User guide | Ericsson Dialog 4425 IP Phone User Manual

Ericsson Dialog 4425 IP Vision
BusinessPhone Communication Platform
User Guide
Cover Page Graphic
Place the graphic directly on the page, do not care about
putting it in the text flow. Select Graphics > Properties
and make the following settings:
•
Width: 15,4 cm (Important!)
•
Height: 11,2 cm (May be smaller)
•
Top: 5,3 cm (Important!)
•
Left: -0,3 cm (Important!)
This text should then be hidden.
?
EN/LZTBS 180 345 R2A
© Ericsson Enterprise AB 2006
2
BusinessPhone – Ericsson Dialog 4425 IP Vision
Table of Contents
Table of Contents
Welcome .......................................................... 4
Description ....................................................... 8
Start the Phone – Log On/Off ......................... 19
Incoming Calls ............................................... 28
Outgoing Calls ............................................... 30
Call List .......................................................... 37
During Calls .................................................... 42
Call Forwarding .............................................. 48
Absence Information ...................................... 55
Mailbox System .............................................. 59
Contacts (Phone Book) .................................. 69
System Phonebook ........................................ 76
Group Features .............................................. 78
Other Useful Features ..................................... 83
Write Text ....................................................... 90
Settings .......................................................... 92
Accessories ................................................. 106
Add Microsoft Outlook Contacts .................. 110
Web Server .................................................. 112
Corporate Directory ...................................... 122
Web ............................................................. 124
WAP Services .............................................. 126
Useful Hints .................................................. 131
Installation .................................................... 132
Troubleshooting ............................................ 144
Glossary ....................................................... 145
Index ............................................................ 147
BusinessPhone – Ericsson Dialog 4425 IP Vision
3
Welcome
Welcome
Welcome to the User Guide for the Dialog 4425 IP Vision in the
BusinessPhone Communication Platform from Ericsson. The
BusinessPhone Communication Platform consists of
BusinessPhone Compact, BusinessPhone 50,
BusinessPhone 128i and BusinessPhone 250.
The features described in this User Guide are related to version 8.0
or higher of the BusinessPhone Communication Platform. Some
might not work in earlier versions of the system and/or might be
protected by a hardware dongle that has to be bought separately.
The User Guide describes the facilities of the BusinessPhone
Communication Platform and the Ericsson Dialog 4425 IP Vision
with a default programming. There may be some differences in the
way your phone is programmed. Please consult your system
administrator if you need further information.
Note: The Ericsson Dialog 4425 phone exists in two
versions, i.e. version 1 and version 2. Underneath the
telephone, version 1 is marked DBC 425 01 and version 2
is marked DBC 425 02. Check to see which version you are
using.
The latest version of this User Guide can also be downloaded from:
http://www.ericsson.com/enterprise/
Note: Dialog 4425 IP Vision is an IP telephone conforming
to the H.323 standard, i.e. it can only be used with a local
area network (LAN) that supports this type of telephone.
The Dialog 4425 IP Vision supports the Dynamic Host
Configuration Protocol (DHCP) for determination of IP
addresses. If DHCP is not supported by the LAN, please
contact your system administrator.
4
BusinessPhone – Ericsson Dialog 4425 IP Vision
Welcome
Copyright
All rights reserved. No parts of this publication may be reproduced,
stored in retrieval systems, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or
otherwise, without prior written permission of the publisher except
in accordance with the following terms.
If this publication is made available on Ericsson media, Ericsson
gives its consent to downloading and printing copies of the content
provided in this file only for private use and not for redistribution. No
parts of this publication may be subject to alteration, modification
or commercial use. Ericsson will not be liable for any damages
arising from use of an illegal modified or altered publication.
Microsoft and Microsoft Outlook are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or
other countries/regions.
Warranty
ERICSSON MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Ericsson shall not be
liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance or use of
this material.
Declaration of Conformity
Hereby, Ericsson Enterprise AB, declares that this telephone is in
conformity with the essential requirements and other relevant
provisions of the R&TTE directive 1999/5/EC.
Details to be found at: http://www.ericsson.com/sdoc
BusinessPhone – Ericsson Dialog 4425 IP Vision
5
Welcome
Important User Information
Safety instructions
Read these safety instructions before use!
Note: When using your telephone or connected
equipment, the following basic safety precautions should
always be followed to reduce risk of fire, electrical shock
and other personal injury.
6
•
Follow instructions in the equipment's user guide or other
documentation.
•
Always install equipment in a location and environment for
which it is designed.
•
For mains powered telephones: Only operate with the mains
power voltage indicated. If you are uncertain of the type of
power supplied to the building, consult property management
or your local power company.
•
For mains powered telephones: Avoid placing the telephone's
power cable where it can be exposed to mechanical pressure
as this may damage the cable. If the power supply cord or plug
is damaged, disconnect the product and contact qualified
service personnel.
•
Headsets used with this equipment must comply with EN/IEC
60950-1 and for Australia AS/NZS 60950: 2000.
•
Do not make any changes or modifications to equipment
without seeking approval from the party responsible for
compliance. Unauthorized
•
changes or modifications could void the user's authority to
operate the equipment.
•
Do not use the telephone to report a gas leak in the vicinity of
the leak.
•
Do not spill liquid of any kind on the product or use the
equipment near water, for example, near a bathtub, washbowl,
and kitchen sink, in a wet basement or near a swimming pool.
•
Do not insert any object into equipment slots that is not part of
the product or auxiliary product.
•
Do not disassemble the product. Contact a qualified service
agency when service or repair work is required.
•
Do not use a telephone (other than cordless type) during an
electrical storm.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Welcome
•
The handset may attract and retain small metal objects in the
earcap region.
The phone can be powered either from the LAN or from a 24 V AC/
AC plug-in power adapter.
•
Only use applicable 24 V AC/AC plug-in adapters (power
supplies) listed below or an adapter approved by your
local reseller.
Ericsson product
number
Power rating
Supplier
RES 141 312/1
20VA 230V/24V
Toroid, Sweden
HBP 90120
RES 141 314/1
20VA 230V/24V
Toroid, Sweden
HBP 90220 (for Great Britain,
Hong Kong, Singapore)
RES 141 315/1
20VA 120V/24V
Jameco, USA
AC2410F1
(model number ADU240100)
Supplier product number
Disposal of the product
•
Your product should not be placed in municipal waste. Please
check local regulations for disposal of electronic products.
BusinessPhone – Ericsson Dialog 4425 IP Vision
7
Description
Description
19
7
1
15
A
B
C
3
4
2
5
D
E
F
G
H
14
I
7
J
7
K
L
16
M
N
7
O
11
8
9
P
Q
12
10
6
18
13
20
17
8
BusinessPhone – Ericsson Dialog 4425 IP Vision
Description
1
Graphical display
320x80 pixels. Tilt able. See section “Display information” on
page 12.
2
Display menu keys
The functions depend on the traffic state. When you are requested
to (see display), press the required key to access the function.
3
Left Navigation key
To navigate one position to the left.
a. To navigate one step to the left in the top menu. See section
“Display information” on page 12.
b. On WAP pages; if you press this key for a short while, you will
return to the WAP home page. See section “Corporate
Directory” on page 122, “Web” on page 124 and “WAP
Services” on page 126.
4
Home
a. To return to home position (idle mode). When this key is
pressed, you always go to the home position, independent of
which menu you are in.
b. On WAP pages; if you press this key for a short while, you will
return to the WAP home page. See section “Corporate
Directory” on page 122, “Web” on page 124 and “WAP
Services” on page 126.
5
Right Navigation key
To navigate one position to the right.
6
Line
To initiate or receive calls.
7
Programmable keys
Storing numbers, program functions. Can be programmed as dial
by name keys, function keys, etc. See section “Programmable
Keys” on page 94.
8
Mute
• To switch the microphone on or off during a call. See section
“Mute” on page 43.
•
9
10
To switch off the ring signal in idle mode or when ringing. See
section “Silent ringing” on page 103.
Loudspeaker on/off
To switch the loudspeaker on or off to enable handsfree
connections. See section “During Calls” on page 42.
Headset key
See section “Headset (optional)” on page 107.
BusinessPhone – Ericsson Dialog 4425 IP Vision
9
Description
11
Volume control
a. To adjust the ringing volume and the incoming speech volume
for the handset and loudspeaker.
b. Space/backspace in writing mode.
12
Clear
To disconnect calls or to clear the display in programming.
13
Microphone
14
Loudspeaker
15
Handset with hearing aid function
Please note: The handset may attract and retain small
metal objects in the earcap region.
10
16
Message
Message indication key. Press the key to retrieve the message. See
section “Access the Mailbox” on page 61.
17
Pull-out leaf for quick access (optional)
See section “Pull-out Leaf (optional)” on page 109.
18
Designation card
Use the Designation Card Manager to make and print your own
designation cards. The Designation Card Manager is included on
the Telephone Toolbox CD for BusinessPhone Communication
system which is part of the Quick Reference Guide.
19
Power adapter connection
See section “Install cables” on page 135.
20
Key Panel
The extra key panel has 17 programmable keys. Up to four panels
can be connected. See section “Key panel” on page 106.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Description
Lamp indications
The key lamps on your telephone indicate with different signals the
traffic state of the ongoing call or function.
Ô
ÕÔ
ÖÔ
ÕÔ
Extinguished lamp
The function is not active.
Steady light
The function is active, supervised
extension or trunk is busy, heard
message
Rapidly flashing lamp
An incoming call to a supervised
extension, to a supervised trunk or to
own extension, new message.
Light with short breaks
Ongoing call.
BusinessPhone – Ericsson Dialog 4425 IP Vision
11
Description
Display information
The graphical display assists your actions on the phone with stepby-step instructions.
The fields in the display consists of the following information:
•
The top area is the tab field, which is used to indicate the tab
the user has selected by using the navigation keys.
•
The middle area is divided into several fields, showing:
•
–
the time and date
–
the user name and the extension number,
–
icons and a volume level bar
–
the traffic state or the temperature (if a temperature sensor
is connected to the system)
–
Called number and name for internal calls
–
Called number for external calls
–
Calling number and name for internal and external calls *)
–
Instead of the Calling/Called name & number additional
information such as absence reason, diversion state etc.
can be shown.
If the SOS call function is enabled, the text:
’For SOS calls, dial xxx’ is shown.
The lower line presents lead texts for the menu keys.
Settings CallList
<Traffic state>
Contacts
<Calling/Called name & number>
CorpDirectory
Web
<Time>
<Date>
<User name &
Extension number>
For SOS calls, dial xxx
<Icons
<Menu key 1> <Menu key 2> <Menu key 3> <Menu key 4>
When an information ends with three dots (...), this means that the
system is working or waiting for your action. When an information
ends with an exclamation mark (!), this means that no further action
is possible.
*) The provisioning of external calling numbers is network
dependent. Even when it is provided it might happen that callers
are suppressing their numbers, in this case the display only shows
’Incoming...’. If a name is available to the external caller‘s number
in your system, it is also shown on the display. (Please contact your
system administrator whether the feature ’Name presentation for
external calls’ is available in your system).
12
BusinessPhone – Ericsson Dialog 4425 IP Vision
Description
Two display versions
The display examples in this guide are valid for both the Dialog
4425 v. 2 phone and the Dialog 4425 v. 1 phone, however the
displayed text simulates the Dialog 4425 v. 2 phone. If there is any
information for the other version than the one described, this is
presented in a “Telephone version note”.
Top menu
The top menu is in the black frame below. The appearance of the top
menu depends on which telephone version you are using (Dialog
4425 v. 1 phone or Dialog 4425 v. 2 phone), see examples below.
Dialog 4425 v. 1 phone:
Settings CallList
<Traffic state>
PhoneBook
<Calling/Called name & number>
WAP Services
<Time>
<Date>
<User name &
Extension number>
For SOS calls, dial xxx
<Icons
<Menu key 1> <Menu key 2> <Menu key 3> <Menu key 4>
Dialog 4425 v. 2 phone:
Settings CallList
<Traffic state>
Contacts
<Calling/Called name & number>
CorpDirectory
Web
<Time>
<Date>
<User name &
Extension number>
For SOS calls, dial xxx
<Icons
<Menu key 1> <Menu key 2> <Menu key 3> <Menu key 4>
BusinessPhone – Ericsson Dialog 4425 IP Vision
13
Description
n
or
H
v
Display symbols
Home
Home position (idle mode).
Silent Ringing (a) or Level bar (b)
Appear on the same position
a) Silent Ringing has been activated. The ring signal is switched off.
Y Z
or
y z
or
i
o
e
s
r
V
W
P
14
b) Indicates the ringing volume.
New missed call
Indicates new missed and not checked incoming call(s). The
number beside the symbol indicates how many times this caller has
tried to call you.
Missed call
Indicates missed but checked incoming call(s). The number beside
the symbol indicates how many times this caller has tried to call
you.
Incoming call
Indicates an answered incoming call in the call list.
Outgoing call
Indicates an outgoing call in the call list.
Scroll bar
If a list, for example your telephone directory or a list with several
menu options, is too long to be shown in the display, a scroll bar
appears as an indicator.
Checked radio button
If a radio button is checked, the respective option has been
selected.
Unchecked radio button
This means that the respective option is not selected.
Message.
Indicates that there is a message waiting.
Access warning.
Flashes when the access to system services is reduced (network
dependent).
Headset Preset
Indicates that the phone is set for incoming and outgoing calls to
be connected to the headset when you answer or make calls
without lifting the handset.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Description
F
E
Up
Scroll up or to the left in the menu.
Down
Scroll down or to the right in the menu.
Menu Structure
The available IP specific telephone and network functions can be
accessed via the menus. This section shows the structure for each
of the menus that can be selected from the Home menu.
ÅÆÇ
Dialog 4425 v. 1 phone:
ÅÆÇ
Dialog 4425 v. 2 phone:
î
Use the navigation keys to go to the Settings, Call List,
PhoneBook or WAP Services menu.
Use the navigation keys to go to the Settings, Call List,
Contacts, CorpDirectoryor Web menu.
When you have selected a menu with the navigation keys:
Press a menu function key to select an option (see display).
Note: Since the Dialog 4425 IP Vision can be used in
different networks, some functions might not be supported
by your system.
BusinessPhone – Ericsson Dialog 4425 IP Vision
15
Description
Menu structure Dialog 4425 v. 1 phone
Menu structure for each of the menus that can be selected from
the idle menu. When you are navigating the menus, a selected
menu is marked with a black frame. Use the navigation keys and
the display menu keys to navigate in the menus.
Top menu
Settings
CallList
PhoneBook
WAP Services
Dial Name
Edit
Delete
Add
Central Directory
Other WAP address
Home 4
Display menu keys
Call
AddPhoneBook
Delete
Idle display menu keys
Log off
Programmable Keys
Ring Character
Time & date
Time Format
Date Format
Time 2
Date 2
n Missed 1
Select Profile
Follow-me
External Follow-me
Absence Reason
Language
Display Contrast
Log Off Restriction 5
Option Unit 3
Hearing Level
Display menus
Keypad characters
Network
LAN access control 5
DHCP 5
Web address
IP Address 5
Subnet Mask 5
Default Gateway 5
SW server from DHCP 5
SW Server 5
Proxy Server 5
Proxy Address 5
Proxy Port 5
Gatekeeper Discovery 5
Gatekeeper 5
Password
VLAN for LAN Port 5
VLAN for PC Port 5
16
Absence
Standard
Increased
Explanations
1) Only shown when there are missed calls.
