Eureka 59 Vacuum Cleaner User Manual

Home Cleaning System
Vacuum Cleaner
Household Type
Owner’s Guide
6900 Series
Index
Important Safeguards ........... 2
Service Information ............... 4
Automatic Motor Shut-Off ..... 4
Assembly & Use ................. 5-7
Accessories ........................... 8
Dust Bag ............................... 9
Filters .................................. 10
Brush Roll ........................... 11
Brush Roll Belt ............... 11-12
Light Bulb ....................... 11-12
Customer Order Form .... 13-14
Warranty .............................. 15
www.eureka.com
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
To reduce the risk of fire, electric shock, or injury:
• Do not use outdoors or on wet surfaces.
• Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and
before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service center before using.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do
not run vacuum cleaner over cord. Keep cord away from heated surfaces.
• Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Always turn off this appliance before connecting or disconnecting either hose or motorized nozzle.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• The hose contains electrical wires. Do not use if damaged, cut or punctured. Avoid picking up sharp objects.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that
may reduce airflow.
• This vacuum cleaner creates suction and contains a revolving brush roll. Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bag in place.
• Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive
belt.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.
• Store your cleaner in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
2
SAVE THESE INSTRUCTIONS
CONSEILS DE SÉCURITÉ
Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes:
LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE ASPIRATEUR.
AVERTISSEMENT
Pour réduire le risque de feu, de choc électrique, ou de blessure:
• Ne pas utiliser à l’extérieur ou sur des surfaces mouillées.
• Fermez le commutateur et débranchez l’appareil lorsque vous ne l’utilisez pas ou avant le nettoyage ou l’entretien.
• Ne permettez pas qu’il soit utilisé comme jouet. Une attention particulière est nécessaire lorsque utilisé par ou prés d’un
enfant.
• Suivez les recommandations d’utilisation de ce manuel. Utilisez uniquement les accessoires recommandés par le fabriquant.
• Ne pas utiliser si le cordon ou la fiche sont endommagés. Si l’aspirateur ne fonctionne pas comme il le devrait, s’il a été
échappe, s’il est endommagé, s’il a été laissé à l’extérieur ou échappe dans l’eau, retournez-le à un centre de service
avant d’utiliser.
• Ne pas le tirer ou le transporter par le cordon, ne pas utiliser le cordon un guise de poignée. Ne pas fermer une porte sur
le cordon ou tirer le cordon sur des coins ou bordures pointus. Ne pas circuler sur le cordon avec l’aspirateur. Tenir le
cordon à distance des surfaces chauffantes.
• Tenir la fiche lorsque vous rebobinez le cordon électrique. Ne pas permettre que la fiche batte l’air.
• Ne pas utiliser des rallonges ou des prises qui n’ont pas de capacité suffisante pour transporte le courant.
• Éteindre toujours l’appareil avant de connecter ou de déconnecter le tuyau ou la lance motorisée.
• Fermer tous les contrôles avant de débrancher.
• Le tuyau contient des fils électriques et ne doit pas être utilisé s’il est abîmé, coupé ou percé. Éviter de ramasser les
objets aigus.
• Ne pas débrancher en tirant sur le cordon. Pour débrancher, tenez la fiche et non le cordon.
• Ne pas manipuler la fiche ou l’aspirateur avec les mains mouillées.
• Ne pas rien insérer dans les ouvertures. Ne pas utiliser si des ouvertures sont bloquées; assurez-vous qu’elles soient
dégagées de poussière, mousse, cheveux ou toute autre chose qui pourrait réduire le passage de l’air.
• Cet aspirateur crée de la succion et contient un rouleau-brosse tournant. Tenir les parties mobiles et les ouvertures loin
des cheveux, du linge, des doigts et de toute partie du corps.
• Ne pas ramasser des objets qui brûlent ou fument comme les cigarettes, allumettes ou cendres chaudes.
• N’utilisez pas sans le sac de poussière en place.
• Les poulies du courroie peuvent devenir chaudes pendant l’utilisation normale. Pour prévenir des brûlures, évitez de
touché la poulie du courroie lorsque vous réparez la courroie.
• Portez une attention particulière lorsque vous nettoyez les escaliers.
• Ne pas utiliser pour ramasser des liquides inflammables ou combustibles comme de l’essence. Ne pas utiliser dans les
endroits où ces liquides pourraient être présents.
• Entreposez votre aspirateur à l’intérieur dans un endroit propre et sec.
• Maintenez un bon éclairage à l’endroit où vous travaillez.
• Débrancher les appareils électrique avant de les balayer.
