Operating instructions | Exmark TTS20KAE483 Lawn Mower User Manual

JE1907
JE1907DC
CH
CH
VOL
VOL
MENU
INPUT
LCD Color TV
with ATSC Tuner
Operating Manual
Before connecting, operating or adjusting this product, please read the manual completely. Please
keep this manual for future reference.
The illustrations and on-screen displays in this operation manual are for explanation purposes and may
vary slightly from the actual operations.
Menu items that are not selectable are grayed out.
FOR ASSISTANCE, VISIT US AT WWW.ASAELECTRONICS.COM.
Important Information
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire or electric shock, do not expose 1)
this apparatus to rain or moisture.
2)
3)
4)
CAUTION
5)
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION-To reduce the risk of electric shock, do not
perform any servicing other than that
contained in the operating instructions unless
you are qualified to do so.
6)
7)
This symbol is intended to alert the user to the 8)
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
9)
This product utilizes tin-lead solder, and fluorescent lamp
containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic 10)
Industries Alliance: www.eia.org
FCC STATEMENT
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
11)
12)
13)
14)
FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any
changes or modifications to this monitor not expressly
approved by the manufacturer could cause harmful
interference and would void the user's authority to
operate this device.
WARNING:
This is a CLASS B product. In a domestic
environment, this product may cause radio
interference, in which case the user may be
required to take adequate measures to counter
interference.
15)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Apparatus should not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, should be placed on the apparatus.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer or sold with
the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning
storms or when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Where the mains plug or an appliance coupler is
used as the disconnect device, the disconnect
device shall remain readily operable.
1
Important Safeguards
= Stubborn stains may be removed with a cloth slightly
dampened with a solution of mild soap and warm water.
Never use strong solvents such as thinner or benzine for
cleaning.
= If using a chemically pre-treated cloth, please follow the
instructions provided on the package.
Before using your TV, please read these instructions
completely, and keep this manual for future reference.
Carefully observe and comply with all warnings,
cautions and instructions placed on the unit or
described in the operating instructions or service
manual.
WARNING
Overloading
To guard against injury, the following basic safety precautions
should be observed in the installation, use and servicing of the
unit.
Do not overload wall outlets, extension cords or convenience
receptacles beyond their capacity, since this can result in fire
or electric shock.
Power Sources
Power
This unit should be operated only from the type of power
source indicated on the information label.
If you are not sure of the type of electrical power supplied to
your home, consult your dealer or local power company.
Grounding or Polarization
This unit is equipped with a polarized AC power cord plug (a
plug having one blade wider than the other), or a DC power
connection, for use in a vehicle. Follow the instructions
below:
For the unit with a polarized AC power cord plug
This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing
the plug. If the plug still fails to fit, contact your electrician to
have a suitable outlet installed. Do not defeat the safety
purpose of the polarized plug by forcing it in.
For the unit with a DC power connector
For installation in a vehicle, connect the red wire to the 12V
accessory line and the black wire to a ground terminal.
Wall outlet
Do not use a poor fitting outlet.
Insert the plug fully into the outlet. If it is loose, it may cause
arcing and result in fire. Contact your electrician to have the
outlet changed.
Wiring
For your safety, unplug the power cord when wiring cables.
Electric shock
Do not touch the AC power cord or the unit with a wet hand. If
you plug/unplug the AC power cord from the unit with a wet
hand, it may cause electric shock.
Never attempt to move the unit unless the AC power cord is
disconnected.
Cleaning
= Clean the power plug regularly.
= If the plug is covered with dust and it picks
up moisture, its insulation may deteriorate
and result in fire. Unplug the power plug
and clean it regularly.
= Unplug the power cord when cleaning this unit. If not, it may
result in electric shock.
= Clean the cabinet of the TV with a dry soft cloth. To remove
dust from the screen, wipe it gently with a soft cloth.
2
Always turn the unit off when it is not being used.
When the unit is left unattended and unused for long periods
of time, unplug it from the wall outlet as a precaution against
the possibility of an internal malfunction that could create a fire
hazard.
Sound
If a snapping or popping sound from the TV is continuous or
frequent while the TV is operating, unplug the TV and consult
your dealer or service technician. It is normal for TV’s to make
occasional snapping or popping sounds, particularly when
being turned on or off.
Power Cord
If you damage the power cord, it may result in fire or electric
shock.
= Do not pinch, bend, or twist the cord excessively. The core
lines may be bared and cut and cause short-circuit,
resulting in fire or electric shock.
= Do not convert or damage the power cord.
= Do not put anything heavy on the power cord. Do not pull
the power cord.
= Keep the power cord away from heat sources.
= Be sure to grasp the plug when disconnecting the power
cord. If the power cord is damaged, stop using it and
replace with a new one.
Ventilation
The slots and openings in the TV are provided for necessary
ventilation. To ensure reliable operation of the unit, and to
protect it from overheating, these slots and openings must
never be blocked or covered. Unless proper ventilation is
provided, the unit may gather dust and get dirty. For proper
ventilation, observe the following:
= Do not install the unit turned backward or sideways.
= Do not install the unit turned over or upside down.
= Never cover the slots and openings with a cloth or other
materials.
= Never block the slots and openings by placing the unit on a
bed, sofa, rug or other similar surface.
= Never place the unit in a confined space, such as a
bookcase or built-in cabinet, unless proper ventilation is
provided.
= Leave some space around the unit. Otherwise, adequate
air-circulation may be blocked, causing overheating, and
may cause fire or damage the unit.
Heat sources
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Important Safeguards
Do not use this apparatus near water
Safety checks
Do not use near a bathtub, washbowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
Do not use immediately after moving from a low temperature
to high temperature environment, as this causes
condensation, which may result in fire, electric shock, or other
hazards.
This apparatus should not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
should be placed on the apparatus.
Upon completion of service or repair work, request the service
technician to perform safety checks to ensure that the product
is in proper operating condition.
Entering of objects and liquids
Never insert an object into the product through vents or
openings. High voltage flows in the product, and inserting an
object can cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid on the
product.
Lightning
Unplug this apparatus during lightning storms or when
unused for long periods of time.
For added protection during a lightning storm, or when left
unattended and unused for long periods of time, unplug the
apparatus from the wall outlet and disconnect the antenna.