A shortcut to “CallList” is established
n = Number of missed calls.
2) Not used.
3) Only used when option unit is connected.
4) Only shown when pre-defined WAP portal is
available.
5) Only available to your system administrator.
Home. Return to home position (idle mode).
BusinessPhone – Ericsson Dialog 4425 IP Vision
Description
Menu structure Dialog 4425 v. 2 phone
Menu structure for each of the menus that can be selected from
the idle menu. When you are navigating the menus, a selected
menu is marked with a black frame. Use the navigation keys and
the display menu keys to navigate in the menus.
Top menu
Settings
CallList
Contacts CorpDirectory Web
Display menu keys
Call
AddContact
Delete
Dial Name
Edit
Delete
Add
Other WAP address
Home 4
Idle display menu keys
Programmable Keys
Ring Character
Time & date
Log off
Time Format
Date Format
Time 2
Date 2
Language
Display Contrast
Backlight
Log Off Restriction 5
Option Unit 3
Hearing Level
Display menus
Keypad characters
Network
LAN access control 5
DHCP 5
Web address
IP Address 5
Subnet Mask 5
Default Gateway 5
SW server from DHCP 5
SW Server 5
Proxy Server 5
Proxy Address 5
Proxy Port 5
Gatekeeper Discovery 5
Gatekeeper 5
Password
VLAN for LAN Port 5
VLAN for PC Port 5
Absence
n Missed 1
Select Profile
Follow-me
External Follow-me
Absence Reason
Standard
Increased
BusinessPhone – Ericsson Dialog 4425 IP Vision
Explanations
1) Only shown when there are missed calls.
A shortcut to “CallList” is established
n = Number of missed calls.
2) Not used.
3) Only used when option unit is connected.
4) Only shown when pre-defined WAP portal is
available.
5) Only available to your system administrator.
Home. Return to home position (idle mode).
17
Description
Tones & Signals
Tones are audible in the handset.
Dial tone
(System ready to accept digits)
Special dial tone
(System ready to accept digits,
active diversion on telephone)
Ringing tone
- repeated after 4 s
(Ringing signal to called party)
Busy tone
(Called party is busy)
Number unobtainable tone
(Called number not accessible or vacant)
Call Waiting tone
Congestion tone
(Call cannot be executed due to
congestion or called party blocked)
Verification tone
(Verification that ordered function is
accessed)
Intrusion tone
(Sent to all parties during Intrusion)
Ringing signals are emitted from the phone.
Internal ringing signal
- repeated after 4 s
External ringing signal
- repeated after 4 s
Automatic Callback signal
Note: The tones and ringing signals in this guide refer to the
standard system but may vary between countries.
18
BusinessPhone – Ericsson Dialog 4425 IP Vision
Start the Phone – Log On/Off
Start the Phone – Log On/Off
All system settings for your IP phone must be set by the system
administrator before you can use the phone.
Connect the required cables.
See section “Installation” on page 132.
Note: Depending on the settings in your network and
telephone system, the start up procedure may be different
from phone to phone. Check the display on your phone and
read the required sections in this chapter to continue with
the start up procedure.
When this is done, and the phone is connected to the local network
(LAN), your phone starts the start-up procedure automatically
when connected to the mains.
Notes:
The phone does not work during a power failure. After a
power failure the phone will restart automatically. However,
when a password is requested, you must log on before the
phone can be used again.
Reset the phone
íÉ#
If your phone does not work properly, you can use the following
procedure to reset the phone. This procedure will also clear the
Call list. After the procedure you must log on again to use the
phone.
Press simultaneously for at least one second to reset the
phone.
BusinessPhone – Ericsson Dialog 4425 IP Vision
19
Start the Phone – Log On/Off
Start the Phone
Connect the phone to the local network.
See the Installation section, “Install cables” on page 135.
If an external power adapter is used:
Connect the adapter to the mains and connect the plug from
the adapter to “POWER” on the underside of your phone.
See the Installation section, “Install cables” on page 135.
After a few seconds the Headset key lamp will light for about five
seconds, then the displays shows:
Settings
CallList
Contacts
?
User administrator mode to change IP settings
(x)
(No change)
The x indicates a timer counting down seconds. If no key is
pressed during this time, “no change” is selected automatically.
Notes: The administrator mode is used to change the IP
settings of the phone. All administrator mode changes
should be done by your system administrator.
If you want to use the previously stored settings, you can
speed up the procedure by pressing the Loudspeaker key.
Now the display informs you that the phone is connecting to the
server and that the software is loading. This takes about
15 seconds. After a self-test, the phone is ready for log on.
20
BusinessPhone – Ericsson Dialog 4425 IP Vision
Start the Phone – Log On/Off
LAN access control (network authentication)
(Dialog 4425 v. 2 phone only).
Your telephone might require a network authentication to gain
access to the network. In this case you must enter a valid user
identity and password.
Note: The user identity and password used for the network
authentication is not the same user identity and password
you use to log on. The password is obtained from, and can
only be changed by the system administrator.
Settings
CallList
Contacts
?
User administrator mode to change IP settings
(x)
z
Log on
z
(No change)
Enter your user identity.
(The display menu key Erase, is used to remove a wrong entry.)
Press (see display).
Enter your password.
(The display menu key Erase, is used to remove a wrong entry.)
Note: The password can be entered with letters or
numbers, see section “Write Text” on page 90.
Log on
Press (see display).
If your user identity and password are accepted, the phone
continues with the startup procedure.
Note: If your user identity and password are not accepted,
contact your system administrator.
BusinessPhone – Ericsson Dialog 4425 IP Vision
21
Start the Phone – Log On/Off
Continued startup procedure
The display shows:
Settings
CallList
Contacts
?
User administrator mode to change IP settings
(x)
(No change)
A timer counts down from 5 seconds. If no key is pressed during
this time, (No change) is selected automatically.
Notes:
You can speed up the procedure by pressing
(No change).
The administrator mode is used to change the IP settings in
your phone. This mode is reserved for your system
administrator.
The display now indicates that the phone is connecting to the
server and the software is loading. This takes about 1 minute. After
a self test, the phone is ready for use or ready for log on. To log on,
see section “Log On” on page 24.
22
BusinessPhone – Ericsson Dialog 4425 IP Vision
Start the Phone – Log On/Off
Update software
If new software has to be loaded into your phone, the display is
showing this. When new application software is available, the
following display is shown:
Settings
CallList
Contacts
A new version of the bootrom software
?
is vailable on the server, update?
(Yes)
Settings
CallList
Contacts
A new version of the application software
xx
No
?
is available on the server, update?
(Yes)
xx
No
The xx indicates a timer counting down seconds. If no key is
pressed during this time (approximately. 60 seconds), “Yes” is
selected automatically. You can speed up the procedure by
pressing the Loudspeaker key
(Yes)
Press to update the software (=Yes).
The software download takes about 30 seconds, then the startup
procedure continues automatically.
Note: It is important that you do not disconnect the power
from the phone while the new software is being
downloaded and saved. If a power failure occurs, the
software must be downloaded again.
If you want to continue to use the previously stored settings:
No
Press to use the current version of the software (=No).
BusinessPhone – Ericsson Dialog 4425 IP Vision
23
Start the Phone – Log On/Off
Log On
The following options exist:
1
2
3
You are allowed to log on and log off the phone. This is the most
common option.
The telephone is always logged on with a default number. You
cannot log on or off. This option can be used for phones in
conference rooms, receptions etc.
The telephone is always logged on, with a default number, as in
option 2, but you can log on with your own extension number
and get your personal categories.
Option 1
The Log on menu is displayed:
Settings CallList
User not logged on!
Contacts
CorpDirectory
Web
12:46 12 May 2003
Log on with: 9318
For SOS calls, dial 112
Erase
Log on
Note: The Dialog 4425 IP Vision is powered by the LAN
connection or optionally via an external 24 volt AC/AC
adapter. If the telephone is powered by the LAN, no
additional power adapter is needed.
The LAN (or the external power adapter) must be
connected to the telephone before use. If the power
connection fails, your IP phone will not work.
z
If the SOS call function is disabled, the text For SOS calls, dial
112 is not shown. The number for SOS calls might vary between
countries.
Log on
Enter your extension number and press (see display).
If you have logged on using this telephone before, the extension
number used at the previous log on is displayed. In this case, you
do not have to enter your extension number; just press Log on to
go ahead.
If a password is not required, the display shows your extension
number, and the phone is ready for use:
24
BusinessPhone – Ericsson Dialog 4425 IP Vision
Start the Phone – Log On/Off
Settings
+ 5O
CallList
Contacts
CorpDirectory
Web
12:46 12 May 2003
SMITH CHRISTOPH
9318
v
Log off
Absence
The user name and the extension number can consist of one or
two rows. The name can have max. 20 characters; if the name is
too long (more than 20 characters) and a space exists (e.g. family
name - space - first name), just 1 character after the space is
displayed
The temperature is shown only, if a temperature sensor is
connected to the system.
If a password is requested, the display shows:
Settings CallList
User not logged on!
Contacts
CorpDirectory
Web
12:46 12 May 2003
Enter password: ***
z
Erase
Log on
Log on
Enter your Password and press (see display).
If you do not know your Password or extension number or a screen
other than the log on screen is displayed, contact your system
administrator.
Telephone version note: For Dialog 4425 v. 2 phone the
password can be entered with letters or numbers, see
section “Write Text” on page 90.
When log on is complete, this screen will be displayed:
Settings
CallList
Contacts
CorpDirectory
Web
12:46 12 May 2003
EXTENSION 9318
v
Log off
Absence
Note: This screen represents the display when the phone
is ready to place, receive calls, etc. (normal state).
Sometimes a new application software may be available.
For more information, see section “Software updates” on
page 133.
BusinessPhone – Ericsson Dialog 4425 IP Vision
25
Start the Phone – Log On/Off
To log on with a different extension number
If you have already logged on using this telephone before, the
extension number used at the previous log on is displayed.
z
z
To delete the displayed number:
Log on
Enter your extension number and press (see display).
Log on
Enter your Password and press (see display).
To correct a wrong entry:
Erase
Press (see display).
Option 2
The following idle mode menu is displayed, and the phone is ready
for use.
Settings
+ 5O
CallList
Contacts
CorpDirectory
Web
12:46 12 May 2004
CONF ROOM
9318
v
Absence
Note: It is not possible to log off, when a phone has been
programmed according to this option.
26
BusinessPhone – Ericsson Dialog 4425 IP Vision
Start the Phone – Log On/Off
Option 3
The following idle mode menu is displayed. You can log on with
your own extension number and get your personal categories.
Settings
+ 5O
CallList
Contacts
CorpDirectory
Web
12:46 12 May 2004
CONF ROOM
9318
v
Absence
z
Press (see display).
z
If a password is requested:
ChangeUser
Log on
Log on
ChangeUser
Dial your extension number.
Press to log on (see display).
If a password is not required, the display shows your name and
extension number, and the phone is ready for use.
Enter your password.
Telephone version note: For Dialog 4425 v. 2 phone the
password can be entered with letters or numbers, see
section “Write Text” on page 90.
Press to log on (see display).
The display shows your name and extension number, and the
phone is ready for use.
Note: During the night, the phone is automatically logged
off, and then logged on again with the default number.
Log off
Log off
Yes
Press to log off (see display).
You are asked to confirm the process.
Press to confirm.
The log on screen is displayed.
BusinessPhone – Ericsson Dialog 4425 IP Vision
27
Incoming Calls
Incoming Calls
A ringing signal, a flashing Line key lamp and the display indicate
an incoming call.
Answer calls
When you receive an incoming call, the display shows:
Settings CallList
Incoming...
Contacts
BROWN JANE 4736
CorpDirectory
Web
12:46 12 May 2003
EXTENSION 9318
v
u
Reject
Reject
Lift the handset to accept the call.
Or:
Press to dismiss the call (see display).
Note: The rejected call is added to the Call List, see section
“Call List” on page 37.
Line
28
ÖÔ
Â
Handsfree
Press without lifting the handset.
Or:
Press without lifting the handset.
You are connected via the loudspeaker and microphone.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Incoming Calls
í
Press to terminate a handsfree call.
To another extension (Call pick-up)
z
6
You can answer a call to another extension from any phone in your
office.
Enter the ringing extension.
You receive busy tone.
Press.
Note: The number for answering calls to another extension
may differ from country to country, see table “Alternative
programming for Automatic Callback, Camp-on, Intrusion”
on page 105.
Deflect the call
If you do not want to take the call, when the phone rings:
Reject
Press (see display) to deflect the call.
The call is diverted to a pre-programmed diversion address (same
as used for the Fixed Diversion)
Note: If the phone is logged on as secondary phone in a
Tandem configuration an initiated call deflection will release
the call from the secondary phone however not from the
primary phone.
Answer a second call
See “Call Waiting” on page 45
BusinessPhone – Ericsson Dialog 4425 IP Vision
29
Outgoing Calls
Outgoing Calls
Make calls
z
0z
How to make internal and external calls.
Enter a either a directory number to make an internal call.
Or:
Enter the digit(s) for external line access and the desired
public number.
Note: Which digit to press for external call access,
depends on the configuration of the system.
The display shows the entered number, for example:
Settings
CallList
Contacts
Enter number: 4736
CorpDirectory
Web
12:46 12 May 2003
EXTENSION 9318
v
After entering the number, the number is dialled immediately.
When the dialled number is free and ringing, the display shows:
Settings
Calling ...
CallList
Contacts
BROWN JANE 4736
CorpDirectory
Web
12:46 12 May 2003
EXTENSION 9318
v
30
BusinessPhone – Ericsson Dialog 4425 IP Vision
Outgoing Calls
u
d í
or
Line
ÖÔ Â
z
í
or
When the connection has been established, the display shows the
other party’s name and number (if supported by the network).
Lift the handset
Note: You can make your calls faster, using Common
Abbreviated Numbers and by programming your own
Abbreviated Numbers.
Press to end the call.
Handsfree
Press without lifting the handset.
Enter the internal or external number.
When the call is established, you will be connected to the other
party via the loudspeaker and microphone.
Press to terminate a handsfree call.
Note: To learn more about other ways to make a call, see
sections “Abbreviated Numbers” on page 34, “Dial-byName” on page 34, “Contacts (Phone Book)” on page 69,
and “Call List” on page 37.
Last External Number Redial
***
When you initiate an external call the system automatically stores all
the dialled digits, irrespective of whether the call was successful or
not. Stored numbers can consist of maximum 32 digits.
Press to redial the last dialled external number.
Note: You can also redial a number with the Call List, see
section “Call List” on page 37.
BusinessPhone – Ericsson Dialog 4425 IP Vision
31
Outgoing Calls
Automatic Callback
5
d í
or
u
You call an extension and receive busy tone or get no answer.
This can also be used if no external line is free:
Press.
Verification tone.
Note: The number for Automatic Callback may differ from
country to country, see table “Alternative programming for
Automatic Callback, Camp-on, Intrusion” on page 105.