CONSERVEZ CES INSTRUCTIONS
3
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). The plug will
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
Afin de réduire le risque de choc électrique, cet appareil est muni d’une fiche polarisée (une des lames est plus large).
Cette fiche ne peut étre insérée dans une prise polarisée que d’une seule façon. Si la fiche ne peut étre insérée dans la prise,
retourner la fiche. Si la fiche ne peut toujours pas étre inséree dans la prise, faire installer une prise adéquate par un
électricien qualifié. Ne pas modifier la fiche.
GENERAL INFORMATION
The bag may have come dislodged in shipping. Check the bag to insure proper seating before attempting to use the
cleaner. Do not operate the cleaner without a dust bag or the filters. Damage may result to the motor (see Dust Bag and
Filter).
The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or sharp objects with the cleaner to avoid
bag breakage, hose clogging, or possible motor damage.
Service Information
The instructions in this booklet serve as a guide to routine maintenance. If additional service is required, telephone toll free:
USA: 1-800-282-2886
Mexico: 5670-6169
Canada: 1-800-282-2886
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701,
USA. In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Eureka Limited
Warranty for complete service information.
DO NOT OIL the motors (in the canister and the motorized nozzle) or the brush roll at any time. The bearings
are permanently lubricated and sealed.
Rating Plate
The model, type and serial numbers are indicated on the rating
plate located on the underneath side of the cleaner. For prompt
and complete service information, always refer to these numbers
when inquiring about service.
MADE IN
SWEDEN
MODEL
HOUSEHOLD TYPE
THE EUREKA COMPANY
BLOOMINGTON, IL 61701
SERVICE INFORMATION: 1-800-282-2886
TYPE
TYPE MENAGER
LISTED
Model No. & Type______________________________
®
Serial No._____________________________________
UL
SERIAL NO.
C
UL
120 V AMPS
60 HZ 12.0
945G
Automatic Motor Shut-Off
To protect from overheating, this vacuum cleaner is equipped with a thermostat which automatically shuts off the motor if it
overheats. Should this happen:
1. Turn off the switch and unplug the cleaner because the thermostat will allow the cleaner to automatically start running
again when the motor cools (approximately 30 minutes);
2. Check the hose, bag, and filters as a clogged hose, full bag, or dirty filters could cause the motor to overheat; and
3. Call a Eureka Service Station if the cleaner will not operate after cooling for approximately 30 minutes.
4
ASSEMBLY ITEMS
NOTE: Unpack and identify all parts. Fully assemble before using.
1
14
3
4
11b
7
2
15
5
6
11c
12
17
11a
8a
8
Wand Style
Varies by Model
13
10
8b
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
8c
9
16
Pow
Power Switch
Var erhea
ies
d
Cordaway Cord Reel
by Style
Mo
Variable Speed Control (on some models)
del
Bag Change Indicator
Bag Cover Latch
HEPA Filter
Tool-Pak Cover Latch
Tool-Pak Storage
a) Dusting Brush
b) Crevice Tool
c) Upholstery Nozzle
Floor Brush
Disposable Dust Bags
Hose has Power-Touch Handle with remote controls (11a) and coupling (11b) with plug (11c).
See instructions on pages 6 and 7.
Hose Plug Connection
Canister Handle
Button-Lock Extension Wand with plug retainer
Button-Lock Extension Wand with cord retainer
Motorized Nozzle
Parking slot for bare floor nozzle. There is an additional parking slot located on the bottom of the canister.
Always carry the vacuum by the handle when cleaning steps, etc.
5
How to Assemble and Use
9
Select bare floor or
carpet cleaning
k
ON
Remote ON/OFF Selector for bare floor or carpet
*Off – push down on front
Bare Floor – push down on back
OF
F
POWER-TOUCH® Handle
*Power ON/OFF can be controlled on some models from the
POWER-TOUCH handle switch or canister ON/OFF switch.
Other models can only use the canister switch.
Power-Touch
Hose Handle
k
Vacuum Control
Cleaning suction is reduced by
pushing lever to LOW position.
Place lever at HIGH position to
increase suction for carpet
cleaning.
Available on models without
Remote Speed Control.
4
3
Detail A
1. Snap interlocking wands together.
2. Push assembled wands into power nozzle.
3. Push motorized nozzle plug into the retainer located at the
top of the upper wand; secure cord in slot (Detail A).
4. Place Power-Touch hose handle into wands until plug
connects and button locks.
1
5. Insert hose coupling into top of canister and push hose
power cord into receptacle located near the canister handle.