This will prevent damage to the equipment due to lightning
and power-line surges.
Servicing
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Replacement parts
In case the product needs replacement parts, make sure the
service person uses replacement parts specified by the
manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts
can result in fire, electric shock and/or other danger.
Attachments
Only use attachments/accessories specified by the
manufacturer. Do not use attachments not recommended by
the manufacturer. Use of improper attachments can result in
accidents.
Wall or ceiling mounting
When mounting the product on a wall or ceiling, be sure to
install the product according to the method recommended by
the manufacturer. This is a safety feature.
Panel protection
The panel used in this product is made of glass. Therefore, it
can break when the product is dropped or impacted upon by
other objects. Be careful not to be injured by broken glass
pieces if the panel breaks.
Pixel defect
The panel is a very high-technology product, giving you finely
detailed pictures. Occasionally, a few non-active pixels may
appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your
product.
Antennas
Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precautions
below. An outdoor antenna system should not be located in
the vicinity of overhead power lines or other electric light or
power circuits, or where it can come in contact with such
power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING POWER LINES OR CIRCUITS AS
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in USA and
Section 54 of the Canadian Electrical Code in Canada
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
Damage requiring service
If any of the following conditions occurs, unplug the power
cord from the AC outlet and request a qualified service person
to perform repairs.
a. The power cord or plug is damaged.
b. Liquid is spilled on the product or when objects have fallen
into the product.
c. The product has been exposed to rain or water.
d. The product does not operate properly as described in the
operating instructions.
Do not touch the controls other than those described in the
operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which
often requires extensive adjustment work by a qualified
technician.
e. The product has been dropped or the cabinet has been
damaged in any way.
f. The product displays an abnormal condition or exhibits a
distinct change in performance. Any noticeable abnormality
in the product indicates that the product needs servicing.
Antenna Grounding According to the National
Electrical Code, ANSI/NFPA 70
Antenna lead-in wire
Ground clamps
Antenna discharge unit
(NEC Section 810-20)
Electric service
equipment
NEC: National Electrical Code
Grounding conductors
(NEC Section 810-21)
Ground clamps
Power service grounding
electrode system
(NEC Art 250 Part H)
3
Table of Contents
Important Information ..............................................................................................................................1
Important Safeguards...............................................................................................................................2
Table of Contents......................................................................................................................................4
Introducing the TV ...................................................................................................................................6
Remove the TV from the Box............................................................................................................6
Installing the TV ................................................................................................................................6
Carrying or Moving the TV ................................................................................................................6
TV Controls and Connectors .........................................................................................................7
Control Panel ....................................................................................................................................7
TV Connectors ..................................................................................................................................8
Connecting the TV ....................................................................................................................................9
Basic Connections..........................................................................................................................9
Overview ...........................................................................................................................................9
Connecting Antenna System.............................................................................................................9
Connecting Cable System ................................................................................................................9
Connecting Cable Box ......................................................................................................................10
Connecting Digital Cable Box ...........................................................................................................10
Connecting Satellite Receiver...........................................................................................................11
Connecting Digital Satellite Receiver................................................................................................11
Using External Equipment .............................................................................................................12
Introduction .......................................................................................................................................12
Connecting a VCR for Playing Back .................................................................................................13
Connecting a VCR for Recording......................................................................................................13
Connecting a DVD Player with Component Video Connectors ........................................................14
Connecting a DVD Player with S-Video and Audio Connectors .......................................................15
Connecting a PC...............................................................................................................................16
Connecting a Camcorder or “PlayStation” ........................................................................................16
Connecting a Second TV or Monitor .................................................................................................17
Introducing the Remote Control..............................................................................................................18
Insert Batteries into the Remote Control...........................................................................................18
Using the Remote Control.................................................................................................................18
Button Descriptions...........................................................................................................................19
Getting Started ..........................................................................................................................................21
Connecting to your Power Supply ................................................................................................21
JE1907..............................................................................................................................................21
JE1907DC.........................................................................................................................................21
Turning On/Off ..................................................................................................................................22
Viewing Channels ...........................................................................................................................22
Selecting an Antenna Input Source...................................................................................................22
Auto Programming ............................................................................................................................22
Menu Navigation .............................................................................................................................23
Watching TV ..............................................................................................................................................24
Introducing Channel Number ............................................................................................................24
Selecting Channels ...........................................................................................................................24
Adjusting Volume ..............................................................................................................................25
Input Select .......................................................................................................................................25
Using the ZOOM button ....................................................................................................................25
4
Table of Contents
Adjusting MENU Options .........................................................................................................................27
Picture Control ................................................................................................................................27
Accessing the Picture Menu .............................................................................................................27
Adjusting Picture Settings .................................................................................................................27
Audio Control ..................................................................................................................................28
Accessing the Audio Menu................................................................................................................28
Selecting Audio Options....................................................................................................................28
Time Adjust......................................................................................................................................29
Accessing the Time Menu.................................................................................................................29
Selecting Time Options .....................................................................................................................29
Setting Channels.............................................................................................................................30
Accessing the Channel Menu ...........................................................................................................30
Selecting Channel Options ...............................................................................................................30
Setting Channel List..........................................................................................................................30
Editing Channel Label.......................................................................................................................31
Setting System ...............................................................................................................................32
Accessing the Option Menu ..............................................................................................................32
Setting Caption Vision.......................................................................................................................32
Using the CCD button .......................................................................................................................32
Parental Lock Control.....................................................................................................................33
Accessing the Lock Menu .................................................................................................................33
Selecting Lock Options .....................................................................................................................33
Viewing Locked or Blocked Programs ..............................................................................................34
Other Information .....................................................................................................................................35
Troubleshooting..............................................................................................................................35
Care and Maintenance....................................................................................................................37
Specifications..................................................................................................................................38
5
Introducing the TV
Remove the TV from
the Box
Installing the TV
STOP! To safely remove the television from the box,
use 2 people to provide stability.
1. Remove cardboard holders from the box.
2. Remove the cardboard. However, keep the wrapping
on the television to protect it while moving.
3. Lift onto the installation location, as illustrated.
Select a steady platform with good ventilation to place the TV.
= Keep enough space above and behind the Display.
= The TV should be installed near an easily accessible power outlet.
= To prevent internal heat buildup, do not block the ventilation openings.