Replace the handset or press to finish the procedure.
You are called back if the extension finishes the ongoing call or the
next time the extension finishes a new call. You have to answer
within eight seconds otherwise the Callback service is cancelled.
Lift the handset when you are called back.
The requested extension is called automatically.
Busy extension
You call an extension and receive busy tone. The display shows:
Settings
Calling...
4736
CallList
Contacts
CorpDirectory
Web
12:46 12 May 2003
EXTENSION 9318
v
Camp-on
4
32
You can notify a busy extension of your call by a muted ringing call
(if this function is allowed).
Press to camp-on.
Keep handset off hook. When the called extension replaces the
handset it will be called automatically.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Outgoing Calls
Notes:
If you receive the busy tone again, the desired extension
does not allow Camp-on.
The number for Camp-on may differ from country to
country, see table “Alternative programming for Automatic
Callback, Camp-on, Intrusion” on page 105.
Intrusion
8
You can intrude on an ongoing call on a busy extension (if this
function is allowed).
Press to intrude.
Intrusion tone is heard and a three-party call is established. When
the called extension replaces the handset and you keep off hook,
the called extension will be recalled automatically.
Notes:
If you still hear the busy tone, your extension does not have
the authority to intrude or the desired extension is protected
against Intrusion.
The number for Intrusion may differ from country to country,
see table “Alternative programming for Automatic Callback,
Camp-on, Intrusion” on page 105.
Diverted Extension
See “Bypass Call Forwarding” on page 54
BusinessPhone – Ericsson Dialog 4425 IP Vision
33
Outgoing Calls
Abbreviated Numbers
By using Abbreviated Numbers, you can make calls simply by
pressing a few keys. Frequently used external numbers are stored
as Common Abbreviated Numbers in the exchange.
Your personal most frequently used external numbers can be
stored and used on the programmable keys on the telephone or on
the keys 0 to 9.
Common Abbreviated Numbers
z
External numbers are stored centrally in your BusinessPhone
Communication Platform. Common Abbreviated Numbers can be
dialled from every extension that has the authority to do so.
Enter the Common Abbreviated Number.
Please refer to your telephone directory.
Dial-by-Name
If you frequently use certain functions or call certain numbers, you
may program them on the programmable keys of your telephone.
Stored numbers can consist of a maximum of 24 digits. For
programming them, see chapter “Programmable Keys” on
page 94.
Head Office
34
Ô
To use the function or call the number, just press the key.
Press to make a call (pre-programmed).
BusinessPhone – Ericsson Dialog 4425 IP Vision
Outgoing Calls
Individual Abbreviated Numbers
0 9
You can program and activate your most frequently used external
numbers on the digit keys to .
u **
z
Note: To program individual abbreviated numbers, your
extension has to be authorized by the system administrator.
Lift the handset and press.
Enter the Abbreviated Number.
A number between 0 and 9.
Program Individual Abbreviated Numbers
u
*51*
z*
0z
#
To program external numbers on the digit keys
0 to 9:
Lift the handset.
Enter programming mode.
Select an Abbreviated Number between 0 and 9 and press.
Enter the digit(s) for external line access and the public
number.
The number can consist of up to 24 digits.
Note: Which digit to press for external line access depends
on the configuration of the system.
If your public network requires waiting for a second dial
tone, press *.
Press.
BusinessPhone – Ericsson Dialog 4425 IP Vision
35
Outgoing Calls
36
u
#51*
z#
Cancel one specific Individual Abbreviated Number
u
#51#
Cancel all Individual Abbreviated Numbers
Lift the handset.
Press.
Enter an Abbreviated Number between 0 and 9 and press.
Lift the handset.
Press.
Verification tone.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Call List
Call List
Your incoming calls (answered, missed and rejected) and outgoing
calls are stored in the Call List. The calls in the Call List can also be
added to the Phone Book, see section “Contacts (Phone Book)” on
page 69. Up to 50 calls can be stored in the Call List.
Note: If a power failure occurs or another user logs on, the
Call List will be cleared.
Redial from the Call List
CallList
Select with the navigation keys (see display).
The display shows the Call List entries sorted by date and the call
duration (hours, minutes, seconds). For example:
Settings
CallList
i PLATTNER MICHAEL
o BECKER SANDRA
o BROWN BOBBY
o SANDMAN MARIA
o HASLINGER WOLFGANG
more...
F
Contacts
4736
8336
9702
1335
6068
CorpDirectory
12:33 12 May
12:33 12 May
12:33 12 May
12:33 12 May
17:07 11 May
E
Web
0:00:07
0:00:07
0:00:07
0:00:50
Call
If the list is too long and cannot be displayed at a time, a scroll bar
appears on the right side of the display.
F E
or
Call
The call duration is shown only, if the call was answered.
Press to browse the CallList (see display).
The digit in brackets shows the entry position in the list.
Press to call (see display).
Or:
more...
Press to get more options (see display).
The edit menu is displayed.
BusinessPhone – Ericsson Dialog 4425 IP Vision
37
Call List
Edit menu options:
Exit
Press to return the normal display (see display).
Or:
Back
Press to return to the previous menu (see display).
Or:
Delete
Press to delete the call from the Call List (see display).
Or:
38
AddContact
Press to add the number to the Contacts (see display),
(Dialog 4425 v. 2 only).
See section “Add missed, rejected, answered or dialled calls to the
Contacts (Phone Book)” on page 40.
AddPhoneBook
Press to add the number to the Phone Book (see display),
(Dialog 4425 v. 1 only).
See section “Add missed, rejected, answered or dialled calls to the
Contacts (Phone Book)” on page 40.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Call List
Missed/Rejected calls
The number of missed calls is shown in the bottom line of the
Home menu in idle mode:
Settings
CallList
Contacts
CorpDirectory
Web
12:46 12 May 2003
9318
v
Log off
1 Missed
Absence
1 Missed
Press (see display).
The digit indicates the number of missed calls, in this example one.
Now the Call List menu is displayed.
CorpDirectory
Web
Contacts
2156 10:33 12 May 0:00:07
Settings CallList
COOPER CAROL
Y
more...
F
E
Call
Note: You can also enter the Call List by selecting the Call
List menu with the navigation keys.
Call
Press to call (see display).
Or:
more...
Press (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
39
Call List
Add missed, rejected, answered or dialled calls to the
Contacts (Phone Book)
CallList
E F
or
more...
AddContact
Select with the navigation keys (see display).
Press to browse the CallList (see display).
Press (see display).
Press to add the number to the Contacts (see display),
(Dialog 4425 v. 2 only).
Settings
Add
CallList
Contacts
CorpDirectory
Web
BROWN JANE
4736
Edit
AddPhoneBook
OK
OK
Press to add the number to the Phone Book (see display),
(Dialog 4425 v. 1 only).
Press to add the call to the Phone Book (see display).
Or:
Edit
Press to edit the number before you add it to Contacts
(Phone Book) (see display).
Via the display options you can change or erase the name and
number before you add it to the Phone Book.
Settings
Add
CallList
Contacts
CorpDirectory
Web
BROWN JANE
4736
-?!,.:;"'()1
Exit
Number
Erase
Save
How to edit an entry and for further information, see sections
“Contacts (Phone Book)” on page 69 and “Write Text” on page 90.
40
BusinessPhone – Ericsson Dialog 4425 IP Vision
Call List
Delete an entry from the Call List
CallList
E F
or
Select with the navigation keys (see display).
Press to browse the CallList (see display).
more...
Press (see display).
Delete
Press (see display).
The selected entry will be deleted.
BusinessPhone – Ericsson Dialog 4425 IP Vision
41
During Calls
During Calls
The BusinessPhone Communication Platform allows you to handle
calls in many different ways. You can switch between handset and
handsfree/group conversation, mute the microphones, make an
inquiry, transfer the call, create a Conference or put the call on hold
to perform other tasks.
From handset to handsfree
Â
d
í
You have an ongoing conversation via the handset.
Press to switch the loudspeaker on.
You are now in the handsfree mode.
Replace the handset.
Handsfree conversation.
Note: You can adjust the volume, see section “Handset
and loudspeaker volume” on page 102.
Press to end the call.
From handsfree to handset
u
42
You have an ongoing handsfree conversation.
Lift the handset.
Conversation via the handset.
BusinessPhone – Ericsson Dialog 4425 IP Vision
During Calls
Mute
É
You have an ongoing conversation.
Press to switch the microphone on or off.
When the lamp lights, the caller will not be able to hear the
conversation in your room.
Inquiry
Line
ÕÔ
z
During an ongoing conversation you would like to make an inquiry
to an internal or external party.
Press
The first call is put on hold. Enter the number of the person you
would like to ask.
Enter the number of the third party.
When the third party answers, you can switch between the calls,
create a conference or end one of the calls.
Refer back
Line
Line
Õ
Ô
2
ÕÔ 1
You can switch between the connected parties:
Switch between calls.
Press to terminate.
BusinessPhone – Ericsson Dialog 4425 IP Vision
43
During Calls
Transfer
Line
ÖÔ
z
d
You have an ongoing internal or external conversation and you
want to transfer the ongoing call.
Press.
Enter the number of the third party.
You can transfer the call before answer or wait for answer
Note: Make sure, that you are connected to the desired
party. Please read the notes and warnings in section “Useful
Hints” on page 131.
Replace the handset.
The call is transferred.
Transfer to a busy extension
You can even transfer calls to busy extensions. The other party will
hear a muted signal (camp-on), and the call will be extended, as
soon as the ongoing call is terminated (if Camp-on is allowed).
Callback
You are called back, if you have transferred an external call and the
other extension has not answered the call within a certain time.
Your telephone will ring again.
44
BusinessPhone – Ericsson Dialog 4425 IP Vision
During Calls
Call Waiting
If you hear the Call Waiting tone during an ongoing conversation,
another person is trying to contact you.
d
u
Âd
To terminate the ongoing call and answer the waiting
call
Replace the handset to finish the ongoing call.
The waiting call is signalled on your phone.
Lift the handset to answer the new call.
Or:
Press and replace the handset to answer in handsfree mode.
Conference
ÖÔ
z
ÖÔ 3
Line
Line
d
You have an ongoing conversation and you want to establish a
telephone conference.
Press.
Enter the number of the third party.
Press to establish a three party conference.
Now you have established a three party conference. To mark the
conference, all conference members will hear a periodical
conference tone.
Repeat the procedure to include other persons to the
conference.
In this way, you can include up to six parties in a conversation. How
many of them can be external callers depends on the programming
of the system.
Replace the handset to leave the conference.
BusinessPhone – Ericsson Dialog 4425 IP Vision
45
During Calls
Individual Hold
Line
Line
ÕÔ
ÖÔ
ÕÔ
d
ÖÔ
Line
Line
z
6
46
You have an ongoing conversation. Now you want to put the
ongoing call on hold for a short while.
Press the Line key.
The call can be picked up on your extension within one minute, or if
not it will recall on your extension.
Press again to retake the call that has been put on hold.
Common Hold
Press the Line key.
Replace the handset.
The call can be picked up on any extension within one minute, or if
not it will recall on the holding extension.
Press again to retake the call that has been put on hold.
Or:
Pick-up on another extension:
Enter the extension number that put the call on hold.
Press.
BusinessPhone – Ericsson Dialog 4425 IP Vision
During Calls
Send Message
To send a message to an extension when you receive busy tone
or get no answer.
Callback message
9#
To send a Call Me message.
Press to send.
Voice message
99
*
9
#
To send a Voice message.
Press and speak.
Press to play-back and listen to your recording.
Press and speak to re-record.
Press to send.
BusinessPhone – Ericsson Dialog 4425 IP Vision
47
Call Forwarding
Call Forwarding
When you are not available to take calls or decide to answer your
calls on another extension, it is useful to forward your calls to an
alternate answering position. The alternate answering position can
either be a pre-programmed one (Diversion when your extension is
not active and a common one for: Fixed Diversion, Diversion when
there is no answer and Diversion when your extension is busy) or
an individual one.
If you urgently need to talk to someone who has forwarded his
calls, the system is also equipped with a bypass function.
Depending on the type of diversion, you are also able to record
your Personal Greeting for your mailbox, see section “Change your
Personal Greeting” on page 64.
Note: You can still make calls as usual.
Diversion when there is no answer
If you are not available to answer incoming calls (internal or
external), your system administrator can program your extension to
automatically divert calls to a pre-programmed diversion address
after a certain amount of time (default time: 15 seconds).
Diversion when your extension is busy
If your extension is busy and you receive an incoming call (internal
or external), your system administrator can program your extension
to automatically divert the call to a pre-programmed diversion
address.
48
BusinessPhone – Ericsson Dialog 4425 IP Vision
Call Forwarding
Diversion when your extension is not
active
If your extension is not active (logged off) your system administrator
can program it to automatically divert calls to a pre-programmed
diversion address.
Fixed Diversion
This function directs your calls to a pre-programmed answering
position (e.g. secretary).
*21#
Activate Fixed Diversion
Press activate diversion.
The displays shows:
Settings
+ 5O
CallList
Contacts
DIVERSION 9318-> 202
CorpDirectory
Web
12:46 12 Mar 2004
CHRISTOPH SMITH
9318
v
Log off
#21#
Absence
Cancel diversion
Press to cancel diversion.
Individual Diversion
This feature gives you the possibility to divert your calls to internal
and external positions, e.g. to any directory number, a colleague’s
extension, an external number or a common abbreviated number
(e.g. your car telephone).
BusinessPhone – Ericsson Dialog 4425 IP Vision
49
Call Forwarding
Program and activate Internal Diversion
Absence
Press (see display).
The displays shows:
Settings CallList
Absence
Follow-me
External Follow-me
Absence reason
Contacts
F
Exit
E or F
Select
z
OK
CorpDirectory
Web
12:46 12 Mar 2004
E
Select
Press (see display).
Repeat until the Follow-me menu is framed.
Press (see display).
Enter the answering position number and press (see display).
The displays shows:
Settings
+ 5O
CallList
Contacts
FOLLOW ME 9318-> 202
CorpDirectory
Web
12:46 12 Mar 2004
CHRISTOPH SMITH
9318
v
Log off
Absence
Cancel Internal Diversion
Absence
E or F
Select
Deactivate
50
Press (see display).
Press (see display).
Repeat until the Follow-me menu is framed.
Press (see display).
Press to deactivate (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
Call Forwarding
Program and activate External Diversion
To set a new Individual External Diversion address:
Note: To use the external diversion function, your extension
has to be authorized by the system administrator.
Absence
E or F
Press (see display).
Press (see display).
Repeat until the External Follow-me menu is framed
Settings CallList
Absence
Follow-me
External Follow-me
Absence reason
Contacts
F
Exit
z
Select
OK
CorpDirectory
Web
12:46 12 Mar 2004
E
Select
Press (see display).
Enter the digit or digits to get an external line and enter the
external number and press (see display).
The displays shows:
Settings
+ 5O
CallList
Contacts
DIVERSION 9318->EXTERNAL
CorpDirectory
Web
12:46 12 Mar 2004
CHRISTOPH SMITH
9318
v
Log off
BusinessPhone – Ericsson Dialog 4425 IP Vision
Absence
51
Call Forwarding
Cancel External Diversion
Absence
E or F
Select
Deactivate
Press (see display).