6. Pull on electrical cord and push plug into outlet. To rewind,
step on Cordaway cord reel button, hold and guide plug
while it rewinds.
7. Step on motorized nozzle to release handle; pull back to
comfortable work position.
8. Push On/Off canister switch.
(A thermostat automatically shuts off the motor if it
overheats, see Automatic Motor Shut-Off,)
9. Bare floor or carpet cleaning selection on remote control,
only.
NOTE: Optional remote controls on the hose handle
operate only if the canister switch is on.
7
2
k
Handle Release
8
s
5
6
6
How to Assemble and Use
9
POWER-TOUCH® Handle
Ba
k
Ca
rpe
t
Off
re
Flo
or
Remote ON/OFF Selector for bare floor or carpet
Carpet – push down on front
*Off – middle
Bare Floor – push down on back
Select bare floor or
carpet cleaning
n
*Power ON/OFF can be controlled on some models from the
POWER-TOUCH handle switch or canister ON/OFF switch.
Other models can only use the canister switch.
Power-Touch
Hose Handle
k
Remote Speed Control (optional)
Regardless of the speed of the canister motor, slide to reduce or
increase power as needed.
3
Vacuum Control
n
Cleaning suction is reduced by pushing lever
to LOW position. Place lever at HIGH
position to increase suction for carpet
cleaning.
Available on models without Remote
Speed Control.
1. Push interlocking wands together.
2. Push assembled wands into power nozzle.
3. Place Power-Touch hose handle into wands until plug connects
and button locks.
1
4. Insert hose coupling into top of canister.
5. Push hose power cord into receptacle located near the canister
handle.
6. Pull on electrical cord and push plug into outlet. To rewind,
step on Cordaway cord reel button, hold and guide plug while
it rewinds.
7. Step on motorized nozzle to release handle; pull back to
comfortable work position.
8. Push On/Off canister switch.
(A thermostat automatically shuts off the motor if it overheats,
see Automatic Motor Shut-Off,)
2
9. Bare floor or carpet cleaning selection on remote control, only.
10. Variable Speed Control on the canister slides to increase or
decrease power as needed.
NOTE: Optional remote controls on the hose handle operate
only if the canister switch is on.
Handle
Release
10
8
s
4
7
6
5
7
Tools
11. Lift the tool storage lid to open. The tools store under the cover. To use cleaning tools, attach them directly to end of
hose or use the button-lock wand. Twist the round end of tool onto hose or wand until secure.
a. Dusting brush. For furniture, blinds, books, lamp shades, shelves.
b. Crevice tool. For corners, baseboards, between cushions, sliding door tracks.
c. Upholstery nozzle. For curtains, draperies, cushions, fabrics.
d. Floor brush. (On some models.) For paneled walls, ceilings, beams, bare floor surfaces.
11
a
b
c
a
b
d
c
8
HOW TO MAINTAIN
The paper bag and filters play a very important role in the efficiency of the vacuum cleaner. The purpose of the paper bag is
to trap dirt and at the same time the paper must be porous enough to allow air to pass through. If the paper bag or filters
become clogged, no air can pass through the cleaner and no cleaning takes place regardless of how powerful the unit. To
keep the cleaner operating at maximum efficiency, change the dust bag frequently and clean the filters as necessary.
Some fine particles can restrict airflow very quickly and will decrease performance even before the bag appears to be full.
When vacuuming carpet fresheners or cleaners, plaster dust, or similar fine substances, clean the bag and filters more often.
Bag Change Indicator
The bag change indicator bar fills as the airflow through the bag decreases.
Certain types of fine particles like powder, plaster dust, or carpet fibers can
restrict airflow very quickly and will decrease performance even before the
bag appears to be full. When the warning appears, change the disposable
dust bag to restore maximum performance. If a clean dust bag does not
restore maximum performance, clean the filters and check the hose and
wands for obstructions.
Empty Bar
Filled Bar
HOW TO CHANGE DISPOSABLE DUST BAG
NOTE: Turn off the power switch and disconnect
electrical cord from wall socket before
changing dust bag. Never use the cleaner
without a dust bag or filters.
1
To remove used dust bag:
1. Unplug the hose plug to open the lid of bag
compartment.
2. Push the bag’s cardboard disc closed, grasp
the cardboard collar and lift out the full bag.
3
2
©
To install new dust bag:
3. Put in the new dust bag (part number 60284)
by slotting the cardboard collar into the
channel holder. The lid cannot be closed over
a bag that is not fitted into place.