= Do not install the TV in a hot or humid place, or in a place subject to excessive
dust or mechanical vibration.
= Be sure to take measures to prevent the TV from toppling over and causing
injury.
= To obtain the best picture, do not expose the screen to direct illumination or
direct sunlight. It is recommended to use spot lighting directed down from the
ceiling or to cover the windows that face the screen with opaque drapery. It is
desirable to install the TV in a room where the floor and walls are not of a
reflective material.
Cautions:
= Do not install the TV in protruding locations.
= Do not install this unit in restaurants where oily vapors occur. Dust absorbing
oil may enter into the unit and damage the unit.
= Do not install this unit outdoors. If the unit is exposed to rain, it may result in fire
or electric shock.
= If you install the unit on a non-level surface, the unit may fall or drop and cause
injury or damage.
= If you place the unit on an unstable surface, the unit may fall and cause injury or
damage.
= Do not hang anything on the unit. If you do so, the unit may fall from the stand or
wall-mount bracket, causing damage or serious injury.
Carrying or Moving
the TV
6
= When you move the TV, carry it by two or more people.
= When you move the TV, hold the upper and bottom frames of the TV, not the
speaker.
= As the glass surface of the TV has a special coating, be careful to avoid
touching the glass surface as much as possible.
= When transporting, do not subject the unit to shocks or vibration, or excessive
force.
Introducing the TV
TV Controls and Connectors
Control Panel
CH
3
CH
VOL
VOL
CH
MENU
INPUT
CH
4
VOL
1
VOL
5
2
MENU
6
INPUT
7
Item
Description
1 Power Indicator
2 Remote Sensor
Receives IR signals from the remote control.
3 POWER
Turn the unit on or off.
4 CH /CH
Press to scan through channels. In menu operations, these buttons serve as down/up buttons.
5 VOL /VOL
Press to adjust the volume. In menu operations, these buttons serve as left/right buttons.
6 MENU*
To access the Menu main page.
7 INPUT
To display the input source list .
*
In normal viewing, press the MENU button to access the Menu main page.
7
Introducing the TV
TV Connectors
TV Left Side
10
Item
1 Video OUT
Audio OUT
Description
Connects to your VCR to record programs as desired or connects to hook up a second TV or monitor.
Only analog TV programs, AV input source and S-Video input source can be output through the
AV output jacks.
3 Component Video
Connect to your DVD player’s or digital set-top box’s component video (YPbPr) and audio (L/R) jacks.
Component video provides better picture quality than the S-VIDEO or the composite video
connections.
4 Composite Video IN
Connect to the composite video output jack on your VCR or other video device.
2 Component Audio
Composite Audio IN Connect to the composite audio output jacks on your VCR or other video device.
5 S-VIDEO input
Connects to the S-VIDEO output jack of your VCR or other video equipment that has S-VIDEO.
S-VIDEO provides better picture quality than the composite video connection.
6 RF IN
RF input that connects to your cable system or outdoor antenna.
7 D-Sub IN
Connects to a PC or other Analog RGB devices such as Video Conferencing or Set-top Boxes.
8 Audio IN for
D-Sub interface
Use this audio input when you are using D-Sub connection.
9 Update
Software upgrade port for service only.
10 Power Converter
Converts120V AC or 12V DC power, depending on the model.
8
Connecting the TV
Basic Connections
Overview
To display clear, crisp pictures, you must connect your TV correctly and choose
the correct display format. It is strongly recommended to connect the cable and
antenna input using a 75-ohm coaxial cable to receive an optimum picture quality
signal. A 300-ohm twin lead cable can be easily affected by radio noise and the
like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it
as far away as possible from the TV.
The way in which you connect your TV will vary, depending on how your home
receives a signal (antenna and satellite; cable and cable box).
Do not use an indoor antenna, which is especially susceptible to radio noise.
Disconnect all power sources before making any connections.
Connecting Antenna
System
For best results, use this connection if you have an antenna system.
TV Left Side
D-SUB IN
UPDATE
AUDIO
PIC
RF
Antenna cable
Be sure to choose "Air” before you start Auto Program. See chapter "Getting
Started" for details.
For best results, use this connection if you have a cable system.
TV Left Side
D-SUB IN
AUDIO
PIC
RF
CATV cable
UPDATE
Connecting Cable
System
Be sure to choose "Cable" before you start Auto Program. See chapter
"Getting Started" for details.
9
Connecting the TV
Basic Connections
Connecting Cable Box
For best results, use this connection if you have a cable system and your cable
company scrambles some channels, such as premium channels or all channels
(which requires you to use a cable box).
Connect the CATV cable to the cable box’s input jack. Then use a coaxial cable to
connect the cable box’s output jack to the TV’s RF input jack.
TV Left Side
CATV cable
AUDIO
D-SUB IN
PIC
RF
Coaxial Cable
IN
UPDATE
OUT
Cable box
Be sure to choose "Cable" before you start Auto Program. See chapter
"Getting Started" for details.
Connecting Digital
Cable Box
Connect the RF coaxial cable from the CATV to the input of the digital cable box.
Use a component video cable to connect the YPbPr jacks of your digital cable box
to the TV’s component jacks.
Component video connection is necessary to view digital broadcastings in 1080i,
720p, 480i and 480p. This TV displays most picture formats.
The component jacks do not provide audio, so audio cables must be connected to
provide sound.
TV Left Side
VIDEO L - AUDIO - R
AV OUT
AV IN
Cr /Pr
COMPONENT IN
RF coaxial cable
L - AUDIO - R
Cb/Pb
Audio cable
Component video cable
D-SUB IN
UPDATE
AUDIO
PIC
RF
S-VIDEO
Y
VIDEO
L - AUDIO - R
Digital Cable Box
10
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
Connecting the TV
Basic Connections
Connecting Satellite
Receiver
Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
Use AV cables to connect the satellite receiver’s AUDIO and VIDEO OUT jacks to
the TV’s AUDIO and VIDEO IN jacks.
VIDEO L - AUDIO - R
AV OUT
AV IN
Cr /Pr
COMPONENT IN
Cb/Pb
L - AUDIO - R
Satellite Receiver
AV cable
S-VIDEO cable
Satellite
antenna
cable
S-VIDEO
Y
VIDEO
Cables are often colorcoded to connectors.
