Busy extension or no reply
Busy external line
Cancel all callbacks
Bypass diversion
Call pick-up
Common bell group
Group
Individual
Call waiting
Conference
Data privacy
Diversion
From your own extension
From answering position
On no answer
On busy
To other service facility
Do not disturb
Do not disturb, group
Bypass
Follow-me external
Follow-me internal
From your own extension
From answering position
General cancellation
Ind. abbreviated No.
To erase a No.
To erase all abbr. No.
To program & alter
Intrusion (extension)
Intrusion (external line)
Last external No. redial
Malicious call tracing
Manual message waiting
Night service
Flexible
Universal
On hold
Dialog 3213
Activate
Deactivate
6
6 external No. #
# 3 7 * extension No. #
# 3 7 * line digit #
#37#
* 6 0 * phone No. #
CUP or 8
CUP or 8
Extension No. CUP or 8
CAW or 5
CONF or 3
* 4 1 # phone No.
*21#
#21#
* 2 1 * own * new # # 2 1 * own #
*211#
#211#
*212#
#212#
*218#
#218#
DND or * 2 7 #
DND or # 2 7 #
2
5
group
No.
*
*
#
# 2 5 * group No. #
* 6 0 * extension No. #
* 2 2 # line digit
+ external No. #
#22#
* 2 1 * extension No. # # 2 1 #
* 2 1 * own * new # # 2 1 * own #
#001#
* * (0–9)
# 5 1 * (0–9) #
#51#
* 5 1 * (0–9) * phone No. #
INT or 4
* 4 4 * ind. external
line No. # line digit 4
***
*39#
* 3 1 * extension No. # # 3 1 #
* 8 4 * line digit *
external No. #
CUP or 8
CUP or 8
#84#
CUP or 8
Ericsson communications solutions
for enterprise networks combine and
improve advanced ways of exchanging
information via voice, data, video and
evolving future media.
This requires a true understanding of how
businesses and professionals interact—
an understanding that goes far beyond
meeting just the technological
requirements.
Our customers include owners of small to
large enterprise networks, local as well as
multinational. We also offer solutions for
Internet service providers.
We integrate computer and telephony
applications on the desktop. We enable
coordination of all business interactions
over the media of choice. In essence, we
help businesses forge enduring
relationships with customers.
Ericsson is the leading provider in the new
telecoms world, with communications
solutions that combine telecom and
datacom technologies with the freedom
of mobility for the user. With more than
100,000 employees in 140 countries,
Ericsson simplifies communications for its
customers - network operators, service
providers, enterprises and consumers the world over.
Ericsson Enterprise AB
All rights reserved.
For questions regarding the product,
please contact your Ericsson Enterprise Certified Sales Partner.
Also visit us on www.ericsson.com/enterprise
© Ericsson Enterprise AB 2001
EN/LZT 102 2553 RE
Subject to alteration without prior notice. Printed on chlorine free paper
We deliver quality of service over
converged networks. We provide staff
with full onsite and offsite mobility.
Download PDF

advertising