Press (see display).
Repeat until the External Follow-me menu is framed.
Press (see display).
Press to deactivate (see display).
Re-activate External Diversion
*22*#
í
52
Divert your calls to an external position.
Press to activate the programmed External Diversion.
You can make outgoing calls as usual. A special dial tone reminds
you that call forwarding is active.
Press.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Call Forwarding
Follow-me
If you are in another room, you can still answer your calls by
forwarding them to where you are. To activate Follow-me,
Individual Diversion must be active on your telephone.
Activate Follow-me
*21*
z*
z#
í
Note: This procedure has to be executed from the
telephone the calls are diverted to.
Press.
Enter your extension number and press.
Enter the new diversion address and press.
Verification tone.
Press to finish the procedure.
Cancel Follow-me
#21*
z#
í
Follow-me and Individual Diversion can also be cancelled from the
answering position.
Press.
Enter your extension number and press.
Verification tone.
Press to finish the procedure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
53
Call Forwarding
Bypass Call Forwarding
Bypass Call Forwarding allows you to call a specific extension even
if Call Forwarding is activated on this extension.
*60*
z
#
54
Note: To use this function, your extension has to be
authorized by the system administrator.
Press.
Enter extension number.
Press.
You will be connected to the specified extension, regardless of
which type of Call Forwarding the called extension has activated.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Absence Information
Absence Information
If you are not in the office for a certain period of time (e.g. meeting,
vacation, lunch, illness), this feature allows you to inform your
callers why you are absent. External callers will be routed to the
operator who also has access to your absence info.
Note: When you have activated a diversion with a Personal
Greeting, callers will receive this greeting even if you have
activated the Absence Information, see section “Change
your Personal Greeting” on page 64.
You can inform your callers with:
1) Pre-defined texts
Enter the reason for your absence and the date and time of
your return.
2) Voice information
Record a voice message and name the reason of your absence.
BusinessPhone – Ericsson Dialog 4425 IP Vision
55
Absence Information
Enter information
Pre-defined texts
Absence
E or F
Select
Press (see display).
Press (see display).
Repeat until the Absence Reason menu is framed.
Press (see display).
The displays shows:
Settings CallList
Absence
Follow-me
External Follow-me
Absence reason
Contacts
F
Exit
E or F
z
Select
OK
CorpDirectory
Web
12:46 12 Mar 2004
E
Select
Press until the desired absence type is framed (see display).
Press (see display).
Enter the time or date of return (if required) and press (see
display).
The display shows the reason, and if entered, time/date of return.
Settings
+ 5O
CallList
Contacts
4 MEETIBNG BACK 15:00
CorpDirectory
Web
12:46 12 Mar 2004
CHRISTOPH SMITH
9318
v
Log off
Absence
Pre-defined texts
Absent
Trip
Lunch
Meeting
Vacation
Illness
56
Completing Info
hour (00-23) minute (00-59)
month (01-12) day (01-31)
back at, hour minute
back at, hour minute
back, month day
back, month day
BusinessPhone – Ericsson Dialog 4425 IP Vision
Absence Information
*23*
9
*
9
#
í
Voice information
Press to enter information mode.
Press and speak.
Press to play-back and listen to your recording.
Press and speak to re-record.
Press to activate.
Press to finish the procedure.
Internal callers will hear the information via the handset or the
loudspeaker. External callers will be routed to the operator who
also has access to your absence info.
Note: You can dial your own extension number if you want
to check your information.
BusinessPhone – Ericsson Dialog 4425 IP Vision
57
Absence Information
Change information
*23*#
í
Save
Press to deactivate and save for later use.
Information is passive.
Press to finish the procedure.
Use saved information
*23*#
í
When the information is switched off:
Press to activate saved info.
Information is active.
Press to finish the procedure.
Erase information
Absence
E or F
58
Press (see display).
Press (see display).
Repeat until the Absence Reason menu is framed.
Select
Press (see display).
The No Absence menu is framed.
Select
Press (see display).
The programmed information is erased.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Mailbox System
Mailbox System
While you are away from the office, callers can leave messages in
your mailbox. You are also able to configure your mailbox with your
personal greeting, see section “Change your Personal Greeting” on
page 64.
The first time you enter the mailbox system (only possible from own
extension), you might be requested to change your password if it is
default (0000). See section “Change Password” on page 67 or
follow the voice announcements.
Note: To use the mailbox system, your extension has to be
authorized by the system administrator.
Activate the Mailbox
*21*
z
#
í
Divert your extension to the mailbox system.
Press.
Enter the number of the mailbox system.
Ask the system administrator for the defined mailbox system
number.
Press to activate the diversion.
Verification tone.
Press to finish the procedure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
59
Mailbox System
Note: For daily use, it is recommended to ask your system
administrator to define the mailbox system as your preprogrammed diversion address. Once this is defined, you
only have to dial *21# to activate your mailbox.
The system administrator can also define whether or not the
mailbox should be activated if you do not answer your
phone after a certain time or if your extension is busy.
#21#
í
Deactivate the Mailbox
Press.
Verification tone.
Press to finish the procedure.
New incoming calls will be signalled on your phone again.
Note The mailbox is still active if is defined as preprogrammed diversion address for the feature Diversion
when there is no answer and Diversion when your extension
is busy.
60
BusinessPhone – Ericsson Dialog 4425 IP Vision
Mailbox System
Access the Mailbox
The following mailbox functions can be accessed from your own
extension, any other internal extension or from an external position
(e.g. mobile phone)
•
Listen to available messages
•
Change your personal greeting
•
Send messages
•
Set up Outcall (External) Notification (configuration dependent)
•
Change your password
If there is a new message waiting, the Message key lamp is flashing
and you will hear a special dial tone after lifting the handset.
The displays shows:
Settings
+ 5O
CallList
Contacts
CorpDirectory
Web
12:46 12 Mar 2004
CHRISTOPH SMITH
9318
V
Log off
Message
ÕÔ
v
Absence
Access the mailbox from your own extension
Press
Listen and follow the voice announcements in the main menu.
Note: Depending on the configuration, you might be asked
for your password before you can enter your mailbox.
BusinessPhone – Ericsson Dialog 4425 IP Vision
61
Mailbox System
z
z
z
Access the mailbox from any other extension
Enter the directory number of the mailbox system.
Listen and follow the voice announcements in the main menu.
Access the mailbox from an external position
(e.g. mobile phone)
Enter the public number of your company.
Enter the directory number of the mailbox system.
Listen and follow the voice announcements in the main menu.
Listen to your Messages
Received messages are divided into the following three categories:
•
New messages (not heard); indicated by a flashing message led
and a special dial tone.
•
Heard messages; indicated by a lighting message led and a
special dial tone.
•
Stored messages; not indicated.
Note: Messages are deleted from the system after a certain
time. Please ask your system administrator regarding this.
1
z
62
Access the mailbox.
(See chapter “Access the Mailbox” on page 61.)
Listen and follow the voice announcements in the main menu.
Select to listen to available messages
Note: If there are no messages in your mailbox, the option
to listen to your messages will not be available.
Select one of the three message categories (new, heard,
stored).
Listen to your messages and follow the voice announcements in
the dedicated menu.
•
play message again
•
forward a message
•
get date and time info
BusinessPhone – Ericsson Dialog 4425 IP Vision
Mailbox System
í
•
pause during play
•
play previous message
•
store message
•
play next message
•
erase message
Note: Voice messages will be heard. “Call me” messages
will call the sender (these messages cannot be stored).
Press to finish the procedure.
Forward a Voice Message
A copy of your received voice messages (in the individual mailbox)
can be forwarded to other mailbox numbers (individual or
common). When you forward a voice message (heard or stored) to
an individual mailbox, the mailbox number is the same as the
extension number.
Note: The forwarded message is a copy, i.e. it can be
deleted without deleting the original message.
There are no distribution list numbers available. Forwarding
the same message to more than one mailbox must be done
in single operations.
BusinessPhone – Ericsson Dialog 4425 IP Vision
63
Mailbox System
Change your Personal Greeting
Depending on the type of call diversion to the mailbox, you can
leave three different personal greetings for the caller. You can
activate a diversion when a caller receives busy tone, when there is
no answer, or you can activate a fixed or individual diversion for all
your calls.
2
z
í
64
Access the mailbox.
(See chapter “Access the Mailbox” on page 61.)
Listen and follow the voice announcements in the main menu.
Select to change your Personal Greeting.
Select the desired diversion type
Listen and follow the dedicated voice announcements.
When you activate the diversion, the recorded greeting is played to
the next caller.
Press to finish the procedure.
Note: When you have activated a diversion with a Personal
Greeting, callers will receive this greeting instead of your
activated absence information.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Mailbox System
Send Messages via your Mailbox
With this function, the mailbox system allows you to record and
send messages from your mailbox to any other internal mailbox
without calling the respective mailbox owner. A recorded message
can either be sent to one or to multiple mailboxes.
Note: There are no distribution list numbers available.
Sending the same message to more than one mailbox must
be done in single operations.
3
Access the mailbox.
(See chapter “Access the Mailbox” on page 61.)
Listen and follow the voice announcements in the main menu.
Select to record and send messages.
Listen and follow the dedicated voice announcements.
Messages can be heard or re-recorded before they are sent to a
mailbox.
Note: A message can also be sent during a call, see “Send
Message” on page 47.
Outcall (External) Notification
With this function, the message system can notify you when new
voice messages arrive. You can specify an external number where
you will be called at a pre-programmed time or as soon as a new
message arrives.
Note: This feature may be restricted or not available. Ask
the system administrator for the availability and more
information.
You can be notified in two different ways (depending on the
programming of the system):
•
Notification with mailbox access:
You acknowledge the notification via your password (has to
differ from the default value 0000). See section “Change
Password” on page 67 to select a new password. You have full
access to the mailbox system.
BusinessPhone – Ericsson Dialog 4425 IP Vision
65
Mailbox System
•
Notification without mailbox access:
You get a short voice announcement informing you that
someone has left a message for you. You acknowledge the
notification by pressing any key. You have to call back the
mailbox system to retrieve the message.
Note: If you do not acknowledge the notification within the
pre-programmed time, the connection is cancelled and
repeated later (ask the system administrator for the
programmed number of notification attempts).
4
Access the mailbox.
(See chapter “Access the Mailbox” on page 61.)
Listen and follow the voice announcements in the main menu.
Select to set up outcall notification.
Listen and follow the dedicated voice announcements.
You can program the external notification number, the notification
time and activate/deactivate the function. The external number
(including the digit(s) for external line access) can consist of up to
24 digits. The time is entered in 24h-format, e.g. 2030 for half past
eight with values automatically set to even quarters, i.e. 2013 will
be 2015.
í
66
Note: The notification number and time must be
programmed before you activate the notification.
Press to finish the procedure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Mailbox System
Change Password
Change the password via your mailbox
5
í
#*72*
z
*
z
#
í
Access the mailbox.
(See chapter “Access the Mailbox” on page 61.)
Listen and follow the voice announcements in the main menu.
Select to change the password.
Listen and follow the dedicated voice announcements.
Press to finish the procedure.
Note The password can also be changed without
accessing the mailbox by using the procedure “Change
Password” on page 67.
Change the password via the telephone
Press to select a new password.
Enter your present password.
The default password is 0000.
Press.
Enter your new password.
Press.
Verification tone.
Press to finish the procedure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
67
Mailbox System
Dictaphone Function
If you want to record and retrieve personal voice messages you,
can use the Dictaphone function. A Dictaphone message is treated
as a normal message. For information on how to retrieve
Dictaphone messages, see section “Listen to your Messages” on
page 62.
Record message
68
u
*58#
To start the recording:
*
9
#
í
Select options below:
Lift the handset.
Press and record your message.
The maximum recording time is four minutes and 15 seconds.
Press to play-back.
Press and speak to re-record.
Press to stop the recording and save the message.
Press to finish the procedure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Contacts (Phone Book)
Contacts (Phone Book)
You can store your most frequently used numbers in Contacts
(Dialog 4425 v.2) or in PhoneBook (Dialog 4425 v.1) locally in
your phone. The Contacts (PhoneBook) can be stored centrally on
a server. For details please ask your system administrator.
There are a number of ways to add numbers and names into your
phone:
Ç
1
Enter the name and number by using the digits 0-9 on the
keypad, in the same way as with a mobile phone.
2
Add an incoming call from the Call List into Contacts
(PhoneBook).
3
From a PC browse into the phone using a standard web
browser and enter the name and number.
See section “Web Server” on page 112.
4
From the PC application “My Dialog 4000 Contacts” you
can add your Microsoft® Outlook® contacts to Contacts
in your phone (Dialog 4425 v. 2 phone only).
See section “Add Microsoft Outlook Contacts” on page 110.
Select the Contacts (PhoneBook) tab with the Navigation
keys (see display).
The Contacts (PhoneBook) menu is displayed.
Settings CallList
Dial name
Edit
Delete
Add
Exit
BusinessPhone – Ericsson Dialog 4425 IP Vision
Contacts
F
CorpDirectory
E
Web
Select
69
Contacts (Phone Book)
F E
or
Select
Press to choose a menu option (see display).
Press (see display).
Dial Name
You can call someone by pressing the first character(s) of a name
and then scroll the name list to search for the name and number.
29
-
Call
F E
or
Option 1:
Press and hold for 1 second.
Up to five Phone Book entries starting with the same letter as the
letter above the key are displayed.
Press to make the call (see display).
Or:
Press to scroll the list (see display).
Note: If you press and hold the key 2 for more than a
second, up to five entries starting with A are displayed.
If the search result comprises more than five entries, use
the F or E menu key to scroll the list.
70
BusinessPhone – Ericsson Dialog 4425 IP Vision
Contacts (Phone Book)
Ç
Select
Option 2:
Select the Contacts (PhoneBook) tab with the Navigation
keys (see display).
Press (see display).
Settings
CallList
Contacts
CorpDirectory
Web
Dial name
Enter name
z
Search
F E
or
Call
Exit
Search
Press the key with the corresponding letter until the initial
letter of the name is displayed.
Press (see display).
The first name beginning with the selected character is displayed.
Press to scroll the list (see display).
Press to make the call (see display).
Add a name and number to Contacts (Phone Book)
There are several ways to add number and names to the Phone
Book:
•
Using the keypad (0-9), see section “Write Text” on page 90.
•
Adding a Call List entry to the Phone Book, see section “Call
List” on page 37.
•
Browse the telephone using a standard web browser and enter
the name and number.
The following text describes how to enter a name and number with
the Phone Book menu and the keypad.
BusinessPhone – Ericsson Dialog 4425 IP Vision
71
Contacts (Phone Book)
Ç
E
Select
Select the Contacts (PhoneBook) tab with the Navigation
keys (see display).
Press to mark the Add option (see display).
Press (see display).
Settings
Add
CallList
Contacts
CorpDirectory
Web
Enter name:
z
Exit
Save
Enter the name and press (see display).
Settings
Add
CallList
Contacts
CorpDirectory
Web
Enter number:
z
Exit
Save
Enter the number and press (see display).
Settings
Add
CallList
Contacts
CorpDirectory
Web
BROWN JANE
Edit
OK
4736
OK
Press to save (see display).