Connect red to red, white to
white, etc.
L - AUDIO - R
TV Left Side
If your satellite receiver is not equipped with S-VIDEO, use a VIDEO cable
(yellow) instead of the S-VIDEO cable.
Connect the RF coaxial cable from the satellite dish to the input of the digital
satellite receiver.
Use a component video cable to connect the YPbPr jacks of your digital satellite
receiver to the TV’s component jacks.
Component video connection is necessary to view digital broadcastings in 1080i,
720p, 480i and 480p. This TV displays most picture formats.
The component Jacks do not provide audio, so audio cables must be connected
to provide sound.
TV Left Side
Cr /Pr
VIDEO L - AUDIO - R
AV OUT
COMPONENT IN
Cb/Pb
L - AUDIO - R
AV IN
Component video cable
AUDIO
PIC
RF
S-VIDEO
Y
VIDEO
Audio cable
RF coaxial cable
D-SUB IN
L - AUDIO - R
Digital Satellite Receiver
UPDATE
Connecting Digital
Satellite Receiver
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
11
Connecting the TV
Using External Equipment
Introduction
You can connect many types of external equipment to your TV, including a DVD
player, VCR, Digital TV tuner, PC, game console or camcorder. To view external
source images, select the input source from INPUT on the remote control unit or
on the Display.
Notes and Cautions:
= Disconnect all power sources before making any connections.
= Carefully check the terminals for position and type before making any
connections.
= The packing contents of this TV may not include the cables or adaptors
mentioned in this chapter.
= Refer to your external equipment operation manual carefully before making
connections.
= Loose connectors can result in image or color problems. Make sure all
connectors are securely inserted into their terminals.
= Refer to your external equipment operation manual for the signal type.
= The illustration of the external equipment may be different depending on your
model.
12
Connecting the TV
Using External Equipment
Connecting a VCR for
Playing Back
Use AV cables to connect the VCR’s AV output jacks to the TV’s AV input jacks.
If your VCRs have S-VIDEO jacks, for best picture quality, use an S-VIDEO
connection instead of the video cable (yellow) on your combined A/V cable.
Use a S-VIDEO cable to connect the VCR’s S-VIDEO OUT jack to the TV’s SVIDEO IN jack. S-VIDEO does not provide audio, so audio cables must be
connected to provide sound.
VIDEO L - AUDIO - R
AV OUT
AV IN
Cr /Pr
COMPONENT IN
Cb/Pb
L - AUDIO - R
AV cable
S-VIDEO cable
UPDATE
AUDIO
D-SUB IN
PIC
RF
S-VIDEO
Y
VIDEO
L - AUDIO - R
TV Left Side
Cables are often
color-coded to
connectors.
Connect red to
red, white to
white, etc.
S-VIDEO
VCR
The S-video terminal share the same audio jacks with video.
Use AV cables to connect the VCR’s AV input jacks to the TV’s AV output jacks.
VCR for Recording
S-VIDEO
VIDEO L - AUDIO - R
AV OUT
AV IN
L - AUDIO - R
Cr /Pr
L - AUDIO - R
Cb/Pb
Y
COMPONENT IN
TV Left Side
VIDEO
Connecting a VCR for
Recording
AV cable
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
Only analog TV programs, AV and S-Video input sources can be output
through the AV output jacks.
13
Connecting the TV
Using External Equipment
Connecting a DVD
Player with Component
Video Connectors
Use a component video cable to connect the DVD player’s YPbPr jacks to the
TV’s YPbPr jacks.
Use an audio cable to connect the DVD player’s AUDIO OUT jacks to the TV’s
AUDIO IN jacks. Be sure to use the same row of inputs that you used for the video
connection.
Audio cable
VIDEO L - AUDIO - R
AV OUT
AV IN
Cr /Pr
COMPONENT IN
Cb/Pb
L - AUDIO - R
S-VIDEO
Y
VIDEO
L - AUDIO - R
TV Left Side
DVD Player
D-SUB IN
UPDATE
AUDIO
PIC
RF
Component video cable
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
The YPbPr jacks on your DVD player are sometimes labeled YCbCr, or Y, B-Y
and R-Y. If so, connect the cables to like colors.
14
Connecting the TV
Using External Equipment
Use an AV cable to connect the DVD player’s AUDIO OUT jacks to the TV’s
AUDIO IN jacks.
Use a S-VIDEO cable to connect the DVD player’s S-VIDEO OUT jack to the TV’s
S-VIDEO IN jack.
VIDEO L - AUDIO - R
AV OUT
DVD Player
AV IN
L - AUDIO - R
Cr /Pr
AV cable
L - AUDIO - R
Cb/Pb
Y
VIDEO
COMPONENT IN
TV Left Side
S-VIDEO
Connecting a DVD
Player with S-Video
and Audio Connectors
S-VIDEO
cable
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
If your DVD player is not equipped with S-VIDEO, use a VIDEO cable (yellow)
instead of the S-VIDEO cable.
15
Connecting the TV
Using External Equipment
Connecting a PC
If you connect your PC to the TV, you can watch your personal computer’s display
on the TV.
When your PC is connected to the TV with the D-Sub cable and audio cable, you
can view and listen to the PC’s video and audio output on the TV.
VIDEO L - AUDIO - R
AV OUT
AV IN
Cr /Pr
COMPONENT IN
Cb/Pb
L - AUDIO - R
D-Sub cable
(analog RGB)
To monitor port
(15-pin D-Sub)
D-SUB IN
To audio output jack
UPDATE
AUDIO
PIC
RF
S-VIDEO
Y
VIDEO
L - AUDIO - R
TV Left Side
Audio cable
(stereo mini plugs)
Use an AV cable to connect the camcorder or “PlayStation” AV output jacks to the
Connecting a Camcorder TV’s AV input jacks.
or “PlayStation”
Camcorder
“PlayStation”
or
VIDEO L - AUDIO - R
AV OUT
AV IN
L - AUDIO - R
Cr /Pr
L - AUDIO - R
Cb/Pb
Y
VIDEO
AV cable
S-VIDEO
COMPONENT IN
TV Left Side
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
16
Connecting the TV
Using External Equipment
The TV has a special signal output capability which allows you to hook up a
second TV or monitor.