9
Filters
For maximum efficiency, be sure to maintain the motor filter and the final filter regularly.
Motor Filter
Inspect the motor filter with each disposable dust bag
change.
The motor filter in the bag compartment should be cleaned
when necessary or about twice a year.
•
Open the cover and lift up on the filter.
•
Shake out thoroughly.
HEPA Filter/Micron Filter
Check the HEPA/Micron filter with each disposable dust bag change. Replace after every six bag changes or when obviously
dirty.
1. To change HEPA/Micron filter, press exhaust grille to open the filter cover.
2. Remove filter cover by lifting up.
3. Pull out the used HEPA/Micron filter by using finger tab.
4. Put in new HEPA/Micron filter.
5. Replace filter cover.
2
1
10
3
Brush Roll
The brush roll turns to sweep and comb the carpet nap. Keep the brush roll free from hair and threads so it will continue
cleaning. When the bristles of the brush roll no longer touch a piece of cardboard held across the bottom plate, the brush roll
is ineffective because the bristles no longer touch the carpet nap. To maintain the most effective cleaning, install a new brush
roll.
Brush Roll Belt and Light Bulb
The brush roll belt on the motorized nozzle drives the brush roll to agitate, sweep, and comb the carpet nap. The belt should
be checked regularly to be sure that it is in good condition. Replace the belt if it is stretching, cracking, or slipping. Cut away
any hair or thread wound around the brush roll or belt pulley because the buildup could cause the belt to rotate unevenly.
How to Replace Worn Belt or Light Bulb (On Some Models)
Continue to step 2 to change belt. Skip to step 7 to
replace hood.
{
Replace light bulb, if necessary. Use GENUINE
EUREKA replacement bulb, 59045.
{
1. Remove four screws from bottom side. Turn unit over;
pull up on hood to remove.
{
{
NOTE: Turn off the switch and unplug the electrical cord before replacing belt or bulb. Pulleys can become hot
during normal use. To prevent injury, avoid touching the pulleys when servicing the drive belt.
Motor Pulley
2. Lift out brush roll and discard used belt.
{
3. Put new belt around brush roll pulley first; then the
motor pulley.
4. Place left end cap into the base.
5. Pull right end of brush roll to stretch belt. Secure right
end cap into base.
6. Rotate brush roll to seat belt.
{
7. Position hood; secure with screws.
Brush Roll Pulley
Use GENUINE EUREKA replacement belt, 58065.
11
How to Replace Worn Belt or Light Bulb (On Some Models)
CAUTION:
Disconnect power cord and wands from electrical hose before replacing belt or bulb. Belt pulleys can
become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive
belt.
To replace the light bulb,
remove the screws marked
A,B,C,D.
To replace the belt, remove
the screws marked 1,2,3,4.
How to Replace Light Bulb
1. Flip power head over onto its top.
2. Remove the four screws marked by letters in the
illustration above.
3. Flip power head back over.
4. Lift cover up to find light bulb inside.
5. Grasp light bulb and pull out of socket.
6. Push new light bulb into socket.
7. Reinstall cover on base and replace the four screws.
Use GENUINE EUREKA replacement bulb, 61682.
How to Replace Worn Belt
1.
2.
3.
4.
5.
6.
7.
6.
Flip power head over onto its top.
Remove the four screws marked by numbers in the illustration above.
Lift base plate up to find belt and brush roll inside.
Lift out brush roll and remove old belt.
Place new belt around brush roll pulley.
Place other end of belt around brush roll.
Replace brush roll into base.
Reinstall cover on base and replace the four screws.
5
Use GENUINE EUREKA replacement belt, 58065.
12
6
4
7
THE EUREKA LIMITED WARRANTY
What This Warranty Covers
Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year. The warranty is granted only to the
original purchaser and members of his or her immediate household. The warranty is subject to the following provisions.
What This Warranty Does Not Cover
• Parts of the cleaner that require replacement under normal use, such as disposable dust bags, filters, drive belts, light bulbs, and brush roll bristles
• Damages or malfunctions caused by negligence, abuse, or use not in accordance with the Owner’s Guide.
• Defects or damages caused by unauthorized service or the use of other than Genuine Eureka parts.
What The Eureka Company Will Do
The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty. As a matter of warranty policy, the Eureka Company
will not refund the consumer’s purchase price.
Warranty Registration
Please fill out and return the warranty registration card accompanying your cleaner.
Obtaining Warranty Service
To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Eureka Authorized Warranty Station.
You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station is “Eureka Authorized.”