The name and number are stored in the Phone Book.
Or:
Edit
72
Press to edit the name and number again (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
Contacts (Phone Book)
Ç
E
Select
Edit a name and number in Contacts (PhoneBook)
Select the Contacts (PhoneBook) tab with the Navigation
keys (see display).
Press to mark the Edit option (see display).
Press (see display).
Settings
Edit
CallList
CorpDirectory
Contacts
Web
Enter name: Br
z
Exit
Search
F E
or
Erase
Search
Enter the first character(s) of the name and press
(see display).
A list with up to five entries appears. The first name beginning with
the selected characters is marked. To correct a typing error, just
press Erase.
Press to scroll the list (see display).
When the entry is found and marked with a frame:
Select
Press to select the marked name (see display).
The Edit menu opens.
Settings
Edit
CallList
Contacts
CorpDirectory
Web
BROWN JANE
4736
F
Exit
Edit
E
Edit
Press (see display).
Settings
Edit
CallList
Contacts
CorpDirectory
Web
BROWN JANE
Exit
Erase
4736
Number
Erase
Save
Press multiple times to erase the name (see display).
Each time you press the Erase menu key, one character is deleted.
BusinessPhone – Ericsson Dialog 4425 IP Vision
73
Contacts (Phone Book)
z
Save
Number
z
Erase
Save
OK
Enter the new name completely and press (see display).
Press (see display).
The cursor moves to the end of the number.
Press multiple times to erase the number (see display).
Each time you press the Erase menu key, one digit is deleted.
Change the number and press (see display).
Press to save (see display).
The edited name and number are stored in the Phone Book.
Or:
Edit
74
Press to edit the name and number again (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
Contacts (Phone Book)
Ç
E
Select
Delete a name and number in Contacts (PhoneBook)
Select the Contacts (PhoneBook) tab with the Navigation
keys (see display).
Press (see display).
Press until Delete is marked in the display.
Press (see display).
Settings
Delete
CallList
Contacts
CorpDirectory
Web
Enter name:
z
Exit
Search
F E
or
Search
Enter the first character(s) of the name and press (see
display).
A list with up to five entries appears. The first name beginning with
the selected characters is marked.
Press to scroll the list (see display).
When the entry is found and marked with a frame:
Delete
OK
Press (see display).
The name and number that will be deleted are shown in the
display.
Press to delete the name and number (see display).
The name and number is deleted from the Phone Book.
Or:
Cancel
Press to abort (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
75
System Phonebook
System Phonebook
Compared to the “Contacts (Phone Book)” on page 69, which is an
IP phone function, the System Phonebook is stored in the
BusinessPhone the system.
The System Phonebook covers internal directory numbers as well
as external common abbreviated numbers.
As the System Phonebook is available for several telephone types
the access as well as the navigation within the Phonebook is kept
generic which means it will be controlled via the normal keypad.
*0#
#0*
í
76
Use the System Phonebook
Press to search for internal directory numbers
Or:
Press to search for common abbreviated numbers
To exit the System Phonebook
Press to exit
BusinessPhone – Ericsson Dialog 4425 IP Vision
System Phonebook
¿
#
Make a Call
Enter the first letter(s) of the name.
When pressing a key, the first available character on that specific
key is displayed. To get the following characters, press the key
repeatedly. Key 0 and 1 contain special characters. The marked
character is selected after a time-out (3 seconds) or when another
key is pressed.
Note: In order to step through the whole System
Phonebook, you can start the search function immediately
without entering the first letter(s) of the name.
Press to activate the search function
Search routine was successful
Line
0
*
ÕÔ
The first entry which matches with your entered letter(s) will be
displayed.
Press to scroll forward in the list
Or:
Press to scroll backward in the list
By reaching the beginning or the end of the list a short beep tone
will be sent.
Press to call the desired list entry
Search routine was not successful
If no entry fulfils the search criteria, the display shows:
1
“SORRY - NO SUCH NAME”.
Press to start a new search
BusinessPhone – Ericsson Dialog 4425 IP Vision
77
Group Features
Group Features
When you are working together in a team the following group
facilities can be very useful.
Key system
With this function, all (or selected) external lines are represented by
pre-programmed keys on all phones. For each external line, a
Function key has to be programmed. Which means that you are
able to monitor the state of traffic for every programmed external
line (e.g. free, busy). You can also establish an external call by
pressing the External Line key.
Answer an external call
External Line
ÖÔ
To answer an external call, just press the flashing key. (Depending
on the programming of the system, an incoming external call will be
announced with a flashing Line key and a ringing signal.)
Press (pre-programmed).
Speech connection with the caller.
Make an external call
External Line
78
Ô
z
To initiate an external call, just press the External Line key. The
external line will be seized automatically.
Press a free Line key (pre-programmed).
Enter the desired number.
If you make external calls in this way, you do not have to dial the
digit(s) for external call access first.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Group Features
Supervision/Telephone Attendance
A Function key can also be programmed for Supervision and
handling calls for a group of extensions. If a Supervision/
Attendance key is programmed on your telephone, you are able to
call the other group members or answer incoming calls for the
group by pressing the key and monitor the activity of other
extensions (free, busy, called).
Michael
Michael
Michael
ÕÔ
Ô
ÖÔ
Traffic situation
Ongoing conversation (lamp is on).
Free extension (lamp is off).
The extension is called (flashing lamp).
Pick-up calls for the group
Michael
Michael
ÖÔ
Ô
Your colleague’s extension is indicated on your phone by a
pre-programmed key.
Press to answer the calls directly (pre-programmed).
A flashing lamp beside the key indicates an incoming call.
Call a group-member
Press to make a call (pre-programmed).
Note: If the key is flashing, you will automatically pick-up
your colleague’s ongoing call.
BusinessPhone – Ericsson Dialog 4425 IP Vision
79
Group Features
Group Call-pick-up
z
In a Pick-up group, any member can answer any individual call to
group members. You answer a call to the group by dialling a
special answering number. Please ask your system administrator
for the configured number.
Enter the group Call-pick-up code.
Common Bell
z
The Common Bell function allows all extensions of the system
(operator included) to pick-up the call from an extension that has
been predefined as a Common Bell extension.
Enter the Common Bell pick-up code.
Please ask your system administrator for the Common Bell pick-up
code.
If two or more extensions simultaneously attempt to answer a call
from the Common Bell extension, only the first extension will pick it
up. The other extensions will receive the number unobtainable
tone. This will also happen if you dial the Common Bell pick-up
code and there are no calls waiting at the Common Bell extension.
Note: You can also program the Common Bell code on a
Function key.
Group Hunting
Your telephone can be included in one or several hunt groups. In a
hunt group all members are represented with one common
directory number. 16 hunt groups can be programmed, each
containing 1 to 20 members. A member can be either an extension
number, an operator console or a fictive number. Please ask your
system administrator if you require this function.
Note: The number of cordless extensions in a hunt group
are limited to eight (including Tandem configurations).
80
BusinessPhone – Ericsson Dialog 4425 IP Vision
Group Features
Incoming calls to the hunt group are directed to free extensions in
the group. The hunt order within the group can be changed to suit
your needs. If all members of the hunt group are busy, an incoming
call is being queued. If no one answers this call before the
programmed time, the call is forwarded to the programmed
answering position (e.g. operator).
Note: If all members in a hunt group are busy, the Callback
or Intrusion function is not available.
Log in
Before you can answer group hunting calls, you must log in.
To log in to one hunt
group:
*28*
z
#
í
Press.
Enter the hunt group code.
Please ask your system administrator for the configured number.
Press.
Verification tone.
Press to finish the procedure.
To log into all hunt
groups:
*28*
*#
í
Press.
Verification tone.
Press.
Press to finish the procedure.
Answer calls
Answer Group Hunting calls in the normal way.
BusinessPhone – Ericsson Dialog 4425 IP Vision
81
Group Features
Log out
To log out from one
specific hunt group:
#28*
z
#
Press.
Enter the hunt group code.
Please ask your system administrator for the configured number.
Press.
The display shows:
Settings
+ 5O
CallList
Contacts
PBX . GROUP LOGGED OUT
CorpDirectory
Web
12:46 12 Mar 2004
CHRISTOPH SMITH
9318
v
Log off
Absence
1 Missed
To log out from all hunt
groups:
#28**#
82
Press.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Other Useful Features
Other Useful Features
By using these features your productivity will be increased, e.g. you
can set reminders for important meetings, place the cost for
external calls on separate accounts, listen to music via the
loudspeaker and much more...
Tandem configuration
The Tandem configuration is a unit, consisting of two telephones
using the same directory number. One of the telephones is defined
as the primary and the other one as the secondary. This function
enhances the communication for users that, for example, have a
wired phone on their desk (the primary telephone) and need to be
mobile within their company’s building with their own portable (the
secondary telephone). Basically the Tandem configuration works
as follows:
*28#
í
To activate the Tandem configuration
Press to log on the secondary telephone.
Press to finish the procedure.
The display shows:
Settings
+ 5O
CallList
Contacts
SECOND USER LOGGED ON
CorpDirectory
Web
12:46 12 Mar 2004
CHRISTOPH SMITH
9318
v
Log off
BusinessPhone – Ericsson Dialog 4425 IP Vision
Absence
1 Missed
83
Other Useful Features
For incoming calls:
•
Both telephones are treated as 1 single extension.
For outgoing calls:
•
#28#
Both telephones are treated as 2 separate extensions.
To deactivate the Tandem configuration
Press to log off the secondary telephone.
For incoming calls:
•
The secondary telephone cannot be called and the primary
telephone works as a normal stand-alone telephone.
For outgoing calls:
•
Line
84
Ô
z
í
Both telephones are treated as 2 separate extensions.
Transferring a call between members of a Tandem unit
Press.
Enter own directory number.
Press to finish the procedure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Other Useful Features
Reminder
*32*
z#
í
#32#
í
The phone can be set to remind you at any time within the next
24 hours (multiple settings are allowed).
Press.
Enter Reminder time and press.
(00-23) hour + (00-59) minute. When the time is reached your
phone rings with recall signal.
Note: If you receive busy tone, your extension does not
have the authority to set a Reminder.
Press to finish programming.
When the Reminder time is reached, your phone rings with recall
signal.
Cancel Reminder
Enter to cancel all settings.
Press to finish the procedure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
85
Other Useful Features
Doorphone
The Doorphone is used to monitor the admission to your company,
i.e you can open the doorlock from your phone.
u
Answering Doorphone calls
Lift the handset.
You will be in speech connection with the calling party.
Opening of the doorlock
Line
ÖÔ
z
After you have answered the Doorphone, you can open the door
making an inquiry to the door-opener’s directory number.
Press.
Enter the door-opener´s directory number.
Please ask your system administrator for the number.
Note: You can also program the door-opener’s directory
number as a Common Abbreviated Number or a Function
key.
86
BusinessPhone – Ericsson Dialog 4425 IP Vision
Other Useful Features
Direct Inward System Access (DISA)
If you are working externally and you have the need to make
business calls, call your company and use the company PBX to
make an external call to the desired party. You just pay the costs
for the phone call to your company. The other costs will
automatically be placed on your extension number or on a special
project.
Note: To activate this function, you have to change the
default Password from 0000 to a personal one. Which code
to use and how to change it, see section “Change
Password” on page 67.
z
z
z
You can also divert calls from your office extension to your external
position, see section “Call Forwarding” on page 48. During the
procedure you will be prompted for your Password.
Enter the public number of your company.
Followed by the DISA number.
Ask the system administrator for the defined DISA number.
Note: If you want to register the call on an Account
Number, you should use the Account Number procedure
before you enter the external number, see section “Account
Number” on page 88.
Enter the external number.
Or:
Use the External Diversion function.
Procedure, see section “Call Forwarding” on page 48.
Note: If you program a new diversion address, remember
to reset it when you return to your office.
BusinessPhone – Ericsson Dialog 4425 IP Vision
87
Other Useful Features
Account Number
An Account Number can be entered to debit telephone costs to
different accounts. Depending on the system configuration the
Account Number has to be entered from a Verified Account
Number list (predefined) or you can invent an own Account
Number. The following prerequisites apply:
•
With the Verified Account Number you can restrict the making
of external calls (not a specific number or area), so everyone
who is allowed to make external calls will receive an Account
Number which has to be used each time he/she wants to make
an external call.
•
Verified Account Numbers contain up to 10 digits.
•
Own Account Numbers contain up to 15 digits.
The Account Numbers can also be used via the DISA function, see
section “Direct Inward System Access (DISA)” on page 87.
Verified or own Account Number
*9*
z#
Before an outgoing call:
Press.
Enter Account Number and press.
Valid digits 0-9. Internal dial tone. Make the external call.
DTMF Tones
z
88
The DTMF function - also known as Suffix Dialling - is used to
control answering machines or any other telecommunication
devices. This function is permanently active during a call.
Make an internal or external call to reach the desired device.
When your call is answered you can continue to dial digits which
will be sent as DTMF digits (tone signals) to the called device in
order to activate the desired functions.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Other Useful Features
Least Cost Routing
Least Cost Routing (LCR) automatically selects the cheapest way
to establish the connection to the desired external number.
Please ask your system administrator if this function is installed in
your system.
If the extension has been configured to use LCR, each external call
will be analysed and the cheapest way will be selected.
0z
Use Least Cost Routing
Enter the digit(s) for external line access and the the desired
public number.
The usual way of making an outgoing external call.
Note: Which digit to press for external line access depends
on the configuration of the system.
Calling Least Cost Routing
z
0z
If LCR has been installed in your system, but your extension is not
configured to use it automatically, you also have the opportunity to
get the cheapest connection by dialling the LCR code before you
dial an external number.
Enter the LCR code.
Please ask your system administrator for the LCR code.
Enter the digit(s) for external line access and the the desired
public number.
Note: Which digit to press for external line access depends
on the configuration of the system.
You can also program the LCR code on a Function key.
BusinessPhone – Ericsson Dialog 4425 IP Vision
89
Write Text
Write Text
It is necessary to write text, e.g. when you want to add an entry to
the integrated telephone directory.
Select characters by pressing digits repeatedly.
Additional, the available characters of a key are displayed below
the name and number:
Settings
Add
CallList
Contacts
CorpDirectory
Web
Enter name: BROWN JANE
JKL5
Exit
Erase
Save
Note: If the word to enter contains a digit, the digit can be
created by pressing the digit key for more than 1 second.
5
*
ì
ì
90
Example:
Press a digit.
1 time
result
2 times
result
3 times
result
4 times
result
Note: Key
J
K
L
5
1 is reserved for special characters.
Press to toggle between upper and lower case.
Press the Volume Up key to enter the character.
Moves cursor to next position. Use also for space.
Press the Volume Down key as backspace to erase incorrect
entry.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Write Text
Example:
444 ì
66 ì
*
Enter the first character code, followed by the Volume Up
key.
This sequence - numbers always followed by the Volume Up
key - gives the word IN_ .
Note: You can also write the following characters:
? -., !: /# *
Press repeatedly.
BusinessPhone – Ericsson Dialog 4425 IP Vision
91
Settings
Settings
In order to satisfy your personal needs, the BusinessPhone
Communication Platform and your IP telephone are equipped with
many options for an individual configuration.