Connect the second TV or monitor to the TV’s VCR output jacks.
See the Operating Manual of the second TV or monitor for further details
regarding that device’s input settings.
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
Second TV
or Monitor
VIDEO L - AUDIO - R
AV OUT
L - AUDIO - R
AV
IN
AV cable
AV IN
b
b
r
r
CC
/P/P C C
/P/P
COMPONENT IN
TV Left Side
YY
Connecting a Second
TV or Monitor
Only analog TV programs, AV and S-Video input sources can be output
through the AV output jacks.
17
Introducing the Remote Control
Insert Batteries into
the Remote Control
Insert two size AAA batteries by matching the
diagram inside the battery compartment.
and
on the batteries to the
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion.
Be sure to follow the instructions below.
= Place batteries with their terminals corresponding to the (+) and (–) indications.
= Different types of batteries have different characteristics. Do not mix batteries
of different types.
= Do not mix old and new batteries. Mixing old and new batteries can shorten the
life of new batteries and/or cause old batteries to leak chemicals.
= Remove batteries as soon as they are non-operable. Chemicals that leak from
batteries can cause a rash. If chemical leakage is found, wipe with a cloth.
= The batteries supplied with the product may have a shorter life expectancy due
to storage conditions.
= If the remote control is not used for an extended period of time, remove the
batteries from the remote control.
Using the Remote
Control
Use the remote control by pointing it towards the remote sensor window of the
set. Objects between the remote control and sensor window may prevent proper
operation.
Cautions regarding use of remote control
CH5
CH6
= Do not expose the remote control to shock.
In addition, do not expose the remote
control to liquids, and do not place in an
area with high humidity.
= Do not install or place the remote control
under direct sunlight. The heat may cause
deformation of the unit.
= The remote control may not work properly if
the remote sensor window of the main unit
is under direct sunlight or strong lighting. In
such a case, change the angle of the
lighting or TV set, or operate the remote
control closer to the remote sensor window.
VOL4
VOL3
MENU
INPUT
POWER
TV
DVD
MUTE
VOL
+
CH
+
RECALL
INFO
MENU
OK
EXIT
GUIDE
INPUT
FREEZE
EJECT
ANGLE
PROG
T/F
1
2
3
4
5
6
7
8
9
0
AS/PS
MTS/SAP
RPT
LIST
SETUP
ZOOM
CCD
SLOW
SUB-T
DISP
AUDIO
PICTURE
SOUND
TITLE
FAVORITE
EQ
SLEEP
This above illustration is for reference only. The remote sensor may be in
different locations on different models.
18
Introducing the Remote Control
Button Descriptions
Button
Description
1 POWER
Turn the unit on or off.
2 DVD, TV
To switch control between the TV and DVD
player (if attached).
If your remote control does not work
correctly when you operate the unit, press
the TV button.
POWER
TV
1
DVD
2
+
7
CH
6
MENU
+
RECALL
MUTE
VOL
INFO
8
9
11
10
12
OK
14
13
INPUT
4
EJECT
ANGLE
PROG
T/F
1
2
3
4
5
6
7
8
9
0
5
3
AS/PS
MTS/SAP
ZOOM
CCD
SLEEP
RPT
SLOW
SUB-T
DISP
LIST
FAVORITE
AUDIO
PICTURE
SETUP
EQ
SOUND
TITLE
buttons
4 INPUT/
Use these number buttons to select channel or
input password.
To display the INPUT source list.
EJECT
5 Dash (-)/
T/F
EXIT
GUIDE
3 0-9 number
To enter a program number for multiple program
channels such as 2-1,2-2, etc.
6 RECALL
To switch between the currently tuned channel
and the previously tuned channel.
7 CH+, CH-
To select channels upward or downward.
8 VOL+, VOL-
To adjust volume.
9 MUTE
To mute the sound.
10 MENU
To access the Menu main page.
11 INFO
To access the program information.
12 ▲,▼,
To move upward or downward in menu
operation;
◄, ►,
To move left or right in menu operation;
To adjust selected menu item in menu operation;
OK
To confirm or alter the settings of the selected
menu item.
13 GUIDE
To access the program guide.
14 EXIT
To exit menu.
19
Introducing the Remote Control
Button
Button Descriptions
POWER
TV
DVD
MUTE
VOL
+
CH
+
RECALL
INFO
MENU
OK
EXIT
GUIDE
Description
15 ZOOM
To select a screen aspect ratio.
16 CCD
To select closed caption mode.
17 MTS/SAP
To select a stereo, sap or mono for analog
channels; also used to select audio track for
digital channels.
18 SLEEP
To set sleep timer.
19 LIST
To access the master channel list.
20 PICTURE
To select a preset picture mode.
21 FAVORITE
To access the favorite channel list.
22 AUDIO
To select a preset sound mode.
INPUT
EJECT
ANGLE
PROG
T/F
1
2
3
4
5
6
7
8
9
0
NOTE: The buttons without descriptions are not active.
AS/PS
15
17
MTS/SAP
ZOOM
CCD
SLEEP
RPT
SLOW
SUB-T
DISP
LIST
FAVORITE
AUDIO
PICTURE
SETUP
EQ
SOUND
TITLE
16
18
19
20
21
22
20
Getting Started
Connecting to your Power Supply
JE1907
JE1907DC
The JE1907 is equipped with a polarized AC power cord plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug still fails to fit, contact your electrician to have a suitable outlet installed. Do not defeat
the safety purpose of the polarized plug by forcing it in.
The JE1907DC is equipped with a 12V DC connector for use in a vehicle. Connect the red
wire to the 12V DC connection and the black wire to the ground terminal or clean
unpainted metal part of chassis..
21
Getting Started
Turning On/Off
Turning On
First, connect the power correctly..
Press
on the TV or POWER
on the remote control.
Never attempt to move the TV Turning Off
unless the power cord has Press on the TV or POWER on the remote control.
been disconnected.
The TV enters standby mode and the image on the screen disappears.
The TV will still consume some power as long as the power cord is still
inserted into the power outlet.
If you are not going to use this TV for a long period of time, be sure to remove
the power cord from the power outlet.
Viewing Channels
Selecting an Antenna
Input Source
Before you begin watching television, you must first select the
antenna source and allow the television to perform auto
programming.
1.
2.