For the location of the nearest Eureka Authorized Warranty Station or for service information, telephone toll free:
USA: 1-800-282-2886
Mexico: 5670-6169
Canada: 1-800-282-2886
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company, 866
Langs Drive, Cambridge, Ontario N3H 2N7.
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the Eureka Authorized Warranty Station.
Return shipping charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type, and serial number from the data plate on the cleaner.
Further Limitations and Exclusions
Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any warranty for Fitness For A Particular
Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall Eureka be liable for any consequential or incidental damages you
may incur in connection with your purchase or use of the cleaner. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary by state.
GENUINE
EUREKA PRODUCT
Questions & Answers about Genuine Eureka Products
Q: Why should I use only Genuine Eureka paper bags, belts, and parts in my Eureka vacuum cleaner?
A: Using Genuine Eureka Products, which are made to our exacting specifications and engineered with emphasis on quality, performance, and customer satisfaction,
ensures the long life and cleaning efficiency of your vacuum cleaner. Overall, this saves you money and helps to keep your home clean.
Q: How can I be sure I am using only genuine Eureka products in my vacuum cleaner?
A: Typically, packaged products and paper bags can be identified by a “Genuine Eureka Product” symbol (see illustration above). For further identification assistance,
you may call our toll-free number, 1-800-282-2886, for the location of a nearby Eureka Authorized Warranty Station.
Q: Are there any differences between “made to fit” or “imitation” and Genuine Eureka paper bags, belts, and parts?
A: Yes, there are some very important differences in materials, quality, and reliability. Many customers have mistakenly purchased “imitation” paper bags and parts
while thinking they purchased genuine. Unfortunately, many of these customers discovered the differences after they experienced related difficulties.
For Genuine Eureka Value, Accept No Imitations!
THE EUREKA COMPANY
Bloomington, Illinois 61701
Household Warranty
abs 190
15
Part No. 71428 (6/01)
©2001 White Consolidated Industries, Inc.
Printed in U.S.A.
Ristenbatt Vacuum Cleaner Service, Inc.
TWO YEAR LIMITED WARRANTY
What This Warranty Covers
The Vacuum Cleaner described below in the Proof of Purchase is warranted to be free from all
defects in material and workmanship in normal household use for a period of two years from the
original date of purchase. The warranty is granted only to the original purchaser and members of his
or her immediate household. The warranty is subject to the following provisions.
What This Warranty Does Not Cover
! Parts of the cleaner that require replacement under normal use, such as disposable dust bags,
filters, drive belts, light bulbs, and brush roll bristles.
! Damages or malfunctions caused by negligence, abuse, accident, mishandling, misapplication,
alteration, modification or use not in accordance with the Owner's Guide.
! Defects or damages caused by service other than by Ristenbatt Vacuum Cleaner Service, Inc. or the
use of other than the Original Manufacturer's parts, bags and filters.
! Damage that is attributable to acts of God.
! The cost of returning the vacuum cleaner or part to Ristenbatt Vacuum Cleaner Service for repair
or replacement.
What Ristenbatt Vacuum Cleaner Service, Inc. Will Do
Ristenbatt Vacuum Cleaner Service, Inc. will, at its option, repair or replace, free of charge, a defective
cleaner or cleaner part that is covered by this warranty. The cost of labor to repair or replace parts
covered by this warranty is also covered by this warranty. As a matter of warranty policy, Ristenbatt
Vacuum Cleaner Service, Inc. will not refund the consumer's purchase price.
Obtaining Warranty Service
To obtain warranty service you must return the defective cleaner or cleaner part along with proof of
purchase to a Ristenbatt Vacuum Cleaner Service, Inc. service center. To locate their nearest service
center, call 800-413-2778 or 717-665-5126. If you prefer, you can write to Ristenbatt Vacuum
Cleaner Service, Inc., 1038 Lancaster Road, Manheim, PA 17545-9747.
Further Limitations and Exclusions
Any warranty that may be expressed or implied in connection with your purchase or use of the
cleaner, including any warranty of Merchantability or any warranty for Fitness For A Particular
Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event
shall Ristenbatt Vacuum Cleaner Service, Inc. be liable for any consequential or incidental damages
you may incur in connection with your purchase or use of the cleaner or arising out of any breach of
this warranty. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary by state.
Proof of Purchase
The following is the Proof of Purchase for the vacuum cleaner which was purchased from Ristenbatt
Vacuum Cleaner Service, Inc. This warranty must be signed by a Ristenbatt salesperson to be valid.
Purchase Date __________ Model __________ Serial # ________________ Salesperson ____________________