The following settings and programmable functions are available
when you have logged on to your IP telephone:
•
Programmable Keys
•
Ring Character
•
Time & Date
•
Language
•
Display Contrast
•
Display Contrast (Dialog 4425 v. 2 only)
•
Log Off Restriction
•
Option Unit (can be selected only if an Option Unit is connected)
•
Hearing Level
•
Display the network settings
When you select a setting on the left side, the display will show
additional information, for example:
Settings CallList
Programmable Keys
Ring Character
Time & Date
Language
Display Contrast
Exit
92
Contacts
F
CorpDirectory
E
Web
Select
BusinessPhone – Ericsson Dialog 4425 IP Vision
Settings
Settings menu options:
Exit
F E
or
Select
Save
Cancel
To return to the previous menu.
Press to browse through the menus (see display).
Press to select the menu option marked on the left side of the
display (see display).
Press to save a setting (see display).
Press to abort the process (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
93
Settings
Programmable Keys
If you frequently use certain functions or call certain numbers, you
may store them on the programmable keys of your telephone.
Stored numbers can consist of a maximum of 24 digits. To use the
function or call the number, just press the key.
Note To allocate a Supervision function to a programmable
key please contact your system administrator.
Settings
Select
Select with the navigation keys (see display).
Press to select Programmable Keys (see display).
The programmable keys format menu is displayed.
Settings CallList
Programmable Keys
Contacts
CorpDirectory
Web
Press the key to program
Ô
Exit
Press the desired programmable key.
Note: The Message and Line key are pre-defined and
cannot be used as programmable keys.
If a Supervision function has been programmed by the system
administrator, the key can not be programmed by you and the
display shows.
Settings CallList
Programmable Keys
MNS key: 202
Contacts
CorpDirectory
Web
Cannot be changed
Back
If the key has been programmed previously by you, the function or
telephone number programmed is shown in the display.
Settings CallList
Programmable Keys
Current number:
Contacts
CorpDirectory
Web
Enter new number: 0
Cancel
94
Erase
Save
BusinessPhone – Ericsson Dialog 4425 IP Vision
Settings
*z#
Save
Exit
Enter a function code (4 digits).
Press to store the code (see display).
Press to return to the previous menu (see display).
Note: If you want to delete the last entered digit, press
Erase once. If you want to delete the complete number,
press Erase until no number is displayed.
Exit
Press again to exit to the settings menu (see display).
Ring Character
There are 10 different programmable ringing signal characters on
your telephone, each corresponding to a digit between 0 and 9.
Settings
E
Select
Select with the navigation keys (see display).
Press to display the Ring Character menu (see display).
Press to select ring character (see display).
The ring character menu is displayed.
Settings CallList
Ring Character
Current ring character: 5
Contacts
CorpDirectory
Web
Enter new character (0-9): 8
z
Save
Cancel
Exit
Cancel
Save
Press the corresponding digit (0-9).
The telephone rings with the chosen character.
Press to store the character and return to the previous menu
(see display).
Press to abort the process without saving (see display).
Press to return to the previous menu (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
95
Settings
Time and Date
The time and date is updated by the exchange automatically. You
can only set the date and time format.
Note: The Time and Date functions require certain
installation options. If you are unable to change the time and
date format please contact your system administrator.
To set the time format
Settings
E
Select
Select with the navigation keys (see display).
Press to mark the Time & Date menu (see display).
Press to open the menu (see display).
The Time Format menu is displayed.
Settings CallList
Time & Date
Time Format
Date Format
Time
Date
Exit
Select
Contacts
F
E
Web
Select
Press to select Time Format (see display).
Two time formats are available: 24 hour mode and 12 hour mode.
Settings CallList
Time Format
s 24 hour
r 12 hour
Cancel
96
CorpDirectory
Contacts
F
CorpDirectory
E
Web
Select
BusinessPhone – Ericsson Dialog 4425 IP Vision
Settings
F
Select
Press to change the time format (see display).
Press to select the highlighted format (see display).
To set the date format
Settings
E
Select
E
Select with the navigation keys (see display).
Press to mark the Time & Date menu (see display).
Press to open the menu (see display).
Press to mark the Date Format option (see display).
Settings CallList
Date Format
r 28 07 2003
s 28 Jul 2003
r Mo 28 Jul 2003
r 030728
Cancel
F E
Contacts
F
CorpDirectory
E
Web
Select
or
Press to browse through the different formats (see display).
Select
Press to select the highlighted format (see display).
Exit
Press to return to the previous menu (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
97
Settings
Language
Note: If this function is not available, please contact your
system administrator.
To change the language:
Settings
E
Select
Select with the navigation keys (see display).
Press to mark the Language menu (see display).
Press to display the Language menu (see display).
Settings CallList
Language
Menus
Input
Exit
Select
98
F
CorpDirectory
E
Web
Select
Press to select the Display Menus option (see display).
The language format menu is displayed, showing the available
languages, for example:
Settings CallList
Menus
English
Francais
Deutsch
Espanol
Exit
F E
Contacts
Contacts
F
CorpDirectory
E
Web
Select
or
Press to browse through the different language settings
(see display).
Select
Press to select the marked language (see display).
Exit
Press to return to the previous menu (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
Settings
Display contrast
The display contrast can be changed.
Change the contrast on the display
Settings
E or F
Select
Select Settings in the top menu (see display).
Press (see display).
Repeat until the Display Contrast menu is framed.
Press (see display).
The displays shows:
Settings CallList
Display Contrast
Cancel
- or +
Contacts
-
CorpDirectory
Web
+
Press to decrease or increase the contrast (see display).
Note: The menu key Cancel can be used to leave the menu
without saving the changes.
Save
Exit
Æ
Press to store the contrast level (see display).
Press to return to the previous menu (see display).
or.
Press to return to idle mode.
BusinessPhone – Ericsson Dialog 4425 IP Vision
99
Settings
Backlight
(Dialog 4425 v. 2 phone only).
The display backlight level can be changed.
Change the backlight level on the display
Settings
E or F
Select
Select Settings in the top menu (see display).
Press (see display).
Repeat until the Display Backlight menu is framed.
Press (see display).
The displays shows:
Settings CallList
Backlight
Cancel
- or +
Contacts
-
CorpDirectory
Web
+
Press to decrease or increase the contrast (see display).
Note: The menu key Cancel can be used to leave the menu
without saving the changes.
Save
Exit
Æ
100
Press to store the contrast level (see display).
Press to return to the previous menu (see display).
or.
Press to return to idle mode.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Settings
Option unit
If your phone is equipped with an option unit, you can use this
menu to select the function of the option unit.
Change the function of the option unit
Settings
E or F
Select
Select Settings in the top menu (see display).
Press (see display).
Repeat until the Option unit menu is framed.
Press (see display).
The displays shows:
Settings CallList
Contacts
Option Unit
s Extra Bell
r Busy Signal
r Combined Bell / Busy Signal
Cancel
E or F
F
CorpDirectory
Web
E
Press to change between the functions (see display).
• Extra Bell: The extra bell is activated in parallel with the ring
signal. A free on second call does not activate the extra bell
function.
•
Busy Signal: The busy signal is activated when your phone is
busy (i.e. during calls). The function can be used to control e.g.
a Do-not-disturb lamp at the door.
•
Combined Bell / Busy Signal: Activated in parallel with the ring
signals and steady active when your phone is buys (i.e. during
calls). A free on second call does not activate the extra bell
function.
Note: The menu key Cancel can be used to leave the menu
without saving the changes.
Select
Exit
Æ
Press to store the selected function (see display).
Press to return to the previous menu (see display).
or.
Press to return to idle mode.
BusinessPhone – Ericsson Dialog 4425 IP Vision
101
Settings
Handset and loudspeaker volume
ì
Use the Volume keys to change the volume of the handset or
loudspeaker during a call. Adjust the handset listening volume
when the handset is off hook. Adjust the loudspeaker volume when
dial tone is heard via the loudspeaker, or during a handsfree call.
Press to change the volume.
The handset and loudspeaker volume level is stored.
Hearing level settings
Å
E or F
Select
It is possible to get +6 dB increased hearing level in the handset
and the headset.
Select Settings in the top menu (see display).
Press (see display).
Repeat until the Hearing Level menu is framed.
Press (see display).
The current hearing level is framed and marked.
Settings CallList
Hearing Level
s Standard
r Increased
Cancel
E or F
Contacts
F
CorpDirectory
Web
E
Press to toggle between the values Standard and Increased
(see display).
Note: The menu key Cancel can be used to leave the menu
without saving the changes.
Select
Exit
Æ
102
Press to store the framed hearing level (see display).
Press to return to the previous menu (see display).
Or.
Press to return to idle mode.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Settings
Ring signal volume
ì
Use the Volume keys to adjust the ring signal volume when the
phone is in idle mode or ringing. Adjusted volume is stored.
Press to change the volume.
Note: The volume will return to the default level in case of a
power failure.
Mute ring signal
É
You can suppress the ring signal for an incoming call.
Press to suppress the ring signal.
The ring signal is switched off for the current call, and your phone is
automatically set to silent ringing (see below).
Silent ringing
If you do not want to be disturbed by the ring signal but still want to
be able to answer an incoming call, you can switch off the ring
signal. Incoming calls are only indicated by a flashing line lamp and
display information.
É
When the phone is in idle mode, or when ringing:
Press to switch off the ring signal.
The Mute key lamp is switched on and the Volume level bar is
replaced by the Ringer off symbol to indicate silent ringing. The ring
signal will automatically be switched on the next time you lift the
handset or press any key.
BusinessPhone – Ericsson Dialog 4425 IP Vision
103
Settings
Network settings
Settings
E
Select
Select with the navigation keys (see display).
Press to mark the Network menu (see display).
Press (see display).
The following network options are available for viewing only:
•
DHCP
•
IP Address
•
Subnet Mask
•
Default Gateway
•
SW server from DHCP
•
SW server
•
Proxy Server
•
Gatekeeper Discovery
•
Gatekeeper
•
Password (IP telephone)
Note: If you have a question concerning your network
settings, please consult your system administrator.
Exit
104
Press to return to the previous menu.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Settings
Alternative programming for Automatic
Callback, Camp-on, Intrusion
The associated number for using the Automatic Callback, Campon or the Intrusion function may vary from country to country. If you
cannot use a code of a function, maybe your exchange system has
been programmed with a different associated number.
Because this User Guide describes only the default programming,
the following table shows the most common settings in some of
these countries that are known for a different programming.
Austria, Belgium,
Brazil, Denmark,
Germany
Camp-on
Automatic Callback
Call pick-up
(Answer calls to another extension)
Intrusion
BusinessPhone – Ericsson Dialog 4425 IP Vision
5
6
8
4
105
Accessories
Accessories
This chapter describes optional features that can be used together
with your BusinessPhone telephone.
Key panel
Your phone can be equipped with 1-4 additional key panels (type
DBY 419 01). Each key panel offers 17 additional keys. Each key
can be programmed as dial by name keys, function keys, etc. See
section “Programmable Keys” on page 94. For installation see
section “Install key panels” on page 138.
Use the DCM (Designation Card Manager) to make and print your
own key panel designation cards. DCM is included on the
Enterprise Telephone Toolbox CD or it can be downloaded from:
http://www.ericsson.com/enterprise/library/manuals.shtml
For more information, please contact your Ericsson Enterprise
certified sales partner.
106
BusinessPhone – Ericsson Dialog 4425 IP Vision
Accessories
Headset (optional)
How to install the headset, see section “Installation” on page 132.
You can set your IP telephone to headset preset mode. This way
you can make calls without lifting the handset.
Activate headset preset mode
Í
When the headset preset mode is turned off:
Press and hold the Headset key for 4 seconds.
Now the Headset preset mode is activated (headset symbol is
shown in the display). All calls can be handled via the headset.
Deactivate headset preset mode
Â
When the headset preset mode is turned on:
Press and hold the Loudspeaker key for 4 seconds.
The Headset preset mode is deactivated.
BusinessPhone – Ericsson Dialog 4425 IP Vision
107
Accessories
Answer calls
Line
Í
If the headset preset mode is deactivated:
ÖÔ
í
If the headset preset mode has been activated:
Í
Make calls
z
í
Press the flashing Line key to answer.
Press to terminate a Headset call.
Press the Headset key.
Note: You do not need to press the Headset key in headset
preset mode.
Enter the number.
Press to terminate the call.
u
Headset to handset
Í
d
Handset to headset
Â
108
Press the Headset key.
Lift the handset.
Press the Headset key.
Replace the handset.
Headset to handsfree
Press.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Accessories
Í
Handsfree to headset
Press the Headset key.
Pull-out Leaf (optional)
The pull-out leaf is used for a personal phone number list and is
installed under the phone. See also section “Install pullout leaf
(optional)” on page 140.
Use the Designation Card Manager to make and print your own
card for the pull-out leaf. The Designation Card Manager is
included on the Telephone Toolbox CD for the BusinessPhone
Communication Platform.
BusinessPhone – Ericsson Dialog 4425 IP Vision
109
Add Microsoft Outlook Contacts
Add Microsoft Outlook Contacts
(Dialog 4425 v. 2 phone only).
My Dialog 4000 Contacts
My Dialog 4000 Contacts is a PC application which you can use
when you want to download your Microsoft® Outlook® contacts to
Contacts in your phone.
Note: It is recommended to store all your phone numbers
in Microsoft Outlook with area and country code including
the international “+” sign.
Install My Dialog 4000 Contacts
The PC application must be installed on your PC (network access
required), your system administrator should provide a link to the
installation page.
On the installation page:
Make sure you have the necessary information to complete
the installation (see installation page).
When you have the necessary information:
Click on Install My Dialog 4000 Contacts now to start the
installation.
When the installation is complete the My Dialog 4000 Contacts
icon is added to your desktop.
110
BusinessPhone – Ericsson Dialog 4425 IP Vision
Add Microsoft Outlook Contacts
Add Microsoft Outlook contacts
Start “My Dialog 4000 Contacts” on your PC.
Enter your phone number, password and IP address.
The default password is Welcome. To find your IP address, see
section “Menu structure Dialog 4425 v. 2 phone” on page 17.
OK
Add>>
Save
Click.
Available Microsoft Outlook contacts are listed on the left side and all
contacts already in Contacts in your phone are listed on the right
side.
Mark the required contacts on the left hand side and click.
Selected Microsoft Outlook contacts are moved to Contacts in
your phone.
Click to save the contacts.
The contacts are now available in Contacts in your phone.
Note: Contacts in your phone can contain up to 1000
entries.
Exit My Dialog 4000 Contacts
Exit
Click to exit the PC application.
BusinessPhone – Ericsson Dialog 4425 IP Vision
111
Web Server
Web Server
You can access your IP phone from a PC web browser to edit the
telephone data. The available data depends on which telephone
version (Dialog 4425 v. 1 phone or Dialog 4425 v. 2 phone) you are
using.
112
•
Contacts: (Dialog 4425 v. 2 phone only) Add, change or delete
entries in Contacts.
•
PhoneBook: (Dialog 4425 v. 1 phone only) Add, change or
delete entries in PhoneBook.
•
Call List: View the list, make a call to a number in the list and
delete items. It is also possible to add numbers to Contacts
(PhoneBook).