3.
4.
Press the MENU button on the remote control.
Press the ◄ / ► to select the CHANNEL menu.
Press▼to access and [Antenna] item will be highlighted.
Press the ◄ / ► to select [Air] or [Cable] according to what
kind of connection is made with your TV.
4. Press▼to select [Auto Scan] and ► to confirm and
continue.
DTV signal
– If you choose [Air], please select [Start to Scan] item and
press ► to confirm, then the TV starts Auto Program
automatically.
– If you choose [Cable], there are 3 kinds of Cable systems,
including STD, IRC and HRC. Select [Auto] if unsure.
(When you select [Auto], the unit automatically detects the
proper cable source. If the unit fails to detect the type of
cable system, please consult with your cable TV company
to determine the proper system and enter this
information.) Then please select [Start to Scan] item and
press ► to confirm, the TV starts Auto Program
automatically.
5. During the process of the auto search, you can press MENU or EXIT to exit.
Auto Programming
22
Operate according to the steps 1-4 above , the unit automatically begins auto
program. Auto Program may take a while to complete and a progress bar is
displayed while available channels are being scanned. If you select [MENU] or
[EXIT] to cancel the Auto Program before all receivable channels are scanned,
you should run Auto Program at a later time to be sure all available channels are
received. Auto Program will create a list of receivable channels for the current
input. You will be required to run Auto Program for RF input to create a list of
available channels.
Getting Started
Menu Navigation
MENU
1.
Press to display the Main menu.
Press to highlight the menu items.
2.
OK
3.
OK
Press to enter the sub-menu field.
Press to select items in the sub-menu.
Press to adjust the selected items or enter the sub-menu.
4.
OK
Press to confirm your operation or alter the settings for some items such as [INPUT].
MENU
5.
Press to return to the previous screen.
EXIT
6.
Press to return to normal picture.
23
Watching TV
Introducing Channel
Number
Selecting Channels
This television is capable of receiving the full range of cable-TV channels
available today, from the most digital and HDTV channels, to the traditional
analog channels.
As the transition toward full digital TV continues, some cable-TV systems in the
USA will have a mixture of analog and digital channels in their lineups. So in most
situations the ATSC PSIP channel number is composed of a major channel
number and a minor channel number. The major channel number is same for
both analog and digital channels (It is equal to the NTSC channel number for
existing broadcasters). An analog channel usually has a minor channel number
of zero, while a digital channel usually has a minor channel number of 1, 2 or
larger.
You can select analog channels in several ways.
Method 1 - Using CH+/CH- on the remote control
or CH▲/CH▼on the TV
+
CH
Press the CH+/CH- or CH▲/CH▼ to cycle among all
available channels. Only those channels marked with a tick
symbol can be selected by the CH+/CH- or CH▲/CH▼
button.
Method 2 - Using RECALL on the remote control
Press RECALL to switch to the previously tuned channel.
Press RECALL again to switch back to the currently tuned
channel.
RECALL
Method 3 - Using 0-9, dash(-) and OK on the remote control
For analog TV channels
Press the 0-9 number buttons to input a channel
number and confirm with OK to select up to 125
channels for VHF/UHF/CATV.
For digital TV channel
Press the 0-9 number buttons and dash(-) to input a
digital channel number, the TV goes to the selected
channel directly.
(e. g., channel 8-3, just press 8, - and 3 one by one)
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
If you enter channel number with 0-9 only (without
pressing OK), channel selection will be made if
there is no operation for a few seconds.
T/F
Method 4 - Using master channel list
Press the LIST button to display the master channel list, you
may select channel with the ▲▼and OK buttons.
LIST
SETUP
Method 5 - Using favorite channel list
Press the FAVORITE button to display a desired favorite
channel list, you may select channel with the ▲▼and OK
buttons.
24
FAVORITE
EQ
Watching TV
Adjusting Volume
Using VOL+ or VOL- on the remote control or on the TV
Press the VOL+ or VOL- to increase or decrease the volume.
Using MUTE on the remote control
Press MUTE to mute the sound. Press it again to cancel the
mute.
Input Select
Press the INPUT button on the remote control and select the
input source with the ▲▼and OK/►buttons. The INPUT
SOURCE options is shown below.
+
VOL
MUTE
INPUT
Select to view TV programs
Select to view programs from AV inputs.
Select to view programs from S-video inputs.
Select to view programs from Component inputs.
Select to view programs from D-Sub input.
Using the ZOOM button
Press ZOOM repeatedly to choose a proper screen aspect
ratio. The following mode may available for your choice.
ZOOM
SLOW
Normal
The zoom mode options may Select to match the source’s image.( 4:3 to 4:3, 16:9 to 16:9)
differ from different formats of
the input signal.
Normal
Example:
Source
Final
When you choose NORMAL to view a 4:3 program, two black bars keep on
the two sides of the screen.
For additional protection to the screen, when you are viewing a 4:3 program,
please DO NOT use the NORMAL feature for a long period of time.
25
Watching TV
Using the ZOOM button
Full Screen
Select to enlarge the 4:3 picture horizontally only, to fill the display area.
Full Screen
Example:
Source
Final
ZOOM
Select to enlarge the picture horizontally and vertically to an equal aspect ratio
that fills the wide screen.
ZOOM
Example:
Source
Final
Cinema
Select to view wide-screen DVDs in full screen.
Cinema
Example:
Source
26
Final
Adjusting MENU Options
Depending on the signal tuned, you may see different MENU options on your screen. For example, Menus displayed
below are based on TV mode.
Picture Control
Accessing the Picture Menu
MENU
1. Press MENU.................
2. Highlight the PICTURE icon.
Use ◄ or ► button.
3. Press ......................
To highlight an option and to change settings, press ▲▼◄ ►. Press EXIT to exit.
Adjusting Picture
Settings
Option
Picture Mode
Description
Select to choose a picture mode to best match the TV
environment, which can vary due to room brightness, type of
program watched or the type of image input from external
equipment.
Standard Select for a normal picture.
Dynamic Select for enhanced picture contrast and sharpness.
Soft
Select for a highly defined image in a normally bright room.
Personal Select to customize the picture as desired.
To quickly change the picture mode, press the PICTURE button repeatedly.
Contrast
Select to adjust picture contrast.
Brightness
Select to adjust picture brightness.
Sharpness
Select to adjust clarity of outline detail.
Color
Select to adjust picture color.
Tint
Select to adjust natural flesh tones. Used for 480i format only.
27
Adjusting MENU Options
Audio Control
Accessing the Audio Menu
MENU
1. Press MENU.................
2. Highlight the AUDIO icon.
Audio Language
:
English
Use ◄ or ► button.
3. Press ......................
To highlight an option and to change settings, press ▲▼◄ ►. Press EXIT to exit.
Selecting Audio
Options
Option
Sound Mode
Description
Personal Select to customize the audio as desired.
Movie
Select for a movie program.
Music
Select for a music program.
Standard Select for a normal program.
To quickly change the sound Bass, Treble &
mode, press the AUDIO button Balance
repeatedly.
Select to access an audio adjustment window.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
28
Audio Language
Select English, French or Spanish. Used for digital TV only.
After setting, the unit will choose the default audio track when you
switch to another channel.
Audio Channel
Toggle between L+R, L+L, and R+R.
Adjusting MENU Options
Time Adjust
Accessing the Time Menu
MENU
1. Press MENU.................
Clock
2. Highlight the TIME icon.
Use ◄ or ► button.
3. Press ......................
To highlight an option and to change settings, press ▲▼◄ ►. Press EXIT to exit.
Selecting Time
Options
Option
Description
Sleep Timer
Press ◄ / ► to set the television to automatically turn off
after 15, 30, 60, 90, 120, 180 or 240 minutes. To cancel
the timer, select Off.
Time Zone
Press ◄ / ► to select a proper time zone according to
your area.
If you want to return to previous screen, press [MENU]
to return.
Daylight Saving Time
Press ◄ / ► to select [On] item if you want to observe
daylight saving, or you may select [Off] to abandon
daylight saving.
Clock
Displays the current day/time determined by the
selected Time Zone. The time is set automatically from
the digital TV source.
29
Adjusting MENU Options
Setting Channels
Accessing the Channel Menu
MENU
1. Press MENU..................
2. Highlight the CHANNEL icon.
Use ◄ or ► button.
DTV Signal
:
3. Press ......................
To highlight an option and to change settings, press ▲▼◄ ►. Press EXIT to exit.
Selecting Channel
Options
Setting Channel List
Option
Description
Antenna
Choose "Air" for antenna usage or "Cable" for cable TV or
satellite.
Auto Scan
You may need to run Auto Program manually if you first use
this unit.
Favorite
Allows you to set up favorite channels.
Show/Hide
Select to display all available channels scanned by Auto
Program or hide the dislike channels . See "Setting Channel
List" on this page.
Channel No.
Displays selected channel number.
Channel Label
Allows you to assign labels (such as station call letters) to a
selected channel. See "Editing Channel Label” on the next
page.
DTV Signal
This shows that the channel is a Digital (HD) station and
gives the signal strength.
In the [Show/Hide List] window, you may mark
or unmark the desired channels. Only those
channels marked with a tick symbol can be
selected by the CH+ or CH- button. The
unmarked channel(s) can only be selected
using the 0-9 number buttons.
You can also access the master channel list by pressing the LIST button.
30
Adjusting MENU Options
Setting Channels
Editing Channel Label
DTV Signal
:
Press ►
button.
Press OK
button.
The unit allows you to assign a label to all available channels as desired using the
Channel Label feature. Under the CHANNEL menu, select the Channel No. you
want to rename. Use ▲▼◄ and ► buttons to input a name in the Channel Label
field. Press OK when finished.
31
Adjusting MENU Options
Setting System
Accessing the Option Menu
MENU
1. Press MENU..................
Advance
:
2. Highlight the OPTION icon.
Use ◄ or ► button.
3. Press ......................
To highlight an option and to change settings, press ▲▼◄ ►. Press EXIT to exit.
Setting Caption Vision
Option
Description
Menu Language
Allows you to select an on-screen menu language. Select
from English, French and Spanish.
Color Temp
Choose from the following color temperatures:
Select to give the white colors a blue tint.
Cool
Normal Select to give the white colors a neutral tint.
Warm Select to give the white colors a red tint.
Closed Caption
Allows you to set closed captioning to Basic ( EIA-608) or
Advanced (EIA-708). Select from [Basic Selection] and
[Advanced Selection].
Restore Default
Select to reset display settings to the defaults. Please make
sure that you want reset all settings to the factory defaults
before you perform this operation. The channels information
will be lost. You must auto program again.
WARNING: Running the [Restore Default] item will clear all of your
customized settings.
Using the CCD button
Option
On
Press the CCD button repeatedly to
select [Off], [On] or [CCD On Off
Mute].
CCD On Mute
32
Description
Select to turn on the Closed Captions.
Select to turn off the Closed Captions.
Select to turn on the Closed Captions when the TV is muted.
Adjusting MENU Options
Parental Lock Control
The rating control gives parents control over broadcasts which are accessed by their children. It
allows parents to select programs judged suitable for child viewing while blocking once judged not
suitable. It does so automatically once activated. See "Selecting Locks Options " on the next page.
Accessing the Lock Menu
MENU
1. Press MENU.................
2. Highlight the LOCK icon.
Use
or
RRT Setting
button.
:
3. Press ......................
4. Enter a correct password.
Use 0-9 number buttons.
If it is the first time to access the [Lock ] menu, the unit allows you to use a default number as “0000”.
Once the correct password is entered, the [Lock ] menu displays as above.
To highlight an option and to change settings, press ▲▼◄ ►. Press EXIT to exit.
Selecting Lock
Options
Option
Description
Change Password
Select to change password as desired. The old password is
necessary if you want to change the password.
System Lock
ON
Select to enable the parental lock control.
OFF
Select to disable the parental lock control.
US
Set US custom rating restrictions.
Canada
Set Canadian custom rating restrictions.
RRT Setting
If the broadcasting program uses RRT5(Rateing Region
Table-Region 5) criteria rating in accordance with the FCC
Rules, its rating can be down loaded to this TV and can be
used for parental controls.
Rest RRT
Select to reset RRT5 Version information to the default.
33
Adjusting MENU Options
Parental Lock Control
Selecting Locks
Options
US Custom Rating Options
Option
Description
Age-Based Options
TV
All children.