•
Settings: Add, change and delete Dial by function key numbers
for the programmable keys.
•
Settings: Change the hearing level setting (standard or
increased).
•
Settings: (Dialog 4425 v. 2 phone only) Change the ring signal
tone character (a digit between 0-9).
•
Password: (Dialog 4425 v. 1 phone only) Change the web
interface password.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Web Server
Read Out the IP-Address of the
Web Server
Before you can access the web server, you need to find out the
IP address through your telephone display.
Settings
E
Select
Select the Settings tab with the Navigation keys (see display).
Press to mark the Network menu (see display)
Press (see display).
Settings CallList
Language
Display Contrast
Option Unit
Hearing Level
Network
Exit
Contacts
F
CorpDirectory
E
Web
Select
The second option shows the IP address assigned to the
telephone.
Settings CallList
Contacts
Network
DHCP (YES)
IP Adress (xxx.xxx.xxx.xxx)
Subnet Mask (xxx.xxx.xxx.xxx)
Default Gateway (xxx.xxx.xxx.xxx)
Exit
F
CorpDirectory
Web
E
Write down the IP address.
Exit
Press to return to idle mode.
BusinessPhone – Ericsson Dialog 4425 IP Vision
113
Web Server
Access the Web Server
http://XXX.XXX.XXX.XXX
Enter the IP address in the address field of your web browser.
The web browser shows:
Note: If the access to the web server failed, please check
the proxy settings of your web browser and the address on
your phone display. If your phone has been unplugged from
the network for some days, the address might have been
changed.
Enter the web server password.
Default password: Welcome (Case sensitive!)
Note: If you had to enter a password when you logged on
to the phone, you must use this password instead (Dialog
4425 v. 2 phone). This password is then also the web server
password.
Change the web server password to your own personal password.
If you have forgotten your password, contact your system
administrator. See section “Settings” on page 119 (Dialog 4425 v. 1
phone).
114
BusinessPhone – Ericsson Dialog 4425 IP Vision
Web Server
Log on
Click.
On the left-hand side, a menu is displayed with the following
options:
•
Contacts (Dialog 4425 v. 2 only)
•
PhoneBook (Dialog 4425 v. 1 only)
•
Call List
•
Settings
•
Log off
BusinessPhone – Ericsson Dialog 4425 IP Vision
115
Web Server
Contacts
(Dialog 4425 v. 2 phone only).
Access the web server.
See chapter “Access the Web Server” on page 114.
Click on the Contacts folder in the menu on the left-hand
side.
If there are entries in Contacts, they will be listed in a table. Each
entry can be modified by clicking on the respective link in the first
column.
(Name)
Click.
Select one of the options below:
Save
Delete
Click to save the name and number in Contacts.
Click to delete the name and number from Contacts.
Or:
Call
Click to call the number.
Or:
Back
Click to return to the Contacts menu without making any
changes.
To delete all names and numbers from Contacts
Delete contacts
116
Click.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Web Server
PhoneBook
(Dialog 4425 v. 1 phone only).
Access the web server.
See chapter “Access the Web Server” on page 114.
Click on the PhoneBook folder in the menu on the left-hand
side.
If there are entries in the PhoneBook, they will be listed in a table.
Each entry can be modified by clicking on the respective link in the
first column.
(Name)
Click.
Select one of the options below:
Save
Delete
Click to save the name and number in the PhoneBook.
Click to delete the name and number from the PhoneBook.
Or:
Call
Click to call the number.
Or:
Back
Click to return to the PhoneBook menu without making any
changes.
To delete all names and numbers from PhoneBook
Delete phone book
Click.
BusinessPhone – Ericsson Dialog 4425 IP Vision
117
Web Server
Call List
Access the web server.
See chapter “Access the Web Server” on page 114.
Click on the Call List folder in the menu on the left-hand side.
If there are entries in the Call List, they will be listed in a table. Each
entry can be modified by clicking on the respective link in the first
column.
(Name)
Click.
Select one of the options below:
Delete
Click to delete the name and number from the Call List.
Or:
Call
Click to call the number.
Or:
Back
Click to return to the Call List menu without making any
changes.
Delete all Call List entries
Delete call list
118
Click.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Web Server
Settings
The Settings menu provides following options:
•
Change web server password
•
Programmable keys
•
Hearing level
Change web server password
Access the web server.
See chapter “Access the Web Server” on page 114.
Click on the Settings folder in the menu on the left-hand side.
The Settings sub-menu will be displayed.
*******
*******
Change password
Click.
Enter the new password.
The password needs to consist of a least 6 characters.
Move the cursor to the next field and enter the new password
again.
Note: The password is case sensitive!
Change
Log off
Click to confirm.
Click to exit.
Or:
Click any menu to continue.
BusinessPhone – Ericsson Dialog 4425 IP Vision
119
Web Server
Settings - Programmable Keys
Access the web server.
See chapter “Access the Web Server” on page 114.
Click on the Settings folder in the menu on the left-hand side.
The Settings sub-menu will be displayed.
Programmable Keys
Click.
The key layout of the telephone will be displayed in a table.
The Line 1 key and the Message waiting key are fixed, supervision
(MNS) keys can be programmed by the system administrator, all
others can be programmed with up to 24 digits each.
Click on the link of the desired key to modify its
programming.
(See figure above). The new dialog shows the current programming
and a text field for entering a new number.
Enter a new number
Enter the new number in the dedicated text field.
Save
120
Click to store the changes.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Web Server
Delete the current programming
Delete
Click to delete the current programming.
Exit the key programming dialog.
Back
Click to exit without making changes and to go back to the
key selection.
Settings - Hearing level
Access the web server.
See chapter “Access the Web Server” on page 114.
Click on the Settings folder in the menu on the left-hand side.
The Settings sub-menu will be displayed.
Hearing level
Change
Log off
Click.
The current level is shown in bold characters.
Click to change the level.
The new level is shown in blue characters.
Click to exit.
Or:
Click any menu to continue.
BusinessPhone – Ericsson Dialog 4425 IP Vision
121
Corporate Directory
Corporate Directory
Dialog 4425 v. 2 phone only.
In the Corporate Directory you can find a person´s phone number
and then make a call to that person. When you have accessed the
directory, you have the following available options:
Underlined
Options
E
F
Home
Å
Æ
Ç
Clickable link when marked (see display).
Menu for return options (see display).
Do Search = Search the directory, Refresh = Refresh the
content.
Move marker one step down (see display).
Move marker one step up (see display).
Return to the first page of the logged on menu (see display).
If pressed for at least two seconds, you return to idle mode.
Return to the previous menu.
Return to idle mode.
Not used.
Access the Corporate Directory and make a call
Note: This function must be activated by your system
administrator.
122
BusinessPhone – Ericsson Dialog 4425 IP Vision
Corporate Directory
Ç
Select CorpDirectory in the top menu (see display).
The displays shows:
Settings
CallList
Last Name
Contacts
CorpDirectory
An_
Web
Abc
First name
z
Do Search
DoSearch
E
Erease
Enter the first letters of the last name.
You can also search for first name, phone number and department.
Press (see display).
The display shows a list of names that begin with the entered
letters, e.g. An.
Found: 4
Home
1. Andersen Stina
2. Andersson Ann
E or F
Select
F
E
Select
The Home link is used if you want to do a new search.
Press (see display).
Repeat until requested person is marked.
Press (see display).
The display shows the directory data for the selected person.
Stina Andersen
Last Name: Andersen
First name: Stina
Phone: 2018
Department: DNDI
Mobile: 000703954818
E or F
Select
F
E
Select
Press (see display).
Repeat until the phone number (Phone:) is marked.
Press to make the call (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
123
Web
Web
Dialog 4425 v. 2 phone only.
Å
Æ
Ç
z
Underlined
Ç
In the Web menu you can access WAP pages (modified Internet
pages) via your phone. When you have accessed the WAP pages,
you have the following available options:
Return to the previous menu.
Return to idle mode.
Go to the next page.
Underlined text is a clickable link (see display).
Press a keypad key (0-9) for more than one second, to enter
the corresponding digit instead of the letter.
Access the Web menu
Select Web in the top menu (see display).
Settings CallList
Load Homepage
History
Enter Address
Resume
Exit
Contacts
F
CorpDirectory
E
Web
Select
Select one of the following options:
124
•
Load Homepage: Go to the home page (WAP portal).
Requires that the WAP portal has been defined.
•
History: History over visited WAP pages.
•
Enter Address: Enter an address to another WAP page.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Web
•
E or F
Select
Resume: Show the latest shown WAP page. This can for
instance be used if an incoming call has changed the display
and you want to go back to the WAP page again.
Enter other WAP pages
Press (see display).
Repeat until the Enter Address menu is framed.
Press (see display).
Settings
http://
CallList
Contacts
CorpDirectory
Web
abc
http://wap.tv4.se
z
http://wap.ericsson.com
Erease
OK
E OK
E
OK
Enter the WAP page address and press (see display).
The WAP page is shown. Use the display menu keys to navigate on
the page.
or
select a previously used WAP page and press (see display).
The WAP page is shown. Use the display menu keys to navigate on
the page.
BusinessPhone – Ericsson Dialog 4425 IP Vision
125
WAP Services
WAP Services
(Dialog 4425 v. 1 phone only).
Even if your phone is not a wireless device it is equipped with a
WAP (Wireless Application Protocol) browser, allowing you to
access both external WAP addresses (modified Internet pages) and
WAP addresses that are pre-defined in the phone (e.g. a central
directory).
Central directory
In the central directory you can find a persons phone number and
then make a call to that person. When you are logged on to the
central directory, you have the following available options:
Underlined
Options
E
F
Ret
Home
Å
Æ
Ç
126
Clickable link when marked (see display).
Menu for return options (see display).
Home = Logon menu and Exit = Return to top menu WAP
Services.
Move marker one step down (see display).
Move marker one step up (see display).
Return to the previous menu (see display).
Return to the first page of the logged on menu (see display).
If pressed for at least two seconds, you return to idle mode.
Return to the previous menu.
Short press: Return to the Logon menu.
Long press: Return to idle mode.
Not used.
BusinessPhone – Ericsson Dialog 4425 IP Vision
WAP Services
Access the central directory and make a call
Ç
Note: This function must be activated by your system
administrator.
Select WAP Services in the top menu (see display).
Settings CallList
Central Directory
Other WAP address
Home
F
Exit
WAP Services
PhoneBook
E
Select
Note: The Home option is only available, when a predefined WAP portal is accessible.
Select
Press to select the Central Directory menu (see display).
The displays shows:
Search
Last Name < >
First name < >
Phone
Dept < >
Search
Options
E or F
z
Select
E or F
Select
E
Press (see display).
Repeat until requested search criteria is marked, e.g. Last name.
Press (see display).
Enter the first letters of the last name.
Press to reach the link Search (see display).
Press (see display).
The display shows a list of names that begin with the entered
letters, e.g. AN.
Next
1. Andersen Stina
2. Andersson Ann
3. Andren Lars
4. Aner Hans
Options
BusinessPhone – Ericsson Dialog 4425 IP Vision
Found: 9
Main menu
E
Select
127
WAP Services
E or F
Select
If you want to see the next page with search result hits, you can
use the Next link. The Main menu link is used if you want to do a
new search.
Press (see display).
Repeat until requested person is marked.
Press (see display).
The display shows the directory data for the selected person.
Stina Andersen
Last Name Andersen
First name Stina
Phone 2018
Department DND
Mobile: 000703954818
Options
E or F
Select
128
E
Select
Press (see display).
Repeat until the phone number (Phone:) is marked.
Press to make the call (see display).
BusinessPhone – Ericsson Dialog 4425 IP Vision
WAP Services
Ç
Other WAP address
Select WAP Services in the top menu (see display).
Settings CallList
Central Directory
Other WAP address
Home
F
Exit
E or F
Select
z
WAP Services
PhoneBook
E
Select
Press (see display).
Repeat until the Other WAP Address menu is framed.
Press (see display).
The Enter address page is shown.
Enter the WAP address (excluding http://).
See example below.
Enter address
Address: WAP.TV4.SE
Exit
Erase
OK
Notes:
If a keypad key (0-9) is pressed for more than one second,
the corresponding digit is entered instead of the letter.
Press
OK
* to switch between upper and lower case.
Press (see display).
The top page for the entered address is shown. Use the display
menu keys for further steps on that page.
BusinessPhone – Ericsson Dialog 4425 IP Vision
129
WAP Services
To leave the WAP page
Options
E or F
Select
Press (see display).
Press (see display).
Repeat until the Exit menu is framed.
Press (see display).
You return to WAP Services in the top menu.
Note: You can always press Æ and keep it pressed for
at least one second to return to idle mode.
130
BusinessPhone – Ericsson Dialog 4425 IP Vision
Useful Hints
Useful Hints
Connections between external lines
With your BusinessPhone, you can establish an external call
diversion or a conference with more than one external party or
transfer an external call to another external destination (e.g.
a mobile phone). These features are very useful for everyday
business life.
Note: When these features are used, your BusinessPhone
will occupy at least two external lines.
However, there may be disadvantages in connecting to several
external lines. We would therefore like to draw your attention to the
following:
•
Please do not transfer external calls to an external
mailbox, to information systems or to external parties
before they have answered.
•
Try to avoid diverting calls to third parties before they
have answered.
•
If you are connected to two external lines, cancel one
call by pressing Line and 1.
If the external parties are not persons (mailbox, automated
information or attendant systems, etc.), connections on external
lines can last a long time, which can be costly. Moreover, such calls
may occupy two of your system’s external lines. You can restrict
connections between the external lines by re-programming your
system.
Please ask your system administrator or contact our service center
for more information.
BusinessPhone – Ericsson Dialog 4425 IP Vision
131
Installation
Installation
Configuration
When the Dialog 4425 IP Vision has been connected to a power
supply and to the IP network (LAN), the display will show:
Settings
CallList
Contacts
?
User administrator mode to change IP settings
(x)
(No change)
The (x) represents a timer counting down in seconds. This display
is for administrator mode only. Do not press a key during this time,
and No change is selected automatically.
Note: If you press a key accidentally, please contact your
system administrator.
Now the display shows:
Settings
CallList
Contacts
?
Connecting to DHCP server
The IP telephone is connecting to the DHCP server and gets its IP
address from the network.
Note: This menu is not displayed if you are using fixed IP
addresses.
After the IP address has been retrieved, the telephone checks
automatically if new software is available. See section “Software
updates” on page 133.
132
BusinessPhone – Ericsson Dialog 4425 IP Vision
Installation
Settings
CallList
Contacts
?
Getting configuration file...
In case of no available software updates, the display changes to:
Settings
CallList
Contacts
?
Loading software...
Now the software is loaded internally in the telephone. This takes
about 15 seconds, no further action is necessary. When the
software loading has been completed, the telephone will perform a
self test:
Settings
CallList
Contacts
?
Self test OK
Now the telephone is ready to use, and you have to log on to the
network. See section “Log On” on page 24.
Software updates
If a new software for your IP telephone is available, the following
display will appear after retrieving the IP address:
Settings
CallList
Contacts
A new version of the application software
?
is available on the server, update?
(Yes)
No
The x indicates a timer counting down seconds.