To ensure maximum blocking Block programs by their TV-Y
rating, content or both.
capability, the age-based
Directed to children age 7 and older.
TV-Y7
ratings should be used.
General audience.
TV-G
TV-PG
Parental guidance suggested.
TV-14
Parents strongly cautioned.
TV-MA
Mature audience only.
Content-Based Options
MPAA
ALL
Select all content-based options for Age rating.
FV
Fantasy violence.
V
Violence.
S
Sexual situations.
L
Strong language.
D
Suggestive Dialog.
G
All children and general audiences.
PG
Parental guidance suggested.
PG-13
Parental guidance for children under 13.
R
Restricted viewing, parental guidance is suggested for
children under 17.
NC-17
No one 17 and under admitted.
X
X is an older rating that is unified with NC-17 but may be
encoded in the data of older movies.
Canadian Custom Rating Options
Option
Canada Eng (English)
Canada Fre (French)
Description
C
All children.
C8+
Children 8 years and older.
G
General programming.
PG
Parental guidance.
14+
Viewers 14 and older.
18+
Adult programming.
G
General programming.
8 ans+
Not recommended for ages under 8.
13 ans+ Not recommended for ages under 13.
16 ans+ Not recommended for ages under 16.
18 ans+ Adult programming.
The content ratings will increase depending on the level of the age-based
rating. For example, a program with a TV-PG V (Violence) rating may
contain moderate violence, while a TV-14 V (Violence) rating may contain
more intense violence.
Viewing Locked or
Blocked Programs
34
You can view a locked or blocked program by entering the secret number.
1. Tuned to a locked or blocked program.
2. Enter your secret number using the 0-9 buttons.
Parental Lock will be canceled temporarily until you turn your TV off.
Other Information
Troubleshooting
If, after reading these operating instructions, you have additional questions related to the use of your television,
please call the service center in your area. Before calling service, please check the below symptoms and follow
suggested solutions.
Remote Control
Problem
Remote control does not operate
Possible Solutions
● The batteries could be weak. Replace the batteries.
● Check the orientation of the batteries.
● Make sure the power cord is plugged in.
Video and Audio
Problem
Possible Solutions
No picture (screen not lit),
No sound
●
●
●
●
Dark, poor or no picture
(Screen lit), good sound
● Select a proper picture mode.
● Adjust the brightness in the video setting.
● Check the antenna/cable connections.
No color/dark picture/color
Is not correct
● Adjust the color saturation in the video setting.
Only snow and noise appear
On the screen
● Check the antenna/cable connections.
● Try another channel; it could be station trouble.
Dotted lines or stripes
● Adjust the antenna.
● Move the TV away from noise sources such as cars, neon signs, or hair dryers.
Double images
● Using a highly directional outdoor antenna or a cable may solve the problem.
“Black box” on screen
● You have selected a text option in the Setup setting and no text is available. Please try
to turn off the Close Caption feature or select CC1 instead of Text1-4.
Good picture, no sound
● The sound may be muted. Press MUTE again to cancel.
● Make sure the stereo mode is set to stereo or mono.
Audio noise
● Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the TV. Move the infrared communication
equipment away from the TV until the noise is eliminated.
Make sure the power cord is plugged in.
Press POWER on the TV or on the remote control.
Select correct input source.
Try another channel; it could be station trouble.
35
Other Information
Troubleshooting
General
Problem
Possible Solutions
One or some channels can’t be ● These channels may be locked. Please unlock them (see Lock settings).
● These channels may be set to hidden in the master channel list. You may mark them
displayed
with the tick symbol to cancel hidden or select them with 0-9 number buttons.
Lost password
● On the password screen, enter the following master password: 1397. You may use the
master password to set a new password as desired. Please remember your new
password and keep it carefully.
Some items can’t be accessed
● If a setting option appears in gray, this indicates that the settings option is unavailable
in current input mode.
TV cabinet creaks
● When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not a
malfunction.
Control buttons do not operate
● Disconnect the power cord and wait for a few seconds. Then re-plug the power cord
and turn on the unit again.
Notes:
If your problem is not solved, turn your unit off and then on again.
Cautions:
Never attempt to repair a defective TV yourself.
36
Other Information
Care and Maintenance
About After-Image
The extended use of fixed image program material can cause a permanent after-image
on the screen.
This background image is viewable on normal programs in the form of a stationary fixed
image. This type of irreversible screen deterioration can be limited by observing the
following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Important Information Regarding Use of Video Games, Computers,
Captions or Other Fixed Image Displays.
● Do not allow a still picture to be displayed for an extended period, as this can cause a
permanent after-image to remain on the screen.
Examples of still pictures include logos, video games, computer images, teletext and
images displayed in 4:3 mode.
CAUTIONS:
● The permanent after-image on the screen resulting from fixed image use is not an
operating defect and as such is not covered by the warranty.
● This product is not designed to display fixed images for extended periods of time.
Cleaning and
Maintenance
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or
a weak detergent solution.
● Use eyeglass cleaner to remove stubborn dirt from the screen.
● Never use alcohol, paint thinner or benzine to clean this unit.
● Before using a chemically treated cloth, read the instructions that came with the cloth
carefully.
37
Other Information
Specifications
Type:
LCD TV
Panel:
19" TFT LCD
TV system:
American TV standard ATSC/NTSC System
Receiving Channel:
VHF/UHF:
VHF 2-13ch, UHF 14-69ch
CATV:
1-125ch
Digital Terrestrial Broadcast:
2-69ch
Digital cable:
1-135ch
Audio multiplex:
BTSC System
Audio out:
2W × 2
Power Requirement (AC Version):
AC 120 V, 60Hz
Power Consumption (AC Version):
60 W
Power Requirement (DC Version):
9-20V DC
Power Consumption (DC Version):
5A at 12 VDC
Dimensions (W X H X D in inches):
21.34”W × 15”H × 4”D
Weight:
23 lbs
1
S-video:
1
Component Video/Audio(L/R):
1
D-Sub/Audio:
1
Antenna:
1
OUT
Composite Video/Audio(L/R):
1
Update
1
IN
Composite Video/Audio(L/R):
Control
Terminals:
● As part of policy of continuous improvement, the manufacturer reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
38
www.asaelectronics.com
Download PDF

advertising