BusinessPhone – Ericsson Dialog 4425 IP Vision
133
Installation
(Yes)
Press to start the software update.
Note: If you do not press any key, (Yes) is selected
automatically.
Or:
No
Press to use the current software version.
The software update is cancelled and the normal start up
procedure will continue.
If you decided to update your telephone software, the following
display will appear:
Settings
CallList
Contacts
Getting new application software from the server
Please wait...
?
The software is loaded from the server. This will take about 30
seconds. When the software download is complete, the display
changes to:
Settings
CallList
Contacts
Saving new application...
DO NOT DISCONNECT THE TELEPHONE
?
It is important that you do not disconnect the telephone’s power
supply while this text is displayed. The saving of the new
application takes about 30 seconds. If a power failure occurs
during this phase, the telephone must load the software again.
Software version
í*4
#
134
You can check the software version of your telephone:
Press simultaneously for at least one second.
The program version is displayed for 5 seconds, and then all
available characters are displayed for a minute.
Press to return to idle mode.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Installation
Install cables
Handset cable to the left
Handset cable to the right
You can put the cable to the handset in the notch underneath the
telephone. The cable to the exchange has to be plugged in LINE
and the handset cable has to be plugged in HANDSET.
Note: The installation of the 24 V power adapter is optional.
If no external power supply has been installed, the
telephone will rely on the LAN power supply.
Change cables
To remove a cable, use a screwdriver to unlock the stop.
BusinessPhone – Ericsson Dialog 4425 IP Vision
135
Installation
Install stand and adjust telephone
Position high
Press to fasten stand
Position low
Release to remove stand
Tiltable display
Adjustable angle
136
BusinessPhone – Ericsson Dialog 4425 IP Vision
Installation
Install card
Use the Designation Card Manager to make and print your own
designation cards. The Designation Card Manager is included on
the Ericsson Telephone Toolbox CD or it can be downloaded from:
http://www.ericsson.com/enterprise/library/manuals.shtml
For questions regarding the product, please contact your Ericsson
Enterprise Certified Sales Partner.
Line
BusinessPhone – Ericsson Dialog 4425 IP Vision
137
Installation
Install key panels
1
Fasten the connector in the bottom of the hole using a
finger or a blunt tool. Make sure the connector fits before
pressing it down.
2
Press where the arrows are pointing, until you hear a
“Click” sound.
3
Install the stands as shown in the picture in section
“Stand positioning”.
Note: All key panels must be of type DBY 419 01.
138
BusinessPhone – Ericsson Dialog 4425 IP Vision
Installation
Stand positioning (1-4 key panels)
Install card
Use the Designation Card Manager to make and print your own key
panel designation cards. The Designation Card Manager is
included on the Ericsson Telephone Toolbox CD or it can be
downloaded from:
http://www.ericsson.com/enterprise/library/manuals.shtml
For questions regarding the product, please contact your Ericsson
Enterprise Certified Sales Partner.
BusinessPhone – Ericsson Dialog 4425 IP Vision
139
Installation
Install pullout leaf (optional)
140
1
Remove the protective film from the guiding rails.
2
Attach the guiding rails to the bottom of the phone,
observing the direction of the “cut” corner.
3
Insert the pullout leaf.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Installation
Wall mounting handset hook
The phone can be wall mounted without using a special console.
Useful for instance in conference rooms or public areas.
1
Use a screwdriver to remove the handset hook.
2
Turn the hook upside down and insert.
180 mm
81 mm
90 mm
3
Use a screwdriver to remove the two plastic covers.
4
Drill wall holes according to measure.
BusinessPhone – Ericsson Dialog 4425 IP Vision
141
Installation
Spacer, alternative 2
Spacer, alternative 1
(recommended)
A
B
max 15 mm
max 15 mm
A
min 10 mm
A
min 30 mm
min 30 mm
A
B
max 80 mm
max 60 mm
Lower wall distance screw
and spacer measures
Two upper wall distance screws
and spacer(s) measures
min 22 mm
B
5
142
6 mm
max 5,5 mm
9-10 mm
max 5,5 mm
3 mm
9-10 mm
A
min 22 mm
Mount screws according to measures and attach the
phone.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Installation
Placing the telephone
•
Do not place your telephone on sensitive surfaces. Use a nonslippery pad to protect your furniture from possible damage.
•
Do not place your telephone near sources of extreme heat, e.g.
near the radiator.
•
Make sure that the line cable isn’t creased.
Cleaning the telephone
Use a slightly moistened (not wet) soft cloth or an anti-static cloth
and wipe off the telephone carefully. Do not use rough cloth,
solvents or aggressive cleaning fluids. Any damages of the
telephone, that are caused by non-observance of these
instructions, are not part of the liability given by the manufacturer.
BusinessPhone – Ericsson Dialog 4425 IP Vision
143
Troubleshooting
Troubleshooting
This section contains information on how to solve common
operational problems. Go through the following steps if you
encounter any problems. If this does not solve the problem,
contact your system administrator. If others have similar
problems, there may be a system error.
Fault check list
1. Read the Installation chapter.
To make sure that you have done everything correctly and that
everything is properly connected.
2. Disconnect all extra equipment.
If your telephone is working properly when done, the problem
lies in the extra equipment.
3. Connect a functioning telephone instead of the faulty
one.
If that telephone is working properly, the problem is probably in
your telephone, contact your system administrator.
4. Check for operational problems.
If operational problems are found, the problem is in the
telephone network, contact the local telephone service or the
local telephone company.
íÉ #
144
5. Reboot the telephone.
Press and hold for at least one second.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Glossary
Glossary
Abbreviated Number Dialling
Initiating a call to a pre-programmed number
by dialling a code or pressing a key. There are
common short-numbers, which means that all
extensions can use them. See section
“Abbreviated Numbers” on page 34.
Direct Inward System Access (DISA)
If you are working externally, the DISA function
enables you to make external calls (long
distance) via the company PBX. You only pay
for the call to your company. See section
“Other Useful Features” on page 83.
Account Number
To place call costs on an Account Number.
See section “Other Useful Features” on
page 83.
Directory number
Numbers with 1 – 8 digits which are assigned
to extensions or external lines or as Common
Abbreviated Numbers.
Automated Attendant
A facility which sends voice instructions to
internal and external callers, providing all
options which can be chosen. Voice
instructions lead the caller to the desired
destination. See section “Other Useful
Features” on page 83.
Diversion
Incoming calls to an extension are diverted to
another directory number (extension, common
abbreviated number or the operator). There are
three possibilities:
Callback
An indication to a busy extension, to inform the
person that you want to speak to him/her.
See sections “Mailbox System” on page 59
and “Outgoing Calls” on page 30.
Camp-on
To place (queue) a call to a busy extension.
See section “Outgoing Calls” on page 30.
Dial-by-Name
Initiation of a call by operating a single key.
Internal numbers (or Common Abbreviated
Numbers) can be stored on each extension.
See section “Abbreviated Numbers” on
page 34.
BusinessPhone – Ericsson Dialog 4425 IP Vision
1. Direct, which means that all calls to an
extension are forwarded directly.
2. On no reply, which means that a call is
forwarded if it is not answered within a certain
time.
3. On busy, which means that a call is
forwarded if the extension is busy.
See section “Call Forwarding” on page 48.
Diversion Bypass
This is useful for letting urgent calls through to
an extension where diversion is active.
See section “Call Forwarding” on page 48.
Extension
All telephones connected to the PBX have a
unique internal number (up to 3 digits).
145
Glossary
Information
Internal callers are informed about absence
and time of return. External callers are diverted
to the operator, where the same information is
available. Information can be of two kinds:
1. Pre-programmed text information.
2. Voice information.
Intrusion
To intrude on an ongoing call when a requested
extension is busy. See section “Outgoing Calls”
on page 30.
Least Cost Routing
A function that automatically selects the
cheapest way to connect your external call
(not necessarily the shortest distance).
Mailbox
The mailbox system controls the messages
that are left for or sent by you when you are
absent. See section “Mailbox System” on
page 59.
Message
A message can be sent to any extension. This
is useful when you receive the busy tone or get
no answer. There are two kinds of message:
1.Call Me message.
2. Voice message.
See section “Send Message” on page 47.
Mute
To switch the microphone temporarily off.
See section “During Calls” on page 42.
146
Password (System)
A four-digit code needed to e.g. block your
extension and retrieve messages from the
mailbox system. You can set your own
Password. See section “Change Password” on
page 67.
PBX
Private Branch Exchange. Your telephone
switching system (e.g. BusinessPhone 250).
Pre-defined text
Pre-programmed absent information.
See section “Absence Information” on
page 55.
Third party
A third connection (person), which can
be included in an ongoing two person
conversation. The connection can be
internal or external.
See section “During Calls” on page 42.
Tie line
An external line from the private network.
Transfer
During an internal or external ongoing call you
can make an inquiry and then transfer the call
to another party (internal or external).
See section “During Calls” on page 42 and
“Useful Hints” on page 131.
Trunk line
A trunk line is the same as an external line. Can
be either digital or analog.
BusinessPhone – Ericsson Dialog 4425 IP Vision
Index
Index
A
Abbreviated Numbers 34
Absence Information 55
Change information 58
Enter information 56
Access the mailbox 61
Accessories 106
Key panel 106
Pull-out leaf 109
Account Number 88
Activate the Mailbox 59
Add Microsoft Outlook contacts 110
Alternative programming for Automatic
Callback, Camp-on, Intrusion 105
Answer a second call 29
Answer calls 28
Automatic Callback 32
B
Busy extension 32
C
Call Forwarding 48
Diversion when there is no answer 48
Diversion when your extension is busy 48
Fixed Diversion 49
Follow-me 53
Individual Diversion 49
Call List 37
Access via the web server 118
Missed/Rejected calls 39
Redial 37
Call Waiting 45
Camp-on 32
Change information 58
Change Password
via the telephone 67
via your mailbox 67
Change your Personal Greeting 64
BusinessPhone – Ericsson Dialog 4425 IP Vision
Cleaning the telephone 143
Common Abbreviated Numbers 34
Common Hold 46
Conference 45
Contacts 69
Corporate Directory 122
D
Deactivate the Mailbox 60
Description
Display info 12
Ericsson Dialog 4425 IP Vision 8
Lamp indications 11
Menu Structure 15
Menu structure Dialog 4425 v. 1 phone 16
Menu structure Dialog 4425 v. 2 phone 17
Tones 18
Dial-by-Name 34, 35
Dialog 4425 IP Vision 8
Dictaphone function 68
Direct Inward System Access (DISA) 87
Display backlight 100
Display contrast 99
Display info 12
Diversion when there is no answer 48
Diversion when your extension is busy 48
Diverted Extension 33
Doorphone 86
DTMF Tones 88
During Calls 42
Call Waiting 45
Common Hold 46
Conference 45
From handset to handsfree 42
From handsfree to handset 42
Individual Hold 46
Inquiry 43
Mute 43
Transfer 44
147
Index
E
Erase information 58
F
Fault check list 144
Fixed Diversion 49
Follow-me 53
Forward a Voice Message 63
From handset to handsfree 42
From handsfree to handset 42
G
Glossary 145
Group Call-pick-up 80
Group Features 78
Group Call- pick-up 80
Group Hunting 80
Key system 78
Supervision/Telephone Attendance 79
Group Hunting 80
H
Handset and loudspeaker volume 102
I
Important user information 6
Incoming Calls 28
Answer calls 28
Deflect the call 29
Handsfree 28
Individual Abbreviated Numbers 35
Individual Diversion 49
Individual Hold 46
Inquiry 43
Install cables 135
Installation 132
Adjust telephone 136
Cables 135
Card 137
Cleaning the telephone 143
Placing the telephone 143
Pullout leaf 140
Stand 136
Wall mounting handset hook 141
Installation Dialog 4223
Key panels 138
Intrusion 33
148
K
Key panel 106
Key system 78
L
Lamp indications 11
LAN access control (network authentication) 21
Language 98
Last External Number Redial 31
LCR 89
Least Cost Routing 89
Listen to your Messages 62
Log off 27
Log on 24
M
Mailbox System 59
Access the mailbox 61
Activate the Mailbox 59
Change Password 67
Change your Personal Greeting 64
Deactivate the Mailbox 60
Dictaphone function 68
Forward a Voice Message 63
Listen to your Messages 62
Outcall (External) Notification 65
Send Messages via your mailbox 65
Make a call via the System Phonebook 77
Make calls 30
Menu Structure 15
Menu structure Dialog 4425 v. 1 phone 16
Menu structure Dialog 4425 v. 2 phone 17
Missed/Rejected calls 39
Mute 43
Mute ring signal 103
My Dialog 4000 Contacts 110
N
Network Settings 104
O
Option unit 101
Other Useful Features 83
Account Number 88
Direct Inward System Access (DISA) 87
Doorphone 86
DTMF Tones 88
Least Cost Routing 89
Reminder 85
Tandem configuration 83
BusinessPhone – Ericsson Dialog 4425 IP Vision
Index
Outcall (External) Notification 65
Outgoing Calls 30
Abbreviated Numbers 34
Automatic Callback 32
Busy extension 32
Common Abbreviated Numbers 34
Dial-by-Name 34, 35
Diverted Extension 33
Handsfree 31
Individual Abbreviated Numbers 35
Last External Number Redial 31
Make calls 30
P
Phone book 69
Placing the telephone 143
Programmable keys
Configure via the web server 120
Pull-out leaf 109
R
Redial from Call List 37
Reminder 85
Reset the phone 19
Ring signal volume 103
Ringing signal character 95
S
Safety Instructions 6
Save information 58
Send Message
during calls 47
Send Messages
via the mailbox 65
Settings 92
Backlight 100
Display contrast 99
Handset and loudspeaker volume 102
Language 98
Mute ring signal 103
Network Settings 104
Option unit 101
Ring signal volume 103
Ringing signal character 95
BusinessPhone – Ericsson Dialog 4425 IP Vision
Silent ringing 103
Time and Date 96
Silent ringing 103
SOS call function 24
Start the phone 20
LAN access control (network
authentication) 21
Log off 27
Log on 24
Update software 23
Supervision/Telephone Attendance 79
System Phonebook 76
Make a Call 77
Use 76
T
Tandem configuration 83
Temperature indication 25
Time and Date 96
Tones 18
Transfer 44
Troubleshooting 144
Fault check list 144
U
Update software 23
Use the system Phonebook 76
Useful Hints 131
V
Volume 102
W
WAP services 126
Web 124
Web server 112
Access the web server 114
Call List 118
Change password 119
Programmable keys 120
Read out the IP-address 113
Welcome 4
Write Text 90
149
150
BusinessPhone – Ericsson Dialog 4425 IP Vision
BusinessPhone – Ericsson Dialog 4425 IP Vision
151
All rights reserved.
Ericsson Enterprise AB
For questions regarding the product,
please contact your Ericsson Enterprise Certified Sales Partner.
Also visit us on www.ericsson.com/enterprise
© Ericsson Enterprise AB 2006
EN/LZTBS 180 345 R2A
Printed on chlorine free paper.
Ericsson is shaping the future of Mobile and Broadband Internet communications through its
continuous technology leadership. Providing innovative solutions in more than 140 countries,
Ericsson is helping to create the most powerful communication companies in the world.
Download PDF

advertising